summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/tty/serial/sh-sci.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/tty/serial/sh-sci.c')
-rw-r--r--kernel/drivers/tty/serial/sh-sci.c2730
1 files changed, 2730 insertions, 0 deletions
diff --git a/kernel/drivers/tty/serial/sh-sci.c b/kernel/drivers/tty/serial/sh-sci.c
new file mode 100644
index 000000000..e7d6566fa
--- /dev/null
+++ b/kernel/drivers/tty/serial/sh-sci.c
@@ -0,0 +1,2730 @@
+/*
+ * SuperH on-chip serial module support. (SCI with no FIFO / with FIFO)
+ *
+ * Copyright (C) 2002 - 2011 Paul Mundt
+ * Modified to support SH7720 SCIF. Markus Brunner, Mark Jonas (Jul 2007).
+ *
+ * based off of the old drivers/char/sh-sci.c by:
+ *
+ * Copyright (C) 1999, 2000 Niibe Yutaka
+ * Copyright (C) 2000 Sugioka Toshinobu
+ * Modified to support multiple serial ports. Stuart Menefy (May 2000).
+ * Modified to support SecureEdge. David McCullough (2002)
+ * Modified to support SH7300 SCIF. Takashi Kusuda (Jun 2003).
+ * Removed SH7300 support (Jul 2007).
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#undef DEBUG
+
+#include <linux/clk.h>
+#include <linux/console.h>
+#include <linux/ctype.h>
+#include <linux/cpufreq.h>
+#include <linux/delay.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/major.h>
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/notifier.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/scatterlist.h>
+#include <linux/serial.h>
+#include <linux/serial_sci.h>
+#include <linux/sh_dma.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/sysrq.h>
+#include <linux/timer.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+
+#ifdef CONFIG_SUPERH
+#include <asm/sh_bios.h>
+#endif
+
+#include "sh-sci.h"
+
+/* Offsets into the sci_port->irqs array */
+enum {
+ SCIx_ERI_IRQ,
+ SCIx_RXI_IRQ,
+ SCIx_TXI_IRQ,
+ SCIx_BRI_IRQ,
+ SCIx_NR_IRQS,
+
+ SCIx_MUX_IRQ = SCIx_NR_IRQS, /* special case */
+};
+
+#define SCIx_IRQ_IS_MUXED(port) \
+ ((port)->irqs[SCIx_ERI_IRQ] == \
+ (port)->irqs[SCIx_RXI_IRQ]) || \
+ ((port)->irqs[SCIx_ERI_IRQ] && \
+ ((port)->irqs[SCIx_RXI_IRQ] < 0))
+
+struct sci_port {
+ struct uart_port port;
+
+ /* Platform configuration */
+ struct plat_sci_port *cfg;
+ int overrun_bit;
+ unsigned int error_mask;
+ unsigned int sampling_rate;
+
+
+ /* Break timer */
+ struct timer_list break_timer;
+ int break_flag;
+
+ /* Interface clock */
+ struct clk *iclk;
+ /* Function clock */
+ struct clk *fclk;
+
+ int irqs[SCIx_NR_IRQS];
+ char *irqstr[SCIx_NR_IRQS];
+
+ struct dma_chan *chan_tx;
+ struct dma_chan *chan_rx;
+
+#ifdef CONFIG_SERIAL_SH_SCI_DMA
+ struct dma_async_tx_descriptor *desc_tx;
+ struct dma_async_tx_descriptor *desc_rx[2];
+ dma_cookie_t cookie_tx;
+ dma_cookie_t cookie_rx[2];
+ dma_cookie_t active_rx;
+ struct scatterlist sg_tx;
+ unsigned int sg_len_tx;
+ struct scatterlist sg_rx[2];
+ size_t buf_len_rx;
+ struct sh_dmae_slave param_tx;
+ struct sh_dmae_slave param_rx;
+ struct work_struct work_tx;
+ struct work_struct work_rx;
+ struct timer_list rx_timer;
+ unsigned int rx_timeout;
+#endif
+
+ struct notifier_block freq_transition;
+};
+
+/* Function prototypes */
+static void sci_start_tx(struct uart_port *port);
+static void sci_stop_tx(struct uart_port *port);
+static void sci_start_rx(struct uart_port *port);
+
+#define SCI_NPORTS CONFIG_SERIAL_SH_SCI_NR_UARTS
+
+static struct sci_port sci_ports[SCI_NPORTS];
+static struct uart_driver sci_uart_driver;
+
+static inline struct sci_port *
+to_sci_port(struct uart_port *uart)
+{
+ return container_of(uart, struct sci_port, port);
+}
+
+struct plat_sci_reg {
+ u8 offset, size;
+};
+
+/* Helper for invalidating specific entries of an inherited map. */
+#define sci_reg_invalid { .offset = 0, .size = 0 }
+
+static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
+ [SCIx_PROBE_REGTYPE] = {
+ [0 ... SCIx_NR_REGS - 1] = sci_reg_invalid,
+ },
+
+ /*
+ * Common SCI definitions, dependent on the port's regshift
+ * value.
+ */
+ [SCIx_SCI_REGTYPE] = {
+ [SCSMR] = { 0x00, 8 },
+ [SCBRR] = { 0x01, 8 },
+ [SCSCR] = { 0x02, 8 },
+ [SCxTDR] = { 0x03, 8 },
+ [SCxSR] = { 0x04, 8 },
+ [SCxRDR] = { 0x05, 8 },
+ [SCFCR] = sci_reg_invalid,
+ [SCFDR] = sci_reg_invalid,
+ [SCTFDR] = sci_reg_invalid,
+ [SCRFDR] = sci_reg_invalid,
+ [SCSPTR] = sci_reg_invalid,
+ [SCLSR] = sci_reg_invalid,
+ [HSSRR] = sci_reg_invalid,
+ },
+
+ /*
+ * Common definitions for legacy IrDA ports, dependent on
+ * regshift value.
+ */
+ [SCIx_IRDA_REGTYPE] = {
+ [SCSMR] = { 0x00, 8 },
+ [SCBRR] = { 0x01, 8 },
+ [SCSCR] = { 0x02, 8 },
+ [SCxTDR] = { 0x03, 8 },
+ [SCxSR] = { 0x04, 8 },
+ [SCxRDR] = { 0x05, 8 },
+ [SCFCR] = { 0x06, 8 },
+ [SCFDR] = { 0x07, 16 },
+ [SCTFDR] = sci_reg_invalid,
+ [SCRFDR] = sci_reg_invalid,
+ [SCSPTR] = sci_reg_invalid,
+ [SCLSR] = sci_reg_invalid,
+ [HSSRR] = sci_reg_invalid,
+ },
+
+ /*
+ * Common SCIFA definitions.
+ */
+ [SCIx_SCIFA_REGTYPE] = {
+ [SCSMR] = { 0x00, 16 },
+ [SCBRR] = { 0x04, 8 },
+ [SCSCR] = { 0x08, 16 },
+ [SCxTDR] = { 0x20, 8 },
+ [SCxSR] = { 0x14, 16 },
+ [SCxRDR] = { 0x24, 8 },
+ [SCFCR] = { 0x18, 16 },
+ [SCFDR] = { 0x1c, 16 },
+ [SCTFDR] = sci_reg_invalid,
+ [SCRFDR] = sci_reg_invalid,
+ [SCSPTR] = sci_reg_invalid,
+ [SCLSR] = sci_reg_invalid,
+ [HSSRR] = sci_reg_invalid,
+ },
+
+ /*
+ * Common SCIFB definitions.
+ */
+ [SCIx_SCIFB_REGTYPE] = {
+ [SCSMR] = { 0x00, 16 },
+ [SCBRR] = { 0x04, 8 },
+ [SCSCR] = { 0x08, 16 },
+ [SCxTDR] = { 0x40, 8 },
+ [SCxSR] = { 0x14, 16 },
+ [SCxRDR] = { 0x60, 8 },
+ [SCFCR] = { 0x18, 16 },
+ [SCFDR] = sci_reg_invalid,
+ [SCTFDR] = { 0x38, 16 },
+ [SCRFDR] = { 0x3c, 16 },
+ [SCSPTR] = sci_reg_invalid,
+ [SCLSR] = sci_reg_invalid,
+ [HSSRR] = sci_reg_invalid,
+ },
+
+ /*
+ * Common SH-2(A) SCIF definitions for ports with FIFO data
+ * count registers.
+ */
+ [SCIx_SH2_SCIF_FIFODATA_REGTYPE] = {
+ [SCSMR] = { 0x00, 16 },
+ [SCBRR] = { 0x04, 8 },
+ [SCSCR] = { 0x08, 16 },
+ [SCxTDR] = { 0x0c, 8 },
+ [SCxSR] = { 0x10, 16 },
+ [SCxRDR] = { 0x14, 8 },
+ [SCFCR] = { 0x18, 16 },
+ [SCFDR] = { 0x1c, 16 },
+ [SCTFDR] = sci_reg_invalid,
+ [SCRFDR] = sci_reg_invalid,
+ [SCSPTR] = { 0x20, 16 },
+ [SCLSR] = { 0x24, 16 },
+ [HSSRR] = sci_reg_invalid,
+ },
+
+ /*
+ * Common SH-3 SCIF definitions.
+ */
+ [SCIx_SH3_SCIF_REGTYPE] = {
+ [SCSMR] = { 0x00, 8 },
+ [SCBRR] = { 0x02, 8 },
+ [SCSCR] = { 0x04, 8 },
+ [SCxTDR] = { 0x06, 8 },
+ [SCxSR] = { 0x08, 16 },
+ [SCxRDR] = { 0x0a, 8 },
+ [SCFCR] = { 0x0c, 8 },
+ [SCFDR] = { 0x0e, 16 },
+ [SCTFDR] = sci_reg_invalid,
+ [SCRFDR] = sci_reg_invalid,
+ [SCSPTR] = sci_reg_invalid,
+ [SCLSR] = sci_reg_invalid,
+ [HSSRR] = sci_reg_invalid,
+ },
+
+ /*
+ * Common SH-4(A) SCIF(B) definitions.
+ */
+ [SCIx_SH4_SCIF_REGTYPE] = {
+ [SCSMR] = { 0x00, 16 },
+ [SCBRR] = { 0x04, 8 },
+ [SCSCR] = { 0x08, 16 },
+ [SCxTDR] = { 0x0c, 8 },
+ [SCxSR] = { 0x10, 16 },
+ [SCxRDR] = { 0x14, 8 },
+ [SCFCR] = { 0x18, 16 },
+ [SCFDR] = { 0x1c, 16 },
+ [SCTFDR] = sci_reg_invalid,
+ [SCRFDR] = sci_reg_invalid,
+ [SCSPTR] = { 0x20, 16 },
+ [SCLSR] = { 0x24, 16 },
+ [HSSRR] = sci_reg_invalid,
+ },
+
+ /*
+ * Common HSCIF definitions.
+ */
+ [SCIx_HSCIF_REGTYPE] = {
+ [SCSMR] = { 0x00, 16 },
+ [SCBRR] = { 0x04, 8 },
+ [SCSCR] = { 0x08, 16 },
+ [SCxTDR] = { 0x0c, 8 },
+ [SCxSR] = { 0x10, 16 },
+ [SCxRDR] = { 0x14, 8 },
+ [SCFCR] = { 0x18, 16 },
+ [SCFDR] = { 0x1c, 16 },
+ [SCTFDR] = sci_reg_invalid,
+ [SCRFDR] = sci_reg_invalid,
+ [SCSPTR] = { 0x20, 16 },
+ [SCLSR] = { 0x24, 16 },
+ [HSSRR] = { 0x40, 16 },
+ },
+
+ /*
+ * Common SH-4(A) SCIF(B) definitions for ports without an SCSPTR
+ * register.
+ */
+ [SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE] = {
+ [SCSMR] = { 0x00, 16 },
+ [SCBRR] = { 0x04, 8 },
+ [SCSCR] = { 0x08, 16 },
+ [SCxTDR] = { 0x0c, 8 },
+ [SCxSR] = { 0x10, 16 },
+ [SCxRDR] = { 0x14, 8 },
+ [SCFCR] = { 0x18, 16 },
+ [SCFDR] = { 0x1c, 16 },
+ [SCTFDR] = sci_reg_invalid,
+ [SCRFDR] = sci_reg_invalid,
+ [SCSPTR] = sci_reg_invalid,
+ [SCLSR] = { 0x24, 16 },
+ [HSSRR] = sci_reg_invalid,
+ },
+
+ /*
+ * Common SH-4(A) SCIF(B) definitions for ports with FIFO data
+ * count registers.
+ */
+ [SCIx_SH4_SCIF_FIFODATA_REGTYPE] = {
+ [SCSMR] = { 0x00, 16 },
+ [SCBRR] = { 0x04, 8 },
+ [SCSCR] = { 0x08, 16 },
+ [SCxTDR] = { 0x0c, 8 },
+ [SCxSR] = { 0x10, 16 },
+ [SCxRDR] = { 0x14, 8 },
+ [SCFCR] = { 0x18, 16 },
+ [SCFDR] = { 0x1c, 16 },
+ [SCTFDR] = { 0x1c, 16 }, /* aliased to SCFDR */
+ [SCRFDR] = { 0x20, 16 },
+ [SCSPTR] = { 0x24, 16 },
+ [SCLSR] = { 0x28, 16 },
+ [HSSRR] = sci_reg_invalid,
+ },
+
+ /*
+ * SH7705-style SCIF(B) ports, lacking both SCSPTR and SCLSR
+ * registers.
+ */
+ [SCIx_SH7705_SCIF_REGTYPE] = {
+ [SCSMR] = { 0x00, 16 },
+ [SCBRR] = { 0x04, 8 },
+ [SCSCR] = { 0x08, 16 },
+ [SCxTDR] = { 0x20, 8 },
+ [SCxSR] = { 0x14, 16 },
+ [SCxRDR] = { 0x24, 8 },
+ [SCFCR] = { 0x18, 16 },
+ [SCFDR] = { 0x1c, 16 },
+ [SCTFDR] = sci_reg_invalid,
+ [SCRFDR] = sci_reg_invalid,
+ [SCSPTR] = sci_reg_invalid,
+ [SCLSR] = sci_reg_invalid,
+ [HSSRR] = sci_reg_invalid,
+ },
+};
+
+#define sci_getreg(up, offset) (sci_regmap[to_sci_port(up)->cfg->regtype] + offset)
+
+/*
+ * The "offset" here is rather misleading, in that it refers to an enum
+ * value relative to the port mapping rather than the fixed offset
+ * itself, which needs to be manually retrieved from the platform's
+ * register map for the given port.
+ */
+static unsigned int sci_serial_in(struct uart_port *p, int offset)
+{
+ struct plat_sci_reg *reg = sci_getreg(p, offset);
+
+ if (reg->size == 8)
+ return ioread8(p->membase + (reg->offset << p->regshift));
+ else if (reg->size == 16)
+ return ioread16(p->membase + (reg->offset << p->regshift));
+ else
+ WARN(1, "Invalid register access\n");
+
+ return 0;
+}
+
+static void sci_serial_out(struct uart_port *p, int offset, int value)
+{
+ struct plat_sci_reg *reg = sci_getreg(p, offset);
+
+ if (reg->size == 8)
+ iowrite8(value, p->membase + (reg->offset << p->regshift));
+ else if (reg->size == 16)
+ iowrite16(value, p->membase + (reg->offset << p->regshift));
+ else
+ WARN(1, "Invalid register access\n");
+}
+
+static int sci_probe_regmap(struct plat_sci_port *cfg)
+{
+ switch (cfg->type) {
+ case PORT_SCI:
+ cfg->regtype = SCIx_SCI_REGTYPE;
+ break;
+ case PORT_IRDA:
+ cfg->regtype = SCIx_IRDA_REGTYPE;
+ break;
+ case PORT_SCIFA:
+ cfg->regtype = SCIx_SCIFA_REGTYPE;
+ break;
+ case PORT_SCIFB:
+ cfg->regtype = SCIx_SCIFB_REGTYPE;
+ break;
+ case PORT_SCIF:
+ /*
+ * The SH-4 is a bit of a misnomer here, although that's
+ * where this particular port layout originated. This
+ * configuration (or some slight variation thereof)
+ * remains the dominant model for all SCIFs.
+ */
+ cfg->regtype = SCIx_SH4_SCIF_REGTYPE;
+ break;
+ case PORT_HSCIF:
+ cfg->regtype = SCIx_HSCIF_REGTYPE;
+ break;
+ default:
+ pr_err("Can't probe register map for given port\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void sci_port_enable(struct sci_port *sci_port)
+{
+ if (!sci_port->port.dev)
+ return;
+
+ pm_runtime_get_sync(sci_port->port.dev);
+
+ clk_prepare_enable(sci_port->iclk);
+ sci_port->port.uartclk = clk_get_rate(sci_port->iclk);
+ clk_prepare_enable(sci_port->fclk);
+}
+
+static void sci_port_disable(struct sci_port *sci_port)
+{
+ if (!sci_port->port.dev)
+ return;
+
+ /* Cancel the break timer to ensure that the timer handler will not try
+ * to access the hardware with clocks and power disabled. Reset the
+ * break flag to make the break debouncing state machine ready for the
+ * next break.
+ */
+ del_timer_sync(&sci_port->break_timer);
+ sci_port->break_flag = 0;
+
+ clk_disable_unprepare(sci_port->fclk);
+ clk_disable_unprepare(sci_port->iclk);
+
+ pm_runtime_put_sync(sci_port->port.dev);
+}
+
+#if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_SH_SCI_CONSOLE)
+
+#ifdef CONFIG_CONSOLE_POLL
+static int sci_poll_get_char(struct uart_port *port)
+{
+ unsigned short status;
+ int c;
+
+ do {
+ status = serial_port_in(port, SCxSR);
+ if (status & SCxSR_ERRORS(port)) {
+ serial_port_out(port, SCxSR, SCxSR_ERROR_CLEAR(port));
+ continue;
+ }
+ break;
+ } while (1);
+
+ if (!(status & SCxSR_RDxF(port)))
+ return NO_POLL_CHAR;
+
+ c = serial_port_in(port, SCxRDR);
+
+ /* Dummy read */
+ serial_port_in(port, SCxSR);
+ serial_port_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
+
+ return c;
+}
+#endif
+
+static void sci_poll_put_char(struct uart_port *port, unsigned char c)
+{
+ unsigned short status;
+
+ do {
+ status = serial_port_in(port, SCxSR);
+ } while (!(status & SCxSR_TDxE(port)));
+
+ serial_port_out(port, SCxTDR, c);
+ serial_port_out(port, SCxSR, SCxSR_TDxE_CLEAR(port) & ~SCxSR_TEND(port));
+}
+#endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_SH_SCI_CONSOLE */
+
+static void sci_init_pins(struct uart_port *port, unsigned int cflag)
+{
+ struct sci_port *s = to_sci_port(port);
+ struct plat_sci_reg *reg = sci_regmap[s->cfg->regtype] + SCSPTR;
+
+ /*
+ * Use port-specific handler if provided.
+ */
+ if (s->cfg->ops && s->cfg->ops->init_pins) {
+ s->cfg->ops->init_pins(port, cflag);
+ return;
+ }
+
+ /*
+ * For the generic path SCSPTR is necessary. Bail out if that's
+ * unavailable, too.
+ */
+ if (!reg->size)
+ return;
+
+ if ((s->cfg->capabilities & SCIx_HAVE_RTSCTS) &&
+ ((!(cflag & CRTSCTS)))) {
+ unsigned short status;
+
+ status = serial_port_in(port, SCSPTR);
+ status &= ~SCSPTR_CTSIO;
+ status |= SCSPTR_RTSIO;
+ serial_port_out(port, SCSPTR, status); /* Set RTS = 1 */
+ }
+}
+
+static int sci_txfill(struct uart_port *port)
+{
+ struct plat_sci_reg *reg;
+
+ reg = sci_getreg(port, SCTFDR);
+ if (reg->size)
+ return serial_port_in(port, SCTFDR) & ((port->fifosize << 1) - 1);
+
+ reg = sci_getreg(port, SCFDR);
+ if (reg->size)
+ return serial_port_in(port, SCFDR) >> 8;
+
+ return !(serial_port_in(port, SCxSR) & SCI_TDRE);
+}
+
+static int sci_txroom(struct uart_port *port)
+{
+ return port->fifosize - sci_txfill(port);
+}
+
+static int sci_rxfill(struct uart_port *port)
+{
+ struct plat_sci_reg *reg;
+
+ reg = sci_getreg(port, SCRFDR);
+ if (reg->size)
+ return serial_port_in(port, SCRFDR) & ((port->fifosize << 1) - 1);
+
+ reg = sci_getreg(port, SCFDR);
+ if (reg->size)
+ return serial_port_in(port, SCFDR) & ((port->fifosize << 1) - 1);
+
+ return (serial_port_in(port, SCxSR) & SCxSR_RDxF(port)) != 0;
+}
+
+/*
+ * SCI helper for checking the state of the muxed port/RXD pins.
+ */
+static inline int sci_rxd_in(struct uart_port *port)
+{
+ struct sci_port *s = to_sci_port(port);
+
+ if (s->cfg->port_reg <= 0)
+ return 1;
+
+ /* Cast for ARM damage */
+ return !!__raw_readb((void __iomem *)(uintptr_t)s->cfg->port_reg);
+}
+
+/* ********************************************************************** *
+ * the interrupt related routines *
+ * ********************************************************************** */
+
+static void sci_transmit_chars(struct uart_port *port)
+{
+ struct circ_buf *xmit = &port->state->xmit;
+ unsigned int stopped = uart_tx_stopped(port);
+ unsigned short status;
+ unsigned short ctrl;
+ int count;
+
+ status = serial_port_in(port, SCxSR);
+ if (!(status & SCxSR_TDxE(port))) {
+ ctrl = serial_port_in(port, SCSCR);
+ if (uart_circ_empty(xmit))
+ ctrl &= ~SCSCR_TIE;
+ else
+ ctrl |= SCSCR_TIE;
+ serial_port_out(port, SCSCR, ctrl);
+ return;
+ }
+
+ count = sci_txroom(port);
+
+ do {
+ unsigned char c;
+
+ if (port->x_char) {
+ c = port->x_char;
+ port->x_char = 0;
+ } else if (!uart_circ_empty(xmit) && !stopped) {
+ c = xmit->buf[xmit->tail];
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ } else {
+ break;
+ }
+
+ serial_port_out(port, SCxTDR, c);
+
+ port->icount.tx++;
+ } while (--count > 0);
+
+ serial_port_out(port, SCxSR, SCxSR_TDxE_CLEAR(port));
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+ if (uart_circ_empty(xmit)) {
+ sci_stop_tx(port);
+ } else {
+ ctrl = serial_port_in(port, SCSCR);
+
+ if (port->type != PORT_SCI) {
+ serial_port_in(port, SCxSR); /* Dummy read */
+ serial_port_out(port, SCxSR, SCxSR_TDxE_CLEAR(port));
+ }
+
+ ctrl |= SCSCR_TIE;
+ serial_port_out(port, SCSCR, ctrl);
+ }
+}
+
+/* On SH3, SCIF may read end-of-break as a space->mark char */
+#define STEPFN(c) ({int __c = (c); (((__c-1)|(__c)) == -1); })
+
+static void sci_receive_chars(struct uart_port *port)
+{
+ struct sci_port *sci_port = to_sci_port(port);
+ struct tty_port *tport = &port->state->port;
+ int i, count, copied = 0;
+ unsigned short status;
+ unsigned char flag;
+
+ status = serial_port_in(port, SCxSR);
+ if (!(status & SCxSR_RDxF(port)))
+ return;
+
+ while (1) {
+ /* Don't copy more bytes than there is room for in the buffer */
+ count = tty_buffer_request_room(tport, sci_rxfill(port));
+
+ /* If for any reason we can't copy more data, we're done! */
+ if (count == 0)
+ break;
+
+ if (port->type == PORT_SCI) {
+ char c = serial_port_in(port, SCxRDR);
+ if (uart_handle_sysrq_char(port, c) ||
+ sci_port->break_flag)
+ count = 0;
+ else
+ tty_insert_flip_char(tport, c, TTY_NORMAL);
+ } else {
+ for (i = 0; i < count; i++) {
+ char c = serial_port_in(port, SCxRDR);
+
+ status = serial_port_in(port, SCxSR);
+#if defined(CONFIG_CPU_SH3)
+ /* Skip "chars" during break */
+ if (sci_port->break_flag) {
+ if ((c == 0) &&
+ (status & SCxSR_FER(port))) {
+ count--; i--;
+ continue;
+ }
+
+ /* Nonzero => end-of-break */
+ dev_dbg(port->dev, "debounce<%02x>\n", c);
+ sci_port->break_flag = 0;
+
+ if (STEPFN(c)) {
+ count--; i--;
+ continue;
+ }
+ }
+#endif /* CONFIG_CPU_SH3 */
+ if (uart_handle_sysrq_char(port, c)) {
+ count--; i--;
+ continue;
+ }
+
+ /* Store data and status */
+ if (status & SCxSR_FER(port)) {
+ flag = TTY_FRAME;
+ port->icount.frame++;
+ dev_notice(port->dev, "frame error\n");
+ } else if (status & SCxSR_PER(port)) {
+ flag = TTY_PARITY;
+ port->icount.parity++;
+ dev_notice(port->dev, "parity error\n");
+ } else
+ flag = TTY_NORMAL;
+
+ tty_insert_flip_char(tport, c, flag);
+ }
+ }
+
+ serial_port_in(port, SCxSR); /* dummy read */
+ serial_port_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
+
+ copied += count;
+ port->icount.rx += count;
+ }
+
+ if (copied) {
+ /* Tell the rest of the system the news. New characters! */
+ tty_flip_buffer_push(tport);
+ } else {
+ serial_port_in(port, SCxSR); /* dummy read */
+ serial_port_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
+ }
+}
+
+#define SCI_BREAK_JIFFIES (HZ/20)
+
+/*
+ * The sci generates interrupts during the break,
+ * 1 per millisecond or so during the break period, for 9600 baud.
+ * So dont bother disabling interrupts.
+ * But dont want more than 1 break event.
+ * Use a kernel timer to periodically poll the rx line until
+ * the break is finished.
+ */
+static inline void sci_schedule_break_timer(struct sci_port *port)
+{
+ mod_timer(&port->break_timer, jiffies + SCI_BREAK_JIFFIES);
+}
+
+/* Ensure that two consecutive samples find the break over. */
+static void sci_break_timer(unsigned long data)
+{
+ struct sci_port *port = (struct sci_port *)data;
+
+ if (sci_rxd_in(&port->port) == 0) {
+ port->break_flag = 1;
+ sci_schedule_break_timer(port);
+ } else if (port->break_flag == 1) {
+ /* break is over. */
+ port->break_flag = 2;
+ sci_schedule_break_timer(port);
+ } else
+ port->break_flag = 0;
+}
+
+static int sci_handle_errors(struct uart_port *port)
+{
+ int copied = 0;
+ unsigned short status = serial_port_in(port, SCxSR);
+ struct tty_port *tport = &port->state->port;
+ struct sci_port *s = to_sci_port(port);
+
+ /* Handle overruns */
+ if (status & (1 << s->overrun_bit)) {
+ port->icount.overrun++;
+
+ /* overrun error */
+ if (tty_insert_flip_char(tport, 0, TTY_OVERRUN))
+ copied++;
+
+ dev_notice(port->dev, "overrun error\n");
+ }
+
+ if (status & SCxSR_FER(port)) {
+ if (sci_rxd_in(port) == 0) {
+ /* Notify of BREAK */
+ struct sci_port *sci_port = to_sci_port(port);
+
+ if (!sci_port->break_flag) {
+ port->icount.brk++;
+
+ sci_port->break_flag = 1;
+ sci_schedule_break_timer(sci_port);
+
+ /* Do sysrq handling. */
+ if (uart_handle_break(port))
+ return 0;
+
+ dev_dbg(port->dev, "BREAK detected\n");
+
+ if (tty_insert_flip_char(tport, 0, TTY_BREAK))
+ copied++;
+ }
+
+ } else {
+ /* frame error */
+ port->icount.frame++;
+
+ if (tty_insert_flip_char(tport, 0, TTY_FRAME))
+ copied++;
+
+ dev_notice(port->dev, "frame error\n");
+ }
+ }
+
+ if (status & SCxSR_PER(port)) {
+ /* parity error */
+ port->icount.parity++;
+
+ if (tty_insert_flip_char(tport, 0, TTY_PARITY))
+ copied++;
+
+ dev_notice(port->dev, "parity error\n");
+ }
+
+ if (copied)
+ tty_flip_buffer_push(tport);
+
+ return copied;
+}
+
+static int sci_handle_fifo_overrun(struct uart_port *port)
+{
+ struct tty_port *tport = &port->state->port;
+ struct sci_port *s = to_sci_port(port);
+ struct plat_sci_reg *reg;
+ int copied = 0, offset;
+ u16 status, bit;
+
+ switch (port->type) {
+ case PORT_SCIF:
+ case PORT_HSCIF:
+ offset = SCLSR;
+ break;
+ case PORT_SCIFA:
+ case PORT_SCIFB:
+ offset = SCxSR;
+ break;
+ default:
+ return 0;
+ }
+
+ reg = sci_getreg(port, offset);
+ if (!reg->size)
+ return 0;
+
+ status = serial_port_in(port, offset);
+ bit = 1 << s->overrun_bit;
+
+ if (status & bit) {
+ status &= ~bit;
+ serial_port_out(port, offset, status);
+
+ port->icount.overrun++;
+
+ tty_insert_flip_char(tport, 0, TTY_OVERRUN);
+ tty_flip_buffer_push(tport);
+
+ dev_dbg(port->dev, "overrun error\n");
+ copied++;
+ }
+
+ return copied;
+}
+
+static int sci_handle_breaks(struct uart_port *port)
+{
+ int copied = 0;
+ unsigned short status = serial_port_in(port, SCxSR);
+ struct tty_port *tport = &port->state->port;
+ struct sci_port *s = to_sci_port(port);
+
+ if (uart_handle_break(port))
+ return 0;
+
+ if (!s->break_flag && status & SCxSR_BRK(port)) {
+#if defined(CONFIG_CPU_SH3)
+ /* Debounce break */
+ s->break_flag = 1;
+#endif
+
+ port->icount.brk++;
+
+ /* Notify of BREAK */
+ if (tty_insert_flip_char(tport, 0, TTY_BREAK))
+ copied++;
+
+ dev_dbg(port->dev, "BREAK detected\n");
+ }
+
+ if (copied)
+ tty_flip_buffer_push(tport);
+
+ copied += sci_handle_fifo_overrun(port);
+
+ return copied;
+}
+
+static irqreturn_t sci_rx_interrupt(int irq, void *ptr)
+{
+#ifdef CONFIG_SERIAL_SH_SCI_DMA
+ struct uart_port *port = ptr;
+ struct sci_port *s = to_sci_port(port);
+
+ if (s->chan_rx) {
+ u16 scr = serial_port_in(port, SCSCR);
+ u16 ssr = serial_port_in(port, SCxSR);
+
+ /* Disable future Rx interrupts */
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
+ disable_irq_nosync(irq);
+ scr |= SCSCR_RDRQE;
+ } else {
+ scr &= ~SCSCR_RIE;
+ }
+ serial_port_out(port, SCSCR, scr);
+ /* Clear current interrupt */
+ serial_port_out(port, SCxSR, ssr & ~(1 | SCxSR_RDxF(port)));
+ dev_dbg(port->dev, "Rx IRQ %lu: setup t-out in %u jiffies\n",
+ jiffies, s->rx_timeout);
+ mod_timer(&s->rx_timer, jiffies + s->rx_timeout);
+
+ return IRQ_HANDLED;
+ }
+#endif
+
+ /* I think sci_receive_chars has to be called irrespective
+ * of whether the I_IXOFF is set, otherwise, how is the interrupt
+ * to be disabled?
+ */
+ sci_receive_chars(ptr);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t sci_tx_interrupt(int irq, void *ptr)
+{
+ struct uart_port *port = ptr;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+ sci_transmit_chars(port);
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t sci_er_interrupt(int irq, void *ptr)
+{
+ struct uart_port *port = ptr;
+
+ /* Handle errors */
+ if (port->type == PORT_SCI) {
+ if (sci_handle_errors(port)) {
+ /* discard character in rx buffer */
+ serial_port_in(port, SCxSR);
+ serial_port_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
+ }
+ } else {
+ sci_handle_fifo_overrun(port);
+ sci_rx_interrupt(irq, ptr);
+ }
+
+ serial_port_out(port, SCxSR, SCxSR_ERROR_CLEAR(port));
+
+ /* Kick the transmission */
+ sci_tx_interrupt(irq, ptr);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t sci_br_interrupt(int irq, void *ptr)
+{
+ struct uart_port *port = ptr;
+
+ /* Handle BREAKs */
+ sci_handle_breaks(port);
+ serial_port_out(port, SCxSR, SCxSR_BREAK_CLEAR(port));
+
+ return IRQ_HANDLED;
+}
+
+static inline unsigned long port_rx_irq_mask(struct uart_port *port)
+{
+ /*
+ * Not all ports (such as SCIFA) will support REIE. Rather than
+ * special-casing the port type, we check the port initialization
+ * IRQ enable mask to see whether the IRQ is desired at all. If
+ * it's unset, it's logically inferred that there's no point in
+ * testing for it.
+ */
+ return SCSCR_RIE | (to_sci_port(port)->cfg->scscr & SCSCR_REIE);
+}
+
+static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
+{
+ unsigned short ssr_status, scr_status, err_enabled, orer_status = 0;
+ struct uart_port *port = ptr;
+ struct sci_port *s = to_sci_port(port);
+ irqreturn_t ret = IRQ_NONE;
+
+ ssr_status = serial_port_in(port, SCxSR);
+ scr_status = serial_port_in(port, SCSCR);
+ switch (port->type) {
+ case PORT_SCIF:
+ case PORT_HSCIF:
+ orer_status = serial_port_in(port, SCLSR);
+ break;
+ case PORT_SCIFA:
+ case PORT_SCIFB:
+ orer_status = ssr_status;
+ break;
+ }
+
+ err_enabled = scr_status & port_rx_irq_mask(port);
+
+ /* Tx Interrupt */
+ if ((ssr_status & SCxSR_TDxE(port)) && (scr_status & SCSCR_TIE) &&
+ !s->chan_tx)
+ ret = sci_tx_interrupt(irq, ptr);
+
+ /*
+ * Rx Interrupt: if we're using DMA, the DMA controller clears RDF /
+ * DR flags
+ */
+ if (((ssr_status & SCxSR_RDxF(port)) || s->chan_rx) &&
+ (scr_status & SCSCR_RIE)) {
+ if (port->type == PORT_SCIF || port->type == PORT_HSCIF)
+ sci_handle_fifo_overrun(port);
+ ret = sci_rx_interrupt(irq, ptr);
+ }
+
+ /* Error Interrupt */
+ if ((ssr_status & SCxSR_ERRORS(port)) && err_enabled)
+ ret = sci_er_interrupt(irq, ptr);
+
+ /* Break Interrupt */
+ if ((ssr_status & SCxSR_BRK(port)) && err_enabled)
+ ret = sci_br_interrupt(irq, ptr);
+
+ /* Overrun Interrupt */
+ if (orer_status & (1 << s->overrun_bit))
+ sci_handle_fifo_overrun(port);
+
+ return ret;
+}
+
+/*
+ * Here we define a transition notifier so that we can update all of our
+ * ports' baud rate when the peripheral clock changes.
+ */
+static int sci_notifier(struct notifier_block *self,
+ unsigned long phase, void *p)
+{
+ struct sci_port *sci_port;
+ unsigned long flags;
+
+ sci_port = container_of(self, struct sci_port, freq_transition);
+
+ if (phase == CPUFREQ_POSTCHANGE) {
+ struct uart_port *port = &sci_port->port;
+
+ spin_lock_irqsave(&port->lock, flags);
+ port->uartclk = clk_get_rate(sci_port->iclk);
+ spin_unlock_irqrestore(&port->lock, flags);
+ }
+
+ return NOTIFY_OK;
+}
+
+static struct sci_irq_desc {
+ const char *desc;
+ irq_handler_t handler;
+} sci_irq_desc[] = {
+ /*
+ * Split out handlers, the default case.
+ */
+ [SCIx_ERI_IRQ] = {
+ .desc = "rx err",
+ .handler = sci_er_interrupt,
+ },
+
+ [SCIx_RXI_IRQ] = {
+ .desc = "rx full",
+ .handler = sci_rx_interrupt,
+ },
+
+ [SCIx_TXI_IRQ] = {
+ .desc = "tx empty",
+ .handler = sci_tx_interrupt,
+ },
+
+ [SCIx_BRI_IRQ] = {
+ .desc = "break",
+ .handler = sci_br_interrupt,
+ },
+
+ /*
+ * Special muxed handler.
+ */
+ [SCIx_MUX_IRQ] = {
+ .desc = "mux",
+ .handler = sci_mpxed_interrupt,
+ },
+};
+
+static int sci_request_irq(struct sci_port *port)
+{
+ struct uart_port *up = &port->port;
+ int i, j, ret = 0;
+
+ for (i = j = 0; i < SCIx_NR_IRQS; i++, j++) {
+ struct sci_irq_desc *desc;
+ int irq;
+
+ if (SCIx_IRQ_IS_MUXED(port)) {
+ i = SCIx_MUX_IRQ;
+ irq = up->irq;
+ } else {
+ irq = port->irqs[i];
+
+ /*
+ * Certain port types won't support all of the
+ * available interrupt sources.
+ */
+ if (unlikely(irq < 0))
+ continue;
+ }
+
+ desc = sci_irq_desc + i;
+ port->irqstr[j] = kasprintf(GFP_KERNEL, "%s:%s",
+ dev_name(up->dev), desc->desc);
+ if (!port->irqstr[j]) {
+ dev_err(up->dev, "Failed to allocate %s IRQ string\n",
+ desc->desc);
+ goto out_nomem;
+ }
+
+ ret = request_irq(irq, desc->handler, up->irqflags,
+ port->irqstr[j], port);
+ if (unlikely(ret)) {
+ dev_err(up->dev, "Can't allocate %s IRQ\n", desc->desc);
+ goto out_noirq;
+ }
+ }
+
+ return 0;
+
+out_noirq:
+ while (--i >= 0)
+ free_irq(port->irqs[i], port);
+
+out_nomem:
+ while (--j >= 0)
+ kfree(port->irqstr[j]);
+
+ return ret;
+}
+
+static void sci_free_irq(struct sci_port *port)
+{
+ int i;
+
+ /*
+ * Intentionally in reverse order so we iterate over the muxed
+ * IRQ first.
+ */
+ for (i = 0; i < SCIx_NR_IRQS; i++) {
+ int irq = port->irqs[i];
+
+ /*
+ * Certain port types won't support all of the available
+ * interrupt sources.
+ */
+ if (unlikely(irq < 0))
+ continue;
+
+ free_irq(port->irqs[i], port);
+ kfree(port->irqstr[i]);
+
+ if (SCIx_IRQ_IS_MUXED(port)) {
+ /* If there's only one IRQ, we're done. */
+ return;
+ }
+ }
+}
+
+static unsigned int sci_tx_empty(struct uart_port *port)
+{
+ unsigned short status = serial_port_in(port, SCxSR);
+ unsigned short in_tx_fifo = sci_txfill(port);
+
+ return (status & SCxSR_TEND(port)) && !in_tx_fifo ? TIOCSER_TEMT : 0;
+}
+
+/*
+ * Modem control is a bit of a mixed bag for SCI(F) ports. Generally
+ * CTS/RTS is supported in hardware by at least one port and controlled
+ * via SCSPTR (SCxPCR for SCIFA/B parts), or external pins (presently
+ * handled via the ->init_pins() op, which is a bit of a one-way street,
+ * lacking any ability to defer pin control -- this will later be
+ * converted over to the GPIO framework).
+ *
+ * Other modes (such as loopback) are supported generically on certain
+ * port types, but not others. For these it's sufficient to test for the
+ * existence of the support register and simply ignore the port type.
+ */
+static void sci_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ if (mctrl & TIOCM_LOOP) {
+ struct plat_sci_reg *reg;
+
+ /*
+ * Standard loopback mode for SCFCR ports.
+ */
+ reg = sci_getreg(port, SCFCR);
+ if (reg->size)
+ serial_port_out(port, SCFCR,
+ serial_port_in(port, SCFCR) |
+ SCFCR_LOOP);
+ }
+}
+
+static unsigned int sci_get_mctrl(struct uart_port *port)
+{
+ /*
+ * CTS/RTS is handled in hardware when supported, while nothing
+ * else is wired up. Keep it simple and simply assert DSR/CAR.
+ */
+ return TIOCM_DSR | TIOCM_CAR;
+}
+
+#ifdef CONFIG_SERIAL_SH_SCI_DMA
+static void sci_dma_tx_complete(void *arg)
+{
+ struct sci_port *s = arg;
+ struct uart_port *port = &s->port;
+ struct circ_buf *xmit = &port->state->xmit;
+ unsigned long flags;
+
+ dev_dbg(port->dev, "%s(%d)\n", __func__, port->line);
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ xmit->tail += sg_dma_len(&s->sg_tx);
+ xmit->tail &= UART_XMIT_SIZE - 1;
+
+ port->icount.tx += sg_dma_len(&s->sg_tx);
+
+ async_tx_ack(s->desc_tx);
+ s->desc_tx = NULL;
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+ if (!uart_circ_empty(xmit)) {
+ s->cookie_tx = 0;
+ schedule_work(&s->work_tx);
+ } else {
+ s->cookie_tx = -EINVAL;
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
+ u16 ctrl = serial_port_in(port, SCSCR);
+ serial_port_out(port, SCSCR, ctrl & ~SCSCR_TIE);
+ }
+ }
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+/* Locking: called with port lock held */
+static int sci_dma_rx_push(struct sci_port *s, size_t count)
+{
+ struct uart_port *port = &s->port;
+ struct tty_port *tport = &port->state->port;
+ int i, active, room;
+
+ room = tty_buffer_request_room(tport, count);
+
+ if (s->active_rx == s->cookie_rx[0]) {
+ active = 0;
+ } else if (s->active_rx == s->cookie_rx[1]) {
+ active = 1;
+ } else {
+ dev_err(port->dev, "cookie %d not found!\n", s->active_rx);
+ return 0;
+ }
+
+ if (room < count)
+ dev_warn(port->dev, "Rx overrun: dropping %zu bytes\n",
+ count - room);
+ if (!room)
+ return room;
+
+ for (i = 0; i < room; i++)
+ tty_insert_flip_char(tport, ((u8 *)sg_virt(&s->sg_rx[active]))[i],
+ TTY_NORMAL);
+
+ port->icount.rx += room;
+
+ return room;
+}
+
+static void sci_dma_rx_complete(void *arg)
+{
+ struct sci_port *s = arg;
+ struct uart_port *port = &s->port;
+ unsigned long flags;
+ int count;
+
+ dev_dbg(port->dev, "%s(%d) active #%d\n",
+ __func__, port->line, s->active_rx);
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ count = sci_dma_rx_push(s, s->buf_len_rx);
+
+ mod_timer(&s->rx_timer, jiffies + s->rx_timeout);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ if (count)
+ tty_flip_buffer_push(&port->state->port);
+
+ schedule_work(&s->work_rx);
+}
+
+static void sci_rx_dma_release(struct sci_port *s, bool enable_pio)
+{
+ struct dma_chan *chan = s->chan_rx;
+ struct uart_port *port = &s->port;
+
+ s->chan_rx = NULL;
+ s->cookie_rx[0] = s->cookie_rx[1] = -EINVAL;
+ dma_release_channel(chan);
+ if (sg_dma_address(&s->sg_rx[0]))
+ dma_free_coherent(port->dev, s->buf_len_rx * 2,
+ sg_virt(&s->sg_rx[0]), sg_dma_address(&s->sg_rx[0]));
+ if (enable_pio)
+ sci_start_rx(port);
+}
+
+static void sci_tx_dma_release(struct sci_port *s, bool enable_pio)
+{
+ struct dma_chan *chan = s->chan_tx;
+ struct uart_port *port = &s->port;
+
+ s->chan_tx = NULL;
+ s->cookie_tx = -EINVAL;
+ dma_release_channel(chan);
+ if (enable_pio)
+ sci_start_tx(port);
+}
+
+static void sci_submit_rx(struct sci_port *s)
+{
+ struct dma_chan *chan = s->chan_rx;
+ int i;
+
+ for (i = 0; i < 2; i++) {
+ struct scatterlist *sg = &s->sg_rx[i];
+ struct dma_async_tx_descriptor *desc;
+
+ desc = dmaengine_prep_slave_sg(chan,
+ sg, 1, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT);
+
+ if (desc) {
+ s->desc_rx[i] = desc;
+ desc->callback = sci_dma_rx_complete;
+ desc->callback_param = s;
+ s->cookie_rx[i] = desc->tx_submit(desc);
+ }
+
+ if (!desc || s->cookie_rx[i] < 0) {
+ if (i) {
+ async_tx_ack(s->desc_rx[0]);
+ s->cookie_rx[0] = -EINVAL;
+ }
+ if (desc) {
+ async_tx_ack(desc);
+ s->cookie_rx[i] = -EINVAL;
+ }
+ dev_warn(s->port.dev,
+ "failed to re-start DMA, using PIO\n");
+ sci_rx_dma_release(s, true);
+ return;
+ }
+ dev_dbg(s->port.dev, "%s(): cookie %d to #%d\n",
+ __func__, s->cookie_rx[i], i);
+ }
+
+ s->active_rx = s->cookie_rx[0];
+
+ dma_async_issue_pending(chan);
+}
+
+static void work_fn_rx(struct work_struct *work)
+{
+ struct sci_port *s = container_of(work, struct sci_port, work_rx);
+ struct uart_port *port = &s->port;
+ struct dma_async_tx_descriptor *desc;
+ int new;
+
+ if (s->active_rx == s->cookie_rx[0]) {
+ new = 0;
+ } else if (s->active_rx == s->cookie_rx[1]) {
+ new = 1;
+ } else {
+ dev_err(port->dev, "cookie %d not found!\n", s->active_rx);
+ return;
+ }
+ desc = s->desc_rx[new];
+
+ if (dma_async_is_tx_complete(s->chan_rx, s->active_rx, NULL, NULL) !=
+ DMA_COMPLETE) {
+ /* Handle incomplete DMA receive */
+ struct dma_chan *chan = s->chan_rx;
+ struct shdma_desc *sh_desc = container_of(desc,
+ struct shdma_desc, async_tx);
+ unsigned long flags;
+ int count;
+
+ dmaengine_terminate_all(chan);
+ dev_dbg(port->dev, "Read %zu bytes with cookie %d\n",
+ sh_desc->partial, sh_desc->cookie);
+
+ spin_lock_irqsave(&port->lock, flags);
+ count = sci_dma_rx_push(s, sh_desc->partial);
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ if (count)
+ tty_flip_buffer_push(&port->state->port);
+
+ sci_submit_rx(s);
+
+ return;
+ }
+
+ s->cookie_rx[new] = desc->tx_submit(desc);
+ if (s->cookie_rx[new] < 0) {
+ dev_warn(port->dev, "Failed submitting Rx DMA descriptor\n");
+ sci_rx_dma_release(s, true);
+ return;
+ }
+
+ s->active_rx = s->cookie_rx[!new];
+
+ dev_dbg(port->dev, "%s: cookie %d #%d, new active #%d\n",
+ __func__, s->cookie_rx[new], new, s->active_rx);
+}
+
+static void work_fn_tx(struct work_struct *work)
+{
+ struct sci_port *s = container_of(work, struct sci_port, work_tx);
+ struct dma_async_tx_descriptor *desc;
+ struct dma_chan *chan = s->chan_tx;
+ struct uart_port *port = &s->port;
+ struct circ_buf *xmit = &port->state->xmit;
+ struct scatterlist *sg = &s->sg_tx;
+
+ /*
+ * DMA is idle now.
+ * Port xmit buffer is already mapped, and it is one page... Just adjust
+ * offsets and lengths. Since it is a circular buffer, we have to
+ * transmit till the end, and then the rest. Take the port lock to get a
+ * consistent xmit buffer state.
+ */
+ spin_lock_irq(&port->lock);
+ sg->offset = xmit->tail & (UART_XMIT_SIZE - 1);
+ sg_dma_address(sg) = (sg_dma_address(sg) & ~(UART_XMIT_SIZE - 1)) +
+ sg->offset;
+ sg_dma_len(sg) = min((int)CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE),
+ CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE));
+ spin_unlock_irq(&port->lock);
+
+ BUG_ON(!sg_dma_len(sg));
+
+ desc = dmaengine_prep_slave_sg(chan,
+ sg, s->sg_len_tx, DMA_MEM_TO_DEV,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!desc) {
+ /* switch to PIO */
+ sci_tx_dma_release(s, true);
+ return;
+ }
+
+ dma_sync_sg_for_device(port->dev, sg, 1, DMA_TO_DEVICE);
+
+ spin_lock_irq(&port->lock);
+ s->desc_tx = desc;
+ desc->callback = sci_dma_tx_complete;
+ desc->callback_param = s;
+ spin_unlock_irq(&port->lock);
+ s->cookie_tx = desc->tx_submit(desc);
+ if (s->cookie_tx < 0) {
+ dev_warn(port->dev, "Failed submitting Tx DMA descriptor\n");
+ /* switch to PIO */
+ sci_tx_dma_release(s, true);
+ return;
+ }
+
+ dev_dbg(port->dev, "%s: %p: %d...%d, cookie %d\n",
+ __func__, xmit->buf, xmit->tail, xmit->head, s->cookie_tx);
+
+ dma_async_issue_pending(chan);
+}
+#endif
+
+static void sci_start_tx(struct uart_port *port)
+{
+ struct sci_port *s = to_sci_port(port);
+ unsigned short ctrl;
+
+#ifdef CONFIG_SERIAL_SH_SCI_DMA
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
+ u16 new, scr = serial_port_in(port, SCSCR);
+ if (s->chan_tx)
+ new = scr | SCSCR_TDRQE;
+ else
+ new = scr & ~SCSCR_TDRQE;
+ if (new != scr)
+ serial_port_out(port, SCSCR, new);
+ }
+
+ if (s->chan_tx && !uart_circ_empty(&s->port.state->xmit) &&
+ s->cookie_tx < 0) {
+ s->cookie_tx = 0;
+ schedule_work(&s->work_tx);
+ }
+#endif
+
+ if (!s->chan_tx || port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
+ /* Set TIE (Transmit Interrupt Enable) bit in SCSCR */
+ ctrl = serial_port_in(port, SCSCR);
+ serial_port_out(port, SCSCR, ctrl | SCSCR_TIE);
+ }
+}
+
+static void sci_stop_tx(struct uart_port *port)
+{
+ unsigned short ctrl;
+
+ /* Clear TIE (Transmit Interrupt Enable) bit in SCSCR */
+ ctrl = serial_port_in(port, SCSCR);
+
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
+ ctrl &= ~SCSCR_TDRQE;
+
+ ctrl &= ~SCSCR_TIE;
+
+ serial_port_out(port, SCSCR, ctrl);
+}
+
+static void sci_start_rx(struct uart_port *port)
+{
+ unsigned short ctrl;
+
+ ctrl = serial_port_in(port, SCSCR) | port_rx_irq_mask(port);
+
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
+ ctrl &= ~SCSCR_RDRQE;
+
+ serial_port_out(port, SCSCR, ctrl);
+}
+
+static void sci_stop_rx(struct uart_port *port)
+{
+ unsigned short ctrl;
+
+ ctrl = serial_port_in(port, SCSCR);
+
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
+ ctrl &= ~SCSCR_RDRQE;
+
+ ctrl &= ~port_rx_irq_mask(port);
+
+ serial_port_out(port, SCSCR, ctrl);
+}
+
+static void sci_break_ctl(struct uart_port *port, int break_state)
+{
+ struct sci_port *s = to_sci_port(port);
+ struct plat_sci_reg *reg = sci_regmap[s->cfg->regtype] + SCSPTR;
+ unsigned short scscr, scsptr;
+
+ /* check wheter the port has SCSPTR */
+ if (!reg->size) {
+ /*
+ * Not supported by hardware. Most parts couple break and rx
+ * interrupts together, with break detection always enabled.
+ */
+ return;
+ }
+
+ scsptr = serial_port_in(port, SCSPTR);
+ scscr = serial_port_in(port, SCSCR);
+
+ if (break_state == -1) {
+ scsptr = (scsptr | SCSPTR_SPB2IO) & ~SCSPTR_SPB2DT;
+ scscr &= ~SCSCR_TE;
+ } else {
+ scsptr = (scsptr | SCSPTR_SPB2DT) & ~SCSPTR_SPB2IO;
+ scscr |= SCSCR_TE;
+ }
+
+ serial_port_out(port, SCSPTR, scsptr);
+ serial_port_out(port, SCSCR, scscr);
+}
+
+#ifdef CONFIG_SERIAL_SH_SCI_DMA
+static bool filter(struct dma_chan *chan, void *slave)
+{
+ struct sh_dmae_slave *param = slave;
+
+ dev_dbg(chan->device->dev, "%s: slave ID %d\n",
+ __func__, param->shdma_slave.slave_id);
+
+ chan->private = &param->shdma_slave;
+ return true;
+}
+
+static void rx_timer_fn(unsigned long arg)
+{
+ struct sci_port *s = (struct sci_port *)arg;
+ struct uart_port *port = &s->port;
+ u16 scr = serial_port_in(port, SCSCR);
+
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
+ scr &= ~SCSCR_RDRQE;
+ enable_irq(s->irqs[SCIx_RXI_IRQ]);
+ }
+ serial_port_out(port, SCSCR, scr | SCSCR_RIE);
+ dev_dbg(port->dev, "DMA Rx timed out\n");
+ schedule_work(&s->work_rx);
+}
+
+static void sci_request_dma(struct uart_port *port)
+{
+ struct sci_port *s = to_sci_port(port);
+ struct sh_dmae_slave *param;
+ struct dma_chan *chan;
+ dma_cap_mask_t mask;
+ int nent;
+
+ dev_dbg(port->dev, "%s: port %d\n", __func__, port->line);
+
+ if (s->cfg->dma_slave_tx <= 0 || s->cfg->dma_slave_rx <= 0)
+ return;
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+
+ param = &s->param_tx;
+
+ /* Slave ID, e.g., SHDMA_SLAVE_SCIF0_TX */
+ param->shdma_slave.slave_id = s->cfg->dma_slave_tx;
+
+ s->cookie_tx = -EINVAL;
+ chan = dma_request_channel(mask, filter, param);
+ dev_dbg(port->dev, "%s: TX: got channel %p\n", __func__, chan);
+ if (chan) {
+ s->chan_tx = chan;
+ sg_init_table(&s->sg_tx, 1);
+ /* UART circular tx buffer is an aligned page. */
+ BUG_ON((uintptr_t)port->state->xmit.buf & ~PAGE_MASK);
+ sg_set_page(&s->sg_tx, virt_to_page(port->state->xmit.buf),
+ UART_XMIT_SIZE,
+ (uintptr_t)port->state->xmit.buf & ~PAGE_MASK);
+ nent = dma_map_sg(port->dev, &s->sg_tx, 1, DMA_TO_DEVICE);
+ if (!nent)
+ sci_tx_dma_release(s, false);
+ else
+ dev_dbg(port->dev, "%s: mapped %d@%p to %pad\n",
+ __func__,
+ sg_dma_len(&s->sg_tx), port->state->xmit.buf,
+ &sg_dma_address(&s->sg_tx));
+
+ s->sg_len_tx = nent;
+
+ INIT_WORK(&s->work_tx, work_fn_tx);
+ }
+
+ param = &s->param_rx;
+
+ /* Slave ID, e.g., SHDMA_SLAVE_SCIF0_RX */
+ param->shdma_slave.slave_id = s->cfg->dma_slave_rx;
+
+ chan = dma_request_channel(mask, filter, param);
+ dev_dbg(port->dev, "%s: RX: got channel %p\n", __func__, chan);
+ if (chan) {
+ dma_addr_t dma[2];
+ void *buf[2];
+ int i;
+
+ s->chan_rx = chan;
+
+ s->buf_len_rx = 2 * max(16, (int)port->fifosize);
+ buf[0] = dma_alloc_coherent(port->dev, s->buf_len_rx * 2,
+ &dma[0], GFP_KERNEL);
+
+ if (!buf[0]) {
+ dev_warn(port->dev,
+ "failed to allocate dma buffer, using PIO\n");
+ sci_rx_dma_release(s, true);
+ return;
+ }
+
+ buf[1] = buf[0] + s->buf_len_rx;
+ dma[1] = dma[0] + s->buf_len_rx;
+
+ for (i = 0; i < 2; i++) {
+ struct scatterlist *sg = &s->sg_rx[i];
+
+ sg_init_table(sg, 1);
+ sg_set_page(sg, virt_to_page(buf[i]), s->buf_len_rx,
+ (uintptr_t)buf[i] & ~PAGE_MASK);
+ sg_dma_address(sg) = dma[i];
+ }
+
+ INIT_WORK(&s->work_rx, work_fn_rx);
+ setup_timer(&s->rx_timer, rx_timer_fn, (unsigned long)s);
+
+ sci_submit_rx(s);
+ }
+}
+
+static void sci_free_dma(struct uart_port *port)
+{
+ struct sci_port *s = to_sci_port(port);
+
+ if (s->chan_tx)
+ sci_tx_dma_release(s, false);
+ if (s->chan_rx)
+ sci_rx_dma_release(s, false);
+}
+#else
+static inline void sci_request_dma(struct uart_port *port)
+{
+}
+
+static inline void sci_free_dma(struct uart_port *port)
+{
+}
+#endif
+
+static int sci_startup(struct uart_port *port)
+{
+ struct sci_port *s = to_sci_port(port);
+ unsigned long flags;
+ int ret;
+
+ dev_dbg(port->dev, "%s(%d)\n", __func__, port->line);
+
+ ret = sci_request_irq(s);
+ if (unlikely(ret < 0))
+ return ret;
+
+ sci_request_dma(port);
+
+ spin_lock_irqsave(&port->lock, flags);
+ sci_start_tx(port);
+ sci_start_rx(port);
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ return 0;
+}
+
+static void sci_shutdown(struct uart_port *port)
+{
+ struct sci_port *s = to_sci_port(port);
+ unsigned long flags;
+
+ dev_dbg(port->dev, "%s(%d)\n", __func__, port->line);
+
+ spin_lock_irqsave(&port->lock, flags);
+ sci_stop_rx(port);
+ sci_stop_tx(port);
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ sci_free_dma(port);
+ sci_free_irq(s);
+}
+
+static unsigned int sci_scbrr_calc(struct sci_port *s, unsigned int bps,
+ unsigned long freq)
+{
+ if (s->sampling_rate)
+ return DIV_ROUND_CLOSEST(freq, s->sampling_rate * bps) - 1;
+
+ /* Warn, but use a safe default */
+ WARN_ON(1);
+
+ return ((freq + 16 * bps) / (32 * bps) - 1);
+}
+
+/* calculate frame length from SMR */
+static int sci_baud_calc_frame_len(unsigned int smr_val)
+{
+ int len = 10;
+
+ if (smr_val & SCSMR_CHR)
+ len--;
+ if (smr_val & SCSMR_PE)
+ len++;
+ if (smr_val & SCSMR_STOP)
+ len++;
+
+ return len;
+}
+
+
+/* calculate sample rate, BRR, and clock select for HSCIF */
+static void sci_baud_calc_hscif(unsigned int bps, unsigned long freq,
+ int *brr, unsigned int *srr,
+ unsigned int *cks, int frame_len)
+{
+ int sr, c, br, err, recv_margin;
+ int min_err = 1000; /* 100% */
+ int recv_max_margin = 0;
+
+ /* Find the combination of sample rate and clock select with the
+ smallest deviation from the desired baud rate. */
+ for (sr = 8; sr <= 32; sr++) {
+ for (c = 0; c <= 3; c++) {
+ /* integerized formulas from HSCIF documentation */
+ br = DIV_ROUND_CLOSEST(freq, (sr *
+ (1 << (2 * c + 1)) * bps)) - 1;
+ br = clamp(br, 0, 255);
+ err = DIV_ROUND_CLOSEST(freq, ((br + 1) * bps * sr *
+ (1 << (2 * c + 1)) / 1000)) -
+ 1000;
+ /* Calc recv margin
+ * M: Receive margin (%)
+ * N: Ratio of bit rate to clock (N = sampling rate)
+ * D: Clock duty (D = 0 to 1.0)
+ * L: Frame length (L = 9 to 12)
+ * F: Absolute value of clock frequency deviation
+ *
+ * M = |(0.5 - 1 / 2 * N) - ((L - 0.5) * F) -
+ * (|D - 0.5| / N * (1 + F))|
+ * NOTE: Usually, treat D for 0.5, F is 0 by this
+ * calculation.
+ */
+ recv_margin = abs((500 -
+ DIV_ROUND_CLOSEST(1000, sr << 1)) / 10);
+ if (abs(min_err) > abs(err)) {
+ min_err = err;
+ recv_max_margin = recv_margin;
+ } else if ((min_err == err) &&
+ (recv_margin > recv_max_margin))
+ recv_max_margin = recv_margin;
+ else
+ continue;
+
+ *brr = br;
+ *srr = sr - 1;
+ *cks = c;
+ }
+ }
+
+ if (min_err == 1000) {
+ WARN_ON(1);
+ /* use defaults */
+ *brr = 255;
+ *srr = 15;
+ *cks = 0;
+ }
+}
+
+static void sci_reset(struct uart_port *port)
+{
+ struct plat_sci_reg *reg;
+ unsigned int status;
+
+ do {
+ status = serial_port_in(port, SCxSR);
+ } while (!(status & SCxSR_TEND(port)));
+
+ serial_port_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */
+
+ reg = sci_getreg(port, SCFCR);
+ if (reg->size)
+ serial_port_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST);
+}
+
+static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
+{
+ struct sci_port *s = to_sci_port(port);
+ struct plat_sci_reg *reg;
+ unsigned int baud, smr_val = 0, max_baud, cks = 0;
+ int t = -1;
+ unsigned int srr = 15;
+
+ if ((termios->c_cflag & CSIZE) == CS7)
+ smr_val |= SCSMR_CHR;
+ if (termios->c_cflag & PARENB)
+ smr_val |= SCSMR_PE;
+ if (termios->c_cflag & PARODD)
+ smr_val |= SCSMR_PE | SCSMR_ODD;
+ if (termios->c_cflag & CSTOPB)
+ smr_val |= SCSMR_STOP;
+
+ /*
+ * earlyprintk comes here early on with port->uartclk set to zero.
+ * the clock framework is not up and running at this point so here
+ * we assume that 115200 is the maximum baud rate. please note that
+ * the baud rate is not programmed during earlyprintk - it is assumed
+ * that the previous boot loader has enabled required clocks and
+ * setup the baud rate generator hardware for us already.
+ */
+ max_baud = port->uartclk ? port->uartclk / 16 : 115200;
+
+ baud = uart_get_baud_rate(port, termios, old, 0, max_baud);
+ if (likely(baud && port->uartclk)) {
+ if (s->cfg->type == PORT_HSCIF) {
+ int frame_len = sci_baud_calc_frame_len(smr_val);
+ sci_baud_calc_hscif(baud, port->uartclk, &t, &srr,
+ &cks, frame_len);
+ } else {
+ t = sci_scbrr_calc(s, baud, port->uartclk);
+ for (cks = 0; t >= 256 && cks <= 3; cks++)
+ t >>= 2;
+ }
+ }
+
+ sci_port_enable(s);
+
+ sci_reset(port);
+
+ smr_val |= serial_port_in(port, SCSMR) & 3;
+
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ dev_dbg(port->dev, "%s: SMR %x, cks %x, t %x, SCSCR %x\n",
+ __func__, smr_val, cks, t, s->cfg->scscr);
+
+ if (t >= 0) {
+ serial_port_out(port, SCSMR, (smr_val & ~SCSMR_CKS) | cks);
+ serial_port_out(port, SCBRR, t);
+ reg = sci_getreg(port, HSSRR);
+ if (reg->size)
+ serial_port_out(port, HSSRR, srr | HSCIF_SRE);
+ udelay((1000000+(baud-1)) / baud); /* Wait one bit interval */
+ } else
+ serial_port_out(port, SCSMR, smr_val);
+
+ sci_init_pins(port, termios->c_cflag);
+
+ reg = sci_getreg(port, SCFCR);
+ if (reg->size) {
+ unsigned short ctrl = serial_port_in(port, SCFCR);
+
+ if (s->cfg->capabilities & SCIx_HAVE_RTSCTS) {
+ if (termios->c_cflag & CRTSCTS)
+ ctrl |= SCFCR_MCE;
+ else
+ ctrl &= ~SCFCR_MCE;
+ }
+
+ /*
+ * As we've done a sci_reset() above, ensure we don't
+ * interfere with the FIFOs while toggling MCE. As the
+ * reset values could still be set, simply mask them out.
+ */
+ ctrl &= ~(SCFCR_RFRST | SCFCR_TFRST);
+
+ serial_port_out(port, SCFCR, ctrl);
+ }
+
+ serial_port_out(port, SCSCR, s->cfg->scscr);
+
+#ifdef CONFIG_SERIAL_SH_SCI_DMA
+ /*
+ * Calculate delay for 2 DMA buffers (4 FIFO).
+ * See drivers/serial/serial_core.c::uart_update_timeout(). With 10
+ * bits (CS8), 250Hz, 115200 baud and 64 bytes FIFO, the above function
+ * calculates 1 jiffie for the data plus 5 jiffies for the "slop(e)."
+ * Then below we calculate 5 jiffies (20ms) for 2 DMA buffers (4 FIFO
+ * sizes), but when performing a faster transfer, value obtained by
+ * this formula is may not enough. Therefore, if value is smaller than
+ * 20msec, this sets 20msec as timeout of DMA.
+ */
+ if (s->chan_rx) {
+ unsigned int bits;
+
+ /* byte size and parity */
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ bits = 7;
+ break;
+ case CS6:
+ bits = 8;
+ break;
+ case CS7:
+ bits = 9;
+ break;
+ default:
+ bits = 10;
+ break;
+ }
+
+ if (termios->c_cflag & CSTOPB)
+ bits++;
+ if (termios->c_cflag & PARENB)
+ bits++;
+ s->rx_timeout = DIV_ROUND_UP((s->buf_len_rx * 2 * bits * HZ) /
+ (baud / 10), 10);
+ dev_dbg(port->dev, "DMA Rx t-out %ums, tty t-out %u jiffies\n",
+ s->rx_timeout * 1000 / HZ, port->timeout);
+ if (s->rx_timeout < msecs_to_jiffies(20))
+ s->rx_timeout = msecs_to_jiffies(20);
+ }
+#endif
+
+ if ((termios->c_cflag & CREAD) != 0)
+ sci_start_rx(port);
+
+ sci_port_disable(s);
+}
+
+static void sci_pm(struct uart_port *port, unsigned int state,
+ unsigned int oldstate)
+{
+ struct sci_port *sci_port = to_sci_port(port);
+
+ switch (state) {
+ case UART_PM_STATE_OFF:
+ sci_port_disable(sci_port);
+ break;
+ default:
+ sci_port_enable(sci_port);
+ break;
+ }
+}
+
+static const char *sci_type(struct uart_port *port)
+{
+ switch (port->type) {
+ case PORT_IRDA:
+ return "irda";
+ case PORT_SCI:
+ return "sci";
+ case PORT_SCIF:
+ return "scif";
+ case PORT_SCIFA:
+ return "scifa";
+ case PORT_SCIFB:
+ return "scifb";
+ case PORT_HSCIF:
+ return "hscif";
+ }
+
+ return NULL;
+}
+
+static inline unsigned long sci_port_size(struct uart_port *port)
+{
+ /*
+ * Pick an arbitrary size that encapsulates all of the base
+ * registers by default. This can be optimized later, or derived
+ * from platform resource data at such a time that ports begin to
+ * behave more erratically.
+ */
+ if (port->type == PORT_HSCIF)
+ return 96;
+ else
+ return 64;
+}
+
+static int sci_remap_port(struct uart_port *port)
+{
+ unsigned long size = sci_port_size(port);
+
+ /*
+ * Nothing to do if there's already an established membase.
+ */
+ if (port->membase)
+ return 0;
+
+ if (port->flags & UPF_IOREMAP) {
+ port->membase = ioremap_nocache(port->mapbase, size);
+ if (unlikely(!port->membase)) {
+ dev_err(port->dev, "can't remap port#%d\n", port->line);
+ return -ENXIO;
+ }
+ } else {
+ /*
+ * For the simple (and majority of) cases where we don't
+ * need to do any remapping, just cast the cookie
+ * directly.
+ */
+ port->membase = (void __iomem *)(uintptr_t)port->mapbase;
+ }
+
+ return 0;
+}
+
+static void sci_release_port(struct uart_port *port)
+{
+ if (port->flags & UPF_IOREMAP) {
+ iounmap(port->membase);
+ port->membase = NULL;
+ }
+
+ release_mem_region(port->mapbase, sci_port_size(port));
+}
+
+static int sci_request_port(struct uart_port *port)
+{
+ unsigned long size = sci_port_size(port);
+ struct resource *res;
+ int ret;
+
+ res = request_mem_region(port->mapbase, size, dev_name(port->dev));
+ if (unlikely(res == NULL))
+ return -EBUSY;
+
+ ret = sci_remap_port(port);
+ if (unlikely(ret != 0)) {
+ release_resource(res);
+ return ret;
+ }
+
+ return 0;
+}
+
+static void sci_config_port(struct uart_port *port, int flags)
+{
+ if (flags & UART_CONFIG_TYPE) {
+ struct sci_port *sport = to_sci_port(port);
+
+ port->type = sport->cfg->type;
+ sci_request_port(port);
+ }
+}
+
+static int sci_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ if (ser->baud_base < 2400)
+ /* No paper tape reader for Mitch.. */
+ return -EINVAL;
+
+ return 0;
+}
+
+static struct uart_ops sci_uart_ops = {
+ .tx_empty = sci_tx_empty,
+ .set_mctrl = sci_set_mctrl,
+ .get_mctrl = sci_get_mctrl,
+ .start_tx = sci_start_tx,
+ .stop_tx = sci_stop_tx,
+ .stop_rx = sci_stop_rx,
+ .break_ctl = sci_break_ctl,
+ .startup = sci_startup,
+ .shutdown = sci_shutdown,
+ .set_termios = sci_set_termios,
+ .pm = sci_pm,
+ .type = sci_type,
+ .release_port = sci_release_port,
+ .request_port = sci_request_port,
+ .config_port = sci_config_port,
+ .verify_port = sci_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+ .poll_get_char = sci_poll_get_char,
+ .poll_put_char = sci_poll_put_char,
+#endif
+};
+
+static int sci_init_single(struct platform_device *dev,
+ struct sci_port *sci_port, unsigned int index,
+ struct plat_sci_port *p, bool early)
+{
+ struct uart_port *port = &sci_port->port;
+ const struct resource *res;
+ unsigned int sampling_rate;
+ unsigned int i;
+ int ret;
+
+ sci_port->cfg = p;
+
+ port->ops = &sci_uart_ops;
+ port->iotype = UPIO_MEM;
+ port->line = index;
+
+ res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+ if (res == NULL)
+ return -ENOMEM;
+
+ port->mapbase = res->start;
+
+ for (i = 0; i < ARRAY_SIZE(sci_port->irqs); ++i)
+ sci_port->irqs[i] = platform_get_irq(dev, i);
+
+ /* The SCI generates several interrupts. They can be muxed together or
+ * connected to different interrupt lines. In the muxed case only one
+ * interrupt resource is specified. In the non-muxed case three or four
+ * interrupt resources are specified, as the BRI interrupt is optional.
+ */
+ if (sci_port->irqs[0] < 0)
+ return -ENXIO;
+
+ if (sci_port->irqs[1] < 0) {
+ sci_port->irqs[1] = sci_port->irqs[0];
+ sci_port->irqs[2] = sci_port->irqs[0];
+ sci_port->irqs[3] = sci_port->irqs[0];
+ }
+
+ if (p->regtype == SCIx_PROBE_REGTYPE) {
+ ret = sci_probe_regmap(p);
+ if (unlikely(ret))
+ return ret;
+ }
+
+ switch (p->type) {
+ case PORT_SCIFB:
+ port->fifosize = 256;
+ sci_port->overrun_bit = 9;
+ sampling_rate = 16;
+ break;
+ case PORT_HSCIF:
+ port->fifosize = 128;
+ sampling_rate = 0;
+ sci_port->overrun_bit = 0;
+ break;
+ case PORT_SCIFA:
+ port->fifosize = 64;
+ sci_port->overrun_bit = 9;
+ sampling_rate = 16;
+ break;
+ case PORT_SCIF:
+ port->fifosize = 16;
+ if (p->regtype == SCIx_SH7705_SCIF_REGTYPE) {
+ sci_port->overrun_bit = 9;
+ sampling_rate = 16;
+ } else {
+ sci_port->overrun_bit = 0;
+ sampling_rate = 32;
+ }
+ break;
+ default:
+ port->fifosize = 1;
+ sci_port->overrun_bit = 5;
+ sampling_rate = 32;
+ break;
+ }
+
+ /* SCIFA on sh7723 and sh7724 need a custom sampling rate that doesn't
+ * match the SoC datasheet, this should be investigated. Let platform
+ * data override the sampling rate for now.
+ */
+ sci_port->sampling_rate = p->sampling_rate ? p->sampling_rate
+ : sampling_rate;
+
+ if (!early) {
+ sci_port->iclk = clk_get(&dev->dev, "sci_ick");
+ if (IS_ERR(sci_port->iclk)) {
+ sci_port->iclk = clk_get(&dev->dev, "peripheral_clk");
+ if (IS_ERR(sci_port->iclk)) {
+ dev_err(&dev->dev, "can't get iclk\n");
+ return PTR_ERR(sci_port->iclk);
+ }
+ }
+
+ /*
+ * The function clock is optional, ignore it if we can't
+ * find it.
+ */
+ sci_port->fclk = clk_get(&dev->dev, "sci_fck");
+ if (IS_ERR(sci_port->fclk))
+ sci_port->fclk = NULL;
+
+ port->dev = &dev->dev;
+
+ pm_runtime_enable(&dev->dev);
+ }
+
+ sci_port->break_timer.data = (unsigned long)sci_port;
+ sci_port->break_timer.function = sci_break_timer;
+ init_timer(&sci_port->break_timer);
+
+ /*
+ * Establish some sensible defaults for the error detection.
+ */
+ sci_port->error_mask = (p->type == PORT_SCI) ?
+ SCI_DEFAULT_ERROR_MASK : SCIF_DEFAULT_ERROR_MASK;
+
+ /*
+ * Establish sensible defaults for the overrun detection, unless
+ * the part has explicitly disabled support for it.
+ */
+
+ /*
+ * Make the error mask inclusive of overrun detection, if
+ * supported.
+ */
+ sci_port->error_mask |= 1 << sci_port->overrun_bit;
+
+ port->type = p->type;
+ port->flags = UPF_FIXED_PORT | p->flags;
+ port->regshift = p->regshift;
+
+ /*
+ * The UART port needs an IRQ value, so we peg this to the RX IRQ
+ * for the multi-IRQ ports, which is where we are primarily
+ * concerned with the shutdown path synchronization.
+ *
+ * For the muxed case there's nothing more to do.
+ */
+ port->irq = sci_port->irqs[SCIx_RXI_IRQ];
+ port->irqflags = 0;
+
+ port->serial_in = sci_serial_in;
+ port->serial_out = sci_serial_out;
+
+ if (p->dma_slave_tx > 0 && p->dma_slave_rx > 0)
+ dev_dbg(port->dev, "DMA tx %d, rx %d\n",
+ p->dma_slave_tx, p->dma_slave_rx);
+
+ return 0;
+}
+
+static void sci_cleanup_single(struct sci_port *port)
+{
+ clk_put(port->iclk);
+ clk_put(port->fclk);
+
+ pm_runtime_disable(port->port.dev);
+}
+
+#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
+static void serial_console_putchar(struct uart_port *port, int ch)
+{
+ sci_poll_put_char(port, ch);
+}
+
+/*
+ * Print a string to the serial port trying not to disturb
+ * any possible real use of the port...
+ */
+static void serial_console_write(struct console *co, const char *s,
+ unsigned count)
+{
+ struct sci_port *sci_port = &sci_ports[co->index];
+ struct uart_port *port = &sci_port->port;
+ unsigned short bits, ctrl;
+ unsigned long flags;
+ int locked = 1;
+
+ local_irq_save(flags);
+ if (port->sysrq)
+ locked = 0;
+ else if (oops_in_progress)
+ locked = spin_trylock(&port->lock);
+ else
+ spin_lock(&port->lock);
+
+ /* first save the SCSCR then disable the interrupts */
+ ctrl = serial_port_in(port, SCSCR);
+ serial_port_out(port, SCSCR, sci_port->cfg->scscr);
+
+ uart_console_write(port, s, count, serial_console_putchar);
+
+ /* wait until fifo is empty and last bit has been transmitted */
+ bits = SCxSR_TDxE(port) | SCxSR_TEND(port);
+ while ((serial_port_in(port, SCxSR) & bits) != bits)
+ cpu_relax();
+
+ /* restore the SCSCR */
+ serial_port_out(port, SCSCR, ctrl);
+
+ if (locked)
+ spin_unlock(&port->lock);
+ local_irq_restore(flags);
+}
+
+static int serial_console_setup(struct console *co, char *options)
+{
+ struct sci_port *sci_port;
+ struct uart_port *port;
+ int baud = 115200;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+ int ret;
+
+ /*
+ * Refuse to handle any bogus ports.
+ */
+ if (co->index < 0 || co->index >= SCI_NPORTS)
+ return -ENODEV;
+
+ sci_port = &sci_ports[co->index];
+ port = &sci_port->port;
+
+ /*
+ * Refuse to handle uninitialized ports.
+ */
+ if (!port->ops)
+ return -ENODEV;
+
+ ret = sci_remap_port(port);
+ if (unlikely(ret != 0))
+ return ret;
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+ return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static struct console serial_console = {
+ .name = "ttySC",
+ .device = uart_console_device,
+ .write = serial_console_write,
+ .setup = serial_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &sci_uart_driver,
+};
+
+static struct console early_serial_console = {
+ .name = "early_ttySC",
+ .write = serial_console_write,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+};
+
+static char early_serial_buf[32];
+
+static int sci_probe_earlyprintk(struct platform_device *pdev)
+{
+ struct plat_sci_port *cfg = dev_get_platdata(&pdev->dev);
+
+ if (early_serial_console.data)
+ return -EEXIST;
+
+ early_serial_console.index = pdev->id;
+
+ sci_init_single(pdev, &sci_ports[pdev->id], pdev->id, cfg, true);
+
+ serial_console_setup(&early_serial_console, early_serial_buf);
+
+ if (!strstr(early_serial_buf, "keep"))
+ early_serial_console.flags |= CON_BOOT;
+
+ register_console(&early_serial_console);
+ return 0;
+}
+
+#define SCI_CONSOLE (&serial_console)
+
+#else
+static inline int sci_probe_earlyprintk(struct platform_device *pdev)
+{
+ return -EINVAL;
+}
+
+#define SCI_CONSOLE NULL
+
+#endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */
+
+static const char banner[] __initconst = "SuperH (H)SCI(F) driver initialized";
+
+static struct uart_driver sci_uart_driver = {
+ .owner = THIS_MODULE,
+ .driver_name = "sci",
+ .dev_name = "ttySC",
+ .major = SCI_MAJOR,
+ .minor = SCI_MINOR_START,
+ .nr = SCI_NPORTS,
+ .cons = SCI_CONSOLE,
+};
+
+static int sci_remove(struct platform_device *dev)
+{
+ struct sci_port *port = platform_get_drvdata(dev);
+
+ cpufreq_unregister_notifier(&port->freq_transition,
+ CPUFREQ_TRANSITION_NOTIFIER);
+
+ uart_remove_one_port(&sci_uart_driver, &port->port);
+
+ sci_cleanup_single(port);
+
+ return 0;
+}
+
+struct sci_port_info {
+ unsigned int type;
+ unsigned int regtype;
+};
+
+static const struct of_device_id of_sci_match[] = {
+ {
+ .compatible = "renesas,scif",
+ .data = &(const struct sci_port_info) {
+ .type = PORT_SCIF,
+ .regtype = SCIx_SH4_SCIF_REGTYPE,
+ },
+ }, {
+ .compatible = "renesas,scifa",
+ .data = &(const struct sci_port_info) {
+ .type = PORT_SCIFA,
+ .regtype = SCIx_SCIFA_REGTYPE,
+ },
+ }, {
+ .compatible = "renesas,scifb",
+ .data = &(const struct sci_port_info) {
+ .type = PORT_SCIFB,
+ .regtype = SCIx_SCIFB_REGTYPE,
+ },
+ }, {
+ .compatible = "renesas,hscif",
+ .data = &(const struct sci_port_info) {
+ .type = PORT_HSCIF,
+ .regtype = SCIx_HSCIF_REGTYPE,
+ },
+ }, {
+ /* Terminator */
+ },
+};
+MODULE_DEVICE_TABLE(of, of_sci_match);
+
+static struct plat_sci_port *
+sci_parse_dt(struct platform_device *pdev, unsigned int *dev_id)
+{
+ struct device_node *np = pdev->dev.of_node;
+ const struct of_device_id *match;
+ const struct sci_port_info *info;
+ struct plat_sci_port *p;
+ int id;
+
+ if (!IS_ENABLED(CONFIG_OF) || !np)
+ return NULL;
+
+ match = of_match_node(of_sci_match, pdev->dev.of_node);
+ if (!match)
+ return NULL;
+
+ info = match->data;
+
+ p = devm_kzalloc(&pdev->dev, sizeof(struct plat_sci_port), GFP_KERNEL);
+ if (!p) {
+ dev_err(&pdev->dev, "failed to allocate DT config data\n");
+ return NULL;
+ }
+
+ /* Get the line number for the aliases node. */
+ id = of_alias_get_id(np, "serial");
+ if (id < 0) {
+ dev_err(&pdev->dev, "failed to get alias id (%d)\n", id);
+ return NULL;
+ }
+
+ *dev_id = id;
+
+ p->flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
+ p->type = info->type;
+ p->regtype = info->regtype;
+ p->scscr = SCSCR_RE | SCSCR_TE;
+
+ return p;
+}
+
+static int sci_probe_single(struct platform_device *dev,
+ unsigned int index,
+ struct plat_sci_port *p,
+ struct sci_port *sciport)
+{
+ int ret;
+
+ /* Sanity check */
+ if (unlikely(index >= SCI_NPORTS)) {
+ dev_notice(&dev->dev, "Attempting to register port %d when only %d are available\n",
+ index+1, SCI_NPORTS);
+ dev_notice(&dev->dev, "Consider bumping CONFIG_SERIAL_SH_SCI_NR_UARTS!\n");
+ return -EINVAL;
+ }
+
+ ret = sci_init_single(dev, sciport, index, p, false);
+ if (ret)
+ return ret;
+
+ ret = uart_add_one_port(&sci_uart_driver, &sciport->port);
+ if (ret) {
+ sci_cleanup_single(sciport);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int sci_probe(struct platform_device *dev)
+{
+ struct plat_sci_port *p;
+ struct sci_port *sp;
+ unsigned int dev_id;
+ int ret;
+
+ /*
+ * If we've come here via earlyprintk initialization, head off to
+ * the special early probe. We don't have sufficient device state
+ * to make it beyond this yet.
+ */
+ if (is_early_platform_device(dev))
+ return sci_probe_earlyprintk(dev);
+
+ if (dev->dev.of_node) {
+ p = sci_parse_dt(dev, &dev_id);
+ if (p == NULL)
+ return -EINVAL;
+ } else {
+ p = dev->dev.platform_data;
+ if (p == NULL) {
+ dev_err(&dev->dev, "no platform data supplied\n");
+ return -EINVAL;
+ }
+
+ dev_id = dev->id;
+ }
+
+ sp = &sci_ports[dev_id];
+ platform_set_drvdata(dev, sp);
+
+ ret = sci_probe_single(dev, dev_id, p, sp);
+ if (ret)
+ return ret;
+
+ sp->freq_transition.notifier_call = sci_notifier;
+
+ ret = cpufreq_register_notifier(&sp->freq_transition,
+ CPUFREQ_TRANSITION_NOTIFIER);
+ if (unlikely(ret < 0)) {
+ uart_remove_one_port(&sci_uart_driver, &sp->port);
+ sci_cleanup_single(sp);
+ return ret;
+ }
+
+#ifdef CONFIG_SH_STANDARD_BIOS
+ sh_bios_gdb_detach();
+#endif
+
+ return 0;
+}
+
+static __maybe_unused int sci_suspend(struct device *dev)
+{
+ struct sci_port *sport = dev_get_drvdata(dev);
+
+ if (sport)
+ uart_suspend_port(&sci_uart_driver, &sport->port);
+
+ return 0;
+}
+
+static __maybe_unused int sci_resume(struct device *dev)
+{
+ struct sci_port *sport = dev_get_drvdata(dev);
+
+ if (sport)
+ uart_resume_port(&sci_uart_driver, &sport->port);
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(sci_dev_pm_ops, sci_suspend, sci_resume);
+
+static struct platform_driver sci_driver = {
+ .probe = sci_probe,
+ .remove = sci_remove,
+ .driver = {
+ .name = "sh-sci",
+ .pm = &sci_dev_pm_ops,
+ .of_match_table = of_match_ptr(of_sci_match),
+ },
+};
+
+static int __init sci_init(void)
+{
+ int ret;
+
+ pr_info("%s\n", banner);
+
+ ret = uart_register_driver(&sci_uart_driver);
+ if (likely(ret == 0)) {
+ ret = platform_driver_register(&sci_driver);
+ if (unlikely(ret))
+ uart_unregister_driver(&sci_uart_driver);
+ }
+
+ return ret;
+}
+
+static void __exit sci_exit(void)
+{
+ platform_driver_unregister(&sci_driver);
+ uart_unregister_driver(&sci_uart_driver);
+}
+
+#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
+early_platform_init_buffer("earlyprintk", &sci_driver,
+ early_serial_buf, ARRAY_SIZE(early_serial_buf));
+#endif
+module_init(sci_init);
+module_exit(sci_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:sh-sci");
+MODULE_AUTHOR("Paul Mundt");
+MODULE_DESCRIPTION("SuperH (H)SCI(F) serial driver");