diff options
Diffstat (limited to 'kernel/drivers/tty/serial/pxa.c')
| -rw-r--r-- | kernel/drivers/tty/serial/pxa.c | 968 |
1 files changed, 968 insertions, 0 deletions
diff --git a/kernel/drivers/tty/serial/pxa.c b/kernel/drivers/tty/serial/pxa.c new file mode 100644 index 000000000..9becba654 --- /dev/null +++ b/kernel/drivers/tty/serial/pxa.c @@ -0,0 +1,968 @@ +/* + * Based on drivers/serial/8250.c by Russell King. + * + * Author: Nicolas Pitre + * Created: Feb 20, 2003 + * Copyright: (C) 2003 Monta Vista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Note 1: This driver is made separate from the already too overloaded + * 8250.c because it needs some kirks of its own and that'll make it + * easier to add DMA support. + * + * Note 2: I'm too sick of device allocation policies for serial ports. + * If someone else wants to request an "official" allocation of major/minor + * for this driver please be my guest. And don't forget that new hardware + * to come from Intel might have more than 3 or 4 of those UARTs. Let's + * hope for a better port registration and dynamic device allocation scheme + * with the serial core maintainer satisfaction to appear soon. + */ + + +#if defined(CONFIG_SERIAL_PXA_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include <linux/module.h> +#include <linux/ioport.h> +#include <linux/init.h> +#include <linux/console.h> +#include <linux/sysrq.h> +#include <linux/serial_reg.h> +#include <linux/circ_buf.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <linux/serial_core.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/slab.h> + +#define PXA_NAME_LEN 8 + +struct uart_pxa_port { + struct uart_port port; + unsigned char ier; + unsigned char lcr; + unsigned char mcr; + unsigned int lsr_break_flag; + struct clk *clk; + char name[PXA_NAME_LEN]; +}; + +static inline unsigned int serial_in(struct uart_pxa_port *up, int offset) +{ + offset <<= 2; + return readl(up->port.membase + offset); +} + +static inline void serial_out(struct uart_pxa_port *up, int offset, int value) +{ + offset <<= 2; + writel(value, up->port.membase + offset); +} + +static void serial_pxa_enable_ms(struct uart_port *port) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + + up->ier |= UART_IER_MSI; + serial_out(up, UART_IER, up->ier); +} + +static void serial_pxa_stop_tx(struct uart_port *port) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + + if (up->ier & UART_IER_THRI) { + up->ier &= ~UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + } +} + +static void serial_pxa_stop_rx(struct uart_port *port) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + + up->ier &= ~UART_IER_RLSI; + up->port.read_status_mask &= ~UART_LSR_DR; + serial_out(up, UART_IER, up->ier); +} + +static inline void receive_chars(struct uart_pxa_port *up, int *status) +{ + unsigned int ch, flag; + int max_count = 256; + + do { + /* work around Errata #20 according to + * Intel(R) PXA27x Processor Family + * Specification Update (May 2005) + * + * Step 2 + * Disable the Reciever Time Out Interrupt via IER[RTOEI] + */ + up->ier &= ~UART_IER_RTOIE; + serial_out(up, UART_IER, up->ier); + + ch = serial_in(up, UART_RX); + flag = TTY_NORMAL; + up->port.icount.rx++; + + if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE | + UART_LSR_FE | UART_LSR_OE))) { + /* + * For statistics only + */ + if (*status & UART_LSR_BI) { + *status &= ~(UART_LSR_FE | UART_LSR_PE); + up->port.icount.brk++; + /* + * We do the SysRQ and SAK checking + * here because otherwise the break + * may get masked by ignore_status_mask + * or read_status_mask. + */ + if (uart_handle_break(&up->port)) + goto ignore_char; + } else if (*status & UART_LSR_PE) + up->port.icount.parity++; + else if (*status & UART_LSR_FE) + up->port.icount.frame++; + if (*status & UART_LSR_OE) + up->port.icount.overrun++; + + /* + * Mask off conditions which should be ignored. + */ + *status &= up->port.read_status_mask; + +#ifdef CONFIG_SERIAL_PXA_CONSOLE + if (up->port.line == up->port.cons->index) { + /* Recover the break flag from console xmit */ + *status |= up->lsr_break_flag; + up->lsr_break_flag = 0; + } +#endif + if (*status & UART_LSR_BI) { + flag = TTY_BREAK; + } else if (*status & UART_LSR_PE) + flag = TTY_PARITY; + else if (*status & UART_LSR_FE) + flag = TTY_FRAME; + } + + if (uart_handle_sysrq_char(&up->port, ch)) + goto ignore_char; + + uart_insert_char(&up->port, *status, UART_LSR_OE, ch, flag); + + ignore_char: + *status = serial_in(up, UART_LSR); + } while ((*status & UART_LSR_DR) && (max_count-- > 0)); + tty_flip_buffer_push(&up->port.state->port); + + /* work around Errata #20 according to + * Intel(R) PXA27x Processor Family + * Specification Update (May 2005) + * + * Step 6: + * No more data in FIFO: Re-enable RTO interrupt via IER[RTOIE] + */ + up->ier |= UART_IER_RTOIE; + serial_out(up, UART_IER, up->ier); +} + +static void transmit_chars(struct uart_pxa_port *up) +{ + struct circ_buf *xmit = &up->port.state->xmit; + int count; + + if (up->port.x_char) { + serial_out(up, UART_TX, up->port.x_char); + up->port.icount.tx++; + up->port.x_char = 0; + return; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { + serial_pxa_stop_tx(&up->port); + return; + } + + count = up->port.fifosize / 2; + do { + serial_out(up, UART_TX, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + up->port.icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&up->port); + + + if (uart_circ_empty(xmit)) + serial_pxa_stop_tx(&up->port); +} + +static void serial_pxa_start_tx(struct uart_port *port) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + + if (!(up->ier & UART_IER_THRI)) { + up->ier |= UART_IER_THRI; + serial_out(up, UART_IER, up->ier); + } +} + +/* should hold up->port.lock */ +static inline void check_modem_status(struct uart_pxa_port *up) +{ + int status; + + status = serial_in(up, UART_MSR); + + if ((status & UART_MSR_ANY_DELTA) == 0) + return; + + if (status & UART_MSR_TERI) + up->port.icount.rng++; + if (status & UART_MSR_DDSR) + up->port.icount.dsr++; + if (status & UART_MSR_DDCD) + uart_handle_dcd_change(&up->port, status & UART_MSR_DCD); + if (status & UART_MSR_DCTS) + uart_handle_cts_change(&up->port, status & UART_MSR_CTS); + + wake_up_interruptible(&up->port.state->port.delta_msr_wait); +} + +/* + * This handles the interrupt from one port. + */ +static inline irqreturn_t serial_pxa_irq(int irq, void *dev_id) +{ + struct uart_pxa_port *up = dev_id; + unsigned int iir, lsr; + + iir = serial_in(up, UART_IIR); + if (iir & UART_IIR_NO_INT) + return IRQ_NONE; + spin_lock(&up->port.lock); + lsr = serial_in(up, UART_LSR); + if (lsr & UART_LSR_DR) + receive_chars(up, &lsr); + check_modem_status(up); + if (lsr & UART_LSR_THRE) + transmit_chars(up); + spin_unlock(&up->port.lock); + return IRQ_HANDLED; +} + +static unsigned int serial_pxa_tx_empty(struct uart_port *port) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + unsigned long flags; + unsigned int ret; + + spin_lock_irqsave(&up->port.lock, flags); + ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0; + spin_unlock_irqrestore(&up->port.lock, flags); + + return ret; +} + +static unsigned int serial_pxa_get_mctrl(struct uart_port *port) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + unsigned char status; + unsigned int ret; + + status = serial_in(up, UART_MSR); + + ret = 0; + if (status & UART_MSR_DCD) + ret |= TIOCM_CAR; + if (status & UART_MSR_RI) + ret |= TIOCM_RNG; + if (status & UART_MSR_DSR) + ret |= TIOCM_DSR; + if (status & UART_MSR_CTS) + ret |= TIOCM_CTS; + return ret; +} + +static void serial_pxa_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + unsigned char mcr = 0; + + if (mctrl & TIOCM_RTS) + mcr |= UART_MCR_RTS; + if (mctrl & TIOCM_DTR) + mcr |= UART_MCR_DTR; + if (mctrl & TIOCM_OUT1) + mcr |= UART_MCR_OUT1; + if (mctrl & TIOCM_OUT2) + mcr |= UART_MCR_OUT2; + if (mctrl & TIOCM_LOOP) + mcr |= UART_MCR_LOOP; + + mcr |= up->mcr; + + serial_out(up, UART_MCR, mcr); +} + +static void serial_pxa_break_ctl(struct uart_port *port, int break_state) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + unsigned long flags; + + spin_lock_irqsave(&up->port.lock, flags); + if (break_state == -1) + up->lcr |= UART_LCR_SBC; + else + up->lcr &= ~UART_LCR_SBC; + serial_out(up, UART_LCR, up->lcr); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static int serial_pxa_startup(struct uart_port *port) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + unsigned long flags; + int retval; + + if (port->line == 3) /* HWUART */ + up->mcr |= UART_MCR_AFE; + else + up->mcr = 0; + + up->port.uartclk = clk_get_rate(up->clk); + + /* + * Allocate the IRQ + */ + retval = request_irq(up->port.irq, serial_pxa_irq, 0, up->name, up); + if (retval) + return retval; + + /* + * Clear the FIFO buffers and disable them. + * (they will be reenabled in set_termios()) + */ + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO); + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); + serial_out(up, UART_FCR, 0); + + /* + * Clear the interrupt registers. + */ + (void) serial_in(up, UART_LSR); + (void) serial_in(up, UART_RX); + (void) serial_in(up, UART_IIR); + (void) serial_in(up, UART_MSR); + + /* + * Now, initialize the UART + */ + serial_out(up, UART_LCR, UART_LCR_WLEN8); + + spin_lock_irqsave(&up->port.lock, flags); + up->port.mctrl |= TIOCM_OUT2; + serial_pxa_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); + + /* + * Finally, enable interrupts. Note: Modem status interrupts + * are set via set_termios(), which will be occurring imminently + * anyway, so we don't enable them here. + */ + up->ier = UART_IER_RLSI | UART_IER_RDI | UART_IER_RTOIE | UART_IER_UUE; + serial_out(up, UART_IER, up->ier); + + /* + * And clear the interrupt registers again for luck. + */ + (void) serial_in(up, UART_LSR); + (void) serial_in(up, UART_RX); + (void) serial_in(up, UART_IIR); + (void) serial_in(up, UART_MSR); + + return 0; +} + +static void serial_pxa_shutdown(struct uart_port *port) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + unsigned long flags; + + free_irq(up->port.irq, up); + + /* + * Disable interrupts from this port + */ + up->ier = 0; + serial_out(up, UART_IER, 0); + + spin_lock_irqsave(&up->port.lock, flags); + up->port.mctrl &= ~TIOCM_OUT2; + serial_pxa_set_mctrl(&up->port, up->port.mctrl); + spin_unlock_irqrestore(&up->port.lock, flags); + + /* + * Disable break condition and FIFOs + */ + serial_out(up, UART_LCR, serial_in(up, UART_LCR) & ~UART_LCR_SBC); + serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | + UART_FCR_CLEAR_XMIT); + serial_out(up, UART_FCR, 0); +} + +static void +serial_pxa_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + unsigned char cval, fcr = 0; + unsigned long flags; + unsigned int baud, quot; + unsigned int dll; + + switch (termios->c_cflag & CSIZE) { + case CS5: + cval = UART_LCR_WLEN5; + break; + case CS6: + cval = UART_LCR_WLEN6; + break; + case CS7: + cval = UART_LCR_WLEN7; + break; + default: + case CS8: + cval = UART_LCR_WLEN8; + break; + } + + if (termios->c_cflag & CSTOPB) + cval |= UART_LCR_STOP; + if (termios->c_cflag & PARENB) + cval |= UART_LCR_PARITY; + if (!(termios->c_cflag & PARODD)) + cval |= UART_LCR_EPAR; + + /* + * Ask the core to calculate the divisor for us. + */ + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); + quot = uart_get_divisor(port, baud); + + if ((up->port.uartclk / quot) < (2400 * 16)) + fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR1; + else if ((up->port.uartclk / quot) < (230400 * 16)) + fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR8; + else + fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR32; + + /* + * Ok, we're now changing the port state. Do it with + * interrupts disabled. + */ + spin_lock_irqsave(&up->port.lock, flags); + + /* + * Ensure the port will be enabled. + * This is required especially for serial console. + */ + up->ier |= UART_IER_UUE; + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; + if (termios->c_iflag & INPCK) + up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; + if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) + up->port.read_status_mask |= UART_LSR_BI; + + /* + * Characters to ignore + */ + up->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; + if (termios->c_iflag & IGNBRK) { + up->port.ignore_status_mask |= UART_LSR_BI; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + up->port.ignore_status_mask |= UART_LSR_OE; + } + + /* + * ignore all characters if CREAD is not set + */ + if ((termios->c_cflag & CREAD) == 0) + up->port.ignore_status_mask |= UART_LSR_DR; + + /* + * CTS flow control flag and modem status interrupts + */ + up->ier &= ~UART_IER_MSI; + if (UART_ENABLE_MS(&up->port, termios->c_cflag)) + up->ier |= UART_IER_MSI; + + serial_out(up, UART_IER, up->ier); + + if (termios->c_cflag & CRTSCTS) + up->mcr |= UART_MCR_AFE; + else + up->mcr &= ~UART_MCR_AFE; + + serial_out(up, UART_LCR, cval | UART_LCR_DLAB); /* set DLAB */ + serial_out(up, UART_DLL, quot & 0xff); /* LS of divisor */ + + /* + * work around Errata #75 according to Intel(R) PXA27x Processor Family + * Specification Update (Nov 2005) + */ + dll = serial_in(up, UART_DLL); + WARN_ON(dll != (quot & 0xff)); + + serial_out(up, UART_DLM, quot >> 8); /* MS of divisor */ + serial_out(up, UART_LCR, cval); /* reset DLAB */ + up->lcr = cval; /* Save LCR */ + serial_pxa_set_mctrl(&up->port, up->port.mctrl); + serial_out(up, UART_FCR, fcr); + spin_unlock_irqrestore(&up->port.lock, flags); +} + +static void +serial_pxa_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + + if (!state) + clk_prepare_enable(up->clk); + else + clk_disable_unprepare(up->clk); +} + +static void serial_pxa_release_port(struct uart_port *port) +{ +} + +static int serial_pxa_request_port(struct uart_port *port) +{ + return 0; +} + +static void serial_pxa_config_port(struct uart_port *port, int flags) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + up->port.type = PORT_PXA; +} + +static int +serial_pxa_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + /* we don't want the core code to modify any port params */ + return -EINVAL; +} + +static const char * +serial_pxa_type(struct uart_port *port) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + return up->name; +} + +static struct uart_pxa_port *serial_pxa_ports[4]; +static struct uart_driver serial_pxa_reg; + +#ifdef CONFIG_SERIAL_PXA_CONSOLE + +#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) + +/* + * Wait for transmitter & holding register to empty + */ +static inline void wait_for_xmitr(struct uart_pxa_port *up) +{ + unsigned int status, tmout = 10000; + + /* Wait up to 10ms for the character(s) to be sent. */ + do { + status = serial_in(up, UART_LSR); + + if (status & UART_LSR_BI) + up->lsr_break_flag = UART_LSR_BI; + + if (--tmout == 0) + break; + udelay(1); + } while ((status & BOTH_EMPTY) != BOTH_EMPTY); + + /* Wait up to 1s for flow control if necessary */ + if (up->port.flags & UPF_CONS_FLOW) { + tmout = 1000000; + while (--tmout && + ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0)) + udelay(1); + } +} + +static void serial_pxa_console_putchar(struct uart_port *port, int ch) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + + wait_for_xmitr(up); + serial_out(up, UART_TX, ch); +} + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + * + * The console_lock must be held when we get here. + */ +static void +serial_pxa_console_write(struct console *co, const char *s, unsigned int count) +{ + struct uart_pxa_port *up = serial_pxa_ports[co->index]; + unsigned int ier; + unsigned long flags; + int locked = 1; + + clk_enable(up->clk); + local_irq_save(flags); + if (up->port.sysrq) + locked = 0; + else if (oops_in_progress) + locked = spin_trylock(&up->port.lock); + else + spin_lock(&up->port.lock); + + /* + * First save the IER then disable the interrupts + */ + ier = serial_in(up, UART_IER); + serial_out(up, UART_IER, UART_IER_UUE); + + uart_console_write(&up->port, s, count, serial_pxa_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(up); + serial_out(up, UART_IER, ier); + + if (locked) + spin_unlock(&up->port.lock); + local_irq_restore(flags); + clk_disable(up->clk); + +} + +#ifdef CONFIG_CONSOLE_POLL +/* + * Console polling routines for writing and reading from the uart while + * in an interrupt or debug context. + */ + +static int serial_pxa_get_poll_char(struct uart_port *port) +{ + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + unsigned char lsr = serial_in(up, UART_LSR); + + while (!(lsr & UART_LSR_DR)) + lsr = serial_in(up, UART_LSR); + + return serial_in(up, UART_RX); +} + + +static void serial_pxa_put_poll_char(struct uart_port *port, + unsigned char c) +{ + unsigned int ier; + struct uart_pxa_port *up = (struct uart_pxa_port *)port; + + /* + * First save the IER then disable the interrupts + */ + ier = serial_in(up, UART_IER); + serial_out(up, UART_IER, UART_IER_UUE); + + wait_for_xmitr(up); + /* + * Send the character out. + */ + serial_out(up, UART_TX, c); + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(up); + serial_out(up, UART_IER, ier); +} + +#endif /* CONFIG_CONSOLE_POLL */ + +static int __init +serial_pxa_console_setup(struct console *co, char *options) +{ + struct uart_pxa_port *up; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (co->index == -1 || co->index >= serial_pxa_reg.nr) + co->index = 0; + up = serial_pxa_ports[co->index]; + if (!up) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(&up->port, co, baud, parity, bits, flow); +} + +static struct console serial_pxa_console = { + .name = "ttyS", + .write = serial_pxa_console_write, + .device = uart_console_device, + .setup = serial_pxa_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &serial_pxa_reg, +}; + +#define PXA_CONSOLE &serial_pxa_console +#else +#define PXA_CONSOLE NULL +#endif + +static struct uart_ops serial_pxa_pops = { + .tx_empty = serial_pxa_tx_empty, + .set_mctrl = serial_pxa_set_mctrl, + .get_mctrl = serial_pxa_get_mctrl, + .stop_tx = serial_pxa_stop_tx, + .start_tx = serial_pxa_start_tx, + .stop_rx = serial_pxa_stop_rx, + .enable_ms = serial_pxa_enable_ms, + .break_ctl = serial_pxa_break_ctl, + .startup = serial_pxa_startup, + .shutdown = serial_pxa_shutdown, + .set_termios = serial_pxa_set_termios, + .pm = serial_pxa_pm, + .type = serial_pxa_type, + .release_port = serial_pxa_release_port, + .request_port = serial_pxa_request_port, + .config_port = serial_pxa_config_port, + .verify_port = serial_pxa_verify_port, +#if defined(CONFIG_CONSOLE_POLL) && defined(CONFIG_SERIAL_PXA_CONSOLE) + .poll_get_char = serial_pxa_get_poll_char, + .poll_put_char = serial_pxa_put_poll_char, +#endif +}; + +static struct uart_driver serial_pxa_reg = { + .owner = THIS_MODULE, + .driver_name = "PXA serial", + .dev_name = "ttyS", + .major = TTY_MAJOR, + .minor = 64, + .nr = 4, + .cons = PXA_CONSOLE, +}; + +#ifdef CONFIG_PM +static int serial_pxa_suspend(struct device *dev) +{ + struct uart_pxa_port *sport = dev_get_drvdata(dev); + + if (sport) + uart_suspend_port(&serial_pxa_reg, &sport->port); + + return 0; +} + +static int serial_pxa_resume(struct device *dev) +{ + struct uart_pxa_port *sport = dev_get_drvdata(dev); + + if (sport) + uart_resume_port(&serial_pxa_reg, &sport->port); + + return 0; +} + +static const struct dev_pm_ops serial_pxa_pm_ops = { + .suspend = serial_pxa_suspend, + .resume = serial_pxa_resume, +}; +#endif + +static const struct of_device_id serial_pxa_dt_ids[] = { + { .compatible = "mrvl,pxa-uart", }, + { .compatible = "mrvl,mmp-uart", }, + {} +}; +MODULE_DEVICE_TABLE(of, serial_pxa_dt_ids); + +static int serial_pxa_probe_dt(struct platform_device *pdev, + struct uart_pxa_port *sport) +{ + struct device_node *np = pdev->dev.of_node; + int ret; + + if (!np) + return 1; + + ret = of_alias_get_id(np, "serial"); + if (ret < 0) { + dev_err(&pdev->dev, "failed to get alias id, errno %d\n", ret); + return ret; + } + sport->port.line = ret; + return 0; +} + +static int serial_pxa_probe(struct platform_device *dev) +{ + struct uart_pxa_port *sport; + struct resource *mmres, *irqres; + int ret; + + mmres = platform_get_resource(dev, IORESOURCE_MEM, 0); + irqres = platform_get_resource(dev, IORESOURCE_IRQ, 0); + if (!mmres || !irqres) + return -ENODEV; + + sport = kzalloc(sizeof(struct uart_pxa_port), GFP_KERNEL); + if (!sport) + return -ENOMEM; + + sport->clk = clk_get(&dev->dev, NULL); + if (IS_ERR(sport->clk)) { + ret = PTR_ERR(sport->clk); + goto err_free; + } + + ret = clk_prepare(sport->clk); + if (ret) { + clk_put(sport->clk); + goto err_free; + } + + sport->port.type = PORT_PXA; + sport->port.iotype = UPIO_MEM; + sport->port.mapbase = mmres->start; + sport->port.irq = irqres->start; + sport->port.fifosize = 64; + sport->port.ops = &serial_pxa_pops; + sport->port.dev = &dev->dev; + sport->port.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF; + sport->port.uartclk = clk_get_rate(sport->clk); + + ret = serial_pxa_probe_dt(dev, sport); + if (ret > 0) + sport->port.line = dev->id; + else if (ret < 0) + goto err_clk; + snprintf(sport->name, PXA_NAME_LEN - 1, "UART%d", sport->port.line + 1); + + sport->port.membase = ioremap(mmres->start, resource_size(mmres)); + if (!sport->port.membase) { + ret = -ENOMEM; + goto err_clk; + } + + serial_pxa_ports[sport->port.line] = sport; + + uart_add_one_port(&serial_pxa_reg, &sport->port); + platform_set_drvdata(dev, sport); + + return 0; + + err_clk: + clk_unprepare(sport->clk); + clk_put(sport->clk); + err_free: + kfree(sport); + return ret; +} + +static int serial_pxa_remove(struct platform_device *dev) +{ + struct uart_pxa_port *sport = platform_get_drvdata(dev); + + uart_remove_one_port(&serial_pxa_reg, &sport->port); + + clk_unprepare(sport->clk); + clk_put(sport->clk); + kfree(sport); + + return 0; +} + +static struct platform_driver serial_pxa_driver = { + .probe = serial_pxa_probe, + .remove = serial_pxa_remove, + + .driver = { + .name = "pxa2xx-uart", +#ifdef CONFIG_PM + .pm = &serial_pxa_pm_ops, +#endif + .of_match_table = serial_pxa_dt_ids, + }, +}; + +static int __init serial_pxa_init(void) +{ + int ret; + + ret = uart_register_driver(&serial_pxa_reg); + if (ret != 0) + return ret; + + ret = platform_driver_register(&serial_pxa_driver); + if (ret != 0) + uart_unregister_driver(&serial_pxa_reg); + + return ret; +} + +static void __exit serial_pxa_exit(void) +{ + platform_driver_unregister(&serial_pxa_driver); + uart_unregister_driver(&serial_pxa_reg); +} + +module_init(serial_pxa_init); +module_exit(serial_pxa_exit); + +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:pxa2xx-uart"); |