1 files changed, 1138 insertions, 0 deletions

diff --git a/kernel/drivers/tty/serial/msm_serial.c b/kernel/drivers/tty/serial/msm_serial.c
new file mode 100644
index 000000000..b73889c8e
--- /dev/null
+++ b/kernel/drivers/tty/serial/msm_serial.c
@@ -0,0 +1,1138 @@
+/*
+ * Driver for msm7k serial device and console
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Robert Love <rlove@google.com>
+ * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#if defined(CONFIG_SERIAL_MSM_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+# define SUPPORT_SYSRQ
+#endif
+
+#include <linux/atomic.h>
+#include <linux/hrtimer.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/irq.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
+#include "msm_serial.h"
+
+enum {
+	UARTDM_1P1 = 1,
+	UARTDM_1P2,
+	UARTDM_1P3,
+	UARTDM_1P4,
+};
+
+struct msm_port {
+	struct uart_port	uart;
+	char			name[16];
+	struct clk		*clk;
+	struct clk		*pclk;
+	unsigned int		imr;
+	int			is_uartdm;
+	unsigned int		old_snap_state;
+	bool			break_detected;
+};
+
+static inline void wait_for_xmitr(struct uart_port *port)
+{
+	while (!(msm_read(port, UART_SR) & UART_SR_TX_EMPTY)) {
+		if (msm_read(port, UART_ISR) & UART_ISR_TX_READY)
+			break;
+		udelay(1);
+	}
+	msm_write(port, UART_CR_CMD_RESET_TX_READY, UART_CR);
+}
+
+static void msm_stop_tx(struct uart_port *port)
+{
+	struct msm_port *msm_port = UART_TO_MSM(port);
+
+	msm_port->imr &= ~UART_IMR_TXLEV;
+	msm_write(port, msm_port->imr, UART_IMR);
+}
+
+static void msm_start_tx(struct uart_port *port)
+{
+	struct msm_port *msm_port = UART_TO_MSM(port);
+
+	msm_port->imr |= UART_IMR_TXLEV;
+	msm_write(port, msm_port->imr, UART_IMR);
+}
+
+static void msm_stop_rx(struct uart_port *port)
+{
+	struct msm_port *msm_port = UART_TO_MSM(port);
+
+	msm_port->imr &= ~(UART_IMR_RXLEV | UART_IMR_RXSTALE);
+	msm_write(port, msm_port->imr, UART_IMR);
+}
+
+static void msm_enable_ms(struct uart_port *port)
+{
+	struct msm_port *msm_port = UART_TO_MSM(port);
+
+	msm_port->imr |= UART_IMR_DELTA_CTS;
+	msm_write(port, msm_port->imr, UART_IMR);
+}
+
+static void handle_rx_dm(struct uart_port *port, unsigned int misr)
+{
+	struct tty_port *tport = &port->state->port;
+	unsigned int sr;
+	int count = 0;
+	struct msm_port *msm_port = UART_TO_MSM(port);
+
+	if ((msm_read(port, UART_SR) & UART_SR_OVERRUN)) {
+		port->icount.overrun++;
+		tty_insert_flip_char(tport, 0, TTY_OVERRUN);
+		msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR);
+	}
+
+	if (misr & UART_IMR_RXSTALE) {
+		count = msm_read(port, UARTDM_RX_TOTAL_SNAP) -
+			msm_port->old_snap_state;
+		msm_port->old_snap_state = 0;
+	} else {
+		count = 4 * (msm_read(port, UART_RFWR));
+		msm_port->old_snap_state += count;
+	}
+
+	/* TODO: Precise error reporting */
+
+	port->icount.rx += count;
+
+	while (count > 0) {
+		unsigned char buf[4];
+		int sysrq, r_count, i;
+
+		sr = msm_read(port, UART_SR);
+		if ((sr & UART_SR_RX_READY) == 0) {
+			msm_port->old_snap_state -= count;
+			break;
+		}
+
+		ioread32_rep(port->membase + UARTDM_RF, buf, 1);
+		r_count = min_t(int, count, sizeof(buf));
+
+		for (i = 0; i < r_count; i++) {
+			char flag = TTY_NORMAL;
+
+			if (msm_port->break_detected && buf[i] == 0) {
+				port->icount.brk++;
+				flag = TTY_BREAK;
+				msm_port->break_detected = false;
+				if (uart_handle_break(port))
+					continue;
+			}
+
+			if (!(port->read_status_mask & UART_SR_RX_BREAK))
+				flag = TTY_NORMAL;
+
+			spin_unlock(&port->lock);
+			sysrq = uart_handle_sysrq_char(port, buf[i]);
+			spin_lock(&port->lock);
+			if (!sysrq)
+				tty_insert_flip_char(tport, buf[i], flag);
+		}
+		count -= r_count;
+	}
+
+	spin_unlock(&port->lock);
+	tty_flip_buffer_push(tport);
+	spin_lock(&port->lock);
+
+	if (misr & (UART_IMR_RXSTALE))
+		msm_write(port, UART_CR_CMD_RESET_STALE_INT, UART_CR);
+	msm_write(port, 0xFFFFFF, UARTDM_DMRX);
+	msm_write(port, UART_CR_CMD_STALE_EVENT_ENABLE, UART_CR);
+}
+
+static void handle_rx(struct uart_port *port)
+{
+	struct tty_port *tport = &port->state->port;
+	unsigned int sr;
+
+	/*
+	 * Handle overrun. My understanding of the hardware is that overrun
+	 * is not tied to the RX buffer, so we handle the case out of band.
+	 */
+	if ((msm_read(port, UART_SR) & UART_SR_OVERRUN)) {
+		port->icount.overrun++;
+		tty_insert_flip_char(tport, 0, TTY_OVERRUN);
+		msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR);
+	}
+
+	/* and now the main RX loop */
+	while ((sr = msm_read(port, UART_SR)) & UART_SR_RX_READY) {
+		unsigned int c;
+		char flag = TTY_NORMAL;
+		int sysrq;
+
+		c = msm_read(port, UART_RF);
+
+		if (sr & UART_SR_RX_BREAK) {
+			port->icount.brk++;
+			if (uart_handle_break(port))
+				continue;
+		} else if (sr & UART_SR_PAR_FRAME_ERR) {
+			port->icount.frame++;
+		} else {
+			port->icount.rx++;
+		}
+
+		/* Mask conditions we're ignorning. */
+		sr &= port->read_status_mask;
+
+		if (sr & UART_SR_RX_BREAK)
+			flag = TTY_BREAK;
+		else if (sr & UART_SR_PAR_FRAME_ERR)
+			flag = TTY_FRAME;
+
+		spin_unlock(&port->lock);
+		sysrq = uart_handle_sysrq_char(port, c);
+		spin_lock(&port->lock);
+		if (!sysrq)
+			tty_insert_flip_char(tport, c, flag);
+	}
+
+	spin_unlock(&port->lock);
+	tty_flip_buffer_push(tport);
+	spin_lock(&port->lock);
+}
+
+static void reset_dm_count(struct uart_port *port, int count)
+{
+	wait_for_xmitr(port);
+	msm_write(port, count, UARTDM_NCF_TX);
+	msm_read(port, UARTDM_NCF_TX);
+}
+
+static void handle_tx(struct uart_port *port)
+{
+	struct circ_buf *xmit = &port->state->xmit;
+	struct msm_port *msm_port = UART_TO_MSM(port);
+	unsigned int tx_count, num_chars;
+	unsigned int tf_pointer = 0;
+	void __iomem *tf;
+
+	if (msm_port->is_uartdm)
+		tf = port->membase + UARTDM_TF;
+	else
+		tf = port->membase + UART_TF;
+
+	tx_count = uart_circ_chars_pending(xmit);
+	tx_count = min3(tx_count, (unsigned int)UART_XMIT_SIZE - xmit->tail,
+			port->fifosize);
+
+	if (port->x_char) {
+		if (msm_port->is_uartdm)
+			reset_dm_count(port, tx_count + 1);
+
+		iowrite8_rep(tf, &port->x_char, 1);
+		port->icount.tx++;
+		port->x_char = 0;
+	} else if (tx_count && msm_port->is_uartdm) {
+		reset_dm_count(port, tx_count);
+	}
+
+	while (tf_pointer < tx_count) {
+		int i;
+		char buf[4] = { 0 };
+
+		if (!(msm_read(port, UART_SR) & UART_SR_TX_READY))
+			break;
+
+		if (msm_port->is_uartdm)
+			num_chars = min(tx_count - tf_pointer,
+					(unsigned int)sizeof(buf));
+		else
+			num_chars = 1;
+
+		for (i = 0; i < num_chars; i++) {
+			buf[i] = xmit->buf[xmit->tail + i];
+			port->icount.tx++;
+		}
+
+		iowrite32_rep(tf, buf, 1);
+		xmit->tail = (xmit->tail + num_chars) & (UART_XMIT_SIZE - 1);
+		tf_pointer += num_chars;
+	}
+
+	/* disable tx interrupts if nothing more to send */
+	if (uart_circ_empty(xmit))
+		msm_stop_tx(port);
+
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(port);
+}
+
+static void handle_delta_cts(struct uart_port *port)
+{
+	msm_write(port, UART_CR_CMD_RESET_CTS, UART_CR);
+	port->icount.cts++;
+	wake_up_interruptible(&port->state->port.delta_msr_wait);
+}
+
+static irqreturn_t msm_irq(int irq, void *dev_id)
+{
+	struct uart_port *port = dev_id;
+	struct msm_port *msm_port = UART_TO_MSM(port);
+	unsigned int misr;
+
+	spin_lock(&port->lock);
+	misr = msm_read(port, UART_MISR);
+	msm_write(port, 0, UART_IMR); /* disable interrupt */
+
+	if (misr & UART_IMR_RXBREAK_START) {
+		msm_port->break_detected = true;
+		msm_write(port, UART_CR_CMD_RESET_RXBREAK_START, UART_CR);
+	}
+
+	if (misr & (UART_IMR_RXLEV | UART_IMR_RXSTALE)) {
+		if (msm_port->is_uartdm)
+			handle_rx_dm(port, misr);
+		else
+			handle_rx(port);
+	}
+	if (misr & UART_IMR_TXLEV)
+		handle_tx(port);
+	if (misr & UART_IMR_DELTA_CTS)
+		handle_delta_cts(port);
+
+	msm_write(port, msm_port->imr, UART_IMR); /* restore interrupt */
+	spin_unlock(&port->lock);
+
+	return IRQ_HANDLED;
+}
+
+static unsigned int msm_tx_empty(struct uart_port *port)
+{
+	return (msm_read(port, UART_SR) & UART_SR_TX_EMPTY) ? TIOCSER_TEMT : 0;
+}
+
+static unsigned int msm_get_mctrl(struct uart_port *port)
+{
+	return TIOCM_CAR | TIOCM_CTS | TIOCM_DSR | TIOCM_RTS;
+}
+
+static void msm_reset(struct uart_port *port)
+{
+	struct msm_port *msm_port = UART_TO_MSM(port);
+
+	/* reset everything */
+	msm_write(port, UART_CR_CMD_RESET_RX, UART_CR);
+	msm_write(port, UART_CR_CMD_RESET_TX, UART_CR);
+	msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR);
+	msm_write(port, UART_CR_CMD_RESET_BREAK_INT, UART_CR);
+	msm_write(port, UART_CR_CMD_RESET_CTS, UART_CR);
+	msm_write(port, UART_CR_CMD_SET_RFR, UART_CR);
+
+	/* Disable DM modes */
+	if (msm_port->is_uartdm)
+		msm_write(port, 0, UARTDM_DMEN);
+}
+
+static void msm_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+	unsigned int mr;
+
+	mr = msm_read(port, UART_MR1);
+
+	if (!(mctrl & TIOCM_RTS)) {
+		mr &= ~UART_MR1_RX_RDY_CTL;
+		msm_write(port, mr, UART_MR1);
+		msm_write(port, UART_CR_CMD_RESET_RFR, UART_CR);
+	} else {
+		mr |= UART_MR1_RX_RDY_CTL;
+		msm_write(port, mr, UART_MR1);
+	}
+}
+
+static void msm_break_ctl(struct uart_port *port, int break_ctl)
+{
+	if (break_ctl)
+		msm_write(port, UART_CR_CMD_START_BREAK, UART_CR);
+	else
+		msm_write(port, UART_CR_CMD_STOP_BREAK, UART_CR);
+}
+
+struct msm_baud_map {
+	u16	divisor;
+	u8	code;
+	u8	rxstale;
+};
+
+static const struct msm_baud_map *
+msm_find_best_baud(struct uart_port *port, unsigned int baud)
+{
+	unsigned int i, divisor;
+	const struct msm_baud_map *entry;
+	static const struct msm_baud_map table[] = {
+		{ 1536, 0x00,  1 },
+		{  768, 0x11,  1 },
+		{  384, 0x22,  1 },
+		{  192, 0x33,  1 },
+		{   96, 0x44,  1 },
+		{   48, 0x55,  1 },
+		{   32, 0x66,  1 },
+		{   24, 0x77,  1 },
+		{   16, 0x88,  1 },
+		{   12, 0x99,  6 },
+		{    8, 0xaa,  6 },
+		{    6, 0xbb,  6 },
+		{    4, 0xcc,  6 },
+		{    3, 0xdd,  8 },
+		{    2, 0xee, 16 },
+		{    1, 0xff, 31 },
+	};
+
+	divisor = uart_get_divisor(port, baud);
+
+	for (i = 0, entry = table; i < ARRAY_SIZE(table); i++, entry++)
+		if (entry->divisor <= divisor)
+			break;
+
+	return entry; /* Default to smallest divider */
+}
+
+static int msm_set_baud_rate(struct uart_port *port, unsigned int baud)
+{
+	unsigned int rxstale, watermark;
+	struct msm_port *msm_port = UART_TO_MSM(port);
+	const struct msm_baud_map *entry;
+
+	entry = msm_find_best_baud(port, baud);
+
+	msm_write(port, entry->code, UART_CSR);
+
+	/* RX stale watermark */
+	rxstale = entry->rxstale;
+	watermark = UART_IPR_STALE_LSB & rxstale;
+	watermark |= UART_IPR_RXSTALE_LAST;
+	watermark |= UART_IPR_STALE_TIMEOUT_MSB & (rxstale << 2);
+	msm_write(port, watermark, UART_IPR);
+
+	/* set RX watermark */
+	watermark = (port->fifosize * 3) / 4;
+	msm_write(port, watermark, UART_RFWR);
+
+	/* set TX watermark */
+	msm_write(port, 10, UART_TFWR);
+
+	msm_write(port, UART_CR_CMD_PROTECTION_EN, UART_CR);
+	msm_reset(port);
+
+	/* Enable RX and TX */
+	msm_write(port, UART_CR_TX_ENABLE | UART_CR_RX_ENABLE, UART_CR);
+
+	/* turn on RX and CTS interrupts */
+	msm_port->imr = UART_IMR_RXLEV | UART_IMR_RXSTALE |
+			UART_IMR_CURRENT_CTS | UART_IMR_RXBREAK_START;
+
+	msm_write(port, msm_port->imr, UART_IMR);
+
+	if (msm_port->is_uartdm) {
+		msm_write(port, UART_CR_CMD_RESET_STALE_INT, UART_CR);
+		msm_write(port, 0xFFFFFF, UARTDM_DMRX);
+		msm_write(port, UART_CR_CMD_STALE_EVENT_ENABLE, UART_CR);
+	}
+
+	return baud;
+}
+
+static void msm_init_clock(struct uart_port *port)
+{
+	struct msm_port *msm_port = UART_TO_MSM(port);
+
+	clk_prepare_enable(msm_port->clk);
+	clk_prepare_enable(msm_port->pclk);
+	msm_serial_set_mnd_regs(port);
+}
+
+static int msm_startup(struct uart_port *port)
+{
+	struct msm_port *msm_port = UART_TO_MSM(port);
+	unsigned int data, rfr_level;
+	int ret;
+
+	snprintf(msm_port->name, sizeof(msm_port->name),
+		 "msm_serial%d", port->line);
+
+	ret = request_irq(port->irq, msm_irq, IRQF_TRIGGER_HIGH,
+			  msm_port->name, port);
+	if (unlikely(ret))
+		return ret;
+
+	msm_init_clock(port);
+
+	if (likely(port->fifosize > 12))
+		rfr_level = port->fifosize - 12;
+	else
+		rfr_level = port->fifosize;
+
+	/* set automatic RFR level */
+	data = msm_read(port, UART_MR1);
+	data &= ~UART_MR1_AUTO_RFR_LEVEL1;
+	data &= ~UART_MR1_AUTO_RFR_LEVEL0;
+	data |= UART_MR1_AUTO_RFR_LEVEL1 & (rfr_level << 2);
+	data |= UART_MR1_AUTO_RFR_LEVEL0 & rfr_level;
+	msm_write(port, data, UART_MR1);
+	return 0;
+}
+
+static void msm_shutdown(struct uart_port *port)
+{
+	struct msm_port *msm_port = UART_TO_MSM(port);
+
+	msm_port->imr = 0;
+	msm_write(port, 0, UART_IMR); /* disable interrupts */
+
+	clk_disable_unprepare(msm_port->clk);
+
+	free_irq(port->irq, port);
+}
+
+static void msm_set_termios(struct uart_port *port, struct ktermios *termios,
+			    struct ktermios *old)
+{
+	unsigned long flags;
+	unsigned int baud, mr;
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	/* calculate and set baud rate */
+	baud = uart_get_baud_rate(port, termios, old, 300, 115200);
+	baud = msm_set_baud_rate(port, baud);
+	if (tty_termios_baud_rate(termios))
+		tty_termios_encode_baud_rate(termios, baud, baud);
+
+	/* calculate parity */
+	mr = msm_read(port, UART_MR2);
+	mr &= ~UART_MR2_PARITY_MODE;
+	if (termios->c_cflag & PARENB) {
+		if (termios->c_cflag & PARODD)
+			mr |= UART_MR2_PARITY_MODE_ODD;
+		else if (termios->c_cflag & CMSPAR)
+			mr |= UART_MR2_PARITY_MODE_SPACE;
+		else
+			mr |= UART_MR2_PARITY_MODE_EVEN;
+	}
+
+	/* calculate bits per char */
+	mr &= ~UART_MR2_BITS_PER_CHAR;
+	switch (termios->c_cflag & CSIZE) {
+	case CS5:
+		mr |= UART_MR2_BITS_PER_CHAR_5;
+		break;
+	case CS6:
+		mr |= UART_MR2_BITS_PER_CHAR_6;
+		break;
+	case CS7:
+		mr |= UART_MR2_BITS_PER_CHAR_7;
+		break;
+	case CS8:
+	default:
+		mr |= UART_MR2_BITS_PER_CHAR_8;
+		break;
+	}
+
+	/* calculate stop bits */
+	mr &= ~(UART_MR2_STOP_BIT_LEN_ONE | UART_MR2_STOP_BIT_LEN_TWO);
+	if (termios->c_cflag & CSTOPB)
+		mr |= UART_MR2_STOP_BIT_LEN_TWO;
+	else
+		mr |= UART_MR2_STOP_BIT_LEN_ONE;
+
+	/* set parity, bits per char, and stop bit */
+	msm_write(port, mr, UART_MR2);
+
+	/* calculate and set hardware flow control */
+	mr = msm_read(port, UART_MR1);
+	mr &= ~(UART_MR1_CTS_CTL | UART_MR1_RX_RDY_CTL);
+	if (termios->c_cflag & CRTSCTS) {
+		mr |= UART_MR1_CTS_CTL;
+		mr |= UART_MR1_RX_RDY_CTL;
+	}
+	msm_write(port, mr, UART_MR1);
+
+	/* Configure status bits to ignore based on termio flags. */
+	port->read_status_mask = 0;
+	if (termios->c_iflag & INPCK)
+		port->read_status_mask |= UART_SR_PAR_FRAME_ERR;
+	if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
+		port->read_status_mask |= UART_SR_RX_BREAK;
+
+	uart_update_timeout(port, termios->c_cflag, baud);
+
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *msm_type(struct uart_port *port)
+{
+	return "MSM";
+}
+
+static void msm_release_port(struct uart_port *port)
+{
+	struct platform_device *pdev = to_platform_device(port->dev);
+	struct resource *uart_resource;
+	resource_size_t size;
+
+	uart_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (unlikely(!uart_resource))
+		return;
+	size = resource_size(uart_resource);
+
+	release_mem_region(port->mapbase, size);
+	iounmap(port->membase);
+	port->membase = NULL;
+}
+
+static int msm_request_port(struct uart_port *port)
+{
+	struct platform_device *pdev = to_platform_device(port->dev);
+	struct resource *uart_resource;
+	resource_size_t size;
+	int ret;
+
+	uart_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (unlikely(!uart_resource))
+		return -ENXIO;
+
+	size = resource_size(uart_resource);
+
+	if (!request_mem_region(port->mapbase, size, "msm_serial"))
+		return -EBUSY;
+
+	port->membase = ioremap(port->mapbase, size);
+	if (!port->membase) {
+		ret = -EBUSY;
+		goto fail_release_port;
+	}
+
+	return 0;
+
+fail_release_port:
+	release_mem_region(port->mapbase, size);
+	return ret;
+}
+
+static void msm_config_port(struct uart_port *port, int flags)
+{
+	int ret;
+
+	if (flags & UART_CONFIG_TYPE) {
+		port->type = PORT_MSM;
+		ret = msm_request_port(port);
+		if (ret)
+			return;
+	}
+}
+
+static int msm_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+	if (unlikely(ser->type != PORT_UNKNOWN && ser->type != PORT_MSM))
+		return -EINVAL;
+	if (unlikely(port->irq != ser->irq))
+		return -EINVAL;
+	return 0;
+}
+
+static void msm_power(struct uart_port *port, unsigned int state,
+		      unsigned int oldstate)
+{
+	struct msm_port *msm_port = UART_TO_MSM(port);
+
+	switch (state) {
+	case 0:
+		clk_prepare_enable(msm_port->clk);
+		clk_prepare_enable(msm_port->pclk);
+		break;
+	case 3:
+		clk_disable_unprepare(msm_port->clk);
+		clk_disable_unprepare(msm_port->pclk);
+		break;
+	default:
+		pr_err("msm_serial: Unknown PM state %d\n", state);
+	}
+}
+
+#ifdef CONFIG_CONSOLE_POLL
+static int msm_poll_get_char_single(struct uart_port *port)
+{
+	struct msm_port *msm_port = UART_TO_MSM(port);
+	unsigned int rf_reg = msm_port->is_uartdm ? UARTDM_RF : UART_RF;
+
+	if (!(msm_read(port, UART_SR) & UART_SR_RX_READY))
+		return NO_POLL_CHAR;
+
+	return msm_read(port, rf_reg) & 0xff;
+}
+
+static int msm_poll_get_char_dm(struct uart_port *port)
+{
+	int c;
+	static u32 slop;
+	static int count;
+	unsigned char *sp = (unsigned char *)&slop;
+
+	/* Check if a previous read had more than one char */
+	if (count) {
+		c = sp[sizeof(slop) - count];
+		count--;
+	/* Or if FIFO is empty */
+	} else if (!(msm_read(port, UART_SR) & UART_SR_RX_READY)) {
+		/*
+		 * If RX packing buffer has less than a word, force stale to
+		 * push contents into RX FIFO
+		 */
+		count = msm_read(port, UARTDM_RXFS);
+		count = (count >> UARTDM_RXFS_BUF_SHIFT) & UARTDM_RXFS_BUF_MASK;
+		if (count) {
+			msm_write(port, UART_CR_CMD_FORCE_STALE, UART_CR);
+			slop = msm_read(port, UARTDM_RF);
+			c = sp[0];
+			count--;
+			msm_write(port, UART_CR_CMD_RESET_STALE_INT, UART_CR);
+			msm_write(port, 0xFFFFFF, UARTDM_DMRX);
+			msm_write(port, UART_CR_CMD_STALE_EVENT_ENABLE,
+				  UART_CR);
+		} else {
+			c = NO_POLL_CHAR;
+		}
+	/* FIFO has a word */
+	} else {
+		slop = msm_read(port, UARTDM_RF);
+		c = sp[0];
+		count = sizeof(slop) - 1;
+	}
+
+	return c;
+}
+
+static int msm_poll_get_char(struct uart_port *port)
+{
+	u32 imr;
+	int c;
+	struct msm_port *msm_port = UART_TO_MSM(port);
+
+	/* Disable all interrupts */
+	imr = msm_read(port, UART_IMR);
+	msm_write(port, 0, UART_IMR);
+
+	if (msm_port->is_uartdm)
+		c = msm_poll_get_char_dm(port);
+	else
+		c = msm_poll_get_char_single(port);
+
+	/* Enable interrupts */
+	msm_write(port, imr, UART_IMR);
+
+	return c;
+}
+
+static void msm_poll_put_char(struct uart_port *port, unsigned char c)
+{
+	u32 imr;
+	struct msm_port *msm_port = UART_TO_MSM(port);
+
+	/* Disable all interrupts */
+	imr = msm_read(port, UART_IMR);
+	msm_write(port, 0, UART_IMR);
+
+	if (msm_port->is_uartdm)
+		reset_dm_count(port, 1);
+
+	/* Wait until FIFO is empty */
+	while (!(msm_read(port, UART_SR) & UART_SR_TX_READY))
+		cpu_relax();
+
+	/* Write a character */
+	msm_write(port, c, msm_port->is_uartdm ? UARTDM_TF : UART_TF);
+
+	/* Wait until FIFO is empty */
+	while (!(msm_read(port, UART_SR) & UART_SR_TX_READY))
+		cpu_relax();
+
+	/* Enable interrupts */
+	msm_write(port, imr, UART_IMR);
+}
+#endif
+
+static struct uart_ops msm_uart_pops = {
+	.tx_empty = msm_tx_empty,
+	.set_mctrl = msm_set_mctrl,
+	.get_mctrl = msm_get_mctrl,
+	.stop_tx = msm_stop_tx,
+	.start_tx = msm_start_tx,
+	.stop_rx = msm_stop_rx,
+	.enable_ms = msm_enable_ms,
+	.break_ctl = msm_break_ctl,
+	.startup = msm_startup,
+	.shutdown = msm_shutdown,
+	.set_termios = msm_set_termios,
+	.type = msm_type,
+	.release_port = msm_release_port,
+	.request_port = msm_request_port,
+	.config_port = msm_config_port,
+	.verify_port = msm_verify_port,
+	.pm = msm_power,
+#ifdef CONFIG_CONSOLE_POLL
+	.poll_get_char	= msm_poll_get_char,
+	.poll_put_char	= msm_poll_put_char,
+#endif
+};
+
+static struct msm_port msm_uart_ports[] = {
+	{
+		.uart = {
+			.iotype = UPIO_MEM,
+			.ops = &msm_uart_pops,
+			.flags = UPF_BOOT_AUTOCONF,
+			.fifosize = 64,
+			.line = 0,
+		},
+	},
+	{
+		.uart = {
+			.iotype = UPIO_MEM,
+			.ops = &msm_uart_pops,
+			.flags = UPF_BOOT_AUTOCONF,
+			.fifosize = 64,
+			.line = 1,
+		},
+	},
+	{
+		.uart = {
+			.iotype = UPIO_MEM,
+			.ops = &msm_uart_pops,
+			.flags = UPF_BOOT_AUTOCONF,
+			.fifosize = 64,
+			.line = 2,
+		},
+	},
+};
+
+#define UART_NR	ARRAY_SIZE(msm_uart_ports)
+
+static inline struct uart_port *get_port_from_line(unsigned int line)
+{
+	return &msm_uart_ports[line].uart;
+}
+
+#ifdef CONFIG_SERIAL_MSM_CONSOLE
+static void __msm_console_write(struct uart_port *port, const char *s,
+				unsigned int count, bool is_uartdm)
+{
+	int i;
+	int num_newlines = 0;
+	bool replaced = false;
+	void __iomem *tf;
+
+	if (is_uartdm)
+		tf = port->membase + UARTDM_TF;
+	else
+		tf = port->membase + UART_TF;
+
+	/* Account for newlines that will get a carriage return added */
+	for (i = 0; i < count; i++)
+		if (s[i] == '\n')
+			num_newlines++;
+	count += num_newlines;
+
+	spin_lock(&port->lock);
+	if (is_uartdm)
+		reset_dm_count(port, count);
+
+	i = 0;
+	while (i < count) {
+		int j;
+		unsigned int num_chars;
+		char buf[4] = { 0 };
+
+		if (is_uartdm)
+			num_chars = min(count - i, (unsigned int)sizeof(buf));
+		else
+			num_chars = 1;
+
+		for (j = 0; j < num_chars; j++) {
+			char c = *s;
+
+			if (c == '\n' && !replaced) {
+				buf[j] = '\r';
+				j++;
+				replaced = true;
+			}
+			if (j < num_chars) {
+				buf[j] = c;
+				s++;
+				replaced = false;
+			}
+		}
+
+		while (!(msm_read(port, UART_SR) & UART_SR_TX_READY))
+			cpu_relax();
+
+		iowrite32_rep(tf, buf, 1);
+		i += num_chars;
+	}
+	spin_unlock(&port->lock);
+}
+
+static void msm_console_write(struct console *co, const char *s,
+			      unsigned int count)
+{
+	struct uart_port *port;
+	struct msm_port *msm_port;
+
+	BUG_ON(co->index < 0 || co->index >= UART_NR);
+
+	port = get_port_from_line(co->index);
+	msm_port = UART_TO_MSM(port);
+
+	__msm_console_write(port, s, count, msm_port->is_uartdm);
+}
+
+static int __init msm_console_setup(struct console *co, char *options)
+{
+	struct uart_port *port;
+	int baud = 115200;
+	int bits = 8;
+	int parity = 'n';
+	int flow = 'n';
+
+	if (unlikely(co->index >= UART_NR || co->index < 0))
+		return -ENXIO;
+
+	port = get_port_from_line(co->index);
+
+	if (unlikely(!port->membase))
+		return -ENXIO;
+
+	msm_init_clock(port);
+
+	if (options)
+		uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+	pr_info("msm_serial: console setup on port #%d\n", port->line);
+
+	return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static void
+msm_serial_early_write(struct console *con, const char *s, unsigned n)
+{
+	struct earlycon_device *dev = con->data;
+
+	__msm_console_write(&dev->port, s, n, false);
+}
+
+static int __init
+msm_serial_early_console_setup(struct earlycon_device *device, const char *opt)
+{
+	if (!device->port.membase)
+		return -ENODEV;
+
+	device->con->write = msm_serial_early_write;
+	return 0;
+}
+EARLYCON_DECLARE(msm_serial, msm_serial_early_console_setup);
+OF_EARLYCON_DECLARE(msm_serial, "qcom,msm-uart",
+		    msm_serial_early_console_setup);
+
+static void
+msm_serial_early_write_dm(struct console *con, const char *s, unsigned n)
+{
+	struct earlycon_device *dev = con->data;
+
+	__msm_console_write(&dev->port, s, n, true);
+}
+
+static int __init
+msm_serial_early_console_setup_dm(struct earlycon_device *device,
+				  const char *opt)
+{
+	if (!device->port.membase)
+		return -ENODEV;
+
+	device->con->write = msm_serial_early_write_dm;
+	return 0;
+}
+EARLYCON_DECLARE(msm_serial_dm, msm_serial_early_console_setup_dm);
+OF_EARLYCON_DECLARE(msm_serial_dm, "qcom,msm-uartdm",
+		    msm_serial_early_console_setup_dm);
+
+static struct uart_driver msm_uart_driver;
+
+static struct console msm_console = {
+	.name = "ttyMSM",
+	.write = msm_console_write,
+	.device = uart_console_device,
+	.setup = msm_console_setup,
+	.flags = CON_PRINTBUFFER,
+	.index = -1,
+	.data = &msm_uart_driver,
+};
+
+#define MSM_CONSOLE	(&msm_console)
+
+#else
+#define MSM_CONSOLE	NULL
+#endif
+
+static struct uart_driver msm_uart_driver = {
+	.owner = THIS_MODULE,
+	.driver_name = "msm_serial",
+	.dev_name = "ttyMSM",
+	.nr = UART_NR,
+	.cons = MSM_CONSOLE,
+};
+
+static atomic_t msm_uart_next_id = ATOMIC_INIT(0);
+
+static const struct of_device_id msm_uartdm_table[] = {
+	{ .compatible = "qcom,msm-uartdm-v1.1", .data = (void *)UARTDM_1P1 },
+	{ .compatible = "qcom,msm-uartdm-v1.2", .data = (void *)UARTDM_1P2 },
+	{ .compatible = "qcom,msm-uartdm-v1.3", .data = (void *)UARTDM_1P3 },
+	{ .compatible = "qcom,msm-uartdm-v1.4", .data = (void *)UARTDM_1P4 },
+	{ }
+};
+
+static int msm_serial_probe(struct platform_device *pdev)
+{
+	struct msm_port *msm_port;
+	struct resource *resource;
+	struct uart_port *port;
+	const struct of_device_id *id;
+	int irq, line;
+
+	if (pdev->dev.of_node)
+		line = of_alias_get_id(pdev->dev.of_node, "serial");
+	else
+		line = pdev->id;
+
+	if (line < 0)
+		line = atomic_inc_return(&msm_uart_next_id) - 1;
+
+	if (unlikely(line < 0 || line >= UART_NR))
+		return -ENXIO;
+
+	dev_info(&pdev->dev, "msm_serial: detected port #%d\n", line);
+
+	port = get_port_from_line(line);
+	port->dev = &pdev->dev;
+	msm_port = UART_TO_MSM(port);
+
+	id = of_match_device(msm_uartdm_table, &pdev->dev);
+	if (id)
+		msm_port->is_uartdm = (unsigned long)id->data;
+	else
+		msm_port->is_uartdm = 0;
+
+	msm_port->clk = devm_clk_get(&pdev->dev, "core");
+	if (IS_ERR(msm_port->clk))
+		return PTR_ERR(msm_port->clk);
+
+	if (msm_port->is_uartdm) {
+		msm_port->pclk = devm_clk_get(&pdev->dev, "iface");
+		if (IS_ERR(msm_port->pclk))
+			return PTR_ERR(msm_port->pclk);
+
+		clk_set_rate(msm_port->clk, 1843200);
+	}
+
+	port->uartclk = clk_get_rate(msm_port->clk);
+	dev_info(&pdev->dev, "uartclk = %d\n", port->uartclk);
+
+	resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (unlikely(!resource))
+		return -ENXIO;
+	port->mapbase = resource->start;
+
+	irq = platform_get_irq(pdev, 0);
+	if (unlikely(irq < 0))
+		return -ENXIO;
+	port->irq = irq;
+
+	platform_set_drvdata(pdev, port);
+
+	return uart_add_one_port(&msm_uart_driver, port);
+}
+
+static int msm_serial_remove(struct platform_device *pdev)
+{
+	struct uart_port *port = platform_get_drvdata(pdev);
+
+	uart_remove_one_port(&msm_uart_driver, port);
+
+	return 0;
+}
+
+static const struct of_device_id msm_match_table[] = {
+	{ .compatible = "qcom,msm-uart" },
+	{ .compatible = "qcom,msm-uartdm" },
+	{}
+};
+
+static struct platform_driver msm_platform_driver = {
+	.remove = msm_serial_remove,
+	.probe = msm_serial_probe,
+	.driver = {
+		.name = "msm_serial",
+		.of_match_table = msm_match_table,
+	},
+};
+
+static int __init msm_serial_init(void)
+{
+	int ret;
+
+	ret = uart_register_driver(&msm_uart_driver);
+	if (unlikely(ret))
+		return ret;
+
+	ret = platform_driver_register(&msm_platform_driver);
+	if (unlikely(ret))
+		uart_unregister_driver(&msm_uart_driver);
+
+	pr_info("msm_serial: driver initialized\n");
+
+	return ret;
+}
+
+static void __exit msm_serial_exit(void)
+{
+	platform_driver_unregister(&msm_platform_driver);
+	uart_unregister_driver(&msm_uart_driver);
+}
+
+module_init(msm_serial_init);
+module_exit(msm_serial_exit);
+
+MODULE_AUTHOR("Robert Love <rlove@google.com>");
+MODULE_DESCRIPTION("Driver for msm7x serial device");
+MODULE_LICENSE("GPL");