summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/tty/serial/msm_serial.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/tty/serial/msm_serial.c')
-rw-r--r--kernel/drivers/tty/serial/msm_serial.c1138
1 files changed, 1138 insertions, 0 deletions
diff --git a/kernel/drivers/tty/serial/msm_serial.c b/kernel/drivers/tty/serial/msm_serial.c
new file mode 100644
index 000000000..b73889c8e
--- /dev/null
+++ b/kernel/drivers/tty/serial/msm_serial.c
@@ -0,0 +1,1138 @@
+/*
+ * Driver for msm7k serial device and console
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Robert Love <rlove@google.com>
+ * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#if defined(CONFIG_SERIAL_MSM_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+# define SUPPORT_SYSRQ
+#endif
+
+#include <linux/atomic.h>
+#include <linux/hrtimer.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/irq.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
+#include "msm_serial.h"
+
+enum {
+ UARTDM_1P1 = 1,
+ UARTDM_1P2,
+ UARTDM_1P3,
+ UARTDM_1P4,
+};
+
+struct msm_port {
+ struct uart_port uart;
+ char name[16];
+ struct clk *clk;
+ struct clk *pclk;
+ unsigned int imr;
+ int is_uartdm;
+ unsigned int old_snap_state;
+ bool break_detected;
+};
+
+static inline void wait_for_xmitr(struct uart_port *port)
+{
+ while (!(msm_read(port, UART_SR) & UART_SR_TX_EMPTY)) {
+ if (msm_read(port, UART_ISR) & UART_ISR_TX_READY)
+ break;
+ udelay(1);
+ }
+ msm_write(port, UART_CR_CMD_RESET_TX_READY, UART_CR);
+}
+
+static void msm_stop_tx(struct uart_port *port)
+{
+ struct msm_port *msm_port = UART_TO_MSM(port);
+
+ msm_port->imr &= ~UART_IMR_TXLEV;
+ msm_write(port, msm_port->imr, UART_IMR);
+}
+
+static void msm_start_tx(struct uart_port *port)
+{
+ struct msm_port *msm_port = UART_TO_MSM(port);
+
+ msm_port->imr |= UART_IMR_TXLEV;
+ msm_write(port, msm_port->imr, UART_IMR);
+}
+
+static void msm_stop_rx(struct uart_port *port)
+{
+ struct msm_port *msm_port = UART_TO_MSM(port);
+
+ msm_port->imr &= ~(UART_IMR_RXLEV | UART_IMR_RXSTALE);
+ msm_write(port, msm_port->imr, UART_IMR);
+}
+
+static void msm_enable_ms(struct uart_port *port)
+{
+ struct msm_port *msm_port = UART_TO_MSM(port);
+
+ msm_port->imr |= UART_IMR_DELTA_CTS;
+ msm_write(port, msm_port->imr, UART_IMR);
+}
+
+static void handle_rx_dm(struct uart_port *port, unsigned int misr)
+{
+ struct tty_port *tport = &port->state->port;
+ unsigned int sr;
+ int count = 0;
+ struct msm_port *msm_port = UART_TO_MSM(port);
+
+ if ((msm_read(port, UART_SR) & UART_SR_OVERRUN)) {
+ port->icount.overrun++;
+ tty_insert_flip_char(tport, 0, TTY_OVERRUN);
+ msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR);
+ }
+
+ if (misr & UART_IMR_RXSTALE) {
+ count = msm_read(port, UARTDM_RX_TOTAL_SNAP) -
+ msm_port->old_snap_state;
+ msm_port->old_snap_state = 0;
+ } else {
+ count = 4 * (msm_read(port, UART_RFWR));
+ msm_port->old_snap_state += count;
+ }
+
+ /* TODO: Precise error reporting */
+
+ port->icount.rx += count;
+
+ while (count > 0) {
+ unsigned char buf[4];
+ int sysrq, r_count, i;
+
+ sr = msm_read(port, UART_SR);
+ if ((sr & UART_SR_RX_READY) == 0) {
+ msm_port->old_snap_state -= count;
+ break;
+ }
+
+ ioread32_rep(port->membase + UARTDM_RF, buf, 1);
+ r_count = min_t(int, count, sizeof(buf));
+
+ for (i = 0; i < r_count; i++) {
+ char flag = TTY_NORMAL;
+
+ if (msm_port->break_detected && buf[i] == 0) {
+ port->icount.brk++;
+ flag = TTY_BREAK;
+ msm_port->break_detected = false;
+ if (uart_handle_break(port))
+ continue;
+ }
+
+ if (!(port->read_status_mask & UART_SR_RX_BREAK))
+ flag = TTY_NORMAL;
+
+ spin_unlock(&port->lock);
+ sysrq = uart_handle_sysrq_char(port, buf[i]);
+ spin_lock(&port->lock);
+ if (!sysrq)
+ tty_insert_flip_char(tport, buf[i], flag);
+ }
+ count -= r_count;
+ }
+
+ spin_unlock(&port->lock);
+ tty_flip_buffer_push(tport);
+ spin_lock(&port->lock);
+
+ if (misr & (UART_IMR_RXSTALE))
+ msm_write(port, UART_CR_CMD_RESET_STALE_INT, UART_CR);
+ msm_write(port, 0xFFFFFF, UARTDM_DMRX);
+ msm_write(port, UART_CR_CMD_STALE_EVENT_ENABLE, UART_CR);
+}
+
+static void handle_rx(struct uart_port *port)
+{
+ struct tty_port *tport = &port->state->port;
+ unsigned int sr;
+
+ /*
+ * Handle overrun. My understanding of the hardware is that overrun
+ * is not tied to the RX buffer, so we handle the case out of band.
+ */
+ if ((msm_read(port, UART_SR) & UART_SR_OVERRUN)) {
+ port->icount.overrun++;
+ tty_insert_flip_char(tport, 0, TTY_OVERRUN);
+ msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR);
+ }
+
+ /* and now the main RX loop */
+ while ((sr = msm_read(port, UART_SR)) & UART_SR_RX_READY) {
+ unsigned int c;
+ char flag = TTY_NORMAL;
+ int sysrq;
+
+ c = msm_read(port, UART_RF);
+
+ if (sr & UART_SR_RX_BREAK) {
+ port->icount.brk++;
+ if (uart_handle_break(port))
+ continue;
+ } else if (sr & UART_SR_PAR_FRAME_ERR) {
+ port->icount.frame++;
+ } else {
+ port->icount.rx++;
+ }
+
+ /* Mask conditions we're ignorning. */
+ sr &= port->read_status_mask;
+
+ if (sr & UART_SR_RX_BREAK)
+ flag = TTY_BREAK;
+ else if (sr & UART_SR_PAR_FRAME_ERR)
+ flag = TTY_FRAME;
+
+ spin_unlock(&port->lock);
+ sysrq = uart_handle_sysrq_char(port, c);
+ spin_lock(&port->lock);
+ if (!sysrq)
+ tty_insert_flip_char(tport, c, flag);
+ }
+
+ spin_unlock(&port->lock);
+ tty_flip_buffer_push(tport);
+ spin_lock(&port->lock);
+}
+
+static void reset_dm_count(struct uart_port *port, int count)
+{
+ wait_for_xmitr(port);
+ msm_write(port, count, UARTDM_NCF_TX);
+ msm_read(port, UARTDM_NCF_TX);
+}
+
+static void handle_tx(struct uart_port *port)
+{
+ struct circ_buf *xmit = &port->state->xmit;
+ struct msm_port *msm_port = UART_TO_MSM(port);
+ unsigned int tx_count, num_chars;
+ unsigned int tf_pointer = 0;
+ void __iomem *tf;
+
+ if (msm_port->is_uartdm)
+ tf = port->membase + UARTDM_TF;
+ else
+ tf = port->membase + UART_TF;
+
+ tx_count = uart_circ_chars_pending(xmit);
+ tx_count = min3(tx_count, (unsigned int)UART_XMIT_SIZE - xmit->tail,
+ port->fifosize);
+
+ if (port->x_char) {
+ if (msm_port->is_uartdm)
+ reset_dm_count(port, tx_count + 1);
+
+ iowrite8_rep(tf, &port->x_char, 1);
+ port->icount.tx++;
+ port->x_char = 0;
+ } else if (tx_count && msm_port->is_uartdm) {
+ reset_dm_count(port, tx_count);
+ }
+
+ while (tf_pointer < tx_count) {
+ int i;
+ char buf[4] = { 0 };
+
+ if (!(msm_read(port, UART_SR) & UART_SR_TX_READY))
+ break;
+
+ if (msm_port->is_uartdm)
+ num_chars = min(tx_count - tf_pointer,
+ (unsigned int)sizeof(buf));
+ else
+ num_chars = 1;
+
+ for (i = 0; i < num_chars; i++) {
+ buf[i] = xmit->buf[xmit->tail + i];
+ port->icount.tx++;
+ }
+
+ iowrite32_rep(tf, buf, 1);
+ xmit->tail = (xmit->tail + num_chars) & (UART_XMIT_SIZE - 1);
+ tf_pointer += num_chars;
+ }
+
+ /* disable tx interrupts if nothing more to send */
+ if (uart_circ_empty(xmit))
+ msm_stop_tx(port);
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+}
+
+static void handle_delta_cts(struct uart_port *port)
+{
+ msm_write(port, UART_CR_CMD_RESET_CTS, UART_CR);
+ port->icount.cts++;
+ wake_up_interruptible(&port->state->port.delta_msr_wait);
+}
+
+static irqreturn_t msm_irq(int irq, void *dev_id)
+{
+ struct uart_port *port = dev_id;
+ struct msm_port *msm_port = UART_TO_MSM(port);
+ unsigned int misr;
+
+ spin_lock(&port->lock);
+ misr = msm_read(port, UART_MISR);
+ msm_write(port, 0, UART_IMR); /* disable interrupt */
+
+ if (misr & UART_IMR_RXBREAK_START) {
+ msm_port->break_detected = true;
+ msm_write(port, UART_CR_CMD_RESET_RXBREAK_START, UART_CR);
+ }
+
+ if (misr & (UART_IMR_RXLEV | UART_IMR_RXSTALE)) {
+ if (msm_port->is_uartdm)
+ handle_rx_dm(port, misr);
+ else
+ handle_rx(port);
+ }
+ if (misr & UART_IMR_TXLEV)
+ handle_tx(port);
+ if (misr & UART_IMR_DELTA_CTS)
+ handle_delta_cts(port);
+
+ msm_write(port, msm_port->imr, UART_IMR); /* restore interrupt */
+ spin_unlock(&port->lock);
+
+ return IRQ_HANDLED;
+}
+
+static unsigned int msm_tx_empty(struct uart_port *port)
+{
+ return (msm_read(port, UART_SR) & UART_SR_TX_EMPTY) ? TIOCSER_TEMT : 0;
+}
+
+static unsigned int msm_get_mctrl(struct uart_port *port)
+{
+ return TIOCM_CAR | TIOCM_CTS | TIOCM_DSR | TIOCM_RTS;
+}
+
+static void msm_reset(struct uart_port *port)
+{
+ struct msm_port *msm_port = UART_TO_MSM(port);
+
+ /* reset everything */
+ msm_write(port, UART_CR_CMD_RESET_RX, UART_CR);
+ msm_write(port, UART_CR_CMD_RESET_TX, UART_CR);
+ msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR);
+ msm_write(port, UART_CR_CMD_RESET_BREAK_INT, UART_CR);
+ msm_write(port, UART_CR_CMD_RESET_CTS, UART_CR);
+ msm_write(port, UART_CR_CMD_SET_RFR, UART_CR);
+
+ /* Disable DM modes */
+ if (msm_port->is_uartdm)
+ msm_write(port, 0, UARTDM_DMEN);
+}
+
+static void msm_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ unsigned int mr;
+
+ mr = msm_read(port, UART_MR1);
+
+ if (!(mctrl & TIOCM_RTS)) {
+ mr &= ~UART_MR1_RX_RDY_CTL;
+ msm_write(port, mr, UART_MR1);
+ msm_write(port, UART_CR_CMD_RESET_RFR, UART_CR);
+ } else {
+ mr |= UART_MR1_RX_RDY_CTL;
+ msm_write(port, mr, UART_MR1);
+ }
+}
+
+static void msm_break_ctl(struct uart_port *port, int break_ctl)
+{
+ if (break_ctl)
+ msm_write(port, UART_CR_CMD_START_BREAK, UART_CR);
+ else
+ msm_write(port, UART_CR_CMD_STOP_BREAK, UART_CR);
+}
+
+struct msm_baud_map {
+ u16 divisor;
+ u8 code;
+ u8 rxstale;
+};
+
+static const struct msm_baud_map *
+msm_find_best_baud(struct uart_port *port, unsigned int baud)
+{
+ unsigned int i, divisor;
+ const struct msm_baud_map *entry;
+ static const struct msm_baud_map table[] = {
+ { 1536, 0x00, 1 },
+ { 768, 0x11, 1 },
+ { 384, 0x22, 1 },
+ { 192, 0x33, 1 },
+ { 96, 0x44, 1 },
+ { 48, 0x55, 1 },
+ { 32, 0x66, 1 },
+ { 24, 0x77, 1 },
+ { 16, 0x88, 1 },
+ { 12, 0x99, 6 },
+ { 8, 0xaa, 6 },
+ { 6, 0xbb, 6 },
+ { 4, 0xcc, 6 },
+ { 3, 0xdd, 8 },
+ { 2, 0xee, 16 },
+ { 1, 0xff, 31 },
+ };
+
+ divisor = uart_get_divisor(port, baud);
+
+ for (i = 0, entry = table; i < ARRAY_SIZE(table); i++, entry++)
+ if (entry->divisor <= divisor)
+ break;
+
+ return entry; /* Default to smallest divider */
+}
+
+static int msm_set_baud_rate(struct uart_port *port, unsigned int baud)
+{
+ unsigned int rxstale, watermark;
+ struct msm_port *msm_port = UART_TO_MSM(port);
+ const struct msm_baud_map *entry;
+
+ entry = msm_find_best_baud(port, baud);
+
+ msm_write(port, entry->code, UART_CSR);
+
+ /* RX stale watermark */
+ rxstale = entry->rxstale;
+ watermark = UART_IPR_STALE_LSB & rxstale;
+ watermark |= UART_IPR_RXSTALE_LAST;
+ watermark |= UART_IPR_STALE_TIMEOUT_MSB & (rxstale << 2);
+ msm_write(port, watermark, UART_IPR);
+
+ /* set RX watermark */
+ watermark = (port->fifosize * 3) / 4;
+ msm_write(port, watermark, UART_RFWR);
+
+ /* set TX watermark */
+ msm_write(port, 10, UART_TFWR);
+
+ msm_write(port, UART_CR_CMD_PROTECTION_EN, UART_CR);
+ msm_reset(port);
+
+ /* Enable RX and TX */
+ msm_write(port, UART_CR_TX_ENABLE | UART_CR_RX_ENABLE, UART_CR);
+
+ /* turn on RX and CTS interrupts */
+ msm_port->imr = UART_IMR_RXLEV | UART_IMR_RXSTALE |
+ UART_IMR_CURRENT_CTS | UART_IMR_RXBREAK_START;
+
+ msm_write(port, msm_port->imr, UART_IMR);
+
+ if (msm_port->is_uartdm) {
+ msm_write(port, UART_CR_CMD_RESET_STALE_INT, UART_CR);
+ msm_write(port, 0xFFFFFF, UARTDM_DMRX);
+ msm_write(port, UART_CR_CMD_STALE_EVENT_ENABLE, UART_CR);
+ }
+
+ return baud;
+}
+
+static void msm_init_clock(struct uart_port *port)
+{
+ struct msm_port *msm_port = UART_TO_MSM(port);
+
+ clk_prepare_enable(msm_port->clk);
+ clk_prepare_enable(msm_port->pclk);
+ msm_serial_set_mnd_regs(port);
+}
+
+static int msm_startup(struct uart_port *port)
+{
+ struct msm_port *msm_port = UART_TO_MSM(port);
+ unsigned int data, rfr_level;
+ int ret;
+
+ snprintf(msm_port->name, sizeof(msm_port->name),
+ "msm_serial%d", port->line);
+
+ ret = request_irq(port->irq, msm_irq, IRQF_TRIGGER_HIGH,
+ msm_port->name, port);
+ if (unlikely(ret))
+ return ret;
+
+ msm_init_clock(port);
+
+ if (likely(port->fifosize > 12))
+ rfr_level = port->fifosize - 12;
+ else
+ rfr_level = port->fifosize;
+
+ /* set automatic RFR level */
+ data = msm_read(port, UART_MR1);
+ data &= ~UART_MR1_AUTO_RFR_LEVEL1;
+ data &= ~UART_MR1_AUTO_RFR_LEVEL0;
+ data |= UART_MR1_AUTO_RFR_LEVEL1 & (rfr_level << 2);
+ data |= UART_MR1_AUTO_RFR_LEVEL0 & rfr_level;
+ msm_write(port, data, UART_MR1);
+ return 0;
+}
+
+static void msm_shutdown(struct uart_port *port)
+{
+ struct msm_port *msm_port = UART_TO_MSM(port);
+
+ msm_port->imr = 0;
+ msm_write(port, 0, UART_IMR); /* disable interrupts */
+
+ clk_disable_unprepare(msm_port->clk);
+
+ free_irq(port->irq, port);
+}
+
+static void msm_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
+{
+ unsigned long flags;
+ unsigned int baud, mr;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ /* calculate and set baud rate */
+ baud = uart_get_baud_rate(port, termios, old, 300, 115200);
+ baud = msm_set_baud_rate(port, baud);
+ if (tty_termios_baud_rate(termios))
+ tty_termios_encode_baud_rate(termios, baud, baud);
+
+ /* calculate parity */
+ mr = msm_read(port, UART_MR2);
+ mr &= ~UART_MR2_PARITY_MODE;
+ if (termios->c_cflag & PARENB) {
+ if (termios->c_cflag & PARODD)
+ mr |= UART_MR2_PARITY_MODE_ODD;
+ else if (termios->c_cflag & CMSPAR)
+ mr |= UART_MR2_PARITY_MODE_SPACE;
+ else
+ mr |= UART_MR2_PARITY_MODE_EVEN;
+ }
+
+ /* calculate bits per char */
+ mr &= ~UART_MR2_BITS_PER_CHAR;
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ mr |= UART_MR2_BITS_PER_CHAR_5;
+ break;
+ case CS6:
+ mr |= UART_MR2_BITS_PER_CHAR_6;
+ break;
+ case CS7:
+ mr |= UART_MR2_BITS_PER_CHAR_7;
+ break;
+ case CS8:
+ default:
+ mr |= UART_MR2_BITS_PER_CHAR_8;
+ break;
+ }
+
+ /* calculate stop bits */
+ mr &= ~(UART_MR2_STOP_BIT_LEN_ONE | UART_MR2_STOP_BIT_LEN_TWO);
+ if (termios->c_cflag & CSTOPB)
+ mr |= UART_MR2_STOP_BIT_LEN_TWO;
+ else
+ mr |= UART_MR2_STOP_BIT_LEN_ONE;
+
+ /* set parity, bits per char, and stop bit */
+ msm_write(port, mr, UART_MR2);
+
+ /* calculate and set hardware flow control */
+ mr = msm_read(port, UART_MR1);
+ mr &= ~(UART_MR1_CTS_CTL | UART_MR1_RX_RDY_CTL);
+ if (termios->c_cflag & CRTSCTS) {
+ mr |= UART_MR1_CTS_CTL;
+ mr |= UART_MR1_RX_RDY_CTL;
+ }
+ msm_write(port, mr, UART_MR1);
+
+ /* Configure status bits to ignore based on termio flags. */
+ port->read_status_mask = 0;
+ if (termios->c_iflag & INPCK)
+ port->read_status_mask |= UART_SR_PAR_FRAME_ERR;
+ if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
+ port->read_status_mask |= UART_SR_RX_BREAK;
+
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *msm_type(struct uart_port *port)
+{
+ return "MSM";
+}
+
+static void msm_release_port(struct uart_port *port)
+{
+ struct platform_device *pdev = to_platform_device(port->dev);
+ struct resource *uart_resource;
+ resource_size_t size;
+
+ uart_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (unlikely(!uart_resource))
+ return;
+ size = resource_size(uart_resource);
+
+ release_mem_region(port->mapbase, size);
+ iounmap(port->membase);
+ port->membase = NULL;
+}
+
+static int msm_request_port(struct uart_port *port)
+{
+ struct platform_device *pdev = to_platform_device(port->dev);
+ struct resource *uart_resource;
+ resource_size_t size;
+ int ret;
+
+ uart_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (unlikely(!uart_resource))
+ return -ENXIO;
+
+ size = resource_size(uart_resource);
+
+ if (!request_mem_region(port->mapbase, size, "msm_serial"))
+ return -EBUSY;
+
+ port->membase = ioremap(port->mapbase, size);
+ if (!port->membase) {
+ ret = -EBUSY;
+ goto fail_release_port;
+ }
+
+ return 0;
+
+fail_release_port:
+ release_mem_region(port->mapbase, size);
+ return ret;
+}
+
+static void msm_config_port(struct uart_port *port, int flags)
+{
+ int ret;
+
+ if (flags & UART_CONFIG_TYPE) {
+ port->type = PORT_MSM;
+ ret = msm_request_port(port);
+ if (ret)
+ return;
+ }
+}
+
+static int msm_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ if (unlikely(ser->type != PORT_UNKNOWN && ser->type != PORT_MSM))
+ return -EINVAL;
+ if (unlikely(port->irq != ser->irq))
+ return -EINVAL;
+ return 0;
+}
+
+static void msm_power(struct uart_port *port, unsigned int state,
+ unsigned int oldstate)
+{
+ struct msm_port *msm_port = UART_TO_MSM(port);
+
+ switch (state) {
+ case 0:
+ clk_prepare_enable(msm_port->clk);
+ clk_prepare_enable(msm_port->pclk);
+ break;
+ case 3:
+ clk_disable_unprepare(msm_port->clk);
+ clk_disable_unprepare(msm_port->pclk);
+ break;
+ default:
+ pr_err("msm_serial: Unknown PM state %d\n", state);
+ }
+}
+
+#ifdef CONFIG_CONSOLE_POLL
+static int msm_poll_get_char_single(struct uart_port *port)
+{
+ struct msm_port *msm_port = UART_TO_MSM(port);
+ unsigned int rf_reg = msm_port->is_uartdm ? UARTDM_RF : UART_RF;
+
+ if (!(msm_read(port, UART_SR) & UART_SR_RX_READY))
+ return NO_POLL_CHAR;
+
+ return msm_read(port, rf_reg) & 0xff;
+}
+
+static int msm_poll_get_char_dm(struct uart_port *port)
+{
+ int c;
+ static u32 slop;
+ static int count;
+ unsigned char *sp = (unsigned char *)&slop;
+
+ /* Check if a previous read had more than one char */
+ if (count) {
+ c = sp[sizeof(slop) - count];
+ count--;
+ /* Or if FIFO is empty */
+ } else if (!(msm_read(port, UART_SR) & UART_SR_RX_READY)) {
+ /*
+ * If RX packing buffer has less than a word, force stale to
+ * push contents into RX FIFO
+ */
+ count = msm_read(port, UARTDM_RXFS);
+ count = (count >> UARTDM_RXFS_BUF_SHIFT) & UARTDM_RXFS_BUF_MASK;
+ if (count) {
+ msm_write(port, UART_CR_CMD_FORCE_STALE, UART_CR);
+ slop = msm_read(port, UARTDM_RF);
+ c = sp[0];
+ count--;
+ msm_write(port, UART_CR_CMD_RESET_STALE_INT, UART_CR);
+ msm_write(port, 0xFFFFFF, UARTDM_DMRX);
+ msm_write(port, UART_CR_CMD_STALE_EVENT_ENABLE,
+ UART_CR);
+ } else {
+ c = NO_POLL_CHAR;
+ }
+ /* FIFO has a word */
+ } else {
+ slop = msm_read(port, UARTDM_RF);
+ c = sp[0];
+ count = sizeof(slop) - 1;
+ }
+
+ return c;
+}
+
+static int msm_poll_get_char(struct uart_port *port)
+{
+ u32 imr;
+ int c;
+ struct msm_port *msm_port = UART_TO_MSM(port);
+
+ /* Disable all interrupts */
+ imr = msm_read(port, UART_IMR);
+ msm_write(port, 0, UART_IMR);
+
+ if (msm_port->is_uartdm)
+ c = msm_poll_get_char_dm(port);
+ else
+ c = msm_poll_get_char_single(port);
+
+ /* Enable interrupts */
+ msm_write(port, imr, UART_IMR);
+
+ return c;
+}
+
+static void msm_poll_put_char(struct uart_port *port, unsigned char c)
+{
+ u32 imr;
+ struct msm_port *msm_port = UART_TO_MSM(port);
+
+ /* Disable all interrupts */
+ imr = msm_read(port, UART_IMR);
+ msm_write(port, 0, UART_IMR);
+
+ if (msm_port->is_uartdm)
+ reset_dm_count(port, 1);
+
+ /* Wait until FIFO is empty */
+ while (!(msm_read(port, UART_SR) & UART_SR_TX_READY))
+ cpu_relax();
+
+ /* Write a character */
+ msm_write(port, c, msm_port->is_uartdm ? UARTDM_TF : UART_TF);
+
+ /* Wait until FIFO is empty */
+ while (!(msm_read(port, UART_SR) & UART_SR_TX_READY))
+ cpu_relax();
+
+ /* Enable interrupts */
+ msm_write(port, imr, UART_IMR);
+}
+#endif
+
+static struct uart_ops msm_uart_pops = {
+ .tx_empty = msm_tx_empty,
+ .set_mctrl = msm_set_mctrl,
+ .get_mctrl = msm_get_mctrl,
+ .stop_tx = msm_stop_tx,
+ .start_tx = msm_start_tx,
+ .stop_rx = msm_stop_rx,
+ .enable_ms = msm_enable_ms,
+ .break_ctl = msm_break_ctl,
+ .startup = msm_startup,
+ .shutdown = msm_shutdown,
+ .set_termios = msm_set_termios,
+ .type = msm_type,
+ .release_port = msm_release_port,
+ .request_port = msm_request_port,
+ .config_port = msm_config_port,
+ .verify_port = msm_verify_port,
+ .pm = msm_power,
+#ifdef CONFIG_CONSOLE_POLL
+ .poll_get_char = msm_poll_get_char,
+ .poll_put_char = msm_poll_put_char,
+#endif
+};
+
+static struct msm_port msm_uart_ports[] = {
+ {
+ .uart = {
+ .iotype = UPIO_MEM,
+ .ops = &msm_uart_pops,
+ .flags = UPF_BOOT_AUTOCONF,
+ .fifosize = 64,
+ .line = 0,
+ },
+ },
+ {
+ .uart = {
+ .iotype = UPIO_MEM,
+ .ops = &msm_uart_pops,
+ .flags = UPF_BOOT_AUTOCONF,
+ .fifosize = 64,
+ .line = 1,
+ },
+ },
+ {
+ .uart = {
+ .iotype = UPIO_MEM,
+ .ops = &msm_uart_pops,
+ .flags = UPF_BOOT_AUTOCONF,
+ .fifosize = 64,
+ .line = 2,
+ },
+ },
+};
+
+#define UART_NR ARRAY_SIZE(msm_uart_ports)
+
+static inline struct uart_port *get_port_from_line(unsigned int line)
+{
+ return &msm_uart_ports[line].uart;
+}
+
+#ifdef CONFIG_SERIAL_MSM_CONSOLE
+static void __msm_console_write(struct uart_port *port, const char *s,
+ unsigned int count, bool is_uartdm)
+{
+ int i;
+ int num_newlines = 0;
+ bool replaced = false;
+ void __iomem *tf;
+
+ if (is_uartdm)
+ tf = port->membase + UARTDM_TF;
+ else
+ tf = port->membase + UART_TF;
+
+ /* Account for newlines that will get a carriage return added */
+ for (i = 0; i < count; i++)
+ if (s[i] == '\n')
+ num_newlines++;
+ count += num_newlines;
+
+ spin_lock(&port->lock);
+ if (is_uartdm)
+ reset_dm_count(port, count);
+
+ i = 0;
+ while (i < count) {
+ int j;
+ unsigned int num_chars;
+ char buf[4] = { 0 };
+
+ if (is_uartdm)
+ num_chars = min(count - i, (unsigned int)sizeof(buf));
+ else
+ num_chars = 1;
+
+ for (j = 0; j < num_chars; j++) {
+ char c = *s;
+
+ if (c == '\n' && !replaced) {
+ buf[j] = '\r';
+ j++;
+ replaced = true;
+ }
+ if (j < num_chars) {
+ buf[j] = c;
+ s++;
+ replaced = false;
+ }
+ }
+
+ while (!(msm_read(port, UART_SR) & UART_SR_TX_READY))
+ cpu_relax();
+
+ iowrite32_rep(tf, buf, 1);
+ i += num_chars;
+ }
+ spin_unlock(&port->lock);
+}
+
+static void msm_console_write(struct console *co, const char *s,
+ unsigned int count)
+{
+ struct uart_port *port;
+ struct msm_port *msm_port;
+
+ BUG_ON(co->index < 0 || co->index >= UART_NR);
+
+ port = get_port_from_line(co->index);
+ msm_port = UART_TO_MSM(port);
+
+ __msm_console_write(port, s, count, msm_port->is_uartdm);
+}
+
+static int __init msm_console_setup(struct console *co, char *options)
+{
+ struct uart_port *port;
+ int baud = 115200;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ if (unlikely(co->index >= UART_NR || co->index < 0))
+ return -ENXIO;
+
+ port = get_port_from_line(co->index);
+
+ if (unlikely(!port->membase))
+ return -ENXIO;
+
+ msm_init_clock(port);
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+ pr_info("msm_serial: console setup on port #%d\n", port->line);
+
+ return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static void
+msm_serial_early_write(struct console *con, const char *s, unsigned n)
+{
+ struct earlycon_device *dev = con->data;
+
+ __msm_console_write(&dev->port, s, n, false);
+}
+
+static int __init
+msm_serial_early_console_setup(struct earlycon_device *device, const char *opt)
+{
+ if (!device->port.membase)
+ return -ENODEV;
+
+ device->con->write = msm_serial_early_write;
+ return 0;
+}
+EARLYCON_DECLARE(msm_serial, msm_serial_early_console_setup);
+OF_EARLYCON_DECLARE(msm_serial, "qcom,msm-uart",
+ msm_serial_early_console_setup);
+
+static void
+msm_serial_early_write_dm(struct console *con, const char *s, unsigned n)
+{
+ struct earlycon_device *dev = con->data;
+
+ __msm_console_write(&dev->port, s, n, true);
+}
+
+static int __init
+msm_serial_early_console_setup_dm(struct earlycon_device *device,
+ const char *opt)
+{
+ if (!device->port.membase)
+ return -ENODEV;
+
+ device->con->write = msm_serial_early_write_dm;
+ return 0;
+}
+EARLYCON_DECLARE(msm_serial_dm, msm_serial_early_console_setup_dm);
+OF_EARLYCON_DECLARE(msm_serial_dm, "qcom,msm-uartdm",
+ msm_serial_early_console_setup_dm);
+
+static struct uart_driver msm_uart_driver;
+
+static struct console msm_console = {
+ .name = "ttyMSM",
+ .write = msm_console_write,
+ .device = uart_console_device,
+ .setup = msm_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &msm_uart_driver,
+};
+
+#define MSM_CONSOLE (&msm_console)
+
+#else
+#define MSM_CONSOLE NULL
+#endif
+
+static struct uart_driver msm_uart_driver = {
+ .owner = THIS_MODULE,
+ .driver_name = "msm_serial",
+ .dev_name = "ttyMSM",
+ .nr = UART_NR,
+ .cons = MSM_CONSOLE,
+};
+
+static atomic_t msm_uart_next_id = ATOMIC_INIT(0);
+
+static const struct of_device_id msm_uartdm_table[] = {
+ { .compatible = "qcom,msm-uartdm-v1.1", .data = (void *)UARTDM_1P1 },
+ { .compatible = "qcom,msm-uartdm-v1.2", .data = (void *)UARTDM_1P2 },
+ { .compatible = "qcom,msm-uartdm-v1.3", .data = (void *)UARTDM_1P3 },
+ { .compatible = "qcom,msm-uartdm-v1.4", .data = (void *)UARTDM_1P4 },
+ { }
+};
+
+static int msm_serial_probe(struct platform_device *pdev)
+{
+ struct msm_port *msm_port;
+ struct resource *resource;
+ struct uart_port *port;
+ const struct of_device_id *id;
+ int irq, line;
+
+ if (pdev->dev.of_node)
+ line = of_alias_get_id(pdev->dev.of_node, "serial");
+ else
+ line = pdev->id;
+
+ if (line < 0)
+ line = atomic_inc_return(&msm_uart_next_id) - 1;
+
+ if (unlikely(line < 0 || line >= UART_NR))
+ return -ENXIO;
+
+ dev_info(&pdev->dev, "msm_serial: detected port #%d\n", line);
+
+ port = get_port_from_line(line);
+ port->dev = &pdev->dev;
+ msm_port = UART_TO_MSM(port);
+
+ id = of_match_device(msm_uartdm_table, &pdev->dev);
+ if (id)
+ msm_port->is_uartdm = (unsigned long)id->data;
+ else
+ msm_port->is_uartdm = 0;
+
+ msm_port->clk = devm_clk_get(&pdev->dev, "core");
+ if (IS_ERR(msm_port->clk))
+ return PTR_ERR(msm_port->clk);
+
+ if (msm_port->is_uartdm) {
+ msm_port->pclk = devm_clk_get(&pdev->dev, "iface");
+ if (IS_ERR(msm_port->pclk))
+ return PTR_ERR(msm_port->pclk);
+
+ clk_set_rate(msm_port->clk, 1843200);
+ }
+
+ port->uartclk = clk_get_rate(msm_port->clk);
+ dev_info(&pdev->dev, "uartclk = %d\n", port->uartclk);
+
+ resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (unlikely(!resource))
+ return -ENXIO;
+ port->mapbase = resource->start;
+
+ irq = platform_get_irq(pdev, 0);
+ if (unlikely(irq < 0))
+ return -ENXIO;
+ port->irq = irq;
+
+ platform_set_drvdata(pdev, port);
+
+ return uart_add_one_port(&msm_uart_driver, port);
+}
+
+static int msm_serial_remove(struct platform_device *pdev)
+{
+ struct uart_port *port = platform_get_drvdata(pdev);
+
+ uart_remove_one_port(&msm_uart_driver, port);
+
+ return 0;
+}
+
+static const struct of_device_id msm_match_table[] = {
+ { .compatible = "qcom,msm-uart" },
+ { .compatible = "qcom,msm-uartdm" },
+ {}
+};
+
+static struct platform_driver msm_platform_driver = {
+ .remove = msm_serial_remove,
+ .probe = msm_serial_probe,
+ .driver = {
+ .name = "msm_serial",
+ .of_match_table = msm_match_table,
+ },
+};
+
+static int __init msm_serial_init(void)
+{
+ int ret;
+
+ ret = uart_register_driver(&msm_uart_driver);
+ if (unlikely(ret))
+ return ret;
+
+ ret = platform_driver_register(&msm_platform_driver);
+ if (unlikely(ret))
+ uart_unregister_driver(&msm_uart_driver);
+
+ pr_info("msm_serial: driver initialized\n");
+
+ return ret;
+}
+
+static void __exit msm_serial_exit(void)
+{
+ platform_driver_unregister(&msm_platform_driver);
+ uart_unregister_driver(&msm_uart_driver);
+}
+
+module_init(msm_serial_init);
+module_exit(msm_serial_exit);
+
+MODULE_AUTHOR("Robert Love <rlove@google.com>");
+MODULE_DESCRIPTION("Driver for msm7x serial device");
+MODULE_LICENSE("GPL");