summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/tty/serial/men_z135_uart.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/tty/serial/men_z135_uart.c')
-rw-r--r--kernel/drivers/tty/serial/men_z135_uart.c931
1 files changed, 931 insertions, 0 deletions
diff --git a/kernel/drivers/tty/serial/men_z135_uart.c b/kernel/drivers/tty/serial/men_z135_uart.c
new file mode 100644
index 000000000..35c55505b
--- /dev/null
+++ b/kernel/drivers/tty/serial/men_z135_uart.c
@@ -0,0 +1,931 @@
+/*
+ * MEN 16z135 High Speed UART
+ *
+ * Copyright (C) 2014 MEN Mikroelektronik GmbH (www.men.de)
+ * Author: Johannes Thumshirn <johannes.thumshirn@men.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; version 2 of the License.
+ */
+#define pr_fmt(fmt) KBUILD_MODNAME ":" fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/serial_core.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/tty_flip.h>
+#include <linux/bitops.h>
+#include <linux/mcb.h>
+
+#define MEN_Z135_MAX_PORTS 12
+#define MEN_Z135_BASECLK 29491200
+#define MEN_Z135_FIFO_SIZE 1024
+#define MEN_Z135_FIFO_WATERMARK 1020
+
+#define MEN_Z135_STAT_REG 0x0
+#define MEN_Z135_RX_RAM 0x4
+#define MEN_Z135_TX_RAM 0x400
+#define MEN_Z135_RX_CTRL 0x800
+#define MEN_Z135_TX_CTRL 0x804
+#define MEN_Z135_CONF_REG 0x808
+#define MEN_Z135_UART_FREQ 0x80c
+#define MEN_Z135_BAUD_REG 0x810
+#define MEN_Z135_TIMEOUT 0x814
+
+#define MEN_Z135_MEM_SIZE 0x818
+
+#define IRQ_ID(x) ((x) & 0x1f)
+
+#define MEN_Z135_IER_RXCIEN BIT(0) /* RX Space IRQ */
+#define MEN_Z135_IER_TXCIEN BIT(1) /* TX Space IRQ */
+#define MEN_Z135_IER_RLSIEN BIT(2) /* Receiver Line Status IRQ */
+#define MEN_Z135_IER_MSIEN BIT(3) /* Modem Status IRQ */
+#define MEN_Z135_ALL_IRQS (MEN_Z135_IER_RXCIEN \
+ | MEN_Z135_IER_RLSIEN \
+ | MEN_Z135_IER_MSIEN \
+ | MEN_Z135_IER_TXCIEN)
+
+#define MEN_Z135_MCR_DTR BIT(24)
+#define MEN_Z135_MCR_RTS BIT(25)
+#define MEN_Z135_MCR_OUT1 BIT(26)
+#define MEN_Z135_MCR_OUT2 BIT(27)
+#define MEN_Z135_MCR_LOOP BIT(28)
+#define MEN_Z135_MCR_RCFC BIT(29)
+
+#define MEN_Z135_MSR_DCTS BIT(0)
+#define MEN_Z135_MSR_DDSR BIT(1)
+#define MEN_Z135_MSR_DRI BIT(2)
+#define MEN_Z135_MSR_DDCD BIT(3)
+#define MEN_Z135_MSR_CTS BIT(4)
+#define MEN_Z135_MSR_DSR BIT(5)
+#define MEN_Z135_MSR_RI BIT(6)
+#define MEN_Z135_MSR_DCD BIT(7)
+
+#define MEN_Z135_LCR_SHIFT 8 /* LCR shift mask */
+
+#define MEN_Z135_WL5 0 /* CS5 */
+#define MEN_Z135_WL6 1 /* CS6 */
+#define MEN_Z135_WL7 2 /* CS7 */
+#define MEN_Z135_WL8 3 /* CS8 */
+
+#define MEN_Z135_STB_SHIFT 2 /* Stopbits */
+#define MEN_Z135_NSTB1 0
+#define MEN_Z135_NSTB2 1
+
+#define MEN_Z135_PEN_SHIFT 3 /* Parity enable */
+#define MEN_Z135_PAR_DIS 0
+#define MEN_Z135_PAR_ENA 1
+
+#define MEN_Z135_PTY_SHIFT 4 /* Parity type */
+#define MEN_Z135_PTY_ODD 0
+#define MEN_Z135_PTY_EVN 1
+
+#define MEN_Z135_LSR_DR BIT(0)
+#define MEN_Z135_LSR_OE BIT(1)
+#define MEN_Z135_LSR_PE BIT(2)
+#define MEN_Z135_LSR_FE BIT(3)
+#define MEN_Z135_LSR_BI BIT(4)
+#define MEN_Z135_LSR_THEP BIT(5)
+#define MEN_Z135_LSR_TEXP BIT(6)
+#define MEN_Z135_LSR_RXFIFOERR BIT(7)
+
+#define MEN_Z135_IRQ_ID_RLS BIT(0)
+#define MEN_Z135_IRQ_ID_RDA BIT(1)
+#define MEN_Z135_IRQ_ID_CTI BIT(2)
+#define MEN_Z135_IRQ_ID_TSA BIT(3)
+#define MEN_Z135_IRQ_ID_MST BIT(4)
+
+#define LCR(x) (((x) >> MEN_Z135_LCR_SHIFT) & 0xff)
+
+#define BYTES_TO_ALIGN(x) ((x) & 0x3)
+
+static int line;
+
+static int txlvl = 5;
+module_param(txlvl, int, S_IRUGO);
+MODULE_PARM_DESC(txlvl, "TX IRQ trigger level 0-7, default 5 (128 byte)");
+
+static int rxlvl = 6;
+module_param(rxlvl, int, S_IRUGO);
+MODULE_PARM_DESC(rxlvl, "RX IRQ trigger level 0-7, default 6 (256 byte)");
+
+static int align;
+module_param(align, int, S_IRUGO);
+MODULE_PARM_DESC(align, "Keep hardware FIFO write pointer aligned, default 0");
+
+static uint rx_timeout;
+module_param(rx_timeout, uint, S_IRUGO);
+MODULE_PARM_DESC(rx_timeout, "RX timeout. "
+ "Timeout in seconds = (timeout_reg * baud_reg * 4) / freq_reg");
+
+struct men_z135_port {
+ struct uart_port port;
+ struct mcb_device *mdev;
+ unsigned char *rxbuf;
+ u32 stat_reg;
+ spinlock_t lock;
+ bool automode;
+};
+#define to_men_z135(port) container_of((port), struct men_z135_port, port)
+
+/**
+ * men_z135_reg_set() - Set value in register
+ * @uart: The UART port
+ * @addr: Register address
+ * @val: value to set
+ */
+static inline void men_z135_reg_set(struct men_z135_port *uart,
+ u32 addr, u32 val)
+{
+ struct uart_port *port = &uart->port;
+ unsigned long flags;
+ u32 reg;
+
+ spin_lock_irqsave(&uart->lock, flags);
+
+ reg = ioread32(port->membase + addr);
+ reg |= val;
+ iowrite32(reg, port->membase + addr);
+
+ spin_unlock_irqrestore(&uart->lock, flags);
+}
+
+/**
+ * men_z135_reg_clr() - Unset value in register
+ * @uart: The UART port
+ * @addr: Register address
+ * @val: value to clear
+ */
+static inline void men_z135_reg_clr(struct men_z135_port *uart,
+ u32 addr, u32 val)
+{
+ struct uart_port *port = &uart->port;
+ unsigned long flags;
+ u32 reg;
+
+ spin_lock_irqsave(&uart->lock, flags);
+
+ reg = ioread32(port->membase + addr);
+ reg &= ~val;
+ iowrite32(reg, port->membase + addr);
+
+ spin_unlock_irqrestore(&uart->lock, flags);
+}
+
+/**
+ * men_z135_handle_modem_status() - Handle change of modem status
+ * @port: The UART port
+ *
+ * Handle change of modem status register. This is done by reading the "delta"
+ * versions of DCD (Data Carrier Detect) and CTS (Clear To Send).
+ */
+static void men_z135_handle_modem_status(struct men_z135_port *uart)
+{
+ u8 msr;
+
+ msr = (uart->stat_reg >> 8) & 0xff;
+
+ if (msr & MEN_Z135_MSR_DDCD)
+ uart_handle_dcd_change(&uart->port,
+ msr & MEN_Z135_MSR_DCD);
+ if (msr & MEN_Z135_MSR_DCTS)
+ uart_handle_cts_change(&uart->port,
+ msr & MEN_Z135_MSR_CTS);
+}
+
+static void men_z135_handle_lsr(struct men_z135_port *uart)
+{
+ struct uart_port *port = &uart->port;
+ u8 lsr;
+
+ lsr = (uart->stat_reg >> 16) & 0xff;
+
+ if (lsr & MEN_Z135_LSR_OE)
+ port->icount.overrun++;
+ if (lsr & MEN_Z135_LSR_PE)
+ port->icount.parity++;
+ if (lsr & MEN_Z135_LSR_FE)
+ port->icount.frame++;
+ if (lsr & MEN_Z135_LSR_BI) {
+ port->icount.brk++;
+ uart_handle_break(port);
+ }
+}
+
+/**
+ * get_rx_fifo_content() - Get the number of bytes in RX FIFO
+ * @uart: The UART port
+ *
+ * Read RXC register from hardware and return current FIFO fill size.
+ */
+static u16 get_rx_fifo_content(struct men_z135_port *uart)
+{
+ struct uart_port *port = &uart->port;
+ u32 stat_reg;
+ u16 rxc;
+ u8 rxc_lo;
+ u8 rxc_hi;
+
+ stat_reg = ioread32(port->membase + MEN_Z135_STAT_REG);
+ rxc_lo = stat_reg >> 24;
+ rxc_hi = (stat_reg & 0xC0) >> 6;
+
+ rxc = rxc_lo | (rxc_hi << 8);
+
+ return rxc;
+}
+
+/**
+ * men_z135_handle_rx() - RX tasklet routine
+ * @arg: Pointer to struct men_z135_port
+ *
+ * Copy from RX FIFO and acknowledge number of bytes copied.
+ */
+static void men_z135_handle_rx(struct men_z135_port *uart)
+{
+ struct uart_port *port = &uart->port;
+ struct tty_port *tport = &port->state->port;
+ int copied;
+ u16 size;
+ int room;
+
+ size = get_rx_fifo_content(uart);
+
+ if (size == 0)
+ return;
+
+ /* Avoid accidently accessing TX FIFO instead of RX FIFO. Last
+ * longword in RX FIFO cannot be read.(0x004-0x3FF)
+ */
+ if (size > MEN_Z135_FIFO_WATERMARK)
+ size = MEN_Z135_FIFO_WATERMARK;
+
+ room = tty_buffer_request_room(tport, size);
+ if (room != size)
+ dev_warn(&uart->mdev->dev,
+ "Not enough room in flip buffer, truncating to %d\n",
+ room);
+
+ if (room == 0)
+ return;
+
+ memcpy_fromio(uart->rxbuf, port->membase + MEN_Z135_RX_RAM, room);
+ /* Be sure to first copy all data and then acknowledge it */
+ mb();
+ iowrite32(room, port->membase + MEN_Z135_RX_CTRL);
+
+ copied = tty_insert_flip_string(tport, uart->rxbuf, room);
+ if (copied != room)
+ dev_warn(&uart->mdev->dev,
+ "Only copied %d instead of %d bytes\n",
+ copied, room);
+
+ port->icount.rx += copied;
+
+ tty_flip_buffer_push(tport);
+
+}
+
+/**
+ * men_z135_handle_tx() - TX tasklet routine
+ * @arg: Pointer to struct men_z135_port
+ *
+ */
+static void men_z135_handle_tx(struct men_z135_port *uart)
+{
+ struct uart_port *port = &uart->port;
+ struct circ_buf *xmit = &port->state->xmit;
+ u32 txc;
+ u32 wptr;
+ int qlen;
+ int n;
+ int txfree;
+ int head;
+ int tail;
+ int s;
+
+ if (uart_circ_empty(xmit))
+ goto out;
+
+ if (uart_tx_stopped(port))
+ goto out;
+
+ if (port->x_char)
+ goto out;
+
+ /* calculate bytes to copy */
+ qlen = uart_circ_chars_pending(xmit);
+ if (qlen <= 0)
+ goto out;
+
+ wptr = ioread32(port->membase + MEN_Z135_TX_CTRL);
+ txc = (wptr >> 16) & 0x3ff;
+ wptr &= 0x3ff;
+
+ if (txc > MEN_Z135_FIFO_WATERMARK)
+ txc = MEN_Z135_FIFO_WATERMARK;
+
+ txfree = MEN_Z135_FIFO_WATERMARK - txc;
+ if (txfree <= 0) {
+ dev_err(&uart->mdev->dev,
+ "Not enough room in TX FIFO have %d, need %d\n",
+ txfree, qlen);
+ goto irq_en;
+ }
+
+ /* if we're not aligned, it's better to copy only 1 or 2 bytes and
+ * then the rest.
+ */
+ if (align && qlen >= 3 && BYTES_TO_ALIGN(wptr))
+ n = 4 - BYTES_TO_ALIGN(wptr);
+ else if (qlen > txfree)
+ n = txfree;
+ else
+ n = qlen;
+
+ if (n <= 0)
+ goto irq_en;
+
+ head = xmit->head & (UART_XMIT_SIZE - 1);
+ tail = xmit->tail & (UART_XMIT_SIZE - 1);
+
+ s = ((head >= tail) ? head : UART_XMIT_SIZE) - tail;
+ n = min(n, s);
+
+ memcpy_toio(port->membase + MEN_Z135_TX_RAM, &xmit->buf[xmit->tail], n);
+ xmit->tail = (xmit->tail + n) & (UART_XMIT_SIZE - 1);
+ mmiowb();
+
+ iowrite32(n & 0x3ff, port->membase + MEN_Z135_TX_CTRL);
+
+ port->icount.tx += n;
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+irq_en:
+ if (!uart_circ_empty(xmit))
+ men_z135_reg_set(uart, MEN_Z135_CONF_REG, MEN_Z135_IER_TXCIEN);
+ else
+ men_z135_reg_clr(uart, MEN_Z135_CONF_REG, MEN_Z135_IER_TXCIEN);
+
+out:
+ return;
+
+}
+
+/**
+ * men_z135_intr() - Handle legacy IRQs
+ * @irq: The IRQ number
+ * @data: Pointer to UART port
+ *
+ * Check IIR register to find the cause of the interrupt and handle it.
+ * It is possible that multiple interrupts reason bits are set and reading
+ * the IIR is a destructive read, so we always need to check for all possible
+ * interrupts and handle them.
+ */
+static irqreturn_t men_z135_intr(int irq, void *data)
+{
+ struct men_z135_port *uart = (struct men_z135_port *)data;
+ struct uart_port *port = &uart->port;
+ bool handled = false;
+ unsigned long flags;
+ int irq_id;
+
+ uart->stat_reg = ioread32(port->membase + MEN_Z135_STAT_REG);
+ irq_id = IRQ_ID(uart->stat_reg);
+
+ if (!irq_id)
+ goto out;
+
+ spin_lock_irqsave(&port->lock, flags);
+ /* It's save to write to IIR[7:6] RXC[9:8] */
+ iowrite8(irq_id, port->membase + MEN_Z135_STAT_REG);
+
+ if (irq_id & MEN_Z135_IRQ_ID_RLS) {
+ men_z135_handle_lsr(uart);
+ handled = true;
+ }
+
+ if (irq_id & (MEN_Z135_IRQ_ID_RDA | MEN_Z135_IRQ_ID_CTI)) {
+ if (irq_id & MEN_Z135_IRQ_ID_CTI)
+ dev_dbg(&uart->mdev->dev, "Character Timeout Indication\n");
+ men_z135_handle_rx(uart);
+ handled = true;
+ }
+
+ if (irq_id & MEN_Z135_IRQ_ID_TSA) {
+ men_z135_handle_tx(uart);
+ handled = true;
+ }
+
+ if (irq_id & MEN_Z135_IRQ_ID_MST) {
+ men_z135_handle_modem_status(uart);
+ handled = true;
+ }
+
+ spin_unlock_irqrestore(&port->lock, flags);
+out:
+ return IRQ_RETVAL(handled);
+}
+
+/**
+ * men_z135_request_irq() - Request IRQ for 16z135 core
+ * @uart: z135 private uart port structure
+ *
+ * Request an IRQ for 16z135 to use. First try using MSI, if it fails
+ * fall back to using legacy interrupts.
+ */
+static int men_z135_request_irq(struct men_z135_port *uart)
+{
+ struct device *dev = &uart->mdev->dev;
+ struct uart_port *port = &uart->port;
+ int err = 0;
+
+ err = request_irq(port->irq, men_z135_intr, IRQF_SHARED,
+ "men_z135_intr", uart);
+ if (err)
+ dev_err(dev, "Error %d getting interrupt\n", err);
+
+ return err;
+}
+
+/**
+ * men_z135_tx_empty() - Handle tx_empty call
+ * @port: The UART port
+ *
+ * This function tests whether the TX FIFO and shifter for the port
+ * described by @port is empty.
+ */
+static unsigned int men_z135_tx_empty(struct uart_port *port)
+{
+ u32 wptr;
+ u16 txc;
+
+ wptr = ioread32(port->membase + MEN_Z135_TX_CTRL);
+ txc = (wptr >> 16) & 0x3ff;
+
+ if (txc == 0)
+ return TIOCSER_TEMT;
+ else
+ return 0;
+}
+
+/**
+ * men_z135_set_mctrl() - Set modem control lines
+ * @port: The UART port
+ * @mctrl: The modem control lines
+ *
+ * This function sets the modem control lines for a port described by @port
+ * to the state described by @mctrl
+ */
+static void men_z135_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ u32 old;
+ u32 conf_reg;
+
+ conf_reg = old = ioread32(port->membase + MEN_Z135_CONF_REG);
+ if (mctrl & TIOCM_RTS)
+ conf_reg |= MEN_Z135_MCR_RTS;
+ else
+ conf_reg &= ~MEN_Z135_MCR_RTS;
+
+ if (mctrl & TIOCM_DTR)
+ conf_reg |= MEN_Z135_MCR_DTR;
+ else
+ conf_reg &= ~MEN_Z135_MCR_DTR;
+
+ if (mctrl & TIOCM_OUT1)
+ conf_reg |= MEN_Z135_MCR_OUT1;
+ else
+ conf_reg &= ~MEN_Z135_MCR_OUT1;
+
+ if (mctrl & TIOCM_OUT2)
+ conf_reg |= MEN_Z135_MCR_OUT2;
+ else
+ conf_reg &= ~MEN_Z135_MCR_OUT2;
+
+ if (mctrl & TIOCM_LOOP)
+ conf_reg |= MEN_Z135_MCR_LOOP;
+ else
+ conf_reg &= ~MEN_Z135_MCR_LOOP;
+
+ if (conf_reg != old)
+ iowrite32(conf_reg, port->membase + MEN_Z135_CONF_REG);
+}
+
+/**
+ * men_z135_get_mctrl() - Get modem control lines
+ * @port: The UART port
+ *
+ * Retruns the current state of modem control inputs.
+ */
+static unsigned int men_z135_get_mctrl(struct uart_port *port)
+{
+ unsigned int mctrl = 0;
+ u8 msr;
+
+ msr = ioread8(port->membase + MEN_Z135_STAT_REG + 1);
+
+ if (msr & MEN_Z135_MSR_CTS)
+ mctrl |= TIOCM_CTS;
+ if (msr & MEN_Z135_MSR_DSR)
+ mctrl |= TIOCM_DSR;
+ if (msr & MEN_Z135_MSR_RI)
+ mctrl |= TIOCM_RI;
+ if (msr & MEN_Z135_MSR_DCD)
+ mctrl |= TIOCM_CAR;
+
+ return mctrl;
+}
+
+/**
+ * men_z135_stop_tx() - Stop transmitting characters
+ * @port: The UART port
+ *
+ * Stop transmitting characters. This might be due to CTS line becomming
+ * inactive or the tty layer indicating we want to stop transmission due to
+ * an XOFF character.
+ */
+static void men_z135_stop_tx(struct uart_port *port)
+{
+ struct men_z135_port *uart = to_men_z135(port);
+
+ men_z135_reg_clr(uart, MEN_Z135_CONF_REG, MEN_Z135_IER_TXCIEN);
+}
+
+/*
+ * men_z135_disable_ms() - Disable Modem Status
+ * port: The UART port
+ *
+ * Enable Modem Status IRQ.
+ */
+static void men_z135_disable_ms(struct uart_port *port)
+{
+ struct men_z135_port *uart = to_men_z135(port);
+
+ men_z135_reg_clr(uart, MEN_Z135_CONF_REG, MEN_Z135_IER_MSIEN);
+}
+
+/**
+ * men_z135_start_tx() - Start transmitting characters
+ * @port: The UART port
+ *
+ * Start transmitting character. This actually doesn't transmit anything, but
+ * fires off the TX tasklet.
+ */
+static void men_z135_start_tx(struct uart_port *port)
+{
+ struct men_z135_port *uart = to_men_z135(port);
+
+ if (uart->automode)
+ men_z135_disable_ms(port);
+
+ men_z135_handle_tx(uart);
+}
+
+/**
+ * men_z135_stop_rx() - Stop receiving characters
+ * @port: The UART port
+ *
+ * Stop receiving characters; the port is in the process of being closed.
+ */
+static void men_z135_stop_rx(struct uart_port *port)
+{
+ struct men_z135_port *uart = to_men_z135(port);
+
+ men_z135_reg_clr(uart, MEN_Z135_CONF_REG, MEN_Z135_IER_RXCIEN);
+}
+
+/**
+ * men_z135_enable_ms() - Enable Modem Status
+ * port:
+ *
+ * Enable Modem Status IRQ.
+ */
+static void men_z135_enable_ms(struct uart_port *port)
+{
+ struct men_z135_port *uart = to_men_z135(port);
+
+ men_z135_reg_set(uart, MEN_Z135_CONF_REG, MEN_Z135_IER_MSIEN);
+}
+
+static int men_z135_startup(struct uart_port *port)
+{
+ struct men_z135_port *uart = to_men_z135(port);
+ int err;
+ u32 conf_reg = 0;
+
+ err = men_z135_request_irq(uart);
+ if (err)
+ return -ENODEV;
+
+ conf_reg = ioread32(port->membase + MEN_Z135_CONF_REG);
+
+ /* Activate all but TX space available IRQ */
+ conf_reg |= MEN_Z135_ALL_IRQS & ~MEN_Z135_IER_TXCIEN;
+ conf_reg &= ~(0xff << 16);
+ conf_reg |= (txlvl << 16);
+ conf_reg |= (rxlvl << 20);
+
+ iowrite32(conf_reg, port->membase + MEN_Z135_CONF_REG);
+
+ if (rx_timeout)
+ iowrite32(rx_timeout, port->membase + MEN_Z135_TIMEOUT);
+
+ return 0;
+}
+
+static void men_z135_shutdown(struct uart_port *port)
+{
+ struct men_z135_port *uart = to_men_z135(port);
+ u32 conf_reg = 0;
+
+ conf_reg |= MEN_Z135_ALL_IRQS;
+
+ men_z135_reg_clr(uart, MEN_Z135_CONF_REG, conf_reg);
+
+ free_irq(uart->port.irq, uart);
+}
+
+static void men_z135_set_termios(struct uart_port *port,
+ struct ktermios *termios,
+ struct ktermios *old)
+{
+ struct men_z135_port *uart = to_men_z135(port);
+ unsigned int baud;
+ u32 conf_reg;
+ u32 bd_reg;
+ u32 uart_freq;
+ u8 lcr;
+
+ conf_reg = ioread32(port->membase + MEN_Z135_CONF_REG);
+ lcr = LCR(conf_reg);
+
+ /* byte size */
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ lcr |= MEN_Z135_WL5;
+ break;
+ case CS6:
+ lcr |= MEN_Z135_WL6;
+ break;
+ case CS7:
+ lcr |= MEN_Z135_WL7;
+ break;
+ case CS8:
+ lcr |= MEN_Z135_WL8;
+ break;
+ }
+
+ /* stop bits */
+ if (termios->c_cflag & CSTOPB)
+ lcr |= MEN_Z135_NSTB2 << MEN_Z135_STB_SHIFT;
+
+ /* parity */
+ if (termios->c_cflag & PARENB) {
+ lcr |= MEN_Z135_PAR_ENA << MEN_Z135_PEN_SHIFT;
+
+ if (termios->c_cflag & PARODD)
+ lcr |= MEN_Z135_PTY_ODD << MEN_Z135_PTY_SHIFT;
+ else
+ lcr |= MEN_Z135_PTY_EVN << MEN_Z135_PTY_SHIFT;
+ } else
+ lcr |= MEN_Z135_PAR_DIS << MEN_Z135_PEN_SHIFT;
+
+ conf_reg |= MEN_Z135_IER_MSIEN;
+ if (termios->c_cflag & CRTSCTS) {
+ conf_reg |= MEN_Z135_MCR_RCFC;
+ uart->automode = true;
+ termios->c_cflag &= ~CLOCAL;
+ } else {
+ conf_reg &= ~MEN_Z135_MCR_RCFC;
+ uart->automode = false;
+ }
+
+ termios->c_cflag &= ~CMSPAR; /* Mark/Space parity is not supported */
+
+ conf_reg |= lcr << MEN_Z135_LCR_SHIFT;
+ iowrite32(conf_reg, port->membase + MEN_Z135_CONF_REG);
+
+ uart_freq = ioread32(port->membase + MEN_Z135_UART_FREQ);
+ if (uart_freq == 0)
+ uart_freq = MEN_Z135_BASECLK;
+
+ baud = uart_get_baud_rate(port, termios, old, 0, uart_freq / 16);
+
+ spin_lock(&port->lock);
+ if (tty_termios_baud_rate(termios))
+ tty_termios_encode_baud_rate(termios, baud, baud);
+
+ bd_reg = uart_freq / (4 * baud);
+ iowrite32(bd_reg, port->membase + MEN_Z135_BAUD_REG);
+
+ uart_update_timeout(port, termios->c_cflag, baud);
+ spin_unlock(&port->lock);
+}
+
+static const char *men_z135_type(struct uart_port *port)
+{
+ return KBUILD_MODNAME;
+}
+
+static void men_z135_release_port(struct uart_port *port)
+{
+ iounmap(port->membase);
+ port->membase = NULL;
+
+ release_mem_region(port->mapbase, MEN_Z135_MEM_SIZE);
+}
+
+static int men_z135_request_port(struct uart_port *port)
+{
+ int size = MEN_Z135_MEM_SIZE;
+
+ if (!request_mem_region(port->mapbase, size, "men_z135_port"))
+ return -EBUSY;
+
+ port->membase = ioremap(port->mapbase, MEN_Z135_MEM_SIZE);
+ if (port->membase == NULL) {
+ release_mem_region(port->mapbase, MEN_Z135_MEM_SIZE);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+static void men_z135_config_port(struct uart_port *port, int type)
+{
+ port->type = PORT_MEN_Z135;
+ men_z135_request_port(port);
+}
+
+static int men_z135_verify_port(struct uart_port *port,
+ struct serial_struct *serinfo)
+{
+ return -EINVAL;
+}
+
+static struct uart_ops men_z135_ops = {
+ .tx_empty = men_z135_tx_empty,
+ .set_mctrl = men_z135_set_mctrl,
+ .get_mctrl = men_z135_get_mctrl,
+ .stop_tx = men_z135_stop_tx,
+ .start_tx = men_z135_start_tx,
+ .stop_rx = men_z135_stop_rx,
+ .enable_ms = men_z135_enable_ms,
+ .startup = men_z135_startup,
+ .shutdown = men_z135_shutdown,
+ .set_termios = men_z135_set_termios,
+ .type = men_z135_type,
+ .release_port = men_z135_release_port,
+ .request_port = men_z135_request_port,
+ .config_port = men_z135_config_port,
+ .verify_port = men_z135_verify_port,
+};
+
+static struct uart_driver men_z135_driver = {
+ .owner = THIS_MODULE,
+ .driver_name = KBUILD_MODNAME,
+ .dev_name = "ttyHSU",
+ .major = 0,
+ .minor = 0,
+ .nr = MEN_Z135_MAX_PORTS,
+};
+
+/**
+ * men_z135_probe() - Probe a z135 instance
+ * @mdev: The MCB device
+ * @id: The MCB device ID
+ *
+ * men_z135_probe does the basic setup of hardware resources and registers the
+ * new uart port to the tty layer.
+ */
+static int men_z135_probe(struct mcb_device *mdev,
+ const struct mcb_device_id *id)
+{
+ struct men_z135_port *uart;
+ struct resource *mem;
+ struct device *dev;
+ int err;
+
+ dev = &mdev->dev;
+
+ uart = devm_kzalloc(dev, sizeof(struct men_z135_port), GFP_KERNEL);
+ if (!uart)
+ return -ENOMEM;
+
+ uart->rxbuf = (unsigned char *)__get_free_page(GFP_KERNEL);
+ if (!uart->rxbuf)
+ return -ENOMEM;
+
+ mem = &mdev->mem;
+
+ mcb_set_drvdata(mdev, uart);
+
+ uart->port.uartclk = MEN_Z135_BASECLK * 16;
+ uart->port.fifosize = MEN_Z135_FIFO_SIZE;
+ uart->port.iotype = UPIO_MEM;
+ uart->port.ops = &men_z135_ops;
+ uart->port.irq = mcb_get_irq(mdev);
+ uart->port.iotype = UPIO_MEM;
+ uart->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP;
+ uart->port.line = line++;
+ uart->port.dev = dev;
+ uart->port.type = PORT_MEN_Z135;
+ uart->port.mapbase = mem->start;
+ uart->port.membase = NULL;
+ uart->mdev = mdev;
+
+ spin_lock_init(&uart->port.lock);
+ spin_lock_init(&uart->lock);
+
+ err = uart_add_one_port(&men_z135_driver, &uart->port);
+ if (err)
+ goto err;
+
+ return 0;
+
+err:
+ free_page((unsigned long) uart->rxbuf);
+ dev_err(dev, "Failed to add UART: %d\n", err);
+
+ return err;
+}
+
+/**
+ * men_z135_remove() - Remove a z135 instance from the system
+ *
+ * @mdev: The MCB device
+ */
+static void men_z135_remove(struct mcb_device *mdev)
+{
+ struct men_z135_port *uart = mcb_get_drvdata(mdev);
+
+ line--;
+ uart_remove_one_port(&men_z135_driver, &uart->port);
+ free_page((unsigned long) uart->rxbuf);
+}
+
+static const struct mcb_device_id men_z135_ids[] = {
+ { .device = 0x87 },
+ { }
+};
+MODULE_DEVICE_TABLE(mcb, men_z135_ids);
+
+static struct mcb_driver mcb_driver = {
+ .driver = {
+ .name = "z135-uart",
+ .owner = THIS_MODULE,
+ },
+ .probe = men_z135_probe,
+ .remove = men_z135_remove,
+ .id_table = men_z135_ids,
+};
+
+/**
+ * men_z135_init() - Driver Registration Routine
+ *
+ * men_z135_init is the first routine called when the driver is loaded. All it
+ * does is register with the legacy MEN Chameleon subsystem.
+ */
+static int __init men_z135_init(void)
+{
+ int err;
+
+ err = uart_register_driver(&men_z135_driver);
+ if (err) {
+ pr_err("Failed to register UART: %d\n", err);
+ return err;
+ }
+
+ err = mcb_register_driver(&mcb_driver);
+ if (err) {
+ pr_err("Failed to register MCB driver: %d\n", err);
+ uart_unregister_driver(&men_z135_driver);
+ return err;
+ }
+
+ return 0;
+}
+module_init(men_z135_init);
+
+/**
+ * men_z135_exit() - Driver Exit Routine
+ *
+ * men_z135_exit is called just before the driver is removed from memory.
+ */
+static void __exit men_z135_exit(void)
+{
+ mcb_unregister_driver(&mcb_driver);
+ uart_unregister_driver(&men_z135_driver);
+}
+module_exit(men_z135_exit);
+
+MODULE_AUTHOR("Johannes Thumshirn <johannes.thumshirn@men.de>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("MEN 16z135 High Speed UART");
+MODULE_ALIAS("mcb:16z135");