summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/tty/serial/clps711x.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/tty/serial/clps711x.c')
-rw-r--r--kernel/drivers/tty/serial/clps711x.c580
1 files changed, 580 insertions, 0 deletions
diff --git a/kernel/drivers/tty/serial/clps711x.c b/kernel/drivers/tty/serial/clps711x.c
new file mode 100644
index 000000000..d5d2dd7c7
--- /dev/null
+++ b/kernel/drivers/tty/serial/clps711x.c
@@ -0,0 +1,580 @@
+/*
+ * Driver for CLPS711x serial ports
+ *
+ * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+ *
+ * Copyright 1999 ARM Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#if defined(CONFIG_SERIAL_CLPS711X_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/console.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/ioport.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/clps711x.h>
+
+#include "serial_mctrl_gpio.h"
+
+#define UART_CLPS711X_DEVNAME "ttyCL"
+#define UART_CLPS711X_NR 2
+#define UART_CLPS711X_MAJOR 204
+#define UART_CLPS711X_MINOR 40
+
+#define UARTDR_OFFSET (0x00)
+#define UBRLCR_OFFSET (0x40)
+
+#define UARTDR_FRMERR (1 << 8)
+#define UARTDR_PARERR (1 << 9)
+#define UARTDR_OVERR (1 << 10)
+
+#define UBRLCR_BAUD_MASK ((1 << 12) - 1)
+#define UBRLCR_BREAK (1 << 12)
+#define UBRLCR_PRTEN (1 << 13)
+#define UBRLCR_EVENPRT (1 << 14)
+#define UBRLCR_XSTOP (1 << 15)
+#define UBRLCR_FIFOEN (1 << 16)
+#define UBRLCR_WRDLEN5 (0 << 17)
+#define UBRLCR_WRDLEN6 (1 << 17)
+#define UBRLCR_WRDLEN7 (2 << 17)
+#define UBRLCR_WRDLEN8 (3 << 17)
+#define UBRLCR_WRDLEN_MASK (3 << 17)
+
+struct clps711x_port {
+ struct uart_port port;
+ unsigned int tx_enabled;
+ int rx_irq;
+ struct regmap *syscon;
+ struct mctrl_gpios *gpios;
+};
+
+static struct uart_driver clps711x_uart = {
+ .owner = THIS_MODULE,
+ .driver_name = UART_CLPS711X_DEVNAME,
+ .dev_name = UART_CLPS711X_DEVNAME,
+ .major = UART_CLPS711X_MAJOR,
+ .minor = UART_CLPS711X_MINOR,
+ .nr = UART_CLPS711X_NR,
+};
+
+static void uart_clps711x_stop_tx(struct uart_port *port)
+{
+ struct clps711x_port *s = dev_get_drvdata(port->dev);
+
+ if (s->tx_enabled) {
+ disable_irq(port->irq);
+ s->tx_enabled = 0;
+ }
+}
+
+static void uart_clps711x_start_tx(struct uart_port *port)
+{
+ struct clps711x_port *s = dev_get_drvdata(port->dev);
+
+ if (!s->tx_enabled) {
+ s->tx_enabled = 1;
+ enable_irq(port->irq);
+ }
+}
+
+static irqreturn_t uart_clps711x_int_rx(int irq, void *dev_id)
+{
+ struct uart_port *port = dev_id;
+ struct clps711x_port *s = dev_get_drvdata(port->dev);
+ unsigned int status, flg;
+ u16 ch;
+
+ for (;;) {
+ u32 sysflg = 0;
+
+ regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg);
+ if (sysflg & SYSFLG_URXFE)
+ break;
+
+ ch = readw(port->membase + UARTDR_OFFSET);
+ status = ch & (UARTDR_FRMERR | UARTDR_PARERR | UARTDR_OVERR);
+ ch &= 0xff;
+
+ port->icount.rx++;
+ flg = TTY_NORMAL;
+
+ if (unlikely(status)) {
+ if (status & UARTDR_PARERR)
+ port->icount.parity++;
+ else if (status & UARTDR_FRMERR)
+ port->icount.frame++;
+ else if (status & UARTDR_OVERR)
+ port->icount.overrun++;
+
+ status &= port->read_status_mask;
+
+ if (status & UARTDR_PARERR)
+ flg = TTY_PARITY;
+ else if (status & UARTDR_FRMERR)
+ flg = TTY_FRAME;
+ else if (status & UARTDR_OVERR)
+ flg = TTY_OVERRUN;
+ }
+
+ if (uart_handle_sysrq_char(port, ch))
+ continue;
+
+ if (status & port->ignore_status_mask)
+ continue;
+
+ uart_insert_char(port, status, UARTDR_OVERR, ch, flg);
+ }
+
+ tty_flip_buffer_push(&port->state->port);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t uart_clps711x_int_tx(int irq, void *dev_id)
+{
+ struct uart_port *port = dev_id;
+ struct clps711x_port *s = dev_get_drvdata(port->dev);
+ struct circ_buf *xmit = &port->state->xmit;
+
+ if (port->x_char) {
+ writew(port->x_char, port->membase + UARTDR_OFFSET);
+ port->icount.tx++;
+ port->x_char = 0;
+ return IRQ_HANDLED;
+ }
+
+ if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+ if (s->tx_enabled) {
+ disable_irq_nosync(port->irq);
+ s->tx_enabled = 0;
+ }
+ return IRQ_HANDLED;
+ }
+
+ while (!uart_circ_empty(xmit)) {
+ u32 sysflg = 0;
+
+ writew(xmit->buf[xmit->tail], port->membase + UARTDR_OFFSET);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+
+ regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg);
+ if (sysflg & SYSFLG_UTXFF)
+ break;
+ }
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+ return IRQ_HANDLED;
+}
+
+static unsigned int uart_clps711x_tx_empty(struct uart_port *port)
+{
+ struct clps711x_port *s = dev_get_drvdata(port->dev);
+ u32 sysflg = 0;
+
+ regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg);
+
+ return (sysflg & SYSFLG_UBUSY) ? 0 : TIOCSER_TEMT;
+}
+
+static unsigned int uart_clps711x_get_mctrl(struct uart_port *port)
+{
+ unsigned int result = TIOCM_DSR | TIOCM_CTS | TIOCM_CAR;
+ struct clps711x_port *s = dev_get_drvdata(port->dev);
+
+ return mctrl_gpio_get(s->gpios, &result);
+}
+
+static void uart_clps711x_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ struct clps711x_port *s = dev_get_drvdata(port->dev);
+
+ mctrl_gpio_set(s->gpios, mctrl);
+}
+
+static void uart_clps711x_break_ctl(struct uart_port *port, int break_state)
+{
+ unsigned int ubrlcr;
+
+ ubrlcr = readl(port->membase + UBRLCR_OFFSET);
+ if (break_state)
+ ubrlcr |= UBRLCR_BREAK;
+ else
+ ubrlcr &= ~UBRLCR_BREAK;
+ writel(ubrlcr, port->membase + UBRLCR_OFFSET);
+}
+
+static void uart_clps711x_set_ldisc(struct uart_port *port,
+ struct ktermios *termios)
+{
+ if (!port->line) {
+ struct clps711x_port *s = dev_get_drvdata(port->dev);
+
+ regmap_update_bits(s->syscon, SYSCON_OFFSET, SYSCON1_SIREN,
+ (termios->c_line == N_IRDA) ? SYSCON1_SIREN : 0);
+ }
+}
+
+static int uart_clps711x_startup(struct uart_port *port)
+{
+ struct clps711x_port *s = dev_get_drvdata(port->dev);
+
+ /* Disable break */
+ writel(readl(port->membase + UBRLCR_OFFSET) & ~UBRLCR_BREAK,
+ port->membase + UBRLCR_OFFSET);
+
+ /* Enable the port */
+ return regmap_update_bits(s->syscon, SYSCON_OFFSET,
+ SYSCON_UARTEN, SYSCON_UARTEN);
+}
+
+static void uart_clps711x_shutdown(struct uart_port *port)
+{
+ struct clps711x_port *s = dev_get_drvdata(port->dev);
+
+ /* Disable the port */
+ regmap_update_bits(s->syscon, SYSCON_OFFSET, SYSCON_UARTEN, 0);
+}
+
+static void uart_clps711x_set_termios(struct uart_port *port,
+ struct ktermios *termios,
+ struct ktermios *old)
+{
+ u32 ubrlcr;
+ unsigned int baud, quot;
+
+ /* Mask termios capabilities we don't support */
+ termios->c_cflag &= ~CMSPAR;
+ termios->c_iflag &= ~(BRKINT | IGNBRK);
+
+ /* Ask the core to calculate the divisor for us */
+ baud = uart_get_baud_rate(port, termios, old, port->uartclk / 4096,
+ port->uartclk / 16);
+ quot = uart_get_divisor(port, baud);
+
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ ubrlcr = UBRLCR_WRDLEN5;
+ break;
+ case CS6:
+ ubrlcr = UBRLCR_WRDLEN6;
+ break;
+ case CS7:
+ ubrlcr = UBRLCR_WRDLEN7;
+ break;
+ case CS8:
+ default:
+ ubrlcr = UBRLCR_WRDLEN8;
+ break;
+ }
+
+ if (termios->c_cflag & CSTOPB)
+ ubrlcr |= UBRLCR_XSTOP;
+
+ if (termios->c_cflag & PARENB) {
+ ubrlcr |= UBRLCR_PRTEN;
+ if (!(termios->c_cflag & PARODD))
+ ubrlcr |= UBRLCR_EVENPRT;
+ }
+
+ /* Enable FIFO */
+ ubrlcr |= UBRLCR_FIFOEN;
+
+ /* Set read status mask */
+ port->read_status_mask = UARTDR_OVERR;
+ if (termios->c_iflag & INPCK)
+ port->read_status_mask |= UARTDR_PARERR | UARTDR_FRMERR;
+
+ /* Set status ignore mask */
+ port->ignore_status_mask = 0;
+ if (!(termios->c_cflag & CREAD))
+ port->ignore_status_mask |= UARTDR_OVERR | UARTDR_PARERR |
+ UARTDR_FRMERR;
+
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ writel(ubrlcr | (quot - 1), port->membase + UBRLCR_OFFSET);
+}
+
+static const char *uart_clps711x_type(struct uart_port *port)
+{
+ return (port->type == PORT_CLPS711X) ? "CLPS711X" : NULL;
+}
+
+static void uart_clps711x_config_port(struct uart_port *port, int flags)
+{
+ if (flags & UART_CONFIG_TYPE)
+ port->type = PORT_CLPS711X;
+}
+
+static void uart_clps711x_nop_void(struct uart_port *port)
+{
+}
+
+static int uart_clps711x_nop_int(struct uart_port *port)
+{
+ return 0;
+}
+
+static const struct uart_ops uart_clps711x_ops = {
+ .tx_empty = uart_clps711x_tx_empty,
+ .set_mctrl = uart_clps711x_set_mctrl,
+ .get_mctrl = uart_clps711x_get_mctrl,
+ .stop_tx = uart_clps711x_stop_tx,
+ .start_tx = uart_clps711x_start_tx,
+ .stop_rx = uart_clps711x_nop_void,
+ .break_ctl = uart_clps711x_break_ctl,
+ .set_ldisc = uart_clps711x_set_ldisc,
+ .startup = uart_clps711x_startup,
+ .shutdown = uart_clps711x_shutdown,
+ .set_termios = uart_clps711x_set_termios,
+ .type = uart_clps711x_type,
+ .config_port = uart_clps711x_config_port,
+ .release_port = uart_clps711x_nop_void,
+ .request_port = uart_clps711x_nop_int,
+};
+
+#ifdef CONFIG_SERIAL_CLPS711X_CONSOLE
+static void uart_clps711x_console_putchar(struct uart_port *port, int ch)
+{
+ struct clps711x_port *s = dev_get_drvdata(port->dev);
+ u32 sysflg = 0;
+
+ /* Wait for FIFO is not full */
+ do {
+ regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg);
+ } while (sysflg & SYSFLG_UTXFF);
+
+ writew(ch, port->membase + UARTDR_OFFSET);
+}
+
+static void uart_clps711x_console_write(struct console *co, const char *c,
+ unsigned n)
+{
+ struct uart_port *port = clps711x_uart.state[co->index].uart_port;
+ struct clps711x_port *s = dev_get_drvdata(port->dev);
+ u32 sysflg = 0;
+
+ uart_console_write(port, c, n, uart_clps711x_console_putchar);
+
+ /* Wait for transmitter to become empty */
+ do {
+ regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg);
+ } while (sysflg & SYSFLG_UBUSY);
+}
+
+static int uart_clps711x_console_setup(struct console *co, char *options)
+{
+ int baud = 38400, bits = 8, parity = 'n', flow = 'n';
+ int ret, index = co->index;
+ struct clps711x_port *s;
+ struct uart_port *port;
+ unsigned int quot;
+ u32 ubrlcr;
+
+ if (index < 0 || index >= UART_CLPS711X_NR)
+ return -EINVAL;
+
+ port = clps711x_uart.state[index].uart_port;
+ if (!port)
+ return -ENODEV;
+
+ s = dev_get_drvdata(port->dev);
+
+ if (!options) {
+ u32 syscon = 0;
+
+ regmap_read(s->syscon, SYSCON_OFFSET, &syscon);
+ if (syscon & SYSCON_UARTEN) {
+ ubrlcr = readl(port->membase + UBRLCR_OFFSET);
+
+ if (ubrlcr & UBRLCR_PRTEN) {
+ if (ubrlcr & UBRLCR_EVENPRT)
+ parity = 'e';
+ else
+ parity = 'o';
+ }
+
+ if ((ubrlcr & UBRLCR_WRDLEN_MASK) == UBRLCR_WRDLEN7)
+ bits = 7;
+
+ quot = ubrlcr & UBRLCR_BAUD_MASK;
+ baud = port->uartclk / (16 * (quot + 1));
+ }
+ } else
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+ ret = uart_set_options(port, co, baud, parity, bits, flow);
+ if (ret)
+ return ret;
+
+ return regmap_update_bits(s->syscon, SYSCON_OFFSET,
+ SYSCON_UARTEN, SYSCON_UARTEN);
+}
+
+static struct console clps711x_console = {
+ .name = UART_CLPS711X_DEVNAME,
+ .device = uart_console_device,
+ .write = uart_clps711x_console_write,
+ .setup = uart_clps711x_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+};
+#endif
+
+static int uart_clps711x_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ int ret, index = np ? of_alias_get_id(np, "serial") : pdev->id;
+ struct clps711x_port *s;
+ struct resource *res;
+ struct clk *uart_clk;
+
+ if (index < 0 || index >= UART_CLPS711X_NR)
+ return -EINVAL;
+
+ s = devm_kzalloc(&pdev->dev, sizeof(*s), GFP_KERNEL);
+ if (!s)
+ return -ENOMEM;
+
+ uart_clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(uart_clk))
+ return PTR_ERR(uart_clk);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ s->port.membase = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(s->port.membase))
+ return PTR_ERR(s->port.membase);
+
+ s->port.irq = platform_get_irq(pdev, 0);
+ if (IS_ERR_VALUE(s->port.irq))
+ return s->port.irq;
+
+ s->rx_irq = platform_get_irq(pdev, 1);
+ if (IS_ERR_VALUE(s->rx_irq))
+ return s->rx_irq;
+
+ if (!np) {
+ char syscon_name[9];
+
+ sprintf(syscon_name, "syscon.%i", index + 1);
+ s->syscon = syscon_regmap_lookup_by_pdevname(syscon_name);
+ if (IS_ERR(s->syscon))
+ return PTR_ERR(s->syscon);
+ } else {
+ s->syscon = syscon_regmap_lookup_by_phandle(np, "syscon");
+ if (IS_ERR(s->syscon))
+ return PTR_ERR(s->syscon);
+ }
+
+ s->port.line = index;
+ s->port.dev = &pdev->dev;
+ s->port.iotype = UPIO_MEM32;
+ s->port.mapbase = res->start;
+ s->port.type = PORT_CLPS711X;
+ s->port.fifosize = 16;
+ s->port.flags = UPF_SKIP_TEST | UPF_FIXED_TYPE;
+ s->port.uartclk = clk_get_rate(uart_clk);
+ s->port.ops = &uart_clps711x_ops;
+
+ platform_set_drvdata(pdev, s);
+
+ s->gpios = mctrl_gpio_init(&pdev->dev, 0);
+ if (IS_ERR(s->gpios))
+ return PTR_ERR(s->gpios);
+
+ ret = uart_add_one_port(&clps711x_uart, &s->port);
+ if (ret)
+ return ret;
+
+ /* Disable port */
+ if (!uart_console(&s->port))
+ regmap_update_bits(s->syscon, SYSCON_OFFSET, SYSCON_UARTEN, 0);
+
+ s->tx_enabled = 1;
+
+ ret = devm_request_irq(&pdev->dev, s->port.irq, uart_clps711x_int_tx, 0,
+ dev_name(&pdev->dev), &s->port);
+ if (ret) {
+ uart_remove_one_port(&clps711x_uart, &s->port);
+ return ret;
+ }
+
+ ret = devm_request_irq(&pdev->dev, s->rx_irq, uart_clps711x_int_rx, 0,
+ dev_name(&pdev->dev), &s->port);
+ if (ret)
+ uart_remove_one_port(&clps711x_uart, &s->port);
+
+ return ret;
+}
+
+static int uart_clps711x_remove(struct platform_device *pdev)
+{
+ struct clps711x_port *s = platform_get_drvdata(pdev);
+
+ return uart_remove_one_port(&clps711x_uart, &s->port);
+}
+
+static const struct of_device_id __maybe_unused clps711x_uart_dt_ids[] = {
+ { .compatible = "cirrus,clps711x-uart", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, clps711x_uart_dt_ids);
+
+static struct platform_driver clps711x_uart_platform = {
+ .driver = {
+ .name = "clps711x-uart",
+ .of_match_table = of_match_ptr(clps711x_uart_dt_ids),
+ },
+ .probe = uart_clps711x_probe,
+ .remove = uart_clps711x_remove,
+};
+
+static int __init uart_clps711x_init(void)
+{
+ int ret;
+
+#ifdef CONFIG_SERIAL_CLPS711X_CONSOLE
+ clps711x_uart.cons = &clps711x_console;
+ clps711x_console.data = &clps711x_uart;
+#endif
+
+ ret = uart_register_driver(&clps711x_uart);
+ if (ret)
+ return ret;
+
+ return platform_driver_register(&clps711x_uart_platform);
+}
+module_init(uart_clps711x_init);
+
+static void __exit uart_clps711x_exit(void)
+{
+ platform_driver_unregister(&clps711x_uart_platform);
+ uart_unregister_driver(&clps711x_uart);
+}
+module_exit(uart_clps711x_exit);
+
+MODULE_AUTHOR("Deep Blue Solutions Ltd");
+MODULE_DESCRIPTION("CLPS711X serial driver");
+MODULE_LICENSE("GPL");