summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/tty/serial/8250/8250_omap.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/tty/serial/8250/8250_omap.c')
-rw-r--r--kernel/drivers/tty/serial/8250/8250_omap.c276
1 files changed, 166 insertions, 110 deletions
diff --git a/kernel/drivers/tty/serial/8250/8250_omap.c b/kernel/drivers/tty/serial/8250/8250_omap.c
index dce1a2370..a2c0734c7 100644
--- a/kernel/drivers/tty/serial/8250/8250_omap.c
+++ b/kernel/drivers/tty/serial/8250/8250_omap.c
@@ -16,12 +16,14 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/of_gpio.h>
#include <linux/of_irq.h>
#include <linux/delay.h>
#include <linux/pm_runtime.h>
#include <linux/console.h>
#include <linux/pm_qos.h>
+#include <linux/pm_wakeirq.h>
#include <linux/dma-mapping.h>
#include "8250.h"
@@ -31,6 +33,11 @@
#define UART_ERRATA_i202_MDR1_ACCESS (1 << 0)
#define OMAP_UART_WER_HAS_TX_WAKEUP (1 << 1)
#define OMAP_DMA_TX_KICK (1 << 2)
+/*
+ * See Advisory 21 in AM437x errata SPRZ408B, updated April 2015.
+ * The same errata is applicable to AM335x and DRA7x processors too.
+ */
+#define UART_ERRATA_CLOCK_DISABLE (1 << 3)
#define OMAP_UART_FCR_RX_TRIG 6
#define OMAP_UART_FCR_TX_TRIG 4
@@ -52,6 +59,12 @@
#define OMAP_UART_MVR_MAJ_SHIFT 8
#define OMAP_UART_MVR_MIN_MASK 0x3f
+/* SYSC register bitmasks */
+#define OMAP_UART_SYSC_SOFTRESET (1 << 1)
+
+/* SYSS register bitmasks */
+#define OMAP_UART_SYSS_RESETDONE (1 << 0)
+
#define UART_TI752_TLR_TX 0
#define UART_TI752_TLR_RX 4
@@ -98,6 +111,8 @@ struct omap8250_priv {
struct pm_qos_request pm_qos_request;
struct work_struct qos_work;
struct uart_8250_dma omap8250_dma;
+ spinlock_t rx_dma_lock;
+ bool rx_dma_broken;
};
static u32 uart_read(struct uart_8250_port *up, u32 reg)
@@ -230,6 +245,15 @@ static void omap8250_update_scr(struct uart_8250_port *up,
serial_out(up, UART_OMAP_SCR, priv->scr);
}
+static void omap8250_update_mdr1(struct uart_8250_port *up,
+ struct omap8250_priv *priv)
+{
+ if (priv->habit & UART_ERRATA_i202_MDR1_ACCESS)
+ omap_8250_mdr1_errataset(up, priv);
+ else
+ serial_out(up, UART_OMAP_MDR1, priv->mdr1);
+}
+
static void omap8250_restore_regs(struct uart_8250_port *up)
{
struct omap8250_priv *priv = up->port.private_data;
@@ -280,11 +304,9 @@ static void omap8250_restore_regs(struct uart_8250_port *up)
serial_out(up, UART_XOFF1, priv->xoff);
serial_out(up, UART_LCR, up->lcr);
- /* need mode A for FCR */
- if (priv->habit & UART_ERRATA_i202_MDR1_ACCESS)
- omap_8250_mdr1_errataset(up, priv);
- else
- serial_out(up, UART_OMAP_MDR1, priv->mdr1);
+
+ omap8250_update_mdr1(up, priv);
+
up->port.ops->set_mctrl(&up->port, up->port.mctrl);
}
@@ -417,7 +439,6 @@ static void omap_8250_set_termios(struct uart_port *port,
priv->xoff = termios->c_cc[VSTOP];
priv->efr = 0;
- up->mcr &= ~(UART_MCR_RTS | UART_MCR_XONANY);
up->port.status &= ~(UPSTAT_AUTOCTS | UPSTAT_AUTORTS | UPSTAT_AUTOXOFF);
if (termios->c_cflag & CRTSCTS && up->port.flags & UPF_HARD_FLOW) {
@@ -426,12 +447,9 @@ static void omap_8250_set_termios(struct uart_port *port,
priv->efr |= UART_EFR_CTS;
} else if (up->port.flags & UPF_SOFT_FLOW) {
/*
- * IXON Flag:
- * Enable XON/XOFF flow control on input.
- * Receiver compares XON1, XOFF1.
+ * OMAP rx s/w flow control is borked; the transmitter remains
+ * stuck off even if rx flow control is subsequently disabled
*/
- if (termios->c_iflag & IXON)
- priv->efr |= OMAP_UART_SW_RX;
/*
* IXOFF Flag:
@@ -442,15 +460,6 @@ static void omap_8250_set_termios(struct uart_port *port,
up->port.status |= UPSTAT_AUTOXOFF;
priv->efr |= OMAP_UART_SW_TX;
}
-
- /*
- * IXANY Flag:
- * Enable any character to restart output.
- * Operation resumes after receiving any
- * character after recognition of the XOFF character
- */
- if (termios->c_iflag & IXANY)
- up->mcr |= UART_MCR_XONANY;
}
omap8250_restore_regs(up);
@@ -528,14 +537,14 @@ static void omap_serial_fill_features_erratas(struct uart_8250_port *up,
switch (revision) {
case OMAP_UART_REV_46:
- priv->habit = UART_ERRATA_i202_MDR1_ACCESS;
+ priv->habit |= UART_ERRATA_i202_MDR1_ACCESS;
break;
case OMAP_UART_REV_52:
- priv->habit = UART_ERRATA_i202_MDR1_ACCESS |
+ priv->habit |= UART_ERRATA_i202_MDR1_ACCESS |
OMAP_UART_WER_HAS_TX_WAKEUP;
break;
case OMAP_UART_REV_63:
- priv->habit = UART_ERRATA_i202_MDR1_ACCESS |
+ priv->habit |= UART_ERRATA_i202_MDR1_ACCESS |
OMAP_UART_WER_HAS_TX_WAKEUP;
break;
default:
@@ -551,17 +560,6 @@ static void omap8250_uart_qos_work(struct work_struct *work)
pm_qos_update_request(&priv->pm_qos_request, priv->latency);
}
-static irqreturn_t omap_wake_irq(int irq, void *dev_id)
-{
- struct uart_port *port = dev_id;
- int ret;
-
- ret = port->handle_irq(port);
- if (ret)
- return IRQ_HANDLED;
- return IRQ_NONE;
-}
-
#ifdef CONFIG_SERIAL_8250_DMA
static int omap_8250_dma_handle_irq(struct uart_port *port);
#endif
@@ -595,11 +593,9 @@ static int omap_8250_startup(struct uart_port *port)
int ret;
if (priv->wakeirq) {
- ret = request_irq(priv->wakeirq, omap_wake_irq,
- port->irqflags, "uart wakeup irq", port);
+ ret = dev_pm_set_dedicated_wake_irq(port->dev, priv->wakeirq);
if (ret)
return ret;
- disable_irq(priv->wakeirq);
}
pm_runtime_get_sync(port->dev);
@@ -648,8 +644,7 @@ static int omap_8250_startup(struct uart_port *port)
err:
pm_runtime_mark_last_busy(port->dev);
pm_runtime_put_autosuspend(port->dev);
- if (priv->wakeirq)
- free_irq(priv->wakeirq, port);
+ dev_pm_clear_wake_irq(port->dev);
return ret;
}
@@ -681,10 +676,8 @@ static void omap_8250_shutdown(struct uart_port *port)
pm_runtime_mark_last_busy(port->dev);
pm_runtime_put_autosuspend(port->dev);
-
free_irq(port->irq, port);
- if (priv->wakeirq)
- free_irq(priv->wakeirq, port);
+ dev_pm_clear_wake_irq(port->dev);
}
static void omap_8250_throttle(struct uart_port *port)
@@ -726,22 +719,35 @@ static int omap_8250_rx_dma(struct uart_8250_port *p, unsigned int iir);
static void __dma_rx_do_complete(struct uart_8250_port *p, bool error)
{
+ struct omap8250_priv *priv = p->port.private_data;
struct uart_8250_dma *dma = p->dma;
struct tty_port *tty_port = &p->port.state->port;
struct dma_tx_state state;
int count;
+ unsigned long flags;
+ int ret;
dma_sync_single_for_cpu(dma->rxchan->device->dev, dma->rx_addr,
dma->rx_size, DMA_FROM_DEVICE);
+ spin_lock_irqsave(&priv->rx_dma_lock, flags);
+
+ if (!dma->rx_running)
+ goto unlock;
+
dma->rx_running = 0;
dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state);
dmaengine_terminate_all(dma->rxchan);
count = dma->rx_size - state.residue;
- tty_insert_flip_string(tty_port, dma->rx_buf, count);
- p->port.icount.rx += count;
+ ret = tty_insert_flip_string(tty_port, dma->rx_buf, count);
+
+ p->port.icount.rx += ret;
+ p->port.icount.buf_overrun += count - ret;
+unlock:
+ spin_unlock_irqrestore(&priv->rx_dma_lock, flags);
+
if (!error)
omap_8250_rx_dma(p, 0);
@@ -753,28 +759,48 @@ static void __dma_rx_complete(void *param)
__dma_rx_do_complete(param, false);
}
+static void omap_8250_rx_dma_flush(struct uart_8250_port *p)
+{
+ struct omap8250_priv *priv = p->port.private_data;
+ struct uart_8250_dma *dma = p->dma;
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&priv->rx_dma_lock, flags);
+
+ if (!dma->rx_running) {
+ spin_unlock_irqrestore(&priv->rx_dma_lock, flags);
+ return;
+ }
+
+ ret = dmaengine_pause(dma->rxchan);
+ if (WARN_ON_ONCE(ret))
+ priv->rx_dma_broken = true;
+
+ spin_unlock_irqrestore(&priv->rx_dma_lock, flags);
+
+ __dma_rx_do_complete(p, true);
+}
+
static int omap_8250_rx_dma(struct uart_8250_port *p, unsigned int iir)
{
+ struct omap8250_priv *priv = p->port.private_data;
struct uart_8250_dma *dma = p->dma;
+ int err = 0;
struct dma_async_tx_descriptor *desc;
+ unsigned long flags;
switch (iir & 0x3f) {
case UART_IIR_RLSI:
/* 8250_core handles errors and break interrupts */
- if (dma->rx_running) {
- dmaengine_pause(dma->rxchan);
- __dma_rx_do_complete(p, true);
- }
+ omap_8250_rx_dma_flush(p);
return -EIO;
case UART_IIR_RX_TIMEOUT:
/*
* If RCVR FIFO trigger level was not reached, complete the
* transfer and let 8250_core copy the remaining data.
*/
- if (dma->rx_running) {
- dmaengine_pause(dma->rxchan);
- __dma_rx_do_complete(p, true);
- }
+ omap_8250_rx_dma_flush(p);
return -ETIMEDOUT;
case UART_IIR_RDI:
/*
@@ -786,24 +812,28 @@ static int omap_8250_rx_dma(struct uart_8250_port *p, unsigned int iir)
* the DMA won't do anything soon so we have to cancel the DMA
* transfer and purge the FIFO manually.
*/
- if (dma->rx_running) {
- dmaengine_pause(dma->rxchan);
- __dma_rx_do_complete(p, true);
- }
+ omap_8250_rx_dma_flush(p);
return -ETIMEDOUT;
default:
break;
}
+ if (priv->rx_dma_broken)
+ return -EINVAL;
+
+ spin_lock_irqsave(&priv->rx_dma_lock, flags);
+
if (dma->rx_running)
- return 0;
+ goto out;
desc = dmaengine_prep_slave_single(dma->rxchan, dma->rx_addr,
dma->rx_size, DMA_DEV_TO_MEM,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
- if (!desc)
- return -EBUSY;
+ if (!desc) {
+ err = -EBUSY;
+ goto out;
+ }
dma->rx_running = 1;
desc->callback = __dma_rx_complete;
@@ -815,7 +845,9 @@ static int omap_8250_rx_dma(struct uart_8250_port *p, unsigned int iir)
dma->rx_size, DMA_FROM_DEVICE);
dma_async_issue_pending(dma->rxchan);
- return 0;
+out:
+ spin_unlock_irqrestore(&priv->rx_dma_lock, flags);
+ return err;
}
static int omap_8250_tx_dma(struct uart_8250_port *p);
@@ -1038,6 +1070,20 @@ static int omap8250_no_handle_irq(struct uart_port *port)
return 0;
}
+static const u8 am3352_habit = OMAP_DMA_TX_KICK | UART_ERRATA_CLOCK_DISABLE;
+static const u8 am4372_habit = UART_ERRATA_CLOCK_DISABLE;
+
+static const struct of_device_id omap8250_dt_ids[] = {
+ { .compatible = "ti,omap2-uart" },
+ { .compatible = "ti,omap3-uart" },
+ { .compatible = "ti,omap4-uart" },
+ { .compatible = "ti,am3352-uart", .data = &am3352_habit, },
+ { .compatible = "ti,am4372-uart", .data = &am4372_habit, },
+ { .compatible = "ti,dra742-uart", .data = &am4372_habit, },
+ {},
+};
+MODULE_DEVICE_TABLE(of, omap8250_dt_ids);
+
static int omap8250_probe(struct platform_device *pdev)
{
struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -1102,11 +1148,17 @@ static int omap8250_probe(struct platform_device *pdev)
up.port.unthrottle = omap_8250_unthrottle;
if (pdev->dev.of_node) {
+ const struct of_device_id *id;
+
ret = of_alias_get_id(pdev->dev.of_node, "serial");
of_property_read_u32(pdev->dev.of_node, "clock-frequency",
&up.port.uartclk);
priv->wakeirq = irq_of_parse_and_map(pdev->dev.of_node, 1);
+
+ id = of_match_device(of_match_ptr(omap8250_dt_ids), &pdev->dev);
+ if (id && id->data)
+ priv->habit |= *(u8 *)id->data;
} else {
ret = pdev->id;
}
@@ -1129,6 +1181,8 @@ static int omap8250_probe(struct platform_device *pdev)
priv->latency);
INIT_WORK(&priv->qos_work, omap8250_uart_qos_work);
+ spin_lock_init(&priv->rx_dma_lock);
+
device_init_wakeup(&pdev->dev, true);
pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_set_autosuspend_delay(&pdev->dev, -1);
@@ -1162,6 +1216,11 @@ static int omap8250_probe(struct platform_device *pdev)
if (of_machine_is_compatible("ti,am33xx"))
priv->habit |= OMAP_DMA_TX_KICK;
+ /*
+ * pause is currently not supported atleast on omap-sdma
+ * and edma on most earlier kernels.
+ */
+ priv->rx_dma_broken = true;
}
}
#endif
@@ -1193,31 +1252,6 @@ static int omap8250_remove(struct platform_device *pdev)
return 0;
}
-#ifdef CONFIG_PM
-
-static inline void omap8250_enable_wakeirq(struct omap8250_priv *priv,
- bool enable)
-{
- if (!priv->wakeirq)
- return;
-
- if (enable)
- enable_irq(priv->wakeirq);
- else
- disable_irq_nosync(priv->wakeirq);
-}
-
-static void omap8250_enable_wakeup(struct omap8250_priv *priv,
- bool enable)
-{
- if (enable == priv->wakeups_enabled)
- return;
-
- omap8250_enable_wakeirq(priv, enable);
- priv->wakeups_enabled = enable;
-}
-#endif
-
#ifdef CONFIG_PM_SLEEP
static int omap8250_prepare(struct device *dev)
{
@@ -1244,11 +1278,6 @@ static int omap8250_suspend(struct device *dev)
serial8250_suspend_port(priv->line);
flush_work(&priv->qos_work);
-
- if (device_may_wakeup(dev))
- omap8250_enable_wakeup(priv, true);
- else
- omap8250_enable_wakeup(priv, false);
return 0;
}
@@ -1256,9 +1285,6 @@ static int omap8250_resume(struct device *dev)
{
struct omap8250_priv *priv = dev_get_drvdata(dev);
- if (device_may_wakeup(dev))
- omap8250_enable_wakeup(priv, false);
-
serial8250_resume_port(priv->line);
return 0;
}
@@ -1272,17 +1298,46 @@ static int omap8250_lost_context(struct uart_8250_port *up)
{
u32 val;
- val = serial_in(up, UART_OMAP_MDR1);
+ val = serial_in(up, UART_OMAP_SCR);
/*
- * If we lose context, then MDR1 is set to its reset value which is
- * UART_OMAP_MDR1_DISABLE. After set_termios() we set it either to 13x
- * or 16x but never to disable again.
+ * If we lose context, then SCR is set to its reset value of zero.
+ * After set_termios() we set bit 3 of SCR (TX_EMPTY_CTL_IT) to 1,
+ * among other bits, to never set the register back to zero again.
*/
- if (val == UART_OMAP_MDR1_DISABLE)
+ if (!val)
return 1;
return 0;
}
+/* TODO: in future, this should happen via API in drivers/reset/ */
+static int omap8250_soft_reset(struct device *dev)
+{
+ struct omap8250_priv *priv = dev_get_drvdata(dev);
+ struct uart_8250_port *up = serial8250_get_port(priv->line);
+ int timeout = 100;
+ int sysc;
+ int syss;
+
+ sysc = serial_in(up, UART_OMAP_SYSC);
+
+ /* softreset the UART */
+ sysc |= OMAP_UART_SYSC_SOFTRESET;
+ serial_out(up, UART_OMAP_SYSC, sysc);
+
+ /* By experiments, 1us enough for reset complete on AM335x */
+ do {
+ udelay(1);
+ syss = serial_in(up, UART_OMAP_SYSS);
+ } while (--timeout && !(syss & OMAP_UART_SYSS_RESETDONE));
+
+ if (!timeout) {
+ dev_err(dev, "timed out waiting for reset done\n");
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
static int omap8250_runtime_suspend(struct device *dev)
{
struct omap8250_priv *priv = dev_get_drvdata(dev);
@@ -1300,8 +1355,18 @@ static int omap8250_runtime_suspend(struct device *dev)
return -EBUSY;
}
- omap8250_enable_wakeup(priv, true);
- if (up->dma)
+ if (priv->habit & UART_ERRATA_CLOCK_DISABLE) {
+ int ret;
+
+ ret = omap8250_soft_reset(dev);
+ if (ret)
+ return ret;
+
+ /* Restore to UART mode after reset (for wakeup) */
+ omap8250_update_mdr1(up, priv);
+ }
+
+ if (up->dma && up->dma->rxchan)
omap_8250_rx_dma(up, UART_IIR_RX_TIMEOUT);
priv->latency = PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE;
@@ -1321,13 +1386,12 @@ static int omap8250_runtime_resume(struct device *dev)
return 0;
up = serial8250_get_port(priv->line);
- omap8250_enable_wakeup(priv, false);
loss_cntx = omap8250_lost_context(up);
if (loss_cntx)
omap8250_restore_regs(up);
- if (up->dma)
+ if (up->dma && up->dma->rxchan)
omap_8250_rx_dma(up, 0);
priv->latency = priv->calc_latency;
@@ -1384,14 +1448,6 @@ static const struct dev_pm_ops omap8250_dev_pm_ops = {
.complete = omap8250_complete,
};
-static const struct of_device_id omap8250_dt_ids[] = {
- { .compatible = "ti,omap2-uart" },
- { .compatible = "ti,omap3-uart" },
- { .compatible = "ti,omap4-uart" },
- {},
-};
-MODULE_DEVICE_TABLE(of, omap8250_dt_ids);
-
static struct platform_driver omap8250_platform_driver = {
.driver = {
.name = "omap8250",