summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/thermal/ti-soc-thermal
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/thermal/ti-soc-thermal')
-rw-r--r--kernel/drivers/thermal/ti-soc-thermal/Kconfig23
-rw-r--r--kernel/drivers/thermal/ti-soc-thermal/Makefile1
-rw-r--r--kernel/drivers/thermal/ti-soc-thermal/omap3-thermal-data.c176
-rw-r--r--kernel/drivers/thermal/ti-soc-thermal/ti-bandgap.c118
-rw-r--r--kernel/drivers/thermal/ti-soc-thermal/ti-bandgap.h11
-rw-r--r--kernel/drivers/thermal/ti-soc-thermal/ti-thermal-common.c15
6 files changed, 278 insertions, 66 deletions
diff --git a/kernel/drivers/thermal/ti-soc-thermal/Kconfig b/kernel/drivers/thermal/ti-soc-thermal/Kconfig
index bd4c7beba..ea8283f08 100644
--- a/kernel/drivers/thermal/ti-soc-thermal/Kconfig
+++ b/kernel/drivers/thermal/ti-soc-thermal/Kconfig
@@ -1,7 +1,5 @@
config TI_SOC_THERMAL
tristate "Texas Instruments SoCs temperature sensor driver"
- depends on THERMAL
- depends on ARCH_HAS_BANDGAP
help
If you say yes here you get support for the Texas Instruments
OMAP4460+ on die bandgap temperature sensor support. The register
@@ -21,10 +19,25 @@ config TI_THERMAL
This includes trip points definitions, extrapolation rules and
CPU cooling device bindings.
+config OMAP3_THERMAL
+ bool "Texas Instruments OMAP3 thermal support"
+ depends on TI_SOC_THERMAL
+ depends on ARCH_OMAP3 || COMPILE_TEST
+ help
+ If you say yes here you get thermal support for the Texas Instruments
+ OMAP3 SoC family. The current chips supported are:
+ - OMAP3430
+
+ OMAP3 chips normally don't need thermal management, and sensors in
+ this generation are not accurate, nor they are very close to
+ the important hotspots.
+
+ Say 'N' here.
+
config OMAP4_THERMAL
bool "Texas Instruments OMAP4 thermal support"
depends on TI_SOC_THERMAL
- depends on ARCH_OMAP4
+ depends on ARCH_OMAP4 || COMPILE_TEST
help
If you say yes here you get thermal support for the Texas Instruments
OMAP4 SoC family. The current chip supported are:
@@ -38,7 +51,7 @@ config OMAP4_THERMAL
config OMAP5_THERMAL
bool "Texas Instruments OMAP5 thermal support"
depends on TI_SOC_THERMAL
- depends on SOC_OMAP5
+ depends on SOC_OMAP5 || COMPILE_TEST
help
If you say yes here you get thermal support for the Texas Instruments
OMAP5 SoC family. The current chip supported are:
@@ -50,7 +63,7 @@ config OMAP5_THERMAL
config DRA752_THERMAL
bool "Texas Instruments DRA752 thermal support"
depends on TI_SOC_THERMAL
- depends on SOC_DRA7XX
+ depends on SOC_DRA7XX || COMPILE_TEST
help
If you say yes here you get thermal support for the Texas Instruments
DRA752 SoC family. The current chip supported are:
diff --git a/kernel/drivers/thermal/ti-soc-thermal/Makefile b/kernel/drivers/thermal/ti-soc-thermal/Makefile
index 1226b2484..0f89bdf03 100644
--- a/kernel/drivers/thermal/ti-soc-thermal/Makefile
+++ b/kernel/drivers/thermal/ti-soc-thermal/Makefile
@@ -2,5 +2,6 @@ obj-$(CONFIG_TI_SOC_THERMAL) += ti-soc-thermal.o
ti-soc-thermal-y := ti-bandgap.o
ti-soc-thermal-$(CONFIG_TI_THERMAL) += ti-thermal-common.o
ti-soc-thermal-$(CONFIG_DRA752_THERMAL) += dra752-thermal-data.o
+ti-soc-thermal-$(CONFIG_OMAP3_THERMAL) += omap3-thermal-data.o
ti-soc-thermal-$(CONFIG_OMAP4_THERMAL) += omap4-thermal-data.o
ti-soc-thermal-$(CONFIG_OMAP5_THERMAL) += omap5-thermal-data.o
diff --git a/kernel/drivers/thermal/ti-soc-thermal/omap3-thermal-data.c b/kernel/drivers/thermal/ti-soc-thermal/omap3-thermal-data.c
new file mode 100644
index 000000000..3ee34340e
--- /dev/null
+++ b/kernel/drivers/thermal/ti-soc-thermal/omap3-thermal-data.c
@@ -0,0 +1,176 @@
+/*
+ * OMAP3 thermal driver.
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Inc.
+ * Copyright (C) 2014 Pavel Machek <pavel@ucw.cz>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Note
+ * http://www.ti.com/lit/er/sprz278f/sprz278f.pdf "Advisory
+ * 3.1.1.186 MMC OCP Clock Not Gated When Thermal Sensor Is Used"
+ *
+ * Also TI says:
+ * Just be careful when you try to make thermal policy like decisions
+ * based on this sensor. Placement of the sensor w.r.t the actual logic
+ * generating heat has to be a factor as well. If you are just looking
+ * for an approximation temperature (thermometerish kind), you might be
+ * ok with this. I am not sure we'd find any TI data around this.. just a
+ * heads up.
+ */
+
+#include "ti-thermal.h"
+#include "ti-bandgap.h"
+
+/*
+ * OMAP34XX has one instance of thermal sensor for MPU
+ * need to describe the individual bit fields
+ */
+static struct temp_sensor_registers
+omap34xx_mpu_temp_sensor_registers = {
+ .temp_sensor_ctrl = 0,
+ .bgap_soc_mask = BIT(8),
+ .bgap_eocz_mask = BIT(7),
+ .bgap_dtemp_mask = 0x7f,
+
+ .bgap_mode_ctrl = 0,
+ .mode_ctrl_mask = BIT(9),
+};
+
+/* Thresholds and limits for OMAP34XX MPU temperature sensor */
+static struct temp_sensor_data omap34xx_mpu_temp_sensor_data = {
+ .min_freq = 32768,
+ .max_freq = 32768,
+ .max_temp = 125000,
+ .min_temp = -40000,
+ .hyst_val = 5000,
+};
+
+/*
+ * Temperature values in milli degree celsius
+ */
+static const int
+omap34xx_adc_to_temp[128] = {
+ -40000, -40000, -40000, -40000, -40000, -39000, -38000, -36000,
+ -34000, -32000, -31000, -29000, -28000, -26000, -25000, -24000,
+ -22000, -21000, -19000, -18000, -17000, -15000, -14000, -12000,
+ -11000, -9000, -8000, -7000, -5000, -4000, -2000, -1000, 0000,
+ 1000, 3000, 4000, 5000, 7000, 8000, 10000, 11000, 13000, 14000,
+ 15000, 17000, 18000, 20000, 21000, 22000, 24000, 25000, 27000,
+ 28000, 30000, 31000, 32000, 34000, 35000, 37000, 38000, 39000,
+ 41000, 42000, 44000, 45000, 47000, 48000, 49000, 51000, 52000,
+ 53000, 55000, 56000, 58000, 59000, 60000, 62000, 63000, 65000,
+ 66000, 67000, 69000, 70000, 72000, 73000, 74000, 76000, 77000,
+ 79000, 80000, 81000, 83000, 84000, 85000, 87000, 88000, 89000,
+ 91000, 92000, 94000, 95000, 96000, 98000, 99000, 100000,
+ 102000, 103000, 105000, 106000, 107000, 109000, 110000, 111000,
+ 113000, 114000, 116000, 117000, 118000, 120000, 121000, 122000,
+ 124000, 124000, 125000, 125000, 125000, 125000, 125000
+};
+
+/* OMAP34XX data */
+const struct ti_bandgap_data omap34xx_data = {
+ .features = TI_BANDGAP_FEATURE_CLK_CTRL | TI_BANDGAP_FEATURE_UNRELIABLE,
+ .fclock_name = "ts_fck",
+ .div_ck_name = "ts_fck",
+ .conv_table = omap34xx_adc_to_temp,
+ .adc_start_val = 0,
+ .adc_end_val = 127,
+ .expose_sensor = ti_thermal_expose_sensor,
+ .remove_sensor = ti_thermal_remove_sensor,
+
+ .sensors = {
+ {
+ .registers = &omap34xx_mpu_temp_sensor_registers,
+ .ts_data = &omap34xx_mpu_temp_sensor_data,
+ .domain = "cpu",
+ .slope = 0,
+ .constant = 20000,
+ .slope_pcb = 0,
+ .constant_pcb = 20000,
+ .register_cooling = NULL,
+ .unregister_cooling = NULL,
+ },
+ },
+ .sensor_count = 1,
+};
+
+/*
+ * OMAP36XX has one instance of thermal sensor for MPU
+ * need to describe the individual bit fields
+ */
+static struct temp_sensor_registers
+omap36xx_mpu_temp_sensor_registers = {
+ .temp_sensor_ctrl = 0,
+ .bgap_soc_mask = BIT(9),
+ .bgap_eocz_mask = BIT(8),
+ .bgap_dtemp_mask = 0xFF,
+
+ .bgap_mode_ctrl = 0,
+ .mode_ctrl_mask = BIT(10),
+};
+
+/* Thresholds and limits for OMAP36XX MPU temperature sensor */
+static struct temp_sensor_data omap36xx_mpu_temp_sensor_data = {
+ .min_freq = 32768,
+ .max_freq = 32768,
+ .max_temp = 125000,
+ .min_temp = -40000,
+ .hyst_val = 5000,
+};
+
+/*
+ * Temperature values in milli degree celsius
+ */
+static const int
+omap36xx_adc_to_temp[128] = {
+ -40000, -40000, -40000, -40000, -40000, -40000, -40000, -40000,
+ -40000, -40000, -40000, -40000, -40000, -38000, -35000, -34000,
+ -32000, -30000, -28000, -26000, -24000, -22000, -20000, -18500,
+ -17000, -15000, -13500, -12000, -10000, -8000, -6500, -5000, -3500,
+ -1500, 0, 2000, 3500, 5000, 6500, 8500, 10000, 12000, 13500,
+ 15000, 17000, 19000, 21000, 23000, 25000, 27000, 28500, 30000,
+ 32000, 33500, 35000, 37000, 38500, 40000, 42000, 43500, 45000,
+ 47000, 48500, 50000, 52000, 53500, 55000, 57000, 58500, 60000,
+ 62000, 64000, 66000, 68000, 70000, 71500, 73500, 75000, 77000,
+ 78500, 80000, 82000, 83500, 85000, 87000, 88500, 90000, 92000,
+ 93500, 95000, 97000, 98500, 100000, 102000, 103500, 105000, 107000,
+ 109000, 111000, 113000, 115000, 117000, 118500, 120000, 122000,
+ 123500, 125000, 125000, 125000, 125000, 125000, 125000, 125000,
+ 125000, 125000, 125000, 125000, 125000, 125000, 125000, 125000,
+ 125000, 125000, 125000, 125000, 125000, 125000, 125000
+};
+
+/* OMAP36XX data */
+const struct ti_bandgap_data omap36xx_data = {
+ .features = TI_BANDGAP_FEATURE_CLK_CTRL | TI_BANDGAP_FEATURE_UNRELIABLE,
+ .fclock_name = "ts_fck",
+ .div_ck_name = "ts_fck",
+ .conv_table = omap36xx_adc_to_temp,
+ .adc_start_val = 0,
+ .adc_end_val = 127,
+ .expose_sensor = ti_thermal_expose_sensor,
+ .remove_sensor = ti_thermal_remove_sensor,
+
+ .sensors = {
+ {
+ .registers = &omap36xx_mpu_temp_sensor_registers,
+ .ts_data = &omap36xx_mpu_temp_sensor_data,
+ .domain = "cpu",
+ .slope = 0,
+ .constant = 20000,
+ .slope_pcb = 0,
+ .constant_pcb = 20000,
+ .register_cooling = NULL,
+ .unregister_cooling = NULL,
+ },
+ },
+ .sensor_count = 1,
+};
diff --git a/kernel/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/kernel/drivers/thermal/ti-soc-thermal/ti-bandgap.c
index bc14dc874..1e34a1efc 100644
--- a/kernel/drivers/thermal/ti-soc-thermal/ti-bandgap.c
+++ b/kernel/drivers/thermal/ti-soc-thermal/ti-bandgap.c
@@ -43,6 +43,8 @@
#include "ti-bandgap.h"
+static int ti_bandgap_force_single_read(struct ti_bandgap *bgp, int id);
+
/*** Helper functions to access registers and their bitfields ***/
/**
@@ -103,19 +105,15 @@ do { \
*/
static int ti_bandgap_power(struct ti_bandgap *bgp, bool on)
{
- int i, ret = 0;
+ int i;
- if (!TI_BANDGAP_HAS(bgp, POWER_SWITCH)) {
- ret = -ENOTSUPP;
- goto exit;
- }
+ if (!TI_BANDGAP_HAS(bgp, POWER_SWITCH))
+ return -ENOTSUPP;
for (i = 0; i < bgp->conf->sensor_count; i++)
/* active on 0 */
RMW_BITS(bgp, i, temp_sensor_ctrl, bgap_tempsoff_mask, !on);
-
-exit:
- return ret;
+ return 0;
}
/**
@@ -298,18 +296,13 @@ static
int ti_bandgap_adc_to_mcelsius(struct ti_bandgap *bgp, int adc_val, int *t)
{
const struct ti_bandgap_data *conf = bgp->conf;
- int ret = 0;
/* look up for temperature in the table and return the temperature */
- if (adc_val < conf->adc_start_val || adc_val > conf->adc_end_val) {
- ret = -ERANGE;
- goto exit;
- }
+ if (adc_val < conf->adc_start_val || adc_val > conf->adc_end_val)
+ return -ERANGE;
*t = bgp->conf->conv_table[adc_val - conf->adc_start_val];
-
-exit:
- return ret;
+ return 0;
}
/**
@@ -330,16 +323,14 @@ int ti_bandgap_mcelsius_to_adc(struct ti_bandgap *bgp, long temp, int *adc)
{
const struct ti_bandgap_data *conf = bgp->conf;
const int *conv_table = bgp->conf->conv_table;
- int high, low, mid, ret = 0;
+ int high, low, mid;
low = 0;
high = conf->adc_end_val - conf->adc_start_val;
mid = (high + low) / 2;
- if (temp < conv_table[low] || temp > conv_table[high]) {
- ret = -ERANGE;
- goto exit;
- }
+ if (temp < conv_table[low] || temp > conv_table[high])
+ return -ERANGE;
while (low < high) {
if (temp < conv_table[mid])
@@ -350,9 +341,7 @@ int ti_bandgap_mcelsius_to_adc(struct ti_bandgap *bgp, long temp, int *adc)
}
*adc = conf->adc_start_val + low;
-
-exit:
- return ret;
+ return 0;
}
/**
@@ -378,13 +367,11 @@ int ti_bandgap_add_hyst(struct ti_bandgap *bgp, int adc_val, int hyst_val,
*/
ret = ti_bandgap_adc_to_mcelsius(bgp, adc_val, &temp);
if (ret < 0)
- goto exit;
+ return ret;
temp += hyst_val;
ret = ti_bandgap_mcelsius_to_adc(bgp, temp, sum);
-
-exit:
return ret;
}
@@ -542,22 +529,18 @@ exit:
*/
static inline int ti_bandgap_validate(struct ti_bandgap *bgp, int id)
{
- int ret = 0;
-
if (!bgp || IS_ERR(bgp)) {
pr_err("%s: invalid bandgap pointer\n", __func__);
- ret = -EINVAL;
- goto exit;
+ return -EINVAL;
}
if ((id < 0) || (id >= bgp->conf->sensor_count)) {
dev_err(bgp->dev, "%s: sensor id out of range (%d)\n",
__func__, id);
- ret = -ERANGE;
+ return -ERANGE;
}
-exit:
- return ret;
+ return 0;
}
/**
@@ -585,12 +568,10 @@ static int _ti_bandgap_write_threshold(struct ti_bandgap *bgp, int id, int val,
ret = ti_bandgap_validate(bgp, id);
if (ret)
- goto exit;
+ return ret;
- if (!TI_BANDGAP_HAS(bgp, TALERT)) {
- ret = -ENOTSUPP;
- goto exit;
- }
+ if (!TI_BANDGAP_HAS(bgp, TALERT))
+ return -ENOTSUPP;
ts_data = bgp->conf->sensors[id].ts_data;
tsr = bgp->conf->sensors[id].registers;
@@ -603,17 +584,15 @@ static int _ti_bandgap_write_threshold(struct ti_bandgap *bgp, int id, int val,
}
if (ret)
- goto exit;
+ return ret;
ret = ti_bandgap_mcelsius_to_adc(bgp, val, &adc_val);
if (ret < 0)
- goto exit;
+ return ret;
spin_lock(&bgp->lock);
ret = ti_bandgap_update_alert_threshold(bgp, id, adc_val, hot);
spin_unlock(&bgp->lock);
-
-exit:
return ret;
}
@@ -656,7 +635,7 @@ static int _ti_bandgap_read_threshold(struct ti_bandgap *bgp, int id,
temp = ti_bandgap_readl(bgp, tsr->bgap_threshold);
temp = (temp & mask) >> __ffs(mask);
- ret |= ti_bandgap_adc_to_mcelsius(bgp, temp, &temp);
+ ret = ti_bandgap_adc_to_mcelsius(bgp, temp, &temp);
if (ret) {
dev_err(bgp->dev, "failed to read thot\n");
ret = -EIO;
@@ -926,11 +905,17 @@ int ti_bandgap_read_temperature(struct ti_bandgap *bgp, int id,
if (ret)
return ret;
+ if (!TI_BANDGAP_HAS(bgp, MODE_CONFIG)) {
+ ret = ti_bandgap_force_single_read(bgp, id);
+ if (ret)
+ return ret;
+ }
+
spin_lock(&bgp->lock);
temp = ti_bandgap_read_temp(bgp, id);
spin_unlock(&bgp->lock);
- ret |= ti_bandgap_adc_to_mcelsius(bgp, temp, &temp);
+ ret = ti_bandgap_adc_to_mcelsius(bgp, temp, &temp);
if (ret)
return -EIO;
@@ -991,7 +976,8 @@ void *ti_bandgap_get_sensor_data(struct ti_bandgap *bgp, int id)
static int
ti_bandgap_force_single_read(struct ti_bandgap *bgp, int id)
{
- u32 temp = 0, counter = 1000;
+ u32 counter = 1000;
+ struct temp_sensor_registers *tsr;
/* Select single conversion mode */
if (TI_BANDGAP_HAS(bgp, MODE_CONFIG))
@@ -999,16 +985,27 @@ ti_bandgap_force_single_read(struct ti_bandgap *bgp, int id)
/* Start of Conversion = 1 */
RMW_BITS(bgp, id, temp_sensor_ctrl, bgap_soc_mask, 1);
- /* Wait until DTEMP is updated */
- temp = ti_bandgap_read_temp(bgp, id);
- while ((temp == 0) && --counter)
- temp = ti_bandgap_read_temp(bgp, id);
- /* REVISIT: Check correct condition for end of conversion */
+ /* Wait for EOCZ going up */
+ tsr = bgp->conf->sensors[id].registers;
+
+ while (--counter) {
+ if (ti_bandgap_readl(bgp, tsr->temp_sensor_ctrl) &
+ tsr->bgap_eocz_mask)
+ break;
+ }
/* Start of Conversion = 0 */
RMW_BITS(bgp, id, temp_sensor_ctrl, bgap_soc_mask, 0);
+ /* Wait for EOCZ going down */
+ counter = 1000;
+ while (--counter) {
+ if (!(ti_bandgap_readl(bgp, tsr->temp_sensor_ctrl) &
+ tsr->bgap_eocz_mask))
+ break;
+ }
+
return 0;
}
@@ -1277,6 +1274,10 @@ int ti_bandgap_probe(struct platform_device *pdev)
}
bgp->dev = &pdev->dev;
+ if (TI_BANDGAP_HAS(bgp, UNRELIABLE))
+ dev_warn(&pdev->dev,
+ "This OMAP thermal sensor is unreliable. You've been warned\n");
+
if (TI_BANDGAP_HAS(bgp, TSHUT)) {
ret = ti_bandgap_tshut_init(bgp, pdev);
if (ret) {
@@ -1294,11 +1295,10 @@ int ti_bandgap_probe(struct platform_device *pdev)
goto free_irqs;
}
- bgp->div_clk = clk_get(NULL, bgp->conf->div_ck_name);
+ bgp->div_clk = clk_get(NULL, bgp->conf->div_ck_name);
ret = IS_ERR(bgp->div_clk);
if (ret) {
- dev_err(&pdev->dev,
- "failed to request div_ts_ck clock ref\n");
+ dev_err(&pdev->dev, "failed to request div_ts_ck clock ref\n");
ret = PTR_ERR(bgp->div_clk);
goto free_irqs;
}
@@ -1583,6 +1583,16 @@ static SIMPLE_DEV_PM_OPS(ti_bandgap_dev_pm_ops, ti_bandgap_suspend,
#endif
static const struct of_device_id of_ti_bandgap_match[] = {
+#ifdef CONFIG_OMAP3_THERMAL
+ {
+ .compatible = "ti,omap34xx-bandgap",
+ .data = (void *)&omap34xx_data,
+ },
+ {
+ .compatible = "ti,omap36xx-bandgap",
+ .data = (void *)&omap36xx_data,
+ },
+#endif
#ifdef CONFIG_OMAP4_THERMAL
{
.compatible = "ti,omap4430-bandgap",
diff --git a/kernel/drivers/thermal/ti-soc-thermal/ti-bandgap.h b/kernel/drivers/thermal/ti-soc-thermal/ti-bandgap.h
index 0c52f7afb..fe0adb898 100644
--- a/kernel/drivers/thermal/ti-soc-thermal/ti-bandgap.h
+++ b/kernel/drivers/thermal/ti-soc-thermal/ti-bandgap.h
@@ -322,6 +322,8 @@ struct ti_temp_sensor {
* has Errata 814
* TI_BANDGAP_FEATURE_ERRATA_813 - used to workaorund when the bandgap device
* has Errata 813
+ * TI_BANDGAP_FEATURE_UNRELIABLE - used when the sensor readings are too
+ * inaccurate.
* TI_BANDGAP_HAS(b, f) - macro to check if a bandgap device is capable of a
* specific feature (above) or not. Return non-zero, if yes.
*/
@@ -337,6 +339,7 @@ struct ti_temp_sensor {
#define TI_BANDGAP_FEATURE_HISTORY_BUFFER BIT(9)
#define TI_BANDGAP_FEATURE_ERRATA_814 BIT(10)
#define TI_BANDGAP_FEATURE_ERRATA_813 BIT(11)
+#define TI_BANDGAP_FEATURE_UNRELIABLE BIT(12)
#define TI_BANDGAP_HAS(b, f) \
((b)->conf->features & TI_BANDGAP_FEATURE_ ## f)
@@ -390,6 +393,14 @@ int ti_bandgap_set_sensor_data(struct ti_bandgap *bgp, int id, void *data);
void *ti_bandgap_get_sensor_data(struct ti_bandgap *bgp, int id);
int ti_bandgap_get_trend(struct ti_bandgap *bgp, int id, int *trend);
+#ifdef CONFIG_OMAP3_THERMAL
+extern const struct ti_bandgap_data omap34xx_data;
+extern const struct ti_bandgap_data omap36xx_data;
+#else
+#define omap34xx_data NULL
+#define omap36xx_data NULL
+#endif
+
#ifdef CONFIG_OMAP4_THERMAL
extern const struct ti_bandgap_data omap4430_data;
extern const struct ti_bandgap_data omap4460_data;
diff --git a/kernel/drivers/thermal/ti-soc-thermal/ti-thermal-common.c b/kernel/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
index a38c17564..b213a1222 100644
--- a/kernel/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
+++ b/kernel/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
@@ -75,15 +75,15 @@ static inline int ti_thermal_hotspot_temperature(int t, int s, int c)
}
/* thermal zone ops */
-/* Get temperature callback function for thermal zone*/
-static inline int __ti_thermal_get_temp(void *devdata, long *temp)
+/* Get temperature callback function for thermal zone */
+static inline int __ti_thermal_get_temp(void *devdata, int *temp)
{
struct thermal_zone_device *pcb_tz = NULL;
struct ti_thermal_data *data = devdata;
struct ti_bandgap *bgp;
const struct ti_temp_sensor *s;
int ret, tmp, slope, constant;
- unsigned long pcb_temp;
+ int pcb_temp;
if (!data)
return 0;
@@ -119,7 +119,7 @@ static inline int __ti_thermal_get_temp(void *devdata, long *temp)
}
static inline int ti_thermal_get_temp(struct thermal_zone_device *thermal,
- unsigned long *temp)
+ int *temp)
{
struct ti_thermal_data *data = thermal->devdata;
@@ -146,7 +146,8 @@ static int ti_thermal_bind(struct thermal_zone_device *thermal,
return thermal_zone_bind_cooling_device(thermal, 0, cdev,
/* bind with min and max states defined by cpu_cooling */
THERMAL_NO_LIMIT,
- THERMAL_NO_LIMIT);
+ THERMAL_NO_LIMIT,
+ THERMAL_WEIGHT_DEFAULT);
}
/* Unbind callback functions for thermal zone */
@@ -228,7 +229,7 @@ static int ti_thermal_get_trip_type(struct thermal_zone_device *thermal,
/* Get trip temperature callback functions for thermal zone */
static int ti_thermal_get_trip_temp(struct thermal_zone_device *thermal,
- int trip, unsigned long *temp)
+ int trip, int *temp)
{
if (!ti_thermal_is_valid_trip(trip))
return -EINVAL;
@@ -279,7 +280,7 @@ static int ti_thermal_get_trend(struct thermal_zone_device *thermal,
/* Get critical temperature callback functions for thermal zone */
static int ti_thermal_get_crit_temp(struct thermal_zone_device *thermal,
- unsigned long *temp)
+ int *temp)
{
/* shutdown zone */
return ti_thermal_get_trip_temp(thermal, OMAP_TRIP_NUMBER - 1, temp);