diff options
Diffstat (limited to 'kernel/drivers/staging/wilc1000/wilc_wlan_if.h')
| -rw-r--r-- | kernel/drivers/staging/wilc1000/wilc_wlan_if.h | 946 |
1 files changed, 946 insertions, 0 deletions
diff --git a/kernel/drivers/staging/wilc1000/wilc_wlan_if.h b/kernel/drivers/staging/wilc1000/wilc_wlan_if.h new file mode 100644 index 000000000..be972afe6 --- /dev/null +++ b/kernel/drivers/staging/wilc1000/wilc_wlan_if.h @@ -0,0 +1,946 @@ +/* ///////////////////////////////////////////////////////////////////////// */ +/* */ +/* Copyright (c) Atmel Corporation. All rights reserved. */ +/* */ +/* Module Name: wilc_wlan_if.h */ +/* */ +/* */ +/* ///////////////////////////////////////////////////////////////////////// */ + +#ifndef WILC_WLAN_IF_H +#define WILC_WLAN_IF_H + +#include <linux/semaphore.h> +#include "linux_wlan_common.h" + +/******************************************** + * + * Debug Flags + * + ********************************************/ + +#define N_INIT 0x00000001 +#define N_ERR 0x00000002 +#define N_TXQ 0x00000004 +#define N_INTR 0x00000008 +#define N_RXQ 0x00000010 + +/******************************************** + * + * Host Interface Defines + * + ********************************************/ + +#define HIF_SDIO (0) +#define HIF_SPI BIT(0) +#define HIF_SDIO_GPIO_IRQ BIT(2) + +/******************************************** + * + * Tx/Rx Buffer Size Defines + * + ********************************************/ + +#define CE_TX_BUFFER_SIZE (64 * 1024) +#define CE_RX_BUFFER_SIZE (384 * 1024) + +/******************************************** + * + * Wlan Interface Defines + * + ********************************************/ + +typedef struct { + u32 read_write: 1; + u32 function: 3; + u32 raw: 1; + u32 address: 17; + u32 data: 8; +} sdio_cmd52_t; + +typedef struct { + /* struct { */ + u32 read_write: 1; + u32 function: 3; + u32 block_mode: 1; + u32 increment: 1; + u32 address: 17; + u32 count: 9; + /* } bit; */ + u8 *buffer; + u32 block_size; +} sdio_cmd53_t; + +typedef struct { + int io_type; + int (*io_init)(void *); + void (*io_deinit)(void *); + union { + struct { + int (*sdio_cmd52)(sdio_cmd52_t *); + int (*sdio_cmd53)(sdio_cmd53_t *); + int (*sdio_set_max_speed)(void); + int (*sdio_set_default_speed)(void); + } sdio; + struct { + int (*spi_max_speed)(void); + int (*spi_tx)(u8 *, u32); + int (*spi_rx)(u8 *, u32); + int (*spi_trx)(u8 *, u8 *, u32); + } spi; + } u; +} wilc_wlan_io_func_t; + +#define WILC_MAC_INDICATE_STATUS 0x1 +#define WILC_MAC_STATUS_INIT -1 +#define WILC_MAC_STATUS_READY 0 +#define WILC_MAC_STATUS_CONNECT 1 + +#define WILC_MAC_INDICATE_SCAN 0x2 + +typedef struct { + void *os_private; +} wilc_wlan_os_context_t; + +typedef struct { + wilc_wlan_os_context_t os_context; + wilc_wlan_io_func_t io_func; +} wilc_wlan_inp_t; + +struct tx_complete_data { + int size; + void *buff; + u8 *pBssid; + struct sk_buff *skb; +}; + +typedef void (*wilc_tx_complete_func_t)(void *, int); + +#define WILC_TX_ERR_NO_BUF (-2) + +/******************************************** + * + * Wlan Configuration ID + * + ********************************************/ + +#define MAX_SSID_LEN 33 +#define MAX_RATES_SUPPORTED 12 + +#define INFINITE_SLEEP_TIME ((u32)0xFFFFFFFF) + +typedef enum { + SUPP_RATES_IE = 1, + EXT_SUPP_RATES_IE = 50, + HT_CAPABILITY_IE = 45, + RSN_IE = 48, + WPA_IE = 221, + WMM_IE = 221, + P2P_IE = 221, +} BEACON_IE; + +typedef enum { + INFRASTRUCTURE = 0, + INDEPENDENT, + AP, +} BSSTYPE_T; + +typedef enum { + RATE_AUTO = 0, + RATE_1MB = 1, + RATE_2MB = 2, + RATE_5MB = 5, + RATE_6MB = 6, + RATE_9MB = 9, + RATE_11MB = 11, + RATE_12MB = 12, + RATE_18MB = 18, + RATE_24MB = 24, + RATE_26MB = 36, + RATE_48MB = 48, + RATE_54MB = 54 +} TX_RATE_T; + +typedef enum { + B_ONLY_MODE = 0, /* 1, 2 M, otherwise 5, 11 M */ + G_ONLY_MODE, /* 6,12,24 otherwise 9,18,36,48,54 */ + G_MIXED_11B_1_MODE, /* 1,2,5.5,11 otherwise all on */ + G_MIXED_11B_2_MODE, /* 1,2,5,11,6,12,24 otherwise all on */ +} G_OPERATING_MODE_T; + +typedef enum { + G_SHORT_PREAMBLE = 0, /* Short Preamble */ + G_LONG_PREAMBLE = 1, /* Long Preamble */ + G_AUTO_PREAMBLE = 2, /* Auto Preamble Selection */ +} G_PREAMBLE_T; + +#define MAC_CONNECTED 1 +#define MAC_DISCONNECTED 0 + +#define SCAN_DONE TRUE +typedef enum { + PASSIVE_SCAN = 0, + ACTIVE_SCAN = 1, +} SCANTYPE_T; + +typedef enum { + NO_POWERSAVE = 0, + MIN_FAST_PS = 1, + MAX_FAST_PS = 2, + MIN_PSPOLL_PS = 3, + MAX_PSPOLL_PS = 4 +} USER_PS_MODE_T; + +typedef enum { + CHIP_WAKEDUP = 0, + CHIP_SLEEPING_AUTO = 1, + CHIP_SLEEPING_MANUAL = 2 +} CHIP_PS_STATE_T; + +typedef enum { + ACQUIRE_ONLY = 0, + ACQUIRE_AND_WAKEUP = 1, +} BUS_ACQUIRE_T; + +typedef enum { + RELEASE_ONLY = 0, + RELEASE_ALLOW_SLEEP = 1, +} BUS_RELEASE_T; + +typedef enum { + NO_SECURITY = 0, + WEP_40 = 0x3, + WEP_104 = 0x7, + WPA_AES = 0x29, + WPA_TKIP = 0x49, + WPA_AES_TKIP = 0x69, /* Aes or Tkip */ + WPA2_AES = 0x31, + WPA2_TKIP = 0x51, + WPA2_AES_TKIP = 0x71, /* Aes or Tkip */ +} SECURITY_T; + +enum AUTHTYPE { + OPEN_SYSTEM = 1, + SHARED_KEY = 2, + ANY = 3, + IEEE8021 = 5 +}; + +enum SITESURVEY { + SITE_SURVEY_1CH = 0, + SITE_SURVEY_ALL_CH = 1, + SITE_SURVEY_OFF = 2 +}; + +typedef enum { + NORMAL_ACK = 0, + NO_ACK, +} ACK_POLICY_T; + +typedef enum { + DONT_RESET = 0, + DO_RESET = 1, + NO_REQUEST = 2, +} RESET_REQ_T; + +typedef enum { + REKEY_DISABLE = 1, + REKEY_TIME_BASE, + REKEY_PKT_BASE, + REKEY_TIME_PKT_BASE +} RSNA_REKEY_POLICY_T; + +typedef enum { + FILTER_NO = 0x00, + FILTER_AP_ONLY = 0x01, + FILTER_STA_ONLY = 0x02 +} SCAN_CLASS_FITLER_T; + +typedef enum { + PRI_HIGH_RSSI = 0x00, + PRI_LOW_RSSI = 0x04, + PRI_DETECT = 0x08 +} SCAN_PRI_T; + +typedef enum { + CH_FILTER_OFF = 0x00, + CH_FILTER_ON = 0x10 +} CH_FILTER_T; + +typedef enum { + AUTO_PROT = 0, /* Auto */ + NO_PROT, /* Do not use any protection */ + ERP_PROT, /* Protect all ERP frame exchanges */ + HT_PROT, /* Protect all HT frame exchanges */ + GF_PROT, /* Protect all GF frame exchanges */ +} N_PROTECTION_MODE_T; + +typedef enum { + G_SELF_CTS_PROT, + G_RTS_CTS_PROT, +} G_PROTECTION_MODE_T; + +typedef enum { + HT_MIXED_MODE = 1, + HT_ONLY_20MHZ_MODE, + HT_ONLY_20_40MHZ_MODE, +} N_OPERATING_MODE_T; + +typedef enum { + NO_DETECT = 0, + DETECT_ONLY = 1, + DETECT_PROTECT = 2, + DETECT_PROTECT_REPORT = 3, +} N_OBSS_DETECTION_T; + +typedef enum { + RTS_CTS_NONHT_PROT = 0, /* RTS-CTS at non-HT rate */ + FIRST_FRAME_NONHT_PROT, /* First frame at non-HT rate */ + LSIG_TXOP_PROT, /* LSIG TXOP Protection */ + FIRST_FRAME_MIXED_PROT, /* First frame at Mixed format */ +} N_PROTECTION_TYPE_T; + +typedef enum { + STATIC_MODE = 1, + DYNAMIC_MODE = 2, + MIMO_MODE = 3, /* power save disable */ +} N_SMPS_MODE_T; + +typedef enum { + DISABLE_SELF_CTS, + ENABLE_SELF_CTS, + DISABLE_TX_ABORT, + ENABLE_TX_ABORT, + HW_TRIGGER_ABORT, + SW_TRIGGER_ABORT, +} TX_ABORT_OPTION_T; + +enum WID_TYPE { + WID_CHAR = 0, + WID_SHORT = 1, + WID_INT = 2, + WID_STR = 3, + WID_BIN_DATA = 4, + WID_BIN = 5, + WID_IP = 6, + WID_ADR = 7, + WID_UNDEF = 8, + WID_TYPE_FORCE_32BIT = 0xFFFFFFFF +}; + +typedef enum { + WID_NIL = 0xffff, + + /* + * BSS Type + * ----------------------------------------------------------- + * Configuration : Infrastructure Independent Access Point + * Values to set : 0 1 2 + * ----------------------------------------------------------- + */ + WID_BSS_TYPE = 0x0000, + + /* + * Transmit Rate + * ----------------------------------------------------------- + * Configuration : 1 2 5.5 11 6 9 12 18 24 36 48 54 + * Values to set : 1 2 5 11 6 9 12 18 24 36 48 54 + * ----------------------------------------------------------- + */ + WID_CURRENT_TX_RATE = 0x0001, + + /* + * Channel + * ----------------------------------------------------------- + * Configuration(g) : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 + * Values to set : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 + * ----------------------------------------------------------- + */ + WID_CURRENT_CHANNEL = 0x0002, + + /* + * Preamble + * ----------------------------------------------------------- + * Configuration : short long Auto + * Values to set : 0 1 2 + * ----------------------------------------------------------- + */ + WID_PREAMBLE = 0x0003, + + /* + * 11g operating mode (ignored if 11g not present) + * ----------------------------------------------------------- + * Configuration : HighPerf Compat(RSet #1) Compat(RSet #2) + * Values to set : 1 2 3 + * ----------------------------------------------------------- + */ + WID_11G_OPERATING_MODE = 0x0004, + + /* + * Mac status (response only) + * ----------------------------------------------------------- + * Configuration : disconnect connect + * Values to get : 0 1 + * ----------------------------------------------------------- + */ + WID_STATUS = 0x0005, + + /* + * Scan type + * ----------------------------------------------------------- + * Configuration : Passive Scanning Active Scanning + * Values to set : 0 1 + * ----------------------------------------------------------- + */ + WID_SCAN_TYPE = 0x0007, + + /* + * Key Id (WEP default key Id) + * ----------------------------------------------------------- + * Configuration : Any value between 0 to 3 + * Values to set : Same value. Default is 0 + * ----------------------------------------------------------- + */ + WID_KEY_ID = 0x0009, + + /* + * QoS Enable + * ----------------------------------------------------------- + * Configuration : QoS Disable WMM Enable + * Values to set : 0 1 + * ----------------------------------------------------------- + */ + WID_QOS_ENABLE = 0x000A, + + /* + * Power Management + * ----------------------------------------------------------- + * Configuration : NO_POWERSAVE MIN_POWERSAVE MAX_POWERSAVE + * Values to set : 0 1 2 + * ----------------------------------------------------------- + */ + WID_POWER_MANAGEMENT = 0x000B, + + /* + * WEP/802 11I Configuration + * ----------------------------------------------------------- + * Configuration:Disable WP40 WP104 WPA-AES WPA-TKIP RSN-AES RSN-TKIP + * Values (0x) : 00 03 07 29 49 31 51 + * Configuration:WPA-AES+TKIP RSN-AES+TKIP + * Values (0x) : 69 71 + * ----------------------------------------------------------- + */ + WID_11I_MODE = 0x000C, + + /* + * WEP Configuration: Used in BSS STA mode only when WEP is enabled + * ----------------------------------------------------------- + * Configuration : Open System Shared Key Any Type | 802.1x Auth + * Values (0x) : 01 02 03 | BIT2 + * ----------------------------------------------------------- + */ + WID_AUTH_TYPE = 0x000D, + + /* + * Site Survey Type + * ----------------------------------------------------------- + * Configuration : Values to set + * Survey 1 Channel : 0 + * survey all Channels : 1 + * Disable Site Survey : 2 + * ----------------------------------------------------------- + */ + WID_SITE_SURVEY = 0x000E, + + /* + * Listen Interval + * ----------------------------------------------------------- + * Configuration : Any value between 1 to 255 + * Values to set : Same value. Default is 3 + * ----------------------------------------------------------- + */ + WID_LISTEN_INTERVAL = 0x000F, + + /* + * DTIM Period + * ----------------------------------------------------------- + * Configuration : Any value between 1 to 255 + * Values to set : Same value. Default is 3 + * ----------------------------------------------------------- + */ + WID_DTIM_PERIOD = 0x0010, + + /* + * ACK Policy + * ----------------------------------------------------------- + * Configuration : Normal Ack No Ack + * Values to set : 0 1 + * ----------------------------------------------------------- + */ + WID_ACK_POLICY = 0x0011, + + /* + * Reset MAC (Set only) + * ----------------------------------------------------------- + * Configuration : Don't Reset Reset No Request + * Values to set : 0 1 2 + * ----------------------------------------------------------- + */ + WID_RESET = 0x0012, + + /* + * Broadcast SSID Option: Setting this will adhere to "" SSID element + * ----------------------------------------------------------- + * Configuration : Enable Disable + * Values to set : 1 0 + * ----------------------------------------------------------- + */ + WID_BCAST_SSID = 0x0015, + + /* + * Disconnect (Station) + * ----------------------------------------------------------- + * Configuration : Association ID + * Values to set : Association ID + * ----------------------------------------------------------- + */ + WID_DISCONNECT = 0x0016, + + /* + * 11a Tx Power Level + * ----------------------------------------------------------- + * Configuration : Sets TX Power (Higher the value greater the power) + * Values to set : Any value between 0 and 63 (inclusive Default 48) + * ----------------------------------------------------------- + */ + WID_TX_POWER_LEVEL_11A = 0x0018, + + /* + * Group Key Update Policy Selection + * ----------------------------------------------------------- + * Configuration : Disabled timeBased packetBased timePacketBased + * Values to set : 1 2 3 4 + * ----------------------------------------------------------- + */ + WID_REKEY_POLICY = 0x0019, + + /* + * Allow Short Slot + * ----------------------------------------------------------- + * Configuration : Disallow Short Slot Allow Short Slot + * (Enable Only Long Slot) (Enable Short Slot if applicable) + * Values to set : 0 1 + * ----------------------------------------------------------- + */ + WID_SHORT_SLOT_ALLOWED = 0x001A, + + WID_PHY_ACTIVE_REG = 0x001B, + + /* + * 11b Tx Power Level + * ----------------------------------------------------------- + * Configuration : Sets TX Power (Higher the value greater the power) + * Values to set : Any value between 0 and 63 (inclusive Default 48) + * ----------------------------------------------------------- + */ + WID_TX_POWER_LEVEL_11B = 0x001D, + + /* + * Scan Request + * ----------------------------------------------------------- + * Configuration : Request default scan + * Values to set : 0 + * ----------------------------------------------------------- + */ + WID_START_SCAN_REQ = 0x001E, + + /* + * Rssi (get only) + * ----------------------------------------------------------- + * Configuration : + * Values to get : Rssi value + * ----------------------------------------------------------- + */ + WID_RSSI = 0x001F, + + /* + * Join Request + * ----------------------------------------------------------- + * Configuration : Request to join + * Values to set : index of scan result + * ----------------------------------------------------------- + */ + WID_JOIN_REQ = 0x0020, + + WID_LINKSPEED = 0x0026, + + /* + * Enable User Control of TX Power + * ----------------------------------------------------------- + * Configuration : Disable Enable + * Values to set : 0 1 + * ----------------------------------------------------------- + */ + WID_USER_CONTROL_ON_TX_POWER = 0x0027, + + WID_MEMORY_ACCESS_8BIT = 0x0029, + + /* + * Enable Auto RX Sensitivity feature + * ----------------------------------------------------------- + * Configuration : Disable Enable + * Values to set : 0 1 + * ----------------------------------------------------------- + */ + WID_AUTO_RX_SENSITIVITY = 0x0032, + + /* + * Receive Buffer Based Ack + * ----------------------------------------------------------- + * Configuration : Disable Enable + * Values to set : 0 1 + * ----------------------------------------------------------- + */ + WID_DATAFLOW_CONTROL = 0x0033, + + /* + * Scan Filter + * ----------------------------------------------------------- + * Configuration : Class No filter AP only Station Only + * Values to set : 0 1 2 + * Configuration : Priority High Rssi Low Rssi Detect + * Values to set : 0 0x4 0x0 + * Configuration : Channel filter off filter on + * Values to set : 0 0x10 + * ----------------------------------------------------------- + */ + WID_SCAN_FILTER = 0x0036, + + /* + * Link Loss Threshold (measure in the beacon period) + * ----------------------------------------------------------- + * Configuration : Any value between 10 and 254(Set to 255 disable) + * Values to set : Same value. Default is 10 + * ----------------------------------------------------------- + */ + WID_LINK_LOSS_THRESHOLD = 0x0037, + + WID_ABORT_RUNNING_SCAN = 0x003E, + + /* NMAC Character WID list */ + WID_WPS_START = 0x0043, + + /* + * Protection mode for MAC + * ----------------------------------------------------------- + * Configuration : Auto No protection ERP HT GF + * Values to set : 0 1 2 3 4 + * ----------------------------------------------------------- + */ + WID_11N_PROT_MECH = 0x0080, + + /* + * ERP Protection type for MAC + * ----------------------------------------------------------- + * Configuration : Self-CTS RTS-CTS + * Values to set : 0 1 + * ----------------------------------------------------------- + */ + WID_11N_ERP_PROT_TYPE = 0x0081, + + /* + * HT Option Enable + * ----------------------------------------------------------- + * Configuration : HT Enable HT Disable + * Values to set : 1 0 + * ----------------------------------------------------------- + */ + WID_11N_ENABLE = 0x0082, + + /* + * 11n Operating mode (Note that 11g operating mode will also be + * used in addition to this, if this is set to HT Mixed mode) + * ----------------------------------------------------------- + * Configuration : HT Mixed HT Only-20MHz HT Only-20/40MHz + * Values to set : 1 2 3 + * ----------------------------------------------------------- + */ + WID_11N_OPERATING_MODE = 0x0083, + + /* + * 11n OBSS non-HT STA Detection flag + * ----------------------------------------------------------- + * Configuration : Do not detect + * Values to set : 0 + * Configuration : Detect, do not protect or report + * Values to set : 1 + * Configuration : Detect, protect and do not report + * Values to set : 2 + * Configuration : Detect, protect and report to other BSS + * Values to set : 3 + * ----------------------------------------------------------- + */ + WID_11N_OBSS_NONHT_DETECTION = 0x0084, + + /* + * 11n HT Protection Type + * ----------------------------------------------------------- + * Configuration : RTS-CTS First Frame Exchange at non-HT-rate + * Values to set : 0 1 + * Configuration : LSIG TXOP First Frame Exchange in Mixed Fmt + * Values to set : 2 3 + * ----------------------------------------------------------- + */ + WID_11N_HT_PROT_TYPE = 0x0085, + + /* + * 11n RIFS Protection Enable Flag + * ----------------------------------------------------------- + * Configuration : Disable Enable + * Values to set : 0 1 + * ----------------------------------------------------------- + */ + WID_11N_RIFS_PROT_ENABLE = 0x0086, + + /* + * SMPS Mode + * ----------------------------------------------------------- + * Configuration : Static Dynamic MIMO (Power Save Disabled) + * Values to set : 1 2 3 + * ----------------------------------------------------------- + */ + WID_11N_SMPS_MODE = 0x0087, + + /* + * Current transmit MCS + * ----------------------------------------------------------- + * Configuration : MCS Index for data rate + * Values to set : 0 to 7 + * ----------------------------------------------------------- + */ + WID_11N_CURRENT_TX_MCS = 0x0088, + + WID_11N_PRINT_STATS = 0x0089, + + /* + * 11n Short GI Enable Flag + * ----------------------------------------------------------- + * Configuration : Disable Enable + * Values to set : 0 1 + * ----------------------------------------------------------- + */ + WID_11N_SHORT_GI_ENABLE = 0x008D, + + /* + * 11n RIFS Enable Flag + * ----------------------------------------------------------- + * Configuration : Disable Enable + * Values to set : 0 1 + * ----------------------------------------------------------- + */ + WID_RIFS_MODE = 0x0094, + + /* + * TX Abort Feature + * ----------------------------------------------------------- + * Configuration : Disable Self CTS Enable Self CTS + * Values to set : 0 1 + * Configuration : Disable TX Abort Enable TX Abort + * Values to set : 2 3 + * Configuration : Enable HW TX Abort Enable SW TX Abort + * Values to set : 4 5 + * ----------------------------------------------------------- + */ + WID_TX_ABORT_CONFIG = 0x00A1, + + WID_REG_TSSI_11B_VALUE = 0x00A6, + WID_REG_TSSI_11G_VALUE = 0x00A7, + WID_REG_TSSI_11N_VALUE = 0x00A8, + WID_TX_CALIBRATION = 0x00A9, + WID_DSCR_TSSI_11B_VALUE = 0x00AA, + WID_DSCR_TSSI_11G_VALUE = 0x00AB, + WID_DSCR_TSSI_11N_VALUE = 0x00AC, + + /* + * Immediate Block-Ack Support + * ----------------------------------------------------------- + * Configuration : Disable Enable + * Values to set : 0 1 + * ----------------------------------------------------------- + */ + WID_11N_IMMEDIATE_BA_ENABLED = 0x00AF, + + /* + * TXOP Disable Flag + * ----------------------------------------------------------- + * Configuration : Disable Enable + * Values to set : 1 0 + * ----------------------------------------------------------- + */ + WID_11N_TXOP_PROT_DISABLE = 0x00B0, + + WID_TX_POWER_LEVEL_11N = 0x00B1, + + /* Custom Character WID list */ + WID_PC_TEST_MODE = 0x00C8, + /* SCAN Complete notification WID*/ + WID_SCAN_COMPLETE = 0x00C9, + + WID_DEL_BEACON = 0x00CA, + + WID_LOGTerminal_Switch = 0x00CD, + /* EMAC Short WID list */ + /* RTS Threshold */ + /* + * ----------------------------------------------------------- + * Configuration : Any value between 256 to 2347 + * Values to set : Same value. Default is 2347 + * ----------------------------------------------------------- + */ + WID_RTS_THRESHOLD = 0x1000, + + /* + * Fragmentation Threshold + * ----------------------------------------------------------- + * Configuration : Any value between 256 to 2346 + * Values to set : Same value. Default is 2346 + * ----------------------------------------------------------- + */ + WID_FRAG_THRESHOLD = 0x1001, + + WID_SHORT_RETRY_LIMIT = 0x1002, + WID_LONG_RETRY_LIMIT = 0x1003, + WID_BEACON_INTERVAL = 0x1006, + WID_MEMORY_ACCESS_16BIT = 0x1008, + WID_RX_SENSE = 0x100B, + WID_ACTIVE_SCAN_TIME = 0x100C, + WID_PASSIVE_SCAN_TIME = 0x100D, + + WID_SITE_SURVEY_SCAN_TIME = 0x100E, + WID_JOIN_START_TIMEOUT = 0x100F, + WID_AUTH_TIMEOUT = 0x1010, + WID_ASOC_TIMEOUT = 0x1011, + WID_11I_PROTOCOL_TIMEOUT = 0x1012, + WID_EAPOL_RESPONSE_TIMEOUT = 0x1013, + + /* NMAC Short WID list */ + WID_11N_SIG_QUAL_VAL = 0x1085, + WID_CCA_THRESHOLD = 0x1087, + + /* Custom Short WID list */ + + /* EMAC Integer WID list */ + WID_FAILED_COUNT = 0x2000, + WID_RETRY_COUNT = 0x2001, + WID_MULTIPLE_RETRY_COUNT = 0x2002, + WID_FRAME_DUPLICATE_COUNT = 0x2003, + WID_ACK_FAILURE_COUNT = 0x2004, + WID_RECEIVED_FRAGMENT_COUNT = 0x2005, + WID_MCAST_RECEIVED_FRAME_COUNT = 0x2006, + WID_FCS_ERROR_COUNT = 0x2007, + WID_SUCCESS_FRAME_COUNT = 0x2008, + WID_HUT_TX_COUNT = 0x200A, + WID_TX_FRAGMENT_COUNT = 0x200B, + WID_TX_MULTICAST_FRAME_COUNT = 0x200C, + WID_RTS_SUCCESS_COUNT = 0x200D, + WID_RTS_FAILURE_COUNT = 0x200E, + WID_WEP_UNDECRYPTABLE_COUNT = 0x200F, + WID_REKEY_PERIOD = 0x2010, + WID_REKEY_PACKET_COUNT = 0x2011, + WID_1X_SERV_ADDR = 0x2012, + WID_STACK_IP_ADDR = 0x2013, + WID_STACK_NETMASK_ADDR = 0x2014, + WID_HW_RX_COUNT = 0x2015, + WID_MEMORY_ADDRESS = 0x201E, + WID_MEMORY_ACCESS_32BIT = 0x201F, + WID_RF_REG_VAL = 0x2021, + + /* NMAC Integer WID list */ + WID_11N_PHY_ACTIVE_REG_VAL = 0x2080, + + /* Custom Integer WID list */ + WID_GET_INACTIVE_TIME = 0x2084, + WID_SET_DRV_HANDLER = 0X2085, + WID_SET_OPERATION_MODE = 0X2086, + /* EMAC String WID list */ + WID_SSID = 0x3000, + WID_FIRMWARE_VERSION = 0x3001, + WID_OPERATIONAL_RATE_SET = 0x3002, + WID_BSSID = 0x3003, + WID_WEP_KEY_VALUE = 0x3004, + WID_11I_PSK = 0x3008, + WID_11E_P_ACTION_REQ = 0x3009, + WID_1X_KEY = 0x300A, + WID_HARDWARE_VERSION = 0x300B, + WID_MAC_ADDR = 0x300C, + WID_HUT_DEST_ADDR = 0x300D, + WID_PHY_VERSION = 0x300F, + WID_SUPP_USERNAME = 0x3010, + WID_SUPP_PASSWORD = 0x3011, + WID_SITE_SURVEY_RESULTS = 0x3012, + WID_RX_POWER_LEVEL = 0x3013, + WID_DEL_ALL_RX_BA = 0x3014, + WID_SET_STA_MAC_INACTIVE_TIME = 0x3017, + WID_ADD_WEP_KEY = 0x3019, + WID_REMOVE_WEP_KEY = 0x301A, + WID_ADD_PTK = 0x301B, + WID_ADD_RX_GTK = 0x301C, + WID_ADD_TX_GTK = 0x301D, + WID_REMOVE_KEY = 0x301E, + WID_ASSOC_REQ_INFO = 0x301F, + WID_ASSOC_RES_INFO = 0x3020, + WID_MANUFACTURER = 0x3026, /*Added for CAPI tool */ + WID_MODEL_NAME = 0x3027, /*Added for CAPI tool */ + WID_MODEL_NUM = 0x3028, /*Added for CAPI tool */ + WID_DEVICE_NAME = 0x3029, /*Added for CAPI tool */ + + /* NMAC String WID list */ + WID_11N_P_ACTION_REQ = 0x3080, + WID_HUT_TEST_ID = 0x3081, + WID_PMKID_INFO = 0x3082, + WID_FIRMWARE_INFO = 0x3083, + WID_REGISTER_FRAME = 0x3084, + WID_DEL_ALL_STA = 0x3085, + WID_REMAIN_ON_CHAN = 0x3996, + WID_SSID_PROBE_REQ = 0x3997, + WID_JOIN_REQ_EXTENDED = 0x3998, + + WID_IP_ADDRESS = 0x3999, + + /* Custom String WID list */ + + /* EMAC Binary WID list */ + WID_UAPSD_CONFIG = 0x4001, + WID_UAPSD_STATUS = 0x4002, + WID_WMM_AP_AC_PARAMS = 0x4003, + WID_WMM_STA_AC_PARAMS = 0x4004, + WID_NETWORK_INFO = 0x4005, + WID_STA_JOIN_INFO = 0x4006, + WID_CONNECTED_STA_LIST = 0x4007, + + /* NMAC Binary WID list */ + WID_11N_AUTORATE_TABLE = 0x4080, + + WID_SCAN_CHANNEL_LIST = 0x4084, + + WID_INFO_ELEMENT_PROBE = 0x4085, + WID_INFO_ELEMENT_ASSOCIATE = 0x4086, + WID_ADD_STA = 0X4087, + WID_REMOVE_STA = 0X4088, + WID_EDIT_STA = 0X4089, + WID_ADD_BEACON = 0x408a, + + WID_SETUP_MULTICAST_FILTER = 0x408b, + + /* Miscellaneous WIDs */ + WID_ALL = 0x7FFE, + WID_MAX = 0xFFFF +} WID_T; + +int wilc_wlan_init(wilc_wlan_inp_t *inp); + +void wilc_bus_set_max_speed(void); +void wilc_bus_set_default_speed(void); +u32 wilc_get_chipid(u8 update); + +#endif |