diff options
Diffstat (limited to 'kernel/drivers/staging/sm750fb/ddk750_sii164.c')
| -rw-r--r-- | kernel/drivers/staging/sm750fb/ddk750_sii164.c | 408 |
1 files changed, 196 insertions, 212 deletions
diff --git a/kernel/drivers/staging/sm750fb/ddk750_sii164.c b/kernel/drivers/staging/sm750fb/ddk750_sii164.c index 3d224d6a7..241b77b92 100644 --- a/kernel/drivers/staging/sm750fb/ddk750_sii164.c +++ b/kernel/drivers/staging/sm750fb/ddk750_sii164.c @@ -11,8 +11,8 @@ #define USE_HW_I2C #ifdef USE_HW_I2C - #define i2cWriteReg hwI2CWriteReg - #define i2cReadReg hwI2CReadReg + #define i2cWriteReg sm750_hw_i2c_write_reg + #define i2cReadReg sm750_hw_i2c_read_reg #else #define i2cWriteReg swI2CWriteReg #define i2cReadReg swI2CReadReg @@ -36,12 +36,12 @@ static char *gDviCtrlChipName = "Silicon Image SiI 164"; */ unsigned short sii164GetVendorID(void) { - unsigned short vendorID; + unsigned short vendorID; - vendorID = ((unsigned short) i2cReadReg(SII164_I2C_ADDRESS, SII164_VENDOR_ID_HIGH) << 8) | - (unsigned short) i2cReadReg(SII164_I2C_ADDRESS, SII164_VENDOR_ID_LOW); + vendorID = ((unsigned short) i2cReadReg(SII164_I2C_ADDRESS, SII164_VENDOR_ID_HIGH) << 8) | + (unsigned short) i2cReadReg(SII164_I2C_ADDRESS, SII164_VENDOR_ID_LOW); - return vendorID; + return vendorID; } /* @@ -53,12 +53,12 @@ unsigned short sii164GetVendorID(void) */ unsigned short sii164GetDeviceID(void) { - unsigned short deviceID; + unsigned short deviceID; - deviceID = ((unsigned short) i2cReadReg(SII164_I2C_ADDRESS, SII164_DEVICE_ID_HIGH) << 8) | - (unsigned short) i2cReadReg(SII164_I2C_ADDRESS, SII164_DEVICE_ID_LOW); + deviceID = ((unsigned short) i2cReadReg(SII164_I2C_ADDRESS, SII164_DEVICE_ID_HIGH) << 8) | + (unsigned short) i2cReadReg(SII164_I2C_ADDRESS, SII164_DEVICE_ID_LOW); - return deviceID; + return deviceID; } @@ -113,150 +113,137 @@ unsigned short sii164GetDeviceID(void) * -1 - Fail. */ long sii164InitChip( - unsigned char edgeSelect, - unsigned char busSelect, - unsigned char dualEdgeClkSelect, - unsigned char hsyncEnable, - unsigned char vsyncEnable, - unsigned char deskewEnable, - unsigned char deskewSetting, - unsigned char continuousSyncEnable, - unsigned char pllFilterEnable, - unsigned char pllFilterValue + unsigned char edgeSelect, + unsigned char busSelect, + unsigned char dualEdgeClkSelect, + unsigned char hsyncEnable, + unsigned char vsyncEnable, + unsigned char deskewEnable, + unsigned char deskewSetting, + unsigned char continuousSyncEnable, + unsigned char pllFilterEnable, + unsigned char pllFilterValue ) { - //unsigned char ucRegIndex, ucRegValue; - //unsigned char ucDeviceAddress, unsigned char config; - //unsigned long delayCount; - /* Initialize the i2c bus */ + /* Initialize the i2c bus */ #ifdef USE_HW_I2C - /* Use fast mode. */ - hwI2CInit(1); + /* Use fast mode. */ + sm750_hw_i2c_init(1); #else - swI2CInit(DEFAULT_I2C_SCL, DEFAULT_I2C_SDA); + sm750_sw_i2c_init(DEFAULT_I2C_SCL, DEFAULT_I2C_SDA); #endif - /* Check if SII164 Chip exists */ - if ((sii164GetVendorID() == SII164_VENDOR_ID) && (sii164GetDeviceID() == SII164_DEVICE_ID)) - { - -#ifdef DDKDEBUG - //sii164PrintRegisterValues(); -#endif - /* - * Initialize SII164 controller chip. - */ - - /* Select the edge */ - if (edgeSelect == 0) - config = SII164_CONFIGURATION_LATCH_FALLING; - else - config = SII164_CONFIGURATION_LATCH_RISING; - - /* Select bus wide */ - if (busSelect == 0) - config |= SII164_CONFIGURATION_BUS_12BITS; - else - config |= SII164_CONFIGURATION_BUS_24BITS; - - /* Select Dual/Single Edge Clock */ - if (dualEdgeClkSelect == 0) - config |= SII164_CONFIGURATION_CLOCK_SINGLE; - else - config |= SII164_CONFIGURATION_CLOCK_DUAL; - - /* Select HSync Enable */ - if (hsyncEnable == 0) - config |= SII164_CONFIGURATION_HSYNC_FORCE_LOW; - else - config |= SII164_CONFIGURATION_HSYNC_AS_IS; - - /* Select VSync Enable */ - if (vsyncEnable == 0) - config |= SII164_CONFIGURATION_VSYNC_FORCE_LOW; - else - config |= SII164_CONFIGURATION_VSYNC_AS_IS; - - i2cWriteReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config); - - /* De-skew enabled with default 111b value. - This will fix some artifacts problem in some mode on board 2.2. - Somehow this fix does not affect board 2.1. - */ - if (deskewEnable == 0) - config = SII164_DESKEW_DISABLE; - else - config = SII164_DESKEW_ENABLE; - - switch (deskewSetting) - { - case 0: - config |= SII164_DESKEW_1_STEP; - break; - case 1: - config |= SII164_DESKEW_2_STEP; - break; - case 2: - config |= SII164_DESKEW_3_STEP; - break; - case 3: - config |= SII164_DESKEW_4_STEP; - break; - case 4: - config |= SII164_DESKEW_5_STEP; - break; - case 5: - config |= SII164_DESKEW_6_STEP; - break; - case 6: - config |= SII164_DESKEW_7_STEP; - break; - case 7: - config |= SII164_DESKEW_8_STEP; - break; - } - i2cWriteReg(SII164_I2C_ADDRESS, SII164_DESKEW, config); - - /* Enable/Disable Continuous Sync. */ - if (continuousSyncEnable == 0) - config = SII164_PLL_FILTER_SYNC_CONTINUOUS_DISABLE; - else - config = SII164_PLL_FILTER_SYNC_CONTINUOUS_ENABLE; - - /* Enable/Disable PLL Filter */ - if (pllFilterEnable == 0) - config |= SII164_PLL_FILTER_DISABLE; - else - config |= SII164_PLL_FILTER_ENABLE; - - /* Set the PLL Filter value */ - config |= ((pllFilterValue & 0x07) << 1); - - i2cWriteReg(SII164_I2C_ADDRESS, SII164_PLL, config); - - /* Recover from Power Down and enable output. */ - config = i2cReadReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION); - config |= SII164_CONFIGURATION_POWER_NORMAL; - i2cWriteReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config); - -#ifdef DDKDEBUG - //sii164PrintRegisterValues(); -#endif - - return 0; - } - - /* Return -1 if initialization fails. */ - return (-1); + /* Check if SII164 Chip exists */ + if ((sii164GetVendorID() == SII164_VENDOR_ID) && (sii164GetDeviceID() == SII164_DEVICE_ID)) { + /* + * Initialize SII164 controller chip. + */ + + /* Select the edge */ + if (edgeSelect == 0) + config = SII164_CONFIGURATION_LATCH_FALLING; + else + config = SII164_CONFIGURATION_LATCH_RISING; + + /* Select bus wide */ + if (busSelect == 0) + config |= SII164_CONFIGURATION_BUS_12BITS; + else + config |= SII164_CONFIGURATION_BUS_24BITS; + + /* Select Dual/Single Edge Clock */ + if (dualEdgeClkSelect == 0) + config |= SII164_CONFIGURATION_CLOCK_SINGLE; + else + config |= SII164_CONFIGURATION_CLOCK_DUAL; + + /* Select HSync Enable */ + if (hsyncEnable == 0) + config |= SII164_CONFIGURATION_HSYNC_FORCE_LOW; + else + config |= SII164_CONFIGURATION_HSYNC_AS_IS; + + /* Select VSync Enable */ + if (vsyncEnable == 0) + config |= SII164_CONFIGURATION_VSYNC_FORCE_LOW; + else + config |= SII164_CONFIGURATION_VSYNC_AS_IS; + + i2cWriteReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config); + + /* De-skew enabled with default 111b value. + This will fix some artifacts problem in some mode on board 2.2. + Somehow this fix does not affect board 2.1. + */ + if (deskewEnable == 0) + config = SII164_DESKEW_DISABLE; + else + config = SII164_DESKEW_ENABLE; + + switch (deskewSetting) { + case 0: + config |= SII164_DESKEW_1_STEP; + break; + case 1: + config |= SII164_DESKEW_2_STEP; + break; + case 2: + config |= SII164_DESKEW_3_STEP; + break; + case 3: + config |= SII164_DESKEW_4_STEP; + break; + case 4: + config |= SII164_DESKEW_5_STEP; + break; + case 5: + config |= SII164_DESKEW_6_STEP; + break; + case 6: + config |= SII164_DESKEW_7_STEP; + break; + case 7: + config |= SII164_DESKEW_8_STEP; + break; + } + i2cWriteReg(SII164_I2C_ADDRESS, SII164_DESKEW, config); + + /* Enable/Disable Continuous Sync. */ + if (continuousSyncEnable == 0) + config = SII164_PLL_FILTER_SYNC_CONTINUOUS_DISABLE; + else + config = SII164_PLL_FILTER_SYNC_CONTINUOUS_ENABLE; + + /* Enable/Disable PLL Filter */ + if (pllFilterEnable == 0) + config |= SII164_PLL_FILTER_DISABLE; + else + config |= SII164_PLL_FILTER_ENABLE; + + /* Set the PLL Filter value */ + config |= ((pllFilterValue & 0x07) << 1); + + i2cWriteReg(SII164_I2C_ADDRESS, SII164_PLL, config); + + /* Recover from Power Down and enable output. */ + config = i2cReadReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION); + config |= SII164_CONFIGURATION_POWER_NORMAL; + i2cWriteReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config); + + return 0; + } + + /* Return -1 if initialization fails. */ + return (-1); } -/* below sii164 function is not neccessary */ +/* below sii164 function is not necessary */ #ifdef SII164_FULL_FUNCTIONS @@ -266,9 +253,9 @@ long sii164InitChip( */ void sii164ResetChip(void) { - /* Power down */ - sii164SetPower(0); - sii164SetPower(1); + /* Power down */ + sii164SetPower(0); + sii164SetPower(1); } @@ -279,7 +266,7 @@ void sii164ResetChip(void) */ char *sii164GetChipString(void) { - return gDviCtrlChipName; + return gDviCtrlChipName; } @@ -291,26 +278,23 @@ char *sii164GetChipString(void) * powerUp - Flag to set the power down or up */ void sii164SetPower( - unsigned char powerUp + unsigned char powerUp ) { - unsigned char config; - - config = i2cReadReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION); - if (powerUp == 1) - { - /* Power up the chip */ - config &= ~SII164_CONFIGURATION_POWER_MASK; - config |= SII164_CONFIGURATION_POWER_NORMAL; - i2cWriteReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config); - } - else - { - /* Power down the chip */ - config &= ~SII164_CONFIGURATION_POWER_MASK; - config |= SII164_CONFIGURATION_POWER_DOWN; - i2cWriteReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config); - } + unsigned char config; + + config = i2cReadReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION); + if (powerUp == 1) { + /* Power up the chip */ + config &= ~SII164_CONFIGURATION_POWER_MASK; + config |= SII164_CONFIGURATION_POWER_NORMAL; + i2cWriteReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config); + } else { + /* Power down the chip */ + config &= ~SII164_CONFIGURATION_POWER_MASK; + config |= SII164_CONFIGURATION_POWER_DOWN; + i2cWriteReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config); + } } @@ -319,31 +303,30 @@ void sii164SetPower( * This function selects the mode of the hot plug detection. */ static void sii164SelectHotPlugDetectionMode( - sii164_hot_plug_mode_t hotPlugMode + sii164_hot_plug_mode_t hotPlugMode ) { - unsigned char detectReg; - - detectReg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT) & ~SII164_DETECT_MONITOR_SENSE_OUTPUT_FLAG; - switch (hotPlugMode) - { - case SII164_HOTPLUG_DISABLE: - detectReg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_HIGH; - break; - case SII164_HOTPLUG_USE_MDI: - detectReg &= ~SII164_DETECT_INTERRUPT_MASK; - detectReg |= SII164_DETECT_INTERRUPT_BY_HTPLG_PIN; - detectReg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_MDI; - break; - case SII164_HOTPLUG_USE_RSEN: - detectReg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_RSEN; - break; - case SII164_HOTPLUG_USE_HTPLG: - detectReg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_HTPLG; - break; - } - - i2cWriteReg(SII164_I2C_ADDRESS, SII164_DETECT, detectReg); + unsigned char detectReg; + + detectReg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT) & ~SII164_DETECT_MONITOR_SENSE_OUTPUT_FLAG; + switch (hotPlugMode) { + case SII164_HOTPLUG_DISABLE: + detectReg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_HIGH; + break; + case SII164_HOTPLUG_USE_MDI: + detectReg &= ~SII164_DETECT_INTERRUPT_MASK; + detectReg |= SII164_DETECT_INTERRUPT_BY_HTPLG_PIN; + detectReg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_MDI; + break; + case SII164_HOTPLUG_USE_RSEN: + detectReg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_RSEN; + break; + case SII164_HOTPLUG_USE_HTPLG: + detectReg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_HTPLG; + break; + } + + i2cWriteReg(SII164_I2C_ADDRESS, SII164_DETECT, detectReg); } /* @@ -353,18 +336,19 @@ static void sii164SelectHotPlugDetectionMode( * enableHotPlug - Enable (=1) / disable (=0) Hot Plug detection */ void sii164EnableHotPlugDetection( - unsigned char enableHotPlug + unsigned char enableHotPlug ) { - unsigned char detectReg; - detectReg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT); - - /* Depending on each DVI controller, need to enable the hot plug based on each - individual chip design. */ - if (enableHotPlug != 0) - sii164SelectHotPlugDetectionMode(SII164_HOTPLUG_USE_MDI); - else - sii164SelectHotPlugDetectionMode(SII164_HOTPLUG_DISABLE); + unsigned char detectReg; + + detectReg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT); + + /* Depending on each DVI controller, need to enable the hot plug based on each + individual chip design. */ + if (enableHotPlug != 0) + sii164SelectHotPlugDetectionMode(SII164_HOTPLUG_USE_MDI); + else + sii164SelectHotPlugDetectionMode(SII164_HOTPLUG_DISABLE); } /* @@ -377,18 +361,18 @@ void sii164EnableHotPlugDetection( */ unsigned char sii164IsConnected(void) { - unsigned char hotPlugValue; + unsigned char hotPlugValue; - hotPlugValue = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT) & SII164_DETECT_HOT_PLUG_STATUS_MASK; - if (hotPlugValue == SII164_DETECT_HOT_PLUG_STATUS_ON) - return 1; - else - return 0; + hotPlugValue = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT) & SII164_DETECT_HOT_PLUG_STATUS_MASK; + if (hotPlugValue == SII164_DETECT_HOT_PLUG_STATUS_ON) + return 1; + else + return 0; } /* * sii164CheckInterrupt - * Checks if interrupt has occured. + * Checks if interrupt has occurred. * * Output: * 0 - No interrupt @@ -396,13 +380,13 @@ unsigned char sii164IsConnected(void) */ unsigned char sii164CheckInterrupt(void) { - unsigned char detectReg; + unsigned char detectReg; - detectReg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT) & SII164_DETECT_MONITOR_STATE_MASK; - if (detectReg == SII164_DETECT_MONITOR_STATE_CHANGE) - return 1; - else - return 0; + detectReg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT) & SII164_DETECT_MONITOR_STATE_MASK; + if (detectReg == SII164_DETECT_MONITOR_STATE_CHANGE) + return 1; + else + return 0; } /* @@ -411,11 +395,11 @@ unsigned char sii164CheckInterrupt(void) */ void sii164ClearInterrupt(void) { - unsigned char detectReg; + unsigned char detectReg; - /* Clear the MDI interrupt */ - detectReg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT); - i2cWriteReg(SII164_I2C_ADDRESS, SII164_DETECT, detectReg | SII164_DETECT_MONITOR_STATE_CLEAR); + /* Clear the MDI interrupt */ + detectReg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT); + i2cWriteReg(SII164_I2C_ADDRESS, SII164_DETECT, detectReg | SII164_DETECT_MONITOR_STATE_CLEAR); } #endif |