summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/spi/spi-atmel.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/spi/spi-atmel.c')
-rw-r--r--kernel/drivers/spi/spi-atmel.c1540
1 files changed, 1540 insertions, 0 deletions
diff --git a/kernel/drivers/spi/spi-atmel.c b/kernel/drivers/spi/spi-atmel.c
new file mode 100644
index 000000000..a2f40b1b2
--- /dev/null
+++ b/kernel/drivers/spi/spi-atmel.c
@@ -0,0 +1,1540 @@
+/*
+ * Driver for Atmel AT32 and AT91 SPI Controllers
+ *
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/spi/spi.h>
+#include <linux/slab.h>
+#include <linux/platform_data/atmel.h>
+#include <linux/platform_data/dma-atmel.h>
+#include <linux/of.h>
+
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/pm_runtime.h>
+
+/* SPI register offsets */
+#define SPI_CR 0x0000
+#define SPI_MR 0x0004
+#define SPI_RDR 0x0008
+#define SPI_TDR 0x000c
+#define SPI_SR 0x0010
+#define SPI_IER 0x0014
+#define SPI_IDR 0x0018
+#define SPI_IMR 0x001c
+#define SPI_CSR0 0x0030
+#define SPI_CSR1 0x0034
+#define SPI_CSR2 0x0038
+#define SPI_CSR3 0x003c
+#define SPI_VERSION 0x00fc
+#define SPI_RPR 0x0100
+#define SPI_RCR 0x0104
+#define SPI_TPR 0x0108
+#define SPI_TCR 0x010c
+#define SPI_RNPR 0x0110
+#define SPI_RNCR 0x0114
+#define SPI_TNPR 0x0118
+#define SPI_TNCR 0x011c
+#define SPI_PTCR 0x0120
+#define SPI_PTSR 0x0124
+
+/* Bitfields in CR */
+#define SPI_SPIEN_OFFSET 0
+#define SPI_SPIEN_SIZE 1
+#define SPI_SPIDIS_OFFSET 1
+#define SPI_SPIDIS_SIZE 1
+#define SPI_SWRST_OFFSET 7
+#define SPI_SWRST_SIZE 1
+#define SPI_LASTXFER_OFFSET 24
+#define SPI_LASTXFER_SIZE 1
+
+/* Bitfields in MR */
+#define SPI_MSTR_OFFSET 0
+#define SPI_MSTR_SIZE 1
+#define SPI_PS_OFFSET 1
+#define SPI_PS_SIZE 1
+#define SPI_PCSDEC_OFFSET 2
+#define SPI_PCSDEC_SIZE 1
+#define SPI_FDIV_OFFSET 3
+#define SPI_FDIV_SIZE 1
+#define SPI_MODFDIS_OFFSET 4
+#define SPI_MODFDIS_SIZE 1
+#define SPI_WDRBT_OFFSET 5
+#define SPI_WDRBT_SIZE 1
+#define SPI_LLB_OFFSET 7
+#define SPI_LLB_SIZE 1
+#define SPI_PCS_OFFSET 16
+#define SPI_PCS_SIZE 4
+#define SPI_DLYBCS_OFFSET 24
+#define SPI_DLYBCS_SIZE 8
+
+/* Bitfields in RDR */
+#define SPI_RD_OFFSET 0
+#define SPI_RD_SIZE 16
+
+/* Bitfields in TDR */
+#define SPI_TD_OFFSET 0
+#define SPI_TD_SIZE 16
+
+/* Bitfields in SR */
+#define SPI_RDRF_OFFSET 0
+#define SPI_RDRF_SIZE 1
+#define SPI_TDRE_OFFSET 1
+#define SPI_TDRE_SIZE 1
+#define SPI_MODF_OFFSET 2
+#define SPI_MODF_SIZE 1
+#define SPI_OVRES_OFFSET 3
+#define SPI_OVRES_SIZE 1
+#define SPI_ENDRX_OFFSET 4
+#define SPI_ENDRX_SIZE 1
+#define SPI_ENDTX_OFFSET 5
+#define SPI_ENDTX_SIZE 1
+#define SPI_RXBUFF_OFFSET 6
+#define SPI_RXBUFF_SIZE 1
+#define SPI_TXBUFE_OFFSET 7
+#define SPI_TXBUFE_SIZE 1
+#define SPI_NSSR_OFFSET 8
+#define SPI_NSSR_SIZE 1
+#define SPI_TXEMPTY_OFFSET 9
+#define SPI_TXEMPTY_SIZE 1
+#define SPI_SPIENS_OFFSET 16
+#define SPI_SPIENS_SIZE 1
+
+/* Bitfields in CSR0 */
+#define SPI_CPOL_OFFSET 0
+#define SPI_CPOL_SIZE 1
+#define SPI_NCPHA_OFFSET 1
+#define SPI_NCPHA_SIZE 1
+#define SPI_CSAAT_OFFSET 3
+#define SPI_CSAAT_SIZE 1
+#define SPI_BITS_OFFSET 4
+#define SPI_BITS_SIZE 4
+#define SPI_SCBR_OFFSET 8
+#define SPI_SCBR_SIZE 8
+#define SPI_DLYBS_OFFSET 16
+#define SPI_DLYBS_SIZE 8
+#define SPI_DLYBCT_OFFSET 24
+#define SPI_DLYBCT_SIZE 8
+
+/* Bitfields in RCR */
+#define SPI_RXCTR_OFFSET 0
+#define SPI_RXCTR_SIZE 16
+
+/* Bitfields in TCR */
+#define SPI_TXCTR_OFFSET 0
+#define SPI_TXCTR_SIZE 16
+
+/* Bitfields in RNCR */
+#define SPI_RXNCR_OFFSET 0
+#define SPI_RXNCR_SIZE 16
+
+/* Bitfields in TNCR */
+#define SPI_TXNCR_OFFSET 0
+#define SPI_TXNCR_SIZE 16
+
+/* Bitfields in PTCR */
+#define SPI_RXTEN_OFFSET 0
+#define SPI_RXTEN_SIZE 1
+#define SPI_RXTDIS_OFFSET 1
+#define SPI_RXTDIS_SIZE 1
+#define SPI_TXTEN_OFFSET 8
+#define SPI_TXTEN_SIZE 1
+#define SPI_TXTDIS_OFFSET 9
+#define SPI_TXTDIS_SIZE 1
+
+/* Constants for BITS */
+#define SPI_BITS_8_BPT 0
+#define SPI_BITS_9_BPT 1
+#define SPI_BITS_10_BPT 2
+#define SPI_BITS_11_BPT 3
+#define SPI_BITS_12_BPT 4
+#define SPI_BITS_13_BPT 5
+#define SPI_BITS_14_BPT 6
+#define SPI_BITS_15_BPT 7
+#define SPI_BITS_16_BPT 8
+
+/* Bit manipulation macros */
+#define SPI_BIT(name) \
+ (1 << SPI_##name##_OFFSET)
+#define SPI_BF(name, value) \
+ (((value) & ((1 << SPI_##name##_SIZE) - 1)) << SPI_##name##_OFFSET)
+#define SPI_BFEXT(name, value) \
+ (((value) >> SPI_##name##_OFFSET) & ((1 << SPI_##name##_SIZE) - 1))
+#define SPI_BFINS(name, value, old) \
+ (((old) & ~(((1 << SPI_##name##_SIZE) - 1) << SPI_##name##_OFFSET)) \
+ | SPI_BF(name, value))
+
+/* Register access macros */
+#ifdef CONFIG_AVR32
+#define spi_readl(port, reg) \
+ __raw_readl((port)->regs + SPI_##reg)
+#define spi_writel(port, reg, value) \
+ __raw_writel((value), (port)->regs + SPI_##reg)
+#else
+#define spi_readl(port, reg) \
+ readl_relaxed((port)->regs + SPI_##reg)
+#define spi_writel(port, reg, value) \
+ writel_relaxed((value), (port)->regs + SPI_##reg)
+#endif
+/* use PIO for small transfers, avoiding DMA setup/teardown overhead and
+ * cache operations; better heuristics consider wordsize and bitrate.
+ */
+#define DMA_MIN_BYTES 16
+
+#define SPI_DMA_TIMEOUT (msecs_to_jiffies(1000))
+
+#define AUTOSUSPEND_TIMEOUT 2000
+
+struct atmel_spi_dma {
+ struct dma_chan *chan_rx;
+ struct dma_chan *chan_tx;
+ struct scatterlist sgrx;
+ struct scatterlist sgtx;
+ struct dma_async_tx_descriptor *data_desc_rx;
+ struct dma_async_tx_descriptor *data_desc_tx;
+
+ struct at_dma_slave dma_slave;
+};
+
+struct atmel_spi_caps {
+ bool is_spi2;
+ bool has_wdrbt;
+ bool has_dma_support;
+};
+
+/*
+ * The core SPI transfer engine just talks to a register bank to set up
+ * DMA transfers; transfer queue progress is driven by IRQs. The clock
+ * framework provides the base clock, subdivided for each spi_device.
+ */
+struct atmel_spi {
+ spinlock_t lock;
+ unsigned long flags;
+
+ phys_addr_t phybase;
+ void __iomem *regs;
+ int irq;
+ struct clk *clk;
+ struct platform_device *pdev;
+
+ struct spi_transfer *current_transfer;
+ int current_remaining_bytes;
+ int done_status;
+
+ struct completion xfer_completion;
+
+ /* scratch buffer */
+ void *buffer;
+ dma_addr_t buffer_dma;
+
+ struct atmel_spi_caps caps;
+
+ bool use_dma;
+ bool use_pdc;
+ /* dmaengine data */
+ struct atmel_spi_dma dma;
+
+ bool keep_cs;
+ bool cs_active;
+};
+
+/* Controller-specific per-slave state */
+struct atmel_spi_device {
+ unsigned int npcs_pin;
+ u32 csr;
+};
+
+#define BUFFER_SIZE PAGE_SIZE
+#define INVALID_DMA_ADDRESS 0xffffffff
+
+/*
+ * Version 2 of the SPI controller has
+ * - CR.LASTXFER
+ * - SPI_MR.DIV32 may become FDIV or must-be-zero (here: always zero)
+ * - SPI_SR.TXEMPTY, SPI_SR.NSSR (and corresponding irqs)
+ * - SPI_CSRx.CSAAT
+ * - SPI_CSRx.SBCR allows faster clocking
+ */
+static bool atmel_spi_is_v2(struct atmel_spi *as)
+{
+ return as->caps.is_spi2;
+}
+
+/*
+ * Earlier SPI controllers (e.g. on at91rm9200) have a design bug whereby
+ * they assume that spi slave device state will not change on deselect, so
+ * that automagic deselection is OK. ("NPCSx rises if no data is to be
+ * transmitted") Not so! Workaround uses nCSx pins as GPIOs; or newer
+ * controllers have CSAAT and friends.
+ *
+ * Since the CSAAT functionality is a bit weird on newer controllers as
+ * well, we use GPIO to control nCSx pins on all controllers, updating
+ * MR.PCS to avoid confusing the controller. Using GPIOs also lets us
+ * support active-high chipselects despite the controller's belief that
+ * only active-low devices/systems exists.
+ *
+ * However, at91rm9200 has a second erratum whereby nCS0 doesn't work
+ * right when driven with GPIO. ("Mode Fault does not allow more than one
+ * Master on Chip Select 0.") No workaround exists for that ... so for
+ * nCS0 on that chip, we (a) don't use the GPIO, (b) can't support CS_HIGH,
+ * and (c) will trigger that first erratum in some cases.
+ */
+
+static void cs_activate(struct atmel_spi *as, struct spi_device *spi)
+{
+ struct atmel_spi_device *asd = spi->controller_state;
+ unsigned active = spi->mode & SPI_CS_HIGH;
+ u32 mr;
+
+ if (atmel_spi_is_v2(as)) {
+ spi_writel(as, CSR0 + 4 * spi->chip_select, asd->csr);
+ /* For the low SPI version, there is a issue that PDC transfer
+ * on CS1,2,3 needs SPI_CSR0.BITS config as SPI_CSR1,2,3.BITS
+ */
+ spi_writel(as, CSR0, asd->csr);
+ if (as->caps.has_wdrbt) {
+ spi_writel(as, MR,
+ SPI_BF(PCS, ~(0x01 << spi->chip_select))
+ | SPI_BIT(WDRBT)
+ | SPI_BIT(MODFDIS)
+ | SPI_BIT(MSTR));
+ } else {
+ spi_writel(as, MR,
+ SPI_BF(PCS, ~(0x01 << spi->chip_select))
+ | SPI_BIT(MODFDIS)
+ | SPI_BIT(MSTR));
+ }
+
+ mr = spi_readl(as, MR);
+ gpio_set_value(asd->npcs_pin, active);
+ } else {
+ u32 cpol = (spi->mode & SPI_CPOL) ? SPI_BIT(CPOL) : 0;
+ int i;
+ u32 csr;
+
+ /* Make sure clock polarity is correct */
+ for (i = 0; i < spi->master->num_chipselect; i++) {
+ csr = spi_readl(as, CSR0 + 4 * i);
+ if ((csr ^ cpol) & SPI_BIT(CPOL))
+ spi_writel(as, CSR0 + 4 * i,
+ csr ^ SPI_BIT(CPOL));
+ }
+
+ mr = spi_readl(as, MR);
+ mr = SPI_BFINS(PCS, ~(1 << spi->chip_select), mr);
+ if (spi->chip_select != 0)
+ gpio_set_value(asd->npcs_pin, active);
+ spi_writel(as, MR, mr);
+ }
+
+ dev_dbg(&spi->dev, "activate %u%s, mr %08x\n",
+ asd->npcs_pin, active ? " (high)" : "",
+ mr);
+}
+
+static void cs_deactivate(struct atmel_spi *as, struct spi_device *spi)
+{
+ struct atmel_spi_device *asd = spi->controller_state;
+ unsigned active = spi->mode & SPI_CS_HIGH;
+ u32 mr;
+
+ /* only deactivate *this* device; sometimes transfers to
+ * another device may be active when this routine is called.
+ */
+ mr = spi_readl(as, MR);
+ if (~SPI_BFEXT(PCS, mr) & (1 << spi->chip_select)) {
+ mr = SPI_BFINS(PCS, 0xf, mr);
+ spi_writel(as, MR, mr);
+ }
+
+ dev_dbg(&spi->dev, "DEactivate %u%s, mr %08x\n",
+ asd->npcs_pin, active ? " (low)" : "",
+ mr);
+
+ if (atmel_spi_is_v2(as) || spi->chip_select != 0)
+ gpio_set_value(asd->npcs_pin, !active);
+}
+
+static void atmel_spi_lock(struct atmel_spi *as) __acquires(&as->lock)
+{
+ spin_lock_irqsave(&as->lock, as->flags);
+}
+
+static void atmel_spi_unlock(struct atmel_spi *as) __releases(&as->lock)
+{
+ spin_unlock_irqrestore(&as->lock, as->flags);
+}
+
+static inline bool atmel_spi_use_dma(struct atmel_spi *as,
+ struct spi_transfer *xfer)
+{
+ return as->use_dma && xfer->len >= DMA_MIN_BYTES;
+}
+
+static int atmel_spi_dma_slave_config(struct atmel_spi *as,
+ struct dma_slave_config *slave_config,
+ u8 bits_per_word)
+{
+ int err = 0;
+
+ if (bits_per_word > 8) {
+ slave_config->dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
+ slave_config->src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
+ } else {
+ slave_config->dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ slave_config->src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ }
+
+ slave_config->dst_addr = (dma_addr_t)as->phybase + SPI_TDR;
+ slave_config->src_addr = (dma_addr_t)as->phybase + SPI_RDR;
+ slave_config->src_maxburst = 1;
+ slave_config->dst_maxburst = 1;
+ slave_config->device_fc = false;
+
+ slave_config->direction = DMA_MEM_TO_DEV;
+ if (dmaengine_slave_config(as->dma.chan_tx, slave_config)) {
+ dev_err(&as->pdev->dev,
+ "failed to configure tx dma channel\n");
+ err = -EINVAL;
+ }
+
+ slave_config->direction = DMA_DEV_TO_MEM;
+ if (dmaengine_slave_config(as->dma.chan_rx, slave_config)) {
+ dev_err(&as->pdev->dev,
+ "failed to configure rx dma channel\n");
+ err = -EINVAL;
+ }
+
+ return err;
+}
+
+static int atmel_spi_configure_dma(struct atmel_spi *as)
+{
+ struct dma_slave_config slave_config;
+ struct device *dev = &as->pdev->dev;
+ int err;
+
+ dma_cap_mask_t mask;
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+
+ as->dma.chan_tx = dma_request_slave_channel_reason(dev, "tx");
+ if (IS_ERR(as->dma.chan_tx)) {
+ err = PTR_ERR(as->dma.chan_tx);
+ if (err == -EPROBE_DEFER) {
+ dev_warn(dev, "no DMA channel available at the moment\n");
+ return err;
+ }
+ dev_err(dev,
+ "DMA TX channel not available, SPI unable to use DMA\n");
+ err = -EBUSY;
+ goto error;
+ }
+
+ /*
+ * No reason to check EPROBE_DEFER here since we have already requested
+ * tx channel. If it fails here, it's for another reason.
+ */
+ as->dma.chan_rx = dma_request_slave_channel(dev, "rx");
+
+ if (!as->dma.chan_rx) {
+ dev_err(dev,
+ "DMA RX channel not available, SPI unable to use DMA\n");
+ err = -EBUSY;
+ goto error;
+ }
+
+ err = atmel_spi_dma_slave_config(as, &slave_config, 8);
+ if (err)
+ goto error;
+
+ dev_info(&as->pdev->dev,
+ "Using %s (tx) and %s (rx) for DMA transfers\n",
+ dma_chan_name(as->dma.chan_tx),
+ dma_chan_name(as->dma.chan_rx));
+ return 0;
+error:
+ if (as->dma.chan_rx)
+ dma_release_channel(as->dma.chan_rx);
+ if (!IS_ERR(as->dma.chan_tx))
+ dma_release_channel(as->dma.chan_tx);
+ return err;
+}
+
+static void atmel_spi_stop_dma(struct atmel_spi *as)
+{
+ if (as->dma.chan_rx)
+ dmaengine_terminate_all(as->dma.chan_rx);
+ if (as->dma.chan_tx)
+ dmaengine_terminate_all(as->dma.chan_tx);
+}
+
+static void atmel_spi_release_dma(struct atmel_spi *as)
+{
+ if (as->dma.chan_rx)
+ dma_release_channel(as->dma.chan_rx);
+ if (as->dma.chan_tx)
+ dma_release_channel(as->dma.chan_tx);
+}
+
+/* This function is called by the DMA driver from tasklet context */
+static void dma_callback(void *data)
+{
+ struct spi_master *master = data;
+ struct atmel_spi *as = spi_master_get_devdata(master);
+
+ complete(&as->xfer_completion);
+}
+
+/*
+ * Next transfer using PIO.
+ */
+static void atmel_spi_next_xfer_pio(struct spi_master *master,
+ struct spi_transfer *xfer)
+{
+ struct atmel_spi *as = spi_master_get_devdata(master);
+ unsigned long xfer_pos = xfer->len - as->current_remaining_bytes;
+
+ dev_vdbg(master->dev.parent, "atmel_spi_next_xfer_pio\n");
+
+ /* Make sure data is not remaining in RDR */
+ spi_readl(as, RDR);
+ while (spi_readl(as, SR) & SPI_BIT(RDRF)) {
+ spi_readl(as, RDR);
+ cpu_relax();
+ }
+
+ if (xfer->tx_buf) {
+ if (xfer->bits_per_word > 8)
+ spi_writel(as, TDR, *(u16 *)(xfer->tx_buf + xfer_pos));
+ else
+ spi_writel(as, TDR, *(u8 *)(xfer->tx_buf + xfer_pos));
+ } else {
+ spi_writel(as, TDR, 0);
+ }
+
+ dev_dbg(master->dev.parent,
+ " start pio xfer %p: len %u tx %p rx %p bitpw %d\n",
+ xfer, xfer->len, xfer->tx_buf, xfer->rx_buf,
+ xfer->bits_per_word);
+
+ /* Enable relevant interrupts */
+ spi_writel(as, IER, SPI_BIT(RDRF) | SPI_BIT(OVRES));
+}
+
+/*
+ * Submit next transfer for DMA.
+ */
+static int atmel_spi_next_xfer_dma_submit(struct spi_master *master,
+ struct spi_transfer *xfer,
+ u32 *plen)
+{
+ struct atmel_spi *as = spi_master_get_devdata(master);
+ struct dma_chan *rxchan = as->dma.chan_rx;
+ struct dma_chan *txchan = as->dma.chan_tx;
+ struct dma_async_tx_descriptor *rxdesc;
+ struct dma_async_tx_descriptor *txdesc;
+ struct dma_slave_config slave_config;
+ dma_cookie_t cookie;
+ u32 len = *plen;
+
+ dev_vdbg(master->dev.parent, "atmel_spi_next_xfer_dma_submit\n");
+
+ /* Check that the channels are available */
+ if (!rxchan || !txchan)
+ return -ENODEV;
+
+ /* release lock for DMA operations */
+ atmel_spi_unlock(as);
+
+ /* prepare the RX dma transfer */
+ sg_init_table(&as->dma.sgrx, 1);
+ if (xfer->rx_buf) {
+ as->dma.sgrx.dma_address = xfer->rx_dma + xfer->len - *plen;
+ } else {
+ as->dma.sgrx.dma_address = as->buffer_dma;
+ if (len > BUFFER_SIZE)
+ len = BUFFER_SIZE;
+ }
+
+ /* prepare the TX dma transfer */
+ sg_init_table(&as->dma.sgtx, 1);
+ if (xfer->tx_buf) {
+ as->dma.sgtx.dma_address = xfer->tx_dma + xfer->len - *plen;
+ } else {
+ as->dma.sgtx.dma_address = as->buffer_dma;
+ if (len > BUFFER_SIZE)
+ len = BUFFER_SIZE;
+ memset(as->buffer, 0, len);
+ }
+
+ sg_dma_len(&as->dma.sgtx) = len;
+ sg_dma_len(&as->dma.sgrx) = len;
+
+ *plen = len;
+
+ if (atmel_spi_dma_slave_config(as, &slave_config, 8))
+ goto err_exit;
+
+ /* Send both scatterlists */
+ rxdesc = dmaengine_prep_slave_sg(rxchan, &as->dma.sgrx, 1,
+ DMA_FROM_DEVICE,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!rxdesc)
+ goto err_dma;
+
+ txdesc = dmaengine_prep_slave_sg(txchan, &as->dma.sgtx, 1,
+ DMA_TO_DEVICE,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!txdesc)
+ goto err_dma;
+
+ dev_dbg(master->dev.parent,
+ " start dma xfer %p: len %u tx %p/%08llx rx %p/%08llx\n",
+ xfer, xfer->len, xfer->tx_buf, (unsigned long long)xfer->tx_dma,
+ xfer->rx_buf, (unsigned long long)xfer->rx_dma);
+
+ /* Enable relevant interrupts */
+ spi_writel(as, IER, SPI_BIT(OVRES));
+
+ /* Put the callback on the RX transfer only, that should finish last */
+ rxdesc->callback = dma_callback;
+ rxdesc->callback_param = master;
+
+ /* Submit and fire RX and TX with TX last so we're ready to read! */
+ cookie = rxdesc->tx_submit(rxdesc);
+ if (dma_submit_error(cookie))
+ goto err_dma;
+ cookie = txdesc->tx_submit(txdesc);
+ if (dma_submit_error(cookie))
+ goto err_dma;
+ rxchan->device->device_issue_pending(rxchan);
+ txchan->device->device_issue_pending(txchan);
+
+ /* take back lock */
+ atmel_spi_lock(as);
+ return 0;
+
+err_dma:
+ spi_writel(as, IDR, SPI_BIT(OVRES));
+ atmel_spi_stop_dma(as);
+err_exit:
+ atmel_spi_lock(as);
+ return -ENOMEM;
+}
+
+static void atmel_spi_next_xfer_data(struct spi_master *master,
+ struct spi_transfer *xfer,
+ dma_addr_t *tx_dma,
+ dma_addr_t *rx_dma,
+ u32 *plen)
+{
+ struct atmel_spi *as = spi_master_get_devdata(master);
+ u32 len = *plen;
+
+ /* use scratch buffer only when rx or tx data is unspecified */
+ if (xfer->rx_buf)
+ *rx_dma = xfer->rx_dma + xfer->len - *plen;
+ else {
+ *rx_dma = as->buffer_dma;
+ if (len > BUFFER_SIZE)
+ len = BUFFER_SIZE;
+ }
+
+ if (xfer->tx_buf)
+ *tx_dma = xfer->tx_dma + xfer->len - *plen;
+ else {
+ *tx_dma = as->buffer_dma;
+ if (len > BUFFER_SIZE)
+ len = BUFFER_SIZE;
+ memset(as->buffer, 0, len);
+ dma_sync_single_for_device(&as->pdev->dev,
+ as->buffer_dma, len, DMA_TO_DEVICE);
+ }
+
+ *plen = len;
+}
+
+static int atmel_spi_set_xfer_speed(struct atmel_spi *as,
+ struct spi_device *spi,
+ struct spi_transfer *xfer)
+{
+ u32 scbr, csr;
+ unsigned long bus_hz;
+
+ /* v1 chips start out at half the peripheral bus speed. */
+ bus_hz = clk_get_rate(as->clk);
+ if (!atmel_spi_is_v2(as))
+ bus_hz /= 2;
+
+ /*
+ * Calculate the lowest divider that satisfies the
+ * constraint, assuming div32/fdiv/mbz == 0.
+ */
+ if (xfer->speed_hz)
+ scbr = DIV_ROUND_UP(bus_hz, xfer->speed_hz);
+ else
+ /*
+ * This can happend if max_speed is null.
+ * In this case, we set the lowest possible speed
+ */
+ scbr = 0xff;
+
+ /*
+ * If the resulting divider doesn't fit into the
+ * register bitfield, we can't satisfy the constraint.
+ */
+ if (scbr >= (1 << SPI_SCBR_SIZE)) {
+ dev_err(&spi->dev,
+ "setup: %d Hz too slow, scbr %u; min %ld Hz\n",
+ xfer->speed_hz, scbr, bus_hz/255);
+ return -EINVAL;
+ }
+ if (scbr == 0) {
+ dev_err(&spi->dev,
+ "setup: %d Hz too high, scbr %u; max %ld Hz\n",
+ xfer->speed_hz, scbr, bus_hz);
+ return -EINVAL;
+ }
+ csr = spi_readl(as, CSR0 + 4 * spi->chip_select);
+ csr = SPI_BFINS(SCBR, scbr, csr);
+ spi_writel(as, CSR0 + 4 * spi->chip_select, csr);
+
+ return 0;
+}
+
+/*
+ * Submit next transfer for PDC.
+ * lock is held, spi irq is blocked
+ */
+static void atmel_spi_pdc_next_xfer(struct spi_master *master,
+ struct spi_message *msg,
+ struct spi_transfer *xfer)
+{
+ struct atmel_spi *as = spi_master_get_devdata(master);
+ u32 len;
+ dma_addr_t tx_dma, rx_dma;
+
+ spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS));
+
+ len = as->current_remaining_bytes;
+ atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len);
+ as->current_remaining_bytes -= len;
+
+ spi_writel(as, RPR, rx_dma);
+ spi_writel(as, TPR, tx_dma);
+
+ if (msg->spi->bits_per_word > 8)
+ len >>= 1;
+ spi_writel(as, RCR, len);
+ spi_writel(as, TCR, len);
+
+ dev_dbg(&msg->spi->dev,
+ " start xfer %p: len %u tx %p/%08llx rx %p/%08llx\n",
+ xfer, xfer->len, xfer->tx_buf,
+ (unsigned long long)xfer->tx_dma, xfer->rx_buf,
+ (unsigned long long)xfer->rx_dma);
+
+ if (as->current_remaining_bytes) {
+ len = as->current_remaining_bytes;
+ atmel_spi_next_xfer_data(master, xfer, &tx_dma, &rx_dma, &len);
+ as->current_remaining_bytes -= len;
+
+ spi_writel(as, RNPR, rx_dma);
+ spi_writel(as, TNPR, tx_dma);
+
+ if (msg->spi->bits_per_word > 8)
+ len >>= 1;
+ spi_writel(as, RNCR, len);
+ spi_writel(as, TNCR, len);
+
+ dev_dbg(&msg->spi->dev,
+ " next xfer %p: len %u tx %p/%08llx rx %p/%08llx\n",
+ xfer, xfer->len, xfer->tx_buf,
+ (unsigned long long)xfer->tx_dma, xfer->rx_buf,
+ (unsigned long long)xfer->rx_dma);
+ }
+
+ /* REVISIT: We're waiting for RXBUFF before we start the next
+ * transfer because we need to handle some difficult timing
+ * issues otherwise. If we wait for TXBUFE in one transfer and
+ * then starts waiting for RXBUFF in the next, it's difficult
+ * to tell the difference between the RXBUFF interrupt we're
+ * actually waiting for and the RXBUFF interrupt of the
+ * previous transfer.
+ *
+ * It should be doable, though. Just not now...
+ */
+ spi_writel(as, IER, SPI_BIT(RXBUFF) | SPI_BIT(OVRES));
+ spi_writel(as, PTCR, SPI_BIT(TXTEN) | SPI_BIT(RXTEN));
+}
+
+/*
+ * For DMA, tx_buf/tx_dma have the same relationship as rx_buf/rx_dma:
+ * - The buffer is either valid for CPU access, else NULL
+ * - If the buffer is valid, so is its DMA address
+ *
+ * This driver manages the dma address unless message->is_dma_mapped.
+ */
+static int
+atmel_spi_dma_map_xfer(struct atmel_spi *as, struct spi_transfer *xfer)
+{
+ struct device *dev = &as->pdev->dev;
+
+ xfer->tx_dma = xfer->rx_dma = INVALID_DMA_ADDRESS;
+ if (xfer->tx_buf) {
+ /* tx_buf is a const void* where we need a void * for the dma
+ * mapping */
+ void *nonconst_tx = (void *)xfer->tx_buf;
+
+ xfer->tx_dma = dma_map_single(dev,
+ nonconst_tx, xfer->len,
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(dev, xfer->tx_dma))
+ return -ENOMEM;
+ }
+ if (xfer->rx_buf) {
+ xfer->rx_dma = dma_map_single(dev,
+ xfer->rx_buf, xfer->len,
+ DMA_FROM_DEVICE);
+ if (dma_mapping_error(dev, xfer->rx_dma)) {
+ if (xfer->tx_buf)
+ dma_unmap_single(dev,
+ xfer->tx_dma, xfer->len,
+ DMA_TO_DEVICE);
+ return -ENOMEM;
+ }
+ }
+ return 0;
+}
+
+static void atmel_spi_dma_unmap_xfer(struct spi_master *master,
+ struct spi_transfer *xfer)
+{
+ if (xfer->tx_dma != INVALID_DMA_ADDRESS)
+ dma_unmap_single(master->dev.parent, xfer->tx_dma,
+ xfer->len, DMA_TO_DEVICE);
+ if (xfer->rx_dma != INVALID_DMA_ADDRESS)
+ dma_unmap_single(master->dev.parent, xfer->rx_dma,
+ xfer->len, DMA_FROM_DEVICE);
+}
+
+static void atmel_spi_disable_pdc_transfer(struct atmel_spi *as)
+{
+ spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS));
+}
+
+/* Called from IRQ
+ *
+ * Must update "current_remaining_bytes" to keep track of data
+ * to transfer.
+ */
+static void
+atmel_spi_pump_pio_data(struct atmel_spi *as, struct spi_transfer *xfer)
+{
+ u8 *rxp;
+ u16 *rxp16;
+ unsigned long xfer_pos = xfer->len - as->current_remaining_bytes;
+
+ if (xfer->rx_buf) {
+ if (xfer->bits_per_word > 8) {
+ rxp16 = (u16 *)(((u8 *)xfer->rx_buf) + xfer_pos);
+ *rxp16 = spi_readl(as, RDR);
+ } else {
+ rxp = ((u8 *)xfer->rx_buf) + xfer_pos;
+ *rxp = spi_readl(as, RDR);
+ }
+ } else {
+ spi_readl(as, RDR);
+ }
+ if (xfer->bits_per_word > 8) {
+ if (as->current_remaining_bytes > 2)
+ as->current_remaining_bytes -= 2;
+ else
+ as->current_remaining_bytes = 0;
+ } else {
+ as->current_remaining_bytes--;
+ }
+}
+
+/* Interrupt
+ *
+ * No need for locking in this Interrupt handler: done_status is the
+ * only information modified.
+ */
+static irqreturn_t
+atmel_spi_pio_interrupt(int irq, void *dev_id)
+{
+ struct spi_master *master = dev_id;
+ struct atmel_spi *as = spi_master_get_devdata(master);
+ u32 status, pending, imr;
+ struct spi_transfer *xfer;
+ int ret = IRQ_NONE;
+
+ imr = spi_readl(as, IMR);
+ status = spi_readl(as, SR);
+ pending = status & imr;
+
+ if (pending & SPI_BIT(OVRES)) {
+ ret = IRQ_HANDLED;
+ spi_writel(as, IDR, SPI_BIT(OVRES));
+ dev_warn(master->dev.parent, "overrun\n");
+
+ /*
+ * When we get an overrun, we disregard the current
+ * transfer. Data will not be copied back from any
+ * bounce buffer and msg->actual_len will not be
+ * updated with the last xfer.
+ *
+ * We will also not process any remaning transfers in
+ * the message.
+ */
+ as->done_status = -EIO;
+ smp_wmb();
+
+ /* Clear any overrun happening while cleaning up */
+ spi_readl(as, SR);
+
+ complete(&as->xfer_completion);
+
+ } else if (pending & SPI_BIT(RDRF)) {
+ atmel_spi_lock(as);
+
+ if (as->current_remaining_bytes) {
+ ret = IRQ_HANDLED;
+ xfer = as->current_transfer;
+ atmel_spi_pump_pio_data(as, xfer);
+ if (!as->current_remaining_bytes)
+ spi_writel(as, IDR, pending);
+
+ complete(&as->xfer_completion);
+ }
+
+ atmel_spi_unlock(as);
+ } else {
+ WARN_ONCE(pending, "IRQ not handled, pending = %x\n", pending);
+ ret = IRQ_HANDLED;
+ spi_writel(as, IDR, pending);
+ }
+
+ return ret;
+}
+
+static irqreturn_t
+atmel_spi_pdc_interrupt(int irq, void *dev_id)
+{
+ struct spi_master *master = dev_id;
+ struct atmel_spi *as = spi_master_get_devdata(master);
+ u32 status, pending, imr;
+ int ret = IRQ_NONE;
+
+ imr = spi_readl(as, IMR);
+ status = spi_readl(as, SR);
+ pending = status & imr;
+
+ if (pending & SPI_BIT(OVRES)) {
+
+ ret = IRQ_HANDLED;
+
+ spi_writel(as, IDR, (SPI_BIT(RXBUFF) | SPI_BIT(ENDRX)
+ | SPI_BIT(OVRES)));
+
+ /* Clear any overrun happening while cleaning up */
+ spi_readl(as, SR);
+
+ as->done_status = -EIO;
+
+ complete(&as->xfer_completion);
+
+ } else if (pending & (SPI_BIT(RXBUFF) | SPI_BIT(ENDRX))) {
+ ret = IRQ_HANDLED;
+
+ spi_writel(as, IDR, pending);
+
+ complete(&as->xfer_completion);
+ }
+
+ return ret;
+}
+
+static int atmel_spi_setup(struct spi_device *spi)
+{
+ struct atmel_spi *as;
+ struct atmel_spi_device *asd;
+ u32 csr;
+ unsigned int bits = spi->bits_per_word;
+ unsigned int npcs_pin;
+ int ret;
+
+ as = spi_master_get_devdata(spi->master);
+
+ /* see notes above re chipselect */
+ if (!atmel_spi_is_v2(as)
+ && spi->chip_select == 0
+ && (spi->mode & SPI_CS_HIGH)) {
+ dev_dbg(&spi->dev, "setup: can't be active-high\n");
+ return -EINVAL;
+ }
+
+ csr = SPI_BF(BITS, bits - 8);
+ if (spi->mode & SPI_CPOL)
+ csr |= SPI_BIT(CPOL);
+ if (!(spi->mode & SPI_CPHA))
+ csr |= SPI_BIT(NCPHA);
+
+ /* DLYBS is mostly irrelevant since we manage chipselect using GPIOs.
+ *
+ * DLYBCT would add delays between words, slowing down transfers.
+ * It could potentially be useful to cope with DMA bottlenecks, but
+ * in those cases it's probably best to just use a lower bitrate.
+ */
+ csr |= SPI_BF(DLYBS, 0);
+ csr |= SPI_BF(DLYBCT, 0);
+
+ /* chipselect must have been muxed as GPIO (e.g. in board setup) */
+ npcs_pin = (unsigned long)spi->controller_data;
+
+ if (gpio_is_valid(spi->cs_gpio))
+ npcs_pin = spi->cs_gpio;
+
+ asd = spi->controller_state;
+ if (!asd) {
+ asd = kzalloc(sizeof(struct atmel_spi_device), GFP_KERNEL);
+ if (!asd)
+ return -ENOMEM;
+
+ ret = gpio_request(npcs_pin, dev_name(&spi->dev));
+ if (ret) {
+ kfree(asd);
+ return ret;
+ }
+
+ asd->npcs_pin = npcs_pin;
+ spi->controller_state = asd;
+ gpio_direction_output(npcs_pin, !(spi->mode & SPI_CS_HIGH));
+ }
+
+ asd->csr = csr;
+
+ dev_dbg(&spi->dev,
+ "setup: bpw %u mode 0x%x -> csr%d %08x\n",
+ bits, spi->mode, spi->chip_select, csr);
+
+ if (!atmel_spi_is_v2(as))
+ spi_writel(as, CSR0 + 4 * spi->chip_select, csr);
+
+ return 0;
+}
+
+static int atmel_spi_one_transfer(struct spi_master *master,
+ struct spi_message *msg,
+ struct spi_transfer *xfer)
+{
+ struct atmel_spi *as;
+ struct spi_device *spi = msg->spi;
+ u8 bits;
+ u32 len;
+ struct atmel_spi_device *asd;
+ int timeout;
+ int ret;
+ unsigned long dma_timeout;
+
+ as = spi_master_get_devdata(master);
+
+ if (!(xfer->tx_buf || xfer->rx_buf) && xfer->len) {
+ dev_dbg(&spi->dev, "missing rx or tx buf\n");
+ return -EINVAL;
+ }
+
+ if (xfer->bits_per_word) {
+ asd = spi->controller_state;
+ bits = (asd->csr >> 4) & 0xf;
+ if (bits != xfer->bits_per_word - 8) {
+ dev_dbg(&spi->dev,
+ "you can't yet change bits_per_word in transfers\n");
+ return -ENOPROTOOPT;
+ }
+ }
+
+ /*
+ * DMA map early, for performance (empties dcache ASAP) and
+ * better fault reporting.
+ */
+ if ((!msg->is_dma_mapped)
+ && (atmel_spi_use_dma(as, xfer) || as->use_pdc)) {
+ if (atmel_spi_dma_map_xfer(as, xfer) < 0)
+ return -ENOMEM;
+ }
+
+ atmel_spi_set_xfer_speed(as, msg->spi, xfer);
+
+ as->done_status = 0;
+ as->current_transfer = xfer;
+ as->current_remaining_bytes = xfer->len;
+ while (as->current_remaining_bytes) {
+ reinit_completion(&as->xfer_completion);
+
+ if (as->use_pdc) {
+ atmel_spi_pdc_next_xfer(master, msg, xfer);
+ } else if (atmel_spi_use_dma(as, xfer)) {
+ len = as->current_remaining_bytes;
+ ret = atmel_spi_next_xfer_dma_submit(master,
+ xfer, &len);
+ if (ret) {
+ dev_err(&spi->dev,
+ "unable to use DMA, fallback to PIO\n");
+ atmel_spi_next_xfer_pio(master, xfer);
+ } else {
+ as->current_remaining_bytes -= len;
+ if (as->current_remaining_bytes < 0)
+ as->current_remaining_bytes = 0;
+ }
+ } else {
+ atmel_spi_next_xfer_pio(master, xfer);
+ }
+
+ /* interrupts are disabled, so free the lock for schedule */
+ atmel_spi_unlock(as);
+ dma_timeout = wait_for_completion_timeout(&as->xfer_completion,
+ SPI_DMA_TIMEOUT);
+ atmel_spi_lock(as);
+ if (WARN_ON(dma_timeout == 0)) {
+ dev_err(&spi->dev, "spi transfer timeout\n");
+ as->done_status = -EIO;
+ }
+
+ if (as->done_status)
+ break;
+ }
+
+ if (as->done_status) {
+ if (as->use_pdc) {
+ dev_warn(master->dev.parent,
+ "overrun (%u/%u remaining)\n",
+ spi_readl(as, TCR), spi_readl(as, RCR));
+
+ /*
+ * Clean up DMA registers and make sure the data
+ * registers are empty.
+ */
+ spi_writel(as, RNCR, 0);
+ spi_writel(as, TNCR, 0);
+ spi_writel(as, RCR, 0);
+ spi_writel(as, TCR, 0);
+ for (timeout = 1000; timeout; timeout--)
+ if (spi_readl(as, SR) & SPI_BIT(TXEMPTY))
+ break;
+ if (!timeout)
+ dev_warn(master->dev.parent,
+ "timeout waiting for TXEMPTY");
+ while (spi_readl(as, SR) & SPI_BIT(RDRF))
+ spi_readl(as, RDR);
+
+ /* Clear any overrun happening while cleaning up */
+ spi_readl(as, SR);
+
+ } else if (atmel_spi_use_dma(as, xfer)) {
+ atmel_spi_stop_dma(as);
+ }
+
+ if (!msg->is_dma_mapped
+ && (atmel_spi_use_dma(as, xfer) || as->use_pdc))
+ atmel_spi_dma_unmap_xfer(master, xfer);
+
+ return 0;
+
+ } else {
+ /* only update length if no error */
+ msg->actual_length += xfer->len;
+ }
+
+ if (!msg->is_dma_mapped
+ && (atmel_spi_use_dma(as, xfer) || as->use_pdc))
+ atmel_spi_dma_unmap_xfer(master, xfer);
+
+ if (xfer->delay_usecs)
+ udelay(xfer->delay_usecs);
+
+ if (xfer->cs_change) {
+ if (list_is_last(&xfer->transfer_list,
+ &msg->transfers)) {
+ as->keep_cs = true;
+ } else {
+ as->cs_active = !as->cs_active;
+ if (as->cs_active)
+ cs_activate(as, msg->spi);
+ else
+ cs_deactivate(as, msg->spi);
+ }
+ }
+
+ return 0;
+}
+
+static int atmel_spi_transfer_one_message(struct spi_master *master,
+ struct spi_message *msg)
+{
+ struct atmel_spi *as;
+ struct spi_transfer *xfer;
+ struct spi_device *spi = msg->spi;
+ int ret = 0;
+
+ as = spi_master_get_devdata(master);
+
+ dev_dbg(&spi->dev, "new message %p submitted for %s\n",
+ msg, dev_name(&spi->dev));
+
+ atmel_spi_lock(as);
+ cs_activate(as, spi);
+
+ as->cs_active = true;
+ as->keep_cs = false;
+
+ msg->status = 0;
+ msg->actual_length = 0;
+
+ list_for_each_entry(xfer, &msg->transfers, transfer_list) {
+ ret = atmel_spi_one_transfer(master, msg, xfer);
+ if (ret)
+ goto msg_done;
+ }
+
+ if (as->use_pdc)
+ atmel_spi_disable_pdc_transfer(as);
+
+ list_for_each_entry(xfer, &msg->transfers, transfer_list) {
+ dev_dbg(&spi->dev,
+ " xfer %p: len %u tx %p/%pad rx %p/%pad\n",
+ xfer, xfer->len,
+ xfer->tx_buf, &xfer->tx_dma,
+ xfer->rx_buf, &xfer->rx_dma);
+ }
+
+msg_done:
+ if (!as->keep_cs)
+ cs_deactivate(as, msg->spi);
+
+ atmel_spi_unlock(as);
+
+ msg->status = as->done_status;
+ spi_finalize_current_message(spi->master);
+
+ return ret;
+}
+
+static void atmel_spi_cleanup(struct spi_device *spi)
+{
+ struct atmel_spi_device *asd = spi->controller_state;
+ unsigned gpio = (unsigned long) spi->controller_data;
+
+ if (!asd)
+ return;
+
+ spi->controller_state = NULL;
+ gpio_free(gpio);
+ kfree(asd);
+}
+
+static inline unsigned int atmel_get_version(struct atmel_spi *as)
+{
+ return spi_readl(as, VERSION) & 0x00000fff;
+}
+
+static void atmel_get_caps(struct atmel_spi *as)
+{
+ unsigned int version;
+
+ version = atmel_get_version(as);
+ dev_info(&as->pdev->dev, "version: 0x%x\n", version);
+
+ as->caps.is_spi2 = version > 0x121;
+ as->caps.has_wdrbt = version >= 0x210;
+ as->caps.has_dma_support = version >= 0x212;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int atmel_spi_probe(struct platform_device *pdev)
+{
+ struct resource *regs;
+ int irq;
+ struct clk *clk;
+ int ret;
+ struct spi_master *master;
+ struct atmel_spi *as;
+
+ /* Select default pin state */
+ pinctrl_pm_select_default_state(&pdev->dev);
+
+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!regs)
+ return -ENXIO;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+
+ clk = devm_clk_get(&pdev->dev, "spi_clk");
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+
+ /* setup spi core then atmel-specific driver state */
+ ret = -ENOMEM;
+ master = spi_alloc_master(&pdev->dev, sizeof(*as));
+ if (!master)
+ goto out_free;
+
+ /* the spi->mode bits understood by this driver: */
+ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
+ master->bits_per_word_mask = SPI_BPW_RANGE_MASK(8, 16);
+ master->dev.of_node = pdev->dev.of_node;
+ master->bus_num = pdev->id;
+ master->num_chipselect = master->dev.of_node ? 0 : 4;
+ master->setup = atmel_spi_setup;
+ master->transfer_one_message = atmel_spi_transfer_one_message;
+ master->cleanup = atmel_spi_cleanup;
+ master->auto_runtime_pm = true;
+ platform_set_drvdata(pdev, master);
+
+ as = spi_master_get_devdata(master);
+
+ /*
+ * Scratch buffer is used for throwaway rx and tx data.
+ * It's coherent to minimize dcache pollution.
+ */
+ as->buffer = dma_alloc_coherent(&pdev->dev, BUFFER_SIZE,
+ &as->buffer_dma, GFP_KERNEL);
+ if (!as->buffer)
+ goto out_free;
+
+ spin_lock_init(&as->lock);
+
+ as->pdev = pdev;
+ as->regs = devm_ioremap_resource(&pdev->dev, regs);
+ if (IS_ERR(as->regs)) {
+ ret = PTR_ERR(as->regs);
+ goto out_free_buffer;
+ }
+ as->phybase = regs->start;
+ as->irq = irq;
+ as->clk = clk;
+
+ init_completion(&as->xfer_completion);
+
+ atmel_get_caps(as);
+
+ as->use_dma = false;
+ as->use_pdc = false;
+ if (as->caps.has_dma_support) {
+ ret = atmel_spi_configure_dma(as);
+ if (ret == 0)
+ as->use_dma = true;
+ else if (ret == -EPROBE_DEFER)
+ return ret;
+ } else {
+ as->use_pdc = true;
+ }
+
+ if (as->caps.has_dma_support && !as->use_dma)
+ dev_info(&pdev->dev, "Atmel SPI Controller using PIO only\n");
+
+ if (as->use_pdc) {
+ ret = devm_request_irq(&pdev->dev, irq, atmel_spi_pdc_interrupt,
+ 0, dev_name(&pdev->dev), master);
+ } else {
+ ret = devm_request_irq(&pdev->dev, irq, atmel_spi_pio_interrupt,
+ 0, dev_name(&pdev->dev), master);
+ }
+ if (ret)
+ goto out_unmap_regs;
+
+ /* Initialize the hardware */
+ ret = clk_prepare_enable(clk);
+ if (ret)
+ goto out_free_irq;
+ spi_writel(as, CR, SPI_BIT(SWRST));
+ spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */
+ if (as->caps.has_wdrbt) {
+ spi_writel(as, MR, SPI_BIT(WDRBT) | SPI_BIT(MODFDIS)
+ | SPI_BIT(MSTR));
+ } else {
+ spi_writel(as, MR, SPI_BIT(MSTR) | SPI_BIT(MODFDIS));
+ }
+
+ if (as->use_pdc)
+ spi_writel(as, PTCR, SPI_BIT(RXTDIS) | SPI_BIT(TXTDIS));
+ spi_writel(as, CR, SPI_BIT(SPIEN));
+
+ /* go! */
+ dev_info(&pdev->dev, "Atmel SPI Controller at 0x%08lx (irq %d)\n",
+ (unsigned long)regs->start, irq);
+
+ pm_runtime_set_autosuspend_delay(&pdev->dev, AUTOSUSPEND_TIMEOUT);
+ pm_runtime_use_autosuspend(&pdev->dev);
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+
+ ret = devm_spi_register_master(&pdev->dev, master);
+ if (ret)
+ goto out_free_dma;
+
+ return 0;
+
+out_free_dma:
+ pm_runtime_disable(&pdev->dev);
+ pm_runtime_set_suspended(&pdev->dev);
+
+ if (as->use_dma)
+ atmel_spi_release_dma(as);
+
+ spi_writel(as, CR, SPI_BIT(SWRST));
+ spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */
+ clk_disable_unprepare(clk);
+out_free_irq:
+out_unmap_regs:
+out_free_buffer:
+ dma_free_coherent(&pdev->dev, BUFFER_SIZE, as->buffer,
+ as->buffer_dma);
+out_free:
+ spi_master_put(master);
+ return ret;
+}
+
+static int atmel_spi_remove(struct platform_device *pdev)
+{
+ struct spi_master *master = platform_get_drvdata(pdev);
+ struct atmel_spi *as = spi_master_get_devdata(master);
+
+ pm_runtime_get_sync(&pdev->dev);
+
+ /* reset the hardware and block queue progress */
+ spin_lock_irq(&as->lock);
+ if (as->use_dma) {
+ atmel_spi_stop_dma(as);
+ atmel_spi_release_dma(as);
+ }
+
+ spi_writel(as, CR, SPI_BIT(SWRST));
+ spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */
+ spi_readl(as, SR);
+ spin_unlock_irq(&as->lock);
+
+ dma_free_coherent(&pdev->dev, BUFFER_SIZE, as->buffer,
+ as->buffer_dma);
+
+ clk_disable_unprepare(as->clk);
+
+ pm_runtime_put_noidle(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int atmel_spi_runtime_suspend(struct device *dev)
+{
+ struct spi_master *master = dev_get_drvdata(dev);
+ struct atmel_spi *as = spi_master_get_devdata(master);
+
+ clk_disable_unprepare(as->clk);
+ pinctrl_pm_select_sleep_state(dev);
+
+ return 0;
+}
+
+static int atmel_spi_runtime_resume(struct device *dev)
+{
+ struct spi_master *master = dev_get_drvdata(dev);
+ struct atmel_spi *as = spi_master_get_devdata(master);
+
+ pinctrl_pm_select_default_state(dev);
+
+ return clk_prepare_enable(as->clk);
+}
+
+static int atmel_spi_suspend(struct device *dev)
+{
+ struct spi_master *master = dev_get_drvdata(dev);
+ int ret;
+
+ /* Stop the queue running */
+ ret = spi_master_suspend(master);
+ if (ret) {
+ dev_warn(dev, "cannot suspend master\n");
+ return ret;
+ }
+
+ if (!pm_runtime_suspended(dev))
+ atmel_spi_runtime_suspend(dev);
+
+ return 0;
+}
+
+static int atmel_spi_resume(struct device *dev)
+{
+ struct spi_master *master = dev_get_drvdata(dev);
+ int ret;
+
+ if (!pm_runtime_suspended(dev)) {
+ ret = atmel_spi_runtime_resume(dev);
+ if (ret)
+ return ret;
+ }
+
+ /* Start the queue running */
+ ret = spi_master_resume(master);
+ if (ret)
+ dev_err(dev, "problem starting queue (%d)\n", ret);
+
+ return ret;
+}
+
+static const struct dev_pm_ops atmel_spi_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(atmel_spi_suspend, atmel_spi_resume)
+ SET_RUNTIME_PM_OPS(atmel_spi_runtime_suspend,
+ atmel_spi_runtime_resume, NULL)
+};
+#define ATMEL_SPI_PM_OPS (&atmel_spi_pm_ops)
+#else
+#define ATMEL_SPI_PM_OPS NULL
+#endif
+
+#if defined(CONFIG_OF)
+static const struct of_device_id atmel_spi_dt_ids[] = {
+ { .compatible = "atmel,at91rm9200-spi" },
+ { /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, atmel_spi_dt_ids);
+#endif
+
+static struct platform_driver atmel_spi_driver = {
+ .driver = {
+ .name = "atmel_spi",
+ .pm = ATMEL_SPI_PM_OPS,
+ .of_match_table = of_match_ptr(atmel_spi_dt_ids),
+ },
+ .probe = atmel_spi_probe,
+ .remove = atmel_spi_remove,
+};
+module_platform_driver(atmel_spi_driver);
+
+MODULE_DESCRIPTION("Atmel AT32/AT91 SPI Controller driver");
+MODULE_AUTHOR("Haavard Skinnemoen (Atmel)");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:atmel_spi");