diff options
Diffstat (limited to 'kernel/drivers/scsi/sym53c8xx_2/sym_nvram.c')
| -rw-r--r-- | kernel/drivers/scsi/sym53c8xx_2/sym_nvram.c | 779 |
1 files changed, 779 insertions, 0 deletions
diff --git a/kernel/drivers/scsi/sym53c8xx_2/sym_nvram.c b/kernel/drivers/scsi/sym53c8xx_2/sym_nvram.c new file mode 100644 index 000000000..5662fbb3f --- /dev/null +++ b/kernel/drivers/scsi/sym53c8xx_2/sym_nvram.c @@ -0,0 +1,779 @@ +/* + * Device driver for the SYMBIOS/LSILOGIC 53C8XX and 53C1010 family + * of PCI-SCSI IO processors. + * + * Copyright (C) 1999-2001 Gerard Roudier <groudier@free.fr> + * + * This driver is derived from the Linux sym53c8xx driver. + * Copyright (C) 1998-2000 Gerard Roudier + * + * The sym53c8xx driver is derived from the ncr53c8xx driver that had been + * a port of the FreeBSD ncr driver to Linux-1.2.13. + * + * The original ncr driver has been written for 386bsd and FreeBSD by + * Wolfgang Stanglmeier <wolf@cologne.de> + * Stefan Esser <se@mi.Uni-Koeln.de> + * Copyright (C) 1994 Wolfgang Stanglmeier + * + * Other major contributions: + * + * NVRAM detection and reading. + * Copyright (C) 1997 Richard Waltham <dormouse@farsrobt.demon.co.uk> + * + *----------------------------------------------------------------------------- + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include "sym_glue.h" +#include "sym_nvram.h" + +#ifdef SYM_CONF_DEBUG_NVRAM +static u_char Tekram_boot_delay[7] = {3, 5, 10, 20, 30, 60, 120}; +#endif + +/* + * Get host setup from NVRAM. + */ +void sym_nvram_setup_host(struct Scsi_Host *shost, struct sym_hcb *np, struct sym_nvram *nvram) +{ + /* + * Get parity checking, host ID, verbose mode + * and miscellaneous host flags from NVRAM. + */ + switch (nvram->type) { + case SYM_SYMBIOS_NVRAM: + if (!(nvram->data.Symbios.flags & SYMBIOS_PARITY_ENABLE)) + np->rv_scntl0 &= ~0x0a; + np->myaddr = nvram->data.Symbios.host_id & 0x0f; + if (nvram->data.Symbios.flags & SYMBIOS_VERBOSE_MSGS) + np->verbose += 1; + if (nvram->data.Symbios.flags1 & SYMBIOS_SCAN_HI_LO) + shost->reverse_ordering = 1; + if (nvram->data.Symbios.flags2 & SYMBIOS_AVOID_BUS_RESET) + np->usrflags |= SYM_AVOID_BUS_RESET; + break; + case SYM_TEKRAM_NVRAM: + np->myaddr = nvram->data.Tekram.host_id & 0x0f; + break; +#ifdef CONFIG_PARISC + case SYM_PARISC_PDC: + if (nvram->data.parisc.host_id != -1) + np->myaddr = nvram->data.parisc.host_id; + if (nvram->data.parisc.factor != -1) + np->minsync = nvram->data.parisc.factor; + if (nvram->data.parisc.width != -1) + np->maxwide = nvram->data.parisc.width; + switch (nvram->data.parisc.mode) { + case 0: np->scsi_mode = SMODE_SE; break; + case 1: np->scsi_mode = SMODE_HVD; break; + case 2: np->scsi_mode = SMODE_LVD; break; + default: break; + } +#endif + default: + break; + } +} + +/* + * Get target set-up from Symbios format NVRAM. + */ +static void +sym_Symbios_setup_target(struct sym_tcb *tp, int target, Symbios_nvram *nvram) +{ + Symbios_target *tn = &nvram->target[target]; + + if (!(tn->flags & SYMBIOS_QUEUE_TAGS_ENABLED)) + tp->usrtags = 0; + if (!(tn->flags & SYMBIOS_DISCONNECT_ENABLE)) + tp->usrflags &= ~SYM_DISC_ENABLED; + if (!(tn->flags & SYMBIOS_SCAN_AT_BOOT_TIME)) + tp->usrflags |= SYM_SCAN_BOOT_DISABLED; + if (!(tn->flags & SYMBIOS_SCAN_LUNS)) + tp->usrflags |= SYM_SCAN_LUNS_DISABLED; + tp->usr_period = (tn->sync_period + 3) / 4; + tp->usr_width = (tn->bus_width == 0x8) ? 0 : 1; +} + +static const unsigned char Tekram_sync[16] = { + 25, 31, 37, 43, 50, 62, 75, 125, 12, 15, 18, 21, 6, 7, 9, 10 +}; + +/* + * Get target set-up from Tekram format NVRAM. + */ +static void +sym_Tekram_setup_target(struct sym_tcb *tp, int target, Tekram_nvram *nvram) +{ + struct Tekram_target *tn = &nvram->target[target]; + + if (tn->flags & TEKRAM_TAGGED_COMMANDS) { + tp->usrtags = 2 << nvram->max_tags_index; + } + + if (tn->flags & TEKRAM_DISCONNECT_ENABLE) + tp->usrflags |= SYM_DISC_ENABLED; + + if (tn->flags & TEKRAM_SYNC_NEGO) + tp->usr_period = Tekram_sync[tn->sync_index & 0xf]; + tp->usr_width = (tn->flags & TEKRAM_WIDE_NEGO) ? 1 : 0; +} + +/* + * Get target setup from NVRAM. + */ +void sym_nvram_setup_target(struct sym_tcb *tp, int target, struct sym_nvram *nvp) +{ + switch (nvp->type) { + case SYM_SYMBIOS_NVRAM: + sym_Symbios_setup_target(tp, target, &nvp->data.Symbios); + break; + case SYM_TEKRAM_NVRAM: + sym_Tekram_setup_target(tp, target, &nvp->data.Tekram); + break; + default: + break; + } +} + +#ifdef SYM_CONF_DEBUG_NVRAM +/* + * Dump Symbios format NVRAM for debugging purpose. + */ +static void sym_display_Symbios_nvram(struct sym_device *np, Symbios_nvram *nvram) +{ + int i; + + /* display Symbios nvram host data */ + printf("%s: HOST ID=%d%s%s%s%s%s%s\n", + sym_name(np), nvram->host_id & 0x0f, + (nvram->flags & SYMBIOS_SCAM_ENABLE) ? " SCAM" :"", + (nvram->flags & SYMBIOS_PARITY_ENABLE) ? " PARITY" :"", + (nvram->flags & SYMBIOS_VERBOSE_MSGS) ? " VERBOSE" :"", + (nvram->flags & SYMBIOS_CHS_MAPPING) ? " CHS_ALT" :"", + (nvram->flags2 & SYMBIOS_AVOID_BUS_RESET)?" NO_RESET" :"", + (nvram->flags1 & SYMBIOS_SCAN_HI_LO) ? " HI_LO" :""); + + /* display Symbios nvram drive data */ + for (i = 0 ; i < 15 ; i++) { + struct Symbios_target *tn = &nvram->target[i]; + printf("%s-%d:%s%s%s%s WIDTH=%d SYNC=%d TMO=%d\n", + sym_name(np), i, + (tn->flags & SYMBIOS_DISCONNECT_ENABLE) ? " DISC" : "", + (tn->flags & SYMBIOS_SCAN_AT_BOOT_TIME) ? " SCAN_BOOT" : "", + (tn->flags & SYMBIOS_SCAN_LUNS) ? " SCAN_LUNS" : "", + (tn->flags & SYMBIOS_QUEUE_TAGS_ENABLED)? " TCQ" : "", + tn->bus_width, + tn->sync_period / 4, + tn->timeout); + } +} + +/* + * Dump TEKRAM format NVRAM for debugging purpose. + */ +static void sym_display_Tekram_nvram(struct sym_device *np, Tekram_nvram *nvram) +{ + int i, tags, boot_delay; + char *rem; + + /* display Tekram nvram host data */ + tags = 2 << nvram->max_tags_index; + boot_delay = 0; + if (nvram->boot_delay_index < 6) + boot_delay = Tekram_boot_delay[nvram->boot_delay_index]; + switch ((nvram->flags & TEKRAM_REMOVABLE_FLAGS) >> 6) { + default: + case 0: rem = ""; break; + case 1: rem = " REMOVABLE=boot device"; break; + case 2: rem = " REMOVABLE=all"; break; + } + + printf("%s: HOST ID=%d%s%s%s%s%s%s%s%s%s BOOT DELAY=%d tags=%d\n", + sym_name(np), nvram->host_id & 0x0f, + (nvram->flags1 & SYMBIOS_SCAM_ENABLE) ? " SCAM" :"", + (nvram->flags & TEKRAM_MORE_THAN_2_DRIVES) ? " >2DRIVES":"", + (nvram->flags & TEKRAM_DRIVES_SUP_1GB) ? " >1GB" :"", + (nvram->flags & TEKRAM_RESET_ON_POWER_ON) ? " RESET" :"", + (nvram->flags & TEKRAM_ACTIVE_NEGATION) ? " ACT_NEG" :"", + (nvram->flags & TEKRAM_IMMEDIATE_SEEK) ? " IMM_SEEK" :"", + (nvram->flags & TEKRAM_SCAN_LUNS) ? " SCAN_LUNS" :"", + (nvram->flags1 & TEKRAM_F2_F6_ENABLED) ? " F2_F6" :"", + rem, boot_delay, tags); + + /* display Tekram nvram drive data */ + for (i = 0; i <= 15; i++) { + int sync, j; + struct Tekram_target *tn = &nvram->target[i]; + j = tn->sync_index & 0xf; + sync = Tekram_sync[j]; + printf("%s-%d:%s%s%s%s%s%s PERIOD=%d\n", + sym_name(np), i, + (tn->flags & TEKRAM_PARITY_CHECK) ? " PARITY" : "", + (tn->flags & TEKRAM_SYNC_NEGO) ? " SYNC" : "", + (tn->flags & TEKRAM_DISCONNECT_ENABLE) ? " DISC" : "", + (tn->flags & TEKRAM_START_CMD) ? " START" : "", + (tn->flags & TEKRAM_TAGGED_COMMANDS) ? " TCQ" : "", + (tn->flags & TEKRAM_WIDE_NEGO) ? " WIDE" : "", + sync); + } +} +#else +static void sym_display_Symbios_nvram(struct sym_device *np, Symbios_nvram *nvram) { (void)np; (void)nvram; } +static void sym_display_Tekram_nvram(struct sym_device *np, Tekram_nvram *nvram) { (void)np; (void)nvram; } +#endif /* SYM_CONF_DEBUG_NVRAM */ + + +/* + * 24C16 EEPROM reading. + * + * GPOI0 - data in/data out + * GPIO1 - clock + * Symbios NVRAM wiring now also used by Tekram. + */ + +#define SET_BIT 0 +#define CLR_BIT 1 +#define SET_CLK 2 +#define CLR_CLK 3 + +/* + * Set/clear data/clock bit in GPIO0 + */ +static void S24C16_set_bit(struct sym_device *np, u_char write_bit, u_char *gpreg, + int bit_mode) +{ + udelay(5); + switch (bit_mode) { + case SET_BIT: + *gpreg |= write_bit; + break; + case CLR_BIT: + *gpreg &= 0xfe; + break; + case SET_CLK: + *gpreg |= 0x02; + break; + case CLR_CLK: + *gpreg &= 0xfd; + break; + + } + OUTB(np, nc_gpreg, *gpreg); + INB(np, nc_mbox1); + udelay(5); +} + +/* + * Send START condition to NVRAM to wake it up. + */ +static void S24C16_start(struct sym_device *np, u_char *gpreg) +{ + S24C16_set_bit(np, 1, gpreg, SET_BIT); + S24C16_set_bit(np, 0, gpreg, SET_CLK); + S24C16_set_bit(np, 0, gpreg, CLR_BIT); + S24C16_set_bit(np, 0, gpreg, CLR_CLK); +} + +/* + * Send STOP condition to NVRAM - puts NVRAM to sleep... ZZzzzz!! + */ +static void S24C16_stop(struct sym_device *np, u_char *gpreg) +{ + S24C16_set_bit(np, 0, gpreg, SET_CLK); + S24C16_set_bit(np, 1, gpreg, SET_BIT); +} + +/* + * Read or write a bit to the NVRAM, + * read if GPIO0 input else write if GPIO0 output + */ +static void S24C16_do_bit(struct sym_device *np, u_char *read_bit, u_char write_bit, + u_char *gpreg) +{ + S24C16_set_bit(np, write_bit, gpreg, SET_BIT); + S24C16_set_bit(np, 0, gpreg, SET_CLK); + if (read_bit) + *read_bit = INB(np, nc_gpreg); + S24C16_set_bit(np, 0, gpreg, CLR_CLK); + S24C16_set_bit(np, 0, gpreg, CLR_BIT); +} + +/* + * Output an ACK to the NVRAM after reading, + * change GPIO0 to output and when done back to an input + */ +static void S24C16_write_ack(struct sym_device *np, u_char write_bit, u_char *gpreg, + u_char *gpcntl) +{ + OUTB(np, nc_gpcntl, *gpcntl & 0xfe); + S24C16_do_bit(np, NULL, write_bit, gpreg); + OUTB(np, nc_gpcntl, *gpcntl); +} + +/* + * Input an ACK from NVRAM after writing, + * change GPIO0 to input and when done back to an output + */ +static void S24C16_read_ack(struct sym_device *np, u_char *read_bit, u_char *gpreg, + u_char *gpcntl) +{ + OUTB(np, nc_gpcntl, *gpcntl | 0x01); + S24C16_do_bit(np, read_bit, 1, gpreg); + OUTB(np, nc_gpcntl, *gpcntl); +} + +/* + * WRITE a byte to the NVRAM and then get an ACK to see it was accepted OK, + * GPIO0 must already be set as an output + */ +static void S24C16_write_byte(struct sym_device *np, u_char *ack_data, u_char write_data, + u_char *gpreg, u_char *gpcntl) +{ + int x; + + for (x = 0; x < 8; x++) + S24C16_do_bit(np, NULL, (write_data >> (7 - x)) & 0x01, gpreg); + + S24C16_read_ack(np, ack_data, gpreg, gpcntl); +} + +/* + * READ a byte from the NVRAM and then send an ACK to say we have got it, + * GPIO0 must already be set as an input + */ +static void S24C16_read_byte(struct sym_device *np, u_char *read_data, u_char ack_data, + u_char *gpreg, u_char *gpcntl) +{ + int x; + u_char read_bit; + + *read_data = 0; + for (x = 0; x < 8; x++) { + S24C16_do_bit(np, &read_bit, 1, gpreg); + *read_data |= ((read_bit & 0x01) << (7 - x)); + } + + S24C16_write_ack(np, ack_data, gpreg, gpcntl); +} + +#ifdef SYM_CONF_NVRAM_WRITE_SUPPORT +/* + * Write 'len' bytes starting at 'offset'. + */ +static int sym_write_S24C16_nvram(struct sym_device *np, int offset, + u_char *data, int len) +{ + u_char gpcntl, gpreg; + u_char old_gpcntl, old_gpreg; + u_char ack_data; + int x; + + /* save current state of GPCNTL and GPREG */ + old_gpreg = INB(np, nc_gpreg); + old_gpcntl = INB(np, nc_gpcntl); + gpcntl = old_gpcntl & 0x1c; + + /* set up GPREG & GPCNTL to set GPIO0 and GPIO1 in to known state */ + OUTB(np, nc_gpreg, old_gpreg); + OUTB(np, nc_gpcntl, gpcntl); + + /* this is to set NVRAM into a known state with GPIO0/1 both low */ + gpreg = old_gpreg; + S24C16_set_bit(np, 0, &gpreg, CLR_CLK); + S24C16_set_bit(np, 0, &gpreg, CLR_BIT); + + /* now set NVRAM inactive with GPIO0/1 both high */ + S24C16_stop(np, &gpreg); + + /* NVRAM has to be written in segments of 16 bytes */ + for (x = 0; x < len ; x += 16) { + do { + S24C16_start(np, &gpreg); + S24C16_write_byte(np, &ack_data, + 0xa0 | (((offset+x) >> 7) & 0x0e), + &gpreg, &gpcntl); + } while (ack_data & 0x01); + + S24C16_write_byte(np, &ack_data, (offset+x) & 0xff, + &gpreg, &gpcntl); + + for (y = 0; y < 16; y++) + S24C16_write_byte(np, &ack_data, data[x+y], + &gpreg, &gpcntl); + S24C16_stop(np, &gpreg); + } + + /* return GPIO0/1 to original states after having accessed NVRAM */ + OUTB(np, nc_gpcntl, old_gpcntl); + OUTB(np, nc_gpreg, old_gpreg); + + return 0; +} +#endif /* SYM_CONF_NVRAM_WRITE_SUPPORT */ + +/* + * Read 'len' bytes starting at 'offset'. + */ +static int sym_read_S24C16_nvram(struct sym_device *np, int offset, u_char *data, int len) +{ + u_char gpcntl, gpreg; + u_char old_gpcntl, old_gpreg; + u_char ack_data; + int retv = 1; + int x; + + /* save current state of GPCNTL and GPREG */ + old_gpreg = INB(np, nc_gpreg); + old_gpcntl = INB(np, nc_gpcntl); + gpcntl = old_gpcntl & 0x1c; + + /* set up GPREG & GPCNTL to set GPIO0 and GPIO1 in to known state */ + OUTB(np, nc_gpreg, old_gpreg); + OUTB(np, nc_gpcntl, gpcntl); + + /* this is to set NVRAM into a known state with GPIO0/1 both low */ + gpreg = old_gpreg; + S24C16_set_bit(np, 0, &gpreg, CLR_CLK); + S24C16_set_bit(np, 0, &gpreg, CLR_BIT); + + /* now set NVRAM inactive with GPIO0/1 both high */ + S24C16_stop(np, &gpreg); + + /* activate NVRAM */ + S24C16_start(np, &gpreg); + + /* write device code and random address MSB */ + S24C16_write_byte(np, &ack_data, + 0xa0 | ((offset >> 7) & 0x0e), &gpreg, &gpcntl); + if (ack_data & 0x01) + goto out; + + /* write random address LSB */ + S24C16_write_byte(np, &ack_data, + offset & 0xff, &gpreg, &gpcntl); + if (ack_data & 0x01) + goto out; + + /* regenerate START state to set up for reading */ + S24C16_start(np, &gpreg); + + /* rewrite device code and address MSB with read bit set (lsb = 0x01) */ + S24C16_write_byte(np, &ack_data, + 0xa1 | ((offset >> 7) & 0x0e), &gpreg, &gpcntl); + if (ack_data & 0x01) + goto out; + + /* now set up GPIO0 for inputting data */ + gpcntl |= 0x01; + OUTB(np, nc_gpcntl, gpcntl); + + /* input all requested data - only part of total NVRAM */ + for (x = 0; x < len; x++) + S24C16_read_byte(np, &data[x], (x == (len-1)), &gpreg, &gpcntl); + + /* finally put NVRAM back in inactive mode */ + gpcntl &= 0xfe; + OUTB(np, nc_gpcntl, gpcntl); + S24C16_stop(np, &gpreg); + retv = 0; +out: + /* return GPIO0/1 to original states after having accessed NVRAM */ + OUTB(np, nc_gpcntl, old_gpcntl); + OUTB(np, nc_gpreg, old_gpreg); + + return retv; +} + +#undef SET_BIT +#undef CLR_BIT +#undef SET_CLK +#undef CLR_CLK + +/* + * Try reading Symbios NVRAM. + * Return 0 if OK. + */ +static int sym_read_Symbios_nvram(struct sym_device *np, Symbios_nvram *nvram) +{ + static u_char Symbios_trailer[6] = {0xfe, 0xfe, 0, 0, 0, 0}; + u_char *data = (u_char *) nvram; + int len = sizeof(*nvram); + u_short csum; + int x; + + /* probe the 24c16 and read the SYMBIOS 24c16 area */ + if (sym_read_S24C16_nvram (np, SYMBIOS_NVRAM_ADDRESS, data, len)) + return 1; + + /* check valid NVRAM signature, verify byte count and checksum */ + if (nvram->type != 0 || + memcmp(nvram->trailer, Symbios_trailer, 6) || + nvram->byte_count != len - 12) + return 1; + + /* verify checksum */ + for (x = 6, csum = 0; x < len - 6; x++) + csum += data[x]; + if (csum != nvram->checksum) + return 1; + + return 0; +} + +/* + * 93C46 EEPROM reading. + * + * GPOI0 - data in + * GPIO1 - data out + * GPIO2 - clock + * GPIO4 - chip select + * + * Used by Tekram. + */ + +/* + * Pulse clock bit in GPIO0 + */ +static void T93C46_Clk(struct sym_device *np, u_char *gpreg) +{ + OUTB(np, nc_gpreg, *gpreg | 0x04); + INB(np, nc_mbox1); + udelay(2); + OUTB(np, nc_gpreg, *gpreg); +} + +/* + * Read bit from NVRAM + */ +static void T93C46_Read_Bit(struct sym_device *np, u_char *read_bit, u_char *gpreg) +{ + udelay(2); + T93C46_Clk(np, gpreg); + *read_bit = INB(np, nc_gpreg); +} + +/* + * Write bit to GPIO0 + */ +static void T93C46_Write_Bit(struct sym_device *np, u_char write_bit, u_char *gpreg) +{ + if (write_bit & 0x01) + *gpreg |= 0x02; + else + *gpreg &= 0xfd; + + *gpreg |= 0x10; + + OUTB(np, nc_gpreg, *gpreg); + INB(np, nc_mbox1); + udelay(2); + + T93C46_Clk(np, gpreg); +} + +/* + * Send STOP condition to NVRAM - puts NVRAM to sleep... ZZZzzz!! + */ +static void T93C46_Stop(struct sym_device *np, u_char *gpreg) +{ + *gpreg &= 0xef; + OUTB(np, nc_gpreg, *gpreg); + INB(np, nc_mbox1); + udelay(2); + + T93C46_Clk(np, gpreg); +} + +/* + * Send read command and address to NVRAM + */ +static void T93C46_Send_Command(struct sym_device *np, u_short write_data, + u_char *read_bit, u_char *gpreg) +{ + int x; + + /* send 9 bits, start bit (1), command (2), address (6) */ + for (x = 0; x < 9; x++) + T93C46_Write_Bit(np, (u_char) (write_data >> (8 - x)), gpreg); + + *read_bit = INB(np, nc_gpreg); +} + +/* + * READ 2 bytes from the NVRAM + */ +static void T93C46_Read_Word(struct sym_device *np, + unsigned short *nvram_data, unsigned char *gpreg) +{ + int x; + u_char read_bit; + + *nvram_data = 0; + for (x = 0; x < 16; x++) { + T93C46_Read_Bit(np, &read_bit, gpreg); + + if (read_bit & 0x01) + *nvram_data |= (0x01 << (15 - x)); + else + *nvram_data &= ~(0x01 << (15 - x)); + } +} + +/* + * Read Tekram NvRAM data. + */ +static int T93C46_Read_Data(struct sym_device *np, unsigned short *data, + int len, unsigned char *gpreg) +{ + int x; + + for (x = 0; x < len; x++) { + unsigned char read_bit; + /* output read command and address */ + T93C46_Send_Command(np, 0x180 | x, &read_bit, gpreg); + if (read_bit & 0x01) + return 1; /* Bad */ + T93C46_Read_Word(np, &data[x], gpreg); + T93C46_Stop(np, gpreg); + } + + return 0; +} + +/* + * Try reading 93C46 Tekram NVRAM. + */ +static int sym_read_T93C46_nvram(struct sym_device *np, Tekram_nvram *nvram) +{ + u_char gpcntl, gpreg; + u_char old_gpcntl, old_gpreg; + int retv = 1; + + /* save current state of GPCNTL and GPREG */ + old_gpreg = INB(np, nc_gpreg); + old_gpcntl = INB(np, nc_gpcntl); + + /* set up GPREG & GPCNTL to set GPIO0/1/2/4 in to known state, 0 in, + 1/2/4 out */ + gpreg = old_gpreg & 0xe9; + OUTB(np, nc_gpreg, gpreg); + gpcntl = (old_gpcntl & 0xe9) | 0x09; + OUTB(np, nc_gpcntl, gpcntl); + + /* input all of NVRAM, 64 words */ + retv = T93C46_Read_Data(np, (u_short *) nvram, + sizeof(*nvram) / sizeof(short), &gpreg); + + /* return GPIO0/1/2/4 to original states after having accessed NVRAM */ + OUTB(np, nc_gpcntl, old_gpcntl); + OUTB(np, nc_gpreg, old_gpreg); + + return retv; +} + +/* + * Try reading Tekram NVRAM. + * Return 0 if OK. + */ +static int sym_read_Tekram_nvram (struct sym_device *np, Tekram_nvram *nvram) +{ + u_char *data = (u_char *) nvram; + int len = sizeof(*nvram); + u_short csum; + int x; + + switch (np->pdev->device) { + case PCI_DEVICE_ID_NCR_53C885: + case PCI_DEVICE_ID_NCR_53C895: + case PCI_DEVICE_ID_NCR_53C896: + x = sym_read_S24C16_nvram(np, TEKRAM_24C16_NVRAM_ADDRESS, + data, len); + break; + case PCI_DEVICE_ID_NCR_53C875: + x = sym_read_S24C16_nvram(np, TEKRAM_24C16_NVRAM_ADDRESS, + data, len); + if (!x) + break; + default: + x = sym_read_T93C46_nvram(np, nvram); + break; + } + if (x) + return 1; + + /* verify checksum */ + for (x = 0, csum = 0; x < len - 1; x += 2) + csum += data[x] + (data[x+1] << 8); + if (csum != 0x1234) + return 1; + + return 0; +} + +#ifdef CONFIG_PARISC +/* + * Host firmware (PDC) keeps a table for altering SCSI capabilities. + * Many newer machines export one channel of 53c896 chip as SE, 50-pin HD. + * Also used for Multi-initiator SCSI clusters to set the SCSI Initiator ID. + */ +static int sym_read_parisc_pdc(struct sym_device *np, struct pdc_initiator *pdc) +{ + struct hardware_path hwpath; + get_pci_node_path(np->pdev, &hwpath); + if (!pdc_get_initiator(&hwpath, pdc)) + return 0; + + return SYM_PARISC_PDC; +} +#else +static inline int sym_read_parisc_pdc(struct sym_device *np, + struct pdc_initiator *x) +{ + return 0; +} +#endif + +/* + * Try reading Symbios or Tekram NVRAM + */ +int sym_read_nvram(struct sym_device *np, struct sym_nvram *nvp) +{ + if (!sym_read_Symbios_nvram(np, &nvp->data.Symbios)) { + nvp->type = SYM_SYMBIOS_NVRAM; + sym_display_Symbios_nvram(np, &nvp->data.Symbios); + } else if (!sym_read_Tekram_nvram(np, &nvp->data.Tekram)) { + nvp->type = SYM_TEKRAM_NVRAM; + sym_display_Tekram_nvram(np, &nvp->data.Tekram); + } else { + nvp->type = sym_read_parisc_pdc(np, &nvp->data.parisc); + } + return nvp->type; +} + +char *sym_nvram_type(struct sym_nvram *nvp) +{ + switch (nvp->type) { + case SYM_SYMBIOS_NVRAM: + return "Symbios NVRAM"; + case SYM_TEKRAM_NVRAM: + return "Tekram NVRAM"; + case SYM_PARISC_PDC: + return "PA-RISC Firmware"; + default: + return "No NVRAM"; + } +} |