diff options
Diffstat (limited to 'kernel/drivers/scsi/sun3_scsi.h')
| -rw-r--r-- | kernel/drivers/scsi/sun3_scsi.h | 102 |
1 files changed, 102 insertions, 0 deletions
diff --git a/kernel/drivers/scsi/sun3_scsi.h b/kernel/drivers/scsi/sun3_scsi.h new file mode 100644 index 000000000..d22745fae --- /dev/null +++ b/kernel/drivers/scsi/sun3_scsi.h @@ -0,0 +1,102 @@ +/* + * Sun3 SCSI stuff by Erik Verbruggen (erik@bigmama.xtdnet.nl) + * + * Sun3 DMA additions by Sam Creasey (sammy@sammy.net) + * + * Adapted from mac_scsinew.h: + */ +/* + * Cumana Generic NCR5380 driver defines + * + * Copyright 1993, Drew Eckhardt + * Visionary Computing + * (Unix and Linux consulting and custom programming) + * drew@colorado.edu + * +1 (303) 440-4894 + */ + +#ifndef SUN3_SCSI_H +#define SUN3_SCSI_H + +/* additional registers - mainly DMA control regs */ +/* these start at regbase + 8 -- directly after the NCR regs */ +struct sun3_dma_regs { + unsigned short dma_addr_hi; /* vme only */ + unsigned short dma_addr_lo; /* vme only */ + unsigned short dma_count_hi; /* vme only */ + unsigned short dma_count_lo; /* vme only */ + unsigned short udc_data; /* udc dma data reg (obio only) */ + unsigned short udc_addr; /* uda dma addr reg (obio only) */ + unsigned short fifo_data; /* fifo data reg, holds extra byte on + odd dma reads */ + unsigned short fifo_count; + unsigned short csr; /* control/status reg */ + unsigned short bpack_hi; /* vme only */ + unsigned short bpack_lo; /* vme only */ + unsigned short ivect; /* vme only */ + unsigned short fifo_count_hi; /* vme only */ +}; + +/* ucd chip specific regs - live in dvma space */ +struct sun3_udc_regs { + unsigned short rsel; /* select regs to load */ + unsigned short addr_hi; /* high word of addr */ + unsigned short addr_lo; /* low word */ + unsigned short count; /* words to be xfer'd */ + unsigned short mode_hi; /* high word of channel mode */ + unsigned short mode_lo; /* low word of channel mode */ +}; + +/* addresses of the udc registers */ +#define UDC_MODE 0x38 +#define UDC_CSR 0x2e /* command/status */ +#define UDC_CHN_HI 0x26 /* chain high word */ +#define UDC_CHN_LO 0x22 /* chain lo word */ +#define UDC_CURA_HI 0x1a /* cur reg A high */ +#define UDC_CURA_LO 0x0a /* cur reg A low */ +#define UDC_CURB_HI 0x12 /* cur reg B high */ +#define UDC_CURB_LO 0x02 /* cur reg B low */ +#define UDC_MODE_HI 0x56 /* mode reg high */ +#define UDC_MODE_LO 0x52 /* mode reg low */ +#define UDC_COUNT 0x32 /* words to xfer */ + +/* some udc commands */ +#define UDC_RESET 0 +#define UDC_CHN_START 0xa0 /* start chain */ +#define UDC_INT_ENABLE 0x32 /* channel 1 int on */ + +/* udc mode words */ +#define UDC_MODE_HIWORD 0x40 +#define UDC_MODE_LSEND 0xc2 +#define UDC_MODE_LRECV 0xd2 + +/* udc reg selections */ +#define UDC_RSEL_SEND 0x282 +#define UDC_RSEL_RECV 0x182 + +/* bits in csr reg */ +#define CSR_DMA_ACTIVE 0x8000 +#define CSR_DMA_CONFLICT 0x4000 +#define CSR_DMA_BUSERR 0x2000 + +#define CSR_FIFO_EMPTY 0x400 /* fifo flushed? */ +#define CSR_SDB_INT 0x200 /* sbc interrupt pending */ +#define CSR_DMA_INT 0x100 /* dma interrupt pending */ + +#define CSR_LEFT 0xc0 +#define CSR_LEFT_3 0xc0 +#define CSR_LEFT_2 0x80 +#define CSR_LEFT_1 0x40 +#define CSR_PACK_ENABLE 0x20 + +#define CSR_DMA_ENABLE 0x10 + +#define CSR_SEND 0x8 /* 1 = send 0 = recv */ +#define CSR_FIFO 0x2 /* reset fifo */ +#define CSR_INTR 0x4 /* interrupt enable */ +#define CSR_SCSI 0x1 + +#define VME_DATA24 0x3d00 + +#endif /* SUN3_SCSI_H */ + |