diff options
Diffstat (limited to 'kernel/drivers/scsi/scsi_proc.c')
| -rw-r--r-- | kernel/drivers/scsi/scsi_proc.c | 481 |
1 files changed, 481 insertions, 0 deletions
diff --git a/kernel/drivers/scsi/scsi_proc.c b/kernel/drivers/scsi/scsi_proc.c new file mode 100644 index 000000000..251598eb3 --- /dev/null +++ b/kernel/drivers/scsi/scsi_proc.c @@ -0,0 +1,481 @@ +/* + * linux/drivers/scsi/scsi_proc.c + * + * The functions in this file provide an interface between + * the PROC file system and the SCSI device drivers + * It is mainly used for debugging, statistics and to pass + * information directly to the lowlevel driver. + * + * (c) 1995 Michael Neuffer neuffer@goofy.zdv.uni-mainz.de + * Version: 0.99.8 last change: 95/09/13 + * + * generic command parser provided by: + * Andreas Heilwagen <crashcar@informatik.uni-koblenz.de> + * + * generic_proc_info() support of xxxx_info() by: + * Michael A. Griffith <grif@acm.org> + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/proc_fs.h> +#include <linux/errno.h> +#include <linux/blkdev.h> +#include <linux/seq_file.h> +#include <linux/mutex.h> +#include <linux/gfp.h> +#include <asm/uaccess.h> + +#include <scsi/scsi.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_host.h> +#include <scsi/scsi_transport.h> + +#include "scsi_priv.h" +#include "scsi_logging.h" + + +/* 4K page size, but our output routines, use some slack for overruns */ +#define PROC_BLOCK_SIZE (3*1024) + +static struct proc_dir_entry *proc_scsi; + +/* Protect sht->present and sht->proc_dir */ +static DEFINE_MUTEX(global_host_template_mutex); + +static ssize_t proc_scsi_host_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + struct Scsi_Host *shost = PDE_DATA(file_inode(file)); + ssize_t ret = -ENOMEM; + char *page; + + if (count > PROC_BLOCK_SIZE) + return -EOVERFLOW; + + if (!shost->hostt->write_info) + return -EINVAL; + + page = (char *)__get_free_page(GFP_KERNEL); + if (page) { + ret = -EFAULT; + if (copy_from_user(page, buf, count)) + goto out; + ret = shost->hostt->write_info(shost, page, count); + } +out: + free_page((unsigned long)page); + return ret; +} + +static int proc_scsi_show(struct seq_file *m, void *v) +{ + struct Scsi_Host *shost = m->private; + return shost->hostt->show_info(m, shost); +} + +static int proc_scsi_host_open(struct inode *inode, struct file *file) +{ + return single_open_size(file, proc_scsi_show, PDE_DATA(inode), + 4 * PAGE_SIZE); +} + +static const struct file_operations proc_scsi_fops = { + .open = proc_scsi_host_open, + .release = single_release, + .read = seq_read, + .llseek = seq_lseek, + .write = proc_scsi_host_write +}; + +/** + * scsi_proc_hostdir_add - Create directory in /proc for a scsi host + * @sht: owner of this directory + * + * Sets sht->proc_dir to the new directory. + */ + +void scsi_proc_hostdir_add(struct scsi_host_template *sht) +{ + if (!sht->show_info) + return; + + mutex_lock(&global_host_template_mutex); + if (!sht->present++) { + sht->proc_dir = proc_mkdir(sht->proc_name, proc_scsi); + if (!sht->proc_dir) + printk(KERN_ERR "%s: proc_mkdir failed for %s\n", + __func__, sht->proc_name); + } + mutex_unlock(&global_host_template_mutex); +} + +/** + * scsi_proc_hostdir_rm - remove directory in /proc for a scsi host + * @sht: owner of directory + */ +void scsi_proc_hostdir_rm(struct scsi_host_template *sht) +{ + if (!sht->show_info) + return; + + mutex_lock(&global_host_template_mutex); + if (!--sht->present && sht->proc_dir) { + remove_proc_entry(sht->proc_name, proc_scsi); + sht->proc_dir = NULL; + } + mutex_unlock(&global_host_template_mutex); +} + + +/** + * scsi_proc_host_add - Add entry for this host to appropriate /proc dir + * @shost: host to add + */ +void scsi_proc_host_add(struct Scsi_Host *shost) +{ + struct scsi_host_template *sht = shost->hostt; + struct proc_dir_entry *p; + char name[10]; + + if (!sht->proc_dir) + return; + + sprintf(name,"%d", shost->host_no); + p = proc_create_data(name, S_IRUGO | S_IWUSR, + sht->proc_dir, &proc_scsi_fops, shost); + if (!p) + printk(KERN_ERR "%s: Failed to register host %d in" + "%s\n", __func__, shost->host_no, + sht->proc_name); +} + +/** + * scsi_proc_host_rm - remove this host's entry from /proc + * @shost: which host + */ +void scsi_proc_host_rm(struct Scsi_Host *shost) +{ + char name[10]; + + if (!shost->hostt->proc_dir) + return; + + sprintf(name,"%d", shost->host_no); + remove_proc_entry(name, shost->hostt->proc_dir); +} +/** + * proc_print_scsidevice - return data about this host + * @dev: A scsi device + * @data: &struct seq_file to output to. + * + * Description: prints Host, Channel, Id, Lun, Vendor, Model, Rev, Type, + * and revision. + */ +static int proc_print_scsidevice(struct device *dev, void *data) +{ + struct scsi_device *sdev; + struct seq_file *s = data; + int i; + + if (!scsi_is_sdev_device(dev)) + goto out; + + sdev = to_scsi_device(dev); + seq_printf(s, + "Host: scsi%d Channel: %02d Id: %02d Lun: %02llu\n Vendor: ", + sdev->host->host_no, sdev->channel, sdev->id, sdev->lun); + for (i = 0; i < 8; i++) { + if (sdev->vendor[i] >= 0x20) + seq_putc(s, sdev->vendor[i]); + else + seq_putc(s, ' '); + } + + seq_puts(s, " Model: "); + for (i = 0; i < 16; i++) { + if (sdev->model[i] >= 0x20) + seq_putc(s, sdev->model[i]); + else + seq_putc(s, ' '); + } + + seq_puts(s, " Rev: "); + for (i = 0; i < 4; i++) { + if (sdev->rev[i] >= 0x20) + seq_putc(s, sdev->rev[i]); + else + seq_putc(s, ' '); + } + + seq_putc(s, '\n'); + + seq_printf(s, " Type: %s ", scsi_device_type(sdev->type)); + seq_printf(s, " ANSI SCSI revision: %02x", + sdev->scsi_level - (sdev->scsi_level > 1)); + if (sdev->scsi_level == 2) + seq_puts(s, " CCS\n"); + else + seq_putc(s, '\n'); + +out: + return 0; +} + +/** + * scsi_add_single_device - Respond to user request to probe for/add device + * @host: user-supplied decimal integer + * @channel: user-supplied decimal integer + * @id: user-supplied decimal integer + * @lun: user-supplied decimal integer + * + * Description: called by writing "scsi add-single-device" to /proc/scsi/scsi. + * + * does scsi_host_lookup() and either user_scan() if that transport + * type supports it, or else scsi_scan_host_selected() + * + * Note: this seems to be aimed exclusively at SCSI parallel busses. + */ + +static int scsi_add_single_device(uint host, uint channel, uint id, uint lun) +{ + struct Scsi_Host *shost; + int error = -ENXIO; + + shost = scsi_host_lookup(host); + if (!shost) + return error; + + if (shost->transportt->user_scan) + error = shost->transportt->user_scan(shost, channel, id, lun); + else + error = scsi_scan_host_selected(shost, channel, id, lun, 1); + scsi_host_put(shost); + return error; +} + +/** + * scsi_remove_single_device - Respond to user request to remove a device + * @host: user-supplied decimal integer + * @channel: user-supplied decimal integer + * @id: user-supplied decimal integer + * @lun: user-supplied decimal integer + * + * Description: called by writing "scsi remove-single-device" to + * /proc/scsi/scsi. Does a scsi_device_lookup() and scsi_remove_device() + */ +static int scsi_remove_single_device(uint host, uint channel, uint id, uint lun) +{ + struct scsi_device *sdev; + struct Scsi_Host *shost; + int error = -ENXIO; + + shost = scsi_host_lookup(host); + if (!shost) + return error; + sdev = scsi_device_lookup(shost, channel, id, lun); + if (sdev) { + scsi_remove_device(sdev); + scsi_device_put(sdev); + error = 0; + } + + scsi_host_put(shost); + return error; +} + +/** + * proc_scsi_write - handle writes to /proc/scsi/scsi + * @file: not used + * @buf: buffer to write + * @length: length of buf, at most PAGE_SIZE + * @ppos: not used + * + * Description: this provides a legacy mechanism to add or remove devices by + * Host, Channel, ID, and Lun. To use, + * "echo 'scsi add-single-device 0 1 2 3' > /proc/scsi/scsi" or + * "echo 'scsi remove-single-device 0 1 2 3' > /proc/scsi/scsi" with + * "0 1 2 3" replaced by the Host, Channel, Id, and Lun. + * + * Note: this seems to be aimed at parallel SCSI. Most modern busses (USB, + * SATA, Firewire, Fibre Channel, etc) dynamically assign these values to + * provide a unique identifier and nothing more. + */ + + +static ssize_t proc_scsi_write(struct file *file, const char __user *buf, + size_t length, loff_t *ppos) +{ + int host, channel, id, lun; + char *buffer, *p; + int err; + + if (!buf || length > PAGE_SIZE) + return -EINVAL; + + buffer = (char *)__get_free_page(GFP_KERNEL); + if (!buffer) + return -ENOMEM; + + err = -EFAULT; + if (copy_from_user(buffer, buf, length)) + goto out; + + err = -EINVAL; + if (length < PAGE_SIZE) + buffer[length] = '\0'; + else if (buffer[PAGE_SIZE-1]) + goto out; + + /* + * Usage: echo "scsi add-single-device 0 1 2 3" >/proc/scsi/scsi + * with "0 1 2 3" replaced by your "Host Channel Id Lun". + */ + if (!strncmp("scsi add-single-device", buffer, 22)) { + p = buffer + 23; + + host = simple_strtoul(p, &p, 0); + channel = simple_strtoul(p + 1, &p, 0); + id = simple_strtoul(p + 1, &p, 0); + lun = simple_strtoul(p + 1, &p, 0); + + err = scsi_add_single_device(host, channel, id, lun); + + /* + * Usage: echo "scsi remove-single-device 0 1 2 3" >/proc/scsi/scsi + * with "0 1 2 3" replaced by your "Host Channel Id Lun". + */ + } else if (!strncmp("scsi remove-single-device", buffer, 25)) { + p = buffer + 26; + + host = simple_strtoul(p, &p, 0); + channel = simple_strtoul(p + 1, &p, 0); + id = simple_strtoul(p + 1, &p, 0); + lun = simple_strtoul(p + 1, &p, 0); + + err = scsi_remove_single_device(host, channel, id, lun); + } + + /* + * convert success returns so that we return the + * number of bytes consumed. + */ + if (!err) + err = length; + + out: + free_page((unsigned long)buffer); + return err; +} + +static int always_match(struct device *dev, void *data) +{ + return 1; +} + +static inline struct device *next_scsi_device(struct device *start) +{ + struct device *next = bus_find_device(&scsi_bus_type, start, NULL, + always_match); + put_device(start); + return next; +} + +static void *scsi_seq_start(struct seq_file *sfile, loff_t *pos) +{ + struct device *dev = NULL; + loff_t n = *pos; + + while ((dev = next_scsi_device(dev))) { + if (!n--) + break; + sfile->private++; + } + return dev; +} + +static void *scsi_seq_next(struct seq_file *sfile, void *v, loff_t *pos) +{ + (*pos)++; + sfile->private++; + return next_scsi_device(v); +} + +static void scsi_seq_stop(struct seq_file *sfile, void *v) +{ + put_device(v); +} + +static int scsi_seq_show(struct seq_file *sfile, void *dev) +{ + if (!sfile->private) + seq_puts(sfile, "Attached devices:\n"); + + return proc_print_scsidevice(dev, sfile); +} + +static const struct seq_operations scsi_seq_ops = { + .start = scsi_seq_start, + .next = scsi_seq_next, + .stop = scsi_seq_stop, + .show = scsi_seq_show +}; + +/** + * proc_scsi_open - glue function + * @inode: not used + * @file: passed to single_open() + * + * Associates proc_scsi_show with this file + */ +static int proc_scsi_open(struct inode *inode, struct file *file) +{ + /* + * We don't really need this for the write case but it doesn't + * harm either. + */ + return seq_open(file, &scsi_seq_ops); +} + +static const struct file_operations proc_scsi_operations = { + .owner = THIS_MODULE, + .open = proc_scsi_open, + .read = seq_read, + .write = proc_scsi_write, + .llseek = seq_lseek, + .release = seq_release, +}; + +/** + * scsi_init_procfs - create scsi and scsi/scsi in procfs + */ +int __init scsi_init_procfs(void) +{ + struct proc_dir_entry *pde; + + proc_scsi = proc_mkdir("scsi", NULL); + if (!proc_scsi) + goto err1; + + pde = proc_create("scsi/scsi", 0, NULL, &proc_scsi_operations); + if (!pde) + goto err2; + + return 0; + +err2: + remove_proc_entry("scsi", NULL); +err1: + return -ENOMEM; +} + +/** + * scsi_exit_procfs - Remove scsi/scsi and scsi from procfs + */ +void scsi_exit_procfs(void) +{ + remove_proc_entry("scsi/scsi", NULL); + remove_proc_entry("scsi", NULL); +} |