diff options
Diffstat (limited to 'kernel/drivers/scsi/scsi_ioctl.c')
| -rw-r--r-- | kernel/drivers/scsi/scsi_ioctl.c | 289 |
1 files changed, 289 insertions, 0 deletions
diff --git a/kernel/drivers/scsi/scsi_ioctl.c b/kernel/drivers/scsi/scsi_ioctl.c new file mode 100644 index 000000000..c4f7b56fa --- /dev/null +++ b/kernel/drivers/scsi/scsi_ioctl.c @@ -0,0 +1,289 @@ +/* + * Changes: + * Arnaldo Carvalho de Melo <acme@conectiva.com.br> 08/23/2000 + * - get rid of some verify_areas and use __copy*user and __get/put_user + * for the ones that remain + */ +#include <linux/module.h> +#include <linux/blkdev.h> +#include <linux/interrupt.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/string.h> +#include <asm/uaccess.h> + +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_eh.h> +#include <scsi/scsi_host.h> +#include <scsi/scsi_ioctl.h> +#include <scsi/sg.h> +#include <scsi/scsi_dbg.h> + +#include "scsi_logging.h" + +#define NORMAL_RETRIES 5 +#define IOCTL_NORMAL_TIMEOUT (10 * HZ) + +#define MAX_BUF PAGE_SIZE + +/** + * ioctl_probe -- return host identification + * @host: host to identify + * @buffer: userspace buffer for identification + * + * Return an identifying string at @buffer, if @buffer is non-NULL, filling + * to the length stored at * (int *) @buffer. + */ +static int ioctl_probe(struct Scsi_Host *host, void __user *buffer) +{ + unsigned int len, slen; + const char *string; + + if (buffer) { + if (get_user(len, (unsigned int __user *) buffer)) + return -EFAULT; + + if (host->hostt->info) + string = host->hostt->info(host); + else + string = host->hostt->name; + if (string) { + slen = strlen(string); + if (len > slen) + len = slen + 1; + if (copy_to_user(buffer, string, len)) + return -EFAULT; + } + } + return 1; +} + +/* + + * The SCSI_IOCTL_SEND_COMMAND ioctl sends a command out to the SCSI host. + * The IOCTL_NORMAL_TIMEOUT and NORMAL_RETRIES variables are used. + * + * dev is the SCSI device struct ptr, *(int *) arg is the length of the + * input data, if any, not including the command string & counts, + * *((int *)arg + 1) is the output buffer size in bytes. + * + * *(char *) ((int *) arg)[2] the actual command byte. + * + * Note that if more than MAX_BUF bytes are requested to be transferred, + * the ioctl will fail with error EINVAL. + * + * This size *does not* include the initial lengths that were passed. + * + * The SCSI command is read from the memory location immediately after the + * length words, and the input data is right after the command. The SCSI + * routines know the command size based on the opcode decode. + * + * The output area is then filled in starting from the command byte. + */ + +static int ioctl_internal_command(struct scsi_device *sdev, char *cmd, + int timeout, int retries) +{ + int result; + struct scsi_sense_hdr sshdr; + + SCSI_LOG_IOCTL(1, sdev_printk(KERN_INFO, sdev, + "Trying ioctl with scsi command %d\n", *cmd)); + + result = scsi_execute_req(sdev, cmd, DMA_NONE, NULL, 0, + &sshdr, timeout, retries, NULL); + + SCSI_LOG_IOCTL(2, sdev_printk(KERN_INFO, sdev, + "Ioctl returned 0x%x\n", result)); + + if ((driver_byte(result) & DRIVER_SENSE) && + (scsi_sense_valid(&sshdr))) { + switch (sshdr.sense_key) { + case ILLEGAL_REQUEST: + if (cmd[0] == ALLOW_MEDIUM_REMOVAL) + sdev->lockable = 0; + else + sdev_printk(KERN_INFO, sdev, + "ioctl_internal_command: " + "ILLEGAL REQUEST " + "asc=0x%x ascq=0x%x\n", + sshdr.asc, sshdr.ascq); + break; + case NOT_READY: /* This happens if there is no disc in drive */ + if (sdev->removable) + break; + case UNIT_ATTENTION: + if (sdev->removable) { + sdev->changed = 1; + result = 0; /* This is no longer considered an error */ + break; + } + default: /* Fall through for non-removable media */ + sdev_printk(KERN_INFO, sdev, + "ioctl_internal_command return code = %x\n", + result); + scsi_print_sense_hdr(sdev, NULL, &sshdr); + break; + } + } + + SCSI_LOG_IOCTL(2, sdev_printk(KERN_INFO, sdev, + "IOCTL Releasing command\n")); + return result; +} + +int scsi_set_medium_removal(struct scsi_device *sdev, char state) +{ + char scsi_cmd[MAX_COMMAND_SIZE]; + int ret; + + if (!sdev->removable || !sdev->lockable) + return 0; + + scsi_cmd[0] = ALLOW_MEDIUM_REMOVAL; + scsi_cmd[1] = 0; + scsi_cmd[2] = 0; + scsi_cmd[3] = 0; + scsi_cmd[4] = state; + scsi_cmd[5] = 0; + + ret = ioctl_internal_command(sdev, scsi_cmd, + IOCTL_NORMAL_TIMEOUT, NORMAL_RETRIES); + if (ret == 0) + sdev->locked = (state == SCSI_REMOVAL_PREVENT); + return ret; +} +EXPORT_SYMBOL(scsi_set_medium_removal); + +/* + * The scsi_ioctl_get_pci() function places into arg the value + * pci_dev::slot_name (8 characters) for the PCI device (if any). + * Returns: 0 on success + * -ENXIO if there isn't a PCI device pointer + * (could be because the SCSI driver hasn't been + * updated yet, or because it isn't a SCSI + * device) + * any copy_to_user() error on failure there + */ +static int scsi_ioctl_get_pci(struct scsi_device *sdev, void __user *arg) +{ + struct device *dev = scsi_get_device(sdev->host); + const char *name; + + if (!dev) + return -ENXIO; + + name = dev_name(dev); + + /* compatibility with old ioctl which only returned + * 20 characters */ + return copy_to_user(arg, name, min(strlen(name), (size_t)20)) + ? -EFAULT: 0; +} + + +/** + * scsi_ioctl - Dispatch ioctl to scsi device + * @sdev: scsi device receiving ioctl + * @cmd: which ioctl is it + * @arg: data associated with ioctl + * + * Description: The scsi_ioctl() function differs from most ioctls in that it + * does not take a major/minor number as the dev field. Rather, it takes + * a pointer to a &struct scsi_device. + */ +int scsi_ioctl(struct scsi_device *sdev, int cmd, void __user *arg) +{ + char scsi_cmd[MAX_COMMAND_SIZE]; + + /* Check for deprecated ioctls ... all the ioctls which don't + * follow the new unique numbering scheme are deprecated */ + switch (cmd) { + case SCSI_IOCTL_SEND_COMMAND: + case SCSI_IOCTL_TEST_UNIT_READY: + case SCSI_IOCTL_BENCHMARK_COMMAND: + case SCSI_IOCTL_SYNC: + case SCSI_IOCTL_START_UNIT: + case SCSI_IOCTL_STOP_UNIT: + printk(KERN_WARNING "program %s is using a deprecated SCSI " + "ioctl, please convert it to SG_IO\n", current->comm); + break; + default: + break; + } + + switch (cmd) { + case SCSI_IOCTL_GET_IDLUN: + if (!access_ok(VERIFY_WRITE, arg, sizeof(struct scsi_idlun))) + return -EFAULT; + + __put_user((sdev->id & 0xff) + + ((sdev->lun & 0xff) << 8) + + ((sdev->channel & 0xff) << 16) + + ((sdev->host->host_no & 0xff) << 24), + &((struct scsi_idlun __user *)arg)->dev_id); + __put_user(sdev->host->unique_id, + &((struct scsi_idlun __user *)arg)->host_unique_id); + return 0; + case SCSI_IOCTL_GET_BUS_NUMBER: + return put_user(sdev->host->host_no, (int __user *)arg); + case SCSI_IOCTL_PROBE_HOST: + return ioctl_probe(sdev->host, arg); + case SCSI_IOCTL_SEND_COMMAND: + if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO)) + return -EACCES; + return sg_scsi_ioctl(sdev->request_queue, NULL, 0, arg); + case SCSI_IOCTL_DOORLOCK: + return scsi_set_medium_removal(sdev, SCSI_REMOVAL_PREVENT); + case SCSI_IOCTL_DOORUNLOCK: + return scsi_set_medium_removal(sdev, SCSI_REMOVAL_ALLOW); + case SCSI_IOCTL_TEST_UNIT_READY: + return scsi_test_unit_ready(sdev, IOCTL_NORMAL_TIMEOUT, + NORMAL_RETRIES, NULL); + case SCSI_IOCTL_START_UNIT: + scsi_cmd[0] = START_STOP; + scsi_cmd[1] = 0; + scsi_cmd[2] = scsi_cmd[3] = scsi_cmd[5] = 0; + scsi_cmd[4] = 1; + return ioctl_internal_command(sdev, scsi_cmd, + START_STOP_TIMEOUT, NORMAL_RETRIES); + case SCSI_IOCTL_STOP_UNIT: + scsi_cmd[0] = START_STOP; + scsi_cmd[1] = 0; + scsi_cmd[2] = scsi_cmd[3] = scsi_cmd[5] = 0; + scsi_cmd[4] = 0; + return ioctl_internal_command(sdev, scsi_cmd, + START_STOP_TIMEOUT, NORMAL_RETRIES); + case SCSI_IOCTL_GET_PCI: + return scsi_ioctl_get_pci(sdev, arg); + case SG_SCSI_RESET: + return scsi_ioctl_reset(sdev, arg); + default: + if (sdev->host->hostt->ioctl) + return sdev->host->hostt->ioctl(sdev, cmd, arg); + } + return -EINVAL; +} +EXPORT_SYMBOL(scsi_ioctl); + +/* + * We can process a reset even when a device isn't fully operable. + */ +int scsi_ioctl_block_when_processing_errors(struct scsi_device *sdev, int cmd, + bool ndelay) +{ + if (cmd == SG_SCSI_RESET && ndelay) { + if (scsi_host_in_recovery(sdev->host)) + return -EAGAIN; + } else { + if (!scsi_block_when_processing_errors(sdev)) + return -ENODEV; + } + + return 0; +} +EXPORT_SYMBOL_GPL(scsi_ioctl_block_when_processing_errors); |