summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/scsi/pcmcia/aha152x_stub.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/scsi/pcmcia/aha152x_stub.c')
-rw-r--r--kernel/drivers/scsi/pcmcia/aha152x_stub.c235
1 files changed, 235 insertions, 0 deletions
diff --git a/kernel/drivers/scsi/pcmcia/aha152x_stub.c b/kernel/drivers/scsi/pcmcia/aha152x_stub.c
new file mode 100644
index 000000000..7d1609fa2
--- /dev/null
+++ b/kernel/drivers/scsi/pcmcia/aha152x_stub.c
@@ -0,0 +1,235 @@
+/*======================================================================
+
+ A driver for Adaptec AHA152X-compatible PCMCIA SCSI cards.
+
+ This driver supports the Adaptec AHA-1460, the New Media Bus
+ Toaster, and the New Media Toast & Jam.
+
+ aha152x_cs.c 1.54 2000/06/12 21:27:25
+
+ The contents of this file are subject to the Mozilla Public
+ License Version 1.1 (the "License"); you may not use this file
+ except in compliance with the License. You may obtain a copy of
+ the License at http://www.mozilla.org/MPL/
+
+ Software distributed under the License is distributed on an "AS
+ IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
+ implied. See the License for the specific language governing
+ rights and limitations under the License.
+
+ The initial developer of the original code is David A. Hinds
+ <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
+ are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
+
+ Alternatively, the contents of this file may be used under the
+ terms of the GNU General Public License version 2 (the "GPL"), in which
+ case the provisions of the GPL are applicable instead of the
+ above. If you wish to allow the use of your version of this file
+ only under the terms of the GPL and not to allow others to use
+ your version of this file under the MPL, indicate your decision
+ by deleting the provisions above and replace them with the notice
+ and other provisions required by the GPL. If you do not delete
+ the provisions above, a recipient may use your version of this
+ file under either the MPL or the GPL.
+
+======================================================================*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/ioport.h>
+#include <scsi/scsi.h>
+#include <linux/major.h>
+#include <linux/blkdev.h>
+#include <scsi/scsi_ioctl.h>
+
+#include "scsi.h"
+#include <scsi/scsi_host.h>
+#include "aha152x.h"
+
+#include <pcmcia/cistpl.h>
+#include <pcmcia/ds.h>
+
+
+/*====================================================================*/
+
+/* Parameters that can be set with 'insmod' */
+
+/* SCSI bus setup options */
+static int host_id = 7;
+static int reconnect = 1;
+static int parity = 1;
+static int synchronous = 1;
+static int reset_delay = 100;
+static int ext_trans = 0;
+
+module_param(host_id, int, 0);
+module_param(reconnect, int, 0);
+module_param(parity, int, 0);
+module_param(synchronous, int, 0);
+module_param(reset_delay, int, 0);
+module_param(ext_trans, int, 0);
+
+MODULE_LICENSE("Dual MPL/GPL");
+
+/*====================================================================*/
+
+typedef struct scsi_info_t {
+ struct pcmcia_device *p_dev;
+ struct Scsi_Host *host;
+} scsi_info_t;
+
+static void aha152x_release_cs(struct pcmcia_device *link);
+static void aha152x_detach(struct pcmcia_device *p_dev);
+static int aha152x_config_cs(struct pcmcia_device *link);
+
+static int aha152x_probe(struct pcmcia_device *link)
+{
+ scsi_info_t *info;
+
+ dev_dbg(&link->dev, "aha152x_attach()\n");
+
+ /* Create new SCSI device */
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (!info) return -ENOMEM;
+ info->p_dev = link;
+ link->priv = info;
+
+ link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
+ link->config_regs = PRESENT_OPTION;
+
+ return aha152x_config_cs(link);
+} /* aha152x_attach */
+
+/*====================================================================*/
+
+static void aha152x_detach(struct pcmcia_device *link)
+{
+ dev_dbg(&link->dev, "aha152x_detach\n");
+
+ aha152x_release_cs(link);
+
+ /* Unlink device structure, free bits */
+ kfree(link->priv);
+} /* aha152x_detach */
+
+/*====================================================================*/
+
+static int aha152x_config_check(struct pcmcia_device *p_dev, void *priv_data)
+{
+ p_dev->io_lines = 10;
+
+ /* For New Media T&J, look for a SCSI window */
+ if ((p_dev->resource[0]->end < 0x20) &&
+ (p_dev->resource[1]->end >= 0x20))
+ p_dev->resource[0]->start = p_dev->resource[1]->start;
+
+ if (p_dev->resource[0]->start >= 0xffff)
+ return -EINVAL;
+
+ p_dev->resource[1]->start = p_dev->resource[1]->end = 0;
+ p_dev->resource[0]->end = 0x20;
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
+
+ return pcmcia_request_io(p_dev);
+}
+
+static int aha152x_config_cs(struct pcmcia_device *link)
+{
+ scsi_info_t *info = link->priv;
+ struct aha152x_setup s;
+ int ret;
+ struct Scsi_Host *host;
+
+ dev_dbg(&link->dev, "aha152x_config\n");
+
+ ret = pcmcia_loop_config(link, aha152x_config_check, NULL);
+ if (ret)
+ goto failed;
+
+ if (!link->irq)
+ goto failed;
+
+ ret = pcmcia_enable_device(link);
+ if (ret)
+ goto failed;
+
+ /* Set configuration options for the aha152x driver */
+ memset(&s, 0, sizeof(s));
+ s.conf = "PCMCIA setup";
+ s.io_port = link->resource[0]->start;
+ s.irq = link->irq;
+ s.scsiid = host_id;
+ s.reconnect = reconnect;
+ s.parity = parity;
+ s.synchronous = synchronous;
+ s.delay = reset_delay;
+ if (ext_trans)
+ s.ext_trans = ext_trans;
+
+ host = aha152x_probe_one(&s);
+ if (host == NULL) {
+ printk(KERN_INFO "aha152x_cs: no SCSI devices found\n");
+ goto failed;
+ }
+
+ info->host = host;
+
+ return 0;
+
+failed:
+ aha152x_release_cs(link);
+ return -ENODEV;
+}
+
+static void aha152x_release_cs(struct pcmcia_device *link)
+{
+ scsi_info_t *info = link->priv;
+
+ aha152x_release(info->host);
+ pcmcia_disable_device(link);
+}
+
+static int aha152x_resume(struct pcmcia_device *link)
+{
+ scsi_info_t *info = link->priv;
+
+ aha152x_host_reset_host(info->host);
+
+ return 0;
+}
+
+static const struct pcmcia_device_id aha152x_ids[] = {
+ PCMCIA_DEVICE_PROD_ID123("New Media", "SCSI", "Bus Toaster", 0xcdf7e4cc, 0x35f26476, 0xa8851d6e),
+ PCMCIA_DEVICE_PROD_ID123("NOTEWORTHY", "SCSI", "Bus Toaster", 0xad89c6e8, 0x35f26476, 0xa8851d6e),
+ PCMCIA_DEVICE_PROD_ID12("Adaptec, Inc.", "APA-1460 SCSI Host Adapter", 0x24ba9738, 0x3a3c3d20),
+ PCMCIA_DEVICE_PROD_ID12("New Media Corporation", "Multimedia Sound/SCSI", 0x085a850b, 0x80a6535c),
+ PCMCIA_DEVICE_PROD_ID12("NOTEWORTHY", "NWCOMB02 SCSI/AUDIO COMBO CARD", 0xad89c6e8, 0x5f9a615b),
+ PCMCIA_DEVICE_NULL,
+};
+MODULE_DEVICE_TABLE(pcmcia, aha152x_ids);
+
+static struct pcmcia_driver aha152x_cs_driver = {
+ .owner = THIS_MODULE,
+ .name = "aha152x_cs",
+ .probe = aha152x_probe,
+ .remove = aha152x_detach,
+ .id_table = aha152x_ids,
+ .resume = aha152x_resume,
+};
+
+static int __init init_aha152x_cs(void)
+{
+ return pcmcia_register_driver(&aha152x_cs_driver);
+}
+
+static void __exit exit_aha152x_cs(void)
+{
+ pcmcia_unregister_driver(&aha152x_cs_driver);
+}
+
+module_init(init_aha152x_cs);
+module_exit(exit_aha152x_cs);