diff options
Diffstat (limited to 'kernel/drivers/scsi/ncr53c8xx.c')
| -rw-r--r-- | kernel/drivers/scsi/ncr53c8xx.c | 8626 |
1 files changed, 8626 insertions, 0 deletions
diff --git a/kernel/drivers/scsi/ncr53c8xx.c b/kernel/drivers/scsi/ncr53c8xx.c new file mode 100644 index 000000000..5b93ed810 --- /dev/null +++ b/kernel/drivers/scsi/ncr53c8xx.c @@ -0,0 +1,8626 @@ +/****************************************************************************** +** Device driver for the PCI-SCSI NCR538XX controller family. +** +** Copyright (C) 1994 Wolfgang Stanglmeier +** +** This program is free software; you can redistribute it and/or modify +** it under the terms of the GNU General Public License as published by +** the Free Software Foundation; either version 2 of the License, or +** (at your option) any later version. +** +** This program is distributed in the hope that it will be useful, +** but WITHOUT ANY WARRANTY; without even the implied warranty of +** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +** GNU General Public License for more details. +** +** You should have received a copy of the GNU General Public License +** along with this program; if not, write to the Free Software +** Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +** +**----------------------------------------------------------------------------- +** +** This driver has been ported to Linux from the FreeBSD NCR53C8XX driver +** and is currently maintained by +** +** Gerard Roudier <groudier@free.fr> +** +** Being given that this driver originates from the FreeBSD version, and +** in order to keep synergy on both, any suggested enhancements and corrections +** received on Linux are automatically a potential candidate for the FreeBSD +** version. +** +** The original driver has been written for 386bsd and FreeBSD by +** Wolfgang Stanglmeier <wolf@cologne.de> +** Stefan Esser <se@mi.Uni-Koeln.de> +** +** And has been ported to NetBSD by +** Charles M. Hannum <mycroft@gnu.ai.mit.edu> +** +**----------------------------------------------------------------------------- +** +** Brief history +** +** December 10 1995 by Gerard Roudier: +** Initial port to Linux. +** +** June 23 1996 by Gerard Roudier: +** Support for 64 bits architectures (Alpha). +** +** November 30 1996 by Gerard Roudier: +** Support for Fast-20 scsi. +** Support for large DMA fifo and 128 dwords bursting. +** +** February 27 1997 by Gerard Roudier: +** Support for Fast-40 scsi. +** Support for on-Board RAM. +** +** May 3 1997 by Gerard Roudier: +** Full support for scsi scripts instructions pre-fetching. +** +** May 19 1997 by Richard Waltham <dormouse@farsrobt.demon.co.uk>: +** Support for NvRAM detection and reading. +** +** August 18 1997 by Cort <cort@cs.nmt.edu>: +** Support for Power/PC (Big Endian). +** +** June 20 1998 by Gerard Roudier +** Support for up to 64 tags per lun. +** O(1) everywhere (C and SCRIPTS) for normal cases. +** Low PCI traffic for command handling when on-chip RAM is present. +** Aggressive SCSI SCRIPTS optimizations. +** +** 2005 by Matthew Wilcox and James Bottomley +** PCI-ectomy. This driver now supports only the 720 chip (see the +** NCR_Q720 and zalon drivers for the bus probe logic). +** +******************************************************************************* +*/ + +/* +** Supported SCSI-II features: +** Synchronous negotiation +** Wide negotiation (depends on the NCR Chip) +** Enable disconnection +** Tagged command queuing +** Parity checking +** Etc... +** +** Supported NCR/SYMBIOS chips: +** 53C720 (Wide, Fast SCSI-2, intfly problems) +*/ + +/* Name and version of the driver */ +#define SCSI_NCR_DRIVER_NAME "ncr53c8xx-3.4.3g" + +#define SCSI_NCR_DEBUG_FLAGS (0) + +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/errno.h> +#include <linux/gfp.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/signal.h> +#include <linux/spinlock.h> +#include <linux/stat.h> +#include <linux/string.h> +#include <linux/time.h> +#include <linux/timer.h> +#include <linux/types.h> + +#include <asm/dma.h> +#include <asm/io.h> + +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_dbg.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_tcq.h> +#include <scsi/scsi_transport.h> +#include <scsi/scsi_transport_spi.h> + +#include "ncr53c8xx.h" + +#define NAME53C8XX "ncr53c8xx" + +/*========================================================== +** +** Debugging tags +** +**========================================================== +*/ + +#define DEBUG_ALLOC (0x0001) +#define DEBUG_PHASE (0x0002) +#define DEBUG_QUEUE (0x0008) +#define DEBUG_RESULT (0x0010) +#define DEBUG_POINTER (0x0020) +#define DEBUG_SCRIPT (0x0040) +#define DEBUG_TINY (0x0080) +#define DEBUG_TIMING (0x0100) +#define DEBUG_NEGO (0x0200) +#define DEBUG_TAGS (0x0400) +#define DEBUG_SCATTER (0x0800) +#define DEBUG_IC (0x1000) + +/* +** Enable/Disable debug messages. +** Can be changed at runtime too. +*/ + +#ifdef SCSI_NCR_DEBUG_INFO_SUPPORT +static int ncr_debug = SCSI_NCR_DEBUG_FLAGS; + #define DEBUG_FLAGS ncr_debug +#else + #define DEBUG_FLAGS SCSI_NCR_DEBUG_FLAGS +#endif + +static inline struct list_head *ncr_list_pop(struct list_head *head) +{ + if (!list_empty(head)) { + struct list_head *elem = head->next; + + list_del(elem); + return elem; + } + + return NULL; +} + +/*========================================================== +** +** Simple power of two buddy-like allocator. +** +** This simple code is not intended to be fast, but to +** provide power of 2 aligned memory allocations. +** Since the SCRIPTS processor only supplies 8 bit +** arithmetic, this allocator allows simple and fast +** address calculations from the SCRIPTS code. +** In addition, cache line alignment is guaranteed for +** power of 2 cache line size. +** Enhanced in linux-2.3.44 to provide a memory pool +** per pcidev to support dynamic dma mapping. (I would +** have preferred a real bus abstraction, btw). +** +**========================================================== +*/ + +#define MEMO_SHIFT 4 /* 16 bytes minimum memory chunk */ +#if PAGE_SIZE >= 8192 +#define MEMO_PAGE_ORDER 0 /* 1 PAGE maximum */ +#else +#define MEMO_PAGE_ORDER 1 /* 2 PAGES maximum */ +#endif +#define MEMO_FREE_UNUSED /* Free unused pages immediately */ +#define MEMO_WARN 1 +#define MEMO_GFP_FLAGS GFP_ATOMIC +#define MEMO_CLUSTER_SHIFT (PAGE_SHIFT+MEMO_PAGE_ORDER) +#define MEMO_CLUSTER_SIZE (1UL << MEMO_CLUSTER_SHIFT) +#define MEMO_CLUSTER_MASK (MEMO_CLUSTER_SIZE-1) + +typedef u_long m_addr_t; /* Enough bits to bit-hack addresses */ +typedef struct device *m_bush_t; /* Something that addresses DMAable */ + +typedef struct m_link { /* Link between free memory chunks */ + struct m_link *next; +} m_link_s; + +typedef struct m_vtob { /* Virtual to Bus address translation */ + struct m_vtob *next; + m_addr_t vaddr; + m_addr_t baddr; +} m_vtob_s; +#define VTOB_HASH_SHIFT 5 +#define VTOB_HASH_SIZE (1UL << VTOB_HASH_SHIFT) +#define VTOB_HASH_MASK (VTOB_HASH_SIZE-1) +#define VTOB_HASH_CODE(m) \ + ((((m_addr_t) (m)) >> MEMO_CLUSTER_SHIFT) & VTOB_HASH_MASK) + +typedef struct m_pool { /* Memory pool of a given kind */ + m_bush_t bush; + m_addr_t (*getp)(struct m_pool *); + void (*freep)(struct m_pool *, m_addr_t); + int nump; + m_vtob_s *(vtob[VTOB_HASH_SIZE]); + struct m_pool *next; + struct m_link h[PAGE_SHIFT-MEMO_SHIFT+MEMO_PAGE_ORDER+1]; +} m_pool_s; + +static void *___m_alloc(m_pool_s *mp, int size) +{ + int i = 0; + int s = (1 << MEMO_SHIFT); + int j; + m_addr_t a; + m_link_s *h = mp->h; + + if (size > (PAGE_SIZE << MEMO_PAGE_ORDER)) + return NULL; + + while (size > s) { + s <<= 1; + ++i; + } + + j = i; + while (!h[j].next) { + if (s == (PAGE_SIZE << MEMO_PAGE_ORDER)) { + h[j].next = (m_link_s *)mp->getp(mp); + if (h[j].next) + h[j].next->next = NULL; + break; + } + ++j; + s <<= 1; + } + a = (m_addr_t) h[j].next; + if (a) { + h[j].next = h[j].next->next; + while (j > i) { + j -= 1; + s >>= 1; + h[j].next = (m_link_s *) (a+s); + h[j].next->next = NULL; + } + } +#ifdef DEBUG + printk("___m_alloc(%d) = %p\n", size, (void *) a); +#endif + return (void *) a; +} + +static void ___m_free(m_pool_s *mp, void *ptr, int size) +{ + int i = 0; + int s = (1 << MEMO_SHIFT); + m_link_s *q; + m_addr_t a, b; + m_link_s *h = mp->h; + +#ifdef DEBUG + printk("___m_free(%p, %d)\n", ptr, size); +#endif + + if (size > (PAGE_SIZE << MEMO_PAGE_ORDER)) + return; + + while (size > s) { + s <<= 1; + ++i; + } + + a = (m_addr_t) ptr; + + while (1) { +#ifdef MEMO_FREE_UNUSED + if (s == (PAGE_SIZE << MEMO_PAGE_ORDER)) { + mp->freep(mp, a); + break; + } +#endif + b = a ^ s; + q = &h[i]; + while (q->next && q->next != (m_link_s *) b) { + q = q->next; + } + if (!q->next) { + ((m_link_s *) a)->next = h[i].next; + h[i].next = (m_link_s *) a; + break; + } + q->next = q->next->next; + a = a & b; + s <<= 1; + ++i; + } +} + +static DEFINE_SPINLOCK(ncr53c8xx_lock); + +static void *__m_calloc2(m_pool_s *mp, int size, char *name, int uflags) +{ + void *p; + + p = ___m_alloc(mp, size); + + if (DEBUG_FLAGS & DEBUG_ALLOC) + printk ("new %-10s[%4d] @%p.\n", name, size, p); + + if (p) + memset(p, 0, size); + else if (uflags & MEMO_WARN) + printk (NAME53C8XX ": failed to allocate %s[%d]\n", name, size); + + return p; +} + +#define __m_calloc(mp, s, n) __m_calloc2(mp, s, n, MEMO_WARN) + +static void __m_free(m_pool_s *mp, void *ptr, int size, char *name) +{ + if (DEBUG_FLAGS & DEBUG_ALLOC) + printk ("freeing %-10s[%4d] @%p.\n", name, size, ptr); + + ___m_free(mp, ptr, size); + +} + +/* + * With pci bus iommu support, we use a default pool of unmapped memory + * for memory we donnot need to DMA from/to and one pool per pcidev for + * memory accessed by the PCI chip. `mp0' is the default not DMAable pool. + */ + +static m_addr_t ___mp0_getp(m_pool_s *mp) +{ + m_addr_t m = __get_free_pages(MEMO_GFP_FLAGS, MEMO_PAGE_ORDER); + if (m) + ++mp->nump; + return m; +} + +static void ___mp0_freep(m_pool_s *mp, m_addr_t m) +{ + free_pages(m, MEMO_PAGE_ORDER); + --mp->nump; +} + +static m_pool_s mp0 = {NULL, ___mp0_getp, ___mp0_freep}; + +/* + * DMAable pools. + */ + +/* + * With pci bus iommu support, we maintain one pool per pcidev and a + * hashed reverse table for virtual to bus physical address translations. + */ +static m_addr_t ___dma_getp(m_pool_s *mp) +{ + m_addr_t vp; + m_vtob_s *vbp; + + vbp = __m_calloc(&mp0, sizeof(*vbp), "VTOB"); + if (vbp) { + dma_addr_t daddr; + vp = (m_addr_t) dma_alloc_coherent(mp->bush, + PAGE_SIZE<<MEMO_PAGE_ORDER, + &daddr, GFP_ATOMIC); + if (vp) { + int hc = VTOB_HASH_CODE(vp); + vbp->vaddr = vp; + vbp->baddr = daddr; + vbp->next = mp->vtob[hc]; + mp->vtob[hc] = vbp; + ++mp->nump; + return vp; + } + } + if (vbp) + __m_free(&mp0, vbp, sizeof(*vbp), "VTOB"); + return 0; +} + +static void ___dma_freep(m_pool_s *mp, m_addr_t m) +{ + m_vtob_s **vbpp, *vbp; + int hc = VTOB_HASH_CODE(m); + + vbpp = &mp->vtob[hc]; + while (*vbpp && (*vbpp)->vaddr != m) + vbpp = &(*vbpp)->next; + if (*vbpp) { + vbp = *vbpp; + *vbpp = (*vbpp)->next; + dma_free_coherent(mp->bush, PAGE_SIZE<<MEMO_PAGE_ORDER, + (void *)vbp->vaddr, (dma_addr_t)vbp->baddr); + __m_free(&mp0, vbp, sizeof(*vbp), "VTOB"); + --mp->nump; + } +} + +static inline m_pool_s *___get_dma_pool(m_bush_t bush) +{ + m_pool_s *mp; + for (mp = mp0.next; mp && mp->bush != bush; mp = mp->next); + return mp; +} + +static m_pool_s *___cre_dma_pool(m_bush_t bush) +{ + m_pool_s *mp; + mp = __m_calloc(&mp0, sizeof(*mp), "MPOOL"); + if (mp) { + memset(mp, 0, sizeof(*mp)); + mp->bush = bush; + mp->getp = ___dma_getp; + mp->freep = ___dma_freep; + mp->next = mp0.next; + mp0.next = mp; + } + return mp; +} + +static void ___del_dma_pool(m_pool_s *p) +{ + struct m_pool **pp = &mp0.next; + + while (*pp && *pp != p) + pp = &(*pp)->next; + if (*pp) { + *pp = (*pp)->next; + __m_free(&mp0, p, sizeof(*p), "MPOOL"); + } +} + +static void *__m_calloc_dma(m_bush_t bush, int size, char *name) +{ + u_long flags; + struct m_pool *mp; + void *m = NULL; + + spin_lock_irqsave(&ncr53c8xx_lock, flags); + mp = ___get_dma_pool(bush); + if (!mp) + mp = ___cre_dma_pool(bush); + if (mp) + m = __m_calloc(mp, size, name); + if (mp && !mp->nump) + ___del_dma_pool(mp); + spin_unlock_irqrestore(&ncr53c8xx_lock, flags); + + return m; +} + +static void __m_free_dma(m_bush_t bush, void *m, int size, char *name) +{ + u_long flags; + struct m_pool *mp; + + spin_lock_irqsave(&ncr53c8xx_lock, flags); + mp = ___get_dma_pool(bush); + if (mp) + __m_free(mp, m, size, name); + if (mp && !mp->nump) + ___del_dma_pool(mp); + spin_unlock_irqrestore(&ncr53c8xx_lock, flags); +} + +static m_addr_t __vtobus(m_bush_t bush, void *m) +{ + u_long flags; + m_pool_s *mp; + int hc = VTOB_HASH_CODE(m); + m_vtob_s *vp = NULL; + m_addr_t a = ((m_addr_t) m) & ~MEMO_CLUSTER_MASK; + + spin_lock_irqsave(&ncr53c8xx_lock, flags); + mp = ___get_dma_pool(bush); + if (mp) { + vp = mp->vtob[hc]; + while (vp && (m_addr_t) vp->vaddr != a) + vp = vp->next; + } + spin_unlock_irqrestore(&ncr53c8xx_lock, flags); + return vp ? vp->baddr + (((m_addr_t) m) - a) : 0; +} + +#define _m_calloc_dma(np, s, n) __m_calloc_dma(np->dev, s, n) +#define _m_free_dma(np, p, s, n) __m_free_dma(np->dev, p, s, n) +#define m_calloc_dma(s, n) _m_calloc_dma(np, s, n) +#define m_free_dma(p, s, n) _m_free_dma(np, p, s, n) +#define _vtobus(np, p) __vtobus(np->dev, p) +#define vtobus(p) _vtobus(np, p) + +/* + * Deal with DMA mapping/unmapping. + */ + +/* To keep track of the dma mapping (sg/single) that has been set */ +#define __data_mapped SCp.phase +#define __data_mapping SCp.have_data_in + +static void __unmap_scsi_data(struct device *dev, struct scsi_cmnd *cmd) +{ + switch(cmd->__data_mapped) { + case 2: + scsi_dma_unmap(cmd); + break; + } + cmd->__data_mapped = 0; +} + +static int __map_scsi_sg_data(struct device *dev, struct scsi_cmnd *cmd) +{ + int use_sg; + + use_sg = scsi_dma_map(cmd); + if (!use_sg) + return 0; + + cmd->__data_mapped = 2; + cmd->__data_mapping = use_sg; + + return use_sg; +} + +#define unmap_scsi_data(np, cmd) __unmap_scsi_data(np->dev, cmd) +#define map_scsi_sg_data(np, cmd) __map_scsi_sg_data(np->dev, cmd) + +/*========================================================== +** +** Driver setup. +** +** This structure is initialized from linux config +** options. It can be overridden at boot-up by the boot +** command line. +** +**========================================================== +*/ +static struct ncr_driver_setup + driver_setup = SCSI_NCR_DRIVER_SETUP; + +#ifndef MODULE +#ifdef SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT +static struct ncr_driver_setup + driver_safe_setup __initdata = SCSI_NCR_DRIVER_SAFE_SETUP; +#endif +#endif /* !MODULE */ + +#define initverbose (driver_setup.verbose) +#define bootverbose (np->verbose) + + +/*=================================================================== +** +** Driver setup from the boot command line +** +**=================================================================== +*/ + +#ifdef MODULE +#define ARG_SEP ' ' +#else +#define ARG_SEP ',' +#endif + +#define OPT_TAGS 1 +#define OPT_MASTER_PARITY 2 +#define OPT_SCSI_PARITY 3 +#define OPT_DISCONNECTION 4 +#define OPT_SPECIAL_FEATURES 5 +#define OPT_UNUSED_1 6 +#define OPT_FORCE_SYNC_NEGO 7 +#define OPT_REVERSE_PROBE 8 +#define OPT_DEFAULT_SYNC 9 +#define OPT_VERBOSE 10 +#define OPT_DEBUG 11 +#define OPT_BURST_MAX 12 +#define OPT_LED_PIN 13 +#define OPT_MAX_WIDE 14 +#define OPT_SETTLE_DELAY 15 +#define OPT_DIFF_SUPPORT 16 +#define OPT_IRQM 17 +#define OPT_PCI_FIX_UP 18 +#define OPT_BUS_CHECK 19 +#define OPT_OPTIMIZE 20 +#define OPT_RECOVERY 21 +#define OPT_SAFE_SETUP 22 +#define OPT_USE_NVRAM 23 +#define OPT_EXCLUDE 24 +#define OPT_HOST_ID 25 + +#ifdef SCSI_NCR_IARB_SUPPORT +#define OPT_IARB 26 +#endif + +#ifdef MODULE +#define ARG_SEP ' ' +#else +#define ARG_SEP ',' +#endif + +#ifndef MODULE +static char setup_token[] __initdata = + "tags:" "mpar:" + "spar:" "disc:" + "specf:" "ultra:" + "fsn:" "revprob:" + "sync:" "verb:" + "debug:" "burst:" + "led:" "wide:" + "settle:" "diff:" + "irqm:" "pcifix:" + "buschk:" "optim:" + "recovery:" + "safe:" "nvram:" + "excl:" "hostid:" +#ifdef SCSI_NCR_IARB_SUPPORT + "iarb:" +#endif + ; /* DONNOT REMOVE THIS ';' */ + +static int __init get_setup_token(char *p) +{ + char *cur = setup_token; + char *pc; + int i = 0; + + while (cur != NULL && (pc = strchr(cur, ':')) != NULL) { + ++pc; + ++i; + if (!strncmp(p, cur, pc - cur)) + return i; + cur = pc; + } + return 0; +} + +static int __init sym53c8xx__setup(char *str) +{ +#ifdef SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT + char *cur = str; + char *pc, *pv; + int i, val, c; + int xi = 0; + + while (cur != NULL && (pc = strchr(cur, ':')) != NULL) { + char *pe; + + val = 0; + pv = pc; + c = *++pv; + + if (c == 'n') + val = 0; + else if (c == 'y') + val = 1; + else + val = (int) simple_strtoul(pv, &pe, 0); + + switch (get_setup_token(cur)) { + case OPT_TAGS: + driver_setup.default_tags = val; + if (pe && *pe == '/') { + i = 0; + while (*pe && *pe != ARG_SEP && + i < sizeof(driver_setup.tag_ctrl)-1) { + driver_setup.tag_ctrl[i++] = *pe++; + } + driver_setup.tag_ctrl[i] = '\0'; + } + break; + case OPT_MASTER_PARITY: + driver_setup.master_parity = val; + break; + case OPT_SCSI_PARITY: + driver_setup.scsi_parity = val; + break; + case OPT_DISCONNECTION: + driver_setup.disconnection = val; + break; + case OPT_SPECIAL_FEATURES: + driver_setup.special_features = val; + break; + case OPT_FORCE_SYNC_NEGO: + driver_setup.force_sync_nego = val; + break; + case OPT_REVERSE_PROBE: + driver_setup.reverse_probe = val; + break; + case OPT_DEFAULT_SYNC: + driver_setup.default_sync = val; + break; + case OPT_VERBOSE: + driver_setup.verbose = val; + break; + case OPT_DEBUG: + driver_setup.debug = val; + break; + case OPT_BURST_MAX: + driver_setup.burst_max = val; + break; + case OPT_LED_PIN: + driver_setup.led_pin = val; + break; + case OPT_MAX_WIDE: + driver_setup.max_wide = val? 1:0; + break; + case OPT_SETTLE_DELAY: + driver_setup.settle_delay = val; + break; + case OPT_DIFF_SUPPORT: + driver_setup.diff_support = val; + break; + case OPT_IRQM: + driver_setup.irqm = val; + break; + case OPT_PCI_FIX_UP: + driver_setup.pci_fix_up = val; + break; + case OPT_BUS_CHECK: + driver_setup.bus_check = val; + break; + case OPT_OPTIMIZE: + driver_setup.optimize = val; + break; + case OPT_RECOVERY: + driver_setup.recovery = val; + break; + case OPT_USE_NVRAM: + driver_setup.use_nvram = val; + break; + case OPT_SAFE_SETUP: + memcpy(&driver_setup, &driver_safe_setup, + sizeof(driver_setup)); + break; + case OPT_EXCLUDE: + if (xi < SCSI_NCR_MAX_EXCLUDES) + driver_setup.excludes[xi++] = val; + break; + case OPT_HOST_ID: + driver_setup.host_id = val; + break; +#ifdef SCSI_NCR_IARB_SUPPORT + case OPT_IARB: + driver_setup.iarb = val; + break; +#endif + default: + printk("sym53c8xx_setup: unexpected boot option '%.*s' ignored\n", (int)(pc-cur+1), cur); + break; + } + + if ((cur = strchr(cur, ARG_SEP)) != NULL) + ++cur; + } +#endif /* SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT */ + return 1; +} +#endif /* !MODULE */ + +/*=================================================================== +** +** Get device queue depth from boot command line. +** +**=================================================================== +*/ +#define DEF_DEPTH (driver_setup.default_tags) +#define ALL_TARGETS -2 +#define NO_TARGET -1 +#define ALL_LUNS -2 +#define NO_LUN -1 + +static int device_queue_depth(int unit, int target, int lun) +{ + int c, h, t, u, v; + char *p = driver_setup.tag_ctrl; + char *ep; + + h = -1; + t = NO_TARGET; + u = NO_LUN; + while ((c = *p++) != 0) { + v = simple_strtoul(p, &ep, 0); + switch(c) { + case '/': + ++h; + t = ALL_TARGETS; + u = ALL_LUNS; + break; + case 't': + if (t != target) + t = (target == v) ? v : NO_TARGET; + u = ALL_LUNS; + break; + case 'u': + if (u != lun) + u = (lun == v) ? v : NO_LUN; + break; + case 'q': + if (h == unit && + (t == ALL_TARGETS || t == target) && + (u == ALL_LUNS || u == lun)) + return v; + break; + case '-': + t = ALL_TARGETS; + u = ALL_LUNS; + break; + default: + break; + } + p = ep; + } + return DEF_DEPTH; +} + + +/*========================================================== +** +** The CCB done queue uses an array of CCB virtual +** addresses. Empty entries are flagged using the bogus +** virtual address 0xffffffff. +** +** Since PCI ensures that only aligned DWORDs are accessed +** atomically, 64 bit little-endian architecture requires +** to test the high order DWORD of the entry to determine +** if it is empty or valid. +** +** BTW, I will make things differently as soon as I will +** have a better idea, but this is simple and should work. +** +**========================================================== +*/ + +#define SCSI_NCR_CCB_DONE_SUPPORT +#ifdef SCSI_NCR_CCB_DONE_SUPPORT + +#define MAX_DONE 24 +#define CCB_DONE_EMPTY 0xffffffffUL + +/* All 32 bit architectures */ +#if BITS_PER_LONG == 32 +#define CCB_DONE_VALID(cp) (((u_long) cp) != CCB_DONE_EMPTY) + +/* All > 32 bit (64 bit) architectures regardless endian-ness */ +#else +#define CCB_DONE_VALID(cp) \ + ((((u_long) cp) & 0xffffffff00000000ul) && \ + (((u_long) cp) & 0xfffffffful) != CCB_DONE_EMPTY) +#endif + +#endif /* SCSI_NCR_CCB_DONE_SUPPORT */ + +/*========================================================== +** +** Configuration and Debugging +** +**========================================================== +*/ + +/* +** SCSI address of this device. +** The boot routines should have set it. +** If not, use this. +*/ + +#ifndef SCSI_NCR_MYADDR +#define SCSI_NCR_MYADDR (7) +#endif + +/* +** The maximum number of tags per logic unit. +** Used only for disk devices that support tags. +*/ + +#ifndef SCSI_NCR_MAX_TAGS +#define SCSI_NCR_MAX_TAGS (8) +#endif + +/* +** TAGS are actually limited to 64 tags/lun. +** We need to deal with power of 2, for alignment constraints. +*/ +#if SCSI_NCR_MAX_TAGS > 64 +#define MAX_TAGS (64) +#else +#define MAX_TAGS SCSI_NCR_MAX_TAGS +#endif + +#define NO_TAG (255) + +/* +** Choose appropriate type for tag bitmap. +*/ +#if MAX_TAGS > 32 +typedef u64 tagmap_t; +#else +typedef u32 tagmap_t; +#endif + +/* +** Number of targets supported by the driver. +** n permits target numbers 0..n-1. +** Default is 16, meaning targets #0..#15. +** #7 .. is myself. +*/ + +#ifdef SCSI_NCR_MAX_TARGET +#define MAX_TARGET (SCSI_NCR_MAX_TARGET) +#else +#define MAX_TARGET (16) +#endif + +/* +** Number of logic units supported by the driver. +** n enables logic unit numbers 0..n-1. +** The common SCSI devices require only +** one lun, so take 1 as the default. +*/ + +#ifdef SCSI_NCR_MAX_LUN +#define MAX_LUN SCSI_NCR_MAX_LUN +#else +#define MAX_LUN (1) +#endif + +/* +** Asynchronous pre-scaler (ns). Shall be 40 +*/ + +#ifndef SCSI_NCR_MIN_ASYNC +#define SCSI_NCR_MIN_ASYNC (40) +#endif + +/* +** The maximum number of jobs scheduled for starting. +** There should be one slot per target, and one slot +** for each tag of each target in use. +** The calculation below is actually quite silly ... +*/ + +#ifdef SCSI_NCR_CAN_QUEUE +#define MAX_START (SCSI_NCR_CAN_QUEUE + 4) +#else +#define MAX_START (MAX_TARGET + 7 * MAX_TAGS) +#endif + +/* +** We limit the max number of pending IO to 250. +** since we donnot want to allocate more than 1 +** PAGE for 'scripth'. +*/ +#if MAX_START > 250 +#undef MAX_START +#define MAX_START 250 +#endif + +/* +** The maximum number of segments a transfer is split into. +** We support up to 127 segments for both read and write. +** The data scripts are broken into 2 sub-scripts. +** 80 (MAX_SCATTERL) segments are moved from a sub-script +** in on-chip RAM. This makes data transfers shorter than +** 80k (assuming 1k fs) as fast as possible. +*/ + +#define MAX_SCATTER (SCSI_NCR_MAX_SCATTER) + +#if (MAX_SCATTER > 80) +#define MAX_SCATTERL 80 +#define MAX_SCATTERH (MAX_SCATTER - MAX_SCATTERL) +#else +#define MAX_SCATTERL (MAX_SCATTER-1) +#define MAX_SCATTERH 1 +#endif + +/* +** other +*/ + +#define NCR_SNOOP_TIMEOUT (1000000) + +/* +** Other definitions +*/ + +#define ScsiResult(host_code, scsi_code) (((host_code) << 16) + ((scsi_code) & 0x7f)) + +#define initverbose (driver_setup.verbose) +#define bootverbose (np->verbose) + +/*========================================================== +** +** Command control block states. +** +**========================================================== +*/ + +#define HS_IDLE (0) +#define HS_BUSY (1) +#define HS_NEGOTIATE (2) /* sync/wide data transfer*/ +#define HS_DISCONNECT (3) /* Disconnected by target */ + +#define HS_DONEMASK (0x80) +#define HS_COMPLETE (4|HS_DONEMASK) +#define HS_SEL_TIMEOUT (5|HS_DONEMASK) /* Selection timeout */ +#define HS_RESET (6|HS_DONEMASK) /* SCSI reset */ +#define HS_ABORTED (7|HS_DONEMASK) /* Transfer aborted */ +#define HS_TIMEOUT (8|HS_DONEMASK) /* Software timeout */ +#define HS_FAIL (9|HS_DONEMASK) /* SCSI or PCI bus errors */ +#define HS_UNEXPECTED (10|HS_DONEMASK)/* Unexpected disconnect */ + +/* +** Invalid host status values used by the SCRIPTS processor +** when the nexus is not fully identified. +** Shall never appear in a CCB. +*/ + +#define HS_INVALMASK (0x40) +#define HS_SELECTING (0|HS_INVALMASK) +#define HS_IN_RESELECT (1|HS_INVALMASK) +#define HS_STARTING (2|HS_INVALMASK) + +/* +** Flags set by the SCRIPT processor for commands +** that have been skipped. +*/ +#define HS_SKIPMASK (0x20) + +/*========================================================== +** +** Software Interrupt Codes +** +**========================================================== +*/ + +#define SIR_BAD_STATUS (1) +#define SIR_XXXXXXXXXX (2) +#define SIR_NEGO_SYNC (3) +#define SIR_NEGO_WIDE (4) +#define SIR_NEGO_FAILED (5) +#define SIR_NEGO_PROTO (6) +#define SIR_REJECT_RECEIVED (7) +#define SIR_REJECT_SENT (8) +#define SIR_IGN_RESIDUE (9) +#define SIR_MISSING_SAVE (10) +#define SIR_RESEL_NO_MSG_IN (11) +#define SIR_RESEL_NO_IDENTIFY (12) +#define SIR_RESEL_BAD_LUN (13) +#define SIR_RESEL_BAD_TARGET (14) +#define SIR_RESEL_BAD_I_T_L (15) +#define SIR_RESEL_BAD_I_T_L_Q (16) +#define SIR_DONE_OVERFLOW (17) +#define SIR_INTFLY (18) +#define SIR_MAX (18) + +/*========================================================== +** +** Extended error codes. +** xerr_status field of struct ccb. +** +**========================================================== +*/ + +#define XE_OK (0) +#define XE_EXTRA_DATA (1) /* unexpected data phase */ +#define XE_BAD_PHASE (2) /* illegal phase (4/5) */ + +/*========================================================== +** +** Negotiation status. +** nego_status field of struct ccb. +** +**========================================================== +*/ + +#define NS_NOCHANGE (0) +#define NS_SYNC (1) +#define NS_WIDE (2) +#define NS_PPR (4) + +/*========================================================== +** +** Misc. +** +**========================================================== +*/ + +#define CCB_MAGIC (0xf2691ad2) + +/*========================================================== +** +** Declaration of structs. +** +**========================================================== +*/ + +static struct scsi_transport_template *ncr53c8xx_transport_template = NULL; + +struct tcb; +struct lcb; +struct ccb; +struct ncb; +struct script; + +struct link { + ncrcmd l_cmd; + ncrcmd l_paddr; +}; + +struct usrcmd { + u_long target; + u_long lun; + u_long data; + u_long cmd; +}; + +#define UC_SETSYNC 10 +#define UC_SETTAGS 11 +#define UC_SETDEBUG 12 +#define UC_SETORDER 13 +#define UC_SETWIDE 14 +#define UC_SETFLAG 15 +#define UC_SETVERBOSE 17 + +#define UF_TRACE (0x01) +#define UF_NODISC (0x02) +#define UF_NOSCAN (0x04) + +/*======================================================================== +** +** Declaration of structs: target control block +** +**======================================================================== +*/ +struct tcb { + /*---------------------------------------------------------------- + ** During reselection the ncr jumps to this point with SFBR + ** set to the encoded target number with bit 7 set. + ** if it's not this target, jump to the next. + ** + ** JUMP IF (SFBR != #target#), @(next tcb) + **---------------------------------------------------------------- + */ + struct link jump_tcb; + + /*---------------------------------------------------------------- + ** Load the actual values for the sxfer and the scntl3 + ** register (sync/wide mode). + ** + ** SCR_COPY (1), @(sval field of this tcb), @(sxfer register) + ** SCR_COPY (1), @(wval field of this tcb), @(scntl3 register) + **---------------------------------------------------------------- + */ + ncrcmd getscr[6]; + + /*---------------------------------------------------------------- + ** Get the IDENTIFY message and load the LUN to SFBR. + ** + ** CALL, <RESEL_LUN> + **---------------------------------------------------------------- + */ + struct link call_lun; + + /*---------------------------------------------------------------- + ** Now look for the right lun. + ** + ** For i = 0 to 3 + ** SCR_JUMP ^ IFTRUE(MASK(i, 3)), @(first lcb mod. i) + ** + ** Recent chips will prefetch the 4 JUMPS using only 1 burst. + ** It is kind of hashcoding. + **---------------------------------------------------------------- + */ + struct link jump_lcb[4]; /* JUMPs for reselection */ + struct lcb * lp[MAX_LUN]; /* The lcb's of this tcb */ + + /*---------------------------------------------------------------- + ** Pointer to the ccb used for negotiation. + ** Prevent from starting a negotiation for all queued commands + ** when tagged command queuing is enabled. + **---------------------------------------------------------------- + */ + struct ccb * nego_cp; + + /*---------------------------------------------------------------- + ** statistical data + **---------------------------------------------------------------- + */ + u_long transfers; + u_long bytes; + + /*---------------------------------------------------------------- + ** negotiation of wide and synch transfer and device quirks. + **---------------------------------------------------------------- + */ +#ifdef SCSI_NCR_BIG_ENDIAN +/*0*/ u16 period; +/*2*/ u_char sval; +/*3*/ u_char minsync; +/*0*/ u_char wval; +/*1*/ u_char widedone; +/*2*/ u_char quirks; +/*3*/ u_char maxoffs; +#else +/*0*/ u_char minsync; +/*1*/ u_char sval; +/*2*/ u16 period; +/*0*/ u_char maxoffs; +/*1*/ u_char quirks; +/*2*/ u_char widedone; +/*3*/ u_char wval; +#endif + + /* User settable limits and options. */ + u_char usrsync; + u_char usrwide; + u_char usrtags; + u_char usrflag; + struct scsi_target *starget; +}; + +/*======================================================================== +** +** Declaration of structs: lun control block +** +**======================================================================== +*/ +struct lcb { + /*---------------------------------------------------------------- + ** During reselection the ncr jumps to this point + ** with SFBR set to the "Identify" message. + ** if it's not this lun, jump to the next. + ** + ** JUMP IF (SFBR != #lun#), @(next lcb of this target) + ** + ** It is this lun. Load TEMP with the nexus jumps table + ** address and jump to RESEL_TAG (or RESEL_NOTAG). + ** + ** SCR_COPY (4), p_jump_ccb, TEMP, + ** SCR_JUMP, <RESEL_TAG> + **---------------------------------------------------------------- + */ + struct link jump_lcb; + ncrcmd load_jump_ccb[3]; + struct link jump_tag; + ncrcmd p_jump_ccb; /* Jump table bus address */ + + /*---------------------------------------------------------------- + ** Jump table used by the script processor to directly jump + ** to the CCB corresponding to the reselected nexus. + ** Address is allocated on 256 bytes boundary in order to + ** allow 8 bit calculation of the tag jump entry for up to + ** 64 possible tags. + **---------------------------------------------------------------- + */ + u32 jump_ccb_0; /* Default table if no tags */ + u32 *jump_ccb; /* Virtual address */ + + /*---------------------------------------------------------------- + ** CCB queue management. + **---------------------------------------------------------------- + */ + struct list_head free_ccbq; /* Queue of available CCBs */ + struct list_head busy_ccbq; /* Queue of busy CCBs */ + struct list_head wait_ccbq; /* Queue of waiting for IO CCBs */ + struct list_head skip_ccbq; /* Queue of skipped CCBs */ + u_char actccbs; /* Number of allocated CCBs */ + u_char busyccbs; /* CCBs busy for this lun */ + u_char queuedccbs; /* CCBs queued to the controller*/ + u_char queuedepth; /* Queue depth for this lun */ + u_char scdev_depth; /* SCSI device queue depth */ + u_char maxnxs; /* Max possible nexuses */ + + /*---------------------------------------------------------------- + ** Control of tagged command queuing. + ** Tags allocation is performed using a circular buffer. + ** This avoids using a loop for tag allocation. + **---------------------------------------------------------------- + */ + u_char ia_tag; /* Allocation index */ + u_char if_tag; /* Freeing index */ + u_char cb_tags[MAX_TAGS]; /* Circular tags buffer */ + u_char usetags; /* Command queuing is active */ + u_char maxtags; /* Max nr of tags asked by user */ + u_char numtags; /* Current number of tags */ + + /*---------------------------------------------------------------- + ** QUEUE FULL control and ORDERED tag control. + **---------------------------------------------------------------- + */ + /*---------------------------------------------------------------- + ** QUEUE FULL and ORDERED tag control. + **---------------------------------------------------------------- + */ + u16 num_good; /* Nr of GOOD since QUEUE FULL */ + tagmap_t tags_umap; /* Used tags bitmap */ + tagmap_t tags_smap; /* Tags in use at 'tag_stime' */ + u_long tags_stime; /* Last time we set smap=umap */ + struct ccb * held_ccb; /* CCB held for QUEUE FULL */ +}; + +/*======================================================================== +** +** Declaration of structs: the launch script. +** +**======================================================================== +** +** It is part of the CCB and is called by the scripts processor to +** start or restart the data structure (nexus). +** This 6 DWORDs mini script makes use of prefetching. +** +**------------------------------------------------------------------------ +*/ +struct launch { + /*---------------------------------------------------------------- + ** SCR_COPY(4), @(p_phys), @(dsa register) + ** SCR_JUMP, @(scheduler_point) + **---------------------------------------------------------------- + */ + ncrcmd setup_dsa[3]; /* Copy 'phys' address to dsa */ + struct link schedule; /* Jump to scheduler point */ + ncrcmd p_phys; /* 'phys' header bus address */ +}; + +/*======================================================================== +** +** Declaration of structs: global HEADER. +** +**======================================================================== +** +** This substructure is copied from the ccb to a global address after +** selection (or reselection) and copied back before disconnect. +** +** These fields are accessible to the script processor. +** +**------------------------------------------------------------------------ +*/ + +struct head { + /*---------------------------------------------------------------- + ** Saved data pointer. + ** Points to the position in the script responsible for the + ** actual transfer transfer of data. + ** It's written after reception of a SAVE_DATA_POINTER message. + ** The goalpointer points after the last transfer command. + **---------------------------------------------------------------- + */ + u32 savep; + u32 lastp; + u32 goalp; + + /*---------------------------------------------------------------- + ** Alternate data pointer. + ** They are copied back to savep/lastp/goalp by the SCRIPTS + ** when the direction is unknown and the device claims data out. + **---------------------------------------------------------------- + */ + u32 wlastp; + u32 wgoalp; + + /*---------------------------------------------------------------- + ** The virtual address of the ccb containing this header. + **---------------------------------------------------------------- + */ + struct ccb * cp; + + /*---------------------------------------------------------------- + ** Status fields. + **---------------------------------------------------------------- + */ + u_char scr_st[4]; /* script status */ + u_char status[4]; /* host status. must be the */ + /* last DWORD of the header. */ +}; + +/* +** The status bytes are used by the host and the script processor. +** +** The byte corresponding to the host_status must be stored in the +** last DWORD of the CCB header since it is used for command +** completion (ncr_wakeup()). Doing so, we are sure that the header +** has been entirely copied back to the CCB when the host_status is +** seen complete by the CPU. +** +** The last four bytes (status[4]) are copied to the scratchb register +** (declared as scr0..scr3 in ncr_reg.h) just after the select/reselect, +** and copied back just after disconnecting. +** Inside the script the XX_REG are used. +** +** The first four bytes (scr_st[4]) are used inside the script by +** "COPY" commands. +** Because source and destination must have the same alignment +** in a DWORD, the fields HAVE to be at the chosen offsets. +** xerr_st 0 (0x34) scratcha +** sync_st 1 (0x05) sxfer +** wide_st 3 (0x03) scntl3 +*/ + +/* +** Last four bytes (script) +*/ +#define QU_REG scr0 +#define HS_REG scr1 +#define HS_PRT nc_scr1 +#define SS_REG scr2 +#define SS_PRT nc_scr2 +#define PS_REG scr3 + +/* +** Last four bytes (host) +*/ +#ifdef SCSI_NCR_BIG_ENDIAN +#define actualquirks phys.header.status[3] +#define host_status phys.header.status[2] +#define scsi_status phys.header.status[1] +#define parity_status phys.header.status[0] +#else +#define actualquirks phys.header.status[0] +#define host_status phys.header.status[1] +#define scsi_status phys.header.status[2] +#define parity_status phys.header.status[3] +#endif + +/* +** First four bytes (script) +*/ +#define xerr_st header.scr_st[0] +#define sync_st header.scr_st[1] +#define nego_st header.scr_st[2] +#define wide_st header.scr_st[3] + +/* +** First four bytes (host) +*/ +#define xerr_status phys.xerr_st +#define nego_status phys.nego_st + +#if 0 +#define sync_status phys.sync_st +#define wide_status phys.wide_st +#endif + +/*========================================================== +** +** Declaration of structs: Data structure block +** +**========================================================== +** +** During execution of a ccb by the script processor, +** the DSA (data structure address) register points +** to this substructure of the ccb. +** This substructure contains the header with +** the script-processor-changeable data and +** data blocks for the indirect move commands. +** +**---------------------------------------------------------- +*/ + +struct dsb { + + /* + ** Header. + */ + + struct head header; + + /* + ** Table data for Script + */ + + struct scr_tblsel select; + struct scr_tblmove smsg ; + struct scr_tblmove cmd ; + struct scr_tblmove sense ; + struct scr_tblmove data[MAX_SCATTER]; +}; + + +/*======================================================================== +** +** Declaration of structs: Command control block. +** +**======================================================================== +*/ +struct ccb { + /*---------------------------------------------------------------- + ** This is the data structure which is pointed by the DSA + ** register when it is executed by the script processor. + ** It must be the first entry because it contains the header + ** as first entry that must be cache line aligned. + **---------------------------------------------------------------- + */ + struct dsb phys; + + /*---------------------------------------------------------------- + ** Mini-script used at CCB execution start-up. + ** Load the DSA with the data structure address (phys) and + ** jump to SELECT. Jump to CANCEL if CCB is to be canceled. + **---------------------------------------------------------------- + */ + struct launch start; + + /*---------------------------------------------------------------- + ** Mini-script used at CCB relection to restart the nexus. + ** Load the DSA with the data structure address (phys) and + ** jump to RESEL_DSA. Jump to ABORT if CCB is to be aborted. + **---------------------------------------------------------------- + */ + struct launch restart; + + /*---------------------------------------------------------------- + ** If a data transfer phase is terminated too early + ** (after reception of a message (i.e. DISCONNECT)), + ** we have to prepare a mini script to transfer + ** the rest of the data. + **---------------------------------------------------------------- + */ + ncrcmd patch[8]; + + /*---------------------------------------------------------------- + ** The general SCSI driver provides a + ** pointer to a control block. + **---------------------------------------------------------------- + */ + struct scsi_cmnd *cmd; /* SCSI command */ + u_char cdb_buf[16]; /* Copy of CDB */ + u_char sense_buf[64]; + int data_len; /* Total data length */ + + /*---------------------------------------------------------------- + ** Message areas. + ** We prepare a message to be sent after selection. + ** We may use a second one if the command is rescheduled + ** due to GETCC or QFULL. + ** Contents are IDENTIFY and SIMPLE_TAG. + ** While negotiating sync or wide transfer, + ** a SDTR or WDTR message is appended. + **---------------------------------------------------------------- + */ + u_char scsi_smsg [8]; + u_char scsi_smsg2[8]; + + /*---------------------------------------------------------------- + ** Other fields. + **---------------------------------------------------------------- + */ + u_long p_ccb; /* BUS address of this CCB */ + u_char sensecmd[6]; /* Sense command */ + u_char tag; /* Tag for this transfer */ + /* 255 means no tag */ + u_char target; + u_char lun; + u_char queued; + u_char auto_sense; + struct ccb * link_ccb; /* Host adapter CCB chain */ + struct list_head link_ccbq; /* Link to unit CCB queue */ + u32 startp; /* Initial data pointer */ + u_long magic; /* Free / busy CCB flag */ +}; + +#define CCB_PHYS(cp,lbl) (cp->p_ccb + offsetof(struct ccb, lbl)) + + +/*======================================================================== +** +** Declaration of structs: NCR device descriptor +** +**======================================================================== +*/ +struct ncb { + /*---------------------------------------------------------------- + ** The global header. + ** It is accessible to both the host and the script processor. + ** Must be cache line size aligned (32 for x86) in order to + ** allow cache line bursting when it is copied to/from CCB. + **---------------------------------------------------------------- + */ + struct head header; + + /*---------------------------------------------------------------- + ** CCBs management queues. + **---------------------------------------------------------------- + */ + struct scsi_cmnd *waiting_list; /* Commands waiting for a CCB */ + /* when lcb is not allocated. */ + struct scsi_cmnd *done_list; /* Commands waiting for done() */ + /* callback to be invoked. */ + spinlock_t smp_lock; /* Lock for SMP threading */ + + /*---------------------------------------------------------------- + ** Chip and controller identification. + **---------------------------------------------------------------- + */ + int unit; /* Unit number */ + char inst_name[16]; /* ncb instance name */ + + /*---------------------------------------------------------------- + ** Initial value of some IO register bits. + ** These values are assumed to have been set by BIOS, and may + ** be used for probing adapter implementation differences. + **---------------------------------------------------------------- + */ + u_char sv_scntl0, sv_scntl3, sv_dmode, sv_dcntl, sv_ctest0, sv_ctest3, + sv_ctest4, sv_ctest5, sv_gpcntl, sv_stest2, sv_stest4; + + /*---------------------------------------------------------------- + ** Actual initial value of IO register bits used by the + ** driver. They are loaded at initialisation according to + ** features that are to be enabled. + **---------------------------------------------------------------- + */ + u_char rv_scntl0, rv_scntl3, rv_dmode, rv_dcntl, rv_ctest0, rv_ctest3, + rv_ctest4, rv_ctest5, rv_stest2; + + /*---------------------------------------------------------------- + ** Targets management. + ** During reselection the ncr jumps to jump_tcb. + ** The SFBR register is loaded with the encoded target id. + ** For i = 0 to 3 + ** SCR_JUMP ^ IFTRUE(MASK(i, 3)), @(next tcb mod. i) + ** + ** Recent chips will prefetch the 4 JUMPS using only 1 burst. + ** It is kind of hashcoding. + **---------------------------------------------------------------- + */ + struct link jump_tcb[4]; /* JUMPs for reselection */ + struct tcb target[MAX_TARGET]; /* Target data */ + + /*---------------------------------------------------------------- + ** Virtual and physical bus addresses of the chip. + **---------------------------------------------------------------- + */ + void __iomem *vaddr; /* Virtual and bus address of */ + unsigned long paddr; /* chip's IO registers. */ + unsigned long paddr2; /* On-chip RAM bus address. */ + volatile /* Pointer to volatile for */ + struct ncr_reg __iomem *reg; /* memory mapped IO. */ + + /*---------------------------------------------------------------- + ** SCRIPTS virtual and physical bus addresses. + ** 'script' is loaded in the on-chip RAM if present. + ** 'scripth' stays in main memory. + **---------------------------------------------------------------- + */ + struct script *script0; /* Copies of script and scripth */ + struct scripth *scripth0; /* relocated for this ncb. */ + struct scripth *scripth; /* Actual scripth virt. address */ + u_long p_script; /* Actual script and scripth */ + u_long p_scripth; /* bus addresses. */ + + /*---------------------------------------------------------------- + ** General controller parameters and configuration. + **---------------------------------------------------------------- + */ + struct device *dev; + u_char revision_id; /* PCI device revision id */ + u32 irq; /* IRQ level */ + u32 features; /* Chip features map */ + u_char myaddr; /* SCSI id of the adapter */ + u_char maxburst; /* log base 2 of dwords burst */ + u_char maxwide; /* Maximum transfer width */ + u_char minsync; /* Minimum sync period factor */ + u_char maxsync; /* Maximum sync period factor */ + u_char maxoffs; /* Max scsi offset */ + u_char multiplier; /* Clock multiplier (1,2,4) */ + u_char clock_divn; /* Number of clock divisors */ + u_long clock_khz; /* SCSI clock frequency in KHz */ + + /*---------------------------------------------------------------- + ** Start queue management. + ** It is filled up by the host processor and accessed by the + ** SCRIPTS processor in order to start SCSI commands. + **---------------------------------------------------------------- + */ + u16 squeueput; /* Next free slot of the queue */ + u16 actccbs; /* Number of allocated CCBs */ + u16 queuedccbs; /* Number of CCBs in start queue*/ + u16 queuedepth; /* Start queue depth */ + + /*---------------------------------------------------------------- + ** Timeout handler. + **---------------------------------------------------------------- + */ + struct timer_list timer; /* Timer handler link header */ + u_long lasttime; + u_long settle_time; /* Resetting the SCSI BUS */ + + /*---------------------------------------------------------------- + ** Debugging and profiling. + **---------------------------------------------------------------- + */ + struct ncr_reg regdump; /* Register dump */ + u_long regtime; /* Time it has been done */ + + /*---------------------------------------------------------------- + ** Miscellaneous buffers accessed by the scripts-processor. + ** They shall be DWORD aligned, because they may be read or + ** written with a SCR_COPY script command. + **---------------------------------------------------------------- + */ + u_char msgout[8]; /* Buffer for MESSAGE OUT */ + u_char msgin [8]; /* Buffer for MESSAGE IN */ + u32 lastmsg; /* Last SCSI message sent */ + u_char scratch; /* Scratch for SCSI receive */ + + /*---------------------------------------------------------------- + ** Miscellaneous configuration and status parameters. + **---------------------------------------------------------------- + */ + u_char disc; /* Diconnection allowed */ + u_char scsi_mode; /* Current SCSI BUS mode */ + u_char order; /* Tag order to use */ + u_char verbose; /* Verbosity for this controller*/ + int ncr_cache; /* Used for cache test at init. */ + u_long p_ncb; /* BUS address of this NCB */ + + /*---------------------------------------------------------------- + ** Command completion handling. + **---------------------------------------------------------------- + */ +#ifdef SCSI_NCR_CCB_DONE_SUPPORT + struct ccb *(ccb_done[MAX_DONE]); + int ccb_done_ic; +#endif + /*---------------------------------------------------------------- + ** Fields that should be removed or changed. + **---------------------------------------------------------------- + */ + struct ccb *ccb; /* Global CCB */ + struct usrcmd user; /* Command from user */ + volatile u_char release_stage; /* Synchronisation stage on release */ +}; + +#define NCB_SCRIPT_PHYS(np,lbl) (np->p_script + offsetof (struct script, lbl)) +#define NCB_SCRIPTH_PHYS(np,lbl) (np->p_scripth + offsetof (struct scripth,lbl)) + +/*========================================================== +** +** +** Script for NCR-Processor. +** +** Use ncr_script_fill() to create the variable parts. +** Use ncr_script_copy_and_bind() to make a copy and +** bind to physical addresses. +** +** +**========================================================== +** +** We have to know the offsets of all labels before +** we reach them (for forward jumps). +** Therefore we declare a struct here. +** If you make changes inside the script, +** DONT FORGET TO CHANGE THE LENGTHS HERE! +** +**---------------------------------------------------------- +*/ + +/* +** For HP Zalon/53c720 systems, the Zalon interface +** between CPU and 53c720 does prefetches, which causes +** problems with self modifying scripts. The problem +** is overcome by calling a dummy subroutine after each +** modification, to force a refetch of the script on +** return from the subroutine. +*/ + +#ifdef CONFIG_NCR53C8XX_PREFETCH +#define PREFETCH_FLUSH_CNT 2 +#define PREFETCH_FLUSH SCR_CALL, PADDRH (wait_dma), +#else +#define PREFETCH_FLUSH_CNT 0 +#define PREFETCH_FLUSH +#endif + +/* +** Script fragments which are loaded into the on-chip RAM +** of 825A, 875 and 895 chips. +*/ +struct script { + ncrcmd start [ 5]; + ncrcmd startpos [ 1]; + ncrcmd select [ 6]; + ncrcmd select2 [ 9 + PREFETCH_FLUSH_CNT]; + ncrcmd loadpos [ 4]; + ncrcmd send_ident [ 9]; + ncrcmd prepare [ 6]; + ncrcmd prepare2 [ 7]; + ncrcmd command [ 6]; + ncrcmd dispatch [ 32]; + ncrcmd clrack [ 4]; + ncrcmd no_data [ 17]; + ncrcmd status [ 8]; + ncrcmd msg_in [ 2]; + ncrcmd msg_in2 [ 16]; + ncrcmd msg_bad [ 4]; + ncrcmd setmsg [ 7]; + ncrcmd cleanup [ 6]; + ncrcmd complete [ 9]; + ncrcmd cleanup_ok [ 8 + PREFETCH_FLUSH_CNT]; + ncrcmd cleanup0 [ 1]; +#ifndef SCSI_NCR_CCB_DONE_SUPPORT + ncrcmd signal [ 12]; +#else + ncrcmd signal [ 9]; + ncrcmd done_pos [ 1]; + ncrcmd done_plug [ 2]; + ncrcmd done_end [ 7]; +#endif + ncrcmd save_dp [ 7]; + ncrcmd restore_dp [ 5]; + ncrcmd disconnect [ 10]; + ncrcmd msg_out [ 9]; + ncrcmd msg_out_done [ 7]; + ncrcmd idle [ 2]; + ncrcmd reselect [ 8]; + ncrcmd reselected [ 8]; + ncrcmd resel_dsa [ 6 + PREFETCH_FLUSH_CNT]; + ncrcmd loadpos1 [ 4]; + ncrcmd resel_lun [ 6]; + ncrcmd resel_tag [ 6]; + ncrcmd jump_to_nexus [ 4 + PREFETCH_FLUSH_CNT]; + ncrcmd nexus_indirect [ 4]; + ncrcmd resel_notag [ 4]; + ncrcmd data_in [MAX_SCATTERL * 4]; + ncrcmd data_in2 [ 4]; + ncrcmd data_out [MAX_SCATTERL * 4]; + ncrcmd data_out2 [ 4]; +}; + +/* +** Script fragments which stay in main memory for all chips. +*/ +struct scripth { + ncrcmd tryloop [MAX_START*2]; + ncrcmd tryloop2 [ 2]; +#ifdef SCSI_NCR_CCB_DONE_SUPPORT + ncrcmd done_queue [MAX_DONE*5]; + ncrcmd done_queue2 [ 2]; +#endif + ncrcmd select_no_atn [ 8]; + ncrcmd cancel [ 4]; + ncrcmd skip [ 9 + PREFETCH_FLUSH_CNT]; + ncrcmd skip2 [ 19]; + ncrcmd par_err_data_in [ 6]; + ncrcmd par_err_other [ 4]; + ncrcmd msg_reject [ 8]; + ncrcmd msg_ign_residue [ 24]; + ncrcmd msg_extended [ 10]; + ncrcmd msg_ext_2 [ 10]; + ncrcmd msg_wdtr [ 14]; + ncrcmd send_wdtr [ 7]; + ncrcmd msg_ext_3 [ 10]; + ncrcmd msg_sdtr [ 14]; + ncrcmd send_sdtr [ 7]; + ncrcmd nego_bad_phase [ 4]; + ncrcmd msg_out_abort [ 10]; + ncrcmd hdata_in [MAX_SCATTERH * 4]; + ncrcmd hdata_in2 [ 2]; + ncrcmd hdata_out [MAX_SCATTERH * 4]; + ncrcmd hdata_out2 [ 2]; + ncrcmd reset [ 4]; + ncrcmd aborttag [ 4]; + ncrcmd abort [ 2]; + ncrcmd abort_resel [ 20]; + ncrcmd resend_ident [ 4]; + ncrcmd clratn_go_on [ 3]; + ncrcmd nxtdsp_go_on [ 1]; + ncrcmd sdata_in [ 8]; + ncrcmd data_io [ 18]; + ncrcmd bad_identify [ 12]; + ncrcmd bad_i_t_l [ 4]; + ncrcmd bad_i_t_l_q [ 4]; + ncrcmd bad_target [ 8]; + ncrcmd bad_status [ 8]; + ncrcmd start_ram [ 4 + PREFETCH_FLUSH_CNT]; + ncrcmd start_ram0 [ 4]; + ncrcmd sto_restart [ 5]; + ncrcmd wait_dma [ 2]; + ncrcmd snooptest [ 9]; + ncrcmd snoopend [ 2]; +}; + +/*========================================================== +** +** +** Function headers. +** +** +**========================================================== +*/ + +static void ncr_alloc_ccb (struct ncb *np, u_char tn, u_char ln); +static void ncr_complete (struct ncb *np, struct ccb *cp); +static void ncr_exception (struct ncb *np); +static void ncr_free_ccb (struct ncb *np, struct ccb *cp); +static void ncr_init_ccb (struct ncb *np, struct ccb *cp); +static void ncr_init_tcb (struct ncb *np, u_char tn); +static struct lcb * ncr_alloc_lcb (struct ncb *np, u_char tn, u_char ln); +static struct lcb * ncr_setup_lcb (struct ncb *np, struct scsi_device *sdev); +static void ncr_getclock (struct ncb *np, int mult); +static void ncr_selectclock (struct ncb *np, u_char scntl3); +static struct ccb *ncr_get_ccb (struct ncb *np, struct scsi_cmnd *cmd); +static void ncr_chip_reset (struct ncb *np, int delay); +static void ncr_init (struct ncb *np, int reset, char * msg, u_long code); +static int ncr_int_sbmc (struct ncb *np); +static int ncr_int_par (struct ncb *np); +static void ncr_int_ma (struct ncb *np); +static void ncr_int_sir (struct ncb *np); +static void ncr_int_sto (struct ncb *np); +static void ncr_negotiate (struct ncb* np, struct tcb* tp); +static int ncr_prepare_nego(struct ncb *np, struct ccb *cp, u_char *msgptr); + +static void ncr_script_copy_and_bind + (struct ncb *np, ncrcmd *src, ncrcmd *dst, int len); +static void ncr_script_fill (struct script * scr, struct scripth * scripth); +static int ncr_scatter (struct ncb *np, struct ccb *cp, struct scsi_cmnd *cmd); +static void ncr_getsync (struct ncb *np, u_char sfac, u_char *fakp, u_char *scntl3p); +static void ncr_setsync (struct ncb *np, struct ccb *cp, u_char scntl3, u_char sxfer); +static void ncr_setup_tags (struct ncb *np, struct scsi_device *sdev); +static void ncr_setwide (struct ncb *np, struct ccb *cp, u_char wide, u_char ack); +static int ncr_snooptest (struct ncb *np); +static void ncr_timeout (struct ncb *np); +static void ncr_wakeup (struct ncb *np, u_long code); +static void ncr_wakeup_done (struct ncb *np); +static void ncr_start_next_ccb (struct ncb *np, struct lcb * lp, int maxn); +static void ncr_put_start_queue(struct ncb *np, struct ccb *cp); + +static void insert_into_waiting_list(struct ncb *np, struct scsi_cmnd *cmd); +static struct scsi_cmnd *retrieve_from_waiting_list(int to_remove, struct ncb *np, struct scsi_cmnd *cmd); +static void process_waiting_list(struct ncb *np, int sts); + +#define remove_from_waiting_list(np, cmd) \ + retrieve_from_waiting_list(1, (np), (cmd)) +#define requeue_waiting_list(np) process_waiting_list((np), DID_OK) +#define reset_waiting_list(np) process_waiting_list((np), DID_RESET) + +static inline char *ncr_name (struct ncb *np) +{ + return np->inst_name; +} + + +/*========================================================== +** +** +** Scripts for NCR-Processor. +** +** Use ncr_script_bind for binding to physical addresses. +** +** +**========================================================== +** +** NADDR generates a reference to a field of the controller data. +** PADDR generates a reference to another part of the script. +** RADDR generates a reference to a script processor register. +** FADDR generates a reference to a script processor register +** with offset. +** +**---------------------------------------------------------- +*/ + +#define RELOC_SOFTC 0x40000000 +#define RELOC_LABEL 0x50000000 +#define RELOC_REGISTER 0x60000000 +#if 0 +#define RELOC_KVAR 0x70000000 +#endif +#define RELOC_LABELH 0x80000000 +#define RELOC_MASK 0xf0000000 + +#define NADDR(label) (RELOC_SOFTC | offsetof(struct ncb, label)) +#define PADDR(label) (RELOC_LABEL | offsetof(struct script, label)) +#define PADDRH(label) (RELOC_LABELH | offsetof(struct scripth, label)) +#define RADDR(label) (RELOC_REGISTER | REG(label)) +#define FADDR(label,ofs)(RELOC_REGISTER | ((REG(label))+(ofs))) +#if 0 +#define KVAR(which) (RELOC_KVAR | (which)) +#endif + +#if 0 +#define SCRIPT_KVAR_JIFFIES (0) +#define SCRIPT_KVAR_FIRST SCRIPT_KVAR_JIFFIES +#define SCRIPT_KVAR_LAST SCRIPT_KVAR_JIFFIES +/* + * Kernel variables referenced in the scripts. + * THESE MUST ALL BE ALIGNED TO A 4-BYTE BOUNDARY. + */ +static void *script_kvars[] __initdata = + { (void *)&jiffies }; +#endif + +static struct script script0 __initdata = { +/*--------------------------< START >-----------------------*/ { + /* + ** This NOP will be patched with LED ON + ** SCR_REG_REG (gpreg, SCR_AND, 0xfe) + */ + SCR_NO_OP, + 0, + /* + ** Clear SIGP. + */ + SCR_FROM_REG (ctest2), + 0, + /* + ** Then jump to a certain point in tryloop. + ** Due to the lack of indirect addressing the code + ** is self modifying here. + */ + SCR_JUMP, +}/*-------------------------< STARTPOS >--------------------*/,{ + PADDRH(tryloop), + +}/*-------------------------< SELECT >----------------------*/,{ + /* + ** DSA contains the address of a scheduled + ** data structure. + ** + ** SCRATCHA contains the address of the script, + ** which starts the next entry. + ** + ** Set Initiator mode. + ** + ** (Target mode is left as an exercise for the reader) + */ + + SCR_CLR (SCR_TRG), + 0, + SCR_LOAD_REG (HS_REG, HS_SELECTING), + 0, + + /* + ** And try to select this target. + */ + SCR_SEL_TBL_ATN ^ offsetof (struct dsb, select), + PADDR (reselect), + +}/*-------------------------< SELECT2 >----------------------*/,{ + /* + ** Now there are 4 possibilities: + ** + ** (1) The ncr loses arbitration. + ** This is ok, because it will try again, + ** when the bus becomes idle. + ** (But beware of the timeout function!) + ** + ** (2) The ncr is reselected. + ** Then the script processor takes the jump + ** to the RESELECT label. + ** + ** (3) The ncr wins arbitration. + ** Then it will execute SCRIPTS instruction until + ** the next instruction that checks SCSI phase. + ** Then will stop and wait for selection to be + ** complete or selection time-out to occur. + ** As a result the SCRIPTS instructions until + ** LOADPOS + 2 should be executed in parallel with + ** the SCSI core performing selection. + */ + + /* + ** The MESSAGE_REJECT problem seems to be due to a selection + ** timing problem. + ** Wait immediately for the selection to complete. + ** (2.5x behaves so) + */ + SCR_JUMPR ^ IFFALSE (WHEN (SCR_MSG_OUT)), + 0, + + /* + ** Next time use the next slot. + */ + SCR_COPY (4), + RADDR (temp), + PADDR (startpos), + /* + ** The ncr doesn't have an indirect load + ** or store command. So we have to + ** copy part of the control block to a + ** fixed place, where we can access it. + ** + ** We patch the address part of a + ** COPY command with the DSA-register. + */ + SCR_COPY_F (4), + RADDR (dsa), + PADDR (loadpos), + /* + ** Flush script prefetch if required + */ + PREFETCH_FLUSH + /* + ** then we do the actual copy. + */ + SCR_COPY (sizeof (struct head)), + /* + ** continued after the next label ... + */ +}/*-------------------------< LOADPOS >---------------------*/,{ + 0, + NADDR (header), + /* + ** Wait for the next phase or the selection + ** to complete or time-out. + */ + SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_OUT)), + PADDR (prepare), + +}/*-------------------------< SEND_IDENT >----------------------*/,{ + /* + ** Selection complete. + ** Send the IDENTIFY and SIMPLE_TAG messages + ** (and the EXTENDED_SDTR message) + */ + SCR_MOVE_TBL ^ SCR_MSG_OUT, + offsetof (struct dsb, smsg), + SCR_JUMP ^ IFTRUE (WHEN (SCR_MSG_OUT)), + PADDRH (resend_ident), + SCR_LOAD_REG (scratcha, 0x80), + 0, + SCR_COPY (1), + RADDR (scratcha), + NADDR (lastmsg), +}/*-------------------------< PREPARE >----------------------*/,{ + /* + ** load the savep (saved pointer) into + ** the TEMP register (actual pointer) + */ + SCR_COPY (4), + NADDR (header.savep), + RADDR (temp), + /* + ** Initialize the status registers + */ + SCR_COPY (4), + NADDR (header.status), + RADDR (scr0), +}/*-------------------------< PREPARE2 >---------------------*/,{ + /* + ** Initialize the msgout buffer with a NOOP message. + */ + SCR_LOAD_REG (scratcha, NOP), + 0, + SCR_COPY (1), + RADDR (scratcha), + NADDR (msgout), +#if 0 + SCR_COPY (1), + RADDR (scratcha), + NADDR (msgin), +#endif + /* + ** Anticipate the COMMAND phase. + ** This is the normal case for initial selection. + */ + SCR_JUMP ^ IFFALSE (WHEN (SCR_COMMAND)), + PADDR (dispatch), + +}/*-------------------------< COMMAND >--------------------*/,{ + /* + ** ... and send the command + */ + SCR_MOVE_TBL ^ SCR_COMMAND, + offsetof (struct dsb, cmd), + /* + ** If status is still HS_NEGOTIATE, negotiation failed. + ** We check this here, since we want to do that + ** only once. + */ + SCR_FROM_REG (HS_REG), + 0, + SCR_INT ^ IFTRUE (DATA (HS_NEGOTIATE)), + SIR_NEGO_FAILED, + +}/*-----------------------< DISPATCH >----------------------*/,{ + /* + ** MSG_IN is the only phase that shall be + ** entered at least once for each (re)selection. + ** So we test it first. + */ + SCR_JUMP ^ IFTRUE (WHEN (SCR_MSG_IN)), + PADDR (msg_in), + + SCR_RETURN ^ IFTRUE (IF (SCR_DATA_OUT)), + 0, + /* + ** DEL 397 - 53C875 Rev 3 - Part Number 609-0392410 - ITEM 4. + ** Possible data corruption during Memory Write and Invalidate. + ** This work-around resets the addressing logic prior to the + ** start of the first MOVE of a DATA IN phase. + ** (See Documentation/scsi/ncr53c8xx.txt for more information) + */ + SCR_JUMPR ^ IFFALSE (IF (SCR_DATA_IN)), + 20, + SCR_COPY (4), + RADDR (scratcha), + RADDR (scratcha), + SCR_RETURN, + 0, + SCR_JUMP ^ IFTRUE (IF (SCR_STATUS)), + PADDR (status), + SCR_JUMP ^ IFTRUE (IF (SCR_COMMAND)), + PADDR (command), + SCR_JUMP ^ IFTRUE (IF (SCR_MSG_OUT)), + PADDR (msg_out), + /* + ** Discard one illegal phase byte, if required. + */ + SCR_LOAD_REG (scratcha, XE_BAD_PHASE), + 0, + SCR_COPY (1), + RADDR (scratcha), + NADDR (xerr_st), + SCR_JUMPR ^ IFFALSE (IF (SCR_ILG_OUT)), + 8, + SCR_MOVE_ABS (1) ^ SCR_ILG_OUT, + NADDR (scratch), + SCR_JUMPR ^ IFFALSE (IF (SCR_ILG_IN)), + 8, + SCR_MOVE_ABS (1) ^ SCR_ILG_IN, + NADDR (scratch), + SCR_JUMP, + PADDR (dispatch), + +}/*-------------------------< CLRACK >----------------------*/,{ + /* + ** Terminate possible pending message phase. + */ + SCR_CLR (SCR_ACK), + 0, + SCR_JUMP, + PADDR (dispatch), + +}/*-------------------------< NO_DATA >--------------------*/,{ + /* + ** The target wants to tranfer too much data + ** or in the wrong direction. + ** Remember that in extended error. + */ + SCR_LOAD_REG (scratcha, XE_EXTRA_DATA), + 0, + SCR_COPY (1), + RADDR (scratcha), + NADDR (xerr_st), + /* + ** Discard one data byte, if required. + */ + SCR_JUMPR ^ IFFALSE (WHEN (SCR_DATA_OUT)), + 8, + SCR_MOVE_ABS (1) ^ SCR_DATA_OUT, + NADDR (scratch), + SCR_JUMPR ^ IFFALSE (IF (SCR_DATA_IN)), + 8, + SCR_MOVE_ABS (1) ^ SCR_DATA_IN, + NADDR (scratch), + /* + ** .. and repeat as required. + */ + SCR_CALL, + PADDR (dispatch), + SCR_JUMP, + PADDR (no_data), + +}/*-------------------------< STATUS >--------------------*/,{ + /* + ** get the status + */ + SCR_MOVE_ABS (1) ^ SCR_STATUS, + NADDR (scratch), + /* + ** save status to scsi_status. + ** mark as complete. + */ + SCR_TO_REG (SS_REG), + 0, + SCR_LOAD_REG (HS_REG, HS_COMPLETE), + 0, + SCR_JUMP, + PADDR (dispatch), +}/*-------------------------< MSG_IN >--------------------*/,{ + /* + ** Get the first byte of the message + ** and save it to SCRATCHA. + ** + ** The script processor doesn't negate the + ** ACK signal after this transfer. + */ + SCR_MOVE_ABS (1) ^ SCR_MSG_IN, + NADDR (msgin[0]), +}/*-------------------------< MSG_IN2 >--------------------*/,{ + /* + ** Handle this message. + */ + SCR_JUMP ^ IFTRUE (DATA (COMMAND_COMPLETE)), + PADDR (complete), + SCR_JUMP ^ IFTRUE (DATA (DISCONNECT)), + PADDR (disconnect), + SCR_JUMP ^ IFTRUE (DATA (SAVE_POINTERS)), + PADDR (save_dp), + SCR_JUMP ^ IFTRUE (DATA (RESTORE_POINTERS)), + PADDR (restore_dp), + SCR_JUMP ^ IFTRUE (DATA (EXTENDED_MESSAGE)), + PADDRH (msg_extended), + SCR_JUMP ^ IFTRUE (DATA (NOP)), + PADDR (clrack), + SCR_JUMP ^ IFTRUE (DATA (MESSAGE_REJECT)), + PADDRH (msg_reject), + SCR_JUMP ^ IFTRUE (DATA (IGNORE_WIDE_RESIDUE)), + PADDRH (msg_ign_residue), + /* + ** Rest of the messages left as + ** an exercise ... + ** + ** Unimplemented messages: + ** fall through to MSG_BAD. + */ +}/*-------------------------< MSG_BAD >------------------*/,{ + /* + ** unimplemented message - reject it. + */ + SCR_INT, + SIR_REJECT_SENT, + SCR_LOAD_REG (scratcha, MESSAGE_REJECT), + 0, +}/*-------------------------< SETMSG >----------------------*/,{ + SCR_COPY (1), + RADDR (scratcha), + NADDR (msgout), + SCR_SET (SCR_ATN), + 0, + SCR_JUMP, + PADDR (clrack), +}/*-------------------------< CLEANUP >-------------------*/,{ + /* + ** dsa: Pointer to ccb + ** or xxxxxxFF (no ccb) + ** + ** HS_REG: Host-Status (<>0!) + */ + SCR_FROM_REG (dsa), + 0, + SCR_JUMP ^ IFTRUE (DATA (0xff)), + PADDR (start), + /* + ** dsa is valid. + ** complete the cleanup. + */ + SCR_JUMP, + PADDR (cleanup_ok), + +}/*-------------------------< COMPLETE >-----------------*/,{ + /* + ** Complete message. + ** + ** Copy TEMP register to LASTP in header. + */ + SCR_COPY (4), + RADDR (temp), + NADDR (header.lastp), + /* + ** When we terminate the cycle by clearing ACK, + ** the target may disconnect immediately. + ** + ** We don't want to be told of an + ** "unexpected disconnect", + ** so we disable this feature. + */ + SCR_REG_REG (scntl2, SCR_AND, 0x7f), + 0, + /* + ** Terminate cycle ... + */ + SCR_CLR (SCR_ACK|SCR_ATN), + 0, + /* + ** ... and wait for the disconnect. + */ + SCR_WAIT_DISC, + 0, +}/*-------------------------< CLEANUP_OK >----------------*/,{ + /* + ** Save host status to header. + */ + SCR_COPY (4), + RADDR (scr0), + NADDR (header.status), + /* + ** and copy back the header to the ccb. + */ + SCR_COPY_F (4), + RADDR (dsa), + PADDR (cleanup0), + /* + ** Flush script prefetch if required + */ + PREFETCH_FLUSH + SCR_COPY (sizeof (struct head)), + NADDR (header), +}/*-------------------------< CLEANUP0 >--------------------*/,{ + 0, +}/*-------------------------< SIGNAL >----------------------*/,{ + /* + ** if job not completed ... + */ + SCR_FROM_REG (HS_REG), + 0, + /* + ** ... start the next command. + */ + SCR_JUMP ^ IFTRUE (MASK (0, (HS_DONEMASK|HS_SKIPMASK))), + PADDR(start), + /* + ** If command resulted in not GOOD status, + ** call the C code if needed. + */ + SCR_FROM_REG (SS_REG), + 0, + SCR_CALL ^ IFFALSE (DATA (S_GOOD)), + PADDRH (bad_status), + +#ifndef SCSI_NCR_CCB_DONE_SUPPORT + + /* + ** ... signal completion to the host + */ + SCR_INT, + SIR_INTFLY, + /* + ** Auf zu neuen Schandtaten! + */ + SCR_JUMP, + PADDR(start), + +#else /* defined SCSI_NCR_CCB_DONE_SUPPORT */ + + /* + ** ... signal completion to the host + */ + SCR_JUMP, +}/*------------------------< DONE_POS >---------------------*/,{ + PADDRH (done_queue), +}/*------------------------< DONE_PLUG >--------------------*/,{ + SCR_INT, + SIR_DONE_OVERFLOW, +}/*------------------------< DONE_END >---------------------*/,{ + SCR_INT, + SIR_INTFLY, + SCR_COPY (4), + RADDR (temp), + PADDR (done_pos), + SCR_JUMP, + PADDR (start), + +#endif /* SCSI_NCR_CCB_DONE_SUPPORT */ + +}/*-------------------------< SAVE_DP >------------------*/,{ + /* + ** SAVE_DP message: + ** Copy TEMP register to SAVEP in header. + */ + SCR_COPY (4), + RADDR (temp), + NADDR (header.savep), + SCR_CLR (SCR_ACK), + 0, + SCR_JUMP, + PADDR (dispatch), +}/*-------------------------< RESTORE_DP >---------------*/,{ + /* + ** RESTORE_DP message: + ** Copy SAVEP in header to TEMP register. + */ + SCR_COPY (4), + NADDR (header.savep), + RADDR (temp), + SCR_JUMP, + PADDR (clrack), + +}/*-------------------------< DISCONNECT >---------------*/,{ + /* + ** DISCONNECTing ... + ** + ** disable the "unexpected disconnect" feature, + ** and remove the ACK signal. + */ + SCR_REG_REG (scntl2, SCR_AND, 0x7f), + 0, + SCR_CLR (SCR_ACK|SCR_ATN), + 0, + /* + ** Wait for the disconnect. + */ + SCR_WAIT_DISC, + 0, + /* + ** Status is: DISCONNECTED. + */ + SCR_LOAD_REG (HS_REG, HS_DISCONNECT), + 0, + SCR_JUMP, + PADDR (cleanup_ok), + +}/*-------------------------< MSG_OUT >-------------------*/,{ + /* + ** The target requests a message. + */ + SCR_MOVE_ABS (1) ^ SCR_MSG_OUT, + NADDR (msgout), + SCR_COPY (1), + NADDR (msgout), + NADDR (lastmsg), + /* + ** If it was no ABORT message ... + */ + SCR_JUMP ^ IFTRUE (DATA (ABORT_TASK_SET)), + PADDRH (msg_out_abort), + /* + ** ... wait for the next phase + ** if it's a message out, send it again, ... + */ + SCR_JUMP ^ IFTRUE (WHEN (SCR_MSG_OUT)), + PADDR (msg_out), +}/*-------------------------< MSG_OUT_DONE >--------------*/,{ + /* + ** ... else clear the message ... + */ + SCR_LOAD_REG (scratcha, NOP), + 0, + SCR_COPY (4), + RADDR (scratcha), + NADDR (msgout), + /* + ** ... and process the next phase + */ + SCR_JUMP, + PADDR (dispatch), +}/*-------------------------< IDLE >------------------------*/,{ + /* + ** Nothing to do? + ** Wait for reselect. + ** This NOP will be patched with LED OFF + ** SCR_REG_REG (gpreg, SCR_OR, 0x01) + */ + SCR_NO_OP, + 0, +}/*-------------------------< RESELECT >--------------------*/,{ + /* + ** make the DSA invalid. + */ + SCR_LOAD_REG (dsa, 0xff), + 0, + SCR_CLR (SCR_TRG), + 0, + SCR_LOAD_REG (HS_REG, HS_IN_RESELECT), + 0, + /* + ** Sleep waiting for a reselection. + ** If SIGP is set, special treatment. + ** + ** Zu allem bereit .. + */ + SCR_WAIT_RESEL, + PADDR(start), +}/*-------------------------< RESELECTED >------------------*/,{ + /* + ** This NOP will be patched with LED ON + ** SCR_REG_REG (gpreg, SCR_AND, 0xfe) + */ + SCR_NO_OP, + 0, + /* + ** ... zu nichts zu gebrauchen ? + ** + ** load the target id into the SFBR + ** and jump to the control block. + ** + ** Look at the declarations of + ** - struct ncb + ** - struct tcb + ** - struct lcb + ** - struct ccb + ** to understand what's going on. + */ + SCR_REG_SFBR (ssid, SCR_AND, 0x8F), + 0, + SCR_TO_REG (sdid), + 0, + SCR_JUMP, + NADDR (jump_tcb), + +}/*-------------------------< RESEL_DSA >-------------------*/,{ + /* + ** Ack the IDENTIFY or TAG previously received. + */ + SCR_CLR (SCR_ACK), + 0, + /* + ** The ncr doesn't have an indirect load + ** or store command. So we have to + ** copy part of the control block to a + ** fixed place, where we can access it. + ** + ** We patch the address part of a + ** COPY command with the DSA-register. + */ + SCR_COPY_F (4), + RADDR (dsa), + PADDR (loadpos1), + /* + ** Flush script prefetch if required + */ + PREFETCH_FLUSH + /* + ** then we do the actual copy. + */ + SCR_COPY (sizeof (struct head)), + /* + ** continued after the next label ... + */ + +}/*-------------------------< LOADPOS1 >-------------------*/,{ + 0, + NADDR (header), + /* + ** The DSA contains the data structure address. + */ + SCR_JUMP, + PADDR (prepare), + +}/*-------------------------< RESEL_LUN >-------------------*/,{ + /* + ** come back to this point + ** to get an IDENTIFY message + ** Wait for a msg_in phase. + */ + SCR_INT ^ IFFALSE (WHEN (SCR_MSG_IN)), + SIR_RESEL_NO_MSG_IN, + /* + ** message phase. + ** Read the data directly from the BUS DATA lines. + ** This helps to support very old SCSI devices that + ** may reselect without sending an IDENTIFY. + */ + SCR_FROM_REG (sbdl), + 0, + /* + ** It should be an Identify message. + */ + SCR_RETURN, + 0, +}/*-------------------------< RESEL_TAG >-------------------*/,{ + /* + ** Read IDENTIFY + SIMPLE + TAG using a single MOVE. + ** Aggressive optimization, is'nt it? + ** No need to test the SIMPLE TAG message, since the + ** driver only supports conformant devices for tags. ;-) + */ + SCR_MOVE_ABS (3) ^ SCR_MSG_IN, + NADDR (msgin), + /* + ** Read the TAG from the SIDL. + ** Still an aggressive optimization. ;-) + ** Compute the CCB indirect jump address which + ** is (#TAG*2 & 0xfc) due to tag numbering using + ** 1,3,5..MAXTAGS*2+1 actual values. + */ + SCR_REG_SFBR (sidl, SCR_SHL, 0), + 0, + SCR_SFBR_REG (temp, SCR_AND, 0xfc), + 0, +}/*-------------------------< JUMP_TO_NEXUS >-------------------*/,{ + SCR_COPY_F (4), + RADDR (temp), + PADDR (nexus_indirect), + /* + ** Flush script prefetch if required + */ + PREFETCH_FLUSH + SCR_COPY (4), +}/*-------------------------< NEXUS_INDIRECT >-------------------*/,{ + 0, + RADDR (temp), + SCR_RETURN, + 0, +}/*-------------------------< RESEL_NOTAG >-------------------*/,{ + /* + ** No tag expected. + ** Read an throw away the IDENTIFY. + */ + SCR_MOVE_ABS (1) ^ SCR_MSG_IN, + NADDR (msgin), + SCR_JUMP, + PADDR (jump_to_nexus), +}/*-------------------------< DATA_IN >--------------------*/,{ +/* +** Because the size depends on the +** #define MAX_SCATTERL parameter, +** it is filled in at runtime. +** +** ##===========< i=0; i<MAX_SCATTERL >========= +** || SCR_CALL ^ IFFALSE (WHEN (SCR_DATA_IN)), +** || PADDR (dispatch), +** || SCR_MOVE_TBL ^ SCR_DATA_IN, +** || offsetof (struct dsb, data[ i]), +** ##========================================== +** +**--------------------------------------------------------- +*/ +0 +}/*-------------------------< DATA_IN2 >-------------------*/,{ + SCR_CALL, + PADDR (dispatch), + SCR_JUMP, + PADDR (no_data), +}/*-------------------------< DATA_OUT >--------------------*/,{ +/* +** Because the size depends on the +** #define MAX_SCATTERL parameter, +** it is filled in at runtime. +** +** ##===========< i=0; i<MAX_SCATTERL >========= +** || SCR_CALL ^ IFFALSE (WHEN (SCR_DATA_OUT)), +** || PADDR (dispatch), +** || SCR_MOVE_TBL ^ SCR_DATA_OUT, +** || offsetof (struct dsb, data[ i]), +** ##========================================== +** +**--------------------------------------------------------- +*/ +0 +}/*-------------------------< DATA_OUT2 >-------------------*/,{ + SCR_CALL, + PADDR (dispatch), + SCR_JUMP, + PADDR (no_data), +}/*--------------------------------------------------------*/ +}; + +static struct scripth scripth0 __initdata = { +/*-------------------------< TRYLOOP >---------------------*/{ +/* +** Start the next entry. +** Called addresses point to the launch script in the CCB. +** They are patched by the main processor. +** +** Because the size depends on the +** #define MAX_START parameter, it is filled +** in at runtime. +** +**----------------------------------------------------------- +** +** ##===========< I=0; i<MAX_START >=========== +** || SCR_CALL, +** || PADDR (idle), +** ##========================================== +** +**----------------------------------------------------------- +*/ +0 +}/*------------------------< TRYLOOP2 >---------------------*/,{ + SCR_JUMP, + PADDRH(tryloop), + +#ifdef SCSI_NCR_CCB_DONE_SUPPORT + +}/*------------------------< DONE_QUEUE >-------------------*/,{ +/* +** Copy the CCB address to the next done entry. +** Because the size depends on the +** #define MAX_DONE parameter, it is filled +** in at runtime. +** +**----------------------------------------------------------- +** +** ##===========< I=0; i<MAX_DONE >=========== +** || SCR_COPY (sizeof(struct ccb *), +** || NADDR (header.cp), +** || NADDR (ccb_done[i]), +** || SCR_CALL, +** || PADDR (done_end), +** ##========================================== +** +**----------------------------------------------------------- +*/ +0 +}/*------------------------< DONE_QUEUE2 >------------------*/,{ + SCR_JUMP, + PADDRH (done_queue), + +#endif /* SCSI_NCR_CCB_DONE_SUPPORT */ +}/*------------------------< SELECT_NO_ATN >-----------------*/,{ + /* + ** Set Initiator mode. + ** And try to select this target without ATN. + */ + + SCR_CLR (SCR_TRG), + 0, + SCR_LOAD_REG (HS_REG, HS_SELECTING), + 0, + SCR_SEL_TBL ^ offsetof (struct dsb, select), + PADDR (reselect), + SCR_JUMP, + PADDR (select2), + +}/*-------------------------< CANCEL >------------------------*/,{ + + SCR_LOAD_REG (scratcha, HS_ABORTED), + 0, + SCR_JUMPR, + 8, +}/*-------------------------< SKIP >------------------------*/,{ + SCR_LOAD_REG (scratcha, 0), + 0, + /* + ** This entry has been canceled. + ** Next time use the next slot. + */ + SCR_COPY (4), + RADDR (temp), + PADDR (startpos), + /* + ** The ncr doesn't have an indirect load + ** or store command. So we have to + ** copy part of the control block to a + ** fixed place, where we can access it. + ** + ** We patch the address part of a + ** COPY command with the DSA-register. + */ + SCR_COPY_F (4), + RADDR (dsa), + PADDRH (skip2), + /* + ** Flush script prefetch if required + */ + PREFETCH_FLUSH + /* + ** then we do the actual copy. + */ + SCR_COPY (sizeof (struct head)), + /* + ** continued after the next label ... + */ +}/*-------------------------< SKIP2 >---------------------*/,{ + 0, + NADDR (header), + /* + ** Initialize the status registers + */ + SCR_COPY (4), + NADDR (header.status), + RADDR (scr0), + /* + ** Force host status. + */ + SCR_FROM_REG (scratcha), + 0, + SCR_JUMPR ^ IFFALSE (MASK (0, HS_DONEMASK)), + 16, + SCR_REG_REG (HS_REG, SCR_OR, HS_SKIPMASK), + 0, + SCR_JUMPR, + 8, + SCR_TO_REG (HS_REG), + 0, + SCR_LOAD_REG (SS_REG, S_GOOD), + 0, + SCR_JUMP, + PADDR (cleanup_ok), + +},/*-------------------------< PAR_ERR_DATA_IN >---------------*/{ + /* + ** Ignore all data in byte, until next phase + */ + SCR_JUMP ^ IFFALSE (WHEN (SCR_DATA_IN)), + PADDRH (par_err_other), + SCR_MOVE_ABS (1) ^ SCR_DATA_IN, + NADDR (scratch), + SCR_JUMPR, + -24, +},/*-------------------------< PAR_ERR_OTHER >------------------*/{ + /* + ** count it. + */ + SCR_REG_REG (PS_REG, SCR_ADD, 0x01), + 0, + /* + ** jump to dispatcher. + */ + SCR_JUMP, + PADDR (dispatch), +}/*-------------------------< MSG_REJECT >---------------*/,{ + /* + ** If a negotiation was in progress, + ** negotiation failed. + ** Otherwise, let the C code print + ** some message. + */ + SCR_FROM_REG (HS_REG), + 0, + SCR_INT ^ IFFALSE (DATA (HS_NEGOTIATE)), + SIR_REJECT_RECEIVED, + SCR_INT ^ IFTRUE (DATA (HS_NEGOTIATE)), + SIR_NEGO_FAILED, + SCR_JUMP, + PADDR (clrack), + +}/*-------------------------< MSG_IGN_RESIDUE >----------*/,{ + /* + ** Terminate cycle + */ + SCR_CLR (SCR_ACK), + 0, + SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_IN)), + PADDR (dispatch), + /* + ** get residue size. + */ + SCR_MOVE_ABS (1) ^ SCR_MSG_IN, + NADDR (msgin[1]), + /* + ** Size is 0 .. ignore message. + */ + SCR_JUMP ^ IFTRUE (DATA (0)), + PADDR (clrack), + /* + ** Size is not 1 .. have to interrupt. + */ + SCR_JUMPR ^ IFFALSE (DATA (1)), + 40, + /* + ** Check for residue byte in swide register + */ + SCR_FROM_REG (scntl2), + 0, + SCR_JUMPR ^ IFFALSE (MASK (WSR, WSR)), + 16, + /* + ** There IS data in the swide register. + ** Discard it. + */ + SCR_REG_REG (scntl2, SCR_OR, WSR), + 0, + SCR_JUMP, + PADDR (clrack), + /* + ** Load again the size to the sfbr register. + */ + SCR_FROM_REG (scratcha), + 0, + SCR_INT, + SIR_IGN_RESIDUE, + SCR_JUMP, + PADDR (clrack), + +}/*-------------------------< MSG_EXTENDED >-------------*/,{ + /* + ** Terminate cycle + */ + SCR_CLR (SCR_ACK), + 0, + SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_IN)), + PADDR (dispatch), + /* + ** get length. + */ + SCR_MOVE_ABS (1) ^ SCR_MSG_IN, + NADDR (msgin[1]), + /* + */ + SCR_JUMP ^ IFTRUE (DATA (3)), + PADDRH (msg_ext_3), + SCR_JUMP ^ IFFALSE (DATA (2)), + PADDR (msg_bad), +}/*-------------------------< MSG_EXT_2 >----------------*/,{ + SCR_CLR (SCR_ACK), + 0, + SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_IN)), + PADDR (dispatch), + /* + ** get extended message code. + */ + SCR_MOVE_ABS (1) ^ SCR_MSG_IN, + NADDR (msgin[2]), + SCR_JUMP ^ IFTRUE (DATA (EXTENDED_WDTR)), + PADDRH (msg_wdtr), + /* + ** unknown extended message + */ + SCR_JUMP, + PADDR (msg_bad) +}/*-------------------------< MSG_WDTR >-----------------*/,{ + SCR_CLR (SCR_ACK), + 0, + SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_IN)), + PADDR (dispatch), + /* + ** get data bus width + */ + SCR_MOVE_ABS (1) ^ SCR_MSG_IN, + NADDR (msgin[3]), + /* + ** let the host do the real work. + */ + SCR_INT, + SIR_NEGO_WIDE, + /* + ** let the target fetch our answer. + */ + SCR_SET (SCR_ATN), + 0, + SCR_CLR (SCR_ACK), + 0, + SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_OUT)), + PADDRH (nego_bad_phase), + +}/*-------------------------< SEND_WDTR >----------------*/,{ + /* + ** Send the EXTENDED_WDTR + */ + SCR_MOVE_ABS (4) ^ SCR_MSG_OUT, + NADDR (msgout), + SCR_COPY (1), + NADDR (msgout), + NADDR (lastmsg), + SCR_JUMP, + PADDR (msg_out_done), + +}/*-------------------------< MSG_EXT_3 >----------------*/,{ + SCR_CLR (SCR_ACK), + 0, + SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_IN)), + PADDR (dispatch), + /* + ** get extended message code. + */ + SCR_MOVE_ABS (1) ^ SCR_MSG_IN, + NADDR (msgin[2]), + SCR_JUMP ^ IFTRUE (DATA (EXTENDED_SDTR)), + PADDRH (msg_sdtr), + /* + ** unknown extended message + */ + SCR_JUMP, + PADDR (msg_bad) + +}/*-------------------------< MSG_SDTR >-----------------*/,{ + SCR_CLR (SCR_ACK), + 0, + SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_IN)), + PADDR (dispatch), + /* + ** get period and offset + */ + SCR_MOVE_ABS (2) ^ SCR_MSG_IN, + NADDR (msgin[3]), + /* + ** let the host do the real work. + */ + SCR_INT, + SIR_NEGO_SYNC, + /* + ** let the target fetch our answer. + */ + SCR_SET (SCR_ATN), + 0, + SCR_CLR (SCR_ACK), + 0, + SCR_JUMP ^ IFFALSE (WHEN (SCR_MSG_OUT)), + PADDRH (nego_bad_phase), + +}/*-------------------------< SEND_SDTR >-------------*/,{ + /* + ** Send the EXTENDED_SDTR + */ + SCR_MOVE_ABS (5) ^ SCR_MSG_OUT, + NADDR (msgout), + SCR_COPY (1), + NADDR (msgout), + NADDR (lastmsg), + SCR_JUMP, + PADDR (msg_out_done), + +}/*-------------------------< NEGO_BAD_PHASE >------------*/,{ + SCR_INT, + SIR_NEGO_PROTO, + SCR_JUMP, + PADDR (dispatch), + +}/*-------------------------< MSG_OUT_ABORT >-------------*/,{ + /* + ** After ABORT message, + ** + ** expect an immediate disconnect, ... + */ + SCR_REG_REG (scntl2, SCR_AND, 0x7f), + 0, + SCR_CLR (SCR_ACK|SCR_ATN), + 0, + SCR_WAIT_DISC, + 0, + /* + ** ... and set the status to "ABORTED" + */ + SCR_LOAD_REG (HS_REG, HS_ABORTED), + 0, + SCR_JUMP, + PADDR (cleanup), + +}/*-------------------------< HDATA_IN >-------------------*/,{ +/* +** Because the size depends on the +** #define MAX_SCATTERH parameter, +** it is filled in at runtime. +** +** ##==< i=MAX_SCATTERL; i<MAX_SCATTERL+MAX_SCATTERH >== +** || SCR_CALL ^ IFFALSE (WHEN (SCR_DATA_IN)), +** || PADDR (dispatch), +** || SCR_MOVE_TBL ^ SCR_DATA_IN, +** || offsetof (struct dsb, data[ i]), +** ##=================================================== +** +**--------------------------------------------------------- +*/ +0 +}/*-------------------------< HDATA_IN2 >------------------*/,{ + SCR_JUMP, + PADDR (data_in), + +}/*-------------------------< HDATA_OUT >-------------------*/,{ +/* +** Because the size depends on the +** #define MAX_SCATTERH parameter, +** it is filled in at runtime. +** +** ##==< i=MAX_SCATTERL; i<MAX_SCATTERL+MAX_SCATTERH >== +** || SCR_CALL ^ IFFALSE (WHEN (SCR_DATA_OUT)), +** || PADDR (dispatch), +** || SCR_MOVE_TBL ^ SCR_DATA_OUT, +** || offsetof (struct dsb, data[ i]), +** ##=================================================== +** +**--------------------------------------------------------- +*/ +0 +}/*-------------------------< HDATA_OUT2 >------------------*/,{ + SCR_JUMP, + PADDR (data_out), + +}/*-------------------------< RESET >----------------------*/,{ + /* + ** Send a TARGET_RESET message if bad IDENTIFY + ** received on reselection. + */ + SCR_LOAD_REG (scratcha, ABORT_TASK), + 0, + SCR_JUMP, + PADDRH (abort_resel), +}/*-------------------------< ABORTTAG >-------------------*/,{ + /* + ** Abort a wrong tag received on reselection. + */ + SCR_LOAD_REG (scratcha, ABORT_TASK), + 0, + SCR_JUMP, + PADDRH (abort_resel), +}/*-------------------------< ABORT >----------------------*/,{ + /* + ** Abort a reselection when no active CCB. + */ + SCR_LOAD_REG (scratcha, ABORT_TASK_SET), + 0, +}/*-------------------------< ABORT_RESEL >----------------*/,{ + SCR_COPY (1), + RADDR (scratcha), + NADDR (msgout), + SCR_SET (SCR_ATN), + 0, + SCR_CLR (SCR_ACK), + 0, + /* + ** and send it. + ** we expect an immediate disconnect + */ + SCR_REG_REG (scntl2, SCR_AND, 0x7f), + 0, + SCR_MOVE_ABS (1) ^ SCR_MSG_OUT, + NADDR (msgout), + SCR_COPY (1), + NADDR (msgout), + NADDR (lastmsg), + SCR_CLR (SCR_ACK|SCR_ATN), + 0, + SCR_WAIT_DISC, + 0, + SCR_JUMP, + PADDR (start), +}/*-------------------------< RESEND_IDENT >-------------------*/,{ + /* + ** The target stays in MSG OUT phase after having acked + ** Identify [+ Tag [+ Extended message ]]. Targets shall + ** behave this way on parity error. + ** We must send it again all the messages. + */ + SCR_SET (SCR_ATN), /* Shall be asserted 2 deskew delays before the */ + 0, /* 1rst ACK = 90 ns. Hope the NCR is'nt too fast */ + SCR_JUMP, + PADDR (send_ident), +}/*-------------------------< CLRATN_GO_ON >-------------------*/,{ + SCR_CLR (SCR_ATN), + 0, + SCR_JUMP, +}/*-------------------------< NXTDSP_GO_ON >-------------------*/,{ + 0, +}/*-------------------------< SDATA_IN >-------------------*/,{ + SCR_CALL ^ IFFALSE (WHEN (SCR_DATA_IN)), + PADDR (dispatch), + SCR_MOVE_TBL ^ SCR_DATA_IN, + offsetof (struct dsb, sense), + SCR_CALL, + PADDR (dispatch), + SCR_JUMP, + PADDR (no_data), +}/*-------------------------< DATA_IO >--------------------*/,{ + /* + ** We jump here if the data direction was unknown at the + ** time we had to queue the command to the scripts processor. + ** Pointers had been set as follow in this situation: + ** savep --> DATA_IO + ** lastp --> start pointer when DATA_IN + ** goalp --> goal pointer when DATA_IN + ** wlastp --> start pointer when DATA_OUT + ** wgoalp --> goal pointer when DATA_OUT + ** This script sets savep/lastp/goalp according to the + ** direction chosen by the target. + */ + SCR_JUMPR ^ IFTRUE (WHEN (SCR_DATA_OUT)), + 32, + /* + ** Direction is DATA IN. + ** Warning: we jump here, even when phase is DATA OUT. + */ + SCR_COPY (4), + NADDR (header.lastp), + NADDR (header.savep), + + /* + ** Jump to the SCRIPTS according to actual direction. + */ + SCR_COPY (4), + NADDR (header.savep), + RADDR (temp), + SCR_RETURN, + 0, + /* + ** Direction is DATA OUT. + */ + SCR_COPY (4), + NADDR (header.wlastp), + NADDR (header.lastp), + SCR_COPY (4), + NADDR (header.wgoalp), + NADDR (header.goalp), + SCR_JUMPR, + -64, +}/*-------------------------< BAD_IDENTIFY >---------------*/,{ + /* + ** If message phase but not an IDENTIFY, + ** get some help from the C code. + ** Old SCSI device may behave so. + */ + SCR_JUMPR ^ IFTRUE (MASK (0x80, 0x80)), + 16, + SCR_INT, + SIR_RESEL_NO_IDENTIFY, + SCR_JUMP, + PADDRH (reset), + /* + ** Message is an IDENTIFY, but lun is unknown. + ** Read the message, since we got it directly + ** from the SCSI BUS data lines. + ** Signal problem to C code for logging the event. + ** Send an ABORT_TASK_SET to clear all pending tasks. + */ + SCR_INT, + SIR_RESEL_BAD_LUN, + SCR_MOVE_ABS (1) ^ SCR_MSG_IN, + NADDR (msgin), + SCR_JUMP, + PADDRH (abort), +}/*-------------------------< BAD_I_T_L >------------------*/,{ + /* + ** We donnot have a task for that I_T_L. + ** Signal problem to C code for logging the event. + ** Send an ABORT_TASK_SET message. + */ + SCR_INT, + SIR_RESEL_BAD_I_T_L, + SCR_JUMP, + PADDRH (abort), +}/*-------------------------< BAD_I_T_L_Q >----------------*/,{ + /* + ** We donnot have a task that matches the tag. + ** Signal problem to C code for logging the event. + ** Send an ABORT_TASK message. + */ + SCR_INT, + SIR_RESEL_BAD_I_T_L_Q, + SCR_JUMP, + PADDRH (aborttag), +}/*-------------------------< BAD_TARGET >-----------------*/,{ + /* + ** We donnot know the target that reselected us. + ** Grab the first message if any (IDENTIFY). + ** Signal problem to C code for logging the event. + ** TARGET_RESET message. + */ + SCR_INT, + SIR_RESEL_BAD_TARGET, + SCR_JUMPR ^ IFFALSE (WHEN (SCR_MSG_IN)), + 8, + SCR_MOVE_ABS (1) ^ SCR_MSG_IN, + NADDR (msgin), + SCR_JUMP, + PADDRH (reset), +}/*-------------------------< BAD_STATUS >-----------------*/,{ + /* + ** If command resulted in either QUEUE FULL, + ** CHECK CONDITION or COMMAND TERMINATED, + ** call the C code. + */ + SCR_INT ^ IFTRUE (DATA (S_QUEUE_FULL)), + SIR_BAD_STATUS, + SCR_INT ^ IFTRUE (DATA (S_CHECK_COND)), + SIR_BAD_STATUS, + SCR_INT ^ IFTRUE (DATA (S_TERMINATED)), + SIR_BAD_STATUS, + SCR_RETURN, + 0, +}/*-------------------------< START_RAM >-------------------*/,{ + /* + ** Load the script into on-chip RAM, + ** and jump to start point. + */ + SCR_COPY_F (4), + RADDR (scratcha), + PADDRH (start_ram0), + /* + ** Flush script prefetch if required + */ + PREFETCH_FLUSH + SCR_COPY (sizeof (struct script)), +}/*-------------------------< START_RAM0 >--------------------*/,{ + 0, + PADDR (start), + SCR_JUMP, + PADDR (start), +}/*-------------------------< STO_RESTART >-------------------*/,{ + /* + ** + ** Repair start queue (e.g. next time use the next slot) + ** and jump to start point. + */ + SCR_COPY (4), + RADDR (temp), + PADDR (startpos), + SCR_JUMP, + PADDR (start), +}/*-------------------------< WAIT_DMA >-------------------*/,{ + /* + ** For HP Zalon/53c720 systems, the Zalon interface + ** between CPU and 53c720 does prefetches, which causes + ** problems with self modifying scripts. The problem + ** is overcome by calling a dummy subroutine after each + ** modification, to force a refetch of the script on + ** return from the subroutine. + */ + SCR_RETURN, + 0, +}/*-------------------------< SNOOPTEST >-------------------*/,{ + /* + ** Read the variable. + */ + SCR_COPY (4), + NADDR(ncr_cache), + RADDR (scratcha), + /* + ** Write the variable. + */ + SCR_COPY (4), + RADDR (temp), + NADDR(ncr_cache), + /* + ** Read back the variable. + */ + SCR_COPY (4), + NADDR(ncr_cache), + RADDR (temp), +}/*-------------------------< SNOOPEND >-------------------*/,{ + /* + ** And stop. + */ + SCR_INT, + 99, +}/*--------------------------------------------------------*/ +}; + +/*========================================================== +** +** +** Fill in #define dependent parts of the script +** +** +**========================================================== +*/ + +void __init ncr_script_fill (struct script * scr, struct scripth * scrh) +{ + int i; + ncrcmd *p; + + p = scrh->tryloop; + for (i=0; i<MAX_START; i++) { + *p++ =SCR_CALL; + *p++ =PADDR (idle); + } + + BUG_ON((u_long)p != (u_long)&scrh->tryloop + sizeof (scrh->tryloop)); + +#ifdef SCSI_NCR_CCB_DONE_SUPPORT + + p = scrh->done_queue; + for (i = 0; i<MAX_DONE; i++) { + *p++ =SCR_COPY (sizeof(struct ccb *)); + *p++ =NADDR (header.cp); + *p++ =NADDR (ccb_done[i]); + *p++ =SCR_CALL; + *p++ =PADDR (done_end); + } + + BUG_ON((u_long)p != (u_long)&scrh->done_queue+sizeof(scrh->done_queue)); + +#endif /* SCSI_NCR_CCB_DONE_SUPPORT */ + + p = scrh->hdata_in; + for (i=0; i<MAX_SCATTERH; i++) { + *p++ =SCR_CALL ^ IFFALSE (WHEN (SCR_DATA_IN)); + *p++ =PADDR (dispatch); + *p++ =SCR_MOVE_TBL ^ SCR_DATA_IN; + *p++ =offsetof (struct dsb, data[i]); + } + + BUG_ON((u_long)p != (u_long)&scrh->hdata_in + sizeof (scrh->hdata_in)); + + p = scr->data_in; + for (i=MAX_SCATTERH; i<MAX_SCATTERH+MAX_SCATTERL; i++) { + *p++ =SCR_CALL ^ IFFALSE (WHEN (SCR_DATA_IN)); + *p++ =PADDR (dispatch); + *p++ =SCR_MOVE_TBL ^ SCR_DATA_IN; + *p++ =offsetof (struct dsb, data[i]); + } + + BUG_ON((u_long)p != (u_long)&scr->data_in + sizeof (scr->data_in)); + + p = scrh->hdata_out; + for (i=0; i<MAX_SCATTERH; i++) { + *p++ =SCR_CALL ^ IFFALSE (WHEN (SCR_DATA_OUT)); + *p++ =PADDR (dispatch); + *p++ =SCR_MOVE_TBL ^ SCR_DATA_OUT; + *p++ =offsetof (struct dsb, data[i]); + } + + BUG_ON((u_long)p != (u_long)&scrh->hdata_out + sizeof (scrh->hdata_out)); + + p = scr->data_out; + for (i=MAX_SCATTERH; i<MAX_SCATTERH+MAX_SCATTERL; i++) { + *p++ =SCR_CALL ^ IFFALSE (WHEN (SCR_DATA_OUT)); + *p++ =PADDR (dispatch); + *p++ =SCR_MOVE_TBL ^ SCR_DATA_OUT; + *p++ =offsetof (struct dsb, data[i]); + } + + BUG_ON((u_long) p != (u_long)&scr->data_out + sizeof (scr->data_out)); +} + +/*========================================================== +** +** +** Copy and rebind a script. +** +** +**========================================================== +*/ + +static void __init +ncr_script_copy_and_bind (struct ncb *np, ncrcmd *src, ncrcmd *dst, int len) +{ + ncrcmd opcode, new, old, tmp1, tmp2; + ncrcmd *start, *end; + int relocs; + int opchanged = 0; + + start = src; + end = src + len/4; + + while (src < end) { + + opcode = *src++; + *dst++ = cpu_to_scr(opcode); + + /* + ** If we forget to change the length + ** in struct script, a field will be + ** padded with 0. This is an illegal + ** command. + */ + + if (opcode == 0) { + printk (KERN_ERR "%s: ERROR0 IN SCRIPT at %d.\n", + ncr_name(np), (int) (src-start-1)); + mdelay(1000); + } + + if (DEBUG_FLAGS & DEBUG_SCRIPT) + printk (KERN_DEBUG "%p: <%x>\n", + (src-1), (unsigned)opcode); + + /* + ** We don't have to decode ALL commands + */ + switch (opcode >> 28) { + + case 0xc: + /* + ** COPY has TWO arguments. + */ + relocs = 2; + tmp1 = src[0]; +#ifdef RELOC_KVAR + if ((tmp1 & RELOC_MASK) == RELOC_KVAR) + tmp1 = 0; +#endif + tmp2 = src[1]; +#ifdef RELOC_KVAR + if ((tmp2 & RELOC_MASK) == RELOC_KVAR) + tmp2 = 0; +#endif + if ((tmp1 ^ tmp2) & 3) { + printk (KERN_ERR"%s: ERROR1 IN SCRIPT at %d.\n", + ncr_name(np), (int) (src-start-1)); + mdelay(1000); + } + /* + ** If PREFETCH feature not enabled, remove + ** the NO FLUSH bit if present. + */ + if ((opcode & SCR_NO_FLUSH) && !(np->features & FE_PFEN)) { + dst[-1] = cpu_to_scr(opcode & ~SCR_NO_FLUSH); + ++opchanged; + } + break; + + case 0x0: + /* + ** MOVE (absolute address) + */ + relocs = 1; + break; + + case 0x8: + /* + ** JUMP / CALL + ** don't relocate if relative :-) + */ + if (opcode & 0x00800000) + relocs = 0; + else + relocs = 1; + break; + + case 0x4: + case 0x5: + case 0x6: + case 0x7: + relocs = 1; + break; + + default: + relocs = 0; + break; + } + + if (relocs) { + while (relocs--) { + old = *src++; + + switch (old & RELOC_MASK) { + case RELOC_REGISTER: + new = (old & ~RELOC_MASK) + np->paddr; + break; + case RELOC_LABEL: + new = (old & ~RELOC_MASK) + np->p_script; + break; + case RELOC_LABELH: + new = (old & ~RELOC_MASK) + np->p_scripth; + break; + case RELOC_SOFTC: + new = (old & ~RELOC_MASK) + np->p_ncb; + break; +#ifdef RELOC_KVAR + case RELOC_KVAR: + if (((old & ~RELOC_MASK) < + SCRIPT_KVAR_FIRST) || + ((old & ~RELOC_MASK) > + SCRIPT_KVAR_LAST)) + panic("ncr KVAR out of range"); + new = vtophys(script_kvars[old & + ~RELOC_MASK]); + break; +#endif + case 0: + /* Don't relocate a 0 address. */ + if (old == 0) { + new = old; + break; + } + /* fall through */ + default: + panic("ncr_script_copy_and_bind: weird relocation %x\n", old); + break; + } + + *dst++ = cpu_to_scr(new); + } + } else + *dst++ = cpu_to_scr(*src++); + + } +} + +/* +** Linux host data structure +*/ + +struct host_data { + struct ncb *ncb; +}; + +#define PRINT_ADDR(cmd, arg...) dev_info(&cmd->device->sdev_gendev , ## arg) + +static void ncr_print_msg(struct ccb *cp, char *label, u_char *msg) +{ + PRINT_ADDR(cp->cmd, "%s: ", label); + + spi_print_msg(msg); + printk("\n"); +} + +/*========================================================== +** +** NCR chip clock divisor table. +** Divisors are multiplied by 10,000,000 in order to make +** calculations more simple. +** +**========================================================== +*/ + +#define _5M 5000000 +static u_long div_10M[] = + {2*_5M, 3*_5M, 4*_5M, 6*_5M, 8*_5M, 12*_5M, 16*_5M}; + + +/*=============================================================== +** +** Prepare io register values used by ncr_init() according +** to selected and supported features. +** +** NCR chips allow burst lengths of 2, 4, 8, 16, 32, 64, 128 +** transfers. 32,64,128 are only supported by 875 and 895 chips. +** We use log base 2 (burst length) as internal code, with +** value 0 meaning "burst disabled". +** +**=============================================================== +*/ + +/* + * Burst length from burst code. + */ +#define burst_length(bc) (!(bc))? 0 : 1 << (bc) + +/* + * Burst code from io register bits. Burst enable is ctest0 for c720 + */ +#define burst_code(dmode, ctest0) \ + (ctest0) & 0x80 ? 0 : (((dmode) & 0xc0) >> 6) + 1 + +/* + * Set initial io register bits from burst code. + */ +static inline void ncr_init_burst(struct ncb *np, u_char bc) +{ + u_char *be = &np->rv_ctest0; + *be &= ~0x80; + np->rv_dmode &= ~(0x3 << 6); + np->rv_ctest5 &= ~0x4; + + if (!bc) { + *be |= 0x80; + } else { + --bc; + np->rv_dmode |= ((bc & 0x3) << 6); + np->rv_ctest5 |= (bc & 0x4); + } +} + +static void __init ncr_prepare_setting(struct ncb *np) +{ + u_char burst_max; + u_long period; + int i; + + /* + ** Save assumed BIOS setting + */ + + np->sv_scntl0 = INB(nc_scntl0) & 0x0a; + np->sv_scntl3 = INB(nc_scntl3) & 0x07; + np->sv_dmode = INB(nc_dmode) & 0xce; + np->sv_dcntl = INB(nc_dcntl) & 0xa8; + np->sv_ctest0 = INB(nc_ctest0) & 0x84; + np->sv_ctest3 = INB(nc_ctest3) & 0x01; + np->sv_ctest4 = INB(nc_ctest4) & 0x80; + np->sv_ctest5 = INB(nc_ctest5) & 0x24; + np->sv_gpcntl = INB(nc_gpcntl); + np->sv_stest2 = INB(nc_stest2) & 0x20; + np->sv_stest4 = INB(nc_stest4); + + /* + ** Wide ? + */ + + np->maxwide = (np->features & FE_WIDE)? 1 : 0; + + /* + * Guess the frequency of the chip's clock. + */ + if (np->features & FE_ULTRA) + np->clock_khz = 80000; + else + np->clock_khz = 40000; + + /* + * Get the clock multiplier factor. + */ + if (np->features & FE_QUAD) + np->multiplier = 4; + else if (np->features & FE_DBLR) + np->multiplier = 2; + else + np->multiplier = 1; + + /* + * Measure SCSI clock frequency for chips + * it may vary from assumed one. + */ + if (np->features & FE_VARCLK) + ncr_getclock(np, np->multiplier); + + /* + * Divisor to be used for async (timer pre-scaler). + */ + i = np->clock_divn - 1; + while (--i >= 0) { + if (10ul * SCSI_NCR_MIN_ASYNC * np->clock_khz > div_10M[i]) { + ++i; + break; + } + } + np->rv_scntl3 = i+1; + + /* + * Minimum synchronous period factor supported by the chip. + * Btw, 'period' is in tenths of nanoseconds. + */ + + period = (4 * div_10M[0] + np->clock_khz - 1) / np->clock_khz; + if (period <= 250) np->minsync = 10; + else if (period <= 303) np->minsync = 11; + else if (period <= 500) np->minsync = 12; + else np->minsync = (period + 40 - 1) / 40; + + /* + * Check against chip SCSI standard support (SCSI-2,ULTRA,ULTRA2). + */ + + if (np->minsync < 25 && !(np->features & FE_ULTRA)) + np->minsync = 25; + + /* + * Maximum synchronous period factor supported by the chip. + */ + + period = (11 * div_10M[np->clock_divn - 1]) / (4 * np->clock_khz); + np->maxsync = period > 2540 ? 254 : period / 10; + + /* + ** Prepare initial value of other IO registers + */ +#if defined SCSI_NCR_TRUST_BIOS_SETTING + np->rv_scntl0 = np->sv_scntl0; + np->rv_dmode = np->sv_dmode; + np->rv_dcntl = np->sv_dcntl; + np->rv_ctest0 = np->sv_ctest0; + np->rv_ctest3 = np->sv_ctest3; + np->rv_ctest4 = np->sv_ctest4; + np->rv_ctest5 = np->sv_ctest5; + burst_max = burst_code(np->sv_dmode, np->sv_ctest0); +#else + + /* + ** Select burst length (dwords) + */ + burst_max = driver_setup.burst_max; + if (burst_max == 255) + burst_max = burst_code(np->sv_dmode, np->sv_ctest0); + if (burst_max > 7) + burst_max = 7; + if (burst_max > np->maxburst) + burst_max = np->maxburst; + + /* + ** Select all supported special features + */ + if (np->features & FE_ERL) + np->rv_dmode |= ERL; /* Enable Read Line */ + if (np->features & FE_BOF) + np->rv_dmode |= BOF; /* Burst Opcode Fetch */ + if (np->features & FE_ERMP) + np->rv_dmode |= ERMP; /* Enable Read Multiple */ + if (np->features & FE_PFEN) + np->rv_dcntl |= PFEN; /* Prefetch Enable */ + if (np->features & FE_CLSE) + np->rv_dcntl |= CLSE; /* Cache Line Size Enable */ + if (np->features & FE_WRIE) + np->rv_ctest3 |= WRIE; /* Write and Invalidate */ + if (np->features & FE_DFS) + np->rv_ctest5 |= DFS; /* Dma Fifo Size */ + if (np->features & FE_MUX) + np->rv_ctest4 |= MUX; /* Host bus multiplex mode */ + if (np->features & FE_EA) + np->rv_dcntl |= EA; /* Enable ACK */ + if (np->features & FE_EHP) + np->rv_ctest0 |= EHP; /* Even host parity */ + + /* + ** Select some other + */ + if (driver_setup.master_parity) + np->rv_ctest4 |= MPEE; /* Master parity checking */ + if (driver_setup.scsi_parity) + np->rv_scntl0 |= 0x0a; /* full arb., ena parity, par->ATN */ + + /* + ** Get SCSI addr of host adapter (set by bios?). + */ + if (np->myaddr == 255) { + np->myaddr = INB(nc_scid) & 0x07; + if (!np->myaddr) + np->myaddr = SCSI_NCR_MYADDR; + } + +#endif /* SCSI_NCR_TRUST_BIOS_SETTING */ + + /* + * Prepare initial io register bits for burst length + */ + ncr_init_burst(np, burst_max); + + /* + ** Set SCSI BUS mode. + ** + ** - ULTRA2 chips (895/895A/896) report the current + ** BUS mode through the STEST4 IO register. + ** - For previous generation chips (825/825A/875), + ** user has to tell us how to check against HVD, + ** since a 100% safe algorithm is not possible. + */ + np->scsi_mode = SMODE_SE; + if (np->features & FE_DIFF) { + switch(driver_setup.diff_support) { + case 4: /* Trust previous settings if present, then GPIO3 */ + if (np->sv_scntl3) { + if (np->sv_stest2 & 0x20) + np->scsi_mode = SMODE_HVD; + break; + } + case 3: /* SYMBIOS controllers report HVD through GPIO3 */ + if (INB(nc_gpreg) & 0x08) + break; + case 2: /* Set HVD unconditionally */ + np->scsi_mode = SMODE_HVD; + case 1: /* Trust previous settings for HVD */ + if (np->sv_stest2 & 0x20) + np->scsi_mode = SMODE_HVD; + break; + default:/* Don't care about HVD */ + break; + } + } + if (np->scsi_mode == SMODE_HVD) + np->rv_stest2 |= 0x20; + + /* + ** Set LED support from SCRIPTS. + ** Ignore this feature for boards known to use a + ** specific GPIO wiring and for the 895A or 896 + ** that drive the LED directly. + ** Also probe initial setting of GPIO0 as output. + */ + if ((driver_setup.led_pin) && + !(np->features & FE_LEDC) && !(np->sv_gpcntl & 0x01)) + np->features |= FE_LED0; + + /* + ** Set irq mode. + */ + switch(driver_setup.irqm & 3) { + case 2: + np->rv_dcntl |= IRQM; + break; + case 1: + np->rv_dcntl |= (np->sv_dcntl & IRQM); + break; + default: + break; + } + + /* + ** Configure targets according to driver setup. + ** Allow to override sync, wide and NOSCAN from + ** boot command line. + */ + for (i = 0 ; i < MAX_TARGET ; i++) { + struct tcb *tp = &np->target[i]; + + tp->usrsync = driver_setup.default_sync; + tp->usrwide = driver_setup.max_wide; + tp->usrtags = MAX_TAGS; + tp->period = 0xffff; + if (!driver_setup.disconnection) + np->target[i].usrflag = UF_NODISC; + } + + /* + ** Announce all that stuff to user. + */ + + printk(KERN_INFO "%s: ID %d, Fast-%d%s%s\n", ncr_name(np), + np->myaddr, + np->minsync < 12 ? 40 : (np->minsync < 25 ? 20 : 10), + (np->rv_scntl0 & 0xa) ? ", Parity Checking" : ", NO Parity", + (np->rv_stest2 & 0x20) ? ", Differential" : ""); + + if (bootverbose > 1) { + printk (KERN_INFO "%s: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = " + "(hex) %02x/%02x/%02x/%02x/%02x/%02x\n", + ncr_name(np), np->sv_scntl3, np->sv_dmode, np->sv_dcntl, + np->sv_ctest3, np->sv_ctest4, np->sv_ctest5); + + printk (KERN_INFO "%s: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = " + "(hex) %02x/%02x/%02x/%02x/%02x/%02x\n", + ncr_name(np), np->rv_scntl3, np->rv_dmode, np->rv_dcntl, + np->rv_ctest3, np->rv_ctest4, np->rv_ctest5); + } + + if (bootverbose && np->paddr2) + printk (KERN_INFO "%s: on-chip RAM at 0x%lx\n", + ncr_name(np), np->paddr2); +} + +/*========================================================== +** +** +** Done SCSI commands list management. +** +** We donnot enter the scsi_done() callback immediately +** after a command has been seen as completed but we +** insert it into a list which is flushed outside any kind +** of driver critical section. +** This allows to do minimal stuff under interrupt and +** inside critical sections and to also avoid locking up +** on recursive calls to driver entry points under SMP. +** In fact, the only kernel point which is entered by the +** driver with a driver lock set is kmalloc(GFP_ATOMIC) +** that shall not reenter the driver under any circumstances, +** AFAIK. +** +**========================================================== +*/ +static inline void ncr_queue_done_cmd(struct ncb *np, struct scsi_cmnd *cmd) +{ + unmap_scsi_data(np, cmd); + cmd->host_scribble = (char *) np->done_list; + np->done_list = cmd; +} + +static inline void ncr_flush_done_cmds(struct scsi_cmnd *lcmd) +{ + struct scsi_cmnd *cmd; + + while (lcmd) { + cmd = lcmd; + lcmd = (struct scsi_cmnd *) cmd->host_scribble; + cmd->scsi_done(cmd); + } +} + +/*========================================================== +** +** +** Prepare the next negotiation message if needed. +** +** Fill in the part of message buffer that contains the +** negotiation and the nego_status field of the CCB. +** Returns the size of the message in bytes. +** +** +**========================================================== +*/ + + +static int ncr_prepare_nego(struct ncb *np, struct ccb *cp, u_char *msgptr) +{ + struct tcb *tp = &np->target[cp->target]; + int msglen = 0; + int nego = 0; + struct scsi_target *starget = tp->starget; + + /* negotiate wide transfers ? */ + if (!tp->widedone) { + if (spi_support_wide(starget)) { + nego = NS_WIDE; + } else + tp->widedone=1; + } + + /* negotiate synchronous transfers? */ + if (!nego && !tp->period) { + if (spi_support_sync(starget)) { + nego = NS_SYNC; + } else { + tp->period =0xffff; + dev_info(&starget->dev, "target did not report SYNC.\n"); + } + } + + switch (nego) { + case NS_SYNC: + msglen += spi_populate_sync_msg(msgptr + msglen, + tp->maxoffs ? tp->minsync : 0, tp->maxoffs); + break; + case NS_WIDE: + msglen += spi_populate_width_msg(msgptr + msglen, tp->usrwide); + break; + } + + cp->nego_status = nego; + + if (nego) { + tp->nego_cp = cp; + if (DEBUG_FLAGS & DEBUG_NEGO) { + ncr_print_msg(cp, nego == NS_WIDE ? + "wide msgout":"sync_msgout", msgptr); + } + } + + return msglen; +} + + + +/*========================================================== +** +** +** Start execution of a SCSI command. +** This is called from the generic SCSI driver. +** +** +**========================================================== +*/ +static int ncr_queue_command (struct ncb *np, struct scsi_cmnd *cmd) +{ + struct scsi_device *sdev = cmd->device; + struct tcb *tp = &np->target[sdev->id]; + struct lcb *lp = tp->lp[sdev->lun]; + struct ccb *cp; + + int segments; + u_char idmsg, *msgptr; + u32 msglen; + int direction; + u32 lastp, goalp; + + /*--------------------------------------------- + ** + ** Some shortcuts ... + ** + **--------------------------------------------- + */ + if ((sdev->id == np->myaddr ) || + (sdev->id >= MAX_TARGET) || + (sdev->lun >= MAX_LUN )) { + return(DID_BAD_TARGET); + } + + /*--------------------------------------------- + ** + ** Complete the 1st TEST UNIT READY command + ** with error condition if the device is + ** flagged NOSCAN, in order to speed up + ** the boot. + ** + **--------------------------------------------- + */ + if ((cmd->cmnd[0] == 0 || cmd->cmnd[0] == 0x12) && + (tp->usrflag & UF_NOSCAN)) { + tp->usrflag &= ~UF_NOSCAN; + return DID_BAD_TARGET; + } + + if (DEBUG_FLAGS & DEBUG_TINY) { + PRINT_ADDR(cmd, "CMD=%x ", cmd->cmnd[0]); + } + + /*--------------------------------------------------- + ** + ** Assign a ccb / bind cmd. + ** If resetting, shorten settle_time if necessary + ** in order to avoid spurious timeouts. + ** If resetting or no free ccb, + ** insert cmd into the waiting list. + ** + **---------------------------------------------------- + */ + if (np->settle_time && cmd->request->timeout >= HZ) { + u_long tlimit = jiffies + cmd->request->timeout - HZ; + if (time_after(np->settle_time, tlimit)) + np->settle_time = tlimit; + } + + if (np->settle_time || !(cp=ncr_get_ccb (np, cmd))) { + insert_into_waiting_list(np, cmd); + return(DID_OK); + } + cp->cmd = cmd; + + /*---------------------------------------------------- + ** + ** Build the identify / tag / sdtr message + ** + **---------------------------------------------------- + */ + + idmsg = IDENTIFY(0, sdev->lun); + + if (cp ->tag != NO_TAG || + (cp != np->ccb && np->disc && !(tp->usrflag & UF_NODISC))) + idmsg |= 0x40; + + msgptr = cp->scsi_smsg; + msglen = 0; + msgptr[msglen++] = idmsg; + + if (cp->tag != NO_TAG) { + char order = np->order; + + /* + ** Force ordered tag if necessary to avoid timeouts + ** and to preserve interactivity. + */ + if (lp && time_after(jiffies, lp->tags_stime)) { + if (lp->tags_smap) { + order = ORDERED_QUEUE_TAG; + if ((DEBUG_FLAGS & DEBUG_TAGS)||bootverbose>2){ + PRINT_ADDR(cmd, + "ordered tag forced.\n"); + } + } + lp->tags_stime = jiffies + 3*HZ; + lp->tags_smap = lp->tags_umap; + } + + if (order == 0) { + /* + ** Ordered write ops, unordered read ops. + */ + switch (cmd->cmnd[0]) { + case 0x08: /* READ_SMALL (6) */ + case 0x28: /* READ_BIG (10) */ + case 0xa8: /* READ_HUGE (12) */ + order = SIMPLE_QUEUE_TAG; + break; + default: + order = ORDERED_QUEUE_TAG; + } + } + msgptr[msglen++] = order; + /* + ** Actual tags are numbered 1,3,5,..2*MAXTAGS+1, + ** since we may have to deal with devices that have + ** problems with #TAG 0 or too great #TAG numbers. + */ + msgptr[msglen++] = (cp->tag << 1) + 1; + } + + /*---------------------------------------------------- + ** + ** Build the data descriptors + ** + **---------------------------------------------------- + */ + + direction = cmd->sc_data_direction; + if (direction != DMA_NONE) { + segments = ncr_scatter(np, cp, cp->cmd); + if (segments < 0) { + ncr_free_ccb(np, cp); + return(DID_ERROR); + } + } + else { + cp->data_len = 0; + segments = 0; + } + + /*--------------------------------------------------- + ** + ** negotiation required? + ** + ** (nego_status is filled by ncr_prepare_nego()) + ** + **--------------------------------------------------- + */ + + cp->nego_status = 0; + + if ((!tp->widedone || !tp->period) && !tp->nego_cp && lp) { + msglen += ncr_prepare_nego (np, cp, msgptr + msglen); + } + + /*---------------------------------------------------- + ** + ** Determine xfer direction. + ** + **---------------------------------------------------- + */ + if (!cp->data_len) + direction = DMA_NONE; + + /* + ** If data direction is BIDIRECTIONAL, speculate FROM_DEVICE + ** but prepare alternate pointers for TO_DEVICE in case + ** of our speculation will be just wrong. + ** SCRIPTS will swap values if needed. + */ + switch(direction) { + case DMA_BIDIRECTIONAL: + case DMA_TO_DEVICE: + goalp = NCB_SCRIPT_PHYS (np, data_out2) + 8; + if (segments <= MAX_SCATTERL) + lastp = goalp - 8 - (segments * 16); + else { + lastp = NCB_SCRIPTH_PHYS (np, hdata_out2); + lastp -= (segments - MAX_SCATTERL) * 16; + } + if (direction != DMA_BIDIRECTIONAL) + break; + cp->phys.header.wgoalp = cpu_to_scr(goalp); + cp->phys.header.wlastp = cpu_to_scr(lastp); + /* fall through */ + case DMA_FROM_DEVICE: + goalp = NCB_SCRIPT_PHYS (np, data_in2) + 8; + if (segments <= MAX_SCATTERL) + lastp = goalp - 8 - (segments * 16); + else { + lastp = NCB_SCRIPTH_PHYS (np, hdata_in2); + lastp -= (segments - MAX_SCATTERL) * 16; + } + break; + default: + case DMA_NONE: + lastp = goalp = NCB_SCRIPT_PHYS (np, no_data); + break; + } + + /* + ** Set all pointers values needed by SCRIPTS. + ** If direction is unknown, start at data_io. + */ + cp->phys.header.lastp = cpu_to_scr(lastp); + cp->phys.header.goalp = cpu_to_scr(goalp); + + if (direction == DMA_BIDIRECTIONAL) + cp->phys.header.savep = + cpu_to_scr(NCB_SCRIPTH_PHYS (np, data_io)); + else + cp->phys.header.savep= cpu_to_scr(lastp); + + /* + ** Save the initial data pointer in order to be able + ** to redo the command. + */ + cp->startp = cp->phys.header.savep; + + /*---------------------------------------------------- + ** + ** fill in ccb + ** + **---------------------------------------------------- + ** + ** + ** physical -> virtual backlink + ** Generic SCSI command + */ + + /* + ** Startqueue + */ + cp->start.schedule.l_paddr = cpu_to_scr(NCB_SCRIPT_PHYS (np, select)); + cp->restart.schedule.l_paddr = cpu_to_scr(NCB_SCRIPT_PHYS (np, resel_dsa)); + /* + ** select + */ + cp->phys.select.sel_id = sdev_id(sdev); + cp->phys.select.sel_scntl3 = tp->wval; + cp->phys.select.sel_sxfer = tp->sval; + /* + ** message + */ + cp->phys.smsg.addr = cpu_to_scr(CCB_PHYS (cp, scsi_smsg)); + cp->phys.smsg.size = cpu_to_scr(msglen); + + /* + ** command + */ + memcpy(cp->cdb_buf, cmd->cmnd, min_t(int, cmd->cmd_len, sizeof(cp->cdb_buf))); + cp->phys.cmd.addr = cpu_to_scr(CCB_PHYS (cp, cdb_buf[0])); + cp->phys.cmd.size = cpu_to_scr(cmd->cmd_len); + + /* + ** status + */ + cp->actualquirks = 0; + cp->host_status = cp->nego_status ? HS_NEGOTIATE : HS_BUSY; + cp->scsi_status = S_ILLEGAL; + cp->parity_status = 0; + + cp->xerr_status = XE_OK; +#if 0 + cp->sync_status = tp->sval; + cp->wide_status = tp->wval; +#endif + + /*---------------------------------------------------- + ** + ** Critical region: start this job. + ** + **---------------------------------------------------- + */ + + /* activate this job. */ + cp->magic = CCB_MAGIC; + + /* + ** insert next CCBs into start queue. + ** 2 max at a time is enough to flush the CCB wait queue. + */ + cp->auto_sense = 0; + if (lp) + ncr_start_next_ccb(np, lp, 2); + else + ncr_put_start_queue(np, cp); + + /* Command is successfully queued. */ + + return DID_OK; +} + + +/*========================================================== +** +** +** Insert a CCB into the start queue and wake up the +** SCRIPTS processor. +** +** +**========================================================== +*/ + +static void ncr_start_next_ccb(struct ncb *np, struct lcb *lp, int maxn) +{ + struct list_head *qp; + struct ccb *cp; + + if (lp->held_ccb) + return; + + while (maxn-- && lp->queuedccbs < lp->queuedepth) { + qp = ncr_list_pop(&lp->wait_ccbq); + if (!qp) + break; + ++lp->queuedccbs; + cp = list_entry(qp, struct ccb, link_ccbq); + list_add_tail(qp, &lp->busy_ccbq); + lp->jump_ccb[cp->tag == NO_TAG ? 0 : cp->tag] = + cpu_to_scr(CCB_PHYS (cp, restart)); + ncr_put_start_queue(np, cp); + } +} + +static void ncr_put_start_queue(struct ncb *np, struct ccb *cp) +{ + u16 qidx; + + /* + ** insert into start queue. + */ + if (!np->squeueput) np->squeueput = 1; + qidx = np->squeueput + 2; + if (qidx >= MAX_START + MAX_START) qidx = 1; + + np->scripth->tryloop [qidx] = cpu_to_scr(NCB_SCRIPT_PHYS (np, idle)); + MEMORY_BARRIER(); + np->scripth->tryloop [np->squeueput] = cpu_to_scr(CCB_PHYS (cp, start)); + + np->squeueput = qidx; + ++np->queuedccbs; + cp->queued = 1; + + if (DEBUG_FLAGS & DEBUG_QUEUE) + printk ("%s: queuepos=%d.\n", ncr_name (np), np->squeueput); + + /* + ** Script processor may be waiting for reselect. + ** Wake it up. + */ + MEMORY_BARRIER(); + OUTB (nc_istat, SIGP); +} + + +static int ncr_reset_scsi_bus(struct ncb *np, int enab_int, int settle_delay) +{ + u32 term; + int retv = 0; + + np->settle_time = jiffies + settle_delay * HZ; + + if (bootverbose > 1) + printk("%s: resetting, " + "command processing suspended for %d seconds\n", + ncr_name(np), settle_delay); + + ncr_chip_reset(np, 100); + udelay(2000); /* The 895 needs time for the bus mode to settle */ + if (enab_int) + OUTW (nc_sien, RST); + /* + ** Enable Tolerant, reset IRQD if present and + ** properly set IRQ mode, prior to resetting the bus. + */ + OUTB (nc_stest3, TE); + OUTB (nc_scntl1, CRST); + udelay(200); + + if (!driver_setup.bus_check) + goto out; + /* + ** Check for no terminators or SCSI bus shorts to ground. + ** Read SCSI data bus, data parity bits and control signals. + ** We are expecting RESET to be TRUE and other signals to be + ** FALSE. + */ + + term = INB(nc_sstat0); + term = ((term & 2) << 7) + ((term & 1) << 17); /* rst sdp0 */ + term |= ((INB(nc_sstat2) & 0x01) << 26) | /* sdp1 */ + ((INW(nc_sbdl) & 0xff) << 9) | /* d7-0 */ + ((INW(nc_sbdl) & 0xff00) << 10) | /* d15-8 */ + INB(nc_sbcl); /* req ack bsy sel atn msg cd io */ + + if (!(np->features & FE_WIDE)) + term &= 0x3ffff; + + if (term != (2<<7)) { + printk("%s: suspicious SCSI data while resetting the BUS.\n", + ncr_name(np)); + printk("%s: %sdp0,d7-0,rst,req,ack,bsy,sel,atn,msg,c/d,i/o = " + "0x%lx, expecting 0x%lx\n", + ncr_name(np), + (np->features & FE_WIDE) ? "dp1,d15-8," : "", + (u_long)term, (u_long)(2<<7)); + if (driver_setup.bus_check == 1) + retv = 1; + } +out: + OUTB (nc_scntl1, 0); + return retv; +} + +/* + * Start reset process. + * If reset in progress do nothing. + * The interrupt handler will reinitialize the chip. + * The timeout handler will wait for settle_time before + * clearing it and so resuming command processing. + */ +static void ncr_start_reset(struct ncb *np) +{ + if (!np->settle_time) { + ncr_reset_scsi_bus(np, 1, driver_setup.settle_delay); + } +} + +/*========================================================== +** +** +** Reset the SCSI BUS. +** This is called from the generic SCSI driver. +** +** +**========================================================== +*/ +static int ncr_reset_bus (struct ncb *np, struct scsi_cmnd *cmd, int sync_reset) +{ +/* struct scsi_device *device = cmd->device; */ + struct ccb *cp; + int found; + +/* + * Return immediately if reset is in progress. + */ + if (np->settle_time) { + return FAILED; + } +/* + * Start the reset process. + * The script processor is then assumed to be stopped. + * Commands will now be queued in the waiting list until a settle + * delay of 2 seconds will be completed. + */ + ncr_start_reset(np); +/* + * First, look in the wakeup list + */ + for (found=0, cp=np->ccb; cp; cp=cp->link_ccb) { + /* + ** look for the ccb of this command. + */ + if (cp->host_status == HS_IDLE) continue; + if (cp->cmd == cmd) { + found = 1; + break; + } + } +/* + * Then, look in the waiting list + */ + if (!found && retrieve_from_waiting_list(0, np, cmd)) + found = 1; +/* + * Wake-up all awaiting commands with DID_RESET. + */ + reset_waiting_list(np); +/* + * Wake-up all pending commands with HS_RESET -> DID_RESET. + */ + ncr_wakeup(np, HS_RESET); +/* + * If the involved command was not in a driver queue, and the + * scsi driver told us reset is synchronous, and the command is not + * currently in the waiting list, complete it with DID_RESET status, + * in order to keep it alive. + */ + if (!found && sync_reset && !retrieve_from_waiting_list(0, np, cmd)) { + cmd->result = ScsiResult(DID_RESET, 0); + ncr_queue_done_cmd(np, cmd); + } + + return SUCCESS; +} + +#if 0 /* unused and broken.. */ +/*========================================================== +** +** +** Abort an SCSI command. +** This is called from the generic SCSI driver. +** +** +**========================================================== +*/ +static int ncr_abort_command (struct ncb *np, struct scsi_cmnd *cmd) +{ +/* struct scsi_device *device = cmd->device; */ + struct ccb *cp; + int found; + int retv; + +/* + * First, look for the scsi command in the waiting list + */ + if (remove_from_waiting_list(np, cmd)) { + cmd->result = ScsiResult(DID_ABORT, 0); + ncr_queue_done_cmd(np, cmd); + return SCSI_ABORT_SUCCESS; + } + +/* + * Then, look in the wakeup list + */ + for (found=0, cp=np->ccb; cp; cp=cp->link_ccb) { + /* + ** look for the ccb of this command. + */ + if (cp->host_status == HS_IDLE) continue; + if (cp->cmd == cmd) { + found = 1; + break; + } + } + + if (!found) { + return SCSI_ABORT_NOT_RUNNING; + } + + if (np->settle_time) { + return SCSI_ABORT_SNOOZE; + } + + /* + ** If the CCB is active, patch schedule jumps for the + ** script to abort the command. + */ + + switch(cp->host_status) { + case HS_BUSY: + case HS_NEGOTIATE: + printk ("%s: abort ccb=%p (cancel)\n", ncr_name (np), cp); + cp->start.schedule.l_paddr = + cpu_to_scr(NCB_SCRIPTH_PHYS (np, cancel)); + retv = SCSI_ABORT_PENDING; + break; + case HS_DISCONNECT: + cp->restart.schedule.l_paddr = + cpu_to_scr(NCB_SCRIPTH_PHYS (np, abort)); + retv = SCSI_ABORT_PENDING; + break; + default: + retv = SCSI_ABORT_NOT_RUNNING; + break; + + } + + /* + ** If there are no requests, the script + ** processor will sleep on SEL_WAIT_RESEL. + ** Let's wake it up, since it may have to work. + */ + OUTB (nc_istat, SIGP); + + return retv; +} +#endif + +static void ncr_detach(struct ncb *np) +{ + struct ccb *cp; + struct tcb *tp; + struct lcb *lp; + int target, lun; + int i; + char inst_name[16]; + + /* Local copy so we don't access np after freeing it! */ + strlcpy(inst_name, ncr_name(np), sizeof(inst_name)); + + printk("%s: releasing host resources\n", ncr_name(np)); + +/* +** Stop the ncr_timeout process +** Set release_stage to 1 and wait that ncr_timeout() set it to 2. +*/ + +#ifdef DEBUG_NCR53C8XX + printk("%s: stopping the timer\n", ncr_name(np)); +#endif + np->release_stage = 1; + for (i = 50 ; i && np->release_stage != 2 ; i--) + mdelay(100); + if (np->release_stage != 2) + printk("%s: the timer seems to be already stopped\n", ncr_name(np)); + else np->release_stage = 2; + +/* +** Disable chip interrupts +*/ + +#ifdef DEBUG_NCR53C8XX + printk("%s: disabling chip interrupts\n", ncr_name(np)); +#endif + OUTW (nc_sien , 0); + OUTB (nc_dien , 0); + + /* + ** Reset NCR chip + ** Restore bios setting for automatic clock detection. + */ + + printk("%s: resetting chip\n", ncr_name(np)); + ncr_chip_reset(np, 100); + + OUTB(nc_dmode, np->sv_dmode); + OUTB(nc_dcntl, np->sv_dcntl); + OUTB(nc_ctest0, np->sv_ctest0); + OUTB(nc_ctest3, np->sv_ctest3); + OUTB(nc_ctest4, np->sv_ctest4); + OUTB(nc_ctest5, np->sv_ctest5); + OUTB(nc_gpcntl, np->sv_gpcntl); + OUTB(nc_stest2, np->sv_stest2); + + ncr_selectclock(np, np->sv_scntl3); + + /* + ** Free allocated ccb(s) + */ + + while ((cp=np->ccb->link_ccb) != NULL) { + np->ccb->link_ccb = cp->link_ccb; + if (cp->host_status) { + printk("%s: shall free an active ccb (host_status=%d)\n", + ncr_name(np), cp->host_status); + } +#ifdef DEBUG_NCR53C8XX + printk("%s: freeing ccb (%lx)\n", ncr_name(np), (u_long) cp); +#endif + m_free_dma(cp, sizeof(*cp), "CCB"); + } + + /* Free allocated tp(s) */ + + for (target = 0; target < MAX_TARGET ; target++) { + tp=&np->target[target]; + for (lun = 0 ; lun < MAX_LUN ; lun++) { + lp = tp->lp[lun]; + if (lp) { +#ifdef DEBUG_NCR53C8XX + printk("%s: freeing lp (%lx)\n", ncr_name(np), (u_long) lp); +#endif + if (lp->jump_ccb != &lp->jump_ccb_0) + m_free_dma(lp->jump_ccb,256,"JUMP_CCB"); + m_free_dma(lp, sizeof(*lp), "LCB"); + } + } + } + + if (np->scripth0) + m_free_dma(np->scripth0, sizeof(struct scripth), "SCRIPTH"); + if (np->script0) + m_free_dma(np->script0, sizeof(struct script), "SCRIPT"); + if (np->ccb) + m_free_dma(np->ccb, sizeof(struct ccb), "CCB"); + m_free_dma(np, sizeof(struct ncb), "NCB"); + + printk("%s: host resources successfully released\n", inst_name); +} + +/*========================================================== +** +** +** Complete execution of a SCSI command. +** Signal completion to the generic SCSI driver. +** +** +**========================================================== +*/ + +void ncr_complete (struct ncb *np, struct ccb *cp) +{ + struct scsi_cmnd *cmd; + struct tcb *tp; + struct lcb *lp; + + /* + ** Sanity check + */ + + if (!cp || cp->magic != CCB_MAGIC || !cp->cmd) + return; + + /* + ** Print minimal debug information. + */ + + if (DEBUG_FLAGS & DEBUG_TINY) + printk ("CCB=%lx STAT=%x/%x\n", (unsigned long)cp, + cp->host_status,cp->scsi_status); + + /* + ** Get command, target and lun pointers. + */ + + cmd = cp->cmd; + cp->cmd = NULL; + tp = &np->target[cmd->device->id]; + lp = tp->lp[cmd->device->lun]; + + /* + ** We donnot queue more than 1 ccb per target + ** with negotiation at any time. If this ccb was + ** used for negotiation, clear this info in the tcb. + */ + + if (cp == tp->nego_cp) + tp->nego_cp = NULL; + + /* + ** If auto-sense performed, change scsi status. + */ + if (cp->auto_sense) { + cp->scsi_status = cp->auto_sense; + } + + /* + ** If we were recovering from queue full or performing + ** auto-sense, requeue skipped CCBs to the wait queue. + */ + + if (lp && lp->held_ccb) { + if (cp == lp->held_ccb) { + list_splice_init(&lp->skip_ccbq, &lp->wait_ccbq); + lp->held_ccb = NULL; + } + } + + /* + ** Check for parity errors. + */ + + if (cp->parity_status > 1) { + PRINT_ADDR(cmd, "%d parity error(s).\n",cp->parity_status); + } + + /* + ** Check for extended errors. + */ + + if (cp->xerr_status != XE_OK) { + switch (cp->xerr_status) { + case XE_EXTRA_DATA: + PRINT_ADDR(cmd, "extraneous data discarded.\n"); + break; + case XE_BAD_PHASE: + PRINT_ADDR(cmd, "invalid scsi phase (4/5).\n"); + break; + default: + PRINT_ADDR(cmd, "extended error %d.\n", + cp->xerr_status); + break; + } + if (cp->host_status==HS_COMPLETE) + cp->host_status = HS_FAIL; + } + + /* + ** Print out any error for debugging purpose. + */ + if (DEBUG_FLAGS & (DEBUG_RESULT|DEBUG_TINY)) { + if (cp->host_status!=HS_COMPLETE || cp->scsi_status!=S_GOOD) { + PRINT_ADDR(cmd, "ERROR: cmd=%x host_status=%x " + "scsi_status=%x\n", cmd->cmnd[0], + cp->host_status, cp->scsi_status); + } + } + + /* + ** Check the status. + */ + if ( (cp->host_status == HS_COMPLETE) + && (cp->scsi_status == S_GOOD || + cp->scsi_status == S_COND_MET)) { + /* + * All went well (GOOD status). + * CONDITION MET status is returned on + * `Pre-Fetch' or `Search data' success. + */ + cmd->result = ScsiResult(DID_OK, cp->scsi_status); + + /* + ** @RESID@ + ** Could dig out the correct value for resid, + ** but it would be quite complicated. + */ + /* if (cp->phys.header.lastp != cp->phys.header.goalp) */ + + /* + ** Allocate the lcb if not yet. + */ + if (!lp) + ncr_alloc_lcb (np, cmd->device->id, cmd->device->lun); + + tp->bytes += cp->data_len; + tp->transfers ++; + + /* + ** If tags was reduced due to queue full, + ** increase tags if 1000 good status received. + */ + if (lp && lp->usetags && lp->numtags < lp->maxtags) { + ++lp->num_good; + if (lp->num_good >= 1000) { + lp->num_good = 0; + ++lp->numtags; + ncr_setup_tags (np, cmd->device); + } + } + } else if ((cp->host_status == HS_COMPLETE) + && (cp->scsi_status == S_CHECK_COND)) { + /* + ** Check condition code + */ + cmd->result = ScsiResult(DID_OK, S_CHECK_COND); + + /* + ** Copy back sense data to caller's buffer. + */ + memcpy(cmd->sense_buffer, cp->sense_buf, + min_t(size_t, SCSI_SENSE_BUFFERSIZE, + sizeof(cp->sense_buf))); + + if (DEBUG_FLAGS & (DEBUG_RESULT|DEBUG_TINY)) { + u_char *p = cmd->sense_buffer; + int i; + PRINT_ADDR(cmd, "sense data:"); + for (i=0; i<14; i++) printk (" %x", *p++); + printk (".\n"); + } + } else if ((cp->host_status == HS_COMPLETE) + && (cp->scsi_status == S_CONFLICT)) { + /* + ** Reservation Conflict condition code + */ + cmd->result = ScsiResult(DID_OK, S_CONFLICT); + + } else if ((cp->host_status == HS_COMPLETE) + && (cp->scsi_status == S_BUSY || + cp->scsi_status == S_QUEUE_FULL)) { + + /* + ** Target is busy. + */ + cmd->result = ScsiResult(DID_OK, cp->scsi_status); + + } else if ((cp->host_status == HS_SEL_TIMEOUT) + || (cp->host_status == HS_TIMEOUT)) { + + /* + ** No response + */ + cmd->result = ScsiResult(DID_TIME_OUT, cp->scsi_status); + + } else if (cp->host_status == HS_RESET) { + + /* + ** SCSI bus reset + */ + cmd->result = ScsiResult(DID_RESET, cp->scsi_status); + + } else if (cp->host_status == HS_ABORTED) { + + /* + ** Transfer aborted + */ + cmd->result = ScsiResult(DID_ABORT, cp->scsi_status); + + } else { + + /* + ** Other protocol messes + */ + PRINT_ADDR(cmd, "COMMAND FAILED (%x %x) @%p.\n", + cp->host_status, cp->scsi_status, cp); + + cmd->result = ScsiResult(DID_ERROR, cp->scsi_status); + } + + /* + ** trace output + */ + + if (tp->usrflag & UF_TRACE) { + u_char * p; + int i; + PRINT_ADDR(cmd, " CMD:"); + p = (u_char*) &cmd->cmnd[0]; + for (i=0; i<cmd->cmd_len; i++) printk (" %x", *p++); + + if (cp->host_status==HS_COMPLETE) { + switch (cp->scsi_status) { + case S_GOOD: + printk (" GOOD"); + break; + case S_CHECK_COND: + printk (" SENSE:"); + p = (u_char*) &cmd->sense_buffer; + for (i=0; i<14; i++) + printk (" %x", *p++); + break; + default: + printk (" STAT: %x\n", cp->scsi_status); + break; + } + } else printk (" HOSTERROR: %x", cp->host_status); + printk ("\n"); + } + + /* + ** Free this ccb + */ + ncr_free_ccb (np, cp); + + /* + ** requeue awaiting scsi commands for this lun. + */ + if (lp && lp->queuedccbs < lp->queuedepth && + !list_empty(&lp->wait_ccbq)) + ncr_start_next_ccb(np, lp, 2); + + /* + ** requeue awaiting scsi commands for this controller. + */ + if (np->waiting_list) + requeue_waiting_list(np); + + /* + ** signal completion to generic driver. + */ + ncr_queue_done_cmd(np, cmd); +} + +/*========================================================== +** +** +** Signal all (or one) control block done. +** +** +**========================================================== +*/ + +/* +** This CCB has been skipped by the NCR. +** Queue it in the corresponding unit queue. +*/ +static void ncr_ccb_skipped(struct ncb *np, struct ccb *cp) +{ + struct tcb *tp = &np->target[cp->target]; + struct lcb *lp = tp->lp[cp->lun]; + + if (lp && cp != np->ccb) { + cp->host_status &= ~HS_SKIPMASK; + cp->start.schedule.l_paddr = + cpu_to_scr(NCB_SCRIPT_PHYS (np, select)); + list_move_tail(&cp->link_ccbq, &lp->skip_ccbq); + if (cp->queued) { + --lp->queuedccbs; + } + } + if (cp->queued) { + --np->queuedccbs; + cp->queued = 0; + } +} + +/* +** The NCR has completed CCBs. +** Look at the DONE QUEUE if enabled, otherwise scan all CCBs +*/ +void ncr_wakeup_done (struct ncb *np) +{ + struct ccb *cp; +#ifdef SCSI_NCR_CCB_DONE_SUPPORT + int i, j; + + i = np->ccb_done_ic; + while (1) { + j = i+1; + if (j >= MAX_DONE) + j = 0; + + cp = np->ccb_done[j]; + if (!CCB_DONE_VALID(cp)) + break; + + np->ccb_done[j] = (struct ccb *)CCB_DONE_EMPTY; + np->scripth->done_queue[5*j + 4] = + cpu_to_scr(NCB_SCRIPT_PHYS (np, done_plug)); + MEMORY_BARRIER(); + np->scripth->done_queue[5*i + 4] = + cpu_to_scr(NCB_SCRIPT_PHYS (np, done_end)); + + if (cp->host_status & HS_DONEMASK) + ncr_complete (np, cp); + else if (cp->host_status & HS_SKIPMASK) + ncr_ccb_skipped (np, cp); + + i = j; + } + np->ccb_done_ic = i; +#else + cp = np->ccb; + while (cp) { + if (cp->host_status & HS_DONEMASK) + ncr_complete (np, cp); + else if (cp->host_status & HS_SKIPMASK) + ncr_ccb_skipped (np, cp); + cp = cp->link_ccb; + } +#endif +} + +/* +** Complete all active CCBs. +*/ +void ncr_wakeup (struct ncb *np, u_long code) +{ + struct ccb *cp = np->ccb; + + while (cp) { + if (cp->host_status != HS_IDLE) { + cp->host_status = code; + ncr_complete (np, cp); + } + cp = cp->link_ccb; + } +} + +/* +** Reset ncr chip. +*/ + +/* Some initialisation must be done immediately following reset, for 53c720, + * at least. EA (dcntl bit 5) isn't set here as it is set once only in + * the _detect function. + */ +static void ncr_chip_reset(struct ncb *np, int delay) +{ + OUTB (nc_istat, SRST); + udelay(delay); + OUTB (nc_istat, 0 ); + + if (np->features & FE_EHP) + OUTB (nc_ctest0, EHP); + if (np->features & FE_MUX) + OUTB (nc_ctest4, MUX); +} + + +/*========================================================== +** +** +** Start NCR chip. +** +** +**========================================================== +*/ + +void ncr_init (struct ncb *np, int reset, char * msg, u_long code) +{ + int i; + + /* + ** Reset chip if asked, otherwise just clear fifos. + */ + + if (reset) { + OUTB (nc_istat, SRST); + udelay(100); + } + else { + OUTB (nc_stest3, TE|CSF); + OUTONB (nc_ctest3, CLF); + } + + /* + ** Message. + */ + + if (msg) printk (KERN_INFO "%s: restart (%s).\n", ncr_name (np), msg); + + /* + ** Clear Start Queue + */ + np->queuedepth = MAX_START - 1; /* 1 entry needed as end marker */ + for (i = 1; i < MAX_START + MAX_START; i += 2) + np->scripth0->tryloop[i] = + cpu_to_scr(NCB_SCRIPT_PHYS (np, idle)); + + /* + ** Start at first entry. + */ + np->squeueput = 0; + np->script0->startpos[0] = cpu_to_scr(NCB_SCRIPTH_PHYS (np, tryloop)); + +#ifdef SCSI_NCR_CCB_DONE_SUPPORT + /* + ** Clear Done Queue + */ + for (i = 0; i < MAX_DONE; i++) { + np->ccb_done[i] = (struct ccb *)CCB_DONE_EMPTY; + np->scripth0->done_queue[5*i + 4] = + cpu_to_scr(NCB_SCRIPT_PHYS (np, done_end)); + } +#endif + + /* + ** Start at first entry. + */ + np->script0->done_pos[0] = cpu_to_scr(NCB_SCRIPTH_PHYS (np,done_queue)); + np->ccb_done_ic = MAX_DONE-1; + np->scripth0->done_queue[5*(MAX_DONE-1) + 4] = + cpu_to_scr(NCB_SCRIPT_PHYS (np, done_plug)); + + /* + ** Wakeup all pending jobs. + */ + ncr_wakeup (np, code); + + /* + ** Init chip. + */ + + /* + ** Remove reset; big delay because the 895 needs time for the + ** bus mode to settle + */ + ncr_chip_reset(np, 2000); + + OUTB (nc_scntl0, np->rv_scntl0 | 0xc0); + /* full arb., ena parity, par->ATN */ + OUTB (nc_scntl1, 0x00); /* odd parity, and remove CRST!! */ + + ncr_selectclock(np, np->rv_scntl3); /* Select SCSI clock */ + + OUTB (nc_scid , RRE|np->myaddr); /* Adapter SCSI address */ + OUTW (nc_respid, 1ul<<np->myaddr); /* Id to respond to */ + OUTB (nc_istat , SIGP ); /* Signal Process */ + OUTB (nc_dmode , np->rv_dmode); /* Burst length, dma mode */ + OUTB (nc_ctest5, np->rv_ctest5); /* Large fifo + large burst */ + + OUTB (nc_dcntl , NOCOM|np->rv_dcntl); /* Protect SFBR */ + OUTB (nc_ctest0, np->rv_ctest0); /* 720: CDIS and EHP */ + OUTB (nc_ctest3, np->rv_ctest3); /* Write and invalidate */ + OUTB (nc_ctest4, np->rv_ctest4); /* Master parity checking */ + + OUTB (nc_stest2, EXT|np->rv_stest2); /* Extended Sreq/Sack filtering */ + OUTB (nc_stest3, TE); /* TolerANT enable */ + OUTB (nc_stime0, 0x0c ); /* HTH disabled STO 0.25 sec */ + + /* + ** Disable disconnects. + */ + + np->disc = 0; + + /* + ** Enable GPIO0 pin for writing if LED support. + */ + + if (np->features & FE_LED0) { + OUTOFFB (nc_gpcntl, 0x01); + } + + /* + ** enable ints + */ + + OUTW (nc_sien , STO|HTH|MA|SGE|UDC|RST|PAR); + OUTB (nc_dien , MDPE|BF|ABRT|SSI|SIR|IID); + + /* + ** Fill in target structure. + ** Reinitialize usrsync. + ** Reinitialize usrwide. + ** Prepare sync negotiation according to actual SCSI bus mode. + */ + + for (i=0;i<MAX_TARGET;i++) { + struct tcb *tp = &np->target[i]; + + tp->sval = 0; + tp->wval = np->rv_scntl3; + + if (tp->usrsync != 255) { + if (tp->usrsync <= np->maxsync) { + if (tp->usrsync < np->minsync) { + tp->usrsync = np->minsync; + } + } + else + tp->usrsync = 255; + } + + if (tp->usrwide > np->maxwide) + tp->usrwide = np->maxwide; + + } + + /* + ** Start script processor. + */ + if (np->paddr2) { + if (bootverbose) + printk ("%s: Downloading SCSI SCRIPTS.\n", + ncr_name(np)); + OUTL (nc_scratcha, vtobus(np->script0)); + OUTL_DSP (NCB_SCRIPTH_PHYS (np, start_ram)); + } + else + OUTL_DSP (NCB_SCRIPT_PHYS (np, start)); +} + +/*========================================================== +** +** Prepare the negotiation values for wide and +** synchronous transfers. +** +**========================================================== +*/ + +static void ncr_negotiate (struct ncb* np, struct tcb* tp) +{ + /* + ** minsync unit is 4ns ! + */ + + u_long minsync = tp->usrsync; + + /* + ** SCSI bus mode limit + */ + + if (np->scsi_mode && np->scsi_mode == SMODE_SE) { + if (minsync < 12) minsync = 12; + } + + /* + ** our limit .. + */ + + if (minsync < np->minsync) + minsync = np->minsync; + + /* + ** divider limit + */ + + if (minsync > np->maxsync) + minsync = 255; + + if (tp->maxoffs > np->maxoffs) + tp->maxoffs = np->maxoffs; + + tp->minsync = minsync; + tp->maxoffs = (minsync<255 ? tp->maxoffs : 0); + + /* + ** period=0: has to negotiate sync transfer + */ + + tp->period=0; + + /* + ** widedone=0: has to negotiate wide transfer + */ + tp->widedone=0; +} + +/*========================================================== +** +** Get clock factor and sync divisor for a given +** synchronous factor period. +** Returns the clock factor (in sxfer) and scntl3 +** synchronous divisor field. +** +**========================================================== +*/ + +static void ncr_getsync(struct ncb *np, u_char sfac, u_char *fakp, u_char *scntl3p) +{ + u_long clk = np->clock_khz; /* SCSI clock frequency in kHz */ + int div = np->clock_divn; /* Number of divisors supported */ + u_long fak; /* Sync factor in sxfer */ + u_long per; /* Period in tenths of ns */ + u_long kpc; /* (per * clk) */ + + /* + ** Compute the synchronous period in tenths of nano-seconds + */ + if (sfac <= 10) per = 250; + else if (sfac == 11) per = 303; + else if (sfac == 12) per = 500; + else per = 40 * sfac; + + /* + ** Look for the greatest clock divisor that allows an + ** input speed faster than the period. + */ + kpc = per * clk; + while (--div > 0) + if (kpc >= (div_10M[div] << 2)) break; + + /* + ** Calculate the lowest clock factor that allows an output + ** speed not faster than the period. + */ + fak = (kpc - 1) / div_10M[div] + 1; + +#if 0 /* This optimization does not seem very useful */ + + per = (fak * div_10M[div]) / clk; + + /* + ** Why not to try the immediate lower divisor and to choose + ** the one that allows the fastest output speed ? + ** We don't want input speed too much greater than output speed. + */ + if (div >= 1 && fak < 8) { + u_long fak2, per2; + fak2 = (kpc - 1) / div_10M[div-1] + 1; + per2 = (fak2 * div_10M[div-1]) / clk; + if (per2 < per && fak2 <= 8) { + fak = fak2; + per = per2; + --div; + } + } +#endif + + if (fak < 4) fak = 4; /* Should never happen, too bad ... */ + + /* + ** Compute and return sync parameters for the ncr + */ + *fakp = fak - 4; + *scntl3p = ((div+1) << 4) + (sfac < 25 ? 0x80 : 0); +} + + +/*========================================================== +** +** Set actual values, sync status and patch all ccbs of +** a target according to new sync/wide agreement. +** +**========================================================== +*/ + +static void ncr_set_sync_wide_status (struct ncb *np, u_char target) +{ + struct ccb *cp; + struct tcb *tp = &np->target[target]; + + /* + ** set actual value and sync_status + */ + OUTB (nc_sxfer, tp->sval); + np->sync_st = tp->sval; + OUTB (nc_scntl3, tp->wval); + np->wide_st = tp->wval; + + /* + ** patch ALL ccbs of this target. + */ + for (cp = np->ccb; cp; cp = cp->link_ccb) { + if (!cp->cmd) continue; + if (scmd_id(cp->cmd) != target) continue; +#if 0 + cp->sync_status = tp->sval; + cp->wide_status = tp->wval; +#endif + cp->phys.select.sel_scntl3 = tp->wval; + cp->phys.select.sel_sxfer = tp->sval; + } +} + +/*========================================================== +** +** Switch sync mode for current job and it's target +** +**========================================================== +*/ + +static void ncr_setsync (struct ncb *np, struct ccb *cp, u_char scntl3, u_char sxfer) +{ + struct scsi_cmnd *cmd = cp->cmd; + struct tcb *tp; + u_char target = INB (nc_sdid) & 0x0f; + u_char idiv; + + BUG_ON(target != (scmd_id(cmd) & 0xf)); + + tp = &np->target[target]; + + if (!scntl3 || !(sxfer & 0x1f)) + scntl3 = np->rv_scntl3; + scntl3 = (scntl3 & 0xf0) | (tp->wval & EWS) | (np->rv_scntl3 & 0x07); + + /* + ** Deduce the value of controller sync period from scntl3. + ** period is in tenths of nano-seconds. + */ + + idiv = ((scntl3 >> 4) & 0x7); + if ((sxfer & 0x1f) && idiv) + tp->period = (((sxfer>>5)+4)*div_10M[idiv-1])/np->clock_khz; + else + tp->period = 0xffff; + + /* Stop there if sync parameters are unchanged */ + if (tp->sval == sxfer && tp->wval == scntl3) + return; + tp->sval = sxfer; + tp->wval = scntl3; + + if (sxfer & 0x01f) { + /* Disable extended Sreq/Sack filtering */ + if (tp->period <= 2000) + OUTOFFB(nc_stest2, EXT); + } + + spi_display_xfer_agreement(tp->starget); + + /* + ** set actual value and sync_status + ** patch ALL ccbs of this target. + */ + ncr_set_sync_wide_status(np, target); +} + +/*========================================================== +** +** Switch wide mode for current job and it's target +** SCSI specs say: a SCSI device that accepts a WDTR +** message shall reset the synchronous agreement to +** asynchronous mode. +** +**========================================================== +*/ + +static void ncr_setwide (struct ncb *np, struct ccb *cp, u_char wide, u_char ack) +{ + struct scsi_cmnd *cmd = cp->cmd; + u16 target = INB (nc_sdid) & 0x0f; + struct tcb *tp; + u_char scntl3; + u_char sxfer; + + BUG_ON(target != (scmd_id(cmd) & 0xf)); + + tp = &np->target[target]; + tp->widedone = wide+1; + scntl3 = (tp->wval & (~EWS)) | (wide ? EWS : 0); + + sxfer = ack ? 0 : tp->sval; + + /* + ** Stop there if sync/wide parameters are unchanged + */ + if (tp->sval == sxfer && tp->wval == scntl3) return; + tp->sval = sxfer; + tp->wval = scntl3; + + /* + ** Bells and whistles ;-) + */ + if (bootverbose >= 2) { + dev_info(&cmd->device->sdev_target->dev, "WIDE SCSI %sabled.\n", + (scntl3 & EWS) ? "en" : "dis"); + } + + /* + ** set actual value and sync_status + ** patch ALL ccbs of this target. + */ + ncr_set_sync_wide_status(np, target); +} + +/*========================================================== +** +** Switch tagged mode for a target. +** +**========================================================== +*/ + +static void ncr_setup_tags (struct ncb *np, struct scsi_device *sdev) +{ + unsigned char tn = sdev->id, ln = sdev->lun; + struct tcb *tp = &np->target[tn]; + struct lcb *lp = tp->lp[ln]; + u_char reqtags, maxdepth; + + /* + ** Just in case ... + */ + if ((!tp) || (!lp) || !sdev) + return; + + /* + ** If SCSI device queue depth is not yet set, leave here. + */ + if (!lp->scdev_depth) + return; + + /* + ** Donnot allow more tags than the SCSI driver can queue + ** for this device. + ** Donnot allow more tags than we can handle. + */ + maxdepth = lp->scdev_depth; + if (maxdepth > lp->maxnxs) maxdepth = lp->maxnxs; + if (lp->maxtags > maxdepth) lp->maxtags = maxdepth; + if (lp->numtags > maxdepth) lp->numtags = maxdepth; + + /* + ** only devices conformant to ANSI Version >= 2 + ** only devices capable of tagged commands + ** only if enabled by user .. + */ + if (sdev->tagged_supported && lp->numtags > 1) { + reqtags = lp->numtags; + } else { + reqtags = 1; + } + + /* + ** Update max number of tags + */ + lp->numtags = reqtags; + if (lp->numtags > lp->maxtags) + lp->maxtags = lp->numtags; + + /* + ** If we want to switch tag mode, we must wait + ** for no CCB to be active. + */ + if (reqtags > 1 && lp->usetags) { /* Stay in tagged mode */ + if (lp->queuedepth == reqtags) /* Already announced */ + return; + lp->queuedepth = reqtags; + } + else if (reqtags <= 1 && !lp->usetags) { /* Stay in untagged mode */ + lp->queuedepth = reqtags; + return; + } + else { /* Want to switch tag mode */ + if (lp->busyccbs) /* If not yet safe, return */ + return; + lp->queuedepth = reqtags; + lp->usetags = reqtags > 1 ? 1 : 0; + } + + /* + ** Patch the lun mini-script, according to tag mode. + */ + lp->jump_tag.l_paddr = lp->usetags? + cpu_to_scr(NCB_SCRIPT_PHYS(np, resel_tag)) : + cpu_to_scr(NCB_SCRIPT_PHYS(np, resel_notag)); + + /* + ** Announce change to user. + */ + if (bootverbose) { + if (lp->usetags) { + dev_info(&sdev->sdev_gendev, + "tagged command queue depth set to %d\n", + reqtags); + } else { + dev_info(&sdev->sdev_gendev, + "tagged command queueing disabled\n"); + } + } +} + +/*========================================================== +** +** +** ncr timeout handler. +** +** +**========================================================== +** +** Misused to keep the driver running when +** interrupts are not configured correctly. +** +**---------------------------------------------------------- +*/ + +static void ncr_timeout (struct ncb *np) +{ + u_long thistime = jiffies; + + /* + ** If release process in progress, let's go + ** Set the release stage from 1 to 2 to synchronize + ** with the release process. + */ + + if (np->release_stage) { + if (np->release_stage == 1) np->release_stage = 2; + return; + } + + np->timer.expires = jiffies + SCSI_NCR_TIMER_INTERVAL; + add_timer(&np->timer); + + /* + ** If we are resetting the ncr, wait for settle_time before + ** clearing it. Then command processing will be resumed. + */ + if (np->settle_time) { + if (np->settle_time <= thistime) { + if (bootverbose > 1) + printk("%s: command processing resumed\n", ncr_name(np)); + np->settle_time = 0; + np->disc = 1; + requeue_waiting_list(np); + } + return; + } + + /* + ** Since the generic scsi driver only allows us 0.5 second + ** to perform abort of a command, we must look at ccbs about + ** every 0.25 second. + */ + if (np->lasttime + 4*HZ < thistime) { + /* + ** block ncr interrupts + */ + np->lasttime = thistime; + } + +#ifdef SCSI_NCR_BROKEN_INTR + if (INB(nc_istat) & (INTF|SIP|DIP)) { + + /* + ** Process pending interrupts. + */ + if (DEBUG_FLAGS & DEBUG_TINY) printk ("{"); + ncr_exception (np); + if (DEBUG_FLAGS & DEBUG_TINY) printk ("}"); + } +#endif /* SCSI_NCR_BROKEN_INTR */ +} + +/*========================================================== +** +** log message for real hard errors +** +** "ncr0 targ 0?: ERROR (ds:si) (so-si-sd) (sxfer/scntl3) @ name (dsp:dbc)." +** " reg: r0 r1 r2 r3 r4 r5 r6 ..... rf." +** +** exception register: +** ds: dstat +** si: sist +** +** SCSI bus lines: +** so: control lines as driver by NCR. +** si: control lines as seen by NCR. +** sd: scsi data lines as seen by NCR. +** +** wide/fastmode: +** sxfer: (see the manual) +** scntl3: (see the manual) +** +** current script command: +** dsp: script address (relative to start of script). +** dbc: first word of script command. +** +** First 16 register of the chip: +** r0..rf +** +**========================================================== +*/ + +static void ncr_log_hard_error(struct ncb *np, u16 sist, u_char dstat) +{ + u32 dsp; + int script_ofs; + int script_size; + char *script_name; + u_char *script_base; + int i; + + dsp = INL (nc_dsp); + + if (dsp > np->p_script && dsp <= np->p_script + sizeof(struct script)) { + script_ofs = dsp - np->p_script; + script_size = sizeof(struct script); + script_base = (u_char *) np->script0; + script_name = "script"; + } + else if (np->p_scripth < dsp && + dsp <= np->p_scripth + sizeof(struct scripth)) { + script_ofs = dsp - np->p_scripth; + script_size = sizeof(struct scripth); + script_base = (u_char *) np->scripth0; + script_name = "scripth"; + } else { + script_ofs = dsp; + script_size = 0; + script_base = NULL; + script_name = "mem"; + } + + printk ("%s:%d: ERROR (%x:%x) (%x-%x-%x) (%x/%x) @ (%s %x:%08x).\n", + ncr_name (np), (unsigned)INB (nc_sdid)&0x0f, dstat, sist, + (unsigned)INB (nc_socl), (unsigned)INB (nc_sbcl), (unsigned)INB (nc_sbdl), + (unsigned)INB (nc_sxfer),(unsigned)INB (nc_scntl3), script_name, script_ofs, + (unsigned)INL (nc_dbc)); + + if (((script_ofs & 3) == 0) && + (unsigned)script_ofs < script_size) { + printk ("%s: script cmd = %08x\n", ncr_name(np), + scr_to_cpu((int) *(ncrcmd *)(script_base + script_ofs))); + } + + printk ("%s: regdump:", ncr_name(np)); + for (i=0; i<16;i++) + printk (" %02x", (unsigned)INB_OFF(i)); + printk (".\n"); +} + +/*============================================================ +** +** ncr chip exception handler. +** +**============================================================ +** +** In normal cases, interrupt conditions occur one at a +** time. The ncr is able to stack in some extra registers +** other interrupts that will occur after the first one. +** But, several interrupts may occur at the same time. +** +** We probably should only try to deal with the normal +** case, but it seems that multiple interrupts occur in +** some cases that are not abnormal at all. +** +** The most frequent interrupt condition is Phase Mismatch. +** We should want to service this interrupt quickly. +** A SCSI parity error may be delivered at the same time. +** The SIR interrupt is not very frequent in this driver, +** since the INTFLY is likely used for command completion +** signaling. +** The Selection Timeout interrupt may be triggered with +** IID and/or UDC. +** The SBMC interrupt (SCSI Bus Mode Change) may probably +** occur at any time. +** +** This handler try to deal as cleverly as possible with all +** the above. +** +**============================================================ +*/ + +void ncr_exception (struct ncb *np) +{ + u_char istat, dstat; + u16 sist; + int i; + + /* + ** interrupt on the fly ? + ** Since the global header may be copied back to a CCB + ** using a posted PCI memory write, the last operation on + ** the istat register is a READ in order to flush posted + ** PCI write commands. + */ + istat = INB (nc_istat); + if (istat & INTF) { + OUTB (nc_istat, (istat & SIGP) | INTF); + istat = INB (nc_istat); + if (DEBUG_FLAGS & DEBUG_TINY) printk ("F "); + ncr_wakeup_done (np); + } + + if (!(istat & (SIP|DIP))) + return; + + if (istat & CABRT) + OUTB (nc_istat, CABRT); + + /* + ** Steinbach's Guideline for Systems Programming: + ** Never test for an error condition you don't know how to handle. + */ + + sist = (istat & SIP) ? INW (nc_sist) : 0; + dstat = (istat & DIP) ? INB (nc_dstat) : 0; + + if (DEBUG_FLAGS & DEBUG_TINY) + printk ("<%d|%x:%x|%x:%x>", + (int)INB(nc_scr0), + dstat,sist, + (unsigned)INL(nc_dsp), + (unsigned)INL(nc_dbc)); + + /*======================================================== + ** First, interrupts we want to service cleanly. + ** + ** Phase mismatch is the most frequent interrupt, and + ** so we have to service it as quickly and as cleanly + ** as possible. + ** Programmed interrupts are rarely used in this driver, + ** but we must handle them cleanly anyway. + ** We try to deal with PAR and SBMC combined with + ** some other interrupt(s). + **========================================================= + */ + + if (!(sist & (STO|GEN|HTH|SGE|UDC|RST)) && + !(dstat & (MDPE|BF|ABRT|IID))) { + if ((sist & SBMC) && ncr_int_sbmc (np)) + return; + if ((sist & PAR) && ncr_int_par (np)) + return; + if (sist & MA) { + ncr_int_ma (np); + return; + } + if (dstat & SIR) { + ncr_int_sir (np); + return; + } + /* + ** DEL 397 - 53C875 Rev 3 - Part Number 609-0392410 - ITEM 2. + */ + if (!(sist & (SBMC|PAR)) && !(dstat & SSI)) { + printk( "%s: unknown interrupt(s) ignored, " + "ISTAT=%x DSTAT=%x SIST=%x\n", + ncr_name(np), istat, dstat, sist); + return; + } + OUTONB_STD (); + return; + } + + /*======================================================== + ** Now, interrupts that need some fixing up. + ** Order and multiple interrupts is so less important. + ** + ** If SRST has been asserted, we just reset the chip. + ** + ** Selection is intirely handled by the chip. If the + ** chip says STO, we trust it. Seems some other + ** interrupts may occur at the same time (UDC, IID), so + ** we ignore them. In any case we do enough fix-up + ** in the service routine. + ** We just exclude some fatal dma errors. + **========================================================= + */ + + if (sist & RST) { + ncr_init (np, 1, bootverbose ? "scsi reset" : NULL, HS_RESET); + return; + } + + if ((sist & STO) && + !(dstat & (MDPE|BF|ABRT))) { + /* + ** DEL 397 - 53C875 Rev 3 - Part Number 609-0392410 - ITEM 1. + */ + OUTONB (nc_ctest3, CLF); + + ncr_int_sto (np); + return; + } + + /*========================================================= + ** Now, interrupts we are not able to recover cleanly. + ** (At least for the moment). + ** + ** Do the register dump. + ** Log message for real hard errors. + ** Clear all fifos. + ** For MDPE, BF, ABORT, IID, SGE and HTH we reset the + ** BUS and the chip. + ** We are more soft for UDC. + **========================================================= + */ + + if (time_after(jiffies, np->regtime)) { + np->regtime = jiffies + 10*HZ; + for (i = 0; i<sizeof(np->regdump); i++) + ((char*)&np->regdump)[i] = INB_OFF(i); + np->regdump.nc_dstat = dstat; + np->regdump.nc_sist = sist; + } + + ncr_log_hard_error(np, sist, dstat); + + printk ("%s: have to clear fifos.\n", ncr_name (np)); + OUTB (nc_stest3, TE|CSF); + OUTONB (nc_ctest3, CLF); + + if ((sist & (SGE)) || + (dstat & (MDPE|BF|ABRT|IID))) { + ncr_start_reset(np); + return; + } + + if (sist & HTH) { + printk ("%s: handshake timeout\n", ncr_name(np)); + ncr_start_reset(np); + return; + } + + if (sist & UDC) { + printk ("%s: unexpected disconnect\n", ncr_name(np)); + OUTB (HS_PRT, HS_UNEXPECTED); + OUTL_DSP (NCB_SCRIPT_PHYS (np, cleanup)); + return; + } + + /*========================================================= + ** We just miss the cause of the interrupt. :( + ** Print a message. The timeout will do the real work. + **========================================================= + */ + printk ("%s: unknown interrupt\n", ncr_name(np)); +} + +/*========================================================== +** +** ncr chip exception handler for selection timeout +** +**========================================================== +** +** There seems to be a bug in the 53c810. +** Although a STO-Interrupt is pending, +** it continues executing script commands. +** But it will fail and interrupt (IID) on +** the next instruction where it's looking +** for a valid phase. +** +**---------------------------------------------------------- +*/ + +void ncr_int_sto (struct ncb *np) +{ + u_long dsa; + struct ccb *cp; + if (DEBUG_FLAGS & DEBUG_TINY) printk ("T"); + + /* + ** look for ccb and set the status. + */ + + dsa = INL (nc_dsa); + cp = np->ccb; + while (cp && (CCB_PHYS (cp, phys) != dsa)) + cp = cp->link_ccb; + + if (cp) { + cp-> host_status = HS_SEL_TIMEOUT; + ncr_complete (np, cp); + } + + /* + ** repair start queue and jump to start point. + */ + + OUTL_DSP (NCB_SCRIPTH_PHYS (np, sto_restart)); + return; +} + +/*========================================================== +** +** ncr chip exception handler for SCSI bus mode change +** +**========================================================== +** +** spi2-r12 11.2.3 says a transceiver mode change must +** generate a reset event and a device that detects a reset +** event shall initiate a hard reset. It says also that a +** device that detects a mode change shall set data transfer +** mode to eight bit asynchronous, etc... +** So, just resetting should be enough. +** +** +**---------------------------------------------------------- +*/ + +static int ncr_int_sbmc (struct ncb *np) +{ + u_char scsi_mode = INB (nc_stest4) & SMODE; + + if (scsi_mode != np->scsi_mode) { + printk("%s: SCSI bus mode change from %x to %x.\n", + ncr_name(np), np->scsi_mode, scsi_mode); + + np->scsi_mode = scsi_mode; + + + /* + ** Suspend command processing for 1 second and + ** reinitialize all except the chip. + */ + np->settle_time = jiffies + HZ; + ncr_init (np, 0, bootverbose ? "scsi mode change" : NULL, HS_RESET); + return 1; + } + return 0; +} + +/*========================================================== +** +** ncr chip exception handler for SCSI parity error. +** +**========================================================== +** +** +**---------------------------------------------------------- +*/ + +static int ncr_int_par (struct ncb *np) +{ + u_char hsts = INB (HS_PRT); + u32 dbc = INL (nc_dbc); + u_char sstat1 = INB (nc_sstat1); + int phase = -1; + int msg = -1; + u32 jmp; + + printk("%s: SCSI parity error detected: SCR1=%d DBC=%x SSTAT1=%x\n", + ncr_name(np), hsts, dbc, sstat1); + + /* + * Ignore the interrupt if the NCR is not connected + * to the SCSI bus, since the right work should have + * been done on unexpected disconnection handling. + */ + if (!(INB (nc_scntl1) & ISCON)) + return 0; + + /* + * If the nexus is not clearly identified, reset the bus. + * We will try to do better later. + */ + if (hsts & HS_INVALMASK) + goto reset_all; + + /* + * If the SCSI parity error occurs in MSG IN phase, prepare a + * MSG PARITY message. Otherwise, prepare a INITIATOR DETECTED + * ERROR message and let the device decide to retry the command + * or to terminate with check condition. If we were in MSG IN + * phase waiting for the response of a negotiation, we will + * get SIR_NEGO_FAILED at dispatch. + */ + if (!(dbc & 0xc0000000)) + phase = (dbc >> 24) & 7; + if (phase == 7) + msg = MSG_PARITY_ERROR; + else + msg = INITIATOR_ERROR; + + + /* + * If the NCR stopped on a MOVE ^ DATA_IN, we jump to a + * script that will ignore all data in bytes until phase + * change, since we are not sure the chip will wait the phase + * change prior to delivering the interrupt. + */ + if (phase == 1) + jmp = NCB_SCRIPTH_PHYS (np, par_err_data_in); + else + jmp = NCB_SCRIPTH_PHYS (np, par_err_other); + + OUTONB (nc_ctest3, CLF ); /* clear dma fifo */ + OUTB (nc_stest3, TE|CSF); /* clear scsi fifo */ + + np->msgout[0] = msg; + OUTL_DSP (jmp); + return 1; + +reset_all: + ncr_start_reset(np); + return 1; +} + +/*========================================================== +** +** +** ncr chip exception handler for phase errors. +** +** +**========================================================== +** +** We have to construct a new transfer descriptor, +** to transfer the rest of the current block. +** +**---------------------------------------------------------- +*/ + +static void ncr_int_ma (struct ncb *np) +{ + u32 dbc; + u32 rest; + u32 dsp; + u32 dsa; + u32 nxtdsp; + u32 newtmp; + u32 *vdsp; + u32 oadr, olen; + u32 *tblp; + ncrcmd *newcmd; + u_char cmd, sbcl; + struct ccb *cp; + + dsp = INL (nc_dsp); + dbc = INL (nc_dbc); + sbcl = INB (nc_sbcl); + + cmd = dbc >> 24; + rest = dbc & 0xffffff; + + /* + ** Take into account dma fifo and various buffers and latches, + ** only if the interrupted phase is an OUTPUT phase. + */ + + if ((cmd & 1) == 0) { + u_char ctest5, ss0, ss2; + u16 delta; + + ctest5 = (np->rv_ctest5 & DFS) ? INB (nc_ctest5) : 0; + if (ctest5 & DFS) + delta=(((ctest5 << 8) | (INB (nc_dfifo) & 0xff)) - rest) & 0x3ff; + else + delta=(INB (nc_dfifo) - rest) & 0x7f; + + /* + ** The data in the dma fifo has not been transferred to + ** the target -> add the amount to the rest + ** and clear the data. + ** Check the sstat2 register in case of wide transfer. + */ + + rest += delta; + ss0 = INB (nc_sstat0); + if (ss0 & OLF) rest++; + if (ss0 & ORF) rest++; + if (INB(nc_scntl3) & EWS) { + ss2 = INB (nc_sstat2); + if (ss2 & OLF1) rest++; + if (ss2 & ORF1) rest++; + } + + if (DEBUG_FLAGS & (DEBUG_TINY|DEBUG_PHASE)) + printk ("P%x%x RL=%d D=%d SS0=%x ", cmd&7, sbcl&7, + (unsigned) rest, (unsigned) delta, ss0); + + } else { + if (DEBUG_FLAGS & (DEBUG_TINY|DEBUG_PHASE)) + printk ("P%x%x RL=%d ", cmd&7, sbcl&7, rest); + } + + /* + ** Clear fifos. + */ + OUTONB (nc_ctest3, CLF ); /* clear dma fifo */ + OUTB (nc_stest3, TE|CSF); /* clear scsi fifo */ + + /* + ** locate matching cp. + ** if the interrupted phase is DATA IN or DATA OUT, + ** trust the global header. + */ + dsa = INL (nc_dsa); + if (!(cmd & 6)) { + cp = np->header.cp; + if (CCB_PHYS(cp, phys) != dsa) + cp = NULL; + } else { + cp = np->ccb; + while (cp && (CCB_PHYS (cp, phys) != dsa)) + cp = cp->link_ccb; + } + + /* + ** try to find the interrupted script command, + ** and the address at which to continue. + */ + vdsp = NULL; + nxtdsp = 0; + if (dsp > np->p_script && + dsp <= np->p_script + sizeof(struct script)) { + vdsp = (u32 *)((char*)np->script0 + (dsp-np->p_script-8)); + nxtdsp = dsp; + } + else if (dsp > np->p_scripth && + dsp <= np->p_scripth + sizeof(struct scripth)) { + vdsp = (u32 *)((char*)np->scripth0 + (dsp-np->p_scripth-8)); + nxtdsp = dsp; + } + else if (cp) { + if (dsp == CCB_PHYS (cp, patch[2])) { + vdsp = &cp->patch[0]; + nxtdsp = scr_to_cpu(vdsp[3]); + } + else if (dsp == CCB_PHYS (cp, patch[6])) { + vdsp = &cp->patch[4]; + nxtdsp = scr_to_cpu(vdsp[3]); + } + } + + /* + ** log the information + */ + + if (DEBUG_FLAGS & DEBUG_PHASE) { + printk ("\nCP=%p CP2=%p DSP=%x NXT=%x VDSP=%p CMD=%x ", + cp, np->header.cp, + (unsigned)dsp, + (unsigned)nxtdsp, vdsp, cmd); + } + + /* + ** cp=0 means that the DSA does not point to a valid control + ** block. This should not happen since we donnot use multi-byte + ** move while we are being reselected ot after command complete. + ** We are not able to recover from such a phase error. + */ + if (!cp) { + printk ("%s: SCSI phase error fixup: " + "CCB already dequeued (0x%08lx)\n", + ncr_name (np), (u_long) np->header.cp); + goto reset_all; + } + + /* + ** get old startaddress and old length. + */ + + oadr = scr_to_cpu(vdsp[1]); + + if (cmd & 0x10) { /* Table indirect */ + tblp = (u32 *) ((char*) &cp->phys + oadr); + olen = scr_to_cpu(tblp[0]); + oadr = scr_to_cpu(tblp[1]); + } else { + tblp = (u32 *) 0; + olen = scr_to_cpu(vdsp[0]) & 0xffffff; + } + + if (DEBUG_FLAGS & DEBUG_PHASE) { + printk ("OCMD=%x\nTBLP=%p OLEN=%x OADR=%x\n", + (unsigned) (scr_to_cpu(vdsp[0]) >> 24), + tblp, + (unsigned) olen, + (unsigned) oadr); + } + + /* + ** check cmd against assumed interrupted script command. + */ + + if (cmd != (scr_to_cpu(vdsp[0]) >> 24)) { + PRINT_ADDR(cp->cmd, "internal error: cmd=%02x != %02x=(vdsp[0] " + ">> 24)\n", cmd, scr_to_cpu(vdsp[0]) >> 24); + + goto reset_all; + } + + /* + ** cp != np->header.cp means that the header of the CCB + ** currently being processed has not yet been copied to + ** the global header area. That may happen if the device did + ** not accept all our messages after having been selected. + */ + if (cp != np->header.cp) { + printk ("%s: SCSI phase error fixup: " + "CCB address mismatch (0x%08lx != 0x%08lx)\n", + ncr_name (np), (u_long) cp, (u_long) np->header.cp); + } + + /* + ** if old phase not dataphase, leave here. + */ + + if (cmd & 0x06) { + PRINT_ADDR(cp->cmd, "phase change %x-%x %d@%08x resid=%d.\n", + cmd&7, sbcl&7, (unsigned)olen, + (unsigned)oadr, (unsigned)rest); + goto unexpected_phase; + } + + /* + ** choose the correct patch area. + ** if savep points to one, choose the other. + */ + + newcmd = cp->patch; + newtmp = CCB_PHYS (cp, patch); + if (newtmp == scr_to_cpu(cp->phys.header.savep)) { + newcmd = &cp->patch[4]; + newtmp = CCB_PHYS (cp, patch[4]); + } + + /* + ** fillin the commands + */ + + newcmd[0] = cpu_to_scr(((cmd & 0x0f) << 24) | rest); + newcmd[1] = cpu_to_scr(oadr + olen - rest); + newcmd[2] = cpu_to_scr(SCR_JUMP); + newcmd[3] = cpu_to_scr(nxtdsp); + + if (DEBUG_FLAGS & DEBUG_PHASE) { + PRINT_ADDR(cp->cmd, "newcmd[%d] %x %x %x %x.\n", + (int) (newcmd - cp->patch), + (unsigned)scr_to_cpu(newcmd[0]), + (unsigned)scr_to_cpu(newcmd[1]), + (unsigned)scr_to_cpu(newcmd[2]), + (unsigned)scr_to_cpu(newcmd[3])); + } + /* + ** fake the return address (to the patch). + ** and restart script processor at dispatcher. + */ + OUTL (nc_temp, newtmp); + OUTL_DSP (NCB_SCRIPT_PHYS (np, dispatch)); + return; + + /* + ** Unexpected phase changes that occurs when the current phase + ** is not a DATA IN or DATA OUT phase are due to error conditions. + ** Such event may only happen when the SCRIPTS is using a + ** multibyte SCSI MOVE. + ** + ** Phase change Some possible cause + ** + ** COMMAND --> MSG IN SCSI parity error detected by target. + ** COMMAND --> STATUS Bad command or refused by target. + ** MSG OUT --> MSG IN Message rejected by target. + ** MSG OUT --> COMMAND Bogus target that discards extended + ** negotiation messages. + ** + ** The code below does not care of the new phase and so + ** trusts the target. Why to annoy it ? + ** If the interrupted phase is COMMAND phase, we restart at + ** dispatcher. + ** If a target does not get all the messages after selection, + ** the code assumes blindly that the target discards extended + ** messages and clears the negotiation status. + ** If the target does not want all our response to negotiation, + ** we force a SIR_NEGO_PROTO interrupt (it is a hack that avoids + ** bloat for such a should_not_happen situation). + ** In all other situation, we reset the BUS. + ** Are these assumptions reasonable ? (Wait and see ...) + */ +unexpected_phase: + dsp -= 8; + nxtdsp = 0; + + switch (cmd & 7) { + case 2: /* COMMAND phase */ + nxtdsp = NCB_SCRIPT_PHYS (np, dispatch); + break; +#if 0 + case 3: /* STATUS phase */ + nxtdsp = NCB_SCRIPT_PHYS (np, dispatch); + break; +#endif + case 6: /* MSG OUT phase */ + np->scripth->nxtdsp_go_on[0] = cpu_to_scr(dsp + 8); + if (dsp == NCB_SCRIPT_PHYS (np, send_ident)) { + cp->host_status = HS_BUSY; + nxtdsp = NCB_SCRIPTH_PHYS (np, clratn_go_on); + } + else if (dsp == NCB_SCRIPTH_PHYS (np, send_wdtr) || + dsp == NCB_SCRIPTH_PHYS (np, send_sdtr)) { + nxtdsp = NCB_SCRIPTH_PHYS (np, nego_bad_phase); + } + break; +#if 0 + case 7: /* MSG IN phase */ + nxtdsp = NCB_SCRIPT_PHYS (np, clrack); + break; +#endif + } + + if (nxtdsp) { + OUTL_DSP (nxtdsp); + return; + } + +reset_all: + ncr_start_reset(np); +} + + +static void ncr_sir_to_redo(struct ncb *np, int num, struct ccb *cp) +{ + struct scsi_cmnd *cmd = cp->cmd; + struct tcb *tp = &np->target[cmd->device->id]; + struct lcb *lp = tp->lp[cmd->device->lun]; + struct list_head *qp; + struct ccb * cp2; + int disc_cnt = 0; + int busy_cnt = 0; + u32 startp; + u_char s_status = INB (SS_PRT); + + /* + ** Let the SCRIPTS processor skip all not yet started CCBs, + ** and count disconnected CCBs. Since the busy queue is in + ** the same order as the chip start queue, disconnected CCBs + ** are before cp and busy ones after. + */ + if (lp) { + qp = lp->busy_ccbq.prev; + while (qp != &lp->busy_ccbq) { + cp2 = list_entry(qp, struct ccb, link_ccbq); + qp = qp->prev; + ++busy_cnt; + if (cp2 == cp) + break; + cp2->start.schedule.l_paddr = + cpu_to_scr(NCB_SCRIPTH_PHYS (np, skip)); + } + lp->held_ccb = cp; /* Requeue when this one completes */ + disc_cnt = lp->queuedccbs - busy_cnt; + } + + switch(s_status) { + default: /* Just for safety, should never happen */ + case S_QUEUE_FULL: + /* + ** Decrease number of tags to the number of + ** disconnected commands. + */ + if (!lp) + goto out; + if (bootverbose >= 1) { + PRINT_ADDR(cmd, "QUEUE FULL! %d busy, %d disconnected " + "CCBs\n", busy_cnt, disc_cnt); + } + if (disc_cnt < lp->numtags) { + lp->numtags = disc_cnt > 2 ? disc_cnt : 2; + lp->num_good = 0; + ncr_setup_tags (np, cmd->device); + } + /* + ** Requeue the command to the start queue. + ** If any disconnected commands, + ** Clear SIGP. + ** Jump to reselect. + */ + cp->phys.header.savep = cp->startp; + cp->host_status = HS_BUSY; + cp->scsi_status = S_ILLEGAL; + + ncr_put_start_queue(np, cp); + if (disc_cnt) + INB (nc_ctest2); /* Clear SIGP */ + OUTL_DSP (NCB_SCRIPT_PHYS (np, reselect)); + return; + case S_TERMINATED: + case S_CHECK_COND: + /* + ** If we were requesting sense, give up. + */ + if (cp->auto_sense) + goto out; + + /* + ** Device returned CHECK CONDITION status. + ** Prepare all needed data strutures for getting + ** sense data. + ** + ** identify message + */ + cp->scsi_smsg2[0] = IDENTIFY(0, cmd->device->lun); + cp->phys.smsg.addr = cpu_to_scr(CCB_PHYS (cp, scsi_smsg2)); + cp->phys.smsg.size = cpu_to_scr(1); + + /* + ** sense command + */ + cp->phys.cmd.addr = cpu_to_scr(CCB_PHYS (cp, sensecmd)); + cp->phys.cmd.size = cpu_to_scr(6); + + /* + ** patch requested size into sense command + */ + cp->sensecmd[0] = 0x03; + cp->sensecmd[1] = (cmd->device->lun & 0x7) << 5; + cp->sensecmd[4] = sizeof(cp->sense_buf); + + /* + ** sense data + */ + memset(cp->sense_buf, 0, sizeof(cp->sense_buf)); + cp->phys.sense.addr = cpu_to_scr(CCB_PHYS(cp,sense_buf[0])); + cp->phys.sense.size = cpu_to_scr(sizeof(cp->sense_buf)); + + /* + ** requeue the command. + */ + startp = cpu_to_scr(NCB_SCRIPTH_PHYS (np, sdata_in)); + + cp->phys.header.savep = startp; + cp->phys.header.goalp = startp + 24; + cp->phys.header.lastp = startp; + cp->phys.header.wgoalp = startp + 24; + cp->phys.header.wlastp = startp; + + cp->host_status = HS_BUSY; + cp->scsi_status = S_ILLEGAL; + cp->auto_sense = s_status; + + cp->start.schedule.l_paddr = + cpu_to_scr(NCB_SCRIPT_PHYS (np, select)); + + /* + ** Select without ATN for quirky devices. + */ + if (cmd->device->select_no_atn) + cp->start.schedule.l_paddr = + cpu_to_scr(NCB_SCRIPTH_PHYS (np, select_no_atn)); + + ncr_put_start_queue(np, cp); + + OUTL_DSP (NCB_SCRIPT_PHYS (np, start)); + return; + } + +out: + OUTONB_STD (); + return; +} + + +/*========================================================== +** +** +** ncr chip exception handler for programmed interrupts. +** +** +**========================================================== +*/ + +void ncr_int_sir (struct ncb *np) +{ + u_char scntl3; + u_char chg, ofs, per, fak, wide; + u_char num = INB (nc_dsps); + struct ccb *cp=NULL; + u_long dsa = INL (nc_dsa); + u_char target = INB (nc_sdid) & 0x0f; + struct tcb *tp = &np->target[target]; + struct scsi_target *starget = tp->starget; + + if (DEBUG_FLAGS & DEBUG_TINY) printk ("I#%d", num); + + switch (num) { + case SIR_INTFLY: + /* + ** This is used for HP Zalon/53c720 where INTFLY + ** operation is currently broken. + */ + ncr_wakeup_done(np); +#ifdef SCSI_NCR_CCB_DONE_SUPPORT + OUTL(nc_dsp, NCB_SCRIPT_PHYS (np, done_end) + 8); +#else + OUTL(nc_dsp, NCB_SCRIPT_PHYS (np, start)); +#endif + return; + case SIR_RESEL_NO_MSG_IN: + case SIR_RESEL_NO_IDENTIFY: + /* + ** If devices reselecting without sending an IDENTIFY + ** message still exist, this should help. + ** We just assume lun=0, 1 CCB, no tag. + */ + if (tp->lp[0]) { + OUTL_DSP (scr_to_cpu(tp->lp[0]->jump_ccb[0])); + return; + } + case SIR_RESEL_BAD_TARGET: /* Will send a TARGET RESET message */ + case SIR_RESEL_BAD_LUN: /* Will send a TARGET RESET message */ + case SIR_RESEL_BAD_I_T_L_Q: /* Will send an ABORT TAG message */ + case SIR_RESEL_BAD_I_T_L: /* Will send an ABORT message */ + printk ("%s:%d: SIR %d, " + "incorrect nexus identification on reselection\n", + ncr_name (np), target, num); + goto out; + case SIR_DONE_OVERFLOW: + printk ("%s:%d: SIR %d, " + "CCB done queue overflow\n", + ncr_name (np), target, num); + goto out; + case SIR_BAD_STATUS: + cp = np->header.cp; + if (!cp || CCB_PHYS (cp, phys) != dsa) + goto out; + ncr_sir_to_redo(np, num, cp); + return; + default: + /* + ** lookup the ccb + */ + cp = np->ccb; + while (cp && (CCB_PHYS (cp, phys) != dsa)) + cp = cp->link_ccb; + + BUG_ON(!cp); + BUG_ON(cp != np->header.cp); + + if (!cp || cp != np->header.cp) + goto out; + } + + switch (num) { +/*----------------------------------------------------------------------------- +** +** Was Sie schon immer ueber transfermode negotiation wissen wollten ... +** ("Everything you've always wanted to know about transfer mode +** negotiation") +** +** We try to negotiate sync and wide transfer only after +** a successful inquire command. We look at byte 7 of the +** inquire data to determine the capabilities of the target. +** +** When we try to negotiate, we append the negotiation message +** to the identify and (maybe) simple tag message. +** The host status field is set to HS_NEGOTIATE to mark this +** situation. +** +** If the target doesn't answer this message immediately +** (as required by the standard), the SIR_NEGO_FAIL interrupt +** will be raised eventually. +** The handler removes the HS_NEGOTIATE status, and sets the +** negotiated value to the default (async / nowide). +** +** If we receive a matching answer immediately, we check it +** for validity, and set the values. +** +** If we receive a Reject message immediately, we assume the +** negotiation has failed, and fall back to standard values. +** +** If we receive a negotiation message while not in HS_NEGOTIATE +** state, it's a target initiated negotiation. We prepare a +** (hopefully) valid answer, set our parameters, and send back +** this answer to the target. +** +** If the target doesn't fetch the answer (no message out phase), +** we assume the negotiation has failed, and fall back to default +** settings. +** +** When we set the values, we adjust them in all ccbs belonging +** to this target, in the controller's register, and in the "phys" +** field of the controller's struct ncb. +** +** Possible cases: hs sir msg_in value send goto +** We try to negotiate: +** -> target doesn't msgin NEG FAIL noop defa. - dispatch +** -> target rejected our msg NEG FAIL reject defa. - dispatch +** -> target answered (ok) NEG SYNC sdtr set - clrack +** -> target answered (!ok) NEG SYNC sdtr defa. REJ--->msg_bad +** -> target answered (ok) NEG WIDE wdtr set - clrack +** -> target answered (!ok) NEG WIDE wdtr defa. REJ--->msg_bad +** -> any other msgin NEG FAIL noop defa. - dispatch +** +** Target tries to negotiate: +** -> incoming message --- SYNC sdtr set SDTR - +** -> incoming message --- WIDE wdtr set WDTR - +** We sent our answer: +** -> target doesn't msgout --- PROTO ? defa. - dispatch +** +**----------------------------------------------------------------------------- +*/ + + case SIR_NEGO_FAILED: + /*------------------------------------------------------- + ** + ** Negotiation failed. + ** Target doesn't send an answer message, + ** or target rejected our message. + ** + ** Remove negotiation request. + ** + **------------------------------------------------------- + */ + OUTB (HS_PRT, HS_BUSY); + + /* fall through */ + + case SIR_NEGO_PROTO: + /*------------------------------------------------------- + ** + ** Negotiation failed. + ** Target doesn't fetch the answer message. + ** + **------------------------------------------------------- + */ + + if (DEBUG_FLAGS & DEBUG_NEGO) { + PRINT_ADDR(cp->cmd, "negotiation failed sir=%x " + "status=%x.\n", num, cp->nego_status); + } + + /* + ** any error in negotiation: + ** fall back to default mode. + */ + switch (cp->nego_status) { + + case NS_SYNC: + spi_period(starget) = 0; + spi_offset(starget) = 0; + ncr_setsync (np, cp, 0, 0xe0); + break; + + case NS_WIDE: + spi_width(starget) = 0; + ncr_setwide (np, cp, 0, 0); + break; + + } + np->msgin [0] = NOP; + np->msgout[0] = NOP; + cp->nego_status = 0; + break; + + case SIR_NEGO_SYNC: + if (DEBUG_FLAGS & DEBUG_NEGO) { + ncr_print_msg(cp, "sync msgin", np->msgin); + } + + chg = 0; + per = np->msgin[3]; + ofs = np->msgin[4]; + if (ofs==0) per=255; + + /* + ** if target sends SDTR message, + ** it CAN transfer synch. + */ + + if (ofs && starget) + spi_support_sync(starget) = 1; + + /* + ** check values against driver limits. + */ + + if (per < np->minsync) + {chg = 1; per = np->minsync;} + if (per < tp->minsync) + {chg = 1; per = tp->minsync;} + if (ofs > tp->maxoffs) + {chg = 1; ofs = tp->maxoffs;} + + /* + ** Check against controller limits. + */ + fak = 7; + scntl3 = 0; + if (ofs != 0) { + ncr_getsync(np, per, &fak, &scntl3); + if (fak > 7) { + chg = 1; + ofs = 0; + } + } + if (ofs == 0) { + fak = 7; + per = 0; + scntl3 = 0; + tp->minsync = 0; + } + + if (DEBUG_FLAGS & DEBUG_NEGO) { + PRINT_ADDR(cp->cmd, "sync: per=%d scntl3=0x%x ofs=%d " + "fak=%d chg=%d.\n", per, scntl3, ofs, fak, chg); + } + + if (INB (HS_PRT) == HS_NEGOTIATE) { + OUTB (HS_PRT, HS_BUSY); + switch (cp->nego_status) { + + case NS_SYNC: + /* This was an answer message */ + if (chg) { + /* Answer wasn't acceptable. */ + spi_period(starget) = 0; + spi_offset(starget) = 0; + ncr_setsync(np, cp, 0, 0xe0); + OUTL_DSP(NCB_SCRIPT_PHYS (np, msg_bad)); + } else { + /* Answer is ok. */ + spi_period(starget) = per; + spi_offset(starget) = ofs; + ncr_setsync(np, cp, scntl3, (fak<<5)|ofs); + OUTL_DSP(NCB_SCRIPT_PHYS (np, clrack)); + } + return; + + case NS_WIDE: + spi_width(starget) = 0; + ncr_setwide(np, cp, 0, 0); + break; + } + } + + /* + ** It was a request. Set value and + ** prepare an answer message + */ + + spi_period(starget) = per; + spi_offset(starget) = ofs; + ncr_setsync(np, cp, scntl3, (fak<<5)|ofs); + + spi_populate_sync_msg(np->msgout, per, ofs); + cp->nego_status = NS_SYNC; + + if (DEBUG_FLAGS & DEBUG_NEGO) { + ncr_print_msg(cp, "sync msgout", np->msgout); + } + + if (!ofs) { + OUTL_DSP (NCB_SCRIPT_PHYS (np, msg_bad)); + return; + } + np->msgin [0] = NOP; + + break; + + case SIR_NEGO_WIDE: + /* + ** Wide request message received. + */ + if (DEBUG_FLAGS & DEBUG_NEGO) { + ncr_print_msg(cp, "wide msgin", np->msgin); + } + + /* + ** get requested values. + */ + + chg = 0; + wide = np->msgin[3]; + + /* + ** if target sends WDTR message, + ** it CAN transfer wide. + */ + + if (wide && starget) + spi_support_wide(starget) = 1; + + /* + ** check values against driver limits. + */ + + if (wide > tp->usrwide) + {chg = 1; wide = tp->usrwide;} + + if (DEBUG_FLAGS & DEBUG_NEGO) { + PRINT_ADDR(cp->cmd, "wide: wide=%d chg=%d.\n", wide, + chg); + } + + if (INB (HS_PRT) == HS_NEGOTIATE) { + OUTB (HS_PRT, HS_BUSY); + switch (cp->nego_status) { + + case NS_WIDE: + /* + ** This was an answer message + */ + if (chg) { + /* Answer wasn't acceptable. */ + spi_width(starget) = 0; + ncr_setwide(np, cp, 0, 1); + OUTL_DSP (NCB_SCRIPT_PHYS (np, msg_bad)); + } else { + /* Answer is ok. */ + spi_width(starget) = wide; + ncr_setwide(np, cp, wide, 1); + OUTL_DSP (NCB_SCRIPT_PHYS (np, clrack)); + } + return; + + case NS_SYNC: + spi_period(starget) = 0; + spi_offset(starget) = 0; + ncr_setsync(np, cp, 0, 0xe0); + break; + } + } + + /* + ** It was a request, set value and + ** prepare an answer message + */ + + spi_width(starget) = wide; + ncr_setwide(np, cp, wide, 1); + spi_populate_width_msg(np->msgout, wide); + + np->msgin [0] = NOP; + + cp->nego_status = NS_WIDE; + + if (DEBUG_FLAGS & DEBUG_NEGO) { + ncr_print_msg(cp, "wide msgout", np->msgin); + } + break; + +/*-------------------------------------------------------------------- +** +** Processing of special messages +** +**-------------------------------------------------------------------- +*/ + + case SIR_REJECT_RECEIVED: + /*----------------------------------------------- + ** + ** We received a MESSAGE_REJECT. + ** + **----------------------------------------------- + */ + + PRINT_ADDR(cp->cmd, "MESSAGE_REJECT received (%x:%x).\n", + (unsigned)scr_to_cpu(np->lastmsg), np->msgout[0]); + break; + + case SIR_REJECT_SENT: + /*----------------------------------------------- + ** + ** We received an unknown message + ** + **----------------------------------------------- + */ + + ncr_print_msg(cp, "MESSAGE_REJECT sent for", np->msgin); + break; + +/*-------------------------------------------------------------------- +** +** Processing of special messages +** +**-------------------------------------------------------------------- +*/ + + case SIR_IGN_RESIDUE: + /*----------------------------------------------- + ** + ** We received an IGNORE RESIDUE message, + ** which couldn't be handled by the script. + ** + **----------------------------------------------- + */ + + PRINT_ADDR(cp->cmd, "IGNORE_WIDE_RESIDUE received, but not yet " + "implemented.\n"); + break; +#if 0 + case SIR_MISSING_SAVE: + /*----------------------------------------------- + ** + ** We received an DISCONNECT message, + ** but the datapointer wasn't saved before. + ** + **----------------------------------------------- + */ + + PRINT_ADDR(cp->cmd, "DISCONNECT received, but datapointer " + "not saved: data=%x save=%x goal=%x.\n", + (unsigned) INL (nc_temp), + (unsigned) scr_to_cpu(np->header.savep), + (unsigned) scr_to_cpu(np->header.goalp)); + break; +#endif + } + +out: + OUTONB_STD (); +} + +/*========================================================== +** +** +** Acquire a control block +** +** +**========================================================== +*/ + +static struct ccb *ncr_get_ccb(struct ncb *np, struct scsi_cmnd *cmd) +{ + u_char tn = cmd->device->id; + u_char ln = cmd->device->lun; + struct tcb *tp = &np->target[tn]; + struct lcb *lp = tp->lp[ln]; + u_char tag = NO_TAG; + struct ccb *cp = NULL; + + /* + ** Lun structure available ? + */ + if (lp) { + struct list_head *qp; + /* + ** Keep from using more tags than we can handle. + */ + if (lp->usetags && lp->busyccbs >= lp->maxnxs) + return NULL; + + /* + ** Allocate a new CCB if needed. + */ + if (list_empty(&lp->free_ccbq)) + ncr_alloc_ccb(np, tn, ln); + + /* + ** Look for free CCB + */ + qp = ncr_list_pop(&lp->free_ccbq); + if (qp) { + cp = list_entry(qp, struct ccb, link_ccbq); + if (cp->magic) { + PRINT_ADDR(cmd, "ccb free list corrupted " + "(@%p)\n", cp); + cp = NULL; + } else { + list_add_tail(qp, &lp->wait_ccbq); + ++lp->busyccbs; + } + } + + /* + ** If a CCB is available, + ** Get a tag for this nexus if required. + */ + if (cp) { + if (lp->usetags) + tag = lp->cb_tags[lp->ia_tag]; + } + else if (lp->actccbs > 0) + return NULL; + } + + /* + ** if nothing available, take the default. + */ + if (!cp) + cp = np->ccb; + + /* + ** Wait until available. + */ +#if 0 + while (cp->magic) { + if (flags & SCSI_NOSLEEP) break; + if (tsleep ((caddr_t)cp, PRIBIO|PCATCH, "ncr", 0)) + break; + } +#endif + + if (cp->magic) + return NULL; + + cp->magic = 1; + + /* + ** Move to next available tag if tag used. + */ + if (lp) { + if (tag != NO_TAG) { + ++lp->ia_tag; + if (lp->ia_tag == MAX_TAGS) + lp->ia_tag = 0; + lp->tags_umap |= (((tagmap_t) 1) << tag); + } + } + + /* + ** Remember all informations needed to free this CCB. + */ + cp->tag = tag; + cp->target = tn; + cp->lun = ln; + + if (DEBUG_FLAGS & DEBUG_TAGS) { + PRINT_ADDR(cmd, "ccb @%p using tag %d.\n", cp, tag); + } + + return cp; +} + +/*========================================================== +** +** +** Release one control block +** +** +**========================================================== +*/ + +static void ncr_free_ccb (struct ncb *np, struct ccb *cp) +{ + struct tcb *tp = &np->target[cp->target]; + struct lcb *lp = tp->lp[cp->lun]; + + if (DEBUG_FLAGS & DEBUG_TAGS) { + PRINT_ADDR(cp->cmd, "ccb @%p freeing tag %d.\n", cp, cp->tag); + } + + /* + ** If lun control block available, + ** decrement active commands and increment credit, + ** free the tag if any and remove the JUMP for reselect. + */ + if (lp) { + if (cp->tag != NO_TAG) { + lp->cb_tags[lp->if_tag++] = cp->tag; + if (lp->if_tag == MAX_TAGS) + lp->if_tag = 0; + lp->tags_umap &= ~(((tagmap_t) 1) << cp->tag); + lp->tags_smap &= lp->tags_umap; + lp->jump_ccb[cp->tag] = + cpu_to_scr(NCB_SCRIPTH_PHYS(np, bad_i_t_l_q)); + } else { + lp->jump_ccb[0] = + cpu_to_scr(NCB_SCRIPTH_PHYS(np, bad_i_t_l)); + } + } + + /* + ** Make this CCB available. + */ + + if (lp) { + if (cp != np->ccb) + list_move(&cp->link_ccbq, &lp->free_ccbq); + --lp->busyccbs; + if (cp->queued) { + --lp->queuedccbs; + } + } + cp -> host_status = HS_IDLE; + cp -> magic = 0; + if (cp->queued) { + --np->queuedccbs; + cp->queued = 0; + } + +#if 0 + if (cp == np->ccb) + wakeup ((caddr_t) cp); +#endif +} + + +#define ncr_reg_bus_addr(r) (np->paddr + offsetof (struct ncr_reg, r)) + +/*------------------------------------------------------------------------ +** Initialize the fixed part of a CCB structure. +**------------------------------------------------------------------------ +**------------------------------------------------------------------------ +*/ +static void ncr_init_ccb(struct ncb *np, struct ccb *cp) +{ + ncrcmd copy_4 = np->features & FE_PFEN ? SCR_COPY(4) : SCR_COPY_F(4); + + /* + ** Remember virtual and bus address of this ccb. + */ + cp->p_ccb = vtobus(cp); + cp->phys.header.cp = cp; + + /* + ** This allows list_del to work for the default ccb. + */ + INIT_LIST_HEAD(&cp->link_ccbq); + + /* + ** Initialyze the start and restart launch script. + ** + ** COPY(4) @(...p_phys), @(dsa) + ** JUMP @(sched_point) + */ + cp->start.setup_dsa[0] = cpu_to_scr(copy_4); + cp->start.setup_dsa[1] = cpu_to_scr(CCB_PHYS(cp, start.p_phys)); + cp->start.setup_dsa[2] = cpu_to_scr(ncr_reg_bus_addr(nc_dsa)); + cp->start.schedule.l_cmd = cpu_to_scr(SCR_JUMP); + cp->start.p_phys = cpu_to_scr(CCB_PHYS(cp, phys)); + + memcpy(&cp->restart, &cp->start, sizeof(cp->restart)); + + cp->start.schedule.l_paddr = cpu_to_scr(NCB_SCRIPT_PHYS (np, idle)); + cp->restart.schedule.l_paddr = cpu_to_scr(NCB_SCRIPTH_PHYS (np, abort)); +} + + +/*------------------------------------------------------------------------ +** Allocate a CCB and initialize its fixed part. +**------------------------------------------------------------------------ +**------------------------------------------------------------------------ +*/ +static void ncr_alloc_ccb(struct ncb *np, u_char tn, u_char ln) +{ + struct tcb *tp = &np->target[tn]; + struct lcb *lp = tp->lp[ln]; + struct ccb *cp = NULL; + + /* + ** Allocate memory for this CCB. + */ + cp = m_calloc_dma(sizeof(struct ccb), "CCB"); + if (!cp) + return; + + /* + ** Count it and initialyze it. + */ + lp->actccbs++; + np->actccbs++; + memset(cp, 0, sizeof (*cp)); + ncr_init_ccb(np, cp); + + /* + ** Chain into wakeup list and free ccb queue and take it + ** into account for tagged commands. + */ + cp->link_ccb = np->ccb->link_ccb; + np->ccb->link_ccb = cp; + + list_add(&cp->link_ccbq, &lp->free_ccbq); +} + +/*========================================================== +** +** +** Allocation of resources for Targets/Luns/Tags. +** +** +**========================================================== +*/ + + +/*------------------------------------------------------------------------ +** Target control block initialisation. +**------------------------------------------------------------------------ +** This data structure is fully initialized after a SCSI command +** has been successfully completed for this target. +** It contains a SCRIPT that is called on target reselection. +**------------------------------------------------------------------------ +*/ +static void ncr_init_tcb (struct ncb *np, u_char tn) +{ + struct tcb *tp = &np->target[tn]; + ncrcmd copy_1 = np->features & FE_PFEN ? SCR_COPY(1) : SCR_COPY_F(1); + int th = tn & 3; + int i; + + /* + ** Jump to next tcb if SFBR does not match this target. + ** JUMP IF (SFBR != #target#), @(next tcb) + */ + tp->jump_tcb.l_cmd = + cpu_to_scr((SCR_JUMP ^ IFFALSE (DATA (0x80 + tn)))); + tp->jump_tcb.l_paddr = np->jump_tcb[th].l_paddr; + + /* + ** Load the synchronous transfer register. + ** COPY @(tp->sval), @(sxfer) + */ + tp->getscr[0] = cpu_to_scr(copy_1); + tp->getscr[1] = cpu_to_scr(vtobus (&tp->sval)); +#ifdef SCSI_NCR_BIG_ENDIAN + tp->getscr[2] = cpu_to_scr(ncr_reg_bus_addr(nc_sxfer) ^ 3); +#else + tp->getscr[2] = cpu_to_scr(ncr_reg_bus_addr(nc_sxfer)); +#endif + + /* + ** Load the timing register. + ** COPY @(tp->wval), @(scntl3) + */ + tp->getscr[3] = cpu_to_scr(copy_1); + tp->getscr[4] = cpu_to_scr(vtobus (&tp->wval)); +#ifdef SCSI_NCR_BIG_ENDIAN + tp->getscr[5] = cpu_to_scr(ncr_reg_bus_addr(nc_scntl3) ^ 3); +#else + tp->getscr[5] = cpu_to_scr(ncr_reg_bus_addr(nc_scntl3)); +#endif + + /* + ** Get the IDENTIFY message and the lun. + ** CALL @script(resel_lun) + */ + tp->call_lun.l_cmd = cpu_to_scr(SCR_CALL); + tp->call_lun.l_paddr = cpu_to_scr(NCB_SCRIPT_PHYS (np, resel_lun)); + + /* + ** Look for the lun control block of this nexus. + ** For i = 0 to 3 + ** JUMP ^ IFTRUE (MASK (i, 3)), @(next_lcb) + */ + for (i = 0 ; i < 4 ; i++) { + tp->jump_lcb[i].l_cmd = + cpu_to_scr((SCR_JUMP ^ IFTRUE (MASK (i, 3)))); + tp->jump_lcb[i].l_paddr = + cpu_to_scr(NCB_SCRIPTH_PHYS (np, bad_identify)); + } + + /* + ** Link this target control block to the JUMP chain. + */ + np->jump_tcb[th].l_paddr = cpu_to_scr(vtobus (&tp->jump_tcb)); + + /* + ** These assert's should be moved at driver initialisations. + */ +#ifdef SCSI_NCR_BIG_ENDIAN + BUG_ON(((offsetof(struct ncr_reg, nc_sxfer) ^ + offsetof(struct tcb , sval )) &3) != 3); + BUG_ON(((offsetof(struct ncr_reg, nc_scntl3) ^ + offsetof(struct tcb , wval )) &3) != 3); +#else + BUG_ON(((offsetof(struct ncr_reg, nc_sxfer) ^ + offsetof(struct tcb , sval )) &3) != 0); + BUG_ON(((offsetof(struct ncr_reg, nc_scntl3) ^ + offsetof(struct tcb , wval )) &3) != 0); +#endif +} + + +/*------------------------------------------------------------------------ +** Lun control block allocation and initialization. +**------------------------------------------------------------------------ +** This data structure is allocated and initialized after a SCSI +** command has been successfully completed for this target/lun. +**------------------------------------------------------------------------ +*/ +static struct lcb *ncr_alloc_lcb (struct ncb *np, u_char tn, u_char ln) +{ + struct tcb *tp = &np->target[tn]; + struct lcb *lp = tp->lp[ln]; + ncrcmd copy_4 = np->features & FE_PFEN ? SCR_COPY(4) : SCR_COPY_F(4); + int lh = ln & 3; + + /* + ** Already done, return. + */ + if (lp) + return lp; + + /* + ** Allocate the lcb. + */ + lp = m_calloc_dma(sizeof(struct lcb), "LCB"); + if (!lp) + goto fail; + memset(lp, 0, sizeof(*lp)); + tp->lp[ln] = lp; + + /* + ** Initialize the target control block if not yet. + */ + if (!tp->jump_tcb.l_cmd) + ncr_init_tcb(np, tn); + + /* + ** Initialize the CCB queue headers. + */ + INIT_LIST_HEAD(&lp->free_ccbq); + INIT_LIST_HEAD(&lp->busy_ccbq); + INIT_LIST_HEAD(&lp->wait_ccbq); + INIT_LIST_HEAD(&lp->skip_ccbq); + + /* + ** Set max CCBs to 1 and use the default 1 entry + ** jump table by default. + */ + lp->maxnxs = 1; + lp->jump_ccb = &lp->jump_ccb_0; + lp->p_jump_ccb = cpu_to_scr(vtobus(lp->jump_ccb)); + + /* + ** Initilialyze the reselect script: + ** + ** Jump to next lcb if SFBR does not match this lun. + ** Load TEMP with the CCB direct jump table bus address. + ** Get the SIMPLE TAG message and the tag. + ** + ** JUMP IF (SFBR != #lun#), @(next lcb) + ** COPY @(lp->p_jump_ccb), @(temp) + ** JUMP @script(resel_notag) + */ + lp->jump_lcb.l_cmd = + cpu_to_scr((SCR_JUMP ^ IFFALSE (MASK (0x80+ln, 0xff)))); + lp->jump_lcb.l_paddr = tp->jump_lcb[lh].l_paddr; + + lp->load_jump_ccb[0] = cpu_to_scr(copy_4); + lp->load_jump_ccb[1] = cpu_to_scr(vtobus (&lp->p_jump_ccb)); + lp->load_jump_ccb[2] = cpu_to_scr(ncr_reg_bus_addr(nc_temp)); + + lp->jump_tag.l_cmd = cpu_to_scr(SCR_JUMP); + lp->jump_tag.l_paddr = cpu_to_scr(NCB_SCRIPT_PHYS (np, resel_notag)); + + /* + ** Link this lun control block to the JUMP chain. + */ + tp->jump_lcb[lh].l_paddr = cpu_to_scr(vtobus (&lp->jump_lcb)); + + /* + ** Initialize command queuing control. + */ + lp->busyccbs = 1; + lp->queuedccbs = 1; + lp->queuedepth = 1; +fail: + return lp; +} + + +/*------------------------------------------------------------------------ +** Lun control block setup on INQUIRY data received. +**------------------------------------------------------------------------ +** We only support WIDE, SYNC for targets and CMDQ for logical units. +** This setup is done on each INQUIRY since we are expecting user +** will play with CHANGE DEFINITION commands. :-) +**------------------------------------------------------------------------ +*/ +static struct lcb *ncr_setup_lcb (struct ncb *np, struct scsi_device *sdev) +{ + unsigned char tn = sdev->id, ln = sdev->lun; + struct tcb *tp = &np->target[tn]; + struct lcb *lp = tp->lp[ln]; + + /* If no lcb, try to allocate it. */ + if (!lp && !(lp = ncr_alloc_lcb(np, tn, ln))) + goto fail; + + /* + ** If unit supports tagged commands, allocate the + ** CCB JUMP table if not yet. + */ + if (sdev->tagged_supported && lp->jump_ccb == &lp->jump_ccb_0) { + int i; + lp->jump_ccb = m_calloc_dma(256, "JUMP_CCB"); + if (!lp->jump_ccb) { + lp->jump_ccb = &lp->jump_ccb_0; + goto fail; + } + lp->p_jump_ccb = cpu_to_scr(vtobus(lp->jump_ccb)); + for (i = 0 ; i < 64 ; i++) + lp->jump_ccb[i] = + cpu_to_scr(NCB_SCRIPTH_PHYS (np, bad_i_t_l_q)); + for (i = 0 ; i < MAX_TAGS ; i++) + lp->cb_tags[i] = i; + lp->maxnxs = MAX_TAGS; + lp->tags_stime = jiffies + 3*HZ; + ncr_setup_tags (np, sdev); + } + + +fail: + return lp; +} + +/*========================================================== +** +** +** Build Scatter Gather Block +** +** +**========================================================== +** +** The transfer area may be scattered among +** several non adjacent physical pages. +** +** We may use MAX_SCATTER blocks. +** +**---------------------------------------------------------- +*/ + +/* +** We try to reduce the number of interrupts caused +** by unexpected phase changes due to disconnects. +** A typical harddisk may disconnect before ANY block. +** If we wanted to avoid unexpected phase changes at all +** we had to use a break point every 512 bytes. +** Of course the number of scatter/gather blocks is +** limited. +** Under Linux, the scatter/gatter blocks are provided by +** the generic driver. We just have to copy addresses and +** sizes to the data segment array. +*/ + +static int ncr_scatter(struct ncb *np, struct ccb *cp, struct scsi_cmnd *cmd) +{ + int segment = 0; + int use_sg = scsi_sg_count(cmd); + + cp->data_len = 0; + + use_sg = map_scsi_sg_data(np, cmd); + if (use_sg > 0) { + struct scatterlist *sg; + struct scr_tblmove *data; + + if (use_sg > MAX_SCATTER) { + unmap_scsi_data(np, cmd); + return -1; + } + + data = &cp->phys.data[MAX_SCATTER - use_sg]; + + scsi_for_each_sg(cmd, sg, use_sg, segment) { + dma_addr_t baddr = sg_dma_address(sg); + unsigned int len = sg_dma_len(sg); + + ncr_build_sge(np, &data[segment], baddr, len); + cp->data_len += len; + } + } else + segment = -2; + + return segment; +} + +/*========================================================== +** +** +** Test the bus snoop logic :-( +** +** Has to be called with interrupts disabled. +** +** +**========================================================== +*/ + +static int __init ncr_regtest (struct ncb* np) +{ + register volatile u32 data; + /* + ** ncr registers may NOT be cached. + ** write 0xffffffff to a read only register area, + ** and try to read it back. + */ + data = 0xffffffff; + OUTL_OFF(offsetof(struct ncr_reg, nc_dstat), data); + data = INL_OFF(offsetof(struct ncr_reg, nc_dstat)); +#if 1 + if (data == 0xffffffff) { +#else + if ((data & 0xe2f0fffd) != 0x02000080) { +#endif + printk ("CACHE TEST FAILED: reg dstat-sstat2 readback %x.\n", + (unsigned) data); + return (0x10); + } + return (0); +} + +static int __init ncr_snooptest (struct ncb* np) +{ + u32 ncr_rd, ncr_wr, ncr_bk, host_rd, host_wr, pc; + int i, err=0; + if (np->reg) { + err |= ncr_regtest (np); + if (err) + return (err); + } + + /* init */ + pc = NCB_SCRIPTH_PHYS (np, snooptest); + host_wr = 1; + ncr_wr = 2; + /* + ** Set memory and register. + */ + np->ncr_cache = cpu_to_scr(host_wr); + OUTL (nc_temp, ncr_wr); + /* + ** Start script (exchange values) + */ + OUTL_DSP (pc); + /* + ** Wait 'til done (with timeout) + */ + for (i=0; i<NCR_SNOOP_TIMEOUT; i++) + if (INB(nc_istat) & (INTF|SIP|DIP)) + break; + /* + ** Save termination position. + */ + pc = INL (nc_dsp); + /* + ** Read memory and register. + */ + host_rd = scr_to_cpu(np->ncr_cache); + ncr_rd = INL (nc_scratcha); + ncr_bk = INL (nc_temp); + /* + ** Reset ncr chip + */ + ncr_chip_reset(np, 100); + /* + ** check for timeout + */ + if (i>=NCR_SNOOP_TIMEOUT) { + printk ("CACHE TEST FAILED: timeout.\n"); + return (0x20); + } + /* + ** Check termination position. + */ + if (pc != NCB_SCRIPTH_PHYS (np, snoopend)+8) { + printk ("CACHE TEST FAILED: script execution failed.\n"); + printk ("start=%08lx, pc=%08lx, end=%08lx\n", + (u_long) NCB_SCRIPTH_PHYS (np, snooptest), (u_long) pc, + (u_long) NCB_SCRIPTH_PHYS (np, snoopend) +8); + return (0x40); + } + /* + ** Show results. + */ + if (host_wr != ncr_rd) { + printk ("CACHE TEST FAILED: host wrote %d, ncr read %d.\n", + (int) host_wr, (int) ncr_rd); + err |= 1; + } + if (host_rd != ncr_wr) { + printk ("CACHE TEST FAILED: ncr wrote %d, host read %d.\n", + (int) ncr_wr, (int) host_rd); + err |= 2; + } + if (ncr_bk != ncr_wr) { + printk ("CACHE TEST FAILED: ncr wrote %d, read back %d.\n", + (int) ncr_wr, (int) ncr_bk); + err |= 4; + } + return (err); +} + +/*========================================================== +** +** Determine the ncr's clock frequency. +** This is essential for the negotiation +** of the synchronous transfer rate. +** +**========================================================== +** +** Note: we have to return the correct value. +** THERE IS NO SAFE DEFAULT VALUE. +** +** Most NCR/SYMBIOS boards are delivered with a 40 Mhz clock. +** 53C860 and 53C875 rev. 1 support fast20 transfers but +** do not have a clock doubler and so are provided with a +** 80 MHz clock. All other fast20 boards incorporate a doubler +** and so should be delivered with a 40 MHz clock. +** The future fast40 chips (895/895) use a 40 Mhz base clock +** and provide a clock quadrupler (160 Mhz). The code below +** tries to deal as cleverly as possible with all this stuff. +** +**---------------------------------------------------------- +*/ + +/* + * Select NCR SCSI clock frequency + */ +static void ncr_selectclock(struct ncb *np, u_char scntl3) +{ + if (np->multiplier < 2) { + OUTB(nc_scntl3, scntl3); + return; + } + + if (bootverbose >= 2) + printk ("%s: enabling clock multiplier\n", ncr_name(np)); + + OUTB(nc_stest1, DBLEN); /* Enable clock multiplier */ + if (np->multiplier > 2) { /* Poll bit 5 of stest4 for quadrupler */ + int i = 20; + while (!(INB(nc_stest4) & LCKFRQ) && --i > 0) + udelay(20); + if (!i) + printk("%s: the chip cannot lock the frequency\n", ncr_name(np)); + } else /* Wait 20 micro-seconds for doubler */ + udelay(20); + OUTB(nc_stest3, HSC); /* Halt the scsi clock */ + OUTB(nc_scntl3, scntl3); + OUTB(nc_stest1, (DBLEN|DBLSEL));/* Select clock multiplier */ + OUTB(nc_stest3, 0x00); /* Restart scsi clock */ +} + + +/* + * calculate NCR SCSI clock frequency (in KHz) + */ +static unsigned __init ncrgetfreq (struct ncb *np, int gen) +{ + unsigned ms = 0; + char count = 0; + + /* + * Measure GEN timer delay in order + * to calculate SCSI clock frequency + * + * This code will never execute too + * many loop iterations (if DELAY is + * reasonably correct). It could get + * too low a delay (too high a freq.) + * if the CPU is slow executing the + * loop for some reason (an NMI, for + * example). For this reason we will + * if multiple measurements are to be + * performed trust the higher delay + * (lower frequency returned). + */ + OUTB (nc_stest1, 0); /* make sure clock doubler is OFF */ + OUTW (nc_sien , 0); /* mask all scsi interrupts */ + (void) INW (nc_sist); /* clear pending scsi interrupt */ + OUTB (nc_dien , 0); /* mask all dma interrupts */ + (void) INW (nc_sist); /* another one, just to be sure :) */ + OUTB (nc_scntl3, 4); /* set pre-scaler to divide by 3 */ + OUTB (nc_stime1, 0); /* disable general purpose timer */ + OUTB (nc_stime1, gen); /* set to nominal delay of 1<<gen * 125us */ + while (!(INW(nc_sist) & GEN) && ms++ < 100000) { + for (count = 0; count < 10; count ++) + udelay(100); /* count ms */ + } + OUTB (nc_stime1, 0); /* disable general purpose timer */ + /* + * set prescaler to divide by whatever 0 means + * 0 ought to choose divide by 2, but appears + * to set divide by 3.5 mode in my 53c810 ... + */ + OUTB (nc_scntl3, 0); + + if (bootverbose >= 2) + printk ("%s: Delay (GEN=%d): %u msec\n", ncr_name(np), gen, ms); + /* + * adjust for prescaler, and convert into KHz + */ + return ms ? ((1 << gen) * 4340) / ms : 0; +} + +/* + * Get/probe NCR SCSI clock frequency + */ +static void __init ncr_getclock (struct ncb *np, int mult) +{ + unsigned char scntl3 = INB(nc_scntl3); + unsigned char stest1 = INB(nc_stest1); + unsigned f1; + + np->multiplier = 1; + f1 = 40000; + + /* + ** True with 875 or 895 with clock multiplier selected + */ + if (mult > 1 && (stest1 & (DBLEN+DBLSEL)) == DBLEN+DBLSEL) { + if (bootverbose >= 2) + printk ("%s: clock multiplier found\n", ncr_name(np)); + np->multiplier = mult; + } + + /* + ** If multiplier not found or scntl3 not 7,5,3, + ** reset chip and get frequency from general purpose timer. + ** Otherwise trust scntl3 BIOS setting. + */ + if (np->multiplier != mult || (scntl3 & 7) < 3 || !(scntl3 & 1)) { + unsigned f2; + + ncr_chip_reset(np, 5); + + (void) ncrgetfreq (np, 11); /* throw away first result */ + f1 = ncrgetfreq (np, 11); + f2 = ncrgetfreq (np, 11); + + if(bootverbose) + printk ("%s: NCR clock is %uKHz, %uKHz\n", ncr_name(np), f1, f2); + + if (f1 > f2) f1 = f2; /* trust lower result */ + + if (f1 < 45000) f1 = 40000; + else if (f1 < 55000) f1 = 50000; + else f1 = 80000; + + if (f1 < 80000 && mult > 1) { + if (bootverbose >= 2) + printk ("%s: clock multiplier assumed\n", ncr_name(np)); + np->multiplier = mult; + } + } else { + if ((scntl3 & 7) == 3) f1 = 40000; + else if ((scntl3 & 7) == 5) f1 = 80000; + else f1 = 160000; + + f1 /= np->multiplier; + } + + /* + ** Compute controller synchronous parameters. + */ + f1 *= np->multiplier; + np->clock_khz = f1; +} + +/*===================== LINUX ENTRY POINTS SECTION ==========================*/ + +static int ncr53c8xx_slave_alloc(struct scsi_device *device) +{ + struct Scsi_Host *host = device->host; + struct ncb *np = ((struct host_data *) host->hostdata)->ncb; + struct tcb *tp = &np->target[device->id]; + tp->starget = device->sdev_target; + + return 0; +} + +static int ncr53c8xx_slave_configure(struct scsi_device *device) +{ + struct Scsi_Host *host = device->host; + struct ncb *np = ((struct host_data *) host->hostdata)->ncb; + struct tcb *tp = &np->target[device->id]; + struct lcb *lp = tp->lp[device->lun]; + int numtags, depth_to_use; + + ncr_setup_lcb(np, device); + + /* + ** Select queue depth from driver setup. + ** Donnot use more than configured by user. + ** Use at least 2. + ** Donnot use more than our maximum. + */ + numtags = device_queue_depth(np->unit, device->id, device->lun); + if (numtags > tp->usrtags) + numtags = tp->usrtags; + if (!device->tagged_supported) + numtags = 1; + depth_to_use = numtags; + if (depth_to_use < 2) + depth_to_use = 2; + if (depth_to_use > MAX_TAGS) + depth_to_use = MAX_TAGS; + + scsi_change_queue_depth(device, depth_to_use); + + /* + ** Since the queue depth is not tunable under Linux, + ** we need to know this value in order not to + ** announce stupid things to user. + ** + ** XXX(hch): As of Linux 2.6 it certainly _is_ tunable.. + ** In fact we just tuned it, or did I miss + ** something important? :) + */ + if (lp) { + lp->numtags = lp->maxtags = numtags; + lp->scdev_depth = depth_to_use; + } + ncr_setup_tags (np, device); + +#ifdef DEBUG_NCR53C8XX + printk("ncr53c8xx_select_queue_depth: host=%d, id=%d, lun=%d, depth=%d\n", + np->unit, device->id, device->lun, depth_to_use); +#endif + + if (spi_support_sync(device->sdev_target) && + !spi_initial_dv(device->sdev_target)) + spi_dv_device(device); + return 0; +} + +static int ncr53c8xx_queue_command_lck (struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) +{ + struct ncb *np = ((struct host_data *) cmd->device->host->hostdata)->ncb; + unsigned long flags; + int sts; + +#ifdef DEBUG_NCR53C8XX +printk("ncr53c8xx_queue_command\n"); +#endif + + cmd->scsi_done = done; + cmd->host_scribble = NULL; + cmd->__data_mapped = 0; + cmd->__data_mapping = 0; + + spin_lock_irqsave(&np->smp_lock, flags); + + if ((sts = ncr_queue_command(np, cmd)) != DID_OK) { + cmd->result = ScsiResult(sts, 0); +#ifdef DEBUG_NCR53C8XX +printk("ncr53c8xx : command not queued - result=%d\n", sts); +#endif + } +#ifdef DEBUG_NCR53C8XX + else +printk("ncr53c8xx : command successfully queued\n"); +#endif + + spin_unlock_irqrestore(&np->smp_lock, flags); + + if (sts != DID_OK) { + unmap_scsi_data(np, cmd); + done(cmd); + sts = 0; + } + + return sts; +} + +static DEF_SCSI_QCMD(ncr53c8xx_queue_command) + +irqreturn_t ncr53c8xx_intr(int irq, void *dev_id) +{ + unsigned long flags; + struct Scsi_Host *shost = (struct Scsi_Host *)dev_id; + struct host_data *host_data = (struct host_data *)shost->hostdata; + struct ncb *np = host_data->ncb; + struct scsi_cmnd *done_list; + +#ifdef DEBUG_NCR53C8XX + printk("ncr53c8xx : interrupt received\n"); +#endif + + if (DEBUG_FLAGS & DEBUG_TINY) printk ("["); + + spin_lock_irqsave(&np->smp_lock, flags); + ncr_exception(np); + done_list = np->done_list; + np->done_list = NULL; + spin_unlock_irqrestore(&np->smp_lock, flags); + + if (DEBUG_FLAGS & DEBUG_TINY) printk ("]\n"); + + if (done_list) + ncr_flush_done_cmds(done_list); + return IRQ_HANDLED; +} + +static void ncr53c8xx_timeout(unsigned long npref) +{ + struct ncb *np = (struct ncb *) npref; + unsigned long flags; + struct scsi_cmnd *done_list; + + spin_lock_irqsave(&np->smp_lock, flags); + ncr_timeout(np); + done_list = np->done_list; + np->done_list = NULL; + spin_unlock_irqrestore(&np->smp_lock, flags); + + if (done_list) + ncr_flush_done_cmds(done_list); +} + +static int ncr53c8xx_bus_reset(struct scsi_cmnd *cmd) +{ + struct ncb *np = ((struct host_data *) cmd->device->host->hostdata)->ncb; + int sts; + unsigned long flags; + struct scsi_cmnd *done_list; + + /* + * If the mid-level driver told us reset is synchronous, it seems + * that we must call the done() callback for the involved command, + * even if this command was not queued to the low-level driver, + * before returning SUCCESS. + */ + + spin_lock_irqsave(&np->smp_lock, flags); + sts = ncr_reset_bus(np, cmd, 1); + + done_list = np->done_list; + np->done_list = NULL; + spin_unlock_irqrestore(&np->smp_lock, flags); + + ncr_flush_done_cmds(done_list); + + return sts; +} + +#if 0 /* unused and broken */ +static int ncr53c8xx_abort(struct scsi_cmnd *cmd) +{ + struct ncb *np = ((struct host_data *) cmd->device->host->hostdata)->ncb; + int sts; + unsigned long flags; + struct scsi_cmnd *done_list; + + printk("ncr53c8xx_abort\n"); + + NCR_LOCK_NCB(np, flags); + + sts = ncr_abort_command(np, cmd); +out: + done_list = np->done_list; + np->done_list = NULL; + NCR_UNLOCK_NCB(np, flags); + + ncr_flush_done_cmds(done_list); + + return sts; +} +#endif + + +/* +** Scsi command waiting list management. +** +** It may happen that we cannot insert a scsi command into the start queue, +** in the following circumstances. +** Too few preallocated ccb(s), +** maxtags < cmd_per_lun of the Linux host control block, +** etc... +** Such scsi commands are inserted into a waiting list. +** When a scsi command complete, we try to requeue the commands of the +** waiting list. +*/ + +#define next_wcmd host_scribble + +static void insert_into_waiting_list(struct ncb *np, struct scsi_cmnd *cmd) +{ + struct scsi_cmnd *wcmd; + +#ifdef DEBUG_WAITING_LIST + printk("%s: cmd %lx inserted into waiting list\n", ncr_name(np), (u_long) cmd); +#endif + cmd->next_wcmd = NULL; + if (!(wcmd = np->waiting_list)) np->waiting_list = cmd; + else { + while (wcmd->next_wcmd) + wcmd = (struct scsi_cmnd *) wcmd->next_wcmd; + wcmd->next_wcmd = (char *) cmd; + } +} + +static struct scsi_cmnd *retrieve_from_waiting_list(int to_remove, struct ncb *np, struct scsi_cmnd *cmd) +{ + struct scsi_cmnd **pcmd = &np->waiting_list; + + while (*pcmd) { + if (cmd == *pcmd) { + if (to_remove) { + *pcmd = (struct scsi_cmnd *) cmd->next_wcmd; + cmd->next_wcmd = NULL; + } +#ifdef DEBUG_WAITING_LIST + printk("%s: cmd %lx retrieved from waiting list\n", ncr_name(np), (u_long) cmd); +#endif + return cmd; + } + pcmd = (struct scsi_cmnd **) &(*pcmd)->next_wcmd; + } + return NULL; +} + +static void process_waiting_list(struct ncb *np, int sts) +{ + struct scsi_cmnd *waiting_list, *wcmd; + + waiting_list = np->waiting_list; + np->waiting_list = NULL; + +#ifdef DEBUG_WAITING_LIST + if (waiting_list) printk("%s: waiting_list=%lx processing sts=%d\n", ncr_name(np), (u_long) waiting_list, sts); +#endif + while ((wcmd = waiting_list) != NULL) { + waiting_list = (struct scsi_cmnd *) wcmd->next_wcmd; + wcmd->next_wcmd = NULL; + if (sts == DID_OK) { +#ifdef DEBUG_WAITING_LIST + printk("%s: cmd %lx trying to requeue\n", ncr_name(np), (u_long) wcmd); +#endif + sts = ncr_queue_command(np, wcmd); + } + if (sts != DID_OK) { +#ifdef DEBUG_WAITING_LIST + printk("%s: cmd %lx done forced sts=%d\n", ncr_name(np), (u_long) wcmd, sts); +#endif + wcmd->result = ScsiResult(sts, 0); + ncr_queue_done_cmd(np, wcmd); + } + } +} + +#undef next_wcmd + +static ssize_t show_ncr53c8xx_revision(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct Scsi_Host *host = class_to_shost(dev); + struct host_data *host_data = (struct host_data *)host->hostdata; + + return snprintf(buf, 20, "0x%x\n", host_data->ncb->revision_id); +} + +static struct device_attribute ncr53c8xx_revision_attr = { + .attr = { .name = "revision", .mode = S_IRUGO, }, + .show = show_ncr53c8xx_revision, +}; + +static struct device_attribute *ncr53c8xx_host_attrs[] = { + &ncr53c8xx_revision_attr, + NULL +}; + +/*========================================================== +** +** Boot command line. +** +**========================================================== +*/ +#ifdef MODULE +char *ncr53c8xx; /* command line passed by insmod */ +module_param(ncr53c8xx, charp, 0); +#endif + +#ifndef MODULE +static int __init ncr53c8xx_setup(char *str) +{ + return sym53c8xx__setup(str); +} + +__setup("ncr53c8xx=", ncr53c8xx_setup); +#endif + + +/* + * Host attach and initialisations. + * + * Allocate host data and ncb structure. + * Request IO region and remap MMIO region. + * Do chip initialization. + * If all is OK, install interrupt handling and + * start the timer daemon. + */ +struct Scsi_Host * __init ncr_attach(struct scsi_host_template *tpnt, + int unit, struct ncr_device *device) +{ + struct host_data *host_data; + struct ncb *np = NULL; + struct Scsi_Host *instance = NULL; + u_long flags = 0; + int i; + + if (!tpnt->name) + tpnt->name = SCSI_NCR_DRIVER_NAME; + if (!tpnt->shost_attrs) + tpnt->shost_attrs = ncr53c8xx_host_attrs; + + tpnt->queuecommand = ncr53c8xx_queue_command; + tpnt->slave_configure = ncr53c8xx_slave_configure; + tpnt->slave_alloc = ncr53c8xx_slave_alloc; + tpnt->eh_bus_reset_handler = ncr53c8xx_bus_reset; + tpnt->can_queue = SCSI_NCR_CAN_QUEUE; + tpnt->this_id = 7; + tpnt->sg_tablesize = SCSI_NCR_SG_TABLESIZE; + tpnt->cmd_per_lun = SCSI_NCR_CMD_PER_LUN; + tpnt->use_clustering = ENABLE_CLUSTERING; + + if (device->differential) + driver_setup.diff_support = device->differential; + + printk(KERN_INFO "ncr53c720-%d: rev 0x%x irq %d\n", + unit, device->chip.revision_id, device->slot.irq); + + instance = scsi_host_alloc(tpnt, sizeof(*host_data)); + if (!instance) + goto attach_error; + host_data = (struct host_data *) instance->hostdata; + + np = __m_calloc_dma(device->dev, sizeof(struct ncb), "NCB"); + if (!np) + goto attach_error; + spin_lock_init(&np->smp_lock); + np->dev = device->dev; + np->p_ncb = vtobus(np); + host_data->ncb = np; + + np->ccb = m_calloc_dma(sizeof(struct ccb), "CCB"); + if (!np->ccb) + goto attach_error; + + /* Store input information in the host data structure. */ + np->unit = unit; + np->verbose = driver_setup.verbose; + sprintf(np->inst_name, "ncr53c720-%d", np->unit); + np->revision_id = device->chip.revision_id; + np->features = device->chip.features; + np->clock_divn = device->chip.nr_divisor; + np->maxoffs = device->chip.offset_max; + np->maxburst = device->chip.burst_max; + np->myaddr = device->host_id; + + /* Allocate SCRIPTS areas. */ + np->script0 = m_calloc_dma(sizeof(struct script), "SCRIPT"); + if (!np->script0) + goto attach_error; + np->scripth0 = m_calloc_dma(sizeof(struct scripth), "SCRIPTH"); + if (!np->scripth0) + goto attach_error; + + init_timer(&np->timer); + np->timer.data = (unsigned long) np; + np->timer.function = ncr53c8xx_timeout; + + /* Try to map the controller chip to virtual and physical memory. */ + + np->paddr = device->slot.base; + np->paddr2 = (np->features & FE_RAM) ? device->slot.base_2 : 0; + + if (device->slot.base_v) + np->vaddr = device->slot.base_v; + else + np->vaddr = ioremap(device->slot.base_c, 128); + + if (!np->vaddr) { + printk(KERN_ERR + "%s: can't map memory mapped IO region\n",ncr_name(np)); + goto attach_error; + } else { + if (bootverbose > 1) + printk(KERN_INFO + "%s: using memory mapped IO at virtual address 0x%lx\n", ncr_name(np), (u_long) np->vaddr); + } + + /* Make the controller's registers available. Now the INB INW INL + * OUTB OUTW OUTL macros can be used safely. + */ + + np->reg = (struct ncr_reg __iomem *)np->vaddr; + + /* Do chip dependent initialization. */ + ncr_prepare_setting(np); + + if (np->paddr2 && sizeof(struct script) > 4096) { + np->paddr2 = 0; + printk(KERN_WARNING "%s: script too large, NOT using on chip RAM.\n", + ncr_name(np)); + } + + instance->max_channel = 0; + instance->this_id = np->myaddr; + instance->max_id = np->maxwide ? 16 : 8; + instance->max_lun = SCSI_NCR_MAX_LUN; + instance->base = (unsigned long) np->reg; + instance->irq = device->slot.irq; + instance->unique_id = device->slot.base; + instance->dma_channel = 0; + instance->cmd_per_lun = MAX_TAGS; + instance->can_queue = (MAX_START-4); + /* This can happen if you forget to call ncr53c8xx_init from + * your module_init */ + BUG_ON(!ncr53c8xx_transport_template); + instance->transportt = ncr53c8xx_transport_template; + + /* Patch script to physical addresses */ + ncr_script_fill(&script0, &scripth0); + + np->scripth = np->scripth0; + np->p_scripth = vtobus(np->scripth); + np->p_script = (np->paddr2) ? np->paddr2 : vtobus(np->script0); + + ncr_script_copy_and_bind(np, (ncrcmd *) &script0, + (ncrcmd *) np->script0, sizeof(struct script)); + ncr_script_copy_and_bind(np, (ncrcmd *) &scripth0, + (ncrcmd *) np->scripth0, sizeof(struct scripth)); + np->ccb->p_ccb = vtobus (np->ccb); + + /* Patch the script for LED support. */ + + if (np->features & FE_LED0) { + np->script0->idle[0] = + cpu_to_scr(SCR_REG_REG(gpreg, SCR_OR, 0x01)); + np->script0->reselected[0] = + cpu_to_scr(SCR_REG_REG(gpreg, SCR_AND, 0xfe)); + np->script0->start[0] = + cpu_to_scr(SCR_REG_REG(gpreg, SCR_AND, 0xfe)); + } + + /* + * Look for the target control block of this nexus. + * For i = 0 to 3 + * JUMP ^ IFTRUE (MASK (i, 3)), @(next_lcb) + */ + for (i = 0 ; i < 4 ; i++) { + np->jump_tcb[i].l_cmd = + cpu_to_scr((SCR_JUMP ^ IFTRUE (MASK (i, 3)))); + np->jump_tcb[i].l_paddr = + cpu_to_scr(NCB_SCRIPTH_PHYS (np, bad_target)); + } + + ncr_chip_reset(np, 100); + + /* Now check the cache handling of the chipset. */ + + if (ncr_snooptest(np)) { + printk(KERN_ERR "CACHE INCORRECTLY CONFIGURED.\n"); + goto attach_error; + } + + /* Install the interrupt handler. */ + np->irq = device->slot.irq; + + /* Initialize the fixed part of the default ccb. */ + ncr_init_ccb(np, np->ccb); + + /* + * After SCSI devices have been opened, we cannot reset the bus + * safely, so we do it here. Interrupt handler does the real work. + * Process the reset exception if interrupts are not enabled yet. + * Then enable disconnects. + */ + spin_lock_irqsave(&np->smp_lock, flags); + if (ncr_reset_scsi_bus(np, 0, driver_setup.settle_delay) != 0) { + printk(KERN_ERR "%s: FATAL ERROR: CHECK SCSI BUS - CABLES, TERMINATION, DEVICE POWER etc.!\n", ncr_name(np)); + + spin_unlock_irqrestore(&np->smp_lock, flags); + goto attach_error; + } + ncr_exception(np); + + np->disc = 1; + + /* + * The middle-level SCSI driver does not wait for devices to settle. + * Wait synchronously if more than 2 seconds. + */ + if (driver_setup.settle_delay > 2) { + printk(KERN_INFO "%s: waiting %d seconds for scsi devices to settle...\n", + ncr_name(np), driver_setup.settle_delay); + mdelay(1000 * driver_setup.settle_delay); + } + + /* start the timeout daemon */ + np->lasttime=0; + ncr_timeout (np); + + /* use SIMPLE TAG messages by default */ +#ifdef SCSI_NCR_ALWAYS_SIMPLE_TAG + np->order = SIMPLE_QUEUE_TAG; +#endif + + spin_unlock_irqrestore(&np->smp_lock, flags); + + return instance; + + attach_error: + if (!instance) + return NULL; + printk(KERN_INFO "%s: detaching...\n", ncr_name(np)); + if (!np) + goto unregister; + if (np->scripth0) + m_free_dma(np->scripth0, sizeof(struct scripth), "SCRIPTH"); + if (np->script0) + m_free_dma(np->script0, sizeof(struct script), "SCRIPT"); + if (np->ccb) + m_free_dma(np->ccb, sizeof(struct ccb), "CCB"); + m_free_dma(np, sizeof(struct ncb), "NCB"); + host_data->ncb = NULL; + + unregister: + scsi_host_put(instance); + + return NULL; +} + + +void ncr53c8xx_release(struct Scsi_Host *host) +{ + struct host_data *host_data = shost_priv(host); +#ifdef DEBUG_NCR53C8XX + printk("ncr53c8xx: release\n"); +#endif + if (host_data->ncb) + ncr_detach(host_data->ncb); + scsi_host_put(host); +} + +static void ncr53c8xx_set_period(struct scsi_target *starget, int period) +{ + struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); + struct ncb *np = ((struct host_data *)shost->hostdata)->ncb; + struct tcb *tp = &np->target[starget->id]; + + if (period > np->maxsync) + period = np->maxsync; + else if (period < np->minsync) + period = np->minsync; + + tp->usrsync = period; + + ncr_negotiate(np, tp); +} + +static void ncr53c8xx_set_offset(struct scsi_target *starget, int offset) +{ + struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); + struct ncb *np = ((struct host_data *)shost->hostdata)->ncb; + struct tcb *tp = &np->target[starget->id]; + + if (offset > np->maxoffs) + offset = np->maxoffs; + else if (offset < 0) + offset = 0; + + tp->maxoffs = offset; + + ncr_negotiate(np, tp); +} + +static void ncr53c8xx_set_width(struct scsi_target *starget, int width) +{ + struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); + struct ncb *np = ((struct host_data *)shost->hostdata)->ncb; + struct tcb *tp = &np->target[starget->id]; + + if (width > np->maxwide) + width = np->maxwide; + else if (width < 0) + width = 0; + + tp->usrwide = width; + + ncr_negotiate(np, tp); +} + +static void ncr53c8xx_get_signalling(struct Scsi_Host *shost) +{ + struct ncb *np = ((struct host_data *)shost->hostdata)->ncb; + enum spi_signal_type type; + + switch (np->scsi_mode) { + case SMODE_SE: + type = SPI_SIGNAL_SE; + break; + case SMODE_HVD: + type = SPI_SIGNAL_HVD; + break; + default: + type = SPI_SIGNAL_UNKNOWN; + break; + } + spi_signalling(shost) = type; +} + +static struct spi_function_template ncr53c8xx_transport_functions = { + .set_period = ncr53c8xx_set_period, + .show_period = 1, + .set_offset = ncr53c8xx_set_offset, + .show_offset = 1, + .set_width = ncr53c8xx_set_width, + .show_width = 1, + .get_signalling = ncr53c8xx_get_signalling, +}; + +int __init ncr53c8xx_init(void) +{ + ncr53c8xx_transport_template = spi_attach_transport(&ncr53c8xx_transport_functions); + if (!ncr53c8xx_transport_template) + return -ENODEV; + return 0; +} + +void ncr53c8xx_exit(void) +{ + spi_release_transport(ncr53c8xx_transport_template); +} |