diff options
Diffstat (limited to 'kernel/drivers/scsi/megaraid/mbox_defs.h')
| -rw-r--r-- | kernel/drivers/scsi/megaraid/mbox_defs.h | 790 |
1 files changed, 790 insertions, 0 deletions
diff --git a/kernel/drivers/scsi/megaraid/mbox_defs.h b/kernel/drivers/scsi/megaraid/mbox_defs.h new file mode 100644 index 000000000..e01c6f7c2 --- /dev/null +++ b/kernel/drivers/scsi/megaraid/mbox_defs.h @@ -0,0 +1,790 @@ +/* + * + * Linux MegaRAID Unified device driver + * + * Copyright (c) 2003-2004 LSI Logic Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * FILE : mbox_defs.h + * + */ +#ifndef _MRAID_MBOX_DEFS_H_ +#define _MRAID_MBOX_DEFS_H_ + +#include <linux/types.h> + +/* + * Commands and states for mailbox based controllers + */ + +#define MBOXCMD_LREAD 0x01 +#define MBOXCMD_LWRITE 0x02 +#define MBOXCMD_PASSTHRU 0x03 +#define MBOXCMD_ADPEXTINQ 0x04 +#define MBOXCMD_ADAPTERINQ 0x05 +#define MBOXCMD_LREAD64 0xA7 +#define MBOXCMD_LWRITE64 0xA8 +#define MBOXCMD_PASSTHRU64 0xC3 +#define MBOXCMD_EXTPTHRU 0xE3 + +#define MAIN_MISC_OPCODE 0xA4 +#define GET_MAX_SG_SUPPORT 0x01 +#define SUPPORT_EXT_CDB 0x16 + +#define FC_NEW_CONFIG 0xA1 +#define NC_SUBOP_PRODUCT_INFO 0x0E +#define NC_SUBOP_ENQUIRY3 0x0F +#define ENQ3_GET_SOLICITED_FULL 0x02 +#define OP_DCMD_READ_CONFIG 0x04 +#define NEW_READ_CONFIG_8LD 0x67 +#define READ_CONFIG_8LD 0x07 +#define FLUSH_ADAPTER 0x0A +#define FLUSH_SYSTEM 0xFE + +/* + * Command for random deletion of logical drives + */ +#define FC_DEL_LOGDRV 0xA4 +#define OP_SUP_DEL_LOGDRV 0x2A +#define OP_GET_LDID_MAP 0x18 +#define OP_DEL_LOGDRV 0x1C + +/* + * BIOS commands + */ +#define IS_BIOS_ENABLED 0x62 +#define GET_BIOS 0x01 +#define CHNL_CLASS 0xA9 +#define GET_CHNL_CLASS 0x00 +#define SET_CHNL_CLASS 0x01 +#define CH_RAID 0x01 +#define CH_SCSI 0x00 +#define BIOS_PVT_DATA 0x40 +#define GET_BIOS_PVT_DATA 0x00 + + +/* + * Commands to support clustering + */ +#define GET_TARGET_ID 0x7D +#define CLUSTER_OP 0x70 +#define GET_CLUSTER_MODE 0x02 +#define CLUSTER_CMD 0x6E +#define RESERVE_LD 0x01 +#define RELEASE_LD 0x02 +#define RESET_RESERVATIONS 0x03 +#define RESERVATION_STATUS 0x04 +#define RESERVE_PD 0x05 +#define RELEASE_PD 0x06 + + +/* + * Module battery status + */ +#define BATTERY_MODULE_MISSING 0x01 +#define BATTERY_LOW_VOLTAGE 0x02 +#define BATTERY_TEMP_HIGH 0x04 +#define BATTERY_PACK_MISSING 0x08 +#define BATTERY_CHARGE_MASK 0x30 +#define BATTERY_CHARGE_DONE 0x00 +#define BATTERY_CHARGE_INPROG 0x10 +#define BATTERY_CHARGE_FAIL 0x20 +#define BATTERY_CYCLES_EXCEEDED 0x40 + +/* + * Physical drive states. + */ +#define PDRV_UNCNF 0 +#define PDRV_ONLINE 3 +#define PDRV_FAILED 4 +#define PDRV_RBLD 5 +#define PDRV_HOTSPARE 6 + + +/* + * Raid logical drive states. + */ +#define RDRV_OFFLINE 0 +#define RDRV_DEGRADED 1 +#define RDRV_OPTIMAL 2 +#define RDRV_DELETED 3 + +/* + * Read, write and cache policies + */ +#define NO_READ_AHEAD 0 +#define READ_AHEAD 1 +#define ADAP_READ_AHEAD 2 +#define WRMODE_WRITE_THRU 0 +#define WRMODE_WRITE_BACK 1 +#define CACHED_IO 0 +#define DIRECT_IO 1 + +#define MAX_LOGICAL_DRIVES_8LD 8 +#define MAX_LOGICAL_DRIVES_40LD 40 +#define FC_MAX_PHYSICAL_DEVICES 256 +#define MAX_MBOX_CHANNELS 5 +#define MAX_MBOX_TARGET 15 +#define MBOX_MAX_PHYSICAL_DRIVES MAX_MBOX_CHANNELS*MAX_MBOX_TARGET +#define MAX_ROW_SIZE_40LD 32 +#define MAX_ROW_SIZE_8LD 8 +#define SPAN_DEPTH_8_SPANS 8 +#define SPAN_DEPTH_4_SPANS 4 +#define MAX_REQ_SENSE_LEN 0x20 + + + +/** + * struct mbox_t - Driver and f/w handshake structure. + * @cmd : firmware command + * @cmdid : command id + * @numsectors : number of sectors to be transferred + * @lba : Logical Block Address on LD + * @xferaddr : DMA address for data transfer + * @logdrv : logical drive number + * @numsge : number of scatter gather elements in sg list + * @resvd : reserved + * @busy : f/w busy, must wait to issue more commands. + * @numstatus : number of commands completed. + * @status : status of the commands completed + * @completed : array of completed command ids. + * @poll : poll and ack sequence + * @ack : poll and ack sequence + * + * The central handshake structure between the driver and the firmware. This + * structure must be allocated by the driver and aligned at 8-byte boundary. + */ +#define MBOX_MAX_FIRMWARE_STATUS 46 +typedef struct { + uint8_t cmd; + uint8_t cmdid; + uint16_t numsectors; + uint32_t lba; + uint32_t xferaddr; + uint8_t logdrv; + uint8_t numsge; + uint8_t resvd; + uint8_t busy; + uint8_t numstatus; + uint8_t status; + uint8_t completed[MBOX_MAX_FIRMWARE_STATUS]; + uint8_t poll; + uint8_t ack; +} __attribute__ ((packed)) mbox_t; + + +/** + * mbox64_t - 64-bit extension for the mailbox + * @segment_lo : the low 32-bits of the address of the scatter-gather list + * @segment_hi : the upper 32-bits of the address of the scatter-gather list + * @mbox : 32-bit mailbox, whose xferadder field must be set to + * 0xFFFFFFFF + * + * This is the extension of the 32-bit mailbox to be able to perform DMA + * beyond 4GB address range. + */ +typedef struct { + uint32_t xferaddr_lo; + uint32_t xferaddr_hi; + mbox_t mbox32; +} __attribute__ ((packed)) mbox64_t; + +/* + * mailbox structure used for internal commands + */ +typedef struct { + u8 cmd; + u8 cmdid; + u8 opcode; + u8 subopcode; + u32 lba; + u32 xferaddr; + u8 logdrv; + u8 rsvd[3]; + u8 numstatus; + u8 status; +} __attribute__ ((packed)) int_mbox_t; + +/** + * mraid_passthru_t - passthru structure to issue commands to physical devices + * @timeout : command timeout, 0=6sec, 1=60sec, 2=10min, 3=3hr + * @ars : set if ARS required after check condition + * @islogical : set if command meant for logical devices + * @logdrv : logical drive number if command for LD + * @channel : Channel on which physical device is located + * @target : SCSI target of the device + * @queuetag : unused + * @queueaction : unused + * @cdb : SCSI CDB + * @cdblen : length of the CDB + * @reqsenselen : amount of request sense data to be returned + * @reqsensearea : Sense information buffer + * @numsge : number of scatter-gather elements in the sg list + * @scsistatus : SCSI status of the command completed. + * @dataxferaddr : DMA data transfer address + * @dataxferlen : amount of the data to be transferred. + */ +typedef struct { + uint8_t timeout :3; + uint8_t ars :1; + uint8_t reserved :3; + uint8_t islogical :1; + uint8_t logdrv; + uint8_t channel; + uint8_t target; + uint8_t queuetag; + uint8_t queueaction; + uint8_t cdb[10]; + uint8_t cdblen; + uint8_t reqsenselen; + uint8_t reqsensearea[MAX_REQ_SENSE_LEN]; + uint8_t numsge; + uint8_t scsistatus; + uint32_t dataxferaddr; + uint32_t dataxferlen; +} __attribute__ ((packed)) mraid_passthru_t; + +typedef struct { + + uint32_t dataxferaddr_lo; + uint32_t dataxferaddr_hi; + mraid_passthru_t pthru32; + +} __attribute__ ((packed)) mega_passthru64_t; + +/** + * mraid_epassthru_t - passthru structure to issue commands to physical devices + * @timeout : command timeout, 0=6sec, 1=60sec, 2=10min, 3=3hr + * @ars : set if ARS required after check condition + * @rsvd1 : reserved field + * @cd_rom : (?) + * @rsvd2 : reserved field + * @islogical : set if command meant for logical devices + * @logdrv : logical drive number if command for LD + * @channel : Channel on which physical device is located + * @target : SCSI target of the device + * @queuetag : unused + * @queueaction : unused + * @cdblen : length of the CDB + * @rsvd3 : reserved field + * @cdb : SCSI CDB + * @numsge : number of scatter-gather elements in the sg list + * @status : SCSI status of the command completed. + * @reqsenselen : amount of request sense data to be returned + * @reqsensearea : Sense information buffer + * @rsvd4 : reserved field + * @dataxferaddr : DMA data transfer address + * @dataxferlen : amount of the data to be transferred. + */ +typedef struct { + uint8_t timeout :3; + uint8_t ars :1; + uint8_t rsvd1 :1; + uint8_t cd_rom :1; + uint8_t rsvd2 :1; + uint8_t islogical :1; + uint8_t logdrv; + uint8_t channel; + uint8_t target; + uint8_t queuetag; + uint8_t queueaction; + uint8_t cdblen; + uint8_t rsvd3; + uint8_t cdb[16]; + uint8_t numsge; + uint8_t status; + uint8_t reqsenselen; + uint8_t reqsensearea[MAX_REQ_SENSE_LEN]; + uint8_t rsvd4; + uint32_t dataxferaddr; + uint32_t dataxferlen; +} __attribute__ ((packed)) mraid_epassthru_t; + + +/** + * mraid_pinfo_t - product info, static information about the controller + * @data_size : current size in bytes (not including resvd) + * @config_signature : Current value is 0x00282008 + * @fw_version : Firmware version + * @bios_version : version of the BIOS + * @product_name : Name given to the controller + * @max_commands : Maximum concurrent commands supported + * @nchannels : Number of SCSI Channels detected + * @fc_loop_present : Number of Fibre Loops detected + * @mem_type : EDO, FPM, SDRAM etc + * @signature : + * @dram_size : In terms of MB + * @subsysid : device PCI subsystem ID + * @subsysvid : device PCI subsystem vendor ID + * @notify_counters : + * @pad1k : 135 + 889 resvd = 1024 total size + * + * This structures holds the information about the controller which is not + * expected to change dynamically. + * + * The current value of config signature is 0x00282008: + * 0x28 = MAX_LOGICAL_DRIVES, + * 0x20 = Number of stripes and + * 0x08 = Number of spans + */ +typedef struct { + uint32_t data_size; + uint32_t config_signature; + uint8_t fw_version[16]; + uint8_t bios_version[16]; + uint8_t product_name[80]; + uint8_t max_commands; + uint8_t nchannels; + uint8_t fc_loop_present; + uint8_t mem_type; + uint32_t signature; + uint16_t dram_size; + uint16_t subsysid; + uint16_t subsysvid; + uint8_t notify_counters; + uint8_t pad1k[889]; +} __attribute__ ((packed)) mraid_pinfo_t; + + +/** + * mraid_notify_t - the notification structure + * @global_counter : Any change increments this counter + * @param_counter : Indicates any params changed + * @param_id : Param modified - defined below + * @param_val : New val of last param modified + * @write_config_counter : write config occurred + * @write_config_rsvd : + * @ldrv_op_counter : Indicates ldrv op started/completed + * @ldrv_opid : ldrv num + * @ldrv_opcmd : ldrv operation - defined below + * @ldrv_opstatus : status of the operation + * @ldrv_state_counter : Indicates change of ldrv state + * @ldrv_state_id : ldrv num + * @ldrv_state_new : New state + * @ldrv_state_old : old state + * @pdrv_state_counter : Indicates change of ldrv state + * @pdrv_state_id : pdrv id + * @pdrv_state_new : New state + * @pdrv_state_old : old state + * @pdrv_fmt_counter : Indicates pdrv format started/over + * @pdrv_fmt_id : pdrv id + * @pdrv_fmt_val : format started/over + * @pdrv_fmt_rsvd : + * @targ_xfer_counter : Indicates SCSI-2 Xfer rate change + * @targ_xfer_id : pdrv Id + * @targ_xfer_val : new Xfer params of last pdrv + * @targ_xfer_rsvd : + * @fcloop_id_chg_counter : Indicates loopid changed + * @fcloopid_pdrvid : pdrv id + * @fcloop_id0 : loopid on fc loop 0 + * @fcloop_id1 : loopid on fc loop 1 + * @fcloop_state_counter : Indicates loop state changed + * @fcloop_state0 : state of fc loop 0 + * @fcloop_state1 : state of fc loop 1 + * @fcloop_state_rsvd : + */ +typedef struct { + uint32_t global_counter; + uint8_t param_counter; + uint8_t param_id; + uint16_t param_val; + uint8_t write_config_counter; + uint8_t write_config_rsvd[3]; + uint8_t ldrv_op_counter; + uint8_t ldrv_opid; + uint8_t ldrv_opcmd; + uint8_t ldrv_opstatus; + uint8_t ldrv_state_counter; + uint8_t ldrv_state_id; + uint8_t ldrv_state_new; + uint8_t ldrv_state_old; + uint8_t pdrv_state_counter; + uint8_t pdrv_state_id; + uint8_t pdrv_state_new; + uint8_t pdrv_state_old; + uint8_t pdrv_fmt_counter; + uint8_t pdrv_fmt_id; + uint8_t pdrv_fmt_val; + uint8_t pdrv_fmt_rsvd; + uint8_t targ_xfer_counter; + uint8_t targ_xfer_id; + uint8_t targ_xfer_val; + uint8_t targ_xfer_rsvd; + uint8_t fcloop_id_chg_counter; + uint8_t fcloopid_pdrvid; + uint8_t fcloop_id0; + uint8_t fcloop_id1; + uint8_t fcloop_state_counter; + uint8_t fcloop_state0; + uint8_t fcloop_state1; + uint8_t fcloop_state_rsvd; +} __attribute__ ((packed)) mraid_notify_t; + + +/** + * mraid_inquiry3_t - enquiry for device information + * + * @data_size : current size in bytes (not including resvd) + * @notify : + * @notify_rsvd : + * @rebuild_rate : rebuild rate (0% - 100%) + * @cache_flush_int : cache flush interval in seconds + * @sense_alert : + * @drive_insert_count : drive insertion count + * @battery_status : + * @num_ldrv : no. of Log Drives configured + * @recon_state : state of reconstruct + * @ldrv_op_status : logdrv Status + * @ldrv_size : size of each log drv + * @ldrv_prop : + * @ldrv_state : state of log drives + * @pdrv_state : state of phys drvs. + * @pdrv_format : + * @targ_xfer : phys device transfer rate + * @pad1k : 761 + 263reserved = 1024 bytes total size + */ +#define MAX_NOTIFY_SIZE 0x80 +#define CUR_NOTIFY_SIZE sizeof(mraid_notify_t) + +typedef struct { + uint32_t data_size; + + mraid_notify_t notify; + + uint8_t notify_rsvd[MAX_NOTIFY_SIZE - CUR_NOTIFY_SIZE]; + + uint8_t rebuild_rate; + uint8_t cache_flush_int; + uint8_t sense_alert; + uint8_t drive_insert_count; + + uint8_t battery_status; + uint8_t num_ldrv; + uint8_t recon_state[MAX_LOGICAL_DRIVES_40LD / 8]; + uint16_t ldrv_op_status[MAX_LOGICAL_DRIVES_40LD / 8]; + + uint32_t ldrv_size[MAX_LOGICAL_DRIVES_40LD]; + uint8_t ldrv_prop[MAX_LOGICAL_DRIVES_40LD]; + uint8_t ldrv_state[MAX_LOGICAL_DRIVES_40LD]; + uint8_t pdrv_state[FC_MAX_PHYSICAL_DEVICES]; + uint16_t pdrv_format[FC_MAX_PHYSICAL_DEVICES / 16]; + + uint8_t targ_xfer[80]; + uint8_t pad1k[263]; +} __attribute__ ((packed)) mraid_inquiry3_t; + + +/** + * mraid_adapinfo_t - information about the adapter + * @max_commands : max concurrent commands supported + * @rebuild_rate : rebuild rate - 0% thru 100% + * @max_targ_per_chan : max targ per channel + * @nchannels : number of channels on HBA + * @fw_version : firmware version + * @age_of_flash : number of times FW has been flashed + * @chip_set_value : contents of 0xC0000832 + * @dram_size : in MB + * @cache_flush_interval : in seconds + * @bios_version : + * @board_type : + * @sense_alert : + * @write_config_count : increase with every configuration change + * @drive_inserted_count : increase with every drive inserted + * @inserted_drive : channel:Id of inserted drive + * @battery_status : bit 0: battery module missing + * bit 1: VBAD + * bit 2: temperature high + * bit 3: battery pack missing + * bit 4,5: + * 00 - charge complete + * 01 - fast charge in progress + * 10 - fast charge fail + * 11 - undefined + * bit 6: counter > 1000 + * bit 7: Undefined + * @dec_fault_bus_info : + */ +typedef struct { + uint8_t max_commands; + uint8_t rebuild_rate; + uint8_t max_targ_per_chan; + uint8_t nchannels; + uint8_t fw_version[4]; + uint16_t age_of_flash; + uint8_t chip_set_value; + uint8_t dram_size; + uint8_t cache_flush_interval; + uint8_t bios_version[4]; + uint8_t board_type; + uint8_t sense_alert; + uint8_t write_config_count; + uint8_t battery_status; + uint8_t dec_fault_bus_info; +} __attribute__ ((packed)) mraid_adapinfo_t; + + +/** + * mraid_ldrv_info_t - information about the logical drives + * @nldrv : Number of logical drives configured + * @rsvd : + * @size : size of each logical drive + * @prop : + * @state : state of each logical drive + */ +typedef struct { + uint8_t nldrv; + uint8_t rsvd[3]; + uint32_t size[MAX_LOGICAL_DRIVES_8LD]; + uint8_t prop[MAX_LOGICAL_DRIVES_8LD]; + uint8_t state[MAX_LOGICAL_DRIVES_8LD]; +} __attribute__ ((packed)) mraid_ldrv_info_t; + + +/** + * mraid_pdrv_info_t - information about the physical drives + * @pdrv_state : state of each physical drive + */ +typedef struct { + uint8_t pdrv_state[MBOX_MAX_PHYSICAL_DRIVES]; + uint8_t rsvd; +} __attribute__ ((packed)) mraid_pdrv_info_t; + + +/** + * mraid_inquiry_t - RAID inquiry, mailbox command 0x05 + * @mraid_adapinfo_t : adapter information + * @mraid_ldrv_info_t : logical drives information + * @mraid_pdrv_info_t : physical drives information + */ +typedef struct { + mraid_adapinfo_t adapter_info; + mraid_ldrv_info_t logdrv_info; + mraid_pdrv_info_t pdrv_info; +} __attribute__ ((packed)) mraid_inquiry_t; + + +/** + * mraid_extinq_t - RAID extended inquiry, mailbox command 0x04 + * + * @raid_inq : raid inquiry + * @phys_drv_format : + * @stack_attn : + * @modem_status : + * @rsvd : + */ +typedef struct { + mraid_inquiry_t raid_inq; + uint16_t phys_drv_format[MAX_MBOX_CHANNELS]; + uint8_t stack_attn; + uint8_t modem_status; + uint8_t rsvd[2]; +} __attribute__ ((packed)) mraid_extinq_t; + + +/** + * adap_device_t - device information + * @channel : channel fpor the device + * @target : target ID of the device + */ +typedef struct { + uint8_t channel; + uint8_t target; +}__attribute__ ((packed)) adap_device_t; + + +/** + * adap_span_40ld_t - 40LD span + * @start_blk : starting block + * @num_blks : number of blocks + */ +typedef struct { + uint32_t start_blk; + uint32_t num_blks; + adap_device_t device[MAX_ROW_SIZE_40LD]; +}__attribute__ ((packed)) adap_span_40ld_t; + + +/** + * adap_span_8ld_t - 8LD span + * @start_blk : starting block + * @num_blks : number of blocks + */ +typedef struct { + uint32_t start_blk; + uint32_t num_blks; + adap_device_t device[MAX_ROW_SIZE_8LD]; +}__attribute__ ((packed)) adap_span_8ld_t; + + +/** + * logdrv_param_t - logical drives parameters + * + * @span_depth : total number of spans + * @level : RAID level + * @read_ahead : read ahead, no read ahead, adaptive read ahead + * @stripe_sz : encoded stripe size + * @status : status of the logical drive + * @write_mode : write mode, write_through/write_back + * @direct_io : direct io or through cache + * @row_size : number of stripes in a row + */ +typedef struct { + uint8_t span_depth; + uint8_t level; + uint8_t read_ahead; + uint8_t stripe_sz; + uint8_t status; + uint8_t write_mode; + uint8_t direct_io; + uint8_t row_size; +} __attribute__ ((packed)) logdrv_param_t; + + +/** + * logdrv_40ld_t - logical drive definition for 40LD controllers + * @lparam : logical drives parameters + * @span : span + */ +typedef struct { + logdrv_param_t lparam; + adap_span_40ld_t span[SPAN_DEPTH_8_SPANS]; +}__attribute__ ((packed)) logdrv_40ld_t; + + +/** + * logdrv_8ld_span8_t - logical drive definition for 8LD controllers + * @lparam : logical drives parameters + * @span : span + * + * 8-LD logical drive with up to 8 spans + */ +typedef struct { + logdrv_param_t lparam; + adap_span_8ld_t span[SPAN_DEPTH_8_SPANS]; +}__attribute__ ((packed)) logdrv_8ld_span8_t; + + +/** + * logdrv_8ld_span4_t - logical drive definition for 8LD controllers + * @lparam : logical drives parameters + * @span : span + * + * 8-LD logical drive with up to 4 spans + */ +typedef struct { + logdrv_param_t lparam; + adap_span_8ld_t span[SPAN_DEPTH_4_SPANS]; +}__attribute__ ((packed)) logdrv_8ld_span4_t; + + +/** + * phys_drive_t - physical device information + * @type : Type of the device + * @cur_status : current status of the device + * @tag_depth : Level of tagging + * @sync_neg : sync negotiation - ENABLE or DISABLE + * @size : configurable size in terms of 512 byte + */ +typedef struct { + uint8_t type; + uint8_t cur_status; + uint8_t tag_depth; + uint8_t sync_neg; + uint32_t size; +}__attribute__ ((packed)) phys_drive_t; + + +/** + * disk_array_40ld_t - disk array for 40LD controllers + * @numldrv : number of logical drives + * @resvd : + * @ldrv : logical drives information + * @pdrv : physical drives information + */ +typedef struct { + uint8_t numldrv; + uint8_t resvd[3]; + logdrv_40ld_t ldrv[MAX_LOGICAL_DRIVES_40LD]; + phys_drive_t pdrv[MBOX_MAX_PHYSICAL_DRIVES]; +}__attribute__ ((packed)) disk_array_40ld_t; + + +/** + * disk_array_8ld_span8_t - disk array for 8LD controllers + * @numldrv : number of logical drives + * @resvd : + * @ldrv : logical drives information + * @pdrv : physical drives information + * + * Disk array for 8LD logical drives with up to 8 spans + */ +typedef struct { + uint8_t numldrv; + uint8_t resvd[3]; + logdrv_8ld_span8_t ldrv[MAX_LOGICAL_DRIVES_8LD]; + phys_drive_t pdrv[MBOX_MAX_PHYSICAL_DRIVES]; +}__attribute__ ((packed)) disk_array_8ld_span8_t; + + +/** + * disk_array_8ld_span4_t - disk array for 8LD controllers + * @numldrv : number of logical drives + * @resvd : + * @ldrv : logical drives information + * @pdrv : physical drives information + * + * Disk array for 8LD logical drives with up to 4 spans + */ +typedef struct { + uint8_t numldrv; + uint8_t resvd[3]; + logdrv_8ld_span4_t ldrv[MAX_LOGICAL_DRIVES_8LD]; + phys_drive_t pdrv[MBOX_MAX_PHYSICAL_DRIVES]; +}__attribute__ ((packed)) disk_array_8ld_span4_t; + + +/** + * struct private_bios_data - bios private data for boot devices + * @geometry : bits 0-3 - BIOS geometry, 0x0001 - 1GB, 0x0010 - 2GB, + * 0x1000 - 8GB, Others values are invalid + * @unused : bits 4-7 are unused + * @boot_drv : logical drive set as boot drive, 0..7 - for 8LD cards, + * 0..39 - for 40LD cards + * @cksum : 0-(sum of first 13 bytes of this structure) + */ +struct private_bios_data { + uint8_t geometry :4; + uint8_t unused :4; + uint8_t boot_drv; + uint8_t rsvd[12]; + uint16_t cksum; +} __attribute__ ((packed)); + + +/** + * mbox_sgl64 - 64-bit scatter list for mailbox based controllers + * @address : address of the buffer + * @length : data transfer length + */ +typedef struct { + uint64_t address; + uint32_t length; +} __attribute__ ((packed)) mbox_sgl64; + +/** + * mbox_sgl32 - 32-bit scatter list for mailbox based controllers + * @address : address of the buffer + * @length : data transfer length + */ +typedef struct { + uint32_t address; + uint32_t length; +} __attribute__ ((packed)) mbox_sgl32; + +#endif // _MRAID_MBOX_DEFS_H_ + +/* vim: set ts=8 sw=8 tw=78: */ |