diff options
Diffstat (limited to 'kernel/drivers/scsi/lpfc/lpfc_scsi.h')
| -rw-r--r-- | kernel/drivers/scsi/lpfc/lpfc_scsi.h | 186 |
1 files changed, 186 insertions, 0 deletions
diff --git a/kernel/drivers/scsi/lpfc/lpfc_scsi.h b/kernel/drivers/scsi/lpfc/lpfc_scsi.h new file mode 100644 index 000000000..474e30cde --- /dev/null +++ b/kernel/drivers/scsi/lpfc/lpfc_scsi.h @@ -0,0 +1,186 @@ +/******************************************************************* + * This file is part of the Emulex Linux Device Driver for * + * Fibre Channel Host Bus Adapters. * + * Copyright (C) 2004-2015 Emulex. All rights reserved. * + * EMULEX and SLI are trademarks of Emulex. * + * www.emulex.com * + * * + * This program is free software; you can redistribute it and/or * + * modify it under the terms of version 2 of the GNU General * + * Public License as published by the Free Software Foundation. * + * This program is distributed in the hope that it will be useful. * + * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND * + * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, * + * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE * + * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD * + * TO BE LEGALLY INVALID. See the GNU General Public License for * + * more details, a copy of which can be found in the file COPYING * + * included with this package. * + *******************************************************************/ + +#include <asm/byteorder.h> + +struct lpfc_hba; +#define LPFC_FCP_CDB_LEN 16 + +#define list_remove_head(list, entry, type, member) \ + do { \ + entry = NULL; \ + if (!list_empty(list)) { \ + entry = list_entry((list)->next, type, member); \ + list_del_init(&entry->member); \ + } \ + } while(0) + +#define list_get_first(list, type, member) \ + (list_empty(list)) ? NULL : \ + list_entry((list)->next, type, member) + +/* per-port data that is allocated in the FC transport for us */ +struct lpfc_rport_data { + struct lpfc_nodelist *pnode; /* Pointer to the node structure. */ +}; + +struct lpfc_device_id { + struct lpfc_name vport_wwpn; + struct lpfc_name target_wwpn; + uint64_t lun; +}; + +struct lpfc_device_data { + struct list_head listentry; + struct lpfc_rport_data *rport_data; + struct lpfc_device_id device_id; + bool oas_enabled; + bool available; +}; + +struct fcp_rsp { + uint32_t rspRsvd1; /* FC Word 0, byte 0:3 */ + uint32_t rspRsvd2; /* FC Word 1, byte 0:3 */ + + uint8_t rspStatus0; /* FCP_STATUS byte 0 (reserved) */ + uint8_t rspStatus1; /* FCP_STATUS byte 1 (reserved) */ + uint8_t rspStatus2; /* FCP_STATUS byte 2 field validity */ +#define RSP_LEN_VALID 0x01 /* bit 0 */ +#define SNS_LEN_VALID 0x02 /* bit 1 */ +#define RESID_OVER 0x04 /* bit 2 */ +#define RESID_UNDER 0x08 /* bit 3 */ + uint8_t rspStatus3; /* FCP_STATUS byte 3 SCSI status byte */ + + uint32_t rspResId; /* Residual xfer if residual count field set in + fcpStatus2 */ + /* Received in Big Endian format */ + uint32_t rspSnsLen; /* Length of sense data in fcpSnsInfo */ + /* Received in Big Endian format */ + uint32_t rspRspLen; /* Length of FCP response data in fcpRspInfo */ + /* Received in Big Endian format */ + + uint8_t rspInfo0; /* FCP_RSP_INFO byte 0 (reserved) */ + uint8_t rspInfo1; /* FCP_RSP_INFO byte 1 (reserved) */ + uint8_t rspInfo2; /* FCP_RSP_INFO byte 2 (reserved) */ + uint8_t rspInfo3; /* FCP_RSP_INFO RSP_CODE byte 3 */ + +#define RSP_NO_FAILURE 0x00 +#define RSP_DATA_BURST_ERR 0x01 +#define RSP_CMD_FIELD_ERR 0x02 +#define RSP_RO_MISMATCH_ERR 0x03 +#define RSP_TM_NOT_SUPPORTED 0x04 /* Task mgmt function not supported */ +#define RSP_TM_NOT_COMPLETED 0x05 /* Task mgmt function not performed */ +#define RSP_TM_INVALID_LU 0x09 /* Task mgmt function to invalid LU */ + + uint32_t rspInfoRsvd; /* FCP_RSP_INFO bytes 4-7 (reserved) */ + + uint8_t rspSnsInfo[128]; +#define SNS_ILLEGAL_REQ 0x05 /* sense key is byte 3 ([2]) */ +#define SNSCOD_BADCMD 0x20 /* sense code is byte 13 ([12]) */ +}; + +struct fcp_cmnd { + struct scsi_lun fcp_lun; + + uint8_t fcpCntl0; /* FCP_CNTL byte 0 (reserved) */ + uint8_t fcpCntl1; /* FCP_CNTL byte 1 task codes */ +#define SIMPLE_Q 0x00 +#define HEAD_OF_Q 0x01 +#define ORDERED_Q 0x02 +#define ACA_Q 0x04 +#define UNTAGGED 0x05 + uint8_t fcpCntl2; /* FCP_CTL byte 2 task management codes */ +#define FCP_ABORT_TASK_SET 0x02 /* Bit 1 */ +#define FCP_CLEAR_TASK_SET 0x04 /* bit 2 */ +#define FCP_BUS_RESET 0x08 /* bit 3 */ +#define FCP_LUN_RESET 0x10 /* bit 4 */ +#define FCP_TARGET_RESET 0x20 /* bit 5 */ +#define FCP_CLEAR_ACA 0x40 /* bit 6 */ +#define FCP_TERMINATE_TASK 0x80 /* bit 7 */ + uint8_t fcpCntl3; +#define WRITE_DATA 0x01 /* Bit 0 */ +#define READ_DATA 0x02 /* Bit 1 */ + + uint8_t fcpCdb[LPFC_FCP_CDB_LEN]; /* SRB cdb field is copied here */ + uint32_t fcpDl; /* Total transfer length */ + +}; + +struct lpfc_scsicmd_bkt { + uint32_t cmd_count; +}; + +struct lpfc_scsi_buf { + struct list_head list; + struct scsi_cmnd *pCmd; + struct lpfc_rport_data *rdata; + + uint32_t timeout; + + uint16_t exch_busy; /* SLI4 hba reported XB on complete WCQE */ + uint16_t status; /* From IOCB Word 7- ulpStatus */ + uint32_t result; /* From IOCB Word 4. */ + + uint32_t seg_cnt; /* Number of scatter-gather segments returned by + * dma_map_sg. The driver needs this for calls + * to dma_unmap_sg. */ + uint32_t prot_seg_cnt; /* seg_cnt's counterpart for protection data */ + + dma_addr_t nonsg_phys; /* Non scatter-gather physical address. */ + + /* + * data and dma_handle are the kernel virtual and bus address of the + * dma-able buffer containing the fcp_cmd, fcp_rsp and a scatter + * gather bde list that supports the sg_tablesize value. + */ + void *data; + dma_addr_t dma_handle; + + struct fcp_cmnd *fcp_cmnd; + struct fcp_rsp *fcp_rsp; + struct ulp_bde64 *fcp_bpl; + + dma_addr_t dma_phys_bpl; + + /* cur_iocbq has phys of the dma-able buffer. + * Iotag is in here + */ + struct lpfc_iocbq cur_iocbq; + wait_queue_head_t *waitq; + unsigned long start_time; + +#ifdef CONFIG_SCSI_LPFC_DEBUG_FS + /* Used to restore any changes to protection data for error injection */ + void *prot_data_segment; + uint32_t prot_data; + uint32_t prot_data_type; +#define LPFC_INJERR_REFTAG 1 +#define LPFC_INJERR_APPTAG 2 +#define LPFC_INJERR_GUARD 3 +#endif +}; + +#define LPFC_SCSI_DMA_EXT_SIZE 264 +#define LPFC_BPL_SIZE 1024 +#define MDAC_DIRECT_CMD 0x22 + +#define FIND_FIRST_OAS_LUN 0 +#define NO_MORE_OAS_LUN -1 +#define NOT_OAS_ENABLED_LUN NO_MORE_OAS_LUN |