summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/scsi/hpsa_cmd.h
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/scsi/hpsa_cmd.h')
-rw-r--r--kernel/drivers/scsi/hpsa_cmd.h794
1 files changed, 794 insertions, 0 deletions
diff --git a/kernel/drivers/scsi/hpsa_cmd.h b/kernel/drivers/scsi/hpsa_cmd.h
new file mode 100644
index 000000000..3a621c74b
--- /dev/null
+++ b/kernel/drivers/scsi/hpsa_cmd.h
@@ -0,0 +1,794 @@
+/*
+ * Disk Array driver for HP Smart Array SAS controllers
+ * Copyright 2000, 2014 Hewlett-Packard Development Company, L.P.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Questions/Comments/Bugfixes to iss_storagedev@hp.com
+ *
+ */
+#ifndef HPSA_CMD_H
+#define HPSA_CMD_H
+
+/* general boundary defintions */
+#define SENSEINFOBYTES 32 /* may vary between hbas */
+#define SG_ENTRIES_IN_CMD 32 /* Max SG entries excluding chain blocks */
+#define HPSA_SG_CHAIN 0x80000000
+#define HPSA_SG_LAST 0x40000000
+#define MAXREPLYQS 256
+
+/* Command Status value */
+#define CMD_SUCCESS 0x0000
+#define CMD_TARGET_STATUS 0x0001
+#define CMD_DATA_UNDERRUN 0x0002
+#define CMD_DATA_OVERRUN 0x0003
+#define CMD_INVALID 0x0004
+#define CMD_PROTOCOL_ERR 0x0005
+#define CMD_HARDWARE_ERR 0x0006
+#define CMD_CONNECTION_LOST 0x0007
+#define CMD_ABORTED 0x0008
+#define CMD_ABORT_FAILED 0x0009
+#define CMD_UNSOLICITED_ABORT 0x000A
+#define CMD_TIMEOUT 0x000B
+#define CMD_UNABORTABLE 0x000C
+#define CMD_IOACCEL_DISABLED 0x000E
+
+
+/* Unit Attentions ASC's as defined for the MSA2012sa */
+#define POWER_OR_RESET 0x29
+#define STATE_CHANGED 0x2a
+#define UNIT_ATTENTION_CLEARED 0x2f
+#define LUN_FAILED 0x3e
+#define REPORT_LUNS_CHANGED 0x3f
+
+/* Unit Attentions ASCQ's as defined for the MSA2012sa */
+
+ /* These ASCQ's defined for ASC = POWER_OR_RESET */
+#define POWER_ON_RESET 0x00
+#define POWER_ON_REBOOT 0x01
+#define SCSI_BUS_RESET 0x02
+#define MSA_TARGET_RESET 0x03
+#define CONTROLLER_FAILOVER 0x04
+#define TRANSCEIVER_SE 0x05
+#define TRANSCEIVER_LVD 0x06
+
+ /* These ASCQ's defined for ASC = STATE_CHANGED */
+#define RESERVATION_PREEMPTED 0x03
+#define ASYM_ACCESS_CHANGED 0x06
+#define LUN_CAPACITY_CHANGED 0x09
+
+/* transfer direction */
+#define XFER_NONE 0x00
+#define XFER_WRITE 0x01
+#define XFER_READ 0x02
+#define XFER_RSVD 0x03
+
+/* task attribute */
+#define ATTR_UNTAGGED 0x00
+#define ATTR_SIMPLE 0x04
+#define ATTR_HEADOFQUEUE 0x05
+#define ATTR_ORDERED 0x06
+#define ATTR_ACA 0x07
+
+/* cdb type */
+#define TYPE_CMD 0x00
+#define TYPE_MSG 0x01
+#define TYPE_IOACCEL2_CMD 0x81 /* 0x81 is not used by hardware */
+
+/* Message Types */
+#define HPSA_TASK_MANAGEMENT 0x00
+#define HPSA_RESET 0x01
+#define HPSA_SCAN 0x02
+#define HPSA_NOOP 0x03
+
+#define HPSA_CTLR_RESET_TYPE 0x00
+#define HPSA_BUS_RESET_TYPE 0x01
+#define HPSA_TARGET_RESET_TYPE 0x03
+#define HPSA_LUN_RESET_TYPE 0x04
+#define HPSA_NEXUS_RESET_TYPE 0x05
+
+/* Task Management Functions */
+#define HPSA_TMF_ABORT_TASK 0x00
+#define HPSA_TMF_ABORT_TASK_SET 0x01
+#define HPSA_TMF_CLEAR_ACA 0x02
+#define HPSA_TMF_CLEAR_TASK_SET 0x03
+#define HPSA_TMF_QUERY_TASK 0x04
+#define HPSA_TMF_QUERY_TASK_SET 0x05
+#define HPSA_TMF_QUERY_ASYNCEVENT 0x06
+
+
+
+/* config space register offsets */
+#define CFG_VENDORID 0x00
+#define CFG_DEVICEID 0x02
+#define CFG_I2OBAR 0x10
+#define CFG_MEM1BAR 0x14
+
+/* i2o space register offsets */
+#define I2O_IBDB_SET 0x20
+#define I2O_IBDB_CLEAR 0x70
+#define I2O_INT_STATUS 0x30
+#define I2O_INT_MASK 0x34
+#define I2O_IBPOST_Q 0x40
+#define I2O_OBPOST_Q 0x44
+#define I2O_DMA1_CFG 0x214
+
+/* Configuration Table */
+#define CFGTBL_ChangeReq 0x00000001l
+#define CFGTBL_AccCmds 0x00000001l
+#define DOORBELL_CTLR_RESET 0x00000004l
+#define DOORBELL_CTLR_RESET2 0x00000020l
+#define DOORBELL_CLEAR_EVENTS 0x00000040l
+
+#define CFGTBL_Trans_Simple 0x00000002l
+#define CFGTBL_Trans_Performant 0x00000004l
+#define CFGTBL_Trans_io_accel1 0x00000080l
+#define CFGTBL_Trans_io_accel2 0x00000100l
+#define CFGTBL_Trans_use_short_tags 0x20000000l
+#define CFGTBL_Trans_enable_directed_msix (1 << 30)
+
+#define CFGTBL_BusType_Ultra2 0x00000001l
+#define CFGTBL_BusType_Ultra3 0x00000002l
+#define CFGTBL_BusType_Fibre1G 0x00000100l
+#define CFGTBL_BusType_Fibre2G 0x00000200l
+
+/* VPD Inquiry types */
+#define HPSA_VPD_SUPPORTED_PAGES 0x00
+#define HPSA_VPD_LV_DEVICE_GEOMETRY 0xC1
+#define HPSA_VPD_LV_IOACCEL_STATUS 0xC2
+#define HPSA_VPD_LV_STATUS 0xC3
+#define HPSA_VPD_HEADER_SZ 4
+
+/* Logical volume states */
+#define HPSA_VPD_LV_STATUS_UNSUPPORTED 0xff
+#define HPSA_LV_OK 0x0
+#define HPSA_LV_UNDERGOING_ERASE 0x0F
+#define HPSA_LV_UNDERGOING_RPI 0x12
+#define HPSA_LV_PENDING_RPI 0x13
+#define HPSA_LV_ENCRYPTED_NO_KEY 0x14
+#define HPSA_LV_PLAINTEXT_IN_ENCRYPT_ONLY_CONTROLLER 0x15
+#define HPSA_LV_UNDERGOING_ENCRYPTION 0x16
+#define HPSA_LV_UNDERGOING_ENCRYPTION_REKEYING 0x17
+#define HPSA_LV_ENCRYPTED_IN_NON_ENCRYPTED_CONTROLLER 0x18
+#define HPSA_LV_PENDING_ENCRYPTION 0x19
+#define HPSA_LV_PENDING_ENCRYPTION_REKEYING 0x1A
+
+struct vals32 {
+ u32 lower;
+ u32 upper;
+};
+
+union u64bit {
+ struct vals32 val32;
+ u64 val;
+};
+
+/* FIXME this is a per controller value (barf!) */
+#define HPSA_MAX_LUN 1024
+#define HPSA_MAX_PHYS_LUN 1024
+#define MAX_EXT_TARGETS 32
+#define HPSA_MAX_DEVICES (HPSA_MAX_PHYS_LUN + HPSA_MAX_LUN + \
+ MAX_EXT_TARGETS + 1) /* + 1 is for the controller itself */
+
+/* SCSI-3 Commands */
+#pragma pack(1)
+
+#define HPSA_INQUIRY 0x12
+struct InquiryData {
+ u8 data_byte[36];
+};
+
+#define HPSA_REPORT_LOG 0xc2 /* Report Logical LUNs */
+#define HPSA_REPORT_PHYS 0xc3 /* Report Physical LUNs */
+#define HPSA_REPORT_PHYS_EXTENDED 0x02
+#define HPSA_CISS_READ 0xc0 /* CISS Read */
+#define HPSA_GET_RAID_MAP 0xc8 /* CISS Get RAID Layout Map */
+
+#define RAID_MAP_MAX_ENTRIES 256
+
+struct raid_map_disk_data {
+ u32 ioaccel_handle; /**< Handle to access this disk via the
+ * I/O accelerator */
+ u8 xor_mult[2]; /**< XOR multipliers for this position,
+ * valid for data disks only */
+ u8 reserved[2];
+};
+
+struct raid_map_data {
+ __le32 structure_size; /* Size of entire structure in bytes */
+ __le32 volume_blk_size; /* bytes / block in the volume */
+ __le64 volume_blk_cnt; /* logical blocks on the volume */
+ u8 phys_blk_shift; /* Shift factor to convert between
+ * units of logical blocks and physical
+ * disk blocks */
+ u8 parity_rotation_shift; /* Shift factor to convert between units
+ * of logical stripes and physical
+ * stripes */
+ __le16 strip_size; /* blocks used on each disk / stripe */
+ __le64 disk_starting_blk; /* First disk block used in volume */
+ __le64 disk_blk_cnt; /* disk blocks used by volume / disk */
+ __le16 data_disks_per_row; /* data disk entries / row in the map */
+ __le16 metadata_disks_per_row;/* mirror/parity disk entries / row
+ * in the map */
+ __le16 row_cnt; /* rows in each layout map */
+ __le16 layout_map_count; /* layout maps (1 map per mirror/parity
+ * group) */
+ __le16 flags; /* Bit 0 set if encryption enabled */
+#define RAID_MAP_FLAG_ENCRYPT_ON 0x01
+ __le16 dekindex; /* Data encryption key index. */
+ u8 reserved[16];
+ struct raid_map_disk_data data[RAID_MAP_MAX_ENTRIES];
+};
+
+struct ReportLUNdata {
+ u8 LUNListLength[4];
+ u8 extended_response_flag;
+ u8 reserved[3];
+ u8 LUN[HPSA_MAX_LUN][8];
+};
+
+struct ext_report_lun_entry {
+ u8 lunid[8];
+#define GET_BMIC_BUS(lunid) ((lunid)[7] & 0x3F)
+#define GET_BMIC_LEVEL_TWO_TARGET(lunid) ((lunid)[6])
+#define GET_BMIC_DRIVE_NUMBER(lunid) (((GET_BMIC_BUS((lunid)) - 1) << 8) + \
+ GET_BMIC_LEVEL_TWO_TARGET((lunid)))
+ u8 wwid[8];
+ u8 device_type;
+ u8 device_flags;
+ u8 lun_count; /* multi-lun device, how many luns */
+ u8 redundant_paths;
+ u32 ioaccel_handle; /* ioaccel1 only uses lower 16 bits */
+};
+
+struct ReportExtendedLUNdata {
+ u8 LUNListLength[4];
+ u8 extended_response_flag;
+ u8 reserved[3];
+ struct ext_report_lun_entry LUN[HPSA_MAX_PHYS_LUN];
+};
+
+struct SenseSubsystem_info {
+ u8 reserved[36];
+ u8 portname[8];
+ u8 reserved1[1108];
+};
+
+/* BMIC commands */
+#define BMIC_READ 0x26
+#define BMIC_WRITE 0x27
+#define BMIC_CACHE_FLUSH 0xc2
+#define HPSA_CACHE_FLUSH 0x01 /* C2 was already being used by HPSA */
+#define BMIC_FLASH_FIRMWARE 0xF7
+#define BMIC_SENSE_CONTROLLER_PARAMETERS 0x64
+#define BMIC_IDENTIFY_PHYSICAL_DEVICE 0x15
+
+/* Command List Structure */
+union SCSI3Addr {
+ struct {
+ u8 Dev;
+ u8 Bus:6;
+ u8 Mode:2; /* b00 */
+ } PeripDev;
+ struct {
+ u8 DevLSB;
+ u8 DevMSB:6;
+ u8 Mode:2; /* b01 */
+ } LogDev;
+ struct {
+ u8 Dev:5;
+ u8 Bus:3;
+ u8 Targ:6;
+ u8 Mode:2; /* b10 */
+ } LogUnit;
+};
+
+struct PhysDevAddr {
+ u32 TargetId:24;
+ u32 Bus:6;
+ u32 Mode:2;
+ /* 2 level target device addr */
+ union SCSI3Addr Target[2];
+};
+
+struct LogDevAddr {
+ u32 VolId:30;
+ u32 Mode:2;
+ u8 reserved[4];
+};
+
+union LUNAddr {
+ u8 LunAddrBytes[8];
+ union SCSI3Addr SCSI3Lun[4];
+ struct PhysDevAddr PhysDev;
+ struct LogDevAddr LogDev;
+};
+
+struct CommandListHeader {
+ u8 ReplyQueue;
+ u8 SGList;
+ __le16 SGTotal;
+ __le64 tag;
+ union LUNAddr LUN;
+};
+
+struct RequestBlock {
+ u8 CDBLen;
+ /*
+ * type_attr_dir:
+ * type: low 3 bits
+ * attr: middle 3 bits
+ * dir: high 2 bits
+ */
+ u8 type_attr_dir;
+#define TYPE_ATTR_DIR(t, a, d) ((((d) & 0x03) << 6) |\
+ (((a) & 0x07) << 3) |\
+ ((t) & 0x07))
+#define GET_TYPE(tad) ((tad) & 0x07)
+#define GET_ATTR(tad) (((tad) >> 3) & 0x07)
+#define GET_DIR(tad) (((tad) >> 6) & 0x03)
+ u16 Timeout;
+ u8 CDB[16];
+};
+
+struct ErrDescriptor {
+ __le64 Addr;
+ __le32 Len;
+};
+
+struct SGDescriptor {
+ __le64 Addr;
+ __le32 Len;
+ __le32 Ext;
+};
+
+union MoreErrInfo {
+ struct {
+ u8 Reserved[3];
+ u8 Type;
+ u32 ErrorInfo;
+ } Common_Info;
+ struct {
+ u8 Reserved[2];
+ u8 offense_size; /* size of offending entry */
+ u8 offense_num; /* byte # of offense 0-base */
+ u32 offense_value;
+ } Invalid_Cmd;
+};
+struct ErrorInfo {
+ u8 ScsiStatus;
+ u8 SenseLen;
+ u16 CommandStatus;
+ u32 ResidualCnt;
+ union MoreErrInfo MoreErrInfo;
+ u8 SenseInfo[SENSEINFOBYTES];
+};
+/* Command types */
+#define CMD_IOCTL_PEND 0x01
+#define CMD_SCSI 0x03
+#define CMD_IOACCEL1 0x04
+#define CMD_IOACCEL2 0x05
+
+#define DIRECT_LOOKUP_SHIFT 4
+#define DIRECT_LOOKUP_MASK (~((1 << DIRECT_LOOKUP_SHIFT) - 1))
+
+#define HPSA_ERROR_BIT 0x02
+struct ctlr_info; /* defined in hpsa.h */
+/* The size of this structure needs to be divisible by 128
+ * on all architectures. The low 4 bits of the addresses
+ * are used as follows:
+ *
+ * bit 0: to device, used to indicate "performant mode" command
+ * from device, indidcates error status.
+ * bit 1-3: to device, indicates block fetch table entry for
+ * reducing DMA in fetching commands from host memory.
+ */
+
+#define COMMANDLIST_ALIGNMENT 128
+struct CommandList {
+ struct CommandListHeader Header;
+ struct RequestBlock Request;
+ struct ErrDescriptor ErrDesc;
+ struct SGDescriptor SG[SG_ENTRIES_IN_CMD];
+ /* information associated with the command */
+ u32 busaddr; /* physical addr of this record */
+ struct ErrorInfo *err_info; /* pointer to the allocated mem */
+ struct ctlr_info *h;
+ int cmd_type;
+ long cmdindex;
+ struct completion *waiting;
+ struct scsi_cmnd *scsi_cmd;
+ struct work_struct work;
+
+ /*
+ * For commands using either of the two "ioaccel" paths to
+ * bypass the RAID stack and go directly to the physical disk
+ * phys_disk is a pointer to the hpsa_scsi_dev_t to which the
+ * i/o is destined. We need to store that here because the command
+ * may potentially encounter TASK SET FULL and need to be resubmitted
+ * For "normal" i/o's not using the "ioaccel" paths, phys_disk is
+ * not used.
+ */
+ struct hpsa_scsi_dev_t *phys_disk;
+ atomic_t refcount; /* Must be last to avoid memset in cmd_alloc */
+} __aligned(COMMANDLIST_ALIGNMENT);
+
+/* Max S/G elements in I/O accelerator command */
+#define IOACCEL1_MAXSGENTRIES 24
+#define IOACCEL2_MAXSGENTRIES 28
+
+/*
+ * Structure for I/O accelerator (mode 1) commands.
+ * Note that this structure must be 128-byte aligned in size.
+ */
+#define IOACCEL1_COMMANDLIST_ALIGNMENT 128
+struct io_accel1_cmd {
+ __le16 dev_handle; /* 0x00 - 0x01 */
+ u8 reserved1; /* 0x02 */
+ u8 function; /* 0x03 */
+ u8 reserved2[8]; /* 0x04 - 0x0B */
+ u32 err_info; /* 0x0C - 0x0F */
+ u8 reserved3[2]; /* 0x10 - 0x11 */
+ u8 err_info_len; /* 0x12 */
+ u8 reserved4; /* 0x13 */
+ u8 sgl_offset; /* 0x14 */
+ u8 reserved5[7]; /* 0x15 - 0x1B */
+ __le32 transfer_len; /* 0x1C - 0x1F */
+ u8 reserved6[4]; /* 0x20 - 0x23 */
+ __le16 io_flags; /* 0x24 - 0x25 */
+ u8 reserved7[14]; /* 0x26 - 0x33 */
+ u8 LUN[8]; /* 0x34 - 0x3B */
+ __le32 control; /* 0x3C - 0x3F */
+ u8 CDB[16]; /* 0x40 - 0x4F */
+ u8 reserved8[16]; /* 0x50 - 0x5F */
+ __le16 host_context_flags; /* 0x60 - 0x61 */
+ __le16 timeout_sec; /* 0x62 - 0x63 */
+ u8 ReplyQueue; /* 0x64 */
+ u8 reserved9[3]; /* 0x65 - 0x67 */
+ __le64 tag; /* 0x68 - 0x6F */
+ __le64 host_addr; /* 0x70 - 0x77 */
+ u8 CISS_LUN[8]; /* 0x78 - 0x7F */
+ struct SGDescriptor SG[IOACCEL1_MAXSGENTRIES];
+} __aligned(IOACCEL1_COMMANDLIST_ALIGNMENT);
+
+#define IOACCEL1_FUNCTION_SCSIIO 0x00
+#define IOACCEL1_SGLOFFSET 32
+
+#define IOACCEL1_IOFLAGS_IO_REQ 0x4000
+#define IOACCEL1_IOFLAGS_CDBLEN_MASK 0x001F
+#define IOACCEL1_IOFLAGS_CDBLEN_MAX 16
+
+#define IOACCEL1_CONTROL_NODATAXFER 0x00000000
+#define IOACCEL1_CONTROL_DATA_OUT 0x01000000
+#define IOACCEL1_CONTROL_DATA_IN 0x02000000
+#define IOACCEL1_CONTROL_TASKPRIO_MASK 0x00007800
+#define IOACCEL1_CONTROL_TASKPRIO_SHIFT 11
+#define IOACCEL1_CONTROL_SIMPLEQUEUE 0x00000000
+#define IOACCEL1_CONTROL_HEADOFQUEUE 0x00000100
+#define IOACCEL1_CONTROL_ORDEREDQUEUE 0x00000200
+#define IOACCEL1_CONTROL_ACA 0x00000400
+
+#define IOACCEL1_HCFLAGS_CISS_FORMAT 0x0013
+
+#define IOACCEL1_BUSADDR_CMDTYPE 0x00000060
+
+struct ioaccel2_sg_element {
+ __le64 address;
+ __le32 length;
+ u8 reserved[3];
+ u8 chain_indicator;
+#define IOACCEL2_CHAIN 0x80
+};
+
+/*
+ * SCSI Response Format structure for IO Accelerator Mode 2
+ */
+struct io_accel2_scsi_response {
+ u8 IU_type;
+#define IOACCEL2_IU_TYPE_SRF 0x60
+ u8 reserved1[3];
+ u8 req_id[4]; /* request identifier */
+ u8 reserved2[4];
+ u8 serv_response; /* service response */
+#define IOACCEL2_SERV_RESPONSE_COMPLETE 0x000
+#define IOACCEL2_SERV_RESPONSE_FAILURE 0x001
+#define IOACCEL2_SERV_RESPONSE_TMF_COMPLETE 0x002
+#define IOACCEL2_SERV_RESPONSE_TMF_SUCCESS 0x003
+#define IOACCEL2_SERV_RESPONSE_TMF_REJECTED 0x004
+#define IOACCEL2_SERV_RESPONSE_TMF_WRONG_LUN 0x005
+ u8 status; /* status */
+#define IOACCEL2_STATUS_SR_TASK_COMP_GOOD 0x00
+#define IOACCEL2_STATUS_SR_TASK_COMP_CHK_COND 0x02
+#define IOACCEL2_STATUS_SR_TASK_COMP_BUSY 0x08
+#define IOACCEL2_STATUS_SR_TASK_COMP_RES_CON 0x18
+#define IOACCEL2_STATUS_SR_TASK_COMP_SET_FULL 0x28
+#define IOACCEL2_STATUS_SR_TASK_COMP_ABORTED 0x40
+#define IOACCEL2_STATUS_SR_IOACCEL_DISABLED 0x0E
+ u8 data_present; /* low 2 bits */
+#define IOACCEL2_NO_DATAPRESENT 0x000
+#define IOACCEL2_RESPONSE_DATAPRESENT 0x001
+#define IOACCEL2_SENSE_DATA_PRESENT 0x002
+#define IOACCEL2_RESERVED 0x003
+ u8 sense_data_len; /* sense/response data length */
+ u8 resid_cnt[4]; /* residual count */
+ u8 sense_data_buff[32]; /* sense/response data buffer */
+};
+
+/*
+ * Structure for I/O accelerator (mode 2 or m2) commands.
+ * Note that this structure must be 128-byte aligned in size.
+ */
+#define IOACCEL2_COMMANDLIST_ALIGNMENT 128
+struct io_accel2_cmd {
+ u8 IU_type; /* IU Type */
+ u8 direction; /* direction, memtype, and encryption */
+#define IOACCEL2_DIRECTION_MASK 0x03 /* bits 0,1: direction */
+#define IOACCEL2_DIRECTION_MEMTYPE_MASK 0x04 /* bit 2: memtype source/dest */
+ /* 0b=PCIe, 1b=DDR */
+#define IOACCEL2_DIRECTION_ENCRYPT_MASK 0x08 /* bit 3: encryption flag */
+ /* 0=off, 1=on */
+ u8 reply_queue; /* Reply Queue ID */
+ u8 reserved1; /* Reserved */
+ __le32 scsi_nexus; /* Device Handle */
+ __le32 Tag; /* cciss tag, lower 4 bytes only */
+ __le32 tweak_lower; /* Encryption tweak, lower 4 bytes */
+ u8 cdb[16]; /* SCSI Command Descriptor Block */
+ u8 cciss_lun[8]; /* 8 byte SCSI address */
+ __le32 data_len; /* Total bytes to transfer */
+ u8 cmd_priority_task_attr; /* priority and task attrs */
+#define IOACCEL2_PRIORITY_MASK 0x78
+#define IOACCEL2_ATTR_MASK 0x07
+ u8 sg_count; /* Number of sg elements */
+ __le16 dekindex; /* Data encryption key index */
+ __le64 err_ptr; /* Error Pointer */
+ __le32 err_len; /* Error Length*/
+ __le32 tweak_upper; /* Encryption tweak, upper 4 bytes */
+ struct ioaccel2_sg_element sg[IOACCEL2_MAXSGENTRIES];
+ struct io_accel2_scsi_response error_data;
+} __aligned(IOACCEL2_COMMANDLIST_ALIGNMENT);
+
+/*
+ * defines for Mode 2 command struct
+ * FIXME: this can't be all I need mfm
+ */
+#define IOACCEL2_IU_TYPE 0x40
+#define IOACCEL2_IU_TMF_TYPE 0x41
+#define IOACCEL2_DIR_NO_DATA 0x00
+#define IOACCEL2_DIR_DATA_IN 0x01
+#define IOACCEL2_DIR_DATA_OUT 0x02
+/*
+ * SCSI Task Management Request format for Accelerator Mode 2
+ */
+struct hpsa_tmf_struct {
+ u8 iu_type; /* Information Unit Type */
+ u8 reply_queue; /* Reply Queue ID */
+ u8 tmf; /* Task Management Function */
+ u8 reserved1; /* byte 3 Reserved */
+ u32 it_nexus; /* SCSI I-T Nexus */
+ u8 lun_id[8]; /* LUN ID for TMF request */
+ __le64 tag; /* cciss tag associated w/ request */
+ __le64 abort_tag; /* cciss tag of SCSI cmd or TMF to abort */
+ __le64 error_ptr; /* Error Pointer */
+ __le32 error_len; /* Error Length */
+};
+
+/* Configuration Table Structure */
+struct HostWrite {
+ __le32 TransportRequest;
+ __le32 command_pool_addr_hi;
+ __le32 CoalIntDelay;
+ __le32 CoalIntCount;
+};
+
+#define SIMPLE_MODE 0x02
+#define PERFORMANT_MODE 0x04
+#define MEMQ_MODE 0x08
+#define IOACCEL_MODE_1 0x80
+
+#define DRIVER_SUPPORT_UA_ENABLE 0x00000001
+
+struct CfgTable {
+ u8 Signature[4];
+ __le32 SpecValence;
+ __le32 TransportSupport;
+ __le32 TransportActive;
+ struct HostWrite HostWrite;
+ __le32 CmdsOutMax;
+ __le32 BusTypes;
+ __le32 TransMethodOffset;
+ u8 ServerName[16];
+ __le32 HeartBeat;
+ __le32 driver_support;
+#define ENABLE_SCSI_PREFETCH 0x100
+#define ENABLE_UNIT_ATTN 0x01
+ __le32 MaxScatterGatherElements;
+ __le32 MaxLogicalUnits;
+ __le32 MaxPhysicalDevices;
+ __le32 MaxPhysicalDrivesPerLogicalUnit;
+ __le32 MaxPerformantModeCommands;
+ __le32 MaxBlockFetch;
+ __le32 PowerConservationSupport;
+ __le32 PowerConservationEnable;
+ __le32 TMFSupportFlags;
+ u8 TMFTagMask[8];
+ u8 reserved[0x78 - 0x70];
+ __le32 misc_fw_support; /* offset 0x78 */
+#define MISC_FW_DOORBELL_RESET 0x02
+#define MISC_FW_DOORBELL_RESET2 0x010
+#define MISC_FW_RAID_OFFLOAD_BASIC 0x020
+#define MISC_FW_EVENT_NOTIFY 0x080
+ u8 driver_version[32];
+ __le32 max_cached_write_size;
+ u8 driver_scratchpad[16];
+ __le32 max_error_info_length;
+ __le32 io_accel_max_embedded_sg_count;
+ __le32 io_accel_request_size_offset;
+ __le32 event_notify;
+#define HPSA_EVENT_NOTIFY_ACCEL_IO_PATH_STATE_CHANGE (1 << 30)
+#define HPSA_EVENT_NOTIFY_ACCEL_IO_PATH_CONFIG_CHANGE (1 << 31)
+ __le32 clear_event_notify;
+};
+
+#define NUM_BLOCKFETCH_ENTRIES 8
+struct TransTable_struct {
+ __le32 BlockFetch[NUM_BLOCKFETCH_ENTRIES];
+ __le32 RepQSize;
+ __le32 RepQCount;
+ __le32 RepQCtrAddrLow32;
+ __le32 RepQCtrAddrHigh32;
+#define MAX_REPLY_QUEUES 64
+ struct vals32 RepQAddr[MAX_REPLY_QUEUES];
+};
+
+struct hpsa_pci_info {
+ unsigned char bus;
+ unsigned char dev_fn;
+ unsigned short domain;
+ u32 board_id;
+};
+
+struct bmic_identify_physical_device {
+ u8 scsi_bus; /* SCSI Bus number on controller */
+ u8 scsi_id; /* SCSI ID on this bus */
+ __le16 block_size; /* sector size in bytes */
+ __le32 total_blocks; /* number for sectors on drive */
+ __le32 reserved_blocks; /* controller reserved (RIS) */
+ u8 model[40]; /* Physical Drive Model */
+ u8 serial_number[40]; /* Drive Serial Number */
+ u8 firmware_revision[8]; /* drive firmware revision */
+ u8 scsi_inquiry_bits; /* inquiry byte 7 bits */
+ u8 compaq_drive_stamp; /* 0 means drive not stamped */
+ u8 last_failure_reason;
+#define BMIC_LAST_FAILURE_TOO_SMALL_IN_LOAD_CONFIG 0x01
+#define BMIC_LAST_FAILURE_ERROR_ERASING_RIS 0x02
+#define BMIC_LAST_FAILURE_ERROR_SAVING_RIS 0x03
+#define BMIC_LAST_FAILURE_FAIL_DRIVE_COMMAND 0x04
+#define BMIC_LAST_FAILURE_MARK_BAD_FAILED 0x05
+#define BMIC_LAST_FAILURE_MARK_BAD_FAILED_IN_FINISH_REMAP 0x06
+#define BMIC_LAST_FAILURE_TIMEOUT 0x07
+#define BMIC_LAST_FAILURE_AUTOSENSE_FAILED 0x08
+#define BMIC_LAST_FAILURE_MEDIUM_ERROR_1 0x09
+#define BMIC_LAST_FAILURE_MEDIUM_ERROR_2 0x0a
+#define BMIC_LAST_FAILURE_NOT_READY_BAD_SENSE 0x0b
+#define BMIC_LAST_FAILURE_NOT_READY 0x0c
+#define BMIC_LAST_FAILURE_HARDWARE_ERROR 0x0d
+#define BMIC_LAST_FAILURE_ABORTED_COMMAND 0x0e
+#define BMIC_LAST_FAILURE_WRITE_PROTECTED 0x0f
+#define BMIC_LAST_FAILURE_SPIN_UP_FAILURE_IN_RECOVER 0x10
+#define BMIC_LAST_FAILURE_REBUILD_WRITE_ERROR 0x11
+#define BMIC_LAST_FAILURE_TOO_SMALL_IN_HOT_PLUG 0x12
+#define BMIC_LAST_FAILURE_BUS_RESET_RECOVERY_ABORTED 0x13
+#define BMIC_LAST_FAILURE_REMOVED_IN_HOT_PLUG 0x14
+#define BMIC_LAST_FAILURE_INIT_REQUEST_SENSE_FAILED 0x15
+#define BMIC_LAST_FAILURE_INIT_START_UNIT_FAILED 0x16
+#define BMIC_LAST_FAILURE_INQUIRY_FAILED 0x17
+#define BMIC_LAST_FAILURE_NON_DISK_DEVICE 0x18
+#define BMIC_LAST_FAILURE_READ_CAPACITY_FAILED 0x19
+#define BMIC_LAST_FAILURE_INVALID_BLOCK_SIZE 0x1a
+#define BMIC_LAST_FAILURE_HOT_PLUG_REQUEST_SENSE_FAILED 0x1b
+#define BMIC_LAST_FAILURE_HOT_PLUG_START_UNIT_FAILED 0x1c
+#define BMIC_LAST_FAILURE_WRITE_ERROR_AFTER_REMAP 0x1d
+#define BMIC_LAST_FAILURE_INIT_RESET_RECOVERY_ABORTED 0x1e
+#define BMIC_LAST_FAILURE_DEFERRED_WRITE_ERROR 0x1f
+#define BMIC_LAST_FAILURE_MISSING_IN_SAVE_RIS 0x20
+#define BMIC_LAST_FAILURE_WRONG_REPLACE 0x21
+#define BMIC_LAST_FAILURE_GDP_VPD_INQUIRY_FAILED 0x22
+#define BMIC_LAST_FAILURE_GDP_MODE_SENSE_FAILED 0x23
+#define BMIC_LAST_FAILURE_DRIVE_NOT_IN_48BIT_MODE 0x24
+#define BMIC_LAST_FAILURE_DRIVE_TYPE_MIX_IN_HOT_PLUG 0x25
+#define BMIC_LAST_FAILURE_DRIVE_TYPE_MIX_IN_LOAD_CFG 0x26
+#define BMIC_LAST_FAILURE_PROTOCOL_ADAPTER_FAILED 0x27
+#define BMIC_LAST_FAILURE_FAULTY_ID_BAY_EMPTY 0x28
+#define BMIC_LAST_FAILURE_FAULTY_ID_BAY_OCCUPIED 0x29
+#define BMIC_LAST_FAILURE_FAULTY_ID_INVALID_BAY 0x2a
+#define BMIC_LAST_FAILURE_WRITE_RETRIES_FAILED 0x2b
+
+#define BMIC_LAST_FAILURE_SMART_ERROR_REPORTED 0x37
+#define BMIC_LAST_FAILURE_PHY_RESET_FAILED 0x38
+#define BMIC_LAST_FAILURE_ONLY_ONE_CTLR_CAN_SEE_DRIVE 0x40
+#define BMIC_LAST_FAILURE_KC_VOLUME_FAILED 0x41
+#define BMIC_LAST_FAILURE_UNEXPECTED_REPLACEMENT 0x42
+#define BMIC_LAST_FAILURE_OFFLINE_ERASE 0x80
+#define BMIC_LAST_FAILURE_OFFLINE_TOO_SMALL 0x81
+#define BMIC_LAST_FAILURE_OFFLINE_DRIVE_TYPE_MIX 0x82
+#define BMIC_LAST_FAILURE_OFFLINE_ERASE_COMPLETE 0x83
+
+ u8 flags;
+ u8 more_flags;
+ u8 scsi_lun; /* SCSI LUN for phys drive */
+ u8 yet_more_flags;
+ u8 even_more_flags;
+ __le32 spi_speed_rules;/* SPI Speed data:Ultra disable diagnose */
+ u8 phys_connector[2]; /* connector number on controller */
+ u8 phys_box_on_bus; /* phys enclosure this drive resides */
+ u8 phys_bay_in_box; /* phys drv bay this drive resides */
+ __le32 rpm; /* Drive rotational speed in rpm */
+ u8 device_type; /* type of drive */
+ u8 sata_version; /* only valid when drive_type is SATA */
+ __le64 big_total_block_count;
+ __le64 ris_starting_lba;
+ __le32 ris_size;
+ u8 wwid[20];
+ u8 controller_phy_map[32];
+ __le16 phy_count;
+ u8 phy_connected_dev_type[256];
+ u8 phy_to_drive_bay_num[256];
+ __le16 phy_to_attached_dev_index[256];
+ u8 box_index;
+ u8 reserved;
+ __le16 extra_physical_drive_flags;
+#define BMIC_PHYS_DRIVE_SUPPORTS_GAS_GAUGE(idphydrv) \
+ (idphydrv->extra_physical_drive_flags & (1 << 10))
+ u8 negotiated_link_rate[256];
+ u8 phy_to_phy_map[256];
+ u8 redundant_path_present_map;
+ u8 redundant_path_failure_map;
+ u8 active_path_number;
+ __le16 alternate_paths_phys_connector[8];
+ u8 alternate_paths_phys_box_on_port[8];
+ u8 multi_lun_device_lun_count;
+ u8 minimum_good_fw_revision[8];
+ u8 unique_inquiry_bytes[20];
+ u8 current_temperature_degreesC;
+ u8 temperature_threshold_degreesC;
+ u8 max_temperature_degreesC;
+ u8 logical_blocks_per_phys_block_exp; /* phyblocksize = 512*2^exp */
+ __le16 current_queue_depth_limit;
+ u8 switch_name[10];
+ __le16 switch_port;
+ u8 alternate_paths_switch_name[40];
+ u8 alternate_paths_switch_port[8];
+ __le16 power_on_hours; /* valid only if gas gauge supported */
+ __le16 percent_endurance_used; /* valid only if gas gauge supported. */
+#define BMIC_PHYS_DRIVE_SSD_WEAROUT(idphydrv) \
+ ((idphydrv->percent_endurance_used & 0x80) || \
+ (idphydrv->percent_endurance_used > 10000))
+ u8 drive_authentication;
+#define BMIC_PHYS_DRIVE_AUTHENTICATED(idphydrv) \
+ (idphydrv->drive_authentication == 0x80)
+ u8 smart_carrier_authentication;
+#define BMIC_SMART_CARRIER_AUTHENTICATION_SUPPORTED(idphydrv) \
+ (idphydrv->smart_carrier_authentication != 0x0)
+#define BMIC_SMART_CARRIER_AUTHENTICATED(idphydrv) \
+ (idphydrv->smart_carrier_authentication == 0x01)
+ u8 smart_carrier_app_fw_version;
+ u8 smart_carrier_bootloader_fw_version;
+ u8 encryption_key_name[64];
+ __le32 misc_drive_flags;
+ __le16 dek_index;
+ u8 padding[112];
+};
+
+#pragma pack()
+#endif /* HPSA_CMD_H */