diff options
Diffstat (limited to 'kernel/drivers/scsi/hpsa.h')
-rw-r--r-- | kernel/drivers/scsi/hpsa.h | 72 |
1 files changed, 62 insertions, 10 deletions
diff --git a/kernel/drivers/scsi/hpsa.h b/kernel/drivers/scsi/hpsa.h index 657713050..ae5beda1b 100644 --- a/kernel/drivers/scsi/hpsa.h +++ b/kernel/drivers/scsi/hpsa.h @@ -1,6 +1,7 @@ /* * Disk Array driver for HP Smart Array SAS controllers - * Copyright 2000, 2014 Hewlett-Packard Development Company, L.P. + * Copyright 2014-2015 PMC-Sierra, Inc. + * Copyright 2000,2009-2015 Hewlett-Packard Development Company, L.P. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -11,11 +12,7 @@ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or * NON INFRINGEMENT. See the GNU General Public License for more details. * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Questions/Comments/Bugfixes to iss_storagedev@hp.com + * Questions/Comments/Bugfixes to storagedev@pmcs.com * */ #ifndef HPSA_H @@ -36,24 +33,58 @@ struct access_method { unsigned long (*command_completed)(struct ctlr_info *h, u8 q); }; +/* for SAS hosts and SAS expanders */ +struct hpsa_sas_node { + struct device *parent_dev; + struct list_head port_list_head; +}; + +struct hpsa_sas_port { + struct list_head port_list_entry; + u64 sas_address; + struct sas_port *port; + int next_phy_index; + struct list_head phy_list_head; + struct hpsa_sas_node *parent_node; + struct sas_rphy *rphy; +}; + +struct hpsa_sas_phy { + struct list_head phy_list_entry; + struct sas_phy *phy; + struct hpsa_sas_port *parent_port; + bool added_to_port; +}; + struct hpsa_scsi_dev_t { - int devtype; + unsigned int devtype; int bus, target, lun; /* as presented to the OS */ unsigned char scsi3addr[8]; /* as presented to the HW */ + u8 physical_device : 1; + u8 expose_device; #define RAID_CTLR_LUNID "\0\0\0\0\0\0\0\0" unsigned char device_id[16]; /* from inquiry pg. 0x83 */ + u64 sas_address; unsigned char vendor[8]; /* bytes 8-15 of inquiry data */ unsigned char model[16]; /* bytes 16-31 of inquiry data */ unsigned char raid_level; /* from inquiry page 0xC1 */ unsigned char volume_offline; /* discovered via TUR or VPD */ u16 queue_depth; /* max queue_depth for this device */ + atomic_t reset_cmds_out; /* Count of commands to-be affected */ atomic_t ioaccel_cmds_out; /* Only used for physical devices * counts commands sent to physical * device via "ioaccel" path. */ u32 ioaccel_handle; + u8 active_path_index; + u8 path_map; + u8 bay; + u8 box[8]; + u16 phys_connector[8]; int offload_config; /* I/O accel RAID offload configured */ int offload_enabled; /* I/O accel RAID offload enabled */ + int offload_to_be_enabled; + int hba_ioaccel_enabled; int offload_to_mirror; /* Send next I/O accelerator RAID * offload request to mirror drive */ @@ -68,6 +99,10 @@ struct hpsa_scsi_dev_t { * devices in order to honor physical device queue depth limits. */ struct hpsa_scsi_dev_t *phys_disk[RAID_MAP_MAX_ENTRIES]; + int nphysical_disks; + int supports_aborts; + struct hpsa_sas_port *sas_port; + int external; /* 1-from external array 0-not <0-unknown */ }; struct reply_queue_buffer { @@ -104,7 +139,6 @@ struct bmic_controller_parameters { u8 automatic_drive_slamming; u8 reserved1; u8 nvram_flags; -#define HBA_MODE_ENABLED_FLAG (1 << 3) u8 cache_nvram_flags; u8 drive_config_flags; u16 reserved2; @@ -125,6 +159,7 @@ struct ctlr_info { char *product_name; struct pci_dev *pdev; u32 board_id; + u64 sas_address; void __iomem *vaddr; unsigned long paddr; int nr_cmds; /* Number of commands allowed on this controller */ @@ -133,7 +168,6 @@ struct ctlr_info { struct CfgTable __iomem *cfgtable; int interrupts_enabled; int max_commands; - int last_allocation; atomic_t commands_outstanding; # define PERF_MODE_INT 0 # define DOORBELL_INT 1 @@ -144,7 +178,6 @@ struct ctlr_info { unsigned int msi_vector; int intr_mode; /* either PERF_MODE_INT or SIMPLE_MODE_INT */ struct access_method access; - char hba_mode_enabled; /* queue and queue Info */ unsigned int Qdepth; @@ -154,6 +187,7 @@ struct ctlr_info { u8 max_cmd_sg_entries; int chainsize; struct SGDescriptor **cmd_sg_list; + struct ioaccel2_sg_element **ioaccel2_cmd_sg_list; /* pointers to command and error info pool */ struct CommandList *cmd_pool; @@ -211,6 +245,7 @@ struct ctlr_info { int remove_in_progress; /* Address of h->q[x] is passed to intr handler to know which queue */ u8 q[MAX_REPLY_QUEUES]; + char intrname[MAX_REPLY_QUEUES][16]; /* "hpsa0-msix00" names */ u32 TMFSupportFlags; /* cache what task mgmt funcs are supported. */ #define HPSATMF_BITS_SUPPORTED (1 << 0) #define HPSATMF_PHYS_LUN_RESET (1 << 1) @@ -222,6 +257,7 @@ struct ctlr_info { #define HPSATMF_PHYS_QRY_TASK (1 << 7) #define HPSATMF_PHYS_QRY_TSET (1 << 8) #define HPSATMF_PHYS_QRY_ASYNC (1 << 9) +#define HPSATMF_IOACCEL_ENABLED (1 << 15) #define HPSATMF_MASK_SUPPORTED (1 << 16) #define HPSATMF_LOG_LUN_RESET (1 << 17) #define HPSATMF_LOG_NEX_RESET (1 << 18) @@ -250,9 +286,19 @@ struct ctlr_info { spinlock_t offline_device_lock; struct list_head offline_device_list; int acciopath_status; + int drv_req_rescan; int raid_offload_debug; + int discovery_polling; + struct ReportLUNdata *lastlogicals; + int needs_abort_tags_swizzled; struct workqueue_struct *resubmit_wq; struct workqueue_struct *rescan_ctlr_wq; + atomic_t abort_cmds_available; + wait_queue_head_t abort_cmd_wait_queue; + wait_queue_head_t event_sync_wait_queue; + struct mutex reset_mutex; + u8 reset_in_progress; + struct hpsa_sas_node *sas_host; }; struct offline_device_entry { @@ -266,6 +312,7 @@ struct offline_device_entry { #define HPSA_RESET_TYPE_BUS 0x01 #define HPSA_RESET_TYPE_TARGET 0x03 #define HPSA_RESET_TYPE_LUN 0x04 +#define HPSA_PHYS_TARGET_RESET 0x99 /* not defined by cciss spec */ #define HPSA_MSG_SEND_RETRY_LIMIT 10 #define HPSA_MSG_SEND_RETRY_INTERVAL_MSECS (10000) @@ -350,6 +397,11 @@ struct offline_device_entry { #define IOACCEL2_INBOUND_POSTQ_64_LOW 0xd0 #define IOACCEL2_INBOUND_POSTQ_64_HI 0xd4 +#define HPSA_PHYSICAL_DEVICE_BUS 0 +#define HPSA_RAID_VOLUME_BUS 1 +#define HPSA_EXTERNAL_RAID_VOLUME_BUS 2 +#define HPSA_HBA_BUS 3 + /* Send the command to the hardware */ |