summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/scsi/aic7xxx/aic79xx_pci.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/scsi/aic7xxx/aic79xx_pci.c')
-rw-r--r--kernel/drivers/scsi/aic7xxx/aic79xx_pci.c1014
1 files changed, 1014 insertions, 0 deletions
diff --git a/kernel/drivers/scsi/aic7xxx/aic79xx_pci.c b/kernel/drivers/scsi/aic7xxx/aic79xx_pci.c
new file mode 100644
index 000000000..cc9bd26f5
--- /dev/null
+++ b/kernel/drivers/scsi/aic7xxx/aic79xx_pci.c
@@ -0,0 +1,1014 @@
+/*
+ * Product specific probe and attach routines for:
+ * aic7901 and aic7902 SCSI controllers
+ *
+ * Copyright (c) 1994-2001 Justin T. Gibbs.
+ * Copyright (c) 2000-2002 Adaptec Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ *
+ * $Id: //depot/aic7xxx/aic7xxx/aic79xx_pci.c#92 $
+ */
+
+#ifdef __linux__
+#include "aic79xx_osm.h"
+#include "aic79xx_inline.h"
+#else
+#include <dev/aic7xxx/aic79xx_osm.h>
+#include <dev/aic7xxx/aic79xx_inline.h>
+#endif
+
+#include "aic79xx_pci.h"
+
+static inline uint64_t
+ahd_compose_id(u_int device, u_int vendor, u_int subdevice, u_int subvendor)
+{
+ uint64_t id;
+
+ id = subvendor
+ | (subdevice << 16)
+ | ((uint64_t)vendor << 32)
+ | ((uint64_t)device << 48);
+
+ return (id);
+}
+
+#define ID_AIC7902_PCI_REV_A4 0x3
+#define ID_AIC7902_PCI_REV_B0 0x10
+#define SUBID_HP 0x0E11
+
+#define DEVID_9005_HOSTRAID(id) ((id) & 0x80)
+
+#define DEVID_9005_TYPE(id) ((id) & 0xF)
+#define DEVID_9005_TYPE_HBA 0x0 /* Standard Card */
+#define DEVID_9005_TYPE_HBA_2EXT 0x1 /* 2 External Ports */
+#define DEVID_9005_TYPE_IROC 0x8 /* Raid(0,1,10) Card */
+#define DEVID_9005_TYPE_MB 0xF /* On Motherboard */
+
+#define DEVID_9005_MFUNC(id) ((id) & 0x10)
+
+#define DEVID_9005_PACKETIZED(id) ((id) & 0x8000)
+
+#define SUBID_9005_TYPE(id) ((id) & 0xF)
+#define SUBID_9005_TYPE_HBA 0x0 /* Standard Card */
+#define SUBID_9005_TYPE_MB 0xF /* On Motherboard */
+
+#define SUBID_9005_AUTOTERM(id) (((id) & 0x10) == 0)
+
+#define SUBID_9005_LEGACYCONN_FUNC(id) ((id) & 0x20)
+
+#define SUBID_9005_SEEPTYPE(id) (((id) & 0x0C0) >> 6)
+#define SUBID_9005_SEEPTYPE_NONE 0x0
+#define SUBID_9005_SEEPTYPE_4K 0x1
+
+static ahd_device_setup_t ahd_aic7901_setup;
+static ahd_device_setup_t ahd_aic7901A_setup;
+static ahd_device_setup_t ahd_aic7902_setup;
+static ahd_device_setup_t ahd_aic790X_setup;
+
+static const struct ahd_pci_identity ahd_pci_ident_table[] =
+{
+ /* aic7901 based controllers */
+ {
+ ID_AHA_29320A,
+ ID_ALL_MASK,
+ "Adaptec 29320A Ultra320 SCSI adapter",
+ ahd_aic7901_setup
+ },
+ {
+ ID_AHA_29320ALP,
+ ID_ALL_MASK,
+ "Adaptec 29320ALP PCIx Ultra320 SCSI adapter",
+ ahd_aic7901_setup
+ },
+ {
+ ID_AHA_29320LPE,
+ ID_ALL_MASK,
+ "Adaptec 29320LPE PCIe Ultra320 SCSI adapter",
+ ahd_aic7901_setup
+ },
+ /* aic7901A based controllers */
+ {
+ ID_AHA_29320LP,
+ ID_ALL_MASK,
+ "Adaptec 29320LP Ultra320 SCSI adapter",
+ ahd_aic7901A_setup
+ },
+ /* aic7902 based controllers */
+ {
+ ID_AHA_29320,
+ ID_ALL_MASK,
+ "Adaptec 29320 Ultra320 SCSI adapter",
+ ahd_aic7902_setup
+ },
+ {
+ ID_AHA_29320B,
+ ID_ALL_MASK,
+ "Adaptec 29320B Ultra320 SCSI adapter",
+ ahd_aic7902_setup
+ },
+ {
+ ID_AHA_39320,
+ ID_ALL_MASK,
+ "Adaptec 39320 Ultra320 SCSI adapter",
+ ahd_aic7902_setup
+ },
+ {
+ ID_AHA_39320_B,
+ ID_ALL_MASK,
+ "Adaptec 39320 Ultra320 SCSI adapter",
+ ahd_aic7902_setup
+ },
+ {
+ ID_AHA_39320_B_DELL,
+ ID_ALL_MASK,
+ "Adaptec (Dell OEM) 39320 Ultra320 SCSI adapter",
+ ahd_aic7902_setup
+ },
+ {
+ ID_AHA_39320A,
+ ID_ALL_MASK,
+ "Adaptec 39320A Ultra320 SCSI adapter",
+ ahd_aic7902_setup
+ },
+ {
+ ID_AHA_39320D,
+ ID_ALL_MASK,
+ "Adaptec 39320D Ultra320 SCSI adapter",
+ ahd_aic7902_setup
+ },
+ {
+ ID_AHA_39320D_HP,
+ ID_ALL_MASK,
+ "Adaptec (HP OEM) 39320D Ultra320 SCSI adapter",
+ ahd_aic7902_setup
+ },
+ {
+ ID_AHA_39320D_B,
+ ID_ALL_MASK,
+ "Adaptec 39320D Ultra320 SCSI adapter",
+ ahd_aic7902_setup
+ },
+ {
+ ID_AHA_39320D_B_HP,
+ ID_ALL_MASK,
+ "Adaptec (HP OEM) 39320D Ultra320 SCSI adapter",
+ ahd_aic7902_setup
+ },
+ /* Generic chip probes for devices we don't know 'exactly' */
+ {
+ ID_AIC7901 & ID_9005_GENERIC_MASK,
+ ID_9005_GENERIC_MASK,
+ "Adaptec AIC7901 Ultra320 SCSI adapter",
+ ahd_aic7901_setup
+ },
+ {
+ ID_AIC7901A & ID_DEV_VENDOR_MASK,
+ ID_DEV_VENDOR_MASK,
+ "Adaptec AIC7901A Ultra320 SCSI adapter",
+ ahd_aic7901A_setup
+ },
+ {
+ ID_AIC7902 & ID_9005_GENERIC_MASK,
+ ID_9005_GENERIC_MASK,
+ "Adaptec AIC7902 Ultra320 SCSI adapter",
+ ahd_aic7902_setup
+ }
+};
+
+static const u_int ahd_num_pci_devs = ARRAY_SIZE(ahd_pci_ident_table);
+
+#define DEVCONFIG 0x40
+#define PCIXINITPAT 0x0000E000ul
+#define PCIXINIT_PCI33_66 0x0000E000ul
+#define PCIXINIT_PCIX50_66 0x0000C000ul
+#define PCIXINIT_PCIX66_100 0x0000A000ul
+#define PCIXINIT_PCIX100_133 0x00008000ul
+#define PCI_BUS_MODES_INDEX(devconfig) \
+ (((devconfig) & PCIXINITPAT) >> 13)
+static const char *pci_bus_modes[] =
+{
+ "PCI bus mode unknown",
+ "PCI bus mode unknown",
+ "PCI bus mode unknown",
+ "PCI bus mode unknown",
+ "PCI-X 101-133MHz",
+ "PCI-X 67-100MHz",
+ "PCI-X 50-66MHz",
+ "PCI 33 or 66MHz"
+};
+
+#define TESTMODE 0x00000800ul
+#define IRDY_RST 0x00000200ul
+#define FRAME_RST 0x00000100ul
+#define PCI64BIT 0x00000080ul
+#define MRDCEN 0x00000040ul
+#define ENDIANSEL 0x00000020ul
+#define MIXQWENDIANEN 0x00000008ul
+#define DACEN 0x00000004ul
+#define STPWLEVEL 0x00000002ul
+#define QWENDIANSEL 0x00000001ul
+
+#define DEVCONFIG1 0x44
+#define PREQDIS 0x01
+
+#define CSIZE_LATTIME 0x0c
+#define CACHESIZE 0x000000fful
+#define LATTIME 0x0000ff00ul
+
+static int ahd_check_extport(struct ahd_softc *ahd);
+static void ahd_configure_termination(struct ahd_softc *ahd,
+ u_int adapter_control);
+static void ahd_pci_split_intr(struct ahd_softc *ahd, u_int intstat);
+static void ahd_pci_intr(struct ahd_softc *ahd);
+
+const struct ahd_pci_identity *
+ahd_find_pci_device(ahd_dev_softc_t pci)
+{
+ uint64_t full_id;
+ uint16_t device;
+ uint16_t vendor;
+ uint16_t subdevice;
+ uint16_t subvendor;
+ const struct ahd_pci_identity *entry;
+ u_int i;
+
+ vendor = ahd_pci_read_config(pci, PCIR_DEVVENDOR, /*bytes*/2);
+ device = ahd_pci_read_config(pci, PCIR_DEVICE, /*bytes*/2);
+ subvendor = ahd_pci_read_config(pci, PCIR_SUBVEND_0, /*bytes*/2);
+ subdevice = ahd_pci_read_config(pci, PCIR_SUBDEV_0, /*bytes*/2);
+ full_id = ahd_compose_id(device,
+ vendor,
+ subdevice,
+ subvendor);
+
+ /*
+ * Controllers, mask out the IROC/HostRAID bit
+ */
+
+ full_id &= ID_ALL_IROC_MASK;
+
+ for (i = 0; i < ahd_num_pci_devs; i++) {
+ entry = &ahd_pci_ident_table[i];
+ if (entry->full_id == (full_id & entry->id_mask)) {
+ /* Honor exclusion entries. */
+ if (entry->name == NULL)
+ return (NULL);
+ return (entry);
+ }
+ }
+ return (NULL);
+}
+
+int
+ahd_pci_config(struct ahd_softc *ahd, const struct ahd_pci_identity *entry)
+{
+ struct scb_data *shared_scb_data;
+ u_int command;
+ uint32_t devconfig;
+ uint16_t subvendor;
+ int error;
+
+ shared_scb_data = NULL;
+ ahd->description = entry->name;
+ /*
+ * Record if this is an HP board.
+ */
+ subvendor = ahd_pci_read_config(ahd->dev_softc,
+ PCIR_SUBVEND_0, /*bytes*/2);
+ if (subvendor == SUBID_HP)
+ ahd->flags |= AHD_HP_BOARD;
+
+ error = entry->setup(ahd);
+ if (error != 0)
+ return (error);
+
+ devconfig = ahd_pci_read_config(ahd->dev_softc, DEVCONFIG, /*bytes*/4);
+ if ((devconfig & PCIXINITPAT) == PCIXINIT_PCI33_66) {
+ ahd->chip |= AHD_PCI;
+ /* Disable PCIX workarounds when running in PCI mode. */
+ ahd->bugs &= ~AHD_PCIX_BUG_MASK;
+ } else {
+ ahd->chip |= AHD_PCIX;
+ }
+ ahd->bus_description = pci_bus_modes[PCI_BUS_MODES_INDEX(devconfig)];
+
+ ahd_power_state_change(ahd, AHD_POWER_STATE_D0);
+
+ error = ahd_pci_map_registers(ahd);
+ if (error != 0)
+ return (error);
+
+ /*
+ * If we need to support high memory, enable dual
+ * address cycles. This bit must be set to enable
+ * high address bit generation even if we are on a
+ * 64bit bus (PCI64BIT set in devconfig).
+ */
+ if ((ahd->flags & (AHD_39BIT_ADDRESSING|AHD_64BIT_ADDRESSING)) != 0) {
+ if (bootverbose)
+ printk("%s: Enabling 39Bit Addressing\n",
+ ahd_name(ahd));
+ devconfig = ahd_pci_read_config(ahd->dev_softc,
+ DEVCONFIG, /*bytes*/4);
+ devconfig |= DACEN;
+ ahd_pci_write_config(ahd->dev_softc, DEVCONFIG,
+ devconfig, /*bytes*/4);
+ }
+
+ /* Ensure busmastering is enabled */
+ command = ahd_pci_read_config(ahd->dev_softc, PCIR_COMMAND, /*bytes*/2);
+ command |= PCIM_CMD_BUSMASTEREN;
+ ahd_pci_write_config(ahd->dev_softc, PCIR_COMMAND, command, /*bytes*/2);
+
+ error = ahd_softc_init(ahd);
+ if (error != 0)
+ return (error);
+
+ ahd->bus_intr = ahd_pci_intr;
+
+ error = ahd_reset(ahd, /*reinit*/FALSE);
+ if (error != 0)
+ return (ENXIO);
+
+ ahd->pci_cachesize =
+ ahd_pci_read_config(ahd->dev_softc, CSIZE_LATTIME,
+ /*bytes*/1) & CACHESIZE;
+ ahd->pci_cachesize *= 4;
+
+ ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
+ /* See if we have a SEEPROM and perform auto-term */
+ error = ahd_check_extport(ahd);
+ if (error != 0)
+ return (error);
+
+ /* Core initialization */
+ error = ahd_init(ahd);
+ if (error != 0)
+ return (error);
+ ahd->init_level++;
+
+ /*
+ * Allow interrupts now that we are completely setup.
+ */
+ return ahd_pci_map_int(ahd);
+}
+
+#ifdef CONFIG_PM
+void
+ahd_pci_suspend(struct ahd_softc *ahd)
+{
+ /*
+ * Save chip register configuration data for chip resets
+ * that occur during runtime and resume events.
+ */
+ ahd->suspend_state.pci_state.devconfig =
+ ahd_pci_read_config(ahd->dev_softc, DEVCONFIG, /*bytes*/4);
+ ahd->suspend_state.pci_state.command =
+ ahd_pci_read_config(ahd->dev_softc, PCIR_COMMAND, /*bytes*/1);
+ ahd->suspend_state.pci_state.csize_lattime =
+ ahd_pci_read_config(ahd->dev_softc, CSIZE_LATTIME, /*bytes*/1);
+
+}
+
+void
+ahd_pci_resume(struct ahd_softc *ahd)
+{
+ ahd_pci_write_config(ahd->dev_softc, DEVCONFIG,
+ ahd->suspend_state.pci_state.devconfig, /*bytes*/4);
+ ahd_pci_write_config(ahd->dev_softc, PCIR_COMMAND,
+ ahd->suspend_state.pci_state.command, /*bytes*/1);
+ ahd_pci_write_config(ahd->dev_softc, CSIZE_LATTIME,
+ ahd->suspend_state.pci_state.csize_lattime, /*bytes*/1);
+}
+#endif
+
+/*
+ * Perform some simple tests that should catch situations where
+ * our registers are invalidly mapped.
+ */
+int
+ahd_pci_test_register_access(struct ahd_softc *ahd)
+{
+ uint32_t cmd;
+ u_int targpcistat;
+ u_int pci_status1;
+ int error;
+ uint8_t hcntrl;
+
+ error = EIO;
+
+ /*
+ * Enable PCI error interrupt status, but suppress NMIs
+ * generated by SERR raised due to target aborts.
+ */
+ cmd = ahd_pci_read_config(ahd->dev_softc, PCIR_COMMAND, /*bytes*/2);
+ ahd_pci_write_config(ahd->dev_softc, PCIR_COMMAND,
+ cmd & ~PCIM_CMD_SERRESPEN, /*bytes*/2);
+
+ /*
+ * First a simple test to see if any
+ * registers can be read. Reading
+ * HCNTRL has no side effects and has
+ * at least one bit that is guaranteed to
+ * be zero so it is a good register to
+ * use for this test.
+ */
+ hcntrl = ahd_inb(ahd, HCNTRL);
+ if (hcntrl == 0xFF)
+ goto fail;
+
+ /*
+ * Next create a situation where write combining
+ * or read prefetching could be initiated by the
+ * CPU or host bridge. Our device does not support
+ * either, so look for data corruption and/or flaged
+ * PCI errors. First pause without causing another
+ * chip reset.
+ */
+ hcntrl &= ~CHIPRST;
+ ahd_outb(ahd, HCNTRL, hcntrl|PAUSE);
+ while (ahd_is_paused(ahd) == 0)
+ ;
+
+ /* Clear any PCI errors that occurred before our driver attached. */
+ ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
+ targpcistat = ahd_inb(ahd, TARGPCISTAT);
+ ahd_outb(ahd, TARGPCISTAT, targpcistat);
+ pci_status1 = ahd_pci_read_config(ahd->dev_softc,
+ PCIR_STATUS + 1, /*bytes*/1);
+ ahd_pci_write_config(ahd->dev_softc, PCIR_STATUS + 1,
+ pci_status1, /*bytes*/1);
+ ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
+ ahd_outb(ahd, CLRINT, CLRPCIINT);
+
+ ahd_outb(ahd, SEQCTL0, PERRORDIS);
+ ahd_outl(ahd, SRAM_BASE, 0x5aa555aa);
+ if (ahd_inl(ahd, SRAM_BASE) != 0x5aa555aa)
+ goto fail;
+
+ if ((ahd_inb(ahd, INTSTAT) & PCIINT) != 0) {
+ ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
+ targpcistat = ahd_inb(ahd, TARGPCISTAT);
+ if ((targpcistat & STA) != 0)
+ goto fail;
+ }
+
+ error = 0;
+
+fail:
+ if ((ahd_inb(ahd, INTSTAT) & PCIINT) != 0) {
+
+ ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
+ targpcistat = ahd_inb(ahd, TARGPCISTAT);
+
+ /* Silently clear any latched errors. */
+ ahd_outb(ahd, TARGPCISTAT, targpcistat);
+ pci_status1 = ahd_pci_read_config(ahd->dev_softc,
+ PCIR_STATUS + 1, /*bytes*/1);
+ ahd_pci_write_config(ahd->dev_softc, PCIR_STATUS + 1,
+ pci_status1, /*bytes*/1);
+ ahd_outb(ahd, CLRINT, CLRPCIINT);
+ }
+ ahd_outb(ahd, SEQCTL0, PERRORDIS|FAILDIS);
+ ahd_pci_write_config(ahd->dev_softc, PCIR_COMMAND, cmd, /*bytes*/2);
+ return (error);
+}
+
+/*
+ * Check the external port logic for a serial eeprom
+ * and termination/cable detection contrls.
+ */
+static int
+ahd_check_extport(struct ahd_softc *ahd)
+{
+ struct vpd_config vpd;
+ struct seeprom_config *sc;
+ u_int adapter_control;
+ int have_seeprom;
+ int error;
+
+ sc = ahd->seep_config;
+ have_seeprom = ahd_acquire_seeprom(ahd);
+ if (have_seeprom) {
+ u_int start_addr;
+
+ /*
+ * Fetch VPD for this function and parse it.
+ */
+ if (bootverbose)
+ printk("%s: Reading VPD from SEEPROM...",
+ ahd_name(ahd));
+
+ /* Address is always in units of 16bit words */
+ start_addr = ((2 * sizeof(*sc))
+ + (sizeof(vpd) * (ahd->channel - 'A'))) / 2;
+
+ error = ahd_read_seeprom(ahd, (uint16_t *)&vpd,
+ start_addr, sizeof(vpd)/2,
+ /*bytestream*/TRUE);
+ if (error == 0)
+ error = ahd_parse_vpddata(ahd, &vpd);
+ if (bootverbose)
+ printk("%s: VPD parsing %s\n",
+ ahd_name(ahd),
+ error == 0 ? "successful" : "failed");
+
+ if (bootverbose)
+ printk("%s: Reading SEEPROM...", ahd_name(ahd));
+
+ /* Address is always in units of 16bit words */
+ start_addr = (sizeof(*sc) / 2) * (ahd->channel - 'A');
+
+ error = ahd_read_seeprom(ahd, (uint16_t *)sc,
+ start_addr, sizeof(*sc)/2,
+ /*bytestream*/FALSE);
+
+ if (error != 0) {
+ printk("Unable to read SEEPROM\n");
+ have_seeprom = 0;
+ } else {
+ have_seeprom = ahd_verify_cksum(sc);
+
+ if (bootverbose) {
+ if (have_seeprom == 0)
+ printk ("checksum error\n");
+ else
+ printk ("done.\n");
+ }
+ }
+ ahd_release_seeprom(ahd);
+ }
+
+ if (!have_seeprom) {
+ u_int nvram_scb;
+
+ /*
+ * Pull scratch ram settings and treat them as
+ * if they are the contents of an seeprom if
+ * the 'ADPT', 'BIOS', or 'ASPI' signature is found
+ * in SCB 0xFF. We manually compose the data as 16bit
+ * values to avoid endian issues.
+ */
+ ahd_set_scbptr(ahd, 0xFF);
+ nvram_scb = ahd_inb_scbram(ahd, SCB_BASE + NVRAM_SCB_OFFSET);
+ if (nvram_scb != 0xFF
+ && ((ahd_inb_scbram(ahd, SCB_BASE + 0) == 'A'
+ && ahd_inb_scbram(ahd, SCB_BASE + 1) == 'D'
+ && ahd_inb_scbram(ahd, SCB_BASE + 2) == 'P'
+ && ahd_inb_scbram(ahd, SCB_BASE + 3) == 'T')
+ || (ahd_inb_scbram(ahd, SCB_BASE + 0) == 'B'
+ && ahd_inb_scbram(ahd, SCB_BASE + 1) == 'I'
+ && ahd_inb_scbram(ahd, SCB_BASE + 2) == 'O'
+ && ahd_inb_scbram(ahd, SCB_BASE + 3) == 'S')
+ || (ahd_inb_scbram(ahd, SCB_BASE + 0) == 'A'
+ && ahd_inb_scbram(ahd, SCB_BASE + 1) == 'S'
+ && ahd_inb_scbram(ahd, SCB_BASE + 2) == 'P'
+ && ahd_inb_scbram(ahd, SCB_BASE + 3) == 'I'))) {
+ uint16_t *sc_data;
+ int i;
+
+ ahd_set_scbptr(ahd, nvram_scb);
+ sc_data = (uint16_t *)sc;
+ for (i = 0; i < 64; i += 2)
+ *sc_data++ = ahd_inw_scbram(ahd, SCB_BASE+i);
+ have_seeprom = ahd_verify_cksum(sc);
+ if (have_seeprom)
+ ahd->flags |= AHD_SCB_CONFIG_USED;
+ }
+ }
+
+#ifdef AHD_DEBUG
+ if (have_seeprom != 0
+ && (ahd_debug & AHD_DUMP_SEEPROM) != 0) {
+ uint16_t *sc_data;
+ int i;
+
+ printk("%s: Seeprom Contents:", ahd_name(ahd));
+ sc_data = (uint16_t *)sc;
+ for (i = 0; i < (sizeof(*sc)); i += 2)
+ printk("\n\t0x%.4x", sc_data[i]);
+ printk("\n");
+ }
+#endif
+
+ if (!have_seeprom) {
+ if (bootverbose)
+ printk("%s: No SEEPROM available.\n", ahd_name(ahd));
+ ahd->flags |= AHD_USEDEFAULTS;
+ error = ahd_default_config(ahd);
+ adapter_control = CFAUTOTERM|CFSEAUTOTERM;
+ kfree(ahd->seep_config);
+ ahd->seep_config = NULL;
+ } else {
+ error = ahd_parse_cfgdata(ahd, sc);
+ adapter_control = sc->adapter_control;
+ }
+ if (error != 0)
+ return (error);
+
+ ahd_configure_termination(ahd, adapter_control);
+
+ return (0);
+}
+
+static void
+ahd_configure_termination(struct ahd_softc *ahd, u_int adapter_control)
+{
+ int error;
+ u_int sxfrctl1;
+ uint8_t termctl;
+ uint32_t devconfig;
+
+ devconfig = ahd_pci_read_config(ahd->dev_softc, DEVCONFIG, /*bytes*/4);
+ devconfig &= ~STPWLEVEL;
+ if ((ahd->flags & AHD_STPWLEVEL_A) != 0)
+ devconfig |= STPWLEVEL;
+ if (bootverbose)
+ printk("%s: STPWLEVEL is %s\n",
+ ahd_name(ahd), (devconfig & STPWLEVEL) ? "on" : "off");
+ ahd_pci_write_config(ahd->dev_softc, DEVCONFIG, devconfig, /*bytes*/4);
+
+ /* Make sure current sensing is off. */
+ if ((ahd->flags & AHD_CURRENT_SENSING) != 0) {
+ (void)ahd_write_flexport(ahd, FLXADDR_ROMSTAT_CURSENSECTL, 0);
+ }
+
+ /*
+ * Read to sense. Write to set.
+ */
+ error = ahd_read_flexport(ahd, FLXADDR_TERMCTL, &termctl);
+ if ((adapter_control & CFAUTOTERM) == 0) {
+ if (bootverbose)
+ printk("%s: Manual Primary Termination\n",
+ ahd_name(ahd));
+ termctl &= ~(FLX_TERMCTL_ENPRILOW|FLX_TERMCTL_ENPRIHIGH);
+ if ((adapter_control & CFSTERM) != 0)
+ termctl |= FLX_TERMCTL_ENPRILOW;
+ if ((adapter_control & CFWSTERM) != 0)
+ termctl |= FLX_TERMCTL_ENPRIHIGH;
+ } else if (error != 0) {
+ printk("%s: Primary Auto-Term Sensing failed! "
+ "Using Defaults.\n", ahd_name(ahd));
+ termctl = FLX_TERMCTL_ENPRILOW|FLX_TERMCTL_ENPRIHIGH;
+ }
+
+ if ((adapter_control & CFSEAUTOTERM) == 0) {
+ if (bootverbose)
+ printk("%s: Manual Secondary Termination\n",
+ ahd_name(ahd));
+ termctl &= ~(FLX_TERMCTL_ENSECLOW|FLX_TERMCTL_ENSECHIGH);
+ if ((adapter_control & CFSELOWTERM) != 0)
+ termctl |= FLX_TERMCTL_ENSECLOW;
+ if ((adapter_control & CFSEHIGHTERM) != 0)
+ termctl |= FLX_TERMCTL_ENSECHIGH;
+ } else if (error != 0) {
+ printk("%s: Secondary Auto-Term Sensing failed! "
+ "Using Defaults.\n", ahd_name(ahd));
+ termctl |= FLX_TERMCTL_ENSECLOW|FLX_TERMCTL_ENSECHIGH;
+ }
+
+ /*
+ * Now set the termination based on what we found.
+ */
+ sxfrctl1 = ahd_inb(ahd, SXFRCTL1) & ~STPWEN;
+ ahd->flags &= ~AHD_TERM_ENB_A;
+ if ((termctl & FLX_TERMCTL_ENPRILOW) != 0) {
+ ahd->flags |= AHD_TERM_ENB_A;
+ sxfrctl1 |= STPWEN;
+ }
+ /* Must set the latch once in order to be effective. */
+ ahd_outb(ahd, SXFRCTL1, sxfrctl1|STPWEN);
+ ahd_outb(ahd, SXFRCTL1, sxfrctl1);
+
+ error = ahd_write_flexport(ahd, FLXADDR_TERMCTL, termctl);
+ if (error != 0) {
+ printk("%s: Unable to set termination settings!\n",
+ ahd_name(ahd));
+ } else if (bootverbose) {
+ printk("%s: Primary High byte termination %sabled\n",
+ ahd_name(ahd),
+ (termctl & FLX_TERMCTL_ENPRIHIGH) ? "En" : "Dis");
+
+ printk("%s: Primary Low byte termination %sabled\n",
+ ahd_name(ahd),
+ (termctl & FLX_TERMCTL_ENPRILOW) ? "En" : "Dis");
+
+ printk("%s: Secondary High byte termination %sabled\n",
+ ahd_name(ahd),
+ (termctl & FLX_TERMCTL_ENSECHIGH) ? "En" : "Dis");
+
+ printk("%s: Secondary Low byte termination %sabled\n",
+ ahd_name(ahd),
+ (termctl & FLX_TERMCTL_ENSECLOW) ? "En" : "Dis");
+ }
+ return;
+}
+
+#define DPE 0x80
+#define SSE 0x40
+#define RMA 0x20
+#define RTA 0x10
+#define STA 0x08
+#define DPR 0x01
+
+static const char *split_status_source[] =
+{
+ "DFF0",
+ "DFF1",
+ "OVLY",
+ "CMC",
+};
+
+static const char *pci_status_source[] =
+{
+ "DFF0",
+ "DFF1",
+ "SG",
+ "CMC",
+ "OVLY",
+ "NONE",
+ "MSI",
+ "TARG"
+};
+
+static const char *split_status_strings[] =
+{
+ "%s: Received split response in %s.\n",
+ "%s: Received split completion error message in %s\n",
+ "%s: Receive overrun in %s\n",
+ "%s: Count not complete in %s\n",
+ "%s: Split completion data bucket in %s\n",
+ "%s: Split completion address error in %s\n",
+ "%s: Split completion byte count error in %s\n",
+ "%s: Signaled Target-abort to early terminate a split in %s\n"
+};
+
+static const char *pci_status_strings[] =
+{
+ "%s: Data Parity Error has been reported via PERR# in %s\n",
+ "%s: Target initial wait state error in %s\n",
+ "%s: Split completion read data parity error in %s\n",
+ "%s: Split completion address attribute parity error in %s\n",
+ "%s: Received a Target Abort in %s\n",
+ "%s: Received a Master Abort in %s\n",
+ "%s: Signal System Error Detected in %s\n",
+ "%s: Address or Write Phase Parity Error Detected in %s.\n"
+};
+
+static void
+ahd_pci_intr(struct ahd_softc *ahd)
+{
+ uint8_t pci_status[8];
+ ahd_mode_state saved_modes;
+ u_int pci_status1;
+ u_int intstat;
+ u_int i;
+ u_int reg;
+
+ intstat = ahd_inb(ahd, INTSTAT);
+
+ if ((intstat & SPLTINT) != 0)
+ ahd_pci_split_intr(ahd, intstat);
+
+ if ((intstat & PCIINT) == 0)
+ return;
+
+ printk("%s: PCI error Interrupt\n", ahd_name(ahd));
+ saved_modes = ahd_save_modes(ahd);
+ ahd_dump_card_state(ahd);
+ ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG);
+ for (i = 0, reg = DF0PCISTAT; i < 8; i++, reg++) {
+
+ if (i == 5)
+ continue;
+ pci_status[i] = ahd_inb(ahd, reg);
+ /* Clear latched errors. So our interrupt deasserts. */
+ ahd_outb(ahd, reg, pci_status[i]);
+ }
+
+ for (i = 0; i < 8; i++) {
+ u_int bit;
+
+ if (i == 5)
+ continue;
+
+ for (bit = 0; bit < 8; bit++) {
+
+ if ((pci_status[i] & (0x1 << bit)) != 0) {
+ const char *s;
+
+ s = pci_status_strings[bit];
+ if (i == 7/*TARG*/ && bit == 3)
+ s = "%s: Signaled Target Abort\n";
+ printk(s, ahd_name(ahd), pci_status_source[i]);
+ }
+ }
+ }
+ pci_status1 = ahd_pci_read_config(ahd->dev_softc,
+ PCIR_STATUS + 1, /*bytes*/1);
+ ahd_pci_write_config(ahd->dev_softc, PCIR_STATUS + 1,
+ pci_status1, /*bytes*/1);
+ ahd_restore_modes(ahd, saved_modes);
+ ahd_outb(ahd, CLRINT, CLRPCIINT);
+ ahd_unpause(ahd);
+}
+
+static void
+ahd_pci_split_intr(struct ahd_softc *ahd, u_int intstat)
+{
+ uint8_t split_status[4];
+ uint8_t split_status1[4];
+ uint8_t sg_split_status[2];
+ uint8_t sg_split_status1[2];
+ ahd_mode_state saved_modes;
+ u_int i;
+ uint16_t pcix_status;
+
+ /*
+ * Check for splits in all modes. Modes 0 and 1
+ * additionally have SG engine splits to look at.
+ */
+ pcix_status = ahd_pci_read_config(ahd->dev_softc, PCIXR_STATUS,
+ /*bytes*/2);
+ printk("%s: PCI Split Interrupt - PCI-X status = 0x%x\n",
+ ahd_name(ahd), pcix_status);
+ saved_modes = ahd_save_modes(ahd);
+ for (i = 0; i < 4; i++) {
+ ahd_set_modes(ahd, i, i);
+
+ split_status[i] = ahd_inb(ahd, DCHSPLTSTAT0);
+ split_status1[i] = ahd_inb(ahd, DCHSPLTSTAT1);
+ /* Clear latched errors. So our interrupt deasserts. */
+ ahd_outb(ahd, DCHSPLTSTAT0, split_status[i]);
+ ahd_outb(ahd, DCHSPLTSTAT1, split_status1[i]);
+ if (i > 1)
+ continue;
+ sg_split_status[i] = ahd_inb(ahd, SGSPLTSTAT0);
+ sg_split_status1[i] = ahd_inb(ahd, SGSPLTSTAT1);
+ /* Clear latched errors. So our interrupt deasserts. */
+ ahd_outb(ahd, SGSPLTSTAT0, sg_split_status[i]);
+ ahd_outb(ahd, SGSPLTSTAT1, sg_split_status1[i]);
+ }
+
+ for (i = 0; i < 4; i++) {
+ u_int bit;
+
+ for (bit = 0; bit < 8; bit++) {
+
+ if ((split_status[i] & (0x1 << bit)) != 0)
+ printk(split_status_strings[bit], ahd_name(ahd),
+ split_status_source[i]);
+
+ if (i > 1)
+ continue;
+
+ if ((sg_split_status[i] & (0x1 << bit)) != 0)
+ printk(split_status_strings[bit], ahd_name(ahd), "SG");
+ }
+ }
+ /*
+ * Clear PCI-X status bits.
+ */
+ ahd_pci_write_config(ahd->dev_softc, PCIXR_STATUS,
+ pcix_status, /*bytes*/2);
+ ahd_outb(ahd, CLRINT, CLRSPLTINT);
+ ahd_restore_modes(ahd, saved_modes);
+}
+
+static int
+ahd_aic7901_setup(struct ahd_softc *ahd)
+{
+
+ ahd->chip = AHD_AIC7901;
+ ahd->features = AHD_AIC7901_FE;
+ return (ahd_aic790X_setup(ahd));
+}
+
+static int
+ahd_aic7901A_setup(struct ahd_softc *ahd)
+{
+
+ ahd->chip = AHD_AIC7901A;
+ ahd->features = AHD_AIC7901A_FE;
+ return (ahd_aic790X_setup(ahd));
+}
+
+static int
+ahd_aic7902_setup(struct ahd_softc *ahd)
+{
+ ahd->chip = AHD_AIC7902;
+ ahd->features = AHD_AIC7902_FE;
+ return (ahd_aic790X_setup(ahd));
+}
+
+static int
+ahd_aic790X_setup(struct ahd_softc *ahd)
+{
+ ahd_dev_softc_t pci;
+ u_int rev;
+
+ pci = ahd->dev_softc;
+ rev = ahd_pci_read_config(pci, PCIR_REVID, /*bytes*/1);
+ if (rev < ID_AIC7902_PCI_REV_A4) {
+ printk("%s: Unable to attach to unsupported chip revision %d\n",
+ ahd_name(ahd), rev);
+ ahd_pci_write_config(pci, PCIR_COMMAND, 0, /*bytes*/2);
+ return (ENXIO);
+ }
+ ahd->channel = ahd_get_pci_function(pci) + 'A';
+ if (rev < ID_AIC7902_PCI_REV_B0) {
+ /*
+ * Enable A series workarounds.
+ */
+ ahd->bugs |= AHD_SENT_SCB_UPDATE_BUG|AHD_ABORT_LQI_BUG
+ | AHD_PKT_BITBUCKET_BUG|AHD_LONG_SETIMO_BUG
+ | AHD_NLQICRC_DELAYED_BUG|AHD_SCSIRST_BUG
+ | AHD_LQO_ATNO_BUG|AHD_AUTOFLUSH_BUG
+ | AHD_CLRLQO_AUTOCLR_BUG|AHD_PCIX_MMAPIO_BUG
+ | AHD_PCIX_CHIPRST_BUG|AHD_PCIX_SCBRAM_RD_BUG
+ | AHD_PKTIZED_STATUS_BUG|AHD_PKT_LUN_BUG
+ | AHD_MDFF_WSCBPTR_BUG|AHD_REG_SLOW_SETTLE_BUG
+ | AHD_SET_MODE_BUG|AHD_BUSFREEREV_BUG
+ | AHD_NONPACKFIFO_BUG|AHD_PACED_NEGTABLE_BUG
+ | AHD_FAINT_LED_BUG;
+
+ /*
+ * IO Cell parameter setup.
+ */
+ AHD_SET_PRECOMP(ahd, AHD_PRECOMP_CUTBACK_29);
+
+ if ((ahd->flags & AHD_HP_BOARD) == 0)
+ AHD_SET_SLEWRATE(ahd, AHD_SLEWRATE_DEF_REVA);
+ } else {
+ /* This is revision B and newer. */
+ extern uint32_t aic79xx_slowcrc;
+ u_int devconfig1;
+
+ ahd->features |= AHD_RTI|AHD_NEW_IOCELL_OPTS
+ | AHD_NEW_DFCNTRL_OPTS|AHD_FAST_CDB_DELIVERY
+ | AHD_BUSFREEREV_BUG;
+ ahd->bugs |= AHD_LQOOVERRUN_BUG|AHD_EARLY_REQ_BUG;
+
+ /* If the user requested that the SLOWCRC bit to be set. */
+ if (aic79xx_slowcrc)
+ ahd->features |= AHD_AIC79XXB_SLOWCRC;
+
+ /*
+ * Some issues have been resolved in the 7901B.
+ */
+ if ((ahd->features & AHD_MULTI_FUNC) != 0)
+ ahd->bugs |= AHD_INTCOLLISION_BUG|AHD_ABORT_LQI_BUG;
+
+ /*
+ * IO Cell parameter setup.
+ */
+ AHD_SET_PRECOMP(ahd, AHD_PRECOMP_CUTBACK_29);
+ AHD_SET_SLEWRATE(ahd, AHD_SLEWRATE_DEF_REVB);
+ AHD_SET_AMPLITUDE(ahd, AHD_AMPLITUDE_DEF);
+
+ /*
+ * Set the PREQDIS bit for H2B which disables some workaround
+ * that doesn't work on regular PCI busses.
+ * XXX - Find out exactly what this does from the hardware
+ * folks!
+ */
+ devconfig1 = ahd_pci_read_config(pci, DEVCONFIG1, /*bytes*/1);
+ ahd_pci_write_config(pci, DEVCONFIG1,
+ devconfig1|PREQDIS, /*bytes*/1);
+ devconfig1 = ahd_pci_read_config(pci, DEVCONFIG1, /*bytes*/1);
+ }
+
+ return (0);
+}