diff options
Diffstat (limited to 'kernel/drivers/scsi/advansys.c')
| -rw-r--r-- | kernel/drivers/scsi/advansys.c | 12322 |
1 files changed, 12322 insertions, 0 deletions
diff --git a/kernel/drivers/scsi/advansys.c b/kernel/drivers/scsi/advansys.c new file mode 100644 index 000000000..ae95e347f --- /dev/null +++ b/kernel/drivers/scsi/advansys.c @@ -0,0 +1,12322 @@ +#define DRV_NAME "advansys" +#define ASC_VERSION "3.4" /* AdvanSys Driver Version */ + +/* + * advansys.c - Linux Host Driver for AdvanSys SCSI Adapters + * + * Copyright (c) 1995-2000 Advanced System Products, Inc. + * Copyright (c) 2000-2001 ConnectCom Solutions, Inc. + * Copyright (c) 2007 Matthew Wilcox <matthew@wil.cx> + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/* + * As of March 8, 2000 Advanced System Products, Inc. (AdvanSys) + * changed its name to ConnectCom Solutions, Inc. + * On June 18, 2001 Initio Corp. acquired ConnectCom's SCSI assets + */ + +#include <linux/module.h> +#include <linux/string.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/mm.h> +#include <linux/proc_fs.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/isa.h> +#include <linux/eisa.h> +#include <linux/pci.h> +#include <linux/spinlock.h> +#include <linux/dma-mapping.h> +#include <linux/firmware.h> + +#include <asm/io.h> +#include <asm/dma.h> + +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_tcq.h> +#include <scsi/scsi.h> +#include <scsi/scsi_host.h> + +/* FIXME: + * + * 1. Although all of the necessary command mapping places have the + * appropriate dma_map.. APIs, the driver still processes its internal + * queue using bus_to_virt() and virt_to_bus() which are illegal under + * the API. The entire queue processing structure will need to be + * altered to fix this. + * 2. Need to add memory mapping workaround. Test the memory mapping. + * If it doesn't work revert to I/O port access. Can a test be done + * safely? + * 3. Handle an interrupt not working. Keep an interrupt counter in + * the interrupt handler. In the timeout function if the interrupt + * has not occurred then print a message and run in polled mode. + * 4. Need to add support for target mode commands, cf. CAM XPT. + * 5. check DMA mapping functions for failure + * 6. Use scsi_transport_spi + * 7. advansys_info is not safe against multiple simultaneous callers + * 8. Add module_param to override ISA/VLB ioport array + */ +#warning this driver is still not properly converted to the DMA API + +/* Enable driver /proc statistics. */ +#define ADVANSYS_STATS + +/* Enable driver tracing. */ +#undef ADVANSYS_DEBUG + +/* + * Portable Data Types + * + * Any instance where a 32-bit long or pointer type is assumed + * for precision or HW defined structures, the following define + * types must be used. In Linux the char, short, and int types + * are all consistent at 8, 16, and 32 bits respectively. Pointers + * and long types are 64 bits on Alpha and UltraSPARC. + */ +#define ASC_PADDR __u32 /* Physical/Bus address data type. */ +#define ASC_VADDR __u32 /* Virtual address data type. */ +#define ASC_DCNT __u32 /* Unsigned Data count type. */ +#define ASC_SDCNT __s32 /* Signed Data count type. */ + +typedef unsigned char uchar; + +#ifndef TRUE +#define TRUE (1) +#endif +#ifndef FALSE +#define FALSE (0) +#endif + +#define ERR (-1) +#define UW_ERR (uint)(0xFFFF) +#define isodd_word(val) ((((uint)val) & (uint)0x0001) != 0) + +#define PCI_VENDOR_ID_ASP 0x10cd +#define PCI_DEVICE_ID_ASP_1200A 0x1100 +#define PCI_DEVICE_ID_ASP_ABP940 0x1200 +#define PCI_DEVICE_ID_ASP_ABP940U 0x1300 +#define PCI_DEVICE_ID_ASP_ABP940UW 0x2300 +#define PCI_DEVICE_ID_38C0800_REV1 0x2500 +#define PCI_DEVICE_ID_38C1600_REV1 0x2700 + +/* + * Enable CC_VERY_LONG_SG_LIST to support up to 64K element SG lists. + * The SRB structure will have to be changed and the ASC_SRB2SCSIQ() + * macro re-defined to be able to obtain a ASC_SCSI_Q pointer from the + * SRB structure. + */ +#define CC_VERY_LONG_SG_LIST 0 +#define ASC_SRB2SCSIQ(srb_ptr) (srb_ptr) + +#define PortAddr unsigned int /* port address size */ +#define inp(port) inb(port) +#define outp(port, byte) outb((byte), (port)) + +#define inpw(port) inw(port) +#define outpw(port, word) outw((word), (port)) + +#define ASC_MAX_SG_QUEUE 7 +#define ASC_MAX_SG_LIST 255 + +#define ASC_CS_TYPE unsigned short + +#define ASC_IS_ISA (0x0001) +#define ASC_IS_ISAPNP (0x0081) +#define ASC_IS_EISA (0x0002) +#define ASC_IS_PCI (0x0004) +#define ASC_IS_PCI_ULTRA (0x0104) +#define ASC_IS_PCMCIA (0x0008) +#define ASC_IS_MCA (0x0020) +#define ASC_IS_VL (0x0040) +#define ASC_IS_WIDESCSI_16 (0x0100) +#define ASC_IS_WIDESCSI_32 (0x0200) +#define ASC_IS_BIG_ENDIAN (0x8000) + +#define ASC_CHIP_MIN_VER_VL (0x01) +#define ASC_CHIP_MAX_VER_VL (0x07) +#define ASC_CHIP_MIN_VER_PCI (0x09) +#define ASC_CHIP_MAX_VER_PCI (0x0F) +#define ASC_CHIP_VER_PCI_BIT (0x08) +#define ASC_CHIP_MIN_VER_ISA (0x11) +#define ASC_CHIP_MIN_VER_ISA_PNP (0x21) +#define ASC_CHIP_MAX_VER_ISA (0x27) +#define ASC_CHIP_VER_ISA_BIT (0x30) +#define ASC_CHIP_VER_ISAPNP_BIT (0x20) +#define ASC_CHIP_VER_ASYN_BUG (0x21) +#define ASC_CHIP_VER_PCI 0x08 +#define ASC_CHIP_VER_PCI_ULTRA_3150 (ASC_CHIP_VER_PCI | 0x02) +#define ASC_CHIP_VER_PCI_ULTRA_3050 (ASC_CHIP_VER_PCI | 0x03) +#define ASC_CHIP_MIN_VER_EISA (0x41) +#define ASC_CHIP_MAX_VER_EISA (0x47) +#define ASC_CHIP_VER_EISA_BIT (0x40) +#define ASC_CHIP_LATEST_VER_EISA ((ASC_CHIP_MIN_VER_EISA - 1) + 3) +#define ASC_MAX_VL_DMA_COUNT (0x07FFFFFFL) +#define ASC_MAX_PCI_DMA_COUNT (0xFFFFFFFFL) +#define ASC_MAX_ISA_DMA_COUNT (0x00FFFFFFL) + +#define ASC_SCSI_ID_BITS 3 +#define ASC_SCSI_TIX_TYPE uchar +#define ASC_ALL_DEVICE_BIT_SET 0xFF +#define ASC_SCSI_BIT_ID_TYPE uchar +#define ASC_MAX_TID 7 +#define ASC_MAX_LUN 7 +#define ASC_SCSI_WIDTH_BIT_SET 0xFF +#define ASC_MAX_SENSE_LEN 32 +#define ASC_MIN_SENSE_LEN 14 +#define ASC_SCSI_RESET_HOLD_TIME_US 60 + +/* + * Narrow boards only support 12-byte commands, while wide boards + * extend to 16-byte commands. + */ +#define ASC_MAX_CDB_LEN 12 +#define ADV_MAX_CDB_LEN 16 + +#define MS_SDTR_LEN 0x03 +#define MS_WDTR_LEN 0x02 + +#define ASC_SG_LIST_PER_Q 7 +#define QS_FREE 0x00 +#define QS_READY 0x01 +#define QS_DISC1 0x02 +#define QS_DISC2 0x04 +#define QS_BUSY 0x08 +#define QS_ABORTED 0x40 +#define QS_DONE 0x80 +#define QC_NO_CALLBACK 0x01 +#define QC_SG_SWAP_QUEUE 0x02 +#define QC_SG_HEAD 0x04 +#define QC_DATA_IN 0x08 +#define QC_DATA_OUT 0x10 +#define QC_URGENT 0x20 +#define QC_MSG_OUT 0x40 +#define QC_REQ_SENSE 0x80 +#define QCSG_SG_XFER_LIST 0x02 +#define QCSG_SG_XFER_MORE 0x04 +#define QCSG_SG_XFER_END 0x08 +#define QD_IN_PROGRESS 0x00 +#define QD_NO_ERROR 0x01 +#define QD_ABORTED_BY_HOST 0x02 +#define QD_WITH_ERROR 0x04 +#define QD_INVALID_REQUEST 0x80 +#define QD_INVALID_HOST_NUM 0x81 +#define QD_INVALID_DEVICE 0x82 +#define QD_ERR_INTERNAL 0xFF +#define QHSTA_NO_ERROR 0x00 +#define QHSTA_M_SEL_TIMEOUT 0x11 +#define QHSTA_M_DATA_OVER_RUN 0x12 +#define QHSTA_M_DATA_UNDER_RUN 0x12 +#define QHSTA_M_UNEXPECTED_BUS_FREE 0x13 +#define QHSTA_M_BAD_BUS_PHASE_SEQ 0x14 +#define QHSTA_D_QDONE_SG_LIST_CORRUPTED 0x21 +#define QHSTA_D_ASC_DVC_ERROR_CODE_SET 0x22 +#define QHSTA_D_HOST_ABORT_FAILED 0x23 +#define QHSTA_D_EXE_SCSI_Q_FAILED 0x24 +#define QHSTA_D_EXE_SCSI_Q_BUSY_TIMEOUT 0x25 +#define QHSTA_D_ASPI_NO_BUF_POOL 0x26 +#define QHSTA_M_WTM_TIMEOUT 0x41 +#define QHSTA_M_BAD_CMPL_STATUS_IN 0x42 +#define QHSTA_M_NO_AUTO_REQ_SENSE 0x43 +#define QHSTA_M_AUTO_REQ_SENSE_FAIL 0x44 +#define QHSTA_M_TARGET_STATUS_BUSY 0x45 +#define QHSTA_M_BAD_TAG_CODE 0x46 +#define QHSTA_M_BAD_QUEUE_FULL_OR_BUSY 0x47 +#define QHSTA_M_HUNG_REQ_SCSI_BUS_RESET 0x48 +#define QHSTA_D_LRAM_CMP_ERROR 0x81 +#define QHSTA_M_MICRO_CODE_ERROR_HALT 0xA1 +#define ASC_FLAG_SCSIQ_REQ 0x01 +#define ASC_FLAG_BIOS_SCSIQ_REQ 0x02 +#define ASC_FLAG_BIOS_ASYNC_IO 0x04 +#define ASC_FLAG_SRB_LINEAR_ADDR 0x08 +#define ASC_FLAG_WIN16 0x10 +#define ASC_FLAG_WIN32 0x20 +#define ASC_FLAG_ISA_OVER_16MB 0x40 +#define ASC_FLAG_DOS_VM_CALLBACK 0x80 +#define ASC_TAG_FLAG_EXTRA_BYTES 0x10 +#define ASC_TAG_FLAG_DISABLE_DISCONNECT 0x04 +#define ASC_TAG_FLAG_DISABLE_ASYN_USE_SYN_FIX 0x08 +#define ASC_TAG_FLAG_DISABLE_CHK_COND_INT_HOST 0x40 +#define ASC_SCSIQ_CPY_BEG 4 +#define ASC_SCSIQ_SGHD_CPY_BEG 2 +#define ASC_SCSIQ_B_FWD 0 +#define ASC_SCSIQ_B_BWD 1 +#define ASC_SCSIQ_B_STATUS 2 +#define ASC_SCSIQ_B_QNO 3 +#define ASC_SCSIQ_B_CNTL 4 +#define ASC_SCSIQ_B_SG_QUEUE_CNT 5 +#define ASC_SCSIQ_D_DATA_ADDR 8 +#define ASC_SCSIQ_D_DATA_CNT 12 +#define ASC_SCSIQ_B_SENSE_LEN 20 +#define ASC_SCSIQ_DONE_INFO_BEG 22 +#define ASC_SCSIQ_D_SRBPTR 22 +#define ASC_SCSIQ_B_TARGET_IX 26 +#define ASC_SCSIQ_B_CDB_LEN 28 +#define ASC_SCSIQ_B_TAG_CODE 29 +#define ASC_SCSIQ_W_VM_ID 30 +#define ASC_SCSIQ_DONE_STATUS 32 +#define ASC_SCSIQ_HOST_STATUS 33 +#define ASC_SCSIQ_SCSI_STATUS 34 +#define ASC_SCSIQ_CDB_BEG 36 +#define ASC_SCSIQ_DW_REMAIN_XFER_ADDR 56 +#define ASC_SCSIQ_DW_REMAIN_XFER_CNT 60 +#define ASC_SCSIQ_B_FIRST_SG_WK_QP 48 +#define ASC_SCSIQ_B_SG_WK_QP 49 +#define ASC_SCSIQ_B_SG_WK_IX 50 +#define ASC_SCSIQ_W_ALT_DC1 52 +#define ASC_SCSIQ_B_LIST_CNT 6 +#define ASC_SCSIQ_B_CUR_LIST_CNT 7 +#define ASC_SGQ_B_SG_CNTL 4 +#define ASC_SGQ_B_SG_HEAD_QP 5 +#define ASC_SGQ_B_SG_LIST_CNT 6 +#define ASC_SGQ_B_SG_CUR_LIST_CNT 7 +#define ASC_SGQ_LIST_BEG 8 +#define ASC_DEF_SCSI1_QNG 4 +#define ASC_MAX_SCSI1_QNG 4 +#define ASC_DEF_SCSI2_QNG 16 +#define ASC_MAX_SCSI2_QNG 32 +#define ASC_TAG_CODE_MASK 0x23 +#define ASC_STOP_REQ_RISC_STOP 0x01 +#define ASC_STOP_ACK_RISC_STOP 0x03 +#define ASC_STOP_CLEAN_UP_BUSY_Q 0x10 +#define ASC_STOP_CLEAN_UP_DISC_Q 0x20 +#define ASC_STOP_HOST_REQ_RISC_HALT 0x40 +#define ASC_TIDLUN_TO_IX(tid, lun) (ASC_SCSI_TIX_TYPE)((tid) + ((lun)<<ASC_SCSI_ID_BITS)) +#define ASC_TID_TO_TARGET_ID(tid) (ASC_SCSI_BIT_ID_TYPE)(0x01 << (tid)) +#define ASC_TIX_TO_TARGET_ID(tix) (0x01 << ((tix) & ASC_MAX_TID)) +#define ASC_TIX_TO_TID(tix) ((tix) & ASC_MAX_TID) +#define ASC_TID_TO_TIX(tid) ((tid) & ASC_MAX_TID) +#define ASC_TIX_TO_LUN(tix) (((tix) >> ASC_SCSI_ID_BITS) & ASC_MAX_LUN) +#define ASC_QNO_TO_QADDR(q_no) ((ASC_QADR_BEG)+((int)(q_no) << 6)) + +typedef struct asc_scsiq_1 { + uchar status; + uchar q_no; + uchar cntl; + uchar sg_queue_cnt; + uchar target_id; + uchar target_lun; + ASC_PADDR data_addr; + ASC_DCNT data_cnt; + ASC_PADDR sense_addr; + uchar sense_len; + uchar extra_bytes; +} ASC_SCSIQ_1; + +typedef struct asc_scsiq_2 { + ASC_VADDR srb_ptr; + uchar target_ix; + uchar flag; + uchar cdb_len; + uchar tag_code; + ushort vm_id; +} ASC_SCSIQ_2; + +typedef struct asc_scsiq_3 { + uchar done_stat; + uchar host_stat; + uchar scsi_stat; + uchar scsi_msg; +} ASC_SCSIQ_3; + +typedef struct asc_scsiq_4 { + uchar cdb[ASC_MAX_CDB_LEN]; + uchar y_first_sg_list_qp; + uchar y_working_sg_qp; + uchar y_working_sg_ix; + uchar y_res; + ushort x_req_count; + ushort x_reconnect_rtn; + ASC_PADDR x_saved_data_addr; + ASC_DCNT x_saved_data_cnt; +} ASC_SCSIQ_4; + +typedef struct asc_q_done_info { + ASC_SCSIQ_2 d2; + ASC_SCSIQ_3 d3; + uchar q_status; + uchar q_no; + uchar cntl; + uchar sense_len; + uchar extra_bytes; + uchar res; + ASC_DCNT remain_bytes; +} ASC_QDONE_INFO; + +typedef struct asc_sg_list { + ASC_PADDR addr; + ASC_DCNT bytes; +} ASC_SG_LIST; + +typedef struct asc_sg_head { + ushort entry_cnt; + ushort queue_cnt; + ushort entry_to_copy; + ushort res; + ASC_SG_LIST sg_list[0]; +} ASC_SG_HEAD; + +typedef struct asc_scsi_q { + ASC_SCSIQ_1 q1; + ASC_SCSIQ_2 q2; + uchar *cdbptr; + ASC_SG_HEAD *sg_head; + ushort remain_sg_entry_cnt; + ushort next_sg_index; +} ASC_SCSI_Q; + +typedef struct asc_scsi_req_q { + ASC_SCSIQ_1 r1; + ASC_SCSIQ_2 r2; + uchar *cdbptr; + ASC_SG_HEAD *sg_head; + uchar *sense_ptr; + ASC_SCSIQ_3 r3; + uchar cdb[ASC_MAX_CDB_LEN]; + uchar sense[ASC_MIN_SENSE_LEN]; +} ASC_SCSI_REQ_Q; + +typedef struct asc_scsi_bios_req_q { + ASC_SCSIQ_1 r1; + ASC_SCSIQ_2 r2; + uchar *cdbptr; + ASC_SG_HEAD *sg_head; + uchar *sense_ptr; + ASC_SCSIQ_3 r3; + uchar cdb[ASC_MAX_CDB_LEN]; + uchar sense[ASC_MIN_SENSE_LEN]; +} ASC_SCSI_BIOS_REQ_Q; + +typedef struct asc_risc_q { + uchar fwd; + uchar bwd; + ASC_SCSIQ_1 i1; + ASC_SCSIQ_2 i2; + ASC_SCSIQ_3 i3; + ASC_SCSIQ_4 i4; +} ASC_RISC_Q; + +typedef struct asc_sg_list_q { + uchar seq_no; + uchar q_no; + uchar cntl; + uchar sg_head_qp; + uchar sg_list_cnt; + uchar sg_cur_list_cnt; +} ASC_SG_LIST_Q; + +typedef struct asc_risc_sg_list_q { + uchar fwd; + uchar bwd; + ASC_SG_LIST_Q sg; + ASC_SG_LIST sg_list[7]; +} ASC_RISC_SG_LIST_Q; + +#define ASCQ_ERR_Q_STATUS 0x0D +#define ASCQ_ERR_CUR_QNG 0x17 +#define ASCQ_ERR_SG_Q_LINKS 0x18 +#define ASCQ_ERR_ISR_RE_ENTRY 0x1A +#define ASCQ_ERR_CRITICAL_RE_ENTRY 0x1B +#define ASCQ_ERR_ISR_ON_CRITICAL 0x1C + +/* + * Warning code values are set in ASC_DVC_VAR 'warn_code'. + */ +#define ASC_WARN_NO_ERROR 0x0000 +#define ASC_WARN_IO_PORT_ROTATE 0x0001 +#define ASC_WARN_EEPROM_CHKSUM 0x0002 +#define ASC_WARN_IRQ_MODIFIED 0x0004 +#define ASC_WARN_AUTO_CONFIG 0x0008 +#define ASC_WARN_CMD_QNG_CONFLICT 0x0010 +#define ASC_WARN_EEPROM_RECOVER 0x0020 +#define ASC_WARN_CFG_MSW_RECOVER 0x0040 + +/* + * Error code values are set in {ASC/ADV}_DVC_VAR 'err_code'. + */ +#define ASC_IERR_NO_CARRIER 0x0001 /* No more carrier memory */ +#define ASC_IERR_MCODE_CHKSUM 0x0002 /* micro code check sum error */ +#define ASC_IERR_SET_PC_ADDR 0x0004 +#define ASC_IERR_START_STOP_CHIP 0x0008 /* start/stop chip failed */ +#define ASC_IERR_ILLEGAL_CONNECTION 0x0010 /* Illegal cable connection */ +#define ASC_IERR_SINGLE_END_DEVICE 0x0020 /* SE device on DIFF bus */ +#define ASC_IERR_REVERSED_CABLE 0x0040 /* Narrow flat cable reversed */ +#define ASC_IERR_SET_SCSI_ID 0x0080 /* set SCSI ID failed */ +#define ASC_IERR_HVD_DEVICE 0x0100 /* HVD device on LVD port */ +#define ASC_IERR_BAD_SIGNATURE 0x0200 /* signature not found */ +#define ASC_IERR_NO_BUS_TYPE 0x0400 +#define ASC_IERR_BIST_PRE_TEST 0x0800 /* BIST pre-test error */ +#define ASC_IERR_BIST_RAM_TEST 0x1000 /* BIST RAM test error */ +#define ASC_IERR_BAD_CHIPTYPE 0x2000 /* Invalid chip_type setting */ + +#define ASC_DEF_MAX_TOTAL_QNG (0xF0) +#define ASC_MIN_TAG_Q_PER_DVC (0x04) +#define ASC_MIN_FREE_Q (0x02) +#define ASC_MIN_TOTAL_QNG ((ASC_MAX_SG_QUEUE)+(ASC_MIN_FREE_Q)) +#define ASC_MAX_TOTAL_QNG 240 +#define ASC_MAX_PCI_ULTRA_INRAM_TOTAL_QNG 16 +#define ASC_MAX_PCI_ULTRA_INRAM_TAG_QNG 8 +#define ASC_MAX_PCI_INRAM_TOTAL_QNG 20 +#define ASC_MAX_INRAM_TAG_QNG 16 +#define ASC_IOADR_GAP 0x10 +#define ASC_SYN_MAX_OFFSET 0x0F +#define ASC_DEF_SDTR_OFFSET 0x0F +#define ASC_SDTR_ULTRA_PCI_10MB_INDEX 0x02 +#define ASYN_SDTR_DATA_FIX_PCI_REV_AB 0x41 + +/* The narrow chip only supports a limited selection of transfer rates. + * These are encoded in the range 0..7 or 0..15 depending whether the chip + * is Ultra-capable or not. These tables let us convert from one to the other. + */ +static const unsigned char asc_syn_xfer_period[8] = { + 25, 30, 35, 40, 50, 60, 70, 85 +}; + +static const unsigned char asc_syn_ultra_xfer_period[16] = { + 12, 19, 25, 32, 38, 44, 50, 57, 63, 69, 75, 82, 88, 94, 100, 107 +}; + +typedef struct ext_msg { + uchar msg_type; + uchar msg_len; + uchar msg_req; + union { + struct { + uchar sdtr_xfer_period; + uchar sdtr_req_ack_offset; + } sdtr; + struct { + uchar wdtr_width; + } wdtr; + struct { + uchar mdp_b3; + uchar mdp_b2; + uchar mdp_b1; + uchar mdp_b0; + } mdp; + } u_ext_msg; + uchar res; +} EXT_MSG; + +#define xfer_period u_ext_msg.sdtr.sdtr_xfer_period +#define req_ack_offset u_ext_msg.sdtr.sdtr_req_ack_offset +#define wdtr_width u_ext_msg.wdtr.wdtr_width +#define mdp_b3 u_ext_msg.mdp_b3 +#define mdp_b2 u_ext_msg.mdp_b2 +#define mdp_b1 u_ext_msg.mdp_b1 +#define mdp_b0 u_ext_msg.mdp_b0 + +typedef struct asc_dvc_cfg { + ASC_SCSI_BIT_ID_TYPE can_tagged_qng; + ASC_SCSI_BIT_ID_TYPE cmd_qng_enabled; + ASC_SCSI_BIT_ID_TYPE disc_enable; + ASC_SCSI_BIT_ID_TYPE sdtr_enable; + uchar chip_scsi_id; + uchar isa_dma_speed; + uchar isa_dma_channel; + uchar chip_version; + ushort mcode_date; + ushort mcode_version; + uchar max_tag_qng[ASC_MAX_TID + 1]; + uchar sdtr_period_offset[ASC_MAX_TID + 1]; + uchar adapter_info[6]; +} ASC_DVC_CFG; + +#define ASC_DEF_DVC_CNTL 0xFFFF +#define ASC_DEF_CHIP_SCSI_ID 7 +#define ASC_DEF_ISA_DMA_SPEED 4 +#define ASC_INIT_STATE_BEG_GET_CFG 0x0001 +#define ASC_INIT_STATE_END_GET_CFG 0x0002 +#define ASC_INIT_STATE_BEG_SET_CFG 0x0004 +#define ASC_INIT_STATE_END_SET_CFG 0x0008 +#define ASC_INIT_STATE_BEG_LOAD_MC 0x0010 +#define ASC_INIT_STATE_END_LOAD_MC 0x0020 +#define ASC_INIT_STATE_BEG_INQUIRY 0x0040 +#define ASC_INIT_STATE_END_INQUIRY 0x0080 +#define ASC_INIT_RESET_SCSI_DONE 0x0100 +#define ASC_INIT_STATE_WITHOUT_EEP 0x8000 +#define ASC_BUG_FIX_IF_NOT_DWB 0x0001 +#define ASC_BUG_FIX_ASYN_USE_SYN 0x0002 +#define ASC_MIN_TAGGED_CMD 7 +#define ASC_MAX_SCSI_RESET_WAIT 30 +#define ASC_OVERRUN_BSIZE 64 + +struct asc_dvc_var; /* Forward Declaration. */ + +typedef struct asc_dvc_var { + PortAddr iop_base; + ushort err_code; + ushort dvc_cntl; + ushort bug_fix_cntl; + ushort bus_type; + ASC_SCSI_BIT_ID_TYPE init_sdtr; + ASC_SCSI_BIT_ID_TYPE sdtr_done; + ASC_SCSI_BIT_ID_TYPE use_tagged_qng; + ASC_SCSI_BIT_ID_TYPE unit_not_ready; + ASC_SCSI_BIT_ID_TYPE queue_full_or_busy; + ASC_SCSI_BIT_ID_TYPE start_motor; + uchar *overrun_buf; + dma_addr_t overrun_dma; + uchar scsi_reset_wait; + uchar chip_no; + char is_in_int; + uchar max_total_qng; + uchar cur_total_qng; + uchar in_critical_cnt; + uchar last_q_shortage; + ushort init_state; + uchar cur_dvc_qng[ASC_MAX_TID + 1]; + uchar max_dvc_qng[ASC_MAX_TID + 1]; + ASC_SCSI_Q *scsiq_busy_head[ASC_MAX_TID + 1]; + ASC_SCSI_Q *scsiq_busy_tail[ASC_MAX_TID + 1]; + const uchar *sdtr_period_tbl; + ASC_DVC_CFG *cfg; + ASC_SCSI_BIT_ID_TYPE pci_fix_asyn_xfer_always; + char redo_scam; + ushort res2; + uchar dos_int13_table[ASC_MAX_TID + 1]; + ASC_DCNT max_dma_count; + ASC_SCSI_BIT_ID_TYPE no_scam; + ASC_SCSI_BIT_ID_TYPE pci_fix_asyn_xfer; + uchar min_sdtr_index; + uchar max_sdtr_index; + struct asc_board *drv_ptr; + int ptr_map_count; + void **ptr_map; + ASC_DCNT uc_break; +} ASC_DVC_VAR; + +typedef struct asc_dvc_inq_info { + uchar type[ASC_MAX_TID + 1][ASC_MAX_LUN + 1]; +} ASC_DVC_INQ_INFO; + +typedef struct asc_cap_info { + ASC_DCNT lba; + ASC_DCNT blk_size; +} ASC_CAP_INFO; + +typedef struct asc_cap_info_array { + ASC_CAP_INFO cap_info[ASC_MAX_TID + 1][ASC_MAX_LUN + 1]; +} ASC_CAP_INFO_ARRAY; + +#define ASC_MCNTL_NO_SEL_TIMEOUT (ushort)0x0001 +#define ASC_MCNTL_NULL_TARGET (ushort)0x0002 +#define ASC_CNTL_INITIATOR (ushort)0x0001 +#define ASC_CNTL_BIOS_GT_1GB (ushort)0x0002 +#define ASC_CNTL_BIOS_GT_2_DISK (ushort)0x0004 +#define ASC_CNTL_BIOS_REMOVABLE (ushort)0x0008 +#define ASC_CNTL_NO_SCAM (ushort)0x0010 +#define ASC_CNTL_INT_MULTI_Q (ushort)0x0080 +#define ASC_CNTL_NO_LUN_SUPPORT (ushort)0x0040 +#define ASC_CNTL_NO_VERIFY_COPY (ushort)0x0100 +#define ASC_CNTL_RESET_SCSI (ushort)0x0200 +#define ASC_CNTL_INIT_INQUIRY (ushort)0x0400 +#define ASC_CNTL_INIT_VERBOSE (ushort)0x0800 +#define ASC_CNTL_SCSI_PARITY (ushort)0x1000 +#define ASC_CNTL_BURST_MODE (ushort)0x2000 +#define ASC_CNTL_SDTR_ENABLE_ULTRA (ushort)0x4000 +#define ASC_EEP_DVC_CFG_BEG_VL 2 +#define ASC_EEP_MAX_DVC_ADDR_VL 15 +#define ASC_EEP_DVC_CFG_BEG 32 +#define ASC_EEP_MAX_DVC_ADDR 45 +#define ASC_EEP_MAX_RETRY 20 + +/* + * These macros keep the chip SCSI id and ISA DMA speed + * bitfields in board order. C bitfields aren't portable + * between big and little-endian platforms so they are + * not used. + */ + +#define ASC_EEP_GET_CHIP_ID(cfg) ((cfg)->id_speed & 0x0f) +#define ASC_EEP_GET_DMA_SPD(cfg) (((cfg)->id_speed & 0xf0) >> 4) +#define ASC_EEP_SET_CHIP_ID(cfg, sid) \ + ((cfg)->id_speed = ((cfg)->id_speed & 0xf0) | ((sid) & ASC_MAX_TID)) +#define ASC_EEP_SET_DMA_SPD(cfg, spd) \ + ((cfg)->id_speed = ((cfg)->id_speed & 0x0f) | ((spd) & 0x0f) << 4) + +typedef struct asceep_config { + ushort cfg_lsw; + ushort cfg_msw; + uchar init_sdtr; + uchar disc_enable; + uchar use_cmd_qng; + uchar start_motor; + uchar max_total_qng; + uchar max_tag_qng; + uchar bios_scan; + uchar power_up_wait; + uchar no_scam; + uchar id_speed; /* low order 4 bits is chip scsi id */ + /* high order 4 bits is isa dma speed */ + uchar dos_int13_table[ASC_MAX_TID + 1]; + uchar adapter_info[6]; + ushort cntl; + ushort chksum; +} ASCEEP_CONFIG; + +#define ASC_EEP_CMD_READ 0x80 +#define ASC_EEP_CMD_WRITE 0x40 +#define ASC_EEP_CMD_WRITE_ABLE 0x30 +#define ASC_EEP_CMD_WRITE_DISABLE 0x00 +#define ASCV_MSGOUT_BEG 0x0000 +#define ASCV_MSGOUT_SDTR_PERIOD (ASCV_MSGOUT_BEG+3) +#define ASCV_MSGOUT_SDTR_OFFSET (ASCV_MSGOUT_BEG+4) +#define ASCV_BREAK_SAVED_CODE (ushort)0x0006 +#define ASCV_MSGIN_BEG (ASCV_MSGOUT_BEG+8) +#define ASCV_MSGIN_SDTR_PERIOD (ASCV_MSGIN_BEG+3) +#define ASCV_MSGIN_SDTR_OFFSET (ASCV_MSGIN_BEG+4) +#define ASCV_SDTR_DATA_BEG (ASCV_MSGIN_BEG+8) +#define ASCV_SDTR_DONE_BEG (ASCV_SDTR_DATA_BEG+8) +#define ASCV_MAX_DVC_QNG_BEG (ushort)0x0020 +#define ASCV_BREAK_ADDR (ushort)0x0028 +#define ASCV_BREAK_NOTIFY_COUNT (ushort)0x002A +#define ASCV_BREAK_CONTROL (ushort)0x002C +#define ASCV_BREAK_HIT_COUNT (ushort)0x002E + +#define ASCV_ASCDVC_ERR_CODE_W (ushort)0x0030 +#define ASCV_MCODE_CHKSUM_W (ushort)0x0032 +#define ASCV_MCODE_SIZE_W (ushort)0x0034 +#define ASCV_STOP_CODE_B (ushort)0x0036 +#define ASCV_DVC_ERR_CODE_B (ushort)0x0037 +#define ASCV_OVERRUN_PADDR_D (ushort)0x0038 +#define ASCV_OVERRUN_BSIZE_D (ushort)0x003C +#define ASCV_HALTCODE_W (ushort)0x0040 +#define ASCV_CHKSUM_W (ushort)0x0042 +#define ASCV_MC_DATE_W (ushort)0x0044 +#define ASCV_MC_VER_W (ushort)0x0046 +#define ASCV_NEXTRDY_B (ushort)0x0048 +#define ASCV_DONENEXT_B (ushort)0x0049 +#define ASCV_USE_TAGGED_QNG_B (ushort)0x004A +#define ASCV_SCSIBUSY_B (ushort)0x004B +#define ASCV_Q_DONE_IN_PROGRESS_B (ushort)0x004C +#define ASCV_CURCDB_B (ushort)0x004D +#define ASCV_RCLUN_B (ushort)0x004E +#define ASCV_BUSY_QHEAD_B (ushort)0x004F +#define ASCV_DISC1_QHEAD_B (ushort)0x0050 +#define ASCV_DISC_ENABLE_B (ushort)0x0052 +#define ASCV_CAN_TAGGED_QNG_B (ushort)0x0053 +#define ASCV_HOSTSCSI_ID_B (ushort)0x0055 +#define ASCV_MCODE_CNTL_B (ushort)0x0056 +#define ASCV_NULL_TARGET_B (ushort)0x0057 +#define ASCV_FREE_Q_HEAD_W (ushort)0x0058 +#define ASCV_DONE_Q_TAIL_W (ushort)0x005A +#define ASCV_FREE_Q_HEAD_B (ushort)(ASCV_FREE_Q_HEAD_W+1) +#define ASCV_DONE_Q_TAIL_B (ushort)(ASCV_DONE_Q_TAIL_W+1) +#define ASCV_HOST_FLAG_B (ushort)0x005D +#define ASCV_TOTAL_READY_Q_B (ushort)0x0064 +#define ASCV_VER_SERIAL_B (ushort)0x0065 +#define ASCV_HALTCODE_SAVED_W (ushort)0x0066 +#define ASCV_WTM_FLAG_B (ushort)0x0068 +#define ASCV_RISC_FLAG_B (ushort)0x006A +#define ASCV_REQ_SG_LIST_QP (ushort)0x006B +#define ASC_HOST_FLAG_IN_ISR 0x01 +#define ASC_HOST_FLAG_ACK_INT 0x02 +#define ASC_RISC_FLAG_GEN_INT 0x01 +#define ASC_RISC_FLAG_REQ_SG_LIST 0x02 +#define IOP_CTRL (0x0F) +#define IOP_STATUS (0x0E) +#define IOP_INT_ACK IOP_STATUS +#define IOP_REG_IFC (0x0D) +#define IOP_SYN_OFFSET (0x0B) +#define IOP_EXTRA_CONTROL (0x0D) +#define IOP_REG_PC (0x0C) +#define IOP_RAM_ADDR (0x0A) +#define IOP_RAM_DATA (0x08) +#define IOP_EEP_DATA (0x06) +#define IOP_EEP_CMD (0x07) +#define IOP_VERSION (0x03) +#define IOP_CONFIG_HIGH (0x04) +#define IOP_CONFIG_LOW (0x02) +#define IOP_SIG_BYTE (0x01) +#define IOP_SIG_WORD (0x00) +#define IOP_REG_DC1 (0x0E) +#define IOP_REG_DC0 (0x0C) +#define IOP_REG_SB (0x0B) +#define IOP_REG_DA1 (0x0A) +#define IOP_REG_DA0 (0x08) +#define IOP_REG_SC (0x09) +#define IOP_DMA_SPEED (0x07) +#define IOP_REG_FLAG (0x07) +#define IOP_FIFO_H (0x06) +#define IOP_FIFO_L (0x04) +#define IOP_REG_ID (0x05) +#define IOP_REG_QP (0x03) +#define IOP_REG_IH (0x02) +#define IOP_REG_IX (0x01) +#define IOP_REG_AX (0x00) +#define IFC_REG_LOCK (0x00) +#define IFC_REG_UNLOCK (0x09) +#define IFC_WR_EN_FILTER (0x10) +#define IFC_RD_NO_EEPROM (0x10) +#define IFC_SLEW_RATE (0x20) +#define IFC_ACT_NEG (0x40) +#define IFC_INP_FILTER (0x80) +#define IFC_INIT_DEFAULT (IFC_ACT_NEG | IFC_REG_UNLOCK) +#define SC_SEL (uchar)(0x80) +#define SC_BSY (uchar)(0x40) +#define SC_ACK (uchar)(0x20) +#define SC_REQ (uchar)(0x10) +#define SC_ATN (uchar)(0x08) +#define SC_IO (uchar)(0x04) +#define SC_CD (uchar)(0x02) +#define SC_MSG (uchar)(0x01) +#define SEC_SCSI_CTL (uchar)(0x80) +#define SEC_ACTIVE_NEGATE (uchar)(0x40) +#define SEC_SLEW_RATE (uchar)(0x20) +#define SEC_ENABLE_FILTER (uchar)(0x10) +#define ASC_HALT_EXTMSG_IN (ushort)0x8000 +#define ASC_HALT_CHK_CONDITION (ushort)0x8100 +#define ASC_HALT_SS_QUEUE_FULL (ushort)0x8200 +#define ASC_HALT_DISABLE_ASYN_USE_SYN_FIX (ushort)0x8300 +#define ASC_HALT_ENABLE_ASYN_USE_SYN_FIX (ushort)0x8400 +#define ASC_HALT_SDTR_REJECTED (ushort)0x4000 +#define ASC_HALT_HOST_COPY_SG_LIST_TO_RISC ( ushort )0x2000 +#define ASC_MAX_QNO 0xF8 +#define ASC_DATA_SEC_BEG (ushort)0x0080 +#define ASC_DATA_SEC_END (ushort)0x0080 +#define ASC_CODE_SEC_BEG (ushort)0x0080 +#define ASC_CODE_SEC_END (ushort)0x0080 +#define ASC_QADR_BEG (0x4000) +#define ASC_QADR_USED (ushort)(ASC_MAX_QNO * 64) +#define ASC_QADR_END (ushort)0x7FFF +#define ASC_QLAST_ADR (ushort)0x7FC0 +#define ASC_QBLK_SIZE 0x40 +#define ASC_BIOS_DATA_QBEG 0xF8 +#define ASC_MIN_ACTIVE_QNO 0x01 +#define ASC_QLINK_END 0xFF +#define ASC_EEPROM_WORDS 0x10 +#define ASC_MAX_MGS_LEN 0x10 +#define ASC_BIOS_ADDR_DEF 0xDC00 +#define ASC_BIOS_SIZE 0x3800 +#define ASC_BIOS_RAM_OFF 0x3800 +#define ASC_BIOS_RAM_SIZE 0x800 +#define ASC_BIOS_MIN_ADDR 0xC000 +#define ASC_BIOS_MAX_ADDR 0xEC00 +#define ASC_BIOS_BANK_SIZE 0x0400 +#define ASC_MCODE_START_ADDR 0x0080 +#define ASC_CFG0_HOST_INT_ON 0x0020 +#define ASC_CFG0_BIOS_ON 0x0040 +#define ASC_CFG0_VERA_BURST_ON 0x0080 +#define ASC_CFG0_SCSI_PARITY_ON 0x0800 +#define ASC_CFG1_SCSI_TARGET_ON 0x0080 +#define ASC_CFG1_LRAM_8BITS_ON 0x0800 +#define ASC_CFG_MSW_CLR_MASK 0x3080 +#define CSW_TEST1 (ASC_CS_TYPE)0x8000 +#define CSW_AUTO_CONFIG (ASC_CS_TYPE)0x4000 +#define CSW_RESERVED1 (ASC_CS_TYPE)0x2000 +#define CSW_IRQ_WRITTEN (ASC_CS_TYPE)0x1000 +#define CSW_33MHZ_SELECTED (ASC_CS_TYPE)0x0800 +#define CSW_TEST2 (ASC_CS_TYPE)0x0400 +#define CSW_TEST3 (ASC_CS_TYPE)0x0200 +#define CSW_RESERVED2 (ASC_CS_TYPE)0x0100 +#define CSW_DMA_DONE (ASC_CS_TYPE)0x0080 +#define CSW_FIFO_RDY (ASC_CS_TYPE)0x0040 +#define CSW_EEP_READ_DONE (ASC_CS_TYPE)0x0020 +#define CSW_HALTED (ASC_CS_TYPE)0x0010 +#define CSW_SCSI_RESET_ACTIVE (ASC_CS_TYPE)0x0008 +#define CSW_PARITY_ERR (ASC_CS_TYPE)0x0004 +#define CSW_SCSI_RESET_LATCH (ASC_CS_TYPE)0x0002 +#define CSW_INT_PENDING (ASC_CS_TYPE)0x0001 +#define CIW_CLR_SCSI_RESET_INT (ASC_CS_TYPE)0x1000 +#define CIW_INT_ACK (ASC_CS_TYPE)0x0100 +#define CIW_TEST1 (ASC_CS_TYPE)0x0200 +#define CIW_TEST2 (ASC_CS_TYPE)0x0400 +#define CIW_SEL_33MHZ (ASC_CS_TYPE)0x0800 +#define CIW_IRQ_ACT (ASC_CS_TYPE)0x1000 +#define CC_CHIP_RESET (uchar)0x80 +#define CC_SCSI_RESET (uchar)0x40 +#define CC_HALT (uchar)0x20 +#define CC_SINGLE_STEP (uchar)0x10 +#define CC_DMA_ABLE (uchar)0x08 +#define CC_TEST (uchar)0x04 +#define CC_BANK_ONE (uchar)0x02 +#define CC_DIAG (uchar)0x01 +#define ASC_1000_ID0W 0x04C1 +#define ASC_1000_ID0W_FIX 0x00C1 +#define ASC_1000_ID1B 0x25 +#define ASC_EISA_REV_IOP_MASK (0x0C83) +#define ASC_EISA_CFG_IOP_MASK (0x0C86) +#define ASC_GET_EISA_SLOT(iop) (PortAddr)((iop) & 0xF000) +#define INS_HALTINT (ushort)0x6281 +#define INS_HALT (ushort)0x6280 +#define INS_SINT (ushort)0x6200 +#define INS_RFLAG_WTM (ushort)0x7380 +#define ASC_MC_SAVE_CODE_WSIZE 0x500 +#define ASC_MC_SAVE_DATA_WSIZE 0x40 + +typedef struct asc_mc_saved { + ushort data[ASC_MC_SAVE_DATA_WSIZE]; + ushort code[ASC_MC_SAVE_CODE_WSIZE]; +} ASC_MC_SAVED; + +#define AscGetQDoneInProgress(port) AscReadLramByte((port), ASCV_Q_DONE_IN_PROGRESS_B) +#define AscPutQDoneInProgress(port, val) AscWriteLramByte((port), ASCV_Q_DONE_IN_PROGRESS_B, val) +#define AscGetVarFreeQHead(port) AscReadLramWord((port), ASCV_FREE_Q_HEAD_W) +#define AscGetVarDoneQTail(port) AscReadLramWord((port), ASCV_DONE_Q_TAIL_W) +#define AscPutVarFreeQHead(port, val) AscWriteLramWord((port), ASCV_FREE_Q_HEAD_W, val) +#define AscPutVarDoneQTail(port, val) AscWriteLramWord((port), ASCV_DONE_Q_TAIL_W, val) +#define AscGetRiscVarFreeQHead(port) AscReadLramByte((port), ASCV_NEXTRDY_B) +#define AscGetRiscVarDoneQTail(port) AscReadLramByte((port), ASCV_DONENEXT_B) +#define AscPutRiscVarFreeQHead(port, val) AscWriteLramByte((port), ASCV_NEXTRDY_B, val) +#define AscPutRiscVarDoneQTail(port, val) AscWriteLramByte((port), ASCV_DONENEXT_B, val) +#define AscPutMCodeSDTRDoneAtID(port, id, data) AscWriteLramByte((port), (ushort)((ushort)ASCV_SDTR_DONE_BEG+(ushort)id), (data)) +#define AscGetMCodeSDTRDoneAtID(port, id) AscReadLramByte((port), (ushort)((ushort)ASCV_SDTR_DONE_BEG+(ushort)id)) +#define AscPutMCodeInitSDTRAtID(port, id, data) AscWriteLramByte((port), (ushort)((ushort)ASCV_SDTR_DATA_BEG+(ushort)id), data) +#define AscGetMCodeInitSDTRAtID(port, id) AscReadLramByte((port), (ushort)((ushort)ASCV_SDTR_DATA_BEG+(ushort)id)) +#define AscGetChipSignatureByte(port) (uchar)inp((port)+IOP_SIG_BYTE) +#define AscGetChipSignatureWord(port) (ushort)inpw((port)+IOP_SIG_WORD) +#define AscGetChipVerNo(port) (uchar)inp((port)+IOP_VERSION) +#define AscGetChipCfgLsw(port) (ushort)inpw((port)+IOP_CONFIG_LOW) +#define AscGetChipCfgMsw(port) (ushort)inpw((port)+IOP_CONFIG_HIGH) +#define AscSetChipCfgLsw(port, data) outpw((port)+IOP_CONFIG_LOW, data) +#define AscSetChipCfgMsw(port, data) outpw((port)+IOP_CONFIG_HIGH, data) +#define AscGetChipEEPCmd(port) (uchar)inp((port)+IOP_EEP_CMD) +#define AscSetChipEEPCmd(port, data) outp((port)+IOP_EEP_CMD, data) +#define AscGetChipEEPData(port) (ushort)inpw((port)+IOP_EEP_DATA) +#define AscSetChipEEPData(port, data) outpw((port)+IOP_EEP_DATA, data) +#define AscGetChipLramAddr(port) (ushort)inpw((PortAddr)((port)+IOP_RAM_ADDR)) +#define AscSetChipLramAddr(port, addr) outpw((PortAddr)((port)+IOP_RAM_ADDR), addr) +#define AscGetChipLramData(port) (ushort)inpw((port)+IOP_RAM_DATA) +#define AscSetChipLramData(port, data) outpw((port)+IOP_RAM_DATA, data) +#define AscGetChipIFC(port) (uchar)inp((port)+IOP_REG_IFC) +#define AscSetChipIFC(port, data) outp((port)+IOP_REG_IFC, data) +#define AscGetChipStatus(port) (ASC_CS_TYPE)inpw((port)+IOP_STATUS) +#define AscSetChipStatus(port, cs_val) outpw((port)+IOP_STATUS, cs_val) +#define AscGetChipControl(port) (uchar)inp((port)+IOP_CTRL) +#define AscSetChipControl(port, cc_val) outp((port)+IOP_CTRL, cc_val) +#define AscGetChipSyn(port) (uchar)inp((port)+IOP_SYN_OFFSET) +#define AscSetChipSyn(port, data) outp((port)+IOP_SYN_OFFSET, data) +#define AscSetPCAddr(port, data) outpw((port)+IOP_REG_PC, data) +#define AscGetPCAddr(port) (ushort)inpw((port)+IOP_REG_PC) +#define AscIsIntPending(port) (AscGetChipStatus(port) & (CSW_INT_PENDING | CSW_SCSI_RESET_LATCH)) +#define AscGetChipScsiID(port) ((AscGetChipCfgLsw(port) >> 8) & ASC_MAX_TID) +#define AscGetExtraControl(port) (uchar)inp((port)+IOP_EXTRA_CONTROL) +#define AscSetExtraControl(port, data) outp((port)+IOP_EXTRA_CONTROL, data) +#define AscReadChipAX(port) (ushort)inpw((port)+IOP_REG_AX) +#define AscWriteChipAX(port, data) outpw((port)+IOP_REG_AX, data) +#define AscReadChipIX(port) (uchar)inp((port)+IOP_REG_IX) +#define AscWriteChipIX(port, data) outp((port)+IOP_REG_IX, data) +#define AscReadChipIH(port) (ushort)inpw((port)+IOP_REG_IH) +#define AscWriteChipIH(port, data) outpw((port)+IOP_REG_IH, data) +#define AscReadChipQP(port) (uchar)inp((port)+IOP_REG_QP) +#define AscWriteChipQP(port, data) outp((port)+IOP_REG_QP, data) +#define AscReadChipFIFO_L(port) (ushort)inpw((port)+IOP_REG_FIFO_L) +#define AscWriteChipFIFO_L(port, data) outpw((port)+IOP_REG_FIFO_L, data) +#define AscReadChipFIFO_H(port) (ushort)inpw((port)+IOP_REG_FIFO_H) +#define AscWriteChipFIFO_H(port, data) outpw((port)+IOP_REG_FIFO_H, data) +#define AscReadChipDmaSpeed(port) (uchar)inp((port)+IOP_DMA_SPEED) +#define AscWriteChipDmaSpeed(port, data) outp((port)+IOP_DMA_SPEED, data) +#define AscReadChipDA0(port) (ushort)inpw((port)+IOP_REG_DA0) +#define AscWriteChipDA0(port) outpw((port)+IOP_REG_DA0, data) +#define AscReadChipDA1(port) (ushort)inpw((port)+IOP_REG_DA1) +#define AscWriteChipDA1(port) outpw((port)+IOP_REG_DA1, data) +#define AscReadChipDC0(port) (ushort)inpw((port)+IOP_REG_DC0) +#define AscWriteChipDC0(port) outpw((port)+IOP_REG_DC0, data) +#define AscReadChipDC1(port) (ushort)inpw((port)+IOP_REG_DC1) +#define AscWriteChipDC1(port) outpw((port)+IOP_REG_DC1, data) +#define AscReadChipDvcID(port) (uchar)inp((port)+IOP_REG_ID) +#define AscWriteChipDvcID(port, data) outp((port)+IOP_REG_ID, data) + +/* + * Portable Data Types + * + * Any instance where a 32-bit long or pointer type is assumed + * for precision or HW defined structures, the following define + * types must be used. In Linux the char, short, and int types + * are all consistent at 8, 16, and 32 bits respectively. Pointers + * and long types are 64 bits on Alpha and UltraSPARC. + */ +#define ADV_PADDR __u32 /* Physical address data type. */ +#define ADV_VADDR __u32 /* Virtual address data type. */ +#define ADV_DCNT __u32 /* Unsigned Data count type. */ +#define ADV_SDCNT __s32 /* Signed Data count type. */ + +/* + * These macros are used to convert a virtual address to a + * 32-bit value. This currently can be used on Linux Alpha + * which uses 64-bit virtual address but a 32-bit bus address. + * This is likely to break in the future, but doing this now + * will give us time to change the HW and FW to handle 64-bit + * addresses. + */ +#define ADV_VADDR_TO_U32 virt_to_bus +#define ADV_U32_TO_VADDR bus_to_virt + +#define AdvPortAddr void __iomem * /* Virtual memory address size */ + +/* + * Define Adv Library required memory access macros. + */ +#define ADV_MEM_READB(addr) readb(addr) +#define ADV_MEM_READW(addr) readw(addr) +#define ADV_MEM_WRITEB(addr, byte) writeb(byte, addr) +#define ADV_MEM_WRITEW(addr, word) writew(word, addr) +#define ADV_MEM_WRITEDW(addr, dword) writel(dword, addr) + +#define ADV_CARRIER_COUNT (ASC_DEF_MAX_HOST_QNG + 15) + +/* + * Define total number of simultaneous maximum element scatter-gather + * request blocks per wide adapter. ASC_DEF_MAX_HOST_QNG (253) is the + * maximum number of outstanding commands per wide host adapter. Each + * command uses one or more ADV_SG_BLOCK each with 15 scatter-gather + * elements. Allow each command to have at least one ADV_SG_BLOCK structure. + * This allows about 15 commands to have the maximum 17 ADV_SG_BLOCK + * structures or 255 scatter-gather elements. + */ +#define ADV_TOT_SG_BLOCK ASC_DEF_MAX_HOST_QNG + +/* + * Define maximum number of scatter-gather elements per request. + */ +#define ADV_MAX_SG_LIST 255 +#define NO_OF_SG_PER_BLOCK 15 + +#define ADV_EEP_DVC_CFG_BEGIN (0x00) +#define ADV_EEP_DVC_CFG_END (0x15) +#define ADV_EEP_DVC_CTL_BEGIN (0x16) /* location of OEM name */ +#define ADV_EEP_MAX_WORD_ADDR (0x1E) + +#define ADV_EEP_DELAY_MS 100 + +#define ADV_EEPROM_BIG_ENDIAN 0x8000 /* EEPROM Bit 15 */ +#define ADV_EEPROM_BIOS_ENABLE 0x4000 /* EEPROM Bit 14 */ +/* + * For the ASC3550 Bit 13 is Termination Polarity control bit. + * For later ICs Bit 13 controls whether the CIS (Card Information + * Service Section) is loaded from EEPROM. + */ +#define ADV_EEPROM_TERM_POL 0x2000 /* EEPROM Bit 13 */ +#define ADV_EEPROM_CIS_LD 0x2000 /* EEPROM Bit 13 */ +/* + * ASC38C1600 Bit 11 + * + * If EEPROM Bit 11 is 0 for Function 0, then Function 0 will specify + * INT A in the PCI Configuration Space Int Pin field. If it is 1, then + * Function 0 will specify INT B. + * + * If EEPROM Bit 11 is 0 for Function 1, then Function 1 will specify + * INT B in the PCI Configuration Space Int Pin field. If it is 1, then + * Function 1 will specify INT A. + */ +#define ADV_EEPROM_INTAB 0x0800 /* EEPROM Bit 11 */ + +typedef struct adveep_3550_config { + /* Word Offset, Description */ + + ushort cfg_lsw; /* 00 power up initialization */ + /* bit 13 set - Term Polarity Control */ + /* bit 14 set - BIOS Enable */ + /* bit 15 set - Big Endian Mode */ + ushort cfg_msw; /* 01 unused */ + ushort disc_enable; /* 02 disconnect enable */ + ushort wdtr_able; /* 03 Wide DTR able */ + ushort sdtr_able; /* 04 Synchronous DTR able */ + ushort start_motor; /* 05 send start up motor */ + ushort tagqng_able; /* 06 tag queuing able */ + ushort bios_scan; /* 07 BIOS device control */ + ushort scam_tolerant; /* 08 no scam */ + + uchar adapter_scsi_id; /* 09 Host Adapter ID */ + uchar bios_boot_delay; /* power up wait */ + + uchar scsi_reset_delay; /* 10 reset delay */ + uchar bios_id_lun; /* first boot device scsi id & lun */ + /* high nibble is lun */ + /* low nibble is scsi id */ + + uchar termination; /* 11 0 - automatic */ + /* 1 - low off / high off */ + /* 2 - low off / high on */ + /* 3 - low on / high on */ + /* There is no low on / high off */ + + uchar reserved1; /* reserved byte (not used) */ + + ushort bios_ctrl; /* 12 BIOS control bits */ + /* bit 0 BIOS don't act as initiator. */ + /* bit 1 BIOS > 1 GB support */ + /* bit 2 BIOS > 2 Disk Support */ + /* bit 3 BIOS don't support removables */ + /* bit 4 BIOS support bootable CD */ + /* bit 5 BIOS scan enabled */ + /* bit 6 BIOS support multiple LUNs */ + /* bit 7 BIOS display of message */ + /* bit 8 SCAM disabled */ + /* bit 9 Reset SCSI bus during init. */ + /* bit 10 */ + /* bit 11 No verbose initialization. */ + /* bit 12 SCSI parity enabled */ + /* bit 13 */ + /* bit 14 */ + /* bit 15 */ + ushort ultra_able; /* 13 ULTRA speed able */ + ushort reserved2; /* 14 reserved */ + uchar max_host_qng; /* 15 maximum host queuing */ + uchar max_dvc_qng; /* maximum per device queuing */ + ushort dvc_cntl; /* 16 control bit for driver */ + ushort bug_fix; /* 17 control bit for bug fix */ + ushort serial_number_word1; /* 18 Board serial number word 1 */ + ushort serial_number_word2; /* 19 Board serial number word 2 */ + ushort serial_number_word3; /* 20 Board serial number word 3 */ + ushort check_sum; /* 21 EEP check sum */ + uchar oem_name[16]; /* 22 OEM name */ + ushort dvc_err_code; /* 30 last device driver error code */ + ushort adv_err_code; /* 31 last uc and Adv Lib error code */ + ushort adv_err_addr; /* 32 last uc error address */ + ushort saved_dvc_err_code; /* 33 saved last dev. driver error code */ + ushort saved_adv_err_code; /* 34 saved last uc and Adv Lib error code */ + ushort saved_adv_err_addr; /* 35 saved last uc error address */ + ushort num_of_err; /* 36 number of error */ +} ADVEEP_3550_CONFIG; + +typedef struct adveep_38C0800_config { + /* Word Offset, Description */ + + ushort cfg_lsw; /* 00 power up initialization */ + /* bit 13 set - Load CIS */ + /* bit 14 set - BIOS Enable */ + /* bit 15 set - Big Endian Mode */ + ushort cfg_msw; /* 01 unused */ + ushort disc_enable; /* 02 disconnect enable */ + ushort wdtr_able; /* 03 Wide DTR able */ + ushort sdtr_speed1; /* 04 SDTR Speed TID 0-3 */ + ushort start_motor; /* 05 send start up motor */ + ushort tagqng_able; /* 06 tag queuing able */ + ushort bios_scan; /* 07 BIOS device control */ + ushort scam_tolerant; /* 08 no scam */ + + uchar adapter_scsi_id; /* 09 Host Adapter ID */ + uchar bios_boot_delay; /* power up wait */ + + uchar scsi_reset_delay; /* 10 reset delay */ + uchar bios_id_lun; /* first boot device scsi id & lun */ + /* high nibble is lun */ + /* low nibble is scsi id */ + + uchar termination_se; /* 11 0 - automatic */ + /* 1 - low off / high off */ + /* 2 - low off / high on */ + /* 3 - low on / high on */ + /* There is no low on / high off */ + + uchar termination_lvd; /* 11 0 - automatic */ + /* 1 - low off / high off */ + /* 2 - low off / high on */ + /* 3 - low on / high on */ + /* There is no low on / high off */ + + ushort bios_ctrl; /* 12 BIOS control bits */ + /* bit 0 BIOS don't act as initiator. */ + /* bit 1 BIOS > 1 GB support */ + /* bit 2 BIOS > 2 Disk Support */ + /* bit 3 BIOS don't support removables */ + /* bit 4 BIOS support bootable CD */ + /* bit 5 BIOS scan enabled */ + /* bit 6 BIOS support multiple LUNs */ + /* bit 7 BIOS display of message */ + /* bit 8 SCAM disabled */ + /* bit 9 Reset SCSI bus during init. */ + /* bit 10 */ + /* bit 11 No verbose initialization. */ + /* bit 12 SCSI parity enabled */ + /* bit 13 */ + /* bit 14 */ + /* bit 15 */ + ushort sdtr_speed2; /* 13 SDTR speed TID 4-7 */ + ushort sdtr_speed3; /* 14 SDTR speed TID 8-11 */ + uchar max_host_qng; /* 15 maximum host queueing */ + uchar max_dvc_qng; /* maximum per device queuing */ + ushort dvc_cntl; /* 16 control bit for driver */ + ushort sdtr_speed4; /* 17 SDTR speed 4 TID 12-15 */ + ushort serial_number_word1; /* 18 Board serial number word 1 */ + ushort serial_number_word2; /* 19 Board serial number word 2 */ + ushort serial_number_word3; /* 20 Board serial number word 3 */ + ushort check_sum; /* 21 EEP check sum */ + uchar oem_name[16]; /* 22 OEM name */ + ushort dvc_err_code; /* 30 last device driver error code */ + ushort adv_err_code; /* 31 last uc and Adv Lib error code */ + ushort adv_err_addr; /* 32 last uc error address */ + ushort saved_dvc_err_code; /* 33 saved last dev. driver error code */ + ushort saved_adv_err_code; /* 34 saved last uc and Adv Lib error code */ + ushort saved_adv_err_addr; /* 35 saved last uc error address */ + ushort reserved36; /* 36 reserved */ + ushort reserved37; /* 37 reserved */ + ushort reserved38; /* 38 reserved */ + ushort reserved39; /* 39 reserved */ + ushort reserved40; /* 40 reserved */ + ushort reserved41; /* 41 reserved */ + ushort reserved42; /* 42 reserved */ + ushort reserved43; /* 43 reserved */ + ushort reserved44; /* 44 reserved */ + ushort reserved45; /* 45 reserved */ + ushort reserved46; /* 46 reserved */ + ushort reserved47; /* 47 reserved */ + ushort reserved48; /* 48 reserved */ + ushort reserved49; /* 49 reserved */ + ushort reserved50; /* 50 reserved */ + ushort reserved51; /* 51 reserved */ + ushort reserved52; /* 52 reserved */ + ushort reserved53; /* 53 reserved */ + ushort reserved54; /* 54 reserved */ + ushort reserved55; /* 55 reserved */ + ushort cisptr_lsw; /* 56 CIS PTR LSW */ + ushort cisprt_msw; /* 57 CIS PTR MSW */ + ushort subsysvid; /* 58 SubSystem Vendor ID */ + ushort subsysid; /* 59 SubSystem ID */ + ushort reserved60; /* 60 reserved */ + ushort reserved61; /* 61 reserved */ + ushort reserved62; /* 62 reserved */ + ushort reserved63; /* 63 reserved */ +} ADVEEP_38C0800_CONFIG; + +typedef struct adveep_38C1600_config { + /* Word Offset, Description */ + + ushort cfg_lsw; /* 00 power up initialization */ + /* bit 11 set - Func. 0 INTB, Func. 1 INTA */ + /* clear - Func. 0 INTA, Func. 1 INTB */ + /* bit 13 set - Load CIS */ + /* bit 14 set - BIOS Enable */ + /* bit 15 set - Big Endian Mode */ + ushort cfg_msw; /* 01 unused */ + ushort disc_enable; /* 02 disconnect enable */ + ushort wdtr_able; /* 03 Wide DTR able */ + ushort sdtr_speed1; /* 04 SDTR Speed TID 0-3 */ + ushort start_motor; /* 05 send start up motor */ + ushort tagqng_able; /* 06 tag queuing able */ + ushort bios_scan; /* 07 BIOS device control */ + ushort scam_tolerant; /* 08 no scam */ + + uchar adapter_scsi_id; /* 09 Host Adapter ID */ + uchar bios_boot_delay; /* power up wait */ + + uchar scsi_reset_delay; /* 10 reset delay */ + uchar bios_id_lun; /* first boot device scsi id & lun */ + /* high nibble is lun */ + /* low nibble is scsi id */ + + uchar termination_se; /* 11 0 - automatic */ + /* 1 - low off / high off */ + /* 2 - low off / high on */ + /* 3 - low on / high on */ + /* There is no low on / high off */ + + uchar termination_lvd; /* 11 0 - automatic */ + /* 1 - low off / high off */ + /* 2 - low off / high on */ + /* 3 - low on / high on */ + /* There is no low on / high off */ + + ushort bios_ctrl; /* 12 BIOS control bits */ + /* bit 0 BIOS don't act as initiator. */ + /* bit 1 BIOS > 1 GB support */ + /* bit 2 BIOS > 2 Disk Support */ + /* bit 3 BIOS don't support removables */ + /* bit 4 BIOS support bootable CD */ + /* bit 5 BIOS scan enabled */ + /* bit 6 BIOS support multiple LUNs */ + /* bit 7 BIOS display of message */ + /* bit 8 SCAM disabled */ + /* bit 9 Reset SCSI bus during init. */ + /* bit 10 Basic Integrity Checking disabled */ + /* bit 11 No verbose initialization. */ + /* bit 12 SCSI parity enabled */ + /* bit 13 AIPP (Asyn. Info. Ph. Prot.) dis. */ + /* bit 14 */ + /* bit 15 */ + ushort sdtr_speed2; /* 13 SDTR speed TID 4-7 */ + ushort sdtr_speed3; /* 14 SDTR speed TID 8-11 */ + uchar max_host_qng; /* 15 maximum host queueing */ + uchar max_dvc_qng; /* maximum per device queuing */ + ushort dvc_cntl; /* 16 control bit for driver */ + ushort sdtr_speed4; /* 17 SDTR speed 4 TID 12-15 */ + ushort serial_number_word1; /* 18 Board serial number word 1 */ + ushort serial_number_word2; /* 19 Board serial number word 2 */ + ushort serial_number_word3; /* 20 Board serial number word 3 */ + ushort check_sum; /* 21 EEP check sum */ + uchar oem_name[16]; /* 22 OEM name */ + ushort dvc_err_code; /* 30 last device driver error code */ + ushort adv_err_code; /* 31 last uc and Adv Lib error code */ + ushort adv_err_addr; /* 32 last uc error address */ + ushort saved_dvc_err_code; /* 33 saved last dev. driver error code */ + ushort saved_adv_err_code; /* 34 saved last uc and Adv Lib error code */ + ushort saved_adv_err_addr; /* 35 saved last uc error address */ + ushort reserved36; /* 36 reserved */ + ushort reserved37; /* 37 reserved */ + ushort reserved38; /* 38 reserved */ + ushort reserved39; /* 39 reserved */ + ushort reserved40; /* 40 reserved */ + ushort reserved41; /* 41 reserved */ + ushort reserved42; /* 42 reserved */ + ushort reserved43; /* 43 reserved */ + ushort reserved44; /* 44 reserved */ + ushort reserved45; /* 45 reserved */ + ushort reserved46; /* 46 reserved */ + ushort reserved47; /* 47 reserved */ + ushort reserved48; /* 48 reserved */ + ushort reserved49; /* 49 reserved */ + ushort reserved50; /* 50 reserved */ + ushort reserved51; /* 51 reserved */ + ushort reserved52; /* 52 reserved */ + ushort reserved53; /* 53 reserved */ + ushort reserved54; /* 54 reserved */ + ushort reserved55; /* 55 reserved */ + ushort cisptr_lsw; /* 56 CIS PTR LSW */ + ushort cisprt_msw; /* 57 CIS PTR MSW */ + ushort subsysvid; /* 58 SubSystem Vendor ID */ + ushort subsysid; /* 59 SubSystem ID */ + ushort reserved60; /* 60 reserved */ + ushort reserved61; /* 61 reserved */ + ushort reserved62; /* 62 reserved */ + ushort reserved63; /* 63 reserved */ +} ADVEEP_38C1600_CONFIG; + +/* + * EEPROM Commands + */ +#define ASC_EEP_CMD_DONE 0x0200 + +/* bios_ctrl */ +#define BIOS_CTRL_BIOS 0x0001 +#define BIOS_CTRL_EXTENDED_XLAT 0x0002 +#define BIOS_CTRL_GT_2_DISK 0x0004 +#define BIOS_CTRL_BIOS_REMOVABLE 0x0008 +#define BIOS_CTRL_BOOTABLE_CD 0x0010 +#define BIOS_CTRL_MULTIPLE_LUN 0x0040 +#define BIOS_CTRL_DISPLAY_MSG 0x0080 +#define BIOS_CTRL_NO_SCAM 0x0100 +#define BIOS_CTRL_RESET_SCSI_BUS 0x0200 +#define BIOS_CTRL_INIT_VERBOSE 0x0800 +#define BIOS_CTRL_SCSI_PARITY 0x1000 +#define BIOS_CTRL_AIPP_DIS 0x2000 + +#define ADV_3550_MEMSIZE 0x2000 /* 8 KB Internal Memory */ + +#define ADV_38C0800_MEMSIZE 0x4000 /* 16 KB Internal Memory */ + +/* + * XXX - Since ASC38C1600 Rev.3 has a local RAM failure issue, there is + * a special 16K Adv Library and Microcode version. After the issue is + * resolved, should restore 32K support. + * + * #define ADV_38C1600_MEMSIZE 0x8000L * 32 KB Internal Memory * + */ +#define ADV_38C1600_MEMSIZE 0x4000 /* 16 KB Internal Memory */ + +/* + * Byte I/O register address from base of 'iop_base'. + */ +#define IOPB_INTR_STATUS_REG 0x00 +#define IOPB_CHIP_ID_1 0x01 +#define IOPB_INTR_ENABLES 0x02 +#define IOPB_CHIP_TYPE_REV 0x03 +#define IOPB_RES_ADDR_4 0x04 +#define IOPB_RES_ADDR_5 0x05 +#define IOPB_RAM_DATA 0x06 +#define IOPB_RES_ADDR_7 0x07 +#define IOPB_FLAG_REG 0x08 +#define IOPB_RES_ADDR_9 0x09 +#define IOPB_RISC_CSR 0x0A +#define IOPB_RES_ADDR_B 0x0B +#define IOPB_RES_ADDR_C 0x0C +#define IOPB_RES_ADDR_D 0x0D +#define IOPB_SOFT_OVER_WR 0x0E +#define IOPB_RES_ADDR_F 0x0F +#define IOPB_MEM_CFG 0x10 +#define IOPB_RES_ADDR_11 0x11 +#define IOPB_GPIO_DATA 0x12 +#define IOPB_RES_ADDR_13 0x13 +#define IOPB_FLASH_PAGE 0x14 +#define IOPB_RES_ADDR_15 0x15 +#define IOPB_GPIO_CNTL 0x16 +#define IOPB_RES_ADDR_17 0x17 +#define IOPB_FLASH_DATA 0x18 +#define IOPB_RES_ADDR_19 0x19 +#define IOPB_RES_ADDR_1A 0x1A +#define IOPB_RES_ADDR_1B 0x1B +#define IOPB_RES_ADDR_1C 0x1C +#define IOPB_RES_ADDR_1D 0x1D +#define IOPB_RES_ADDR_1E 0x1E +#define IOPB_RES_ADDR_1F 0x1F +#define IOPB_DMA_CFG0 0x20 +#define IOPB_DMA_CFG1 0x21 +#define IOPB_TICKLE 0x22 +#define IOPB_DMA_REG_WR 0x23 +#define IOPB_SDMA_STATUS 0x24 +#define IOPB_SCSI_BYTE_CNT 0x25 +#define IOPB_HOST_BYTE_CNT 0x26 +#define IOPB_BYTE_LEFT_TO_XFER 0x27 +#define IOPB_BYTE_TO_XFER_0 0x28 +#define IOPB_BYTE_TO_XFER_1 0x29 +#define IOPB_BYTE_TO_XFER_2 0x2A +#define IOPB_BYTE_TO_XFER_3 0x2B +#define IOPB_ACC_GRP 0x2C +#define IOPB_RES_ADDR_2D 0x2D +#define IOPB_DEV_ID 0x2E +#define IOPB_RES_ADDR_2F 0x2F +#define IOPB_SCSI_DATA 0x30 +#define IOPB_RES_ADDR_31 0x31 +#define IOPB_RES_ADDR_32 0x32 +#define IOPB_SCSI_DATA_HSHK 0x33 +#define IOPB_SCSI_CTRL 0x34 +#define IOPB_RES_ADDR_35 0x35 +#define IOPB_RES_ADDR_36 0x36 +#define IOPB_RES_ADDR_37 0x37 +#define IOPB_RAM_BIST 0x38 +#define IOPB_PLL_TEST 0x39 +#define IOPB_PCI_INT_CFG 0x3A +#define IOPB_RES_ADDR_3B 0x3B +#define IOPB_RFIFO_CNT 0x3C +#define IOPB_RES_ADDR_3D 0x3D +#define IOPB_RES_ADDR_3E 0x3E +#define IOPB_RES_ADDR_3F 0x3F + +/* + * Word I/O register address from base of 'iop_base'. + */ +#define IOPW_CHIP_ID_0 0x00 /* CID0 */ +#define IOPW_CTRL_REG 0x02 /* CC */ +#define IOPW_RAM_ADDR 0x04 /* LA */ +#define IOPW_RAM_DATA 0x06 /* LD */ +#define IOPW_RES_ADDR_08 0x08 +#define IOPW_RISC_CSR 0x0A /* CSR */ +#define IOPW_SCSI_CFG0 0x0C /* CFG0 */ +#define IOPW_SCSI_CFG1 0x0E /* CFG1 */ +#define IOPW_RES_ADDR_10 0x10 +#define IOPW_SEL_MASK 0x12 /* SM */ +#define IOPW_RES_ADDR_14 0x14 +#define IOPW_FLASH_ADDR 0x16 /* FA */ +#define IOPW_RES_ADDR_18 0x18 +#define IOPW_EE_CMD 0x1A /* EC */ +#define IOPW_EE_DATA 0x1C /* ED */ +#define IOPW_SFIFO_CNT 0x1E /* SFC */ +#define IOPW_RES_ADDR_20 0x20 +#define IOPW_Q_BASE 0x22 /* QB */ +#define IOPW_QP 0x24 /* QP */ +#define IOPW_IX 0x26 /* IX */ +#define IOPW_SP 0x28 /* SP */ +#define IOPW_PC 0x2A /* PC */ +#define IOPW_RES_ADDR_2C 0x2C +#define IOPW_RES_ADDR_2E 0x2E +#define IOPW_SCSI_DATA 0x30 /* SD */ +#define IOPW_SCSI_DATA_HSHK 0x32 /* SDH */ +#define IOPW_SCSI_CTRL 0x34 /* SC */ +#define IOPW_HSHK_CFG 0x36 /* HCFG */ +#define IOPW_SXFR_STATUS 0x36 /* SXS */ +#define IOPW_SXFR_CNTL 0x38 /* SXL */ +#define IOPW_SXFR_CNTH 0x3A /* SXH */ +#define IOPW_RES_ADDR_3C 0x3C +#define IOPW_RFIFO_DATA 0x3E /* RFD */ + +/* + * Doubleword I/O register address from base of 'iop_base'. + */ +#define IOPDW_RES_ADDR_0 0x00 +#define IOPDW_RAM_DATA 0x04 +#define IOPDW_RES_ADDR_8 0x08 +#define IOPDW_RES_ADDR_C 0x0C +#define IOPDW_RES_ADDR_10 0x10 +#define IOPDW_COMMA 0x14 +#define IOPDW_COMMB 0x18 +#define IOPDW_RES_ADDR_1C 0x1C +#define IOPDW_SDMA_ADDR0 0x20 +#define IOPDW_SDMA_ADDR1 0x24 +#define IOPDW_SDMA_COUNT 0x28 +#define IOPDW_SDMA_ERROR 0x2C +#define IOPDW_RDMA_ADDR0 0x30 +#define IOPDW_RDMA_ADDR1 0x34 +#define IOPDW_RDMA_COUNT 0x38 +#define IOPDW_RDMA_ERROR 0x3C + +#define ADV_CHIP_ID_BYTE 0x25 +#define ADV_CHIP_ID_WORD 0x04C1 + +#define ADV_INTR_ENABLE_HOST_INTR 0x01 +#define ADV_INTR_ENABLE_SEL_INTR 0x02 +#define ADV_INTR_ENABLE_DPR_INTR 0x04 +#define ADV_INTR_ENABLE_RTA_INTR 0x08 +#define ADV_INTR_ENABLE_RMA_INTR 0x10 +#define ADV_INTR_ENABLE_RST_INTR 0x20 +#define ADV_INTR_ENABLE_DPE_INTR 0x40 +#define ADV_INTR_ENABLE_GLOBAL_INTR 0x80 + +#define ADV_INTR_STATUS_INTRA 0x01 +#define ADV_INTR_STATUS_INTRB 0x02 +#define ADV_INTR_STATUS_INTRC 0x04 + +#define ADV_RISC_CSR_STOP (0x0000) +#define ADV_RISC_TEST_COND (0x2000) +#define ADV_RISC_CSR_RUN (0x4000) +#define ADV_RISC_CSR_SINGLE_STEP (0x8000) + +#define ADV_CTRL_REG_HOST_INTR 0x0100 +#define ADV_CTRL_REG_SEL_INTR 0x0200 +#define ADV_CTRL_REG_DPR_INTR 0x0400 +#define ADV_CTRL_REG_RTA_INTR 0x0800 +#define ADV_CTRL_REG_RMA_INTR 0x1000 +#define ADV_CTRL_REG_RES_BIT14 0x2000 +#define ADV_CTRL_REG_DPE_INTR 0x4000 +#define ADV_CTRL_REG_POWER_DONE 0x8000 +#define ADV_CTRL_REG_ANY_INTR 0xFF00 + +#define ADV_CTRL_REG_CMD_RESET 0x00C6 +#define ADV_CTRL_REG_CMD_WR_IO_REG 0x00C5 +#define ADV_CTRL_REG_CMD_RD_IO_REG 0x00C4 +#define ADV_CTRL_REG_CMD_WR_PCI_CFG_SPACE 0x00C3 +#define ADV_CTRL_REG_CMD_RD_PCI_CFG_SPACE 0x00C2 + +#define ADV_TICKLE_NOP 0x00 +#define ADV_TICKLE_A 0x01 +#define ADV_TICKLE_B 0x02 +#define ADV_TICKLE_C 0x03 + +#define AdvIsIntPending(port) \ + (AdvReadWordRegister(port, IOPW_CTRL_REG) & ADV_CTRL_REG_HOST_INTR) + +/* + * SCSI_CFG0 Register bit definitions + */ +#define TIMER_MODEAB 0xC000 /* Watchdog, Second, and Select. Timer Ctrl. */ +#define PARITY_EN 0x2000 /* Enable SCSI Parity Error detection */ +#define EVEN_PARITY 0x1000 /* Select Even Parity */ +#define WD_LONG 0x0800 /* Watchdog Interval, 1: 57 min, 0: 13 sec */ +#define QUEUE_128 0x0400 /* Queue Size, 1: 128 byte, 0: 64 byte */ +#define PRIM_MODE 0x0100 /* Primitive SCSI mode */ +#define SCAM_EN 0x0080 /* Enable SCAM selection */ +#define SEL_TMO_LONG 0x0040 /* Sel/Resel Timeout, 1: 400 ms, 0: 1.6 ms */ +#define CFRM_ID 0x0020 /* SCAM id sel. confirm., 1: fast, 0: 6.4 ms */ +#define OUR_ID_EN 0x0010 /* Enable OUR_ID bits */ +#define OUR_ID 0x000F /* SCSI ID */ + +/* + * SCSI_CFG1 Register bit definitions + */ +#define BIG_ENDIAN 0x8000 /* Enable Big Endian Mode MIO:15, EEP:15 */ +#define TERM_POL 0x2000 /* Terminator Polarity Ctrl. MIO:13, EEP:13 */ +#define SLEW_RATE 0x1000 /* SCSI output buffer slew rate */ +#define FILTER_SEL 0x0C00 /* Filter Period Selection */ +#define FLTR_DISABLE 0x0000 /* Input Filtering Disabled */ +#define FLTR_11_TO_20NS 0x0800 /* Input Filtering 11ns to 20ns */ +#define FLTR_21_TO_39NS 0x0C00 /* Input Filtering 21ns to 39ns */ +#define ACTIVE_DBL 0x0200 /* Disable Active Negation */ +#define DIFF_MODE 0x0100 /* SCSI differential Mode (Read-Only) */ +#define DIFF_SENSE 0x0080 /* 1: No SE cables, 0: SE cable (Read-Only) */ +#define TERM_CTL_SEL 0x0040 /* Enable TERM_CTL_H and TERM_CTL_L */ +#define TERM_CTL 0x0030 /* External SCSI Termination Bits */ +#define TERM_CTL_H 0x0020 /* Enable External SCSI Upper Termination */ +#define TERM_CTL_L 0x0010 /* Enable External SCSI Lower Termination */ +#define CABLE_DETECT 0x000F /* External SCSI Cable Connection Status */ + +/* + * Addendum for ASC-38C0800 Chip + * + * The ASC-38C1600 Chip uses the same definitions except that the + * bus mode override bits [12:10] have been moved to byte register + * offset 0xE (IOPB_SOFT_OVER_WR) bits [12:10]. The [12:10] bits in + * SCSI_CFG1 are read-only and always available. Bit 14 (DIS_TERM_DRV) + * is not needed. The [12:10] bits in IOPB_SOFT_OVER_WR are write-only. + * Also each ASC-38C1600 function or channel uses only cable bits [5:4] + * and [1:0]. Bits [14], [7:6], [3:2] are unused. + */ +#define DIS_TERM_DRV 0x4000 /* 1: Read c_det[3:0], 0: cannot read */ +#define HVD_LVD_SE 0x1C00 /* Device Detect Bits */ +#define HVD 0x1000 /* HVD Device Detect */ +#define LVD 0x0800 /* LVD Device Detect */ +#define SE 0x0400 /* SE Device Detect */ +#define TERM_LVD 0x00C0 /* LVD Termination Bits */ +#define TERM_LVD_HI 0x0080 /* Enable LVD Upper Termination */ +#define TERM_LVD_LO 0x0040 /* Enable LVD Lower Termination */ +#define TERM_SE 0x0030 /* SE Termination Bits */ +#define TERM_SE_HI 0x0020 /* Enable SE Upper Termination */ +#define TERM_SE_LO 0x0010 /* Enable SE Lower Termination */ +#define C_DET_LVD 0x000C /* LVD Cable Detect Bits */ +#define C_DET3 0x0008 /* Cable Detect for LVD External Wide */ +#define C_DET2 0x0004 /* Cable Detect for LVD Internal Wide */ +#define C_DET_SE 0x0003 /* SE Cable Detect Bits */ +#define C_DET1 0x0002 /* Cable Detect for SE Internal Wide */ +#define C_DET0 0x0001 /* Cable Detect for SE Internal Narrow */ + +#define CABLE_ILLEGAL_A 0x7 + /* x 0 0 0 | on on | Illegal (all 3 connectors are used) */ + +#define CABLE_ILLEGAL_B 0xB + /* 0 x 0 0 | on on | Illegal (all 3 connectors are used) */ + +/* + * MEM_CFG Register bit definitions + */ +#define BIOS_EN 0x40 /* BIOS Enable MIO:14,EEP:14 */ +#define FAST_EE_CLK 0x20 /* Diagnostic Bit */ +#define RAM_SZ 0x1C /* Specify size of RAM to RISC */ +#define RAM_SZ_2KB 0x00 /* 2 KB */ +#define RAM_SZ_4KB 0x04 /* 4 KB */ +#define RAM_SZ_8KB 0x08 /* 8 KB */ +#define RAM_SZ_16KB 0x0C /* 16 KB */ +#define RAM_SZ_32KB 0x10 /* 32 KB */ +#define RAM_SZ_64KB 0x14 /* 64 KB */ + +/* + * DMA_CFG0 Register bit definitions + * + * This register is only accessible to the host. + */ +#define BC_THRESH_ENB 0x80 /* PCI DMA Start Conditions */ +#define FIFO_THRESH 0x70 /* PCI DMA FIFO Threshold */ +#define FIFO_THRESH_16B 0x00 /* 16 bytes */ +#define FIFO_THRESH_32B 0x20 /* 32 bytes */ +#define FIFO_THRESH_48B 0x30 /* 48 bytes */ +#define FIFO_THRESH_64B 0x40 /* 64 bytes */ +#define FIFO_THRESH_80B 0x50 /* 80 bytes (default) */ +#define FIFO_THRESH_96B 0x60 /* 96 bytes */ +#define FIFO_THRESH_112B 0x70 /* 112 bytes */ +#define START_CTL 0x0C /* DMA start conditions */ +#define START_CTL_TH 0x00 /* Wait threshold level (default) */ +#define START_CTL_ID 0x04 /* Wait SDMA/SBUS idle */ +#define START_CTL_THID 0x08 /* Wait threshold and SDMA/SBUS idle */ +#define START_CTL_EMFU 0x0C /* Wait SDMA FIFO empty/full */ +#define READ_CMD 0x03 /* Memory Read Method */ +#define READ_CMD_MR 0x00 /* Memory Read */ +#define READ_CMD_MRL 0x02 /* Memory Read Long */ +#define READ_CMD_MRM 0x03 /* Memory Read Multiple (default) */ + +/* + * ASC-38C0800 RAM BIST Register bit definitions + */ +#define RAM_TEST_MODE 0x80 +#define PRE_TEST_MODE 0x40 +#define NORMAL_MODE 0x00 +#define RAM_TEST_DONE 0x10 +#define RAM_TEST_STATUS 0x0F +#define RAM_TEST_HOST_ERROR 0x08 +#define RAM_TEST_INTRAM_ERROR 0x04 +#define RAM_TEST_RISC_ERROR 0x02 +#define RAM_TEST_SCSI_ERROR 0x01 +#define RAM_TEST_SUCCESS 0x00 +#define PRE_TEST_VALUE 0x05 +#define NORMAL_VALUE 0x00 + +/* + * ASC38C1600 Definitions + * + * IOPB_PCI_INT_CFG Bit Field Definitions + */ + +#define INTAB_LD 0x80 /* Value loaded from EEPROM Bit 11. */ + +/* + * Bit 1 can be set to change the interrupt for the Function to operate in + * Totem Pole mode. By default Bit 1 is 0 and the interrupt operates in + * Open Drain mode. Both functions of the ASC38C1600 must be set to the same + * mode, otherwise the operating mode is undefined. + */ +#define TOTEMPOLE 0x02 + +/* + * Bit 0 can be used to change the Int Pin for the Function. The value is + * 0 by default for both Functions with Function 0 using INT A and Function + * B using INT B. For Function 0 if set, INT B is used. For Function 1 if set, + * INT A is used. + * + * EEPROM Word 0 Bit 11 for each Function may change the initial Int Pin + * value specified in the PCI Configuration Space. + */ +#define INTAB 0x01 + +/* + * Adv Library Status Definitions + */ +#define ADV_TRUE 1 +#define ADV_FALSE 0 +#define ADV_SUCCESS 1 +#define ADV_BUSY 0 +#define ADV_ERROR (-1) + +/* + * ADV_DVC_VAR 'warn_code' values + */ +#define ASC_WARN_BUSRESET_ERROR 0x0001 /* SCSI Bus Reset error */ +#define ASC_WARN_EEPROM_CHKSUM 0x0002 /* EEP check sum error */ +#define ASC_WARN_EEPROM_TERMINATION 0x0004 /* EEP termination bad field */ +#define ASC_WARN_ERROR 0xFFFF /* ADV_ERROR return */ + +#define ADV_MAX_TID 15 /* max. target identifier */ +#define ADV_MAX_LUN 7 /* max. logical unit number */ + +/* + * Fixed locations of microcode operating variables. + */ +#define ASC_MC_CODE_BEGIN_ADDR 0x0028 /* microcode start address */ +#define ASC_MC_CODE_END_ADDR 0x002A /* microcode end address */ +#define ASC_MC_CODE_CHK_SUM 0x002C /* microcode code checksum */ +#define ASC_MC_VERSION_DATE 0x0038 /* microcode version */ +#define ASC_MC_VERSION_NUM 0x003A /* microcode number */ +#define ASC_MC_BIOSMEM 0x0040 /* BIOS RISC Memory Start */ +#define ASC_MC_BIOSLEN 0x0050 /* BIOS RISC Memory Length */ +#define ASC_MC_BIOS_SIGNATURE 0x0058 /* BIOS Signature 0x55AA */ +#define ASC_MC_BIOS_VERSION 0x005A /* BIOS Version (2 bytes) */ +#define ASC_MC_SDTR_SPEED1 0x0090 /* SDTR Speed for TID 0-3 */ +#define ASC_MC_SDTR_SPEED2 0x0092 /* SDTR Speed for TID 4-7 */ +#define ASC_MC_SDTR_SPEED3 0x0094 /* SDTR Speed for TID 8-11 */ +#define ASC_MC_SDTR_SPEED4 0x0096 /* SDTR Speed for TID 12-15 */ +#define ASC_MC_CHIP_TYPE 0x009A +#define ASC_MC_INTRB_CODE 0x009B +#define ASC_MC_WDTR_ABLE 0x009C +#define ASC_MC_SDTR_ABLE 0x009E +#define ASC_MC_TAGQNG_ABLE 0x00A0 +#define ASC_MC_DISC_ENABLE 0x00A2 +#define ASC_MC_IDLE_CMD_STATUS 0x00A4 +#define ASC_MC_IDLE_CMD 0x00A6 +#define ASC_MC_IDLE_CMD_PARAMETER 0x00A8 +#define ASC_MC_DEFAULT_SCSI_CFG0 0x00AC +#define ASC_MC_DEFAULT_SCSI_CFG1 0x00AE +#define ASC_MC_DEFAULT_MEM_CFG 0x00B0 +#define ASC_MC_DEFAULT_SEL_MASK 0x00B2 +#define ASC_MC_SDTR_DONE 0x00B6 +#define ASC_MC_NUMBER_OF_QUEUED_CMD 0x00C0 +#define ASC_MC_NUMBER_OF_MAX_CMD 0x00D0 +#define ASC_MC_DEVICE_HSHK_CFG_TABLE 0x0100 +#define ASC_MC_CONTROL_FLAG 0x0122 /* Microcode control flag. */ +#define ASC_MC_WDTR_DONE 0x0124 +#define ASC_MC_CAM_MODE_MASK 0x015E /* CAM mode TID bitmask. */ +#define ASC_MC_ICQ 0x0160 +#define ASC_MC_IRQ 0x0164 +#define ASC_MC_PPR_ABLE 0x017A + +/* + * BIOS LRAM variable absolute offsets. + */ +#define BIOS_CODESEG 0x54 +#define BIOS_CODELEN 0x56 +#define BIOS_SIGNATURE 0x58 +#define BIOS_VERSION 0x5A + +/* + * Microcode Control Flags + * + * Flags set by the Adv Library in RISC variable 'control_flag' (0x122) + * and handled by the microcode. + */ +#define CONTROL_FLAG_IGNORE_PERR 0x0001 /* Ignore DMA Parity Errors */ +#define CONTROL_FLAG_ENABLE_AIPP 0x0002 /* Enabled AIPP checking. */ + +/* + * ASC_MC_DEVICE_HSHK_CFG_TABLE microcode table or HSHK_CFG register format + */ +#define HSHK_CFG_WIDE_XFR 0x8000 +#define HSHK_CFG_RATE 0x0F00 +#define HSHK_CFG_OFFSET 0x001F + +#define ASC_DEF_MAX_HOST_QNG 0xFD /* Max. number of host commands (253) */ +#define ASC_DEF_MIN_HOST_QNG 0x10 /* Min. number of host commands (16) */ +#define ASC_DEF_MAX_DVC_QNG 0x3F /* Max. number commands per device (63) */ +#define ASC_DEF_MIN_DVC_QNG 0x04 /* Min. number commands per device (4) */ + +#define ASC_QC_DATA_CHECK 0x01 /* Require ASC_QC_DATA_OUT set or clear. */ +#define ASC_QC_DATA_OUT 0x02 /* Data out DMA transfer. */ +#define ASC_QC_START_MOTOR 0x04 /* Send auto-start motor before request. */ +#define ASC_QC_NO_OVERRUN 0x08 /* Don't report overrun. */ +#define ASC_QC_FREEZE_TIDQ 0x10 /* Freeze TID queue after request. XXX TBD */ + +#define ASC_QSC_NO_DISC 0x01 /* Don't allow disconnect for request. */ +#define ASC_QSC_NO_TAGMSG 0x02 /* Don't allow tag queuing for request. */ +#define ASC_QSC_NO_SYNC 0x04 /* Don't use Synch. transfer on request. */ +#define ASC_QSC_NO_WIDE 0x08 /* Don't use Wide transfer on request. */ +#define ASC_QSC_REDO_DTR 0x10 /* Renegotiate WDTR/SDTR before request. */ +/* + * Note: If a Tag Message is to be sent and neither ASC_QSC_HEAD_TAG or + * ASC_QSC_ORDERED_TAG is set, then a Simple Tag Message (0x20) is used. + */ +#define ASC_QSC_HEAD_TAG 0x40 /* Use Head Tag Message (0x21). */ +#define ASC_QSC_ORDERED_TAG 0x80 /* Use Ordered Tag Message (0x22). */ + +/* + * All fields here are accessed by the board microcode and need to be + * little-endian. + */ +typedef struct adv_carr_t { + ADV_VADDR carr_va; /* Carrier Virtual Address */ + ADV_PADDR carr_pa; /* Carrier Physical Address */ + ADV_VADDR areq_vpa; /* ASC_SCSI_REQ_Q Virtual or Physical Address */ + /* + * next_vpa [31:4] Carrier Virtual or Physical Next Pointer + * + * next_vpa [3:1] Reserved Bits + * next_vpa [0] Done Flag set in Response Queue. + */ + ADV_VADDR next_vpa; +} ADV_CARR_T; + +/* + * Mask used to eliminate low 4 bits of carrier 'next_vpa' field. + */ +#define ASC_NEXT_VPA_MASK 0xFFFFFFF0 + +#define ASC_RQ_DONE 0x00000001 +#define ASC_RQ_GOOD 0x00000002 +#define ASC_CQ_STOPPER 0x00000000 + +#define ASC_GET_CARRP(carrp) ((carrp) & ASC_NEXT_VPA_MASK) + +#define ADV_CARRIER_NUM_PAGE_CROSSING \ + (((ADV_CARRIER_COUNT * sizeof(ADV_CARR_T)) + (PAGE_SIZE - 1))/PAGE_SIZE) + +#define ADV_CARRIER_BUFSIZE \ + ((ADV_CARRIER_COUNT + ADV_CARRIER_NUM_PAGE_CROSSING) * sizeof(ADV_CARR_T)) + +/* + * ASC_SCSI_REQ_Q 'a_flag' definitions + * + * The Adv Library should limit use to the lower nibble (4 bits) of + * a_flag. Drivers are free to use the upper nibble (4 bits) of a_flag. + */ +#define ADV_POLL_REQUEST 0x01 /* poll for request completion */ +#define ADV_SCSIQ_DONE 0x02 /* request done */ +#define ADV_DONT_RETRY 0x08 /* don't do retry */ + +#define ADV_CHIP_ASC3550 0x01 /* Ultra-Wide IC */ +#define ADV_CHIP_ASC38C0800 0x02 /* Ultra2-Wide/LVD IC */ +#define ADV_CHIP_ASC38C1600 0x03 /* Ultra3-Wide/LVD2 IC */ + +/* + * Adapter temporary configuration structure + * + * This structure can be discarded after initialization. Don't add + * fields here needed after initialization. + * + * Field naming convention: + * + * *_enable indicates the field enables or disables a feature. The + * value of the field is never reset. + */ +typedef struct adv_dvc_cfg { + ushort disc_enable; /* enable disconnection */ + uchar chip_version; /* chip version */ + uchar termination; /* Term. Ctrl. bits 6-5 of SCSI_CFG1 register */ + ushort control_flag; /* Microcode Control Flag */ + ushort mcode_date; /* Microcode date */ + ushort mcode_version; /* Microcode version */ + ushort serial1; /* EEPROM serial number word 1 */ + ushort serial2; /* EEPROM serial number word 2 */ + ushort serial3; /* EEPROM serial number word 3 */ +} ADV_DVC_CFG; + +struct adv_dvc_var; +struct adv_scsi_req_q; + +typedef struct asc_sg_block { + uchar reserved1; + uchar reserved2; + uchar reserved3; + uchar sg_cnt; /* Valid entries in block. */ + ADV_PADDR sg_ptr; /* Pointer to next sg block. */ + struct { + ADV_PADDR sg_addr; /* SG element address. */ + ADV_DCNT sg_count; /* SG element count. */ + } sg_list[NO_OF_SG_PER_BLOCK]; +} ADV_SG_BLOCK; + +/* + * ADV_SCSI_REQ_Q - microcode request structure + * + * All fields in this structure up to byte 60 are used by the microcode. + * The microcode makes assumptions about the size and ordering of fields + * in this structure. Do not change the structure definition here without + * coordinating the change with the microcode. + * + * All fields accessed by microcode must be maintained in little_endian + * order. + */ +typedef struct adv_scsi_req_q { + uchar cntl; /* Ucode flags and state (ASC_MC_QC_*). */ + uchar target_cmd; + uchar target_id; /* Device target identifier. */ + uchar target_lun; /* Device target logical unit number. */ + ADV_PADDR data_addr; /* Data buffer physical address. */ + ADV_DCNT data_cnt; /* Data count. Ucode sets to residual. */ + ADV_PADDR sense_addr; + ADV_PADDR carr_pa; + uchar mflag; + uchar sense_len; + uchar cdb_len; /* SCSI CDB length. Must <= 16 bytes. */ + uchar scsi_cntl; + uchar done_status; /* Completion status. */ + uchar scsi_status; /* SCSI status byte. */ + uchar host_status; /* Ucode host status. */ + uchar sg_working_ix; + uchar cdb[12]; /* SCSI CDB bytes 0-11. */ + ADV_PADDR sg_real_addr; /* SG list physical address. */ + ADV_PADDR scsiq_rptr; + uchar cdb16[4]; /* SCSI CDB bytes 12-15. */ + ADV_VADDR scsiq_ptr; + ADV_VADDR carr_va; + /* + * End of microcode structure - 60 bytes. The rest of the structure + * is used by the Adv Library and ignored by the microcode. + */ + ADV_VADDR srb_ptr; + ADV_SG_BLOCK *sg_list_ptr; /* SG list virtual address. */ + char *vdata_addr; /* Data buffer virtual address. */ + uchar a_flag; + uchar pad[2]; /* Pad out to a word boundary. */ +} ADV_SCSI_REQ_Q; + +/* + * The following two structures are used to process Wide Board requests. + * + * The ADV_SCSI_REQ_Q structure in adv_req_t is passed to the Adv Library + * and microcode with the ADV_SCSI_REQ_Q field 'srb_ptr' pointing to the + * adv_req_t. The adv_req_t structure 'cmndp' field in turn points to the + * Mid-Level SCSI request structure. + * + * Zero or more ADV_SG_BLOCK are used with each ADV_SCSI_REQ_Q. Each + * ADV_SG_BLOCK structure holds 15 scatter-gather elements. Under Linux + * up to 255 scatter-gather elements may be used per request or + * ADV_SCSI_REQ_Q. + * + * Both structures must be 32 byte aligned. + */ +typedef struct adv_sgblk { + ADV_SG_BLOCK sg_block; /* Sgblock structure. */ + uchar align[32]; /* Sgblock structure padding. */ + struct adv_sgblk *next_sgblkp; /* Next scatter-gather structure. */ +} adv_sgblk_t; + +typedef struct adv_req { + ADV_SCSI_REQ_Q scsi_req_q; /* Adv Library request structure. */ + uchar align[32]; /* Request structure padding. */ + struct scsi_cmnd *cmndp; /* Mid-Level SCSI command pointer. */ + adv_sgblk_t *sgblkp; /* Adv Library scatter-gather pointer. */ + struct adv_req *next_reqp; /* Next Request Structure. */ +} adv_req_t; + +/* + * Adapter operation variable structure. + * + * One structure is required per host adapter. + * + * Field naming convention: + * + * *_able indicates both whether a feature should be enabled or disabled + * and whether a device isi capable of the feature. At initialization + * this field may be set, but later if a device is found to be incapable + * of the feature, the field is cleared. + */ +typedef struct adv_dvc_var { + AdvPortAddr iop_base; /* I/O port address */ + ushort err_code; /* fatal error code */ + ushort bios_ctrl; /* BIOS control word, EEPROM word 12 */ + ushort wdtr_able; /* try WDTR for a device */ + ushort sdtr_able; /* try SDTR for a device */ + ushort ultra_able; /* try SDTR Ultra speed for a device */ + ushort sdtr_speed1; /* EEPROM SDTR Speed for TID 0-3 */ + ushort sdtr_speed2; /* EEPROM SDTR Speed for TID 4-7 */ + ushort sdtr_speed3; /* EEPROM SDTR Speed for TID 8-11 */ + ushort sdtr_speed4; /* EEPROM SDTR Speed for TID 12-15 */ + ushort tagqng_able; /* try tagged queuing with a device */ + ushort ppr_able; /* PPR message capable per TID bitmask. */ + uchar max_dvc_qng; /* maximum number of tagged commands per device */ + ushort start_motor; /* start motor command allowed */ + uchar scsi_reset_wait; /* delay in seconds after scsi bus reset */ + uchar chip_no; /* should be assigned by caller */ + uchar max_host_qng; /* maximum number of Q'ed command allowed */ + ushort no_scam; /* scam_tolerant of EEPROM */ + struct asc_board *drv_ptr; /* driver pointer to private structure */ + uchar chip_scsi_id; /* chip SCSI target ID */ + uchar chip_type; + uchar bist_err_code; + ADV_CARR_T *carrier_buf; + ADV_CARR_T *carr_freelist; /* Carrier free list. */ + ADV_CARR_T *icq_sp; /* Initiator command queue stopper pointer. */ + ADV_CARR_T *irq_sp; /* Initiator response queue stopper pointer. */ + ushort carr_pending_cnt; /* Count of pending carriers. */ + struct adv_req *orig_reqp; /* adv_req_t memory block. */ + /* + * Note: The following fields will not be used after initialization. The + * driver may discard the buffer after initialization is done. + */ + ADV_DVC_CFG *cfg; /* temporary configuration structure */ +} ADV_DVC_VAR; + +/* + * Microcode idle loop commands + */ +#define IDLE_CMD_COMPLETED 0 +#define IDLE_CMD_STOP_CHIP 0x0001 +#define IDLE_CMD_STOP_CHIP_SEND_INT 0x0002 +#define IDLE_CMD_SEND_INT 0x0004 +#define IDLE_CMD_ABORT 0x0008 +#define IDLE_CMD_DEVICE_RESET 0x0010 +#define IDLE_CMD_SCSI_RESET_START 0x0020 /* Assert SCSI Bus Reset */ +#define IDLE_CMD_SCSI_RESET_END 0x0040 /* Deassert SCSI Bus Reset */ +#define IDLE_CMD_SCSIREQ 0x0080 + +#define IDLE_CMD_STATUS_SUCCESS 0x0001 +#define IDLE_CMD_STATUS_FAILURE 0x0002 + +/* + * AdvSendIdleCmd() flag definitions. + */ +#define ADV_NOWAIT 0x01 + +/* + * Wait loop time out values. + */ +#define SCSI_WAIT_100_MSEC 100UL /* 100 milliseconds */ +#define SCSI_US_PER_MSEC 1000 /* microseconds per millisecond */ +#define SCSI_MAX_RETRY 10 /* retry count */ + +#define ADV_ASYNC_RDMA_FAILURE 0x01 /* Fatal RDMA failure. */ +#define ADV_ASYNC_SCSI_BUS_RESET_DET 0x02 /* Detected SCSI Bus Reset. */ +#define ADV_ASYNC_CARRIER_READY_FAILURE 0x03 /* Carrier Ready failure. */ +#define ADV_RDMA_IN_CARR_AND_Q_INVALID 0x04 /* RDMAed-in data invalid. */ + +#define ADV_HOST_SCSI_BUS_RESET 0x80 /* Host Initiated SCSI Bus Reset. */ + +/* Read byte from a register. */ +#define AdvReadByteRegister(iop_base, reg_off) \ + (ADV_MEM_READB((iop_base) + (reg_off))) + +/* Write byte to a register. */ +#define AdvWriteByteRegister(iop_base, reg_off, byte) \ + (ADV_MEM_WRITEB((iop_base) + (reg_off), (byte))) + +/* Read word (2 bytes) from a register. */ +#define AdvReadWordRegister(iop_base, reg_off) \ + (ADV_MEM_READW((iop_base) + (reg_off))) + +/* Write word (2 bytes) to a register. */ +#define AdvWriteWordRegister(iop_base, reg_off, word) \ + (ADV_MEM_WRITEW((iop_base) + (reg_off), (word))) + +/* Write dword (4 bytes) to a register. */ +#define AdvWriteDWordRegister(iop_base, reg_off, dword) \ + (ADV_MEM_WRITEDW((iop_base) + (reg_off), (dword))) + +/* Read byte from LRAM. */ +#define AdvReadByteLram(iop_base, addr, byte) \ +do { \ + ADV_MEM_WRITEW((iop_base) + IOPW_RAM_ADDR, (addr)); \ + (byte) = ADV_MEM_READB((iop_base) + IOPB_RAM_DATA); \ +} while (0) + +/* Write byte to LRAM. */ +#define AdvWriteByteLram(iop_base, addr, byte) \ + (ADV_MEM_WRITEW((iop_base) + IOPW_RAM_ADDR, (addr)), \ + ADV_MEM_WRITEB((iop_base) + IOPB_RAM_DATA, (byte))) + +/* Read word (2 bytes) from LRAM. */ +#define AdvReadWordLram(iop_base, addr, word) \ +do { \ + ADV_MEM_WRITEW((iop_base) + IOPW_RAM_ADDR, (addr)); \ + (word) = (ADV_MEM_READW((iop_base) + IOPW_RAM_DATA)); \ +} while (0) + +/* Write word (2 bytes) to LRAM. */ +#define AdvWriteWordLram(iop_base, addr, word) \ + (ADV_MEM_WRITEW((iop_base) + IOPW_RAM_ADDR, (addr)), \ + ADV_MEM_WRITEW((iop_base) + IOPW_RAM_DATA, (word))) + +/* Write little-endian double word (4 bytes) to LRAM */ +/* Because of unspecified C language ordering don't use auto-increment. */ +#define AdvWriteDWordLramNoSwap(iop_base, addr, dword) \ + ((ADV_MEM_WRITEW((iop_base) + IOPW_RAM_ADDR, (addr)), \ + ADV_MEM_WRITEW((iop_base) + IOPW_RAM_DATA, \ + cpu_to_le16((ushort) ((dword) & 0xFFFF)))), \ + (ADV_MEM_WRITEW((iop_base) + IOPW_RAM_ADDR, (addr) + 2), \ + ADV_MEM_WRITEW((iop_base) + IOPW_RAM_DATA, \ + cpu_to_le16((ushort) ((dword >> 16) & 0xFFFF))))) + +/* Read word (2 bytes) from LRAM assuming that the address is already set. */ +#define AdvReadWordAutoIncLram(iop_base) \ + (ADV_MEM_READW((iop_base) + IOPW_RAM_DATA)) + +/* Write word (2 bytes) to LRAM assuming that the address is already set. */ +#define AdvWriteWordAutoIncLram(iop_base, word) \ + (ADV_MEM_WRITEW((iop_base) + IOPW_RAM_DATA, (word))) + +/* + * Define macro to check for Condor signature. + * + * Evaluate to ADV_TRUE if a Condor chip is found the specified port + * address 'iop_base'. Otherwise evalue to ADV_FALSE. + */ +#define AdvFindSignature(iop_base) \ + (((AdvReadByteRegister((iop_base), IOPB_CHIP_ID_1) == \ + ADV_CHIP_ID_BYTE) && \ + (AdvReadWordRegister((iop_base), IOPW_CHIP_ID_0) == \ + ADV_CHIP_ID_WORD)) ? ADV_TRUE : ADV_FALSE) + +/* + * Define macro to Return the version number of the chip at 'iop_base'. + * + * The second parameter 'bus_type' is currently unused. + */ +#define AdvGetChipVersion(iop_base, bus_type) \ + AdvReadByteRegister((iop_base), IOPB_CHIP_TYPE_REV) + +/* + * Abort an SRB in the chip's RISC Memory. The 'srb_ptr' argument must + * match the ASC_SCSI_REQ_Q 'srb_ptr' field. + * + * If the request has not yet been sent to the device it will simply be + * aborted from RISC memory. If the request is disconnected it will be + * aborted on reselection by sending an Abort Message to the target ID. + * + * Return value: + * ADV_TRUE(1) - Queue was successfully aborted. + * ADV_FALSE(0) - Queue was not found on the active queue list. + */ +#define AdvAbortQueue(asc_dvc, scsiq) \ + AdvSendIdleCmd((asc_dvc), (ushort) IDLE_CMD_ABORT, \ + (ADV_DCNT) (scsiq)) + +/* + * Send a Bus Device Reset Message to the specified target ID. + * + * All outstanding commands will be purged if sending the + * Bus Device Reset Message is successful. + * + * Return Value: + * ADV_TRUE(1) - All requests on the target are purged. + * ADV_FALSE(0) - Couldn't issue Bus Device Reset Message; Requests + * are not purged. + */ +#define AdvResetDevice(asc_dvc, target_id) \ + AdvSendIdleCmd((asc_dvc), (ushort) IDLE_CMD_DEVICE_RESET, \ + (ADV_DCNT) (target_id)) + +/* + * SCSI Wide Type definition. + */ +#define ADV_SCSI_BIT_ID_TYPE ushort + +/* + * AdvInitScsiTarget() 'cntl_flag' options. + */ +#define ADV_SCAN_LUN 0x01 +#define ADV_CAPINFO_NOLUN 0x02 + +/* + * Convert target id to target id bit mask. + */ +#define ADV_TID_TO_TIDMASK(tid) (0x01 << ((tid) & ADV_MAX_TID)) + +/* + * ASC_SCSI_REQ_Q 'done_status' and 'host_status' return values. + */ + +#define QD_NO_STATUS 0x00 /* Request not completed yet. */ +#define QD_NO_ERROR 0x01 +#define QD_ABORTED_BY_HOST 0x02 +#define QD_WITH_ERROR 0x04 + +#define QHSTA_NO_ERROR 0x00 +#define QHSTA_M_SEL_TIMEOUT 0x11 +#define QHSTA_M_DATA_OVER_RUN 0x12 +#define QHSTA_M_UNEXPECTED_BUS_FREE 0x13 +#define QHSTA_M_QUEUE_ABORTED 0x15 +#define QHSTA_M_SXFR_SDMA_ERR 0x16 /* SXFR_STATUS SCSI DMA Error */ +#define QHSTA_M_SXFR_SXFR_PERR 0x17 /* SXFR_STATUS SCSI Bus Parity Error */ +#define QHSTA_M_RDMA_PERR 0x18 /* RISC PCI DMA parity error */ +#define QHSTA_M_SXFR_OFF_UFLW 0x19 /* SXFR_STATUS Offset Underflow */ +#define QHSTA_M_SXFR_OFF_OFLW 0x20 /* SXFR_STATUS Offset Overflow */ +#define QHSTA_M_SXFR_WD_TMO 0x21 /* SXFR_STATUS Watchdog Timeout */ +#define QHSTA_M_SXFR_DESELECTED 0x22 /* SXFR_STATUS Deselected */ +/* Note: QHSTA_M_SXFR_XFR_OFLW is identical to QHSTA_M_DATA_OVER_RUN. */ +#define QHSTA_M_SXFR_XFR_OFLW 0x12 /* SXFR_STATUS Transfer Overflow */ +#define QHSTA_M_SXFR_XFR_PH_ERR 0x24 /* SXFR_STATUS Transfer Phase Error */ +#define QHSTA_M_SXFR_UNKNOWN_ERROR 0x25 /* SXFR_STATUS Unknown Error */ +#define QHSTA_M_SCSI_BUS_RESET 0x30 /* Request aborted from SBR */ +#define QHSTA_M_SCSI_BUS_RESET_UNSOL 0x31 /* Request aborted from unsol. SBR */ +#define QHSTA_M_BUS_DEVICE_RESET 0x32 /* Request aborted from BDR */ +#define QHSTA_M_DIRECTION_ERR 0x35 /* Data Phase mismatch */ +#define QHSTA_M_DIRECTION_ERR_HUNG 0x36 /* Data Phase mismatch and bus hang */ +#define QHSTA_M_WTM_TIMEOUT 0x41 +#define QHSTA_M_BAD_CMPL_STATUS_IN 0x42 +#define QHSTA_M_NO_AUTO_REQ_SENSE 0x43 +#define QHSTA_M_AUTO_REQ_SENSE_FAIL 0x44 +#define QHSTA_M_INVALID_DEVICE 0x45 /* Bad target ID */ +#define QHSTA_M_FROZEN_TIDQ 0x46 /* TID Queue frozen. */ +#define QHSTA_M_SGBACKUP_ERROR 0x47 /* Scatter-Gather backup error */ + +/* Return the address that is aligned at the next doubleword >= to 'addr'. */ +#define ADV_8BALIGN(addr) (((ulong) (addr) + 0x7) & ~0x7) +#define ADV_16BALIGN(addr) (((ulong) (addr) + 0xF) & ~0xF) +#define ADV_32BALIGN(addr) (((ulong) (addr) + 0x1F) & ~0x1F) + +/* + * Total contiguous memory needed for driver SG blocks. + * + * ADV_MAX_SG_LIST must be defined by a driver. It is the maximum + * number of scatter-gather elements the driver supports in a + * single request. + */ + +#define ADV_SG_LIST_MAX_BYTE_SIZE \ + (sizeof(ADV_SG_BLOCK) * \ + ((ADV_MAX_SG_LIST + (NO_OF_SG_PER_BLOCK - 1))/NO_OF_SG_PER_BLOCK)) + +/* struct asc_board flags */ +#define ASC_IS_WIDE_BOARD 0x04 /* AdvanSys Wide Board */ + +#define ASC_NARROW_BOARD(boardp) (((boardp)->flags & ASC_IS_WIDE_BOARD) == 0) + +#define NO_ISA_DMA 0xff /* No ISA DMA Channel Used */ + +#define ASC_INFO_SIZE 128 /* advansys_info() line size */ + +/* Asc Library return codes */ +#define ASC_TRUE 1 +#define ASC_FALSE 0 +#define ASC_NOERROR 1 +#define ASC_BUSY 0 +#define ASC_ERROR (-1) + +/* struct scsi_cmnd function return codes */ +#define STATUS_BYTE(byte) (byte) +#define MSG_BYTE(byte) ((byte) << 8) +#define HOST_BYTE(byte) ((byte) << 16) +#define DRIVER_BYTE(byte) ((byte) << 24) + +#define ASC_STATS(shost, counter) ASC_STATS_ADD(shost, counter, 1) +#ifndef ADVANSYS_STATS +#define ASC_STATS_ADD(shost, counter, count) +#else /* ADVANSYS_STATS */ +#define ASC_STATS_ADD(shost, counter, count) \ + (((struct asc_board *) shost_priv(shost))->asc_stats.counter += (count)) +#endif /* ADVANSYS_STATS */ + +/* If the result wraps when calculating tenths, return 0. */ +#define ASC_TENTHS(num, den) \ + (((10 * ((num)/(den))) > (((num) * 10)/(den))) ? \ + 0 : ((((num) * 10)/(den)) - (10 * ((num)/(den))))) + +/* + * Display a message to the console. + */ +#define ASC_PRINT(s) \ + { \ + printk("advansys: "); \ + printk(s); \ + } + +#define ASC_PRINT1(s, a1) \ + { \ + printk("advansys: "); \ + printk((s), (a1)); \ + } + +#define ASC_PRINT2(s, a1, a2) \ + { \ + printk("advansys: "); \ + printk((s), (a1), (a2)); \ + } + +#define ASC_PRINT3(s, a1, a2, a3) \ + { \ + printk("advansys: "); \ + printk((s), (a1), (a2), (a3)); \ + } + +#define ASC_PRINT4(s, a1, a2, a3, a4) \ + { \ + printk("advansys: "); \ + printk((s), (a1), (a2), (a3), (a4)); \ + } + +#ifndef ADVANSYS_DEBUG + +#define ASC_DBG(lvl, s...) +#define ASC_DBG_PRT_SCSI_HOST(lvl, s) +#define ASC_DBG_PRT_ASC_SCSI_Q(lvl, scsiqp) +#define ASC_DBG_PRT_ADV_SCSI_REQ_Q(lvl, scsiqp) +#define ASC_DBG_PRT_ASC_QDONE_INFO(lvl, qdone) +#define ADV_DBG_PRT_ADV_SCSI_REQ_Q(lvl, scsiqp) +#define ASC_DBG_PRT_HEX(lvl, name, start, length) +#define ASC_DBG_PRT_CDB(lvl, cdb, len) +#define ASC_DBG_PRT_SENSE(lvl, sense, len) +#define ASC_DBG_PRT_INQUIRY(lvl, inq, len) + +#else /* ADVANSYS_DEBUG */ + +/* + * Debugging Message Levels: + * 0: Errors Only + * 1: High-Level Tracing + * 2-N: Verbose Tracing + */ + +#define ASC_DBG(lvl, format, arg...) { \ + if (asc_dbglvl >= (lvl)) \ + printk(KERN_DEBUG "%s: %s: " format, DRV_NAME, \ + __func__ , ## arg); \ +} + +#define ASC_DBG_PRT_SCSI_HOST(lvl, s) \ + { \ + if (asc_dbglvl >= (lvl)) { \ + asc_prt_scsi_host(s); \ + } \ + } + +#define ASC_DBG_PRT_ASC_SCSI_Q(lvl, scsiqp) \ + { \ + if (asc_dbglvl >= (lvl)) { \ + asc_prt_asc_scsi_q(scsiqp); \ + } \ + } + +#define ASC_DBG_PRT_ASC_QDONE_INFO(lvl, qdone) \ + { \ + if (asc_dbglvl >= (lvl)) { \ + asc_prt_asc_qdone_info(qdone); \ + } \ + } + +#define ASC_DBG_PRT_ADV_SCSI_REQ_Q(lvl, scsiqp) \ + { \ + if (asc_dbglvl >= (lvl)) { \ + asc_prt_adv_scsi_req_q(scsiqp); \ + } \ + } + +#define ASC_DBG_PRT_HEX(lvl, name, start, length) \ + { \ + if (asc_dbglvl >= (lvl)) { \ + asc_prt_hex((name), (start), (length)); \ + } \ + } + +#define ASC_DBG_PRT_CDB(lvl, cdb, len) \ + ASC_DBG_PRT_HEX((lvl), "CDB", (uchar *) (cdb), (len)); + +#define ASC_DBG_PRT_SENSE(lvl, sense, len) \ + ASC_DBG_PRT_HEX((lvl), "SENSE", (uchar *) (sense), (len)); + +#define ASC_DBG_PRT_INQUIRY(lvl, inq, len) \ + ASC_DBG_PRT_HEX((lvl), "INQUIRY", (uchar *) (inq), (len)); +#endif /* ADVANSYS_DEBUG */ + +#ifdef ADVANSYS_STATS + +/* Per board statistics structure */ +struct asc_stats { + /* Driver Entrypoint Statistics */ + ADV_DCNT queuecommand; /* # calls to advansys_queuecommand() */ + ADV_DCNT reset; /* # calls to advansys_eh_bus_reset() */ + ADV_DCNT biosparam; /* # calls to advansys_biosparam() */ + ADV_DCNT interrupt; /* # advansys_interrupt() calls */ + ADV_DCNT callback; /* # calls to asc/adv_isr_callback() */ + ADV_DCNT done; /* # calls to request's scsi_done function */ + ADV_DCNT build_error; /* # asc/adv_build_req() ASC_ERROR returns. */ + ADV_DCNT adv_build_noreq; /* # adv_build_req() adv_req_t alloc. fail. */ + ADV_DCNT adv_build_nosg; /* # adv_build_req() adv_sgblk_t alloc. fail. */ + /* AscExeScsiQueue()/AdvExeScsiQueue() Statistics */ + ADV_DCNT exe_noerror; /* # ASC_NOERROR returns. */ + ADV_DCNT exe_busy; /* # ASC_BUSY returns. */ + ADV_DCNT exe_error; /* # ASC_ERROR returns. */ + ADV_DCNT exe_unknown; /* # unknown returns. */ + /* Data Transfer Statistics */ + ADV_DCNT xfer_cnt; /* # I/O requests received */ + ADV_DCNT xfer_elem; /* # scatter-gather elements */ + ADV_DCNT xfer_sect; /* # 512-byte blocks */ +}; +#endif /* ADVANSYS_STATS */ + +/* + * Structure allocated for each board. + * + * This structure is allocated by scsi_host_alloc() at the end + * of the 'Scsi_Host' structure starting at the 'hostdata' + * field. It is guaranteed to be allocated from DMA-able memory. + */ +struct asc_board { + struct device *dev; + uint flags; /* Board flags */ + unsigned int irq; + union { + ASC_DVC_VAR asc_dvc_var; /* Narrow board */ + ADV_DVC_VAR adv_dvc_var; /* Wide board */ + } dvc_var; + union { + ASC_DVC_CFG asc_dvc_cfg; /* Narrow board */ + ADV_DVC_CFG adv_dvc_cfg; /* Wide board */ + } dvc_cfg; + ushort asc_n_io_port; /* Number I/O ports. */ + ADV_SCSI_BIT_ID_TYPE init_tidmask; /* Target init./valid mask */ + ushort reqcnt[ADV_MAX_TID + 1]; /* Starvation request count */ + ADV_SCSI_BIT_ID_TYPE queue_full; /* Queue full mask */ + ushort queue_full_cnt[ADV_MAX_TID + 1]; /* Queue full count */ + union { + ASCEEP_CONFIG asc_eep; /* Narrow EEPROM config. */ + ADVEEP_3550_CONFIG adv_3550_eep; /* 3550 EEPROM config. */ + ADVEEP_38C0800_CONFIG adv_38C0800_eep; /* 38C0800 EEPROM config. */ + ADVEEP_38C1600_CONFIG adv_38C1600_eep; /* 38C1600 EEPROM config. */ + } eep_config; + ulong last_reset; /* Saved last reset time */ + /* /proc/scsi/advansys/[0...] */ +#ifdef ADVANSYS_STATS + struct asc_stats asc_stats; /* Board statistics */ +#endif /* ADVANSYS_STATS */ + /* + * The following fields are used only for Narrow Boards. + */ + uchar sdtr_data[ASC_MAX_TID + 1]; /* SDTR information */ + /* + * The following fields are used only for Wide Boards. + */ + void __iomem *ioremap_addr; /* I/O Memory remap address. */ + ushort ioport; /* I/O Port address. */ + adv_req_t *adv_reqp; /* Request structures. */ + adv_sgblk_t *adv_sgblkp; /* Scatter-gather structures. */ + ushort bios_signature; /* BIOS Signature. */ + ushort bios_version; /* BIOS Version. */ + ushort bios_codeseg; /* BIOS Code Segment. */ + ushort bios_codelen; /* BIOS Code Segment Length. */ +}; + +#define asc_dvc_to_board(asc_dvc) container_of(asc_dvc, struct asc_board, \ + dvc_var.asc_dvc_var) +#define adv_dvc_to_board(adv_dvc) container_of(adv_dvc, struct asc_board, \ + dvc_var.adv_dvc_var) +#define adv_dvc_to_pdev(adv_dvc) to_pci_dev(adv_dvc_to_board(adv_dvc)->dev) + +#ifdef ADVANSYS_DEBUG +static int asc_dbglvl = 3; + +/* + * asc_prt_asc_dvc_var() + */ +static void asc_prt_asc_dvc_var(ASC_DVC_VAR *h) +{ + printk("ASC_DVC_VAR at addr 0x%lx\n", (ulong)h); + + printk(" iop_base 0x%x, err_code 0x%x, dvc_cntl 0x%x, bug_fix_cntl " + "%d,\n", h->iop_base, h->err_code, h->dvc_cntl, h->bug_fix_cntl); + + printk(" bus_type %d, init_sdtr 0x%x,\n", h->bus_type, + (unsigned)h->init_sdtr); + + printk(" sdtr_done 0x%x, use_tagged_qng 0x%x, unit_not_ready 0x%x, " + "chip_no 0x%x,\n", (unsigned)h->sdtr_done, + (unsigned)h->use_tagged_qng, (unsigned)h->unit_not_ready, + (unsigned)h->chip_no); + + printk(" queue_full_or_busy 0x%x, start_motor 0x%x, scsi_reset_wait " + "%u,\n", (unsigned)h->queue_full_or_busy, + (unsigned)h->start_motor, (unsigned)h->scsi_reset_wait); + + printk(" is_in_int %u, max_total_qng %u, cur_total_qng %u, " + "in_critical_cnt %u,\n", (unsigned)h->is_in_int, + (unsigned)h->max_total_qng, (unsigned)h->cur_total_qng, + (unsigned)h->in_critical_cnt); + + printk(" last_q_shortage %u, init_state 0x%x, no_scam 0x%x, " + "pci_fix_asyn_xfer 0x%x,\n", (unsigned)h->last_q_shortage, + (unsigned)h->init_state, (unsigned)h->no_scam, + (unsigned)h->pci_fix_asyn_xfer); + + printk(" cfg 0x%lx\n", (ulong)h->cfg); +} + +/* + * asc_prt_asc_dvc_cfg() + */ +static void asc_prt_asc_dvc_cfg(ASC_DVC_CFG *h) +{ + printk("ASC_DVC_CFG at addr 0x%lx\n", (ulong)h); + + printk(" can_tagged_qng 0x%x, cmd_qng_enabled 0x%x,\n", + h->can_tagged_qng, h->cmd_qng_enabled); + printk(" disc_enable 0x%x, sdtr_enable 0x%x,\n", + h->disc_enable, h->sdtr_enable); + + printk(" chip_scsi_id %d, isa_dma_speed %d, isa_dma_channel %d, " + "chip_version %d,\n", h->chip_scsi_id, h->isa_dma_speed, + h->isa_dma_channel, h->chip_version); + + printk(" mcode_date 0x%x, mcode_version %d\n", + h->mcode_date, h->mcode_version); +} + +/* + * asc_prt_adv_dvc_var() + * + * Display an ADV_DVC_VAR structure. + */ +static void asc_prt_adv_dvc_var(ADV_DVC_VAR *h) +{ + printk(" ADV_DVC_VAR at addr 0x%lx\n", (ulong)h); + + printk(" iop_base 0x%lx, err_code 0x%x, ultra_able 0x%x\n", + (ulong)h->iop_base, h->err_code, (unsigned)h->ultra_able); + + printk(" sdtr_able 0x%x, wdtr_able 0x%x\n", + (unsigned)h->sdtr_able, (unsigned)h->wdtr_able); + + printk(" start_motor 0x%x, scsi_reset_wait 0x%x\n", + (unsigned)h->start_motor, (unsigned)h->scsi_reset_wait); + + printk(" max_host_qng %u, max_dvc_qng %u, carr_freelist 0x%lxn\n", + (unsigned)h->max_host_qng, (unsigned)h->max_dvc_qng, + (ulong)h->carr_freelist); + + printk(" icq_sp 0x%lx, irq_sp 0x%lx\n", + (ulong)h->icq_sp, (ulong)h->irq_sp); + + printk(" no_scam 0x%x, tagqng_able 0x%x\n", + (unsigned)h->no_scam, (unsigned)h->tagqng_able); + + printk(" chip_scsi_id 0x%x, cfg 0x%lx\n", + (unsigned)h->chip_scsi_id, (ulong)h->cfg); +} + +/* + * asc_prt_adv_dvc_cfg() + * + * Display an ADV_DVC_CFG structure. + */ +static void asc_prt_adv_dvc_cfg(ADV_DVC_CFG *h) +{ + printk(" ADV_DVC_CFG at addr 0x%lx\n", (ulong)h); + + printk(" disc_enable 0x%x, termination 0x%x\n", + h->disc_enable, h->termination); + + printk(" chip_version 0x%x, mcode_date 0x%x\n", + h->chip_version, h->mcode_date); + + printk(" mcode_version 0x%x, control_flag 0x%x\n", + h->mcode_version, h->control_flag); +} + +/* + * asc_prt_scsi_host() + */ +static void asc_prt_scsi_host(struct Scsi_Host *s) +{ + struct asc_board *boardp = shost_priv(s); + + printk("Scsi_Host at addr 0x%p, device %s\n", s, dev_name(boardp->dev)); + printk(" host_busy %u, host_no %d,\n", + atomic_read(&s->host_busy), s->host_no); + + printk(" base 0x%lx, io_port 0x%lx, irq %d,\n", + (ulong)s->base, (ulong)s->io_port, boardp->irq); + + printk(" dma_channel %d, this_id %d, can_queue %d,\n", + s->dma_channel, s->this_id, s->can_queue); + + printk(" cmd_per_lun %d, sg_tablesize %d, unchecked_isa_dma %d\n", + s->cmd_per_lun, s->sg_tablesize, s->unchecked_isa_dma); + + if (ASC_NARROW_BOARD(boardp)) { + asc_prt_asc_dvc_var(&boardp->dvc_var.asc_dvc_var); + asc_prt_asc_dvc_cfg(&boardp->dvc_cfg.asc_dvc_cfg); + } else { + asc_prt_adv_dvc_var(&boardp->dvc_var.adv_dvc_var); + asc_prt_adv_dvc_cfg(&boardp->dvc_cfg.adv_dvc_cfg); + } +} + +/* + * asc_prt_hex() + * + * Print hexadecimal output in 4 byte groupings 32 bytes + * or 8 double-words per line. + */ +static void asc_prt_hex(char *f, uchar *s, int l) +{ + int i; + int j; + int k; + int m; + + printk("%s: (%d bytes)\n", f, l); + + for (i = 0; i < l; i += 32) { + + /* Display a maximum of 8 double-words per line. */ + if ((k = (l - i) / 4) >= 8) { + k = 8; + m = 0; + } else { + m = (l - i) % 4; + } + + for (j = 0; j < k; j++) { + printk(" %2.2X%2.2X%2.2X%2.2X", + (unsigned)s[i + (j * 4)], + (unsigned)s[i + (j * 4) + 1], + (unsigned)s[i + (j * 4) + 2], + (unsigned)s[i + (j * 4) + 3]); + } + + switch (m) { + case 0: + default: + break; + case 1: + printk(" %2.2X", (unsigned)s[i + (j * 4)]); + break; + case 2: + printk(" %2.2X%2.2X", + (unsigned)s[i + (j * 4)], + (unsigned)s[i + (j * 4) + 1]); + break; + case 3: + printk(" %2.2X%2.2X%2.2X", + (unsigned)s[i + (j * 4) + 1], + (unsigned)s[i + (j * 4) + 2], + (unsigned)s[i + (j * 4) + 3]); + break; + } + + printk("\n"); + } +} + +/* + * asc_prt_asc_scsi_q() + */ +static void asc_prt_asc_scsi_q(ASC_SCSI_Q *q) +{ + ASC_SG_HEAD *sgp; + int i; + + printk("ASC_SCSI_Q at addr 0x%lx\n", (ulong)q); + + printk + (" target_ix 0x%x, target_lun %u, srb_ptr 0x%lx, tag_code 0x%x,\n", + q->q2.target_ix, q->q1.target_lun, (ulong)q->q2.srb_ptr, + q->q2.tag_code); + + printk + (" data_addr 0x%lx, data_cnt %lu, sense_addr 0x%lx, sense_len %u,\n", + (ulong)le32_to_cpu(q->q1.data_addr), + (ulong)le32_to_cpu(q->q1.data_cnt), + (ulong)le32_to_cpu(q->q1.sense_addr), q->q1.sense_len); + + printk(" cdbptr 0x%lx, cdb_len %u, sg_head 0x%lx, sg_queue_cnt %u\n", + (ulong)q->cdbptr, q->q2.cdb_len, + (ulong)q->sg_head, q->q1.sg_queue_cnt); + + if (q->sg_head) { + sgp = q->sg_head; + printk("ASC_SG_HEAD at addr 0x%lx\n", (ulong)sgp); + printk(" entry_cnt %u, queue_cnt %u\n", sgp->entry_cnt, + sgp->queue_cnt); + for (i = 0; i < sgp->entry_cnt; i++) { + printk(" [%u]: addr 0x%lx, bytes %lu\n", + i, (ulong)le32_to_cpu(sgp->sg_list[i].addr), + (ulong)le32_to_cpu(sgp->sg_list[i].bytes)); + } + + } +} + +/* + * asc_prt_asc_qdone_info() + */ +static void asc_prt_asc_qdone_info(ASC_QDONE_INFO *q) +{ + printk("ASC_QDONE_INFO at addr 0x%lx\n", (ulong)q); + printk(" srb_ptr 0x%lx, target_ix %u, cdb_len %u, tag_code %u,\n", + (ulong)q->d2.srb_ptr, q->d2.target_ix, q->d2.cdb_len, + q->d2.tag_code); + printk + (" done_stat 0x%x, host_stat 0x%x, scsi_stat 0x%x, scsi_msg 0x%x\n", + q->d3.done_stat, q->d3.host_stat, q->d3.scsi_stat, q->d3.scsi_msg); +} + +/* + * asc_prt_adv_sgblock() + * + * Display an ADV_SG_BLOCK structure. + */ +static void asc_prt_adv_sgblock(int sgblockno, ADV_SG_BLOCK *b) +{ + int i; + + printk(" ASC_SG_BLOCK at addr 0x%lx (sgblockno %d)\n", + (ulong)b, sgblockno); + printk(" sg_cnt %u, sg_ptr 0x%lx\n", + b->sg_cnt, (ulong)le32_to_cpu(b->sg_ptr)); + BUG_ON(b->sg_cnt > NO_OF_SG_PER_BLOCK); + if (b->sg_ptr != 0) + BUG_ON(b->sg_cnt != NO_OF_SG_PER_BLOCK); + for (i = 0; i < b->sg_cnt; i++) { + printk(" [%u]: sg_addr 0x%lx, sg_count 0x%lx\n", + i, (ulong)b->sg_list[i].sg_addr, + (ulong)b->sg_list[i].sg_count); + } +} + +/* + * asc_prt_adv_scsi_req_q() + * + * Display an ADV_SCSI_REQ_Q structure. + */ +static void asc_prt_adv_scsi_req_q(ADV_SCSI_REQ_Q *q) +{ + int sg_blk_cnt; + struct asc_sg_block *sg_ptr; + + printk("ADV_SCSI_REQ_Q at addr 0x%lx\n", (ulong)q); + + printk(" target_id %u, target_lun %u, srb_ptr 0x%lx, a_flag 0x%x\n", + q->target_id, q->target_lun, (ulong)q->srb_ptr, q->a_flag); + + printk(" cntl 0x%x, data_addr 0x%lx, vdata_addr 0x%lx\n", + q->cntl, (ulong)le32_to_cpu(q->data_addr), (ulong)q->vdata_addr); + + printk(" data_cnt %lu, sense_addr 0x%lx, sense_len %u,\n", + (ulong)le32_to_cpu(q->data_cnt), + (ulong)le32_to_cpu(q->sense_addr), q->sense_len); + + printk + (" cdb_len %u, done_status 0x%x, host_status 0x%x, scsi_status 0x%x\n", + q->cdb_len, q->done_status, q->host_status, q->scsi_status); + + printk(" sg_working_ix 0x%x, target_cmd %u\n", + q->sg_working_ix, q->target_cmd); + + printk(" scsiq_rptr 0x%lx, sg_real_addr 0x%lx, sg_list_ptr 0x%lx\n", + (ulong)le32_to_cpu(q->scsiq_rptr), + (ulong)le32_to_cpu(q->sg_real_addr), (ulong)q->sg_list_ptr); + + /* Display the request's ADV_SG_BLOCK structures. */ + if (q->sg_list_ptr != NULL) { + sg_blk_cnt = 0; + while (1) { + /* + * 'sg_ptr' is a physical address. Convert it to a virtual + * address by indexing 'sg_blk_cnt' into the virtual address + * array 'sg_list_ptr'. + * + * XXX - Assumes all SG physical blocks are virtually contiguous. + */ + sg_ptr = + &(((ADV_SG_BLOCK *)(q->sg_list_ptr))[sg_blk_cnt]); + asc_prt_adv_sgblock(sg_blk_cnt, sg_ptr); + if (sg_ptr->sg_ptr == 0) { + break; + } + sg_blk_cnt++; + } + } +} +#endif /* ADVANSYS_DEBUG */ + +/* + * The advansys chip/microcode contains a 32-bit identifier for each command + * known as the 'srb'. I don't know what it stands for. The driver used + * to encode the scsi_cmnd pointer by calling virt_to_bus and retrieve it + * with bus_to_virt. Now the driver keeps a per-host map of integers to + * pointers. It auto-expands when full, unless it can't allocate memory. + * Note that an srb of 0 is treated specially by the chip/firmware, hence + * the return of i+1 in this routine, and the corresponding subtraction in + * the inverse routine. + */ +#define BAD_SRB 0 +static u32 advansys_ptr_to_srb(struct asc_dvc_var *asc_dvc, void *ptr) +{ + int i; + void **new_ptr; + + for (i = 0; i < asc_dvc->ptr_map_count; i++) { + if (!asc_dvc->ptr_map[i]) + goto out; + } + + if (asc_dvc->ptr_map_count == 0) + asc_dvc->ptr_map_count = 1; + else + asc_dvc->ptr_map_count *= 2; + + new_ptr = krealloc(asc_dvc->ptr_map, + asc_dvc->ptr_map_count * sizeof(void *), GFP_ATOMIC); + if (!new_ptr) + return BAD_SRB; + asc_dvc->ptr_map = new_ptr; + out: + ASC_DBG(3, "Putting ptr %p into array offset %d\n", ptr, i); + asc_dvc->ptr_map[i] = ptr; + return i + 1; +} + +static void * advansys_srb_to_ptr(struct asc_dvc_var *asc_dvc, u32 srb) +{ + void *ptr; + + srb--; + if (srb >= asc_dvc->ptr_map_count) { + printk("advansys: bad SRB %u, max %u\n", srb, + asc_dvc->ptr_map_count); + return NULL; + } + ptr = asc_dvc->ptr_map[srb]; + asc_dvc->ptr_map[srb] = NULL; + ASC_DBG(3, "Returning ptr %p from array offset %d\n", ptr, srb); + return ptr; +} + +/* + * advansys_info() + * + * Return suitable for printing on the console with the argument + * adapter's configuration information. + * + * Note: The information line should not exceed ASC_INFO_SIZE bytes, + * otherwise the static 'info' array will be overrun. + */ +static const char *advansys_info(struct Scsi_Host *shost) +{ + static char info[ASC_INFO_SIZE]; + struct asc_board *boardp = shost_priv(shost); + ASC_DVC_VAR *asc_dvc_varp; + ADV_DVC_VAR *adv_dvc_varp; + char *busname; + char *widename = NULL; + + if (ASC_NARROW_BOARD(boardp)) { + asc_dvc_varp = &boardp->dvc_var.asc_dvc_var; + ASC_DBG(1, "begin\n"); + if (asc_dvc_varp->bus_type & ASC_IS_ISA) { + if ((asc_dvc_varp->bus_type & ASC_IS_ISAPNP) == + ASC_IS_ISAPNP) { + busname = "ISA PnP"; + } else { + busname = "ISA"; + } + sprintf(info, + "AdvanSys SCSI %s: %s: IO 0x%lX-0x%lX, IRQ 0x%X, DMA 0x%X", + ASC_VERSION, busname, + (ulong)shost->io_port, + (ulong)shost->io_port + ASC_IOADR_GAP - 1, + boardp->irq, shost->dma_channel); + } else { + if (asc_dvc_varp->bus_type & ASC_IS_VL) { + busname = "VL"; + } else if (asc_dvc_varp->bus_type & ASC_IS_EISA) { + busname = "EISA"; + } else if (asc_dvc_varp->bus_type & ASC_IS_PCI) { + if ((asc_dvc_varp->bus_type & ASC_IS_PCI_ULTRA) + == ASC_IS_PCI_ULTRA) { + busname = "PCI Ultra"; + } else { + busname = "PCI"; + } + } else { + busname = "?"; + shost_printk(KERN_ERR, shost, "unknown bus " + "type %d\n", asc_dvc_varp->bus_type); + } + sprintf(info, + "AdvanSys SCSI %s: %s: IO 0x%lX-0x%lX, IRQ 0x%X", + ASC_VERSION, busname, (ulong)shost->io_port, + (ulong)shost->io_port + ASC_IOADR_GAP - 1, + boardp->irq); + } + } else { + /* + * Wide Adapter Information + * + * Memory-mapped I/O is used instead of I/O space to access + * the adapter, but display the I/O Port range. The Memory + * I/O address is displayed through the driver /proc file. + */ + adv_dvc_varp = &boardp->dvc_var.adv_dvc_var; + if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) { + widename = "Ultra-Wide"; + } else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800) { + widename = "Ultra2-Wide"; + } else { + widename = "Ultra3-Wide"; + } + sprintf(info, + "AdvanSys SCSI %s: PCI %s: PCIMEM 0x%lX-0x%lX, IRQ 0x%X", + ASC_VERSION, widename, (ulong)adv_dvc_varp->iop_base, + (ulong)adv_dvc_varp->iop_base + boardp->asc_n_io_port - 1, boardp->irq); + } + BUG_ON(strlen(info) >= ASC_INFO_SIZE); + ASC_DBG(1, "end\n"); + return info; +} + +#ifdef CONFIG_PROC_FS + +/* + * asc_prt_board_devices() + * + * Print driver information for devices attached to the board. + */ +static void asc_prt_board_devices(struct seq_file *m, struct Scsi_Host *shost) +{ + struct asc_board *boardp = shost_priv(shost); + int chip_scsi_id; + int i; + + seq_printf(m, + "\nDevice Information for AdvanSys SCSI Host %d:\n", + shost->host_no); + + if (ASC_NARROW_BOARD(boardp)) { + chip_scsi_id = boardp->dvc_cfg.asc_dvc_cfg.chip_scsi_id; + } else { + chip_scsi_id = boardp->dvc_var.adv_dvc_var.chip_scsi_id; + } + + seq_puts(m, "Target IDs Detected:"); + for (i = 0; i <= ADV_MAX_TID; i++) { + if (boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) + seq_printf(m, " %X,", i); + } + seq_printf(m, " (%X=Host Adapter)\n", chip_scsi_id); +} + +/* + * Display Wide Board BIOS Information. + */ +static void asc_prt_adv_bios(struct seq_file *m, struct Scsi_Host *shost) +{ + struct asc_board *boardp = shost_priv(shost); + ushort major, minor, letter; + + seq_puts(m, "\nROM BIOS Version: "); + + /* + * If the BIOS saved a valid signature, then fill in + * the BIOS code segment base address. + */ + if (boardp->bios_signature != 0x55AA) { + seq_puts(m, "Disabled or Pre-3.1\n" + "BIOS either disabled or Pre-3.1. If it is pre-3.1, then a newer version\n" + "can be found at the ConnectCom FTP site: ftp://ftp.connectcom.net/pub\n"); + } else { + major = (boardp->bios_version >> 12) & 0xF; + minor = (boardp->bios_version >> 8) & 0xF; + letter = (boardp->bios_version & 0xFF); + + seq_printf(m, "%d.%d%c\n", + major, minor, + letter >= 26 ? '?' : letter + 'A'); + /* + * Current available ROM BIOS release is 3.1I for UW + * and 3.2I for U2W. This code doesn't differentiate + * UW and U2W boards. + */ + if (major < 3 || (major <= 3 && minor < 1) || + (major <= 3 && minor <= 1 && letter < ('I' - 'A'))) { + seq_puts(m, "Newer version of ROM BIOS is available at the ConnectCom FTP site:\n" + "ftp://ftp.connectcom.net/pub\n"); + } + } +} + +/* + * Add serial number to information bar if signature AAh + * is found in at bit 15-9 (7 bits) of word 1. + * + * Serial Number consists fo 12 alpha-numeric digits. + * + * 1 - Product type (A,B,C,D..) Word0: 15-13 (3 bits) + * 2 - MFG Location (A,B,C,D..) Word0: 12-10 (3 bits) + * 3-4 - Product ID (0-99) Word0: 9-0 (10 bits) + * 5 - Product revision (A-J) Word0: " " + * + * Signature Word1: 15-9 (7 bits) + * 6 - Year (0-9) Word1: 8-6 (3 bits) & Word2: 15 (1 bit) + * 7-8 - Week of the year (1-52) Word1: 5-0 (6 bits) + * + * 9-12 - Serial Number (A001-Z999) Word2: 14-0 (15 bits) + * + * Note 1: Only production cards will have a serial number. + * + * Note 2: Signature is most significant 7 bits (0xFE). + * + * Returns ASC_TRUE if serial number found, otherwise returns ASC_FALSE. + */ +static int asc_get_eeprom_string(ushort *serialnum, uchar *cp) +{ + ushort w, num; + + if ((serialnum[1] & 0xFE00) != ((ushort)0xAA << 8)) { + return ASC_FALSE; + } else { + /* + * First word - 6 digits. + */ + w = serialnum[0]; + + /* Product type - 1st digit. */ + if ((*cp = 'A' + ((w & 0xE000) >> 13)) == 'H') { + /* Product type is P=Prototype */ + *cp += 0x8; + } + cp++; + + /* Manufacturing location - 2nd digit. */ + *cp++ = 'A' + ((w & 0x1C00) >> 10); + + /* Product ID - 3rd, 4th digits. */ + num = w & 0x3FF; + *cp++ = '0' + (num / 100); + num %= 100; + *cp++ = '0' + (num / 10); + + /* Product revision - 5th digit. */ + *cp++ = 'A' + (num % 10); + + /* + * Second word + */ + w = serialnum[1]; + + /* + * Year - 6th digit. + * + * If bit 15 of third word is set, then the + * last digit of the year is greater than 7. + */ + if (serialnum[2] & 0x8000) { + *cp++ = '8' + ((w & 0x1C0) >> 6); + } else { + *cp++ = '0' + ((w & 0x1C0) >> 6); + } + + /* Week of year - 7th, 8th digits. */ + num = w & 0x003F; + *cp++ = '0' + num / 10; + num %= 10; + *cp++ = '0' + num; + + /* + * Third word + */ + w = serialnum[2] & 0x7FFF; + + /* Serial number - 9th digit. */ + *cp++ = 'A' + (w / 1000); + + /* 10th, 11th, 12th digits. */ + num = w % 1000; + *cp++ = '0' + num / 100; + num %= 100; + *cp++ = '0' + num / 10; + num %= 10; + *cp++ = '0' + num; + + *cp = '\0'; /* Null Terminate the string. */ + return ASC_TRUE; + } +} + +/* + * asc_prt_asc_board_eeprom() + * + * Print board EEPROM configuration. + */ +static void asc_prt_asc_board_eeprom(struct seq_file *m, struct Scsi_Host *shost) +{ + struct asc_board *boardp = shost_priv(shost); + ASC_DVC_VAR *asc_dvc_varp; + ASCEEP_CONFIG *ep; + int i; +#ifdef CONFIG_ISA + int isa_dma_speed[] = { 10, 8, 7, 6, 5, 4, 3, 2 }; +#endif /* CONFIG_ISA */ + uchar serialstr[13]; + + asc_dvc_varp = &boardp->dvc_var.asc_dvc_var; + ep = &boardp->eep_config.asc_eep; + + seq_printf(m, + "\nEEPROM Settings for AdvanSys SCSI Host %d:\n", + shost->host_no); + + if (asc_get_eeprom_string((ushort *)&ep->adapter_info[0], serialstr) + == ASC_TRUE) + seq_printf(m, " Serial Number: %s\n", serialstr); + else if (ep->adapter_info[5] == 0xBB) + seq_puts(m, + " Default Settings Used for EEPROM-less Adapter.\n"); + else + seq_puts(m, " Serial Number Signature Not Present.\n"); + + seq_printf(m, + " Host SCSI ID: %u, Host Queue Size: %u, Device Queue Size: %u\n", + ASC_EEP_GET_CHIP_ID(ep), ep->max_total_qng, + ep->max_tag_qng); + + seq_printf(m, + " cntl 0x%x, no_scam 0x%x\n", ep->cntl, ep->no_scam); + + seq_puts(m, " Target ID: "); + for (i = 0; i <= ASC_MAX_TID; i++) + seq_printf(m, " %d", i); + + seq_puts(m, "\n Disconnects: "); + for (i = 0; i <= ASC_MAX_TID; i++) + seq_printf(m, " %c", + (ep->disc_enable & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N'); + + seq_puts(m, "\n Command Queuing: "); + for (i = 0; i <= ASC_MAX_TID; i++) + seq_printf(m, " %c", + (ep->use_cmd_qng & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N'); + + seq_puts(m, "\n Start Motor: "); + for (i = 0; i <= ASC_MAX_TID; i++) + seq_printf(m, " %c", + (ep->start_motor & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N'); + + seq_puts(m, "\n Synchronous Transfer:"); + for (i = 0; i <= ASC_MAX_TID; i++) + seq_printf(m, " %c", + (ep->init_sdtr & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N'); + seq_putc(m, '\n'); + +#ifdef CONFIG_ISA + if (asc_dvc_varp->bus_type & ASC_IS_ISA) { + seq_printf(m, + " Host ISA DMA speed: %d MB/S\n", + isa_dma_speed[ASC_EEP_GET_DMA_SPD(ep)]); + } +#endif /* CONFIG_ISA */ +} + +/* + * asc_prt_adv_board_eeprom() + * + * Print board EEPROM configuration. + */ +static void asc_prt_adv_board_eeprom(struct seq_file *m, struct Scsi_Host *shost) +{ + struct asc_board *boardp = shost_priv(shost); + ADV_DVC_VAR *adv_dvc_varp; + int i; + char *termstr; + uchar serialstr[13]; + ADVEEP_3550_CONFIG *ep_3550 = NULL; + ADVEEP_38C0800_CONFIG *ep_38C0800 = NULL; + ADVEEP_38C1600_CONFIG *ep_38C1600 = NULL; + ushort word; + ushort *wordp; + ushort sdtr_speed = 0; + + adv_dvc_varp = &boardp->dvc_var.adv_dvc_var; + if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) { + ep_3550 = &boardp->eep_config.adv_3550_eep; + } else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800) { + ep_38C0800 = &boardp->eep_config.adv_38C0800_eep; + } else { + ep_38C1600 = &boardp->eep_config.adv_38C1600_eep; + } + + seq_printf(m, + "\nEEPROM Settings for AdvanSys SCSI Host %d:\n", + shost->host_no); + + if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) { + wordp = &ep_3550->serial_number_word1; + } else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800) { + wordp = &ep_38C0800->serial_number_word1; + } else { + wordp = &ep_38C1600->serial_number_word1; + } + + if (asc_get_eeprom_string(wordp, serialstr) == ASC_TRUE) + seq_printf(m, " Serial Number: %s\n", serialstr); + else + seq_puts(m, " Serial Number Signature Not Present.\n"); + + if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) + seq_printf(m, + " Host SCSI ID: %u, Host Queue Size: %u, Device Queue Size: %u\n", + ep_3550->adapter_scsi_id, + ep_3550->max_host_qng, ep_3550->max_dvc_qng); + else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800) + seq_printf(m, + " Host SCSI ID: %u, Host Queue Size: %u, Device Queue Size: %u\n", + ep_38C0800->adapter_scsi_id, + ep_38C0800->max_host_qng, + ep_38C0800->max_dvc_qng); + else + seq_printf(m, + " Host SCSI ID: %u, Host Queue Size: %u, Device Queue Size: %u\n", + ep_38C1600->adapter_scsi_id, + ep_38C1600->max_host_qng, + ep_38C1600->max_dvc_qng); + if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) { + word = ep_3550->termination; + } else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800) { + word = ep_38C0800->termination_lvd; + } else { + word = ep_38C1600->termination_lvd; + } + switch (word) { + case 1: + termstr = "Low Off/High Off"; + break; + case 2: + termstr = "Low Off/High On"; + break; + case 3: + termstr = "Low On/High On"; + break; + default: + case 0: + termstr = "Automatic"; + break; + } + + if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) + seq_printf(m, + " termination: %u (%s), bios_ctrl: 0x%x\n", + ep_3550->termination, termstr, + ep_3550->bios_ctrl); + else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800) + seq_printf(m, + " termination: %u (%s), bios_ctrl: 0x%x\n", + ep_38C0800->termination_lvd, termstr, + ep_38C0800->bios_ctrl); + else + seq_printf(m, + " termination: %u (%s), bios_ctrl: 0x%x\n", + ep_38C1600->termination_lvd, termstr, + ep_38C1600->bios_ctrl); + + seq_puts(m, " Target ID: "); + for (i = 0; i <= ADV_MAX_TID; i++) + seq_printf(m, " %X", i); + seq_putc(m, '\n'); + + if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) { + word = ep_3550->disc_enable; + } else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800) { + word = ep_38C0800->disc_enable; + } else { + word = ep_38C1600->disc_enable; + } + seq_puts(m, " Disconnects: "); + for (i = 0; i <= ADV_MAX_TID; i++) + seq_printf(m, " %c", + (word & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N'); + seq_putc(m, '\n'); + + if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) { + word = ep_3550->tagqng_able; + } else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800) { + word = ep_38C0800->tagqng_able; + } else { + word = ep_38C1600->tagqng_able; + } + seq_puts(m, " Command Queuing: "); + for (i = 0; i <= ADV_MAX_TID; i++) + seq_printf(m, " %c", + (word & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N'); + seq_putc(m, '\n'); + + if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) { + word = ep_3550->start_motor; + } else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800) { + word = ep_38C0800->start_motor; + } else { + word = ep_38C1600->start_motor; + } + seq_puts(m, " Start Motor: "); + for (i = 0; i <= ADV_MAX_TID; i++) + seq_printf(m, " %c", + (word & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N'); + seq_putc(m, '\n'); + + if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) { + seq_puts(m, " Synchronous Transfer:"); + for (i = 0; i <= ADV_MAX_TID; i++) + seq_printf(m, " %c", + (ep_3550->sdtr_able & ADV_TID_TO_TIDMASK(i)) ? + 'Y' : 'N'); + seq_putc(m, '\n'); + } + + if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) { + seq_puts(m, " Ultra Transfer: "); + for (i = 0; i <= ADV_MAX_TID; i++) + seq_printf(m, " %c", + (ep_3550->ultra_able & ADV_TID_TO_TIDMASK(i)) + ? 'Y' : 'N'); + seq_putc(m, '\n'); + } + + if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) { + word = ep_3550->wdtr_able; + } else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800) { + word = ep_38C0800->wdtr_able; + } else { + word = ep_38C1600->wdtr_able; + } + seq_puts(m, " Wide Transfer: "); + for (i = 0; i <= ADV_MAX_TID; i++) + seq_printf(m, " %c", + (word & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N'); + seq_putc(m, '\n'); + + if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800 || + adv_dvc_varp->chip_type == ADV_CHIP_ASC38C1600) { + seq_puts(m, " Synchronous Transfer Speed (Mhz):\n "); + for (i = 0; i <= ADV_MAX_TID; i++) { + char *speed_str; + + if (i == 0) { + sdtr_speed = adv_dvc_varp->sdtr_speed1; + } else if (i == 4) { + sdtr_speed = adv_dvc_varp->sdtr_speed2; + } else if (i == 8) { + sdtr_speed = adv_dvc_varp->sdtr_speed3; + } else if (i == 12) { + sdtr_speed = adv_dvc_varp->sdtr_speed4; + } + switch (sdtr_speed & ADV_MAX_TID) { + case 0: + speed_str = "Off"; + break; + case 1: + speed_str = " 5"; + break; + case 2: + speed_str = " 10"; + break; + case 3: + speed_str = " 20"; + break; + case 4: + speed_str = " 40"; + break; + case 5: + speed_str = " 80"; + break; + default: + speed_str = "Unk"; + break; + } + seq_printf(m, "%X:%s ", i, speed_str); + if (i == 7) + seq_puts(m, "\n "); + sdtr_speed >>= 4; + } + seq_putc(m, '\n'); + } +} + +/* + * asc_prt_driver_conf() + */ +static void asc_prt_driver_conf(struct seq_file *m, struct Scsi_Host *shost) +{ + struct asc_board *boardp = shost_priv(shost); + int chip_scsi_id; + + seq_printf(m, + "\nLinux Driver Configuration and Information for AdvanSys SCSI Host %d:\n", + shost->host_no); + + seq_printf(m, + " host_busy %u, max_id %u, max_lun %llu, max_channel %u\n", + atomic_read(&shost->host_busy), shost->max_id, + shost->max_lun, shost->max_channel); + + seq_printf(m, + " unique_id %d, can_queue %d, this_id %d, sg_tablesize %u, cmd_per_lun %u\n", + shost->unique_id, shost->can_queue, shost->this_id, + shost->sg_tablesize, shost->cmd_per_lun); + + seq_printf(m, + " unchecked_isa_dma %d, use_clustering %d\n", + shost->unchecked_isa_dma, shost->use_clustering); + + seq_printf(m, + " flags 0x%x, last_reset 0x%lx, jiffies 0x%lx, asc_n_io_port 0x%x\n", + boardp->flags, boardp->last_reset, jiffies, + boardp->asc_n_io_port); + + seq_printf(m, " io_port 0x%lx\n", shost->io_port); + + if (ASC_NARROW_BOARD(boardp)) { + chip_scsi_id = boardp->dvc_cfg.asc_dvc_cfg.chip_scsi_id; + } else { + chip_scsi_id = boardp->dvc_var.adv_dvc_var.chip_scsi_id; + } +} + +/* + * asc_prt_asc_board_info() + * + * Print dynamic board configuration information. + */ +static void asc_prt_asc_board_info(struct seq_file *m, struct Scsi_Host *shost) +{ + struct asc_board *boardp = shost_priv(shost); + int chip_scsi_id; + ASC_DVC_VAR *v; + ASC_DVC_CFG *c; + int i; + int renegotiate = 0; + + v = &boardp->dvc_var.asc_dvc_var; + c = &boardp->dvc_cfg.asc_dvc_cfg; + chip_scsi_id = c->chip_scsi_id; + + seq_printf(m, + "\nAsc Library Configuration and Statistics for AdvanSys SCSI Host %d:\n", + shost->host_no); + + seq_printf(m, " chip_version %u, mcode_date 0x%x, " + "mcode_version 0x%x, err_code %u\n", + c->chip_version, c->mcode_date, c->mcode_version, + v->err_code); + + /* Current number of commands waiting for the host. */ + seq_printf(m, + " Total Command Pending: %d\n", v->cur_total_qng); + + seq_puts(m, " Command Queuing:"); + for (i = 0; i <= ASC_MAX_TID; i++) { + if ((chip_scsi_id == i) || + ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) { + continue; + } + seq_printf(m, " %X:%c", + i, + (v->use_tagged_qng & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N'); + } + + /* Current number of commands waiting for a device. */ + seq_puts(m, "\n Command Queue Pending:"); + for (i = 0; i <= ASC_MAX_TID; i++) { + if ((chip_scsi_id == i) || + ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) { + continue; + } + seq_printf(m, " %X:%u", i, v->cur_dvc_qng[i]); + } + + /* Current limit on number of commands that can be sent to a device. */ + seq_puts(m, "\n Command Queue Limit:"); + for (i = 0; i <= ASC_MAX_TID; i++) { + if ((chip_scsi_id == i) || + ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) { + continue; + } + seq_printf(m, " %X:%u", i, v->max_dvc_qng[i]); + } + + /* Indicate whether the device has returned queue full status. */ + seq_puts(m, "\n Command Queue Full:"); + for (i = 0; i <= ASC_MAX_TID; i++) { + if ((chip_scsi_id == i) || + ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) { + continue; + } + if (boardp->queue_full & ADV_TID_TO_TIDMASK(i)) + seq_printf(m, " %X:Y-%d", + i, boardp->queue_full_cnt[i]); + else + seq_printf(m, " %X:N", i); + } + + seq_puts(m, "\n Synchronous Transfer:"); + for (i = 0; i <= ASC_MAX_TID; i++) { + if ((chip_scsi_id == i) || + ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) { + continue; + } + seq_printf(m, " %X:%c", + i, + (v->sdtr_done & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N'); + } + seq_putc(m, '\n'); + + for (i = 0; i <= ASC_MAX_TID; i++) { + uchar syn_period_ix; + + if ((chip_scsi_id == i) || + ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0) || + ((v->init_sdtr & ADV_TID_TO_TIDMASK(i)) == 0)) { + continue; + } + + seq_printf(m, " %X:", i); + + if ((boardp->sdtr_data[i] & ASC_SYN_MAX_OFFSET) == 0) { + seq_puts(m, " Asynchronous"); + } else { + syn_period_ix = + (boardp->sdtr_data[i] >> 4) & (v->max_sdtr_index - + 1); + + seq_printf(m, + " Transfer Period Factor: %d (%d.%d Mhz),", + v->sdtr_period_tbl[syn_period_ix], + 250 / v->sdtr_period_tbl[syn_period_ix], + ASC_TENTHS(250, + v->sdtr_period_tbl[syn_period_ix])); + + seq_printf(m, " REQ/ACK Offset: %d", + boardp->sdtr_data[i] & ASC_SYN_MAX_OFFSET); + } + + if ((v->sdtr_done & ADV_TID_TO_TIDMASK(i)) == 0) { + seq_puts(m, "*\n"); + renegotiate = 1; + } else { + seq_putc(m, '\n'); + } + } + + if (renegotiate) { + seq_puts(m, " * = Re-negotiation pending before next command.\n"); + } +} + +/* + * asc_prt_adv_board_info() + * + * Print dynamic board configuration information. + */ +static void asc_prt_adv_board_info(struct seq_file *m, struct Scsi_Host *shost) +{ + struct asc_board *boardp = shost_priv(shost); + int i; + ADV_DVC_VAR *v; + ADV_DVC_CFG *c; + AdvPortAddr iop_base; + ushort chip_scsi_id; + ushort lramword; + uchar lrambyte; + ushort tagqng_able; + ushort sdtr_able, wdtr_able; + ushort wdtr_done, sdtr_done; + ushort period = 0; + int renegotiate = 0; + + v = &boardp->dvc_var.adv_dvc_var; + c = &boardp->dvc_cfg.adv_dvc_cfg; + iop_base = v->iop_base; + chip_scsi_id = v->chip_scsi_id; + + seq_printf(m, + "\nAdv Library Configuration and Statistics for AdvanSys SCSI Host %d:\n", + shost->host_no); + + seq_printf(m, + " iop_base 0x%lx, cable_detect: %X, err_code %u\n", + (unsigned long)v->iop_base, + AdvReadWordRegister(iop_base,IOPW_SCSI_CFG1) & CABLE_DETECT, + v->err_code); + + seq_printf(m, " chip_version %u, mcode_date 0x%x, " + "mcode_version 0x%x\n", c->chip_version, + c->mcode_date, c->mcode_version); + + AdvReadWordLram(iop_base, ASC_MC_TAGQNG_ABLE, tagqng_able); + seq_puts(m, " Queuing Enabled:"); + for (i = 0; i <= ADV_MAX_TID; i++) { + if ((chip_scsi_id == i) || + ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) { + continue; + } + + seq_printf(m, " %X:%c", + i, + (tagqng_able & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N'); + } + + seq_puts(m, "\n Queue Limit:"); + for (i = 0; i <= ADV_MAX_TID; i++) { + if ((chip_scsi_id == i) || + ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) { + continue; + } + + AdvReadByteLram(iop_base, ASC_MC_NUMBER_OF_MAX_CMD + i, + lrambyte); + + seq_printf(m, " %X:%d", i, lrambyte); + } + + seq_puts(m, "\n Command Pending:"); + for (i = 0; i <= ADV_MAX_TID; i++) { + if ((chip_scsi_id == i) || + ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) { + continue; + } + + AdvReadByteLram(iop_base, ASC_MC_NUMBER_OF_QUEUED_CMD + i, + lrambyte); + + seq_printf(m, " %X:%d", i, lrambyte); + } + seq_putc(m, '\n'); + + AdvReadWordLram(iop_base, ASC_MC_WDTR_ABLE, wdtr_able); + seq_puts(m, " Wide Enabled:"); + for (i = 0; i <= ADV_MAX_TID; i++) { + if ((chip_scsi_id == i) || + ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) { + continue; + } + + seq_printf(m, " %X:%c", + i, + (wdtr_able & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N'); + } + seq_putc(m, '\n'); + + AdvReadWordLram(iop_base, ASC_MC_WDTR_DONE, wdtr_done); + seq_puts(m, " Transfer Bit Width:"); + for (i = 0; i <= ADV_MAX_TID; i++) { + if ((chip_scsi_id == i) || + ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) { + continue; + } + + AdvReadWordLram(iop_base, + ASC_MC_DEVICE_HSHK_CFG_TABLE + (2 * i), + lramword); + + seq_printf(m, " %X:%d", + i, (lramword & 0x8000) ? 16 : 8); + + if ((wdtr_able & ADV_TID_TO_TIDMASK(i)) && + (wdtr_done & ADV_TID_TO_TIDMASK(i)) == 0) { + seq_putc(m, '*'); + renegotiate = 1; + } + } + seq_putc(m, '\n'); + + AdvReadWordLram(iop_base, ASC_MC_SDTR_ABLE, sdtr_able); + seq_puts(m, " Synchronous Enabled:"); + for (i = 0; i <= ADV_MAX_TID; i++) { + if ((chip_scsi_id == i) || + ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0)) { + continue; + } + + seq_printf(m, " %X:%c", + i, + (sdtr_able & ADV_TID_TO_TIDMASK(i)) ? 'Y' : 'N'); + } + seq_putc(m, '\n'); + + AdvReadWordLram(iop_base, ASC_MC_SDTR_DONE, sdtr_done); + for (i = 0; i <= ADV_MAX_TID; i++) { + + AdvReadWordLram(iop_base, + ASC_MC_DEVICE_HSHK_CFG_TABLE + (2 * i), + lramword); + lramword &= ~0x8000; + + if ((chip_scsi_id == i) || + ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(i)) == 0) || + ((sdtr_able & ADV_TID_TO_TIDMASK(i)) == 0)) { + continue; + } + + seq_printf(m, " %X:", i); + + if ((lramword & 0x1F) == 0) { /* Check for REQ/ACK Offset 0. */ + seq_puts(m, " Asynchronous"); + } else { + seq_puts(m, " Transfer Period Factor: "); + + if ((lramword & 0x1F00) == 0x1100) { /* 80 Mhz */ + seq_puts(m, "9 (80.0 Mhz),"); + } else if ((lramword & 0x1F00) == 0x1000) { /* 40 Mhz */ + seq_puts(m, "10 (40.0 Mhz),"); + } else { /* 20 Mhz or below. */ + + period = (((lramword >> 8) * 25) + 50) / 4; + + if (period == 0) { /* Should never happen. */ + seq_printf(m, "%d (? Mhz), ", period); + } else { + seq_printf(m, + "%d (%d.%d Mhz),", + period, 250 / period, + ASC_TENTHS(250, period)); + } + } + + seq_printf(m, " REQ/ACK Offset: %d", + lramword & 0x1F); + } + + if ((sdtr_done & ADV_TID_TO_TIDMASK(i)) == 0) { + seq_puts(m, "*\n"); + renegotiate = 1; + } else { + seq_putc(m, '\n'); + } + } + + if (renegotiate) { + seq_puts(m, " * = Re-negotiation pending before next command.\n"); + } +} + +#ifdef ADVANSYS_STATS +/* + * asc_prt_board_stats() + */ +static void asc_prt_board_stats(struct seq_file *m, struct Scsi_Host *shost) +{ + struct asc_board *boardp = shost_priv(shost); + struct asc_stats *s = &boardp->asc_stats; + + seq_printf(m, + "\nLinux Driver Statistics for AdvanSys SCSI Host %d:\n", + shost->host_no); + + seq_printf(m, + " queuecommand %u, reset %u, biosparam %u, interrupt %u\n", + s->queuecommand, s->reset, s->biosparam, + s->interrupt); + + seq_printf(m, + " callback %u, done %u, build_error %u, build_noreq %u, build_nosg %u\n", + s->callback, s->done, s->build_error, + s->adv_build_noreq, s->adv_build_nosg); + + seq_printf(m, + " exe_noerror %u, exe_busy %u, exe_error %u, exe_unknown %u\n", + s->exe_noerror, s->exe_busy, s->exe_error, + s->exe_unknown); + + /* + * Display data transfer statistics. + */ + if (s->xfer_cnt > 0) { + seq_printf(m, " xfer_cnt %u, xfer_elem %u, ", + s->xfer_cnt, s->xfer_elem); + + seq_printf(m, "xfer_bytes %u.%01u kb\n", + s->xfer_sect / 2, ASC_TENTHS(s->xfer_sect, 2)); + + /* Scatter gather transfer statistics */ + seq_printf(m, " avg_num_elem %u.%01u, ", + s->xfer_elem / s->xfer_cnt, + ASC_TENTHS(s->xfer_elem, s->xfer_cnt)); + + seq_printf(m, "avg_elem_size %u.%01u kb, ", + (s->xfer_sect / 2) / s->xfer_elem, + ASC_TENTHS((s->xfer_sect / 2), s->xfer_elem)); + + seq_printf(m, "avg_xfer_size %u.%01u kb\n", + (s->xfer_sect / 2) / s->xfer_cnt, + ASC_TENTHS((s->xfer_sect / 2), s->xfer_cnt)); + } +} +#endif /* ADVANSYS_STATS */ + +/* + * advansys_show_info() - /proc/scsi/advansys/{0,1,2,3,...} + * + * m: seq_file to print into + * shost: Scsi_Host + * + * Return the number of bytes read from or written to a + * /proc/scsi/advansys/[0...] file. + */ +static int +advansys_show_info(struct seq_file *m, struct Scsi_Host *shost) +{ + struct asc_board *boardp = shost_priv(shost); + + ASC_DBG(1, "begin\n"); + + /* + * User read of /proc/scsi/advansys/[0...] file. + */ + + /* + * Get board configuration information. + * + * advansys_info() returns the board string from its own static buffer. + */ + /* Copy board information. */ + seq_printf(m, "%s\n", (char *)advansys_info(shost)); + /* + * Display Wide Board BIOS Information. + */ + if (!ASC_NARROW_BOARD(boardp)) + asc_prt_adv_bios(m, shost); + + /* + * Display driver information for each device attached to the board. + */ + asc_prt_board_devices(m, shost); + + /* + * Display EEPROM configuration for the board. + */ + if (ASC_NARROW_BOARD(boardp)) + asc_prt_asc_board_eeprom(m, shost); + else + asc_prt_adv_board_eeprom(m, shost); + + /* + * Display driver configuration and information for the board. + */ + asc_prt_driver_conf(m, shost); + +#ifdef ADVANSYS_STATS + /* + * Display driver statistics for the board. + */ + asc_prt_board_stats(m, shost); +#endif /* ADVANSYS_STATS */ + + /* + * Display Asc Library dynamic configuration information + * for the board. + */ + if (ASC_NARROW_BOARD(boardp)) + asc_prt_asc_board_info(m, shost); + else + asc_prt_adv_board_info(m, shost); + return 0; +} +#endif /* CONFIG_PROC_FS */ + +static void asc_scsi_done(struct scsi_cmnd *scp) +{ + scsi_dma_unmap(scp); + ASC_STATS(scp->device->host, done); + scp->scsi_done(scp); +} + +static void AscSetBank(PortAddr iop_base, uchar bank) +{ + uchar val; + + val = AscGetChipControl(iop_base) & + (~ + (CC_SINGLE_STEP | CC_TEST | CC_DIAG | CC_SCSI_RESET | + CC_CHIP_RESET)); + if (bank == 1) { + val |= CC_BANK_ONE; + } else if (bank == 2) { + val |= CC_DIAG | CC_BANK_ONE; + } else { + val &= ~CC_BANK_ONE; + } + AscSetChipControl(iop_base, val); +} + +static void AscSetChipIH(PortAddr iop_base, ushort ins_code) +{ + AscSetBank(iop_base, 1); + AscWriteChipIH(iop_base, ins_code); + AscSetBank(iop_base, 0); +} + +static int AscStartChip(PortAddr iop_base) +{ + AscSetChipControl(iop_base, 0); + if ((AscGetChipStatus(iop_base) & CSW_HALTED) != 0) { + return (0); + } + return (1); +} + +static int AscStopChip(PortAddr iop_base) +{ + uchar cc_val; + + cc_val = + AscGetChipControl(iop_base) & + (~(CC_SINGLE_STEP | CC_TEST | CC_DIAG)); + AscSetChipControl(iop_base, (uchar)(cc_val | CC_HALT)); + AscSetChipIH(iop_base, INS_HALT); + AscSetChipIH(iop_base, INS_RFLAG_WTM); + if ((AscGetChipStatus(iop_base) & CSW_HALTED) == 0) { + return (0); + } + return (1); +} + +static int AscIsChipHalted(PortAddr iop_base) +{ + if ((AscGetChipStatus(iop_base) & CSW_HALTED) != 0) { + if ((AscGetChipControl(iop_base) & CC_HALT) != 0) { + return (1); + } + } + return (0); +} + +static int AscResetChipAndScsiBus(ASC_DVC_VAR *asc_dvc) +{ + PortAddr iop_base; + int i = 10; + + iop_base = asc_dvc->iop_base; + while ((AscGetChipStatus(iop_base) & CSW_SCSI_RESET_ACTIVE) + && (i-- > 0)) { + mdelay(100); + } + AscStopChip(iop_base); + AscSetChipControl(iop_base, CC_CHIP_RESET | CC_SCSI_RESET | CC_HALT); + udelay(60); + AscSetChipIH(iop_base, INS_RFLAG_WTM); + AscSetChipIH(iop_base, INS_HALT); + AscSetChipControl(iop_base, CC_CHIP_RESET | CC_HALT); + AscSetChipControl(iop_base, CC_HALT); + mdelay(200); + AscSetChipStatus(iop_base, CIW_CLR_SCSI_RESET_INT); + AscSetChipStatus(iop_base, 0); + return (AscIsChipHalted(iop_base)); +} + +static int AscFindSignature(PortAddr iop_base) +{ + ushort sig_word; + + ASC_DBG(1, "AscGetChipSignatureByte(0x%x) 0x%x\n", + iop_base, AscGetChipSignatureByte(iop_base)); + if (AscGetChipSignatureByte(iop_base) == (uchar)ASC_1000_ID1B) { + ASC_DBG(1, "AscGetChipSignatureWord(0x%x) 0x%x\n", + iop_base, AscGetChipSignatureWord(iop_base)); + sig_word = AscGetChipSignatureWord(iop_base); + if ((sig_word == (ushort)ASC_1000_ID0W) || + (sig_word == (ushort)ASC_1000_ID0W_FIX)) { + return (1); + } + } + return (0); +} + +static void AscEnableInterrupt(PortAddr iop_base) +{ + ushort cfg; + + cfg = AscGetChipCfgLsw(iop_base); + AscSetChipCfgLsw(iop_base, cfg | ASC_CFG0_HOST_INT_ON); +} + +static void AscDisableInterrupt(PortAddr iop_base) +{ + ushort cfg; + + cfg = AscGetChipCfgLsw(iop_base); + AscSetChipCfgLsw(iop_base, cfg & (~ASC_CFG0_HOST_INT_ON)); +} + +static uchar AscReadLramByte(PortAddr iop_base, ushort addr) +{ + unsigned char byte_data; + unsigned short word_data; + + if (isodd_word(addr)) { + AscSetChipLramAddr(iop_base, addr - 1); + word_data = AscGetChipLramData(iop_base); + byte_data = (word_data >> 8) & 0xFF; + } else { + AscSetChipLramAddr(iop_base, addr); + word_data = AscGetChipLramData(iop_base); + byte_data = word_data & 0xFF; + } + return byte_data; +} + +static ushort AscReadLramWord(PortAddr iop_base, ushort addr) +{ + ushort word_data; + + AscSetChipLramAddr(iop_base, addr); + word_data = AscGetChipLramData(iop_base); + return (word_data); +} + +#if CC_VERY_LONG_SG_LIST +static ASC_DCNT AscReadLramDWord(PortAddr iop_base, ushort addr) +{ + ushort val_low, val_high; + ASC_DCNT dword_data; + + AscSetChipLramAddr(iop_base, addr); + val_low = AscGetChipLramData(iop_base); + val_high = AscGetChipLramData(iop_base); + dword_data = ((ASC_DCNT) val_high << 16) | (ASC_DCNT) val_low; + return (dword_data); +} +#endif /* CC_VERY_LONG_SG_LIST */ + +static void +AscMemWordSetLram(PortAddr iop_base, ushort s_addr, ushort set_wval, int words) +{ + int i; + + AscSetChipLramAddr(iop_base, s_addr); + for (i = 0; i < words; i++) { + AscSetChipLramData(iop_base, set_wval); + } +} + +static void AscWriteLramWord(PortAddr iop_base, ushort addr, ushort word_val) +{ + AscSetChipLramAddr(iop_base, addr); + AscSetChipLramData(iop_base, word_val); +} + +static void AscWriteLramByte(PortAddr iop_base, ushort addr, uchar byte_val) +{ + ushort word_data; + + if (isodd_word(addr)) { + addr--; + word_data = AscReadLramWord(iop_base, addr); + word_data &= 0x00FF; + word_data |= (((ushort)byte_val << 8) & 0xFF00); + } else { + word_data = AscReadLramWord(iop_base, addr); + word_data &= 0xFF00; + word_data |= ((ushort)byte_val & 0x00FF); + } + AscWriteLramWord(iop_base, addr, word_data); +} + +/* + * Copy 2 bytes to LRAM. + * + * The source data is assumed to be in little-endian order in memory + * and is maintained in little-endian order when written to LRAM. + */ +static void +AscMemWordCopyPtrToLram(PortAddr iop_base, ushort s_addr, + const uchar *s_buffer, int words) +{ + int i; + + AscSetChipLramAddr(iop_base, s_addr); + for (i = 0; i < 2 * words; i += 2) { + /* + * On a little-endian system the second argument below + * produces a little-endian ushort which is written to + * LRAM in little-endian order. On a big-endian system + * the second argument produces a big-endian ushort which + * is "transparently" byte-swapped by outpw() and written + * in little-endian order to LRAM. + */ + outpw(iop_base + IOP_RAM_DATA, + ((ushort)s_buffer[i + 1] << 8) | s_buffer[i]); + } +} + +/* + * Copy 4 bytes to LRAM. + * + * The source data is assumed to be in little-endian order in memory + * and is maintained in little-endian order when written to LRAM. + */ +static void +AscMemDWordCopyPtrToLram(PortAddr iop_base, + ushort s_addr, uchar *s_buffer, int dwords) +{ + int i; + + AscSetChipLramAddr(iop_base, s_addr); + for (i = 0; i < 4 * dwords; i += 4) { + outpw(iop_base + IOP_RAM_DATA, ((ushort)s_buffer[i + 1] << 8) | s_buffer[i]); /* LSW */ + outpw(iop_base + IOP_RAM_DATA, ((ushort)s_buffer[i + 3] << 8) | s_buffer[i + 2]); /* MSW */ + } +} + +/* + * Copy 2 bytes from LRAM. + * + * The source data is assumed to be in little-endian order in LRAM + * and is maintained in little-endian order when written to memory. + */ +static void +AscMemWordCopyPtrFromLram(PortAddr iop_base, + ushort s_addr, uchar *d_buffer, int words) +{ + int i; + ushort word; + + AscSetChipLramAddr(iop_base, s_addr); + for (i = 0; i < 2 * words; i += 2) { + word = inpw(iop_base + IOP_RAM_DATA); + d_buffer[i] = word & 0xff; + d_buffer[i + 1] = (word >> 8) & 0xff; + } +} + +static ASC_DCNT AscMemSumLramWord(PortAddr iop_base, ushort s_addr, int words) +{ + ASC_DCNT sum; + int i; + + sum = 0L; + for (i = 0; i < words; i++, s_addr += 2) { + sum += AscReadLramWord(iop_base, s_addr); + } + return (sum); +} + +static ushort AscInitLram(ASC_DVC_VAR *asc_dvc) +{ + uchar i; + ushort s_addr; + PortAddr iop_base; + ushort warn_code; + + iop_base = asc_dvc->iop_base; + warn_code = 0; + AscMemWordSetLram(iop_base, ASC_QADR_BEG, 0, + (ushort)(((int)(asc_dvc->max_total_qng + 2 + 1) * + 64) >> 1)); + i = ASC_MIN_ACTIVE_QNO; + s_addr = ASC_QADR_BEG + ASC_QBLK_SIZE; + AscWriteLramByte(iop_base, (ushort)(s_addr + ASC_SCSIQ_B_FWD), + (uchar)(i + 1)); + AscWriteLramByte(iop_base, (ushort)(s_addr + ASC_SCSIQ_B_BWD), + (uchar)(asc_dvc->max_total_qng)); + AscWriteLramByte(iop_base, (ushort)(s_addr + ASC_SCSIQ_B_QNO), + (uchar)i); + i++; + s_addr += ASC_QBLK_SIZE; + for (; i < asc_dvc->max_total_qng; i++, s_addr += ASC_QBLK_SIZE) { + AscWriteLramByte(iop_base, (ushort)(s_addr + ASC_SCSIQ_B_FWD), + (uchar)(i + 1)); + AscWriteLramByte(iop_base, (ushort)(s_addr + ASC_SCSIQ_B_BWD), + (uchar)(i - 1)); + AscWriteLramByte(iop_base, (ushort)(s_addr + ASC_SCSIQ_B_QNO), + (uchar)i); + } + AscWriteLramByte(iop_base, (ushort)(s_addr + ASC_SCSIQ_B_FWD), + (uchar)ASC_QLINK_END); + AscWriteLramByte(iop_base, (ushort)(s_addr + ASC_SCSIQ_B_BWD), + (uchar)(asc_dvc->max_total_qng - 1)); + AscWriteLramByte(iop_base, (ushort)(s_addr + ASC_SCSIQ_B_QNO), + (uchar)asc_dvc->max_total_qng); + i++; + s_addr += ASC_QBLK_SIZE; + for (; i <= (uchar)(asc_dvc->max_total_qng + 3); + i++, s_addr += ASC_QBLK_SIZE) { + AscWriteLramByte(iop_base, + (ushort)(s_addr + (ushort)ASC_SCSIQ_B_FWD), i); + AscWriteLramByte(iop_base, + (ushort)(s_addr + (ushort)ASC_SCSIQ_B_BWD), i); + AscWriteLramByte(iop_base, + (ushort)(s_addr + (ushort)ASC_SCSIQ_B_QNO), i); + } + return warn_code; +} + +static ASC_DCNT +AscLoadMicroCode(PortAddr iop_base, ushort s_addr, + const uchar *mcode_buf, ushort mcode_size) +{ + ASC_DCNT chksum; + ushort mcode_word_size; + ushort mcode_chksum; + + /* Write the microcode buffer starting at LRAM address 0. */ + mcode_word_size = (ushort)(mcode_size >> 1); + AscMemWordSetLram(iop_base, s_addr, 0, mcode_word_size); + AscMemWordCopyPtrToLram(iop_base, s_addr, mcode_buf, mcode_word_size); + + chksum = AscMemSumLramWord(iop_base, s_addr, mcode_word_size); + ASC_DBG(1, "chksum 0x%lx\n", (ulong)chksum); + mcode_chksum = (ushort)AscMemSumLramWord(iop_base, + (ushort)ASC_CODE_SEC_BEG, + (ushort)((mcode_size - + s_addr - (ushort) + ASC_CODE_SEC_BEG) / + 2)); + ASC_DBG(1, "mcode_chksum 0x%lx\n", (ulong)mcode_chksum); + AscWriteLramWord(iop_base, ASCV_MCODE_CHKSUM_W, mcode_chksum); + AscWriteLramWord(iop_base, ASCV_MCODE_SIZE_W, mcode_size); + return chksum; +} + +static void AscInitQLinkVar(ASC_DVC_VAR *asc_dvc) +{ + PortAddr iop_base; + int i; + ushort lram_addr; + + iop_base = asc_dvc->iop_base; + AscPutRiscVarFreeQHead(iop_base, 1); + AscPutRiscVarDoneQTail(iop_base, asc_dvc->max_total_qng); + AscPutVarFreeQHead(iop_base, 1); + AscPutVarDoneQTail(iop_base, asc_dvc->max_total_qng); + AscWriteLramByte(iop_base, ASCV_BUSY_QHEAD_B, + (uchar)((int)asc_dvc->max_total_qng + 1)); + AscWriteLramByte(iop_base, ASCV_DISC1_QHEAD_B, + (uchar)((int)asc_dvc->max_total_qng + 2)); + AscWriteLramByte(iop_base, (ushort)ASCV_TOTAL_READY_Q_B, + asc_dvc->max_total_qng); + AscWriteLramWord(iop_base, ASCV_ASCDVC_ERR_CODE_W, 0); + AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0); + AscWriteLramByte(iop_base, ASCV_STOP_CODE_B, 0); + AscWriteLramByte(iop_base, ASCV_SCSIBUSY_B, 0); + AscWriteLramByte(iop_base, ASCV_WTM_FLAG_B, 0); + AscPutQDoneInProgress(iop_base, 0); + lram_addr = ASC_QADR_BEG; + for (i = 0; i < 32; i++, lram_addr += 2) { + AscWriteLramWord(iop_base, lram_addr, 0); + } +} + +static ushort AscInitMicroCodeVar(ASC_DVC_VAR *asc_dvc) +{ + int i; + ushort warn_code; + PortAddr iop_base; + ASC_PADDR phy_addr; + ASC_DCNT phy_size; + struct asc_board *board = asc_dvc_to_board(asc_dvc); + + iop_base = asc_dvc->iop_base; + warn_code = 0; + for (i = 0; i <= ASC_MAX_TID; i++) { + AscPutMCodeInitSDTRAtID(iop_base, i, + asc_dvc->cfg->sdtr_period_offset[i]); + } + + AscInitQLinkVar(asc_dvc); + AscWriteLramByte(iop_base, ASCV_DISC_ENABLE_B, + asc_dvc->cfg->disc_enable); + AscWriteLramByte(iop_base, ASCV_HOSTSCSI_ID_B, + ASC_TID_TO_TARGET_ID(asc_dvc->cfg->chip_scsi_id)); + + /* Ensure overrun buffer is aligned on an 8 byte boundary. */ + BUG_ON((unsigned long)asc_dvc->overrun_buf & 7); + asc_dvc->overrun_dma = dma_map_single(board->dev, asc_dvc->overrun_buf, + ASC_OVERRUN_BSIZE, DMA_FROM_DEVICE); + if (dma_mapping_error(board->dev, asc_dvc->overrun_dma)) { + warn_code = -ENOMEM; + goto err_dma_map; + } + phy_addr = cpu_to_le32(asc_dvc->overrun_dma); + AscMemDWordCopyPtrToLram(iop_base, ASCV_OVERRUN_PADDR_D, + (uchar *)&phy_addr, 1); + phy_size = cpu_to_le32(ASC_OVERRUN_BSIZE); + AscMemDWordCopyPtrToLram(iop_base, ASCV_OVERRUN_BSIZE_D, + (uchar *)&phy_size, 1); + + asc_dvc->cfg->mcode_date = + AscReadLramWord(iop_base, (ushort)ASCV_MC_DATE_W); + asc_dvc->cfg->mcode_version = + AscReadLramWord(iop_base, (ushort)ASCV_MC_VER_W); + + AscSetPCAddr(iop_base, ASC_MCODE_START_ADDR); + if (AscGetPCAddr(iop_base) != ASC_MCODE_START_ADDR) { + asc_dvc->err_code |= ASC_IERR_SET_PC_ADDR; + warn_code = UW_ERR; + goto err_mcode_start; + } + if (AscStartChip(iop_base) != 1) { + asc_dvc->err_code |= ASC_IERR_START_STOP_CHIP; + warn_code = UW_ERR; + goto err_mcode_start; + } + + return warn_code; + +err_mcode_start: + dma_unmap_single(board->dev, asc_dvc->overrun_dma, + ASC_OVERRUN_BSIZE, DMA_FROM_DEVICE); +err_dma_map: + asc_dvc->overrun_dma = 0; + return warn_code; +} + +static ushort AscInitAsc1000Driver(ASC_DVC_VAR *asc_dvc) +{ + const struct firmware *fw; + const char fwname[] = "advansys/mcode.bin"; + int err; + unsigned long chksum; + ushort warn_code; + PortAddr iop_base; + + iop_base = asc_dvc->iop_base; + warn_code = 0; + if ((asc_dvc->dvc_cntl & ASC_CNTL_RESET_SCSI) && + !(asc_dvc->init_state & ASC_INIT_RESET_SCSI_DONE)) { + AscResetChipAndScsiBus(asc_dvc); + mdelay(asc_dvc->scsi_reset_wait * 1000); /* XXX: msleep? */ + } + asc_dvc->init_state |= ASC_INIT_STATE_BEG_LOAD_MC; + if (asc_dvc->err_code != 0) + return UW_ERR; + if (!AscFindSignature(asc_dvc->iop_base)) { + asc_dvc->err_code = ASC_IERR_BAD_SIGNATURE; + return warn_code; + } + AscDisableInterrupt(iop_base); + warn_code |= AscInitLram(asc_dvc); + if (asc_dvc->err_code != 0) + return UW_ERR; + + err = request_firmware(&fw, fwname, asc_dvc->drv_ptr->dev); + if (err) { + printk(KERN_ERR "Failed to load image \"%s\" err %d\n", + fwname, err); + asc_dvc->err_code |= ASC_IERR_MCODE_CHKSUM; + return err; + } + if (fw->size < 4) { + printk(KERN_ERR "Bogus length %zu in image \"%s\"\n", + fw->size, fwname); + release_firmware(fw); + asc_dvc->err_code |= ASC_IERR_MCODE_CHKSUM; + return -EINVAL; + } + chksum = (fw->data[3] << 24) | (fw->data[2] << 16) | + (fw->data[1] << 8) | fw->data[0]; + ASC_DBG(1, "_asc_mcode_chksum 0x%lx\n", (ulong)chksum); + if (AscLoadMicroCode(iop_base, 0, &fw->data[4], + fw->size - 4) != chksum) { + asc_dvc->err_code |= ASC_IERR_MCODE_CHKSUM; + release_firmware(fw); + return warn_code; + } + release_firmware(fw); + warn_code |= AscInitMicroCodeVar(asc_dvc); + if (!asc_dvc->overrun_dma) + return warn_code; + asc_dvc->init_state |= ASC_INIT_STATE_END_LOAD_MC; + AscEnableInterrupt(iop_base); + return warn_code; +} + +/* + * Load the Microcode + * + * Write the microcode image to RISC memory starting at address 0. + * + * The microcode is stored compressed in the following format: + * + * 254 word (508 byte) table indexed by byte code followed + * by the following byte codes: + * + * 1-Byte Code: + * 00: Emit word 0 in table. + * 01: Emit word 1 in table. + * . + * FD: Emit word 253 in table. + * + * Multi-Byte Code: + * FE WW WW: (3 byte code) Word to emit is the next word WW WW. + * FF BB WW WW: (4 byte code) Emit BB count times next word WW WW. + * + * Returns 0 or an error if the checksum doesn't match + */ +static int AdvLoadMicrocode(AdvPortAddr iop_base, const unsigned char *buf, + int size, int memsize, int chksum) +{ + int i, j, end, len = 0; + ADV_DCNT sum; + + AdvWriteWordRegister(iop_base, IOPW_RAM_ADDR, 0); + + for (i = 253 * 2; i < size; i++) { + if (buf[i] == 0xff) { + unsigned short word = (buf[i + 3] << 8) | buf[i + 2]; + for (j = 0; j < buf[i + 1]; j++) { + AdvWriteWordAutoIncLram(iop_base, word); + len += 2; + } + i += 3; + } else if (buf[i] == 0xfe) { + unsigned short word = (buf[i + 2] << 8) | buf[i + 1]; + AdvWriteWordAutoIncLram(iop_base, word); + i += 2; + len += 2; + } else { + unsigned int off = buf[i] * 2; + unsigned short word = (buf[off + 1] << 8) | buf[off]; + AdvWriteWordAutoIncLram(iop_base, word); + len += 2; + } + } + + end = len; + + while (len < memsize) { + AdvWriteWordAutoIncLram(iop_base, 0); + len += 2; + } + + /* Verify the microcode checksum. */ + sum = 0; + AdvWriteWordRegister(iop_base, IOPW_RAM_ADDR, 0); + + for (len = 0; len < end; len += 2) { + sum += AdvReadWordAutoIncLram(iop_base); + } + + if (sum != chksum) + return ASC_IERR_MCODE_CHKSUM; + + return 0; +} + +static void AdvBuildCarrierFreelist(struct adv_dvc_var *asc_dvc) +{ + ADV_CARR_T *carrp; + ADV_SDCNT buf_size; + ADV_PADDR carr_paddr; + + carrp = (ADV_CARR_T *) ADV_16BALIGN(asc_dvc->carrier_buf); + asc_dvc->carr_freelist = NULL; + if (carrp == asc_dvc->carrier_buf) { + buf_size = ADV_CARRIER_BUFSIZE; + } else { + buf_size = ADV_CARRIER_BUFSIZE - sizeof(ADV_CARR_T); + } + + do { + /* Get physical address of the carrier 'carrp'. */ + carr_paddr = cpu_to_le32(virt_to_bus(carrp)); + + buf_size -= sizeof(ADV_CARR_T); + + carrp->carr_pa = carr_paddr; + carrp->carr_va = cpu_to_le32(ADV_VADDR_TO_U32(carrp)); + + /* + * Insert the carrier at the beginning of the freelist. + */ + carrp->next_vpa = + cpu_to_le32(ADV_VADDR_TO_U32(asc_dvc->carr_freelist)); + asc_dvc->carr_freelist = carrp; + + carrp++; + } while (buf_size > 0); +} + +/* + * Send an idle command to the chip and wait for completion. + * + * Command completion is polled for once per microsecond. + * + * The function can be called from anywhere including an interrupt handler. + * But the function is not re-entrant, so it uses the DvcEnter/LeaveCritical() + * functions to prevent reentrancy. + * + * Return Values: + * ADV_TRUE - command completed successfully + * ADV_FALSE - command failed + * ADV_ERROR - command timed out + */ +static int +AdvSendIdleCmd(ADV_DVC_VAR *asc_dvc, + ushort idle_cmd, ADV_DCNT idle_cmd_parameter) +{ + int result; + ADV_DCNT i, j; + AdvPortAddr iop_base; + + iop_base = asc_dvc->iop_base; + + /* + * Clear the idle command status which is set by the microcode + * to a non-zero value to indicate when the command is completed. + * The non-zero result is one of the IDLE_CMD_STATUS_* values + */ + AdvWriteWordLram(iop_base, ASC_MC_IDLE_CMD_STATUS, (ushort)0); + + /* + * Write the idle command value after the idle command parameter + * has been written to avoid a race condition. If the order is not + * followed, the microcode may process the idle command before the + * parameters have been written to LRAM. + */ + AdvWriteDWordLramNoSwap(iop_base, ASC_MC_IDLE_CMD_PARAMETER, + cpu_to_le32(idle_cmd_parameter)); + AdvWriteWordLram(iop_base, ASC_MC_IDLE_CMD, idle_cmd); + + /* + * Tickle the RISC to tell it to process the idle command. + */ + AdvWriteByteRegister(iop_base, IOPB_TICKLE, ADV_TICKLE_B); + if (asc_dvc->chip_type == ADV_CHIP_ASC3550) { + /* + * Clear the tickle value. In the ASC-3550 the RISC flag + * command 'clr_tickle_b' does not work unless the host + * value is cleared. + */ + AdvWriteByteRegister(iop_base, IOPB_TICKLE, ADV_TICKLE_NOP); + } + + /* Wait for up to 100 millisecond for the idle command to timeout. */ + for (i = 0; i < SCSI_WAIT_100_MSEC; i++) { + /* Poll once each microsecond for command completion. */ + for (j = 0; j < SCSI_US_PER_MSEC; j++) { + AdvReadWordLram(iop_base, ASC_MC_IDLE_CMD_STATUS, + result); + if (result != 0) + return result; + udelay(1); + } + } + + BUG(); /* The idle command should never timeout. */ + return ADV_ERROR; +} + +/* + * Reset SCSI Bus and purge all outstanding requests. + * + * Return Value: + * ADV_TRUE(1) - All requests are purged and SCSI Bus is reset. + * ADV_FALSE(0) - Microcode command failed. + * ADV_ERROR(-1) - Microcode command timed-out. Microcode or IC + * may be hung which requires driver recovery. + */ +static int AdvResetSB(ADV_DVC_VAR *asc_dvc) +{ + int status; + + /* + * Send the SCSI Bus Reset idle start idle command which asserts + * the SCSI Bus Reset signal. + */ + status = AdvSendIdleCmd(asc_dvc, (ushort)IDLE_CMD_SCSI_RESET_START, 0L); + if (status != ADV_TRUE) { + return status; + } + + /* + * Delay for the specified SCSI Bus Reset hold time. + * + * The hold time delay is done on the host because the RISC has no + * microsecond accurate timer. + */ + udelay(ASC_SCSI_RESET_HOLD_TIME_US); + + /* + * Send the SCSI Bus Reset end idle command which de-asserts + * the SCSI Bus Reset signal and purges any pending requests. + */ + status = AdvSendIdleCmd(asc_dvc, (ushort)IDLE_CMD_SCSI_RESET_END, 0L); + if (status != ADV_TRUE) { + return status; + } + + mdelay(asc_dvc->scsi_reset_wait * 1000); /* XXX: msleep? */ + + return status; +} + +/* + * Initialize the ASC-3550. + * + * On failure set the ADV_DVC_VAR field 'err_code' and return ADV_ERROR. + * + * For a non-fatal error return a warning code. If there are no warnings + * then 0 is returned. + * + * Needed after initialization for error recovery. + */ +static int AdvInitAsc3550Driver(ADV_DVC_VAR *asc_dvc) +{ + const struct firmware *fw; + const char fwname[] = "advansys/3550.bin"; + AdvPortAddr iop_base; + ushort warn_code; + int begin_addr; + int end_addr; + ushort code_sum; + int word; + int i; + int err; + unsigned long chksum; + ushort scsi_cfg1; + uchar tid; + ushort bios_mem[ASC_MC_BIOSLEN / 2]; /* BIOS RISC Memory 0x40-0x8F. */ + ushort wdtr_able = 0, sdtr_able, tagqng_able; + uchar max_cmd[ADV_MAX_TID + 1]; + + /* If there is already an error, don't continue. */ + if (asc_dvc->err_code != 0) + return ADV_ERROR; + + /* + * The caller must set 'chip_type' to ADV_CHIP_ASC3550. + */ + if (asc_dvc->chip_type != ADV_CHIP_ASC3550) { + asc_dvc->err_code = ASC_IERR_BAD_CHIPTYPE; + return ADV_ERROR; + } + + warn_code = 0; + iop_base = asc_dvc->iop_base; + + /* + * Save the RISC memory BIOS region before writing the microcode. + * The BIOS may already be loaded and using its RISC LRAM region + * so its region must be saved and restored. + * + * Note: This code makes the assumption, which is currently true, + * that a chip reset does not clear RISC LRAM. + */ + for (i = 0; i < ASC_MC_BIOSLEN / 2; i++) { + AdvReadWordLram(iop_base, ASC_MC_BIOSMEM + (2 * i), + bios_mem[i]); + } + + /* + * Save current per TID negotiated values. + */ + if (bios_mem[(ASC_MC_BIOS_SIGNATURE - ASC_MC_BIOSMEM) / 2] == 0x55AA) { + ushort bios_version, major, minor; + + bios_version = + bios_mem[(ASC_MC_BIOS_VERSION - ASC_MC_BIOSMEM) / 2]; + major = (bios_version >> 12) & 0xF; + minor = (bios_version >> 8) & 0xF; + if (major < 3 || (major == 3 && minor == 1)) { + /* BIOS 3.1 and earlier location of 'wdtr_able' variable. */ + AdvReadWordLram(iop_base, 0x120, wdtr_able); + } else { + AdvReadWordLram(iop_base, ASC_MC_WDTR_ABLE, wdtr_able); + } + } + AdvReadWordLram(iop_base, ASC_MC_SDTR_ABLE, sdtr_able); + AdvReadWordLram(iop_base, ASC_MC_TAGQNG_ABLE, tagqng_able); + for (tid = 0; tid <= ADV_MAX_TID; tid++) { + AdvReadByteLram(iop_base, ASC_MC_NUMBER_OF_MAX_CMD + tid, + max_cmd[tid]); + } + + err = request_firmware(&fw, fwname, asc_dvc->drv_ptr->dev); + if (err) { + printk(KERN_ERR "Failed to load image \"%s\" err %d\n", + fwname, err); + asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM; + return err; + } + if (fw->size < 4) { + printk(KERN_ERR "Bogus length %zu in image \"%s\"\n", + fw->size, fwname); + release_firmware(fw); + asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM; + return -EINVAL; + } + chksum = (fw->data[3] << 24) | (fw->data[2] << 16) | + (fw->data[1] << 8) | fw->data[0]; + asc_dvc->err_code = AdvLoadMicrocode(iop_base, &fw->data[4], + fw->size - 4, ADV_3550_MEMSIZE, + chksum); + release_firmware(fw); + if (asc_dvc->err_code) + return ADV_ERROR; + + /* + * Restore the RISC memory BIOS region. + */ + for (i = 0; i < ASC_MC_BIOSLEN / 2; i++) { + AdvWriteWordLram(iop_base, ASC_MC_BIOSMEM + (2 * i), + bios_mem[i]); + } + + /* + * Calculate and write the microcode code checksum to the microcode + * code checksum location ASC_MC_CODE_CHK_SUM (0x2C). + */ + AdvReadWordLram(iop_base, ASC_MC_CODE_BEGIN_ADDR, begin_addr); + AdvReadWordLram(iop_base, ASC_MC_CODE_END_ADDR, end_addr); + code_sum = 0; + AdvWriteWordRegister(iop_base, IOPW_RAM_ADDR, begin_addr); + for (word = begin_addr; word < end_addr; word += 2) { + code_sum += AdvReadWordAutoIncLram(iop_base); + } + AdvWriteWordLram(iop_base, ASC_MC_CODE_CHK_SUM, code_sum); + + /* + * Read and save microcode version and date. + */ + AdvReadWordLram(iop_base, ASC_MC_VERSION_DATE, + asc_dvc->cfg->mcode_date); + AdvReadWordLram(iop_base, ASC_MC_VERSION_NUM, + asc_dvc->cfg->mcode_version); + + /* + * Set the chip type to indicate the ASC3550. + */ + AdvWriteWordLram(iop_base, ASC_MC_CHIP_TYPE, ADV_CHIP_ASC3550); + + /* + * If the PCI Configuration Command Register "Parity Error Response + * Control" Bit was clear (0), then set the microcode variable + * 'control_flag' CONTROL_FLAG_IGNORE_PERR flag to tell the microcode + * to ignore DMA parity errors. + */ + if (asc_dvc->cfg->control_flag & CONTROL_FLAG_IGNORE_PERR) { + AdvReadWordLram(iop_base, ASC_MC_CONTROL_FLAG, word); + word |= CONTROL_FLAG_IGNORE_PERR; + AdvWriteWordLram(iop_base, ASC_MC_CONTROL_FLAG, word); + } + + /* + * For ASC-3550, setting the START_CTL_EMFU [3:2] bits sets a FIFO + * threshold of 128 bytes. This register is only accessible to the host. + */ + AdvWriteByteRegister(iop_base, IOPB_DMA_CFG0, + START_CTL_EMFU | READ_CMD_MRM); + + /* + * Microcode operating variables for WDTR, SDTR, and command tag + * queuing will be set in slave_configure() based on what a + * device reports it is capable of in Inquiry byte 7. + * + * If SCSI Bus Resets have been disabled, then directly set + * SDTR and WDTR from the EEPROM configuration. This will allow + * the BIOS and warm boot to work without a SCSI bus hang on + * the Inquiry caused by host and target mismatched DTR values. + * Without the SCSI Bus Reset, before an Inquiry a device can't + * be assumed to be in Asynchronous, Narrow mode. + */ + if ((asc_dvc->bios_ctrl & BIOS_CTRL_RESET_SCSI_BUS) == 0) { + AdvWriteWordLram(iop_base, ASC_MC_WDTR_ABLE, + asc_dvc->wdtr_able); + AdvWriteWordLram(iop_base, ASC_MC_SDTR_ABLE, + asc_dvc->sdtr_able); + } + + /* + * Set microcode operating variables for SDTR_SPEED1, SDTR_SPEED2, + * SDTR_SPEED3, and SDTR_SPEED4 based on the ULTRA EEPROM per TID + * bitmask. These values determine the maximum SDTR speed negotiated + * with a device. + * + * The SDTR per TID bitmask overrides the SDTR_SPEED1, SDTR_SPEED2, + * SDTR_SPEED3, and SDTR_SPEED4 values so it is safe to set them + * without determining here whether the device supports SDTR. + * + * 4-bit speed SDTR speed name + * =========== =============== + * 0000b (0x0) SDTR disabled + * 0001b (0x1) 5 Mhz + * 0010b (0x2) 10 Mhz + * 0011b (0x3) 20 Mhz (Ultra) + * 0100b (0x4) 40 Mhz (LVD/Ultra2) + * 0101b (0x5) 80 Mhz (LVD2/Ultra3) + * 0110b (0x6) Undefined + * . + * 1111b (0xF) Undefined + */ + word = 0; + for (tid = 0; tid <= ADV_MAX_TID; tid++) { + if (ADV_TID_TO_TIDMASK(tid) & asc_dvc->ultra_able) { + /* Set Ultra speed for TID 'tid'. */ + word |= (0x3 << (4 * (tid % 4))); + } else { + /* Set Fast speed for TID 'tid'. */ + word |= (0x2 << (4 * (tid % 4))); + } + if (tid == 3) { /* Check if done with sdtr_speed1. */ + AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED1, word); + word = 0; + } else if (tid == 7) { /* Check if done with sdtr_speed2. */ + AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED2, word); + word = 0; + } else if (tid == 11) { /* Check if done with sdtr_speed3. */ + AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED3, word); + word = 0; + } else if (tid == 15) { /* Check if done with sdtr_speed4. */ + AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED4, word); + /* End of loop. */ + } + } + + /* + * Set microcode operating variable for the disconnect per TID bitmask. + */ + AdvWriteWordLram(iop_base, ASC_MC_DISC_ENABLE, + asc_dvc->cfg->disc_enable); + + /* + * Set SCSI_CFG0 Microcode Default Value. + * + * The microcode will set the SCSI_CFG0 register using this value + * after it is started below. + */ + AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_SCSI_CFG0, + PARITY_EN | QUEUE_128 | SEL_TMO_LONG | OUR_ID_EN | + asc_dvc->chip_scsi_id); + + /* + * Determine SCSI_CFG1 Microcode Default Value. + * + * The microcode will set the SCSI_CFG1 register using this value + * after it is started below. + */ + + /* Read current SCSI_CFG1 Register value. */ + scsi_cfg1 = AdvReadWordRegister(iop_base, IOPW_SCSI_CFG1); + + /* + * If all three connectors are in use, return an error. + */ + if ((scsi_cfg1 & CABLE_ILLEGAL_A) == 0 || + (scsi_cfg1 & CABLE_ILLEGAL_B) == 0) { + asc_dvc->err_code |= ASC_IERR_ILLEGAL_CONNECTION; + return ADV_ERROR; + } + + /* + * If the internal narrow cable is reversed all of the SCSI_CTRL + * register signals will be set. Check for and return an error if + * this condition is found. + */ + if ((AdvReadWordRegister(iop_base, IOPW_SCSI_CTRL) & 0x3F07) == 0x3F07) { + asc_dvc->err_code |= ASC_IERR_REVERSED_CABLE; + return ADV_ERROR; + } + + /* + * If this is a differential board and a single-ended device + * is attached to one of the connectors, return an error. + */ + if ((scsi_cfg1 & DIFF_MODE) && (scsi_cfg1 & DIFF_SENSE) == 0) { + asc_dvc->err_code |= ASC_IERR_SINGLE_END_DEVICE; + return ADV_ERROR; + } + + /* + * If automatic termination control is enabled, then set the + * termination value based on a table listed in a_condor.h. + * + * If manual termination was specified with an EEPROM setting + * then 'termination' was set-up in AdvInitFrom3550EEPROM() and + * is ready to be 'ored' into SCSI_CFG1. + */ + if (asc_dvc->cfg->termination == 0) { + /* + * The software always controls termination by setting TERM_CTL_SEL. + * If TERM_CTL_SEL were set to 0, the hardware would set termination. + */ + asc_dvc->cfg->termination |= TERM_CTL_SEL; + + switch (scsi_cfg1 & CABLE_DETECT) { + /* TERM_CTL_H: on, TERM_CTL_L: on */ + case 0x3: + case 0x7: + case 0xB: + case 0xD: + case 0xE: + case 0xF: + asc_dvc->cfg->termination |= (TERM_CTL_H | TERM_CTL_L); + break; + + /* TERM_CTL_H: on, TERM_CTL_L: off */ + case 0x1: + case 0x5: + case 0x9: + case 0xA: + case 0xC: + asc_dvc->cfg->termination |= TERM_CTL_H; + break; + + /* TERM_CTL_H: off, TERM_CTL_L: off */ + case 0x2: + case 0x6: + break; + } + } + + /* + * Clear any set TERM_CTL_H and TERM_CTL_L bits. + */ + scsi_cfg1 &= ~TERM_CTL; + + /* + * Invert the TERM_CTL_H and TERM_CTL_L bits and then + * set 'scsi_cfg1'. The TERM_POL bit does not need to be + * referenced, because the hardware internally inverts + * the Termination High and Low bits if TERM_POL is set. + */ + scsi_cfg1 |= (TERM_CTL_SEL | (~asc_dvc->cfg->termination & TERM_CTL)); + + /* + * Set SCSI_CFG1 Microcode Default Value + * + * Set filter value and possibly modified termination control + * bits in the Microcode SCSI_CFG1 Register Value. + * + * The microcode will set the SCSI_CFG1 register using this value + * after it is started below. + */ + AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_SCSI_CFG1, + FLTR_DISABLE | scsi_cfg1); + + /* + * Set MEM_CFG Microcode Default Value + * + * The microcode will set the MEM_CFG register using this value + * after it is started below. + * + * MEM_CFG may be accessed as a word or byte, but only bits 0-7 + * are defined. + * + * ASC-3550 has 8KB internal memory. + */ + AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_MEM_CFG, + BIOS_EN | RAM_SZ_8KB); + + /* + * Set SEL_MASK Microcode Default Value + * + * The microcode will set the SEL_MASK register using this value + * after it is started below. + */ + AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_SEL_MASK, + ADV_TID_TO_TIDMASK(asc_dvc->chip_scsi_id)); + + AdvBuildCarrierFreelist(asc_dvc); + + /* + * Set-up the Host->RISC Initiator Command Queue (ICQ). + */ + + if ((asc_dvc->icq_sp = asc_dvc->carr_freelist) == NULL) { + asc_dvc->err_code |= ASC_IERR_NO_CARRIER; + return ADV_ERROR; + } + asc_dvc->carr_freelist = (ADV_CARR_T *) + ADV_U32_TO_VADDR(le32_to_cpu(asc_dvc->icq_sp->next_vpa)); + + /* + * The first command issued will be placed in the stopper carrier. + */ + asc_dvc->icq_sp->next_vpa = cpu_to_le32(ASC_CQ_STOPPER); + + /* + * Set RISC ICQ physical address start value. + */ + AdvWriteDWordLramNoSwap(iop_base, ASC_MC_ICQ, asc_dvc->icq_sp->carr_pa); + + /* + * Set-up the RISC->Host Initiator Response Queue (IRQ). + */ + if ((asc_dvc->irq_sp = asc_dvc->carr_freelist) == NULL) { + asc_dvc->err_code |= ASC_IERR_NO_CARRIER; + return ADV_ERROR; + } + asc_dvc->carr_freelist = (ADV_CARR_T *) + ADV_U32_TO_VADDR(le32_to_cpu(asc_dvc->irq_sp->next_vpa)); + + /* + * The first command completed by the RISC will be placed in + * the stopper. + * + * Note: Set 'next_vpa' to ASC_CQ_STOPPER. When the request is + * completed the RISC will set the ASC_RQ_STOPPER bit. + */ + asc_dvc->irq_sp->next_vpa = cpu_to_le32(ASC_CQ_STOPPER); + + /* + * Set RISC IRQ physical address start value. + */ + AdvWriteDWordLramNoSwap(iop_base, ASC_MC_IRQ, asc_dvc->irq_sp->carr_pa); + asc_dvc->carr_pending_cnt = 0; + + AdvWriteByteRegister(iop_base, IOPB_INTR_ENABLES, + (ADV_INTR_ENABLE_HOST_INTR | + ADV_INTR_ENABLE_GLOBAL_INTR)); + + AdvReadWordLram(iop_base, ASC_MC_CODE_BEGIN_ADDR, word); + AdvWriteWordRegister(iop_base, IOPW_PC, word); + + /* finally, finally, gentlemen, start your engine */ + AdvWriteWordRegister(iop_base, IOPW_RISC_CSR, ADV_RISC_CSR_RUN); + + /* + * Reset the SCSI Bus if the EEPROM indicates that SCSI Bus + * Resets should be performed. The RISC has to be running + * to issue a SCSI Bus Reset. + */ + if (asc_dvc->bios_ctrl & BIOS_CTRL_RESET_SCSI_BUS) { + /* + * If the BIOS Signature is present in memory, restore the + * BIOS Handshake Configuration Table and do not perform + * a SCSI Bus Reset. + */ + if (bios_mem[(ASC_MC_BIOS_SIGNATURE - ASC_MC_BIOSMEM) / 2] == + 0x55AA) { + /* + * Restore per TID negotiated values. + */ + AdvWriteWordLram(iop_base, ASC_MC_WDTR_ABLE, wdtr_able); + AdvWriteWordLram(iop_base, ASC_MC_SDTR_ABLE, sdtr_able); + AdvWriteWordLram(iop_base, ASC_MC_TAGQNG_ABLE, + tagqng_able); + for (tid = 0; tid <= ADV_MAX_TID; tid++) { + AdvWriteByteLram(iop_base, + ASC_MC_NUMBER_OF_MAX_CMD + tid, + max_cmd[tid]); + } + } else { + if (AdvResetSB(asc_dvc) != ADV_TRUE) { + warn_code = ASC_WARN_BUSRESET_ERROR; + } + } + } + + return warn_code; +} + +/* + * Initialize the ASC-38C0800. + * + * On failure set the ADV_DVC_VAR field 'err_code' and return ADV_ERROR. + * + * For a non-fatal error return a warning code. If there are no warnings + * then 0 is returned. + * + * Needed after initialization for error recovery. + */ +static int AdvInitAsc38C0800Driver(ADV_DVC_VAR *asc_dvc) +{ + const struct firmware *fw; + const char fwname[] = "advansys/38C0800.bin"; + AdvPortAddr iop_base; + ushort warn_code; + int begin_addr; + int end_addr; + ushort code_sum; + int word; + int i; + int err; + unsigned long chksum; + ushort scsi_cfg1; + uchar byte; + uchar tid; + ushort bios_mem[ASC_MC_BIOSLEN / 2]; /* BIOS RISC Memory 0x40-0x8F. */ + ushort wdtr_able, sdtr_able, tagqng_able; + uchar max_cmd[ADV_MAX_TID + 1]; + + /* If there is already an error, don't continue. */ + if (asc_dvc->err_code != 0) + return ADV_ERROR; + + /* + * The caller must set 'chip_type' to ADV_CHIP_ASC38C0800. + */ + if (asc_dvc->chip_type != ADV_CHIP_ASC38C0800) { + asc_dvc->err_code = ASC_IERR_BAD_CHIPTYPE; + return ADV_ERROR; + } + + warn_code = 0; + iop_base = asc_dvc->iop_base; + + /* + * Save the RISC memory BIOS region before writing the microcode. + * The BIOS may already be loaded and using its RISC LRAM region + * so its region must be saved and restored. + * + * Note: This code makes the assumption, which is currently true, + * that a chip reset does not clear RISC LRAM. + */ + for (i = 0; i < ASC_MC_BIOSLEN / 2; i++) { + AdvReadWordLram(iop_base, ASC_MC_BIOSMEM + (2 * i), + bios_mem[i]); + } + + /* + * Save current per TID negotiated values. + */ + AdvReadWordLram(iop_base, ASC_MC_WDTR_ABLE, wdtr_able); + AdvReadWordLram(iop_base, ASC_MC_SDTR_ABLE, sdtr_able); + AdvReadWordLram(iop_base, ASC_MC_TAGQNG_ABLE, tagqng_able); + for (tid = 0; tid <= ADV_MAX_TID; tid++) { + AdvReadByteLram(iop_base, ASC_MC_NUMBER_OF_MAX_CMD + tid, + max_cmd[tid]); + } + + /* + * RAM BIST (RAM Built-In Self Test) + * + * Address : I/O base + offset 0x38h register (byte). + * Function: Bit 7-6(RW) : RAM mode + * Normal Mode : 0x00 + * Pre-test Mode : 0x40 + * RAM Test Mode : 0x80 + * Bit 5 : unused + * Bit 4(RO) : Done bit + * Bit 3-0(RO) : Status + * Host Error : 0x08 + * Int_RAM Error : 0x04 + * RISC Error : 0x02 + * SCSI Error : 0x01 + * No Error : 0x00 + * + * Note: RAM BIST code should be put right here, before loading the + * microcode and after saving the RISC memory BIOS region. + */ + + /* + * LRAM Pre-test + * + * Write PRE_TEST_MODE (0x40) to register and wait for 10 milliseconds. + * If Done bit not set or low nibble not PRE_TEST_VALUE (0x05), return + * an error. Reset to NORMAL_MODE (0x00) and do again. If cannot reset + * to NORMAL_MODE, return an error too. + */ + for (i = 0; i < 2; i++) { + AdvWriteByteRegister(iop_base, IOPB_RAM_BIST, PRE_TEST_MODE); + mdelay(10); /* Wait for 10ms before reading back. */ + byte = AdvReadByteRegister(iop_base, IOPB_RAM_BIST); + if ((byte & RAM_TEST_DONE) == 0 + || (byte & 0x0F) != PRE_TEST_VALUE) { + asc_dvc->err_code = ASC_IERR_BIST_PRE_TEST; + return ADV_ERROR; + } + + AdvWriteByteRegister(iop_base, IOPB_RAM_BIST, NORMAL_MODE); + mdelay(10); /* Wait for 10ms before reading back. */ + if (AdvReadByteRegister(iop_base, IOPB_RAM_BIST) + != NORMAL_VALUE) { + asc_dvc->err_code = ASC_IERR_BIST_PRE_TEST; + return ADV_ERROR; + } + } + + /* + * LRAM Test - It takes about 1.5 ms to run through the test. + * + * Write RAM_TEST_MODE (0x80) to register and wait for 10 milliseconds. + * If Done bit not set or Status not 0, save register byte, set the + * err_code, and return an error. + */ + AdvWriteByteRegister(iop_base, IOPB_RAM_BIST, RAM_TEST_MODE); + mdelay(10); /* Wait for 10ms before checking status. */ + + byte = AdvReadByteRegister(iop_base, IOPB_RAM_BIST); + if ((byte & RAM_TEST_DONE) == 0 || (byte & RAM_TEST_STATUS) != 0) { + /* Get here if Done bit not set or Status not 0. */ + asc_dvc->bist_err_code = byte; /* for BIOS display message */ + asc_dvc->err_code = ASC_IERR_BIST_RAM_TEST; + return ADV_ERROR; + } + + /* We need to reset back to normal mode after LRAM test passes. */ + AdvWriteByteRegister(iop_base, IOPB_RAM_BIST, NORMAL_MODE); + + err = request_firmware(&fw, fwname, asc_dvc->drv_ptr->dev); + if (err) { + printk(KERN_ERR "Failed to load image \"%s\" err %d\n", + fwname, err); + asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM; + return err; + } + if (fw->size < 4) { + printk(KERN_ERR "Bogus length %zu in image \"%s\"\n", + fw->size, fwname); + release_firmware(fw); + asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM; + return -EINVAL; + } + chksum = (fw->data[3] << 24) | (fw->data[2] << 16) | + (fw->data[1] << 8) | fw->data[0]; + asc_dvc->err_code = AdvLoadMicrocode(iop_base, &fw->data[4], + fw->size - 4, ADV_38C0800_MEMSIZE, + chksum); + release_firmware(fw); + if (asc_dvc->err_code) + return ADV_ERROR; + + /* + * Restore the RISC memory BIOS region. + */ + for (i = 0; i < ASC_MC_BIOSLEN / 2; i++) { + AdvWriteWordLram(iop_base, ASC_MC_BIOSMEM + (2 * i), + bios_mem[i]); + } + + /* + * Calculate and write the microcode code checksum to the microcode + * code checksum location ASC_MC_CODE_CHK_SUM (0x2C). + */ + AdvReadWordLram(iop_base, ASC_MC_CODE_BEGIN_ADDR, begin_addr); + AdvReadWordLram(iop_base, ASC_MC_CODE_END_ADDR, end_addr); + code_sum = 0; + AdvWriteWordRegister(iop_base, IOPW_RAM_ADDR, begin_addr); + for (word = begin_addr; word < end_addr; word += 2) { + code_sum += AdvReadWordAutoIncLram(iop_base); + } + AdvWriteWordLram(iop_base, ASC_MC_CODE_CHK_SUM, code_sum); + + /* + * Read microcode version and date. + */ + AdvReadWordLram(iop_base, ASC_MC_VERSION_DATE, + asc_dvc->cfg->mcode_date); + AdvReadWordLram(iop_base, ASC_MC_VERSION_NUM, + asc_dvc->cfg->mcode_version); + + /* + * Set the chip type to indicate the ASC38C0800. + */ + AdvWriteWordLram(iop_base, ASC_MC_CHIP_TYPE, ADV_CHIP_ASC38C0800); + + /* + * Write 1 to bit 14 'DIS_TERM_DRV' in the SCSI_CFG1 register. + * When DIS_TERM_DRV set to 1, C_DET[3:0] will reflect current + * cable detection and then we are able to read C_DET[3:0]. + * + * Note: We will reset DIS_TERM_DRV to 0 in the 'Set SCSI_CFG1 + * Microcode Default Value' section below. + */ + scsi_cfg1 = AdvReadWordRegister(iop_base, IOPW_SCSI_CFG1); + AdvWriteWordRegister(iop_base, IOPW_SCSI_CFG1, + scsi_cfg1 | DIS_TERM_DRV); + + /* + * If the PCI Configuration Command Register "Parity Error Response + * Control" Bit was clear (0), then set the microcode variable + * 'control_flag' CONTROL_FLAG_IGNORE_PERR flag to tell the microcode + * to ignore DMA parity errors. + */ + if (asc_dvc->cfg->control_flag & CONTROL_FLAG_IGNORE_PERR) { + AdvReadWordLram(iop_base, ASC_MC_CONTROL_FLAG, word); + word |= CONTROL_FLAG_IGNORE_PERR; + AdvWriteWordLram(iop_base, ASC_MC_CONTROL_FLAG, word); + } + + /* + * For ASC-38C0800, set FIFO_THRESH_80B [6:4] bits and START_CTL_TH [3:2] + * bits for the default FIFO threshold. + * + * Note: ASC-38C0800 FIFO threshold has been changed to 256 bytes. + * + * For DMA Errata #4 set the BC_THRESH_ENB bit. + */ + AdvWriteByteRegister(iop_base, IOPB_DMA_CFG0, + BC_THRESH_ENB | FIFO_THRESH_80B | START_CTL_TH | + READ_CMD_MRM); + + /* + * Microcode operating variables for WDTR, SDTR, and command tag + * queuing will be set in slave_configure() based on what a + * device reports it is capable of in Inquiry byte 7. + * + * If SCSI Bus Resets have been disabled, then directly set + * SDTR and WDTR from the EEPROM configuration. This will allow + * the BIOS and warm boot to work without a SCSI bus hang on + * the Inquiry caused by host and target mismatched DTR values. + * Without the SCSI Bus Reset, before an Inquiry a device can't + * be assumed to be in Asynchronous, Narrow mode. + */ + if ((asc_dvc->bios_ctrl & BIOS_CTRL_RESET_SCSI_BUS) == 0) { + AdvWriteWordLram(iop_base, ASC_MC_WDTR_ABLE, + asc_dvc->wdtr_able); + AdvWriteWordLram(iop_base, ASC_MC_SDTR_ABLE, + asc_dvc->sdtr_able); + } + + /* + * Set microcode operating variables for DISC and SDTR_SPEED1, + * SDTR_SPEED2, SDTR_SPEED3, and SDTR_SPEED4 based on the EEPROM + * configuration values. + * + * The SDTR per TID bitmask overrides the SDTR_SPEED1, SDTR_SPEED2, + * SDTR_SPEED3, and SDTR_SPEED4 values so it is safe to set them + * without determining here whether the device supports SDTR. + */ + AdvWriteWordLram(iop_base, ASC_MC_DISC_ENABLE, + asc_dvc->cfg->disc_enable); + AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED1, asc_dvc->sdtr_speed1); + AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED2, asc_dvc->sdtr_speed2); + AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED3, asc_dvc->sdtr_speed3); + AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED4, asc_dvc->sdtr_speed4); + + /* + * Set SCSI_CFG0 Microcode Default Value. + * + * The microcode will set the SCSI_CFG0 register using this value + * after it is started below. + */ + AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_SCSI_CFG0, + PARITY_EN | QUEUE_128 | SEL_TMO_LONG | OUR_ID_EN | + asc_dvc->chip_scsi_id); + + /* + * Determine SCSI_CFG1 Microcode Default Value. + * + * The microcode will set the SCSI_CFG1 register using this value + * after it is started below. + */ + + /* Read current SCSI_CFG1 Register value. */ + scsi_cfg1 = AdvReadWordRegister(iop_base, IOPW_SCSI_CFG1); + + /* + * If the internal narrow cable is reversed all of the SCSI_CTRL + * register signals will be set. Check for and return an error if + * this condition is found. + */ + if ((AdvReadWordRegister(iop_base, IOPW_SCSI_CTRL) & 0x3F07) == 0x3F07) { + asc_dvc->err_code |= ASC_IERR_REVERSED_CABLE; + return ADV_ERROR; + } + + /* + * All kind of combinations of devices attached to one of four + * connectors are acceptable except HVD device attached. For example, + * LVD device can be attached to SE connector while SE device attached + * to LVD connector. If LVD device attached to SE connector, it only + * runs up to Ultra speed. + * + * If an HVD device is attached to one of LVD connectors, return an + * error. However, there is no way to detect HVD device attached to + * SE connectors. + */ + if (scsi_cfg1 & HVD) { + asc_dvc->err_code = ASC_IERR_HVD_DEVICE; + return ADV_ERROR; + } + + /* + * If either SE or LVD automatic termination control is enabled, then + * set the termination value based on a table listed in a_condor.h. + * + * If manual termination was specified with an EEPROM setting then + * 'termination' was set-up in AdvInitFrom38C0800EEPROM() and is ready + * to be 'ored' into SCSI_CFG1. + */ + if ((asc_dvc->cfg->termination & TERM_SE) == 0) { + /* SE automatic termination control is enabled. */ + switch (scsi_cfg1 & C_DET_SE) { + /* TERM_SE_HI: on, TERM_SE_LO: on */ + case 0x1: + case 0x2: + case 0x3: + asc_dvc->cfg->termination |= TERM_SE; + break; + + /* TERM_SE_HI: on, TERM_SE_LO: off */ + case 0x0: + asc_dvc->cfg->termination |= TERM_SE_HI; + break; + } + } + + if ((asc_dvc->cfg->termination & TERM_LVD) == 0) { + /* LVD automatic termination control is enabled. */ + switch (scsi_cfg1 & C_DET_LVD) { + /* TERM_LVD_HI: on, TERM_LVD_LO: on */ + case 0x4: + case 0x8: + case 0xC: + asc_dvc->cfg->termination |= TERM_LVD; + break; + + /* TERM_LVD_HI: off, TERM_LVD_LO: off */ + case 0x0: + break; + } + } + + /* + * Clear any set TERM_SE and TERM_LVD bits. + */ + scsi_cfg1 &= (~TERM_SE & ~TERM_LVD); + + /* + * Invert the TERM_SE and TERM_LVD bits and then set 'scsi_cfg1'. + */ + scsi_cfg1 |= (~asc_dvc->cfg->termination & 0xF0); + + /* + * Clear BIG_ENDIAN, DIS_TERM_DRV, Terminator Polarity and HVD/LVD/SE + * bits and set possibly modified termination control bits in the + * Microcode SCSI_CFG1 Register Value. + */ + scsi_cfg1 &= (~BIG_ENDIAN & ~DIS_TERM_DRV & ~TERM_POL & ~HVD_LVD_SE); + + /* + * Set SCSI_CFG1 Microcode Default Value + * + * Set possibly modified termination control and reset DIS_TERM_DRV + * bits in the Microcode SCSI_CFG1 Register Value. + * + * The microcode will set the SCSI_CFG1 register using this value + * after it is started below. + */ + AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_SCSI_CFG1, scsi_cfg1); + + /* + * Set MEM_CFG Microcode Default Value + * + * The microcode will set the MEM_CFG register using this value + * after it is started below. + * + * MEM_CFG may be accessed as a word or byte, but only bits 0-7 + * are defined. + * + * ASC-38C0800 has 16KB internal memory. + */ + AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_MEM_CFG, + BIOS_EN | RAM_SZ_16KB); + + /* + * Set SEL_MASK Microcode Default Value + * + * The microcode will set the SEL_MASK register using this value + * after it is started below. + */ + AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_SEL_MASK, + ADV_TID_TO_TIDMASK(asc_dvc->chip_scsi_id)); + + AdvBuildCarrierFreelist(asc_dvc); + + /* + * Set-up the Host->RISC Initiator Command Queue (ICQ). + */ + + if ((asc_dvc->icq_sp = asc_dvc->carr_freelist) == NULL) { + asc_dvc->err_code |= ASC_IERR_NO_CARRIER; + return ADV_ERROR; + } + asc_dvc->carr_freelist = (ADV_CARR_T *) + ADV_U32_TO_VADDR(le32_to_cpu(asc_dvc->icq_sp->next_vpa)); + + /* + * The first command issued will be placed in the stopper carrier. + */ + asc_dvc->icq_sp->next_vpa = cpu_to_le32(ASC_CQ_STOPPER); + + /* + * Set RISC ICQ physical address start value. + * carr_pa is LE, must be native before write + */ + AdvWriteDWordLramNoSwap(iop_base, ASC_MC_ICQ, asc_dvc->icq_sp->carr_pa); + + /* + * Set-up the RISC->Host Initiator Response Queue (IRQ). + */ + if ((asc_dvc->irq_sp = asc_dvc->carr_freelist) == NULL) { + asc_dvc->err_code |= ASC_IERR_NO_CARRIER; + return ADV_ERROR; + } + asc_dvc->carr_freelist = (ADV_CARR_T *) + ADV_U32_TO_VADDR(le32_to_cpu(asc_dvc->irq_sp->next_vpa)); + + /* + * The first command completed by the RISC will be placed in + * the stopper. + * + * Note: Set 'next_vpa' to ASC_CQ_STOPPER. When the request is + * completed the RISC will set the ASC_RQ_STOPPER bit. + */ + asc_dvc->irq_sp->next_vpa = cpu_to_le32(ASC_CQ_STOPPER); + + /* + * Set RISC IRQ physical address start value. + * + * carr_pa is LE, must be native before write * + */ + AdvWriteDWordLramNoSwap(iop_base, ASC_MC_IRQ, asc_dvc->irq_sp->carr_pa); + asc_dvc->carr_pending_cnt = 0; + + AdvWriteByteRegister(iop_base, IOPB_INTR_ENABLES, + (ADV_INTR_ENABLE_HOST_INTR | + ADV_INTR_ENABLE_GLOBAL_INTR)); + + AdvReadWordLram(iop_base, ASC_MC_CODE_BEGIN_ADDR, word); + AdvWriteWordRegister(iop_base, IOPW_PC, word); + + /* finally, finally, gentlemen, start your engine */ + AdvWriteWordRegister(iop_base, IOPW_RISC_CSR, ADV_RISC_CSR_RUN); + + /* + * Reset the SCSI Bus if the EEPROM indicates that SCSI Bus + * Resets should be performed. The RISC has to be running + * to issue a SCSI Bus Reset. + */ + if (asc_dvc->bios_ctrl & BIOS_CTRL_RESET_SCSI_BUS) { + /* + * If the BIOS Signature is present in memory, restore the + * BIOS Handshake Configuration Table and do not perform + * a SCSI Bus Reset. + */ + if (bios_mem[(ASC_MC_BIOS_SIGNATURE - ASC_MC_BIOSMEM) / 2] == + 0x55AA) { + /* + * Restore per TID negotiated values. + */ + AdvWriteWordLram(iop_base, ASC_MC_WDTR_ABLE, wdtr_able); + AdvWriteWordLram(iop_base, ASC_MC_SDTR_ABLE, sdtr_able); + AdvWriteWordLram(iop_base, ASC_MC_TAGQNG_ABLE, + tagqng_able); + for (tid = 0; tid <= ADV_MAX_TID; tid++) { + AdvWriteByteLram(iop_base, + ASC_MC_NUMBER_OF_MAX_CMD + tid, + max_cmd[tid]); + } + } else { + if (AdvResetSB(asc_dvc) != ADV_TRUE) { + warn_code = ASC_WARN_BUSRESET_ERROR; + } + } + } + + return warn_code; +} + +/* + * Initialize the ASC-38C1600. + * + * On failure set the ASC_DVC_VAR field 'err_code' and return ADV_ERROR. + * + * For a non-fatal error return a warning code. If there are no warnings + * then 0 is returned. + * + * Needed after initialization for error recovery. + */ +static int AdvInitAsc38C1600Driver(ADV_DVC_VAR *asc_dvc) +{ + const struct firmware *fw; + const char fwname[] = "advansys/38C1600.bin"; + AdvPortAddr iop_base; + ushort warn_code; + int begin_addr; + int end_addr; + ushort code_sum; + long word; + int i; + int err; + unsigned long chksum; + ushort scsi_cfg1; + uchar byte; + uchar tid; + ushort bios_mem[ASC_MC_BIOSLEN / 2]; /* BIOS RISC Memory 0x40-0x8F. */ + ushort wdtr_able, sdtr_able, ppr_able, tagqng_able; + uchar max_cmd[ASC_MAX_TID + 1]; + + /* If there is already an error, don't continue. */ + if (asc_dvc->err_code != 0) { + return ADV_ERROR; + } + + /* + * The caller must set 'chip_type' to ADV_CHIP_ASC38C1600. + */ + if (asc_dvc->chip_type != ADV_CHIP_ASC38C1600) { + asc_dvc->err_code = ASC_IERR_BAD_CHIPTYPE; + return ADV_ERROR; + } + + warn_code = 0; + iop_base = asc_dvc->iop_base; + + /* + * Save the RISC memory BIOS region before writing the microcode. + * The BIOS may already be loaded and using its RISC LRAM region + * so its region must be saved and restored. + * + * Note: This code makes the assumption, which is currently true, + * that a chip reset does not clear RISC LRAM. + */ + for (i = 0; i < ASC_MC_BIOSLEN / 2; i++) { + AdvReadWordLram(iop_base, ASC_MC_BIOSMEM + (2 * i), + bios_mem[i]); + } + + /* + * Save current per TID negotiated values. + */ + AdvReadWordLram(iop_base, ASC_MC_WDTR_ABLE, wdtr_able); + AdvReadWordLram(iop_base, ASC_MC_SDTR_ABLE, sdtr_able); + AdvReadWordLram(iop_base, ASC_MC_PPR_ABLE, ppr_able); + AdvReadWordLram(iop_base, ASC_MC_TAGQNG_ABLE, tagqng_able); + for (tid = 0; tid <= ASC_MAX_TID; tid++) { + AdvReadByteLram(iop_base, ASC_MC_NUMBER_OF_MAX_CMD + tid, + max_cmd[tid]); + } + + /* + * RAM BIST (Built-In Self Test) + * + * Address : I/O base + offset 0x38h register (byte). + * Function: Bit 7-6(RW) : RAM mode + * Normal Mode : 0x00 + * Pre-test Mode : 0x40 + * RAM Test Mode : 0x80 + * Bit 5 : unused + * Bit 4(RO) : Done bit + * Bit 3-0(RO) : Status + * Host Error : 0x08 + * Int_RAM Error : 0x04 + * RISC Error : 0x02 + * SCSI Error : 0x01 + * No Error : 0x00 + * + * Note: RAM BIST code should be put right here, before loading the + * microcode and after saving the RISC memory BIOS region. + */ + + /* + * LRAM Pre-test + * + * Write PRE_TEST_MODE (0x40) to register and wait for 10 milliseconds. + * If Done bit not set or low nibble not PRE_TEST_VALUE (0x05), return + * an error. Reset to NORMAL_MODE (0x00) and do again. If cannot reset + * to NORMAL_MODE, return an error too. + */ + for (i = 0; i < 2; i++) { + AdvWriteByteRegister(iop_base, IOPB_RAM_BIST, PRE_TEST_MODE); + mdelay(10); /* Wait for 10ms before reading back. */ + byte = AdvReadByteRegister(iop_base, IOPB_RAM_BIST); + if ((byte & RAM_TEST_DONE) == 0 + || (byte & 0x0F) != PRE_TEST_VALUE) { + asc_dvc->err_code = ASC_IERR_BIST_PRE_TEST; + return ADV_ERROR; + } + + AdvWriteByteRegister(iop_base, IOPB_RAM_BIST, NORMAL_MODE); + mdelay(10); /* Wait for 10ms before reading back. */ + if (AdvReadByteRegister(iop_base, IOPB_RAM_BIST) + != NORMAL_VALUE) { + asc_dvc->err_code = ASC_IERR_BIST_PRE_TEST; + return ADV_ERROR; + } + } + + /* + * LRAM Test - It takes about 1.5 ms to run through the test. + * + * Write RAM_TEST_MODE (0x80) to register and wait for 10 milliseconds. + * If Done bit not set or Status not 0, save register byte, set the + * err_code, and return an error. + */ + AdvWriteByteRegister(iop_base, IOPB_RAM_BIST, RAM_TEST_MODE); + mdelay(10); /* Wait for 10ms before checking status. */ + + byte = AdvReadByteRegister(iop_base, IOPB_RAM_BIST); + if ((byte & RAM_TEST_DONE) == 0 || (byte & RAM_TEST_STATUS) != 0) { + /* Get here if Done bit not set or Status not 0. */ + asc_dvc->bist_err_code = byte; /* for BIOS display message */ + asc_dvc->err_code = ASC_IERR_BIST_RAM_TEST; + return ADV_ERROR; + } + + /* We need to reset back to normal mode after LRAM test passes. */ + AdvWriteByteRegister(iop_base, IOPB_RAM_BIST, NORMAL_MODE); + + err = request_firmware(&fw, fwname, asc_dvc->drv_ptr->dev); + if (err) { + printk(KERN_ERR "Failed to load image \"%s\" err %d\n", + fwname, err); + asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM; + return err; + } + if (fw->size < 4) { + printk(KERN_ERR "Bogus length %zu in image \"%s\"\n", + fw->size, fwname); + release_firmware(fw); + asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM; + return -EINVAL; + } + chksum = (fw->data[3] << 24) | (fw->data[2] << 16) | + (fw->data[1] << 8) | fw->data[0]; + asc_dvc->err_code = AdvLoadMicrocode(iop_base, &fw->data[4], + fw->size - 4, ADV_38C1600_MEMSIZE, + chksum); + release_firmware(fw); + if (asc_dvc->err_code) + return ADV_ERROR; + + /* + * Restore the RISC memory BIOS region. + */ + for (i = 0; i < ASC_MC_BIOSLEN / 2; i++) { + AdvWriteWordLram(iop_base, ASC_MC_BIOSMEM + (2 * i), + bios_mem[i]); + } + + /* + * Calculate and write the microcode code checksum to the microcode + * code checksum location ASC_MC_CODE_CHK_SUM (0x2C). + */ + AdvReadWordLram(iop_base, ASC_MC_CODE_BEGIN_ADDR, begin_addr); + AdvReadWordLram(iop_base, ASC_MC_CODE_END_ADDR, end_addr); + code_sum = 0; + AdvWriteWordRegister(iop_base, IOPW_RAM_ADDR, begin_addr); + for (word = begin_addr; word < end_addr; word += 2) { + code_sum += AdvReadWordAutoIncLram(iop_base); + } + AdvWriteWordLram(iop_base, ASC_MC_CODE_CHK_SUM, code_sum); + + /* + * Read microcode version and date. + */ + AdvReadWordLram(iop_base, ASC_MC_VERSION_DATE, + asc_dvc->cfg->mcode_date); + AdvReadWordLram(iop_base, ASC_MC_VERSION_NUM, + asc_dvc->cfg->mcode_version); + + /* + * Set the chip type to indicate the ASC38C1600. + */ + AdvWriteWordLram(iop_base, ASC_MC_CHIP_TYPE, ADV_CHIP_ASC38C1600); + + /* + * Write 1 to bit 14 'DIS_TERM_DRV' in the SCSI_CFG1 register. + * When DIS_TERM_DRV set to 1, C_DET[3:0] will reflect current + * cable detection and then we are able to read C_DET[3:0]. + * + * Note: We will reset DIS_TERM_DRV to 0 in the 'Set SCSI_CFG1 + * Microcode Default Value' section below. + */ + scsi_cfg1 = AdvReadWordRegister(iop_base, IOPW_SCSI_CFG1); + AdvWriteWordRegister(iop_base, IOPW_SCSI_CFG1, + scsi_cfg1 | DIS_TERM_DRV); + + /* + * If the PCI Configuration Command Register "Parity Error Response + * Control" Bit was clear (0), then set the microcode variable + * 'control_flag' CONTROL_FLAG_IGNORE_PERR flag to tell the microcode + * to ignore DMA parity errors. + */ + if (asc_dvc->cfg->control_flag & CONTROL_FLAG_IGNORE_PERR) { + AdvReadWordLram(iop_base, ASC_MC_CONTROL_FLAG, word); + word |= CONTROL_FLAG_IGNORE_PERR; + AdvWriteWordLram(iop_base, ASC_MC_CONTROL_FLAG, word); + } + + /* + * If the BIOS control flag AIPP (Asynchronous Information + * Phase Protection) disable bit is not set, then set the firmware + * 'control_flag' CONTROL_FLAG_ENABLE_AIPP bit to enable + * AIPP checking and encoding. + */ + if ((asc_dvc->bios_ctrl & BIOS_CTRL_AIPP_DIS) == 0) { + AdvReadWordLram(iop_base, ASC_MC_CONTROL_FLAG, word); + word |= CONTROL_FLAG_ENABLE_AIPP; + AdvWriteWordLram(iop_base, ASC_MC_CONTROL_FLAG, word); + } + + /* + * For ASC-38C1600 use DMA_CFG0 default values: FIFO_THRESH_80B [6:4], + * and START_CTL_TH [3:2]. + */ + AdvWriteByteRegister(iop_base, IOPB_DMA_CFG0, + FIFO_THRESH_80B | START_CTL_TH | READ_CMD_MRM); + + /* + * Microcode operating variables for WDTR, SDTR, and command tag + * queuing will be set in slave_configure() based on what a + * device reports it is capable of in Inquiry byte 7. + * + * If SCSI Bus Resets have been disabled, then directly set + * SDTR and WDTR from the EEPROM configuration. This will allow + * the BIOS and warm boot to work without a SCSI bus hang on + * the Inquiry caused by host and target mismatched DTR values. + * Without the SCSI Bus Reset, before an Inquiry a device can't + * be assumed to be in Asynchronous, Narrow mode. + */ + if ((asc_dvc->bios_ctrl & BIOS_CTRL_RESET_SCSI_BUS) == 0) { + AdvWriteWordLram(iop_base, ASC_MC_WDTR_ABLE, + asc_dvc->wdtr_able); + AdvWriteWordLram(iop_base, ASC_MC_SDTR_ABLE, + asc_dvc->sdtr_able); + } + + /* + * Set microcode operating variables for DISC and SDTR_SPEED1, + * SDTR_SPEED2, SDTR_SPEED3, and SDTR_SPEED4 based on the EEPROM + * configuration values. + * + * The SDTR per TID bitmask overrides the SDTR_SPEED1, SDTR_SPEED2, + * SDTR_SPEED3, and SDTR_SPEED4 values so it is safe to set them + * without determining here whether the device supports SDTR. + */ + AdvWriteWordLram(iop_base, ASC_MC_DISC_ENABLE, + asc_dvc->cfg->disc_enable); + AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED1, asc_dvc->sdtr_speed1); + AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED2, asc_dvc->sdtr_speed2); + AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED3, asc_dvc->sdtr_speed3); + AdvWriteWordLram(iop_base, ASC_MC_SDTR_SPEED4, asc_dvc->sdtr_speed4); + + /* + * Set SCSI_CFG0 Microcode Default Value. + * + * The microcode will set the SCSI_CFG0 register using this value + * after it is started below. + */ + AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_SCSI_CFG0, + PARITY_EN | QUEUE_128 | SEL_TMO_LONG | OUR_ID_EN | + asc_dvc->chip_scsi_id); + + /* + * Calculate SCSI_CFG1 Microcode Default Value. + * + * The microcode will set the SCSI_CFG1 register using this value + * after it is started below. + * + * Each ASC-38C1600 function has only two cable detect bits. + * The bus mode override bits are in IOPB_SOFT_OVER_WR. + */ + scsi_cfg1 = AdvReadWordRegister(iop_base, IOPW_SCSI_CFG1); + + /* + * If the cable is reversed all of the SCSI_CTRL register signals + * will be set. Check for and return an error if this condition is + * found. + */ + if ((AdvReadWordRegister(iop_base, IOPW_SCSI_CTRL) & 0x3F07) == 0x3F07) { + asc_dvc->err_code |= ASC_IERR_REVERSED_CABLE; + return ADV_ERROR; + } + + /* + * Each ASC-38C1600 function has two connectors. Only an HVD device + * can not be connected to either connector. An LVD device or SE device + * may be connected to either connecor. If an SE device is connected, + * then at most Ultra speed (20 Mhz) can be used on both connectors. + * + * If an HVD device is attached, return an error. + */ + if (scsi_cfg1 & HVD) { + asc_dvc->err_code |= ASC_IERR_HVD_DEVICE; + return ADV_ERROR; + } + + /* + * Each function in the ASC-38C1600 uses only the SE cable detect and + * termination because there are two connectors for each function. Each + * function may use either LVD or SE mode. Corresponding the SE automatic + * termination control EEPROM bits are used for each function. Each + * function has its own EEPROM. If SE automatic control is enabled for + * the function, then set the termination value based on a table listed + * in a_condor.h. + * + * If manual termination is specified in the EEPROM for the function, + * then 'termination' was set-up in AscInitFrom38C1600EEPROM() and is + * ready to be 'ored' into SCSI_CFG1. + */ + if ((asc_dvc->cfg->termination & TERM_SE) == 0) { + struct pci_dev *pdev = adv_dvc_to_pdev(asc_dvc); + /* SE automatic termination control is enabled. */ + switch (scsi_cfg1 & C_DET_SE) { + /* TERM_SE_HI: on, TERM_SE_LO: on */ + case 0x1: + case 0x2: + case 0x3: + asc_dvc->cfg->termination |= TERM_SE; + break; + + case 0x0: + if (PCI_FUNC(pdev->devfn) == 0) { + /* Function 0 - TERM_SE_HI: off, TERM_SE_LO: off */ + } else { + /* Function 1 - TERM_SE_HI: on, TERM_SE_LO: off */ + asc_dvc->cfg->termination |= TERM_SE_HI; + } + break; + } + } + + /* + * Clear any set TERM_SE bits. + */ + scsi_cfg1 &= ~TERM_SE; + + /* + * Invert the TERM_SE bits and then set 'scsi_cfg1'. + */ + scsi_cfg1 |= (~asc_dvc->cfg->termination & TERM_SE); + + /* + * Clear Big Endian and Terminator Polarity bits and set possibly + * modified termination control bits in the Microcode SCSI_CFG1 + * Register Value. + * + * Big Endian bit is not used even on big endian machines. + */ + scsi_cfg1 &= (~BIG_ENDIAN & ~DIS_TERM_DRV & ~TERM_POL); + + /* + * Set SCSI_CFG1 Microcode Default Value + * + * Set possibly modified termination control bits in the Microcode + * SCSI_CFG1 Register Value. + * + * The microcode will set the SCSI_CFG1 register using this value + * after it is started below. + */ + AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_SCSI_CFG1, scsi_cfg1); + + /* + * Set MEM_CFG Microcode Default Value + * + * The microcode will set the MEM_CFG register using this value + * after it is started below. + * + * MEM_CFG may be accessed as a word or byte, but only bits 0-7 + * are defined. + * + * ASC-38C1600 has 32KB internal memory. + * + * XXX - Since ASC38C1600 Rev.3 has a Local RAM failure issue, we come + * out a special 16K Adv Library and Microcode version. After the issue + * resolved, we should turn back to the 32K support. Both a_condor.h and + * mcode.sas files also need to be updated. + * + * AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_MEM_CFG, + * BIOS_EN | RAM_SZ_32KB); + */ + AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_MEM_CFG, + BIOS_EN | RAM_SZ_16KB); + + /* + * Set SEL_MASK Microcode Default Value + * + * The microcode will set the SEL_MASK register using this value + * after it is started below. + */ + AdvWriteWordLram(iop_base, ASC_MC_DEFAULT_SEL_MASK, + ADV_TID_TO_TIDMASK(asc_dvc->chip_scsi_id)); + + AdvBuildCarrierFreelist(asc_dvc); + + /* + * Set-up the Host->RISC Initiator Command Queue (ICQ). + */ + if ((asc_dvc->icq_sp = asc_dvc->carr_freelist) == NULL) { + asc_dvc->err_code |= ASC_IERR_NO_CARRIER; + return ADV_ERROR; + } + asc_dvc->carr_freelist = (ADV_CARR_T *) + ADV_U32_TO_VADDR(le32_to_cpu(asc_dvc->icq_sp->next_vpa)); + + /* + * The first command issued will be placed in the stopper carrier. + */ + asc_dvc->icq_sp->next_vpa = cpu_to_le32(ASC_CQ_STOPPER); + + /* + * Set RISC ICQ physical address start value. Initialize the + * COMMA register to the same value otherwise the RISC will + * prematurely detect a command is available. + */ + AdvWriteDWordLramNoSwap(iop_base, ASC_MC_ICQ, asc_dvc->icq_sp->carr_pa); + AdvWriteDWordRegister(iop_base, IOPDW_COMMA, + le32_to_cpu(asc_dvc->icq_sp->carr_pa)); + + /* + * Set-up the RISC->Host Initiator Response Queue (IRQ). + */ + if ((asc_dvc->irq_sp = asc_dvc->carr_freelist) == NULL) { + asc_dvc->err_code |= ASC_IERR_NO_CARRIER; + return ADV_ERROR; + } + asc_dvc->carr_freelist = (ADV_CARR_T *) + ADV_U32_TO_VADDR(le32_to_cpu(asc_dvc->irq_sp->next_vpa)); + + /* + * The first command completed by the RISC will be placed in + * the stopper. + * + * Note: Set 'next_vpa' to ASC_CQ_STOPPER. When the request is + * completed the RISC will set the ASC_RQ_STOPPER bit. + */ + asc_dvc->irq_sp->next_vpa = cpu_to_le32(ASC_CQ_STOPPER); + + /* + * Set RISC IRQ physical address start value. + */ + AdvWriteDWordLramNoSwap(iop_base, ASC_MC_IRQ, asc_dvc->irq_sp->carr_pa); + asc_dvc->carr_pending_cnt = 0; + + AdvWriteByteRegister(iop_base, IOPB_INTR_ENABLES, + (ADV_INTR_ENABLE_HOST_INTR | + ADV_INTR_ENABLE_GLOBAL_INTR)); + AdvReadWordLram(iop_base, ASC_MC_CODE_BEGIN_ADDR, word); + AdvWriteWordRegister(iop_base, IOPW_PC, word); + + /* finally, finally, gentlemen, start your engine */ + AdvWriteWordRegister(iop_base, IOPW_RISC_CSR, ADV_RISC_CSR_RUN); + + /* + * Reset the SCSI Bus if the EEPROM indicates that SCSI Bus + * Resets should be performed. The RISC has to be running + * to issue a SCSI Bus Reset. + */ + if (asc_dvc->bios_ctrl & BIOS_CTRL_RESET_SCSI_BUS) { + /* + * If the BIOS Signature is present in memory, restore the + * per TID microcode operating variables. + */ + if (bios_mem[(ASC_MC_BIOS_SIGNATURE - ASC_MC_BIOSMEM) / 2] == + 0x55AA) { + /* + * Restore per TID negotiated values. + */ + AdvWriteWordLram(iop_base, ASC_MC_WDTR_ABLE, wdtr_able); + AdvWriteWordLram(iop_base, ASC_MC_SDTR_ABLE, sdtr_able); + AdvWriteWordLram(iop_base, ASC_MC_PPR_ABLE, ppr_able); + AdvWriteWordLram(iop_base, ASC_MC_TAGQNG_ABLE, + tagqng_able); + for (tid = 0; tid <= ASC_MAX_TID; tid++) { + AdvWriteByteLram(iop_base, + ASC_MC_NUMBER_OF_MAX_CMD + tid, + max_cmd[tid]); + } + } else { + if (AdvResetSB(asc_dvc) != ADV_TRUE) { + warn_code = ASC_WARN_BUSRESET_ERROR; + } + } + } + + return warn_code; +} + +/* + * Reset chip and SCSI Bus. + * + * Return Value: + * ADV_TRUE(1) - Chip re-initialization and SCSI Bus Reset successful. + * ADV_FALSE(0) - Chip re-initialization and SCSI Bus Reset failure. + */ +static int AdvResetChipAndSB(ADV_DVC_VAR *asc_dvc) +{ + int status; + ushort wdtr_able, sdtr_able, tagqng_able; + ushort ppr_able = 0; + uchar tid, max_cmd[ADV_MAX_TID + 1]; + AdvPortAddr iop_base; + ushort bios_sig; + + iop_base = asc_dvc->iop_base; + + /* + * Save current per TID negotiated values. + */ + AdvReadWordLram(iop_base, ASC_MC_WDTR_ABLE, wdtr_able); + AdvReadWordLram(iop_base, ASC_MC_SDTR_ABLE, sdtr_able); + if (asc_dvc->chip_type == ADV_CHIP_ASC38C1600) { + AdvReadWordLram(iop_base, ASC_MC_PPR_ABLE, ppr_able); + } + AdvReadWordLram(iop_base, ASC_MC_TAGQNG_ABLE, tagqng_able); + for (tid = 0; tid <= ADV_MAX_TID; tid++) { + AdvReadByteLram(iop_base, ASC_MC_NUMBER_OF_MAX_CMD + tid, + max_cmd[tid]); + } + + /* + * Force the AdvInitAsc3550/38C0800Driver() function to + * perform a SCSI Bus Reset by clearing the BIOS signature word. + * The initialization functions assumes a SCSI Bus Reset is not + * needed if the BIOS signature word is present. + */ + AdvReadWordLram(iop_base, ASC_MC_BIOS_SIGNATURE, bios_sig); + AdvWriteWordLram(iop_base, ASC_MC_BIOS_SIGNATURE, 0); + + /* + * Stop chip and reset it. + */ + AdvWriteWordRegister(iop_base, IOPW_RISC_CSR, ADV_RISC_CSR_STOP); + AdvWriteWordRegister(iop_base, IOPW_CTRL_REG, ADV_CTRL_REG_CMD_RESET); + mdelay(100); + AdvWriteWordRegister(iop_base, IOPW_CTRL_REG, + ADV_CTRL_REG_CMD_WR_IO_REG); + + /* + * Reset Adv Library error code, if any, and try + * re-initializing the chip. + */ + asc_dvc->err_code = 0; + if (asc_dvc->chip_type == ADV_CHIP_ASC38C1600) { + status = AdvInitAsc38C1600Driver(asc_dvc); + } else if (asc_dvc->chip_type == ADV_CHIP_ASC38C0800) { + status = AdvInitAsc38C0800Driver(asc_dvc); + } else { + status = AdvInitAsc3550Driver(asc_dvc); + } + + /* Translate initialization return value to status value. */ + if (status == 0) { + status = ADV_TRUE; + } else { + status = ADV_FALSE; + } + + /* + * Restore the BIOS signature word. + */ + AdvWriteWordLram(iop_base, ASC_MC_BIOS_SIGNATURE, bios_sig); + + /* + * Restore per TID negotiated values. + */ + AdvWriteWordLram(iop_base, ASC_MC_WDTR_ABLE, wdtr_able); + AdvWriteWordLram(iop_base, ASC_MC_SDTR_ABLE, sdtr_able); + if (asc_dvc->chip_type == ADV_CHIP_ASC38C1600) { + AdvWriteWordLram(iop_base, ASC_MC_PPR_ABLE, ppr_able); + } + AdvWriteWordLram(iop_base, ASC_MC_TAGQNG_ABLE, tagqng_able); + for (tid = 0; tid <= ADV_MAX_TID; tid++) { + AdvWriteByteLram(iop_base, ASC_MC_NUMBER_OF_MAX_CMD + tid, + max_cmd[tid]); + } + + return status; +} + +/* + * adv_async_callback() - Adv Library asynchronous event callback function. + */ +static void adv_async_callback(ADV_DVC_VAR *adv_dvc_varp, uchar code) +{ + switch (code) { + case ADV_ASYNC_SCSI_BUS_RESET_DET: + /* + * The firmware detected a SCSI Bus reset. + */ + ASC_DBG(0, "ADV_ASYNC_SCSI_BUS_RESET_DET\n"); + break; + + case ADV_ASYNC_RDMA_FAILURE: + /* + * Handle RDMA failure by resetting the SCSI Bus and + * possibly the chip if it is unresponsive. Log the error + * with a unique code. + */ + ASC_DBG(0, "ADV_ASYNC_RDMA_FAILURE\n"); + AdvResetChipAndSB(adv_dvc_varp); + break; + + case ADV_HOST_SCSI_BUS_RESET: + /* + * Host generated SCSI bus reset occurred. + */ + ASC_DBG(0, "ADV_HOST_SCSI_BUS_RESET\n"); + break; + + default: + ASC_DBG(0, "unknown code 0x%x\n", code); + break; + } +} + +/* + * adv_isr_callback() - Second Level Interrupt Handler called by AdvISR(). + * + * Callback function for the Wide SCSI Adv Library. + */ +static void adv_isr_callback(ADV_DVC_VAR *adv_dvc_varp, ADV_SCSI_REQ_Q *scsiqp) +{ + struct asc_board *boardp; + adv_req_t *reqp; + adv_sgblk_t *sgblkp; + struct scsi_cmnd *scp; + struct Scsi_Host *shost; + ADV_DCNT resid_cnt; + + ASC_DBG(1, "adv_dvc_varp 0x%lx, scsiqp 0x%lx\n", + (ulong)adv_dvc_varp, (ulong)scsiqp); + ASC_DBG_PRT_ADV_SCSI_REQ_Q(2, scsiqp); + + /* + * Get the adv_req_t structure for the command that has been + * completed. The adv_req_t structure actually contains the + * completed ADV_SCSI_REQ_Q structure. + */ + reqp = (adv_req_t *)ADV_U32_TO_VADDR(scsiqp->srb_ptr); + ASC_DBG(1, "reqp 0x%lx\n", (ulong)reqp); + if (reqp == NULL) { + ASC_PRINT("adv_isr_callback: reqp is NULL\n"); + return; + } + + /* + * Get the struct scsi_cmnd structure and Scsi_Host structure for the + * command that has been completed. + * + * Note: The adv_req_t request structure and adv_sgblk_t structure, + * if any, are dropped, because a board structure pointer can not be + * determined. + */ + scp = reqp->cmndp; + ASC_DBG(1, "scp 0x%p\n", scp); + if (scp == NULL) { + ASC_PRINT + ("adv_isr_callback: scp is NULL; adv_req_t dropped.\n"); + return; + } + ASC_DBG_PRT_CDB(2, scp->cmnd, scp->cmd_len); + + shost = scp->device->host; + ASC_STATS(shost, callback); + ASC_DBG(1, "shost 0x%p\n", shost); + + boardp = shost_priv(shost); + BUG_ON(adv_dvc_varp != &boardp->dvc_var.adv_dvc_var); + + /* + * 'done_status' contains the command's ending status. + */ + switch (scsiqp->done_status) { + case QD_NO_ERROR: + ASC_DBG(2, "QD_NO_ERROR\n"); + scp->result = 0; + + /* + * Check for an underrun condition. + * + * If there was no error and an underrun condition, then + * then return the number of underrun bytes. + */ + resid_cnt = le32_to_cpu(scsiqp->data_cnt); + if (scsi_bufflen(scp) != 0 && resid_cnt != 0 && + resid_cnt <= scsi_bufflen(scp)) { + ASC_DBG(1, "underrun condition %lu bytes\n", + (ulong)resid_cnt); + scsi_set_resid(scp, resid_cnt); + } + break; + + case QD_WITH_ERROR: + ASC_DBG(2, "QD_WITH_ERROR\n"); + switch (scsiqp->host_status) { + case QHSTA_NO_ERROR: + if (scsiqp->scsi_status == SAM_STAT_CHECK_CONDITION) { + ASC_DBG(2, "SAM_STAT_CHECK_CONDITION\n"); + ASC_DBG_PRT_SENSE(2, scp->sense_buffer, + SCSI_SENSE_BUFFERSIZE); + /* + * Note: The 'status_byte()' macro used by + * target drivers defined in scsi.h shifts the + * status byte returned by host drivers right + * by 1 bit. This is why target drivers also + * use right shifted status byte definitions. + * For instance target drivers use + * CHECK_CONDITION, defined to 0x1, instead of + * the SCSI defined check condition value of + * 0x2. Host drivers are supposed to return + * the status byte as it is defined by SCSI. + */ + scp->result = DRIVER_BYTE(DRIVER_SENSE) | + STATUS_BYTE(scsiqp->scsi_status); + } else { + scp->result = STATUS_BYTE(scsiqp->scsi_status); + } + break; + + default: + /* Some other QHSTA error occurred. */ + ASC_DBG(1, "host_status 0x%x\n", scsiqp->host_status); + scp->result = HOST_BYTE(DID_BAD_TARGET); + break; + } + break; + + case QD_ABORTED_BY_HOST: + ASC_DBG(1, "QD_ABORTED_BY_HOST\n"); + scp->result = + HOST_BYTE(DID_ABORT) | STATUS_BYTE(scsiqp->scsi_status); + break; + + default: + ASC_DBG(1, "done_status 0x%x\n", scsiqp->done_status); + scp->result = + HOST_BYTE(DID_ERROR) | STATUS_BYTE(scsiqp->scsi_status); + break; + } + + /* + * If the 'init_tidmask' bit isn't already set for the target and the + * current request finished normally, then set the bit for the target + * to indicate that a device is present. + */ + if ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(scp->device->id)) == 0 && + scsiqp->done_status == QD_NO_ERROR && + scsiqp->host_status == QHSTA_NO_ERROR) { + boardp->init_tidmask |= ADV_TID_TO_TIDMASK(scp->device->id); + } + + asc_scsi_done(scp); + + /* + * Free all 'adv_sgblk_t' structures allocated for the request. + */ + while ((sgblkp = reqp->sgblkp) != NULL) { + /* Remove 'sgblkp' from the request list. */ + reqp->sgblkp = sgblkp->next_sgblkp; + + /* Add 'sgblkp' to the board free list. */ + sgblkp->next_sgblkp = boardp->adv_sgblkp; + boardp->adv_sgblkp = sgblkp; + } + + /* + * Free the adv_req_t structure used with the command by adding + * it back to the board free list. + */ + reqp->next_reqp = boardp->adv_reqp; + boardp->adv_reqp = reqp; + + ASC_DBG(1, "done\n"); +} + +/* + * Adv Library Interrupt Service Routine + * + * This function is called by a driver's interrupt service routine. + * The function disables and re-enables interrupts. + * + * When a microcode idle command is completed, the ADV_DVC_VAR + * 'idle_cmd_done' field is set to ADV_TRUE. + * + * Note: AdvISR() can be called when interrupts are disabled or even + * when there is no hardware interrupt condition present. It will + * always check for completed idle commands and microcode requests. + * This is an important feature that shouldn't be changed because it + * allows commands to be completed from polling mode loops. + * + * Return: + * ADV_TRUE(1) - interrupt was pending + * ADV_FALSE(0) - no interrupt was pending + */ +static int AdvISR(ADV_DVC_VAR *asc_dvc) +{ + AdvPortAddr iop_base; + uchar int_stat; + ushort target_bit; + ADV_CARR_T *free_carrp; + ADV_VADDR irq_next_vpa; + ADV_SCSI_REQ_Q *scsiq; + + iop_base = asc_dvc->iop_base; + + /* Reading the register clears the interrupt. */ + int_stat = AdvReadByteRegister(iop_base, IOPB_INTR_STATUS_REG); + + if ((int_stat & (ADV_INTR_STATUS_INTRA | ADV_INTR_STATUS_INTRB | + ADV_INTR_STATUS_INTRC)) == 0) { + return ADV_FALSE; + } + + /* + * Notify the driver of an asynchronous microcode condition by + * calling the adv_async_callback function. The function + * is passed the microcode ASC_MC_INTRB_CODE byte value. + */ + if (int_stat & ADV_INTR_STATUS_INTRB) { + uchar intrb_code; + + AdvReadByteLram(iop_base, ASC_MC_INTRB_CODE, intrb_code); + + if (asc_dvc->chip_type == ADV_CHIP_ASC3550 || + asc_dvc->chip_type == ADV_CHIP_ASC38C0800) { + if (intrb_code == ADV_ASYNC_CARRIER_READY_FAILURE && + asc_dvc->carr_pending_cnt != 0) { + AdvWriteByteRegister(iop_base, IOPB_TICKLE, + ADV_TICKLE_A); + if (asc_dvc->chip_type == ADV_CHIP_ASC3550) { + AdvWriteByteRegister(iop_base, + IOPB_TICKLE, + ADV_TICKLE_NOP); + } + } + } + + adv_async_callback(asc_dvc, intrb_code); + } + + /* + * Check if the IRQ stopper carrier contains a completed request. + */ + while (((irq_next_vpa = + le32_to_cpu(asc_dvc->irq_sp->next_vpa)) & ASC_RQ_DONE) != 0) { + /* + * Get a pointer to the newly completed ADV_SCSI_REQ_Q structure. + * The RISC will have set 'areq_vpa' to a virtual address. + * + * The firmware will have copied the ASC_SCSI_REQ_Q.scsiq_ptr + * field to the carrier ADV_CARR_T.areq_vpa field. The conversion + * below complements the conversion of ASC_SCSI_REQ_Q.scsiq_ptr' + * in AdvExeScsiQueue(). + */ + scsiq = (ADV_SCSI_REQ_Q *) + ADV_U32_TO_VADDR(le32_to_cpu(asc_dvc->irq_sp->areq_vpa)); + + /* + * Request finished with good status and the queue was not + * DMAed to host memory by the firmware. Set all status fields + * to indicate good status. + */ + if ((irq_next_vpa & ASC_RQ_GOOD) != 0) { + scsiq->done_status = QD_NO_ERROR; + scsiq->host_status = scsiq->scsi_status = 0; + scsiq->data_cnt = 0L; + } + + /* + * Advance the stopper pointer to the next carrier + * ignoring the lower four bits. Free the previous + * stopper carrier. + */ + free_carrp = asc_dvc->irq_sp; + asc_dvc->irq_sp = (ADV_CARR_T *) + ADV_U32_TO_VADDR(ASC_GET_CARRP(irq_next_vpa)); + + free_carrp->next_vpa = + cpu_to_le32(ADV_VADDR_TO_U32(asc_dvc->carr_freelist)); + asc_dvc->carr_freelist = free_carrp; + asc_dvc->carr_pending_cnt--; + + target_bit = ADV_TID_TO_TIDMASK(scsiq->target_id); + + /* + * Clear request microcode control flag. + */ + scsiq->cntl = 0; + + /* + * Notify the driver of the completed request by passing + * the ADV_SCSI_REQ_Q pointer to its callback function. + */ + scsiq->a_flag |= ADV_SCSIQ_DONE; + adv_isr_callback(asc_dvc, scsiq); + /* + * Note: After the driver callback function is called, 'scsiq' + * can no longer be referenced. + * + * Fall through and continue processing other completed + * requests... + */ + } + return ADV_TRUE; +} + +static int AscSetLibErrorCode(ASC_DVC_VAR *asc_dvc, ushort err_code) +{ + if (asc_dvc->err_code == 0) { + asc_dvc->err_code = err_code; + AscWriteLramWord(asc_dvc->iop_base, ASCV_ASCDVC_ERR_CODE_W, + err_code); + } + return err_code; +} + +static void AscAckInterrupt(PortAddr iop_base) +{ + uchar host_flag; + uchar risc_flag; + ushort loop; + + loop = 0; + do { + risc_flag = AscReadLramByte(iop_base, ASCV_RISC_FLAG_B); + if (loop++ > 0x7FFF) { + break; + } + } while ((risc_flag & ASC_RISC_FLAG_GEN_INT) != 0); + host_flag = + AscReadLramByte(iop_base, + ASCV_HOST_FLAG_B) & (~ASC_HOST_FLAG_ACK_INT); + AscWriteLramByte(iop_base, ASCV_HOST_FLAG_B, + (uchar)(host_flag | ASC_HOST_FLAG_ACK_INT)); + AscSetChipStatus(iop_base, CIW_INT_ACK); + loop = 0; + while (AscGetChipStatus(iop_base) & CSW_INT_PENDING) { + AscSetChipStatus(iop_base, CIW_INT_ACK); + if (loop++ > 3) { + break; + } + } + AscWriteLramByte(iop_base, ASCV_HOST_FLAG_B, host_flag); +} + +static uchar AscGetSynPeriodIndex(ASC_DVC_VAR *asc_dvc, uchar syn_time) +{ + const uchar *period_table; + int max_index; + int min_index; + int i; + + period_table = asc_dvc->sdtr_period_tbl; + max_index = (int)asc_dvc->max_sdtr_index; + min_index = (int)asc_dvc->min_sdtr_index; + if ((syn_time <= period_table[max_index])) { + for (i = min_index; i < (max_index - 1); i++) { + if (syn_time <= period_table[i]) { + return (uchar)i; + } + } + return (uchar)max_index; + } else { + return (uchar)(max_index + 1); + } +} + +static uchar +AscMsgOutSDTR(ASC_DVC_VAR *asc_dvc, uchar sdtr_period, uchar sdtr_offset) +{ + EXT_MSG sdtr_buf; + uchar sdtr_period_index; + PortAddr iop_base; + + iop_base = asc_dvc->iop_base; + sdtr_buf.msg_type = EXTENDED_MESSAGE; + sdtr_buf.msg_len = MS_SDTR_LEN; + sdtr_buf.msg_req = EXTENDED_SDTR; + sdtr_buf.xfer_period = sdtr_period; + sdtr_offset &= ASC_SYN_MAX_OFFSET; + sdtr_buf.req_ack_offset = sdtr_offset; + sdtr_period_index = AscGetSynPeriodIndex(asc_dvc, sdtr_period); + if (sdtr_period_index <= asc_dvc->max_sdtr_index) { + AscMemWordCopyPtrToLram(iop_base, ASCV_MSGOUT_BEG, + (uchar *)&sdtr_buf, + sizeof(EXT_MSG) >> 1); + return ((sdtr_period_index << 4) | sdtr_offset); + } else { + sdtr_buf.req_ack_offset = 0; + AscMemWordCopyPtrToLram(iop_base, ASCV_MSGOUT_BEG, + (uchar *)&sdtr_buf, + sizeof(EXT_MSG) >> 1); + return 0; + } +} + +static uchar +AscCalSDTRData(ASC_DVC_VAR *asc_dvc, uchar sdtr_period, uchar syn_offset) +{ + uchar byte; + uchar sdtr_period_ix; + + sdtr_period_ix = AscGetSynPeriodIndex(asc_dvc, sdtr_period); + if (sdtr_period_ix > asc_dvc->max_sdtr_index) + return 0xFF; + byte = (sdtr_period_ix << 4) | (syn_offset & ASC_SYN_MAX_OFFSET); + return byte; +} + +static int AscSetChipSynRegAtID(PortAddr iop_base, uchar id, uchar sdtr_data) +{ + ASC_SCSI_BIT_ID_TYPE org_id; + int i; + int sta = TRUE; + + AscSetBank(iop_base, 1); + org_id = AscReadChipDvcID(iop_base); + for (i = 0; i <= ASC_MAX_TID; i++) { + if (org_id == (0x01 << i)) + break; + } + org_id = (ASC_SCSI_BIT_ID_TYPE) i; + AscWriteChipDvcID(iop_base, id); + if (AscReadChipDvcID(iop_base) == (0x01 << id)) { + AscSetBank(iop_base, 0); + AscSetChipSyn(iop_base, sdtr_data); + if (AscGetChipSyn(iop_base) != sdtr_data) { + sta = FALSE; + } + } else { + sta = FALSE; + } + AscSetBank(iop_base, 1); + AscWriteChipDvcID(iop_base, org_id); + AscSetBank(iop_base, 0); + return (sta); +} + +static void AscSetChipSDTR(PortAddr iop_base, uchar sdtr_data, uchar tid_no) +{ + AscSetChipSynRegAtID(iop_base, tid_no, sdtr_data); + AscPutMCodeSDTRDoneAtID(iop_base, tid_no, sdtr_data); +} + +static int AscIsrChipHalted(ASC_DVC_VAR *asc_dvc) +{ + EXT_MSG ext_msg; + EXT_MSG out_msg; + ushort halt_q_addr; + int sdtr_accept; + ushort int_halt_code; + ASC_SCSI_BIT_ID_TYPE scsi_busy; + ASC_SCSI_BIT_ID_TYPE target_id; + PortAddr iop_base; + uchar tag_code; + uchar q_status; + uchar halt_qp; + uchar sdtr_data; + uchar target_ix; + uchar q_cntl, tid_no; + uchar cur_dvc_qng; + uchar asyn_sdtr; + uchar scsi_status; + struct asc_board *boardp; + + BUG_ON(!asc_dvc->drv_ptr); + boardp = asc_dvc->drv_ptr; + + iop_base = asc_dvc->iop_base; + int_halt_code = AscReadLramWord(iop_base, ASCV_HALTCODE_W); + + halt_qp = AscReadLramByte(iop_base, ASCV_CURCDB_B); + halt_q_addr = ASC_QNO_TO_QADDR(halt_qp); + target_ix = AscReadLramByte(iop_base, + (ushort)(halt_q_addr + + (ushort)ASC_SCSIQ_B_TARGET_IX)); + q_cntl = AscReadLramByte(iop_base, + (ushort)(halt_q_addr + (ushort)ASC_SCSIQ_B_CNTL)); + tid_no = ASC_TIX_TO_TID(target_ix); + target_id = (uchar)ASC_TID_TO_TARGET_ID(tid_no); + if (asc_dvc->pci_fix_asyn_xfer & target_id) { + asyn_sdtr = ASYN_SDTR_DATA_FIX_PCI_REV_AB; + } else { + asyn_sdtr = 0; + } + if (int_halt_code == ASC_HALT_DISABLE_ASYN_USE_SYN_FIX) { + if (asc_dvc->pci_fix_asyn_xfer & target_id) { + AscSetChipSDTR(iop_base, 0, tid_no); + boardp->sdtr_data[tid_no] = 0; + } + AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0); + return (0); + } else if (int_halt_code == ASC_HALT_ENABLE_ASYN_USE_SYN_FIX) { + if (asc_dvc->pci_fix_asyn_xfer & target_id) { + AscSetChipSDTR(iop_base, asyn_sdtr, tid_no); + boardp->sdtr_data[tid_no] = asyn_sdtr; + } + AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0); + return (0); + } else if (int_halt_code == ASC_HALT_EXTMSG_IN) { + AscMemWordCopyPtrFromLram(iop_base, + ASCV_MSGIN_BEG, + (uchar *)&ext_msg, + sizeof(EXT_MSG) >> 1); + + if (ext_msg.msg_type == EXTENDED_MESSAGE && + ext_msg.msg_req == EXTENDED_SDTR && + ext_msg.msg_len == MS_SDTR_LEN) { + sdtr_accept = TRUE; + if ((ext_msg.req_ack_offset > ASC_SYN_MAX_OFFSET)) { + + sdtr_accept = FALSE; + ext_msg.req_ack_offset = ASC_SYN_MAX_OFFSET; + } + if ((ext_msg.xfer_period < + asc_dvc->sdtr_period_tbl[asc_dvc->min_sdtr_index]) + || (ext_msg.xfer_period > + asc_dvc->sdtr_period_tbl[asc_dvc-> + max_sdtr_index])) { + sdtr_accept = FALSE; + ext_msg.xfer_period = + asc_dvc->sdtr_period_tbl[asc_dvc-> + min_sdtr_index]; + } + if (sdtr_accept) { + sdtr_data = + AscCalSDTRData(asc_dvc, ext_msg.xfer_period, + ext_msg.req_ack_offset); + if ((sdtr_data == 0xFF)) { + + q_cntl |= QC_MSG_OUT; + asc_dvc->init_sdtr &= ~target_id; + asc_dvc->sdtr_done &= ~target_id; + AscSetChipSDTR(iop_base, asyn_sdtr, + tid_no); + boardp->sdtr_data[tid_no] = asyn_sdtr; + } + } + if (ext_msg.req_ack_offset == 0) { + + q_cntl &= ~QC_MSG_OUT; + asc_dvc->init_sdtr &= ~target_id; + asc_dvc->sdtr_done &= ~target_id; + AscSetChipSDTR(iop_base, asyn_sdtr, tid_no); + } else { + if (sdtr_accept && (q_cntl & QC_MSG_OUT)) { + q_cntl &= ~QC_MSG_OUT; + asc_dvc->sdtr_done |= target_id; + asc_dvc->init_sdtr |= target_id; + asc_dvc->pci_fix_asyn_xfer &= + ~target_id; + sdtr_data = + AscCalSDTRData(asc_dvc, + ext_msg.xfer_period, + ext_msg. + req_ack_offset); + AscSetChipSDTR(iop_base, sdtr_data, + tid_no); + boardp->sdtr_data[tid_no] = sdtr_data; + } else { + q_cntl |= QC_MSG_OUT; + AscMsgOutSDTR(asc_dvc, + ext_msg.xfer_period, + ext_msg.req_ack_offset); + asc_dvc->pci_fix_asyn_xfer &= + ~target_id; + sdtr_data = + AscCalSDTRData(asc_dvc, + ext_msg.xfer_period, + ext_msg. + req_ack_offset); + AscSetChipSDTR(iop_base, sdtr_data, + tid_no); + boardp->sdtr_data[tid_no] = sdtr_data; + asc_dvc->sdtr_done |= target_id; + asc_dvc->init_sdtr |= target_id; + } + } + + AscWriteLramByte(iop_base, + (ushort)(halt_q_addr + + (ushort)ASC_SCSIQ_B_CNTL), + q_cntl); + AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0); + return (0); + } else if (ext_msg.msg_type == EXTENDED_MESSAGE && + ext_msg.msg_req == EXTENDED_WDTR && + ext_msg.msg_len == MS_WDTR_LEN) { + + ext_msg.wdtr_width = 0; + AscMemWordCopyPtrToLram(iop_base, + ASCV_MSGOUT_BEG, + (uchar *)&ext_msg, + sizeof(EXT_MSG) >> 1); + q_cntl |= QC_MSG_OUT; + AscWriteLramByte(iop_base, + (ushort)(halt_q_addr + + (ushort)ASC_SCSIQ_B_CNTL), + q_cntl); + AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0); + return (0); + } else { + + ext_msg.msg_type = MESSAGE_REJECT; + AscMemWordCopyPtrToLram(iop_base, + ASCV_MSGOUT_BEG, + (uchar *)&ext_msg, + sizeof(EXT_MSG) >> 1); + q_cntl |= QC_MSG_OUT; + AscWriteLramByte(iop_base, + (ushort)(halt_q_addr + + (ushort)ASC_SCSIQ_B_CNTL), + q_cntl); + AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0); + return (0); + } + } else if (int_halt_code == ASC_HALT_CHK_CONDITION) { + + q_cntl |= QC_REQ_SENSE; + + if ((asc_dvc->init_sdtr & target_id) != 0) { + + asc_dvc->sdtr_done &= ~target_id; + + sdtr_data = AscGetMCodeInitSDTRAtID(iop_base, tid_no); + q_cntl |= QC_MSG_OUT; + AscMsgOutSDTR(asc_dvc, + asc_dvc-> + sdtr_period_tbl[(sdtr_data >> 4) & + (uchar)(asc_dvc-> + max_sdtr_index - + 1)], + (uchar)(sdtr_data & (uchar) + ASC_SYN_MAX_OFFSET)); + } + + AscWriteLramByte(iop_base, + (ushort)(halt_q_addr + + (ushort)ASC_SCSIQ_B_CNTL), q_cntl); + + tag_code = AscReadLramByte(iop_base, + (ushort)(halt_q_addr + (ushort) + ASC_SCSIQ_B_TAG_CODE)); + tag_code &= 0xDC; + if ((asc_dvc->pci_fix_asyn_xfer & target_id) + && !(asc_dvc->pci_fix_asyn_xfer_always & target_id) + ) { + + tag_code |= (ASC_TAG_FLAG_DISABLE_DISCONNECT + | ASC_TAG_FLAG_DISABLE_ASYN_USE_SYN_FIX); + + } + AscWriteLramByte(iop_base, + (ushort)(halt_q_addr + + (ushort)ASC_SCSIQ_B_TAG_CODE), + tag_code); + + q_status = AscReadLramByte(iop_base, + (ushort)(halt_q_addr + (ushort) + ASC_SCSIQ_B_STATUS)); + q_status |= (QS_READY | QS_BUSY); + AscWriteLramByte(iop_base, + (ushort)(halt_q_addr + + (ushort)ASC_SCSIQ_B_STATUS), + q_status); + + scsi_busy = AscReadLramByte(iop_base, (ushort)ASCV_SCSIBUSY_B); + scsi_busy &= ~target_id; + AscWriteLramByte(iop_base, (ushort)ASCV_SCSIBUSY_B, scsi_busy); + + AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0); + return (0); + } else if (int_halt_code == ASC_HALT_SDTR_REJECTED) { + + AscMemWordCopyPtrFromLram(iop_base, + ASCV_MSGOUT_BEG, + (uchar *)&out_msg, + sizeof(EXT_MSG) >> 1); + + if ((out_msg.msg_type == EXTENDED_MESSAGE) && + (out_msg.msg_len == MS_SDTR_LEN) && + (out_msg.msg_req == EXTENDED_SDTR)) { + + asc_dvc->init_sdtr &= ~target_id; + asc_dvc->sdtr_done &= ~target_id; + AscSetChipSDTR(iop_base, asyn_sdtr, tid_no); + boardp->sdtr_data[tid_no] = asyn_sdtr; + } + q_cntl &= ~QC_MSG_OUT; + AscWriteLramByte(iop_base, + (ushort)(halt_q_addr + + (ushort)ASC_SCSIQ_B_CNTL), q_cntl); + AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0); + return (0); + } else if (int_halt_code == ASC_HALT_SS_QUEUE_FULL) { + + scsi_status = AscReadLramByte(iop_base, + (ushort)((ushort)halt_q_addr + + (ushort) + ASC_SCSIQ_SCSI_STATUS)); + cur_dvc_qng = + AscReadLramByte(iop_base, + (ushort)((ushort)ASC_QADR_BEG + + (ushort)target_ix)); + if ((cur_dvc_qng > 0) && (asc_dvc->cur_dvc_qng[tid_no] > 0)) { + + scsi_busy = AscReadLramByte(iop_base, + (ushort)ASCV_SCSIBUSY_B); + scsi_busy |= target_id; + AscWriteLramByte(iop_base, + (ushort)ASCV_SCSIBUSY_B, scsi_busy); + asc_dvc->queue_full_or_busy |= target_id; + + if (scsi_status == SAM_STAT_TASK_SET_FULL) { + if (cur_dvc_qng > ASC_MIN_TAGGED_CMD) { + cur_dvc_qng -= 1; + asc_dvc->max_dvc_qng[tid_no] = + cur_dvc_qng; + + AscWriteLramByte(iop_base, + (ushort)((ushort) + ASCV_MAX_DVC_QNG_BEG + + (ushort) + tid_no), + cur_dvc_qng); + + /* + * Set the device queue depth to the + * number of active requests when the + * QUEUE FULL condition was encountered. + */ + boardp->queue_full |= target_id; + boardp->queue_full_cnt[tid_no] = + cur_dvc_qng; + } + } + } + AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0); + return (0); + } +#if CC_VERY_LONG_SG_LIST + else if (int_halt_code == ASC_HALT_HOST_COPY_SG_LIST_TO_RISC) { + uchar q_no; + ushort q_addr; + uchar sg_wk_q_no; + uchar first_sg_wk_q_no; + ASC_SCSI_Q *scsiq; /* Ptr to driver request. */ + ASC_SG_HEAD *sg_head; /* Ptr to driver SG request. */ + ASC_SG_LIST_Q scsi_sg_q; /* Structure written to queue. */ + ushort sg_list_dwords; + ushort sg_entry_cnt; + uchar next_qp; + int i; + + q_no = AscReadLramByte(iop_base, (ushort)ASCV_REQ_SG_LIST_QP); + if (q_no == ASC_QLINK_END) + return 0; + + q_addr = ASC_QNO_TO_QADDR(q_no); + + /* + * Convert the request's SRB pointer to a host ASC_SCSI_REQ + * structure pointer using a macro provided by the driver. + * The ASC_SCSI_REQ pointer provides a pointer to the + * host ASC_SG_HEAD structure. + */ + /* Read request's SRB pointer. */ + scsiq = (ASC_SCSI_Q *) + ASC_SRB2SCSIQ(ASC_U32_TO_VADDR(AscReadLramDWord(iop_base, + (ushort) + (q_addr + + ASC_SCSIQ_D_SRBPTR)))); + + /* + * Get request's first and working SG queue. + */ + sg_wk_q_no = AscReadLramByte(iop_base, + (ushort)(q_addr + + ASC_SCSIQ_B_SG_WK_QP)); + + first_sg_wk_q_no = AscReadLramByte(iop_base, + (ushort)(q_addr + + ASC_SCSIQ_B_FIRST_SG_WK_QP)); + + /* + * Reset request's working SG queue back to the + * first SG queue. + */ + AscWriteLramByte(iop_base, + (ushort)(q_addr + + (ushort)ASC_SCSIQ_B_SG_WK_QP), + first_sg_wk_q_no); + + sg_head = scsiq->sg_head; + + /* + * Set sg_entry_cnt to the number of SG elements + * that will be completed on this interrupt. + * + * Note: The allocated SG queues contain ASC_MAX_SG_LIST - 1 + * SG elements. The data_cnt and data_addr fields which + * add 1 to the SG element capacity are not used when + * restarting SG handling after a halt. + */ + if (scsiq->remain_sg_entry_cnt > (ASC_MAX_SG_LIST - 1)) { + sg_entry_cnt = ASC_MAX_SG_LIST - 1; + + /* + * Keep track of remaining number of SG elements that + * will need to be handled on the next interrupt. + */ + scsiq->remain_sg_entry_cnt -= (ASC_MAX_SG_LIST - 1); + } else { + sg_entry_cnt = scsiq->remain_sg_entry_cnt; + scsiq->remain_sg_entry_cnt = 0; + } + + /* + * Copy SG elements into the list of allocated SG queues. + * + * Last index completed is saved in scsiq->next_sg_index. + */ + next_qp = first_sg_wk_q_no; + q_addr = ASC_QNO_TO_QADDR(next_qp); + scsi_sg_q.sg_head_qp = q_no; + scsi_sg_q.cntl = QCSG_SG_XFER_LIST; + for (i = 0; i < sg_head->queue_cnt; i++) { + scsi_sg_q.seq_no = i + 1; + if (sg_entry_cnt > ASC_SG_LIST_PER_Q) { + sg_list_dwords = (uchar)(ASC_SG_LIST_PER_Q * 2); + sg_entry_cnt -= ASC_SG_LIST_PER_Q; + /* + * After very first SG queue RISC FW uses next + * SG queue first element then checks sg_list_cnt + * against zero and then decrements, so set + * sg_list_cnt 1 less than number of SG elements + * in each SG queue. + */ + scsi_sg_q.sg_list_cnt = ASC_SG_LIST_PER_Q - 1; + scsi_sg_q.sg_cur_list_cnt = + ASC_SG_LIST_PER_Q - 1; + } else { + /* + * This is the last SG queue in the list of + * allocated SG queues. If there are more + * SG elements than will fit in the allocated + * queues, then set the QCSG_SG_XFER_MORE flag. + */ + if (scsiq->remain_sg_entry_cnt != 0) { + scsi_sg_q.cntl |= QCSG_SG_XFER_MORE; + } else { + scsi_sg_q.cntl |= QCSG_SG_XFER_END; + } + /* equals sg_entry_cnt * 2 */ + sg_list_dwords = sg_entry_cnt << 1; + scsi_sg_q.sg_list_cnt = sg_entry_cnt - 1; + scsi_sg_q.sg_cur_list_cnt = sg_entry_cnt - 1; + sg_entry_cnt = 0; + } + + scsi_sg_q.q_no = next_qp; + AscMemWordCopyPtrToLram(iop_base, + q_addr + ASC_SCSIQ_SGHD_CPY_BEG, + (uchar *)&scsi_sg_q, + sizeof(ASC_SG_LIST_Q) >> 1); + + AscMemDWordCopyPtrToLram(iop_base, + q_addr + ASC_SGQ_LIST_BEG, + (uchar *)&sg_head-> + sg_list[scsiq->next_sg_index], + sg_list_dwords); + + scsiq->next_sg_index += ASC_SG_LIST_PER_Q; + + /* + * If the just completed SG queue contained the + * last SG element, then no more SG queues need + * to be written. + */ + if (scsi_sg_q.cntl & QCSG_SG_XFER_END) { + break; + } + + next_qp = AscReadLramByte(iop_base, + (ushort)(q_addr + + ASC_SCSIQ_B_FWD)); + q_addr = ASC_QNO_TO_QADDR(next_qp); + } + + /* + * Clear the halt condition so the RISC will be restarted + * after the return. + */ + AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0); + return (0); + } +#endif /* CC_VERY_LONG_SG_LIST */ + return (0); +} + +/* + * void + * DvcGetQinfo(PortAddr iop_base, ushort s_addr, uchar *inbuf, int words) + * + * Calling/Exit State: + * none + * + * Description: + * Input an ASC_QDONE_INFO structure from the chip + */ +static void +DvcGetQinfo(PortAddr iop_base, ushort s_addr, uchar *inbuf, int words) +{ + int i; + ushort word; + + AscSetChipLramAddr(iop_base, s_addr); + for (i = 0; i < 2 * words; i += 2) { + if (i == 10) { + continue; + } + word = inpw(iop_base + IOP_RAM_DATA); + inbuf[i] = word & 0xff; + inbuf[i + 1] = (word >> 8) & 0xff; + } + ASC_DBG_PRT_HEX(2, "DvcGetQinfo", inbuf, 2 * words); +} + +static uchar +_AscCopyLramScsiDoneQ(PortAddr iop_base, + ushort q_addr, + ASC_QDONE_INFO *scsiq, ASC_DCNT max_dma_count) +{ + ushort _val; + uchar sg_queue_cnt; + + DvcGetQinfo(iop_base, + q_addr + ASC_SCSIQ_DONE_INFO_BEG, + (uchar *)scsiq, + (sizeof(ASC_SCSIQ_2) + sizeof(ASC_SCSIQ_3)) / 2); + + _val = AscReadLramWord(iop_base, + (ushort)(q_addr + (ushort)ASC_SCSIQ_B_STATUS)); + scsiq->q_status = (uchar)_val; + scsiq->q_no = (uchar)(_val >> 8); + _val = AscReadLramWord(iop_base, + (ushort)(q_addr + (ushort)ASC_SCSIQ_B_CNTL)); + scsiq->cntl = (uchar)_val; + sg_queue_cnt = (uchar)(_val >> 8); + _val = AscReadLramWord(iop_base, + (ushort)(q_addr + + (ushort)ASC_SCSIQ_B_SENSE_LEN)); + scsiq->sense_len = (uchar)_val; + scsiq->extra_bytes = (uchar)(_val >> 8); + + /* + * Read high word of remain bytes from alternate location. + */ + scsiq->remain_bytes = (((ADV_DCNT)AscReadLramWord(iop_base, + (ushort)(q_addr + + (ushort) + ASC_SCSIQ_W_ALT_DC1))) + << 16); + /* + * Read low word of remain bytes from original location. + */ + scsiq->remain_bytes += AscReadLramWord(iop_base, + (ushort)(q_addr + (ushort) + ASC_SCSIQ_DW_REMAIN_XFER_CNT)); + + scsiq->remain_bytes &= max_dma_count; + return sg_queue_cnt; +} + +/* + * asc_isr_callback() - Second Level Interrupt Handler called by AscISR(). + * + * Interrupt callback function for the Narrow SCSI Asc Library. + */ +static void asc_isr_callback(ASC_DVC_VAR *asc_dvc_varp, ASC_QDONE_INFO *qdonep) +{ + struct asc_board *boardp; + struct scsi_cmnd *scp; + struct Scsi_Host *shost; + + ASC_DBG(1, "asc_dvc_varp 0x%p, qdonep 0x%p\n", asc_dvc_varp, qdonep); + ASC_DBG_PRT_ASC_QDONE_INFO(2, qdonep); + + scp = advansys_srb_to_ptr(asc_dvc_varp, qdonep->d2.srb_ptr); + if (!scp) + return; + + ASC_DBG_PRT_CDB(2, scp->cmnd, scp->cmd_len); + + shost = scp->device->host; + ASC_STATS(shost, callback); + ASC_DBG(1, "shost 0x%p\n", shost); + + boardp = shost_priv(shost); + BUG_ON(asc_dvc_varp != &boardp->dvc_var.asc_dvc_var); + + dma_unmap_single(boardp->dev, scp->SCp.dma_handle, + SCSI_SENSE_BUFFERSIZE, DMA_FROM_DEVICE); + /* + * 'qdonep' contains the command's ending status. + */ + switch (qdonep->d3.done_stat) { + case QD_NO_ERROR: + ASC_DBG(2, "QD_NO_ERROR\n"); + scp->result = 0; + + /* + * Check for an underrun condition. + * + * If there was no error and an underrun condition, then + * return the number of underrun bytes. + */ + if (scsi_bufflen(scp) != 0 && qdonep->remain_bytes != 0 && + qdonep->remain_bytes <= scsi_bufflen(scp)) { + ASC_DBG(1, "underrun condition %u bytes\n", + (unsigned)qdonep->remain_bytes); + scsi_set_resid(scp, qdonep->remain_bytes); + } + break; + + case QD_WITH_ERROR: + ASC_DBG(2, "QD_WITH_ERROR\n"); + switch (qdonep->d3.host_stat) { + case QHSTA_NO_ERROR: + if (qdonep->d3.scsi_stat == SAM_STAT_CHECK_CONDITION) { + ASC_DBG(2, "SAM_STAT_CHECK_CONDITION\n"); + ASC_DBG_PRT_SENSE(2, scp->sense_buffer, + SCSI_SENSE_BUFFERSIZE); + /* + * Note: The 'status_byte()' macro used by + * target drivers defined in scsi.h shifts the + * status byte returned by host drivers right + * by 1 bit. This is why target drivers also + * use right shifted status byte definitions. + * For instance target drivers use + * CHECK_CONDITION, defined to 0x1, instead of + * the SCSI defined check condition value of + * 0x2. Host drivers are supposed to return + * the status byte as it is defined by SCSI. + */ + scp->result = DRIVER_BYTE(DRIVER_SENSE) | + STATUS_BYTE(qdonep->d3.scsi_stat); + } else { + scp->result = STATUS_BYTE(qdonep->d3.scsi_stat); + } + break; + + default: + /* QHSTA error occurred */ + ASC_DBG(1, "host_stat 0x%x\n", qdonep->d3.host_stat); + scp->result = HOST_BYTE(DID_BAD_TARGET); + break; + } + break; + + case QD_ABORTED_BY_HOST: + ASC_DBG(1, "QD_ABORTED_BY_HOST\n"); + scp->result = + HOST_BYTE(DID_ABORT) | MSG_BYTE(qdonep->d3. + scsi_msg) | + STATUS_BYTE(qdonep->d3.scsi_stat); + break; + + default: + ASC_DBG(1, "done_stat 0x%x\n", qdonep->d3.done_stat); + scp->result = + HOST_BYTE(DID_ERROR) | MSG_BYTE(qdonep->d3. + scsi_msg) | + STATUS_BYTE(qdonep->d3.scsi_stat); + break; + } + + /* + * If the 'init_tidmask' bit isn't already set for the target and the + * current request finished normally, then set the bit for the target + * to indicate that a device is present. + */ + if ((boardp->init_tidmask & ADV_TID_TO_TIDMASK(scp->device->id)) == 0 && + qdonep->d3.done_stat == QD_NO_ERROR && + qdonep->d3.host_stat == QHSTA_NO_ERROR) { + boardp->init_tidmask |= ADV_TID_TO_TIDMASK(scp->device->id); + } + + asc_scsi_done(scp); +} + +static int AscIsrQDone(ASC_DVC_VAR *asc_dvc) +{ + uchar next_qp; + uchar n_q_used; + uchar sg_list_qp; + uchar sg_queue_cnt; + uchar q_cnt; + uchar done_q_tail; + uchar tid_no; + ASC_SCSI_BIT_ID_TYPE scsi_busy; + ASC_SCSI_BIT_ID_TYPE target_id; + PortAddr iop_base; + ushort q_addr; + ushort sg_q_addr; + uchar cur_target_qng; + ASC_QDONE_INFO scsiq_buf; + ASC_QDONE_INFO *scsiq; + int false_overrun; + + iop_base = asc_dvc->iop_base; + n_q_used = 1; + scsiq = (ASC_QDONE_INFO *)&scsiq_buf; + done_q_tail = (uchar)AscGetVarDoneQTail(iop_base); + q_addr = ASC_QNO_TO_QADDR(done_q_tail); + next_qp = AscReadLramByte(iop_base, + (ushort)(q_addr + (ushort)ASC_SCSIQ_B_FWD)); + if (next_qp != ASC_QLINK_END) { + AscPutVarDoneQTail(iop_base, next_qp); + q_addr = ASC_QNO_TO_QADDR(next_qp); + sg_queue_cnt = _AscCopyLramScsiDoneQ(iop_base, q_addr, scsiq, + asc_dvc->max_dma_count); + AscWriteLramByte(iop_base, + (ushort)(q_addr + + (ushort)ASC_SCSIQ_B_STATUS), + (uchar)(scsiq-> + q_status & (uchar)~(QS_READY | + QS_ABORTED))); + tid_no = ASC_TIX_TO_TID(scsiq->d2.target_ix); + target_id = ASC_TIX_TO_TARGET_ID(scsiq->d2.target_ix); + if ((scsiq->cntl & QC_SG_HEAD) != 0) { + sg_q_addr = q_addr; + sg_list_qp = next_qp; + for (q_cnt = 0; q_cnt < sg_queue_cnt; q_cnt++) { + sg_list_qp = AscReadLramByte(iop_base, + (ushort)(sg_q_addr + + (ushort) + ASC_SCSIQ_B_FWD)); + sg_q_addr = ASC_QNO_TO_QADDR(sg_list_qp); + if (sg_list_qp == ASC_QLINK_END) { + AscSetLibErrorCode(asc_dvc, + ASCQ_ERR_SG_Q_LINKS); + scsiq->d3.done_stat = QD_WITH_ERROR; + scsiq->d3.host_stat = + QHSTA_D_QDONE_SG_LIST_CORRUPTED; + goto FATAL_ERR_QDONE; + } + AscWriteLramByte(iop_base, + (ushort)(sg_q_addr + (ushort) + ASC_SCSIQ_B_STATUS), + QS_FREE); + } + n_q_used = sg_queue_cnt + 1; + AscPutVarDoneQTail(iop_base, sg_list_qp); + } + if (asc_dvc->queue_full_or_busy & target_id) { + cur_target_qng = AscReadLramByte(iop_base, + (ushort)((ushort) + ASC_QADR_BEG + + (ushort) + scsiq->d2. + target_ix)); + if (cur_target_qng < asc_dvc->max_dvc_qng[tid_no]) { + scsi_busy = AscReadLramByte(iop_base, (ushort) + ASCV_SCSIBUSY_B); + scsi_busy &= ~target_id; + AscWriteLramByte(iop_base, + (ushort)ASCV_SCSIBUSY_B, + scsi_busy); + asc_dvc->queue_full_or_busy &= ~target_id; + } + } + if (asc_dvc->cur_total_qng >= n_q_used) { + asc_dvc->cur_total_qng -= n_q_used; + if (asc_dvc->cur_dvc_qng[tid_no] != 0) { + asc_dvc->cur_dvc_qng[tid_no]--; + } + } else { + AscSetLibErrorCode(asc_dvc, ASCQ_ERR_CUR_QNG); + scsiq->d3.done_stat = QD_WITH_ERROR; + goto FATAL_ERR_QDONE; + } + if ((scsiq->d2.srb_ptr == 0UL) || + ((scsiq->q_status & QS_ABORTED) != 0)) { + return (0x11); + } else if (scsiq->q_status == QS_DONE) { + false_overrun = FALSE; + if (scsiq->extra_bytes != 0) { + scsiq->remain_bytes += + (ADV_DCNT)scsiq->extra_bytes; + } + if (scsiq->d3.done_stat == QD_WITH_ERROR) { + if (scsiq->d3.host_stat == + QHSTA_M_DATA_OVER_RUN) { + if ((scsiq-> + cntl & (QC_DATA_IN | QC_DATA_OUT)) + == 0) { + scsiq->d3.done_stat = + QD_NO_ERROR; + scsiq->d3.host_stat = + QHSTA_NO_ERROR; + } else if (false_overrun) { + scsiq->d3.done_stat = + QD_NO_ERROR; + scsiq->d3.host_stat = + QHSTA_NO_ERROR; + } + } else if (scsiq->d3.host_stat == + QHSTA_M_HUNG_REQ_SCSI_BUS_RESET) { + AscStopChip(iop_base); + AscSetChipControl(iop_base, + (uchar)(CC_SCSI_RESET + | CC_HALT)); + udelay(60); + AscSetChipControl(iop_base, CC_HALT); + AscSetChipStatus(iop_base, + CIW_CLR_SCSI_RESET_INT); + AscSetChipStatus(iop_base, 0); + AscSetChipControl(iop_base, 0); + } + } + if ((scsiq->cntl & QC_NO_CALLBACK) == 0) { + asc_isr_callback(asc_dvc, scsiq); + } else { + if ((AscReadLramByte(iop_base, + (ushort)(q_addr + (ushort) + ASC_SCSIQ_CDB_BEG)) + == START_STOP)) { + asc_dvc->unit_not_ready &= ~target_id; + if (scsiq->d3.done_stat != QD_NO_ERROR) { + asc_dvc->start_motor &= + ~target_id; + } + } + } + return (1); + } else { + AscSetLibErrorCode(asc_dvc, ASCQ_ERR_Q_STATUS); + FATAL_ERR_QDONE: + if ((scsiq->cntl & QC_NO_CALLBACK) == 0) { + asc_isr_callback(asc_dvc, scsiq); + } + return (0x80); + } + } + return (0); +} + +static int AscISR(ASC_DVC_VAR *asc_dvc) +{ + ASC_CS_TYPE chipstat; + PortAddr iop_base; + ushort saved_ram_addr; + uchar ctrl_reg; + uchar saved_ctrl_reg; + int int_pending; + int status; + uchar host_flag; + + iop_base = asc_dvc->iop_base; + int_pending = FALSE; + + if (AscIsIntPending(iop_base) == 0) + return int_pending; + + if ((asc_dvc->init_state & ASC_INIT_STATE_END_LOAD_MC) == 0) { + return ERR; + } + if (asc_dvc->in_critical_cnt != 0) { + AscSetLibErrorCode(asc_dvc, ASCQ_ERR_ISR_ON_CRITICAL); + return ERR; + } + if (asc_dvc->is_in_int) { + AscSetLibErrorCode(asc_dvc, ASCQ_ERR_ISR_RE_ENTRY); + return ERR; + } + asc_dvc->is_in_int = TRUE; + ctrl_reg = AscGetChipControl(iop_base); + saved_ctrl_reg = ctrl_reg & (~(CC_SCSI_RESET | CC_CHIP_RESET | + CC_SINGLE_STEP | CC_DIAG | CC_TEST)); + chipstat = AscGetChipStatus(iop_base); + if (chipstat & CSW_SCSI_RESET_LATCH) { + if (!(asc_dvc->bus_type & (ASC_IS_VL | ASC_IS_EISA))) { + int i = 10; + int_pending = TRUE; + asc_dvc->sdtr_done = 0; + saved_ctrl_reg &= (uchar)(~CC_HALT); + while ((AscGetChipStatus(iop_base) & + CSW_SCSI_RESET_ACTIVE) && (i-- > 0)) { + mdelay(100); + } + AscSetChipControl(iop_base, (CC_CHIP_RESET | CC_HALT)); + AscSetChipControl(iop_base, CC_HALT); + AscSetChipStatus(iop_base, CIW_CLR_SCSI_RESET_INT); + AscSetChipStatus(iop_base, 0); + chipstat = AscGetChipStatus(iop_base); + } + } + saved_ram_addr = AscGetChipLramAddr(iop_base); + host_flag = AscReadLramByte(iop_base, + ASCV_HOST_FLAG_B) & + (uchar)(~ASC_HOST_FLAG_IN_ISR); + AscWriteLramByte(iop_base, ASCV_HOST_FLAG_B, + (uchar)(host_flag | (uchar)ASC_HOST_FLAG_IN_ISR)); + if ((chipstat & CSW_INT_PENDING) || (int_pending)) { + AscAckInterrupt(iop_base); + int_pending = TRUE; + if ((chipstat & CSW_HALTED) && (ctrl_reg & CC_SINGLE_STEP)) { + if (AscIsrChipHalted(asc_dvc) == ERR) { + goto ISR_REPORT_QDONE_FATAL_ERROR; + } else { + saved_ctrl_reg &= (uchar)(~CC_HALT); + } + } else { + ISR_REPORT_QDONE_FATAL_ERROR: + if ((asc_dvc->dvc_cntl & ASC_CNTL_INT_MULTI_Q) != 0) { + while (((status = + AscIsrQDone(asc_dvc)) & 0x01) != 0) { + } + } else { + do { + if ((status = + AscIsrQDone(asc_dvc)) == 1) { + break; + } + } while (status == 0x11); + } + if ((status & 0x80) != 0) + int_pending = ERR; + } + } + AscWriteLramByte(iop_base, ASCV_HOST_FLAG_B, host_flag); + AscSetChipLramAddr(iop_base, saved_ram_addr); + AscSetChipControl(iop_base, saved_ctrl_reg); + asc_dvc->is_in_int = FALSE; + return int_pending; +} + +/* + * advansys_reset() + * + * Reset the bus associated with the command 'scp'. + * + * This function runs its own thread. Interrupts must be blocked but + * sleeping is allowed and no locking other than for host structures is + * required. Returns SUCCESS or FAILED. + */ +static int advansys_reset(struct scsi_cmnd *scp) +{ + struct Scsi_Host *shost = scp->device->host; + struct asc_board *boardp = shost_priv(shost); + unsigned long flags; + int status; + int ret = SUCCESS; + + ASC_DBG(1, "0x%p\n", scp); + + ASC_STATS(shost, reset); + + scmd_printk(KERN_INFO, scp, "SCSI bus reset started...\n"); + + if (ASC_NARROW_BOARD(boardp)) { + ASC_DVC_VAR *asc_dvc = &boardp->dvc_var.asc_dvc_var; + + /* Reset the chip and SCSI bus. */ + ASC_DBG(1, "before AscInitAsc1000Driver()\n"); + status = AscInitAsc1000Driver(asc_dvc); + + /* Refer to ASC_IERR_* definitions for meaning of 'err_code'. */ + if (asc_dvc->err_code || !asc_dvc->overrun_dma) { + scmd_printk(KERN_INFO, scp, "SCSI bus reset error: " + "0x%x, status: 0x%x\n", asc_dvc->err_code, + status); + ret = FAILED; + } else if (status) { + scmd_printk(KERN_INFO, scp, "SCSI bus reset warning: " + "0x%x\n", status); + } else { + scmd_printk(KERN_INFO, scp, "SCSI bus reset " + "successful\n"); + } + + ASC_DBG(1, "after AscInitAsc1000Driver()\n"); + spin_lock_irqsave(shost->host_lock, flags); + } else { + /* + * If the suggest reset bus flags are set, then reset the bus. + * Otherwise only reset the device. + */ + ADV_DVC_VAR *adv_dvc = &boardp->dvc_var.adv_dvc_var; + + /* + * Reset the target's SCSI bus. + */ + ASC_DBG(1, "before AdvResetChipAndSB()\n"); + switch (AdvResetChipAndSB(adv_dvc)) { + case ASC_TRUE: + scmd_printk(KERN_INFO, scp, "SCSI bus reset " + "successful\n"); + break; + case ASC_FALSE: + default: + scmd_printk(KERN_INFO, scp, "SCSI bus reset error\n"); + ret = FAILED; + break; + } + spin_lock_irqsave(shost->host_lock, flags); + AdvISR(adv_dvc); + } + + /* Save the time of the most recently completed reset. */ + boardp->last_reset = jiffies; + spin_unlock_irqrestore(shost->host_lock, flags); + + ASC_DBG(1, "ret %d\n", ret); + + return ret; +} + +/* + * advansys_biosparam() + * + * Translate disk drive geometry if the "BIOS greater than 1 GB" + * support is enabled for a drive. + * + * ip (information pointer) is an int array with the following definition: + * ip[0]: heads + * ip[1]: sectors + * ip[2]: cylinders + */ +static int +advansys_biosparam(struct scsi_device *sdev, struct block_device *bdev, + sector_t capacity, int ip[]) +{ + struct asc_board *boardp = shost_priv(sdev->host); + + ASC_DBG(1, "begin\n"); + ASC_STATS(sdev->host, biosparam); + if (ASC_NARROW_BOARD(boardp)) { + if ((boardp->dvc_var.asc_dvc_var.dvc_cntl & + ASC_CNTL_BIOS_GT_1GB) && capacity > 0x200000) { + ip[0] = 255; + ip[1] = 63; + } else { + ip[0] = 64; + ip[1] = 32; + } + } else { + if ((boardp->dvc_var.adv_dvc_var.bios_ctrl & + BIOS_CTRL_EXTENDED_XLAT) && capacity > 0x200000) { + ip[0] = 255; + ip[1] = 63; + } else { + ip[0] = 64; + ip[1] = 32; + } + } + ip[2] = (unsigned long)capacity / (ip[0] * ip[1]); + ASC_DBG(1, "end\n"); + return 0; +} + +/* + * First-level interrupt handler. + * + * 'dev_id' is a pointer to the interrupting adapter's Scsi_Host. + */ +static irqreturn_t advansys_interrupt(int irq, void *dev_id) +{ + struct Scsi_Host *shost = dev_id; + struct asc_board *boardp = shost_priv(shost); + irqreturn_t result = IRQ_NONE; + + ASC_DBG(2, "boardp 0x%p\n", boardp); + spin_lock(shost->host_lock); + if (ASC_NARROW_BOARD(boardp)) { + if (AscIsIntPending(shost->io_port)) { + result = IRQ_HANDLED; + ASC_STATS(shost, interrupt); + ASC_DBG(1, "before AscISR()\n"); + AscISR(&boardp->dvc_var.asc_dvc_var); + } + } else { + ASC_DBG(1, "before AdvISR()\n"); + if (AdvISR(&boardp->dvc_var.adv_dvc_var)) { + result = IRQ_HANDLED; + ASC_STATS(shost, interrupt); + } + } + spin_unlock(shost->host_lock); + + ASC_DBG(1, "end\n"); + return result; +} + +static int AscHostReqRiscHalt(PortAddr iop_base) +{ + int count = 0; + int sta = 0; + uchar saved_stop_code; + + if (AscIsChipHalted(iop_base)) + return (1); + saved_stop_code = AscReadLramByte(iop_base, ASCV_STOP_CODE_B); + AscWriteLramByte(iop_base, ASCV_STOP_CODE_B, + ASC_STOP_HOST_REQ_RISC_HALT | ASC_STOP_REQ_RISC_STOP); + do { + if (AscIsChipHalted(iop_base)) { + sta = 1; + break; + } + mdelay(100); + } while (count++ < 20); + AscWriteLramByte(iop_base, ASCV_STOP_CODE_B, saved_stop_code); + return (sta); +} + +static int +AscSetRunChipSynRegAtID(PortAddr iop_base, uchar tid_no, uchar sdtr_data) +{ + int sta = FALSE; + + if (AscHostReqRiscHalt(iop_base)) { + sta = AscSetChipSynRegAtID(iop_base, tid_no, sdtr_data); + AscStartChip(iop_base); + } + return sta; +} + +static void AscAsyncFix(ASC_DVC_VAR *asc_dvc, struct scsi_device *sdev) +{ + char type = sdev->type; + ASC_SCSI_BIT_ID_TYPE tid_bits = 1 << sdev->id; + + if (!(asc_dvc->bug_fix_cntl & ASC_BUG_FIX_ASYN_USE_SYN)) + return; + if (asc_dvc->init_sdtr & tid_bits) + return; + + if ((type == TYPE_ROM) && (strncmp(sdev->vendor, "HP ", 3) == 0)) + asc_dvc->pci_fix_asyn_xfer_always |= tid_bits; + + asc_dvc->pci_fix_asyn_xfer |= tid_bits; + if ((type == TYPE_PROCESSOR) || (type == TYPE_SCANNER) || + (type == TYPE_ROM) || (type == TYPE_TAPE)) + asc_dvc->pci_fix_asyn_xfer &= ~tid_bits; + + if (asc_dvc->pci_fix_asyn_xfer & tid_bits) + AscSetRunChipSynRegAtID(asc_dvc->iop_base, sdev->id, + ASYN_SDTR_DATA_FIX_PCI_REV_AB); +} + +static void +advansys_narrow_slave_configure(struct scsi_device *sdev, ASC_DVC_VAR *asc_dvc) +{ + ASC_SCSI_BIT_ID_TYPE tid_bit = 1 << sdev->id; + ASC_SCSI_BIT_ID_TYPE orig_use_tagged_qng = asc_dvc->use_tagged_qng; + + if (sdev->lun == 0) { + ASC_SCSI_BIT_ID_TYPE orig_init_sdtr = asc_dvc->init_sdtr; + if ((asc_dvc->cfg->sdtr_enable & tid_bit) && sdev->sdtr) { + asc_dvc->init_sdtr |= tid_bit; + } else { + asc_dvc->init_sdtr &= ~tid_bit; + } + + if (orig_init_sdtr != asc_dvc->init_sdtr) + AscAsyncFix(asc_dvc, sdev); + } + + if (sdev->tagged_supported) { + if (asc_dvc->cfg->cmd_qng_enabled & tid_bit) { + if (sdev->lun == 0) { + asc_dvc->cfg->can_tagged_qng |= tid_bit; + asc_dvc->use_tagged_qng |= tid_bit; + } + scsi_change_queue_depth(sdev, + asc_dvc->max_dvc_qng[sdev->id]); + } + } else { + if (sdev->lun == 0) { + asc_dvc->cfg->can_tagged_qng &= ~tid_bit; + asc_dvc->use_tagged_qng &= ~tid_bit; + } + } + + if ((sdev->lun == 0) && + (orig_use_tagged_qng != asc_dvc->use_tagged_qng)) { + AscWriteLramByte(asc_dvc->iop_base, ASCV_DISC_ENABLE_B, + asc_dvc->cfg->disc_enable); + AscWriteLramByte(asc_dvc->iop_base, ASCV_USE_TAGGED_QNG_B, + asc_dvc->use_tagged_qng); + AscWriteLramByte(asc_dvc->iop_base, ASCV_CAN_TAGGED_QNG_B, + asc_dvc->cfg->can_tagged_qng); + + asc_dvc->max_dvc_qng[sdev->id] = + asc_dvc->cfg->max_tag_qng[sdev->id]; + AscWriteLramByte(asc_dvc->iop_base, + (ushort)(ASCV_MAX_DVC_QNG_BEG + sdev->id), + asc_dvc->max_dvc_qng[sdev->id]); + } +} + +/* + * Wide Transfers + * + * If the EEPROM enabled WDTR for the device and the device supports wide + * bus (16 bit) transfers, then turn on the device's 'wdtr_able' bit and + * write the new value to the microcode. + */ +static void +advansys_wide_enable_wdtr(AdvPortAddr iop_base, unsigned short tidmask) +{ + unsigned short cfg_word; + AdvReadWordLram(iop_base, ASC_MC_WDTR_ABLE, cfg_word); + if ((cfg_word & tidmask) != 0) + return; + + cfg_word |= tidmask; + AdvWriteWordLram(iop_base, ASC_MC_WDTR_ABLE, cfg_word); + + /* + * Clear the microcode SDTR and WDTR negotiation done indicators for + * the target to cause it to negotiate with the new setting set above. + * WDTR when accepted causes the target to enter asynchronous mode, so + * SDTR must be negotiated. + */ + AdvReadWordLram(iop_base, ASC_MC_SDTR_DONE, cfg_word); + cfg_word &= ~tidmask; + AdvWriteWordLram(iop_base, ASC_MC_SDTR_DONE, cfg_word); + AdvReadWordLram(iop_base, ASC_MC_WDTR_DONE, cfg_word); + cfg_word &= ~tidmask; + AdvWriteWordLram(iop_base, ASC_MC_WDTR_DONE, cfg_word); +} + +/* + * Synchronous Transfers + * + * If the EEPROM enabled SDTR for the device and the device + * supports synchronous transfers, then turn on the device's + * 'sdtr_able' bit. Write the new value to the microcode. + */ +static void +advansys_wide_enable_sdtr(AdvPortAddr iop_base, unsigned short tidmask) +{ + unsigned short cfg_word; + AdvReadWordLram(iop_base, ASC_MC_SDTR_ABLE, cfg_word); + if ((cfg_word & tidmask) != 0) + return; + + cfg_word |= tidmask; + AdvWriteWordLram(iop_base, ASC_MC_SDTR_ABLE, cfg_word); + + /* + * Clear the microcode "SDTR negotiation" done indicator for the + * target to cause it to negotiate with the new setting set above. + */ + AdvReadWordLram(iop_base, ASC_MC_SDTR_DONE, cfg_word); + cfg_word &= ~tidmask; + AdvWriteWordLram(iop_base, ASC_MC_SDTR_DONE, cfg_word); +} + +/* + * PPR (Parallel Protocol Request) Capable + * + * If the device supports DT mode, then it must be PPR capable. + * The PPR message will be used in place of the SDTR and WDTR + * messages to negotiate synchronous speed and offset, transfer + * width, and protocol options. + */ +static void advansys_wide_enable_ppr(ADV_DVC_VAR *adv_dvc, + AdvPortAddr iop_base, unsigned short tidmask) +{ + AdvReadWordLram(iop_base, ASC_MC_PPR_ABLE, adv_dvc->ppr_able); + adv_dvc->ppr_able |= tidmask; + AdvWriteWordLram(iop_base, ASC_MC_PPR_ABLE, adv_dvc->ppr_able); +} + +static void +advansys_wide_slave_configure(struct scsi_device *sdev, ADV_DVC_VAR *adv_dvc) +{ + AdvPortAddr iop_base = adv_dvc->iop_base; + unsigned short tidmask = 1 << sdev->id; + + if (sdev->lun == 0) { + /* + * Handle WDTR, SDTR, and Tag Queuing. If the feature + * is enabled in the EEPROM and the device supports the + * feature, then enable it in the microcode. + */ + + if ((adv_dvc->wdtr_able & tidmask) && sdev->wdtr) + advansys_wide_enable_wdtr(iop_base, tidmask); + if ((adv_dvc->sdtr_able & tidmask) && sdev->sdtr) + advansys_wide_enable_sdtr(iop_base, tidmask); + if (adv_dvc->chip_type == ADV_CHIP_ASC38C1600 && sdev->ppr) + advansys_wide_enable_ppr(adv_dvc, iop_base, tidmask); + + /* + * Tag Queuing is disabled for the BIOS which runs in polled + * mode and would see no benefit from Tag Queuing. Also by + * disabling Tag Queuing in the BIOS devices with Tag Queuing + * bugs will at least work with the BIOS. + */ + if ((adv_dvc->tagqng_able & tidmask) && + sdev->tagged_supported) { + unsigned short cfg_word; + AdvReadWordLram(iop_base, ASC_MC_TAGQNG_ABLE, cfg_word); + cfg_word |= tidmask; + AdvWriteWordLram(iop_base, ASC_MC_TAGQNG_ABLE, + cfg_word); + AdvWriteByteLram(iop_base, + ASC_MC_NUMBER_OF_MAX_CMD + sdev->id, + adv_dvc->max_dvc_qng); + } + } + + if ((adv_dvc->tagqng_able & tidmask) && sdev->tagged_supported) + scsi_change_queue_depth(sdev, adv_dvc->max_dvc_qng); +} + +/* + * Set the number of commands to queue per device for the + * specified host adapter. + */ +static int advansys_slave_configure(struct scsi_device *sdev) +{ + struct asc_board *boardp = shost_priv(sdev->host); + + if (ASC_NARROW_BOARD(boardp)) + advansys_narrow_slave_configure(sdev, + &boardp->dvc_var.asc_dvc_var); + else + advansys_wide_slave_configure(sdev, + &boardp->dvc_var.adv_dvc_var); + + return 0; +} + +static __le32 advansys_get_sense_buffer_dma(struct scsi_cmnd *scp) +{ + struct asc_board *board = shost_priv(scp->device->host); + scp->SCp.dma_handle = dma_map_single(board->dev, scp->sense_buffer, + SCSI_SENSE_BUFFERSIZE, DMA_FROM_DEVICE); + dma_cache_sync(board->dev, scp->sense_buffer, + SCSI_SENSE_BUFFERSIZE, DMA_FROM_DEVICE); + return cpu_to_le32(scp->SCp.dma_handle); +} + +static int asc_build_req(struct asc_board *boardp, struct scsi_cmnd *scp, + struct asc_scsi_q *asc_scsi_q) +{ + struct asc_dvc_var *asc_dvc = &boardp->dvc_var.asc_dvc_var; + int use_sg; + + memset(asc_scsi_q, 0, sizeof(*asc_scsi_q)); + + /* + * Point the ASC_SCSI_Q to the 'struct scsi_cmnd'. + */ + asc_scsi_q->q2.srb_ptr = advansys_ptr_to_srb(asc_dvc, scp); + if (asc_scsi_q->q2.srb_ptr == BAD_SRB) { + scp->result = HOST_BYTE(DID_SOFT_ERROR); + return ASC_ERROR; + } + + /* + * Build the ASC_SCSI_Q request. + */ + asc_scsi_q->cdbptr = &scp->cmnd[0]; + asc_scsi_q->q2.cdb_len = scp->cmd_len; + asc_scsi_q->q1.target_id = ASC_TID_TO_TARGET_ID(scp->device->id); + asc_scsi_q->q1.target_lun = scp->device->lun; + asc_scsi_q->q2.target_ix = + ASC_TIDLUN_TO_IX(scp->device->id, scp->device->lun); + asc_scsi_q->q1.sense_addr = advansys_get_sense_buffer_dma(scp); + asc_scsi_q->q1.sense_len = SCSI_SENSE_BUFFERSIZE; + + /* + * If there are any outstanding requests for the current target, + * then every 255th request send an ORDERED request. This heuristic + * tries to retain the benefit of request sorting while preventing + * request starvation. 255 is the max number of tags or pending commands + * a device may have outstanding. + * + * The request count is incremented below for every successfully + * started request. + * + */ + if ((asc_dvc->cur_dvc_qng[scp->device->id] > 0) && + (boardp->reqcnt[scp->device->id] % 255) == 0) { + asc_scsi_q->q2.tag_code = ORDERED_QUEUE_TAG; + } else { + asc_scsi_q->q2.tag_code = SIMPLE_QUEUE_TAG; + } + + /* Build ASC_SCSI_Q */ + use_sg = scsi_dma_map(scp); + if (use_sg != 0) { + int sgcnt; + struct scatterlist *slp; + struct asc_sg_head *asc_sg_head; + + if (use_sg > scp->device->host->sg_tablesize) { + scmd_printk(KERN_ERR, scp, "use_sg %d > " + "sg_tablesize %d\n", use_sg, + scp->device->host->sg_tablesize); + scsi_dma_unmap(scp); + scp->result = HOST_BYTE(DID_ERROR); + return ASC_ERROR; + } + + asc_sg_head = kzalloc(sizeof(asc_scsi_q->sg_head) + + use_sg * sizeof(struct asc_sg_list), GFP_ATOMIC); + if (!asc_sg_head) { + scsi_dma_unmap(scp); + scp->result = HOST_BYTE(DID_SOFT_ERROR); + return ASC_ERROR; + } + + asc_scsi_q->q1.cntl |= QC_SG_HEAD; + asc_scsi_q->sg_head = asc_sg_head; + asc_scsi_q->q1.data_cnt = 0; + asc_scsi_q->q1.data_addr = 0; + /* This is a byte value, otherwise it would need to be swapped. */ + asc_sg_head->entry_cnt = asc_scsi_q->q1.sg_queue_cnt = use_sg; + ASC_STATS_ADD(scp->device->host, xfer_elem, + asc_sg_head->entry_cnt); + + /* + * Convert scatter-gather list into ASC_SG_HEAD list. + */ + scsi_for_each_sg(scp, slp, use_sg, sgcnt) { + asc_sg_head->sg_list[sgcnt].addr = + cpu_to_le32(sg_dma_address(slp)); + asc_sg_head->sg_list[sgcnt].bytes = + cpu_to_le32(sg_dma_len(slp)); + ASC_STATS_ADD(scp->device->host, xfer_sect, + DIV_ROUND_UP(sg_dma_len(slp), 512)); + } + } + + ASC_STATS(scp->device->host, xfer_cnt); + + ASC_DBG_PRT_ASC_SCSI_Q(2, asc_scsi_q); + ASC_DBG_PRT_CDB(1, scp->cmnd, scp->cmd_len); + + return ASC_NOERROR; +} + +/* + * Build scatter-gather list for Adv Library (Wide Board). + * + * Additional ADV_SG_BLOCK structures will need to be allocated + * if the total number of scatter-gather elements exceeds + * NO_OF_SG_PER_BLOCK (15). The ADV_SG_BLOCK structures are + * assumed to be physically contiguous. + * + * Return: + * ADV_SUCCESS(1) - SG List successfully created + * ADV_ERROR(-1) - SG List creation failed + */ +static int +adv_get_sglist(struct asc_board *boardp, adv_req_t *reqp, struct scsi_cmnd *scp, + int use_sg) +{ + adv_sgblk_t *sgblkp; + ADV_SCSI_REQ_Q *scsiqp; + struct scatterlist *slp; + int sg_elem_cnt; + ADV_SG_BLOCK *sg_block, *prev_sg_block; + ADV_PADDR sg_block_paddr; + int i; + + scsiqp = (ADV_SCSI_REQ_Q *)ADV_32BALIGN(&reqp->scsi_req_q); + slp = scsi_sglist(scp); + sg_elem_cnt = use_sg; + prev_sg_block = NULL; + reqp->sgblkp = NULL; + + for (;;) { + /* + * Allocate a 'adv_sgblk_t' structure from the board free + * list. One 'adv_sgblk_t' structure holds NO_OF_SG_PER_BLOCK + * (15) scatter-gather elements. + */ + if ((sgblkp = boardp->adv_sgblkp) == NULL) { + ASC_DBG(1, "no free adv_sgblk_t\n"); + ASC_STATS(scp->device->host, adv_build_nosg); + + /* + * Allocation failed. Free 'adv_sgblk_t' structures + * already allocated for the request. + */ + while ((sgblkp = reqp->sgblkp) != NULL) { + /* Remove 'sgblkp' from the request list. */ + reqp->sgblkp = sgblkp->next_sgblkp; + + /* Add 'sgblkp' to the board free list. */ + sgblkp->next_sgblkp = boardp->adv_sgblkp; + boardp->adv_sgblkp = sgblkp; + } + return ASC_BUSY; + } + + /* Complete 'adv_sgblk_t' board allocation. */ + boardp->adv_sgblkp = sgblkp->next_sgblkp; + sgblkp->next_sgblkp = NULL; + + /* + * Get 8 byte aligned virtual and physical addresses + * for the allocated ADV_SG_BLOCK structure. + */ + sg_block = (ADV_SG_BLOCK *)ADV_8BALIGN(&sgblkp->sg_block); + sg_block_paddr = virt_to_bus(sg_block); + + /* + * Check if this is the first 'adv_sgblk_t' for the + * request. + */ + if (reqp->sgblkp == NULL) { + /* Request's first scatter-gather block. */ + reqp->sgblkp = sgblkp; + + /* + * Set ADV_SCSI_REQ_T ADV_SG_BLOCK virtual and physical + * address pointers. + */ + scsiqp->sg_list_ptr = sg_block; + scsiqp->sg_real_addr = cpu_to_le32(sg_block_paddr); + } else { + /* Request's second or later scatter-gather block. */ + sgblkp->next_sgblkp = reqp->sgblkp; + reqp->sgblkp = sgblkp; + + /* + * Point the previous ADV_SG_BLOCK structure to + * the newly allocated ADV_SG_BLOCK structure. + */ + prev_sg_block->sg_ptr = cpu_to_le32(sg_block_paddr); + } + + for (i = 0; i < NO_OF_SG_PER_BLOCK; i++) { + sg_block->sg_list[i].sg_addr = + cpu_to_le32(sg_dma_address(slp)); + sg_block->sg_list[i].sg_count = + cpu_to_le32(sg_dma_len(slp)); + ASC_STATS_ADD(scp->device->host, xfer_sect, + DIV_ROUND_UP(sg_dma_len(slp), 512)); + + if (--sg_elem_cnt == 0) { /* Last ADV_SG_BLOCK and scatter-gather entry. */ + sg_block->sg_cnt = i + 1; + sg_block->sg_ptr = 0L; /* Last ADV_SG_BLOCK in list. */ + return ADV_SUCCESS; + } + slp++; + } + sg_block->sg_cnt = NO_OF_SG_PER_BLOCK; + prev_sg_block = sg_block; + } +} + +/* + * Build a request structure for the Adv Library (Wide Board). + * + * If an adv_req_t can not be allocated to issue the request, + * then return ASC_BUSY. If an error occurs, then return ASC_ERROR. + * + * Multi-byte fields in the ASC_SCSI_REQ_Q that are used by the + * microcode for DMA addresses or math operations are byte swapped + * to little-endian order. + */ +static int +adv_build_req(struct asc_board *boardp, struct scsi_cmnd *scp, + ADV_SCSI_REQ_Q **adv_scsiqpp) +{ + adv_req_t *reqp; + ADV_SCSI_REQ_Q *scsiqp; + int i; + int ret; + int use_sg; + + /* + * Allocate an adv_req_t structure from the board to execute + * the command. + */ + if (boardp->adv_reqp == NULL) { + ASC_DBG(1, "no free adv_req_t\n"); + ASC_STATS(scp->device->host, adv_build_noreq); + return ASC_BUSY; + } else { + reqp = boardp->adv_reqp; + boardp->adv_reqp = reqp->next_reqp; + reqp->next_reqp = NULL; + } + + /* + * Get 32-byte aligned ADV_SCSI_REQ_Q and ADV_SG_BLOCK pointers. + */ + scsiqp = (ADV_SCSI_REQ_Q *)ADV_32BALIGN(&reqp->scsi_req_q); + + /* + * Initialize the structure. + */ + scsiqp->cntl = scsiqp->scsi_cntl = scsiqp->done_status = 0; + + /* + * Set the ADV_SCSI_REQ_Q 'srb_ptr' to point to the adv_req_t structure. + */ + scsiqp->srb_ptr = ADV_VADDR_TO_U32(reqp); + + /* + * Set the adv_req_t 'cmndp' to point to the struct scsi_cmnd structure. + */ + reqp->cmndp = scp; + + /* + * Build the ADV_SCSI_REQ_Q request. + */ + + /* Set CDB length and copy it to the request structure. */ + scsiqp->cdb_len = scp->cmd_len; + /* Copy first 12 CDB bytes to cdb[]. */ + for (i = 0; i < scp->cmd_len && i < 12; i++) { + scsiqp->cdb[i] = scp->cmnd[i]; + } + /* Copy last 4 CDB bytes, if present, to cdb16[]. */ + for (; i < scp->cmd_len; i++) { + scsiqp->cdb16[i - 12] = scp->cmnd[i]; + } + + scsiqp->target_id = scp->device->id; + scsiqp->target_lun = scp->device->lun; + + scsiqp->sense_addr = cpu_to_le32(virt_to_bus(&scp->sense_buffer[0])); + scsiqp->sense_len = SCSI_SENSE_BUFFERSIZE; + + /* Build ADV_SCSI_REQ_Q */ + + use_sg = scsi_dma_map(scp); + if (use_sg == 0) { + /* Zero-length transfer */ + reqp->sgblkp = NULL; + scsiqp->data_cnt = 0; + scsiqp->vdata_addr = NULL; + + scsiqp->data_addr = 0; + scsiqp->sg_list_ptr = NULL; + scsiqp->sg_real_addr = 0; + } else { + if (use_sg > ADV_MAX_SG_LIST) { + scmd_printk(KERN_ERR, scp, "use_sg %d > " + "ADV_MAX_SG_LIST %d\n", use_sg, + scp->device->host->sg_tablesize); + scsi_dma_unmap(scp); + scp->result = HOST_BYTE(DID_ERROR); + + /* + * Free the 'adv_req_t' structure by adding it back + * to the board free list. + */ + reqp->next_reqp = boardp->adv_reqp; + boardp->adv_reqp = reqp; + + return ASC_ERROR; + } + + scsiqp->data_cnt = cpu_to_le32(scsi_bufflen(scp)); + + ret = adv_get_sglist(boardp, reqp, scp, use_sg); + if (ret != ADV_SUCCESS) { + /* + * Free the adv_req_t structure by adding it back to + * the board free list. + */ + reqp->next_reqp = boardp->adv_reqp; + boardp->adv_reqp = reqp; + + return ret; + } + + ASC_STATS_ADD(scp->device->host, xfer_elem, use_sg); + } + + ASC_STATS(scp->device->host, xfer_cnt); + + ASC_DBG_PRT_ADV_SCSI_REQ_Q(2, scsiqp); + ASC_DBG_PRT_CDB(1, scp->cmnd, scp->cmd_len); + + *adv_scsiqpp = scsiqp; + + return ASC_NOERROR; +} + +static int AscSgListToQueue(int sg_list) +{ + int n_sg_list_qs; + + n_sg_list_qs = ((sg_list - 1) / ASC_SG_LIST_PER_Q); + if (((sg_list - 1) % ASC_SG_LIST_PER_Q) != 0) + n_sg_list_qs++; + return n_sg_list_qs + 1; +} + +static uint +AscGetNumOfFreeQueue(ASC_DVC_VAR *asc_dvc, uchar target_ix, uchar n_qs) +{ + uint cur_used_qs; + uint cur_free_qs; + ASC_SCSI_BIT_ID_TYPE target_id; + uchar tid_no; + + target_id = ASC_TIX_TO_TARGET_ID(target_ix); + tid_no = ASC_TIX_TO_TID(target_ix); + if ((asc_dvc->unit_not_ready & target_id) || + (asc_dvc->queue_full_or_busy & target_id)) { + return 0; + } + if (n_qs == 1) { + cur_used_qs = (uint) asc_dvc->cur_total_qng + + (uint) asc_dvc->last_q_shortage + (uint) ASC_MIN_FREE_Q; + } else { + cur_used_qs = (uint) asc_dvc->cur_total_qng + + (uint) ASC_MIN_FREE_Q; + } + if ((uint) (cur_used_qs + n_qs) <= (uint) asc_dvc->max_total_qng) { + cur_free_qs = (uint) asc_dvc->max_total_qng - cur_used_qs; + if (asc_dvc->cur_dvc_qng[tid_no] >= + asc_dvc->max_dvc_qng[tid_no]) { + return 0; + } + return cur_free_qs; + } + if (n_qs > 1) { + if ((n_qs > asc_dvc->last_q_shortage) + && (n_qs <= (asc_dvc->max_total_qng - ASC_MIN_FREE_Q))) { + asc_dvc->last_q_shortage = n_qs; + } + } + return 0; +} + +static uchar AscAllocFreeQueue(PortAddr iop_base, uchar free_q_head) +{ + ushort q_addr; + uchar next_qp; + uchar q_status; + + q_addr = ASC_QNO_TO_QADDR(free_q_head); + q_status = (uchar)AscReadLramByte(iop_base, + (ushort)(q_addr + + ASC_SCSIQ_B_STATUS)); + next_qp = AscReadLramByte(iop_base, (ushort)(q_addr + ASC_SCSIQ_B_FWD)); + if (((q_status & QS_READY) == 0) && (next_qp != ASC_QLINK_END)) + return next_qp; + return ASC_QLINK_END; +} + +static uchar +AscAllocMultipleFreeQueue(PortAddr iop_base, uchar free_q_head, uchar n_free_q) +{ + uchar i; + + for (i = 0; i < n_free_q; i++) { + free_q_head = AscAllocFreeQueue(iop_base, free_q_head); + if (free_q_head == ASC_QLINK_END) + break; + } + return free_q_head; +} + +/* + * void + * DvcPutScsiQ(PortAddr iop_base, ushort s_addr, uchar *outbuf, int words) + * + * Calling/Exit State: + * none + * + * Description: + * Output an ASC_SCSI_Q structure to the chip + */ +static void +DvcPutScsiQ(PortAddr iop_base, ushort s_addr, uchar *outbuf, int words) +{ + int i; + + ASC_DBG_PRT_HEX(2, "DvcPutScsiQ", outbuf, 2 * words); + AscSetChipLramAddr(iop_base, s_addr); + for (i = 0; i < 2 * words; i += 2) { + if (i == 4 || i == 20) { + continue; + } + outpw(iop_base + IOP_RAM_DATA, + ((ushort)outbuf[i + 1] << 8) | outbuf[i]); + } +} + +static int AscPutReadyQueue(ASC_DVC_VAR *asc_dvc, ASC_SCSI_Q *scsiq, uchar q_no) +{ + ushort q_addr; + uchar tid_no; + uchar sdtr_data; + uchar syn_period_ix; + uchar syn_offset; + PortAddr iop_base; + + iop_base = asc_dvc->iop_base; + if (((asc_dvc->init_sdtr & scsiq->q1.target_id) != 0) && + ((asc_dvc->sdtr_done & scsiq->q1.target_id) == 0)) { + tid_no = ASC_TIX_TO_TID(scsiq->q2.target_ix); + sdtr_data = AscGetMCodeInitSDTRAtID(iop_base, tid_no); + syn_period_ix = + (sdtr_data >> 4) & (asc_dvc->max_sdtr_index - 1); + syn_offset = sdtr_data & ASC_SYN_MAX_OFFSET; + AscMsgOutSDTR(asc_dvc, + asc_dvc->sdtr_period_tbl[syn_period_ix], + syn_offset); + scsiq->q1.cntl |= QC_MSG_OUT; + } + q_addr = ASC_QNO_TO_QADDR(q_no); + if ((scsiq->q1.target_id & asc_dvc->use_tagged_qng) == 0) { + scsiq->q2.tag_code &= ~SIMPLE_QUEUE_TAG; + } + scsiq->q1.status = QS_FREE; + AscMemWordCopyPtrToLram(iop_base, + q_addr + ASC_SCSIQ_CDB_BEG, + (uchar *)scsiq->cdbptr, scsiq->q2.cdb_len >> 1); + + DvcPutScsiQ(iop_base, + q_addr + ASC_SCSIQ_CPY_BEG, + (uchar *)&scsiq->q1.cntl, + ((sizeof(ASC_SCSIQ_1) + sizeof(ASC_SCSIQ_2)) / 2) - 1); + AscWriteLramWord(iop_base, + (ushort)(q_addr + (ushort)ASC_SCSIQ_B_STATUS), + (ushort)(((ushort)scsiq->q1. + q_no << 8) | (ushort)QS_READY)); + return 1; +} + +static int +AscPutReadySgListQueue(ASC_DVC_VAR *asc_dvc, ASC_SCSI_Q *scsiq, uchar q_no) +{ + int sta; + int i; + ASC_SG_HEAD *sg_head; + ASC_SG_LIST_Q scsi_sg_q; + ASC_DCNT saved_data_addr; + ASC_DCNT saved_data_cnt; + PortAddr iop_base; + ushort sg_list_dwords; + ushort sg_index; + ushort sg_entry_cnt; + ushort q_addr; + uchar next_qp; + + iop_base = asc_dvc->iop_base; + sg_head = scsiq->sg_head; + saved_data_addr = scsiq->q1.data_addr; + saved_data_cnt = scsiq->q1.data_cnt; + scsiq->q1.data_addr = (ASC_PADDR) sg_head->sg_list[0].addr; + scsiq->q1.data_cnt = (ASC_DCNT) sg_head->sg_list[0].bytes; +#if CC_VERY_LONG_SG_LIST + /* + * If sg_head->entry_cnt is greater than ASC_MAX_SG_LIST + * then not all SG elements will fit in the allocated queues. + * The rest of the SG elements will be copied when the RISC + * completes the SG elements that fit and halts. + */ + if (sg_head->entry_cnt > ASC_MAX_SG_LIST) { + /* + * Set sg_entry_cnt to be the number of SG elements that + * will fit in the allocated SG queues. It is minus 1, because + * the first SG element is handled above. ASC_MAX_SG_LIST is + * already inflated by 1 to account for this. For example it + * may be 50 which is 1 + 7 queues * 7 SG elements. + */ + sg_entry_cnt = ASC_MAX_SG_LIST - 1; + + /* + * Keep track of remaining number of SG elements that will + * need to be handled from a_isr.c. + */ + scsiq->remain_sg_entry_cnt = + sg_head->entry_cnt - ASC_MAX_SG_LIST; + } else { +#endif /* CC_VERY_LONG_SG_LIST */ + /* + * Set sg_entry_cnt to be the number of SG elements that + * will fit in the allocated SG queues. It is minus 1, because + * the first SG element is handled above. + */ + sg_entry_cnt = sg_head->entry_cnt - 1; +#if CC_VERY_LONG_SG_LIST + } +#endif /* CC_VERY_LONG_SG_LIST */ + if (sg_entry_cnt != 0) { + scsiq->q1.cntl |= QC_SG_HEAD; + q_addr = ASC_QNO_TO_QADDR(q_no); + sg_index = 1; + scsiq->q1.sg_queue_cnt = sg_head->queue_cnt; + scsi_sg_q.sg_head_qp = q_no; + scsi_sg_q.cntl = QCSG_SG_XFER_LIST; + for (i = 0; i < sg_head->queue_cnt; i++) { + scsi_sg_q.seq_no = i + 1; + if (sg_entry_cnt > ASC_SG_LIST_PER_Q) { + sg_list_dwords = (uchar)(ASC_SG_LIST_PER_Q * 2); + sg_entry_cnt -= ASC_SG_LIST_PER_Q; + if (i == 0) { + scsi_sg_q.sg_list_cnt = + ASC_SG_LIST_PER_Q; + scsi_sg_q.sg_cur_list_cnt = + ASC_SG_LIST_PER_Q; + } else { + scsi_sg_q.sg_list_cnt = + ASC_SG_LIST_PER_Q - 1; + scsi_sg_q.sg_cur_list_cnt = + ASC_SG_LIST_PER_Q - 1; + } + } else { +#if CC_VERY_LONG_SG_LIST + /* + * This is the last SG queue in the list of + * allocated SG queues. If there are more + * SG elements than will fit in the allocated + * queues, then set the QCSG_SG_XFER_MORE flag. + */ + if (sg_head->entry_cnt > ASC_MAX_SG_LIST) { + scsi_sg_q.cntl |= QCSG_SG_XFER_MORE; + } else { +#endif /* CC_VERY_LONG_SG_LIST */ + scsi_sg_q.cntl |= QCSG_SG_XFER_END; +#if CC_VERY_LONG_SG_LIST + } +#endif /* CC_VERY_LONG_SG_LIST */ + sg_list_dwords = sg_entry_cnt << 1; + if (i == 0) { + scsi_sg_q.sg_list_cnt = sg_entry_cnt; + scsi_sg_q.sg_cur_list_cnt = + sg_entry_cnt; + } else { + scsi_sg_q.sg_list_cnt = + sg_entry_cnt - 1; + scsi_sg_q.sg_cur_list_cnt = + sg_entry_cnt - 1; + } + sg_entry_cnt = 0; + } + next_qp = AscReadLramByte(iop_base, + (ushort)(q_addr + + ASC_SCSIQ_B_FWD)); + scsi_sg_q.q_no = next_qp; + q_addr = ASC_QNO_TO_QADDR(next_qp); + AscMemWordCopyPtrToLram(iop_base, + q_addr + ASC_SCSIQ_SGHD_CPY_BEG, + (uchar *)&scsi_sg_q, + sizeof(ASC_SG_LIST_Q) >> 1); + AscMemDWordCopyPtrToLram(iop_base, + q_addr + ASC_SGQ_LIST_BEG, + (uchar *)&sg_head-> + sg_list[sg_index], + sg_list_dwords); + sg_index += ASC_SG_LIST_PER_Q; + scsiq->next_sg_index = sg_index; + } + } else { + scsiq->q1.cntl &= ~QC_SG_HEAD; + } + sta = AscPutReadyQueue(asc_dvc, scsiq, q_no); + scsiq->q1.data_addr = saved_data_addr; + scsiq->q1.data_cnt = saved_data_cnt; + return (sta); +} + +static int +AscSendScsiQueue(ASC_DVC_VAR *asc_dvc, ASC_SCSI_Q *scsiq, uchar n_q_required) +{ + PortAddr iop_base; + uchar free_q_head; + uchar next_qp; + uchar tid_no; + uchar target_ix; + int sta; + + iop_base = asc_dvc->iop_base; + target_ix = scsiq->q2.target_ix; + tid_no = ASC_TIX_TO_TID(target_ix); + sta = 0; + free_q_head = (uchar)AscGetVarFreeQHead(iop_base); + if (n_q_required > 1) { + next_qp = AscAllocMultipleFreeQueue(iop_base, free_q_head, + (uchar)n_q_required); + if (next_qp != ASC_QLINK_END) { + asc_dvc->last_q_shortage = 0; + scsiq->sg_head->queue_cnt = n_q_required - 1; + scsiq->q1.q_no = free_q_head; + sta = AscPutReadySgListQueue(asc_dvc, scsiq, + free_q_head); + } + } else if (n_q_required == 1) { + next_qp = AscAllocFreeQueue(iop_base, free_q_head); + if (next_qp != ASC_QLINK_END) { + scsiq->q1.q_no = free_q_head; + sta = AscPutReadyQueue(asc_dvc, scsiq, free_q_head); + } + } + if (sta == 1) { + AscPutVarFreeQHead(iop_base, next_qp); + asc_dvc->cur_total_qng += n_q_required; + asc_dvc->cur_dvc_qng[tid_no]++; + } + return sta; +} + +#define ASC_SYN_OFFSET_ONE_DISABLE_LIST 16 +static uchar _syn_offset_one_disable_cmd[ASC_SYN_OFFSET_ONE_DISABLE_LIST] = { + INQUIRY, + REQUEST_SENSE, + READ_CAPACITY, + READ_TOC, + MODE_SELECT, + MODE_SENSE, + MODE_SELECT_10, + MODE_SENSE_10, + 0xFF, + 0xFF, + 0xFF, + 0xFF, + 0xFF, + 0xFF, + 0xFF, + 0xFF +}; + +static int AscExeScsiQueue(ASC_DVC_VAR *asc_dvc, ASC_SCSI_Q *scsiq) +{ + PortAddr iop_base; + int sta; + int n_q_required; + int disable_syn_offset_one_fix; + int i; + ASC_PADDR addr; + ushort sg_entry_cnt = 0; + ushort sg_entry_cnt_minus_one = 0; + uchar target_ix; + uchar tid_no; + uchar sdtr_data; + uchar extra_bytes; + uchar scsi_cmd; + uchar disable_cmd; + ASC_SG_HEAD *sg_head; + ASC_DCNT data_cnt; + + iop_base = asc_dvc->iop_base; + sg_head = scsiq->sg_head; + if (asc_dvc->err_code != 0) + return (ERR); + scsiq->q1.q_no = 0; + if ((scsiq->q2.tag_code & ASC_TAG_FLAG_EXTRA_BYTES) == 0) { + scsiq->q1.extra_bytes = 0; + } + sta = 0; + target_ix = scsiq->q2.target_ix; + tid_no = ASC_TIX_TO_TID(target_ix); + n_q_required = 1; + if (scsiq->cdbptr[0] == REQUEST_SENSE) { + if ((asc_dvc->init_sdtr & scsiq->q1.target_id) != 0) { + asc_dvc->sdtr_done &= ~scsiq->q1.target_id; + sdtr_data = AscGetMCodeInitSDTRAtID(iop_base, tid_no); + AscMsgOutSDTR(asc_dvc, + asc_dvc-> + sdtr_period_tbl[(sdtr_data >> 4) & + (uchar)(asc_dvc-> + max_sdtr_index - + 1)], + (uchar)(sdtr_data & (uchar) + ASC_SYN_MAX_OFFSET)); + scsiq->q1.cntl |= (QC_MSG_OUT | QC_URGENT); + } + } + if (asc_dvc->in_critical_cnt != 0) { + AscSetLibErrorCode(asc_dvc, ASCQ_ERR_CRITICAL_RE_ENTRY); + return (ERR); + } + asc_dvc->in_critical_cnt++; + if ((scsiq->q1.cntl & QC_SG_HEAD) != 0) { + if ((sg_entry_cnt = sg_head->entry_cnt) == 0) { + asc_dvc->in_critical_cnt--; + return (ERR); + } +#if !CC_VERY_LONG_SG_LIST + if (sg_entry_cnt > ASC_MAX_SG_LIST) { + asc_dvc->in_critical_cnt--; + return (ERR); + } +#endif /* !CC_VERY_LONG_SG_LIST */ + if (sg_entry_cnt == 1) { + scsiq->q1.data_addr = + (ADV_PADDR)sg_head->sg_list[0].addr; + scsiq->q1.data_cnt = + (ADV_DCNT)sg_head->sg_list[0].bytes; + scsiq->q1.cntl &= ~(QC_SG_HEAD | QC_SG_SWAP_QUEUE); + } + sg_entry_cnt_minus_one = sg_entry_cnt - 1; + } + scsi_cmd = scsiq->cdbptr[0]; + disable_syn_offset_one_fix = FALSE; + if ((asc_dvc->pci_fix_asyn_xfer & scsiq->q1.target_id) && + !(asc_dvc->pci_fix_asyn_xfer_always & scsiq->q1.target_id)) { + if (scsiq->q1.cntl & QC_SG_HEAD) { + data_cnt = 0; + for (i = 0; i < sg_entry_cnt; i++) { + data_cnt += + (ADV_DCNT)le32_to_cpu(sg_head->sg_list[i]. + bytes); + } + } else { + data_cnt = le32_to_cpu(scsiq->q1.data_cnt); + } + if (data_cnt != 0UL) { + if (data_cnt < 512UL) { + disable_syn_offset_one_fix = TRUE; + } else { + for (i = 0; i < ASC_SYN_OFFSET_ONE_DISABLE_LIST; + i++) { + disable_cmd = + _syn_offset_one_disable_cmd[i]; + if (disable_cmd == 0xFF) { + break; + } + if (scsi_cmd == disable_cmd) { + disable_syn_offset_one_fix = + TRUE; + break; + } + } + } + } + } + if (disable_syn_offset_one_fix) { + scsiq->q2.tag_code &= ~SIMPLE_QUEUE_TAG; + scsiq->q2.tag_code |= (ASC_TAG_FLAG_DISABLE_ASYN_USE_SYN_FIX | + ASC_TAG_FLAG_DISABLE_DISCONNECT); + } else { + scsiq->q2.tag_code &= 0x27; + } + if ((scsiq->q1.cntl & QC_SG_HEAD) != 0) { + if (asc_dvc->bug_fix_cntl) { + if (asc_dvc->bug_fix_cntl & ASC_BUG_FIX_IF_NOT_DWB) { + if ((scsi_cmd == READ_6) || + (scsi_cmd == READ_10)) { + addr = + (ADV_PADDR)le32_to_cpu(sg_head-> + sg_list + [sg_entry_cnt_minus_one]. + addr) + + (ADV_DCNT)le32_to_cpu(sg_head-> + sg_list + [sg_entry_cnt_minus_one]. + bytes); + extra_bytes = + (uchar)((ushort)addr & 0x0003); + if ((extra_bytes != 0) + && + ((scsiq->q2. + tag_code & + ASC_TAG_FLAG_EXTRA_BYTES) + == 0)) { + scsiq->q2.tag_code |= + ASC_TAG_FLAG_EXTRA_BYTES; + scsiq->q1.extra_bytes = + extra_bytes; + data_cnt = + le32_to_cpu(sg_head-> + sg_list + [sg_entry_cnt_minus_one]. + bytes); + data_cnt -= + (ASC_DCNT) extra_bytes; + sg_head-> + sg_list + [sg_entry_cnt_minus_one]. + bytes = + cpu_to_le32(data_cnt); + } + } + } + } + sg_head->entry_to_copy = sg_head->entry_cnt; +#if CC_VERY_LONG_SG_LIST + /* + * Set the sg_entry_cnt to the maximum possible. The rest of + * the SG elements will be copied when the RISC completes the + * SG elements that fit and halts. + */ + if (sg_entry_cnt > ASC_MAX_SG_LIST) { + sg_entry_cnt = ASC_MAX_SG_LIST; + } +#endif /* CC_VERY_LONG_SG_LIST */ + n_q_required = AscSgListToQueue(sg_entry_cnt); + if ((AscGetNumOfFreeQueue(asc_dvc, target_ix, n_q_required) >= + (uint) n_q_required) + || ((scsiq->q1.cntl & QC_URGENT) != 0)) { + if ((sta = + AscSendScsiQueue(asc_dvc, scsiq, + n_q_required)) == 1) { + asc_dvc->in_critical_cnt--; + return (sta); + } + } + } else { + if (asc_dvc->bug_fix_cntl) { + if (asc_dvc->bug_fix_cntl & ASC_BUG_FIX_IF_NOT_DWB) { + if ((scsi_cmd == READ_6) || + (scsi_cmd == READ_10)) { + addr = + le32_to_cpu(scsiq->q1.data_addr) + + le32_to_cpu(scsiq->q1.data_cnt); + extra_bytes = + (uchar)((ushort)addr & 0x0003); + if ((extra_bytes != 0) + && + ((scsiq->q2. + tag_code & + ASC_TAG_FLAG_EXTRA_BYTES) + == 0)) { + data_cnt = + le32_to_cpu(scsiq->q1. + data_cnt); + if (((ushort)data_cnt & 0x01FF) + == 0) { + scsiq->q2.tag_code |= + ASC_TAG_FLAG_EXTRA_BYTES; + data_cnt -= (ASC_DCNT) + extra_bytes; + scsiq->q1.data_cnt = + cpu_to_le32 + (data_cnt); + scsiq->q1.extra_bytes = + extra_bytes; + } + } + } + } + } + n_q_required = 1; + if ((AscGetNumOfFreeQueue(asc_dvc, target_ix, 1) >= 1) || + ((scsiq->q1.cntl & QC_URGENT) != 0)) { + if ((sta = AscSendScsiQueue(asc_dvc, scsiq, + n_q_required)) == 1) { + asc_dvc->in_critical_cnt--; + return (sta); + } + } + } + asc_dvc->in_critical_cnt--; + return (sta); +} + +/* + * AdvExeScsiQueue() - Send a request to the RISC microcode program. + * + * Allocate a carrier structure, point the carrier to the ADV_SCSI_REQ_Q, + * add the carrier to the ICQ (Initiator Command Queue), and tickle the + * RISC to notify it a new command is ready to be executed. + * + * If 'done_status' is not set to QD_DO_RETRY, then 'error_retry' will be + * set to SCSI_MAX_RETRY. + * + * Multi-byte fields in the ASC_SCSI_REQ_Q that are used by the microcode + * for DMA addresses or math operations are byte swapped to little-endian + * order. + * + * Return: + * ADV_SUCCESS(1) - The request was successfully queued. + * ADV_BUSY(0) - Resource unavailable; Retry again after pending + * request completes. + * ADV_ERROR(-1) - Invalid ADV_SCSI_REQ_Q request structure + * host IC error. + */ +static int AdvExeScsiQueue(ADV_DVC_VAR *asc_dvc, ADV_SCSI_REQ_Q *scsiq) +{ + AdvPortAddr iop_base; + ADV_PADDR req_paddr; + ADV_CARR_T *new_carrp; + + /* + * The ADV_SCSI_REQ_Q 'target_id' field should never exceed ADV_MAX_TID. + */ + if (scsiq->target_id > ADV_MAX_TID) { + scsiq->host_status = QHSTA_M_INVALID_DEVICE; + scsiq->done_status = QD_WITH_ERROR; + return ADV_ERROR; + } + + iop_base = asc_dvc->iop_base; + + /* + * Allocate a carrier ensuring at least one carrier always + * remains on the freelist and initialize fields. + */ + if ((new_carrp = asc_dvc->carr_freelist) == NULL) { + return ADV_BUSY; + } + asc_dvc->carr_freelist = (ADV_CARR_T *) + ADV_U32_TO_VADDR(le32_to_cpu(new_carrp->next_vpa)); + asc_dvc->carr_pending_cnt++; + + /* + * Set the carrier to be a stopper by setting 'next_vpa' + * to the stopper value. The current stopper will be changed + * below to point to the new stopper. + */ + new_carrp->next_vpa = cpu_to_le32(ASC_CQ_STOPPER); + + /* + * Clear the ADV_SCSI_REQ_Q done flag. + */ + scsiq->a_flag &= ~ADV_SCSIQ_DONE; + + req_paddr = virt_to_bus(scsiq); + BUG_ON(req_paddr & 31); + /* Wait for assertion before making little-endian */ + req_paddr = cpu_to_le32(req_paddr); + + /* Save virtual and physical address of ADV_SCSI_REQ_Q and carrier. */ + scsiq->scsiq_ptr = cpu_to_le32(ADV_VADDR_TO_U32(scsiq)); + scsiq->scsiq_rptr = req_paddr; + + scsiq->carr_va = cpu_to_le32(ADV_VADDR_TO_U32(asc_dvc->icq_sp)); + /* + * Every ADV_CARR_T.carr_pa is byte swapped to little-endian + * order during initialization. + */ + scsiq->carr_pa = asc_dvc->icq_sp->carr_pa; + + /* + * Use the current stopper to send the ADV_SCSI_REQ_Q command to + * the microcode. The newly allocated stopper will become the new + * stopper. + */ + asc_dvc->icq_sp->areq_vpa = req_paddr; + + /* + * Set the 'next_vpa' pointer for the old stopper to be the + * physical address of the new stopper. The RISC can only + * follow physical addresses. + */ + asc_dvc->icq_sp->next_vpa = new_carrp->carr_pa; + + /* + * Set the host adapter stopper pointer to point to the new carrier. + */ + asc_dvc->icq_sp = new_carrp; + + if (asc_dvc->chip_type == ADV_CHIP_ASC3550 || + asc_dvc->chip_type == ADV_CHIP_ASC38C0800) { + /* + * Tickle the RISC to tell it to read its Command Queue Head pointer. + */ + AdvWriteByteRegister(iop_base, IOPB_TICKLE, ADV_TICKLE_A); + if (asc_dvc->chip_type == ADV_CHIP_ASC3550) { + /* + * Clear the tickle value. In the ASC-3550 the RISC flag + * command 'clr_tickle_a' does not work unless the host + * value is cleared. + */ + AdvWriteByteRegister(iop_base, IOPB_TICKLE, + ADV_TICKLE_NOP); + } + } else if (asc_dvc->chip_type == ADV_CHIP_ASC38C1600) { + /* + * Notify the RISC a carrier is ready by writing the physical + * address of the new carrier stopper to the COMMA register. + */ + AdvWriteDWordRegister(iop_base, IOPDW_COMMA, + le32_to_cpu(new_carrp->carr_pa)); + } + + return ADV_SUCCESS; +} + +/* + * Execute a single 'Scsi_Cmnd'. + */ +static int asc_execute_scsi_cmnd(struct scsi_cmnd *scp) +{ + int ret, err_code; + struct asc_board *boardp = shost_priv(scp->device->host); + + ASC_DBG(1, "scp 0x%p\n", scp); + + if (ASC_NARROW_BOARD(boardp)) { + ASC_DVC_VAR *asc_dvc = &boardp->dvc_var.asc_dvc_var; + struct asc_scsi_q asc_scsi_q; + + /* asc_build_req() can not return ASC_BUSY. */ + ret = asc_build_req(boardp, scp, &asc_scsi_q); + if (ret == ASC_ERROR) { + ASC_STATS(scp->device->host, build_error); + return ASC_ERROR; + } + + ret = AscExeScsiQueue(asc_dvc, &asc_scsi_q); + kfree(asc_scsi_q.sg_head); + err_code = asc_dvc->err_code; + } else { + ADV_DVC_VAR *adv_dvc = &boardp->dvc_var.adv_dvc_var; + ADV_SCSI_REQ_Q *adv_scsiqp; + + switch (adv_build_req(boardp, scp, &adv_scsiqp)) { + case ASC_NOERROR: + ASC_DBG(3, "adv_build_req ASC_NOERROR\n"); + break; + case ASC_BUSY: + ASC_DBG(1, "adv_build_req ASC_BUSY\n"); + /* + * The asc_stats fields 'adv_build_noreq' and + * 'adv_build_nosg' count wide board busy conditions. + * They are updated in adv_build_req and + * adv_get_sglist, respectively. + */ + return ASC_BUSY; + case ASC_ERROR: + default: + ASC_DBG(1, "adv_build_req ASC_ERROR\n"); + ASC_STATS(scp->device->host, build_error); + return ASC_ERROR; + } + + ret = AdvExeScsiQueue(adv_dvc, adv_scsiqp); + err_code = adv_dvc->err_code; + } + + switch (ret) { + case ASC_NOERROR: + ASC_STATS(scp->device->host, exe_noerror); + /* + * Increment monotonically increasing per device + * successful request counter. Wrapping doesn't matter. + */ + boardp->reqcnt[scp->device->id]++; + ASC_DBG(1, "ExeScsiQueue() ASC_NOERROR\n"); + break; + case ASC_BUSY: + ASC_STATS(scp->device->host, exe_busy); + break; + case ASC_ERROR: + scmd_printk(KERN_ERR, scp, "ExeScsiQueue() ASC_ERROR, " + "err_code 0x%x\n", err_code); + ASC_STATS(scp->device->host, exe_error); + scp->result = HOST_BYTE(DID_ERROR); + break; + default: + scmd_printk(KERN_ERR, scp, "ExeScsiQueue() unknown, " + "err_code 0x%x\n", err_code); + ASC_STATS(scp->device->host, exe_unknown); + scp->result = HOST_BYTE(DID_ERROR); + break; + } + + ASC_DBG(1, "end\n"); + return ret; +} + +/* + * advansys_queuecommand() - interrupt-driven I/O entrypoint. + * + * This function always returns 0. Command return status is saved + * in the 'scp' result field. + */ +static int +advansys_queuecommand_lck(struct scsi_cmnd *scp, void (*done)(struct scsi_cmnd *)) +{ + struct Scsi_Host *shost = scp->device->host; + int asc_res, result = 0; + + ASC_STATS(shost, queuecommand); + scp->scsi_done = done; + + asc_res = asc_execute_scsi_cmnd(scp); + + switch (asc_res) { + case ASC_NOERROR: + break; + case ASC_BUSY: + result = SCSI_MLQUEUE_HOST_BUSY; + break; + case ASC_ERROR: + default: + asc_scsi_done(scp); + break; + } + + return result; +} + +static DEF_SCSI_QCMD(advansys_queuecommand) + +static ushort AscGetEisaChipCfg(PortAddr iop_base) +{ + PortAddr eisa_cfg_iop = (PortAddr) ASC_GET_EISA_SLOT(iop_base) | + (PortAddr) (ASC_EISA_CFG_IOP_MASK); + return inpw(eisa_cfg_iop); +} + +/* + * Return the BIOS address of the adapter at the specified + * I/O port and with the specified bus type. + */ +static unsigned short AscGetChipBiosAddress(PortAddr iop_base, + unsigned short bus_type) +{ + unsigned short cfg_lsw; + unsigned short bios_addr; + + /* + * The PCI BIOS is re-located by the motherboard BIOS. Because + * of this the driver can not determine where a PCI BIOS is + * loaded and executes. + */ + if (bus_type & ASC_IS_PCI) + return 0; + + if ((bus_type & ASC_IS_EISA) != 0) { + cfg_lsw = AscGetEisaChipCfg(iop_base); + cfg_lsw &= 0x000F; + bios_addr = ASC_BIOS_MIN_ADDR + cfg_lsw * ASC_BIOS_BANK_SIZE; + return bios_addr; + } + + cfg_lsw = AscGetChipCfgLsw(iop_base); + + /* + * ISA PnP uses the top bit as the 32K BIOS flag + */ + if (bus_type == ASC_IS_ISAPNP) + cfg_lsw &= 0x7FFF; + bios_addr = ASC_BIOS_MIN_ADDR + (cfg_lsw >> 12) * ASC_BIOS_BANK_SIZE; + return bios_addr; +} + +static uchar AscSetChipScsiID(PortAddr iop_base, uchar new_host_id) +{ + ushort cfg_lsw; + + if (AscGetChipScsiID(iop_base) == new_host_id) { + return (new_host_id); + } + cfg_lsw = AscGetChipCfgLsw(iop_base); + cfg_lsw &= 0xF8FF; + cfg_lsw |= (ushort)((new_host_id & ASC_MAX_TID) << 8); + AscSetChipCfgLsw(iop_base, cfg_lsw); + return (AscGetChipScsiID(iop_base)); +} + +static unsigned char AscGetChipScsiCtrl(PortAddr iop_base) +{ + unsigned char sc; + + AscSetBank(iop_base, 1); + sc = inp(iop_base + IOP_REG_SC); + AscSetBank(iop_base, 0); + return sc; +} + +static unsigned char AscGetChipVersion(PortAddr iop_base, + unsigned short bus_type) +{ + if (bus_type & ASC_IS_EISA) { + PortAddr eisa_iop; + unsigned char revision; + eisa_iop = (PortAddr) ASC_GET_EISA_SLOT(iop_base) | + (PortAddr) ASC_EISA_REV_IOP_MASK; + revision = inp(eisa_iop); + return ASC_CHIP_MIN_VER_EISA - 1 + revision; + } + return AscGetChipVerNo(iop_base); +} + +#ifdef CONFIG_ISA +static void AscEnableIsaDma(uchar dma_channel) +{ + if (dma_channel < 4) { + outp(0x000B, (ushort)(0xC0 | dma_channel)); + outp(0x000A, dma_channel); + } else if (dma_channel < 8) { + outp(0x00D6, (ushort)(0xC0 | (dma_channel - 4))); + outp(0x00D4, (ushort)(dma_channel - 4)); + } +} +#endif /* CONFIG_ISA */ + +static int AscStopQueueExe(PortAddr iop_base) +{ + int count = 0; + + if (AscReadLramByte(iop_base, ASCV_STOP_CODE_B) == 0) { + AscWriteLramByte(iop_base, ASCV_STOP_CODE_B, + ASC_STOP_REQ_RISC_STOP); + do { + if (AscReadLramByte(iop_base, ASCV_STOP_CODE_B) & + ASC_STOP_ACK_RISC_STOP) { + return (1); + } + mdelay(100); + } while (count++ < 20); + } + return (0); +} + +static ASC_DCNT AscGetMaxDmaCount(ushort bus_type) +{ + if (bus_type & ASC_IS_ISA) + return ASC_MAX_ISA_DMA_COUNT; + else if (bus_type & (ASC_IS_EISA | ASC_IS_VL)) + return ASC_MAX_VL_DMA_COUNT; + return ASC_MAX_PCI_DMA_COUNT; +} + +#ifdef CONFIG_ISA +static ushort AscGetIsaDmaChannel(PortAddr iop_base) +{ + ushort channel; + + channel = AscGetChipCfgLsw(iop_base) & 0x0003; + if (channel == 0x03) + return (0); + else if (channel == 0x00) + return (7); + return (channel + 4); +} + +static ushort AscSetIsaDmaChannel(PortAddr iop_base, ushort dma_channel) +{ + ushort cfg_lsw; + uchar value; + + if ((dma_channel >= 5) && (dma_channel <= 7)) { + if (dma_channel == 7) + value = 0x00; + else + value = dma_channel - 4; + cfg_lsw = AscGetChipCfgLsw(iop_base) & 0xFFFC; + cfg_lsw |= value; + AscSetChipCfgLsw(iop_base, cfg_lsw); + return (AscGetIsaDmaChannel(iop_base)); + } + return 0; +} + +static uchar AscGetIsaDmaSpeed(PortAddr iop_base) +{ + uchar speed_value; + + AscSetBank(iop_base, 1); + speed_value = AscReadChipDmaSpeed(iop_base); + speed_value &= 0x07; + AscSetBank(iop_base, 0); + return speed_value; +} + +static uchar AscSetIsaDmaSpeed(PortAddr iop_base, uchar speed_value) +{ + speed_value &= 0x07; + AscSetBank(iop_base, 1); + AscWriteChipDmaSpeed(iop_base, speed_value); + AscSetBank(iop_base, 0); + return AscGetIsaDmaSpeed(iop_base); +} +#endif /* CONFIG_ISA */ + +static ushort AscInitAscDvcVar(ASC_DVC_VAR *asc_dvc) +{ + int i; + PortAddr iop_base; + ushort warn_code; + uchar chip_version; + + iop_base = asc_dvc->iop_base; + warn_code = 0; + asc_dvc->err_code = 0; + if ((asc_dvc->bus_type & + (ASC_IS_ISA | ASC_IS_PCI | ASC_IS_EISA | ASC_IS_VL)) == 0) { + asc_dvc->err_code |= ASC_IERR_NO_BUS_TYPE; + } + AscSetChipControl(iop_base, CC_HALT); + AscSetChipStatus(iop_base, 0); + asc_dvc->bug_fix_cntl = 0; + asc_dvc->pci_fix_asyn_xfer = 0; + asc_dvc->pci_fix_asyn_xfer_always = 0; + /* asc_dvc->init_state initialized in AscInitGetConfig(). */ + asc_dvc->sdtr_done = 0; + asc_dvc->cur_total_qng = 0; + asc_dvc->is_in_int = 0; + asc_dvc->in_critical_cnt = 0; + asc_dvc->last_q_shortage = 0; + asc_dvc->use_tagged_qng = 0; + asc_dvc->no_scam = 0; + asc_dvc->unit_not_ready = 0; + asc_dvc->queue_full_or_busy = 0; + asc_dvc->redo_scam = 0; + asc_dvc->res2 = 0; + asc_dvc->min_sdtr_index = 0; + asc_dvc->cfg->can_tagged_qng = 0; + asc_dvc->cfg->cmd_qng_enabled = 0; + asc_dvc->dvc_cntl = ASC_DEF_DVC_CNTL; + asc_dvc->init_sdtr = 0; + asc_dvc->max_total_qng = ASC_DEF_MAX_TOTAL_QNG; + asc_dvc->scsi_reset_wait = 3; + asc_dvc->start_motor = ASC_SCSI_WIDTH_BIT_SET; + asc_dvc->max_dma_count = AscGetMaxDmaCount(asc_dvc->bus_type); + asc_dvc->cfg->sdtr_enable = ASC_SCSI_WIDTH_BIT_SET; + asc_dvc->cfg->disc_enable = ASC_SCSI_WIDTH_BIT_SET; + asc_dvc->cfg->chip_scsi_id = ASC_DEF_CHIP_SCSI_ID; + chip_version = AscGetChipVersion(iop_base, asc_dvc->bus_type); + asc_dvc->cfg->chip_version = chip_version; + asc_dvc->sdtr_period_tbl = asc_syn_xfer_period; + asc_dvc->max_sdtr_index = 7; + if ((asc_dvc->bus_type & ASC_IS_PCI) && + (chip_version >= ASC_CHIP_VER_PCI_ULTRA_3150)) { + asc_dvc->bus_type = ASC_IS_PCI_ULTRA; + asc_dvc->sdtr_period_tbl = asc_syn_ultra_xfer_period; + asc_dvc->max_sdtr_index = 15; + if (chip_version == ASC_CHIP_VER_PCI_ULTRA_3150) { + AscSetExtraControl(iop_base, + (SEC_ACTIVE_NEGATE | SEC_SLEW_RATE)); + } else if (chip_version >= ASC_CHIP_VER_PCI_ULTRA_3050) { + AscSetExtraControl(iop_base, + (SEC_ACTIVE_NEGATE | + SEC_ENABLE_FILTER)); + } + } + if (asc_dvc->bus_type == ASC_IS_PCI) { + AscSetExtraControl(iop_base, + (SEC_ACTIVE_NEGATE | SEC_SLEW_RATE)); + } + + asc_dvc->cfg->isa_dma_speed = ASC_DEF_ISA_DMA_SPEED; +#ifdef CONFIG_ISA + if ((asc_dvc->bus_type & ASC_IS_ISA) != 0) { + if (chip_version >= ASC_CHIP_MIN_VER_ISA_PNP) { + AscSetChipIFC(iop_base, IFC_INIT_DEFAULT); + asc_dvc->bus_type = ASC_IS_ISAPNP; + } + asc_dvc->cfg->isa_dma_channel = + (uchar)AscGetIsaDmaChannel(iop_base); + } +#endif /* CONFIG_ISA */ + for (i = 0; i <= ASC_MAX_TID; i++) { + asc_dvc->cur_dvc_qng[i] = 0; + asc_dvc->max_dvc_qng[i] = ASC_MAX_SCSI1_QNG; + asc_dvc->scsiq_busy_head[i] = (ASC_SCSI_Q *)0L; + asc_dvc->scsiq_busy_tail[i] = (ASC_SCSI_Q *)0L; + asc_dvc->cfg->max_tag_qng[i] = ASC_MAX_INRAM_TAG_QNG; + } + return warn_code; +} + +static int AscWriteEEPCmdReg(PortAddr iop_base, uchar cmd_reg) +{ + int retry; + + for (retry = 0; retry < ASC_EEP_MAX_RETRY; retry++) { + unsigned char read_back; + AscSetChipEEPCmd(iop_base, cmd_reg); + mdelay(1); + read_back = AscGetChipEEPCmd(iop_base); + if (read_back == cmd_reg) + return 1; + } + return 0; +} + +static void AscWaitEEPRead(void) +{ + mdelay(1); +} + +static ushort AscReadEEPWord(PortAddr iop_base, uchar addr) +{ + ushort read_wval; + uchar cmd_reg; + + AscWriteEEPCmdReg(iop_base, ASC_EEP_CMD_WRITE_DISABLE); + AscWaitEEPRead(); + cmd_reg = addr | ASC_EEP_CMD_READ; + AscWriteEEPCmdReg(iop_base, cmd_reg); + AscWaitEEPRead(); + read_wval = AscGetChipEEPData(iop_base); + AscWaitEEPRead(); + return read_wval; +} + +static ushort AscGetEEPConfig(PortAddr iop_base, ASCEEP_CONFIG *cfg_buf, + ushort bus_type) +{ + ushort wval; + ushort sum; + ushort *wbuf; + int cfg_beg; + int cfg_end; + int uchar_end_in_config = ASC_EEP_MAX_DVC_ADDR - 2; + int s_addr; + + wbuf = (ushort *)cfg_buf; + sum = 0; + /* Read two config words; Byte-swapping done by AscReadEEPWord(). */ + for (s_addr = 0; s_addr < 2; s_addr++, wbuf++) { + *wbuf = AscReadEEPWord(iop_base, (uchar)s_addr); + sum += *wbuf; + } + if (bus_type & ASC_IS_VL) { + cfg_beg = ASC_EEP_DVC_CFG_BEG_VL; + cfg_end = ASC_EEP_MAX_DVC_ADDR_VL; + } else { + cfg_beg = ASC_EEP_DVC_CFG_BEG; + cfg_end = ASC_EEP_MAX_DVC_ADDR; + } + for (s_addr = cfg_beg; s_addr <= (cfg_end - 1); s_addr++, wbuf++) { + wval = AscReadEEPWord(iop_base, (uchar)s_addr); + if (s_addr <= uchar_end_in_config) { + /* + * Swap all char fields - must unswap bytes already swapped + * by AscReadEEPWord(). + */ + *wbuf = le16_to_cpu(wval); + } else { + /* Don't swap word field at the end - cntl field. */ + *wbuf = wval; + } + sum += wval; /* Checksum treats all EEPROM data as words. */ + } + /* + * Read the checksum word which will be compared against 'sum' + * by the caller. Word field already swapped. + */ + *wbuf = AscReadEEPWord(iop_base, (uchar)s_addr); + return sum; +} + +static int AscTestExternalLram(ASC_DVC_VAR *asc_dvc) +{ + PortAddr iop_base; + ushort q_addr; + ushort saved_word; + int sta; + + iop_base = asc_dvc->iop_base; + sta = 0; + q_addr = ASC_QNO_TO_QADDR(241); + saved_word = AscReadLramWord(iop_base, q_addr); + AscSetChipLramAddr(iop_base, q_addr); + AscSetChipLramData(iop_base, 0x55AA); + mdelay(10); + AscSetChipLramAddr(iop_base, q_addr); + if (AscGetChipLramData(iop_base) == 0x55AA) { + sta = 1; + AscWriteLramWord(iop_base, q_addr, saved_word); + } + return (sta); +} + +static void AscWaitEEPWrite(void) +{ + mdelay(20); +} + +static int AscWriteEEPDataReg(PortAddr iop_base, ushort data_reg) +{ + ushort read_back; + int retry; + + retry = 0; + while (TRUE) { + AscSetChipEEPData(iop_base, data_reg); + mdelay(1); + read_back = AscGetChipEEPData(iop_base); + if (read_back == data_reg) { + return (1); + } + if (retry++ > ASC_EEP_MAX_RETRY) { + return (0); + } + } +} + +static ushort AscWriteEEPWord(PortAddr iop_base, uchar addr, ushort word_val) +{ + ushort read_wval; + + read_wval = AscReadEEPWord(iop_base, addr); + if (read_wval != word_val) { + AscWriteEEPCmdReg(iop_base, ASC_EEP_CMD_WRITE_ABLE); + AscWaitEEPRead(); + AscWriteEEPDataReg(iop_base, word_val); + AscWaitEEPRead(); + AscWriteEEPCmdReg(iop_base, + (uchar)((uchar)ASC_EEP_CMD_WRITE | addr)); + AscWaitEEPWrite(); + AscWriteEEPCmdReg(iop_base, ASC_EEP_CMD_WRITE_DISABLE); + AscWaitEEPRead(); + return (AscReadEEPWord(iop_base, addr)); + } + return (read_wval); +} + +static int AscSetEEPConfigOnce(PortAddr iop_base, ASCEEP_CONFIG *cfg_buf, + ushort bus_type) +{ + int n_error; + ushort *wbuf; + ushort word; + ushort sum; + int s_addr; + int cfg_beg; + int cfg_end; + int uchar_end_in_config = ASC_EEP_MAX_DVC_ADDR - 2; + + wbuf = (ushort *)cfg_buf; + n_error = 0; + sum = 0; + /* Write two config words; AscWriteEEPWord() will swap bytes. */ + for (s_addr = 0; s_addr < 2; s_addr++, wbuf++) { + sum += *wbuf; + if (*wbuf != AscWriteEEPWord(iop_base, (uchar)s_addr, *wbuf)) { + n_error++; + } + } + if (bus_type & ASC_IS_VL) { + cfg_beg = ASC_EEP_DVC_CFG_BEG_VL; + cfg_end = ASC_EEP_MAX_DVC_ADDR_VL; + } else { + cfg_beg = ASC_EEP_DVC_CFG_BEG; + cfg_end = ASC_EEP_MAX_DVC_ADDR; + } + for (s_addr = cfg_beg; s_addr <= (cfg_end - 1); s_addr++, wbuf++) { + if (s_addr <= uchar_end_in_config) { + /* + * This is a char field. Swap char fields before they are + * swapped again by AscWriteEEPWord(). + */ + word = cpu_to_le16(*wbuf); + if (word != + AscWriteEEPWord(iop_base, (uchar)s_addr, word)) { + n_error++; + } + } else { + /* Don't swap word field at the end - cntl field. */ + if (*wbuf != + AscWriteEEPWord(iop_base, (uchar)s_addr, *wbuf)) { + n_error++; + } + } + sum += *wbuf; /* Checksum calculated from word values. */ + } + /* Write checksum word. It will be swapped by AscWriteEEPWord(). */ + *wbuf = sum; + if (sum != AscWriteEEPWord(iop_base, (uchar)s_addr, sum)) { + n_error++; + } + + /* Read EEPROM back again. */ + wbuf = (ushort *)cfg_buf; + /* + * Read two config words; Byte-swapping done by AscReadEEPWord(). + */ + for (s_addr = 0; s_addr < 2; s_addr++, wbuf++) { + if (*wbuf != AscReadEEPWord(iop_base, (uchar)s_addr)) { + n_error++; + } + } + if (bus_type & ASC_IS_VL) { + cfg_beg = ASC_EEP_DVC_CFG_BEG_VL; + cfg_end = ASC_EEP_MAX_DVC_ADDR_VL; + } else { + cfg_beg = ASC_EEP_DVC_CFG_BEG; + cfg_end = ASC_EEP_MAX_DVC_ADDR; + } + for (s_addr = cfg_beg; s_addr <= (cfg_end - 1); s_addr++, wbuf++) { + if (s_addr <= uchar_end_in_config) { + /* + * Swap all char fields. Must unswap bytes already swapped + * by AscReadEEPWord(). + */ + word = + le16_to_cpu(AscReadEEPWord + (iop_base, (uchar)s_addr)); + } else { + /* Don't swap word field at the end - cntl field. */ + word = AscReadEEPWord(iop_base, (uchar)s_addr); + } + if (*wbuf != word) { + n_error++; + } + } + /* Read checksum; Byte swapping not needed. */ + if (AscReadEEPWord(iop_base, (uchar)s_addr) != sum) { + n_error++; + } + return n_error; +} + +static int AscSetEEPConfig(PortAddr iop_base, ASCEEP_CONFIG *cfg_buf, + ushort bus_type) +{ + int retry; + int n_error; + + retry = 0; + while (TRUE) { + if ((n_error = AscSetEEPConfigOnce(iop_base, cfg_buf, + bus_type)) == 0) { + break; + } + if (++retry > ASC_EEP_MAX_RETRY) { + break; + } + } + return n_error; +} + +static ushort AscInitFromEEP(ASC_DVC_VAR *asc_dvc) +{ + ASCEEP_CONFIG eep_config_buf; + ASCEEP_CONFIG *eep_config; + PortAddr iop_base; + ushort chksum; + ushort warn_code; + ushort cfg_msw, cfg_lsw; + int i; + int write_eep = 0; + + iop_base = asc_dvc->iop_base; + warn_code = 0; + AscWriteLramWord(iop_base, ASCV_HALTCODE_W, 0x00FE); + AscStopQueueExe(iop_base); + if ((AscStopChip(iop_base) == FALSE) || + (AscGetChipScsiCtrl(iop_base) != 0)) { + asc_dvc->init_state |= ASC_INIT_RESET_SCSI_DONE; + AscResetChipAndScsiBus(asc_dvc); + mdelay(asc_dvc->scsi_reset_wait * 1000); /* XXX: msleep? */ + } + if (AscIsChipHalted(iop_base) == FALSE) { + asc_dvc->err_code |= ASC_IERR_START_STOP_CHIP; + return (warn_code); + } + AscSetPCAddr(iop_base, ASC_MCODE_START_ADDR); + if (AscGetPCAddr(iop_base) != ASC_MCODE_START_ADDR) { + asc_dvc->err_code |= ASC_IERR_SET_PC_ADDR; + return (warn_code); + } + eep_config = (ASCEEP_CONFIG *)&eep_config_buf; + cfg_msw = AscGetChipCfgMsw(iop_base); + cfg_lsw = AscGetChipCfgLsw(iop_base); + if ((cfg_msw & ASC_CFG_MSW_CLR_MASK) != 0) { + cfg_msw &= ~ASC_CFG_MSW_CLR_MASK; + warn_code |= ASC_WARN_CFG_MSW_RECOVER; + AscSetChipCfgMsw(iop_base, cfg_msw); + } + chksum = AscGetEEPConfig(iop_base, eep_config, asc_dvc->bus_type); + ASC_DBG(1, "chksum 0x%x\n", chksum); + if (chksum == 0) { + chksum = 0xaa55; + } + if (AscGetChipStatus(iop_base) & CSW_AUTO_CONFIG) { + warn_code |= ASC_WARN_AUTO_CONFIG; + if (asc_dvc->cfg->chip_version == 3) { + if (eep_config->cfg_lsw != cfg_lsw) { + warn_code |= ASC_WARN_EEPROM_RECOVER; + eep_config->cfg_lsw = + AscGetChipCfgLsw(iop_base); + } + if (eep_config->cfg_msw != cfg_msw) { + warn_code |= ASC_WARN_EEPROM_RECOVER; + eep_config->cfg_msw = + AscGetChipCfgMsw(iop_base); + } + } + } + eep_config->cfg_msw &= ~ASC_CFG_MSW_CLR_MASK; + eep_config->cfg_lsw |= ASC_CFG0_HOST_INT_ON; + ASC_DBG(1, "eep_config->chksum 0x%x\n", eep_config->chksum); + if (chksum != eep_config->chksum) { + if (AscGetChipVersion(iop_base, asc_dvc->bus_type) == + ASC_CHIP_VER_PCI_ULTRA_3050) { + ASC_DBG(1, "chksum error ignored; EEPROM-less board\n"); + eep_config->init_sdtr = 0xFF; + eep_config->disc_enable = 0xFF; + eep_config->start_motor = 0xFF; + eep_config->use_cmd_qng = 0; + eep_config->max_total_qng = 0xF0; + eep_config->max_tag_qng = 0x20; + eep_config->cntl = 0xBFFF; + ASC_EEP_SET_CHIP_ID(eep_config, 7); + eep_config->no_scam = 0; + eep_config->adapter_info[0] = 0; + eep_config->adapter_info[1] = 0; + eep_config->adapter_info[2] = 0; + eep_config->adapter_info[3] = 0; + eep_config->adapter_info[4] = 0; + /* Indicate EEPROM-less board. */ + eep_config->adapter_info[5] = 0xBB; + } else { + ASC_PRINT + ("AscInitFromEEP: EEPROM checksum error; Will try to re-write EEPROM.\n"); + write_eep = 1; + warn_code |= ASC_WARN_EEPROM_CHKSUM; + } + } + asc_dvc->cfg->sdtr_enable = eep_config->init_sdtr; + asc_dvc->cfg->disc_enable = eep_config->disc_enable; + asc_dvc->cfg->cmd_qng_enabled = eep_config->use_cmd_qng; + asc_dvc->cfg->isa_dma_speed = ASC_EEP_GET_DMA_SPD(eep_config); + asc_dvc->start_motor = eep_config->start_motor; + asc_dvc->dvc_cntl = eep_config->cntl; + asc_dvc->no_scam = eep_config->no_scam; + asc_dvc->cfg->adapter_info[0] = eep_config->adapter_info[0]; + asc_dvc->cfg->adapter_info[1] = eep_config->adapter_info[1]; + asc_dvc->cfg->adapter_info[2] = eep_config->adapter_info[2]; + asc_dvc->cfg->adapter_info[3] = eep_config->adapter_info[3]; + asc_dvc->cfg->adapter_info[4] = eep_config->adapter_info[4]; + asc_dvc->cfg->adapter_info[5] = eep_config->adapter_info[5]; + if (!AscTestExternalLram(asc_dvc)) { + if (((asc_dvc->bus_type & ASC_IS_PCI_ULTRA) == + ASC_IS_PCI_ULTRA)) { + eep_config->max_total_qng = + ASC_MAX_PCI_ULTRA_INRAM_TOTAL_QNG; + eep_config->max_tag_qng = + ASC_MAX_PCI_ULTRA_INRAM_TAG_QNG; + } else { + eep_config->cfg_msw |= 0x0800; + cfg_msw |= 0x0800; + AscSetChipCfgMsw(iop_base, cfg_msw); + eep_config->max_total_qng = ASC_MAX_PCI_INRAM_TOTAL_QNG; + eep_config->max_tag_qng = ASC_MAX_INRAM_TAG_QNG; + } + } else { + } + if (eep_config->max_total_qng < ASC_MIN_TOTAL_QNG) { + eep_config->max_total_qng = ASC_MIN_TOTAL_QNG; + } + if (eep_config->max_total_qng > ASC_MAX_TOTAL_QNG) { + eep_config->max_total_qng = ASC_MAX_TOTAL_QNG; + } + if (eep_config->max_tag_qng > eep_config->max_total_qng) { + eep_config->max_tag_qng = eep_config->max_total_qng; + } + if (eep_config->max_tag_qng < ASC_MIN_TAG_Q_PER_DVC) { + eep_config->max_tag_qng = ASC_MIN_TAG_Q_PER_DVC; + } + asc_dvc->max_total_qng = eep_config->max_total_qng; + if ((eep_config->use_cmd_qng & eep_config->disc_enable) != + eep_config->use_cmd_qng) { + eep_config->disc_enable = eep_config->use_cmd_qng; + warn_code |= ASC_WARN_CMD_QNG_CONFLICT; + } + ASC_EEP_SET_CHIP_ID(eep_config, + ASC_EEP_GET_CHIP_ID(eep_config) & ASC_MAX_TID); + asc_dvc->cfg->chip_scsi_id = ASC_EEP_GET_CHIP_ID(eep_config); + if (((asc_dvc->bus_type & ASC_IS_PCI_ULTRA) == ASC_IS_PCI_ULTRA) && + !(asc_dvc->dvc_cntl & ASC_CNTL_SDTR_ENABLE_ULTRA)) { + asc_dvc->min_sdtr_index = ASC_SDTR_ULTRA_PCI_10MB_INDEX; + } + + for (i = 0; i <= ASC_MAX_TID; i++) { + asc_dvc->dos_int13_table[i] = eep_config->dos_int13_table[i]; + asc_dvc->cfg->max_tag_qng[i] = eep_config->max_tag_qng; + asc_dvc->cfg->sdtr_period_offset[i] = + (uchar)(ASC_DEF_SDTR_OFFSET | + (asc_dvc->min_sdtr_index << 4)); + } + eep_config->cfg_msw = AscGetChipCfgMsw(iop_base); + if (write_eep) { + if ((i = AscSetEEPConfig(iop_base, eep_config, + asc_dvc->bus_type)) != 0) { + ASC_PRINT1 + ("AscInitFromEEP: Failed to re-write EEPROM with %d errors.\n", + i); + } else { + ASC_PRINT + ("AscInitFromEEP: Successfully re-wrote EEPROM.\n"); + } + } + return (warn_code); +} + +static int AscInitGetConfig(struct Scsi_Host *shost) +{ + struct asc_board *board = shost_priv(shost); + ASC_DVC_VAR *asc_dvc = &board->dvc_var.asc_dvc_var; + unsigned short warn_code = 0; + + asc_dvc->init_state = ASC_INIT_STATE_BEG_GET_CFG; + if (asc_dvc->err_code != 0) + return asc_dvc->err_code; + + if (AscFindSignature(asc_dvc->iop_base)) { + warn_code |= AscInitAscDvcVar(asc_dvc); + warn_code |= AscInitFromEEP(asc_dvc); + asc_dvc->init_state |= ASC_INIT_STATE_END_GET_CFG; + if (asc_dvc->scsi_reset_wait > ASC_MAX_SCSI_RESET_WAIT) + asc_dvc->scsi_reset_wait = ASC_MAX_SCSI_RESET_WAIT; + } else { + asc_dvc->err_code = ASC_IERR_BAD_SIGNATURE; + } + + switch (warn_code) { + case 0: /* No error */ + break; + case ASC_WARN_IO_PORT_ROTATE: + shost_printk(KERN_WARNING, shost, "I/O port address " + "modified\n"); + break; + case ASC_WARN_AUTO_CONFIG: + shost_printk(KERN_WARNING, shost, "I/O port increment switch " + "enabled\n"); + break; + case ASC_WARN_EEPROM_CHKSUM: + shost_printk(KERN_WARNING, shost, "EEPROM checksum error\n"); + break; + case ASC_WARN_IRQ_MODIFIED: + shost_printk(KERN_WARNING, shost, "IRQ modified\n"); + break; + case ASC_WARN_CMD_QNG_CONFLICT: + shost_printk(KERN_WARNING, shost, "tag queuing enabled w/o " + "disconnects\n"); + break; + default: + shost_printk(KERN_WARNING, shost, "unknown warning: 0x%x\n", + warn_code); + break; + } + + if (asc_dvc->err_code != 0) + shost_printk(KERN_ERR, shost, "error 0x%x at init_state " + "0x%x\n", asc_dvc->err_code, asc_dvc->init_state); + + return asc_dvc->err_code; +} + +static int AscInitSetConfig(struct pci_dev *pdev, struct Scsi_Host *shost) +{ + struct asc_board *board = shost_priv(shost); + ASC_DVC_VAR *asc_dvc = &board->dvc_var.asc_dvc_var; + PortAddr iop_base = asc_dvc->iop_base; + unsigned short cfg_msw; + unsigned short warn_code = 0; + + asc_dvc->init_state |= ASC_INIT_STATE_BEG_SET_CFG; + if (asc_dvc->err_code != 0) + return asc_dvc->err_code; + if (!AscFindSignature(asc_dvc->iop_base)) { + asc_dvc->err_code = ASC_IERR_BAD_SIGNATURE; + return asc_dvc->err_code; + } + + cfg_msw = AscGetChipCfgMsw(iop_base); + if ((cfg_msw & ASC_CFG_MSW_CLR_MASK) != 0) { + cfg_msw &= ~ASC_CFG_MSW_CLR_MASK; + warn_code |= ASC_WARN_CFG_MSW_RECOVER; + AscSetChipCfgMsw(iop_base, cfg_msw); + } + if ((asc_dvc->cfg->cmd_qng_enabled & asc_dvc->cfg->disc_enable) != + asc_dvc->cfg->cmd_qng_enabled) { + asc_dvc->cfg->disc_enable = asc_dvc->cfg->cmd_qng_enabled; + warn_code |= ASC_WARN_CMD_QNG_CONFLICT; + } + if (AscGetChipStatus(iop_base) & CSW_AUTO_CONFIG) { + warn_code |= ASC_WARN_AUTO_CONFIG; + } +#ifdef CONFIG_PCI + if (asc_dvc->bus_type & ASC_IS_PCI) { + cfg_msw &= 0xFFC0; + AscSetChipCfgMsw(iop_base, cfg_msw); + if ((asc_dvc->bus_type & ASC_IS_PCI_ULTRA) == ASC_IS_PCI_ULTRA) { + } else { + if ((pdev->device == PCI_DEVICE_ID_ASP_1200A) || + (pdev->device == PCI_DEVICE_ID_ASP_ABP940)) { + asc_dvc->bug_fix_cntl |= ASC_BUG_FIX_IF_NOT_DWB; + asc_dvc->bug_fix_cntl |= + ASC_BUG_FIX_ASYN_USE_SYN; + } + } + } else +#endif /* CONFIG_PCI */ + if (asc_dvc->bus_type == ASC_IS_ISAPNP) { + if (AscGetChipVersion(iop_base, asc_dvc->bus_type) + == ASC_CHIP_VER_ASYN_BUG) { + asc_dvc->bug_fix_cntl |= ASC_BUG_FIX_ASYN_USE_SYN; + } + } + if (AscSetChipScsiID(iop_base, asc_dvc->cfg->chip_scsi_id) != + asc_dvc->cfg->chip_scsi_id) { + asc_dvc->err_code |= ASC_IERR_SET_SCSI_ID; + } +#ifdef CONFIG_ISA + if (asc_dvc->bus_type & ASC_IS_ISA) { + AscSetIsaDmaChannel(iop_base, asc_dvc->cfg->isa_dma_channel); + AscSetIsaDmaSpeed(iop_base, asc_dvc->cfg->isa_dma_speed); + } +#endif /* CONFIG_ISA */ + + asc_dvc->init_state |= ASC_INIT_STATE_END_SET_CFG; + + switch (warn_code) { + case 0: /* No error. */ + break; + case ASC_WARN_IO_PORT_ROTATE: + shost_printk(KERN_WARNING, shost, "I/O port address " + "modified\n"); + break; + case ASC_WARN_AUTO_CONFIG: + shost_printk(KERN_WARNING, shost, "I/O port increment switch " + "enabled\n"); + break; + case ASC_WARN_EEPROM_CHKSUM: + shost_printk(KERN_WARNING, shost, "EEPROM checksum error\n"); + break; + case ASC_WARN_IRQ_MODIFIED: + shost_printk(KERN_WARNING, shost, "IRQ modified\n"); + break; + case ASC_WARN_CMD_QNG_CONFLICT: + shost_printk(KERN_WARNING, shost, "tag queuing w/o " + "disconnects\n"); + break; + default: + shost_printk(KERN_WARNING, shost, "unknown warning: 0x%x\n", + warn_code); + break; + } + + if (asc_dvc->err_code != 0) + shost_printk(KERN_ERR, shost, "error 0x%x at init_state " + "0x%x\n", asc_dvc->err_code, asc_dvc->init_state); + + return asc_dvc->err_code; +} + +/* + * EEPROM Configuration. + * + * All drivers should use this structure to set the default EEPROM + * configuration. The BIOS now uses this structure when it is built. + * Additional structure information can be found in a_condor.h where + * the structure is defined. + * + * The *_Field_IsChar structs are needed to correct for endianness. + * These values are read from the board 16 bits at a time directly + * into the structs. Because some fields are char, the values will be + * in the wrong order. The *_Field_IsChar tells when to flip the + * bytes. Data read and written to PCI memory is automatically swapped + * on big-endian platforms so char fields read as words are actually being + * unswapped on big-endian platforms. + */ +static ADVEEP_3550_CONFIG Default_3550_EEPROM_Config = { + ADV_EEPROM_BIOS_ENABLE, /* cfg_lsw */ + 0x0000, /* cfg_msw */ + 0xFFFF, /* disc_enable */ + 0xFFFF, /* wdtr_able */ + 0xFFFF, /* sdtr_able */ + 0xFFFF, /* start_motor */ + 0xFFFF, /* tagqng_able */ + 0xFFFF, /* bios_scan */ + 0, /* scam_tolerant */ + 7, /* adapter_scsi_id */ + 0, /* bios_boot_delay */ + 3, /* scsi_reset_delay */ + 0, /* bios_id_lun */ + 0, /* termination */ + 0, /* reserved1 */ + 0xFFE7, /* bios_ctrl */ + 0xFFFF, /* ultra_able */ + 0, /* reserved2 */ + ASC_DEF_MAX_HOST_QNG, /* max_host_qng */ + ASC_DEF_MAX_DVC_QNG, /* max_dvc_qng */ + 0, /* dvc_cntl */ + 0, /* bug_fix */ + 0, /* serial_number_word1 */ + 0, /* serial_number_word2 */ + 0, /* serial_number_word3 */ + 0, /* check_sum */ + {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} + , /* oem_name[16] */ + 0, /* dvc_err_code */ + 0, /* adv_err_code */ + 0, /* adv_err_addr */ + 0, /* saved_dvc_err_code */ + 0, /* saved_adv_err_code */ + 0, /* saved_adv_err_addr */ + 0 /* num_of_err */ +}; + +static ADVEEP_3550_CONFIG ADVEEP_3550_Config_Field_IsChar = { + 0, /* cfg_lsw */ + 0, /* cfg_msw */ + 0, /* -disc_enable */ + 0, /* wdtr_able */ + 0, /* sdtr_able */ + 0, /* start_motor */ + 0, /* tagqng_able */ + 0, /* bios_scan */ + 0, /* scam_tolerant */ + 1, /* adapter_scsi_id */ + 1, /* bios_boot_delay */ + 1, /* scsi_reset_delay */ + 1, /* bios_id_lun */ + 1, /* termination */ + 1, /* reserved1 */ + 0, /* bios_ctrl */ + 0, /* ultra_able */ + 0, /* reserved2 */ + 1, /* max_host_qng */ + 1, /* max_dvc_qng */ + 0, /* dvc_cntl */ + 0, /* bug_fix */ + 0, /* serial_number_word1 */ + 0, /* serial_number_word2 */ + 0, /* serial_number_word3 */ + 0, /* check_sum */ + {1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1} + , /* oem_name[16] */ + 0, /* dvc_err_code */ + 0, /* adv_err_code */ + 0, /* adv_err_addr */ + 0, /* saved_dvc_err_code */ + 0, /* saved_adv_err_code */ + 0, /* saved_adv_err_addr */ + 0 /* num_of_err */ +}; + +static ADVEEP_38C0800_CONFIG Default_38C0800_EEPROM_Config = { + ADV_EEPROM_BIOS_ENABLE, /* 00 cfg_lsw */ + 0x0000, /* 01 cfg_msw */ + 0xFFFF, /* 02 disc_enable */ + 0xFFFF, /* 03 wdtr_able */ + 0x4444, /* 04 sdtr_speed1 */ + 0xFFFF, /* 05 start_motor */ + 0xFFFF, /* 06 tagqng_able */ + 0xFFFF, /* 07 bios_scan */ + 0, /* 08 scam_tolerant */ + 7, /* 09 adapter_scsi_id */ + 0, /* bios_boot_delay */ + 3, /* 10 scsi_reset_delay */ + 0, /* bios_id_lun */ + 0, /* 11 termination_se */ + 0, /* termination_lvd */ + 0xFFE7, /* 12 bios_ctrl */ + 0x4444, /* 13 sdtr_speed2 */ + 0x4444, /* 14 sdtr_speed3 */ + ASC_DEF_MAX_HOST_QNG, /* 15 max_host_qng */ + ASC_DEF_MAX_DVC_QNG, /* max_dvc_qng */ + 0, /* 16 dvc_cntl */ + 0x4444, /* 17 sdtr_speed4 */ + 0, /* 18 serial_number_word1 */ + 0, /* 19 serial_number_word2 */ + 0, /* 20 serial_number_word3 */ + 0, /* 21 check_sum */ + {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} + , /* 22-29 oem_name[16] */ + 0, /* 30 dvc_err_code */ + 0, /* 31 adv_err_code */ + 0, /* 32 adv_err_addr */ + 0, /* 33 saved_dvc_err_code */ + 0, /* 34 saved_adv_err_code */ + 0, /* 35 saved_adv_err_addr */ + 0, /* 36 reserved */ + 0, /* 37 reserved */ + 0, /* 38 reserved */ + 0, /* 39 reserved */ + 0, /* 40 reserved */ + 0, /* 41 reserved */ + 0, /* 42 reserved */ + 0, /* 43 reserved */ + 0, /* 44 reserved */ + 0, /* 45 reserved */ + 0, /* 46 reserved */ + 0, /* 47 reserved */ + 0, /* 48 reserved */ + 0, /* 49 reserved */ + 0, /* 50 reserved */ + 0, /* 51 reserved */ + 0, /* 52 reserved */ + 0, /* 53 reserved */ + 0, /* 54 reserved */ + 0, /* 55 reserved */ + 0, /* 56 cisptr_lsw */ + 0, /* 57 cisprt_msw */ + PCI_VENDOR_ID_ASP, /* 58 subsysvid */ + PCI_DEVICE_ID_38C0800_REV1, /* 59 subsysid */ + 0, /* 60 reserved */ + 0, /* 61 reserved */ + 0, /* 62 reserved */ + 0 /* 63 reserved */ +}; + +static ADVEEP_38C0800_CONFIG ADVEEP_38C0800_Config_Field_IsChar = { + 0, /* 00 cfg_lsw */ + 0, /* 01 cfg_msw */ + 0, /* 02 disc_enable */ + 0, /* 03 wdtr_able */ + 0, /* 04 sdtr_speed1 */ + 0, /* 05 start_motor */ + 0, /* 06 tagqng_able */ + 0, /* 07 bios_scan */ + 0, /* 08 scam_tolerant */ + 1, /* 09 adapter_scsi_id */ + 1, /* bios_boot_delay */ + 1, /* 10 scsi_reset_delay */ + 1, /* bios_id_lun */ + 1, /* 11 termination_se */ + 1, /* termination_lvd */ + 0, /* 12 bios_ctrl */ + 0, /* 13 sdtr_speed2 */ + 0, /* 14 sdtr_speed3 */ + 1, /* 15 max_host_qng */ + 1, /* max_dvc_qng */ + 0, /* 16 dvc_cntl */ + 0, /* 17 sdtr_speed4 */ + 0, /* 18 serial_number_word1 */ + 0, /* 19 serial_number_word2 */ + 0, /* 20 serial_number_word3 */ + 0, /* 21 check_sum */ + {1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1} + , /* 22-29 oem_name[16] */ + 0, /* 30 dvc_err_code */ + 0, /* 31 adv_err_code */ + 0, /* 32 adv_err_addr */ + 0, /* 33 saved_dvc_err_code */ + 0, /* 34 saved_adv_err_code */ + 0, /* 35 saved_adv_err_addr */ + 0, /* 36 reserved */ + 0, /* 37 reserved */ + 0, /* 38 reserved */ + 0, /* 39 reserved */ + 0, /* 40 reserved */ + 0, /* 41 reserved */ + 0, /* 42 reserved */ + 0, /* 43 reserved */ + 0, /* 44 reserved */ + 0, /* 45 reserved */ + 0, /* 46 reserved */ + 0, /* 47 reserved */ + 0, /* 48 reserved */ + 0, /* 49 reserved */ + 0, /* 50 reserved */ + 0, /* 51 reserved */ + 0, /* 52 reserved */ + 0, /* 53 reserved */ + 0, /* 54 reserved */ + 0, /* 55 reserved */ + 0, /* 56 cisptr_lsw */ + 0, /* 57 cisprt_msw */ + 0, /* 58 subsysvid */ + 0, /* 59 subsysid */ + 0, /* 60 reserved */ + 0, /* 61 reserved */ + 0, /* 62 reserved */ + 0 /* 63 reserved */ +}; + +static ADVEEP_38C1600_CONFIG Default_38C1600_EEPROM_Config = { + ADV_EEPROM_BIOS_ENABLE, /* 00 cfg_lsw */ + 0x0000, /* 01 cfg_msw */ + 0xFFFF, /* 02 disc_enable */ + 0xFFFF, /* 03 wdtr_able */ + 0x5555, /* 04 sdtr_speed1 */ + 0xFFFF, /* 05 start_motor */ + 0xFFFF, /* 06 tagqng_able */ + 0xFFFF, /* 07 bios_scan */ + 0, /* 08 scam_tolerant */ + 7, /* 09 adapter_scsi_id */ + 0, /* bios_boot_delay */ + 3, /* 10 scsi_reset_delay */ + 0, /* bios_id_lun */ + 0, /* 11 termination_se */ + 0, /* termination_lvd */ + 0xFFE7, /* 12 bios_ctrl */ + 0x5555, /* 13 sdtr_speed2 */ + 0x5555, /* 14 sdtr_speed3 */ + ASC_DEF_MAX_HOST_QNG, /* 15 max_host_qng */ + ASC_DEF_MAX_DVC_QNG, /* max_dvc_qng */ + 0, /* 16 dvc_cntl */ + 0x5555, /* 17 sdtr_speed4 */ + 0, /* 18 serial_number_word1 */ + 0, /* 19 serial_number_word2 */ + 0, /* 20 serial_number_word3 */ + 0, /* 21 check_sum */ + {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} + , /* 22-29 oem_name[16] */ + 0, /* 30 dvc_err_code */ + 0, /* 31 adv_err_code */ + 0, /* 32 adv_err_addr */ + 0, /* 33 saved_dvc_err_code */ + 0, /* 34 saved_adv_err_code */ + 0, /* 35 saved_adv_err_addr */ + 0, /* 36 reserved */ + 0, /* 37 reserved */ + 0, /* 38 reserved */ + 0, /* 39 reserved */ + 0, /* 40 reserved */ + 0, /* 41 reserved */ + 0, /* 42 reserved */ + 0, /* 43 reserved */ + 0, /* 44 reserved */ + 0, /* 45 reserved */ + 0, /* 46 reserved */ + 0, /* 47 reserved */ + 0, /* 48 reserved */ + 0, /* 49 reserved */ + 0, /* 50 reserved */ + 0, /* 51 reserved */ + 0, /* 52 reserved */ + 0, /* 53 reserved */ + 0, /* 54 reserved */ + 0, /* 55 reserved */ + 0, /* 56 cisptr_lsw */ + 0, /* 57 cisprt_msw */ + PCI_VENDOR_ID_ASP, /* 58 subsysvid */ + PCI_DEVICE_ID_38C1600_REV1, /* 59 subsysid */ + 0, /* 60 reserved */ + 0, /* 61 reserved */ + 0, /* 62 reserved */ + 0 /* 63 reserved */ +}; + +static ADVEEP_38C1600_CONFIG ADVEEP_38C1600_Config_Field_IsChar = { + 0, /* 00 cfg_lsw */ + 0, /* 01 cfg_msw */ + 0, /* 02 disc_enable */ + 0, /* 03 wdtr_able */ + 0, /* 04 sdtr_speed1 */ + 0, /* 05 start_motor */ + 0, /* 06 tagqng_able */ + 0, /* 07 bios_scan */ + 0, /* 08 scam_tolerant */ + 1, /* 09 adapter_scsi_id */ + 1, /* bios_boot_delay */ + 1, /* 10 scsi_reset_delay */ + 1, /* bios_id_lun */ + 1, /* 11 termination_se */ + 1, /* termination_lvd */ + 0, /* 12 bios_ctrl */ + 0, /* 13 sdtr_speed2 */ + 0, /* 14 sdtr_speed3 */ + 1, /* 15 max_host_qng */ + 1, /* max_dvc_qng */ + 0, /* 16 dvc_cntl */ + 0, /* 17 sdtr_speed4 */ + 0, /* 18 serial_number_word1 */ + 0, /* 19 serial_number_word2 */ + 0, /* 20 serial_number_word3 */ + 0, /* 21 check_sum */ + {1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1} + , /* 22-29 oem_name[16] */ + 0, /* 30 dvc_err_code */ + 0, /* 31 adv_err_code */ + 0, /* 32 adv_err_addr */ + 0, /* 33 saved_dvc_err_code */ + 0, /* 34 saved_adv_err_code */ + 0, /* 35 saved_adv_err_addr */ + 0, /* 36 reserved */ + 0, /* 37 reserved */ + 0, /* 38 reserved */ + 0, /* 39 reserved */ + 0, /* 40 reserved */ + 0, /* 41 reserved */ + 0, /* 42 reserved */ + 0, /* 43 reserved */ + 0, /* 44 reserved */ + 0, /* 45 reserved */ + 0, /* 46 reserved */ + 0, /* 47 reserved */ + 0, /* 48 reserved */ + 0, /* 49 reserved */ + 0, /* 50 reserved */ + 0, /* 51 reserved */ + 0, /* 52 reserved */ + 0, /* 53 reserved */ + 0, /* 54 reserved */ + 0, /* 55 reserved */ + 0, /* 56 cisptr_lsw */ + 0, /* 57 cisprt_msw */ + 0, /* 58 subsysvid */ + 0, /* 59 subsysid */ + 0, /* 60 reserved */ + 0, /* 61 reserved */ + 0, /* 62 reserved */ + 0 /* 63 reserved */ +}; + +#ifdef CONFIG_PCI +/* + * Wait for EEPROM command to complete + */ +static void AdvWaitEEPCmd(AdvPortAddr iop_base) +{ + int eep_delay_ms; + + for (eep_delay_ms = 0; eep_delay_ms < ADV_EEP_DELAY_MS; eep_delay_ms++) { + if (AdvReadWordRegister(iop_base, IOPW_EE_CMD) & + ASC_EEP_CMD_DONE) { + break; + } + mdelay(1); + } + if ((AdvReadWordRegister(iop_base, IOPW_EE_CMD) & ASC_EEP_CMD_DONE) == + 0) + BUG(); +} + +/* + * Read the EEPROM from specified location + */ +static ushort AdvReadEEPWord(AdvPortAddr iop_base, int eep_word_addr) +{ + AdvWriteWordRegister(iop_base, IOPW_EE_CMD, + ASC_EEP_CMD_READ | eep_word_addr); + AdvWaitEEPCmd(iop_base); + return AdvReadWordRegister(iop_base, IOPW_EE_DATA); +} + +/* + * Write the EEPROM from 'cfg_buf'. + */ +static void AdvSet3550EEPConfig(AdvPortAddr iop_base, + ADVEEP_3550_CONFIG *cfg_buf) +{ + ushort *wbuf; + ushort addr, chksum; + ushort *charfields; + + wbuf = (ushort *)cfg_buf; + charfields = (ushort *)&ADVEEP_3550_Config_Field_IsChar; + chksum = 0; + + AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_WRITE_ABLE); + AdvWaitEEPCmd(iop_base); + + /* + * Write EEPROM from word 0 to word 20. + */ + for (addr = ADV_EEP_DVC_CFG_BEGIN; + addr < ADV_EEP_DVC_CFG_END; addr++, wbuf++) { + ushort word; + + if (*charfields++) { + word = cpu_to_le16(*wbuf); + } else { + word = *wbuf; + } + chksum += *wbuf; /* Checksum is calculated from word values. */ + AdvWriteWordRegister(iop_base, IOPW_EE_DATA, word); + AdvWriteWordRegister(iop_base, IOPW_EE_CMD, + ASC_EEP_CMD_WRITE | addr); + AdvWaitEEPCmd(iop_base); + mdelay(ADV_EEP_DELAY_MS); + } + + /* + * Write EEPROM checksum at word 21. + */ + AdvWriteWordRegister(iop_base, IOPW_EE_DATA, chksum); + AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_WRITE | addr); + AdvWaitEEPCmd(iop_base); + wbuf++; + charfields++; + + /* + * Write EEPROM OEM name at words 22 to 29. + */ + for (addr = ADV_EEP_DVC_CTL_BEGIN; + addr < ADV_EEP_MAX_WORD_ADDR; addr++, wbuf++) { + ushort word; + + if (*charfields++) { + word = cpu_to_le16(*wbuf); + } else { + word = *wbuf; + } + AdvWriteWordRegister(iop_base, IOPW_EE_DATA, word); + AdvWriteWordRegister(iop_base, IOPW_EE_CMD, + ASC_EEP_CMD_WRITE | addr); + AdvWaitEEPCmd(iop_base); + } + AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_WRITE_DISABLE); + AdvWaitEEPCmd(iop_base); +} + +/* + * Write the EEPROM from 'cfg_buf'. + */ +static void AdvSet38C0800EEPConfig(AdvPortAddr iop_base, + ADVEEP_38C0800_CONFIG *cfg_buf) +{ + ushort *wbuf; + ushort *charfields; + ushort addr, chksum; + + wbuf = (ushort *)cfg_buf; + charfields = (ushort *)&ADVEEP_38C0800_Config_Field_IsChar; + chksum = 0; + + AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_WRITE_ABLE); + AdvWaitEEPCmd(iop_base); + + /* + * Write EEPROM from word 0 to word 20. + */ + for (addr = ADV_EEP_DVC_CFG_BEGIN; + addr < ADV_EEP_DVC_CFG_END; addr++, wbuf++) { + ushort word; + + if (*charfields++) { + word = cpu_to_le16(*wbuf); + } else { + word = *wbuf; + } + chksum += *wbuf; /* Checksum is calculated from word values. */ + AdvWriteWordRegister(iop_base, IOPW_EE_DATA, word); + AdvWriteWordRegister(iop_base, IOPW_EE_CMD, + ASC_EEP_CMD_WRITE | addr); + AdvWaitEEPCmd(iop_base); + mdelay(ADV_EEP_DELAY_MS); + } + + /* + * Write EEPROM checksum at word 21. + */ + AdvWriteWordRegister(iop_base, IOPW_EE_DATA, chksum); + AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_WRITE | addr); + AdvWaitEEPCmd(iop_base); + wbuf++; + charfields++; + + /* + * Write EEPROM OEM name at words 22 to 29. + */ + for (addr = ADV_EEP_DVC_CTL_BEGIN; + addr < ADV_EEP_MAX_WORD_ADDR; addr++, wbuf++) { + ushort word; + + if (*charfields++) { + word = cpu_to_le16(*wbuf); + } else { + word = *wbuf; + } + AdvWriteWordRegister(iop_base, IOPW_EE_DATA, word); + AdvWriteWordRegister(iop_base, IOPW_EE_CMD, + ASC_EEP_CMD_WRITE | addr); + AdvWaitEEPCmd(iop_base); + } + AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_WRITE_DISABLE); + AdvWaitEEPCmd(iop_base); +} + +/* + * Write the EEPROM from 'cfg_buf'. + */ +static void AdvSet38C1600EEPConfig(AdvPortAddr iop_base, + ADVEEP_38C1600_CONFIG *cfg_buf) +{ + ushort *wbuf; + ushort *charfields; + ushort addr, chksum; + + wbuf = (ushort *)cfg_buf; + charfields = (ushort *)&ADVEEP_38C1600_Config_Field_IsChar; + chksum = 0; + + AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_WRITE_ABLE); + AdvWaitEEPCmd(iop_base); + + /* + * Write EEPROM from word 0 to word 20. + */ + for (addr = ADV_EEP_DVC_CFG_BEGIN; + addr < ADV_EEP_DVC_CFG_END; addr++, wbuf++) { + ushort word; + + if (*charfields++) { + word = cpu_to_le16(*wbuf); + } else { + word = *wbuf; + } + chksum += *wbuf; /* Checksum is calculated from word values. */ + AdvWriteWordRegister(iop_base, IOPW_EE_DATA, word); + AdvWriteWordRegister(iop_base, IOPW_EE_CMD, + ASC_EEP_CMD_WRITE | addr); + AdvWaitEEPCmd(iop_base); + mdelay(ADV_EEP_DELAY_MS); + } + + /* + * Write EEPROM checksum at word 21. + */ + AdvWriteWordRegister(iop_base, IOPW_EE_DATA, chksum); + AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_WRITE | addr); + AdvWaitEEPCmd(iop_base); + wbuf++; + charfields++; + + /* + * Write EEPROM OEM name at words 22 to 29. + */ + for (addr = ADV_EEP_DVC_CTL_BEGIN; + addr < ADV_EEP_MAX_WORD_ADDR; addr++, wbuf++) { + ushort word; + + if (*charfields++) { + word = cpu_to_le16(*wbuf); + } else { + word = *wbuf; + } + AdvWriteWordRegister(iop_base, IOPW_EE_DATA, word); + AdvWriteWordRegister(iop_base, IOPW_EE_CMD, + ASC_EEP_CMD_WRITE | addr); + AdvWaitEEPCmd(iop_base); + } + AdvWriteWordRegister(iop_base, IOPW_EE_CMD, ASC_EEP_CMD_WRITE_DISABLE); + AdvWaitEEPCmd(iop_base); +} + +/* + * Read EEPROM configuration into the specified buffer. + * + * Return a checksum based on the EEPROM configuration read. + */ +static ushort AdvGet3550EEPConfig(AdvPortAddr iop_base, + ADVEEP_3550_CONFIG *cfg_buf) +{ + ushort wval, chksum; + ushort *wbuf; + int eep_addr; + ushort *charfields; + + charfields = (ushort *)&ADVEEP_3550_Config_Field_IsChar; + wbuf = (ushort *)cfg_buf; + chksum = 0; + + for (eep_addr = ADV_EEP_DVC_CFG_BEGIN; + eep_addr < ADV_EEP_DVC_CFG_END; eep_addr++, wbuf++) { + wval = AdvReadEEPWord(iop_base, eep_addr); + chksum += wval; /* Checksum is calculated from word values. */ + if (*charfields++) { + *wbuf = le16_to_cpu(wval); + } else { + *wbuf = wval; + } + } + /* Read checksum word. */ + *wbuf = AdvReadEEPWord(iop_base, eep_addr); + wbuf++; + charfields++; + + /* Read rest of EEPROM not covered by the checksum. */ + for (eep_addr = ADV_EEP_DVC_CTL_BEGIN; + eep_addr < ADV_EEP_MAX_WORD_ADDR; eep_addr++, wbuf++) { + *wbuf = AdvReadEEPWord(iop_base, eep_addr); + if (*charfields++) { + *wbuf = le16_to_cpu(*wbuf); + } + } + return chksum; +} + +/* + * Read EEPROM configuration into the specified buffer. + * + * Return a checksum based on the EEPROM configuration read. + */ +static ushort AdvGet38C0800EEPConfig(AdvPortAddr iop_base, + ADVEEP_38C0800_CONFIG *cfg_buf) +{ + ushort wval, chksum; + ushort *wbuf; + int eep_addr; + ushort *charfields; + + charfields = (ushort *)&ADVEEP_38C0800_Config_Field_IsChar; + wbuf = (ushort *)cfg_buf; + chksum = 0; + + for (eep_addr = ADV_EEP_DVC_CFG_BEGIN; + eep_addr < ADV_EEP_DVC_CFG_END; eep_addr++, wbuf++) { + wval = AdvReadEEPWord(iop_base, eep_addr); + chksum += wval; /* Checksum is calculated from word values. */ + if (*charfields++) { + *wbuf = le16_to_cpu(wval); + } else { + *wbuf = wval; + } + } + /* Read checksum word. */ + *wbuf = AdvReadEEPWord(iop_base, eep_addr); + wbuf++; + charfields++; + + /* Read rest of EEPROM not covered by the checksum. */ + for (eep_addr = ADV_EEP_DVC_CTL_BEGIN; + eep_addr < ADV_EEP_MAX_WORD_ADDR; eep_addr++, wbuf++) { + *wbuf = AdvReadEEPWord(iop_base, eep_addr); + if (*charfields++) { + *wbuf = le16_to_cpu(*wbuf); + } + } + return chksum; +} + +/* + * Read EEPROM configuration into the specified buffer. + * + * Return a checksum based on the EEPROM configuration read. + */ +static ushort AdvGet38C1600EEPConfig(AdvPortAddr iop_base, + ADVEEP_38C1600_CONFIG *cfg_buf) +{ + ushort wval, chksum; + ushort *wbuf; + int eep_addr; + ushort *charfields; + + charfields = (ushort *)&ADVEEP_38C1600_Config_Field_IsChar; + wbuf = (ushort *)cfg_buf; + chksum = 0; + + for (eep_addr = ADV_EEP_DVC_CFG_BEGIN; + eep_addr < ADV_EEP_DVC_CFG_END; eep_addr++, wbuf++) { + wval = AdvReadEEPWord(iop_base, eep_addr); + chksum += wval; /* Checksum is calculated from word values. */ + if (*charfields++) { + *wbuf = le16_to_cpu(wval); + } else { + *wbuf = wval; + } + } + /* Read checksum word. */ + *wbuf = AdvReadEEPWord(iop_base, eep_addr); + wbuf++; + charfields++; + + /* Read rest of EEPROM not covered by the checksum. */ + for (eep_addr = ADV_EEP_DVC_CTL_BEGIN; + eep_addr < ADV_EEP_MAX_WORD_ADDR; eep_addr++, wbuf++) { + *wbuf = AdvReadEEPWord(iop_base, eep_addr); + if (*charfields++) { + *wbuf = le16_to_cpu(*wbuf); + } + } + return chksum; +} + +/* + * Read the board's EEPROM configuration. Set fields in ADV_DVC_VAR and + * ADV_DVC_CFG based on the EEPROM settings. The chip is stopped while + * all of this is done. + * + * On failure set the ADV_DVC_VAR field 'err_code' and return ADV_ERROR. + * + * For a non-fatal error return a warning code. If there are no warnings + * then 0 is returned. + * + * Note: Chip is stopped on entry. + */ +static int AdvInitFrom3550EEP(ADV_DVC_VAR *asc_dvc) +{ + AdvPortAddr iop_base; + ushort warn_code; + ADVEEP_3550_CONFIG eep_config; + + iop_base = asc_dvc->iop_base; + + warn_code = 0; + + /* + * Read the board's EEPROM configuration. + * + * Set default values if a bad checksum is found. + */ + if (AdvGet3550EEPConfig(iop_base, &eep_config) != eep_config.check_sum) { + warn_code |= ASC_WARN_EEPROM_CHKSUM; + + /* + * Set EEPROM default values. + */ + memcpy(&eep_config, &Default_3550_EEPROM_Config, + sizeof(ADVEEP_3550_CONFIG)); + + /* + * Assume the 6 byte board serial number that was read from + * EEPROM is correct even if the EEPROM checksum failed. + */ + eep_config.serial_number_word3 = + AdvReadEEPWord(iop_base, ADV_EEP_DVC_CFG_END - 1); + + eep_config.serial_number_word2 = + AdvReadEEPWord(iop_base, ADV_EEP_DVC_CFG_END - 2); + + eep_config.serial_number_word1 = + AdvReadEEPWord(iop_base, ADV_EEP_DVC_CFG_END - 3); + + AdvSet3550EEPConfig(iop_base, &eep_config); + } + /* + * Set ASC_DVC_VAR and ASC_DVC_CFG variables from the + * EEPROM configuration that was read. + * + * This is the mapping of EEPROM fields to Adv Library fields. + */ + asc_dvc->wdtr_able = eep_config.wdtr_able; + asc_dvc->sdtr_able = eep_config.sdtr_able; + asc_dvc->ultra_able = eep_config.ultra_able; + asc_dvc->tagqng_able = eep_config.tagqng_able; + asc_dvc->cfg->disc_enable = eep_config.disc_enable; + asc_dvc->max_host_qng = eep_config.max_host_qng; + asc_dvc->max_dvc_qng = eep_config.max_dvc_qng; + asc_dvc->chip_scsi_id = (eep_config.adapter_scsi_id & ADV_MAX_TID); + asc_dvc->start_motor = eep_config.start_motor; + asc_dvc->scsi_reset_wait = eep_config.scsi_reset_delay; + asc_dvc->bios_ctrl = eep_config.bios_ctrl; + asc_dvc->no_scam = eep_config.scam_tolerant; + asc_dvc->cfg->serial1 = eep_config.serial_number_word1; + asc_dvc->cfg->serial2 = eep_config.serial_number_word2; + asc_dvc->cfg->serial3 = eep_config.serial_number_word3; + + /* + * Set the host maximum queuing (max. 253, min. 16) and the per device + * maximum queuing (max. 63, min. 4). + */ + if (eep_config.max_host_qng > ASC_DEF_MAX_HOST_QNG) { + eep_config.max_host_qng = ASC_DEF_MAX_HOST_QNG; + } else if (eep_config.max_host_qng < ASC_DEF_MIN_HOST_QNG) { + /* If the value is zero, assume it is uninitialized. */ + if (eep_config.max_host_qng == 0) { + eep_config.max_host_qng = ASC_DEF_MAX_HOST_QNG; + } else { + eep_config.max_host_qng = ASC_DEF_MIN_HOST_QNG; + } + } + + if (eep_config.max_dvc_qng > ASC_DEF_MAX_DVC_QNG) { + eep_config.max_dvc_qng = ASC_DEF_MAX_DVC_QNG; + } else if (eep_config.max_dvc_qng < ASC_DEF_MIN_DVC_QNG) { + /* If the value is zero, assume it is uninitialized. */ + if (eep_config.max_dvc_qng == 0) { + eep_config.max_dvc_qng = ASC_DEF_MAX_DVC_QNG; + } else { + eep_config.max_dvc_qng = ASC_DEF_MIN_DVC_QNG; + } + } + + /* + * If 'max_dvc_qng' is greater than 'max_host_qng', then + * set 'max_dvc_qng' to 'max_host_qng'. + */ + if (eep_config.max_dvc_qng > eep_config.max_host_qng) { + eep_config.max_dvc_qng = eep_config.max_host_qng; + } + + /* + * Set ADV_DVC_VAR 'max_host_qng' and ADV_DVC_VAR 'max_dvc_qng' + * values based on possibly adjusted EEPROM values. + */ + asc_dvc->max_host_qng = eep_config.max_host_qng; + asc_dvc->max_dvc_qng = eep_config.max_dvc_qng; + + /* + * If the EEPROM 'termination' field is set to automatic (0), then set + * the ADV_DVC_CFG 'termination' field to automatic also. + * + * If the termination is specified with a non-zero 'termination' + * value check that a legal value is set and set the ADV_DVC_CFG + * 'termination' field appropriately. + */ + if (eep_config.termination == 0) { + asc_dvc->cfg->termination = 0; /* auto termination */ + } else { + /* Enable manual control with low off / high off. */ + if (eep_config.termination == 1) { + asc_dvc->cfg->termination = TERM_CTL_SEL; + + /* Enable manual control with low off / high on. */ + } else if (eep_config.termination == 2) { + asc_dvc->cfg->termination = TERM_CTL_SEL | TERM_CTL_H; + + /* Enable manual control with low on / high on. */ + } else if (eep_config.termination == 3) { + asc_dvc->cfg->termination = + TERM_CTL_SEL | TERM_CTL_H | TERM_CTL_L; + } else { + /* + * The EEPROM 'termination' field contains a bad value. Use + * automatic termination instead. + */ + asc_dvc->cfg->termination = 0; + warn_code |= ASC_WARN_EEPROM_TERMINATION; + } + } + + return warn_code; +} + +/* + * Read the board's EEPROM configuration. Set fields in ADV_DVC_VAR and + * ADV_DVC_CFG based on the EEPROM settings. The chip is stopped while + * all of this is done. + * + * On failure set the ADV_DVC_VAR field 'err_code' and return ADV_ERROR. + * + * For a non-fatal error return a warning code. If there are no warnings + * then 0 is returned. + * + * Note: Chip is stopped on entry. + */ +static int AdvInitFrom38C0800EEP(ADV_DVC_VAR *asc_dvc) +{ + AdvPortAddr iop_base; + ushort warn_code; + ADVEEP_38C0800_CONFIG eep_config; + uchar tid, termination; + ushort sdtr_speed = 0; + + iop_base = asc_dvc->iop_base; + + warn_code = 0; + + /* + * Read the board's EEPROM configuration. + * + * Set default values if a bad checksum is found. + */ + if (AdvGet38C0800EEPConfig(iop_base, &eep_config) != + eep_config.check_sum) { + warn_code |= ASC_WARN_EEPROM_CHKSUM; + + /* + * Set EEPROM default values. + */ + memcpy(&eep_config, &Default_38C0800_EEPROM_Config, + sizeof(ADVEEP_38C0800_CONFIG)); + + /* + * Assume the 6 byte board serial number that was read from + * EEPROM is correct even if the EEPROM checksum failed. + */ + eep_config.serial_number_word3 = + AdvReadEEPWord(iop_base, ADV_EEP_DVC_CFG_END - 1); + + eep_config.serial_number_word2 = + AdvReadEEPWord(iop_base, ADV_EEP_DVC_CFG_END - 2); + + eep_config.serial_number_word1 = + AdvReadEEPWord(iop_base, ADV_EEP_DVC_CFG_END - 3); + + AdvSet38C0800EEPConfig(iop_base, &eep_config); + } + /* + * Set ADV_DVC_VAR and ADV_DVC_CFG variables from the + * EEPROM configuration that was read. + * + * This is the mapping of EEPROM fields to Adv Library fields. + */ + asc_dvc->wdtr_able = eep_config.wdtr_able; + asc_dvc->sdtr_speed1 = eep_config.sdtr_speed1; + asc_dvc->sdtr_speed2 = eep_config.sdtr_speed2; + asc_dvc->sdtr_speed3 = eep_config.sdtr_speed3; + asc_dvc->sdtr_speed4 = eep_config.sdtr_speed4; + asc_dvc->tagqng_able = eep_config.tagqng_able; + asc_dvc->cfg->disc_enable = eep_config.disc_enable; + asc_dvc->max_host_qng = eep_config.max_host_qng; + asc_dvc->max_dvc_qng = eep_config.max_dvc_qng; + asc_dvc->chip_scsi_id = (eep_config.adapter_scsi_id & ADV_MAX_TID); + asc_dvc->start_motor = eep_config.start_motor; + asc_dvc->scsi_reset_wait = eep_config.scsi_reset_delay; + asc_dvc->bios_ctrl = eep_config.bios_ctrl; + asc_dvc->no_scam = eep_config.scam_tolerant; + asc_dvc->cfg->serial1 = eep_config.serial_number_word1; + asc_dvc->cfg->serial2 = eep_config.serial_number_word2; + asc_dvc->cfg->serial3 = eep_config.serial_number_word3; + + /* + * For every Target ID if any of its 'sdtr_speed[1234]' bits + * are set, then set an 'sdtr_able' bit for it. + */ + asc_dvc->sdtr_able = 0; + for (tid = 0; tid <= ADV_MAX_TID; tid++) { + if (tid == 0) { + sdtr_speed = asc_dvc->sdtr_speed1; + } else if (tid == 4) { + sdtr_speed = asc_dvc->sdtr_speed2; + } else if (tid == 8) { + sdtr_speed = asc_dvc->sdtr_speed3; + } else if (tid == 12) { + sdtr_speed = asc_dvc->sdtr_speed4; + } + if (sdtr_speed & ADV_MAX_TID) { + asc_dvc->sdtr_able |= (1 << tid); + } + sdtr_speed >>= 4; + } + + /* + * Set the host maximum queuing (max. 253, min. 16) and the per device + * maximum queuing (max. 63, min. 4). + */ + if (eep_config.max_host_qng > ASC_DEF_MAX_HOST_QNG) { + eep_config.max_host_qng = ASC_DEF_MAX_HOST_QNG; + } else if (eep_config.max_host_qng < ASC_DEF_MIN_HOST_QNG) { + /* If the value is zero, assume it is uninitialized. */ + if (eep_config.max_host_qng == 0) { + eep_config.max_host_qng = ASC_DEF_MAX_HOST_QNG; + } else { + eep_config.max_host_qng = ASC_DEF_MIN_HOST_QNG; + } + } + + if (eep_config.max_dvc_qng > ASC_DEF_MAX_DVC_QNG) { + eep_config.max_dvc_qng = ASC_DEF_MAX_DVC_QNG; + } else if (eep_config.max_dvc_qng < ASC_DEF_MIN_DVC_QNG) { + /* If the value is zero, assume it is uninitialized. */ + if (eep_config.max_dvc_qng == 0) { + eep_config.max_dvc_qng = ASC_DEF_MAX_DVC_QNG; + } else { + eep_config.max_dvc_qng = ASC_DEF_MIN_DVC_QNG; + } + } + + /* + * If 'max_dvc_qng' is greater than 'max_host_qng', then + * set 'max_dvc_qng' to 'max_host_qng'. + */ + if (eep_config.max_dvc_qng > eep_config.max_host_qng) { + eep_config.max_dvc_qng = eep_config.max_host_qng; + } + + /* + * Set ADV_DVC_VAR 'max_host_qng' and ADV_DVC_VAR 'max_dvc_qng' + * values based on possibly adjusted EEPROM values. + */ + asc_dvc->max_host_qng = eep_config.max_host_qng; + asc_dvc->max_dvc_qng = eep_config.max_dvc_qng; + + /* + * If the EEPROM 'termination' field is set to automatic (0), then set + * the ADV_DVC_CFG 'termination' field to automatic also. + * + * If the termination is specified with a non-zero 'termination' + * value check that a legal value is set and set the ADV_DVC_CFG + * 'termination' field appropriately. + */ + if (eep_config.termination_se == 0) { + termination = 0; /* auto termination for SE */ + } else { + /* Enable manual control with low off / high off. */ + if (eep_config.termination_se == 1) { + termination = 0; + + /* Enable manual control with low off / high on. */ + } else if (eep_config.termination_se == 2) { + termination = TERM_SE_HI; + + /* Enable manual control with low on / high on. */ + } else if (eep_config.termination_se == 3) { + termination = TERM_SE; + } else { + /* + * The EEPROM 'termination_se' field contains a bad value. + * Use automatic termination instead. + */ + termination = 0; + warn_code |= ASC_WARN_EEPROM_TERMINATION; + } + } + + if (eep_config.termination_lvd == 0) { + asc_dvc->cfg->termination = termination; /* auto termination for LVD */ + } else { + /* Enable manual control with low off / high off. */ + if (eep_config.termination_lvd == 1) { + asc_dvc->cfg->termination = termination; + + /* Enable manual control with low off / high on. */ + } else if (eep_config.termination_lvd == 2) { + asc_dvc->cfg->termination = termination | TERM_LVD_HI; + + /* Enable manual control with low on / high on. */ + } else if (eep_config.termination_lvd == 3) { + asc_dvc->cfg->termination = termination | TERM_LVD; + } else { + /* + * The EEPROM 'termination_lvd' field contains a bad value. + * Use automatic termination instead. + */ + asc_dvc->cfg->termination = termination; + warn_code |= ASC_WARN_EEPROM_TERMINATION; + } + } + + return warn_code; +} + +/* + * Read the board's EEPROM configuration. Set fields in ASC_DVC_VAR and + * ASC_DVC_CFG based on the EEPROM settings. The chip is stopped while + * all of this is done. + * + * On failure set the ASC_DVC_VAR field 'err_code' and return ADV_ERROR. + * + * For a non-fatal error return a warning code. If there are no warnings + * then 0 is returned. + * + * Note: Chip is stopped on entry. + */ +static int AdvInitFrom38C1600EEP(ADV_DVC_VAR *asc_dvc) +{ + AdvPortAddr iop_base; + ushort warn_code; + ADVEEP_38C1600_CONFIG eep_config; + uchar tid, termination; + ushort sdtr_speed = 0; + + iop_base = asc_dvc->iop_base; + + warn_code = 0; + + /* + * Read the board's EEPROM configuration. + * + * Set default values if a bad checksum is found. + */ + if (AdvGet38C1600EEPConfig(iop_base, &eep_config) != + eep_config.check_sum) { + struct pci_dev *pdev = adv_dvc_to_pdev(asc_dvc); + warn_code |= ASC_WARN_EEPROM_CHKSUM; + + /* + * Set EEPROM default values. + */ + memcpy(&eep_config, &Default_38C1600_EEPROM_Config, + sizeof(ADVEEP_38C1600_CONFIG)); + + if (PCI_FUNC(pdev->devfn) != 0) { + u8 ints; + /* + * Disable Bit 14 (BIOS_ENABLE) to fix SPARC Ultra 60 + * and old Mac system booting problem. The Expansion + * ROM must be disabled in Function 1 for these systems + */ + eep_config.cfg_lsw &= ~ADV_EEPROM_BIOS_ENABLE; + /* + * Clear the INTAB (bit 11) if the GPIO 0 input + * indicates the Function 1 interrupt line is wired + * to INTB. + * + * Set/Clear Bit 11 (INTAB) from the GPIO bit 0 input: + * 1 - Function 1 interrupt line wired to INT A. + * 0 - Function 1 interrupt line wired to INT B. + * + * Note: Function 0 is always wired to INTA. + * Put all 5 GPIO bits in input mode and then read + * their input values. + */ + AdvWriteByteRegister(iop_base, IOPB_GPIO_CNTL, 0); + ints = AdvReadByteRegister(iop_base, IOPB_GPIO_DATA); + if ((ints & 0x01) == 0) + eep_config.cfg_lsw &= ~ADV_EEPROM_INTAB; + } + + /* + * Assume the 6 byte board serial number that was read from + * EEPROM is correct even if the EEPROM checksum failed. + */ + eep_config.serial_number_word3 = + AdvReadEEPWord(iop_base, ADV_EEP_DVC_CFG_END - 1); + eep_config.serial_number_word2 = + AdvReadEEPWord(iop_base, ADV_EEP_DVC_CFG_END - 2); + eep_config.serial_number_word1 = + AdvReadEEPWord(iop_base, ADV_EEP_DVC_CFG_END - 3); + + AdvSet38C1600EEPConfig(iop_base, &eep_config); + } + + /* + * Set ASC_DVC_VAR and ASC_DVC_CFG variables from the + * EEPROM configuration that was read. + * + * This is the mapping of EEPROM fields to Adv Library fields. + */ + asc_dvc->wdtr_able = eep_config.wdtr_able; + asc_dvc->sdtr_speed1 = eep_config.sdtr_speed1; + asc_dvc->sdtr_speed2 = eep_config.sdtr_speed2; + asc_dvc->sdtr_speed3 = eep_config.sdtr_speed3; + asc_dvc->sdtr_speed4 = eep_config.sdtr_speed4; + asc_dvc->ppr_able = 0; + asc_dvc->tagqng_able = eep_config.tagqng_able; + asc_dvc->cfg->disc_enable = eep_config.disc_enable; + asc_dvc->max_host_qng = eep_config.max_host_qng; + asc_dvc->max_dvc_qng = eep_config.max_dvc_qng; + asc_dvc->chip_scsi_id = (eep_config.adapter_scsi_id & ASC_MAX_TID); + asc_dvc->start_motor = eep_config.start_motor; + asc_dvc->scsi_reset_wait = eep_config.scsi_reset_delay; + asc_dvc->bios_ctrl = eep_config.bios_ctrl; + asc_dvc->no_scam = eep_config.scam_tolerant; + + /* + * For every Target ID if any of its 'sdtr_speed[1234]' bits + * are set, then set an 'sdtr_able' bit for it. + */ + asc_dvc->sdtr_able = 0; + for (tid = 0; tid <= ASC_MAX_TID; tid++) { + if (tid == 0) { + sdtr_speed = asc_dvc->sdtr_speed1; + } else if (tid == 4) { + sdtr_speed = asc_dvc->sdtr_speed2; + } else if (tid == 8) { + sdtr_speed = asc_dvc->sdtr_speed3; + } else if (tid == 12) { + sdtr_speed = asc_dvc->sdtr_speed4; + } + if (sdtr_speed & ASC_MAX_TID) { + asc_dvc->sdtr_able |= (1 << tid); + } + sdtr_speed >>= 4; + } + + /* + * Set the host maximum queuing (max. 253, min. 16) and the per device + * maximum queuing (max. 63, min. 4). + */ + if (eep_config.max_host_qng > ASC_DEF_MAX_HOST_QNG) { + eep_config.max_host_qng = ASC_DEF_MAX_HOST_QNG; + } else if (eep_config.max_host_qng < ASC_DEF_MIN_HOST_QNG) { + /* If the value is zero, assume it is uninitialized. */ + if (eep_config.max_host_qng == 0) { + eep_config.max_host_qng = ASC_DEF_MAX_HOST_QNG; + } else { + eep_config.max_host_qng = ASC_DEF_MIN_HOST_QNG; + } + } + + if (eep_config.max_dvc_qng > ASC_DEF_MAX_DVC_QNG) { + eep_config.max_dvc_qng = ASC_DEF_MAX_DVC_QNG; + } else if (eep_config.max_dvc_qng < ASC_DEF_MIN_DVC_QNG) { + /* If the value is zero, assume it is uninitialized. */ + if (eep_config.max_dvc_qng == 0) { + eep_config.max_dvc_qng = ASC_DEF_MAX_DVC_QNG; + } else { + eep_config.max_dvc_qng = ASC_DEF_MIN_DVC_QNG; + } + } + + /* + * If 'max_dvc_qng' is greater than 'max_host_qng', then + * set 'max_dvc_qng' to 'max_host_qng'. + */ + if (eep_config.max_dvc_qng > eep_config.max_host_qng) { + eep_config.max_dvc_qng = eep_config.max_host_qng; + } + + /* + * Set ASC_DVC_VAR 'max_host_qng' and ASC_DVC_VAR 'max_dvc_qng' + * values based on possibly adjusted EEPROM values. + */ + asc_dvc->max_host_qng = eep_config.max_host_qng; + asc_dvc->max_dvc_qng = eep_config.max_dvc_qng; + + /* + * If the EEPROM 'termination' field is set to automatic (0), then set + * the ASC_DVC_CFG 'termination' field to automatic also. + * + * If the termination is specified with a non-zero 'termination' + * value check that a legal value is set and set the ASC_DVC_CFG + * 'termination' field appropriately. + */ + if (eep_config.termination_se == 0) { + termination = 0; /* auto termination for SE */ + } else { + /* Enable manual control with low off / high off. */ + if (eep_config.termination_se == 1) { + termination = 0; + + /* Enable manual control with low off / high on. */ + } else if (eep_config.termination_se == 2) { + termination = TERM_SE_HI; + + /* Enable manual control with low on / high on. */ + } else if (eep_config.termination_se == 3) { + termination = TERM_SE; + } else { + /* + * The EEPROM 'termination_se' field contains a bad value. + * Use automatic termination instead. + */ + termination = 0; + warn_code |= ASC_WARN_EEPROM_TERMINATION; + } + } + + if (eep_config.termination_lvd == 0) { + asc_dvc->cfg->termination = termination; /* auto termination for LVD */ + } else { + /* Enable manual control with low off / high off. */ + if (eep_config.termination_lvd == 1) { + asc_dvc->cfg->termination = termination; + + /* Enable manual control with low off / high on. */ + } else if (eep_config.termination_lvd == 2) { + asc_dvc->cfg->termination = termination | TERM_LVD_HI; + + /* Enable manual control with low on / high on. */ + } else if (eep_config.termination_lvd == 3) { + asc_dvc->cfg->termination = termination | TERM_LVD; + } else { + /* + * The EEPROM 'termination_lvd' field contains a bad value. + * Use automatic termination instead. + */ + asc_dvc->cfg->termination = termination; + warn_code |= ASC_WARN_EEPROM_TERMINATION; + } + } + + return warn_code; +} + +/* + * Initialize the ADV_DVC_VAR structure. + * + * On failure set the ADV_DVC_VAR field 'err_code' and return ADV_ERROR. + * + * For a non-fatal error return a warning code. If there are no warnings + * then 0 is returned. + */ +static int AdvInitGetConfig(struct pci_dev *pdev, struct Scsi_Host *shost) +{ + struct asc_board *board = shost_priv(shost); + ADV_DVC_VAR *asc_dvc = &board->dvc_var.adv_dvc_var; + unsigned short warn_code = 0; + AdvPortAddr iop_base = asc_dvc->iop_base; + u16 cmd; + int status; + + asc_dvc->err_code = 0; + + /* + * Save the state of the PCI Configuration Command Register + * "Parity Error Response Control" Bit. If the bit is clear (0), + * in AdvInitAsc3550/38C0800Driver() tell the microcode to ignore + * DMA parity errors. + */ + asc_dvc->cfg->control_flag = 0; + pci_read_config_word(pdev, PCI_COMMAND, &cmd); + if ((cmd & PCI_COMMAND_PARITY) == 0) + asc_dvc->cfg->control_flag |= CONTROL_FLAG_IGNORE_PERR; + + asc_dvc->cfg->chip_version = + AdvGetChipVersion(iop_base, asc_dvc->bus_type); + + ASC_DBG(1, "iopb_chip_id_1: 0x%x 0x%x\n", + (ushort)AdvReadByteRegister(iop_base, IOPB_CHIP_ID_1), + (ushort)ADV_CHIP_ID_BYTE); + + ASC_DBG(1, "iopw_chip_id_0: 0x%x 0x%x\n", + (ushort)AdvReadWordRegister(iop_base, IOPW_CHIP_ID_0), + (ushort)ADV_CHIP_ID_WORD); + + /* + * Reset the chip to start and allow register writes. + */ + if (AdvFindSignature(iop_base) == 0) { + asc_dvc->err_code = ASC_IERR_BAD_SIGNATURE; + return ADV_ERROR; + } else { + /* + * The caller must set 'chip_type' to a valid setting. + */ + if (asc_dvc->chip_type != ADV_CHIP_ASC3550 && + asc_dvc->chip_type != ADV_CHIP_ASC38C0800 && + asc_dvc->chip_type != ADV_CHIP_ASC38C1600) { + asc_dvc->err_code |= ASC_IERR_BAD_CHIPTYPE; + return ADV_ERROR; + } + + /* + * Reset Chip. + */ + AdvWriteWordRegister(iop_base, IOPW_CTRL_REG, + ADV_CTRL_REG_CMD_RESET); + mdelay(100); + AdvWriteWordRegister(iop_base, IOPW_CTRL_REG, + ADV_CTRL_REG_CMD_WR_IO_REG); + + if (asc_dvc->chip_type == ADV_CHIP_ASC38C1600) { + status = AdvInitFrom38C1600EEP(asc_dvc); + } else if (asc_dvc->chip_type == ADV_CHIP_ASC38C0800) { + status = AdvInitFrom38C0800EEP(asc_dvc); + } else { + status = AdvInitFrom3550EEP(asc_dvc); + } + warn_code |= status; + } + + if (warn_code != 0) + shost_printk(KERN_WARNING, shost, "warning: 0x%x\n", warn_code); + + if (asc_dvc->err_code) + shost_printk(KERN_ERR, shost, "error code 0x%x\n", + asc_dvc->err_code); + + return asc_dvc->err_code; +} +#endif + +static struct scsi_host_template advansys_template = { + .proc_name = DRV_NAME, +#ifdef CONFIG_PROC_FS + .show_info = advansys_show_info, +#endif + .name = DRV_NAME, + .info = advansys_info, + .queuecommand = advansys_queuecommand, + .eh_bus_reset_handler = advansys_reset, + .bios_param = advansys_biosparam, + .slave_configure = advansys_slave_configure, + /* + * Because the driver may control an ISA adapter 'unchecked_isa_dma' + * must be set. The flag will be cleared in advansys_board_found + * for non-ISA adapters. + */ + .unchecked_isa_dma = 1, + /* + * All adapters controlled by this driver are capable of large + * scatter-gather lists. According to the mid-level SCSI documentation + * this obviates any performance gain provided by setting + * 'use_clustering'. But empirically while CPU utilization is increased + * by enabling clustering, I/O throughput increases as well. + */ + .use_clustering = ENABLE_CLUSTERING, +}; + +static int advansys_wide_init_chip(struct Scsi_Host *shost) +{ + struct asc_board *board = shost_priv(shost); + struct adv_dvc_var *adv_dvc = &board->dvc_var.adv_dvc_var; + int req_cnt = 0; + adv_req_t *reqp = NULL; + int sg_cnt = 0; + adv_sgblk_t *sgp; + int warn_code, err_code; + + /* + * Allocate buffer carrier structures. The total size + * is about 4 KB, so allocate all at once. + */ + adv_dvc->carrier_buf = kmalloc(ADV_CARRIER_BUFSIZE, GFP_KERNEL); + ASC_DBG(1, "carrier_buf 0x%p\n", adv_dvc->carrier_buf); + + if (!adv_dvc->carrier_buf) + goto kmalloc_failed; + + /* + * Allocate up to 'max_host_qng' request structures for the Wide + * board. The total size is about 16 KB, so allocate all at once. + * If the allocation fails decrement and try again. + */ + for (req_cnt = adv_dvc->max_host_qng; req_cnt > 0; req_cnt--) { + reqp = kmalloc(sizeof(adv_req_t) * req_cnt, GFP_KERNEL); + + ASC_DBG(1, "reqp 0x%p, req_cnt %d, bytes %lu\n", reqp, req_cnt, + (ulong)sizeof(adv_req_t) * req_cnt); + + if (reqp) + break; + } + + if (!reqp) + goto kmalloc_failed; + + adv_dvc->orig_reqp = reqp; + + /* + * Allocate up to ADV_TOT_SG_BLOCK request structures for + * the Wide board. Each structure is about 136 bytes. + */ + board->adv_sgblkp = NULL; + for (sg_cnt = 0; sg_cnt < ADV_TOT_SG_BLOCK; sg_cnt++) { + sgp = kmalloc(sizeof(adv_sgblk_t), GFP_KERNEL); + + if (!sgp) + break; + + sgp->next_sgblkp = board->adv_sgblkp; + board->adv_sgblkp = sgp; + + } + + ASC_DBG(1, "sg_cnt %d * %lu = %lu bytes\n", sg_cnt, sizeof(adv_sgblk_t), + sizeof(adv_sgblk_t) * sg_cnt); + + if (!board->adv_sgblkp) + goto kmalloc_failed; + + /* + * Point 'adv_reqp' to the request structures and + * link them together. + */ + req_cnt--; + reqp[req_cnt].next_reqp = NULL; + for (; req_cnt > 0; req_cnt--) { + reqp[req_cnt - 1].next_reqp = &reqp[req_cnt]; + } + board->adv_reqp = &reqp[0]; + + if (adv_dvc->chip_type == ADV_CHIP_ASC3550) { + ASC_DBG(2, "AdvInitAsc3550Driver()\n"); + warn_code = AdvInitAsc3550Driver(adv_dvc); + } else if (adv_dvc->chip_type == ADV_CHIP_ASC38C0800) { + ASC_DBG(2, "AdvInitAsc38C0800Driver()\n"); + warn_code = AdvInitAsc38C0800Driver(adv_dvc); + } else { + ASC_DBG(2, "AdvInitAsc38C1600Driver()\n"); + warn_code = AdvInitAsc38C1600Driver(adv_dvc); + } + err_code = adv_dvc->err_code; + + if (warn_code || err_code) { + shost_printk(KERN_WARNING, shost, "error: warn 0x%x, error " + "0x%x\n", warn_code, err_code); + } + + goto exit; + + kmalloc_failed: + shost_printk(KERN_ERR, shost, "error: kmalloc() failed\n"); + err_code = ADV_ERROR; + exit: + return err_code; +} + +static void advansys_wide_free_mem(struct asc_board *board) +{ + struct adv_dvc_var *adv_dvc = &board->dvc_var.adv_dvc_var; + kfree(adv_dvc->carrier_buf); + adv_dvc->carrier_buf = NULL; + kfree(adv_dvc->orig_reqp); + adv_dvc->orig_reqp = board->adv_reqp = NULL; + while (board->adv_sgblkp) { + adv_sgblk_t *sgp = board->adv_sgblkp; + board->adv_sgblkp = sgp->next_sgblkp; + kfree(sgp); + } +} + +static int advansys_board_found(struct Scsi_Host *shost, unsigned int iop, + int bus_type) +{ + struct pci_dev *pdev; + struct asc_board *boardp = shost_priv(shost); + ASC_DVC_VAR *asc_dvc_varp = NULL; + ADV_DVC_VAR *adv_dvc_varp = NULL; + int share_irq, warn_code, ret; + + pdev = (bus_type == ASC_IS_PCI) ? to_pci_dev(boardp->dev) : NULL; + + if (ASC_NARROW_BOARD(boardp)) { + ASC_DBG(1, "narrow board\n"); + asc_dvc_varp = &boardp->dvc_var.asc_dvc_var; + asc_dvc_varp->bus_type = bus_type; + asc_dvc_varp->drv_ptr = boardp; + asc_dvc_varp->cfg = &boardp->dvc_cfg.asc_dvc_cfg; + asc_dvc_varp->iop_base = iop; + } else { +#ifdef CONFIG_PCI + adv_dvc_varp = &boardp->dvc_var.adv_dvc_var; + adv_dvc_varp->drv_ptr = boardp; + adv_dvc_varp->cfg = &boardp->dvc_cfg.adv_dvc_cfg; + if (pdev->device == PCI_DEVICE_ID_ASP_ABP940UW) { + ASC_DBG(1, "wide board ASC-3550\n"); + adv_dvc_varp->chip_type = ADV_CHIP_ASC3550; + } else if (pdev->device == PCI_DEVICE_ID_38C0800_REV1) { + ASC_DBG(1, "wide board ASC-38C0800\n"); + adv_dvc_varp->chip_type = ADV_CHIP_ASC38C0800; + } else { + ASC_DBG(1, "wide board ASC-38C1600\n"); + adv_dvc_varp->chip_type = ADV_CHIP_ASC38C1600; + } + + boardp->asc_n_io_port = pci_resource_len(pdev, 1); + boardp->ioremap_addr = pci_ioremap_bar(pdev, 1); + if (!boardp->ioremap_addr) { + shost_printk(KERN_ERR, shost, "ioremap(%lx, %d) " + "returned NULL\n", + (long)pci_resource_start(pdev, 1), + boardp->asc_n_io_port); + ret = -ENODEV; + goto err_shost; + } + adv_dvc_varp->iop_base = (AdvPortAddr)boardp->ioremap_addr; + ASC_DBG(1, "iop_base: 0x%p\n", adv_dvc_varp->iop_base); + + /* + * Even though it isn't used to access wide boards, other + * than for the debug line below, save I/O Port address so + * that it can be reported. + */ + boardp->ioport = iop; + + ASC_DBG(1, "iopb_chip_id_1 0x%x, iopw_chip_id_0 0x%x\n", + (ushort)inp(iop + 1), (ushort)inpw(iop)); +#endif /* CONFIG_PCI */ + } + + if (ASC_NARROW_BOARD(boardp)) { + /* + * Set the board bus type and PCI IRQ before + * calling AscInitGetConfig(). + */ + switch (asc_dvc_varp->bus_type) { +#ifdef CONFIG_ISA + case ASC_IS_ISA: + shost->unchecked_isa_dma = TRUE; + share_irq = 0; + break; + case ASC_IS_VL: + shost->unchecked_isa_dma = FALSE; + share_irq = 0; + break; + case ASC_IS_EISA: + shost->unchecked_isa_dma = FALSE; + share_irq = IRQF_SHARED; + break; +#endif /* CONFIG_ISA */ +#ifdef CONFIG_PCI + case ASC_IS_PCI: + shost->unchecked_isa_dma = FALSE; + share_irq = IRQF_SHARED; + break; +#endif /* CONFIG_PCI */ + default: + shost_printk(KERN_ERR, shost, "unknown adapter type: " + "%d\n", asc_dvc_varp->bus_type); + shost->unchecked_isa_dma = TRUE; + share_irq = 0; + break; + } + + /* + * NOTE: AscInitGetConfig() may change the board's + * bus_type value. The bus_type value should no + * longer be used. If the bus_type field must be + * referenced only use the bit-wise AND operator "&". + */ + ASC_DBG(2, "AscInitGetConfig()\n"); + ret = AscInitGetConfig(shost) ? -ENODEV : 0; + } else { +#ifdef CONFIG_PCI + /* + * For Wide boards set PCI information before calling + * AdvInitGetConfig(). + */ + shost->unchecked_isa_dma = FALSE; + share_irq = IRQF_SHARED; + ASC_DBG(2, "AdvInitGetConfig()\n"); + + ret = AdvInitGetConfig(pdev, shost) ? -ENODEV : 0; +#endif /* CONFIG_PCI */ + } + + if (ret) + goto err_unmap; + + /* + * Save the EEPROM configuration so that it can be displayed + * from /proc/scsi/advansys/[0...]. + */ + if (ASC_NARROW_BOARD(boardp)) { + + ASCEEP_CONFIG *ep; + + /* + * Set the adapter's target id bit in the 'init_tidmask' field. + */ + boardp->init_tidmask |= + ADV_TID_TO_TIDMASK(asc_dvc_varp->cfg->chip_scsi_id); + + /* + * Save EEPROM settings for the board. + */ + ep = &boardp->eep_config.asc_eep; + + ep->init_sdtr = asc_dvc_varp->cfg->sdtr_enable; + ep->disc_enable = asc_dvc_varp->cfg->disc_enable; + ep->use_cmd_qng = asc_dvc_varp->cfg->cmd_qng_enabled; + ASC_EEP_SET_DMA_SPD(ep, asc_dvc_varp->cfg->isa_dma_speed); + ep->start_motor = asc_dvc_varp->start_motor; + ep->cntl = asc_dvc_varp->dvc_cntl; + ep->no_scam = asc_dvc_varp->no_scam; + ep->max_total_qng = asc_dvc_varp->max_total_qng; + ASC_EEP_SET_CHIP_ID(ep, asc_dvc_varp->cfg->chip_scsi_id); + /* 'max_tag_qng' is set to the same value for every device. */ + ep->max_tag_qng = asc_dvc_varp->cfg->max_tag_qng[0]; + ep->adapter_info[0] = asc_dvc_varp->cfg->adapter_info[0]; + ep->adapter_info[1] = asc_dvc_varp->cfg->adapter_info[1]; + ep->adapter_info[2] = asc_dvc_varp->cfg->adapter_info[2]; + ep->adapter_info[3] = asc_dvc_varp->cfg->adapter_info[3]; + ep->adapter_info[4] = asc_dvc_varp->cfg->adapter_info[4]; + ep->adapter_info[5] = asc_dvc_varp->cfg->adapter_info[5]; + + /* + * Modify board configuration. + */ + ASC_DBG(2, "AscInitSetConfig()\n"); + ret = AscInitSetConfig(pdev, shost) ? -ENODEV : 0; + if (ret) + goto err_unmap; + } else { + ADVEEP_3550_CONFIG *ep_3550; + ADVEEP_38C0800_CONFIG *ep_38C0800; + ADVEEP_38C1600_CONFIG *ep_38C1600; + + /* + * Save Wide EEP Configuration Information. + */ + if (adv_dvc_varp->chip_type == ADV_CHIP_ASC3550) { + ep_3550 = &boardp->eep_config.adv_3550_eep; + + ep_3550->adapter_scsi_id = adv_dvc_varp->chip_scsi_id; + ep_3550->max_host_qng = adv_dvc_varp->max_host_qng; + ep_3550->max_dvc_qng = adv_dvc_varp->max_dvc_qng; + ep_3550->termination = adv_dvc_varp->cfg->termination; + ep_3550->disc_enable = adv_dvc_varp->cfg->disc_enable; + ep_3550->bios_ctrl = adv_dvc_varp->bios_ctrl; + ep_3550->wdtr_able = adv_dvc_varp->wdtr_able; + ep_3550->sdtr_able = adv_dvc_varp->sdtr_able; + ep_3550->ultra_able = adv_dvc_varp->ultra_able; + ep_3550->tagqng_able = adv_dvc_varp->tagqng_able; + ep_3550->start_motor = adv_dvc_varp->start_motor; + ep_3550->scsi_reset_delay = + adv_dvc_varp->scsi_reset_wait; + ep_3550->serial_number_word1 = + adv_dvc_varp->cfg->serial1; + ep_3550->serial_number_word2 = + adv_dvc_varp->cfg->serial2; + ep_3550->serial_number_word3 = + adv_dvc_varp->cfg->serial3; + } else if (adv_dvc_varp->chip_type == ADV_CHIP_ASC38C0800) { + ep_38C0800 = &boardp->eep_config.adv_38C0800_eep; + + ep_38C0800->adapter_scsi_id = + adv_dvc_varp->chip_scsi_id; + ep_38C0800->max_host_qng = adv_dvc_varp->max_host_qng; + ep_38C0800->max_dvc_qng = adv_dvc_varp->max_dvc_qng; + ep_38C0800->termination_lvd = + adv_dvc_varp->cfg->termination; + ep_38C0800->disc_enable = + adv_dvc_varp->cfg->disc_enable; + ep_38C0800->bios_ctrl = adv_dvc_varp->bios_ctrl; + ep_38C0800->wdtr_able = adv_dvc_varp->wdtr_able; + ep_38C0800->tagqng_able = adv_dvc_varp->tagqng_able; + ep_38C0800->sdtr_speed1 = adv_dvc_varp->sdtr_speed1; + ep_38C0800->sdtr_speed2 = adv_dvc_varp->sdtr_speed2; + ep_38C0800->sdtr_speed3 = adv_dvc_varp->sdtr_speed3; + ep_38C0800->sdtr_speed4 = adv_dvc_varp->sdtr_speed4; + ep_38C0800->tagqng_able = adv_dvc_varp->tagqng_able; + ep_38C0800->start_motor = adv_dvc_varp->start_motor; + ep_38C0800->scsi_reset_delay = + adv_dvc_varp->scsi_reset_wait; + ep_38C0800->serial_number_word1 = + adv_dvc_varp->cfg->serial1; + ep_38C0800->serial_number_word2 = + adv_dvc_varp->cfg->serial2; + ep_38C0800->serial_number_word3 = + adv_dvc_varp->cfg->serial3; + } else { + ep_38C1600 = &boardp->eep_config.adv_38C1600_eep; + + ep_38C1600->adapter_scsi_id = + adv_dvc_varp->chip_scsi_id; + ep_38C1600->max_host_qng = adv_dvc_varp->max_host_qng; + ep_38C1600->max_dvc_qng = adv_dvc_varp->max_dvc_qng; + ep_38C1600->termination_lvd = + adv_dvc_varp->cfg->termination; + ep_38C1600->disc_enable = + adv_dvc_varp->cfg->disc_enable; + ep_38C1600->bios_ctrl = adv_dvc_varp->bios_ctrl; + ep_38C1600->wdtr_able = adv_dvc_varp->wdtr_able; + ep_38C1600->tagqng_able = adv_dvc_varp->tagqng_able; + ep_38C1600->sdtr_speed1 = adv_dvc_varp->sdtr_speed1; + ep_38C1600->sdtr_speed2 = adv_dvc_varp->sdtr_speed2; + ep_38C1600->sdtr_speed3 = adv_dvc_varp->sdtr_speed3; + ep_38C1600->sdtr_speed4 = adv_dvc_varp->sdtr_speed4; + ep_38C1600->tagqng_able = adv_dvc_varp->tagqng_able; + ep_38C1600->start_motor = adv_dvc_varp->start_motor; + ep_38C1600->scsi_reset_delay = + adv_dvc_varp->scsi_reset_wait; + ep_38C1600->serial_number_word1 = + adv_dvc_varp->cfg->serial1; + ep_38C1600->serial_number_word2 = + adv_dvc_varp->cfg->serial2; + ep_38C1600->serial_number_word3 = + adv_dvc_varp->cfg->serial3; + } + + /* + * Set the adapter's target id bit in the 'init_tidmask' field. + */ + boardp->init_tidmask |= + ADV_TID_TO_TIDMASK(adv_dvc_varp->chip_scsi_id); + } + + /* + * Channels are numbered beginning with 0. For AdvanSys one host + * structure supports one channel. Multi-channel boards have a + * separate host structure for each channel. + */ + shost->max_channel = 0; + if (ASC_NARROW_BOARD(boardp)) { + shost->max_id = ASC_MAX_TID + 1; + shost->max_lun = ASC_MAX_LUN + 1; + shost->max_cmd_len = ASC_MAX_CDB_LEN; + + shost->io_port = asc_dvc_varp->iop_base; + boardp->asc_n_io_port = ASC_IOADR_GAP; + shost->this_id = asc_dvc_varp->cfg->chip_scsi_id; + + /* Set maximum number of queues the adapter can handle. */ + shost->can_queue = asc_dvc_varp->max_total_qng; + } else { + shost->max_id = ADV_MAX_TID + 1; + shost->max_lun = ADV_MAX_LUN + 1; + shost->max_cmd_len = ADV_MAX_CDB_LEN; + + /* + * Save the I/O Port address and length even though + * I/O ports are not used to access Wide boards. + * Instead the Wide boards are accessed with + * PCI Memory Mapped I/O. + */ + shost->io_port = iop; + + shost->this_id = adv_dvc_varp->chip_scsi_id; + + /* Set maximum number of queues the adapter can handle. */ + shost->can_queue = adv_dvc_varp->max_host_qng; + } + + /* + * Following v1.3.89, 'cmd_per_lun' is no longer needed + * and should be set to zero. + * + * But because of a bug introduced in v1.3.89 if the driver is + * compiled as a module and 'cmd_per_lun' is zero, the Mid-Level + * SCSI function 'allocate_device' will panic. To allow the driver + * to work as a module in these kernels set 'cmd_per_lun' to 1. + * + * Note: This is wrong. cmd_per_lun should be set to the depth + * you want on untagged devices always. + #ifdef MODULE + */ + shost->cmd_per_lun = 1; +/* #else + shost->cmd_per_lun = 0; +#endif */ + + /* + * Set the maximum number of scatter-gather elements the + * adapter can handle. + */ + if (ASC_NARROW_BOARD(boardp)) { + /* + * Allow two commands with 'sg_tablesize' scatter-gather + * elements to be executed simultaneously. This value is + * the theoretical hardware limit. It may be decreased + * below. + */ + shost->sg_tablesize = + (((asc_dvc_varp->max_total_qng - 2) / 2) * + ASC_SG_LIST_PER_Q) + 1; + } else { + shost->sg_tablesize = ADV_MAX_SG_LIST; + } + + /* + * The value of 'sg_tablesize' can not exceed the SCSI + * mid-level driver definition of SG_ALL. SG_ALL also + * must not be exceeded, because it is used to define the + * size of the scatter-gather table in 'struct asc_sg_head'. + */ + if (shost->sg_tablesize > SG_ALL) { + shost->sg_tablesize = SG_ALL; + } + + ASC_DBG(1, "sg_tablesize: %d\n", shost->sg_tablesize); + + /* BIOS start address. */ + if (ASC_NARROW_BOARD(boardp)) { + shost->base = AscGetChipBiosAddress(asc_dvc_varp->iop_base, + asc_dvc_varp->bus_type); + } else { + /* + * Fill-in BIOS board variables. The Wide BIOS saves + * information in LRAM that is used by the driver. + */ + AdvReadWordLram(adv_dvc_varp->iop_base, + BIOS_SIGNATURE, boardp->bios_signature); + AdvReadWordLram(adv_dvc_varp->iop_base, + BIOS_VERSION, boardp->bios_version); + AdvReadWordLram(adv_dvc_varp->iop_base, + BIOS_CODESEG, boardp->bios_codeseg); + AdvReadWordLram(adv_dvc_varp->iop_base, + BIOS_CODELEN, boardp->bios_codelen); + + ASC_DBG(1, "bios_signature 0x%x, bios_version 0x%x\n", + boardp->bios_signature, boardp->bios_version); + + ASC_DBG(1, "bios_codeseg 0x%x, bios_codelen 0x%x\n", + boardp->bios_codeseg, boardp->bios_codelen); + + /* + * If the BIOS saved a valid signature, then fill in + * the BIOS code segment base address. + */ + if (boardp->bios_signature == 0x55AA) { + /* + * Convert x86 realmode code segment to a linear + * address by shifting left 4. + */ + shost->base = ((ulong)boardp->bios_codeseg << 4); + } else { + shost->base = 0; + } + } + + /* + * Register Board Resources - I/O Port, DMA, IRQ + */ + + /* Register DMA Channel for Narrow boards. */ + shost->dma_channel = NO_ISA_DMA; /* Default to no ISA DMA. */ +#ifdef CONFIG_ISA + if (ASC_NARROW_BOARD(boardp)) { + /* Register DMA channel for ISA bus. */ + if (asc_dvc_varp->bus_type & ASC_IS_ISA) { + shost->dma_channel = asc_dvc_varp->cfg->isa_dma_channel; + ret = request_dma(shost->dma_channel, DRV_NAME); + if (ret) { + shost_printk(KERN_ERR, shost, "request_dma() " + "%d failed %d\n", + shost->dma_channel, ret); + goto err_unmap; + } + AscEnableIsaDma(shost->dma_channel); + } + } +#endif /* CONFIG_ISA */ + + /* Register IRQ Number. */ + ASC_DBG(2, "request_irq(%d, %p)\n", boardp->irq, shost); + + ret = request_irq(boardp->irq, advansys_interrupt, share_irq, + DRV_NAME, shost); + + if (ret) { + if (ret == -EBUSY) { + shost_printk(KERN_ERR, shost, "request_irq(): IRQ 0x%x " + "already in use\n", boardp->irq); + } else if (ret == -EINVAL) { + shost_printk(KERN_ERR, shost, "request_irq(): IRQ 0x%x " + "not valid\n", boardp->irq); + } else { + shost_printk(KERN_ERR, shost, "request_irq(): IRQ 0x%x " + "failed with %d\n", boardp->irq, ret); + } + goto err_free_dma; + } + + /* + * Initialize board RISC chip and enable interrupts. + */ + if (ASC_NARROW_BOARD(boardp)) { + ASC_DBG(2, "AscInitAsc1000Driver()\n"); + + asc_dvc_varp->overrun_buf = kzalloc(ASC_OVERRUN_BSIZE, GFP_KERNEL); + if (!asc_dvc_varp->overrun_buf) { + ret = -ENOMEM; + goto err_free_irq; + } + warn_code = AscInitAsc1000Driver(asc_dvc_varp); + + if (warn_code || asc_dvc_varp->err_code) { + shost_printk(KERN_ERR, shost, "error: init_state 0x%x, " + "warn 0x%x, error 0x%x\n", + asc_dvc_varp->init_state, warn_code, + asc_dvc_varp->err_code); + if (!asc_dvc_varp->overrun_dma) { + ret = -ENODEV; + goto err_free_mem; + } + } + } else { + if (advansys_wide_init_chip(shost)) { + ret = -ENODEV; + goto err_free_mem; + } + } + + ASC_DBG_PRT_SCSI_HOST(2, shost); + + ret = scsi_add_host(shost, boardp->dev); + if (ret) + goto err_free_mem; + + scsi_scan_host(shost); + return 0; + + err_free_mem: + if (ASC_NARROW_BOARD(boardp)) { + if (asc_dvc_varp->overrun_dma) + dma_unmap_single(boardp->dev, asc_dvc_varp->overrun_dma, + ASC_OVERRUN_BSIZE, DMA_FROM_DEVICE); + kfree(asc_dvc_varp->overrun_buf); + } else + advansys_wide_free_mem(boardp); + err_free_irq: + free_irq(boardp->irq, shost); + err_free_dma: +#ifdef CONFIG_ISA + if (shost->dma_channel != NO_ISA_DMA) + free_dma(shost->dma_channel); +#endif + err_unmap: + if (boardp->ioremap_addr) + iounmap(boardp->ioremap_addr); + err_shost: + return ret; +} + +/* + * advansys_release() + * + * Release resources allocated for a single AdvanSys adapter. + */ +static int advansys_release(struct Scsi_Host *shost) +{ + struct asc_board *board = shost_priv(shost); + ASC_DBG(1, "begin\n"); + scsi_remove_host(shost); + free_irq(board->irq, shost); +#ifdef CONFIG_ISA + if (shost->dma_channel != NO_ISA_DMA) { + ASC_DBG(1, "free_dma()\n"); + free_dma(shost->dma_channel); + } +#endif + if (ASC_NARROW_BOARD(board)) { + dma_unmap_single(board->dev, + board->dvc_var.asc_dvc_var.overrun_dma, + ASC_OVERRUN_BSIZE, DMA_FROM_DEVICE); + kfree(board->dvc_var.asc_dvc_var.overrun_buf); + } else { + iounmap(board->ioremap_addr); + advansys_wide_free_mem(board); + } + scsi_host_put(shost); + ASC_DBG(1, "end\n"); + return 0; +} + +#define ASC_IOADR_TABLE_MAX_IX 11 + +static PortAddr _asc_def_iop_base[ASC_IOADR_TABLE_MAX_IX] = { + 0x100, 0x0110, 0x120, 0x0130, 0x140, 0x0150, 0x0190, + 0x0210, 0x0230, 0x0250, 0x0330 +}; + +/* + * The ISA IRQ number is found in bits 2 and 3 of the CfgLsw. It decodes as: + * 00: 10 + * 01: 11 + * 10: 12 + * 11: 15 + */ +static unsigned int advansys_isa_irq_no(PortAddr iop_base) +{ + unsigned short cfg_lsw = AscGetChipCfgLsw(iop_base); + unsigned int chip_irq = ((cfg_lsw >> 2) & 0x03) + 10; + if (chip_irq == 13) + chip_irq = 15; + return chip_irq; +} + +static int advansys_isa_probe(struct device *dev, unsigned int id) +{ + int err = -ENODEV; + PortAddr iop_base = _asc_def_iop_base[id]; + struct Scsi_Host *shost; + struct asc_board *board; + + if (!request_region(iop_base, ASC_IOADR_GAP, DRV_NAME)) { + ASC_DBG(1, "I/O port 0x%x busy\n", iop_base); + return -ENODEV; + } + ASC_DBG(1, "probing I/O port 0x%x\n", iop_base); + if (!AscFindSignature(iop_base)) + goto release_region; + if (!(AscGetChipVersion(iop_base, ASC_IS_ISA) & ASC_CHIP_VER_ISA_BIT)) + goto release_region; + + err = -ENOMEM; + shost = scsi_host_alloc(&advansys_template, sizeof(*board)); + if (!shost) + goto release_region; + + board = shost_priv(shost); + board->irq = advansys_isa_irq_no(iop_base); + board->dev = dev; + + err = advansys_board_found(shost, iop_base, ASC_IS_ISA); + if (err) + goto free_host; + + dev_set_drvdata(dev, shost); + return 0; + + free_host: + scsi_host_put(shost); + release_region: + release_region(iop_base, ASC_IOADR_GAP); + return err; +} + +static int advansys_isa_remove(struct device *dev, unsigned int id) +{ + int ioport = _asc_def_iop_base[id]; + advansys_release(dev_get_drvdata(dev)); + release_region(ioport, ASC_IOADR_GAP); + return 0; +} + +static struct isa_driver advansys_isa_driver = { + .probe = advansys_isa_probe, + .remove = advansys_isa_remove, + .driver = { + .owner = THIS_MODULE, + .name = DRV_NAME, + }, +}; + +/* + * The VLB IRQ number is found in bits 2 to 4 of the CfgLsw. It decodes as: + * 000: invalid + * 001: 10 + * 010: 11 + * 011: 12 + * 100: invalid + * 101: 14 + * 110: 15 + * 111: invalid + */ +static unsigned int advansys_vlb_irq_no(PortAddr iop_base) +{ + unsigned short cfg_lsw = AscGetChipCfgLsw(iop_base); + unsigned int chip_irq = ((cfg_lsw >> 2) & 0x07) + 9; + if ((chip_irq < 10) || (chip_irq == 13) || (chip_irq > 15)) + return 0; + return chip_irq; +} + +static int advansys_vlb_probe(struct device *dev, unsigned int id) +{ + int err = -ENODEV; + PortAddr iop_base = _asc_def_iop_base[id]; + struct Scsi_Host *shost; + struct asc_board *board; + + if (!request_region(iop_base, ASC_IOADR_GAP, DRV_NAME)) { + ASC_DBG(1, "I/O port 0x%x busy\n", iop_base); + return -ENODEV; + } + ASC_DBG(1, "probing I/O port 0x%x\n", iop_base); + if (!AscFindSignature(iop_base)) + goto release_region; + /* + * I don't think this condition can actually happen, but the old + * driver did it, and the chances of finding a VLB setup in 2007 + * to do testing with is slight to none. + */ + if (AscGetChipVersion(iop_base, ASC_IS_VL) > ASC_CHIP_MAX_VER_VL) + goto release_region; + + err = -ENOMEM; + shost = scsi_host_alloc(&advansys_template, sizeof(*board)); + if (!shost) + goto release_region; + + board = shost_priv(shost); + board->irq = advansys_vlb_irq_no(iop_base); + board->dev = dev; + + err = advansys_board_found(shost, iop_base, ASC_IS_VL); + if (err) + goto free_host; + + dev_set_drvdata(dev, shost); + return 0; + + free_host: + scsi_host_put(shost); + release_region: + release_region(iop_base, ASC_IOADR_GAP); + return -ENODEV; +} + +static struct isa_driver advansys_vlb_driver = { + .probe = advansys_vlb_probe, + .remove = advansys_isa_remove, + .driver = { + .owner = THIS_MODULE, + .name = "advansys_vlb", + }, +}; + +static struct eisa_device_id advansys_eisa_table[] = { + { "ABP7401" }, + { "ABP7501" }, + { "" } +}; + +MODULE_DEVICE_TABLE(eisa, advansys_eisa_table); + +/* + * EISA is a little more tricky than PCI; each EISA device may have two + * channels, and this driver is written to make each channel its own Scsi_Host + */ +struct eisa_scsi_data { + struct Scsi_Host *host[2]; +}; + +/* + * The EISA IRQ number is found in bits 8 to 10 of the CfgLsw. It decodes as: + * 000: 10 + * 001: 11 + * 010: 12 + * 011: invalid + * 100: 14 + * 101: 15 + * 110: invalid + * 111: invalid + */ +static unsigned int advansys_eisa_irq_no(struct eisa_device *edev) +{ + unsigned short cfg_lsw = inw(edev->base_addr + 0xc86); + unsigned int chip_irq = ((cfg_lsw >> 8) & 0x07) + 10; + if ((chip_irq == 13) || (chip_irq > 15)) + return 0; + return chip_irq; +} + +static int advansys_eisa_probe(struct device *dev) +{ + int i, ioport, irq = 0; + int err; + struct eisa_device *edev = to_eisa_device(dev); + struct eisa_scsi_data *data; + + err = -ENOMEM; + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) + goto fail; + ioport = edev->base_addr + 0xc30; + + err = -ENODEV; + for (i = 0; i < 2; i++, ioport += 0x20) { + struct asc_board *board; + struct Scsi_Host *shost; + if (!request_region(ioport, ASC_IOADR_GAP, DRV_NAME)) { + printk(KERN_WARNING "Region %x-%x busy\n", ioport, + ioport + ASC_IOADR_GAP - 1); + continue; + } + if (!AscFindSignature(ioport)) { + release_region(ioport, ASC_IOADR_GAP); + continue; + } + + /* + * I don't know why we need to do this for EISA chips, but + * not for any others. It looks to be equivalent to + * AscGetChipCfgMsw, but I may have overlooked something, + * so I'm not converting it until I get an EISA board to + * test with. + */ + inw(ioport + 4); + + if (!irq) + irq = advansys_eisa_irq_no(edev); + + err = -ENOMEM; + shost = scsi_host_alloc(&advansys_template, sizeof(*board)); + if (!shost) + goto release_region; + + board = shost_priv(shost); + board->irq = irq; + board->dev = dev; + + err = advansys_board_found(shost, ioport, ASC_IS_EISA); + if (!err) { + data->host[i] = shost; + continue; + } + + scsi_host_put(shost); + release_region: + release_region(ioport, ASC_IOADR_GAP); + break; + } + + if (err) + goto free_data; + dev_set_drvdata(dev, data); + return 0; + + free_data: + kfree(data->host[0]); + kfree(data->host[1]); + kfree(data); + fail: + return err; +} + +static int advansys_eisa_remove(struct device *dev) +{ + int i; + struct eisa_scsi_data *data = dev_get_drvdata(dev); + + for (i = 0; i < 2; i++) { + int ioport; + struct Scsi_Host *shost = data->host[i]; + if (!shost) + continue; + ioport = shost->io_port; + advansys_release(shost); + release_region(ioport, ASC_IOADR_GAP); + } + + kfree(data); + return 0; +} + +static struct eisa_driver advansys_eisa_driver = { + .id_table = advansys_eisa_table, + .driver = { + .name = DRV_NAME, + .probe = advansys_eisa_probe, + .remove = advansys_eisa_remove, + } +}; + +/* PCI Devices supported by this driver */ +static struct pci_device_id advansys_pci_tbl[] = { + {PCI_VENDOR_ID_ASP, PCI_DEVICE_ID_ASP_1200A, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_ASP, PCI_DEVICE_ID_ASP_ABP940, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_ASP, PCI_DEVICE_ID_ASP_ABP940U, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_ASP, PCI_DEVICE_ID_ASP_ABP940UW, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_ASP, PCI_DEVICE_ID_38C0800_REV1, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_ASP, PCI_DEVICE_ID_38C1600_REV1, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {} +}; + +MODULE_DEVICE_TABLE(pci, advansys_pci_tbl); + +static void advansys_set_latency(struct pci_dev *pdev) +{ + if ((pdev->device == PCI_DEVICE_ID_ASP_1200A) || + (pdev->device == PCI_DEVICE_ID_ASP_ABP940)) { + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0); + } else { + u8 latency; + pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &latency); + if (latency < 0x20) + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x20); + } +} + +static int advansys_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + int err, ioport; + struct Scsi_Host *shost; + struct asc_board *board; + + err = pci_enable_device(pdev); + if (err) + goto fail; + err = pci_request_regions(pdev, DRV_NAME); + if (err) + goto disable_device; + pci_set_master(pdev); + advansys_set_latency(pdev); + + err = -ENODEV; + if (pci_resource_len(pdev, 0) == 0) + goto release_region; + + ioport = pci_resource_start(pdev, 0); + + err = -ENOMEM; + shost = scsi_host_alloc(&advansys_template, sizeof(*board)); + if (!shost) + goto release_region; + + board = shost_priv(shost); + board->irq = pdev->irq; + board->dev = &pdev->dev; + + if (pdev->device == PCI_DEVICE_ID_ASP_ABP940UW || + pdev->device == PCI_DEVICE_ID_38C0800_REV1 || + pdev->device == PCI_DEVICE_ID_38C1600_REV1) { + board->flags |= ASC_IS_WIDE_BOARD; + } + + err = advansys_board_found(shost, ioport, ASC_IS_PCI); + if (err) + goto free_host; + + pci_set_drvdata(pdev, shost); + return 0; + + free_host: + scsi_host_put(shost); + release_region: + pci_release_regions(pdev); + disable_device: + pci_disable_device(pdev); + fail: + return err; +} + +static void advansys_pci_remove(struct pci_dev *pdev) +{ + advansys_release(pci_get_drvdata(pdev)); + pci_release_regions(pdev); + pci_disable_device(pdev); +} + +static struct pci_driver advansys_pci_driver = { + .name = DRV_NAME, + .id_table = advansys_pci_tbl, + .probe = advansys_pci_probe, + .remove = advansys_pci_remove, +}; + +static int __init advansys_init(void) +{ + int error; + + error = isa_register_driver(&advansys_isa_driver, + ASC_IOADR_TABLE_MAX_IX); + if (error) + goto fail; + + error = isa_register_driver(&advansys_vlb_driver, + ASC_IOADR_TABLE_MAX_IX); + if (error) + goto unregister_isa; + + error = eisa_driver_register(&advansys_eisa_driver); + if (error) + goto unregister_vlb; + + error = pci_register_driver(&advansys_pci_driver); + if (error) + goto unregister_eisa; + + return 0; + + unregister_eisa: + eisa_driver_unregister(&advansys_eisa_driver); + unregister_vlb: + isa_unregister_driver(&advansys_vlb_driver); + unregister_isa: + isa_unregister_driver(&advansys_isa_driver); + fail: + return error; +} + +static void __exit advansys_exit(void) +{ + pci_unregister_driver(&advansys_pci_driver); + eisa_driver_unregister(&advansys_eisa_driver); + isa_unregister_driver(&advansys_vlb_driver); + isa_unregister_driver(&advansys_isa_driver); +} + +module_init(advansys_init); +module_exit(advansys_exit); + +MODULE_LICENSE("GPL"); +MODULE_FIRMWARE("advansys/mcode.bin"); +MODULE_FIRMWARE("advansys/3550.bin"); +MODULE_FIRMWARE("advansys/38C0800.bin"); +MODULE_FIRMWARE("advansys/38C1600.bin"); |