diff options
Diffstat (limited to 'kernel/drivers/scsi/a100u2w.h')
| -rw-r--r-- | kernel/drivers/scsi/a100u2w.h | 371 |
1 files changed, 371 insertions, 0 deletions
diff --git a/kernel/drivers/scsi/a100u2w.h b/kernel/drivers/scsi/a100u2w.h new file mode 100644 index 000000000..d40e0c528 --- /dev/null +++ b/kernel/drivers/scsi/a100u2w.h @@ -0,0 +1,371 @@ +/* + * Initio A100 device driver for Linux. + * + * Copyright (c) 1994-1998 Initio Corporation + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * Revision History: + * 06/18/98 HL, Initial production Version 1.02 + * 12/19/98 bv, Use spinlocks for 2.1.95 and up + * 06/25/02 Doug Ledford <dledford@redhat.com> + * - This and the i60uscsi.h file are almost identical, + * merged them into a single header used by both .c files. + * 14/06/07 Alan Cox <alan@redhat.com> + * - Grand cleanup and Linuxisation + */ + +#define inia100_REVID "Initio INI-A100U2W SCSI device driver; Revision: 1.02d" + +#if 1 +#define ORC_MAXQUEUE 245 +#define ORC_MAXTAGS 64 +#else +#define ORC_MAXQUEUE 25 +#define ORC_MAXTAGS 8 +#endif + +#define TOTAL_SG_ENTRY 32 +#define MAX_TARGETS 16 +#define IMAX_CDB 15 +#define SENSE_SIZE 14 + +/************************************************************************/ +/* Scatter-Gather Element Structure */ +/************************************************************************/ +struct orc_sgent { + u32 base; /* Data Pointer */ + u32 length; /* Data Length */ +}; + +/* SCSI related definition */ +#define DISC_NOT_ALLOW 0x80 /* Disconnect is not allowed */ +#define DISC_ALLOW 0xC0 /* Disconnect is allowed */ + + +#define ORC_OFFSET_SCB 16 +#define ORC_MAX_SCBS 250 +#define MAX_CHANNELS 2 +#define MAX_ESCB_ELE 64 +#define TCF_DRV_255_63 0x0400 + +/********************************************************/ +/* Orchid Host Command Set */ +/********************************************************/ +#define ORC_CMD_NOP 0x00 /* Host command - NOP */ +#define ORC_CMD_VERSION 0x01 /* Host command - Get F/W version */ +#define ORC_CMD_ECHO 0x02 /* Host command - ECHO */ +#define ORC_CMD_SET_NVM 0x03 /* Host command - Set NVRAM */ +#define ORC_CMD_GET_NVM 0x04 /* Host command - Get NVRAM */ +#define ORC_CMD_GET_BUS_STATUS 0x05 /* Host command - Get SCSI bus status */ +#define ORC_CMD_ABORT_SCB 0x06 /* Host command - Abort SCB */ +#define ORC_CMD_ISSUE_SCB 0x07 /* Host command - Issue SCB */ + +/********************************************************/ +/* Orchid Register Set */ +/********************************************************/ +#define ORC_GINTS 0xA0 /* Global Interrupt Status */ +#define QINT 0x04 /* Reply Queue Interrupt */ +#define ORC_GIMSK 0xA1 /* Global Interrupt MASK */ +#define MQINT 0x04 /* Mask Reply Queue Interrupt */ +#define ORC_GCFG 0xA2 /* Global Configure */ +#define EEPRG 0x01 /* Enable EEPROM programming */ +#define ORC_GSTAT 0xA3 /* Global status */ +#define WIDEBUS 0x10 /* Wide SCSI Devices connected */ +#define ORC_HDATA 0xA4 /* Host Data */ +#define ORC_HCTRL 0xA5 /* Host Control */ +#define SCSIRST 0x80 /* SCSI bus reset */ +#define HDO 0x40 /* Host data out */ +#define HOSTSTOP 0x02 /* Host stop RISC engine */ +#define DEVRST 0x01 /* Device reset */ +#define ORC_HSTUS 0xA6 /* Host Status */ +#define HDI 0x02 /* Host data in */ +#define RREADY 0x01 /* RISC engine is ready to receive */ +#define ORC_NVRAM 0xA7 /* Nvram port address */ +#define SE2CS 0x008 +#define SE2CLK 0x004 +#define SE2DO 0x002 +#define SE2DI 0x001 +#define ORC_PQUEUE 0xA8 /* Posting queue FIFO */ +#define ORC_PQCNT 0xA9 /* Posting queue FIFO Cnt */ +#define ORC_RQUEUE 0xAA /* Reply queue FIFO */ +#define ORC_RQUEUECNT 0xAB /* Reply queue FIFO Cnt */ +#define ORC_FWBASEADR 0xAC /* Firmware base address */ + +#define ORC_EBIOSADR0 0xB0 /* External Bios address */ +#define ORC_EBIOSADR1 0xB1 /* External Bios address */ +#define ORC_EBIOSADR2 0xB2 /* External Bios address */ +#define ORC_EBIOSDATA 0xB3 /* External Bios address */ + +#define ORC_SCBSIZE 0xB7 /* SCB size register */ +#define ORC_SCBBASE0 0xB8 /* SCB base address 0 */ +#define ORC_SCBBASE1 0xBC /* SCB base address 1 */ + +#define ORC_RISCCTL 0xE0 /* RISC Control */ +#define PRGMRST 0x002 +#define DOWNLOAD 0x001 +#define ORC_PRGMCTR0 0xE2 /* RISC program counter */ +#define ORC_PRGMCTR1 0xE3 /* RISC program counter */ +#define ORC_RISCRAM 0xEC /* RISC RAM data port 4 bytes */ + +struct orc_extended_scb { /* Extended SCB */ + struct orc_sgent sglist[TOTAL_SG_ENTRY]; /*0 Start of SG list */ + struct scsi_cmnd *srb; /*50 SRB Pointer */ +}; + +/*********************************************************************** + SCSI Control Block + + 0x40 bytes long, the last 8 are user bytes +************************************************************************/ +struct orc_scb { /* Scsi_Ctrl_Blk */ + u8 opcode; /*00 SCB command code&residual */ + u8 flags; /*01 SCB Flags */ + u8 target; /*02 Target Id */ + u8 lun; /*03 Lun */ + u32 reserved0; /*04 Reserved for ORCHID must 0 */ + u32 xferlen; /*08 Data Transfer Length */ + u32 reserved1; /*0C Reserved for ORCHID must 0 */ + u32 sg_len; /*10 SG list # * 8 */ + u32 sg_addr; /*14 SG List Buf physical Addr */ + u32 sg_addrhigh; /*18 SG Buffer high physical Addr */ + u8 hastat; /*1C Host Status */ + u8 tastat; /*1D Target Status */ + u8 status; /*1E SCB status */ + u8 link; /*1F Link pointer, default 0xFF */ + u8 sense_len; /*20 Sense Allocation Length */ + u8 cdb_len; /*21 CDB Length */ + u8 ident; /*22 Identify */ + u8 tag_msg; /*23 Tag Message */ + u8 cdb[IMAX_CDB]; /*24 SCSI CDBs */ + u8 scbidx; /*3C Index for this ORCSCB */ + u32 sense_addr; /*34 Sense Buffer physical Addr */ + + struct orc_extended_scb *escb; /*38 Extended SCB Pointer */ + /* 64bit pointer or 32bit pointer + reserved ? */ +#ifndef CONFIG_64BIT + u8 reserved2[4]; /*3E Reserved for Driver use */ +#endif +}; + +/* Opcodes of ORCSCB_Opcode */ +#define ORC_EXECSCSI 0x00 /* SCSI initiator command with residual */ +#define ORC_BUSDEVRST 0x01 /* SCSI Bus Device Reset */ + +/* Status of ORCSCB_Status */ +#define ORCSCB_COMPLETE 0x00 /* SCB request completed */ +#define ORCSCB_POST 0x01 /* SCB is posted by the HOST */ + +/* Bit Definition for ORCSCB_Flags */ +#define SCF_DISINT 0x01 /* Disable HOST interrupt */ +#define SCF_DIR 0x18 /* Direction bits */ +#define SCF_NO_DCHK 0x00 /* Direction determined by SCSI */ +#define SCF_DIN 0x08 /* From Target to Initiator */ +#define SCF_DOUT 0x10 /* From Initiator to Target */ +#define SCF_NO_XF 0x18 /* No data transfer */ +#define SCF_POLL 0x40 + +/* Error Codes for ORCSCB_HaStat */ +#define HOST_SEL_TOUT 0x11 +#define HOST_DO_DU 0x12 +#define HOST_BUS_FREE 0x13 +#define HOST_BAD_PHAS 0x14 +#define HOST_INV_CMD 0x16 +#define HOST_SCSI_RST 0x1B +#define HOST_DEV_RST 0x1C + + +/* Error Codes for ORCSCB_TaStat */ +#define TARGET_CHK_COND 0x02 +#define TARGET_BUSY 0x08 +#define TARGET_TAG_FULL 0x28 + + +/*********************************************************************** + Target Device Control Structure +**********************************************************************/ + +struct orc_target { + u8 TCS_DrvDASD; /* 6 */ + u8 TCS_DrvSCSI; /* 7 */ + u8 TCS_DrvHead; /* 8 */ + u16 TCS_DrvFlags; /* 4 */ + u8 TCS_DrvSector; /* 7 */ +}; + +/* Bit Definition for TCF_DrvFlags */ +#define TCS_DF_NODASD_SUPT 0x20 /* Suppress OS/2 DASD Mgr support */ +#define TCS_DF_NOSCSI_SUPT 0x40 /* Suppress OS/2 SCSI Mgr support */ + + +/*********************************************************************** + Host Adapter Control Structure +************************************************************************/ +struct orc_host { + unsigned long base; /* Base address */ + u8 index; /* Index (Channel)*/ + u8 scsi_id; /* H/A SCSI ID */ + u8 BIOScfg; /*BIOS configuration */ + u8 flags; + u8 max_targets; /* SCSI0MAXTags */ + struct orc_scb *scb_virt; /* Virtual Pointer to SCB array */ + dma_addr_t scb_phys; /* Scb Physical address */ + struct orc_extended_scb *escb_virt; /* Virtual pointer to ESCB Scatter list */ + dma_addr_t escb_phys; /* scatter list Physical address */ + u8 target_flag[16]; /* target configuration, TCF_EN_TAG */ + u8 max_tags[16]; /* ORC_MAX_SCBS */ + u32 allocation_map[MAX_CHANNELS][8]; /* Max STB is 256, So 256/32 */ + spinlock_t allocation_lock; + struct pci_dev *pdev; +}; + +/* Bit Definition for HCS_Flags */ + +#define HCF_SCSI_RESET 0x01 /* SCSI BUS RESET */ +#define HCF_PARITY 0x02 /* parity card */ +#define HCF_LVDS 0x10 /* parity card */ + +/* Bit Definition for TargetFlag */ + +#define TCF_EN_255 0x08 +#define TCF_EN_TAG 0x10 +#define TCF_BUSY 0x20 +#define TCF_DISCONNECT 0x40 +#define TCF_SPIN_UP 0x80 + +/* Bit Definition for HCS_AFlags */ +#define HCS_AF_IGNORE 0x01 /* Adapter ignore */ +#define HCS_AF_DISABLE_RESET 0x10 /* Adapter disable reset */ +#define HCS_AF_DISABLE_ADPT 0x80 /* Adapter disable */ + +struct orc_nvram { +/*----------header ---------------*/ + u8 SubVendorID0; /* 00 - Sub Vendor ID */ + u8 SubVendorID1; /* 00 - Sub Vendor ID */ + u8 SubSysID0; /* 02 - Sub System ID */ + u8 SubSysID1; /* 02 - Sub System ID */ + u8 SubClass; /* 04 - Sub Class */ + u8 VendorID0; /* 05 - Vendor ID */ + u8 VendorID1; /* 05 - Vendor ID */ + u8 DeviceID0; /* 07 - Device ID */ + u8 DeviceID1; /* 07 - Device ID */ + u8 Reserved0[2]; /* 09 - Reserved */ + u8 revision; /* 0B - revision of data structure */ + /* ----Host Adapter Structure ---- */ + u8 NumOfCh; /* 0C - Number of SCSI channel */ + u8 BIOSConfig1; /* 0D - BIOS configuration 1 */ + u8 BIOSConfig2; /* 0E - BIOS boot channel&target ID */ + u8 BIOSConfig3; /* 0F - BIOS configuration 3 */ + /* ----SCSI channel Structure ---- */ + /* from "CTRL-I SCSI Host Adapter SetUp menu " */ + u8 scsi_id; /* 10 - Channel 0 SCSI ID */ + u8 SCSI0Config; /* 11 - Channel 0 SCSI configuration */ + u8 SCSI0MaxTags; /* 12 - Channel 0 Maximum tags */ + u8 SCSI0ResetTime; /* 13 - Channel 0 Reset recovering time */ + u8 ReservedforChannel0[2]; /* 14 - Reserved */ + + /* ----SCSI target Structure ---- */ + /* from "CTRL-I SCSI device SetUp menu " */ + u8 Target00Config; /* 16 - Channel 0 Target 0 config */ + u8 Target01Config; /* 17 - Channel 0 Target 1 config */ + u8 Target02Config; /* 18 - Channel 0 Target 2 config */ + u8 Target03Config; /* 19 - Channel 0 Target 3 config */ + u8 Target04Config; /* 1A - Channel 0 Target 4 config */ + u8 Target05Config; /* 1B - Channel 0 Target 5 config */ + u8 Target06Config; /* 1C - Channel 0 Target 6 config */ + u8 Target07Config; /* 1D - Channel 0 Target 7 config */ + u8 Target08Config; /* 1E - Channel 0 Target 8 config */ + u8 Target09Config; /* 1F - Channel 0 Target 9 config */ + u8 Target0AConfig; /* 20 - Channel 0 Target A config */ + u8 Target0BConfig; /* 21 - Channel 0 Target B config */ + u8 Target0CConfig; /* 22 - Channel 0 Target C config */ + u8 Target0DConfig; /* 23 - Channel 0 Target D config */ + u8 Target0EConfig; /* 24 - Channel 0 Target E config */ + u8 Target0FConfig; /* 25 - Channel 0 Target F config */ + + u8 SCSI1Id; /* 26 - Channel 1 SCSI ID */ + u8 SCSI1Config; /* 27 - Channel 1 SCSI configuration */ + u8 SCSI1MaxTags; /* 28 - Channel 1 Maximum tags */ + u8 SCSI1ResetTime; /* 29 - Channel 1 Reset recovering time */ + u8 ReservedforChannel1[2]; /* 2A - Reserved */ + + /* ----SCSI target Structure ---- */ + /* from "CTRL-I SCSI device SetUp menu " */ + u8 Target10Config; /* 2C - Channel 1 Target 0 config */ + u8 Target11Config; /* 2D - Channel 1 Target 1 config */ + u8 Target12Config; /* 2E - Channel 1 Target 2 config */ + u8 Target13Config; /* 2F - Channel 1 Target 3 config */ + u8 Target14Config; /* 30 - Channel 1 Target 4 config */ + u8 Target15Config; /* 31 - Channel 1 Target 5 config */ + u8 Target16Config; /* 32 - Channel 1 Target 6 config */ + u8 Target17Config; /* 33 - Channel 1 Target 7 config */ + u8 Target18Config; /* 34 - Channel 1 Target 8 config */ + u8 Target19Config; /* 35 - Channel 1 Target 9 config */ + u8 Target1AConfig; /* 36 - Channel 1 Target A config */ + u8 Target1BConfig; /* 37 - Channel 1 Target B config */ + u8 Target1CConfig; /* 38 - Channel 1 Target C config */ + u8 Target1DConfig; /* 39 - Channel 1 Target D config */ + u8 Target1EConfig; /* 3A - Channel 1 Target E config */ + u8 Target1FConfig; /* 3B - Channel 1 Target F config */ + u8 reserved[3]; /* 3C - Reserved */ + /* ---------- CheckSum ---------- */ + u8 CheckSum; /* 3F - Checksum of NVRam */ +}; + +/* Bios Configuration for nvram->BIOSConfig1 */ +#define NBC_BIOSENABLE 0x01 /* BIOS enable */ +#define NBC_CDROM 0x02 /* Support bootable CDROM */ +#define NBC_REMOVABLE 0x04 /* Support removable drive */ + +/* Bios Configuration for nvram->BIOSConfig2 */ +#define NBB_TARGET_MASK 0x0F /* Boot SCSI target ID number */ +#define NBB_CHANL_MASK 0xF0 /* Boot SCSI channel number */ + +/* Bit definition for nvram->SCSIConfig */ +#define NCC_BUSRESET 0x01 /* Reset SCSI bus at power up */ +#define NCC_PARITYCHK 0x02 /* SCSI parity enable */ +#define NCC_LVDS 0x10 /* Enable LVDS */ +#define NCC_ACTTERM1 0x20 /* Enable active terminator 1 */ +#define NCC_ACTTERM2 0x40 /* Enable active terminator 2 */ +#define NCC_AUTOTERM 0x80 /* Enable auto termination */ + +/* Bit definition for nvram->TargetxConfig */ +#define NTC_PERIOD 0x07 /* Maximum Sync. Speed */ +#define NTC_1GIGA 0x08 /* 255 head / 63 sectors (64/32) */ +#define NTC_NO_SYNC 0x10 /* NO SYNC. NEGO */ +#define NTC_NO_WIDESYNC 0x20 /* NO WIDE SYNC. NEGO */ +#define NTC_DISC_ENABLE 0x40 /* Enable SCSI disconnect */ +#define NTC_SPINUP 0x80 /* Start disk drive */ + +/* Default NVRam values */ +#define NBC_DEFAULT (NBC_ENABLE) +#define NCC_DEFAULT (NCC_BUSRESET | NCC_AUTOTERM | NCC_PARITYCHK) +#define NCC_MAX_TAGS 0x20 /* Maximum tags per target */ +#define NCC_RESET_TIME 0x0A /* SCSI RESET recovering time */ +#define NTC_DEFAULT (NTC_1GIGA | NTC_NO_WIDESYNC | NTC_DISC_ENABLE) + |