summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/rtc/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/rtc/Kconfig')
-rw-r--r--kernel/drivers/rtc/Kconfig1559
1 files changed, 1559 insertions, 0 deletions
diff --git a/kernel/drivers/rtc/Kconfig b/kernel/drivers/rtc/Kconfig
new file mode 100644
index 000000000..0fe4ad882
--- /dev/null
+++ b/kernel/drivers/rtc/Kconfig
@@ -0,0 +1,1559 @@
+#
+# RTC class/drivers configuration
+#
+
+config RTC_LIB
+ bool
+
+menuconfig RTC_CLASS
+ bool "Real Time Clock"
+ default n
+ depends on !S390 && !UML
+ select RTC_LIB
+ help
+ Generic RTC class support. If you say yes here, you will
+ be allowed to plug one or more RTCs to your system. You will
+ probably want to enable one or more of the interfaces below.
+
+if RTC_CLASS
+
+config RTC_HCTOSYS
+ bool "Set system time from RTC on startup and resume"
+ default y
+ help
+ If you say yes here, the system time (wall clock) will be set using
+ the value read from a specified RTC device. This is useful to avoid
+ unnecessary fsck runs at boot time, and to network better.
+
+config RTC_SYSTOHC
+ bool "Set the RTC time based on NTP synchronization"
+ default y
+ help
+ If you say yes here, the system time (wall clock) will be stored
+ in the RTC specified by RTC_HCTOSYS_DEVICE approximately every 11
+ minutes if userspace reports synchronized NTP status.
+
+config RTC_HCTOSYS_DEVICE
+ string "RTC used to set the system time"
+ depends on RTC_HCTOSYS = y || RTC_SYSTOHC = y
+ default "rtc0"
+ help
+ The RTC device that will be used to (re)initialize the system
+ clock, usually rtc0. Initialization is done when the system
+ starts up, and when it resumes from a low power state. This
+ device should record time in UTC, since the kernel won't do
+ timezone correction.
+
+ The driver for this RTC device must be loaded before late_initcall
+ functions run, so it must usually be statically linked.
+
+ This clock should be battery-backed, so that it reads the correct
+ time when the system boots from a power-off state. Otherwise, your
+ system will need an external clock source (like an NTP server).
+
+ If the clock you specify here is not battery backed, it may still
+ be useful to reinitialize system time when resuming from system
+ sleep states. Do not specify an RTC here unless it stays powered
+ during all this system's supported sleep states.
+
+config RTC_DEBUG
+ bool "RTC debug support"
+ help
+ Say yes here to enable debugging support in the RTC framework
+ and individual RTC drivers.
+
+comment "RTC interfaces"
+
+config RTC_INTF_SYSFS
+ bool "/sys/class/rtc/rtcN (sysfs)"
+ depends on SYSFS
+ default RTC_CLASS
+ help
+ Say yes here if you want to use your RTCs using sysfs interfaces,
+ /sys/class/rtc/rtc0 through /sys/.../rtcN.
+
+ If unsure, say Y.
+
+config RTC_INTF_PROC
+ bool "/proc/driver/rtc (procfs for rtcN)"
+ depends on PROC_FS
+ default RTC_CLASS
+ help
+ Say yes here if you want to use your system clock RTC through
+ the proc interface, /proc/driver/rtc.
+ Other RTCs will not be available through that API.
+ If there is no RTC for the system clock, then the first RTC(rtc0)
+ is used by default.
+
+ If unsure, say Y.
+
+config RTC_INTF_DEV
+ bool "/dev/rtcN (character devices)"
+ default RTC_CLASS
+ help
+ Say yes here if you want to use your RTCs using the /dev
+ interfaces, which "udev" sets up as /dev/rtc0 through
+ /dev/rtcN.
+
+ You may want to set up a symbolic link so one of these
+ can be accessed as /dev/rtc, which is a name
+ expected by "hwclock" and some other programs. Recent
+ versions of "udev" are known to set up the symlink for you.
+
+ If unsure, say Y.
+
+config RTC_INTF_DEV_UIE_EMUL
+ bool "RTC UIE emulation on dev interface"
+ depends on RTC_INTF_DEV
+ help
+ Provides an emulation for RTC_UIE if the underlying rtc chip
+ driver does not expose RTC_UIE ioctls. Those requests generate
+ once-per-second update interrupts, used for synchronization.
+
+ The emulation code will read the time from the hardware
+ clock several times per second, please enable this option
+ only if you know that you really need it.
+
+config RTC_DRV_TEST
+ tristate "Test driver/device"
+ help
+ If you say yes here you get support for the
+ RTC test driver. It's a software RTC which can be
+ used to test the RTC subsystem APIs. It gets
+ the time from the system clock.
+ You want this driver only if you are doing development
+ on the RTC subsystem. Please read the source code
+ for further details.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-test.
+
+comment "I2C RTC drivers"
+ depends on I2C
+
+if I2C
+
+config RTC_DRV_88PM860X
+ tristate "Marvell 88PM860x"
+ depends on I2C && MFD_88PM860X
+ help
+ If you say yes here you get support for RTC function in Marvell
+ 88PM860x chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-88pm860x.
+
+config RTC_DRV_88PM80X
+ tristate "Marvell 88PM80x"
+ depends on I2C && MFD_88PM800
+ help
+ If you say yes here you get support for RTC function in Marvell
+ 88PM80x chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-88pm80x.
+
+config RTC_DRV_ABB5ZES3
+ depends on I2C
+ select REGMAP_I2C
+ tristate "Abracon AB-RTCMC-32.768kHz-B5ZE-S3"
+ help
+ If you say yes here you get support for the Abracon
+ AB-RTCMC-32.768kHz-B5ZE-S3 I2C RTC chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-ab-b5ze-s3.
+
+config RTC_DRV_ABX80X
+ tristate "Abracon ABx80x"
+ help
+ If you say yes here you get support for Abracon AB080X and AB180X
+ families of ultra-low-power battery- and capacitor-backed real-time
+ clock chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-abx80x.
+
+config RTC_DRV_AS3722
+ tristate "ams AS3722 RTC driver"
+ depends on MFD_AS3722
+ help
+ If you say yes here you get support for the RTC of ams AS3722 PMIC
+ chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-as3722.
+
+config RTC_DRV_DS1307
+ tristate "Dallas/Maxim DS1307/37/38/39/40, ST M41T00, EPSON RX-8025"
+ help
+ If you say yes here you get support for various compatible RTC
+ chips (often with battery backup) connected with I2C. This driver
+ should handle DS1307, DS1337, DS1338, DS1339, DS1340, ST M41T00,
+ EPSON RX-8025 and probably other chips. In some cases the RTC
+ must already have been initialized (by manufacturing or a
+ bootloader).
+
+ The first seven registers on these chips hold an RTC, and other
+ registers may add features such as NVRAM, a trickle charger for
+ the RTC/NVRAM backup power, and alarms. NVRAM is visible in
+ sysfs, but other chip features may not be available.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-ds1307.
+
+config RTC_DRV_DS1374
+ tristate "Dallas/Maxim DS1374"
+ depends on I2C
+ help
+ If you say yes here you get support for Dallas Semiconductor
+ DS1374 real-time clock chips. If an interrupt is associated
+ with the device, the alarm functionality is supported.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-ds1374.
+
+config RTC_DRV_DS1374_WDT
+ bool "Dallas/Maxim DS1374 watchdog timer"
+ depends on RTC_DRV_DS1374
+ help
+ If you say Y here you will get support for the
+ watchdog timer in the Dallas Semiconductor DS1374
+ real-time clock chips.
+
+config RTC_DRV_DS1672
+ tristate "Dallas/Maxim DS1672"
+ help
+ If you say yes here you get support for the
+ Dallas/Maxim DS1672 timekeeping chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-ds1672.
+
+config RTC_DRV_DS3232
+ tristate "Dallas/Maxim DS3232"
+ depends on I2C
+ help
+ If you say yes here you get support for Dallas Semiconductor
+ DS3232 real-time clock chips. If an interrupt is associated
+ with the device, the alarm functionality is supported.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-ds3232.
+
+config RTC_DRV_HYM8563
+ tristate "Haoyu Microelectronics HYM8563"
+ depends on I2C && OF
+ help
+ Say Y to enable support for the HYM8563 I2C RTC chip. Apart
+ from the usual rtc functions it provides a clock output of
+ up to 32kHz.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-hym8563.
+
+config RTC_DRV_LP8788
+ tristate "TI LP8788 RTC driver"
+ depends on MFD_LP8788
+ help
+ Say Y to enable support for the LP8788 RTC/ALARM driver.
+
+config RTC_DRV_MAX6900
+ tristate "Maxim MAX6900"
+ help
+ If you say yes here you will get support for the
+ Maxim MAX6900 I2C RTC chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-max6900.
+
+config RTC_DRV_MAX8907
+ tristate "Maxim MAX8907"
+ depends on MFD_MAX8907
+ help
+ If you say yes here you will get support for the
+ RTC of Maxim MAX8907 PMIC.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-max8907.
+
+config RTC_DRV_MAX8925
+ tristate "Maxim MAX8925"
+ depends on MFD_MAX8925
+ help
+ If you say yes here you will get support for the
+ RTC of Maxim MAX8925 PMIC.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-max8925.
+
+config RTC_DRV_MAX8998
+ tristate "Maxim MAX8998"
+ depends on MFD_MAX8998
+ help
+ If you say yes here you will get support for the
+ RTC of Maxim MAX8998 PMIC.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-max8998.
+
+config RTC_DRV_MAX8997
+ tristate "Maxim MAX8997"
+ depends on MFD_MAX8997
+ help
+ If you say yes here you will get support for the
+ RTC of Maxim MAX8997 PMIC.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-max8997.
+
+config RTC_DRV_MAX77686
+ tristate "Maxim MAX77686"
+ depends on MFD_MAX77686
+ help
+ If you say yes here you will get support for the
+ RTC of Maxim MAX77686 PMIC.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-max77686.
+
+config RTC_DRV_RK808
+ tristate "Rockchip RK808 RTC"
+ depends on MFD_RK808
+ help
+ If you say yes here you will get support for the
+ RTC of RK808 PMIC.
+
+ This driver can also be built as a module. If so, the module
+ will be called rk808-rtc.
+
+config RTC_DRV_MAX77802
+ tristate "Maxim 77802 RTC"
+ depends on MFD_MAX77686
+ help
+ If you say yes here you will get support for the
+ RTC of Maxim MAX77802 PMIC.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-max77802.
+
+config RTC_DRV_RS5C372
+ tristate "Ricoh R2025S/D, RS5C372A/B, RV5C386, RV5C387A"
+ help
+ If you say yes here you get support for the
+ Ricoh R2025S/D, RS5C372A, RS5C372B, RV5C386, and RV5C387A RTC chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-rs5c372.
+
+config RTC_DRV_ISL1208
+ tristate "Intersil ISL1208"
+ help
+ If you say yes here you get support for the
+ Intersil ISL1208 RTC chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-isl1208.
+
+config RTC_DRV_ISL12022
+ tristate "Intersil ISL12022"
+ help
+ If you say yes here you get support for the
+ Intersil ISL12022 RTC chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-isl12022.
+
+config RTC_DRV_ISL12057
+ depends on I2C
+ select REGMAP_I2C
+ tristate "Intersil ISL12057"
+ help
+ If you say yes here you get support for the Intersil ISL12057
+ I2C RTC chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-isl12057.
+
+config RTC_DRV_X1205
+ tristate "Xicor/Intersil X1205"
+ help
+ If you say yes here you get support for the
+ Xicor/Intersil X1205 RTC chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-x1205.
+
+config RTC_DRV_PALMAS
+ tristate "TI Palmas RTC driver"
+ depends on MFD_PALMAS
+ help
+ If you say yes here you get support for the RTC of TI PALMA series PMIC
+ chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-palma.
+
+config RTC_DRV_PCF2127
+ tristate "NXP PCF2127"
+ help
+ If you say yes here you get support for the NXP PCF2127/29 RTC
+ chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-pcf2127.
+
+config RTC_DRV_PCF8523
+ tristate "NXP PCF8523"
+ help
+ If you say yes here you get support for the NXP PCF8523 RTC
+ chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-pcf8523.
+
+config RTC_DRV_PCF8563
+ tristate "Philips PCF8563/Epson RTC8564"
+ help
+ If you say yes here you get support for the
+ Philips PCF8563 RTC chip. The Epson RTC8564
+ should work as well.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-pcf8563.
+
+config RTC_DRV_PCF85063
+ tristate "nxp PCF85063"
+ help
+ If you say yes here you get support for the PCF85063 RTC chip
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-pcf85063.
+
+config RTC_DRV_PCF8583
+ tristate "Philips PCF8583"
+ help
+ If you say yes here you get support for the Philips PCF8583
+ RTC chip found on Acorn RiscPCs. This driver supports the
+ platform specific method of retrieving the current year from
+ the RTC's SRAM. It will work on other platforms with the same
+ chip, but the year will probably have to be tweaked.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-pcf8583.
+
+config RTC_DRV_M41T80
+ tristate "ST M41T62/65/M41T80/81/82/83/84/85/87 and compatible"
+ help
+ If you say Y here you will get support for the ST M41T60
+ and M41T80 RTC chips series. Currently, the following chips are
+ supported: M41T62, M41T65, M41T80, M41T81, M41T82, M41T83, M41ST84,
+ M41ST85, M41ST87, and MicroCrystal RV4162.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-m41t80.
+
+config RTC_DRV_M41T80_WDT
+ bool "ST M41T65/M41T80 series RTC watchdog timer"
+ depends on RTC_DRV_M41T80
+ help
+ If you say Y here you will get support for the
+ watchdog timer in the ST M41T60 and M41T80 RTC chips series.
+
+config RTC_DRV_BQ32K
+ tristate "TI BQ32000"
+ help
+ If you say Y here you will get support for the TI
+ BQ32000 I2C RTC chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-bq32k.
+
+config RTC_DRV_DM355EVM
+ tristate "TI DaVinci DM355 EVM RTC"
+ depends on MFD_DM355EVM_MSP
+ help
+ Supports the RTC firmware in the MSP430 on the DM355 EVM.
+
+config RTC_DRV_TWL92330
+ bool "TI TWL92330/Menelaus"
+ depends on MENELAUS
+ help
+ If you say yes here you get support for the RTC on the
+ TWL92330 "Menelaus" power management chip, used with OMAP2
+ platforms. The support is integrated with the rest of
+ the Menelaus driver; it's not separate module.
+
+config RTC_DRV_TWL4030
+ tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0"
+ depends on TWL4030_CORE
+ help
+ If you say yes here you get support for the RTC on the
+ TWL4030/TWL5030/TWL6030 family chips, used mostly with OMAP3 platforms.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-twl.
+
+config RTC_DRV_TPS6586X
+ tristate "TI TPS6586X RTC driver"
+ depends on MFD_TPS6586X
+ help
+ TI Power Management IC TPS6586X supports RTC functionality
+ along with alarm. This driver supports the RTC driver for
+ the TPS6586X RTC module.
+
+config RTC_DRV_TPS65910
+ tristate "TI TPS65910 RTC driver"
+ depends on RTC_CLASS && MFD_TPS65910
+ help
+ If you say yes here you get support for the RTC on the
+ TPS65910 chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-tps65910.
+
+config RTC_DRV_TPS80031
+ tristate "TI TPS80031/TPS80032 RTC driver"
+ depends on MFD_TPS80031
+ help
+ TI Power Management IC TPS80031 supports RTC functionality
+ along with alarm. This driver supports the RTC driver for
+ the TPS80031 RTC module.
+
+config RTC_DRV_RC5T583
+ tristate "RICOH 5T583 RTC driver"
+ depends on MFD_RC5T583
+ help
+ If you say yes here you get support for the RTC on the
+ RICOH 5T583 chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-rc5t583.
+
+config RTC_DRV_S35390A
+ tristate "Seiko Instruments S-35390A"
+ select BITREVERSE
+ help
+ If you say yes here you will get support for the Seiko
+ Instruments S-35390A.
+
+ This driver can also be built as a module. If so the module
+ will be called rtc-s35390a.
+
+config RTC_DRV_FM3130
+ tristate "Ramtron FM3130"
+ help
+ If you say Y here you will get support for the
+ Ramtron FM3130 RTC chips.
+ Ramtron FM3130 is a chip with two separate devices inside,
+ RTC clock and FRAM. This driver provides only RTC functionality.
+
+ This driver can also be built as a module. If so the module
+ will be called rtc-fm3130.
+
+config RTC_DRV_RX8581
+ tristate "Epson RX-8581"
+ help
+ If you say yes here you will get support for the Epson RX-8581.
+
+ This driver can also be built as a module. If so the module
+ will be called rtc-rx8581.
+
+config RTC_DRV_RX8025
+ tristate "Epson RX-8025SA/NB"
+ help
+ If you say yes here you get support for the Epson
+ RX-8025SA/NB RTC chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-rx8025.
+
+config RTC_DRV_EM3027
+ tristate "EM Microelectronic EM3027"
+ help
+ If you say yes here you get support for the EM
+ Microelectronic EM3027 RTC chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-em3027.
+
+config RTC_DRV_RV3029C2
+ tristate "Micro Crystal RTC"
+ help
+ If you say yes here you get support for the Micro Crystal
+ RV3029-C2 RTC chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-rv3029c2.
+
+config RTC_DRV_S5M
+ tristate "Samsung S2M/S5M series"
+ depends on MFD_SEC_CORE
+ help
+ If you say yes here you will get support for the
+ RTC of Samsung S2MPS14 and S5M PMIC series.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-s5m.
+
+endif # I2C
+
+comment "SPI RTC drivers"
+
+if SPI_MASTER
+
+config RTC_DRV_M41T93
+ tristate "ST M41T93"
+ help
+ If you say yes here you will get support for the
+ ST M41T93 SPI RTC chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-m41t93.
+
+config RTC_DRV_M41T94
+ tristate "ST M41T94"
+ help
+ If you say yes here you will get support for the
+ ST M41T94 SPI RTC chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-m41t94.
+
+config RTC_DRV_DS1305
+ tristate "Dallas/Maxim DS1305/DS1306"
+ help
+ Select this driver to get support for the Dallas/Maxim DS1305
+ and DS1306 real time clock chips. These support a trickle
+ charger, alarms, and NVRAM in addition to the clock.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-ds1305.
+
+config RTC_DRV_DS1343
+ select REGMAP_SPI
+ tristate "Dallas/Maxim DS1343/DS1344"
+ help
+ If you say yes here you get support for the
+ Dallas/Maxim DS1343 and DS1344 real time clock chips.
+ Support for trickle charger, alarm is provided.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-ds1343.
+
+config RTC_DRV_DS1347
+ tristate "Dallas/Maxim DS1347"
+ help
+ If you say yes here you get support for the
+ Dallas/Maxim DS1347 chips.
+
+ This driver only supports the RTC feature, and not other chip
+ features such as alarms.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-ds1347.
+
+config RTC_DRV_DS1390
+ tristate "Dallas/Maxim DS1390/93/94"
+ help
+ If you say yes here you get support for the
+ Dallas/Maxim DS1390/93/94 chips.
+
+ This driver only supports the RTC feature, and not other chip
+ features such as alarms and trickle charging.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-ds1390.
+
+config RTC_DRV_MAX6902
+ tristate "Maxim MAX6902"
+ help
+ If you say yes here you will get support for the
+ Maxim MAX6902 SPI RTC chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-max6902.
+
+config RTC_DRV_R9701
+ tristate "Epson RTC-9701JE"
+ help
+ If you say yes here you will get support for the
+ Epson RTC-9701JE SPI RTC chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-r9701.
+
+config RTC_DRV_RS5C348
+ tristate "Ricoh RS5C348A/B"
+ help
+ If you say yes here you get support for the
+ Ricoh RS5C348A and RS5C348B RTC chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-rs5c348.
+
+config RTC_DRV_DS3234
+ tristate "Maxim/Dallas DS3234"
+ help
+ If you say yes here you get support for the
+ Maxim/Dallas DS3234 SPI RTC chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-ds3234.
+
+config RTC_DRV_PCF2123
+ tristate "NXP PCF2123"
+ help
+ If you say yes here you get support for the NXP PCF2123
+ RTC chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-pcf2123.
+
+config RTC_DRV_RX4581
+ tristate "Epson RX-4581"
+ help
+ If you say yes here you will get support for the Epson RX-4581.
+
+ This driver can also be built as a module. If so the module
+ will be called rtc-rx4581.
+
+config RTC_DRV_MCP795
+ tristate "Microchip MCP795"
+ help
+ If you say yes here you will get support for the Microchip MCP795.
+
+ This driver can also be built as a module. If so the module
+ will be called rtc-mcp795.
+
+endif # SPI_MASTER
+
+comment "Platform RTC drivers"
+
+# this 'CMOS' RTC driver is arch dependent because <asm-generic/rtc.h>
+# requires <asm/mc146818rtc.h> defining CMOS_READ/CMOS_WRITE, and a
+# global rtc_lock ... it's not yet just another platform_device.
+
+config RTC_DRV_CMOS
+ tristate "PC-style 'CMOS'"
+ depends on X86 || ARM || M32R || PPC || MIPS || SPARC64
+ default y if X86
+ help
+ Say "yes" here to get direct support for the real time clock
+ found in every PC or ACPI-based system, and some other boards.
+ Specifically the original MC146818, compatibles like those in
+ PC south bridges, the DS12887 or M48T86, some multifunction
+ or LPC bus chips, and so on.
+
+ Your system will need to define the platform device used by
+ this driver, otherwise it won't be accessible. This means
+ you can safely enable this driver if you don't know whether
+ or not your board has this kind of hardware.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-cmos.
+
+config RTC_DRV_ALPHA
+ bool "Alpha PC-style CMOS"
+ depends on ALPHA
+ default y
+ help
+ Direct support for the real-time clock found on every Alpha
+ system, specifically MC146818 compatibles. If in doubt, say Y.
+
+config RTC_DRV_VRTC
+ tristate "Virtual RTC for Intel MID platforms"
+ depends on X86_INTEL_MID
+ default y if X86_INTEL_MID
+
+ help
+ Say "yes" here to get direct support for the real time clock
+ found on Moorestown platforms. The VRTC is a emulated RTC that
+ derives its clock source from a real RTC in the PMIC. The MC146818
+ style programming interface is mostly conserved, but any
+ updates are done via IPC calls to the system controller FW.
+
+config RTC_DRV_DS1216
+ tristate "Dallas DS1216"
+ depends on SNI_RM
+ help
+ If you say yes here you get support for the Dallas DS1216 RTC chips.
+
+config RTC_DRV_DS1286
+ tristate "Dallas DS1286"
+ depends on HAS_IOMEM
+ help
+ If you say yes here you get support for the Dallas DS1286 RTC chips.
+
+config RTC_DRV_DS1302
+ tristate "Dallas DS1302"
+ depends on SH_SECUREEDGE5410
+ help
+ If you say yes here you get support for the Dallas DS1302 RTC chips.
+
+config RTC_DRV_DS1511
+ tristate "Dallas DS1511"
+ depends on HAS_IOMEM
+ help
+ If you say yes here you get support for the
+ Dallas DS1511 timekeeping/watchdog chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-ds1511.
+
+config RTC_DRV_DS1553
+ tristate "Maxim/Dallas DS1553"
+ depends on HAS_IOMEM
+ help
+ If you say yes here you get support for the
+ Maxim/Dallas DS1553 timekeeping chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-ds1553.
+
+config RTC_DRV_DS1685_FAMILY
+ tristate "Dallas/Maxim DS1685 Family"
+ help
+ If you say yes here you get support for the Dallas/Maxim DS1685
+ family of real time chips. This family includes the DS1685/DS1687,
+ DS1689/DS1693, DS17285/DS17287, DS17485/DS17487, and
+ DS17885/DS17887 chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-ds1685.
+
+choice
+ prompt "Subtype"
+ depends on RTC_DRV_DS1685_FAMILY
+ default RTC_DRV_DS1685
+
+config RTC_DRV_DS1685
+ bool "DS1685/DS1687"
+ help
+ This enables support for the Dallas/Maxim DS1685/DS1687 real time
+ clock chip.
+
+ This chip is commonly found in SGI O2 (IP32) and SGI Octane (IP30)
+ systems, as well as EPPC-405-UC modules by electronic system design
+ GmbH.
+
+config RTC_DRV_DS1689
+ bool "DS1689/DS1693"
+ help
+ This enables support for the Dallas/Maxim DS1689/DS1693 real time
+ clock chip.
+
+ This is an older RTC chip, supplanted by the DS1685/DS1687 above,
+ which supports a few minor features such as Vcc, Vbat, and Power
+ Cycle counters, plus a customer-specific, 8-byte ROM/Serial number.
+
+ It also works for the even older DS1688/DS1691 RTC chips, which are
+ virtually the same and carry the same model number. Both chips
+ have 114 bytes of user NVRAM.
+
+config RTC_DRV_DS17285
+ bool "DS17285/DS17287"
+ help
+ This enables support for the Dallas/Maxim DS17285/DS17287 real time
+ clock chip.
+
+ This chip features 2kb of extended NV-SRAM. It may possibly be
+ found in some SGI O2 systems (rare).
+
+config RTC_DRV_DS17485
+ bool "DS17485/DS17487"
+ help
+ This enables support for the Dallas/Maxim DS17485/DS17487 real time
+ clock chip.
+
+ This chip features 4kb of extended NV-SRAM.
+
+config RTC_DRV_DS17885
+ bool "DS17885/DS17887"
+ help
+ This enables support for the Dallas/Maxim DS17885/DS17887 real time
+ clock chip.
+
+ This chip features 8kb of extended NV-SRAM.
+
+endchoice
+
+config RTC_DS1685_PROC_REGS
+ bool "Display register values in /proc"
+ depends on RTC_DRV_DS1685_FAMILY && PROC_FS
+ help
+ Enable this to display a readout of all of the RTC registers in
+ /proc/drivers/rtc. Keep in mind that this can potentially lead
+ to lost interrupts, as reading Control Register C will clear
+ all pending IRQ flags.
+
+ Unless you are debugging this driver, choose N.
+
+config RTC_DS1685_SYSFS_REGS
+ bool "SysFS access to RTC register bits"
+ depends on RTC_DRV_DS1685_FAMILY && SYSFS
+ help
+ Enable this to provide access to the RTC control register bits
+ in /sys. Some of the bits are read-write, others are read-only.
+
+ Keep in mind that reading Control C's bits automatically clears
+ all pending IRQ flags - this can cause lost interrupts.
+
+ If you know that you need access to these bits, choose Y, Else N.
+
+config RTC_DRV_DS1742
+ tristate "Maxim/Dallas DS1742/1743"
+ depends on HAS_IOMEM
+ help
+ If you say yes here you get support for the
+ Maxim/Dallas DS1742/1743 timekeeping chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-ds1742.
+
+config RTC_DRV_DS2404
+ tristate "Maxim/Dallas DS2404"
+ help
+ If you say yes here you get support for the
+ Dallas DS2404 RTC chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-ds2404.
+
+config RTC_DRV_DA9052
+ tristate "Dialog DA9052/DA9053 RTC"
+ depends on PMIC_DA9052
+ help
+ Say y here to support the RTC driver for Dialog Semiconductor
+ DA9052-BC and DA9053-AA/Bx PMICs.
+
+config RTC_DRV_DA9055
+ tristate "Dialog Semiconductor DA9055 RTC"
+ depends on MFD_DA9055
+ help
+ If you say yes here you will get support for the
+ RTC of the Dialog DA9055 PMIC.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-da9055
+
+config RTC_DRV_DA9063
+ tristate "Dialog Semiconductor DA9063 RTC"
+ depends on MFD_DA9063
+ help
+ If you say yes here you will get support for the RTC subsystem
+ of the Dialog Semiconductor DA9063.
+
+ This driver can also be built as a module. If so, the module
+ will be called "rtc-da9063".
+
+config RTC_DRV_EFI
+ tristate "EFI RTC"
+ depends on EFI && !X86
+ help
+ If you say yes here you will get support for the EFI
+ Real Time Clock.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-efi.
+
+config RTC_DRV_STK17TA8
+ tristate "Simtek STK17TA8"
+ depends on HAS_IOMEM
+ help
+ If you say yes here you get support for the
+ Simtek STK17TA8 timekeeping chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-stk17ta8.
+
+config RTC_DRV_M48T86
+ tristate "ST M48T86/Dallas DS12887"
+ help
+ If you say Y here you will get support for the
+ ST M48T86 and Dallas DS12887 RTC chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-m48t86.
+
+config RTC_DRV_M48T35
+ tristate "ST M48T35"
+ depends on HAS_IOMEM
+ help
+ If you say Y here you will get support for the
+ ST M48T35 RTC chip.
+
+ This driver can also be built as a module, if so, the module
+ will be called "rtc-m48t35".
+
+config RTC_DRV_M48T59
+ tristate "ST M48T59/M48T08/M48T02"
+ depends on HAS_IOMEM
+ help
+ If you say Y here you will get support for the
+ ST M48T59 RTC chip and compatible ST M48T08 and M48T02.
+
+ These chips are usually found in Sun SPARC and UltraSPARC
+ workstations.
+
+ This driver can also be built as a module, if so, the module
+ will be called "rtc-m48t59".
+
+config RTC_DRV_MSM6242
+ tristate "Oki MSM6242"
+ depends on HAS_IOMEM
+ help
+ If you say yes here you get support for the Oki MSM6242
+ timekeeping chip. It is used in some Amiga models (e.g. A2000).
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-msm6242.
+
+config RTC_DRV_BQ4802
+ tristate "TI BQ4802"
+ depends on HAS_IOMEM
+ help
+ If you say Y here you will get support for the TI
+ BQ4802 RTC chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-bq4802.
+
+config RTC_DRV_RP5C01
+ tristate "Ricoh RP5C01"
+ depends on HAS_IOMEM
+ help
+ If you say yes here you get support for the Ricoh RP5C01
+ timekeeping chip. It is used in some Amiga models (e.g. A3000
+ and A4000).
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-rp5c01.
+
+config RTC_DRV_V3020
+ tristate "EM Microelectronic V3020"
+ help
+ If you say yes here you will get support for the
+ EM Microelectronic v3020 RTC chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-v3020.
+
+config RTC_DRV_WM831X
+ tristate "Wolfson Microelectronics WM831x RTC"
+ depends on MFD_WM831X
+ help
+ If you say yes here you will get support for the RTC subsystem
+ of the Wolfson Microelectronics WM831X series PMICs.
+
+ This driver can also be built as a module. If so, the module
+ will be called "rtc-wm831x".
+
+config RTC_DRV_WM8350
+ tristate "Wolfson Microelectronics WM8350 RTC"
+ depends on MFD_WM8350
+ help
+ If you say yes here you will get support for the RTC subsystem
+ of the Wolfson Microelectronics WM8350.
+
+ This driver can also be built as a module. If so, the module
+ will be called "rtc-wm8350".
+
+config RTC_DRV_SPEAR
+ tristate "SPEAR ST RTC"
+ depends on PLAT_SPEAR
+ default y
+ help
+ If you say Y here you will get support for the RTC found on
+ spear
+
+config RTC_DRV_PCF50633
+ depends on MFD_PCF50633
+ tristate "NXP PCF50633 RTC"
+ help
+ If you say yes here you get support for the RTC subsystem of the
+ NXP PCF50633 used in embedded systems.
+
+config RTC_DRV_AB3100
+ tristate "ST-Ericsson AB3100 RTC"
+ depends on AB3100_CORE
+ default y if AB3100_CORE
+ help
+ Select this to enable the ST-Ericsson AB3100 Mixed Signal IC RTC
+ support. This chip contains a battery- and capacitor-backed RTC.
+
+config RTC_DRV_AB8500
+ tristate "ST-Ericsson AB8500 RTC"
+ depends on AB8500_CORE
+ select RTC_INTF_DEV
+ select RTC_INTF_DEV_UIE_EMUL
+ help
+ Select this to enable the ST-Ericsson AB8500 power management IC RTC
+ support. This chip contains a battery- and capacitor-backed RTC.
+
+config RTC_DRV_NUC900
+ tristate "NUC910/NUC920 RTC driver"
+ depends on ARCH_W90X900
+ help
+ If you say yes here you get support for the RTC subsystem of the
+ NUC910/NUC920 used in embedded systems.
+
+config RTC_DRV_OPAL
+ tristate "IBM OPAL RTC driver"
+ depends on PPC_POWERNV
+ default y
+ help
+ If you say yes here you get support for the PowerNV platform RTC
+ driver based on OPAL interfaces.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-opal.
+
+comment "on-CPU RTC drivers"
+
+config RTC_DRV_DAVINCI
+ tristate "TI DaVinci RTC"
+ depends on ARCH_DAVINCI_DM365
+ help
+ If you say yes here you get support for the RTC on the
+ DaVinci platforms (DM365).
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-davinci.
+
+config RTC_DRV_DIGICOLOR
+ tristate "Conexant Digicolor RTC"
+ depends on ARCH_DIGICOLOR
+ help
+ If you say yes here you get support for the RTC on Conexant
+ Digicolor platforms. This currently includes the CX92755 SoC.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-digicolor.
+
+config RTC_DRV_IMXDI
+ tristate "Freescale IMX DryIce Real Time Clock"
+ depends on ARCH_MXC
+ help
+ Support for Freescale IMX DryIce RTC
+
+ This driver can also be built as a module, if so, the module
+ will be called "rtc-imxdi".
+
+config RTC_DRV_OMAP
+ tristate "TI OMAP Real Time Clock"
+ depends on ARCH_OMAP || ARCH_DAVINCI
+ help
+ Say "yes" here to support the on chip real time clock
+ present on TI OMAP1, AM33xx, DA8xx/OMAP-L13x, AM43xx and DRA7xx.
+
+ This driver can also be built as a module, if so, module
+ will be called rtc-omap.
+
+config HAVE_S3C_RTC
+ bool
+ help
+ This will include RTC support for Samsung SoCs. If
+ you want to include RTC support for any machine, kindly
+ select this in the respective mach-XXXX/Kconfig file.
+
+config RTC_DRV_S3C
+ tristate "Samsung S3C series SoC RTC"
+ depends on ARCH_S3C64XX || HAVE_S3C_RTC
+ help
+ RTC (Realtime Clock) driver for the clock inbuilt into the
+ Samsung S3C24XX series of SoCs. This can provide periodic
+ interrupt rates from 1Hz to 64Hz for user programs, and
+ wakeup from Alarm.
+
+ The driver currently supports the common features on all the
+ S3C24XX range, such as the S3C2410, S3C2412, S3C2413, S3C2440
+ and S3C2442.
+
+ This driver can also be build as a module. If so, the module
+ will be called rtc-s3c.
+
+config RTC_DRV_EP93XX
+ tristate "Cirrus Logic EP93XX"
+ depends on ARCH_EP93XX
+ help
+ If you say yes here you get support for the
+ RTC embedded in the Cirrus Logic EP93XX processors.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-ep93xx.
+
+config RTC_DRV_SA1100
+ tristate "SA11x0/PXA2xx/PXA910"
+ depends on ARCH_SA1100 || ARCH_PXA || ARCH_MMP
+ help
+ If you say Y here you will get access to the real time clock
+ built into your SA11x0 or PXA2xx CPU.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rtc-sa1100.
+
+config RTC_DRV_SH
+ tristate "SuperH On-Chip RTC"
+ depends on SUPERH && HAVE_CLK
+ help
+ Say Y here to enable support for the on-chip RTC found in
+ most SuperH processors.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rtc-sh.
+
+config RTC_DRV_VR41XX
+ tristate "NEC VR41XX"
+ depends on CPU_VR41XX
+ help
+ If you say Y here you will get access to the real time clock
+ built into your NEC VR41XX CPU.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rtc-vr41xx.
+
+config RTC_DRV_PL030
+ tristate "ARM AMBA PL030 RTC"
+ depends on ARM_AMBA
+ help
+ If you say Y here you will get access to ARM AMBA
+ PrimeCell PL030 RTC found on certain ARM SOCs.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rtc-pl030.
+
+config RTC_DRV_PL031
+ tristate "ARM AMBA PL031 RTC"
+ depends on ARM_AMBA
+ help
+ If you say Y here you will get access to ARM AMBA
+ PrimeCell PL031 RTC found on certain ARM SOCs.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rtc-pl031.
+
+config RTC_DRV_AT32AP700X
+ tristate "AT32AP700X series RTC"
+ depends on PLATFORM_AT32AP
+ help
+ Driver for the internal RTC (Realtime Clock) on Atmel AVR32
+ AT32AP700x family processors.
+
+config RTC_DRV_AT91RM9200
+ tristate "AT91RM9200 or some AT91SAM9 RTC"
+ depends on ARCH_AT91
+ help
+ Driver for the internal RTC (Realtime Clock) module found on
+ Atmel AT91RM9200's and some AT91SAM9 chips. On AT91SAM9 chips
+ this is powered by the backup power supply.
+
+config RTC_DRV_AT91SAM9
+ tristate "AT91SAM9 RTT as RTC"
+ depends on ARCH_AT91
+ select MFD_SYSCON
+ help
+ Some AT91SAM9 SoCs provide an RTT (Real Time Timer) block which
+ can be used as an RTC thanks to the backup power supply (e.g. a
+ small coin cell battery) which keeps this block and the GPBR
+ (General Purpose Backup Registers) block powered when the device
+ is shutdown.
+ Some AT91SAM9 SoCs provide a real RTC block, on those ones you'd
+ probably want to use the real RTC block instead of the "RTT as an
+ RTC" driver.
+
+config RTC_DRV_AU1XXX
+ tristate "Au1xxx Counter0 RTC support"
+ depends on MIPS_ALCHEMY
+ help
+ This is a driver for the Au1xxx on-chip Counter0 (Time-Of-Year
+ counter) to be used as a RTC.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-au1xxx.
+
+config RTC_DRV_BFIN
+ tristate "Blackfin On-Chip RTC"
+ depends on BLACKFIN && !BF561
+ help
+ If you say yes here you will get support for the
+ Blackfin On-Chip Real Time Clock.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-bfin.
+
+config RTC_DRV_RS5C313
+ tristate "Ricoh RS5C313"
+ depends on SH_LANDISK
+ help
+ If you say yes here you get support for the Ricoh RS5C313 RTC chips.
+
+config RTC_DRV_GENERIC
+ tristate "Generic RTC support"
+ # Please consider writing a new RTC driver instead of using the generic
+ # RTC abstraction
+ depends on PARISC || M68K || PPC || SUPERH32
+ help
+ Say Y or M here to enable RTC support on systems using the generic
+ RTC abstraction. If you do not know what you are doing, you should
+ just say Y.
+
+config RTC_DRV_PXA
+ tristate "PXA27x/PXA3xx"
+ depends on ARCH_PXA
+ help
+ If you say Y here you will get access to the real time clock
+ built into your PXA27x or PXA3xx CPU.
+
+ This RTC driver uses PXA RTC registers available since pxa27x
+ series (RDxR, RYxR) instead of legacy RCNR, RTAR.
+
+config RTC_DRV_VT8500
+ tristate "VIA/WonderMedia 85xx SoC RTC"
+ depends on ARCH_VT8500
+ help
+ If you say Y here you will get access to the real time clock
+ built into your VIA VT8500 SoC or its relatives.
+
+
+config RTC_DRV_SUN4V
+ bool "SUN4V Hypervisor RTC"
+ depends on SPARC64
+ help
+ If you say Y here you will get support for the Hypervisor
+ based RTC on SUN4V systems.
+
+config RTC_DRV_SUN6I
+ tristate "Allwinner A31 RTC"
+ depends on MACH_SUN6I || MACH_SUN8I
+ help
+ If you say Y here you will get support for the RTC found on
+ Allwinner A31.
+
+config RTC_DRV_SUNXI
+ tristate "Allwinner sun4i/sun7i RTC"
+ depends on MACH_SUN4I || MACH_SUN7I
+ help
+ If you say Y here you will get support for the RTC found on
+ Allwinner A10/A20.
+
+config RTC_DRV_STARFIRE
+ bool "Starfire RTC"
+ depends on SPARC64
+ help
+ If you say Y here you will get support for the RTC found on
+ Starfire systems.
+
+config RTC_DRV_TX4939
+ tristate "TX4939 SoC"
+ depends on SOC_TX4939
+ help
+ Driver for the internal RTC (Realtime Clock) module found on
+ Toshiba TX4939 SoC.
+
+config RTC_DRV_MV
+ tristate "Marvell SoC RTC"
+ depends on ARCH_DOVE || ARCH_MVEBU
+ help
+ If you say yes here you will get support for the in-chip RTC
+ that can be found in some of Marvell's SoC devices, such as
+ the Kirkwood 88F6281 and 88F6192.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-mv.
+
+config RTC_DRV_ARMADA38X
+ tristate "Armada 38x Marvell SoC RTC"
+ depends on ARCH_MVEBU
+ help
+ If you say yes here you will get support for the in-chip RTC
+ that can be found in the Armada 38x Marvell's SoC device
+
+ This driver can also be built as a module. If so, the module
+ will be called armada38x-rtc.
+
+config RTC_DRV_PS3
+ tristate "PS3 RTC"
+ depends on PPC_PS3
+ help
+ If you say yes here you will get support for the RTC on PS3.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-ps3.
+
+config RTC_DRV_COH901331
+ tristate "ST-Ericsson COH 901 331 RTC"
+ depends on ARCH_U300
+ help
+ If you say Y here you will get access to ST-Ericsson
+ COH 901 331 RTC clock found in some ST-Ericsson Mobile
+ Platforms.
+
+ This driver can also be built as a module. If so, the module
+ will be called "rtc-coh901331".
+
+
+config RTC_DRV_STMP
+ tristate "Freescale STMP3xxx/i.MX23/i.MX28 RTC"
+ depends on ARCH_MXS
+ help
+ If you say yes here you will get support for the onboard
+ STMP3xxx/i.MX23/i.MX28 RTC.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-stmp3xxx.
+
+config RTC_DRV_PCAP
+ tristate "PCAP RTC"
+ depends on EZX_PCAP
+ help
+ If you say Y here you will get support for the RTC found on
+ the PCAP2 ASIC used on some Motorola phones.
+
+config RTC_DRV_MC13XXX
+ depends on MFD_MC13XXX
+ tristate "Freescale MC13xxx RTC"
+ help
+ This enables support for the RTCs found on Freescale's PMICs
+ MC13783 and MC13892.
+
+config RTC_DRV_MPC5121
+ tristate "Freescale MPC5121 built-in RTC"
+ depends on PPC_MPC512x || PPC_MPC52xx
+ help
+ If you say yes here you will get support for the
+ built-in RTC on MPC5121 or on MPC5200.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-mpc5121.
+
+config RTC_DRV_JZ4740
+ tristate "Ingenic JZ4740 SoC"
+ depends on MACH_JZ4740
+ help
+ If you say yes here you get support for the Ingenic JZ4740 SoC RTC
+ controller.
+
+ This driver can also be buillt as a module. If so, the module
+ will be called rtc-jz4740.
+
+config RTC_DRV_LPC32XX
+ depends on ARCH_LPC32XX
+ tristate "NXP LPC32XX RTC"
+ help
+ This enables support for the NXP RTC in the LPC32XX
+
+ This driver can also be buillt as a module. If so, the module
+ will be called rtc-lpc32xx.
+
+config RTC_DRV_PM8XXX
+ tristate "Qualcomm PMIC8XXX RTC"
+ depends on MFD_PM8XXX || MFD_SPMI_PMIC
+ help
+ If you say yes here you get support for the
+ Qualcomm PMIC8XXX RTC.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rtc-pm8xxx.
+
+config RTC_DRV_TEGRA
+ tristate "NVIDIA Tegra Internal RTC driver"
+ depends on ARCH_TEGRA
+ help
+ If you say yes here you get support for the
+ Tegra 200 series internal RTC module.
+
+ This drive can also be built as a module. If so, the module
+ will be called rtc-tegra.
+
+config RTC_DRV_TILE
+ tristate "Tilera hypervisor RTC support"
+ depends on TILE
+ help
+ Enable support for the Linux driver side of the Tilera
+ hypervisor's real-time clock interface.
+
+config RTC_DRV_PUV3
+ tristate "PKUnity v3 RTC support"
+ depends on ARCH_PUV3
+ help
+ This enables support for the RTC in the PKUnity-v3 SoCs.
+
+ This drive can also be built as a module. If so, the module
+ will be called rtc-puv3.
+
+config RTC_DRV_LOONGSON1
+ tristate "loongson1 RTC support"
+ depends on MACH_LOONGSON1
+ help
+ This is a driver for the loongson1 on-chip Counter0 (Time-Of-Year
+ counter) to be used as a RTC.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-ls1x.
+
+config RTC_DRV_MXC
+ tristate "Freescale MXC Real Time Clock"
+ depends on ARCH_MXC
+ help
+ If you say yes here you get support for the Freescale MXC
+ RTC module.
+
+ This driver can also be built as a module, if so, the module
+ will be called "rtc-mxc".
+
+config RTC_DRV_SNVS
+ tristate "Freescale SNVS RTC support"
+ depends on HAS_IOMEM
+ depends on OF
+ help
+ If you say yes here you get support for the Freescale SNVS
+ Low Power (LP) RTC module.
+
+ This driver can also be built as a module, if so, the module
+ will be called "rtc-snvs".
+
+config RTC_DRV_SIRFSOC
+ tristate "SiRFSOC RTC"
+ depends on ARCH_SIRF
+ help
+ Say "yes" here to support the real time clock on SiRF SOC chips.
+ This driver can also be built as a module called rtc-sirfsoc.
+
+config RTC_DRV_MOXART
+ tristate "MOXA ART RTC"
+ depends on ARCH_MOXART || COMPILE_TEST
+ help
+ If you say yes here you get support for the MOXA ART
+ RTC module.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-moxart
+
+config RTC_DRV_XGENE
+ tristate "APM X-Gene RTC"
+ depends on HAS_IOMEM
+ help
+ If you say yes here you get support for the APM X-Gene SoC real time
+ clock.
+
+ This driver can also be built as a module, if so, the module
+ will be called "rtc-xgene".
+
+comment "HID Sensor RTC drivers"
+
+config RTC_DRV_HID_SENSOR_TIME
+ tristate "HID Sensor Time"
+ depends on USB_HID
+ select IIO
+ select HID_SENSOR_HUB
+ select HID_SENSOR_IIO_COMMON
+ help
+ Say yes here to build support for the HID Sensors of type Time.
+ This drivers makes such sensors available as RTCs.
+
+ If this driver is compiled as a module, it will be named
+ rtc-hid-sensor-time.
+
+
+endif # RTC_CLASS