diff options
Diffstat (limited to 'kernel/drivers/rtc/Kconfig')
| -rw-r--r-- | kernel/drivers/rtc/Kconfig | 150 |
1 files changed, 111 insertions, 39 deletions
diff --git a/kernel/drivers/rtc/Kconfig b/kernel/drivers/rtc/Kconfig index 0fe4ad882..2a524244a 100644 --- a/kernel/drivers/rtc/Kconfig +++ b/kernel/drivers/rtc/Kconfig @@ -12,7 +12,7 @@ menuconfig RTC_CLASS select RTC_LIB help Generic RTC class support. If you say yes here, you will - be allowed to plug one or more RTCs to your system. You will + be allowed to plug one or more RTCs to your system. You will probably want to enable one or more of the interfaces below. if RTC_CLASS @@ -25,17 +25,9 @@ config RTC_HCTOSYS the value read from a specified RTC device. This is useful to avoid unnecessary fsck runs at boot time, and to network better. -config RTC_SYSTOHC - bool "Set the RTC time based on NTP synchronization" - default y - help - If you say yes here, the system time (wall clock) will be stored - in the RTC specified by RTC_HCTOSYS_DEVICE approximately every 11 - minutes if userspace reports synchronized NTP status. - config RTC_HCTOSYS_DEVICE string "RTC used to set the system time" - depends on RTC_HCTOSYS = y || RTC_SYSTOHC = y + depends on RTC_HCTOSYS default "rtc0" help The RTC device that will be used to (re)initialize the system @@ -56,6 +48,25 @@ config RTC_HCTOSYS_DEVICE sleep states. Do not specify an RTC here unless it stays powered during all this system's supported sleep states. +config RTC_SYSTOHC + bool "Set the RTC time based on NTP synchronization" + default y + help + If you say yes here, the system time (wall clock) will be stored + in the RTC specified by RTC_HCTOSYS_DEVICE approximately every 11 + minutes if userspace reports synchronized NTP status. + +config RTC_SYSTOHC_DEVICE + string "RTC used to synchronize NTP adjustment" + depends on RTC_SYSTOHC + default RTC_HCTOSYS_DEVICE if RTC_HCTOSYS + default "rtc0" + help + The RTC device used for NTP synchronization. The main difference + between RTC_HCTOSYS_DEVICE and RTC_SYSTOHC_DEVICE is that this + one can sleep when setting time, because it runs in the workqueue + context. + config RTC_DEBUG bool "RTC debug support" help @@ -135,7 +146,7 @@ if I2C config RTC_DRV_88PM860X tristate "Marvell 88PM860x" - depends on I2C && MFD_88PM860X + depends on MFD_88PM860X help If you say yes here you get support for RTC function in Marvell 88PM860x chips. @@ -145,7 +156,7 @@ config RTC_DRV_88PM860X config RTC_DRV_88PM80X tristate "Marvell 88PM80x" - depends on I2C && MFD_88PM800 + depends on MFD_88PM800 help If you say yes here you get support for RTC function in Marvell 88PM80x chips. @@ -154,10 +165,9 @@ config RTC_DRV_88PM80X will be called rtc-88pm80x. config RTC_DRV_ABB5ZES3 - depends on I2C - select REGMAP_I2C - tristate "Abracon AB-RTCMC-32.768kHz-B5ZE-S3" - help + select REGMAP_I2C + tristate "Abracon AB-RTCMC-32.768kHz-B5ZE-S3" + help If you say yes here you get support for the Abracon AB-RTCMC-32.768kHz-B5ZE-S3 I2C RTC chip. @@ -204,7 +214,6 @@ config RTC_DRV_DS1307 config RTC_DRV_DS1374 tristate "Dallas/Maxim DS1374" - depends on I2C help If you say yes here you get support for Dallas Semiconductor DS1374 real-time clock chips. If an interrupt is associated @@ -232,7 +241,6 @@ config RTC_DRV_DS1672 config RTC_DRV_DS3232 tristate "Dallas/Maxim DS3232" - depends on I2C help If you say yes here you get support for Dallas Semiconductor DS3232 real-time clock chips. If an interrupt is associated @@ -243,7 +251,7 @@ config RTC_DRV_DS3232 config RTC_DRV_HYM8563 tristate "Haoyu Microelectronics HYM8563" - depends on I2C && OF + depends on OF help Say Y to enable support for the HYM8563 I2C RTC chip. Apart from the usual rtc functions it provides a clock output of @@ -365,10 +373,9 @@ config RTC_DRV_ISL12022 will be called rtc-isl12022. config RTC_DRV_ISL12057 - depends on I2C - select REGMAP_I2C - tristate "Intersil ISL12057" - help + select REGMAP_I2C + tristate "Intersil ISL12057" + help If you say yes here you get support for the Intersil ISL12057 I2C RTC chip. @@ -586,6 +593,15 @@ config RTC_DRV_RV3029C2 This driver can also be built as a module. If so, the module will be called rtc-rv3029c2. +config RTC_DRV_RV8803 + tristate "Micro Crystal RV8803" + help + If you say yes here you get support for the Micro Crystal + RV8803 RTC chips. + + This driver can also be built as a module. If so, the module + will be called rtc-rv8803. + config RTC_DRV_S5M tristate "Samsung S2M/S5M series" depends on MFD_SEC_CORE @@ -603,13 +619,13 @@ comment "SPI RTC drivers" if SPI_MASTER config RTC_DRV_M41T93 - tristate "ST M41T93" - help - If you say yes here you will get support for the - ST M41T93 SPI RTC chip. + tristate "ST M41T93" + help + If you say yes here you will get support for the + ST M41T93 SPI RTC chip. - This driver can also be built as a module. If so, the module - will be called rtc-m41t93. + This driver can also be built as a module. If so, the module + will be called rtc-m41t93. config RTC_DRV_M41T94 tristate "ST M41T94" @@ -659,8 +675,8 @@ config RTC_DRV_DS1390 If you say yes here you get support for the Dallas/Maxim DS1390/93/94 chips. - This driver only supports the RTC feature, and not other chip - features such as alarms and trickle charging. + This driver supports the RTC feature and trickle charging but not + other chip features such as alarms. This driver can also be built as a module. If so, the module will be called rtc-ds1390. @@ -938,11 +954,11 @@ config RTC_DRV_DA9055 will be called rtc-da9055 config RTC_DRV_DA9063 - tristate "Dialog Semiconductor DA9063 RTC" - depends on MFD_DA9063 + tristate "Dialog Semiconductor DA9063/DA9062 RTC" + depends on MFD_DA9063 || MFD_DA9062 help If you say yes here you will get support for the RTC subsystem - of the Dialog Semiconductor DA9063. + for the Dialog Semiconductor PMIC chips DA9063 and DA9062. This driver can also be built as a module. If so, the module will be called "rtc-da9063". @@ -1109,6 +1125,13 @@ config RTC_DRV_OPAL This driver can also be built as a module. If so, the module will be called rtc-opal. +config RTC_DRV_ZYNQMP + tristate "Xilinx Zynq Ultrascale+ MPSoC RTC" + depends on OF + help + If you say yes here you get support for the RTC controller found on + Xilinx Zynq Ultrascale+ MPSoC. + comment "on-CPU RTC drivers" config RTC_DRV_DAVINCI @@ -1200,7 +1223,7 @@ config RTC_DRV_SH Say Y here to enable support for the on-chip RTC found in most SuperH processors. - To compile this driver as a module, choose M here: the + To compile this driver as a module, choose M here: the module will be called rtc-sh. config RTC_DRV_VR41XX @@ -1301,12 +1324,14 @@ config RTC_DRV_GENERIC config RTC_DRV_PXA tristate "PXA27x/PXA3xx" depends on ARCH_PXA + select RTC_DRV_SA1100 help If you say Y here you will get access to the real time clock - built into your PXA27x or PXA3xx CPU. + built into your PXA27x or PXA3xx CPU. This RTC is actually 2 RTCs + consisting of an SA1100 compatible RTC and the extended PXA RTC. - This RTC driver uses PXA RTC registers available since pxa27x - series (RDxR, RYxR) instead of legacy RCNR, RTAR. + This RTC driver uses PXA RTC registers available since pxa27x + series (RDxR, RYxR) instead of legacy RCNR, RTAR. config RTC_DRV_VT8500 tristate "VIA/WonderMedia 85xx SoC RTC" @@ -1372,6 +1397,17 @@ config RTC_DRV_ARMADA38X This driver can also be built as a module. If so, the module will be called armada38x-rtc. +config RTC_DRV_GEMINI + tristate "Gemini SoC RTC" + depends on ARCH_GEMINI || COMPILE_TEST + depends on HAS_IOMEM + help + If you say Y here you will get support for the + RTC found on Gemini SoC's. + + This driver can also be built as a module. If so, the module + will be called rtc-gemini. + config RTC_DRV_PS3 tristate "PS3 RTC" depends on PPC_PS3 @@ -1396,6 +1432,7 @@ config RTC_DRV_COH901331 config RTC_DRV_STMP tristate "Freescale STMP3xxx/i.MX23/i.MX28 RTC" depends on ARCH_MXS + select STMP_DEVICE help If you say yes here you will get support for the onboard STMP3xxx/i.MX23/i.MX28 RTC. @@ -1437,6 +1474,18 @@ config RTC_DRV_JZ4740 This driver can also be buillt as a module. If so, the module will be called rtc-jz4740. +config RTC_DRV_LPC24XX + tristate "NXP RTC for LPC178x/18xx/408x/43xx" + depends on ARCH_LPC18XX || COMPILE_TEST + depends on OF && HAS_IOMEM + help + This enables support for the NXP RTC found which can be found on + NXP LPC178x/18xx/408x/43xx devices. + + If you have one of the devices above enable this driver to use + the hardware RTC. This driver can also be buillt as a module. If + so, the module will be called rtc-lpc24xx. + config RTC_DRV_LPC32XX depends on ARCH_LPC32XX tristate "NXP LPC32XX RTC" @@ -1484,7 +1533,7 @@ config RTC_DRV_PUV3 config RTC_DRV_LOONGSON1 tristate "loongson1 RTC support" - depends on MACH_LOONGSON1 + depends on MACH_LOONGSON32 help This is a driver for the loongson1 on-chip Counter0 (Time-Of-Year counter) to be used as a RTC. @@ -1504,6 +1553,7 @@ config RTC_DRV_MXC config RTC_DRV_SNVS tristate "Freescale SNVS RTC support" + select REGMAP_MMIO depends on HAS_IOMEM depends on OF help @@ -1520,6 +1570,17 @@ config RTC_DRV_SIRFSOC Say "yes" here to support the real time clock on SiRF SOC chips. This driver can also be built as a module called rtc-sirfsoc. +config RTC_DRV_ST_LPC + tristate "STMicroelectronics LPC RTC" + depends on ARCH_STI + depends on OF + help + Say Y here to include STMicroelectronics Low Power Controller + (LPC) based RTC support. + + To compile this driver as a module, choose M here: the + module will be called rtc-st-lpc. + config RTC_DRV_MOXART tristate "MOXA ART RTC" depends on ARCH_MOXART || COMPILE_TEST @@ -1530,9 +1591,20 @@ config RTC_DRV_MOXART This driver can also be built as a module. If so, the module will be called rtc-moxart +config RTC_DRV_MT6397 + tristate "Mediatek Real Time Clock driver" + depends on MFD_MT6397 || COMPILE_TEST + help + This selects the Mediatek(R) RTC driver. RTC is part of Mediatek + MT6397 PMIC. You should enable MT6397 PMIC MFD before select + Mediatek(R) RTC driver. + + If you want to use Mediatek(R) RTC interface, select Y or M here. + config RTC_DRV_XGENE tristate "APM X-Gene RTC" depends on HAS_IOMEM + depends on ARCH_XGENE || COMPILE_TEST help If you say yes here you get support for the APM X-Gene SoC real time clock. |