diff options
Diffstat (limited to 'kernel/drivers/power/max8903_charger.c')
| -rw-r--r-- | kernel/drivers/power/max8903_charger.c | 383 |
1 files changed, 383 insertions, 0 deletions
diff --git a/kernel/drivers/power/max8903_charger.c b/kernel/drivers/power/max8903_charger.c new file mode 100644 index 000000000..bf2b4b3a7 --- /dev/null +++ b/kernel/drivers/power/max8903_charger.c @@ -0,0 +1,383 @@ +/* + * max8903_charger.c - Maxim 8903 USB/Adapter Charger Driver + * + * Copyright (C) 2011 Samsung Electronics + * MyungJoo Ham <myungjoo.ham@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <linux/gpio.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/power_supply.h> +#include <linux/platform_device.h> +#include <linux/power/max8903_charger.h> + +struct max8903_data { + struct max8903_pdata pdata; + struct device *dev; + struct power_supply *psy; + struct power_supply_desc psy_desc; + bool fault; + bool usb_in; + bool ta_in; +}; + +static enum power_supply_property max8903_charger_props[] = { + POWER_SUPPLY_PROP_STATUS, /* Charger status output */ + POWER_SUPPLY_PROP_ONLINE, /* External power source */ + POWER_SUPPLY_PROP_HEALTH, /* Fault or OK */ +}; + +static int max8903_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct max8903_data *data = power_supply_get_drvdata(psy); + + switch (psp) { + case POWER_SUPPLY_PROP_STATUS: + val->intval = POWER_SUPPLY_STATUS_UNKNOWN; + if (data->pdata.chg) { + if (gpio_get_value(data->pdata.chg) == 0) + val->intval = POWER_SUPPLY_STATUS_CHARGING; + else if (data->usb_in || data->ta_in) + val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; + else + val->intval = POWER_SUPPLY_STATUS_DISCHARGING; + } + break; + case POWER_SUPPLY_PROP_ONLINE: + val->intval = 0; + if (data->usb_in || data->ta_in) + val->intval = 1; + break; + case POWER_SUPPLY_PROP_HEALTH: + val->intval = POWER_SUPPLY_HEALTH_GOOD; + if (data->fault) + val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE; + break; + default: + return -EINVAL; + } + return 0; +} + +static irqreturn_t max8903_dcin(int irq, void *_data) +{ + struct max8903_data *data = _data; + struct max8903_pdata *pdata = &data->pdata; + bool ta_in; + enum power_supply_type old_type; + + ta_in = gpio_get_value(pdata->dok) ? false : true; + + if (ta_in == data->ta_in) + return IRQ_HANDLED; + + data->ta_in = ta_in; + + /* Set Current-Limit-Mode 1:DC 0:USB */ + if (pdata->dcm) + gpio_set_value(pdata->dcm, ta_in ? 1 : 0); + + /* Charger Enable / Disable (cen is negated) */ + if (pdata->cen) + gpio_set_value(pdata->cen, ta_in ? 0 : + (data->usb_in ? 0 : 1)); + + dev_dbg(data->dev, "TA(DC-IN) Charger %s.\n", ta_in ? + "Connected" : "Disconnected"); + + old_type = data->psy_desc.type; + + if (data->ta_in) + data->psy_desc.type = POWER_SUPPLY_TYPE_MAINS; + else if (data->usb_in) + data->psy_desc.type = POWER_SUPPLY_TYPE_USB; + else + data->psy_desc.type = POWER_SUPPLY_TYPE_BATTERY; + + if (old_type != data->psy_desc.type) + power_supply_changed(data->psy); + + return IRQ_HANDLED; +} + +static irqreturn_t max8903_usbin(int irq, void *_data) +{ + struct max8903_data *data = _data; + struct max8903_pdata *pdata = &data->pdata; + bool usb_in; + enum power_supply_type old_type; + + usb_in = gpio_get_value(pdata->uok) ? false : true; + + if (usb_in == data->usb_in) + return IRQ_HANDLED; + + data->usb_in = usb_in; + + /* Do not touch Current-Limit-Mode */ + + /* Charger Enable / Disable (cen is negated) */ + if (pdata->cen) + gpio_set_value(pdata->cen, usb_in ? 0 : + (data->ta_in ? 0 : 1)); + + dev_dbg(data->dev, "USB Charger %s.\n", usb_in ? + "Connected" : "Disconnected"); + + old_type = data->psy_desc.type; + + if (data->ta_in) + data->psy_desc.type = POWER_SUPPLY_TYPE_MAINS; + else if (data->usb_in) + data->psy_desc.type = POWER_SUPPLY_TYPE_USB; + else + data->psy_desc.type = POWER_SUPPLY_TYPE_BATTERY; + + if (old_type != data->psy_desc.type) + power_supply_changed(data->psy); + + return IRQ_HANDLED; +} + +static irqreturn_t max8903_fault(int irq, void *_data) +{ + struct max8903_data *data = _data; + struct max8903_pdata *pdata = &data->pdata; + bool fault; + + fault = gpio_get_value(pdata->flt) ? false : true; + + if (fault == data->fault) + return IRQ_HANDLED; + + data->fault = fault; + + if (fault) + dev_err(data->dev, "Charger suffers a fault and stops.\n"); + else + dev_err(data->dev, "Charger recovered from a fault.\n"); + + return IRQ_HANDLED; +} + +static int max8903_probe(struct platform_device *pdev) +{ + struct max8903_data *data; + struct device *dev = &pdev->dev; + struct max8903_pdata *pdata = pdev->dev.platform_data; + struct power_supply_config psy_cfg = {}; + int ret = 0; + int gpio; + int ta_in = 0; + int usb_in = 0; + + data = devm_kzalloc(dev, sizeof(struct max8903_data), GFP_KERNEL); + if (data == NULL) { + dev_err(dev, "Cannot allocate memory.\n"); + return -ENOMEM; + } + memcpy(&data->pdata, pdata, sizeof(struct max8903_pdata)); + data->dev = dev; + platform_set_drvdata(pdev, data); + + if (pdata->dc_valid == false && pdata->usb_valid == false) { + dev_err(dev, "No valid power sources.\n"); + ret = -EINVAL; + goto err; + } + + if (pdata->dc_valid) { + if (pdata->dok && gpio_is_valid(pdata->dok) && + pdata->dcm && gpio_is_valid(pdata->dcm)) { + gpio = pdata->dok; /* PULL_UPed Interrupt */ + ta_in = gpio_get_value(gpio) ? 0 : 1; + + gpio = pdata->dcm; /* Output */ + gpio_set_value(gpio, ta_in); + } else { + dev_err(dev, "When DC is wired, DOK and DCM should" + " be wired as well.\n"); + ret = -EINVAL; + goto err; + } + } else { + if (pdata->dcm) { + if (gpio_is_valid(pdata->dcm)) + gpio_set_value(pdata->dcm, 0); + else { + dev_err(dev, "Invalid pin: dcm.\n"); + ret = -EINVAL; + goto err; + } + } + } + + if (pdata->usb_valid) { + if (pdata->uok && gpio_is_valid(pdata->uok)) { + gpio = pdata->uok; + usb_in = gpio_get_value(gpio) ? 0 : 1; + } else { + dev_err(dev, "When USB is wired, UOK should be wired." + "as well.\n"); + ret = -EINVAL; + goto err; + } + } + + if (pdata->cen) { + if (gpio_is_valid(pdata->cen)) { + gpio_set_value(pdata->cen, (ta_in || usb_in) ? 0 : 1); + } else { + dev_err(dev, "Invalid pin: cen.\n"); + ret = -EINVAL; + goto err; + } + } + + if (pdata->chg) { + if (!gpio_is_valid(pdata->chg)) { + dev_err(dev, "Invalid pin: chg.\n"); + ret = -EINVAL; + goto err; + } + } + + if (pdata->flt) { + if (!gpio_is_valid(pdata->flt)) { + dev_err(dev, "Invalid pin: flt.\n"); + ret = -EINVAL; + goto err; + } + } + + if (pdata->usus) { + if (!gpio_is_valid(pdata->usus)) { + dev_err(dev, "Invalid pin: usus.\n"); + ret = -EINVAL; + goto err; + } + } + + data->fault = false; + data->ta_in = ta_in; + data->usb_in = usb_in; + + data->psy_desc.name = "max8903_charger"; + data->psy_desc.type = (ta_in) ? POWER_SUPPLY_TYPE_MAINS : + ((usb_in) ? POWER_SUPPLY_TYPE_USB : + POWER_SUPPLY_TYPE_BATTERY); + data->psy_desc.get_property = max8903_get_property; + data->psy_desc.properties = max8903_charger_props; + data->psy_desc.num_properties = ARRAY_SIZE(max8903_charger_props); + + psy_cfg.drv_data = data; + + data->psy = power_supply_register(dev, &data->psy_desc, &psy_cfg); + if (IS_ERR(data->psy)) { + dev_err(dev, "failed: power supply register.\n"); + ret = PTR_ERR(data->psy); + goto err; + } + + if (pdata->dc_valid) { + ret = request_threaded_irq(gpio_to_irq(pdata->dok), + NULL, max8903_dcin, + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, + "MAX8903 DC IN", data); + if (ret) { + dev_err(dev, "Cannot request irq %d for DC (%d)\n", + gpio_to_irq(pdata->dok), ret); + goto err_psy; + } + } + + if (pdata->usb_valid) { + ret = request_threaded_irq(gpio_to_irq(pdata->uok), + NULL, max8903_usbin, + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, + "MAX8903 USB IN", data); + if (ret) { + dev_err(dev, "Cannot request irq %d for USB (%d)\n", + gpio_to_irq(pdata->uok), ret); + goto err_dc_irq; + } + } + + if (pdata->flt) { + ret = request_threaded_irq(gpio_to_irq(pdata->flt), + NULL, max8903_fault, + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, + "MAX8903 Fault", data); + if (ret) { + dev_err(dev, "Cannot request irq %d for Fault (%d)\n", + gpio_to_irq(pdata->flt), ret); + goto err_usb_irq; + } + } + + return 0; + +err_usb_irq: + if (pdata->usb_valid) + free_irq(gpio_to_irq(pdata->uok), data); +err_dc_irq: + if (pdata->dc_valid) + free_irq(gpio_to_irq(pdata->dok), data); +err_psy: + power_supply_unregister(data->psy); +err: + return ret; +} + +static int max8903_remove(struct platform_device *pdev) +{ + struct max8903_data *data = platform_get_drvdata(pdev); + + if (data) { + struct max8903_pdata *pdata = &data->pdata; + + if (pdata->flt) + free_irq(gpio_to_irq(pdata->flt), data); + if (pdata->usb_valid) + free_irq(gpio_to_irq(pdata->uok), data); + if (pdata->dc_valid) + free_irq(gpio_to_irq(pdata->dok), data); + power_supply_unregister(data->psy); + } + + return 0; +} + +static struct platform_driver max8903_driver = { + .probe = max8903_probe, + .remove = max8903_remove, + .driver = { + .name = "max8903-charger", + }, +}; + +module_platform_driver(max8903_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("MAX8903 Charger Driver"); +MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>"); +MODULE_ALIAS("platform:max8903-charger"); |