diff options
Diffstat (limited to 'kernel/drivers/pinctrl/Kconfig')
| -rw-r--r-- | kernel/drivers/pinctrl/Kconfig | 239 |
1 files changed, 239 insertions, 0 deletions
diff --git a/kernel/drivers/pinctrl/Kconfig b/kernel/drivers/pinctrl/Kconfig new file mode 100644 index 000000000..aeb5729fb --- /dev/null +++ b/kernel/drivers/pinctrl/Kconfig @@ -0,0 +1,239 @@ +# +# PINCTRL infrastructure and drivers +# + +config PINCTRL + bool + +if PINCTRL + +menu "Pin controllers" + depends on PINCTRL + +config PINMUX + bool "Support pin multiplexing controllers" if COMPILE_TEST + +config PINCONF + bool "Support pin configuration controllers" if COMPILE_TEST + +config GENERIC_PINCONF + bool + select PINCONF + +config DEBUG_PINCTRL + bool "Debug PINCTRL calls" + depends on DEBUG_KERNEL + help + Say Y here to add some extra checks and diagnostics to PINCTRL calls. + +config PINCTRL_ADI2 + bool "ADI pin controller driver" + depends on BLACKFIN + select PINMUX + select IRQ_DOMAIN + help + This is the pin controller and gpio driver for ADI BF54x, BF60x and + future processors. This option is selected automatically when specific + machine and arch are selected to build. + +config PINCTRL_AS3722 + bool "Pinctrl and GPIO driver for ams AS3722 PMIC" + depends on MFD_AS3722 && GPIOLIB + select PINMUX + select GENERIC_PINCONF + help + AS3722 device supports the configuration of GPIO pins for different + functionality. This driver supports the pinmux, push-pull and + open drain configuration for the GPIO pins of AS3722 devices. It also + supports the GPIO functionality through gpiolib. + +config PINCTRL_BF54x + def_bool y if BF54x + select PINCTRL_ADI2 + +config PINCTRL_BF60x + def_bool y if BF60x + select PINCTRL_ADI2 + +config PINCTRL_AT91 + bool "AT91 pinctrl driver" + depends on OF + depends on ARCH_AT91 + select PINMUX + select PINCONF + select GPIOLIB + select OF_GPIO + select GPIOLIB_IRQCHIP + help + Say Y here to enable the at91 pinctrl driver + +config PINCTRL_AMD + bool "AMD GPIO pin control" + depends on GPIOLIB + select GPIOLIB_IRQCHIP + select PINCONF + select GENERIC_PINCONF + help + driver for memory mapped GPIO functionality on AMD platforms + (x86 or arm).Most pins are usually muxed to some other + functionality by firmware,so only a small amount is available + for gpio use. + + Requires ACPI/FDT device enumeration code to set up a platform + device. + +config PINCTRL_LANTIQ + bool + depends on LANTIQ + select PINMUX + select PINCONF + +config PINCTRL_FALCON + bool + depends on SOC_FALCON + depends on PINCTRL_LANTIQ + +config PINCTRL_MESON + bool + depends on OF + select PINMUX + select PINCONF + select GENERIC_PINCONF + select GPIOLIB + select OF_GPIO + select REGMAP_MMIO + +config PINCTRL_ROCKCHIP + bool + select PINMUX + select GENERIC_PINCONF + select GENERIC_IRQ_CHIP + select MFD_SYSCON + +config PINCTRL_SINGLE + tristate "One-register-per-pin type device tree based pinctrl driver" + depends on OF + select PINMUX + select PINCONF + select GENERIC_PINCONF + help + This selects the device tree based generic pinctrl driver. + +config PINCTRL_SIRF + bool "CSR SiRFprimaII pin controller driver" + depends on ARCH_SIRF + select PINMUX + select GPIOLIB_IRQCHIP + +config PINCTRL_ST + bool + depends on OF + select PINMUX + select PINCONF + select GPIOLIB_IRQCHIP + +config PINCTRL_TEGRA + bool + select PINMUX + select PINCONF + +config PINCTRL_TEGRA20 + bool + select PINCTRL_TEGRA + +config PINCTRL_TEGRA30 + bool + select PINCTRL_TEGRA + +config PINCTRL_TEGRA114 + bool + select PINCTRL_TEGRA + +config PINCTRL_TEGRA124 + bool + select PINCTRL_TEGRA + +config PINCTRL_TEGRA210 + bool + select PINCTRL_TEGRA + +config PINCTRL_TEGRA_XUSB + def_bool y if ARCH_TEGRA + select GENERIC_PHY + select PINCONF + select PINMUX + +config PINCTRL_TZ1090 + bool "Toumaz Xenif TZ1090 pin control driver" + depends on SOC_TZ1090 + select PINMUX + select GENERIC_PINCONF + +config PINCTRL_TZ1090_PDC + bool "Toumaz Xenif TZ1090 PDC pin control driver" + depends on SOC_TZ1090 + select PINMUX + select PINCONF + +config PINCTRL_U300 + bool "U300 pin controller driver" + depends on ARCH_U300 + select PINMUX + select GENERIC_PINCONF + +config PINCTRL_COH901 + bool "ST-Ericsson U300 COH 901 335/571 GPIO" + depends on GPIOLIB && ARCH_U300 && PINCTRL_U300 + select GPIOLIB_IRQCHIP + help + Say yes here to support GPIO interface on ST-Ericsson U300. + The names of the two IP block variants supported are + COH 901 335 and COH 901 571/3. They contain 3, 5 or 7 + ports of 8 GPIO pins each. + +config PINCTRL_PALMAS + bool "Pinctrl driver for the PALMAS Series MFD devices" + depends on OF && MFD_PALMAS + select PINMUX + select GENERIC_PINCONF + help + Palmas device supports the configuration of pins for different + functionality. This driver supports the pinmux, push-pull and + open drain configuration for the Palmas series devices like + TPS65913, TPS80036 etc. + +config PINCTRL_ZYNQ + bool "Pinctrl driver for Xilinx Zynq" + depends on ARCH_ZYNQ + select PINMUX + select GENERIC_PINCONF + help + This selectes the pinctrl driver for Xilinx Zynq. + +source "drivers/pinctrl/bcm/Kconfig" +source "drivers/pinctrl/berlin/Kconfig" +source "drivers/pinctrl/freescale/Kconfig" +source "drivers/pinctrl/intel/Kconfig" +source "drivers/pinctrl/mvebu/Kconfig" +source "drivers/pinctrl/nomadik/Kconfig" +source "drivers/pinctrl/qcom/Kconfig" +source "drivers/pinctrl/samsung/Kconfig" +source "drivers/pinctrl/sh-pfc/Kconfig" +source "drivers/pinctrl/spear/Kconfig" +source "drivers/pinctrl/sunxi/Kconfig" +source "drivers/pinctrl/vt8500/Kconfig" +source "drivers/pinctrl/mediatek/Kconfig" + +config PINCTRL_XWAY + bool + depends on SOC_TYPE_XWAY + depends on PINCTRL_LANTIQ + +config PINCTRL_TB10X + bool + depends on OF && ARC_PLAT_TB10X + select GPIOLIB + +endmenu + +endif |