summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/pinctrl/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/pinctrl/Kconfig')
-rw-r--r--kernel/drivers/pinctrl/Kconfig239
1 files changed, 239 insertions, 0 deletions
diff --git a/kernel/drivers/pinctrl/Kconfig b/kernel/drivers/pinctrl/Kconfig
new file mode 100644
index 000000000..aeb5729fb
--- /dev/null
+++ b/kernel/drivers/pinctrl/Kconfig
@@ -0,0 +1,239 @@
+#
+# PINCTRL infrastructure and drivers
+#
+
+config PINCTRL
+ bool
+
+if PINCTRL
+
+menu "Pin controllers"
+ depends on PINCTRL
+
+config PINMUX
+ bool "Support pin multiplexing controllers" if COMPILE_TEST
+
+config PINCONF
+ bool "Support pin configuration controllers" if COMPILE_TEST
+
+config GENERIC_PINCONF
+ bool
+ select PINCONF
+
+config DEBUG_PINCTRL
+ bool "Debug PINCTRL calls"
+ depends on DEBUG_KERNEL
+ help
+ Say Y here to add some extra checks and diagnostics to PINCTRL calls.
+
+config PINCTRL_ADI2
+ bool "ADI pin controller driver"
+ depends on BLACKFIN
+ select PINMUX
+ select IRQ_DOMAIN
+ help
+ This is the pin controller and gpio driver for ADI BF54x, BF60x and
+ future processors. This option is selected automatically when specific
+ machine and arch are selected to build.
+
+config PINCTRL_AS3722
+ bool "Pinctrl and GPIO driver for ams AS3722 PMIC"
+ depends on MFD_AS3722 && GPIOLIB
+ select PINMUX
+ select GENERIC_PINCONF
+ help
+ AS3722 device supports the configuration of GPIO pins for different
+ functionality. This driver supports the pinmux, push-pull and
+ open drain configuration for the GPIO pins of AS3722 devices. It also
+ supports the GPIO functionality through gpiolib.
+
+config PINCTRL_BF54x
+ def_bool y if BF54x
+ select PINCTRL_ADI2
+
+config PINCTRL_BF60x
+ def_bool y if BF60x
+ select PINCTRL_ADI2
+
+config PINCTRL_AT91
+ bool "AT91 pinctrl driver"
+ depends on OF
+ depends on ARCH_AT91
+ select PINMUX
+ select PINCONF
+ select GPIOLIB
+ select OF_GPIO
+ select GPIOLIB_IRQCHIP
+ help
+ Say Y here to enable the at91 pinctrl driver
+
+config PINCTRL_AMD
+ bool "AMD GPIO pin control"
+ depends on GPIOLIB
+ select GPIOLIB_IRQCHIP
+ select PINCONF
+ select GENERIC_PINCONF
+ help
+ driver for memory mapped GPIO functionality on AMD platforms
+ (x86 or arm).Most pins are usually muxed to some other
+ functionality by firmware,so only a small amount is available
+ for gpio use.
+
+ Requires ACPI/FDT device enumeration code to set up a platform
+ device.
+
+config PINCTRL_LANTIQ
+ bool
+ depends on LANTIQ
+ select PINMUX
+ select PINCONF
+
+config PINCTRL_FALCON
+ bool
+ depends on SOC_FALCON
+ depends on PINCTRL_LANTIQ
+
+config PINCTRL_MESON
+ bool
+ depends on OF
+ select PINMUX
+ select PINCONF
+ select GENERIC_PINCONF
+ select GPIOLIB
+ select OF_GPIO
+ select REGMAP_MMIO
+
+config PINCTRL_ROCKCHIP
+ bool
+ select PINMUX
+ select GENERIC_PINCONF
+ select GENERIC_IRQ_CHIP
+ select MFD_SYSCON
+
+config PINCTRL_SINGLE
+ tristate "One-register-per-pin type device tree based pinctrl driver"
+ depends on OF
+ select PINMUX
+ select PINCONF
+ select GENERIC_PINCONF
+ help
+ This selects the device tree based generic pinctrl driver.
+
+config PINCTRL_SIRF
+ bool "CSR SiRFprimaII pin controller driver"
+ depends on ARCH_SIRF
+ select PINMUX
+ select GPIOLIB_IRQCHIP
+
+config PINCTRL_ST
+ bool
+ depends on OF
+ select PINMUX
+ select PINCONF
+ select GPIOLIB_IRQCHIP
+
+config PINCTRL_TEGRA
+ bool
+ select PINMUX
+ select PINCONF
+
+config PINCTRL_TEGRA20
+ bool
+ select PINCTRL_TEGRA
+
+config PINCTRL_TEGRA30
+ bool
+ select PINCTRL_TEGRA
+
+config PINCTRL_TEGRA114
+ bool
+ select PINCTRL_TEGRA
+
+config PINCTRL_TEGRA124
+ bool
+ select PINCTRL_TEGRA
+
+config PINCTRL_TEGRA210
+ bool
+ select PINCTRL_TEGRA
+
+config PINCTRL_TEGRA_XUSB
+ def_bool y if ARCH_TEGRA
+ select GENERIC_PHY
+ select PINCONF
+ select PINMUX
+
+config PINCTRL_TZ1090
+ bool "Toumaz Xenif TZ1090 pin control driver"
+ depends on SOC_TZ1090
+ select PINMUX
+ select GENERIC_PINCONF
+
+config PINCTRL_TZ1090_PDC
+ bool "Toumaz Xenif TZ1090 PDC pin control driver"
+ depends on SOC_TZ1090
+ select PINMUX
+ select PINCONF
+
+config PINCTRL_U300
+ bool "U300 pin controller driver"
+ depends on ARCH_U300
+ select PINMUX
+ select GENERIC_PINCONF
+
+config PINCTRL_COH901
+ bool "ST-Ericsson U300 COH 901 335/571 GPIO"
+ depends on GPIOLIB && ARCH_U300 && PINCTRL_U300
+ select GPIOLIB_IRQCHIP
+ help
+ Say yes here to support GPIO interface on ST-Ericsson U300.
+ The names of the two IP block variants supported are
+ COH 901 335 and COH 901 571/3. They contain 3, 5 or 7
+ ports of 8 GPIO pins each.
+
+config PINCTRL_PALMAS
+ bool "Pinctrl driver for the PALMAS Series MFD devices"
+ depends on OF && MFD_PALMAS
+ select PINMUX
+ select GENERIC_PINCONF
+ help
+ Palmas device supports the configuration of pins for different
+ functionality. This driver supports the pinmux, push-pull and
+ open drain configuration for the Palmas series devices like
+ TPS65913, TPS80036 etc.
+
+config PINCTRL_ZYNQ
+ bool "Pinctrl driver for Xilinx Zynq"
+ depends on ARCH_ZYNQ
+ select PINMUX
+ select GENERIC_PINCONF
+ help
+ This selectes the pinctrl driver for Xilinx Zynq.
+
+source "drivers/pinctrl/bcm/Kconfig"
+source "drivers/pinctrl/berlin/Kconfig"
+source "drivers/pinctrl/freescale/Kconfig"
+source "drivers/pinctrl/intel/Kconfig"
+source "drivers/pinctrl/mvebu/Kconfig"
+source "drivers/pinctrl/nomadik/Kconfig"
+source "drivers/pinctrl/qcom/Kconfig"
+source "drivers/pinctrl/samsung/Kconfig"
+source "drivers/pinctrl/sh-pfc/Kconfig"
+source "drivers/pinctrl/spear/Kconfig"
+source "drivers/pinctrl/sunxi/Kconfig"
+source "drivers/pinctrl/vt8500/Kconfig"
+source "drivers/pinctrl/mediatek/Kconfig"
+
+config PINCTRL_XWAY
+ bool
+ depends on SOC_TYPE_XWAY
+ depends on PINCTRL_LANTIQ
+
+config PINCTRL_TB10X
+ bool
+ depends on OF && ARC_PLAT_TB10X
+ select GPIOLIB
+
+endmenu
+
+endif