summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/pcmcia/ti113x.h
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/pcmcia/ti113x.h')
-rw-r--r--kernel/drivers/pcmcia/ti113x.h984
1 files changed, 984 insertions, 0 deletions
diff --git a/kernel/drivers/pcmcia/ti113x.h b/kernel/drivers/pcmcia/ti113x.h
new file mode 100644
index 000000000..a71789486
--- /dev/null
+++ b/kernel/drivers/pcmcia/ti113x.h
@@ -0,0 +1,984 @@
+/*
+ * ti113x.h 1.16 1999/10/25 20:03:34
+ *
+ * The contents of this file are subject to the Mozilla Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License
+ * at http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS"
+ * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+ * the License for the specific language governing rights and
+ * limitations under the License.
+ *
+ * The initial developer of the original code is David A. Hinds
+ * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
+ * are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU General Public License version 2 (the "GPL"), in which
+ * case the provisions of the GPL are applicable instead of the
+ * above. If you wish to allow the use of your version of this file
+ * only under the terms of the GPL and not to allow others to use
+ * your version of this file under the MPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice and
+ * other provisions required by the GPL. If you do not delete the
+ * provisions above, a recipient may use your version of this file
+ * under either the MPL or the GPL.
+ */
+
+#ifndef _LINUX_TI113X_H
+#define _LINUX_TI113X_H
+
+
+/* Register definitions for TI 113X PCI-to-CardBus bridges */
+
+/* System Control Register */
+#define TI113X_SYSTEM_CONTROL 0x0080 /* 32 bit */
+#define TI113X_SCR_SMIROUTE 0x04000000
+#define TI113X_SCR_SMISTATUS 0x02000000
+#define TI113X_SCR_SMIENB 0x01000000
+#define TI113X_SCR_VCCPROT 0x00200000
+#define TI113X_SCR_REDUCEZV 0x00100000
+#define TI113X_SCR_CDREQEN 0x00080000
+#define TI113X_SCR_CDMACHAN 0x00070000
+#define TI113X_SCR_SOCACTIVE 0x00002000
+#define TI113X_SCR_PWRSTREAM 0x00000800
+#define TI113X_SCR_DELAYUP 0x00000400
+#define TI113X_SCR_DELAYDOWN 0x00000200
+#define TI113X_SCR_INTERROGATE 0x00000100
+#define TI113X_SCR_CLKRUN_SEL 0x00000080
+#define TI113X_SCR_PWRSAVINGS 0x00000040
+#define TI113X_SCR_SUBSYSRW 0x00000020
+#define TI113X_SCR_CB_DPAR 0x00000010
+#define TI113X_SCR_CDMA_EN 0x00000008
+#define TI113X_SCR_ASYNC_IRQ 0x00000004
+#define TI113X_SCR_KEEPCLK 0x00000002
+#define TI113X_SCR_CLKRUN_ENA 0x00000001
+
+#define TI122X_SCR_SER_STEP 0xc0000000
+#define TI122X_SCR_INTRTIE 0x20000000
+#define TIXX21_SCR_TIEALL 0x10000000
+#define TI122X_SCR_CBRSVD 0x00400000
+#define TI122X_SCR_MRBURSTDN 0x00008000
+#define TI122X_SCR_MRBURSTUP 0x00004000
+#define TI122X_SCR_RIMUX 0x00000001
+
+/* Multimedia Control Register */
+#define TI1250_MULTIMEDIA_CTL 0x0084 /* 8 bit */
+#define TI1250_MMC_ZVOUTEN 0x80
+#define TI1250_MMC_PORTSEL 0x40
+#define TI1250_MMC_ZVEN1 0x02
+#define TI1250_MMC_ZVEN0 0x01
+
+#define TI1250_GENERAL_STATUS 0x0085 /* 8 bit */
+#define TI1250_GPIO0_CONTROL 0x0088 /* 8 bit */
+#define TI1250_GPIO1_CONTROL 0x0089 /* 8 bit */
+#define TI1250_GPIO2_CONTROL 0x008a /* 8 bit */
+#define TI1250_GPIO3_CONTROL 0x008b /* 8 bit */
+#define TI1250_GPIO_MODE_MASK 0xc0
+
+/* IRQMUX/MFUNC Register */
+#define TI122X_MFUNC 0x008c /* 32 bit */
+#define TI122X_MFUNC0_MASK 0x0000000f
+#define TI122X_MFUNC1_MASK 0x000000f0
+#define TI122X_MFUNC2_MASK 0x00000f00
+#define TI122X_MFUNC3_MASK 0x0000f000
+#define TI122X_MFUNC4_MASK 0x000f0000
+#define TI122X_MFUNC5_MASK 0x00f00000
+#define TI122X_MFUNC6_MASK 0x0f000000
+
+#define TI122X_MFUNC0_INTA 0x00000002
+#define TI125X_MFUNC0_INTB 0x00000001
+#define TI122X_MFUNC1_INTB 0x00000020
+#define TI122X_MFUNC3_IRQSER 0x00001000
+
+
+/* Retry Status Register */
+#define TI113X_RETRY_STATUS 0x0090 /* 8 bit */
+#define TI113X_RSR_PCIRETRY 0x80
+#define TI113X_RSR_CBRETRY 0x40
+#define TI113X_RSR_TEXP_CBB 0x20
+#define TI113X_RSR_MEXP_CBB 0x10
+#define TI113X_RSR_TEXP_CBA 0x08
+#define TI113X_RSR_MEXP_CBA 0x04
+#define TI113X_RSR_TEXP_PCI 0x02
+#define TI113X_RSR_MEXP_PCI 0x01
+
+/* Card Control Register */
+#define TI113X_CARD_CONTROL 0x0091 /* 8 bit */
+#define TI113X_CCR_RIENB 0x80
+#define TI113X_CCR_ZVENABLE 0x40
+#define TI113X_CCR_PCI_IRQ_ENA 0x20
+#define TI113X_CCR_PCI_IREQ 0x10
+#define TI113X_CCR_PCI_CSC 0x08
+#define TI113X_CCR_SPKROUTEN 0x02
+#define TI113X_CCR_IFG 0x01
+
+#define TI1220_CCR_PORT_SEL 0x20
+#define TI122X_CCR_AUD2MUX 0x04
+
+/* Device Control Register */
+#define TI113X_DEVICE_CONTROL 0x0092 /* 8 bit */
+#define TI113X_DCR_5V_FORCE 0x40
+#define TI113X_DCR_3V_FORCE 0x20
+#define TI113X_DCR_IMODE_MASK 0x06
+#define TI113X_DCR_IMODE_ISA 0x02
+#define TI113X_DCR_IMODE_SERIAL 0x04
+
+#define TI12XX_DCR_IMODE_PCI_ONLY 0x00
+#define TI12XX_DCR_IMODE_ALL_SERIAL 0x06
+
+/* Buffer Control Register */
+#define TI113X_BUFFER_CONTROL 0x0093 /* 8 bit */
+#define TI113X_BCR_CB_READ_DEPTH 0x08
+#define TI113X_BCR_CB_WRITE_DEPTH 0x04
+#define TI113X_BCR_PCI_READ_DEPTH 0x02
+#define TI113X_BCR_PCI_WRITE_DEPTH 0x01
+
+/* Diagnostic Register */
+#define TI1250_DIAGNOSTIC 0x0093 /* 8 bit */
+#define TI1250_DIAG_TRUE_VALUE 0x80
+#define TI1250_DIAG_PCI_IREQ 0x40
+#define TI1250_DIAG_PCI_CSC 0x20
+#define TI1250_DIAG_ASYNC_CSC 0x01
+
+/* DMA Registers */
+#define TI113X_DMA_0 0x0094 /* 32 bit */
+#define TI113X_DMA_1 0x0098 /* 32 bit */
+
+/* ExCA IO offset registers */
+#define TI113X_IO_OFFSET(map) (0x36+((map)<<1))
+
+/* EnE test register */
+#define ENE_TEST_C9 0xc9 /* 8bit */
+#define ENE_TEST_C9_TLTENABLE 0x02
+#define ENE_TEST_C9_PFENABLE_F0 0x04
+#define ENE_TEST_C9_PFENABLE_F1 0x08
+#define ENE_TEST_C9_PFENABLE (ENE_TEST_C9_PFENABLE_F0 | ENE_TEST_C9_PFENABLE_F1)
+#define ENE_TEST_C9_WPDISALBLE_F0 0x40
+#define ENE_TEST_C9_WPDISALBLE_F1 0x80
+#define ENE_TEST_C9_WPDISALBLE (ENE_TEST_C9_WPDISALBLE_F0 | ENE_TEST_C9_WPDISALBLE_F1)
+
+/*
+ * Texas Instruments CardBus controller overrides.
+ */
+#define ti_sysctl(socket) ((socket)->private[0])
+#define ti_cardctl(socket) ((socket)->private[1])
+#define ti_devctl(socket) ((socket)->private[2])
+#define ti_diag(socket) ((socket)->private[3])
+#define ti_mfunc(socket) ((socket)->private[4])
+#define ene_test_c9(socket) ((socket)->private[5])
+
+/*
+ * These are the TI specific power management handlers.
+ */
+static void ti_save_state(struct yenta_socket *socket)
+{
+ ti_sysctl(socket) = config_readl(socket, TI113X_SYSTEM_CONTROL);
+ ti_mfunc(socket) = config_readl(socket, TI122X_MFUNC);
+ ti_cardctl(socket) = config_readb(socket, TI113X_CARD_CONTROL);
+ ti_devctl(socket) = config_readb(socket, TI113X_DEVICE_CONTROL);
+ ti_diag(socket) = config_readb(socket, TI1250_DIAGNOSTIC);
+
+ if (socket->dev->vendor == PCI_VENDOR_ID_ENE)
+ ene_test_c9(socket) = config_readb(socket, ENE_TEST_C9);
+}
+
+static void ti_restore_state(struct yenta_socket *socket)
+{
+ config_writel(socket, TI113X_SYSTEM_CONTROL, ti_sysctl(socket));
+ config_writel(socket, TI122X_MFUNC, ti_mfunc(socket));
+ config_writeb(socket, TI113X_CARD_CONTROL, ti_cardctl(socket));
+ config_writeb(socket, TI113X_DEVICE_CONTROL, ti_devctl(socket));
+ config_writeb(socket, TI1250_DIAGNOSTIC, ti_diag(socket));
+
+ if (socket->dev->vendor == PCI_VENDOR_ID_ENE)
+ config_writeb(socket, ENE_TEST_C9, ene_test_c9(socket));
+}
+
+/*
+ * Zoom video control for TI122x/113x chips
+ */
+
+static void ti_zoom_video(struct pcmcia_socket *sock, int onoff)
+{
+ u8 reg;
+ struct yenta_socket *socket = container_of(sock, struct yenta_socket, socket);
+
+ /* If we don't have a Zoom Video switch this is harmless,
+ we just tristate the unused (ZV) lines */
+ reg = config_readb(socket, TI113X_CARD_CONTROL);
+ if (onoff)
+ /* Zoom zoom, we will all go together, zoom zoom, zoom zoom */
+ reg |= TI113X_CCR_ZVENABLE;
+ else
+ reg &= ~TI113X_CCR_ZVENABLE;
+ config_writeb(socket, TI113X_CARD_CONTROL, reg);
+}
+
+/*
+ * The 145x series can also use this. They have an additional
+ * ZV autodetect mode we don't use but don't actually need.
+ * FIXME: manual says its in func0 and func1 but disagrees with
+ * itself about this - do we need to force func0, if so we need
+ * to know a lot more about socket pairings in pcmcia_socket than
+ * we do now.. uggh.
+ */
+
+static void ti1250_zoom_video(struct pcmcia_socket *sock, int onoff)
+{
+ struct yenta_socket *socket = container_of(sock, struct yenta_socket, socket);
+ int shift = 0;
+ u8 reg;
+
+ ti_zoom_video(sock, onoff);
+
+ reg = config_readb(socket, TI1250_MULTIMEDIA_CTL);
+ reg |= TI1250_MMC_ZVOUTEN; /* ZV bus enable */
+
+ if(PCI_FUNC(socket->dev->devfn)==1)
+ shift = 1;
+
+ if(onoff)
+ {
+ reg &= ~(1<<6); /* Clear select bit */
+ reg |= shift<<6; /* Favour our socket */
+ reg |= 1<<shift; /* Socket zoom video on */
+ }
+ else
+ {
+ reg &= ~(1<<6); /* Clear select bit */
+ reg |= (1^shift)<<6; /* Favour other socket */
+ reg &= ~(1<<shift); /* Socket zoon video off */
+ }
+
+ config_writeb(socket, TI1250_MULTIMEDIA_CTL, reg);
+}
+
+static void ti_set_zv(struct yenta_socket *socket)
+{
+ if(socket->dev->vendor == PCI_VENDOR_ID_TI)
+ {
+ switch(socket->dev->device)
+ {
+ /* There may be more .. */
+ case PCI_DEVICE_ID_TI_1220:
+ case PCI_DEVICE_ID_TI_1221:
+ case PCI_DEVICE_ID_TI_1225:
+ case PCI_DEVICE_ID_TI_4510:
+ socket->socket.zoom_video = ti_zoom_video;
+ break;
+ case PCI_DEVICE_ID_TI_1250:
+ case PCI_DEVICE_ID_TI_1251A:
+ case PCI_DEVICE_ID_TI_1251B:
+ case PCI_DEVICE_ID_TI_1450:
+ socket->socket.zoom_video = ti1250_zoom_video;
+ }
+ }
+}
+
+
+/*
+ * Generic TI init - TI has an extension for the
+ * INTCTL register that sets the PCI CSC interrupt.
+ * Make sure we set it correctly at open and init
+ * time
+ * - override: disable the PCI CSC interrupt. This makes
+ * it possible to use the CSC interrupt to probe the
+ * ISA interrupts.
+ * - init: set the interrupt to match our PCI state.
+ * This makes us correctly get PCI CSC interrupt
+ * events.
+ */
+static int ti_init(struct yenta_socket *socket)
+{
+ u8 new, reg = exca_readb(socket, I365_INTCTL);
+
+ new = reg & ~I365_INTR_ENA;
+ if (socket->dev->irq)
+ new |= I365_INTR_ENA;
+ if (new != reg)
+ exca_writeb(socket, I365_INTCTL, new);
+ return 0;
+}
+
+static int ti_override(struct yenta_socket *socket)
+{
+ u8 new, reg = exca_readb(socket, I365_INTCTL);
+
+ new = reg & ~I365_INTR_ENA;
+ if (new != reg)
+ exca_writeb(socket, I365_INTCTL, new);
+
+ ti_set_zv(socket);
+
+ return 0;
+}
+
+static void ti113x_use_isa_irq(struct yenta_socket *socket)
+{
+ int isa_irq = -1;
+ u8 intctl;
+ u32 isa_irq_mask = 0;
+
+ if (!isa_probe)
+ return;
+
+ /* get a free isa int */
+ isa_irq_mask = yenta_probe_irq(socket, isa_interrupts);
+ if (!isa_irq_mask)
+ return; /* no useable isa irq found */
+
+ /* choose highest available */
+ for (; isa_irq_mask; isa_irq++)
+ isa_irq_mask >>= 1;
+ socket->cb_irq = isa_irq;
+
+ exca_writeb(socket, I365_CSCINT, (isa_irq << 4));
+
+ intctl = exca_readb(socket, I365_INTCTL);
+ intctl &= ~(I365_INTR_ENA | I365_IRQ_MASK); /* CSC Enable */
+ exca_writeb(socket, I365_INTCTL, intctl);
+
+ dev_info(&socket->dev->dev,
+ "Yenta TI113x: using isa irq %d for CardBus\n", isa_irq);
+}
+
+
+static int ti113x_override(struct yenta_socket *socket)
+{
+ u8 cardctl;
+
+ cardctl = config_readb(socket, TI113X_CARD_CONTROL);
+ cardctl &= ~(TI113X_CCR_PCI_IRQ_ENA | TI113X_CCR_PCI_IREQ | TI113X_CCR_PCI_CSC);
+ if (socket->dev->irq)
+ cardctl |= TI113X_CCR_PCI_IRQ_ENA | TI113X_CCR_PCI_CSC | TI113X_CCR_PCI_IREQ;
+ else
+ ti113x_use_isa_irq(socket);
+
+ config_writeb(socket, TI113X_CARD_CONTROL, cardctl);
+
+ return ti_override(socket);
+}
+
+
+/* irqrouting for func0, probes PCI interrupt and ISA interrupts */
+static void ti12xx_irqroute_func0(struct yenta_socket *socket)
+{
+ u32 mfunc, mfunc_old, devctl;
+ u8 gpio3, gpio3_old;
+ int pci_irq_status;
+
+ mfunc = mfunc_old = config_readl(socket, TI122X_MFUNC);
+ devctl = config_readb(socket, TI113X_DEVICE_CONTROL);
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "TI: mfunc 0x%08x, devctl 0x%02x\n", mfunc, devctl);
+
+ /* make sure PCI interrupts are enabled before probing */
+ ti_init(socket);
+
+ /* test PCI interrupts first. only try fixing if return value is 0! */
+ pci_irq_status = yenta_probe_cb_irq(socket);
+ if (pci_irq_status)
+ goto out;
+
+ /*
+ * We're here which means PCI interrupts are _not_ delivered. try to
+ * find the right setting (all serial or parallel)
+ */
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "TI: probing PCI interrupt failed, trying to fix\n");
+
+ /* for serial PCI make sure MFUNC3 is set to IRQSER */
+ if ((devctl & TI113X_DCR_IMODE_MASK) == TI12XX_DCR_IMODE_ALL_SERIAL) {
+ switch (socket->dev->device) {
+ case PCI_DEVICE_ID_TI_1250:
+ case PCI_DEVICE_ID_TI_1251A:
+ case PCI_DEVICE_ID_TI_1251B:
+ case PCI_DEVICE_ID_TI_1450:
+ case PCI_DEVICE_ID_TI_1451A:
+ case PCI_DEVICE_ID_TI_4450:
+ case PCI_DEVICE_ID_TI_4451:
+ /* these chips have no IRQSER setting in MFUNC3 */
+ break;
+
+ default:
+ mfunc = (mfunc & ~TI122X_MFUNC3_MASK) | TI122X_MFUNC3_IRQSER;
+
+ /* write down if changed, probe */
+ if (mfunc != mfunc_old) {
+ config_writel(socket, TI122X_MFUNC, mfunc);
+
+ pci_irq_status = yenta_probe_cb_irq(socket);
+ if (pci_irq_status == 1) {
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "TI: all-serial interrupts ok\n");
+ mfunc_old = mfunc;
+ goto out;
+ }
+
+ /* not working, back to old value */
+ mfunc = mfunc_old;
+ config_writel(socket, TI122X_MFUNC, mfunc);
+
+ if (pci_irq_status == -1)
+ goto out;
+ }
+ }
+
+ /* serial PCI interrupts not working fall back to parallel */
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "TI: falling back to parallel PCI interrupts\n");
+ devctl &= ~TI113X_DCR_IMODE_MASK;
+ devctl |= TI113X_DCR_IMODE_SERIAL; /* serial ISA could be right */
+ config_writeb(socket, TI113X_DEVICE_CONTROL, devctl);
+ }
+
+ /* parallel PCI interrupts: route INTA */
+ switch (socket->dev->device) {
+ case PCI_DEVICE_ID_TI_1250:
+ case PCI_DEVICE_ID_TI_1251A:
+ case PCI_DEVICE_ID_TI_1251B:
+ case PCI_DEVICE_ID_TI_1450:
+ /* make sure GPIO3 is set to INTA */
+ gpio3 = gpio3_old = config_readb(socket, TI1250_GPIO3_CONTROL);
+ gpio3 &= ~TI1250_GPIO_MODE_MASK;
+ if (gpio3 != gpio3_old)
+ config_writeb(socket, TI1250_GPIO3_CONTROL, gpio3);
+ break;
+
+ default:
+ gpio3 = gpio3_old = 0;
+
+ mfunc = (mfunc & ~TI122X_MFUNC0_MASK) | TI122X_MFUNC0_INTA;
+ if (mfunc != mfunc_old)
+ config_writel(socket, TI122X_MFUNC, mfunc);
+ }
+
+ /* time to probe again */
+ pci_irq_status = yenta_probe_cb_irq(socket);
+ if (pci_irq_status == 1) {
+ mfunc_old = mfunc;
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "TI: parallel PCI interrupts ok\n");
+ } else {
+ /* not working, back to old value */
+ mfunc = mfunc_old;
+ config_writel(socket, TI122X_MFUNC, mfunc);
+ if (gpio3 != gpio3_old)
+ config_writeb(socket, TI1250_GPIO3_CONTROL, gpio3_old);
+ }
+
+out:
+ if (pci_irq_status < 1) {
+ socket->cb_irq = 0;
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "Yenta TI: no PCI interrupts. Fish. "
+ "Please report.\n");
+ }
+}
+
+
+/* changes the irq of func1 to match that of func0 */
+static int ti12xx_align_irqs(struct yenta_socket *socket, int *old_irq)
+{
+ struct pci_dev *func0;
+
+ /* find func0 device */
+ func0 = pci_get_slot(socket->dev->bus, socket->dev->devfn & ~0x07);
+ if (!func0)
+ return 0;
+
+ if (old_irq)
+ *old_irq = socket->cb_irq;
+ socket->cb_irq = socket->dev->irq = func0->irq;
+
+ pci_dev_put(func0);
+
+ return 1;
+}
+
+/*
+ * ties INTA and INTB together. also changes the devices irq to that of
+ * the function 0 device. call from func1 only.
+ * returns 1 if INTRTIE changed, 0 otherwise.
+ */
+static int ti12xx_tie_interrupts(struct yenta_socket *socket, int *old_irq)
+{
+ u32 sysctl;
+ int ret;
+
+ sysctl = config_readl(socket, TI113X_SYSTEM_CONTROL);
+ if (sysctl & TI122X_SCR_INTRTIE)
+ return 0;
+
+ /* align */
+ ret = ti12xx_align_irqs(socket, old_irq);
+ if (!ret)
+ return 0;
+
+ /* tie */
+ sysctl |= TI122X_SCR_INTRTIE;
+ config_writel(socket, TI113X_SYSTEM_CONTROL, sysctl);
+
+ return 1;
+}
+
+/* undo what ti12xx_tie_interrupts() did */
+static void ti12xx_untie_interrupts(struct yenta_socket *socket, int old_irq)
+{
+ u32 sysctl = config_readl(socket, TI113X_SYSTEM_CONTROL);
+ sysctl &= ~TI122X_SCR_INTRTIE;
+ config_writel(socket, TI113X_SYSTEM_CONTROL, sysctl);
+
+ socket->cb_irq = socket->dev->irq = old_irq;
+}
+
+/*
+ * irqrouting for func1, plays with INTB routing
+ * only touches MFUNC for INTB routing. all other bits are taken
+ * care of in func0 already.
+ */
+static void ti12xx_irqroute_func1(struct yenta_socket *socket)
+{
+ u32 mfunc, mfunc_old, devctl, sysctl;
+ int pci_irq_status;
+
+ mfunc = mfunc_old = config_readl(socket, TI122X_MFUNC);
+ devctl = config_readb(socket, TI113X_DEVICE_CONTROL);
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "TI: mfunc 0x%08x, devctl 0x%02x\n",
+ mfunc, devctl);
+
+ /* if IRQs are configured as tied, align irq of func1 with func0 */
+ sysctl = config_readl(socket, TI113X_SYSTEM_CONTROL);
+ if (sysctl & TI122X_SCR_INTRTIE)
+ ti12xx_align_irqs(socket, NULL);
+
+ /* make sure PCI interrupts are enabled before probing */
+ ti_init(socket);
+
+ /* test PCI interrupts first. only try fixing if return value is 0! */
+ pci_irq_status = yenta_probe_cb_irq(socket);
+ if (pci_irq_status)
+ goto out;
+
+ /*
+ * We're here which means PCI interrupts are _not_ delivered. try to
+ * find the right setting
+ */
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "TI: probing PCI interrupt failed, trying to fix\n");
+
+ /* if all serial: set INTRTIE, probe again */
+ if ((devctl & TI113X_DCR_IMODE_MASK) == TI12XX_DCR_IMODE_ALL_SERIAL) {
+ int old_irq;
+
+ if (ti12xx_tie_interrupts(socket, &old_irq)) {
+ pci_irq_status = yenta_probe_cb_irq(socket);
+ if (pci_irq_status == 1) {
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "TI: all-serial interrupts, tied ok\n");
+ goto out;
+ }
+
+ ti12xx_untie_interrupts(socket, old_irq);
+ }
+ }
+ /* parallel PCI: route INTB, probe again */
+ else {
+ int old_irq;
+
+ switch (socket->dev->device) {
+ case PCI_DEVICE_ID_TI_1250:
+ /* the 1250 has one pin for IRQSER/INTB depending on devctl */
+ break;
+
+ case PCI_DEVICE_ID_TI_1251A:
+ case PCI_DEVICE_ID_TI_1251B:
+ case PCI_DEVICE_ID_TI_1450:
+ /*
+ * those have a pin for IRQSER/INTB plus INTB in MFUNC0
+ * we alread probed the shared pin, now go for MFUNC0
+ */
+ mfunc = (mfunc & ~TI122X_MFUNC0_MASK) | TI125X_MFUNC0_INTB;
+ break;
+
+ default:
+ mfunc = (mfunc & ~TI122X_MFUNC1_MASK) | TI122X_MFUNC1_INTB;
+ break;
+ }
+
+ /* write, probe */
+ if (mfunc != mfunc_old) {
+ config_writel(socket, TI122X_MFUNC, mfunc);
+
+ pci_irq_status = yenta_probe_cb_irq(socket);
+ if (pci_irq_status == 1) {
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "TI: parallel PCI interrupts ok\n");
+ goto out;
+ }
+
+ mfunc = mfunc_old;
+ config_writel(socket, TI122X_MFUNC, mfunc);
+
+ if (pci_irq_status == -1)
+ goto out;
+ }
+
+ /* still nothing: set INTRTIE */
+ if (ti12xx_tie_interrupts(socket, &old_irq)) {
+ pci_irq_status = yenta_probe_cb_irq(socket);
+ if (pci_irq_status == 1) {
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "TI: parallel PCI interrupts, tied ok\n");
+ goto out;
+ }
+
+ ti12xx_untie_interrupts(socket, old_irq);
+ }
+ }
+
+out:
+ if (pci_irq_status < 1) {
+ socket->cb_irq = 0;
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "TI: no PCI interrupts. Fish. Please report.\n");
+ }
+}
+
+
+/* Returns true value if the second slot of a two-slot controller is empty */
+static int ti12xx_2nd_slot_empty(struct yenta_socket *socket)
+{
+ struct pci_dev *func;
+ struct yenta_socket *slot2;
+ int devfn;
+ unsigned int state;
+ int ret = 1;
+ u32 sysctl;
+
+ /* catch the two-slot controllers */
+ switch (socket->dev->device) {
+ case PCI_DEVICE_ID_TI_1220:
+ case PCI_DEVICE_ID_TI_1221:
+ case PCI_DEVICE_ID_TI_1225:
+ case PCI_DEVICE_ID_TI_1251A:
+ case PCI_DEVICE_ID_TI_1251B:
+ case PCI_DEVICE_ID_TI_1420:
+ case PCI_DEVICE_ID_TI_1450:
+ case PCI_DEVICE_ID_TI_1451A:
+ case PCI_DEVICE_ID_TI_1520:
+ case PCI_DEVICE_ID_TI_1620:
+ case PCI_DEVICE_ID_TI_4520:
+ case PCI_DEVICE_ID_TI_4450:
+ case PCI_DEVICE_ID_TI_4451:
+ /*
+ * there are way more, but they need to be added in yenta_socket.c
+ * and pci_ids.h first anyway.
+ */
+ break;
+
+ case PCI_DEVICE_ID_TI_XX12:
+ case PCI_DEVICE_ID_TI_X515:
+ case PCI_DEVICE_ID_TI_X420:
+ case PCI_DEVICE_ID_TI_X620:
+ case PCI_DEVICE_ID_TI_XX21_XX11:
+ case PCI_DEVICE_ID_TI_7410:
+ case PCI_DEVICE_ID_TI_7610:
+ /*
+ * those are either single or dual slot CB with additional functions
+ * like 1394, smartcard reader, etc. check the TIEALL flag for them
+ * the TIEALL flag binds the IRQ of all functions together.
+ * we catch the single slot variants later.
+ */
+ sysctl = config_readl(socket, TI113X_SYSTEM_CONTROL);
+ if (sysctl & TIXX21_SCR_TIEALL)
+ return 0;
+
+ break;
+
+ /* single-slot controllers have the 2nd slot empty always :) */
+ default:
+ return 1;
+ }
+
+ /* get other slot */
+ devfn = socket->dev->devfn & ~0x07;
+ func = pci_get_slot(socket->dev->bus,
+ (socket->dev->devfn & 0x07) ? devfn : devfn | 0x01);
+ if (!func)
+ return 1;
+
+ /*
+ * check that the device id of both slots match. this is needed for the
+ * XX21 and the XX11 controller that share the same device id for single
+ * and dual slot controllers. return '2nd slot empty'. we already checked
+ * if the interrupt is tied to another function.
+ */
+ if (socket->dev->device != func->device)
+ goto out;
+
+ slot2 = pci_get_drvdata(func);
+ if (!slot2)
+ goto out;
+
+ /* check state */
+ yenta_get_status(&slot2->socket, &state);
+ if (state & SS_DETECT) {
+ ret = 0;
+ goto out;
+ }
+
+out:
+ pci_dev_put(func);
+ return ret;
+}
+
+/*
+ * TI specifiy parts for the power hook.
+ *
+ * some TI's with some CB's produces interrupt storm on power on. it has been
+ * seen with atheros wlan cards on TI1225 and TI1410. solution is simply to
+ * disable any CB interrupts during this time.
+ */
+static int ti12xx_power_hook(struct pcmcia_socket *sock, int operation)
+{
+ struct yenta_socket *socket = container_of(sock, struct yenta_socket, socket);
+ u32 mfunc, devctl, sysctl;
+ u8 gpio3;
+
+ /* only POWER_PRE and POWER_POST are interesting */
+ if ((operation != HOOK_POWER_PRE) && (operation != HOOK_POWER_POST))
+ return 0;
+
+ devctl = config_readb(socket, TI113X_DEVICE_CONTROL);
+ sysctl = config_readl(socket, TI113X_SYSTEM_CONTROL);
+ mfunc = config_readl(socket, TI122X_MFUNC);
+
+ /*
+ * all serial/tied: only disable when modparm set. always doing it
+ * would mean a regression for working setups 'cos it disables the
+ * interrupts for both both slots on 2-slot controllers
+ * (and users of single slot controllers where it's save have to
+ * live with setting the modparm, most don't have to anyway)
+ */
+ if (((devctl & TI113X_DCR_IMODE_MASK) == TI12XX_DCR_IMODE_ALL_SERIAL) &&
+ (pwr_irqs_off || ti12xx_2nd_slot_empty(socket))) {
+ switch (socket->dev->device) {
+ case PCI_DEVICE_ID_TI_1250:
+ case PCI_DEVICE_ID_TI_1251A:
+ case PCI_DEVICE_ID_TI_1251B:
+ case PCI_DEVICE_ID_TI_1450:
+ case PCI_DEVICE_ID_TI_1451A:
+ case PCI_DEVICE_ID_TI_4450:
+ case PCI_DEVICE_ID_TI_4451:
+ /* these chips have no IRQSER setting in MFUNC3 */
+ break;
+
+ default:
+ if (operation == HOOK_POWER_PRE)
+ mfunc = (mfunc & ~TI122X_MFUNC3_MASK);
+ else
+ mfunc = (mfunc & ~TI122X_MFUNC3_MASK) | TI122X_MFUNC3_IRQSER;
+ }
+
+ return 0;
+ }
+
+ /* do the job differently for func0/1 */
+ if ((PCI_FUNC(socket->dev->devfn) == 0) ||
+ ((sysctl & TI122X_SCR_INTRTIE) &&
+ (pwr_irqs_off || ti12xx_2nd_slot_empty(socket)))) {
+ /* some bridges are different */
+ switch (socket->dev->device) {
+ case PCI_DEVICE_ID_TI_1250:
+ case PCI_DEVICE_ID_TI_1251A:
+ case PCI_DEVICE_ID_TI_1251B:
+ case PCI_DEVICE_ID_TI_1450:
+ /* those oldies use gpio3 for INTA */
+ gpio3 = config_readb(socket, TI1250_GPIO3_CONTROL);
+ if (operation == HOOK_POWER_PRE)
+ gpio3 = (gpio3 & ~TI1250_GPIO_MODE_MASK) | 0x40;
+ else
+ gpio3 &= ~TI1250_GPIO_MODE_MASK;
+ config_writeb(socket, TI1250_GPIO3_CONTROL, gpio3);
+ break;
+
+ default:
+ /* all new bridges are the same */
+ if (operation == HOOK_POWER_PRE)
+ mfunc &= ~TI122X_MFUNC0_MASK;
+ else
+ mfunc |= TI122X_MFUNC0_INTA;
+ config_writel(socket, TI122X_MFUNC, mfunc);
+ }
+ } else {
+ switch (socket->dev->device) {
+ case PCI_DEVICE_ID_TI_1251A:
+ case PCI_DEVICE_ID_TI_1251B:
+ case PCI_DEVICE_ID_TI_1450:
+ /* those have INTA elsewhere and INTB in MFUNC0 */
+ if (operation == HOOK_POWER_PRE)
+ mfunc &= ~TI122X_MFUNC0_MASK;
+ else
+ mfunc |= TI125X_MFUNC0_INTB;
+ config_writel(socket, TI122X_MFUNC, mfunc);
+
+ break;
+
+ default:
+ /* all new bridges are the same */
+ if (operation == HOOK_POWER_PRE)
+ mfunc &= ~TI122X_MFUNC1_MASK;
+ else
+ mfunc |= TI122X_MFUNC1_INTB;
+ config_writel(socket, TI122X_MFUNC, mfunc);
+ }
+ }
+
+ return 0;
+}
+
+static int ti12xx_override(struct yenta_socket *socket)
+{
+ u32 val, val_orig;
+
+ /* make sure that memory burst is active */
+ val_orig = val = config_readl(socket, TI113X_SYSTEM_CONTROL);
+ if (disable_clkrun && PCI_FUNC(socket->dev->devfn) == 0) {
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "Disabling CLKRUN feature\n");
+ val |= TI113X_SCR_KEEPCLK;
+ }
+ if (!(val & TI122X_SCR_MRBURSTUP)) {
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "Enabling burst memory read transactions\n");
+ val |= TI122X_SCR_MRBURSTUP;
+ }
+ if (val_orig != val)
+ config_writel(socket, TI113X_SYSTEM_CONTROL, val);
+
+ /*
+ * Yenta expects controllers to use CSCINT to route
+ * CSC interrupts to PCI rather than INTVAL.
+ */
+ val = config_readb(socket, TI1250_DIAGNOSTIC);
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "Using %s to route CSC interrupts to PCI\n",
+ (val & TI1250_DIAG_PCI_CSC) ? "CSCINT" : "INTVAL");
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "Routing CardBus interrupts to %s\n",
+ (val & TI1250_DIAG_PCI_IREQ) ? "PCI" : "ISA");
+
+ /* do irqrouting, depending on function */
+ if (PCI_FUNC(socket->dev->devfn) == 0)
+ ti12xx_irqroute_func0(socket);
+ else
+ ti12xx_irqroute_func1(socket);
+
+ /* install power hook */
+ socket->socket.power_hook = ti12xx_power_hook;
+
+ return ti_override(socket);
+}
+
+
+static int ti1250_override(struct yenta_socket *socket)
+{
+ u8 old, diag;
+
+ old = config_readb(socket, TI1250_DIAGNOSTIC);
+ diag = old & ~(TI1250_DIAG_PCI_CSC | TI1250_DIAG_PCI_IREQ);
+ if (socket->cb_irq)
+ diag |= TI1250_DIAG_PCI_CSC | TI1250_DIAG_PCI_IREQ;
+
+ if (diag != old) {
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "adjusting diagnostic: %02x -> %02x\n",
+ old, diag);
+ config_writeb(socket, TI1250_DIAGNOSTIC, diag);
+ }
+
+ return ti12xx_override(socket);
+}
+
+
+/**
+ * EnE specific part. EnE bridges are register compatible with TI bridges but
+ * have their own test registers and more important their own little problems.
+ * Some fixup code to make everybody happy (TM).
+ */
+
+#ifdef CONFIG_YENTA_ENE_TUNE
+/*
+ * set/clear various test bits:
+ * Defaults to clear the bit.
+ * - mask (u8) defines what bits to change
+ * - bits (u8) is the values to change them to
+ * -> it's
+ * current = (current & ~mask) | bits
+ */
+/* pci ids of devices that wants to have the bit set */
+#define DEVID(_vend,_dev,_subvend,_subdev,mask,bits) { \
+ .vendor = _vend, \
+ .device = _dev, \
+ .subvendor = _subvend, \
+ .subdevice = _subdev, \
+ .driver_data = ((mask) << 8 | (bits)), \
+ }
+static struct pci_device_id ene_tune_tbl[] = {
+ /* Echo Audio products based on motorola DSP56301 and DSP56361 */
+ DEVID(PCI_VENDOR_ID_MOTOROLA, 0x1801, 0xECC0, PCI_ANY_ID,
+ ENE_TEST_C9_TLTENABLE | ENE_TEST_C9_PFENABLE, ENE_TEST_C9_TLTENABLE),
+ DEVID(PCI_VENDOR_ID_MOTOROLA, 0x3410, 0xECC0, PCI_ANY_ID,
+ ENE_TEST_C9_TLTENABLE | ENE_TEST_C9_PFENABLE, ENE_TEST_C9_TLTENABLE),
+
+ {}
+};
+
+static void ene_tune_bridge(struct pcmcia_socket *sock, struct pci_bus *bus)
+{
+ struct yenta_socket *socket = container_of(sock, struct yenta_socket, socket);
+ struct pci_dev *dev;
+ struct pci_device_id *id = NULL;
+ u8 test_c9, old_c9, mask, bits;
+
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ id = (struct pci_device_id *) pci_match_id(ene_tune_tbl, dev);
+ if (id)
+ break;
+ }
+
+ test_c9 = old_c9 = config_readb(socket, ENE_TEST_C9);
+ if (id) {
+ mask = (id->driver_data >> 8) & 0xFF;
+ bits = id->driver_data & 0xFF;
+
+ test_c9 = (test_c9 & ~mask) | bits;
+ }
+ else
+ /* default to clear TLTEnable bit, old behaviour */
+ test_c9 &= ~ENE_TEST_C9_TLTENABLE;
+
+ dev_printk(KERN_INFO, &socket->dev->dev,
+ "EnE: chaning testregister 0xC9, %02x -> %02x\n",
+ old_c9, test_c9);
+ config_writeb(socket, ENE_TEST_C9, test_c9);
+}
+
+static int ene_override(struct yenta_socket *socket)
+{
+ /* install tune_bridge() function */
+ socket->socket.tune_bridge = ene_tune_bridge;
+
+ return ti1250_override(socket);
+}
+#else
+# define ene_override ti1250_override
+#endif /* !CONFIG_YENTA_ENE_TUNE */
+
+#endif /* _LINUX_TI113X_H */
+