summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/pci/quirks.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/pci/quirks.c')
-rw-r--r--kernel/drivers/pci/quirks.c4015
1 files changed, 4015 insertions, 0 deletions
diff --git a/kernel/drivers/pci/quirks.c b/kernel/drivers/pci/quirks.c
new file mode 100644
index 000000000..c6dc1dfd2
--- /dev/null
+++ b/kernel/drivers/pci/quirks.c
@@ -0,0 +1,4015 @@
+/*
+ * This file contains work-arounds for many known PCI hardware
+ * bugs. Devices present only on certain architectures (host
+ * bridges et cetera) should be handled in arch-specific code.
+ *
+ * Note: any quirks for hotpluggable devices must _NOT_ be declared __init.
+ *
+ * Copyright (c) 1999 Martin Mares <mj@ucw.cz>
+ *
+ * Init/reset quirks for USB host controllers should be in the
+ * USB quirks file, where their drivers can access reuse it.
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/acpi.h>
+#include <linux/kallsyms.h>
+#include <linux/dmi.h>
+#include <linux/pci-aspm.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/ktime.h>
+#include <linux/mm.h>
+#include <asm/dma.h> /* isa_dma_bridge_buggy */
+#include "pci.h"
+
+/*
+ * Decoding should be disabled for a PCI device during BAR sizing to avoid
+ * conflict. But doing so may cause problems on host bridge and perhaps other
+ * key system devices. For devices that need to have mmio decoding always-on,
+ * we need to set the dev->mmio_always_on bit.
+ */
+static void quirk_mmio_always_on(struct pci_dev *dev)
+{
+ dev->mmio_always_on = 1;
+}
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_BRIDGE_HOST, 8, quirk_mmio_always_on);
+
+/* The Mellanox Tavor device gives false positive parity errors
+ * Mark this device with a broken_parity_status, to allow
+ * PCI scanning code to "skip" this now blacklisted device.
+ */
+static void quirk_mellanox_tavor(struct pci_dev *dev)
+{
+ dev->broken_parity_status = 1; /* This device gives false positives */
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX, PCI_DEVICE_ID_MELLANOX_TAVOR, quirk_mellanox_tavor);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX, PCI_DEVICE_ID_MELLANOX_TAVOR_BRIDGE, quirk_mellanox_tavor);
+
+/* Deal with broken BIOSes that neglect to enable passive release,
+ which can cause problems in combination with the 82441FX/PPro MTRRs */
+static void quirk_passive_release(struct pci_dev *dev)
+{
+ struct pci_dev *d = NULL;
+ unsigned char dlc;
+
+ /* We have to make sure a particular bit is set in the PIIX3
+ ISA bridge, so we have to go out and find it. */
+ while ((d = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_0, d))) {
+ pci_read_config_byte(d, 0x82, &dlc);
+ if (!(dlc & 1<<1)) {
+ dev_info(&d->dev, "PIIX3: Enabling Passive Release\n");
+ dlc |= 1<<1;
+ pci_write_config_byte(d, 0x82, dlc);
+ }
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_passive_release);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_passive_release);
+
+/* The VIA VP2/VP3/MVP3 seem to have some 'features'. There may be a workaround
+ but VIA don't answer queries. If you happen to have good contacts at VIA
+ ask them for me please -- Alan
+
+ This appears to be BIOS not version dependent. So presumably there is a
+ chipset level fix */
+
+static void quirk_isa_dma_hangs(struct pci_dev *dev)
+{
+ if (!isa_dma_bridge_buggy) {
+ isa_dma_bridge_buggy = 1;
+ dev_info(&dev->dev, "Activating ISA DMA hang workarounds\n");
+ }
+}
+ /*
+ * Its not totally clear which chipsets are the problematic ones
+ * We know 82C586 and 82C596 variants are affected.
+ */
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_0, quirk_isa_dma_hangs);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C596, quirk_isa_dma_hangs);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_0, quirk_isa_dma_hangs);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, quirk_isa_dma_hangs);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_1, quirk_isa_dma_hangs);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_2, quirk_isa_dma_hangs);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_3, quirk_isa_dma_hangs);
+
+/*
+ * Intel NM10 "TigerPoint" LPC PM1a_STS.BM_STS must be clear
+ * for some HT machines to use C4 w/o hanging.
+ */
+static void quirk_tigerpoint_bm_sts(struct pci_dev *dev)
+{
+ u32 pmbase;
+ u16 pm1a;
+
+ pci_read_config_dword(dev, 0x40, &pmbase);
+ pmbase = pmbase & 0xff80;
+ pm1a = inw(pmbase);
+
+ if (pm1a & 0x10) {
+ dev_info(&dev->dev, FW_BUG "TigerPoint LPC.BM_STS cleared\n");
+ outw(0x10, pmbase);
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TGP_LPC, quirk_tigerpoint_bm_sts);
+
+/*
+ * Chipsets where PCI->PCI transfers vanish or hang
+ */
+static void quirk_nopcipci(struct pci_dev *dev)
+{
+ if ((pci_pci_problems & PCIPCI_FAIL) == 0) {
+ dev_info(&dev->dev, "Disabling direct PCI/PCI transfers\n");
+ pci_pci_problems |= PCIPCI_FAIL;
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5597, quirk_nopcipci);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_496, quirk_nopcipci);
+
+static void quirk_nopciamd(struct pci_dev *dev)
+{
+ u8 rev;
+ pci_read_config_byte(dev, 0x08, &rev);
+ if (rev == 0x13) {
+ /* Erratum 24 */
+ dev_info(&dev->dev, "Chipset erratum: Disabling direct PCI/AGP transfers\n");
+ pci_pci_problems |= PCIAGP_FAIL;
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8151_0, quirk_nopciamd);
+
+/*
+ * Triton requires workarounds to be used by the drivers
+ */
+static void quirk_triton(struct pci_dev *dev)
+{
+ if ((pci_pci_problems&PCIPCI_TRITON) == 0) {
+ dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n");
+ pci_pci_problems |= PCIPCI_TRITON;
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82437, quirk_triton);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82437VX, quirk_triton);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439, quirk_triton);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439TX, quirk_triton);
+
+/*
+ * VIA Apollo KT133 needs PCI latency patch
+ * Made according to a windows driver based patch by George E. Breese
+ * see PCI Latency Adjust on http://www.viahardware.com/download/viatweak.shtm
+ * and http://www.georgebreese.com/net/software/#PCI
+ * Also see http://www.au-ja.org/review-kt133a-1-en.phtml for
+ * the info on which Mr Breese based his work.
+ *
+ * Updated based on further information from the site and also on
+ * information provided by VIA
+ */
+static void quirk_vialatency(struct pci_dev *dev)
+{
+ struct pci_dev *p;
+ u8 busarb;
+ /* Ok we have a potential problem chipset here. Now see if we have
+ a buggy southbridge */
+
+ p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, NULL);
+ if (p != NULL) {
+ /* 0x40 - 0x4f == 686B, 0x10 - 0x2f == 686A; thanks Dan Hollis */
+ /* Check for buggy part revisions */
+ if (p->revision < 0x40 || p->revision > 0x42)
+ goto exit;
+ } else {
+ p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, NULL);
+ if (p == NULL) /* No problem parts */
+ goto exit;
+ /* Check for buggy part revisions */
+ if (p->revision < 0x10 || p->revision > 0x12)
+ goto exit;
+ }
+
+ /*
+ * Ok we have the problem. Now set the PCI master grant to
+ * occur every master grant. The apparent bug is that under high
+ * PCI load (quite common in Linux of course) you can get data
+ * loss when the CPU is held off the bus for 3 bus master requests
+ * This happens to include the IDE controllers....
+ *
+ * VIA only apply this fix when an SB Live! is present but under
+ * both Linux and Windows this isn't enough, and we have seen
+ * corruption without SB Live! but with things like 3 UDMA IDE
+ * controllers. So we ignore that bit of the VIA recommendation..
+ */
+
+ pci_read_config_byte(dev, 0x76, &busarb);
+ /* Set bit 4 and bi 5 of byte 76 to 0x01
+ "Master priority rotation on every PCI master grant */
+ busarb &= ~(1<<5);
+ busarb |= (1<<4);
+ pci_write_config_byte(dev, 0x76, busarb);
+ dev_info(&dev->dev, "Applying VIA southbridge workaround\n");
+exit:
+ pci_dev_put(p);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, quirk_vialatency);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8371_1, quirk_vialatency);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, quirk_vialatency);
+/* Must restore this on a resume from RAM */
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, quirk_vialatency);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8371_1, quirk_vialatency);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, quirk_vialatency);
+
+/*
+ * VIA Apollo VP3 needs ETBF on BT848/878
+ */
+static void quirk_viaetbf(struct pci_dev *dev)
+{
+ if ((pci_pci_problems&PCIPCI_VIAETBF) == 0) {
+ dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n");
+ pci_pci_problems |= PCIPCI_VIAETBF;
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C597_0, quirk_viaetbf);
+
+static void quirk_vsfx(struct pci_dev *dev)
+{
+ if ((pci_pci_problems&PCIPCI_VSFX) == 0) {
+ dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n");
+ pci_pci_problems |= PCIPCI_VSFX;
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C576, quirk_vsfx);
+
+/*
+ * Ali Magik requires workarounds to be used by the drivers
+ * that DMA to AGP space. Latency must be set to 0xA and triton
+ * workaround applied too
+ * [Info kindly provided by ALi]
+ */
+static void quirk_alimagik(struct pci_dev *dev)
+{
+ if ((pci_pci_problems&PCIPCI_ALIMAGIK) == 0) {
+ dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n");
+ pci_pci_problems |= PCIPCI_ALIMAGIK|PCIPCI_TRITON;
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1647, quirk_alimagik);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1651, quirk_alimagik);
+
+/*
+ * Natoma has some interesting boundary conditions with Zoran stuff
+ * at least
+ */
+static void quirk_natoma(struct pci_dev *dev)
+{
+ if ((pci_pci_problems&PCIPCI_NATOMA) == 0) {
+ dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n");
+ pci_pci_problems |= PCIPCI_NATOMA;
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_natoma);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443LX_0, quirk_natoma);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443LX_1, quirk_natoma);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_0, quirk_natoma);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_1, quirk_natoma);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_2, quirk_natoma);
+
+/*
+ * This chip can cause PCI parity errors if config register 0xA0 is read
+ * while DMAs are occurring.
+ */
+static void quirk_citrine(struct pci_dev *dev)
+{
+ dev->cfg_size = 0xA0;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE, quirk_citrine);
+
+/* On IBM Crocodile ipr SAS adapters, expand BAR to system page size */
+static void quirk_extend_bar_to_page(struct pci_dev *dev)
+{
+ int i;
+
+ for (i = 0; i < PCI_STD_RESOURCE_END; i++) {
+ struct resource *r = &dev->resource[i];
+
+ if (r->flags & IORESOURCE_MEM && resource_size(r) < PAGE_SIZE) {
+ r->end = PAGE_SIZE - 1;
+ r->start = 0;
+ r->flags |= IORESOURCE_UNSET;
+ dev_info(&dev->dev, "expanded BAR %d to page size: %pR\n",
+ i, r);
+ }
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM, 0x034a, quirk_extend_bar_to_page);
+
+/*
+ * S3 868 and 968 chips report region size equal to 32M, but they decode 64M.
+ * If it's needed, re-allocate the region.
+ */
+static void quirk_s3_64M(struct pci_dev *dev)
+{
+ struct resource *r = &dev->resource[0];
+
+ if ((r->start & 0x3ffffff) || r->end != r->start + 0x3ffffff) {
+ r->flags |= IORESOURCE_UNSET;
+ r->start = 0;
+ r->end = 0x3ffffff;
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_868, quirk_s3_64M);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_968, quirk_s3_64M);
+
+static void quirk_io(struct pci_dev *dev, int pos, unsigned size,
+ const char *name)
+{
+ u32 region;
+ struct pci_bus_region bus_region;
+ struct resource *res = dev->resource + pos;
+
+ pci_read_config_dword(dev, PCI_BASE_ADDRESS_0 + (pos << 2), &region);
+
+ if (!region)
+ return;
+
+ res->name = pci_name(dev);
+ res->flags = region & ~PCI_BASE_ADDRESS_IO_MASK;
+ res->flags |=
+ (IORESOURCE_IO | IORESOURCE_PCI_FIXED | IORESOURCE_SIZEALIGN);
+ region &= ~(size - 1);
+
+ /* Convert from PCI bus to resource space */
+ bus_region.start = region;
+ bus_region.end = region + size - 1;
+ pcibios_bus_to_resource(dev->bus, res, &bus_region);
+
+ dev_info(&dev->dev, FW_BUG "%s quirk: reg 0x%x: %pR\n",
+ name, PCI_BASE_ADDRESS_0 + (pos << 2), res);
+}
+
+/*
+ * Some CS5536 BIOSes (for example, the Soekris NET5501 board w/ comBIOS
+ * ver. 1.33 20070103) don't set the correct ISA PCI region header info.
+ * BAR0 should be 8 bytes; instead, it may be set to something like 8k
+ * (which conflicts w/ BAR1's memory range).
+ *
+ * CS553x's ISA PCI BARs may also be read-only (ref:
+ * https://bugzilla.kernel.org/show_bug.cgi?id=85991 - Comment #4 forward).
+ */
+static void quirk_cs5536_vsa(struct pci_dev *dev)
+{
+ static char *name = "CS5536 ISA bridge";
+
+ if (pci_resource_len(dev, 0) != 8) {
+ quirk_io(dev, 0, 8, name); /* SMB */
+ quirk_io(dev, 1, 256, name); /* GPIO */
+ quirk_io(dev, 2, 64, name); /* MFGPT */
+ dev_info(&dev->dev, "%s bug detected (incorrect header); workaround applied\n",
+ name);
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, quirk_cs5536_vsa);
+
+static void quirk_io_region(struct pci_dev *dev, int port,
+ unsigned size, int nr, const char *name)
+{
+ u16 region;
+ struct pci_bus_region bus_region;
+ struct resource *res = dev->resource + nr;
+
+ pci_read_config_word(dev, port, &region);
+ region &= ~(size - 1);
+
+ if (!region)
+ return;
+
+ res->name = pci_name(dev);
+ res->flags = IORESOURCE_IO;
+
+ /* Convert from PCI bus to resource space */
+ bus_region.start = region;
+ bus_region.end = region + size - 1;
+ pcibios_bus_to_resource(dev->bus, res, &bus_region);
+
+ if (!pci_claim_resource(dev, nr))
+ dev_info(&dev->dev, "quirk: %pR claimed by %s\n", res, name);
+}
+
+/*
+ * ATI Northbridge setups MCE the processor if you even
+ * read somewhere between 0x3b0->0x3bb or read 0x3d3
+ */
+static void quirk_ati_exploding_mce(struct pci_dev *dev)
+{
+ dev_info(&dev->dev, "ATI Northbridge, reserving I/O ports 0x3b0 to 0x3bb\n");
+ /* Mae rhaid i ni beidio ag edrych ar y lleoliadiau I/O hyn */
+ request_region(0x3b0, 0x0C, "RadeonIGP");
+ request_region(0x3d3, 0x01, "RadeonIGP");
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS100, quirk_ati_exploding_mce);
+
+/*
+ * In the AMD NL platform, this device ([1022:7912]) has a class code of
+ * PCI_CLASS_SERIAL_USB_XHCI (0x0c0330), which means the xhci driver will
+ * claim it.
+ * But the dwc3 driver is a more specific driver for this device, and we'd
+ * prefer to use it instead of xhci. To prevent xhci from claiming the
+ * device, change the class code to 0x0c03fe, which the PCI r3.0 spec
+ * defines as "USB device (not host controller)". The dwc3 driver can then
+ * claim it based on its Vendor and Device ID.
+ */
+static void quirk_amd_nl_class(struct pci_dev *pdev)
+{
+ /*
+ * Use 'USB Device' (0x0c03fe) instead of PCI header provided
+ */
+ pdev->class = 0x0c03fe;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB,
+ quirk_amd_nl_class);
+
+/*
+ * Let's make the southbridge information explicit instead
+ * of having to worry about people probing the ACPI areas,
+ * for example.. (Yes, it happens, and if you read the wrong
+ * ACPI register it will put the machine to sleep with no
+ * way of waking it up again. Bummer).
+ *
+ * ALI M7101: Two IO regions pointed to by words at
+ * 0xE0 (64 bytes of ACPI registers)
+ * 0xE2 (32 bytes of SMB registers)
+ */
+static void quirk_ali7101_acpi(struct pci_dev *dev)
+{
+ quirk_io_region(dev, 0xE0, 64, PCI_BRIDGE_RESOURCES, "ali7101 ACPI");
+ quirk_io_region(dev, 0xE2, 32, PCI_BRIDGE_RESOURCES+1, "ali7101 SMB");
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101, quirk_ali7101_acpi);
+
+static void piix4_io_quirk(struct pci_dev *dev, const char *name, unsigned int port, unsigned int enable)
+{
+ u32 devres;
+ u32 mask, size, base;
+
+ pci_read_config_dword(dev, port, &devres);
+ if ((devres & enable) != enable)
+ return;
+ mask = (devres >> 16) & 15;
+ base = devres & 0xffff;
+ size = 16;
+ for (;;) {
+ unsigned bit = size >> 1;
+ if ((bit & mask) == bit)
+ break;
+ size = bit;
+ }
+ /*
+ * For now we only print it out. Eventually we'll want to
+ * reserve it (at least if it's in the 0x1000+ range), but
+ * let's get enough confirmation reports first.
+ */
+ base &= -size;
+ dev_info(&dev->dev, "%s PIO at %04x-%04x\n", name, base,
+ base + size - 1);
+}
+
+static void piix4_mem_quirk(struct pci_dev *dev, const char *name, unsigned int port, unsigned int enable)
+{
+ u32 devres;
+ u32 mask, size, base;
+
+ pci_read_config_dword(dev, port, &devres);
+ if ((devres & enable) != enable)
+ return;
+ base = devres & 0xffff0000;
+ mask = (devres & 0x3f) << 16;
+ size = 128 << 16;
+ for (;;) {
+ unsigned bit = size >> 1;
+ if ((bit & mask) == bit)
+ break;
+ size = bit;
+ }
+ /*
+ * For now we only print it out. Eventually we'll want to
+ * reserve it, but let's get enough confirmation reports first.
+ */
+ base &= -size;
+ dev_info(&dev->dev, "%s MMIO at %04x-%04x\n", name, base,
+ base + size - 1);
+}
+
+/*
+ * PIIX4 ACPI: Two IO regions pointed to by longwords at
+ * 0x40 (64 bytes of ACPI registers)
+ * 0x90 (16 bytes of SMB registers)
+ * and a few strange programmable PIIX4 device resources.
+ */
+static void quirk_piix4_acpi(struct pci_dev *dev)
+{
+ u32 res_a;
+
+ quirk_io_region(dev, 0x40, 64, PCI_BRIDGE_RESOURCES, "PIIX4 ACPI");
+ quirk_io_region(dev, 0x90, 16, PCI_BRIDGE_RESOURCES+1, "PIIX4 SMB");
+
+ /* Device resource A has enables for some of the other ones */
+ pci_read_config_dword(dev, 0x5c, &res_a);
+
+ piix4_io_quirk(dev, "PIIX4 devres B", 0x60, 3 << 21);
+ piix4_io_quirk(dev, "PIIX4 devres C", 0x64, 3 << 21);
+
+ /* Device resource D is just bitfields for static resources */
+
+ /* Device 12 enabled? */
+ if (res_a & (1 << 29)) {
+ piix4_io_quirk(dev, "PIIX4 devres E", 0x68, 1 << 20);
+ piix4_mem_quirk(dev, "PIIX4 devres F", 0x6c, 1 << 7);
+ }
+ /* Device 13 enabled? */
+ if (res_a & (1 << 30)) {
+ piix4_io_quirk(dev, "PIIX4 devres G", 0x70, 1 << 20);
+ piix4_mem_quirk(dev, "PIIX4 devres H", 0x74, 1 << 7);
+ }
+ piix4_io_quirk(dev, "PIIX4 devres I", 0x78, 1 << 20);
+ piix4_io_quirk(dev, "PIIX4 devres J", 0x7c, 1 << 20);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, quirk_piix4_acpi);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_3, quirk_piix4_acpi);
+
+#define ICH_PMBASE 0x40
+#define ICH_ACPI_CNTL 0x44
+#define ICH4_ACPI_EN 0x10
+#define ICH6_ACPI_EN 0x80
+#define ICH4_GPIOBASE 0x58
+#define ICH4_GPIO_CNTL 0x5c
+#define ICH4_GPIO_EN 0x10
+#define ICH6_GPIOBASE 0x48
+#define ICH6_GPIO_CNTL 0x4c
+#define ICH6_GPIO_EN 0x10
+
+/*
+ * ICH4, ICH4-M, ICH5, ICH5-M ACPI: Three IO regions pointed to by longwords at
+ * 0x40 (128 bytes of ACPI, GPIO & TCO registers)
+ * 0x58 (64 bytes of GPIO I/O space)
+ */
+static void quirk_ich4_lpc_acpi(struct pci_dev *dev)
+{
+ u8 enable;
+
+ /*
+ * The check for PCIBIOS_MIN_IO is to ensure we won't create a conflict
+ * with low legacy (and fixed) ports. We don't know the decoding
+ * priority and can't tell whether the legacy device or the one created
+ * here is really at that address. This happens on boards with broken
+ * BIOSes.
+ */
+
+ pci_read_config_byte(dev, ICH_ACPI_CNTL, &enable);
+ if (enable & ICH4_ACPI_EN)
+ quirk_io_region(dev, ICH_PMBASE, 128, PCI_BRIDGE_RESOURCES,
+ "ICH4 ACPI/GPIO/TCO");
+
+ pci_read_config_byte(dev, ICH4_GPIO_CNTL, &enable);
+ if (enable & ICH4_GPIO_EN)
+ quirk_io_region(dev, ICH4_GPIOBASE, 64, PCI_BRIDGE_RESOURCES+1,
+ "ICH4 GPIO");
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, quirk_ich4_lpc_acpi);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_0, quirk_ich4_lpc_acpi);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, quirk_ich4_lpc_acpi);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_10, quirk_ich4_lpc_acpi);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, quirk_ich4_lpc_acpi);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, quirk_ich4_lpc_acpi);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, quirk_ich4_lpc_acpi);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, quirk_ich4_lpc_acpi);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, quirk_ich4_lpc_acpi);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1, quirk_ich4_lpc_acpi);
+
+static void ich6_lpc_acpi_gpio(struct pci_dev *dev)
+{
+ u8 enable;
+
+ pci_read_config_byte(dev, ICH_ACPI_CNTL, &enable);
+ if (enable & ICH6_ACPI_EN)
+ quirk_io_region(dev, ICH_PMBASE, 128, PCI_BRIDGE_RESOURCES,
+ "ICH6 ACPI/GPIO/TCO");
+
+ pci_read_config_byte(dev, ICH6_GPIO_CNTL, &enable);
+ if (enable & ICH6_GPIO_EN)
+ quirk_io_region(dev, ICH6_GPIOBASE, 64, PCI_BRIDGE_RESOURCES+1,
+ "ICH6 GPIO");
+}
+
+static void ich6_lpc_generic_decode(struct pci_dev *dev, unsigned reg, const char *name, int dynsize)
+{
+ u32 val;
+ u32 size, base;
+
+ pci_read_config_dword(dev, reg, &val);
+
+ /* Enabled? */
+ if (!(val & 1))
+ return;
+ base = val & 0xfffc;
+ if (dynsize) {
+ /*
+ * This is not correct. It is 16, 32 or 64 bytes depending on
+ * register D31:F0:ADh bits 5:4.
+ *
+ * But this gets us at least _part_ of it.
+ */
+ size = 16;
+ } else {
+ size = 128;
+ }
+ base &= ~(size-1);
+
+ /* Just print it out for now. We should reserve it after more debugging */
+ dev_info(&dev->dev, "%s PIO at %04x-%04x\n", name, base, base+size-1);
+}
+
+static void quirk_ich6_lpc(struct pci_dev *dev)
+{
+ /* Shared ACPI/GPIO decode with all ICH6+ */
+ ich6_lpc_acpi_gpio(dev);
+
+ /* ICH6-specific generic IO decode */
+ ich6_lpc_generic_decode(dev, 0x84, "LPC Generic IO decode 1", 0);
+ ich6_lpc_generic_decode(dev, 0x88, "LPC Generic IO decode 2", 1);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0, quirk_ich6_lpc);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, quirk_ich6_lpc);
+
+static void ich7_lpc_generic_decode(struct pci_dev *dev, unsigned reg, const char *name)
+{
+ u32 val;
+ u32 mask, base;
+
+ pci_read_config_dword(dev, reg, &val);
+
+ /* Enabled? */
+ if (!(val & 1))
+ return;
+
+ /*
+ * IO base in bits 15:2, mask in bits 23:18, both
+ * are dword-based
+ */
+ base = val & 0xfffc;
+ mask = (val >> 16) & 0xfc;
+ mask |= 3;
+
+ /* Just print it out for now. We should reserve it after more debugging */
+ dev_info(&dev->dev, "%s PIO at %04x (mask %04x)\n", name, base, mask);
+}
+
+/* ICH7-10 has the same common LPC generic IO decode registers */
+static void quirk_ich7_lpc(struct pci_dev *dev)
+{
+ /* We share the common ACPI/GPIO decode with ICH6 */
+ ich6_lpc_acpi_gpio(dev);
+
+ /* And have 4 ICH7+ generic decodes */
+ ich7_lpc_generic_decode(dev, 0x84, "ICH7 LPC Generic IO decode 1");
+ ich7_lpc_generic_decode(dev, 0x88, "ICH7 LPC Generic IO decode 2");
+ ich7_lpc_generic_decode(dev, 0x8c, "ICH7 LPC Generic IO decode 3");
+ ich7_lpc_generic_decode(dev, 0x90, "ICH7 LPC Generic IO decode 4");
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0, quirk_ich7_lpc);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1, quirk_ich7_lpc);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_31, quirk_ich7_lpc);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_0, quirk_ich7_lpc);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_2, quirk_ich7_lpc);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_3, quirk_ich7_lpc);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_1, quirk_ich7_lpc);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_4, quirk_ich7_lpc);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_2, quirk_ich7_lpc);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_4, quirk_ich7_lpc);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_7, quirk_ich7_lpc);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_8, quirk_ich7_lpc);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_1, quirk_ich7_lpc);
+
+/*
+ * VIA ACPI: One IO region pointed to by longword at
+ * 0x48 or 0x20 (256 bytes of ACPI registers)
+ */
+static void quirk_vt82c586_acpi(struct pci_dev *dev)
+{
+ if (dev->revision & 0x10)
+ quirk_io_region(dev, 0x48, 256, PCI_BRIDGE_RESOURCES,
+ "vt82c586 ACPI");
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_vt82c586_acpi);
+
+/*
+ * VIA VT82C686 ACPI: Three IO region pointed to by (long)words at
+ * 0x48 (256 bytes of ACPI registers)
+ * 0x70 (128 bytes of hardware monitoring register)
+ * 0x90 (16 bytes of SMB registers)
+ */
+static void quirk_vt82c686_acpi(struct pci_dev *dev)
+{
+ quirk_vt82c586_acpi(dev);
+
+ quirk_io_region(dev, 0x70, 128, PCI_BRIDGE_RESOURCES+1,
+ "vt82c686 HW-mon");
+
+ quirk_io_region(dev, 0x90, 16, PCI_BRIDGE_RESOURCES+2, "vt82c686 SMB");
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_vt82c686_acpi);
+
+/*
+ * VIA VT8235 ISA Bridge: Two IO regions pointed to by words at
+ * 0x88 (128 bytes of power management registers)
+ * 0xd0 (16 bytes of SMB registers)
+ */
+static void quirk_vt8235_acpi(struct pci_dev *dev)
+{
+ quirk_io_region(dev, 0x88, 128, PCI_BRIDGE_RESOURCES, "vt8235 PM");
+ quirk_io_region(dev, 0xd0, 16, PCI_BRIDGE_RESOURCES+1, "vt8235 SMB");
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_vt8235_acpi);
+
+/*
+ * TI XIO2000a PCIe-PCI Bridge erroneously reports it supports fast back-to-back:
+ * Disable fast back-to-back on the secondary bus segment
+ */
+static void quirk_xio2000a(struct pci_dev *dev)
+{
+ struct pci_dev *pdev;
+ u16 command;
+
+ dev_warn(&dev->dev, "TI XIO2000a quirk detected; secondary bus fast back-to-back transfers disabled\n");
+ list_for_each_entry(pdev, &dev->subordinate->devices, bus_list) {
+ pci_read_config_word(pdev, PCI_COMMAND, &command);
+ if (command & PCI_COMMAND_FAST_BACK)
+ pci_write_config_word(pdev, PCI_COMMAND, command & ~PCI_COMMAND_FAST_BACK);
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_XIO2000A,
+ quirk_xio2000a);
+
+#ifdef CONFIG_X86_IO_APIC
+
+#include <asm/io_apic.h>
+
+/*
+ * VIA 686A/B: If an IO-APIC is active, we need to route all on-chip
+ * devices to the external APIC.
+ *
+ * TODO: When we have device-specific interrupt routers,
+ * this code will go away from quirks.
+ */
+static void quirk_via_ioapic(struct pci_dev *dev)
+{
+ u8 tmp;
+
+ if (nr_ioapics < 1)
+ tmp = 0; /* nothing routed to external APIC */
+ else
+ tmp = 0x1f; /* all known bits (4-0) routed to external APIC */
+
+ dev_info(&dev->dev, "%sbling VIA external APIC routing\n",
+ tmp == 0 ? "Disa" : "Ena");
+
+ /* Offset 0x58: External APIC IRQ output control */
+ pci_write_config_byte(dev, 0x58, tmp);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_ioapic);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_ioapic);
+
+/*
+ * VIA 8237: Some BIOSes don't set the 'Bypass APIC De-Assert Message' Bit.
+ * This leads to doubled level interrupt rates.
+ * Set this bit to get rid of cycle wastage.
+ * Otherwise uncritical.
+ */
+static void quirk_via_vt8237_bypass_apic_deassert(struct pci_dev *dev)
+{
+ u8 misc_control2;
+#define BYPASS_APIC_DEASSERT 8
+
+ pci_read_config_byte(dev, 0x5B, &misc_control2);
+ if (!(misc_control2 & BYPASS_APIC_DEASSERT)) {
+ dev_info(&dev->dev, "Bypassing VIA 8237 APIC De-Assert Message\n");
+ pci_write_config_byte(dev, 0x5B, misc_control2|BYPASS_APIC_DEASSERT);
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_vt8237_bypass_apic_deassert);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_vt8237_bypass_apic_deassert);
+
+/*
+ * The AMD io apic can hang the box when an apic irq is masked.
+ * We check all revs >= B0 (yet not in the pre production!) as the bug
+ * is currently marked NoFix
+ *
+ * We have multiple reports of hangs with this chipset that went away with
+ * noapic specified. For the moment we assume it's the erratum. We may be wrong
+ * of course. However the advice is demonstrably good even if so..
+ */
+static void quirk_amd_ioapic(struct pci_dev *dev)
+{
+ if (dev->revision >= 0x02) {
+ dev_warn(&dev->dev, "I/O APIC: AMD Erratum #22 may be present. In the event of instability try\n");
+ dev_warn(&dev->dev, " : booting with the \"noapic\" option\n");
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7410, quirk_amd_ioapic);
+
+static void quirk_ioapic_rmw(struct pci_dev *dev)
+{
+ if (dev->devfn == 0 && dev->bus->number == 0)
+ sis_apic_bug = 1;
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_ANY_ID, quirk_ioapic_rmw);
+#endif /* CONFIG_X86_IO_APIC */
+
+/*
+ * Some settings of MMRBC can lead to data corruption so block changes.
+ * See AMD 8131 HyperTransport PCI-X Tunnel Revision Guide
+ */
+static void quirk_amd_8131_mmrbc(struct pci_dev *dev)
+{
+ if (dev->subordinate && dev->revision <= 0x12) {
+ dev_info(&dev->dev, "AMD8131 rev %x detected; disabling PCI-X MMRBC\n",
+ dev->revision);
+ dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MMRBC;
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_amd_8131_mmrbc);
+
+/*
+ * FIXME: it is questionable that quirk_via_acpi
+ * is needed. It shows up as an ISA bridge, and does not
+ * support the PCI_INTERRUPT_LINE register at all. Therefore
+ * it seems like setting the pci_dev's 'irq' to the
+ * value of the ACPI SCI interrupt is only done for convenience.
+ * -jgarzik
+ */
+static void quirk_via_acpi(struct pci_dev *d)
+{
+ /*
+ * VIA ACPI device: SCI IRQ line in PCI config byte 0x42
+ */
+ u8 irq;
+ pci_read_config_byte(d, 0x42, &irq);
+ irq &= 0xf;
+ if (irq && (irq != 2))
+ d->irq = irq;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_via_acpi);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_via_acpi);
+
+
+/*
+ * VIA bridges which have VLink
+ */
+
+static int via_vlink_dev_lo = -1, via_vlink_dev_hi = 18;
+
+static void quirk_via_bridge(struct pci_dev *dev)
+{
+ /* See what bridge we have and find the device ranges */
+ switch (dev->device) {
+ case PCI_DEVICE_ID_VIA_82C686:
+ /* The VT82C686 is special, it attaches to PCI and can have
+ any device number. All its subdevices are functions of
+ that single device. */
+ via_vlink_dev_lo = PCI_SLOT(dev->devfn);
+ via_vlink_dev_hi = PCI_SLOT(dev->devfn);
+ break;
+ case PCI_DEVICE_ID_VIA_8237:
+ case PCI_DEVICE_ID_VIA_8237A:
+ via_vlink_dev_lo = 15;
+ break;
+ case PCI_DEVICE_ID_VIA_8235:
+ via_vlink_dev_lo = 16;
+ break;
+ case PCI_DEVICE_ID_VIA_8231:
+ case PCI_DEVICE_ID_VIA_8233_0:
+ case PCI_DEVICE_ID_VIA_8233A:
+ case PCI_DEVICE_ID_VIA_8233C_0:
+ via_vlink_dev_lo = 17;
+ break;
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_bridge);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, quirk_via_bridge);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233_0, quirk_via_bridge);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233A, quirk_via_bridge);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233C_0, quirk_via_bridge);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_via_bridge);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_bridge);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237A, quirk_via_bridge);
+
+/**
+ * quirk_via_vlink - VIA VLink IRQ number update
+ * @dev: PCI device
+ *
+ * If the device we are dealing with is on a PIC IRQ we need to
+ * ensure that the IRQ line register which usually is not relevant
+ * for PCI cards, is actually written so that interrupts get sent
+ * to the right place.
+ * We only do this on systems where a VIA south bridge was detected,
+ * and only for VIA devices on the motherboard (see quirk_via_bridge
+ * above).
+ */
+
+static void quirk_via_vlink(struct pci_dev *dev)
+{
+ u8 irq, new_irq;
+
+ /* Check if we have VLink at all */
+ if (via_vlink_dev_lo == -1)
+ return;
+
+ new_irq = dev->irq;
+
+ /* Don't quirk interrupts outside the legacy IRQ range */
+ if (!new_irq || new_irq > 15)
+ return;
+
+ /* Internal device ? */
+ if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) > via_vlink_dev_hi ||
+ PCI_SLOT(dev->devfn) < via_vlink_dev_lo)
+ return;
+
+ /* This is an internal VLink device on a PIC interrupt. The BIOS
+ ought to have set this but may not have, so we redo it */
+
+ pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
+ if (new_irq != irq) {
+ dev_info(&dev->dev, "VIA VLink IRQ fixup, from %d to %d\n",
+ irq, new_irq);
+ udelay(15); /* unknown if delay really needed */
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq);
+ }
+}
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_vlink);
+
+/*
+ * VIA VT82C598 has its device ID settable and many BIOSes
+ * set it to the ID of VT82C597 for backward compatibility.
+ * We need to switch it off to be able to recognize the real
+ * type of the chip.
+ */
+static void quirk_vt82c598_id(struct pci_dev *dev)
+{
+ pci_write_config_byte(dev, 0xfc, 0);
+ pci_read_config_word(dev, PCI_DEVICE_ID, &dev->device);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C597_0, quirk_vt82c598_id);
+
+/*
+ * CardBus controllers have a legacy base address that enables them
+ * to respond as i82365 pcmcia controllers. We don't want them to
+ * do this even if the Linux CardBus driver is not loaded, because
+ * the Linux i82365 driver does not (and should not) handle CardBus.
+ */
+static void quirk_cardbus_legacy(struct pci_dev *dev)
+{
+ pci_write_config_dword(dev, PCI_CB_LEGACY_MODE_BASE, 0);
+}
+DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_BRIDGE_CARDBUS, 8, quirk_cardbus_legacy);
+DECLARE_PCI_FIXUP_CLASS_RESUME_EARLY(PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_BRIDGE_CARDBUS, 8, quirk_cardbus_legacy);
+
+/*
+ * Following the PCI ordering rules is optional on the AMD762. I'm not
+ * sure what the designers were smoking but let's not inhale...
+ *
+ * To be fair to AMD, it follows the spec by default, its BIOS people
+ * who turn it off!
+ */
+static void quirk_amd_ordering(struct pci_dev *dev)
+{
+ u32 pcic;
+ pci_read_config_dword(dev, 0x4C, &pcic);
+ if ((pcic & 6) != 6) {
+ pcic |= 6;
+ dev_warn(&dev->dev, "BIOS failed to enable PCI standards compliance; fixing this error\n");
+ pci_write_config_dword(dev, 0x4C, pcic);
+ pci_read_config_dword(dev, 0x84, &pcic);
+ pcic |= (1 << 23); /* Required in this mode */
+ pci_write_config_dword(dev, 0x84, pcic);
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C, quirk_amd_ordering);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C, quirk_amd_ordering);
+
+/*
+ * DreamWorks provided workaround for Dunord I-3000 problem
+ *
+ * This card decodes and responds to addresses not apparently
+ * assigned to it. We force a larger allocation to ensure that
+ * nothing gets put too close to it.
+ */
+static void quirk_dunord(struct pci_dev *dev)
+{
+ struct resource *r = &dev->resource[1];
+
+ r->flags |= IORESOURCE_UNSET;
+ r->start = 0;
+ r->end = 0xffffff;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_DUNORD, PCI_DEVICE_ID_DUNORD_I3000, quirk_dunord);
+
+/*
+ * i82380FB mobile docking controller: its PCI-to-PCI bridge
+ * is subtractive decoding (transparent), and does indicate this
+ * in the ProgIf. Unfortunately, the ProgIf value is wrong - 0x80
+ * instead of 0x01.
+ */
+static void quirk_transparent_bridge(struct pci_dev *dev)
+{
+ dev->transparent = 1;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82380FB, quirk_transparent_bridge);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA, 0x605, quirk_transparent_bridge);
+
+/*
+ * Common misconfiguration of the MediaGX/Geode PCI master that will
+ * reduce PCI bandwidth from 70MB/s to 25MB/s. See the GXM/GXLV/GX1
+ * datasheets found at http://www.national.com/analog for info on what
+ * these bits do. <christer@weinigel.se>
+ */
+static void quirk_mediagx_master(struct pci_dev *dev)
+{
+ u8 reg;
+
+ pci_read_config_byte(dev, 0x41, &reg);
+ if (reg & 2) {
+ reg &= ~2;
+ dev_info(&dev->dev, "Fixup for MediaGX/Geode Slave Disconnect Boundary (0x41=0x%02x)\n",
+ reg);
+ pci_write_config_byte(dev, 0x41, reg);
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_PCI_MASTER, quirk_mediagx_master);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_PCI_MASTER, quirk_mediagx_master);
+
+/*
+ * Ensure C0 rev restreaming is off. This is normally done by
+ * the BIOS but in the odd case it is not the results are corruption
+ * hence the presence of a Linux check
+ */
+static void quirk_disable_pxb(struct pci_dev *pdev)
+{
+ u16 config;
+
+ if (pdev->revision != 0x04) /* Only C0 requires this */
+ return;
+ pci_read_config_word(pdev, 0x40, &config);
+ if (config & (1<<6)) {
+ config &= ~(1<<6);
+ pci_write_config_word(pdev, 0x40, config);
+ dev_info(&pdev->dev, "C0 revision 450NX. Disabling PCI restreaming\n");
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb);
+
+static void quirk_amd_ide_mode(struct pci_dev *pdev)
+{
+ /* set SBX00/Hudson-2 SATA in IDE mode to AHCI mode */
+ u8 tmp;
+
+ pci_read_config_byte(pdev, PCI_CLASS_DEVICE, &tmp);
+ if (tmp == 0x01) {
+ pci_read_config_byte(pdev, 0x40, &tmp);
+ pci_write_config_byte(pdev, 0x40, tmp|1);
+ pci_write_config_byte(pdev, 0x9, 1);
+ pci_write_config_byte(pdev, 0xa, 6);
+ pci_write_config_byte(pdev, 0x40, tmp);
+
+ pdev->class = PCI_CLASS_STORAGE_SATA_AHCI;
+ dev_info(&pdev->dev, "set SATA to AHCI mode\n");
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_amd_ide_mode);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_amd_ide_mode);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE, quirk_amd_ide_mode);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE, quirk_amd_ide_mode);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x7900, quirk_amd_ide_mode);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, 0x7900, quirk_amd_ide_mode);
+
+/*
+ * Serverworks CSB5 IDE does not fully support native mode
+ */
+static void quirk_svwks_csb5ide(struct pci_dev *pdev)
+{
+ u8 prog;
+ pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog);
+ if (prog & 5) {
+ prog &= ~5;
+ pdev->class &= ~5;
+ pci_write_config_byte(pdev, PCI_CLASS_PROG, prog);
+ /* PCI layer will sort out resources */
+ }
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, quirk_svwks_csb5ide);
+
+/*
+ * Intel 82801CAM ICH3-M datasheet says IDE modes must be the same
+ */
+static void quirk_ide_samemode(struct pci_dev *pdev)
+{
+ u8 prog;
+
+ pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog);
+
+ if (((prog & 1) && !(prog & 4)) || ((prog & 4) && !(prog & 1))) {
+ dev_info(&pdev->dev, "IDE mode mismatch; forcing legacy mode\n");
+ prog &= ~5;
+ pdev->class &= ~5;
+ pci_write_config_byte(pdev, PCI_CLASS_PROG, prog);
+ }
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_10, quirk_ide_samemode);
+
+/*
+ * Some ATA devices break if put into D3
+ */
+
+static void quirk_no_ata_d3(struct pci_dev *pdev)
+{
+ pdev->dev_flags |= PCI_DEV_FLAGS_NO_D3;
+}
+/* Quirk the legacy ATA devices only. The AHCI ones are ok */
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_ANY_ID,
+ PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3);
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_ATI, PCI_ANY_ID,
+ PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3);
+/* ALi loses some register settings that we cannot then restore */
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_AL, PCI_ANY_ID,
+ PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3);
+/* VIA comes back fine but we need to keep it alive or ACPI GTM failures
+ occur when mode detecting */
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_VIA, PCI_ANY_ID,
+ PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3);
+
+/* This was originally an Alpha specific thing, but it really fits here.
+ * The i82375 PCI/EISA bridge appears as non-classified. Fix that.
+ */
+static void quirk_eisa_bridge(struct pci_dev *dev)
+{
+ dev->class = PCI_CLASS_BRIDGE_EISA << 8;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82375, quirk_eisa_bridge);
+
+
+/*
+ * On ASUS P4B boards, the SMBus PCI Device within the ICH2/4 southbridge
+ * is not activated. The myth is that Asus said that they do not want the
+ * users to be irritated by just another PCI Device in the Win98 device
+ * manager. (see the file prog/hotplug/README.p4b in the lm_sensors
+ * package 2.7.0 for details)
+ *
+ * The SMBus PCI Device can be activated by setting a bit in the ICH LPC
+ * bridge. Unfortunately, this device has no subvendor/subdevice ID. So it
+ * becomes necessary to do this tweak in two steps -- the chosen trigger
+ * is either the Host bridge (preferred) or on-board VGA controller.
+ *
+ * Note that we used to unhide the SMBus that way on Toshiba laptops
+ * (Satellite A40 and Tecra M2) but then found that the thermal management
+ * was done by SMM code, which could cause unsynchronized concurrent
+ * accesses to the SMBus registers, with potentially bad effects. Thus you
+ * should be very careful when adding new entries: if SMM is accessing the
+ * Intel SMBus, this is a very good reason to leave it hidden.
+ *
+ * Likewise, many recent laptops use ACPI for thermal management. If the
+ * ACPI DSDT code accesses the SMBus, then Linux should not access it
+ * natively, and keeping the SMBus hidden is the right thing to do. If you
+ * are about to add an entry in the table below, please first disassemble
+ * the DSDT and double-check that there is no code accessing the SMBus.
+ */
+static int asus_hides_smbus;
+
+static void asus_hides_smbus_hostbridge(struct pci_dev *dev)
+{
+ if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK)) {
+ if (dev->device == PCI_DEVICE_ID_INTEL_82845_HB)
+ switch (dev->subsystem_device) {
+ case 0x8025: /* P4B-LX */
+ case 0x8070: /* P4B */
+ case 0x8088: /* P4B533 */
+ case 0x1626: /* L3C notebook */
+ asus_hides_smbus = 1;
+ }
+ else if (dev->device == PCI_DEVICE_ID_INTEL_82845G_HB)
+ switch (dev->subsystem_device) {
+ case 0x80b1: /* P4GE-V */
+ case 0x80b2: /* P4PE */
+ case 0x8093: /* P4B533-V */
+ asus_hides_smbus = 1;
+ }
+ else if (dev->device == PCI_DEVICE_ID_INTEL_82850_HB)
+ switch (dev->subsystem_device) {
+ case 0x8030: /* P4T533 */
+ asus_hides_smbus = 1;
+ }
+ else if (dev->device == PCI_DEVICE_ID_INTEL_7205_0)
+ switch (dev->subsystem_device) {
+ case 0x8070: /* P4G8X Deluxe */
+ asus_hides_smbus = 1;
+ }
+ else if (dev->device == PCI_DEVICE_ID_INTEL_E7501_MCH)
+ switch (dev->subsystem_device) {
+ case 0x80c9: /* PU-DLS */
+ asus_hides_smbus = 1;
+ }
+ else if (dev->device == PCI_DEVICE_ID_INTEL_82855GM_HB)
+ switch (dev->subsystem_device) {
+ case 0x1751: /* M2N notebook */
+ case 0x1821: /* M5N notebook */
+ case 0x1897: /* A6L notebook */
+ asus_hides_smbus = 1;
+ }
+ else if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
+ switch (dev->subsystem_device) {
+ case 0x184b: /* W1N notebook */
+ case 0x186a: /* M6Ne notebook */
+ asus_hides_smbus = 1;
+ }
+ else if (dev->device == PCI_DEVICE_ID_INTEL_82865_HB)
+ switch (dev->subsystem_device) {
+ case 0x80f2: /* P4P800-X */
+ asus_hides_smbus = 1;
+ }
+ else if (dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB)
+ switch (dev->subsystem_device) {
+ case 0x1882: /* M6V notebook */
+ case 0x1977: /* A6VA notebook */
+ asus_hides_smbus = 1;
+ }
+ } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_HP)) {
+ if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
+ switch (dev->subsystem_device) {
+ case 0x088C: /* HP Compaq nc8000 */
+ case 0x0890: /* HP Compaq nc6000 */
+ asus_hides_smbus = 1;
+ }
+ else if (dev->device == PCI_DEVICE_ID_INTEL_82865_HB)
+ switch (dev->subsystem_device) {
+ case 0x12bc: /* HP D330L */
+ case 0x12bd: /* HP D530 */
+ case 0x006a: /* HP Compaq nx9500 */
+ asus_hides_smbus = 1;
+ }
+ else if (dev->device == PCI_DEVICE_ID_INTEL_82875_HB)
+ switch (dev->subsystem_device) {
+ case 0x12bf: /* HP xw4100 */
+ asus_hides_smbus = 1;
+ }
+ } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG)) {
+ if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
+ switch (dev->subsystem_device) {
+ case 0xC00C: /* Samsung P35 notebook */
+ asus_hides_smbus = 1;
+ }
+ } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ)) {
+ if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
+ switch (dev->subsystem_device) {
+ case 0x0058: /* Compaq Evo N620c */
+ asus_hides_smbus = 1;
+ }
+ else if (dev->device == PCI_DEVICE_ID_INTEL_82810_IG3)
+ switch (dev->subsystem_device) {
+ case 0xB16C: /* Compaq Deskpro EP 401963-001 (PCA# 010174) */
+ /* Motherboard doesn't have Host bridge
+ * subvendor/subdevice IDs, therefore checking
+ * its on-board VGA controller */
+ asus_hides_smbus = 1;
+ }
+ else if (dev->device == PCI_DEVICE_ID_INTEL_82801DB_2)
+ switch (dev->subsystem_device) {
+ case 0x00b8: /* Compaq Evo D510 CMT */
+ case 0x00b9: /* Compaq Evo D510 SFF */
+ case 0x00ba: /* Compaq Evo D510 USDT */
+ /* Motherboard doesn't have Host bridge
+ * subvendor/subdevice IDs and on-board VGA
+ * controller is disabled if an AGP card is
+ * inserted, therefore checking USB UHCI
+ * Controller #1 */
+ asus_hides_smbus = 1;
+ }
+ else if (dev->device == PCI_DEVICE_ID_INTEL_82815_CGC)
+ switch (dev->subsystem_device) {
+ case 0x001A: /* Compaq Deskpro EN SSF P667 815E */
+ /* Motherboard doesn't have host bridge
+ * subvendor/subdevice IDs, therefore checking
+ * its on-board VGA controller */
+ asus_hides_smbus = 1;
+ }
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82845_HB, asus_hides_smbus_hostbridge);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82845G_HB, asus_hides_smbus_hostbridge);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82850_HB, asus_hides_smbus_hostbridge);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82865_HB, asus_hides_smbus_hostbridge);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82875_HB, asus_hides_smbus_hostbridge);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_7205_0, asus_hides_smbus_hostbridge);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7501_MCH, asus_hides_smbus_hostbridge);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82855PM_HB, asus_hides_smbus_hostbridge);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82855GM_HB, asus_hides_smbus_hostbridge);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82915GM_HB, asus_hides_smbus_hostbridge);
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82810_IG3, asus_hides_smbus_hostbridge);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_2, asus_hides_smbus_hostbridge);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82815_CGC, asus_hides_smbus_hostbridge);
+
+static void asus_hides_smbus_lpc(struct pci_dev *dev)
+{
+ u16 val;
+
+ if (likely(!asus_hides_smbus))
+ return;
+
+ pci_read_config_word(dev, 0xF2, &val);
+ if (val & 0x8) {
+ pci_write_config_word(dev, 0xF2, val & (~0x8));
+ pci_read_config_word(dev, 0xF2, &val);
+ if (val & 0x8)
+ dev_info(&dev->dev, "i801 SMBus device continues to play 'hide and seek'! 0x%x\n",
+ val);
+ else
+ dev_info(&dev->dev, "Enabled i801 SMBus device\n");
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, asus_hides_smbus_lpc);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, asus_hides_smbus_lpc);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, asus_hides_smbus_lpc);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, asus_hides_smbus_lpc);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, asus_hides_smbus_lpc);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, asus_hides_smbus_lpc);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, asus_hides_smbus_lpc);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, asus_hides_smbus_lpc);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, asus_hides_smbus_lpc);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, asus_hides_smbus_lpc);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, asus_hides_smbus_lpc);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, asus_hides_smbus_lpc);
+
+/* It appears we just have one such device. If not, we have a warning */
+static void __iomem *asus_rcba_base;
+static void asus_hides_smbus_lpc_ich6_suspend(struct pci_dev *dev)
+{
+ u32 rcba;
+
+ if (likely(!asus_hides_smbus))
+ return;
+ WARN_ON(asus_rcba_base);
+
+ pci_read_config_dword(dev, 0xF0, &rcba);
+ /* use bits 31:14, 16 kB aligned */
+ asus_rcba_base = ioremap_nocache(rcba & 0xFFFFC000, 0x4000);
+ if (asus_rcba_base == NULL)
+ return;
+}
+
+static void asus_hides_smbus_lpc_ich6_resume_early(struct pci_dev *dev)
+{
+ u32 val;
+
+ if (likely(!asus_hides_smbus || !asus_rcba_base))
+ return;
+ /* read the Function Disable register, dword mode only */
+ val = readl(asus_rcba_base + 0x3418);
+ writel(val & 0xFFFFFFF7, asus_rcba_base + 0x3418); /* enable the SMBus device */
+}
+
+static void asus_hides_smbus_lpc_ich6_resume(struct pci_dev *dev)
+{
+ if (likely(!asus_hides_smbus || !asus_rcba_base))
+ return;
+ iounmap(asus_rcba_base);
+ asus_rcba_base = NULL;
+ dev_info(&dev->dev, "Enabled ICH6/i801 SMBus device\n");
+}
+
+static void asus_hides_smbus_lpc_ich6(struct pci_dev *dev)
+{
+ asus_hides_smbus_lpc_ich6_suspend(dev);
+ asus_hides_smbus_lpc_ich6_resume_early(dev);
+ asus_hides_smbus_lpc_ich6_resume(dev);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6);
+DECLARE_PCI_FIXUP_SUSPEND(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6_suspend);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6_resume);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6_resume_early);
+
+/*
+ * SiS 96x south bridge: BIOS typically hides SMBus device...
+ */
+static void quirk_sis_96x_smbus(struct pci_dev *dev)
+{
+ u8 val = 0;
+ pci_read_config_byte(dev, 0x77, &val);
+ if (val & 0x10) {
+ dev_info(&dev->dev, "Enabling SiS 96x SMBus\n");
+ pci_write_config_byte(dev, 0x77, val & ~0x10);
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_961, quirk_sis_96x_smbus);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_smbus);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_961, quirk_sis_96x_smbus);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_smbus);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus);
+
+/*
+ * ... This is further complicated by the fact that some SiS96x south
+ * bridges pretend to be 85C503/5513 instead. In that case see if we
+ * spotted a compatible north bridge to make sure.
+ * (pci_find_device doesn't work yet)
+ *
+ * We can also enable the sis96x bit in the discovery register..
+ */
+#define SIS_DETECT_REGISTER 0x40
+
+static void quirk_sis_503(struct pci_dev *dev)
+{
+ u8 reg;
+ u16 devid;
+
+ pci_read_config_byte(dev, SIS_DETECT_REGISTER, &reg);
+ pci_write_config_byte(dev, SIS_DETECT_REGISTER, reg | (1 << 6));
+ pci_read_config_word(dev, PCI_DEVICE_ID, &devid);
+ if (((devid & 0xfff0) != 0x0960) && (devid != 0x0018)) {
+ pci_write_config_byte(dev, SIS_DETECT_REGISTER, reg);
+ return;
+ }
+
+ /*
+ * Ok, it now shows up as a 96x.. run the 96x quirk by
+ * hand in case it has already been processed.
+ * (depends on link order, which is apparently not guaranteed)
+ */
+ dev->device = devid;
+ quirk_sis_96x_smbus(dev);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503);
+
+
+/*
+ * On ASUS A8V and A8V Deluxe boards, the onboard AC97 audio controller
+ * and MC97 modem controller are disabled when a second PCI soundcard is
+ * present. This patch, tweaking the VT8237 ISA bridge, enables them.
+ * -- bjd
+ */
+static void asus_hides_ac97_lpc(struct pci_dev *dev)
+{
+ u8 val;
+ int asus_hides_ac97 = 0;
+
+ if (likely(dev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK)) {
+ if (dev->device == PCI_DEVICE_ID_VIA_8237)
+ asus_hides_ac97 = 1;
+ }
+
+ if (!asus_hides_ac97)
+ return;
+
+ pci_read_config_byte(dev, 0x50, &val);
+ if (val & 0xc0) {
+ pci_write_config_byte(dev, 0x50, val & (~0xc0));
+ pci_read_config_byte(dev, 0x50, &val);
+ if (val & 0xc0)
+ dev_info(&dev->dev, "Onboard AC97/MC97 devices continue to play 'hide and seek'! 0x%x\n",
+ val);
+ else
+ dev_info(&dev->dev, "Enabled onboard AC97/MC97 devices\n");
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, asus_hides_ac97_lpc);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, asus_hides_ac97_lpc);
+
+#if defined(CONFIG_ATA) || defined(CONFIG_ATA_MODULE)
+
+/*
+ * If we are using libata we can drive this chip properly but must
+ * do this early on to make the additional device appear during
+ * the PCI scanning.
+ */
+static void quirk_jmicron_ata(struct pci_dev *pdev)
+{
+ u32 conf1, conf5, class;
+ u8 hdr;
+
+ /* Only poke fn 0 */
+ if (PCI_FUNC(pdev->devfn))
+ return;
+
+ pci_read_config_dword(pdev, 0x40, &conf1);
+ pci_read_config_dword(pdev, 0x80, &conf5);
+
+ conf1 &= ~0x00CFF302; /* Clear bit 1, 8, 9, 12-19, 22, 23 */
+ conf5 &= ~(1 << 24); /* Clear bit 24 */
+
+ switch (pdev->device) {
+ case PCI_DEVICE_ID_JMICRON_JMB360: /* SATA single port */
+ case PCI_DEVICE_ID_JMICRON_JMB362: /* SATA dual ports */
+ case PCI_DEVICE_ID_JMICRON_JMB364: /* SATA dual ports */
+ /* The controller should be in single function ahci mode */
+ conf1 |= 0x0002A100; /* Set 8, 13, 15, 17 */
+ break;
+
+ case PCI_DEVICE_ID_JMICRON_JMB365:
+ case PCI_DEVICE_ID_JMICRON_JMB366:
+ /* Redirect IDE second PATA port to the right spot */
+ conf5 |= (1 << 24);
+ /* Fall through */
+ case PCI_DEVICE_ID_JMICRON_JMB361:
+ case PCI_DEVICE_ID_JMICRON_JMB363:
+ case PCI_DEVICE_ID_JMICRON_JMB369:
+ /* Enable dual function mode, AHCI on fn 0, IDE fn1 */
+ /* Set the class codes correctly and then direct IDE 0 */
+ conf1 |= 0x00C2A1B3; /* Set 0, 1, 4, 5, 7, 8, 13, 15, 17, 22, 23 */
+ break;
+
+ case PCI_DEVICE_ID_JMICRON_JMB368:
+ /* The controller should be in single function IDE mode */
+ conf1 |= 0x00C00000; /* Set 22, 23 */
+ break;
+ }
+
+ pci_write_config_dword(pdev, 0x40, conf1);
+ pci_write_config_dword(pdev, 0x80, conf5);
+
+ /* Update pdev accordingly */
+ pci_read_config_byte(pdev, PCI_HEADER_TYPE, &hdr);
+ pdev->hdr_type = hdr & 0x7f;
+ pdev->multifunction = !!(hdr & 0x80);
+
+ pci_read_config_dword(pdev, PCI_CLASS_REVISION, &class);
+ pdev->class = class >> 8;
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB362, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB364, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB369, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB362, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB364, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB369, quirk_jmicron_ata);
+
+#endif
+
+#ifdef CONFIG_X86_IO_APIC
+static void quirk_alder_ioapic(struct pci_dev *pdev)
+{
+ int i;
+
+ if ((pdev->class >> 8) != 0xff00)
+ return;
+
+ /* the first BAR is the location of the IO APIC...we must
+ * not touch this (and it's already covered by the fixmap), so
+ * forcibly insert it into the resource tree */
+ if (pci_resource_start(pdev, 0) && pci_resource_len(pdev, 0))
+ insert_resource(&iomem_resource, &pdev->resource[0]);
+
+ /* The next five BARs all seem to be rubbish, so just clean
+ * them out */
+ for (i = 1; i < 6; i++)
+ memset(&pdev->resource[i], 0, sizeof(pdev->resource[i]));
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EESSC, quirk_alder_ioapic);
+#endif
+
+static void quirk_pcie_mch(struct pci_dev *pdev)
+{
+ pci_msi_off(pdev);
+ pdev->no_msi = 1;
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, quirk_pcie_mch);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7320_MCH, quirk_pcie_mch);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH, quirk_pcie_mch);
+
+
+/*
+ * It's possible for the MSI to get corrupted if shpc and acpi
+ * are used together on certain PXH-based systems.
+ */
+static void quirk_pcie_pxh(struct pci_dev *dev)
+{
+ pci_msi_off(dev);
+ dev->no_msi = 1;
+ dev_warn(&dev->dev, "PXH quirk detected; SHPC device MSI disabled\n");
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHD_0, quirk_pcie_pxh);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHD_1, quirk_pcie_pxh);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_pcie_pxh);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_pcie_pxh);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_pcie_pxh);
+
+/*
+ * Some Intel PCI Express chipsets have trouble with downstream
+ * device power management.
+ */
+static void quirk_intel_pcie_pm(struct pci_dev *dev)
+{
+ pci_pm_d3_delay = 120;
+ dev->no_d1d2 = 1;
+}
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e2, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e3, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e4, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e5, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e6, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e7, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f7, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f8, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f9, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25fa, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2601, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2602, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2603, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2604, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2605, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2606, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2607, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2608, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2609, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260a, quirk_intel_pcie_pm);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260b, quirk_intel_pcie_pm);
+
+#ifdef CONFIG_X86_IO_APIC
+/*
+ * Boot interrupts on some chipsets cannot be turned off. For these chipsets,
+ * remap the original interrupt in the linux kernel to the boot interrupt, so
+ * that a PCI device's interrupt handler is installed on the boot interrupt
+ * line instead.
+ */
+static void quirk_reroute_to_boot_interrupts_intel(struct pci_dev *dev)
+{
+ if (noioapicquirk || noioapicreroute)
+ return;
+
+ dev->irq_reroute_variant = INTEL_IRQ_REROUTE_VARIANT;
+ dev_info(&dev->dev, "rerouting interrupts for [%04x:%04x]\n",
+ dev->vendor, dev->device);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_0, quirk_reroute_to_boot_interrupts_intel);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_1, quirk_reroute_to_boot_interrupts_intel);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0, quirk_reroute_to_boot_interrupts_intel);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_reroute_to_boot_interrupts_intel);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_reroute_to_boot_interrupts_intel);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_reroute_to_boot_interrupts_intel);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_0, quirk_reroute_to_boot_interrupts_intel);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_1, quirk_reroute_to_boot_interrupts_intel);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_0, quirk_reroute_to_boot_interrupts_intel);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_1, quirk_reroute_to_boot_interrupts_intel);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0, quirk_reroute_to_boot_interrupts_intel);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_reroute_to_boot_interrupts_intel);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_reroute_to_boot_interrupts_intel);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_reroute_to_boot_interrupts_intel);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_0, quirk_reroute_to_boot_interrupts_intel);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_1, quirk_reroute_to_boot_interrupts_intel);
+
+/*
+ * On some chipsets we can disable the generation of legacy INTx boot
+ * interrupts.
+ */
+
+/*
+ * IO-APIC1 on 6300ESB generates boot interrupts, see intel order no
+ * 300641-004US, section 5.7.3.
+ */
+#define INTEL_6300_IOAPIC_ABAR 0x40
+#define INTEL_6300_DISABLE_BOOT_IRQ (1<<14)
+
+static void quirk_disable_intel_boot_interrupt(struct pci_dev *dev)
+{
+ u16 pci_config_word;
+
+ if (noioapicquirk)
+ return;
+
+ pci_read_config_word(dev, INTEL_6300_IOAPIC_ABAR, &pci_config_word);
+ pci_config_word |= INTEL_6300_DISABLE_BOOT_IRQ;
+ pci_write_config_word(dev, INTEL_6300_IOAPIC_ABAR, pci_config_word);
+
+ dev_info(&dev->dev, "disabled boot interrupts on device [%04x:%04x]\n",
+ dev->vendor, dev->device);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_10, quirk_disable_intel_boot_interrupt);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_10, quirk_disable_intel_boot_interrupt);
+
+/*
+ * disable boot interrupts on HT-1000
+ */
+#define BC_HT1000_FEATURE_REG 0x64
+#define BC_HT1000_PIC_REGS_ENABLE (1<<0)
+#define BC_HT1000_MAP_IDX 0xC00
+#define BC_HT1000_MAP_DATA 0xC01
+
+static void quirk_disable_broadcom_boot_interrupt(struct pci_dev *dev)
+{
+ u32 pci_config_dword;
+ u8 irq;
+
+ if (noioapicquirk)
+ return;
+
+ pci_read_config_dword(dev, BC_HT1000_FEATURE_REG, &pci_config_dword);
+ pci_write_config_dword(dev, BC_HT1000_FEATURE_REG, pci_config_dword |
+ BC_HT1000_PIC_REGS_ENABLE);
+
+ for (irq = 0x10; irq < 0x10 + 32; irq++) {
+ outb(irq, BC_HT1000_MAP_IDX);
+ outb(0x00, BC_HT1000_MAP_DATA);
+ }
+
+ pci_write_config_dword(dev, BC_HT1000_FEATURE_REG, pci_config_dword);
+
+ dev_info(&dev->dev, "disabled boot interrupts on device [%04x:%04x]\n",
+ dev->vendor, dev->device);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000SB, quirk_disable_broadcom_boot_interrupt);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000SB, quirk_disable_broadcom_boot_interrupt);
+
+/*
+ * disable boot interrupts on AMD and ATI chipsets
+ */
+/*
+ * NOIOAMODE needs to be disabled to disable "boot interrupts". For AMD 8131
+ * rev. A0 and B0, NOIOAMODE needs to be disabled anyway to fix IO-APIC mode
+ * (due to an erratum).
+ */
+#define AMD_813X_MISC 0x40
+#define AMD_813X_NOIOAMODE (1<<0)
+#define AMD_813X_REV_B1 0x12
+#define AMD_813X_REV_B2 0x13
+
+static void quirk_disable_amd_813x_boot_interrupt(struct pci_dev *dev)
+{
+ u32 pci_config_dword;
+
+ if (noioapicquirk)
+ return;
+ if ((dev->revision == AMD_813X_REV_B1) ||
+ (dev->revision == AMD_813X_REV_B2))
+ return;
+
+ pci_read_config_dword(dev, AMD_813X_MISC, &pci_config_dword);
+ pci_config_dword &= ~AMD_813X_NOIOAMODE;
+ pci_write_config_dword(dev, AMD_813X_MISC, pci_config_dword);
+
+ dev_info(&dev->dev, "disabled boot interrupts on device [%04x:%04x]\n",
+ dev->vendor, dev->device);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_amd_813x_boot_interrupt);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_amd_813x_boot_interrupt);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE, quirk_disable_amd_813x_boot_interrupt);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE, quirk_disable_amd_813x_boot_interrupt);
+
+#define AMD_8111_PCI_IRQ_ROUTING 0x56
+
+static void quirk_disable_amd_8111_boot_interrupt(struct pci_dev *dev)
+{
+ u16 pci_config_word;
+
+ if (noioapicquirk)
+ return;
+
+ pci_read_config_word(dev, AMD_8111_PCI_IRQ_ROUTING, &pci_config_word);
+ if (!pci_config_word) {
+ dev_info(&dev->dev, "boot interrupts on device [%04x:%04x] already disabled\n",
+ dev->vendor, dev->device);
+ return;
+ }
+ pci_write_config_word(dev, AMD_8111_PCI_IRQ_ROUTING, 0);
+ dev_info(&dev->dev, "disabled boot interrupts on device [%04x:%04x]\n",
+ dev->vendor, dev->device);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS, quirk_disable_amd_8111_boot_interrupt);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS, quirk_disable_amd_8111_boot_interrupt);
+#endif /* CONFIG_X86_IO_APIC */
+
+/*
+ * Toshiba TC86C001 IDE controller reports the standard 8-byte BAR0 size
+ * but the PIO transfers won't work if BAR0 falls at the odd 8 bytes.
+ * Re-allocate the region if needed...
+ */
+static void quirk_tc86c001_ide(struct pci_dev *dev)
+{
+ struct resource *r = &dev->resource[0];
+
+ if (r->start & 0x8) {
+ r->flags |= IORESOURCE_UNSET;
+ r->start = 0;
+ r->end = 0xf;
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA_2,
+ PCI_DEVICE_ID_TOSHIBA_TC86C001_IDE,
+ quirk_tc86c001_ide);
+
+/*
+ * PLX PCI 9050 PCI Target bridge controller has an errata that prevents the
+ * local configuration registers accessible via BAR0 (memory) or BAR1 (i/o)
+ * being read correctly if bit 7 of the base address is set.
+ * The BAR0 or BAR1 region may be disabled (size 0) or enabled (size 128).
+ * Re-allocate the regions to a 256-byte boundary if necessary.
+ */
+static void quirk_plx_pci9050(struct pci_dev *dev)
+{
+ unsigned int bar;
+
+ /* Fixed in revision 2 (PCI 9052). */
+ if (dev->revision >= 2)
+ return;
+ for (bar = 0; bar <= 1; bar++)
+ if (pci_resource_len(dev, bar) == 0x80 &&
+ (pci_resource_start(dev, bar) & 0x80)) {
+ struct resource *r = &dev->resource[bar];
+ dev_info(&dev->dev, "Re-allocating PLX PCI 9050 BAR %u to length 256 to avoid bit 7 bug\n",
+ bar);
+ r->flags |= IORESOURCE_UNSET;
+ r->start = 0;
+ r->end = 0xff;
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+ quirk_plx_pci9050);
+/*
+ * The following Meilhaus (vendor ID 0x1402) device IDs (amongst others)
+ * may be using the PLX PCI 9050: 0x0630, 0x0940, 0x0950, 0x0960, 0x100b,
+ * 0x1400, 0x140a, 0x140b, 0x14e0, 0x14ea, 0x14eb, 0x1604, 0x1608, 0x160c,
+ * 0x168f, 0x2000, 0x2600, 0x3000, 0x810a, 0x810b.
+ *
+ * Currently, device IDs 0x2000 and 0x2600 are used by the Comedi "me_daq"
+ * driver.
+ */
+DECLARE_PCI_FIXUP_HEADER(0x1402, 0x2000, quirk_plx_pci9050);
+DECLARE_PCI_FIXUP_HEADER(0x1402, 0x2600, quirk_plx_pci9050);
+
+static void quirk_netmos(struct pci_dev *dev)
+{
+ unsigned int num_parallel = (dev->subsystem_device & 0xf0) >> 4;
+ unsigned int num_serial = dev->subsystem_device & 0xf;
+
+ /*
+ * These Netmos parts are multiport serial devices with optional
+ * parallel ports. Even when parallel ports are present, they
+ * are identified as class SERIAL, which means the serial driver
+ * will claim them. To prevent this, mark them as class OTHER.
+ * These combo devices should be claimed by parport_serial.
+ *
+ * The subdevice ID is of the form 0x00PS, where <P> is the number
+ * of parallel ports and <S> is the number of serial ports.
+ */
+ switch (dev->device) {
+ case PCI_DEVICE_ID_NETMOS_9835:
+ /* Well, this rule doesn't hold for the following 9835 device */
+ if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM &&
+ dev->subsystem_device == 0x0299)
+ return;
+ case PCI_DEVICE_ID_NETMOS_9735:
+ case PCI_DEVICE_ID_NETMOS_9745:
+ case PCI_DEVICE_ID_NETMOS_9845:
+ case PCI_DEVICE_ID_NETMOS_9855:
+ if (num_parallel) {
+ dev_info(&dev->dev, "Netmos %04x (%u parallel, %u serial); changing class SERIAL to OTHER (use parport_serial)\n",
+ dev->device, num_parallel, num_serial);
+ dev->class = (PCI_CLASS_COMMUNICATION_OTHER << 8) |
+ (dev->class & 0xff);
+ }
+ }
+}
+DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_NETMOS, PCI_ANY_ID,
+ PCI_CLASS_COMMUNICATION_SERIAL, 8, quirk_netmos);
+
+static void quirk_e100_interrupt(struct pci_dev *dev)
+{
+ u16 command, pmcsr;
+ u8 __iomem *csr;
+ u8 cmd_hi;
+
+ switch (dev->device) {
+ /* PCI IDs taken from drivers/net/e100.c */
+ case 0x1029:
+ case 0x1030 ... 0x1034:
+ case 0x1038 ... 0x103E:
+ case 0x1050 ... 0x1057:
+ case 0x1059:
+ case 0x1064 ... 0x106B:
+ case 0x1091 ... 0x1095:
+ case 0x1209:
+ case 0x1229:
+ case 0x2449:
+ case 0x2459:
+ case 0x245D:
+ case 0x27DC:
+ break;
+ default:
+ return;
+ }
+
+ /*
+ * Some firmware hands off the e100 with interrupts enabled,
+ * which can cause a flood of interrupts if packets are
+ * received before the driver attaches to the device. So
+ * disable all e100 interrupts here. The driver will
+ * re-enable them when it's ready.
+ */
+ pci_read_config_word(dev, PCI_COMMAND, &command);
+
+ if (!(command & PCI_COMMAND_MEMORY) || !pci_resource_start(dev, 0))
+ return;
+
+ /*
+ * Check that the device is in the D0 power state. If it's not,
+ * there is no point to look any further.
+ */
+ if (dev->pm_cap) {
+ pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
+ if ((pmcsr & PCI_PM_CTRL_STATE_MASK) != PCI_D0)
+ return;
+ }
+
+ /* Convert from PCI bus to resource space. */
+ csr = ioremap(pci_resource_start(dev, 0), 8);
+ if (!csr) {
+ dev_warn(&dev->dev, "Can't map e100 registers\n");
+ return;
+ }
+
+ cmd_hi = readb(csr + 3);
+ if (cmd_hi == 0) {
+ dev_warn(&dev->dev, "Firmware left e100 interrupts enabled; disabling\n");
+ writeb(1, csr + 3);
+ }
+
+ iounmap(csr);
+}
+DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID,
+ PCI_CLASS_NETWORK_ETHERNET, 8, quirk_e100_interrupt);
+
+/*
+ * The 82575 and 82598 may experience data corruption issues when transitioning
+ * out of L0S. To prevent this we need to disable L0S on the pci-e link
+ */
+static void quirk_disable_aspm_l0s(struct pci_dev *dev)
+{
+ dev_info(&dev->dev, "Disabling L0s\n");
+ pci_disable_link_state(dev, PCIE_LINK_STATE_L0S);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10a7, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10a9, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10b6, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c6, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c7, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c8, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10d6, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10db, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10dd, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10e1, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10ec, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10f1, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10f4, quirk_disable_aspm_l0s);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1508, quirk_disable_aspm_l0s);
+
+static void fixup_rev1_53c810(struct pci_dev *dev)
+{
+ /* rev 1 ncr53c810 chips don't set the class at all which means
+ * they don't get their resources remapped. Fix that here.
+ */
+
+ if (dev->class == PCI_CLASS_NOT_DEFINED) {
+ dev_info(&dev->dev, "NCR 53c810 rev 1 detected; setting PCI class\n");
+ dev->class = PCI_CLASS_STORAGE_SCSI;
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810);
+
+/* Enable 1k I/O space granularity on the Intel P64H2 */
+static void quirk_p64h2_1k_io(struct pci_dev *dev)
+{
+ u16 en1k;
+
+ pci_read_config_word(dev, 0x40, &en1k);
+
+ if (en1k & 0x200) {
+ dev_info(&dev->dev, "Enable I/O Space to 1KB granularity\n");
+ dev->io_window_1k = 1;
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1460, quirk_p64h2_1k_io);
+
+/* Under some circumstances, AER is not linked with extended capabilities.
+ * Force it to be linked by setting the corresponding control bit in the
+ * config space.
+ */
+static void quirk_nvidia_ck804_pcie_aer_ext_cap(struct pci_dev *dev)
+{
+ uint8_t b;
+ if (pci_read_config_byte(dev, 0xf41, &b) == 0) {
+ if (!(b & 0x20)) {
+ pci_write_config_byte(dev, 0xf41, b | 0x20);
+ dev_info(&dev->dev, "Linking AER extended capability\n");
+ }
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE,
+ quirk_nvidia_ck804_pcie_aer_ext_cap);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE,
+ quirk_nvidia_ck804_pcie_aer_ext_cap);
+
+static void quirk_via_cx700_pci_parking_caching(struct pci_dev *dev)
+{
+ /*
+ * Disable PCI Bus Parking and PCI Master read caching on CX700
+ * which causes unspecified timing errors with a VT6212L on the PCI
+ * bus leading to USB2.0 packet loss.
+ *
+ * This quirk is only enabled if a second (on the external PCI bus)
+ * VT6212L is found -- the CX700 core itself also contains a USB
+ * host controller with the same PCI ID as the VT6212L.
+ */
+
+ /* Count VT6212L instances */
+ struct pci_dev *p = pci_get_device(PCI_VENDOR_ID_VIA,
+ PCI_DEVICE_ID_VIA_8235_USB_2, NULL);
+ uint8_t b;
+
+ /* p should contain the first (internal) VT6212L -- see if we have
+ an external one by searching again */
+ p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235_USB_2, p);
+ if (!p)
+ return;
+ pci_dev_put(p);
+
+ if (pci_read_config_byte(dev, 0x76, &b) == 0) {
+ if (b & 0x40) {
+ /* Turn off PCI Bus Parking */
+ pci_write_config_byte(dev, 0x76, b ^ 0x40);
+
+ dev_info(&dev->dev, "Disabling VIA CX700 PCI parking\n");
+ }
+ }
+
+ if (pci_read_config_byte(dev, 0x72, &b) == 0) {
+ if (b != 0) {
+ /* Turn off PCI Master read caching */
+ pci_write_config_byte(dev, 0x72, 0x0);
+
+ /* Set PCI Master Bus time-out to "1x16 PCLK" */
+ pci_write_config_byte(dev, 0x75, 0x1);
+
+ /* Disable "Read FIFO Timer" */
+ pci_write_config_byte(dev, 0x77, 0x0);
+
+ dev_info(&dev->dev, "Disabling VIA CX700 PCI caching\n");
+ }
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, 0x324e, quirk_via_cx700_pci_parking_caching);
+
+/*
+ * For Broadcom 5706, 5708, 5709 rev. A nics, any read beyond the
+ * VPD end tag will hang the device. This problem was initially
+ * observed when a vpd entry was created in sysfs
+ * ('/sys/bus/pci/devices/<id>/vpd'). A read to this sysfs entry
+ * will dump 32k of data. Reading a full 32k will cause an access
+ * beyond the VPD end tag causing the device to hang. Once the device
+ * is hung, the bnx2 driver will not be able to reset the device.
+ * We believe that it is legal to read beyond the end tag and
+ * therefore the solution is to limit the read/write length.
+ */
+static void quirk_brcm_570x_limit_vpd(struct pci_dev *dev)
+{
+ /*
+ * Only disable the VPD capability for 5706, 5706S, 5708,
+ * 5708S and 5709 rev. A
+ */
+ if ((dev->device == PCI_DEVICE_ID_NX2_5706) ||
+ (dev->device == PCI_DEVICE_ID_NX2_5706S) ||
+ (dev->device == PCI_DEVICE_ID_NX2_5708) ||
+ (dev->device == PCI_DEVICE_ID_NX2_5708S) ||
+ ((dev->device == PCI_DEVICE_ID_NX2_5709) &&
+ (dev->revision & 0xf0) == 0x0)) {
+ if (dev->vpd)
+ dev->vpd->len = 0x80;
+ }
+}
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
+ PCI_DEVICE_ID_NX2_5706,
+ quirk_brcm_570x_limit_vpd);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
+ PCI_DEVICE_ID_NX2_5706S,
+ quirk_brcm_570x_limit_vpd);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
+ PCI_DEVICE_ID_NX2_5708,
+ quirk_brcm_570x_limit_vpd);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
+ PCI_DEVICE_ID_NX2_5708S,
+ quirk_brcm_570x_limit_vpd);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
+ PCI_DEVICE_ID_NX2_5709,
+ quirk_brcm_570x_limit_vpd);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
+ PCI_DEVICE_ID_NX2_5709S,
+ quirk_brcm_570x_limit_vpd);
+
+static void quirk_brcm_5719_limit_mrrs(struct pci_dev *dev)
+{
+ u32 rev;
+
+ pci_read_config_dword(dev, 0xf4, &rev);
+
+ /* Only CAP the MRRS if the device is a 5719 A0 */
+ if (rev == 0x05719000) {
+ int readrq = pcie_get_readrq(dev);
+ if (readrq > 2048)
+ pcie_set_readrq(dev, 2048);
+ }
+}
+
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_BROADCOM,
+ PCI_DEVICE_ID_TIGON3_5719,
+ quirk_brcm_5719_limit_mrrs);
+
+/* Originally in EDAC sources for i82875P:
+ * Intel tells BIOS developers to hide device 6 which
+ * configures the overflow device access containing
+ * the DRBs - this is where we expose device 6.
+ * http://www.x86-secret.com/articles/tweak/pat/patsecrets-2.htm
+ */
+static void quirk_unhide_mch_dev6(struct pci_dev *dev)
+{
+ u8 reg;
+
+ if (pci_read_config_byte(dev, 0xF4, &reg) == 0 && !(reg & 0x02)) {
+ dev_info(&dev->dev, "Enabling MCH 'Overflow' Device\n");
+ pci_write_config_byte(dev, 0xF4, reg | 0x02);
+ }
+}
+
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82865_HB,
+ quirk_unhide_mch_dev6);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82875_HB,
+ quirk_unhide_mch_dev6);
+
+#ifdef CONFIG_TILEPRO
+/*
+ * The Tilera TILEmpower tilepro platform needs to set the link speed
+ * to 2.5GT(Giga-Transfers)/s (Gen 1). The default link speed
+ * setting is 5GT/s (Gen 2). 0x98 is the Link Control2 PCIe
+ * capability register of the PEX8624 PCIe switch. The switch
+ * supports link speed auto negotiation, but falsely sets
+ * the link speed to 5GT/s.
+ */
+static void quirk_tile_plx_gen1(struct pci_dev *dev)
+{
+ if (tile_plx_gen1) {
+ pci_write_config_dword(dev, 0x98, 0x1);
+ mdelay(50);
+ }
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8624, quirk_tile_plx_gen1);
+#endif /* CONFIG_TILEPRO */
+
+#ifdef CONFIG_PCI_MSI
+/* Some chipsets do not support MSI. We cannot easily rely on setting
+ * PCI_BUS_FLAGS_NO_MSI in its bus flags because there are actually
+ * some other buses controlled by the chipset even if Linux is not
+ * aware of it. Instead of setting the flag on all buses in the
+ * machine, simply disable MSI globally.
+ */
+static void quirk_disable_all_msi(struct pci_dev *dev)
+{
+ pci_no_msi();
+ dev_warn(&dev->dev, "MSI quirk detected; MSI disabled\n");
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_GCNB_LE, quirk_disable_all_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS400_200, quirk_disable_all_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS480, quirk_disable_all_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3336, quirk_disable_all_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3351, quirk_disable_all_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3364, quirk_disable_all_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8380_0, quirk_disable_all_msi);
+
+/* Disable MSI on chipsets that are known to not support it */
+static void quirk_disable_msi(struct pci_dev *dev)
+{
+ if (dev->subordinate) {
+ dev_warn(&dev->dev, "MSI quirk detected; subordinate MSI disabled\n");
+ dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI;
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, 0xa238, quirk_disable_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x5a3f, quirk_disable_msi);
+
+/*
+ * The APC bridge device in AMD 780 family northbridges has some random
+ * OEM subsystem ID in its vendor ID register (erratum 18), so instead
+ * we use the possible vendor/device IDs of the host bridge for the
+ * declared quirk, and search for the APC bridge by slot number.
+ */
+static void quirk_amd_780_apc_msi(struct pci_dev *host_bridge)
+{
+ struct pci_dev *apc_bridge;
+
+ apc_bridge = pci_get_slot(host_bridge->bus, PCI_DEVFN(1, 0));
+ if (apc_bridge) {
+ if (apc_bridge->device == 0x9602)
+ quirk_disable_msi(apc_bridge);
+ pci_dev_put(apc_bridge);
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x9600, quirk_amd_780_apc_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x9601, quirk_amd_780_apc_msi);
+
+/* Go through the list of Hypertransport capabilities and
+ * return 1 if a HT MSI capability is found and enabled */
+static int msi_ht_cap_enabled(struct pci_dev *dev)
+{
+ int pos, ttl = 48;
+
+ pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING);
+ while (pos && ttl--) {
+ u8 flags;
+
+ if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS,
+ &flags) == 0) {
+ dev_info(&dev->dev, "Found %s HT MSI Mapping\n",
+ flags & HT_MSI_FLAGS_ENABLE ?
+ "enabled" : "disabled");
+ return (flags & HT_MSI_FLAGS_ENABLE) != 0;
+ }
+
+ pos = pci_find_next_ht_capability(dev, pos,
+ HT_CAPTYPE_MSI_MAPPING);
+ }
+ return 0;
+}
+
+/* Check the hypertransport MSI mapping to know whether MSI is enabled or not */
+static void quirk_msi_ht_cap(struct pci_dev *dev)
+{
+ if (dev->subordinate && !msi_ht_cap_enabled(dev)) {
+ dev_warn(&dev->dev, "MSI quirk detected; subordinate MSI disabled\n");
+ dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI;
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE,
+ quirk_msi_ht_cap);
+
+/* The nVidia CK804 chipset may have 2 HT MSI mappings.
+ * MSI are supported if the MSI capability set in any of these mappings.
+ */
+static void quirk_nvidia_ck804_msi_ht_cap(struct pci_dev *dev)
+{
+ struct pci_dev *pdev;
+
+ if (!dev->subordinate)
+ return;
+
+ /* check HT MSI cap on this chipset and the root one.
+ * a single one having MSI is enough to be sure that MSI are supported.
+ */
+ pdev = pci_get_slot(dev->bus, 0);
+ if (!pdev)
+ return;
+ if (!msi_ht_cap_enabled(dev) && !msi_ht_cap_enabled(pdev)) {
+ dev_warn(&dev->dev, "MSI quirk detected; subordinate MSI disabled\n");
+ dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI;
+ }
+ pci_dev_put(pdev);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE,
+ quirk_nvidia_ck804_msi_ht_cap);
+
+/* Force enable MSI mapping capability on HT bridges */
+static void ht_enable_msi_mapping(struct pci_dev *dev)
+{
+ int pos, ttl = 48;
+
+ pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING);
+ while (pos && ttl--) {
+ u8 flags;
+
+ if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS,
+ &flags) == 0) {
+ dev_info(&dev->dev, "Enabling HT MSI Mapping\n");
+
+ pci_write_config_byte(dev, pos + HT_MSI_FLAGS,
+ flags | HT_MSI_FLAGS_ENABLE);
+ }
+ pos = pci_find_next_ht_capability(dev, pos,
+ HT_CAPTYPE_MSI_MAPPING);
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS,
+ PCI_DEVICE_ID_SERVERWORKS_HT1000_PXB,
+ ht_enable_msi_mapping);
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE,
+ ht_enable_msi_mapping);
+
+/* The P5N32-SLI motherboards from Asus have a problem with msi
+ * for the MCP55 NIC. It is not yet determined whether the msi problem
+ * also affects other devices. As for now, turn off msi for this device.
+ */
+static void nvenet_msi_disable(struct pci_dev *dev)
+{
+ const char *board_name = dmi_get_system_info(DMI_BOARD_NAME);
+
+ if (board_name &&
+ (strstr(board_name, "P5N32-SLI PREMIUM") ||
+ strstr(board_name, "P5N32-E SLI"))) {
+ dev_info(&dev->dev, "Disabling msi for MCP55 NIC on P5N32-SLI\n");
+ dev->no_msi = 1;
+ }
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA,
+ PCI_DEVICE_ID_NVIDIA_NVENET_15,
+ nvenet_msi_disable);
+
+/*
+ * Some versions of the MCP55 bridge from Nvidia have a legacy IRQ routing
+ * config register. This register controls the routing of legacy
+ * interrupts from devices that route through the MCP55. If this register
+ * is misprogrammed, interrupts are only sent to the BSP, unlike
+ * conventional systems where the IRQ is broadcast to all online CPUs. Not
+ * having this register set properly prevents kdump from booting up
+ * properly, so let's make sure that we have it set correctly.
+ * Note that this is an undocumented register.
+ */
+static void nvbridge_check_legacy_irq_routing(struct pci_dev *dev)
+{
+ u32 cfg;
+
+ if (!pci_find_capability(dev, PCI_CAP_ID_HT))
+ return;
+
+ pci_read_config_dword(dev, 0x74, &cfg);
+
+ if (cfg & ((1 << 2) | (1 << 15))) {
+ printk(KERN_INFO "Rewriting irq routing register on MCP55\n");
+ cfg &= ~((1 << 2) | (1 << 15));
+ pci_write_config_dword(dev, 0x74, cfg);
+ }
+}
+
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA,
+ PCI_DEVICE_ID_NVIDIA_MCP55_BRIDGE_V0,
+ nvbridge_check_legacy_irq_routing);
+
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA,
+ PCI_DEVICE_ID_NVIDIA_MCP55_BRIDGE_V4,
+ nvbridge_check_legacy_irq_routing);
+
+static int ht_check_msi_mapping(struct pci_dev *dev)
+{
+ int pos, ttl = 48;
+ int found = 0;
+
+ /* check if there is HT MSI cap or enabled on this device */
+ pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING);
+ while (pos && ttl--) {
+ u8 flags;
+
+ if (found < 1)
+ found = 1;
+ if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS,
+ &flags) == 0) {
+ if (flags & HT_MSI_FLAGS_ENABLE) {
+ if (found < 2) {
+ found = 2;
+ break;
+ }
+ }
+ }
+ pos = pci_find_next_ht_capability(dev, pos,
+ HT_CAPTYPE_MSI_MAPPING);
+ }
+
+ return found;
+}
+
+static int host_bridge_with_leaf(struct pci_dev *host_bridge)
+{
+ struct pci_dev *dev;
+ int pos;
+ int i, dev_no;
+ int found = 0;
+
+ dev_no = host_bridge->devfn >> 3;
+ for (i = dev_no + 1; i < 0x20; i++) {
+ dev = pci_get_slot(host_bridge->bus, PCI_DEVFN(i, 0));
+ if (!dev)
+ continue;
+
+ /* found next host bridge ?*/
+ pos = pci_find_ht_capability(dev, HT_CAPTYPE_SLAVE);
+ if (pos != 0) {
+ pci_dev_put(dev);
+ break;
+ }
+
+ if (ht_check_msi_mapping(dev)) {
+ found = 1;
+ pci_dev_put(dev);
+ break;
+ }
+ pci_dev_put(dev);
+ }
+
+ return found;
+}
+
+#define PCI_HT_CAP_SLAVE_CTRL0 4 /* link control */
+#define PCI_HT_CAP_SLAVE_CTRL1 8 /* link control to */
+
+static int is_end_of_ht_chain(struct pci_dev *dev)
+{
+ int pos, ctrl_off;
+ int end = 0;
+ u16 flags, ctrl;
+
+ pos = pci_find_ht_capability(dev, HT_CAPTYPE_SLAVE);
+
+ if (!pos)
+ goto out;
+
+ pci_read_config_word(dev, pos + PCI_CAP_FLAGS, &flags);
+
+ ctrl_off = ((flags >> 10) & 1) ?
+ PCI_HT_CAP_SLAVE_CTRL0 : PCI_HT_CAP_SLAVE_CTRL1;
+ pci_read_config_word(dev, pos + ctrl_off, &ctrl);
+
+ if (ctrl & (1 << 6))
+ end = 1;
+
+out:
+ return end;
+}
+
+static void nv_ht_enable_msi_mapping(struct pci_dev *dev)
+{
+ struct pci_dev *host_bridge;
+ int pos;
+ int i, dev_no;
+ int found = 0;
+
+ dev_no = dev->devfn >> 3;
+ for (i = dev_no; i >= 0; i--) {
+ host_bridge = pci_get_slot(dev->bus, PCI_DEVFN(i, 0));
+ if (!host_bridge)
+ continue;
+
+ pos = pci_find_ht_capability(host_bridge, HT_CAPTYPE_SLAVE);
+ if (pos != 0) {
+ found = 1;
+ break;
+ }
+ pci_dev_put(host_bridge);
+ }
+
+ if (!found)
+ return;
+
+ /* don't enable end_device/host_bridge with leaf directly here */
+ if (host_bridge == dev && is_end_of_ht_chain(host_bridge) &&
+ host_bridge_with_leaf(host_bridge))
+ goto out;
+
+ /* root did that ! */
+ if (msi_ht_cap_enabled(host_bridge))
+ goto out;
+
+ ht_enable_msi_mapping(dev);
+
+out:
+ pci_dev_put(host_bridge);
+}
+
+static void ht_disable_msi_mapping(struct pci_dev *dev)
+{
+ int pos, ttl = 48;
+
+ pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING);
+ while (pos && ttl--) {
+ u8 flags;
+
+ if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS,
+ &flags) == 0) {
+ dev_info(&dev->dev, "Disabling HT MSI Mapping\n");
+
+ pci_write_config_byte(dev, pos + HT_MSI_FLAGS,
+ flags & ~HT_MSI_FLAGS_ENABLE);
+ }
+ pos = pci_find_next_ht_capability(dev, pos,
+ HT_CAPTYPE_MSI_MAPPING);
+ }
+}
+
+static void __nv_msi_ht_cap_quirk(struct pci_dev *dev, int all)
+{
+ struct pci_dev *host_bridge;
+ int pos;
+ int found;
+
+ if (!pci_msi_enabled())
+ return;
+
+ /* check if there is HT MSI cap or enabled on this device */
+ found = ht_check_msi_mapping(dev);
+
+ /* no HT MSI CAP */
+ if (found == 0)
+ return;
+
+ /*
+ * HT MSI mapping should be disabled on devices that are below
+ * a non-Hypertransport host bridge. Locate the host bridge...
+ */
+ host_bridge = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0));
+ if (host_bridge == NULL) {
+ dev_warn(&dev->dev, "nv_msi_ht_cap_quirk didn't locate host bridge\n");
+ return;
+ }
+
+ pos = pci_find_ht_capability(host_bridge, HT_CAPTYPE_SLAVE);
+ if (pos != 0) {
+ /* Host bridge is to HT */
+ if (found == 1) {
+ /* it is not enabled, try to enable it */
+ if (all)
+ ht_enable_msi_mapping(dev);
+ else
+ nv_ht_enable_msi_mapping(dev);
+ }
+ goto out;
+ }
+
+ /* HT MSI is not enabled */
+ if (found == 1)
+ goto out;
+
+ /* Host bridge is not to HT, disable HT MSI mapping on this device */
+ ht_disable_msi_mapping(dev);
+
+out:
+ pci_dev_put(host_bridge);
+}
+
+static void nv_msi_ht_cap_quirk_all(struct pci_dev *dev)
+{
+ return __nv_msi_ht_cap_quirk(dev, 1);
+}
+
+static void nv_msi_ht_cap_quirk_leaf(struct pci_dev *dev)
+{
+ return __nv_msi_ht_cap_quirk(dev, 0);
+}
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, nv_msi_ht_cap_quirk_leaf);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, nv_msi_ht_cap_quirk_leaf);
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk_all);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk_all);
+
+static void quirk_msi_intx_disable_bug(struct pci_dev *dev)
+{
+ dev->dev_flags |= PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG;
+}
+static void quirk_msi_intx_disable_ati_bug(struct pci_dev *dev)
+{
+ struct pci_dev *p;
+
+ /* SB700 MSI issue will be fixed at HW level from revision A21,
+ * we need check PCI REVISION ID of SMBus controller to get SB700
+ * revision.
+ */
+ p = pci_get_device(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS,
+ NULL);
+ if (!p)
+ return;
+
+ if ((p->revision < 0x3B) && (p->revision >= 0x30))
+ dev->dev_flags |= PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG;
+ pci_dev_put(p);
+}
+static void quirk_msi_intx_disable_qca_bug(struct pci_dev *dev)
+{
+ /* AR816X/AR817X/E210X MSI is fixed at HW level from revision 0x18 */
+ if (dev->revision < 0x18) {
+ dev_info(&dev->dev, "set MSI_INTX_DISABLE_BUG flag\n");
+ dev->dev_flags |= PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG;
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
+ PCI_DEVICE_ID_TIGON3_5780,
+ quirk_msi_intx_disable_bug);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
+ PCI_DEVICE_ID_TIGON3_5780S,
+ quirk_msi_intx_disable_bug);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
+ PCI_DEVICE_ID_TIGON3_5714,
+ quirk_msi_intx_disable_bug);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
+ PCI_DEVICE_ID_TIGON3_5714S,
+ quirk_msi_intx_disable_bug);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
+ PCI_DEVICE_ID_TIGON3_5715,
+ quirk_msi_intx_disable_bug);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
+ PCI_DEVICE_ID_TIGON3_5715S,
+ quirk_msi_intx_disable_bug);
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4390,
+ quirk_msi_intx_disable_ati_bug);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4391,
+ quirk_msi_intx_disable_ati_bug);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4392,
+ quirk_msi_intx_disable_ati_bug);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4393,
+ quirk_msi_intx_disable_ati_bug);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4394,
+ quirk_msi_intx_disable_ati_bug);
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4373,
+ quirk_msi_intx_disable_bug);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4374,
+ quirk_msi_intx_disable_bug);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4375,
+ quirk_msi_intx_disable_bug);
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1062,
+ quirk_msi_intx_disable_bug);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1063,
+ quirk_msi_intx_disable_bug);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x2060,
+ quirk_msi_intx_disable_bug);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x2062,
+ quirk_msi_intx_disable_bug);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1073,
+ quirk_msi_intx_disable_bug);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1083,
+ quirk_msi_intx_disable_bug);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1090,
+ quirk_msi_intx_disable_qca_bug);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1091,
+ quirk_msi_intx_disable_qca_bug);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x10a0,
+ quirk_msi_intx_disable_qca_bug);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x10a1,
+ quirk_msi_intx_disable_qca_bug);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0xe091,
+ quirk_msi_intx_disable_qca_bug);
+#endif /* CONFIG_PCI_MSI */
+
+/* Allow manual resource allocation for PCI hotplug bridges
+ * via pci=hpmemsize=nnM and pci=hpiosize=nnM parameters. For
+ * some PCI-PCI hotplug bridges, like PLX 6254 (former HINT HB6),
+ * kernel fails to allocate resources when hotplug device is
+ * inserted and PCI bus is rescanned.
+ */
+static void quirk_hotplug_bridge(struct pci_dev *dev)
+{
+ dev->is_hotplug_bridge = 1;
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_HINT, 0x0020, quirk_hotplug_bridge);
+
+/*
+ * This is a quirk for the Ricoh MMC controller found as a part of
+ * some mulifunction chips.
+
+ * This is very similar and based on the ricoh_mmc driver written by
+ * Philip Langdale. Thank you for these magic sequences.
+ *
+ * These chips implement the four main memory card controllers (SD, MMC, MS, xD)
+ * and one or both of cardbus or firewire.
+ *
+ * It happens that they implement SD and MMC
+ * support as separate controllers (and PCI functions). The linux SDHCI
+ * driver supports MMC cards but the chip detects MMC cards in hardware
+ * and directs them to the MMC controller - so the SDHCI driver never sees
+ * them.
+ *
+ * To get around this, we must disable the useless MMC controller.
+ * At that point, the SDHCI controller will start seeing them
+ * It seems to be the case that the relevant PCI registers to deactivate the
+ * MMC controller live on PCI function 0, which might be the cardbus controller
+ * or the firewire controller, depending on the particular chip in question
+ *
+ * This has to be done early, because as soon as we disable the MMC controller
+ * other pci functions shift up one level, e.g. function #2 becomes function
+ * #1, and this will confuse the pci core.
+ */
+
+#ifdef CONFIG_MMC_RICOH_MMC
+static void ricoh_mmc_fixup_rl5c476(struct pci_dev *dev)
+{
+ /* disable via cardbus interface */
+ u8 write_enable;
+ u8 write_target;
+ u8 disable;
+
+ /* disable must be done via function #0 */
+ if (PCI_FUNC(dev->devfn))
+ return;
+
+ pci_read_config_byte(dev, 0xB7, &disable);
+ if (disable & 0x02)
+ return;
+
+ pci_read_config_byte(dev, 0x8E, &write_enable);
+ pci_write_config_byte(dev, 0x8E, 0xAA);
+ pci_read_config_byte(dev, 0x8D, &write_target);
+ pci_write_config_byte(dev, 0x8D, 0xB7);
+ pci_write_config_byte(dev, 0xB7, disable | 0x02);
+ pci_write_config_byte(dev, 0x8E, write_enable);
+ pci_write_config_byte(dev, 0x8D, write_target);
+
+ dev_notice(&dev->dev, "proprietary Ricoh MMC controller disabled (via cardbus function)\n");
+ dev_notice(&dev->dev, "MMC cards are now supported by standard SDHCI controller\n");
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, ricoh_mmc_fixup_rl5c476);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, ricoh_mmc_fixup_rl5c476);
+
+static void ricoh_mmc_fixup_r5c832(struct pci_dev *dev)
+{
+ /* disable via firewire interface */
+ u8 write_enable;
+ u8 disable;
+
+ /* disable must be done via function #0 */
+ if (PCI_FUNC(dev->devfn))
+ return;
+ /*
+ * RICOH 0xe822 and 0xe823 SD/MMC card readers fail to recognize
+ * certain types of SD/MMC cards. Lowering the SD base
+ * clock frequency from 200Mhz to 50Mhz fixes this issue.
+ *
+ * 0x150 - SD2.0 mode enable for changing base clock
+ * frequency to 50Mhz
+ * 0xe1 - Base clock frequency
+ * 0x32 - 50Mhz new clock frequency
+ * 0xf9 - Key register for 0x150
+ * 0xfc - key register for 0xe1
+ */
+ if (dev->device == PCI_DEVICE_ID_RICOH_R5CE822 ||
+ dev->device == PCI_DEVICE_ID_RICOH_R5CE823) {
+ pci_write_config_byte(dev, 0xf9, 0xfc);
+ pci_write_config_byte(dev, 0x150, 0x10);
+ pci_write_config_byte(dev, 0xf9, 0x00);
+ pci_write_config_byte(dev, 0xfc, 0x01);
+ pci_write_config_byte(dev, 0xe1, 0x32);
+ pci_write_config_byte(dev, 0xfc, 0x00);
+
+ dev_notice(&dev->dev, "MMC controller base frequency changed to 50Mhz.\n");
+ }
+
+ pci_read_config_byte(dev, 0xCB, &disable);
+
+ if (disable & 0x02)
+ return;
+
+ pci_read_config_byte(dev, 0xCA, &write_enable);
+ pci_write_config_byte(dev, 0xCA, 0x57);
+ pci_write_config_byte(dev, 0xCB, disable | 0x02);
+ pci_write_config_byte(dev, 0xCA, write_enable);
+
+ dev_notice(&dev->dev, "proprietary Ricoh MMC controller disabled (via firewire function)\n");
+ dev_notice(&dev->dev, "MMC cards are now supported by standard SDHCI controller\n");
+
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE822, ricoh_mmc_fixup_r5c832);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE822, ricoh_mmc_fixup_r5c832);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE823, ricoh_mmc_fixup_r5c832);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE823, ricoh_mmc_fixup_r5c832);
+#endif /*CONFIG_MMC_RICOH_MMC*/
+
+#ifdef CONFIG_DMAR_TABLE
+#define VTUNCERRMSK_REG 0x1ac
+#define VTD_MSK_SPEC_ERRORS (1 << 31)
+/*
+ * This is a quirk for masking vt-d spec defined errors to platform error
+ * handling logic. With out this, platforms using Intel 7500, 5500 chipsets
+ * (and the derivative chipsets like X58 etc) seem to generate NMI/SMI (based
+ * on the RAS config settings of the platform) when a vt-d fault happens.
+ * The resulting SMI caused the system to hang.
+ *
+ * VT-d spec related errors are already handled by the VT-d OS code, so no
+ * need to report the same error through other channels.
+ */
+static void vtd_mask_spec_errors(struct pci_dev *dev)
+{
+ u32 word;
+
+ pci_read_config_dword(dev, VTUNCERRMSK_REG, &word);
+ pci_write_config_dword(dev, VTUNCERRMSK_REG, word | VTD_MSK_SPEC_ERRORS);
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x342e, vtd_mask_spec_errors);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x3c28, vtd_mask_spec_errors);
+#endif
+
+static void fixup_ti816x_class(struct pci_dev *dev)
+{
+ /* TI 816x devices do not have class code set when in PCIe boot mode */
+ dev_info(&dev->dev, "Setting PCI class for 816x PCIe device\n");
+ dev->class = PCI_CLASS_MULTIMEDIA_VIDEO;
+}
+DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_TI, 0xb800,
+ PCI_CLASS_NOT_DEFINED, 0, fixup_ti816x_class);
+
+/* Some PCIe devices do not work reliably with the claimed maximum
+ * payload size supported.
+ */
+static void fixup_mpss_256(struct pci_dev *dev)
+{
+ dev->pcie_mpss = 1; /* 256 bytes */
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE,
+ PCI_DEVICE_ID_SOLARFLARE_SFC4000A_0, fixup_mpss_256);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE,
+ PCI_DEVICE_ID_SOLARFLARE_SFC4000A_1, fixup_mpss_256);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE,
+ PCI_DEVICE_ID_SOLARFLARE_SFC4000B, fixup_mpss_256);
+
+/* Intel 5000 and 5100 Memory controllers have an errata with read completion
+ * coalescing (which is enabled by default on some BIOSes) and MPS of 256B.
+ * Since there is no way of knowing what the PCIE MPS on each fabric will be
+ * until all of the devices are discovered and buses walked, read completion
+ * coalescing must be disabled. Unfortunately, it cannot be re-enabled because
+ * it is possible to hotplug a device with MPS of 256B.
+ */
+static void quirk_intel_mc_errata(struct pci_dev *dev)
+{
+ int err;
+ u16 rcc;
+
+ if (pcie_bus_config == PCIE_BUS_TUNE_OFF)
+ return;
+
+ /* Intel errata specifies bits to change but does not say what they are.
+ * Keeping them magical until such time as the registers and values can
+ * be explained.
+ */
+ err = pci_read_config_word(dev, 0x48, &rcc);
+ if (err) {
+ dev_err(&dev->dev, "Error attempting to read the read completion coalescing register\n");
+ return;
+ }
+
+ if (!(rcc & (1 << 10)))
+ return;
+
+ rcc &= ~(1 << 10);
+
+ err = pci_write_config_word(dev, 0x48, rcc);
+ if (err) {
+ dev_err(&dev->dev, "Error attempting to write the read completion coalescing register\n");
+ return;
+ }
+
+ pr_info_once("Read completion coalescing disabled due to hardware errata relating to 256B MPS\n");
+}
+/* Intel 5000 series memory controllers and ports 2-7 */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25c0, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25d0, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25d4, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25d8, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e2, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e3, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e4, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e5, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e6, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e7, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25f7, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25f8, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25f9, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25fa, quirk_intel_mc_errata);
+/* Intel 5100 series memory controllers and ports 2-7 */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65c0, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e2, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e3, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e4, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e5, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e6, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e7, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f7, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f8, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f9, quirk_intel_mc_errata);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65fa, quirk_intel_mc_errata);
+
+
+/*
+ * Ivytown NTB BAR sizes are misreported by the hardware due to an erratum. To
+ * work around this, query the size it should be configured to by the device and
+ * modify the resource end to correspond to this new size.
+ */
+static void quirk_intel_ntb(struct pci_dev *dev)
+{
+ int rc;
+ u8 val;
+
+ rc = pci_read_config_byte(dev, 0x00D0, &val);
+ if (rc)
+ return;
+
+ dev->resource[2].end = dev->resource[2].start + ((u64) 1 << val) - 1;
+
+ rc = pci_read_config_byte(dev, 0x00D1, &val);
+ if (rc)
+ return;
+
+ dev->resource[4].end = dev->resource[4].start + ((u64) 1 << val) - 1;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e08, quirk_intel_ntb);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e0d, quirk_intel_ntb);
+
+static ktime_t fixup_debug_start(struct pci_dev *dev,
+ void (*fn)(struct pci_dev *dev))
+{
+ ktime_t calltime = ktime_set(0, 0);
+
+ dev_dbg(&dev->dev, "calling %pF\n", fn);
+ if (initcall_debug) {
+ pr_debug("calling %pF @ %i for %s\n",
+ fn, task_pid_nr(current), dev_name(&dev->dev));
+ calltime = ktime_get();
+ }
+
+ return calltime;
+}
+
+static void fixup_debug_report(struct pci_dev *dev, ktime_t calltime,
+ void (*fn)(struct pci_dev *dev))
+{
+ ktime_t delta, rettime;
+ unsigned long long duration;
+
+ if (initcall_debug) {
+ rettime = ktime_get();
+ delta = ktime_sub(rettime, calltime);
+ duration = (unsigned long long) ktime_to_ns(delta) >> 10;
+ pr_debug("pci fixup %pF returned after %lld usecs for %s\n",
+ fn, duration, dev_name(&dev->dev));
+ }
+}
+
+/*
+ * Some BIOS implementations leave the Intel GPU interrupts enabled,
+ * even though no one is handling them (f.e. i915 driver is never loaded).
+ * Additionally the interrupt destination is not set up properly
+ * and the interrupt ends up -somewhere-.
+ *
+ * These spurious interrupts are "sticky" and the kernel disables
+ * the (shared) interrupt line after 100.000+ generated interrupts.
+ *
+ * Fix it by disabling the still enabled interrupts.
+ * This resolves crashes often seen on monitor unplug.
+ */
+#define I915_DEIER_REG 0x4400c
+static void disable_igfx_irq(struct pci_dev *dev)
+{
+ void __iomem *regs = pci_iomap(dev, 0, 0);
+ if (regs == NULL) {
+ dev_warn(&dev->dev, "igfx quirk: Can't iomap PCI device\n");
+ return;
+ }
+
+ /* Check if any interrupt line is still enabled */
+ if (readl(regs + I915_DEIER_REG) != 0) {
+ dev_warn(&dev->dev, "BIOS left Intel GPU interrupts enabled; disabling\n");
+
+ writel(0, regs + I915_DEIER_REG);
+ }
+
+ pci_iounmap(dev, regs);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0102, disable_igfx_irq);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0152, disable_igfx_irq);
+
+/*
+ * PCI devices which are on Intel chips can skip the 10ms delay
+ * before entering D3 mode.
+ */
+static void quirk_remove_d3_delay(struct pci_dev *dev)
+{
+ dev->d3_delay = 0;
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0c00, quirk_remove_d3_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0412, quirk_remove_d3_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0c0c, quirk_remove_d3_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c31, quirk_remove_d3_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c3a, quirk_remove_d3_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c3d, quirk_remove_d3_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c2d, quirk_remove_d3_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c20, quirk_remove_d3_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c18, quirk_remove_d3_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c1c, quirk_remove_d3_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c26, quirk_remove_d3_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c4e, quirk_remove_d3_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c02, quirk_remove_d3_delay);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c22, quirk_remove_d3_delay);
+
+/*
+ * Some devices may pass our check in pci_intx_mask_supported if
+ * PCI_COMMAND_INTX_DISABLE works though they actually do not properly
+ * support this feature.
+ */
+static void quirk_broken_intx_masking(struct pci_dev *dev)
+{
+ dev->broken_intx_masking = 1;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CHELSIO, 0x0030,
+ quirk_broken_intx_masking);
+DECLARE_PCI_FIXUP_HEADER(0x1814, 0x0601, /* Ralink RT2800 802.11n PCI */
+ quirk_broken_intx_masking);
+/*
+ * Realtek RTL8169 PCI Gigabit Ethernet Controller (rev 10)
+ * Subsystem: Realtek RTL8169/8110 Family PCI Gigabit Ethernet NIC
+ *
+ * RTL8110SC - Fails under PCI device assignment using DisINTx masking.
+ */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_REALTEK, 0x8169,
+ quirk_broken_intx_masking);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MELLANOX, PCI_ANY_ID,
+ quirk_broken_intx_masking);
+
+static void quirk_no_bus_reset(struct pci_dev *dev)
+{
+ dev->dev_flags |= PCI_DEV_FLAGS_NO_BUS_RESET;
+}
+
+/*
+ * Atheros AR93xx chips do not behave after a bus reset. The device will
+ * throw a Link Down error on AER-capable systems and regardless of AER,
+ * config space of the device is never accessible again and typically
+ * causes the system to hang or reset when access is attempted.
+ * http://www.spinics.net/lists/linux-pci/msg34797.html
+ */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x0030, quirk_no_bus_reset);
+
+static void quirk_no_pm_reset(struct pci_dev *dev)
+{
+ /*
+ * We can't do a bus reset on root bus devices, but an ineffective
+ * PM reset may be better than nothing.
+ */
+ if (!pci_is_root_bus(dev->bus))
+ dev->dev_flags |= PCI_DEV_FLAGS_NO_PM_RESET;
+}
+
+/*
+ * Some AMD/ATI GPUS (HD8570 - Oland) report that a D3hot->D0 transition
+ * causes a reset (i.e., they advertise NoSoftRst-). This transition seems
+ * to have no effect on the device: it retains the framebuffer contents and
+ * monitor sync. Advertising this support makes other layers, like VFIO,
+ * assume pci_reset_function() is viable for this device. Mark it as
+ * unavailable to skip it when testing reset methods.
+ */
+DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_ATI, PCI_ANY_ID,
+ PCI_CLASS_DISPLAY_VGA, 8, quirk_no_pm_reset);
+
+#ifdef CONFIG_ACPI
+/*
+ * Apple: Shutdown Cactus Ridge Thunderbolt controller.
+ *
+ * On Apple hardware the Cactus Ridge Thunderbolt controller needs to be
+ * shutdown before suspend. Otherwise the native host interface (NHI) will not
+ * be present after resume if a device was plugged in before suspend.
+ *
+ * The thunderbolt controller consists of a pcie switch with downstream
+ * bridges leading to the NHI and to the tunnel pci bridges.
+ *
+ * This quirk cuts power to the whole chip. Therefore we have to apply it
+ * during suspend_noirq of the upstream bridge.
+ *
+ * Power is automagically restored before resume. No action is needed.
+ */
+static void quirk_apple_poweroff_thunderbolt(struct pci_dev *dev)
+{
+ acpi_handle bridge, SXIO, SXFP, SXLV;
+
+ if (!dmi_match(DMI_BOARD_VENDOR, "Apple Inc."))
+ return;
+ if (pci_pcie_type(dev) != PCI_EXP_TYPE_UPSTREAM)
+ return;
+ bridge = ACPI_HANDLE(&dev->dev);
+ if (!bridge)
+ return;
+ /*
+ * SXIO and SXLV are present only on machines requiring this quirk.
+ * TB bridges in external devices might have the same device id as those
+ * on the host, but they will not have the associated ACPI methods. This
+ * implicitly checks that we are at the right bridge.
+ */
+ if (ACPI_FAILURE(acpi_get_handle(bridge, "DSB0.NHI0.SXIO", &SXIO))
+ || ACPI_FAILURE(acpi_get_handle(bridge, "DSB0.NHI0.SXFP", &SXFP))
+ || ACPI_FAILURE(acpi_get_handle(bridge, "DSB0.NHI0.SXLV", &SXLV)))
+ return;
+ dev_info(&dev->dev, "quirk: cutting power to thunderbolt controller...\n");
+
+ /* magic sequence */
+ acpi_execute_simple_method(SXIO, NULL, 1);
+ acpi_execute_simple_method(SXFP, NULL, 0);
+ msleep(300);
+ acpi_execute_simple_method(SXLV, NULL, 0);
+ acpi_execute_simple_method(SXIO, NULL, 0);
+ acpi_execute_simple_method(SXLV, NULL, 0);
+}
+DECLARE_PCI_FIXUP_SUSPEND_LATE(PCI_VENDOR_ID_INTEL, 0x1547,
+ quirk_apple_poweroff_thunderbolt);
+
+/*
+ * Apple: Wait for the thunderbolt controller to reestablish pci tunnels.
+ *
+ * During suspend the thunderbolt controller is reset and all pci
+ * tunnels are lost. The NHI driver will try to reestablish all tunnels
+ * during resume. We have to manually wait for the NHI since there is
+ * no parent child relationship between the NHI and the tunneled
+ * bridges.
+ */
+static void quirk_apple_wait_for_thunderbolt(struct pci_dev *dev)
+{
+ struct pci_dev *sibling = NULL;
+ struct pci_dev *nhi = NULL;
+
+ if (!dmi_match(DMI_BOARD_VENDOR, "Apple Inc."))
+ return;
+ if (pci_pcie_type(dev) != PCI_EXP_TYPE_DOWNSTREAM)
+ return;
+ /*
+ * Find the NHI and confirm that we are a bridge on the tb host
+ * controller and not on a tb endpoint.
+ */
+ sibling = pci_get_slot(dev->bus, 0x0);
+ if (sibling == dev)
+ goto out; /* we are the downstream bridge to the NHI */
+ if (!sibling || !sibling->subordinate)
+ goto out;
+ nhi = pci_get_slot(sibling->subordinate, 0x0);
+ if (!nhi)
+ goto out;
+ if (nhi->vendor != PCI_VENDOR_ID_INTEL
+ || (nhi->device != 0x1547 && nhi->device != 0x156c)
+ || nhi->subsystem_vendor != 0x2222
+ || nhi->subsystem_device != 0x1111)
+ goto out;
+ dev_info(&dev->dev, "quirk: waiting for thunderbolt to reestablish PCI tunnels...\n");
+ device_pm_wait_for_dev(&dev->dev, &nhi->dev);
+out:
+ pci_dev_put(nhi);
+ pci_dev_put(sibling);
+}
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, 0x1547,
+ quirk_apple_wait_for_thunderbolt);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, 0x156d,
+ quirk_apple_wait_for_thunderbolt);
+#endif
+
+static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f,
+ struct pci_fixup *end)
+{
+ ktime_t calltime;
+
+ for (; f < end; f++)
+ if ((f->class == (u32) (dev->class >> f->class_shift) ||
+ f->class == (u32) PCI_ANY_ID) &&
+ (f->vendor == dev->vendor ||
+ f->vendor == (u16) PCI_ANY_ID) &&
+ (f->device == dev->device ||
+ f->device == (u16) PCI_ANY_ID)) {
+ calltime = fixup_debug_start(dev, f->hook);
+ f->hook(dev);
+ fixup_debug_report(dev, calltime, f->hook);
+ }
+}
+
+extern struct pci_fixup __start_pci_fixups_early[];
+extern struct pci_fixup __end_pci_fixups_early[];
+extern struct pci_fixup __start_pci_fixups_header[];
+extern struct pci_fixup __end_pci_fixups_header[];
+extern struct pci_fixup __start_pci_fixups_final[];
+extern struct pci_fixup __end_pci_fixups_final[];
+extern struct pci_fixup __start_pci_fixups_enable[];
+extern struct pci_fixup __end_pci_fixups_enable[];
+extern struct pci_fixup __start_pci_fixups_resume[];
+extern struct pci_fixup __end_pci_fixups_resume[];
+extern struct pci_fixup __start_pci_fixups_resume_early[];
+extern struct pci_fixup __end_pci_fixups_resume_early[];
+extern struct pci_fixup __start_pci_fixups_suspend[];
+extern struct pci_fixup __end_pci_fixups_suspend[];
+extern struct pci_fixup __start_pci_fixups_suspend_late[];
+extern struct pci_fixup __end_pci_fixups_suspend_late[];
+
+static bool pci_apply_fixup_final_quirks;
+
+void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev)
+{
+ struct pci_fixup *start, *end;
+
+ switch (pass) {
+ case pci_fixup_early:
+ start = __start_pci_fixups_early;
+ end = __end_pci_fixups_early;
+ break;
+
+ case pci_fixup_header:
+ start = __start_pci_fixups_header;
+ end = __end_pci_fixups_header;
+ break;
+
+ case pci_fixup_final:
+ if (!pci_apply_fixup_final_quirks)
+ return;
+ start = __start_pci_fixups_final;
+ end = __end_pci_fixups_final;
+ break;
+
+ case pci_fixup_enable:
+ start = __start_pci_fixups_enable;
+ end = __end_pci_fixups_enable;
+ break;
+
+ case pci_fixup_resume:
+ start = __start_pci_fixups_resume;
+ end = __end_pci_fixups_resume;
+ break;
+
+ case pci_fixup_resume_early:
+ start = __start_pci_fixups_resume_early;
+ end = __end_pci_fixups_resume_early;
+ break;
+
+ case pci_fixup_suspend:
+ start = __start_pci_fixups_suspend;
+ end = __end_pci_fixups_suspend;
+ break;
+
+ case pci_fixup_suspend_late:
+ start = __start_pci_fixups_suspend_late;
+ end = __end_pci_fixups_suspend_late;
+ break;
+
+ default:
+ /* stupid compiler warning, you would think with an enum... */
+ return;
+ }
+ pci_do_fixups(dev, start, end);
+}
+EXPORT_SYMBOL(pci_fixup_device);
+
+
+static int __init pci_apply_final_quirks(void)
+{
+ struct pci_dev *dev = NULL;
+ u8 cls = 0;
+ u8 tmp;
+
+ if (pci_cache_line_size)
+ printk(KERN_DEBUG "PCI: CLS %u bytes\n",
+ pci_cache_line_size << 2);
+
+ pci_apply_fixup_final_quirks = true;
+ for_each_pci_dev(dev) {
+ pci_fixup_device(pci_fixup_final, dev);
+ /*
+ * If arch hasn't set it explicitly yet, use the CLS
+ * value shared by all PCI devices. If there's a
+ * mismatch, fall back to the default value.
+ */
+ if (!pci_cache_line_size) {
+ pci_read_config_byte(dev, PCI_CACHE_LINE_SIZE, &tmp);
+ if (!cls)
+ cls = tmp;
+ if (!tmp || cls == tmp)
+ continue;
+
+ printk(KERN_DEBUG "PCI: CLS mismatch (%u != %u), using %u bytes\n",
+ cls << 2, tmp << 2,
+ pci_dfl_cache_line_size << 2);
+ pci_cache_line_size = pci_dfl_cache_line_size;
+ }
+ }
+
+ if (!pci_cache_line_size) {
+ printk(KERN_DEBUG "PCI: CLS %u bytes, default %u\n",
+ cls << 2, pci_dfl_cache_line_size << 2);
+ pci_cache_line_size = cls ? cls : pci_dfl_cache_line_size;
+ }
+
+ return 0;
+}
+
+fs_initcall_sync(pci_apply_final_quirks);
+
+/*
+ * Followings are device-specific reset methods which can be used to
+ * reset a single function if other methods (e.g. FLR, PM D0->D3) are
+ * not available.
+ */
+static int reset_intel_generic_dev(struct pci_dev *dev, int probe)
+{
+ int pos;
+
+ /* only implement PCI_CLASS_SERIAL_USB at present */
+ if (dev->class == PCI_CLASS_SERIAL_USB) {
+ pos = pci_find_capability(dev, PCI_CAP_ID_VNDR);
+ if (!pos)
+ return -ENOTTY;
+
+ if (probe)
+ return 0;
+
+ pci_write_config_byte(dev, pos + 0x4, 1);
+ msleep(100);
+
+ return 0;
+ } else {
+ return -ENOTTY;
+ }
+}
+
+static int reset_intel_82599_sfp_virtfn(struct pci_dev *dev, int probe)
+{
+ /*
+ * http://www.intel.com/content/dam/doc/datasheet/82599-10-gbe-controller-datasheet.pdf
+ *
+ * The 82599 supports FLR on VFs, but FLR support is reported only
+ * in the PF DEVCAP (sec 9.3.10.4), not in the VF DEVCAP (sec 9.5).
+ * Therefore, we can't use pcie_flr(), which checks the VF DEVCAP.
+ */
+
+ if (probe)
+ return 0;
+
+ if (!pci_wait_for_pending_transaction(dev))
+ dev_err(&dev->dev, "transaction is not cleared; proceeding with reset anyway\n");
+
+ pcie_capability_set_word(dev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_BCR_FLR);
+
+ msleep(100);
+
+ return 0;
+}
+
+#include "../gpu/drm/i915/i915_reg.h"
+#define MSG_CTL 0x45010
+#define NSDE_PWR_STATE 0xd0100
+#define IGD_OPERATION_TIMEOUT 10000 /* set timeout 10 seconds */
+
+static int reset_ivb_igd(struct pci_dev *dev, int probe)
+{
+ void __iomem *mmio_base;
+ unsigned long timeout;
+ u32 val;
+
+ if (probe)
+ return 0;
+
+ mmio_base = pci_iomap(dev, 0, 0);
+ if (!mmio_base)
+ return -ENOMEM;
+
+ iowrite32(0x00000002, mmio_base + MSG_CTL);
+
+ /*
+ * Clobbering SOUTH_CHICKEN2 register is fine only if the next
+ * driver loaded sets the right bits. However, this's a reset and
+ * the bits have been set by i915 previously, so we clobber
+ * SOUTH_CHICKEN2 register directly here.
+ */
+ iowrite32(0x00000005, mmio_base + SOUTH_CHICKEN2);
+
+ val = ioread32(mmio_base + PCH_PP_CONTROL) & 0xfffffffe;
+ iowrite32(val, mmio_base + PCH_PP_CONTROL);
+
+ timeout = jiffies + msecs_to_jiffies(IGD_OPERATION_TIMEOUT);
+ do {
+ val = ioread32(mmio_base + PCH_PP_STATUS);
+ if ((val & 0xb0000000) == 0)
+ goto reset_complete;
+ msleep(10);
+ } while (time_before(jiffies, timeout));
+ dev_warn(&dev->dev, "timeout during reset\n");
+
+reset_complete:
+ iowrite32(0x00000002, mmio_base + NSDE_PWR_STATE);
+
+ pci_iounmap(dev, mmio_base);
+ return 0;
+}
+
+/*
+ * Device-specific reset method for Chelsio T4-based adapters.
+ */
+static int reset_chelsio_generic_dev(struct pci_dev *dev, int probe)
+{
+ u16 old_command;
+ u16 msix_flags;
+
+ /*
+ * If this isn't a Chelsio T4-based device, return -ENOTTY indicating
+ * that we have no device-specific reset method.
+ */
+ if ((dev->device & 0xf000) != 0x4000)
+ return -ENOTTY;
+
+ /*
+ * If this is the "probe" phase, return 0 indicating that we can
+ * reset this device.
+ */
+ if (probe)
+ return 0;
+
+ /*
+ * T4 can wedge if there are DMAs in flight within the chip and Bus
+ * Master has been disabled. We need to have it on till the Function
+ * Level Reset completes. (BUS_MASTER is disabled in
+ * pci_reset_function()).
+ */
+ pci_read_config_word(dev, PCI_COMMAND, &old_command);
+ pci_write_config_word(dev, PCI_COMMAND,
+ old_command | PCI_COMMAND_MASTER);
+
+ /*
+ * Perform the actual device function reset, saving and restoring
+ * configuration information around the reset.
+ */
+ pci_save_state(dev);
+
+ /*
+ * T4 also suffers a Head-Of-Line blocking problem if MSI-X interrupts
+ * are disabled when an MSI-X interrupt message needs to be delivered.
+ * So we briefly re-enable MSI-X interrupts for the duration of the
+ * FLR. The pci_restore_state() below will restore the original
+ * MSI-X state.
+ */
+ pci_read_config_word(dev, dev->msix_cap+PCI_MSIX_FLAGS, &msix_flags);
+ if ((msix_flags & PCI_MSIX_FLAGS_ENABLE) == 0)
+ pci_write_config_word(dev, dev->msix_cap+PCI_MSIX_FLAGS,
+ msix_flags |
+ PCI_MSIX_FLAGS_ENABLE |
+ PCI_MSIX_FLAGS_MASKALL);
+
+ /*
+ * Start of pcie_flr() code sequence. This reset code is a copy of
+ * the guts of pcie_flr() because that's not an exported function.
+ */
+
+ if (!pci_wait_for_pending_transaction(dev))
+ dev_err(&dev->dev, "transaction is not cleared; proceeding with reset anyway\n");
+
+ pcie_capability_set_word(dev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_BCR_FLR);
+ msleep(100);
+
+ /*
+ * End of pcie_flr() code sequence.
+ */
+
+ /*
+ * Restore the configuration information (BAR values, etc.) including
+ * the original PCI Configuration Space Command word, and return
+ * success.
+ */
+ pci_restore_state(dev);
+ pci_write_config_word(dev, PCI_COMMAND, old_command);
+ return 0;
+}
+
+#define PCI_DEVICE_ID_INTEL_82599_SFP_VF 0x10ed
+#define PCI_DEVICE_ID_INTEL_IVB_M_VGA 0x0156
+#define PCI_DEVICE_ID_INTEL_IVB_M2_VGA 0x0166
+
+static const struct pci_dev_reset_methods pci_dev_reset_methods[] = {
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82599_SFP_VF,
+ reset_intel_82599_sfp_virtfn },
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IVB_M_VGA,
+ reset_ivb_igd },
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IVB_M2_VGA,
+ reset_ivb_igd },
+ { PCI_VENDOR_ID_INTEL, PCI_ANY_ID,
+ reset_intel_generic_dev },
+ { PCI_VENDOR_ID_CHELSIO, PCI_ANY_ID,
+ reset_chelsio_generic_dev },
+ { 0 }
+};
+
+/*
+ * These device-specific reset methods are here rather than in a driver
+ * because when a host assigns a device to a guest VM, the host may need
+ * to reset the device but probably doesn't have a driver for it.
+ */
+int pci_dev_specific_reset(struct pci_dev *dev, int probe)
+{
+ const struct pci_dev_reset_methods *i;
+
+ for (i = pci_dev_reset_methods; i->reset; i++) {
+ if ((i->vendor == dev->vendor ||
+ i->vendor == (u16)PCI_ANY_ID) &&
+ (i->device == dev->device ||
+ i->device == (u16)PCI_ANY_ID))
+ return i->reset(dev, probe);
+ }
+
+ return -ENOTTY;
+}
+
+static void quirk_dma_func0_alias(struct pci_dev *dev)
+{
+ if (PCI_FUNC(dev->devfn) != 0) {
+ dev->dma_alias_devfn = PCI_DEVFN(PCI_SLOT(dev->devfn), 0);
+ dev->dev_flags |= PCI_DEV_FLAGS_DMA_ALIAS_DEVFN;
+ }
+}
+
+/*
+ * https://bugzilla.redhat.com/show_bug.cgi?id=605888
+ *
+ * Some Ricoh devices use function 0 as the PCIe requester ID for DMA.
+ */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_RICOH, 0xe832, quirk_dma_func0_alias);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_RICOH, 0xe476, quirk_dma_func0_alias);
+
+static void quirk_dma_func1_alias(struct pci_dev *dev)
+{
+ if (PCI_FUNC(dev->devfn) != 1) {
+ dev->dma_alias_devfn = PCI_DEVFN(PCI_SLOT(dev->devfn), 1);
+ dev->dev_flags |= PCI_DEV_FLAGS_DMA_ALIAS_DEVFN;
+ }
+}
+
+/*
+ * Marvell 88SE9123 uses function 1 as the requester ID for DMA. In some
+ * SKUs function 1 is present and is a legacy IDE controller, in other
+ * SKUs this function is not present, making this a ghost requester.
+ * https://bugzilla.kernel.org/show_bug.cgi?id=42679
+ */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9123,
+ quirk_dma_func1_alias);
+/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c14 */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9130,
+ quirk_dma_func1_alias);
+/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c47 + c57 */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9172,
+ quirk_dma_func1_alias);
+/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c59 */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x917a,
+ quirk_dma_func1_alias);
+/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c46 */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x91a0,
+ quirk_dma_func1_alias);
+/* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c49 */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9230,
+ quirk_dma_func1_alias);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TTI, 0x0642,
+ quirk_dma_func1_alias);
+/* https://bugs.gentoo.org/show_bug.cgi?id=497630 */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_JMICRON,
+ PCI_DEVICE_ID_JMICRON_JMB388_ESD,
+ quirk_dma_func1_alias);
+
+/*
+ * Some devices DMA with the wrong devfn, not just the wrong function.
+ * quirk_fixed_dma_alias() uses this table to create fixed aliases, where
+ * the alias is "fixed" and independent of the device devfn.
+ *
+ * For example, the Adaptec 3405 is a PCIe card with an Intel 80333 I/O
+ * processor. To software, this appears as a PCIe-to-PCI/X bridge with a
+ * single device on the secondary bus. In reality, the single exposed
+ * device at 0e.0 is the Address Translation Unit (ATU) of the controller
+ * that provides a bridge to the internal bus of the I/O processor. The
+ * controller supports private devices, which can be hidden from PCI config
+ * space. In the case of the Adaptec 3405, a private device at 01.0
+ * appears to be the DMA engine, which therefore needs to become a DMA
+ * alias for the device.
+ */
+static const struct pci_device_id fixed_dma_alias_tbl[] = {
+ { PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x0285,
+ PCI_VENDOR_ID_ADAPTEC2, 0x02bb), /* Adaptec 3405 */
+ .driver_data = PCI_DEVFN(1, 0) },
+ { 0 }
+};
+
+static void quirk_fixed_dma_alias(struct pci_dev *dev)
+{
+ const struct pci_device_id *id;
+
+ id = pci_match_id(fixed_dma_alias_tbl, dev);
+ if (id) {
+ dev->dma_alias_devfn = id->driver_data;
+ dev->dev_flags |= PCI_DEV_FLAGS_DMA_ALIAS_DEVFN;
+ dev_info(&dev->dev, "Enabling fixed DMA alias to %02x.%d\n",
+ PCI_SLOT(dev->dma_alias_devfn),
+ PCI_FUNC(dev->dma_alias_devfn));
+ }
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ADAPTEC2, 0x0285, quirk_fixed_dma_alias);
+
+/*
+ * A few PCIe-to-PCI bridges fail to expose a PCIe capability, resulting in
+ * using the wrong DMA alias for the device. Some of these devices can be
+ * used as either forward or reverse bridges, so we need to test whether the
+ * device is operating in the correct mode. We could probably apply this
+ * quirk to PCI_ANY_ID, but for now we'll just use known offenders. The test
+ * is for a non-root, non-PCIe bridge where the upstream device is PCIe and
+ * is not a PCIe-to-PCI bridge, then @pdev is actually a PCIe-to-PCI bridge.
+ */
+static void quirk_use_pcie_bridge_dma_alias(struct pci_dev *pdev)
+{
+ if (!pci_is_root_bus(pdev->bus) &&
+ pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE &&
+ !pci_is_pcie(pdev) && pci_is_pcie(pdev->bus->self) &&
+ pci_pcie_type(pdev->bus->self) != PCI_EXP_TYPE_PCI_BRIDGE)
+ pdev->dev_flags |= PCI_DEV_FLAG_PCIE_BRIDGE_ALIAS;
+}
+/* ASM1083/1085, https://bugzilla.kernel.org/show_bug.cgi?id=44881#c46 */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ASMEDIA, 0x1080,
+ quirk_use_pcie_bridge_dma_alias);
+/* Tundra 8113, https://bugzilla.kernel.org/show_bug.cgi?id=44881#c43 */
+DECLARE_PCI_FIXUP_HEADER(0x10e3, 0x8113, quirk_use_pcie_bridge_dma_alias);
+/* ITE 8892, https://bugzilla.kernel.org/show_bug.cgi?id=73551 */
+DECLARE_PCI_FIXUP_HEADER(0x1283, 0x8892, quirk_use_pcie_bridge_dma_alias);
+/* Intel 82801, https://bugzilla.kernel.org/show_bug.cgi?id=44881#c49 */
+DECLARE_PCI_FIXUP_HEADER(0x8086, 0x244e, quirk_use_pcie_bridge_dma_alias);
+
+/*
+ * AMD has indicated that the devices below do not support peer-to-peer
+ * in any system where they are found in the southbridge with an AMD
+ * IOMMU in the system. Multifunction devices that do not support
+ * peer-to-peer between functions can claim to support a subset of ACS.
+ * Such devices effectively enable request redirect (RR) and completion
+ * redirect (CR) since all transactions are redirected to the upstream
+ * root complex.
+ *
+ * http://permalink.gmane.org/gmane.comp.emulators.kvm.devel/94086
+ * http://permalink.gmane.org/gmane.comp.emulators.kvm.devel/94102
+ * http://permalink.gmane.org/gmane.comp.emulators.kvm.devel/99402
+ *
+ * 1002:4385 SBx00 SMBus Controller
+ * 1002:439c SB7x0/SB8x0/SB9x0 IDE Controller
+ * 1002:4383 SBx00 Azalia (Intel HDA)
+ * 1002:439d SB7x0/SB8x0/SB9x0 LPC host controller
+ * 1002:4384 SBx00 PCI to PCI Bridge
+ * 1002:4399 SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
+ *
+ * https://bugzilla.kernel.org/show_bug.cgi?id=81841#c15
+ *
+ * 1022:780f [AMD] FCH PCI Bridge
+ * 1022:7809 [AMD] FCH USB OHCI Controller
+ */
+static int pci_quirk_amd_sb_acs(struct pci_dev *dev, u16 acs_flags)
+{
+#ifdef CONFIG_ACPI
+ struct acpi_table_header *header = NULL;
+ acpi_status status;
+
+ /* Targeting multifunction devices on the SB (appears on root bus) */
+ if (!dev->multifunction || !pci_is_root_bus(dev->bus))
+ return -ENODEV;
+
+ /* The IVRS table describes the AMD IOMMU */
+ status = acpi_get_table("IVRS", 0, &header);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+
+ /* Filter out flags not applicable to multifunction */
+ acs_flags &= (PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_EC | PCI_ACS_DT);
+
+ return acs_flags & ~(PCI_ACS_RR | PCI_ACS_CR) ? 0 : 1;
+#else
+ return -ENODEV;
+#endif
+}
+
+/*
+ * Many Intel PCH root ports do provide ACS-like features to disable peer
+ * transactions and validate bus numbers in requests, but do not provide an
+ * actual PCIe ACS capability. This is the list of device IDs known to fall
+ * into that category as provided by Intel in Red Hat bugzilla 1037684.
+ */
+static const u16 pci_quirk_intel_pch_acs_ids[] = {
+ /* Ibexpeak PCH */
+ 0x3b42, 0x3b43, 0x3b44, 0x3b45, 0x3b46, 0x3b47, 0x3b48, 0x3b49,
+ 0x3b4a, 0x3b4b, 0x3b4c, 0x3b4d, 0x3b4e, 0x3b4f, 0x3b50, 0x3b51,
+ /* Cougarpoint PCH */
+ 0x1c10, 0x1c11, 0x1c12, 0x1c13, 0x1c14, 0x1c15, 0x1c16, 0x1c17,
+ 0x1c18, 0x1c19, 0x1c1a, 0x1c1b, 0x1c1c, 0x1c1d, 0x1c1e, 0x1c1f,
+ /* Pantherpoint PCH */
+ 0x1e10, 0x1e11, 0x1e12, 0x1e13, 0x1e14, 0x1e15, 0x1e16, 0x1e17,
+ 0x1e18, 0x1e19, 0x1e1a, 0x1e1b, 0x1e1c, 0x1e1d, 0x1e1e, 0x1e1f,
+ /* Lynxpoint-H PCH */
+ 0x8c10, 0x8c11, 0x8c12, 0x8c13, 0x8c14, 0x8c15, 0x8c16, 0x8c17,
+ 0x8c18, 0x8c19, 0x8c1a, 0x8c1b, 0x8c1c, 0x8c1d, 0x8c1e, 0x8c1f,
+ /* Lynxpoint-LP PCH */
+ 0x9c10, 0x9c11, 0x9c12, 0x9c13, 0x9c14, 0x9c15, 0x9c16, 0x9c17,
+ 0x9c18, 0x9c19, 0x9c1a, 0x9c1b,
+ /* Wildcat PCH */
+ 0x9c90, 0x9c91, 0x9c92, 0x9c93, 0x9c94, 0x9c95, 0x9c96, 0x9c97,
+ 0x9c98, 0x9c99, 0x9c9a, 0x9c9b,
+ /* Patsburg (X79) PCH */
+ 0x1d10, 0x1d12, 0x1d14, 0x1d16, 0x1d18, 0x1d1a, 0x1d1c, 0x1d1e,
+ /* Wellsburg (X99) PCH */
+ 0x8d10, 0x8d11, 0x8d12, 0x8d13, 0x8d14, 0x8d15, 0x8d16, 0x8d17,
+ 0x8d18, 0x8d19, 0x8d1a, 0x8d1b, 0x8d1c, 0x8d1d, 0x8d1e,
+};
+
+static bool pci_quirk_intel_pch_acs_match(struct pci_dev *dev)
+{
+ int i;
+
+ /* Filter out a few obvious non-matches first */
+ if (!pci_is_pcie(dev) || pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT)
+ return false;
+
+ for (i = 0; i < ARRAY_SIZE(pci_quirk_intel_pch_acs_ids); i++)
+ if (pci_quirk_intel_pch_acs_ids[i] == dev->device)
+ return true;
+
+ return false;
+}
+
+#define INTEL_PCH_ACS_FLAGS (PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF | PCI_ACS_SV)
+
+static int pci_quirk_intel_pch_acs(struct pci_dev *dev, u16 acs_flags)
+{
+ u16 flags = dev->dev_flags & PCI_DEV_FLAGS_ACS_ENABLED_QUIRK ?
+ INTEL_PCH_ACS_FLAGS : 0;
+
+ if (!pci_quirk_intel_pch_acs_match(dev))
+ return -ENOTTY;
+
+ return acs_flags & ~flags ? 0 : 1;
+}
+
+static int pci_quirk_mf_endpoint_acs(struct pci_dev *dev, u16 acs_flags)
+{
+ /*
+ * SV, TB, and UF are not relevant to multifunction endpoints.
+ *
+ * Multifunction devices are only required to implement RR, CR, and DT
+ * in their ACS capability if they support peer-to-peer transactions.
+ * Devices matching this quirk have been verified by the vendor to not
+ * perform peer-to-peer with other functions, allowing us to mask out
+ * these bits as if they were unimplemented in the ACS capability.
+ */
+ acs_flags &= ~(PCI_ACS_SV | PCI_ACS_TB | PCI_ACS_RR |
+ PCI_ACS_CR | PCI_ACS_UF | PCI_ACS_DT);
+
+ return acs_flags ? 0 : 1;
+}
+
+static const struct pci_dev_acs_enabled {
+ u16 vendor;
+ u16 device;
+ int (*acs_enabled)(struct pci_dev *dev, u16 acs_flags);
+} pci_dev_acs_enabled[] = {
+ { PCI_VENDOR_ID_ATI, 0x4385, pci_quirk_amd_sb_acs },
+ { PCI_VENDOR_ID_ATI, 0x439c, pci_quirk_amd_sb_acs },
+ { PCI_VENDOR_ID_ATI, 0x4383, pci_quirk_amd_sb_acs },
+ { PCI_VENDOR_ID_ATI, 0x439d, pci_quirk_amd_sb_acs },
+ { PCI_VENDOR_ID_ATI, 0x4384, pci_quirk_amd_sb_acs },
+ { PCI_VENDOR_ID_ATI, 0x4399, pci_quirk_amd_sb_acs },
+ { PCI_VENDOR_ID_AMD, 0x780f, pci_quirk_amd_sb_acs },
+ { PCI_VENDOR_ID_AMD, 0x7809, pci_quirk_amd_sb_acs },
+ { PCI_VENDOR_ID_SOLARFLARE, 0x0903, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_SOLARFLARE, 0x0923, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x10C6, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x10DB, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x10DD, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x10E1, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x10F1, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x10F7, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x10F8, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x10F9, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x10FA, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x10FB, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x10FC, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x1507, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x1514, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x151C, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x1529, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x152A, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x154D, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x154F, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x1551, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x1558, pci_quirk_mf_endpoint_acs },
+ /* 82580 */
+ { PCI_VENDOR_ID_INTEL, 0x1509, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x150E, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x150F, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x1510, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x1511, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x1516, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x1527, pci_quirk_mf_endpoint_acs },
+ /* 82576 */
+ { PCI_VENDOR_ID_INTEL, 0x10C9, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x10E6, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x10E7, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x10E8, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x150A, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x150D, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x1518, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x1526, pci_quirk_mf_endpoint_acs },
+ /* 82575 */
+ { PCI_VENDOR_ID_INTEL, 0x10A7, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x10A9, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x10D6, pci_quirk_mf_endpoint_acs },
+ /* I350 */
+ { PCI_VENDOR_ID_INTEL, 0x1521, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x1522, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x1523, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x1524, pci_quirk_mf_endpoint_acs },
+ /* 82571 (Quads omitted due to non-ACS switch) */
+ { PCI_VENDOR_ID_INTEL, 0x105E, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x105F, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x1060, pci_quirk_mf_endpoint_acs },
+ { PCI_VENDOR_ID_INTEL, 0x10D9, pci_quirk_mf_endpoint_acs },
+ /* Intel PCH root ports */
+ { PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_quirk_intel_pch_acs },
+ { 0x19a2, 0x710, pci_quirk_mf_endpoint_acs }, /* Emulex BE3-R */
+ { 0x10df, 0x720, pci_quirk_mf_endpoint_acs }, /* Emulex Skyhawk-R */
+ { 0 }
+};
+
+int pci_dev_specific_acs_enabled(struct pci_dev *dev, u16 acs_flags)
+{
+ const struct pci_dev_acs_enabled *i;
+ int ret;
+
+ /*
+ * Allow devices that do not expose standard PCIe ACS capabilities
+ * or control to indicate their support here. Multi-function express
+ * devices which do not allow internal peer-to-peer between functions,
+ * but do not implement PCIe ACS may wish to return true here.
+ */
+ for (i = pci_dev_acs_enabled; i->acs_enabled; i++) {
+ if ((i->vendor == dev->vendor ||
+ i->vendor == (u16)PCI_ANY_ID) &&
+ (i->device == dev->device ||
+ i->device == (u16)PCI_ANY_ID)) {
+ ret = i->acs_enabled(dev, acs_flags);
+ if (ret >= 0)
+ return ret;
+ }
+ }
+
+ return -ENOTTY;
+}
+
+/* Config space offset of Root Complex Base Address register */
+#define INTEL_LPC_RCBA_REG 0xf0
+/* 31:14 RCBA address */
+#define INTEL_LPC_RCBA_MASK 0xffffc000
+/* RCBA Enable */
+#define INTEL_LPC_RCBA_ENABLE (1 << 0)
+
+/* Backbone Scratch Pad Register */
+#define INTEL_BSPR_REG 0x1104
+/* Backbone Peer Non-Posted Disable */
+#define INTEL_BSPR_REG_BPNPD (1 << 8)
+/* Backbone Peer Posted Disable */
+#define INTEL_BSPR_REG_BPPD (1 << 9)
+
+/* Upstream Peer Decode Configuration Register */
+#define INTEL_UPDCR_REG 0x1114
+/* 5:0 Peer Decode Enable bits */
+#define INTEL_UPDCR_REG_MASK 0x3f
+
+static int pci_quirk_enable_intel_lpc_acs(struct pci_dev *dev)
+{
+ u32 rcba, bspr, updcr;
+ void __iomem *rcba_mem;
+
+ /*
+ * Read the RCBA register from the LPC (D31:F0). PCH root ports
+ * are D28:F* and therefore get probed before LPC, thus we can't
+ * use pci_get_slot/pci_read_config_dword here.
+ */
+ pci_bus_read_config_dword(dev->bus, PCI_DEVFN(31, 0),
+ INTEL_LPC_RCBA_REG, &rcba);
+ if (!(rcba & INTEL_LPC_RCBA_ENABLE))
+ return -EINVAL;
+
+ rcba_mem = ioremap_nocache(rcba & INTEL_LPC_RCBA_MASK,
+ PAGE_ALIGN(INTEL_UPDCR_REG));
+ if (!rcba_mem)
+ return -ENOMEM;
+
+ /*
+ * The BSPR can disallow peer cycles, but it's set by soft strap and
+ * therefore read-only. If both posted and non-posted peer cycles are
+ * disallowed, we're ok. If either are allowed, then we need to use
+ * the UPDCR to disable peer decodes for each port. This provides the
+ * PCIe ACS equivalent of PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF
+ */
+ bspr = readl(rcba_mem + INTEL_BSPR_REG);
+ bspr &= INTEL_BSPR_REG_BPNPD | INTEL_BSPR_REG_BPPD;
+ if (bspr != (INTEL_BSPR_REG_BPNPD | INTEL_BSPR_REG_BPPD)) {
+ updcr = readl(rcba_mem + INTEL_UPDCR_REG);
+ if (updcr & INTEL_UPDCR_REG_MASK) {
+ dev_info(&dev->dev, "Disabling UPDCR peer decodes\n");
+ updcr &= ~INTEL_UPDCR_REG_MASK;
+ writel(updcr, rcba_mem + INTEL_UPDCR_REG);
+ }
+ }
+
+ iounmap(rcba_mem);
+ return 0;
+}
+
+/* Miscellaneous Port Configuration register */
+#define INTEL_MPC_REG 0xd8
+/* MPC: Invalid Receive Bus Number Check Enable */
+#define INTEL_MPC_REG_IRBNCE (1 << 26)
+
+static void pci_quirk_enable_intel_rp_mpc_acs(struct pci_dev *dev)
+{
+ u32 mpc;
+
+ /*
+ * When enabled, the IRBNCE bit of the MPC register enables the
+ * equivalent of PCI ACS Source Validation (PCI_ACS_SV), which
+ * ensures that requester IDs fall within the bus number range
+ * of the bridge. Enable if not already.
+ */
+ pci_read_config_dword(dev, INTEL_MPC_REG, &mpc);
+ if (!(mpc & INTEL_MPC_REG_IRBNCE)) {
+ dev_info(&dev->dev, "Enabling MPC IRBNCE\n");
+ mpc |= INTEL_MPC_REG_IRBNCE;
+ pci_write_config_word(dev, INTEL_MPC_REG, mpc);
+ }
+}
+
+static int pci_quirk_enable_intel_pch_acs(struct pci_dev *dev)
+{
+ if (!pci_quirk_intel_pch_acs_match(dev))
+ return -ENOTTY;
+
+ if (pci_quirk_enable_intel_lpc_acs(dev)) {
+ dev_warn(&dev->dev, "Failed to enable Intel PCH ACS quirk\n");
+ return 0;
+ }
+
+ pci_quirk_enable_intel_rp_mpc_acs(dev);
+
+ dev->dev_flags |= PCI_DEV_FLAGS_ACS_ENABLED_QUIRK;
+
+ dev_info(&dev->dev, "Intel PCH root port ACS workaround enabled\n");
+
+ return 0;
+}
+
+static const struct pci_dev_enable_acs {
+ u16 vendor;
+ u16 device;
+ int (*enable_acs)(struct pci_dev *dev);
+} pci_dev_enable_acs[] = {
+ { PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_quirk_enable_intel_pch_acs },
+ { 0 }
+};
+
+void pci_dev_specific_enable_acs(struct pci_dev *dev)
+{
+ const struct pci_dev_enable_acs *i;
+ int ret;
+
+ for (i = pci_dev_enable_acs; i->enable_acs; i++) {
+ if ((i->vendor == dev->vendor ||
+ i->vendor == (u16)PCI_ANY_ID) &&
+ (i->device == dev->device ||
+ i->device == (u16)PCI_ANY_ID)) {
+ ret = i->enable_acs(dev);
+ if (ret >= 0)
+ return;
+ }
+ }
+}