1 files changed, 730 insertions, 0 deletions

diff --git a/kernel/drivers/pci/hotplug/shpchp_ctrl.c b/kernel/drivers/pci/hotplug/shpchp_ctrl.c
new file mode 100644
index 000000000..10c792759
--- /dev/null
+++ b/kernel/drivers/pci/hotplug/shpchp_ctrl.c
@@ -0,0 +1,730 @@
+/*
+ * Standard Hot Plug Controller Driver
+ *
+ * Copyright (C) 1995,2001 Compaq Computer Corporation
+ * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
+ * Copyright (C) 2001 IBM Corp.
+ * Copyright (C) 2003-2004 Intel Corporation
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include "../pci.h"
+#include "shpchp.h"
+
+static void interrupt_event_handler(struct work_struct *work);
+static int shpchp_enable_slot(struct slot *p_slot);
+static int shpchp_disable_slot(struct slot *p_slot);
+
+static int queue_interrupt_event(struct slot *p_slot, u32 event_type)
+{
+	struct event_info *info;
+
+	info = kmalloc(sizeof(*info), GFP_ATOMIC);
+	if (!info)
+		return -ENOMEM;
+
+	info->event_type = event_type;
+	info->p_slot = p_slot;
+	INIT_WORK(&info->work, interrupt_event_handler);
+
+	queue_work(p_slot->wq, &info->work);
+
+	return 0;
+}
+
+u8 shpchp_handle_attention_button(u8 hp_slot, struct controller *ctrl)
+{
+	struct slot *p_slot;
+	u32 event_type;
+
+	/* Attention Button Change */
+	ctrl_dbg(ctrl, "Attention button interrupt received\n");
+
+	p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
+	p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save));
+
+	/*
+	 *  Button pressed - See if need to TAKE ACTION!!!
+	 */
+	ctrl_info(ctrl, "Button pressed on Slot(%s)\n", slot_name(p_slot));
+	event_type = INT_BUTTON_PRESS;
+
+	queue_interrupt_event(p_slot, event_type);
+
+	return 0;
+
+}
+
+u8 shpchp_handle_switch_change(u8 hp_slot, struct controller *ctrl)
+{
+	struct slot *p_slot;
+	u8 getstatus;
+	u32 event_type;
+
+	/* Switch Change */
+	ctrl_dbg(ctrl, "Switch interrupt received\n");
+
+	p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
+	p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save));
+	p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
+	ctrl_dbg(ctrl, "Card present %x Power status %x\n",
+		 p_slot->presence_save, p_slot->pwr_save);
+
+	if (getstatus) {
+		/*
+		 * Switch opened
+		 */
+		ctrl_info(ctrl, "Latch open on Slot(%s)\n", slot_name(p_slot));
+		event_type = INT_SWITCH_OPEN;
+		if (p_slot->pwr_save && p_slot->presence_save) {
+			event_type = INT_POWER_FAULT;
+			ctrl_err(ctrl, "Surprise Removal of card\n");
+		}
+	} else {
+		/*
+		 *  Switch closed
+		 */
+		ctrl_info(ctrl, "Latch close on Slot(%s)\n", slot_name(p_slot));
+		event_type = INT_SWITCH_CLOSE;
+	}
+
+	queue_interrupt_event(p_slot, event_type);
+
+	return 1;
+}
+
+u8 shpchp_handle_presence_change(u8 hp_slot, struct controller *ctrl)
+{
+	struct slot *p_slot;
+	u32 event_type;
+
+	/* Presence Change */
+	ctrl_dbg(ctrl, "Presence/Notify input change\n");
+
+	p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
+
+	/*
+	 * Save the presence state
+	 */
+	p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save));
+	if (p_slot->presence_save) {
+		/*
+		 * Card Present
+		 */
+		ctrl_info(ctrl, "Card present on Slot(%s)\n",
+			  slot_name(p_slot));
+		event_type = INT_PRESENCE_ON;
+	} else {
+		/*
+		 * Not Present
+		 */
+		ctrl_info(ctrl, "Card not present on Slot(%s)\n",
+			  slot_name(p_slot));
+		event_type = INT_PRESENCE_OFF;
+	}
+
+	queue_interrupt_event(p_slot, event_type);
+
+	return 1;
+}
+
+u8 shpchp_handle_power_fault(u8 hp_slot, struct controller *ctrl)
+{
+	struct slot *p_slot;
+	u32 event_type;
+
+	/* Power fault */
+	ctrl_dbg(ctrl, "Power fault interrupt received\n");
+
+	p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
+
+	if (!(p_slot->hpc_ops->query_power_fault(p_slot))) {
+		/*
+		 * Power fault Cleared
+		 */
+		ctrl_info(ctrl, "Power fault cleared on Slot(%s)\n",
+			  slot_name(p_slot));
+		p_slot->status = 0x00;
+		event_type = INT_POWER_FAULT_CLEAR;
+	} else {
+		/*
+		 *   Power fault
+		 */
+		ctrl_info(ctrl, "Power fault on Slot(%s)\n", slot_name(p_slot));
+		event_type = INT_POWER_FAULT;
+		/* set power fault status for this board */
+		p_slot->status = 0xFF;
+		ctrl_info(ctrl, "Power fault bit %x set\n", hp_slot);
+	}
+
+	queue_interrupt_event(p_slot, event_type);
+
+	return 1;
+}
+
+/* The following routines constitute the bulk of the
+   hotplug controller logic
+ */
+static int change_bus_speed(struct controller *ctrl, struct slot *p_slot,
+		enum pci_bus_speed speed)
+{
+	int rc = 0;
+
+	ctrl_dbg(ctrl, "Change speed to %d\n", speed);
+	rc = p_slot->hpc_ops->set_bus_speed_mode(p_slot, speed);
+	if (rc) {
+		ctrl_err(ctrl, "%s: Issue of set bus speed mode command failed\n",
+			 __func__);
+		return WRONG_BUS_FREQUENCY;
+	}
+	return rc;
+}
+
+static int fix_bus_speed(struct controller *ctrl, struct slot *pslot,
+		u8 flag, enum pci_bus_speed asp, enum pci_bus_speed bsp,
+		enum pci_bus_speed msp)
+{
+	int rc = 0;
+
+	/*
+	 * If other slots on the same bus are occupied, we cannot
+	 * change the bus speed.
+	 */
+	if (flag) {
+		if (asp < bsp) {
+			ctrl_err(ctrl, "Speed of bus %x and adapter %x mismatch\n",
+				 bsp, asp);
+			rc = WRONG_BUS_FREQUENCY;
+		}
+		return rc;
+	}
+
+	if (asp < msp) {
+		if (bsp != asp)
+			rc = change_bus_speed(ctrl, pslot, asp);
+	} else {
+		if (bsp != msp)
+			rc = change_bus_speed(ctrl, pslot, msp);
+	}
+	return rc;
+}
+
+/**
+ * board_added - Called after a board has been added to the system.
+ * @p_slot: target &slot
+ *
+ * Turns power on for the board.
+ * Configures board.
+ */
+static int board_added(struct slot *p_slot)
+{
+	u8 hp_slot;
+	u8 slots_not_empty = 0;
+	int rc = 0;
+	enum pci_bus_speed asp, bsp, msp;
+	struct controller *ctrl = p_slot->ctrl;
+	struct pci_bus *parent = ctrl->pci_dev->subordinate;
+
+	hp_slot = p_slot->device - ctrl->slot_device_offset;
+
+	ctrl_dbg(ctrl, "%s: p_slot->device, slot_offset, hp_slot = %d, %d ,%d\n",
+		 __func__, p_slot->device, ctrl->slot_device_offset, hp_slot);
+
+	/* Power on slot without connecting to bus */
+	rc = p_slot->hpc_ops->power_on_slot(p_slot);
+	if (rc) {
+		ctrl_err(ctrl, "Failed to power on slot\n");
+		return -1;
+	}
+
+	if ((ctrl->pci_dev->vendor == 0x8086) && (ctrl->pci_dev->device == 0x0332)) {
+		rc = p_slot->hpc_ops->set_bus_speed_mode(p_slot, PCI_SPEED_33MHz);
+		if (rc) {
+			ctrl_err(ctrl, "%s: Issue of set bus speed mode command failed\n",
+				 __func__);
+			return WRONG_BUS_FREQUENCY;
+		}
+
+		/* turn on board, blink green LED, turn off Amber LED */
+		rc = p_slot->hpc_ops->slot_enable(p_slot);
+		if (rc) {
+			ctrl_err(ctrl, "Issue of Slot Enable command failed\n");
+			return rc;
+		}
+	}
+
+	rc = p_slot->hpc_ops->get_adapter_speed(p_slot, &asp);
+	if (rc) {
+		ctrl_err(ctrl, "Can't get adapter speed or bus mode mismatch\n");
+		return WRONG_BUS_FREQUENCY;
+	}
+
+	bsp = ctrl->pci_dev->subordinate->cur_bus_speed;
+	msp = ctrl->pci_dev->subordinate->max_bus_speed;
+
+	/* Check if there are other slots or devices on the same bus */
+	if (!list_empty(&ctrl->pci_dev->subordinate->devices))
+		slots_not_empty = 1;
+
+	ctrl_dbg(ctrl, "%s: slots_not_empty %d, adapter_speed %d, bus_speed %d, max_bus_speed %d\n",
+		 __func__, slots_not_empty, asp,
+		 bsp, msp);
+
+	rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, asp, bsp, msp);
+	if (rc)
+		return rc;
+
+	/* turn on board, blink green LED, turn off Amber LED */
+	rc = p_slot->hpc_ops->slot_enable(p_slot);
+	if (rc) {
+		ctrl_err(ctrl, "Issue of Slot Enable command failed\n");
+		return rc;
+	}
+
+	/* Wait for ~1 second */
+	msleep(1000);
+
+	ctrl_dbg(ctrl, "%s: slot status = %x\n", __func__, p_slot->status);
+	/* Check for a power fault */
+	if (p_slot->status == 0xFF) {
+		/* power fault occurred, but it was benign */
+		ctrl_dbg(ctrl, "%s: Power fault\n", __func__);
+		rc = POWER_FAILURE;
+		p_slot->status = 0;
+		goto err_exit;
+	}
+
+	if (shpchp_configure_device(p_slot)) {
+		ctrl_err(ctrl, "Cannot add device at %04x:%02x:%02x\n",
+			 pci_domain_nr(parent), p_slot->bus, p_slot->device);
+		goto err_exit;
+	}
+
+	p_slot->status = 0;
+	p_slot->is_a_board = 0x01;
+	p_slot->pwr_save = 1;
+
+	p_slot->hpc_ops->green_led_on(p_slot);
+
+	return 0;
+
+err_exit:
+	/* turn off slot, turn on Amber LED, turn off Green LED */
+	rc = p_slot->hpc_ops->slot_disable(p_slot);
+	if (rc) {
+		ctrl_err(ctrl, "%s: Issue of Slot Disable command failed\n",
+			 __func__);
+		return rc;
+	}
+
+	return(rc);
+}
+
+
+/**
+ * remove_board - Turns off slot and LEDs
+ * @p_slot: target &slot
+ */
+static int remove_board(struct slot *p_slot)
+{
+	struct controller *ctrl = p_slot->ctrl;
+	u8 hp_slot;
+	int rc;
+
+	if (shpchp_unconfigure_device(p_slot))
+		return(1);
+
+	hp_slot = p_slot->device - ctrl->slot_device_offset;
+	p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
+
+	ctrl_dbg(ctrl, "%s: hp_slot = %d\n", __func__, hp_slot);
+
+	/* Change status to shutdown */
+	if (p_slot->is_a_board)
+		p_slot->status = 0x01;
+
+	/* turn off slot, turn on Amber LED, turn off Green LED */
+	rc = p_slot->hpc_ops->slot_disable(p_slot);
+	if (rc) {
+		ctrl_err(ctrl, "%s: Issue of Slot Disable command failed\n",
+			 __func__);
+		return rc;
+	}
+
+	rc = p_slot->hpc_ops->set_attention_status(p_slot, 0);
+	if (rc) {
+		ctrl_err(ctrl, "Issue of Set Attention command failed\n");
+		return rc;
+	}
+
+	p_slot->pwr_save = 0;
+	p_slot->is_a_board = 0;
+
+	return 0;
+}
+
+
+struct pushbutton_work_info {
+	struct slot *p_slot;
+	struct work_struct work;
+};
+
+/**
+ * shpchp_pushbutton_thread - handle pushbutton events
+ * @work: &struct work_struct to be handled
+ *
+ * Scheduled procedure to handle blocking stuff for the pushbuttons.
+ * Handles all pending events and exits.
+ */
+static void shpchp_pushbutton_thread(struct work_struct *work)
+{
+	struct pushbutton_work_info *info =
+		container_of(work, struct pushbutton_work_info, work);
+	struct slot *p_slot = info->p_slot;
+
+	mutex_lock(&p_slot->lock);
+	switch (p_slot->state) {
+	case POWEROFF_STATE:
+		mutex_unlock(&p_slot->lock);
+		shpchp_disable_slot(p_slot);
+		mutex_lock(&p_slot->lock);
+		p_slot->state = STATIC_STATE;
+		break;
+	case POWERON_STATE:
+		mutex_unlock(&p_slot->lock);
+		if (shpchp_enable_slot(p_slot))
+			p_slot->hpc_ops->green_led_off(p_slot);
+		mutex_lock(&p_slot->lock);
+		p_slot->state = STATIC_STATE;
+		break;
+	default:
+		break;
+	}
+	mutex_unlock(&p_slot->lock);
+
+	kfree(info);
+}
+
+void shpchp_queue_pushbutton_work(struct work_struct *work)
+{
+	struct slot *p_slot = container_of(work, struct slot, work.work);
+	struct pushbutton_work_info *info;
+
+	info = kmalloc(sizeof(*info), GFP_KERNEL);
+	if (!info) {
+		ctrl_err(p_slot->ctrl, "%s: Cannot allocate memory\n",
+			 __func__);
+		return;
+	}
+	info->p_slot = p_slot;
+	INIT_WORK(&info->work, shpchp_pushbutton_thread);
+
+	mutex_lock(&p_slot->lock);
+	switch (p_slot->state) {
+	case BLINKINGOFF_STATE:
+		p_slot->state = POWEROFF_STATE;
+		break;
+	case BLINKINGON_STATE:
+		p_slot->state = POWERON_STATE;
+		break;
+	default:
+		kfree(info);
+		goto out;
+	}
+	queue_work(p_slot->wq, &info->work);
+ out:
+	mutex_unlock(&p_slot->lock);
+}
+
+static int update_slot_info (struct slot *slot)
+{
+	struct hotplug_slot_info *info;
+	int result;
+
+	info = kmalloc(sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	slot->hpc_ops->get_power_status(slot, &(info->power_status));
+	slot->hpc_ops->get_attention_status(slot, &(info->attention_status));
+	slot->hpc_ops->get_latch_status(slot, &(info->latch_status));
+	slot->hpc_ops->get_adapter_status(slot, &(info->adapter_status));
+
+	result = pci_hp_change_slot_info(slot->hotplug_slot, info);
+	kfree (info);
+	return result;
+}
+
+/*
+ * Note: This function must be called with slot->lock held
+ */
+static void handle_button_press_event(struct slot *p_slot)
+{
+	u8 getstatus;
+	struct controller *ctrl = p_slot->ctrl;
+
+	switch (p_slot->state) {
+	case STATIC_STATE:
+		p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
+		if (getstatus) {
+			p_slot->state = BLINKINGOFF_STATE;
+			ctrl_info(ctrl, "PCI slot #%s - powering off due to button press\n",
+				  slot_name(p_slot));
+		} else {
+			p_slot->state = BLINKINGON_STATE;
+			ctrl_info(ctrl, "PCI slot #%s - powering on due to button press\n",
+				  slot_name(p_slot));
+		}
+		/* blink green LED and turn off amber */
+		p_slot->hpc_ops->green_led_blink(p_slot);
+		p_slot->hpc_ops->set_attention_status(p_slot, 0);
+
+		queue_delayed_work(p_slot->wq, &p_slot->work, 5*HZ);
+		break;
+	case BLINKINGOFF_STATE:
+	case BLINKINGON_STATE:
+		/*
+		 * Cancel if we are still blinking; this means that we
+		 * press the attention again before the 5 sec. limit
+		 * expires to cancel hot-add or hot-remove
+		 */
+		ctrl_info(ctrl, "Button cancel on Slot(%s)\n",
+			  slot_name(p_slot));
+		cancel_delayed_work(&p_slot->work);
+		if (p_slot->state == BLINKINGOFF_STATE)
+			p_slot->hpc_ops->green_led_on(p_slot);
+		else
+			p_slot->hpc_ops->green_led_off(p_slot);
+		p_slot->hpc_ops->set_attention_status(p_slot, 0);
+		ctrl_info(ctrl, "PCI slot #%s - action canceled due to button press\n",
+			  slot_name(p_slot));
+		p_slot->state = STATIC_STATE;
+		break;
+	case POWEROFF_STATE:
+	case POWERON_STATE:
+		/*
+		 * Ignore if the slot is on power-on or power-off state;
+		 * this means that the previous attention button action
+		 * to hot-add or hot-remove is undergoing
+		 */
+		ctrl_info(ctrl, "Button ignore on Slot(%s)\n",
+			  slot_name(p_slot));
+		update_slot_info(p_slot);
+		break;
+	default:
+		ctrl_warn(ctrl, "Not a valid state\n");
+		break;
+	}
+}
+
+static void interrupt_event_handler(struct work_struct *work)
+{
+	struct event_info *info = container_of(work, struct event_info, work);
+	struct slot *p_slot = info->p_slot;
+
+	mutex_lock(&p_slot->lock);
+	switch (info->event_type) {
+	case INT_BUTTON_PRESS:
+		handle_button_press_event(p_slot);
+		break;
+	case INT_POWER_FAULT:
+		ctrl_dbg(p_slot->ctrl, "%s: Power fault\n", __func__);
+		p_slot->hpc_ops->set_attention_status(p_slot, 1);
+		p_slot->hpc_ops->green_led_off(p_slot);
+		break;
+	default:
+		update_slot_info(p_slot);
+		break;
+	}
+	mutex_unlock(&p_slot->lock);
+
+	kfree(info);
+}
+
+
+static int shpchp_enable_slot (struct slot *p_slot)
+{
+	u8 getstatus = 0;
+	int rc, retval = -ENODEV;
+	struct controller *ctrl = p_slot->ctrl;
+
+	/* Check to see if (latch closed, card present, power off) */
+	mutex_lock(&p_slot->ctrl->crit_sect);
+	rc = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus);
+	if (rc || !getstatus) {
+		ctrl_info(ctrl, "No adapter on slot(%s)\n", slot_name(p_slot));
+		goto out;
+	}
+	rc = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
+	if (rc || getstatus) {
+		ctrl_info(ctrl, "Latch open on slot(%s)\n", slot_name(p_slot));
+		goto out;
+	}
+	rc = p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
+	if (rc || getstatus) {
+		ctrl_info(ctrl, "Already enabled on slot(%s)\n",
+			  slot_name(p_slot));
+		goto out;
+	}
+
+	p_slot->is_a_board = 1;
+
+	/* We have to save the presence info for these slots */
+	p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save));
+	p_slot->hpc_ops->get_power_status(p_slot, &(p_slot->pwr_save));
+	ctrl_dbg(ctrl, "%s: p_slot->pwr_save %x\n", __func__, p_slot->pwr_save);
+	p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
+
+	if (((p_slot->ctrl->pci_dev->vendor == PCI_VENDOR_ID_AMD) ||
+	    (p_slot->ctrl->pci_dev->device == PCI_DEVICE_ID_AMD_POGO_7458))
+	     && p_slot->ctrl->num_slots == 1) {
+		/* handle amd pogo errata; this must be done before enable  */
+		amd_pogo_errata_save_misc_reg(p_slot);
+		retval = board_added(p_slot);
+		/* handle amd pogo errata; this must be done after enable  */
+		amd_pogo_errata_restore_misc_reg(p_slot);
+	} else
+		retval = board_added(p_slot);
+
+	if (retval) {
+		p_slot->hpc_ops->get_adapter_status(p_slot,
+				&(p_slot->presence_save));
+		p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
+	}
+
+	update_slot_info(p_slot);
+ out:
+	mutex_unlock(&p_slot->ctrl->crit_sect);
+	return retval;
+}
+
+
+static int shpchp_disable_slot (struct slot *p_slot)
+{
+	u8 getstatus = 0;
+	int rc, retval = -ENODEV;
+	struct controller *ctrl = p_slot->ctrl;
+
+	if (!p_slot->ctrl)
+		return -ENODEV;
+
+	/* Check to see if (latch closed, card present, power on) */
+	mutex_lock(&p_slot->ctrl->crit_sect);
+
+	rc = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus);
+	if (rc || !getstatus) {
+		ctrl_info(ctrl, "No adapter on slot(%s)\n", slot_name(p_slot));
+		goto out;
+	}
+	rc = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
+	if (rc || getstatus) {
+		ctrl_info(ctrl, "Latch open on slot(%s)\n", slot_name(p_slot));
+		goto out;
+	}
+	rc = p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
+	if (rc || !getstatus) {
+		ctrl_info(ctrl, "Already disabled on slot(%s)\n",
+			  slot_name(p_slot));
+		goto out;
+	}
+
+	retval = remove_board(p_slot);
+	update_slot_info(p_slot);
+ out:
+	mutex_unlock(&p_slot->ctrl->crit_sect);
+	return retval;
+}
+
+int shpchp_sysfs_enable_slot(struct slot *p_slot)
+{
+	int retval = -ENODEV;
+	struct controller *ctrl = p_slot->ctrl;
+
+	mutex_lock(&p_slot->lock);
+	switch (p_slot->state) {
+	case BLINKINGON_STATE:
+		cancel_delayed_work(&p_slot->work);
+	case STATIC_STATE:
+		p_slot->state = POWERON_STATE;
+		mutex_unlock(&p_slot->lock);
+		retval = shpchp_enable_slot(p_slot);
+		mutex_lock(&p_slot->lock);
+		p_slot->state = STATIC_STATE;
+		break;
+	case POWERON_STATE:
+		ctrl_info(ctrl, "Slot %s is already in powering on state\n",
+			  slot_name(p_slot));
+		break;
+	case BLINKINGOFF_STATE:
+	case POWEROFF_STATE:
+		ctrl_info(ctrl, "Already enabled on slot %s\n",
+			  slot_name(p_slot));
+		break;
+	default:
+		ctrl_err(ctrl, "Not a valid state on slot %s\n",
+			 slot_name(p_slot));
+		break;
+	}
+	mutex_unlock(&p_slot->lock);
+
+	return retval;
+}
+
+int shpchp_sysfs_disable_slot(struct slot *p_slot)
+{
+	int retval = -ENODEV;
+	struct controller *ctrl = p_slot->ctrl;
+
+	mutex_lock(&p_slot->lock);
+	switch (p_slot->state) {
+	case BLINKINGOFF_STATE:
+		cancel_delayed_work(&p_slot->work);
+	case STATIC_STATE:
+		p_slot->state = POWEROFF_STATE;
+		mutex_unlock(&p_slot->lock);
+		retval = shpchp_disable_slot(p_slot);
+		mutex_lock(&p_slot->lock);
+		p_slot->state = STATIC_STATE;
+		break;
+	case POWEROFF_STATE:
+		ctrl_info(ctrl, "Slot %s is already in powering off state\n",
+			  slot_name(p_slot));
+		break;
+	case BLINKINGON_STATE:
+	case POWERON_STATE:
+		ctrl_info(ctrl, "Already disabled on slot %s\n",
+			  slot_name(p_slot));
+		break;
+	default:
+		ctrl_err(ctrl, "Not a valid state on slot %s\n",
+			 slot_name(p_slot));
+		break;
+	}
+	mutex_unlock(&p_slot->lock);
+
+	return retval;
+}