1 files changed, 182 insertions, 41 deletions

diff --git a/kernel/drivers/pci/host/pcie-iproc.c b/kernel/drivers/pci/host/pcie-iproc.c
index 329e1b545..eac719af1 100644
--- a/kernel/drivers/pci/host/pcie-iproc.c
+++ b/kernel/drivers/pci/host/pcie-iproc.c
@@ -1,6 +1,6 @@
 /*
  * Copyright (C) 2014 Hauke Mehrtens <hauke@hauke-m.de>
- * Copyright (C) 2015 Broadcom Corporatcommon ion
+ * Copyright (C) 2015 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
@@ -31,6 +31,8 @@
 #include "pcie-iproc.h"
 
 #define CLK_CONTROL_OFFSET           0x000
+#define EP_PERST_SOURCE_SELECT_SHIFT 2
+#define EP_PERST_SOURCE_SELECT       BIT(EP_PERST_SOURCE_SELECT_SHIFT)
 #define EP_MODE_SURVIVE_PERST_SHIFT  1
 #define EP_MODE_SURVIVE_PERST        BIT(EP_MODE_SURVIVE_PERST_SHIFT)
 #define RC_PCIE_RST_OUTPUT_SHIFT     0
@@ -58,9 +60,35 @@
 #define SYS_RC_INTX_EN               0x330
 #define SYS_RC_INTX_MASK             0xf
 
-static inline struct iproc_pcie *sys_to_pcie(struct pci_sys_data *sys)
+#define PCIE_LINK_STATUS_OFFSET      0xf0c
+#define PCIE_PHYLINKUP_SHIFT         3
+#define PCIE_PHYLINKUP               BIT(PCIE_PHYLINKUP_SHIFT)
+#define PCIE_DL_ACTIVE_SHIFT         2
+#define PCIE_DL_ACTIVE               BIT(PCIE_DL_ACTIVE_SHIFT)
+
+#define OARR_VALID_SHIFT             0
+#define OARR_VALID                   BIT(OARR_VALID_SHIFT)
+#define OARR_SIZE_CFG_SHIFT          1
+#define OARR_SIZE_CFG                BIT(OARR_SIZE_CFG_SHIFT)
+
+#define OARR_LO(window)              (0xd20 + (window) * 8)
+#define OARR_HI(window)              (0xd24 + (window) * 8)
+#define OMAP_LO(window)              (0xd40 + (window) * 8)
+#define OMAP_HI(window)              (0xd44 + (window) * 8)
+
+#define MAX_NUM_OB_WINDOWS           2
+
+static inline struct iproc_pcie *iproc_data(struct pci_bus *bus)
 {
-	return sys->private_data;
+	struct iproc_pcie *pcie;
+#ifdef CONFIG_ARM
+	struct pci_sys_data *sys = bus->sysdata;
+
+	pcie = sys->private_data;
+#else
+	pcie = bus->sysdata;
+#endif
+	return pcie;
 }
 
 /**
@@ -71,8 +99,7 @@ static void __iomem *iproc_pcie_map_cfg_bus(struct pci_bus *bus,
 					    unsigned int devfn,
 					    int where)
 {
-	struct pci_sys_data *sys = bus->sysdata;
-	struct iproc_pcie *pcie = sys_to_pcie(sys);
+	struct iproc_pcie *pcie = iproc_data(bus);
 	unsigned slot = PCI_SLOT(devfn);
 	unsigned fn = PCI_FUNC(devfn);
 	unsigned busno = bus->number;
@@ -112,23 +139,32 @@ static void iproc_pcie_reset(struct iproc_pcie *pcie)
 	u32 val;
 
 	/*
-	 * Configure the PCIe controller as root complex and send a downstream
-	 * reset
+	 * Select perst_b signal as reset source. Put the device into reset,
+	 * and then bring it out of reset
 	 */
-	val = EP_MODE_SURVIVE_PERST | RC_PCIE_RST_OUTPUT;
+	val = readl(pcie->base + CLK_CONTROL_OFFSET);
+	val &= ~EP_PERST_SOURCE_SELECT & ~EP_MODE_SURVIVE_PERST &
+		~RC_PCIE_RST_OUTPUT;
 	writel(val, pcie->base + CLK_CONTROL_OFFSET);
 	udelay(250);
-	val &= ~EP_MODE_SURVIVE_PERST;
+
+	val |= RC_PCIE_RST_OUTPUT;
 	writel(val, pcie->base + CLK_CONTROL_OFFSET);
-	msleep(250);
+	msleep(100);
 }
 
 static int iproc_pcie_check_link(struct iproc_pcie *pcie, struct pci_bus *bus)
 {
 	u8 hdr_type;
-	u32 link_ctrl;
+	u32 link_ctrl, class, val;
 	u16 pos, link_status;
-	int link_is_active = 0;
+	bool link_is_active = false;
+
+	val = readl(pcie->base + PCIE_LINK_STATUS_OFFSET);
+	if (!(val & PCIE_PHYLINKUP) || !(val & PCIE_DL_ACTIVE)) {
+		dev_err(pcie->dev, "PHY or data link is INACTIVE!\n");
+		return -ENODEV;
+	}
 
 	/* make sure we are not in EP mode */
 	pci_bus_read_config_byte(bus, 0, PCI_HEADER_TYPE, &hdr_type);
@@ -138,14 +174,19 @@ static int iproc_pcie_check_link(struct iproc_pcie *pcie, struct pci_bus *bus)
 	}
 
 	/* force class to PCI_CLASS_BRIDGE_PCI (0x0604) */
-	pci_bus_write_config_word(bus, 0, PCI_CLASS_DEVICE,
-				  PCI_CLASS_BRIDGE_PCI);
+#define PCI_BRIDGE_CTRL_REG_OFFSET 0x43c
+#define PCI_CLASS_BRIDGE_MASK      0xffff00
+#define PCI_CLASS_BRIDGE_SHIFT     8
+	pci_bus_read_config_dword(bus, 0, PCI_BRIDGE_CTRL_REG_OFFSET, &class);
+	class &= ~PCI_CLASS_BRIDGE_MASK;
+	class |= (PCI_CLASS_BRIDGE_PCI << PCI_CLASS_BRIDGE_SHIFT);
+	pci_bus_write_config_dword(bus, 0, PCI_BRIDGE_CTRL_REG_OFFSET, class);
 
 	/* check link status to see if link is active */
 	pos = pci_bus_find_capability(bus, 0, PCI_CAP_ID_EXP);
 	pci_bus_read_config_word(bus, 0, pos + PCI_EXP_LNKSTA, &link_status);
 	if (link_status & PCI_EXP_LNKSTA_NLW)
-		link_is_active = 1;
+		link_is_active = true;
 
 	if (!link_is_active) {
 		/* try GEN 1 link speed */
@@ -169,7 +210,7 @@ static int iproc_pcie_check_link(struct iproc_pcie *pcie, struct pci_bus *bus)
 			pci_bus_read_config_word(bus, 0, pos + PCI_EXP_LNKSTA,
 						 &link_status);
 			if (link_status & PCI_EXP_LNKSTA_NLW)
-				link_is_active = 1;
+				link_is_active = true;
 		}
 	}
 
@@ -183,35 +224,140 @@ static void iproc_pcie_enable(struct iproc_pcie *pcie)
 	writel(SYS_RC_INTX_MASK, pcie->base + SYS_RC_INTX_EN);
 }
 
-int iproc_pcie_setup(struct iproc_pcie *pcie)
+/**
+ * Some iProc SoCs require the SW to configure the outbound address mapping
+ *
+ * Outbound address translation:
+ *
+ * iproc_pcie_address = axi_address - axi_offset
+ * OARR = iproc_pcie_address
+ * OMAP = pci_addr
+ *
+ * axi_addr -> iproc_pcie_address -> OARR -> OMAP -> pci_address
+ */
+static int iproc_pcie_setup_ob(struct iproc_pcie *pcie, u64 axi_addr,
+			       u64 pci_addr, resource_size_t size)
+{
+	struct iproc_pcie_ob *ob = &pcie->ob;
+	unsigned i;
+	u64 max_size = (u64)ob->window_size * MAX_NUM_OB_WINDOWS;
+	u64 remainder;
+
+	if (size > max_size) {
+		dev_err(pcie->dev,
+			"res size 0x%pap exceeds max supported size 0x%llx\n",
+			&size, max_size);
+		return -EINVAL;
+	}
+
+	div64_u64_rem(size, ob->window_size, &remainder);
+	if (remainder) {
+		dev_err(pcie->dev,
+			"res size %pap needs to be multiple of window size %pap\n",
+			&size, &ob->window_size);
+		return -EINVAL;
+	}
+
+	if (axi_addr < ob->axi_offset) {
+		dev_err(pcie->dev,
+			"axi address %pap less than offset %pap\n",
+			&axi_addr, &ob->axi_offset);
+		return -EINVAL;
+	}
+
+	/*
+	 * Translate the AXI address to the internal address used by the iProc
+	 * PCIe core before programming the OARR
+	 */
+	axi_addr -= ob->axi_offset;
+
+	for (i = 0; i < MAX_NUM_OB_WINDOWS; i++) {
+		writel(lower_32_bits(axi_addr) | OARR_VALID |
+		       (ob->set_oarr_size ? 1 : 0), pcie->base + OARR_LO(i));
+		writel(upper_32_bits(axi_addr), pcie->base + OARR_HI(i));
+		writel(lower_32_bits(pci_addr), pcie->base + OMAP_LO(i));
+		writel(upper_32_bits(pci_addr), pcie->base + OMAP_HI(i));
+
+		size -= ob->window_size;
+		if (size == 0)
+			break;
+
+		axi_addr += ob->window_size;
+		pci_addr += ob->window_size;
+	}
+
+	return 0;
+}
+
+static int iproc_pcie_map_ranges(struct iproc_pcie *pcie,
+				 struct list_head *resources)
+{
+	struct resource_entry *window;
+	int ret;
+
+	resource_list_for_each_entry(window, resources) {
+		struct resource *res = window->res;
+		u64 res_type = resource_type(res);
+
+		switch (res_type) {
+		case IORESOURCE_IO:
+		case IORESOURCE_BUS:
+			break;
+		case IORESOURCE_MEM:
+			ret = iproc_pcie_setup_ob(pcie, res->start,
+						  res->start - window->offset,
+						  resource_size(res));
+			if (ret)
+				return ret;
+			break;
+		default:
+			dev_err(pcie->dev, "invalid resource %pR\n", res);
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
+int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
 {
 	int ret;
+	void *sysdata;
 	struct pci_bus *bus;
 
 	if (!pcie || !pcie->dev || !pcie->base)
 		return -EINVAL;
 
-	if (pcie->phy) {
-		ret = phy_init(pcie->phy);
-		if (ret) {
-			dev_err(pcie->dev, "unable to initialize PCIe PHY\n");
-			return ret;
-		}
-
-		ret = phy_power_on(pcie->phy);
-		if (ret) {
-			dev_err(pcie->dev, "unable to power on PCIe PHY\n");
-			goto err_exit_phy;
-		}
+	ret = phy_init(pcie->phy);
+	if (ret) {
+		dev_err(pcie->dev, "unable to initialize PCIe PHY\n");
+		return ret;
+	}
 
+	ret = phy_power_on(pcie->phy);
+	if (ret) {
+		dev_err(pcie->dev, "unable to power on PCIe PHY\n");
+		goto err_exit_phy;
 	}
 
 	iproc_pcie_reset(pcie);
 
+	if (pcie->need_ob_cfg) {
+		ret = iproc_pcie_map_ranges(pcie, res);
+		if (ret) {
+			dev_err(pcie->dev, "map failed\n");
+			goto err_power_off_phy;
+		}
+	}
+
+#ifdef CONFIG_ARM
 	pcie->sysdata.private_data = pcie;
+	sysdata = &pcie->sysdata;
+#else
+	sysdata = pcie;
+#endif
 
-	bus = pci_create_root_bus(pcie->dev, 0, &iproc_pcie_ops,
-				  &pcie->sysdata, pcie->resources);
+	bus = pci_create_root_bus(pcie->dev, 0, &iproc_pcie_ops, sysdata, res);
 	if (!bus) {
 		dev_err(pcie->dev, "unable to create PCI root bus\n");
 		ret = -ENOMEM;
@@ -229,7 +375,7 @@ int iproc_pcie_setup(struct iproc_pcie *pcie)
 
 	pci_scan_child_bus(bus);
 	pci_assign_unassigned_bus_resources(bus);
-	pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci);
+	pci_fixup_irqs(pci_common_swizzle, pcie->map_irq);
 	pci_bus_add_devices(bus);
 
 	return 0;
@@ -239,12 +385,9 @@ err_rm_root_bus:
 	pci_remove_root_bus(bus);
 
 err_power_off_phy:
-	if (pcie->phy)
-		phy_power_off(pcie->phy);
+	phy_power_off(pcie->phy);
 err_exit_phy:
-	if (pcie->phy)
-		phy_exit(pcie->phy);
-
+	phy_exit(pcie->phy);
 	return ret;
 }
 EXPORT_SYMBOL(iproc_pcie_setup);
@@ -254,10 +397,8 @@ int iproc_pcie_remove(struct iproc_pcie *pcie)
 	pci_stop_root_bus(pcie->root_bus);
 	pci_remove_root_bus(pcie->root_bus);
 
-	if (pcie->phy) {
-		phy_power_off(pcie->phy);
-		phy_exit(pcie->phy);
-	}
+	phy_power_off(pcie->phy);
+	phy_exit(pcie->phy);
 
 	return 0;
 }