summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/nfc/st21nfca/i2c.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/nfc/st21nfca/i2c.c')
-rw-r--r--kernel/drivers/nfc/st21nfca/i2c.c695
1 files changed, 695 insertions, 0 deletions
diff --git a/kernel/drivers/nfc/st21nfca/i2c.c b/kernel/drivers/nfc/st21nfca/i2c.c
new file mode 100644
index 000000000..a32143951
--- /dev/null
+++ b/kernel/drivers/nfc/st21nfca/i2c.c
@@ -0,0 +1,695 @@
+/*
+ * I2C Link Layer for ST21NFCA HCI based Driver
+ * Copyright (C) 2014 STMicroelectronics SAS. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/crc-ccitt.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/of_irq.h>
+#include <linux/of_gpio.h>
+#include <linux/miscdevice.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/nfc.h>
+#include <linux/firmware.h>
+#include <linux/platform_data/st21nfca.h>
+#include <asm/unaligned.h>
+
+#include <net/nfc/hci.h>
+#include <net/nfc/llc.h>
+#include <net/nfc/nfc.h>
+
+#include "st21nfca.h"
+
+/*
+ * Every frame starts with ST21NFCA_SOF_EOF and ends with ST21NFCA_SOF_EOF.
+ * Because ST21NFCA_SOF_EOF is a possible data value, there is a mecanism
+ * called byte stuffing has been introduced.
+ *
+ * if byte == ST21NFCA_SOF_EOF or ST21NFCA_ESCAPE_BYTE_STUFFING
+ * - insert ST21NFCA_ESCAPE_BYTE_STUFFING (escape byte)
+ * - xor byte with ST21NFCA_BYTE_STUFFING_MASK
+ */
+#define ST21NFCA_SOF_EOF 0x7e
+#define ST21NFCA_BYTE_STUFFING_MASK 0x20
+#define ST21NFCA_ESCAPE_BYTE_STUFFING 0x7d
+
+/* SOF + 00 */
+#define ST21NFCA_FRAME_HEADROOM 2
+
+/* 2 bytes crc + EOF */
+#define ST21NFCA_FRAME_TAILROOM 3
+#define IS_START_OF_FRAME(buf) (buf[0] == ST21NFCA_SOF_EOF && \
+ buf[1] == 0)
+
+#define ST21NFCA_HCI_I2C_DRIVER_NAME "st21nfca_hci_i2c"
+
+static struct i2c_device_id st21nfca_hci_i2c_id_table[] = {
+ {ST21NFCA_HCI_DRIVER_NAME, 0},
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, st21nfca_hci_i2c_id_table);
+
+struct st21nfca_i2c_phy {
+ struct i2c_client *i2c_dev;
+ struct nfc_hci_dev *hdev;
+
+ unsigned int gpio_ena;
+ unsigned int irq_polarity;
+
+ struct st21nfca_se_status se_status;
+
+ struct sk_buff *pending_skb;
+ int current_read_len;
+ /*
+ * crc might have fail because i2c macro
+ * is disable due to other interface activity
+ */
+ int crc_trials;
+
+ int powered;
+ int run_mode;
+
+ /*
+ * < 0 if hardware error occured (e.g. i2c err)
+ * and prevents normal operation.
+ */
+ int hard_fault;
+ struct mutex phy_lock;
+};
+static u8 len_seq[] = { 16, 24, 12, 29 };
+static u16 wait_tab[] = { 2, 3, 5, 15, 20, 40};
+
+#define I2C_DUMP_SKB(info, skb) \
+do { \
+ pr_debug("%s:\n", info); \
+ print_hex_dump(KERN_DEBUG, "i2c: ", DUMP_PREFIX_OFFSET, \
+ 16, 1, (skb)->data, (skb)->len, 0); \
+} while (0)
+
+/*
+ * In order to get the CLF in a known state we generate an internal reboot
+ * using a proprietary command.
+ * Once the reboot is completed, we expect to receive a ST21NFCA_SOF_EOF
+ * fill buffer.
+ */
+static int st21nfca_hci_platform_init(struct st21nfca_i2c_phy *phy)
+{
+ u16 wait_reboot[] = { 50, 300, 1000 };
+ char reboot_cmd[] = { 0x7E, 0x66, 0x48, 0xF6, 0x7E };
+ u8 tmp[ST21NFCA_HCI_LLC_MAX_SIZE];
+ int i, r = -1;
+
+ for (i = 0; i < ARRAY_SIZE(wait_reboot) && r < 0; i++) {
+ r = i2c_master_send(phy->i2c_dev, reboot_cmd,
+ sizeof(reboot_cmd));
+ if (r < 0)
+ msleep(wait_reboot[i]);
+ }
+ if (r < 0)
+ return r;
+
+ /* CLF is spending about 20ms to do an internal reboot */
+ msleep(20);
+ r = -1;
+ for (i = 0; i < ARRAY_SIZE(wait_reboot) && r < 0; i++) {
+ r = i2c_master_recv(phy->i2c_dev, tmp,
+ ST21NFCA_HCI_LLC_MAX_SIZE);
+ if (r < 0)
+ msleep(wait_reboot[i]);
+ }
+ if (r < 0)
+ return r;
+
+ for (i = 0; i < ST21NFCA_HCI_LLC_MAX_SIZE &&
+ tmp[i] == ST21NFCA_SOF_EOF; i++)
+ ;
+
+ if (r != ST21NFCA_HCI_LLC_MAX_SIZE)
+ return -ENODEV;
+
+ usleep_range(1000, 1500);
+ return 0;
+}
+
+static int st21nfca_hci_i2c_enable(void *phy_id)
+{
+ struct st21nfca_i2c_phy *phy = phy_id;
+
+ gpio_set_value(phy->gpio_ena, 1);
+ phy->powered = 1;
+ phy->run_mode = ST21NFCA_HCI_MODE;
+
+ usleep_range(10000, 15000);
+
+ return 0;
+}
+
+static void st21nfca_hci_i2c_disable(void *phy_id)
+{
+ struct st21nfca_i2c_phy *phy = phy_id;
+
+ pr_info("\n");
+ gpio_set_value(phy->gpio_ena, 0);
+
+ phy->powered = 0;
+}
+
+static void st21nfca_hci_add_len_crc(struct sk_buff *skb)
+{
+ u16 crc;
+ u8 tmp;
+
+ *skb_push(skb, 1) = 0;
+
+ crc = crc_ccitt(0xffff, skb->data, skb->len);
+ crc = ~crc;
+
+ tmp = crc & 0x00ff;
+ *skb_put(skb, 1) = tmp;
+
+ tmp = (crc >> 8) & 0x00ff;
+ *skb_put(skb, 1) = tmp;
+}
+
+static void st21nfca_hci_remove_len_crc(struct sk_buff *skb)
+{
+ skb_pull(skb, ST21NFCA_FRAME_HEADROOM);
+ skb_trim(skb, skb->len - ST21NFCA_FRAME_TAILROOM);
+}
+
+/*
+ * Writing a frame must not return the number of written bytes.
+ * It must return either zero for success, or <0 for error.
+ * In addition, it must not alter the skb
+ */
+static int st21nfca_hci_i2c_write(void *phy_id, struct sk_buff *skb)
+{
+ int r = -1, i, j;
+ struct st21nfca_i2c_phy *phy = phy_id;
+ struct i2c_client *client = phy->i2c_dev;
+ u8 tmp[ST21NFCA_HCI_LLC_MAX_SIZE * 2];
+
+ I2C_DUMP_SKB("st21nfca_hci_i2c_write", skb);
+
+
+ if (phy->hard_fault != 0)
+ return phy->hard_fault;
+
+ /*
+ * Compute CRC before byte stuffing computation on frame
+ * Note st21nfca_hci_add_len_crc is doing a byte stuffing
+ * on its own value
+ */
+ st21nfca_hci_add_len_crc(skb);
+
+ /* add ST21NFCA_SOF_EOF on tail */
+ *skb_put(skb, 1) = ST21NFCA_SOF_EOF;
+ /* add ST21NFCA_SOF_EOF on head */
+ *skb_push(skb, 1) = ST21NFCA_SOF_EOF;
+
+ /*
+ * Compute byte stuffing
+ * if byte == ST21NFCA_SOF_EOF or ST21NFCA_ESCAPE_BYTE_STUFFING
+ * insert ST21NFCA_ESCAPE_BYTE_STUFFING (escape byte)
+ * xor byte with ST21NFCA_BYTE_STUFFING_MASK
+ */
+ tmp[0] = skb->data[0];
+ for (i = 1, j = 1; i < skb->len - 1; i++, j++) {
+ if (skb->data[i] == ST21NFCA_SOF_EOF
+ || skb->data[i] == ST21NFCA_ESCAPE_BYTE_STUFFING) {
+ tmp[j] = ST21NFCA_ESCAPE_BYTE_STUFFING;
+ j++;
+ tmp[j] = skb->data[i] ^ ST21NFCA_BYTE_STUFFING_MASK;
+ } else {
+ tmp[j] = skb->data[i];
+ }
+ }
+ tmp[j] = skb->data[i];
+ j++;
+
+ /*
+ * Manage sleep mode
+ * Try 3 times to send data with delay between each
+ */
+ mutex_lock(&phy->phy_lock);
+ for (i = 0; i < ARRAY_SIZE(wait_tab) && r < 0; i++) {
+ r = i2c_master_send(client, tmp, j);
+ if (r < 0)
+ msleep(wait_tab[i]);
+ }
+ mutex_unlock(&phy->phy_lock);
+
+ if (r >= 0) {
+ if (r != j)
+ r = -EREMOTEIO;
+ else
+ r = 0;
+ }
+
+ st21nfca_hci_remove_len_crc(skb);
+
+ return r;
+}
+
+static int get_frame_size(u8 *buf, int buflen)
+{
+ int len = 0;
+
+ if (buf[len + 1] == ST21NFCA_SOF_EOF)
+ return 0;
+
+ for (len = 1; len < buflen && buf[len] != ST21NFCA_SOF_EOF; len++)
+ ;
+
+ return len;
+}
+
+static int check_crc(u8 *buf, int buflen)
+{
+ u16 crc;
+
+ crc = crc_ccitt(0xffff, buf, buflen - 2);
+ crc = ~crc;
+
+ if (buf[buflen - 2] != (crc & 0xff) || buf[buflen - 1] != (crc >> 8)) {
+ pr_err(ST21NFCA_HCI_DRIVER_NAME
+ ": CRC error 0x%x != 0x%x 0x%x\n", crc, buf[buflen - 1],
+ buf[buflen - 2]);
+
+ pr_info(DRIVER_DESC ": %s : BAD CRC\n", __func__);
+ print_hex_dump(KERN_DEBUG, "crc: ", DUMP_PREFIX_NONE,
+ 16, 2, buf, buflen, false);
+ return -EPERM;
+ }
+ return 0;
+}
+
+/*
+ * Prepare received data for upper layer.
+ * Received data include byte stuffing, crc and sof/eof
+ * which is not usable by hci part.
+ * returns:
+ * frame size without sof/eof, header and byte stuffing
+ * -EBADMSG : frame was incorrect and discarded
+ */
+static int st21nfca_hci_i2c_repack(struct sk_buff *skb)
+{
+ int i, j, r, size;
+
+ if (skb->len < 1 || (skb->len > 1 && skb->data[1] != 0))
+ return -EBADMSG;
+
+ size = get_frame_size(skb->data, skb->len);
+ if (size > 0) {
+ skb_trim(skb, size);
+ /* remove ST21NFCA byte stuffing for upper layer */
+ for (i = 1, j = 0; i < skb->len; i++) {
+ if (skb->data[i + j] ==
+ (u8) ST21NFCA_ESCAPE_BYTE_STUFFING) {
+ skb->data[i] = skb->data[i + j + 1]
+ | ST21NFCA_BYTE_STUFFING_MASK;
+ i++;
+ j++;
+ }
+ skb->data[i] = skb->data[i + j];
+ }
+ /* remove byte stuffing useless byte */
+ skb_trim(skb, i - j);
+ /* remove ST21NFCA_SOF_EOF from head */
+ skb_pull(skb, 1);
+
+ r = check_crc(skb->data, skb->len);
+ if (r != 0) {
+ i = 0;
+ return -EBADMSG;
+ }
+
+ /* remove headbyte */
+ skb_pull(skb, 1);
+ /* remove crc. Byte Stuffing is already removed here */
+ skb_trim(skb, skb->len - 2);
+ return skb->len;
+ }
+ return 0;
+}
+
+/*
+ * Reads an shdlc frame and returns it in a newly allocated sk_buff. Guarantees
+ * that i2c bus will be flushed and that next read will start on a new frame.
+ * returned skb contains only LLC header and payload.
+ * returns:
+ * frame size : if received frame is complete (find ST21NFCA_SOF_EOF at
+ * end of read)
+ * -EAGAIN : if received frame is incomplete (not find ST21NFCA_SOF_EOF
+ * at end of read)
+ * -EREMOTEIO : i2c read error (fatal)
+ * -EBADMSG : frame was incorrect and discarded
+ * (value returned from st21nfca_hci_i2c_repack)
+ * -EIO : if no ST21NFCA_SOF_EOF is found after reaching
+ * the read length end sequence
+ */
+static int st21nfca_hci_i2c_read(struct st21nfca_i2c_phy *phy,
+ struct sk_buff *skb)
+{
+ int r, i;
+ u8 len;
+ u8 buf[ST21NFCA_HCI_LLC_MAX_PAYLOAD];
+ struct i2c_client *client = phy->i2c_dev;
+
+ if (phy->current_read_len < ARRAY_SIZE(len_seq)) {
+ len = len_seq[phy->current_read_len];
+
+ /*
+ * Add retry mecanism
+ * Operation on I2C interface may fail in case of operation on
+ * RF or SWP interface
+ */
+ r = 0;
+ mutex_lock(&phy->phy_lock);
+ for (i = 0; i < ARRAY_SIZE(wait_tab) && r <= 0; i++) {
+ r = i2c_master_recv(client, buf, len);
+ if (r < 0)
+ msleep(wait_tab[i]);
+ }
+ mutex_unlock(&phy->phy_lock);
+
+ if (r != len) {
+ phy->current_read_len = 0;
+ return -EREMOTEIO;
+ }
+
+ /*
+ * The first read sequence does not start with SOF.
+ * Data is corrupeted so we drop it.
+ */
+ if (!phy->current_read_len && !IS_START_OF_FRAME(buf)) {
+ skb_trim(skb, 0);
+ phy->current_read_len = 0;
+ return -EIO;
+ } else if (phy->current_read_len && IS_START_OF_FRAME(buf)) {
+ /*
+ * Previous frame transmission was interrupted and
+ * the frame got repeated.
+ * Received frame start with ST21NFCA_SOF_EOF + 00.
+ */
+ skb_trim(skb, 0);
+ phy->current_read_len = 0;
+ }
+
+ memcpy(skb_put(skb, len), buf, len);
+
+ if (skb->data[skb->len - 1] == ST21NFCA_SOF_EOF) {
+ phy->current_read_len = 0;
+ return st21nfca_hci_i2c_repack(skb);
+ }
+ phy->current_read_len++;
+ return -EAGAIN;
+ }
+ return -EIO;
+}
+
+/*
+ * Reads an shdlc frame from the chip. This is not as straightforward as it
+ * seems. The frame format is data-crc, and corruption can occur anywhere
+ * while transiting on i2c bus, such that we could read an invalid data.
+ * The tricky case is when we read a corrupted data or crc. We must detect
+ * this here in order to determine that data can be transmitted to the hci
+ * core. This is the reason why we check the crc here.
+ * The CLF will repeat a frame until we send a RR on that frame.
+ *
+ * On ST21NFCA, IRQ goes in idle when read starts. As no size information are
+ * available in the incoming data, other IRQ might come. Every IRQ will trigger
+ * a read sequence with different length and will fill the current frame.
+ * The reception is complete once we reach a ST21NFCA_SOF_EOF.
+ */
+static irqreturn_t st21nfca_hci_irq_thread_fn(int irq, void *phy_id)
+{
+ struct st21nfca_i2c_phy *phy = phy_id;
+ struct i2c_client *client;
+
+ int r;
+
+ if (!phy || irq != phy->i2c_dev->irq) {
+ WARN_ON_ONCE(1);
+ return IRQ_NONE;
+ }
+
+ client = phy->i2c_dev;
+ dev_dbg(&client->dev, "IRQ\n");
+
+ if (phy->hard_fault != 0)
+ return IRQ_HANDLED;
+
+ r = st21nfca_hci_i2c_read(phy, phy->pending_skb);
+ if (r == -EREMOTEIO) {
+ phy->hard_fault = r;
+
+ nfc_hci_recv_frame(phy->hdev, NULL);
+
+ return IRQ_HANDLED;
+ } else if (r == -EAGAIN || r == -EIO) {
+ return IRQ_HANDLED;
+ } else if (r == -EBADMSG && phy->crc_trials < ARRAY_SIZE(wait_tab)) {
+ /*
+ * With ST21NFCA, only one interface (I2C, RF or SWP)
+ * may be active at a time.
+ * Having incorrect crc is usually due to i2c macrocell
+ * deactivation in the middle of a transmission.
+ * It may generate corrupted data on i2c.
+ * We give sometime to get i2c back.
+ * The complete frame will be repeated.
+ */
+ msleep(wait_tab[phy->crc_trials]);
+ phy->crc_trials++;
+ phy->current_read_len = 0;
+ kfree_skb(phy->pending_skb);
+ } else if (r > 0) {
+ /*
+ * We succeeded to read data from the CLF and
+ * data is valid.
+ * Reset counter.
+ */
+ nfc_hci_recv_frame(phy->hdev, phy->pending_skb);
+ phy->crc_trials = 0;
+ } else {
+ kfree_skb(phy->pending_skb);
+ }
+
+ phy->pending_skb = alloc_skb(ST21NFCA_HCI_LLC_MAX_SIZE * 2, GFP_KERNEL);
+ if (phy->pending_skb == NULL) {
+ phy->hard_fault = -ENOMEM;
+ nfc_hci_recv_frame(phy->hdev, NULL);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static struct nfc_phy_ops i2c_phy_ops = {
+ .write = st21nfca_hci_i2c_write,
+ .enable = st21nfca_hci_i2c_enable,
+ .disable = st21nfca_hci_i2c_disable,
+};
+
+#ifdef CONFIG_OF
+static int st21nfca_hci_i2c_of_request_resources(struct i2c_client *client)
+{
+ struct st21nfca_i2c_phy *phy = i2c_get_clientdata(client);
+ struct device_node *pp;
+ int gpio;
+ int r;
+
+ pp = client->dev.of_node;
+ if (!pp)
+ return -ENODEV;
+
+ /* Get GPIO from device tree */
+ gpio = of_get_named_gpio(pp, "enable-gpios", 0);
+ if (gpio < 0) {
+ nfc_err(&client->dev, "Failed to retrieve enable-gpios from device tree\n");
+ return gpio;
+ }
+
+ /* GPIO request and configuration */
+ r = devm_gpio_request_one(&client->dev, gpio, GPIOF_OUT_INIT_HIGH,
+ "clf_enable");
+ if (r) {
+ nfc_err(&client->dev, "Failed to request enable pin\n");
+ return r;
+ }
+
+ phy->gpio_ena = gpio;
+
+ phy->irq_polarity = irq_get_trigger_type(client->irq);
+
+ phy->se_status.is_ese_present =
+ of_property_read_bool(pp, "ese-present");
+ phy->se_status.is_uicc_present =
+ of_property_read_bool(pp, "uicc-present");
+
+ return 0;
+}
+#else
+static int st21nfca_hci_i2c_of_request_resources(struct i2c_client *client)
+{
+ return -ENODEV;
+}
+#endif
+
+static int st21nfca_hci_i2c_request_resources(struct i2c_client *client)
+{
+ struct st21nfca_nfc_platform_data *pdata;
+ struct st21nfca_i2c_phy *phy = i2c_get_clientdata(client);
+ int r;
+
+ pdata = client->dev.platform_data;
+ if (pdata == NULL) {
+ nfc_err(&client->dev, "No platform data\n");
+ return -EINVAL;
+ }
+
+ /* store for later use */
+ phy->gpio_ena = pdata->gpio_ena;
+ phy->irq_polarity = pdata->irq_polarity;
+
+ if (phy->gpio_ena > 0) {
+ r = devm_gpio_request_one(&client->dev, phy->gpio_ena,
+ GPIOF_OUT_INIT_HIGH, "clf_enable");
+ if (r) {
+ pr_err("%s : ena gpio_request failed\n", __FILE__);
+ return r;
+ }
+ }
+
+ phy->se_status.is_ese_present = pdata->is_ese_present;
+ phy->se_status.is_uicc_present = pdata->is_uicc_present;
+
+ return 0;
+}
+
+static int st21nfca_hci_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct st21nfca_i2c_phy *phy;
+ struct st21nfca_nfc_platform_data *pdata;
+ int r;
+
+ dev_dbg(&client->dev, "%s\n", __func__);
+ dev_dbg(&client->dev, "IRQ: %d\n", client->irq);
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+ nfc_err(&client->dev, "Need I2C_FUNC_I2C\n");
+ return -ENODEV;
+ }
+
+ phy = devm_kzalloc(&client->dev, sizeof(struct st21nfca_i2c_phy),
+ GFP_KERNEL);
+ if (!phy)
+ return -ENOMEM;
+
+ phy->i2c_dev = client;
+ phy->pending_skb = alloc_skb(ST21NFCA_HCI_LLC_MAX_SIZE * 2, GFP_KERNEL);
+ if (phy->pending_skb == NULL)
+ return -ENOMEM;
+
+ phy->current_read_len = 0;
+ phy->crc_trials = 0;
+ mutex_init(&phy->phy_lock);
+ i2c_set_clientdata(client, phy);
+
+ pdata = client->dev.platform_data;
+ if (!pdata && client->dev.of_node) {
+ r = st21nfca_hci_i2c_of_request_resources(client);
+ if (r) {
+ nfc_err(&client->dev, "No platform data\n");
+ return r;
+ }
+ } else if (pdata) {
+ r = st21nfca_hci_i2c_request_resources(client);
+ if (r) {
+ nfc_err(&client->dev, "Cannot get platform resources\n");
+ return r;
+ }
+ } else {
+ nfc_err(&client->dev, "st21nfca platform resources not available\n");
+ return -ENODEV;
+ }
+
+ r = st21nfca_hci_platform_init(phy);
+ if (r < 0) {
+ nfc_err(&client->dev, "Unable to reboot st21nfca\n");
+ return r;
+ }
+
+ r = devm_request_threaded_irq(&client->dev, client->irq, NULL,
+ st21nfca_hci_irq_thread_fn,
+ phy->irq_polarity | IRQF_ONESHOT,
+ ST21NFCA_HCI_DRIVER_NAME, phy);
+ if (r < 0) {
+ nfc_err(&client->dev, "Unable to register IRQ handler\n");
+ return r;
+ }
+
+ return st21nfca_hci_probe(phy, &i2c_phy_ops, LLC_SHDLC_NAME,
+ ST21NFCA_FRAME_HEADROOM,
+ ST21NFCA_FRAME_TAILROOM,
+ ST21NFCA_HCI_LLC_MAX_PAYLOAD,
+ &phy->hdev,
+ &phy->se_status);
+}
+
+static int st21nfca_hci_i2c_remove(struct i2c_client *client)
+{
+ struct st21nfca_i2c_phy *phy = i2c_get_clientdata(client);
+
+ dev_dbg(&client->dev, "%s\n", __func__);
+
+ st21nfca_hci_remove(phy->hdev);
+
+ if (phy->powered)
+ st21nfca_hci_i2c_disable(phy);
+
+ return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id of_st21nfca_i2c_match[] = {
+ { .compatible = "st,st21nfca-i2c", },
+ { .compatible = "st,st21nfca_i2c", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, of_st21nfca_i2c_match);
+#endif
+
+static struct i2c_driver st21nfca_hci_i2c_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = ST21NFCA_HCI_I2C_DRIVER_NAME,
+ .of_match_table = of_match_ptr(of_st21nfca_i2c_match),
+ },
+ .probe = st21nfca_hci_i2c_probe,
+ .id_table = st21nfca_hci_i2c_id_table,
+ .remove = st21nfca_hci_i2c_remove,
+};
+
+module_i2c_driver(st21nfca_hci_i2c_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION(DRIVER_DESC);