diff options
Diffstat (limited to 'kernel/drivers/net/wireless/zd1211rw/zd_mac.c')
| -rw-r--r-- | kernel/drivers/net/wireless/zd1211rw/zd_mac.c | 1550 |
1 files changed, 1550 insertions, 0 deletions
diff --git a/kernel/drivers/net/wireless/zd1211rw/zd_mac.c b/kernel/drivers/net/wireless/zd1211rw/zd_mac.c new file mode 100644 index 000000000..e7af261e9 --- /dev/null +++ b/kernel/drivers/net/wireless/zd1211rw/zd_mac.c @@ -0,0 +1,1550 @@ +/* ZD1211 USB-WLAN driver for Linux + * + * Copyright (C) 2005-2007 Ulrich Kunitz <kune@deine-taler.de> + * Copyright (C) 2006-2007 Daniel Drake <dsd@gentoo.org> + * Copyright (C) 2006-2007 Michael Wu <flamingice@sourmilk.net> + * Copyright (C) 2007-2008 Luis R. Rodriguez <mcgrof@winlab.rutgers.edu> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/slab.h> +#include <linux/usb.h> +#include <linux/jiffies.h> +#include <net/ieee80211_radiotap.h> + +#include "zd_def.h" +#include "zd_chip.h" +#include "zd_mac.h" +#include "zd_rf.h" + +struct zd_reg_alpha2_map { + u32 reg; + char alpha2[2]; +}; + +static struct zd_reg_alpha2_map reg_alpha2_map[] = { + { ZD_REGDOMAIN_FCC, "US" }, + { ZD_REGDOMAIN_IC, "CA" }, + { ZD_REGDOMAIN_ETSI, "DE" }, /* Generic ETSI, use most restrictive */ + { ZD_REGDOMAIN_JAPAN, "JP" }, + { ZD_REGDOMAIN_JAPAN_2, "JP" }, + { ZD_REGDOMAIN_JAPAN_3, "JP" }, + { ZD_REGDOMAIN_SPAIN, "ES" }, + { ZD_REGDOMAIN_FRANCE, "FR" }, +}; + +/* This table contains the hardware specific values for the modulation rates. */ +static const struct ieee80211_rate zd_rates[] = { + { .bitrate = 10, + .hw_value = ZD_CCK_RATE_1M, }, + { .bitrate = 20, + .hw_value = ZD_CCK_RATE_2M, + .hw_value_short = ZD_CCK_RATE_2M | ZD_CCK_PREA_SHORT, + .flags = IEEE80211_RATE_SHORT_PREAMBLE }, + { .bitrate = 55, + .hw_value = ZD_CCK_RATE_5_5M, + .hw_value_short = ZD_CCK_RATE_5_5M | ZD_CCK_PREA_SHORT, + .flags = IEEE80211_RATE_SHORT_PREAMBLE }, + { .bitrate = 110, + .hw_value = ZD_CCK_RATE_11M, + .hw_value_short = ZD_CCK_RATE_11M | ZD_CCK_PREA_SHORT, + .flags = IEEE80211_RATE_SHORT_PREAMBLE }, + { .bitrate = 60, + .hw_value = ZD_OFDM_RATE_6M, + .flags = 0 }, + { .bitrate = 90, + .hw_value = ZD_OFDM_RATE_9M, + .flags = 0 }, + { .bitrate = 120, + .hw_value = ZD_OFDM_RATE_12M, + .flags = 0 }, + { .bitrate = 180, + .hw_value = ZD_OFDM_RATE_18M, + .flags = 0 }, + { .bitrate = 240, + .hw_value = ZD_OFDM_RATE_24M, + .flags = 0 }, + { .bitrate = 360, + .hw_value = ZD_OFDM_RATE_36M, + .flags = 0 }, + { .bitrate = 480, + .hw_value = ZD_OFDM_RATE_48M, + .flags = 0 }, + { .bitrate = 540, + .hw_value = ZD_OFDM_RATE_54M, + .flags = 0 }, +}; + +/* + * Zydas retry rates table. Each line is listed in the same order as + * in zd_rates[] and contains all the rate used when a packet is sent + * starting with a given rates. Let's consider an example : + * + * "11 Mbits : 4, 3, 2, 1, 0" means : + * - packet is sent using 4 different rates + * - 1st rate is index 3 (ie 11 Mbits) + * - 2nd rate is index 2 (ie 5.5 Mbits) + * - 3rd rate is index 1 (ie 2 Mbits) + * - 4th rate is index 0 (ie 1 Mbits) + */ + +static const struct tx_retry_rate zd_retry_rates[] = { + { /* 1 Mbits */ 1, { 0 }}, + { /* 2 Mbits */ 2, { 1, 0 }}, + { /* 5.5 Mbits */ 3, { 2, 1, 0 }}, + { /* 11 Mbits */ 4, { 3, 2, 1, 0 }}, + { /* 6 Mbits */ 5, { 4, 3, 2, 1, 0 }}, + { /* 9 Mbits */ 6, { 5, 4, 3, 2, 1, 0}}, + { /* 12 Mbits */ 5, { 6, 3, 2, 1, 0 }}, + { /* 18 Mbits */ 6, { 7, 6, 3, 2, 1, 0 }}, + { /* 24 Mbits */ 6, { 8, 6, 3, 2, 1, 0 }}, + { /* 36 Mbits */ 7, { 9, 8, 6, 3, 2, 1, 0 }}, + { /* 48 Mbits */ 8, {10, 9, 8, 6, 3, 2, 1, 0 }}, + { /* 54 Mbits */ 9, {11, 10, 9, 8, 6, 3, 2, 1, 0 }} +}; + +static const struct ieee80211_channel zd_channels[] = { + { .center_freq = 2412, .hw_value = 1 }, + { .center_freq = 2417, .hw_value = 2 }, + { .center_freq = 2422, .hw_value = 3 }, + { .center_freq = 2427, .hw_value = 4 }, + { .center_freq = 2432, .hw_value = 5 }, + { .center_freq = 2437, .hw_value = 6 }, + { .center_freq = 2442, .hw_value = 7 }, + { .center_freq = 2447, .hw_value = 8 }, + { .center_freq = 2452, .hw_value = 9 }, + { .center_freq = 2457, .hw_value = 10 }, + { .center_freq = 2462, .hw_value = 11 }, + { .center_freq = 2467, .hw_value = 12 }, + { .center_freq = 2472, .hw_value = 13 }, + { .center_freq = 2484, .hw_value = 14 }, +}; + +static void housekeeping_init(struct zd_mac *mac); +static void housekeeping_enable(struct zd_mac *mac); +static void housekeeping_disable(struct zd_mac *mac); +static void beacon_init(struct zd_mac *mac); +static void beacon_enable(struct zd_mac *mac); +static void beacon_disable(struct zd_mac *mac); +static void set_rts_cts(struct zd_mac *mac, unsigned int short_preamble); +static int zd_mac_config_beacon(struct ieee80211_hw *hw, + struct sk_buff *beacon, bool in_intr); + +static int zd_reg2alpha2(u8 regdomain, char *alpha2) +{ + unsigned int i; + struct zd_reg_alpha2_map *reg_map; + for (i = 0; i < ARRAY_SIZE(reg_alpha2_map); i++) { + reg_map = ®_alpha2_map[i]; + if (regdomain == reg_map->reg) { + alpha2[0] = reg_map->alpha2[0]; + alpha2[1] = reg_map->alpha2[1]; + return 0; + } + } + return 1; +} + +static int zd_check_signal(struct ieee80211_hw *hw, int signal) +{ + struct zd_mac *mac = zd_hw_mac(hw); + + dev_dbg_f_cond(zd_mac_dev(mac), signal < 0 || signal > 100, + "%s: signal value from device not in range 0..100, " + "but %d.\n", __func__, signal); + + if (signal < 0) + signal = 0; + else if (signal > 100) + signal = 100; + + return signal; +} + +int zd_mac_preinit_hw(struct ieee80211_hw *hw) +{ + int r; + u8 addr[ETH_ALEN]; + struct zd_mac *mac = zd_hw_mac(hw); + + r = zd_chip_read_mac_addr_fw(&mac->chip, addr); + if (r) + return r; + + SET_IEEE80211_PERM_ADDR(hw, addr); + + return 0; +} + +int zd_mac_init_hw(struct ieee80211_hw *hw) +{ + int r; + struct zd_mac *mac = zd_hw_mac(hw); + struct zd_chip *chip = &mac->chip; + char alpha2[2]; + u8 default_regdomain; + + r = zd_chip_enable_int(chip); + if (r) + goto out; + r = zd_chip_init_hw(chip); + if (r) + goto disable_int; + + ZD_ASSERT(!irqs_disabled()); + + r = zd_read_regdomain(chip, &default_regdomain); + if (r) + goto disable_int; + spin_lock_irq(&mac->lock); + mac->regdomain = mac->default_regdomain = default_regdomain; + spin_unlock_irq(&mac->lock); + + /* We must inform the device that we are doing encryption/decryption in + * software at the moment. */ + r = zd_set_encryption_type(chip, ENC_SNIFFER); + if (r) + goto disable_int; + + r = zd_reg2alpha2(mac->regdomain, alpha2); + if (r) + goto disable_int; + + r = regulatory_hint(hw->wiphy, alpha2); +disable_int: + zd_chip_disable_int(chip); +out: + return r; +} + +void zd_mac_clear(struct zd_mac *mac) +{ + flush_workqueue(zd_workqueue); + zd_chip_clear(&mac->chip); + ZD_ASSERT(!spin_is_locked(&mac->lock)); + ZD_MEMCLEAR(mac, sizeof(struct zd_mac)); +} + +static int set_rx_filter(struct zd_mac *mac) +{ + unsigned long flags; + u32 filter = STA_RX_FILTER; + + spin_lock_irqsave(&mac->lock, flags); + if (mac->pass_ctrl) + filter |= RX_FILTER_CTRL; + spin_unlock_irqrestore(&mac->lock, flags); + + return zd_iowrite32(&mac->chip, CR_RX_FILTER, filter); +} + +static int set_mac_and_bssid(struct zd_mac *mac) +{ + int r; + + if (!mac->vif) + return -1; + + r = zd_write_mac_addr(&mac->chip, mac->vif->addr); + if (r) + return r; + + /* Vendor driver after setting MAC either sets BSSID for AP or + * filter for other modes. + */ + if (mac->type != NL80211_IFTYPE_AP) + return set_rx_filter(mac); + else + return zd_write_bssid(&mac->chip, mac->vif->addr); +} + +static int set_mc_hash(struct zd_mac *mac) +{ + struct zd_mc_hash hash; + zd_mc_clear(&hash); + return zd_chip_set_multicast_hash(&mac->chip, &hash); +} + +int zd_op_start(struct ieee80211_hw *hw) +{ + struct zd_mac *mac = zd_hw_mac(hw); + struct zd_chip *chip = &mac->chip; + struct zd_usb *usb = &chip->usb; + int r; + + if (!usb->initialized) { + r = zd_usb_init_hw(usb); + if (r) + goto out; + } + + r = zd_chip_enable_int(chip); + if (r < 0) + goto out; + + r = zd_chip_set_basic_rates(chip, CR_RATES_80211B | CR_RATES_80211G); + if (r < 0) + goto disable_int; + r = set_rx_filter(mac); + if (r) + goto disable_int; + r = set_mc_hash(mac); + if (r) + goto disable_int; + + /* Wait after setting the multicast hash table and powering on + * the radio otherwise interface bring up will fail. This matches + * what the vendor driver did. + */ + msleep(10); + + r = zd_chip_switch_radio_on(chip); + if (r < 0) { + dev_err(zd_chip_dev(chip), + "%s: failed to set radio on\n", __func__); + goto disable_int; + } + r = zd_chip_enable_rxtx(chip); + if (r < 0) + goto disable_radio; + r = zd_chip_enable_hwint(chip); + if (r < 0) + goto disable_rxtx; + + housekeeping_enable(mac); + beacon_enable(mac); + set_bit(ZD_DEVICE_RUNNING, &mac->flags); + return 0; +disable_rxtx: + zd_chip_disable_rxtx(chip); +disable_radio: + zd_chip_switch_radio_off(chip); +disable_int: + zd_chip_disable_int(chip); +out: + return r; +} + +void zd_op_stop(struct ieee80211_hw *hw) +{ + struct zd_mac *mac = zd_hw_mac(hw); + struct zd_chip *chip = &mac->chip; + struct sk_buff *skb; + struct sk_buff_head *ack_wait_queue = &mac->ack_wait_queue; + + clear_bit(ZD_DEVICE_RUNNING, &mac->flags); + + /* The order here deliberately is a little different from the open() + * method, since we need to make sure there is no opportunity for RX + * frames to be processed by mac80211 after we have stopped it. + */ + + zd_chip_disable_rxtx(chip); + beacon_disable(mac); + housekeeping_disable(mac); + flush_workqueue(zd_workqueue); + + zd_chip_disable_hwint(chip); + zd_chip_switch_radio_off(chip); + zd_chip_disable_int(chip); + + + while ((skb = skb_dequeue(ack_wait_queue))) + dev_kfree_skb_any(skb); +} + +int zd_restore_settings(struct zd_mac *mac) +{ + struct sk_buff *beacon; + struct zd_mc_hash multicast_hash; + unsigned int short_preamble; + int r, beacon_interval, beacon_period; + u8 channel; + + dev_dbg_f(zd_mac_dev(mac), "\n"); + + spin_lock_irq(&mac->lock); + multicast_hash = mac->multicast_hash; + short_preamble = mac->short_preamble; + beacon_interval = mac->beacon.interval; + beacon_period = mac->beacon.period; + channel = mac->channel; + spin_unlock_irq(&mac->lock); + + r = set_mac_and_bssid(mac); + if (r < 0) { + dev_dbg_f(zd_mac_dev(mac), "set_mac_and_bssid failed, %d\n", r); + return r; + } + + r = zd_chip_set_channel(&mac->chip, channel); + if (r < 0) { + dev_dbg_f(zd_mac_dev(mac), "zd_chip_set_channel failed, %d\n", + r); + return r; + } + + set_rts_cts(mac, short_preamble); + + r = zd_chip_set_multicast_hash(&mac->chip, &multicast_hash); + if (r < 0) { + dev_dbg_f(zd_mac_dev(mac), + "zd_chip_set_multicast_hash failed, %d\n", r); + return r; + } + + if (mac->type == NL80211_IFTYPE_MESH_POINT || + mac->type == NL80211_IFTYPE_ADHOC || + mac->type == NL80211_IFTYPE_AP) { + if (mac->vif != NULL) { + beacon = ieee80211_beacon_get(mac->hw, mac->vif); + if (beacon) + zd_mac_config_beacon(mac->hw, beacon, false); + } + + zd_set_beacon_interval(&mac->chip, beacon_interval, + beacon_period, mac->type); + + spin_lock_irq(&mac->lock); + mac->beacon.last_update = jiffies; + spin_unlock_irq(&mac->lock); + } + + return 0; +} + +/** + * zd_mac_tx_status - reports tx status of a packet if required + * @hw - a &struct ieee80211_hw pointer + * @skb - a sk-buffer + * @flags: extra flags to set in the TX status info + * @ackssi: ACK signal strength + * @success - True for successful transmission of the frame + * + * This information calls ieee80211_tx_status_irqsafe() if required by the + * control information. It copies the control information into the status + * information. + * + * If no status information has been requested, the skb is freed. + */ +static void zd_mac_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb, + int ackssi, struct tx_status *tx_status) +{ + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + int i; + int success = 1, retry = 1; + int first_idx; + const struct tx_retry_rate *retries; + + ieee80211_tx_info_clear_status(info); + + if (tx_status) { + success = !tx_status->failure; + retry = tx_status->retry + success; + } + + if (success) { + /* success */ + info->flags |= IEEE80211_TX_STAT_ACK; + } else { + /* failure */ + info->flags &= ~IEEE80211_TX_STAT_ACK; + } + + first_idx = info->status.rates[0].idx; + ZD_ASSERT(0<=first_idx && first_idx<ARRAY_SIZE(zd_retry_rates)); + retries = &zd_retry_rates[first_idx]; + ZD_ASSERT(1 <= retry && retry <= retries->count); + + info->status.rates[0].idx = retries->rate[0]; + info->status.rates[0].count = 1; // (retry > 1 ? 2 : 1); + + for (i=1; i<IEEE80211_TX_MAX_RATES-1 && i<retry; i++) { + info->status.rates[i].idx = retries->rate[i]; + info->status.rates[i].count = 1; // ((i==retry-1) && success ? 1:2); + } + for (; i<IEEE80211_TX_MAX_RATES && i<retry; i++) { + info->status.rates[i].idx = retries->rate[retry - 1]; + info->status.rates[i].count = 1; // (success ? 1:2); + } + if (i<IEEE80211_TX_MAX_RATES) + info->status.rates[i].idx = -1; /* terminate */ + + info->status.ack_signal = zd_check_signal(hw, ackssi); + ieee80211_tx_status_irqsafe(hw, skb); +} + +/** + * zd_mac_tx_failed - callback for failed frames + * @dev: the mac80211 wireless device + * + * This function is called if a frame couldn't be successfully + * transferred. The first frame from the tx queue, will be selected and + * reported as error to the upper layers. + */ +void zd_mac_tx_failed(struct urb *urb) +{ + struct ieee80211_hw * hw = zd_usb_to_hw(urb->context); + struct zd_mac *mac = zd_hw_mac(hw); + struct sk_buff_head *q = &mac->ack_wait_queue; + struct sk_buff *skb; + struct tx_status *tx_status = (struct tx_status *)urb->transfer_buffer; + unsigned long flags; + int success = !tx_status->failure; + int retry = tx_status->retry + success; + int found = 0; + int i, position = 0; + + q = &mac->ack_wait_queue; + spin_lock_irqsave(&q->lock, flags); + + skb_queue_walk(q, skb) { + struct ieee80211_hdr *tx_hdr; + struct ieee80211_tx_info *info; + int first_idx, final_idx; + const struct tx_retry_rate *retries; + u8 final_rate; + + position ++; + + /* if the hardware reports a failure and we had a 802.11 ACK + * pending, then we skip the first skb when searching for a + * matching frame */ + if (tx_status->failure && mac->ack_pending && + skb_queue_is_first(q, skb)) { + continue; + } + + tx_hdr = (struct ieee80211_hdr *)skb->data; + + /* we skip all frames not matching the reported destination */ + if (unlikely(!ether_addr_equal(tx_hdr->addr1, tx_status->mac))) + continue; + + /* we skip all frames not matching the reported final rate */ + + info = IEEE80211_SKB_CB(skb); + first_idx = info->status.rates[0].idx; + ZD_ASSERT(0<=first_idx && first_idx<ARRAY_SIZE(zd_retry_rates)); + retries = &zd_retry_rates[first_idx]; + if (retry <= 0 || retry > retries->count) + continue; + + final_idx = retries->rate[retry - 1]; + final_rate = zd_rates[final_idx].hw_value; + + if (final_rate != tx_status->rate) { + continue; + } + + found = 1; + break; + } + + if (found) { + for (i=1; i<=position; i++) { + skb = __skb_dequeue(q); + zd_mac_tx_status(hw, skb, + mac->ack_pending ? mac->ack_signal : 0, + i == position ? tx_status : NULL); + mac->ack_pending = 0; + } + } + + spin_unlock_irqrestore(&q->lock, flags); +} + +/** + * zd_mac_tx_to_dev - callback for USB layer + * @skb: a &sk_buff pointer + * @error: error value, 0 if transmission successful + * + * Informs the MAC layer that the frame has successfully transferred to the + * device. If an ACK is required and the transfer to the device has been + * successful, the packets are put on the @ack_wait_queue with + * the control set removed. + */ +void zd_mac_tx_to_dev(struct sk_buff *skb, int error) +{ + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + struct ieee80211_hw *hw = info->rate_driver_data[0]; + struct zd_mac *mac = zd_hw_mac(hw); + + ieee80211_tx_info_clear_status(info); + + skb_pull(skb, sizeof(struct zd_ctrlset)); + if (unlikely(error || + (info->flags & IEEE80211_TX_CTL_NO_ACK))) { + /* + * FIXME : do we need to fill in anything ? + */ + ieee80211_tx_status_irqsafe(hw, skb); + } else { + struct sk_buff_head *q = &mac->ack_wait_queue; + + skb_queue_tail(q, skb); + while (skb_queue_len(q) > ZD_MAC_MAX_ACK_WAITERS) { + zd_mac_tx_status(hw, skb_dequeue(q), + mac->ack_pending ? mac->ack_signal : 0, + NULL); + mac->ack_pending = 0; + } + } +} + +static int zd_calc_tx_length_us(u8 *service, u8 zd_rate, u16 tx_length) +{ + /* ZD_PURE_RATE() must be used to remove the modulation type flag of + * the zd-rate values. + */ + static const u8 rate_divisor[] = { + [ZD_PURE_RATE(ZD_CCK_RATE_1M)] = 1, + [ZD_PURE_RATE(ZD_CCK_RATE_2M)] = 2, + /* Bits must be doubled. */ + [ZD_PURE_RATE(ZD_CCK_RATE_5_5M)] = 11, + [ZD_PURE_RATE(ZD_CCK_RATE_11M)] = 11, + [ZD_PURE_RATE(ZD_OFDM_RATE_6M)] = 6, + [ZD_PURE_RATE(ZD_OFDM_RATE_9M)] = 9, + [ZD_PURE_RATE(ZD_OFDM_RATE_12M)] = 12, + [ZD_PURE_RATE(ZD_OFDM_RATE_18M)] = 18, + [ZD_PURE_RATE(ZD_OFDM_RATE_24M)] = 24, + [ZD_PURE_RATE(ZD_OFDM_RATE_36M)] = 36, + [ZD_PURE_RATE(ZD_OFDM_RATE_48M)] = 48, + [ZD_PURE_RATE(ZD_OFDM_RATE_54M)] = 54, + }; + + u32 bits = (u32)tx_length * 8; + u32 divisor; + + divisor = rate_divisor[ZD_PURE_RATE(zd_rate)]; + if (divisor == 0) + return -EINVAL; + + switch (zd_rate) { + case ZD_CCK_RATE_5_5M: + bits = (2*bits) + 10; /* round up to the next integer */ + break; + case ZD_CCK_RATE_11M: + if (service) { + u32 t = bits % 11; + *service &= ~ZD_PLCP_SERVICE_LENGTH_EXTENSION; + if (0 < t && t <= 3) { + *service |= ZD_PLCP_SERVICE_LENGTH_EXTENSION; + } + } + bits += 10; /* round up to the next integer */ + break; + } + + return bits/divisor; +} + +static void cs_set_control(struct zd_mac *mac, struct zd_ctrlset *cs, + struct ieee80211_hdr *header, + struct ieee80211_tx_info *info) +{ + /* + * CONTROL TODO: + * - if backoff needed, enable bit 0 + * - if burst (backoff not needed) disable bit 0 + */ + + cs->control = 0; + + /* First fragment */ + if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT) + cs->control |= ZD_CS_NEED_RANDOM_BACKOFF; + + /* No ACK expected (multicast, etc.) */ + if (info->flags & IEEE80211_TX_CTL_NO_ACK) + cs->control |= ZD_CS_NO_ACK; + + /* PS-POLL */ + if (ieee80211_is_pspoll(header->frame_control)) + cs->control |= ZD_CS_PS_POLL_FRAME; + + if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) + cs->control |= ZD_CS_RTS; + + if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) + cs->control |= ZD_CS_SELF_CTS; + + /* FIXME: Management frame? */ +} + +static bool zd_mac_match_cur_beacon(struct zd_mac *mac, struct sk_buff *beacon) +{ + if (!mac->beacon.cur_beacon) + return false; + + if (mac->beacon.cur_beacon->len != beacon->len) + return false; + + return !memcmp(beacon->data, mac->beacon.cur_beacon->data, beacon->len); +} + +static void zd_mac_free_cur_beacon_locked(struct zd_mac *mac) +{ + ZD_ASSERT(mutex_is_locked(&mac->chip.mutex)); + + kfree_skb(mac->beacon.cur_beacon); + mac->beacon.cur_beacon = NULL; +} + +static void zd_mac_free_cur_beacon(struct zd_mac *mac) +{ + mutex_lock(&mac->chip.mutex); + zd_mac_free_cur_beacon_locked(mac); + mutex_unlock(&mac->chip.mutex); +} + +static int zd_mac_config_beacon(struct ieee80211_hw *hw, struct sk_buff *beacon, + bool in_intr) +{ + struct zd_mac *mac = zd_hw_mac(hw); + int r, ret, num_cmds, req_pos = 0; + u32 tmp, j = 0; + /* 4 more bytes for tail CRC */ + u32 full_len = beacon->len + 4; + unsigned long end_jiffies, message_jiffies; + struct zd_ioreq32 *ioreqs; + + mutex_lock(&mac->chip.mutex); + + /* Check if hw already has this beacon. */ + if (zd_mac_match_cur_beacon(mac, beacon)) { + r = 0; + goto out_nofree; + } + + /* Alloc memory for full beacon write at once. */ + num_cmds = 1 + zd_chip_is_zd1211b(&mac->chip) + full_len; + ioreqs = kmalloc(num_cmds * sizeof(struct zd_ioreq32), GFP_KERNEL); + if (!ioreqs) { + r = -ENOMEM; + goto out_nofree; + } + + r = zd_iowrite32_locked(&mac->chip, 0, CR_BCN_FIFO_SEMAPHORE); + if (r < 0) + goto out; + r = zd_ioread32_locked(&mac->chip, &tmp, CR_BCN_FIFO_SEMAPHORE); + if (r < 0) + goto release_sema; + if (in_intr && tmp & 0x2) { + r = -EBUSY; + goto release_sema; + } + + end_jiffies = jiffies + HZ / 2; /*~500ms*/ + message_jiffies = jiffies + HZ / 10; /*~100ms*/ + while (tmp & 0x2) { + r = zd_ioread32_locked(&mac->chip, &tmp, CR_BCN_FIFO_SEMAPHORE); + if (r < 0) + goto release_sema; + if (time_is_before_eq_jiffies(message_jiffies)) { + message_jiffies = jiffies + HZ / 10; + dev_err(zd_mac_dev(mac), + "CR_BCN_FIFO_SEMAPHORE not ready\n"); + if (time_is_before_eq_jiffies(end_jiffies)) { + dev_err(zd_mac_dev(mac), + "Giving up beacon config.\n"); + r = -ETIMEDOUT; + goto reset_device; + } + } + msleep(20); + } + + ioreqs[req_pos].addr = CR_BCN_FIFO; + ioreqs[req_pos].value = full_len - 1; + req_pos++; + if (zd_chip_is_zd1211b(&mac->chip)) { + ioreqs[req_pos].addr = CR_BCN_LENGTH; + ioreqs[req_pos].value = full_len - 1; + req_pos++; + } + + for (j = 0 ; j < beacon->len; j++) { + ioreqs[req_pos].addr = CR_BCN_FIFO; + ioreqs[req_pos].value = *((u8 *)(beacon->data + j)); + req_pos++; + } + + for (j = 0; j < 4; j++) { + ioreqs[req_pos].addr = CR_BCN_FIFO; + ioreqs[req_pos].value = 0x0; + req_pos++; + } + + BUG_ON(req_pos != num_cmds); + + r = zd_iowrite32a_locked(&mac->chip, ioreqs, num_cmds); + +release_sema: + /* + * Try very hard to release device beacon semaphore, as otherwise + * device/driver can be left in unusable state. + */ + end_jiffies = jiffies + HZ / 2; /*~500ms*/ + ret = zd_iowrite32_locked(&mac->chip, 1, CR_BCN_FIFO_SEMAPHORE); + while (ret < 0) { + if (in_intr || time_is_before_eq_jiffies(end_jiffies)) { + ret = -ETIMEDOUT; + break; + } + + msleep(20); + ret = zd_iowrite32_locked(&mac->chip, 1, CR_BCN_FIFO_SEMAPHORE); + } + + if (ret < 0) + dev_err(zd_mac_dev(mac), "Could not release " + "CR_BCN_FIFO_SEMAPHORE!\n"); + if (r < 0 || ret < 0) { + if (r >= 0) + r = ret; + + /* We don't know if beacon was written successfully or not, + * so clear current. */ + zd_mac_free_cur_beacon_locked(mac); + + goto out; + } + + /* Beacon has now been written successfully, update current. */ + zd_mac_free_cur_beacon_locked(mac); + mac->beacon.cur_beacon = beacon; + beacon = NULL; + + /* 802.11b/g 2.4G CCK 1Mb + * 802.11a, not yet implemented, uses different values (see GPL vendor + * driver) + */ + r = zd_iowrite32_locked(&mac->chip, 0x00000400 | (full_len << 19), + CR_BCN_PLCP_CFG); +out: + kfree(ioreqs); +out_nofree: + kfree_skb(beacon); + mutex_unlock(&mac->chip.mutex); + + return r; + +reset_device: + zd_mac_free_cur_beacon_locked(mac); + kfree_skb(beacon); + + mutex_unlock(&mac->chip.mutex); + kfree(ioreqs); + + /* semaphore stuck, reset device to avoid fw freeze later */ + dev_warn(zd_mac_dev(mac), "CR_BCN_FIFO_SEMAPHORE stuck, " + "resetting device..."); + usb_queue_reset_device(mac->chip.usb.intf); + + return r; +} + +static int fill_ctrlset(struct zd_mac *mac, + struct sk_buff *skb) +{ + int r; + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + unsigned int frag_len = skb->len + FCS_LEN; + unsigned int packet_length; + struct ieee80211_rate *txrate; + struct zd_ctrlset *cs = (struct zd_ctrlset *) + skb_push(skb, sizeof(struct zd_ctrlset)); + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + + ZD_ASSERT(frag_len <= 0xffff); + + /* + * Firmware computes the duration itself (for all frames except PSPoll) + * and needs the field set to 0 at input, otherwise firmware messes up + * duration_id and sets bits 14 and 15 on. + */ + if (!ieee80211_is_pspoll(hdr->frame_control)) + hdr->duration_id = 0; + + txrate = ieee80211_get_tx_rate(mac->hw, info); + + cs->modulation = txrate->hw_value; + if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) + cs->modulation = txrate->hw_value_short; + + cs->tx_length = cpu_to_le16(frag_len); + + cs_set_control(mac, cs, hdr, info); + + packet_length = frag_len + sizeof(struct zd_ctrlset) + 10; + ZD_ASSERT(packet_length <= 0xffff); + /* ZD1211B: Computing the length difference this way, gives us + * flexibility to compute the packet length. + */ + cs->packet_length = cpu_to_le16(zd_chip_is_zd1211b(&mac->chip) ? + packet_length - frag_len : packet_length); + + /* + * CURRENT LENGTH: + * - transmit frame length in microseconds + * - seems to be derived from frame length + * - see Cal_Us_Service() in zdinlinef.h + * - if macp->bTxBurstEnable is enabled, then multiply by 4 + * - bTxBurstEnable is never set in the vendor driver + * + * SERVICE: + * - "for PLCP configuration" + * - always 0 except in some situations at 802.11b 11M + * - see line 53 of zdinlinef.h + */ + cs->service = 0; + r = zd_calc_tx_length_us(&cs->service, ZD_RATE(cs->modulation), + le16_to_cpu(cs->tx_length)); + if (r < 0) + return r; + cs->current_length = cpu_to_le16(r); + cs->next_frame_length = 0; + + return 0; +} + +/** + * zd_op_tx - transmits a network frame to the device + * + * @dev: mac80211 hardware device + * @skb: socket buffer + * @control: the control structure + * + * This function transmit an IEEE 802.11 network frame to the device. The + * control block of the skbuff will be initialized. If necessary the incoming + * mac80211 queues will be stopped. + */ +static void zd_op_tx(struct ieee80211_hw *hw, + struct ieee80211_tx_control *control, + struct sk_buff *skb) +{ + struct zd_mac *mac = zd_hw_mac(hw); + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + int r; + + r = fill_ctrlset(mac, skb); + if (r) + goto fail; + + info->rate_driver_data[0] = hw; + + r = zd_usb_tx(&mac->chip.usb, skb); + if (r) + goto fail; + return; + +fail: + dev_kfree_skb(skb); +} + +/** + * filter_ack - filters incoming packets for acknowledgements + * @dev: the mac80211 device + * @rx_hdr: received header + * @stats: the status for the received packet + * + * This functions looks for ACK packets and tries to match them with the + * frames in the tx queue. If a match is found the frame will be dequeued and + * the upper layers is informed about the successful transmission. If + * mac80211 queues have been stopped and the number of frames still to be + * transmitted is low the queues will be opened again. + * + * Returns 1 if the frame was an ACK, 0 if it was ignored. + */ +static int filter_ack(struct ieee80211_hw *hw, struct ieee80211_hdr *rx_hdr, + struct ieee80211_rx_status *stats) +{ + struct zd_mac *mac = zd_hw_mac(hw); + struct sk_buff *skb; + struct sk_buff_head *q; + unsigned long flags; + int found = 0; + int i, position = 0; + + if (!ieee80211_is_ack(rx_hdr->frame_control)) + return 0; + + q = &mac->ack_wait_queue; + spin_lock_irqsave(&q->lock, flags); + skb_queue_walk(q, skb) { + struct ieee80211_hdr *tx_hdr; + + position ++; + + if (mac->ack_pending && skb_queue_is_first(q, skb)) + continue; + + tx_hdr = (struct ieee80211_hdr *)skb->data; + if (likely(ether_addr_equal(tx_hdr->addr2, rx_hdr->addr1))) + { + found = 1; + break; + } + } + + if (found) { + for (i=1; i<position; i++) { + skb = __skb_dequeue(q); + zd_mac_tx_status(hw, skb, + mac->ack_pending ? mac->ack_signal : 0, + NULL); + mac->ack_pending = 0; + } + + mac->ack_pending = 1; + mac->ack_signal = stats->signal; + + /* Prevent pending tx-packet on AP-mode */ + if (mac->type == NL80211_IFTYPE_AP) { + skb = __skb_dequeue(q); + zd_mac_tx_status(hw, skb, mac->ack_signal, NULL); + mac->ack_pending = 0; + } + } + + spin_unlock_irqrestore(&q->lock, flags); + return 1; +} + +int zd_mac_rx(struct ieee80211_hw *hw, const u8 *buffer, unsigned int length) +{ + struct zd_mac *mac = zd_hw_mac(hw); + struct ieee80211_rx_status stats; + const struct rx_status *status; + struct sk_buff *skb; + int bad_frame = 0; + __le16 fc; + int need_padding; + int i; + u8 rate; + + if (length < ZD_PLCP_HEADER_SIZE + 10 /* IEEE80211_1ADDR_LEN */ + + FCS_LEN + sizeof(struct rx_status)) + return -EINVAL; + + memset(&stats, 0, sizeof(stats)); + + /* Note about pass_failed_fcs and pass_ctrl access below: + * mac locking intentionally omitted here, as this is the only unlocked + * reader and the only writer is configure_filter. Plus, if there were + * any races accessing these variables, it wouldn't really matter. + * If mac80211 ever provides a way for us to access filter flags + * from outside configure_filter, we could improve on this. Also, this + * situation may change once we implement some kind of DMA-into-skb + * RX path. */ + + /* Caller has to ensure that length >= sizeof(struct rx_status). */ + status = (struct rx_status *) + (buffer + (length - sizeof(struct rx_status))); + if (status->frame_status & ZD_RX_ERROR) { + if (mac->pass_failed_fcs && + (status->frame_status & ZD_RX_CRC32_ERROR)) { + stats.flag |= RX_FLAG_FAILED_FCS_CRC; + bad_frame = 1; + } else { + return -EINVAL; + } + } + + stats.freq = zd_channels[_zd_chip_get_channel(&mac->chip) - 1].center_freq; + stats.band = IEEE80211_BAND_2GHZ; + stats.signal = zd_check_signal(hw, status->signal_strength); + + rate = zd_rx_rate(buffer, status); + + /* todo: return index in the big switches in zd_rx_rate instead */ + for (i = 0; i < mac->band.n_bitrates; i++) + if (rate == mac->band.bitrates[i].hw_value) + stats.rate_idx = i; + + length -= ZD_PLCP_HEADER_SIZE + sizeof(struct rx_status); + buffer += ZD_PLCP_HEADER_SIZE; + + /* Except for bad frames, filter each frame to see if it is an ACK, in + * which case our internal TX tracking is updated. Normally we then + * bail here as there's no need to pass ACKs on up to the stack, but + * there is also the case where the stack has requested us to pass + * control frames on up (pass_ctrl) which we must consider. */ + if (!bad_frame && + filter_ack(hw, (struct ieee80211_hdr *)buffer, &stats) + && !mac->pass_ctrl) + return 0; + + fc = get_unaligned((__le16*)buffer); + need_padding = ieee80211_is_data_qos(fc) ^ ieee80211_has_a4(fc); + + skb = dev_alloc_skb(length + (need_padding ? 2 : 0)); + if (skb == NULL) + return -ENOMEM; + if (need_padding) { + /* Make sure the payload data is 4 byte aligned. */ + skb_reserve(skb, 2); + } + + /* FIXME : could we avoid this big memcpy ? */ + memcpy(skb_put(skb, length), buffer, length); + + memcpy(IEEE80211_SKB_RXCB(skb), &stats, sizeof(stats)); + ieee80211_rx_irqsafe(hw, skb); + return 0; +} + +static int zd_op_add_interface(struct ieee80211_hw *hw, + struct ieee80211_vif *vif) +{ + struct zd_mac *mac = zd_hw_mac(hw); + + /* using NL80211_IFTYPE_UNSPECIFIED to indicate no mode selected */ + if (mac->type != NL80211_IFTYPE_UNSPECIFIED) + return -EOPNOTSUPP; + + switch (vif->type) { + case NL80211_IFTYPE_MONITOR: + case NL80211_IFTYPE_MESH_POINT: + case NL80211_IFTYPE_STATION: + case NL80211_IFTYPE_ADHOC: + case NL80211_IFTYPE_AP: + mac->type = vif->type; + break; + default: + return -EOPNOTSUPP; + } + + mac->vif = vif; + + return set_mac_and_bssid(mac); +} + +static void zd_op_remove_interface(struct ieee80211_hw *hw, + struct ieee80211_vif *vif) +{ + struct zd_mac *mac = zd_hw_mac(hw); + mac->type = NL80211_IFTYPE_UNSPECIFIED; + mac->vif = NULL; + zd_set_beacon_interval(&mac->chip, 0, 0, NL80211_IFTYPE_UNSPECIFIED); + zd_write_mac_addr(&mac->chip, NULL); + + zd_mac_free_cur_beacon(mac); +} + +static int zd_op_config(struct ieee80211_hw *hw, u32 changed) +{ + struct zd_mac *mac = zd_hw_mac(hw); + struct ieee80211_conf *conf = &hw->conf; + + spin_lock_irq(&mac->lock); + mac->channel = conf->chandef.chan->hw_value; + spin_unlock_irq(&mac->lock); + + return zd_chip_set_channel(&mac->chip, conf->chandef.chan->hw_value); +} + +static void zd_beacon_done(struct zd_mac *mac) +{ + struct sk_buff *skb, *beacon; + + if (!test_bit(ZD_DEVICE_RUNNING, &mac->flags)) + return; + if (!mac->vif || mac->vif->type != NL80211_IFTYPE_AP) + return; + + /* + * Send out buffered broad- and multicast frames. + */ + while (!ieee80211_queue_stopped(mac->hw, 0)) { + skb = ieee80211_get_buffered_bc(mac->hw, mac->vif); + if (!skb) + break; + zd_op_tx(mac->hw, NULL, skb); + } + + /* + * Fetch next beacon so that tim_count is updated. + */ + beacon = ieee80211_beacon_get(mac->hw, mac->vif); + if (beacon) + zd_mac_config_beacon(mac->hw, beacon, true); + + spin_lock_irq(&mac->lock); + mac->beacon.last_update = jiffies; + spin_unlock_irq(&mac->lock); +} + +static void zd_process_intr(struct work_struct *work) +{ + u16 int_status; + unsigned long flags; + struct zd_mac *mac = container_of(work, struct zd_mac, process_intr); + + spin_lock_irqsave(&mac->lock, flags); + int_status = le16_to_cpu(*(__le16 *)(mac->intr_buffer + 4)); + spin_unlock_irqrestore(&mac->lock, flags); + + if (int_status & INT_CFG_NEXT_BCN) { + /*dev_dbg_f_limit(zd_mac_dev(mac), "INT_CFG_NEXT_BCN\n");*/ + zd_beacon_done(mac); + } else { + dev_dbg_f(zd_mac_dev(mac), "Unsupported interrupt\n"); + } + + zd_chip_enable_hwint(&mac->chip); +} + + +static u64 zd_op_prepare_multicast(struct ieee80211_hw *hw, + struct netdev_hw_addr_list *mc_list) +{ + struct zd_mac *mac = zd_hw_mac(hw); + struct zd_mc_hash hash; + struct netdev_hw_addr *ha; + + zd_mc_clear(&hash); + + netdev_hw_addr_list_for_each(ha, mc_list) { + dev_dbg_f(zd_mac_dev(mac), "mc addr %pM\n", ha->addr); + zd_mc_add_addr(&hash, ha->addr); + } + + return hash.low | ((u64)hash.high << 32); +} + +#define SUPPORTED_FIF_FLAGS \ + (FIF_PROMISC_IN_BSS | FIF_ALLMULTI | FIF_FCSFAIL | FIF_CONTROL | \ + FIF_OTHER_BSS | FIF_BCN_PRBRESP_PROMISC) +static void zd_op_configure_filter(struct ieee80211_hw *hw, + unsigned int changed_flags, + unsigned int *new_flags, + u64 multicast) +{ + struct zd_mc_hash hash = { + .low = multicast, + .high = multicast >> 32, + }; + struct zd_mac *mac = zd_hw_mac(hw); + unsigned long flags; + int r; + + /* Only deal with supported flags */ + changed_flags &= SUPPORTED_FIF_FLAGS; + *new_flags &= SUPPORTED_FIF_FLAGS; + + /* + * If multicast parameter (as returned by zd_op_prepare_multicast) + * has changed, no bit in changed_flags is set. To handle this + * situation, we do not return if changed_flags is 0. If we do so, + * we will have some issue with IPv6 which uses multicast for link + * layer address resolution. + */ + if (*new_flags & (FIF_PROMISC_IN_BSS | FIF_ALLMULTI)) + zd_mc_add_all(&hash); + + spin_lock_irqsave(&mac->lock, flags); + mac->pass_failed_fcs = !!(*new_flags & FIF_FCSFAIL); + mac->pass_ctrl = !!(*new_flags & FIF_CONTROL); + mac->multicast_hash = hash; + spin_unlock_irqrestore(&mac->lock, flags); + + zd_chip_set_multicast_hash(&mac->chip, &hash); + + if (changed_flags & FIF_CONTROL) { + r = set_rx_filter(mac); + if (r) + dev_err(zd_mac_dev(mac), "set_rx_filter error %d\n", r); + } + + /* no handling required for FIF_OTHER_BSS as we don't currently + * do BSSID filtering */ + /* FIXME: in future it would be nice to enable the probe response + * filter (so that the driver doesn't see them) until + * FIF_BCN_PRBRESP_PROMISC is set. however due to atomicity here, we'd + * have to schedule work to enable prbresp reception, which might + * happen too late. For now we'll just listen and forward them all the + * time. */ +} + +static void set_rts_cts(struct zd_mac *mac, unsigned int short_preamble) +{ + mutex_lock(&mac->chip.mutex); + zd_chip_set_rts_cts_rate_locked(&mac->chip, short_preamble); + mutex_unlock(&mac->chip.mutex); +} + +static void zd_op_bss_info_changed(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_bss_conf *bss_conf, + u32 changes) +{ + struct zd_mac *mac = zd_hw_mac(hw); + int associated; + + dev_dbg_f(zd_mac_dev(mac), "changes: %x\n", changes); + + if (mac->type == NL80211_IFTYPE_MESH_POINT || + mac->type == NL80211_IFTYPE_ADHOC || + mac->type == NL80211_IFTYPE_AP) { + associated = true; + if (changes & BSS_CHANGED_BEACON) { + struct sk_buff *beacon = ieee80211_beacon_get(hw, vif); + + if (beacon) { + zd_chip_disable_hwint(&mac->chip); + zd_mac_config_beacon(hw, beacon, false); + zd_chip_enable_hwint(&mac->chip); + } + } + + if (changes & BSS_CHANGED_BEACON_ENABLED) { + u16 interval = 0; + u8 period = 0; + + if (bss_conf->enable_beacon) { + period = bss_conf->dtim_period; + interval = bss_conf->beacon_int; + } + + spin_lock_irq(&mac->lock); + mac->beacon.period = period; + mac->beacon.interval = interval; + mac->beacon.last_update = jiffies; + spin_unlock_irq(&mac->lock); + + zd_set_beacon_interval(&mac->chip, interval, period, + mac->type); + } + } else + associated = is_valid_ether_addr(bss_conf->bssid); + + spin_lock_irq(&mac->lock); + mac->associated = associated; + spin_unlock_irq(&mac->lock); + + /* TODO: do hardware bssid filtering */ + + if (changes & BSS_CHANGED_ERP_PREAMBLE) { + spin_lock_irq(&mac->lock); + mac->short_preamble = bss_conf->use_short_preamble; + spin_unlock_irq(&mac->lock); + + set_rts_cts(mac, bss_conf->use_short_preamble); + } +} + +static u64 zd_op_get_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif) +{ + struct zd_mac *mac = zd_hw_mac(hw); + return zd_chip_get_tsf(&mac->chip); +} + +static const struct ieee80211_ops zd_ops = { + .tx = zd_op_tx, + .start = zd_op_start, + .stop = zd_op_stop, + .add_interface = zd_op_add_interface, + .remove_interface = zd_op_remove_interface, + .config = zd_op_config, + .prepare_multicast = zd_op_prepare_multicast, + .configure_filter = zd_op_configure_filter, + .bss_info_changed = zd_op_bss_info_changed, + .get_tsf = zd_op_get_tsf, +}; + +struct ieee80211_hw *zd_mac_alloc_hw(struct usb_interface *intf) +{ + struct zd_mac *mac; + struct ieee80211_hw *hw; + + hw = ieee80211_alloc_hw(sizeof(struct zd_mac), &zd_ops); + if (!hw) { + dev_dbg_f(&intf->dev, "out of memory\n"); + return NULL; + } + + mac = zd_hw_mac(hw); + + memset(mac, 0, sizeof(*mac)); + spin_lock_init(&mac->lock); + mac->hw = hw; + + mac->type = NL80211_IFTYPE_UNSPECIFIED; + + memcpy(mac->channels, zd_channels, sizeof(zd_channels)); + memcpy(mac->rates, zd_rates, sizeof(zd_rates)); + mac->band.n_bitrates = ARRAY_SIZE(zd_rates); + mac->band.bitrates = mac->rates; + mac->band.n_channels = ARRAY_SIZE(zd_channels); + mac->band.channels = mac->channels; + + hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &mac->band; + + hw->flags = IEEE80211_HW_RX_INCLUDES_FCS | + IEEE80211_HW_SIGNAL_UNSPEC | + IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | + IEEE80211_HW_MFP_CAPABLE; + + hw->wiphy->interface_modes = + BIT(NL80211_IFTYPE_MESH_POINT) | + BIT(NL80211_IFTYPE_STATION) | + BIT(NL80211_IFTYPE_ADHOC) | + BIT(NL80211_IFTYPE_AP); + + hw->max_signal = 100; + hw->queues = 1; + hw->extra_tx_headroom = sizeof(struct zd_ctrlset); + + /* + * Tell mac80211 that we support multi rate retries + */ + hw->max_rates = IEEE80211_TX_MAX_RATES; + hw->max_rate_tries = 18; /* 9 rates * 2 retries/rate */ + + skb_queue_head_init(&mac->ack_wait_queue); + mac->ack_pending = 0; + + zd_chip_init(&mac->chip, hw, intf); + housekeeping_init(mac); + beacon_init(mac); + INIT_WORK(&mac->process_intr, zd_process_intr); + + SET_IEEE80211_DEV(hw, &intf->dev); + return hw; +} + +#define BEACON_WATCHDOG_DELAY round_jiffies_relative(HZ) + +static void beacon_watchdog_handler(struct work_struct *work) +{ + struct zd_mac *mac = + container_of(work, struct zd_mac, beacon.watchdog_work.work); + struct sk_buff *beacon; + unsigned long timeout; + int interval, period; + + if (!test_bit(ZD_DEVICE_RUNNING, &mac->flags)) + goto rearm; + if (mac->type != NL80211_IFTYPE_AP || !mac->vif) + goto rearm; + + spin_lock_irq(&mac->lock); + interval = mac->beacon.interval; + period = mac->beacon.period; + timeout = mac->beacon.last_update + + msecs_to_jiffies(interval * 1024 / 1000) * 3; + spin_unlock_irq(&mac->lock); + + if (interval > 0 && time_is_before_jiffies(timeout)) { + dev_dbg_f(zd_mac_dev(mac), "beacon interrupt stalled, " + "restarting. " + "(interval: %d, dtim: %d)\n", + interval, period); + + zd_chip_disable_hwint(&mac->chip); + + beacon = ieee80211_beacon_get(mac->hw, mac->vif); + if (beacon) { + zd_mac_free_cur_beacon(mac); + + zd_mac_config_beacon(mac->hw, beacon, false); + } + + zd_set_beacon_interval(&mac->chip, interval, period, mac->type); + + zd_chip_enable_hwint(&mac->chip); + + spin_lock_irq(&mac->lock); + mac->beacon.last_update = jiffies; + spin_unlock_irq(&mac->lock); + } + +rearm: + queue_delayed_work(zd_workqueue, &mac->beacon.watchdog_work, + BEACON_WATCHDOG_DELAY); +} + +static void beacon_init(struct zd_mac *mac) +{ + INIT_DELAYED_WORK(&mac->beacon.watchdog_work, beacon_watchdog_handler); +} + +static void beacon_enable(struct zd_mac *mac) +{ + dev_dbg_f(zd_mac_dev(mac), "\n"); + + mac->beacon.last_update = jiffies; + queue_delayed_work(zd_workqueue, &mac->beacon.watchdog_work, + BEACON_WATCHDOG_DELAY); +} + +static void beacon_disable(struct zd_mac *mac) +{ + dev_dbg_f(zd_mac_dev(mac), "\n"); + cancel_delayed_work_sync(&mac->beacon.watchdog_work); + + zd_mac_free_cur_beacon(mac); +} + +#define LINK_LED_WORK_DELAY HZ + +static void link_led_handler(struct work_struct *work) +{ + struct zd_mac *mac = + container_of(work, struct zd_mac, housekeeping.link_led_work.work); + struct zd_chip *chip = &mac->chip; + int is_associated; + int r; + + if (!test_bit(ZD_DEVICE_RUNNING, &mac->flags)) + goto requeue; + + spin_lock_irq(&mac->lock); + is_associated = mac->associated; + spin_unlock_irq(&mac->lock); + + r = zd_chip_control_leds(chip, + is_associated ? ZD_LED_ASSOCIATED : ZD_LED_SCANNING); + if (r) + dev_dbg_f(zd_mac_dev(mac), "zd_chip_control_leds error %d\n", r); + +requeue: + queue_delayed_work(zd_workqueue, &mac->housekeeping.link_led_work, + LINK_LED_WORK_DELAY); +} + +static void housekeeping_init(struct zd_mac *mac) +{ + INIT_DELAYED_WORK(&mac->housekeeping.link_led_work, link_led_handler); +} + +static void housekeeping_enable(struct zd_mac *mac) +{ + dev_dbg_f(zd_mac_dev(mac), "\n"); + queue_delayed_work(zd_workqueue, &mac->housekeeping.link_led_work, + 0); +} + +static void housekeeping_disable(struct zd_mac *mac) +{ + dev_dbg_f(zd_mac_dev(mac), "\n"); + cancel_delayed_work_sync(&mac->housekeeping.link_led_work); + zd_chip_control_leds(&mac->chip, ZD_LED_OFF); +} |