diff options
Diffstat (limited to 'kernel/drivers/net/wireless/ti/wl18xx/acx.c')
| -rw-r--r-- | kernel/drivers/net/wireless/ti/wl18xx/acx.c | 284 |
1 files changed, 284 insertions, 0 deletions
diff --git a/kernel/drivers/net/wireless/ti/wl18xx/acx.c b/kernel/drivers/net/wireless/ti/wl18xx/acx.c new file mode 100644 index 000000000..67f2a0eec --- /dev/null +++ b/kernel/drivers/net/wireless/ti/wl18xx/acx.c @@ -0,0 +1,284 @@ +/* + * This file is part of wl18xx + * + * Copyright (C) 2011 Texas Instruments Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include "../wlcore/cmd.h" +#include "../wlcore/debug.h" +#include "../wlcore/acx.h" + +#include "acx.h" +#include "wl18xx.h" + +int wl18xx_acx_host_if_cfg_bitmap(struct wl1271 *wl, u32 host_cfg_bitmap, + u32 sdio_blk_size, u32 extra_mem_blks, + u32 len_field_size) +{ + struct wl18xx_acx_host_config_bitmap *bitmap_conf; + int ret; + + wl1271_debug(DEBUG_ACX, "acx cfg bitmap %d blk %d spare %d field %d", + host_cfg_bitmap, sdio_blk_size, extra_mem_blks, + len_field_size); + + bitmap_conf = kzalloc(sizeof(*bitmap_conf), GFP_KERNEL); + if (!bitmap_conf) { + ret = -ENOMEM; + goto out; + } + + bitmap_conf->host_cfg_bitmap = cpu_to_le32(host_cfg_bitmap); + bitmap_conf->host_sdio_block_size = cpu_to_le32(sdio_blk_size); + bitmap_conf->extra_mem_blocks = cpu_to_le32(extra_mem_blks); + bitmap_conf->length_field_size = cpu_to_le32(len_field_size); + + ret = wl1271_cmd_configure(wl, ACX_HOST_IF_CFG_BITMAP, + bitmap_conf, sizeof(*bitmap_conf)); + if (ret < 0) { + wl1271_warning("wl1271 bitmap config opt failed: %d", ret); + goto out; + } + +out: + kfree(bitmap_conf); + + return ret; +} + +int wl18xx_acx_set_checksum_state(struct wl1271 *wl) +{ + struct wl18xx_acx_checksum_state *acx; + int ret; + + wl1271_debug(DEBUG_ACX, "acx checksum state"); + + acx = kzalloc(sizeof(*acx), GFP_KERNEL); + if (!acx) { + ret = -ENOMEM; + goto out; + } + + acx->checksum_state = CHECKSUM_OFFLOAD_ENABLED; + + ret = wl1271_cmd_configure(wl, ACX_CSUM_CONFIG, acx, sizeof(*acx)); + if (ret < 0) { + wl1271_warning("failed to set Tx checksum state: %d", ret); + goto out; + } + +out: + kfree(acx); + return ret; +} + +int wl18xx_acx_clear_statistics(struct wl1271 *wl) +{ + struct wl18xx_acx_clear_statistics *acx; + int ret = 0; + + wl1271_debug(DEBUG_ACX, "acx clear statistics"); + + acx = kzalloc(sizeof(*acx), GFP_KERNEL); + if (!acx) { + ret = -ENOMEM; + goto out; + } + + ret = wl1271_cmd_configure(wl, ACX_CLEAR_STATISTICS, acx, sizeof(*acx)); + if (ret < 0) { + wl1271_warning("failed to clear firmware statistics: %d", ret); + goto out; + } + +out: + kfree(acx); + return ret; +} + +int wl18xx_acx_peer_ht_operation_mode(struct wl1271 *wl, u8 hlid, bool wide) +{ + struct wlcore_peer_ht_operation_mode *acx; + int ret; + + wl1271_debug(DEBUG_ACX, "acx peer ht operation mode hlid %d bw %d", + hlid, wide); + + acx = kzalloc(sizeof(*acx), GFP_KERNEL); + if (!acx) { + ret = -ENOMEM; + goto out; + } + + acx->hlid = hlid; + acx->bandwidth = wide ? WLCORE_BANDWIDTH_40MHZ : WLCORE_BANDWIDTH_20MHZ; + + ret = wl1271_cmd_configure(wl, ACX_PEER_HT_OPERATION_MODE_CFG, acx, + sizeof(*acx)); + + if (ret < 0) { + wl1271_warning("acx peer ht operation mode failed: %d", ret); + goto out; + } + +out: + kfree(acx); + return ret; + +} + +/* + * this command is basically the same as wl1271_acx_ht_capabilities, + * with the addition of supported rates. they should be unified in + * the next fw api change + */ +int wl18xx_acx_set_peer_cap(struct wl1271 *wl, + struct ieee80211_sta_ht_cap *ht_cap, + bool allow_ht_operation, + u32 rate_set, u8 hlid) +{ + struct wlcore_acx_peer_cap *acx; + int ret = 0; + u32 ht_capabilites = 0; + + wl1271_debug(DEBUG_ACX, + "acx set cap ht_supp: %d ht_cap: %d rates: 0x%x", + ht_cap->ht_supported, ht_cap->cap, rate_set); + + acx = kzalloc(sizeof(*acx), GFP_KERNEL); + if (!acx) { + ret = -ENOMEM; + goto out; + } + + if (allow_ht_operation && ht_cap->ht_supported) { + /* no need to translate capabilities - use the spec values */ + ht_capabilites = ht_cap->cap; + + /* + * this bit is not employed by the spec but only by FW to + * indicate peer HT support + */ + ht_capabilites |= WL12XX_HT_CAP_HT_OPERATION; + + /* get data from A-MPDU parameters field */ + acx->ampdu_max_length = ht_cap->ampdu_factor; + acx->ampdu_min_spacing = ht_cap->ampdu_density; + } + + acx->hlid = hlid; + acx->ht_capabilites = cpu_to_le32(ht_capabilites); + acx->supported_rates = cpu_to_le32(rate_set); + + ret = wl1271_cmd_configure(wl, ACX_PEER_CAP, acx, sizeof(*acx)); + if (ret < 0) { + wl1271_warning("acx ht capabilities setting failed: %d", ret); + goto out; + } + +out: + kfree(acx); + return ret; +} + +/* + * When the host is suspended, we don't want to get any fast-link/PSM + * notifications + */ +int wl18xx_acx_interrupt_notify_config(struct wl1271 *wl, + bool action) +{ + struct wl18xx_acx_interrupt_notify *acx; + int ret = 0; + + acx = kzalloc(sizeof(*acx), GFP_KERNEL); + if (!acx) { + ret = -ENOMEM; + goto out; + } + + acx->enable = action; + ret = wl1271_cmd_configure(wl, ACX_INTERRUPT_NOTIFY, acx, sizeof(*acx)); + if (ret < 0) { + wl1271_warning("acx interrupt notify setting failed: %d", ret); + goto out; + } + +out: + kfree(acx); + return ret; +} + +/* + * When the host is suspended, we can configure the FW to disable RX BA + * notifications. + */ +int wl18xx_acx_rx_ba_filter(struct wl1271 *wl, bool action) +{ + struct wl18xx_acx_rx_ba_filter *acx; + int ret = 0; + + acx = kzalloc(sizeof(*acx), GFP_KERNEL); + if (!acx) { + ret = -ENOMEM; + goto out; + } + + acx->enable = (u32)action; + ret = wl1271_cmd_configure(wl, ACX_RX_BA_FILTER, acx, sizeof(*acx)); + if (ret < 0) { + wl1271_warning("acx rx ba activity filter setting failed: %d", + ret); + goto out; + } + +out: + kfree(acx); + return ret; +} + +int wl18xx_acx_ap_sleep(struct wl1271 *wl) +{ + struct wl18xx_priv *priv = wl->priv; + struct acx_ap_sleep_cfg *acx; + struct conf_ap_sleep_settings *conf = &priv->conf.ap_sleep; + int ret; + + wl1271_debug(DEBUG_ACX, "acx config ap sleep"); + + acx = kzalloc(sizeof(*acx), GFP_KERNEL); + if (!acx) { + ret = -ENOMEM; + goto out; + } + + acx->idle_duty_cycle = conf->idle_duty_cycle; + acx->connected_duty_cycle = conf->connected_duty_cycle; + acx->max_stations_thresh = conf->max_stations_thresh; + acx->idle_conn_thresh = conf->idle_conn_thresh; + + ret = wl1271_cmd_configure(wl, ACX_AP_SLEEP_CFG, acx, sizeof(*acx)); + if (ret < 0) { + wl1271_warning("acx config ap-sleep failed: %d", ret); + goto out; + } + +out: + kfree(acx); + return ret; +} |