diff options
Diffstat (limited to 'kernel/drivers/net/wireless/ti/wl1251/spi.c')
-rw-r--r-- | kernel/drivers/net/wireless/ti/wl1251/spi.c | 368 |
1 files changed, 368 insertions, 0 deletions
diff --git a/kernel/drivers/net/wireless/ti/wl1251/spi.c b/kernel/drivers/net/wireless/ti/wl1251/spi.c new file mode 100644 index 000000000..735be5352 --- /dev/null +++ b/kernel/drivers/net/wireless/ti/wl1251/spi.c @@ -0,0 +1,368 @@ +/* + * This file is part of wl1251 + * + * Copyright (C) 2008 Nokia Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/swab.h> +#include <linux/crc7.h> +#include <linux/spi/spi.h> +#include <linux/wl12xx.h> +#include <linux/gpio.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/regulator/consumer.h> + +#include "wl1251.h" +#include "reg.h" +#include "spi.h" + +static irqreturn_t wl1251_irq(int irq, void *cookie) +{ + struct wl1251 *wl; + + wl1251_debug(DEBUG_IRQ, "IRQ"); + + wl = cookie; + + ieee80211_queue_work(wl->hw, &wl->irq_work); + + return IRQ_HANDLED; +} + +static struct spi_device *wl_to_spi(struct wl1251 *wl) +{ + return wl->if_priv; +} + +static void wl1251_spi_reset(struct wl1251 *wl) +{ + u8 *cmd; + struct spi_transfer t; + struct spi_message m; + + cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL); + if (!cmd) { + wl1251_error("could not allocate cmd for spi reset"); + return; + } + + memset(&t, 0, sizeof(t)); + spi_message_init(&m); + + memset(cmd, 0xff, WSPI_INIT_CMD_LEN); + + t.tx_buf = cmd; + t.len = WSPI_INIT_CMD_LEN; + spi_message_add_tail(&t, &m); + + spi_sync(wl_to_spi(wl), &m); + + wl1251_dump(DEBUG_SPI, "spi reset -> ", cmd, WSPI_INIT_CMD_LEN); + + kfree(cmd); +} + +static void wl1251_spi_wake(struct wl1251 *wl) +{ + struct spi_transfer t; + struct spi_message m; + u8 *cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL); + + if (!cmd) { + wl1251_error("could not allocate cmd for spi init"); + return; + } + + memset(&t, 0, sizeof(t)); + spi_message_init(&m); + + /* Set WSPI_INIT_COMMAND + * the data is being send from the MSB to LSB + */ + cmd[0] = 0xff; + cmd[1] = 0xff; + cmd[2] = WSPI_INIT_CMD_START | WSPI_INIT_CMD_TX; + cmd[3] = 0; + cmd[4] = 0; + cmd[5] = HW_ACCESS_WSPI_INIT_CMD_MASK << 3; + cmd[5] |= HW_ACCESS_WSPI_FIXED_BUSY_LEN & WSPI_INIT_CMD_FIXEDBUSY_LEN; + + cmd[6] = WSPI_INIT_CMD_IOD | WSPI_INIT_CMD_IP | WSPI_INIT_CMD_CS + | WSPI_INIT_CMD_WSPI | WSPI_INIT_CMD_WS; + + if (HW_ACCESS_WSPI_FIXED_BUSY_LEN == 0) + cmd[6] |= WSPI_INIT_CMD_DIS_FIXEDBUSY; + else + cmd[6] |= WSPI_INIT_CMD_EN_FIXEDBUSY; + + cmd[7] = crc7_be(0, cmd+2, WSPI_INIT_CMD_CRC_LEN) | WSPI_INIT_CMD_END; + /* + * The above is the logical order; it must actually be stored + * in the buffer byte-swapped. + */ + __swab32s((u32 *)cmd); + __swab32s((u32 *)cmd+1); + + t.tx_buf = cmd; + t.len = WSPI_INIT_CMD_LEN; + spi_message_add_tail(&t, &m); + + spi_sync(wl_to_spi(wl), &m); + + wl1251_dump(DEBUG_SPI, "spi init -> ", cmd, WSPI_INIT_CMD_LEN); + + kfree(cmd); +} + +static void wl1251_spi_reset_wake(struct wl1251 *wl) +{ + wl1251_spi_reset(wl); + wl1251_spi_wake(wl); +} + +static void wl1251_spi_read(struct wl1251 *wl, int addr, void *buf, + size_t len) +{ + struct spi_transfer t[3]; + struct spi_message m; + u8 *busy_buf; + u32 *cmd; + + cmd = &wl->buffer_cmd; + busy_buf = wl->buffer_busyword; + + *cmd = 0; + *cmd |= WSPI_CMD_READ; + *cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH; + *cmd |= addr & WSPI_CMD_BYTE_ADDR; + + spi_message_init(&m); + memset(t, 0, sizeof(t)); + + t[0].tx_buf = cmd; + t[0].len = 4; + spi_message_add_tail(&t[0], &m); + + /* Busy and non busy words read */ + t[1].rx_buf = busy_buf; + t[1].len = WL1251_BUSY_WORD_LEN; + spi_message_add_tail(&t[1], &m); + + t[2].rx_buf = buf; + t[2].len = len; + spi_message_add_tail(&t[2], &m); + + spi_sync(wl_to_spi(wl), &m); + + /* FIXME: check busy words */ + + wl1251_dump(DEBUG_SPI, "spi_read cmd -> ", cmd, sizeof(*cmd)); + wl1251_dump(DEBUG_SPI, "spi_read buf <- ", buf, len); +} + +static void wl1251_spi_write(struct wl1251 *wl, int addr, void *buf, + size_t len) +{ + struct spi_transfer t[2]; + struct spi_message m; + u32 *cmd; + + cmd = &wl->buffer_cmd; + + *cmd = 0; + *cmd |= WSPI_CMD_WRITE; + *cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH; + *cmd |= addr & WSPI_CMD_BYTE_ADDR; + + spi_message_init(&m); + memset(t, 0, sizeof(t)); + + t[0].tx_buf = cmd; + t[0].len = sizeof(*cmd); + spi_message_add_tail(&t[0], &m); + + t[1].tx_buf = buf; + t[1].len = len; + spi_message_add_tail(&t[1], &m); + + spi_sync(wl_to_spi(wl), &m); + + wl1251_dump(DEBUG_SPI, "spi_write cmd -> ", cmd, sizeof(*cmd)); + wl1251_dump(DEBUG_SPI, "spi_write buf -> ", buf, len); +} + +static void wl1251_spi_enable_irq(struct wl1251 *wl) +{ + return enable_irq(wl->irq); +} + +static void wl1251_spi_disable_irq(struct wl1251 *wl) +{ + return disable_irq(wl->irq); +} + +static int wl1251_spi_set_power(struct wl1251 *wl, bool enable) +{ + if (gpio_is_valid(wl->power_gpio)) + gpio_set_value(wl->power_gpio, enable); + + return 0; +} + +static const struct wl1251_if_operations wl1251_spi_ops = { + .read = wl1251_spi_read, + .write = wl1251_spi_write, + .reset = wl1251_spi_reset_wake, + .enable_irq = wl1251_spi_enable_irq, + .disable_irq = wl1251_spi_disable_irq, + .power = wl1251_spi_set_power, +}; + +static int wl1251_spi_probe(struct spi_device *spi) +{ + struct wl1251_platform_data *pdata = dev_get_platdata(&spi->dev); + struct device_node *np = spi->dev.of_node; + struct ieee80211_hw *hw; + struct wl1251 *wl; + int ret; + + if (!np && !pdata) { + wl1251_error("no platform data"); + return -ENODEV; + } + + hw = wl1251_alloc_hw(); + if (IS_ERR(hw)) + return PTR_ERR(hw); + + wl = hw->priv; + + SET_IEEE80211_DEV(hw, &spi->dev); + spi_set_drvdata(spi, wl); + wl->if_priv = spi; + wl->if_ops = &wl1251_spi_ops; + + /* This is the only SPI value that we need to set here, the rest + * comes from the board-peripherals file + */ + spi->bits_per_word = 32; + + ret = spi_setup(spi); + if (ret < 0) { + wl1251_error("spi_setup failed"); + goto out_free; + } + + if (np) { + wl->use_eeprom = of_property_read_bool(np, "ti,wl1251-has-eeprom"); + wl->power_gpio = of_get_named_gpio(np, "ti,power-gpio", 0); + } else if (pdata) { + wl->power_gpio = pdata->power_gpio; + wl->use_eeprom = pdata->use_eeprom; + } + + if (wl->power_gpio == -EPROBE_DEFER) { + ret = -EPROBE_DEFER; + goto out_free; + } + + if (gpio_is_valid(wl->power_gpio)) { + ret = devm_gpio_request_one(&spi->dev, wl->power_gpio, + GPIOF_OUT_INIT_LOW, "wl1251 power"); + if (ret) { + wl1251_error("Failed to request gpio: %d\n", ret); + goto out_free; + } + } else { + wl1251_error("set power gpio missing in platform data"); + ret = -ENODEV; + goto out_free; + } + + wl->irq = spi->irq; + if (wl->irq < 0) { + wl1251_error("irq missing in platform data"); + ret = -ENODEV; + goto out_free; + } + + irq_set_status_flags(wl->irq, IRQ_NOAUTOEN); + ret = devm_request_irq(&spi->dev, wl->irq, wl1251_irq, 0, + DRIVER_NAME, wl); + if (ret < 0) { + wl1251_error("request_irq() failed: %d", ret); + goto out_free; + } + + irq_set_irq_type(wl->irq, IRQ_TYPE_EDGE_RISING); + + wl->vio = devm_regulator_get(&spi->dev, "vio"); + if (IS_ERR(wl->vio)) { + ret = PTR_ERR(wl->vio); + wl1251_error("vio regulator missing: %d", ret); + goto out_free; + } + + ret = regulator_enable(wl->vio); + if (ret) + goto out_free; + + ret = wl1251_init_ieee80211(wl); + if (ret) + goto disable_regulator; + + return 0; + +disable_regulator: + regulator_disable(wl->vio); +out_free: + ieee80211_free_hw(hw); + + return ret; +} + +static int wl1251_spi_remove(struct spi_device *spi) +{ + struct wl1251 *wl = spi_get_drvdata(spi); + + wl1251_free_hw(wl); + regulator_disable(wl->vio); + + return 0; +} + +static struct spi_driver wl1251_spi_driver = { + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + }, + + .probe = wl1251_spi_probe, + .remove = wl1251_spi_remove, +}; + +module_spi_driver(wl1251_spi_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Kalle Valo <kvalo@adurom.com>"); +MODULE_ALIAS("spi:wl1251"); |