diff options
Diffstat (limited to 'kernel/drivers/net/wireless/orinoco/Kconfig')
| -rw-r--r-- | kernel/drivers/net/wireless/orinoco/Kconfig | 142 |
1 files changed, 142 insertions, 0 deletions
diff --git a/kernel/drivers/net/wireless/orinoco/Kconfig b/kernel/drivers/net/wireless/orinoco/Kconfig new file mode 100644 index 000000000..f6fa3f4e2 --- /dev/null +++ b/kernel/drivers/net/wireless/orinoco/Kconfig @@ -0,0 +1,142 @@ +config HERMES + tristate "Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)" + depends on (PPC_PMAC || PCI || PCMCIA) + depends on CFG80211 + select CFG80211_WEXT_EXPORT + select WIRELESS_EXT + select WEXT_SPY + select WEXT_PRIV + select FW_LOADER + select CRYPTO + select CRYPTO_MICHAEL_MIC + ---help--- + A driver for 802.11b wireless cards based on the "Hermes" or + Intersil HFA384x (Prism 2) MAC controller. This includes the vast + majority of the PCMCIA 802.11b cards (which are nearly all rebadges) + - except for the Cisco/Aironet cards. Cards supported include the + Apple Airport (not a PCMCIA card), WavelanIEEE/Orinoco, + Cabletron/EnteraSys Roamabout, ELSA AirLancer, MELCO Buffalo, Avaya, + IBM High Rate Wireless, Farralon Syyline, Samsung MagicLAN, Netgear + MA401, LinkSys WPC-11, D-Link DWL-650, 3Com AirConnect, Intel + IPW2011, and Symbol Spectrum24 High Rate amongst others. + + This option includes the guts of the driver, but in order to + actually use a card you will also need to enable support for PCMCIA + Hermes cards, PLX9052 based PCI adaptors or the Apple Airport below. + + You will also very likely also need the Wireless Tools in order to + configure your card and that /etc/pcmcia/wireless.opts works : + <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html> + +config HERMES_PRISM + bool "Support Prism 2/2.5 chipset" + depends on HERMES + ---help--- + + Say Y to enable support for Prism 2 and 2.5 chipsets. These + chipsets are better handled by the hostap driver. This driver + would not support WPA or firmware download for Prism chipset. + + If you are not sure, say N. + +config HERMES_CACHE_FW_ON_INIT + bool "Cache Hermes firmware on driver initialisation" + depends on HERMES + default y + ---help--- + Say Y to cache any firmware required by the Hermes drivers + on startup. The firmware will remain cached until the + driver is unloaded. The cache uses 64K of RAM. + + Otherwise load the firmware from userspace as required. In + this case the driver should be unloaded and restarted + whenever the firmware is changed. + + If you are not sure, say Y. + +config APPLE_AIRPORT + tristate "Apple Airport support (built-in)" + depends on PPC_PMAC && HERMES + help + Say Y here to support the Airport 802.11b wireless Ethernet hardware + built into the Macintosh iBook and other recent PowerPC-based + Macintosh machines. This is essentially a Lucent Orinoco card with + a non-standard interface. + + This driver does not support the Airport Extreme (802.11b/g). Use + the BCM43xx driver for Airport Extreme cards. + +config PLX_HERMES + tristate "Hermes in PLX9052 based PCI adaptor support (Netgear MA301 etc.)" + depends on PCI && HERMES + help + Enable support for PCMCIA cards supported by the "Hermes" (aka + orinoco) driver when used in PLX9052 based PCI adaptors. These + adaptors are not a full PCMCIA controller but act as a more limited + PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that + 802.11b PCMCIA cards can be used in desktop machines. The Netgear + MA301 is such an adaptor. + +config TMD_HERMES + tristate "Hermes in TMD7160 based PCI adaptor support" + depends on PCI && HERMES + help + Enable support for PCMCIA cards supported by the "Hermes" (aka + orinoco) driver when used in TMD7160 based PCI adaptors. These + adaptors are not a full PCMCIA controller but act as a more limited + PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that + 802.11b PCMCIA cards can be used in desktop machines. + +config NORTEL_HERMES + tristate "Nortel emobility PCI adaptor support" + depends on PCI && HERMES + help + Enable support for PCMCIA cards supported by the "Hermes" (aka + orinoco) driver when used in Nortel emobility PCI adaptors. These + adaptors are not full PCMCIA controllers, but act as a more limited + PCI <-> PCMCIA bridge. + +config PCI_HERMES + tristate "Prism 2.5 PCI 802.11b adaptor support" + depends on PCI && HERMES && HERMES_PRISM + help + Enable support for PCI and mini-PCI 802.11b wireless NICs based on + the Prism 2.5 chipset. These are true PCI cards, not the 802.11b + PCMCIA cards bundled with PCI<->PCMCIA adaptors which are also + common. Some of the built-in wireless adaptors in laptops are of + this variety. + +config PCMCIA_HERMES + tristate "Hermes PCMCIA card support" + depends on PCMCIA && HERMES && HAS_IOPORT_MAP + ---help--- + A driver for "Hermes" chipset based PCMCIA wireless adaptors, such + as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/ + EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and + others). It should also be usable on various Prism II based cards + such as the Linksys, D-Link and Farallon Skyline. It should also + work on Symbol cards such as the 3Com AirConnect and Ericsson WLAN. + + You will very likely need the Wireless Tools in order to + configure your card and that /etc/pcmcia/wireless.opts works: + <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>. + +config PCMCIA_SPECTRUM + tristate "Symbol Spectrum24 Trilogy PCMCIA card support" + depends on PCMCIA && HERMES && HAS_IOPORT_MAP + ---help--- + + This is a driver for 802.11b cards using RAM-loadable Symbol + firmware, such as Symbol Wireless Networker LA4100, CompactFlash + cards by Socket Communications and Intel PRO/Wireless 2011B. + + This driver requires firmware download on startup. Utilities + for downloading Symbol firmware are available at + <http://sourceforge.net/projects/orinoco/> + +config ORINOCO_USB + tristate "Agere Orinoco USB support" + depends on USB && HERMES + select FW_LOADER + ---help--- + This driver is for USB versions of the Agere Orinoco card. |