summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/net/wireless/libertas/if_sdio.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/net/wireless/libertas/if_sdio.c')
-rw-r--r--kernel/drivers/net/wireless/libertas/if_sdio.c1453
1 files changed, 1453 insertions, 0 deletions
diff --git a/kernel/drivers/net/wireless/libertas/if_sdio.c b/kernel/drivers/net/wireless/libertas/if_sdio.c
new file mode 100644
index 000000000..33ceda296
--- /dev/null
+++ b/kernel/drivers/net/wireless/libertas/if_sdio.c
@@ -0,0 +1,1453 @@
+/*
+ * linux/drivers/net/wireless/libertas/if_sdio.c
+ *
+ * Copyright 2007-2008 Pierre Ossman
+ *
+ * Inspired by if_cs.c, Copyright 2007 Holger Schurig
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This hardware has more or less no CMD53 support, so all registers
+ * must be accessed using sdio_readb()/sdio_writeb().
+ *
+ * Transfers must be in one transaction or the firmware goes bonkers.
+ * This means that the transfer must either be small enough to do a
+ * byte based transfer or it must be padded to a multiple of the
+ * current block size.
+ *
+ * As SDIO is still new to the kernel, it is unfortunately common with
+ * bugs in the host controllers related to that. One such bug is that
+ * controllers cannot do transfers that aren't a multiple of 4 bytes.
+ * If you don't have time to fix the host controller driver, you can
+ * work around the problem by modifying if_sdio_host_to_card() and
+ * if_sdio_card_to_host() to pad the data.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/firmware.h>
+#include <linux/netdevice.h>
+#include <linux/delay.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/sdio_func.h>
+#include <linux/mmc/sdio_ids.h>
+#include <linux/mmc/sdio.h>
+#include <linux/mmc/host.h>
+#include <linux/pm_runtime.h>
+
+#include "host.h"
+#include "decl.h"
+#include "defs.h"
+#include "dev.h"
+#include "cmd.h"
+#include "if_sdio.h"
+
+static void if_sdio_interrupt(struct sdio_func *func);
+
+/* The if_sdio_remove() callback function is called when
+ * user removes this module from kernel space or ejects
+ * the card from the slot. The driver handles these 2 cases
+ * differently for SD8688 combo chip.
+ * If the user is removing the module, the FUNC_SHUTDOWN
+ * command for SD8688 is sent to the firmware.
+ * If the card is removed, there is no need to send this command.
+ *
+ * The variable 'user_rmmod' is used to distinguish these two
+ * scenarios. This flag is initialized as FALSE in case the card
+ * is removed, and will be set to TRUE for module removal when
+ * module_exit function is called.
+ */
+static u8 user_rmmod;
+
+static const struct sdio_device_id if_sdio_ids[] = {
+ { SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL,
+ SDIO_DEVICE_ID_MARVELL_LIBERTAS) },
+ { SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL,
+ SDIO_DEVICE_ID_MARVELL_8688WLAN) },
+ { /* end: all zeroes */ },
+};
+
+MODULE_DEVICE_TABLE(sdio, if_sdio_ids);
+
+#define MODEL_8385 0x04
+#define MODEL_8686 0x0b
+#define MODEL_8688 0x10
+
+static const struct lbs_fw_table fw_table[] = {
+ { MODEL_8385, "libertas/sd8385_helper.bin", "libertas/sd8385.bin" },
+ { MODEL_8385, "sd8385_helper.bin", "sd8385.bin" },
+ { MODEL_8686, "libertas/sd8686_v9_helper.bin", "libertas/sd8686_v9.bin" },
+ { MODEL_8686, "libertas/sd8686_v8_helper.bin", "libertas/sd8686_v8.bin" },
+ { MODEL_8686, "sd8686_helper.bin", "sd8686.bin" },
+ { MODEL_8688, "libertas/sd8688_helper.bin", "libertas/sd8688.bin" },
+ { MODEL_8688, "sd8688_helper.bin", "sd8688.bin" },
+ { 0, NULL, NULL }
+};
+MODULE_FIRMWARE("libertas/sd8385_helper.bin");
+MODULE_FIRMWARE("libertas/sd8385.bin");
+MODULE_FIRMWARE("sd8385_helper.bin");
+MODULE_FIRMWARE("sd8385.bin");
+MODULE_FIRMWARE("libertas/sd8686_v9_helper.bin");
+MODULE_FIRMWARE("libertas/sd8686_v9.bin");
+MODULE_FIRMWARE("libertas/sd8686_v8_helper.bin");
+MODULE_FIRMWARE("libertas/sd8686_v8.bin");
+MODULE_FIRMWARE("sd8686_helper.bin");
+MODULE_FIRMWARE("sd8686.bin");
+MODULE_FIRMWARE("libertas/sd8688_helper.bin");
+MODULE_FIRMWARE("libertas/sd8688.bin");
+MODULE_FIRMWARE("sd8688_helper.bin");
+MODULE_FIRMWARE("sd8688.bin");
+
+struct if_sdio_packet {
+ struct if_sdio_packet *next;
+ u16 nb;
+ u8 buffer[0] __attribute__((aligned(4)));
+};
+
+struct if_sdio_card {
+ struct sdio_func *func;
+ struct lbs_private *priv;
+
+ int model;
+ unsigned long ioport;
+ unsigned int scratch_reg;
+ bool started;
+ wait_queue_head_t pwron_waitq;
+
+ u8 buffer[65536] __attribute__((aligned(4)));
+
+ spinlock_t lock;
+ struct if_sdio_packet *packets;
+
+ struct workqueue_struct *workqueue;
+ struct work_struct packet_worker;
+
+ u8 rx_unit;
+};
+
+static void if_sdio_finish_power_on(struct if_sdio_card *card);
+static int if_sdio_power_off(struct if_sdio_card *card);
+
+/********************************************************************/
+/* I/O */
+/********************************************************************/
+
+/*
+ * For SD8385/SD8686, this function reads firmware status after
+ * the image is downloaded, or reads RX packet length when
+ * interrupt (with IF_SDIO_H_INT_UPLD bit set) is received.
+ * For SD8688, this function reads firmware status only.
+ */
+static u16 if_sdio_read_scratch(struct if_sdio_card *card, int *err)
+{
+ int ret;
+ u16 scratch;
+
+ scratch = sdio_readb(card->func, card->scratch_reg, &ret);
+ if (!ret)
+ scratch |= sdio_readb(card->func, card->scratch_reg + 1,
+ &ret) << 8;
+
+ if (err)
+ *err = ret;
+
+ if (ret)
+ return 0xffff;
+
+ return scratch;
+}
+
+static u8 if_sdio_read_rx_unit(struct if_sdio_card *card)
+{
+ int ret;
+ u8 rx_unit;
+
+ rx_unit = sdio_readb(card->func, IF_SDIO_RX_UNIT, &ret);
+
+ if (ret)
+ rx_unit = 0;
+
+ return rx_unit;
+}
+
+static u16 if_sdio_read_rx_len(struct if_sdio_card *card, int *err)
+{
+ int ret;
+ u16 rx_len;
+
+ switch (card->model) {
+ case MODEL_8385:
+ case MODEL_8686:
+ rx_len = if_sdio_read_scratch(card, &ret);
+ break;
+ case MODEL_8688:
+ default: /* for newer chipsets */
+ rx_len = sdio_readb(card->func, IF_SDIO_RX_LEN, &ret);
+ if (!ret)
+ rx_len <<= card->rx_unit;
+ else
+ rx_len = 0xffff; /* invalid length */
+
+ break;
+ }
+
+ if (err)
+ *err = ret;
+
+ return rx_len;
+}
+
+static int if_sdio_handle_cmd(struct if_sdio_card *card,
+ u8 *buffer, unsigned size)
+{
+ struct lbs_private *priv = card->priv;
+ int ret;
+ unsigned long flags;
+ u8 i;
+
+ lbs_deb_enter(LBS_DEB_SDIO);
+
+ if (size > LBS_CMD_BUFFER_SIZE) {
+ lbs_deb_sdio("response packet too large (%d bytes)\n",
+ (int)size);
+ ret = -E2BIG;
+ goto out;
+ }
+
+ spin_lock_irqsave(&priv->driver_lock, flags);
+
+ i = (priv->resp_idx == 0) ? 1 : 0;
+ BUG_ON(priv->resp_len[i]);
+ priv->resp_len[i] = size;
+ memcpy(priv->resp_buf[i], buffer, size);
+ lbs_notify_command_response(priv, i);
+
+ spin_unlock_irqrestore(&card->priv->driver_lock, flags);
+
+ ret = 0;
+
+out:
+ lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
+ return ret;
+}
+
+static int if_sdio_handle_data(struct if_sdio_card *card,
+ u8 *buffer, unsigned size)
+{
+ int ret;
+ struct sk_buff *skb;
+ char *data;
+
+ lbs_deb_enter(LBS_DEB_SDIO);
+
+ if (size > MRVDRV_ETH_RX_PACKET_BUFFER_SIZE) {
+ lbs_deb_sdio("response packet too large (%d bytes)\n",
+ (int)size);
+ ret = -E2BIG;
+ goto out;
+ }
+
+ skb = dev_alloc_skb(MRVDRV_ETH_RX_PACKET_BUFFER_SIZE + NET_IP_ALIGN);
+ if (!skb) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ skb_reserve(skb, NET_IP_ALIGN);
+
+ data = skb_put(skb, size);
+
+ memcpy(data, buffer, size);
+
+ lbs_process_rxed_packet(card->priv, skb);
+
+ ret = 0;
+
+out:
+ lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
+
+ return ret;
+}
+
+static int if_sdio_handle_event(struct if_sdio_card *card,
+ u8 *buffer, unsigned size)
+{
+ int ret;
+ u32 event;
+
+ lbs_deb_enter(LBS_DEB_SDIO);
+
+ if (card->model == MODEL_8385) {
+ event = sdio_readb(card->func, IF_SDIO_EVENT, &ret);
+ if (ret)
+ goto out;
+
+ /* right shift 3 bits to get the event id */
+ event >>= 3;
+ } else {
+ if (size < 4) {
+ lbs_deb_sdio("event packet too small (%d bytes)\n",
+ (int)size);
+ ret = -EINVAL;
+ goto out;
+ }
+ event = buffer[3] << 24;
+ event |= buffer[2] << 16;
+ event |= buffer[1] << 8;
+ event |= buffer[0] << 0;
+ }
+
+ lbs_queue_event(card->priv, event & 0xFF);
+ ret = 0;
+
+out:
+ lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
+
+ return ret;
+}
+
+static int if_sdio_wait_status(struct if_sdio_card *card, const u8 condition)
+{
+ u8 status;
+ unsigned long timeout;
+ int ret = 0;
+
+ timeout = jiffies + HZ;
+ while (1) {
+ status = sdio_readb(card->func, IF_SDIO_STATUS, &ret);
+ if (ret)
+ return ret;
+ if ((status & condition) == condition)
+ break;
+ if (time_after(jiffies, timeout))
+ return -ETIMEDOUT;
+ mdelay(1);
+ }
+ return ret;
+}
+
+static int if_sdio_card_to_host(struct if_sdio_card *card)
+{
+ int ret;
+ u16 size, type, chunk;
+
+ lbs_deb_enter(LBS_DEB_SDIO);
+
+ size = if_sdio_read_rx_len(card, &ret);
+ if (ret)
+ goto out;
+
+ if (size < 4) {
+ lbs_deb_sdio("invalid packet size (%d bytes) from firmware\n",
+ (int)size);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ ret = if_sdio_wait_status(card, IF_SDIO_IO_RDY);
+ if (ret)
+ goto out;
+
+ /*
+ * The transfer must be in one transaction or the firmware
+ * goes suicidal. There's no way to guarantee that for all
+ * controllers, but we can at least try.
+ */
+ chunk = sdio_align_size(card->func, size);
+
+ ret = sdio_readsb(card->func, card->buffer, card->ioport, chunk);
+ if (ret)
+ goto out;
+
+ chunk = card->buffer[0] | (card->buffer[1] << 8);
+ type = card->buffer[2] | (card->buffer[3] << 8);
+
+ lbs_deb_sdio("packet of type %d and size %d bytes\n",
+ (int)type, (int)chunk);
+
+ if (chunk > size) {
+ lbs_deb_sdio("packet fragment (%d > %d)\n",
+ (int)chunk, (int)size);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ if (chunk < size) {
+ lbs_deb_sdio("packet fragment (%d < %d)\n",
+ (int)chunk, (int)size);
+ }
+
+ switch (type) {
+ case MVMS_CMD:
+ ret = if_sdio_handle_cmd(card, card->buffer + 4, chunk - 4);
+ if (ret)
+ goto out;
+ break;
+ case MVMS_DAT:
+ ret = if_sdio_handle_data(card, card->buffer + 4, chunk - 4);
+ if (ret)
+ goto out;
+ break;
+ case MVMS_EVENT:
+ ret = if_sdio_handle_event(card, card->buffer + 4, chunk - 4);
+ if (ret)
+ goto out;
+ break;
+ default:
+ lbs_deb_sdio("invalid type (%d) from firmware\n",
+ (int)type);
+ ret = -EINVAL;
+ goto out;
+ }
+
+out:
+ if (ret)
+ pr_err("problem fetching packet from firmware\n");
+
+ lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
+
+ return ret;
+}
+
+static void if_sdio_host_to_card_worker(struct work_struct *work)
+{
+ struct if_sdio_card *card;
+ struct if_sdio_packet *packet;
+ int ret;
+ unsigned long flags;
+
+ lbs_deb_enter(LBS_DEB_SDIO);
+
+ card = container_of(work, struct if_sdio_card, packet_worker);
+
+ while (1) {
+ spin_lock_irqsave(&card->lock, flags);
+ packet = card->packets;
+ if (packet)
+ card->packets = packet->next;
+ spin_unlock_irqrestore(&card->lock, flags);
+
+ if (!packet)
+ break;
+
+ sdio_claim_host(card->func);
+
+ ret = if_sdio_wait_status(card, IF_SDIO_IO_RDY);
+ if (ret == 0) {
+ ret = sdio_writesb(card->func, card->ioport,
+ packet->buffer, packet->nb);
+ }
+
+ if (ret)
+ pr_err("error %d sending packet to firmware\n", ret);
+
+ sdio_release_host(card->func);
+
+ kfree(packet);
+ }
+
+ lbs_deb_leave(LBS_DEB_SDIO);
+}
+
+/********************************************************************/
+/* Firmware */
+/********************************************************************/
+
+#define FW_DL_READY_STATUS (IF_SDIO_IO_RDY | IF_SDIO_DL_RDY)
+
+static int if_sdio_prog_helper(struct if_sdio_card *card,
+ const struct firmware *fw)
+{
+ int ret;
+ unsigned long timeout;
+ u8 *chunk_buffer;
+ u32 chunk_size;
+ const u8 *firmware;
+ size_t size;
+
+ lbs_deb_enter(LBS_DEB_SDIO);
+
+ chunk_buffer = kzalloc(64, GFP_KERNEL);
+ if (!chunk_buffer) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ sdio_claim_host(card->func);
+
+ ret = sdio_set_block_size(card->func, 32);
+ if (ret)
+ goto release;
+
+ firmware = fw->data;
+ size = fw->size;
+
+ while (size) {
+ ret = if_sdio_wait_status(card, FW_DL_READY_STATUS);
+ if (ret)
+ goto release;
+
+ /* On some platforms (like Davinci) the chip needs more time
+ * between helper blocks.
+ */
+ mdelay(2);
+
+ chunk_size = min_t(size_t, size, 60);
+
+ *((__le32*)chunk_buffer) = cpu_to_le32(chunk_size);
+ memcpy(chunk_buffer + 4, firmware, chunk_size);
+/*
+ lbs_deb_sdio("sending %d bytes chunk\n", chunk_size);
+*/
+ ret = sdio_writesb(card->func, card->ioport,
+ chunk_buffer, 64);
+ if (ret)
+ goto release;
+
+ firmware += chunk_size;
+ size -= chunk_size;
+ }
+
+ /* an empty block marks the end of the transfer */
+ memset(chunk_buffer, 0, 4);
+ ret = sdio_writesb(card->func, card->ioport, chunk_buffer, 64);
+ if (ret)
+ goto release;
+
+ lbs_deb_sdio("waiting for helper to boot...\n");
+
+ /* wait for the helper to boot by looking at the size register */
+ timeout = jiffies + HZ;
+ while (1) {
+ u16 req_size;
+
+ req_size = sdio_readb(card->func, IF_SDIO_RD_BASE, &ret);
+ if (ret)
+ goto release;
+
+ req_size |= sdio_readb(card->func, IF_SDIO_RD_BASE + 1, &ret) << 8;
+ if (ret)
+ goto release;
+
+ if (req_size != 0)
+ break;
+
+ if (time_after(jiffies, timeout)) {
+ ret = -ETIMEDOUT;
+ goto release;
+ }
+
+ msleep(10);
+ }
+
+ ret = 0;
+
+release:
+ sdio_release_host(card->func);
+ kfree(chunk_buffer);
+
+out:
+ if (ret)
+ pr_err("failed to load helper firmware\n");
+
+ lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
+ return ret;
+}
+
+static int if_sdio_prog_real(struct if_sdio_card *card,
+ const struct firmware *fw)
+{
+ int ret;
+ unsigned long timeout;
+ u8 *chunk_buffer;
+ u32 chunk_size;
+ const u8 *firmware;
+ size_t size, req_size;
+
+ lbs_deb_enter(LBS_DEB_SDIO);
+
+ chunk_buffer = kzalloc(512, GFP_KERNEL);
+ if (!chunk_buffer) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ sdio_claim_host(card->func);
+
+ ret = sdio_set_block_size(card->func, 32);
+ if (ret)
+ goto release;
+
+ firmware = fw->data;
+ size = fw->size;
+
+ while (size) {
+ timeout = jiffies + HZ;
+ while (1) {
+ ret = if_sdio_wait_status(card, FW_DL_READY_STATUS);
+ if (ret)
+ goto release;
+
+ req_size = sdio_readb(card->func, IF_SDIO_RD_BASE,
+ &ret);
+ if (ret)
+ goto release;
+
+ req_size |= sdio_readb(card->func, IF_SDIO_RD_BASE + 1,
+ &ret) << 8;
+ if (ret)
+ goto release;
+
+ /*
+ * For SD8688 wait until the length is not 0, 1 or 2
+ * before downloading the first FW block,
+ * since BOOT code writes the register to indicate the
+ * helper/FW download winner,
+ * the value could be 1 or 2 (Func1 or Func2).
+ */
+ if ((size != fw->size) || (req_size > 2))
+ break;
+ if (time_after(jiffies, timeout)) {
+ ret = -ETIMEDOUT;
+ goto release;
+ }
+ mdelay(1);
+ }
+
+/*
+ lbs_deb_sdio("firmware wants %d bytes\n", (int)req_size);
+*/
+ if (req_size == 0) {
+ lbs_deb_sdio("firmware helper gave up early\n");
+ ret = -EIO;
+ goto release;
+ }
+
+ if (req_size & 0x01) {
+ lbs_deb_sdio("firmware helper signalled error\n");
+ ret = -EIO;
+ goto release;
+ }
+
+ if (req_size > size)
+ req_size = size;
+
+ while (req_size) {
+ chunk_size = min_t(size_t, req_size, 512);
+
+ memcpy(chunk_buffer, firmware, chunk_size);
+/*
+ lbs_deb_sdio("sending %d bytes (%d bytes) chunk\n",
+ chunk_size, (chunk_size + 31) / 32 * 32);
+*/
+ ret = sdio_writesb(card->func, card->ioport,
+ chunk_buffer, roundup(chunk_size, 32));
+ if (ret)
+ goto release;
+
+ firmware += chunk_size;
+ size -= chunk_size;
+ req_size -= chunk_size;
+ }
+ }
+
+ ret = 0;
+
+ lbs_deb_sdio("waiting for firmware to boot...\n");
+
+ /* wait for the firmware to boot */
+ timeout = jiffies + HZ;
+ while (1) {
+ u16 scratch;
+
+ scratch = if_sdio_read_scratch(card, &ret);
+ if (ret)
+ goto release;
+
+ if (scratch == IF_SDIO_FIRMWARE_OK)
+ break;
+
+ if (time_after(jiffies, timeout)) {
+ ret = -ETIMEDOUT;
+ goto release;
+ }
+
+ msleep(10);
+ }
+
+ ret = 0;
+
+release:
+ sdio_release_host(card->func);
+ kfree(chunk_buffer);
+
+out:
+ if (ret)
+ pr_err("failed to load firmware\n");
+
+ lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
+ return ret;
+}
+
+static void if_sdio_do_prog_firmware(struct lbs_private *priv, int ret,
+ const struct firmware *helper,
+ const struct firmware *mainfw)
+{
+ struct if_sdio_card *card = priv->card;
+
+ if (ret) {
+ pr_err("failed to find firmware (%d)\n", ret);
+ return;
+ }
+
+ ret = if_sdio_prog_helper(card, helper);
+ if (ret)
+ return;
+
+ lbs_deb_sdio("Helper firmware loaded\n");
+
+ ret = if_sdio_prog_real(card, mainfw);
+ if (ret)
+ return;
+
+ lbs_deb_sdio("Firmware loaded\n");
+ if_sdio_finish_power_on(card);
+}
+
+static int if_sdio_prog_firmware(struct if_sdio_card *card)
+{
+ int ret;
+ u16 scratch;
+
+ lbs_deb_enter(LBS_DEB_SDIO);
+
+ /*
+ * Disable interrupts
+ */
+ sdio_claim_host(card->func);
+ sdio_writeb(card->func, 0x00, IF_SDIO_H_INT_MASK, &ret);
+ sdio_release_host(card->func);
+
+ sdio_claim_host(card->func);
+ scratch = if_sdio_read_scratch(card, &ret);
+ sdio_release_host(card->func);
+
+ lbs_deb_sdio("firmware status = %#x\n", scratch);
+ lbs_deb_sdio("scratch ret = %d\n", ret);
+
+ if (ret)
+ goto out;
+
+
+ /*
+ * The manual clearly describes that FEDC is the right code to use
+ * to detect firmware presence, but for SD8686 it is not that simple.
+ * Scratch is also used to store the RX packet length, so we lose
+ * the FEDC value early on. So we use a non-zero check in order
+ * to validate firmware presence.
+ * Additionally, the SD8686 in the Gumstix always has the high scratch
+ * bit set, even when the firmware is not loaded. So we have to
+ * exclude that from the test.
+ */
+ if (scratch == IF_SDIO_FIRMWARE_OK) {
+ lbs_deb_sdio("firmware already loaded\n");
+ if_sdio_finish_power_on(card);
+ return 0;
+ } else if ((card->model == MODEL_8686) && (scratch & 0x7fff)) {
+ lbs_deb_sdio("firmware may be running\n");
+ if_sdio_finish_power_on(card);
+ return 0;
+ }
+
+ ret = lbs_get_firmware_async(card->priv, &card->func->dev, card->model,
+ fw_table, if_sdio_do_prog_firmware);
+
+out:
+ lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
+ return ret;
+}
+
+/********************************************************************/
+/* Power management */
+/********************************************************************/
+
+/* Finish power on sequence (after firmware is loaded) */
+static void if_sdio_finish_power_on(struct if_sdio_card *card)
+{
+ struct sdio_func *func = card->func;
+ struct lbs_private *priv = card->priv;
+ int ret;
+
+ sdio_claim_host(func);
+ sdio_set_block_size(card->func, IF_SDIO_BLOCK_SIZE);
+
+ /*
+ * Get rx_unit if the chip is SD8688 or newer.
+ * SD8385 & SD8686 do not have rx_unit.
+ */
+ if ((card->model != MODEL_8385)
+ && (card->model != MODEL_8686))
+ card->rx_unit = if_sdio_read_rx_unit(card);
+ else
+ card->rx_unit = 0;
+
+ /*
+ * Set up the interrupt handler late.
+ *
+ * If we set it up earlier, the (buggy) hardware generates a spurious
+ * interrupt, even before the interrupt has been enabled, with
+ * CCCR_INTx = 0.
+ *
+ * We register the interrupt handler late so that we can handle any
+ * spurious interrupts, and also to avoid generation of that known
+ * spurious interrupt in the first place.
+ */
+ ret = sdio_claim_irq(func, if_sdio_interrupt);
+ if (ret)
+ goto release;
+
+ /*
+ * Enable interrupts now that everything is set up
+ */
+ sdio_writeb(func, 0x0f, IF_SDIO_H_INT_MASK, &ret);
+ if (ret)
+ goto release_irq;
+
+ sdio_release_host(func);
+
+ /* Set fw_ready before queuing any commands so that
+ * lbs_thread won't block from sending them to firmware.
+ */
+ priv->fw_ready = 1;
+
+ /*
+ * FUNC_INIT is required for SD8688 WLAN/BT multiple functions
+ */
+ if (card->model == MODEL_8688) {
+ struct cmd_header cmd;
+
+ memset(&cmd, 0, sizeof(cmd));
+
+ lbs_deb_sdio("send function INIT command\n");
+ if (__lbs_cmd(priv, CMD_FUNC_INIT, &cmd, sizeof(cmd),
+ lbs_cmd_copyback, (unsigned long) &cmd))
+ netdev_alert(priv->dev, "CMD_FUNC_INIT cmd failed\n");
+ }
+
+ wake_up(&card->pwron_waitq);
+
+ if (!card->started) {
+ ret = lbs_start_card(priv);
+ if_sdio_power_off(card);
+ if (ret == 0) {
+ card->started = true;
+ /* Tell PM core that we don't need the card to be
+ * powered now */
+ pm_runtime_put(&func->dev);
+ }
+ }
+
+ return;
+
+release_irq:
+ sdio_release_irq(func);
+release:
+ sdio_release_host(func);
+}
+
+static int if_sdio_power_on(struct if_sdio_card *card)
+{
+ struct sdio_func *func = card->func;
+ struct mmc_host *host = func->card->host;
+ int ret;
+
+ sdio_claim_host(func);
+
+ ret = sdio_enable_func(func);
+ if (ret)
+ goto release;
+
+ /* For 1-bit transfers to the 8686 model, we need to enable the
+ * interrupt flag in the CCCR register. Set the MMC_QUIRK_LENIENT_FN0
+ * bit to allow access to non-vendor registers. */
+ if ((card->model == MODEL_8686) &&
+ (host->caps & MMC_CAP_SDIO_IRQ) &&
+ (host->ios.bus_width == MMC_BUS_WIDTH_1)) {
+ u8 reg;
+
+ func->card->quirks |= MMC_QUIRK_LENIENT_FN0;
+ reg = sdio_f0_readb(func, SDIO_CCCR_IF, &ret);
+ if (ret)
+ goto disable;
+
+ reg |= SDIO_BUS_ECSI;
+ sdio_f0_writeb(func, reg, SDIO_CCCR_IF, &ret);
+ if (ret)
+ goto disable;
+ }
+
+ card->ioport = sdio_readb(func, IF_SDIO_IOPORT, &ret);
+ if (ret)
+ goto disable;
+
+ card->ioport |= sdio_readb(func, IF_SDIO_IOPORT + 1, &ret) << 8;
+ if (ret)
+ goto disable;
+
+ card->ioport |= sdio_readb(func, IF_SDIO_IOPORT + 2, &ret) << 16;
+ if (ret)
+ goto disable;
+
+ sdio_release_host(func);
+ ret = if_sdio_prog_firmware(card);
+ if (ret) {
+ sdio_claim_host(func);
+ goto disable;
+ }
+
+ return 0;
+
+disable:
+ sdio_disable_func(func);
+release:
+ sdio_release_host(func);
+ return ret;
+}
+
+static int if_sdio_power_off(struct if_sdio_card *card)
+{
+ struct sdio_func *func = card->func;
+ struct lbs_private *priv = card->priv;
+
+ priv->fw_ready = 0;
+
+ sdio_claim_host(func);
+ sdio_release_irq(func);
+ sdio_disable_func(func);
+ sdio_release_host(func);
+ return 0;
+}
+
+
+/*******************************************************************/
+/* Libertas callbacks */
+/*******************************************************************/
+
+static int if_sdio_host_to_card(struct lbs_private *priv,
+ u8 type, u8 *buf, u16 nb)
+{
+ int ret;
+ struct if_sdio_card *card;
+ struct if_sdio_packet *packet, *cur;
+ u16 size;
+ unsigned long flags;
+
+ lbs_deb_enter_args(LBS_DEB_SDIO, "type %d, bytes %d", type, nb);
+
+ card = priv->card;
+
+ if (nb > (65536 - sizeof(struct if_sdio_packet) - 4)) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ /*
+ * The transfer must be in one transaction or the firmware
+ * goes suicidal. There's no way to guarantee that for all
+ * controllers, but we can at least try.
+ */
+ size = sdio_align_size(card->func, nb + 4);
+
+ packet = kzalloc(sizeof(struct if_sdio_packet) + size,
+ GFP_ATOMIC);
+ if (!packet) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ packet->next = NULL;
+ packet->nb = size;
+
+ /*
+ * SDIO specific header.
+ */
+ packet->buffer[0] = (nb + 4) & 0xff;
+ packet->buffer[1] = ((nb + 4) >> 8) & 0xff;
+ packet->buffer[2] = type;
+ packet->buffer[3] = 0;
+
+ memcpy(packet->buffer + 4, buf, nb);
+
+ spin_lock_irqsave(&card->lock, flags);
+
+ if (!card->packets)
+ card->packets = packet;
+ else {
+ cur = card->packets;
+ while (cur->next)
+ cur = cur->next;
+ cur->next = packet;
+ }
+
+ switch (type) {
+ case MVMS_CMD:
+ priv->dnld_sent = DNLD_CMD_SENT;
+ break;
+ case MVMS_DAT:
+ priv->dnld_sent = DNLD_DATA_SENT;
+ break;
+ default:
+ lbs_deb_sdio("unknown packet type %d\n", (int)type);
+ }
+
+ spin_unlock_irqrestore(&card->lock, flags);
+
+ queue_work(card->workqueue, &card->packet_worker);
+
+ ret = 0;
+
+out:
+ lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
+
+ return ret;
+}
+
+static int if_sdio_enter_deep_sleep(struct lbs_private *priv)
+{
+ int ret = -1;
+ struct cmd_header cmd;
+
+ memset(&cmd, 0, sizeof(cmd));
+
+ lbs_deb_sdio("send DEEP_SLEEP command\n");
+ ret = __lbs_cmd(priv, CMD_802_11_DEEP_SLEEP, &cmd, sizeof(cmd),
+ lbs_cmd_copyback, (unsigned long) &cmd);
+ if (ret)
+ netdev_err(priv->dev, "DEEP_SLEEP cmd failed\n");
+
+ mdelay(200);
+ return ret;
+}
+
+static int if_sdio_exit_deep_sleep(struct lbs_private *priv)
+{
+ struct if_sdio_card *card = priv->card;
+ int ret = -1;
+
+ lbs_deb_enter(LBS_DEB_SDIO);
+ sdio_claim_host(card->func);
+
+ sdio_writeb(card->func, HOST_POWER_UP, CONFIGURATION_REG, &ret);
+ if (ret)
+ netdev_err(priv->dev, "sdio_writeb failed!\n");
+
+ sdio_release_host(card->func);
+ lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
+ return ret;
+}
+
+static int if_sdio_reset_deep_sleep_wakeup(struct lbs_private *priv)
+{
+ struct if_sdio_card *card = priv->card;
+ int ret = -1;
+
+ lbs_deb_enter(LBS_DEB_SDIO);
+ sdio_claim_host(card->func);
+
+ sdio_writeb(card->func, 0, CONFIGURATION_REG, &ret);
+ if (ret)
+ netdev_err(priv->dev, "sdio_writeb failed!\n");
+
+ sdio_release_host(card->func);
+ lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
+ return ret;
+
+}
+
+static struct mmc_host *reset_host;
+
+static void if_sdio_reset_card_worker(struct work_struct *work)
+{
+ /*
+ * The actual reset operation must be run outside of lbs_thread. This
+ * is because mmc_remove_host() will cause the device to be instantly
+ * destroyed, and the libertas driver then needs to end lbs_thread,
+ * leading to a deadlock.
+ *
+ * We run it in a workqueue totally independent from the if_sdio_card
+ * instance for that reason.
+ */
+
+ pr_info("Resetting card...");
+ mmc_remove_host(reset_host);
+ mmc_add_host(reset_host);
+}
+static DECLARE_WORK(card_reset_work, if_sdio_reset_card_worker);
+
+static void if_sdio_reset_card(struct lbs_private *priv)
+{
+ struct if_sdio_card *card = priv->card;
+
+ if (work_pending(&card_reset_work))
+ return;
+
+ reset_host = card->func->card->host;
+ schedule_work(&card_reset_work);
+}
+
+static int if_sdio_power_save(struct lbs_private *priv)
+{
+ struct if_sdio_card *card = priv->card;
+ int ret;
+
+ flush_workqueue(card->workqueue);
+
+ ret = if_sdio_power_off(card);
+
+ /* Let runtime PM know the card is powered off */
+ pm_runtime_put_sync(&card->func->dev);
+
+ return ret;
+}
+
+static int if_sdio_power_restore(struct lbs_private *priv)
+{
+ struct if_sdio_card *card = priv->card;
+ int r;
+
+ /* Make sure the card will not be powered off by runtime PM */
+ pm_runtime_get_sync(&card->func->dev);
+
+ r = if_sdio_power_on(card);
+ if (r)
+ return r;
+
+ wait_event(card->pwron_waitq, priv->fw_ready);
+ return 0;
+}
+
+
+/*******************************************************************/
+/* SDIO callbacks */
+/*******************************************************************/
+
+static void if_sdio_interrupt(struct sdio_func *func)
+{
+ int ret;
+ struct if_sdio_card *card;
+ u8 cause;
+
+ lbs_deb_enter(LBS_DEB_SDIO);
+
+ card = sdio_get_drvdata(func);
+
+ cause = sdio_readb(card->func, IF_SDIO_H_INT_STATUS, &ret);
+ if (ret || !cause)
+ goto out;
+
+ lbs_deb_sdio("interrupt: 0x%X\n", (unsigned)cause);
+
+ sdio_writeb(card->func, ~cause, IF_SDIO_H_INT_STATUS, &ret);
+ if (ret)
+ goto out;
+
+ /*
+ * Ignore the define name, this really means the card has
+ * successfully received the command.
+ */
+ card->priv->is_activity_detected = 1;
+ if (cause & IF_SDIO_H_INT_DNLD)
+ lbs_host_to_card_done(card->priv);
+
+
+ if (cause & IF_SDIO_H_INT_UPLD) {
+ ret = if_sdio_card_to_host(card);
+ if (ret)
+ goto out;
+ }
+
+ ret = 0;
+
+out:
+ lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
+}
+
+static int if_sdio_probe(struct sdio_func *func,
+ const struct sdio_device_id *id)
+{
+ struct if_sdio_card *card;
+ struct lbs_private *priv;
+ int ret, i;
+ unsigned int model;
+ struct if_sdio_packet *packet;
+
+ lbs_deb_enter(LBS_DEB_SDIO);
+
+ for (i = 0;i < func->card->num_info;i++) {
+ if (sscanf(func->card->info[i],
+ "802.11 SDIO ID: %x", &model) == 1)
+ break;
+ if (sscanf(func->card->info[i],
+ "ID: %x", &model) == 1)
+ break;
+ if (!strcmp(func->card->info[i], "IBIS Wireless SDIO Card")) {
+ model = MODEL_8385;
+ break;
+ }
+ }
+
+ if (i == func->card->num_info) {
+ pr_err("unable to identify card model\n");
+ return -ENODEV;
+ }
+
+ card = kzalloc(sizeof(struct if_sdio_card), GFP_KERNEL);
+ if (!card)
+ return -ENOMEM;
+
+ card->func = func;
+ card->model = model;
+
+ switch (card->model) {
+ case MODEL_8385:
+ card->scratch_reg = IF_SDIO_SCRATCH_OLD;
+ break;
+ case MODEL_8686:
+ card->scratch_reg = IF_SDIO_SCRATCH;
+ break;
+ case MODEL_8688:
+ default: /* for newer chipsets */
+ card->scratch_reg = IF_SDIO_FW_STATUS;
+ break;
+ }
+
+ spin_lock_init(&card->lock);
+ card->workqueue = create_workqueue("libertas_sdio");
+ INIT_WORK(&card->packet_worker, if_sdio_host_to_card_worker);
+ init_waitqueue_head(&card->pwron_waitq);
+
+ /* Check if we support this card */
+ for (i = 0; i < ARRAY_SIZE(fw_table); i++) {
+ if (card->model == fw_table[i].model)
+ break;
+ }
+ if (i == ARRAY_SIZE(fw_table)) {
+ pr_err("unknown card model 0x%x\n", card->model);
+ ret = -ENODEV;
+ goto free;
+ }
+
+ sdio_set_drvdata(func, card);
+
+ lbs_deb_sdio("class = 0x%X, vendor = 0x%X, "
+ "device = 0x%X, model = 0x%X, ioport = 0x%X\n",
+ func->class, func->vendor, func->device,
+ model, (unsigned)card->ioport);
+
+
+ priv = lbs_add_card(card, &func->dev);
+ if (!priv) {
+ ret = -ENOMEM;
+ goto free;
+ }
+
+ card->priv = priv;
+
+ priv->card = card;
+ priv->hw_host_to_card = if_sdio_host_to_card;
+ priv->enter_deep_sleep = if_sdio_enter_deep_sleep;
+ priv->exit_deep_sleep = if_sdio_exit_deep_sleep;
+ priv->reset_deep_sleep_wakeup = if_sdio_reset_deep_sleep_wakeup;
+ priv->reset_card = if_sdio_reset_card;
+ priv->power_save = if_sdio_power_save;
+ priv->power_restore = if_sdio_power_restore;
+
+ ret = if_sdio_power_on(card);
+ if (ret)
+ goto err_activate_card;
+
+out:
+ lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
+
+ return ret;
+
+err_activate_card:
+ flush_workqueue(card->workqueue);
+ lbs_remove_card(priv);
+free:
+ destroy_workqueue(card->workqueue);
+ while (card->packets) {
+ packet = card->packets;
+ card->packets = card->packets->next;
+ kfree(packet);
+ }
+
+ kfree(card);
+
+ goto out;
+}
+
+static void if_sdio_remove(struct sdio_func *func)
+{
+ struct if_sdio_card *card;
+ struct if_sdio_packet *packet;
+
+ lbs_deb_enter(LBS_DEB_SDIO);
+
+ card = sdio_get_drvdata(func);
+
+ /* Undo decrement done above in if_sdio_probe */
+ pm_runtime_get_noresume(&func->dev);
+
+ if (user_rmmod && (card->model == MODEL_8688)) {
+ /*
+ * FUNC_SHUTDOWN is required for SD8688 WLAN/BT
+ * multiple functions
+ */
+ struct cmd_header cmd;
+
+ memset(&cmd, 0, sizeof(cmd));
+
+ lbs_deb_sdio("send function SHUTDOWN command\n");
+ if (__lbs_cmd(card->priv, CMD_FUNC_SHUTDOWN,
+ &cmd, sizeof(cmd), lbs_cmd_copyback,
+ (unsigned long) &cmd))
+ pr_alert("CMD_FUNC_SHUTDOWN cmd failed\n");
+ }
+
+
+ lbs_deb_sdio("call remove card\n");
+ lbs_stop_card(card->priv);
+ lbs_remove_card(card->priv);
+
+ flush_workqueue(card->workqueue);
+ destroy_workqueue(card->workqueue);
+
+ while (card->packets) {
+ packet = card->packets;
+ card->packets = card->packets->next;
+ kfree(packet);
+ }
+
+ kfree(card);
+ lbs_deb_leave(LBS_DEB_SDIO);
+}
+
+static int if_sdio_suspend(struct device *dev)
+{
+ struct sdio_func *func = dev_to_sdio_func(dev);
+ int ret;
+ struct if_sdio_card *card = sdio_get_drvdata(func);
+
+ mmc_pm_flag_t flags = sdio_get_host_pm_caps(func);
+
+ /* If we're powered off anyway, just let the mmc layer remove the
+ * card. */
+ if (!lbs_iface_active(card->priv))
+ return -ENOSYS;
+
+ dev_info(dev, "%s: suspend: PM flags = 0x%x\n",
+ sdio_func_id(func), flags);
+
+ /* If we aren't being asked to wake on anything, we should bail out
+ * and let the SD stack power down the card.
+ */
+ if (card->priv->wol_criteria == EHS_REMOVE_WAKEUP) {
+ dev_info(dev, "Suspend without wake params -- powering down card\n");
+ return -ENOSYS;
+ }
+
+ if (!(flags & MMC_PM_KEEP_POWER)) {
+ dev_err(dev, "%s: cannot remain alive while host is suspended\n",
+ sdio_func_id(func));
+ return -ENOSYS;
+ }
+
+ ret = sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER);
+ if (ret)
+ return ret;
+
+ ret = lbs_suspend(card->priv);
+ if (ret)
+ return ret;
+
+ return sdio_set_host_pm_flags(func, MMC_PM_WAKE_SDIO_IRQ);
+}
+
+static int if_sdio_resume(struct device *dev)
+{
+ struct sdio_func *func = dev_to_sdio_func(dev);
+ struct if_sdio_card *card = sdio_get_drvdata(func);
+ int ret;
+
+ dev_info(dev, "%s: resume: we're back\n", sdio_func_id(func));
+
+ ret = lbs_resume(card->priv);
+
+ return ret;
+}
+
+static const struct dev_pm_ops if_sdio_pm_ops = {
+ .suspend = if_sdio_suspend,
+ .resume = if_sdio_resume,
+};
+
+static struct sdio_driver if_sdio_driver = {
+ .name = "libertas_sdio",
+ .id_table = if_sdio_ids,
+ .probe = if_sdio_probe,
+ .remove = if_sdio_remove,
+ .drv = {
+ .pm = &if_sdio_pm_ops,
+ },
+};
+
+/*******************************************************************/
+/* Module functions */
+/*******************************************************************/
+
+static int __init if_sdio_init_module(void)
+{
+ int ret = 0;
+
+ lbs_deb_enter(LBS_DEB_SDIO);
+
+ printk(KERN_INFO "libertas_sdio: Libertas SDIO driver\n");
+ printk(KERN_INFO "libertas_sdio: Copyright Pierre Ossman\n");
+
+ ret = sdio_register_driver(&if_sdio_driver);
+
+ /* Clear the flag in case user removes the card. */
+ user_rmmod = 0;
+
+ lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
+
+ return ret;
+}
+
+static void __exit if_sdio_exit_module(void)
+{
+ lbs_deb_enter(LBS_DEB_SDIO);
+
+ /* Set the flag as user is removing this module. */
+ user_rmmod = 1;
+
+ cancel_work_sync(&card_reset_work);
+
+ sdio_unregister_driver(&if_sdio_driver);
+
+ lbs_deb_leave(LBS_DEB_SDIO);
+}
+
+module_init(if_sdio_init_module);
+module_exit(if_sdio_exit_module);
+
+MODULE_DESCRIPTION("Libertas SDIO WLAN Driver");
+MODULE_AUTHOR("Pierre Ossman");
+MODULE_LICENSE("GPL");