summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/net/wireless/iwlegacy/4965-mac.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/net/wireless/iwlegacy/4965-mac.c')
-rw-r--r--kernel/drivers/net/wireless/iwlegacy/4965-mac.c6866
1 files changed, 6866 insertions, 0 deletions
diff --git a/kernel/drivers/net/wireless/iwlegacy/4965-mac.c b/kernel/drivers/net/wireless/iwlegacy/4965-mac.c
new file mode 100644
index 000000000..976f65fe9
--- /dev/null
+++ b/kernel/drivers/net/wireless/iwlegacy/4965-mac.c
@@ -0,0 +1,6866 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
+ *
+ * Portions of this file are derived from the ipw3945 project, as well
+ * as portions of the ieee80211 subsystem header files.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci-aspm.h>
+#include <linux/slab.h>
+#include <linux/dma-mapping.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/firmware.h>
+#include <linux/etherdevice.h>
+#include <linux/if_arp.h>
+
+#include <net/mac80211.h>
+
+#include <asm/div64.h>
+
+#define DRV_NAME "iwl4965"
+
+#include "common.h"
+#include "4965.h"
+
+/******************************************************************************
+ *
+ * module boiler plate
+ *
+ ******************************************************************************/
+
+/*
+ * module name, copyright, version, etc.
+ */
+#define DRV_DESCRIPTION "Intel(R) Wireless WiFi 4965 driver for Linux"
+
+#ifdef CONFIG_IWLEGACY_DEBUG
+#define VD "d"
+#else
+#define VD
+#endif
+
+#define DRV_VERSION IWLWIFI_VERSION VD
+
+MODULE_DESCRIPTION(DRV_DESCRIPTION);
+MODULE_VERSION(DRV_VERSION);
+MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR);
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("iwl4965");
+
+void
+il4965_check_abort_status(struct il_priv *il, u8 frame_count, u32 status)
+{
+ if (frame_count == 1 && status == TX_STATUS_FAIL_RFKILL_FLUSH) {
+ IL_ERR("Tx flush command to flush out all frames\n");
+ if (!test_bit(S_EXIT_PENDING, &il->status))
+ queue_work(il->workqueue, &il->tx_flush);
+ }
+}
+
+/*
+ * EEPROM
+ */
+struct il_mod_params il4965_mod_params = {
+ .restart_fw = 1,
+ /* the rest are 0 by default */
+};
+
+void
+il4965_rx_queue_reset(struct il_priv *il, struct il_rx_queue *rxq)
+{
+ unsigned long flags;
+ int i;
+ spin_lock_irqsave(&rxq->lock, flags);
+ INIT_LIST_HEAD(&rxq->rx_free);
+ INIT_LIST_HEAD(&rxq->rx_used);
+ /* Fill the rx_used queue with _all_ of the Rx buffers */
+ for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) {
+ /* In the reset function, these buffers may have been allocated
+ * to an SKB, so we need to unmap and free potential storage */
+ if (rxq->pool[i].page != NULL) {
+ pci_unmap_page(il->pci_dev, rxq->pool[i].page_dma,
+ PAGE_SIZE << il->hw_params.rx_page_order,
+ PCI_DMA_FROMDEVICE);
+ __il_free_pages(il, rxq->pool[i].page);
+ rxq->pool[i].page = NULL;
+ }
+ list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
+ }
+
+ for (i = 0; i < RX_QUEUE_SIZE; i++)
+ rxq->queue[i] = NULL;
+
+ /* Set us so that we have processed and used all buffers, but have
+ * not restocked the Rx queue with fresh buffers */
+ rxq->read = rxq->write = 0;
+ rxq->write_actual = 0;
+ rxq->free_count = 0;
+ spin_unlock_irqrestore(&rxq->lock, flags);
+}
+
+int
+il4965_rx_init(struct il_priv *il, struct il_rx_queue *rxq)
+{
+ u32 rb_size;
+ const u32 rfdnlog = RX_QUEUE_SIZE_LOG; /* 256 RBDs */
+ u32 rb_timeout = 0;
+
+ if (il->cfg->mod_params->amsdu_size_8K)
+ rb_size = FH49_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K;
+ else
+ rb_size = FH49_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K;
+
+ /* Stop Rx DMA */
+ il_wr(il, FH49_MEM_RCSR_CHNL0_CONFIG_REG, 0);
+
+ /* Reset driver's Rx queue write idx */
+ il_wr(il, FH49_RSCSR_CHNL0_RBDCB_WPTR_REG, 0);
+
+ /* Tell device where to find RBD circular buffer in DRAM */
+ il_wr(il, FH49_RSCSR_CHNL0_RBDCB_BASE_REG, (u32) (rxq->bd_dma >> 8));
+
+ /* Tell device where in DRAM to update its Rx status */
+ il_wr(il, FH49_RSCSR_CHNL0_STTS_WPTR_REG, rxq->rb_stts_dma >> 4);
+
+ /* Enable Rx DMA
+ * Direct rx interrupts to hosts
+ * Rx buffer size 4 or 8k
+ * RB timeout 0x10
+ * 256 RBDs
+ */
+ il_wr(il, FH49_MEM_RCSR_CHNL0_CONFIG_REG,
+ FH49_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL |
+ FH49_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL |
+ FH49_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MSK |
+ rb_size |
+ (rb_timeout << FH49_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS) |
+ (rfdnlog << FH49_RCSR_RX_CONFIG_RBDCB_SIZE_POS));
+
+ /* Set interrupt coalescing timer to default (2048 usecs) */
+ il_write8(il, CSR_INT_COALESCING, IL_HOST_INT_TIMEOUT_DEF);
+
+ return 0;
+}
+
+static void
+il4965_set_pwr_vmain(struct il_priv *il)
+{
+/*
+ * (for documentation purposes)
+ * to set power to V_AUX, do:
+
+ if (pci_pme_capable(il->pci_dev, PCI_D3cold))
+ il_set_bits_mask_prph(il, APMG_PS_CTRL_REG,
+ APMG_PS_CTRL_VAL_PWR_SRC_VAUX,
+ ~APMG_PS_CTRL_MSK_PWR_SRC);
+ */
+
+ il_set_bits_mask_prph(il, APMG_PS_CTRL_REG,
+ APMG_PS_CTRL_VAL_PWR_SRC_VMAIN,
+ ~APMG_PS_CTRL_MSK_PWR_SRC);
+}
+
+int
+il4965_hw_nic_init(struct il_priv *il)
+{
+ unsigned long flags;
+ struct il_rx_queue *rxq = &il->rxq;
+ int ret;
+
+ spin_lock_irqsave(&il->lock, flags);
+ il_apm_init(il);
+ /* Set interrupt coalescing calibration timer to default (512 usecs) */
+ il_write8(il, CSR_INT_COALESCING, IL_HOST_INT_CALIB_TIMEOUT_DEF);
+ spin_unlock_irqrestore(&il->lock, flags);
+
+ il4965_set_pwr_vmain(il);
+ il4965_nic_config(il);
+
+ /* Allocate the RX queue, or reset if it is already allocated */
+ if (!rxq->bd) {
+ ret = il_rx_queue_alloc(il);
+ if (ret) {
+ IL_ERR("Unable to initialize Rx queue\n");
+ return -ENOMEM;
+ }
+ } else
+ il4965_rx_queue_reset(il, rxq);
+
+ il4965_rx_replenish(il);
+
+ il4965_rx_init(il, rxq);
+
+ spin_lock_irqsave(&il->lock, flags);
+
+ rxq->need_update = 1;
+ il_rx_queue_update_write_ptr(il, rxq);
+
+ spin_unlock_irqrestore(&il->lock, flags);
+
+ /* Allocate or reset and init all Tx and Command queues */
+ if (!il->txq) {
+ ret = il4965_txq_ctx_alloc(il);
+ if (ret)
+ return ret;
+ } else
+ il4965_txq_ctx_reset(il);
+
+ set_bit(S_INIT, &il->status);
+
+ return 0;
+}
+
+/**
+ * il4965_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr
+ */
+static inline __le32
+il4965_dma_addr2rbd_ptr(struct il_priv *il, dma_addr_t dma_addr)
+{
+ return cpu_to_le32((u32) (dma_addr >> 8));
+}
+
+/**
+ * il4965_rx_queue_restock - refill RX queue from pre-allocated pool
+ *
+ * If there are slots in the RX queue that need to be restocked,
+ * and we have free pre-allocated buffers, fill the ranks as much
+ * as we can, pulling from rx_free.
+ *
+ * This moves the 'write' idx forward to catch up with 'processed', and
+ * also updates the memory address in the firmware to reference the new
+ * target buffer.
+ */
+void
+il4965_rx_queue_restock(struct il_priv *il)
+{
+ struct il_rx_queue *rxq = &il->rxq;
+ struct list_head *element;
+ struct il_rx_buf *rxb;
+ unsigned long flags;
+
+ spin_lock_irqsave(&rxq->lock, flags);
+ while (il_rx_queue_space(rxq) > 0 && rxq->free_count) {
+ /* The overwritten rxb must be a used one */
+ rxb = rxq->queue[rxq->write];
+ BUG_ON(rxb && rxb->page);
+
+ /* Get next free Rx buffer, remove from free list */
+ element = rxq->rx_free.next;
+ rxb = list_entry(element, struct il_rx_buf, list);
+ list_del(element);
+
+ /* Point to Rx buffer via next RBD in circular buffer */
+ rxq->bd[rxq->write] =
+ il4965_dma_addr2rbd_ptr(il, rxb->page_dma);
+ rxq->queue[rxq->write] = rxb;
+ rxq->write = (rxq->write + 1) & RX_QUEUE_MASK;
+ rxq->free_count--;
+ }
+ spin_unlock_irqrestore(&rxq->lock, flags);
+ /* If the pre-allocated buffer pool is dropping low, schedule to
+ * refill it */
+ if (rxq->free_count <= RX_LOW_WATERMARK)
+ queue_work(il->workqueue, &il->rx_replenish);
+
+ /* If we've added more space for the firmware to place data, tell it.
+ * Increment device's write pointer in multiples of 8. */
+ if (rxq->write_actual != (rxq->write & ~0x7)) {
+ spin_lock_irqsave(&rxq->lock, flags);
+ rxq->need_update = 1;
+ spin_unlock_irqrestore(&rxq->lock, flags);
+ il_rx_queue_update_write_ptr(il, rxq);
+ }
+}
+
+/**
+ * il4965_rx_replenish - Move all used packet from rx_used to rx_free
+ *
+ * When moving to rx_free an SKB is allocated for the slot.
+ *
+ * Also restock the Rx queue via il_rx_queue_restock.
+ * This is called as a scheduled work item (except for during initialization)
+ */
+static void
+il4965_rx_allocate(struct il_priv *il, gfp_t priority)
+{
+ struct il_rx_queue *rxq = &il->rxq;
+ struct list_head *element;
+ struct il_rx_buf *rxb;
+ struct page *page;
+ dma_addr_t page_dma;
+ unsigned long flags;
+ gfp_t gfp_mask = priority;
+
+ while (1) {
+ spin_lock_irqsave(&rxq->lock, flags);
+ if (list_empty(&rxq->rx_used)) {
+ spin_unlock_irqrestore(&rxq->lock, flags);
+ return;
+ }
+ spin_unlock_irqrestore(&rxq->lock, flags);
+
+ if (rxq->free_count > RX_LOW_WATERMARK)
+ gfp_mask |= __GFP_NOWARN;
+
+ if (il->hw_params.rx_page_order > 0)
+ gfp_mask |= __GFP_COMP;
+
+ /* Alloc a new receive buffer */
+ page = alloc_pages(gfp_mask, il->hw_params.rx_page_order);
+ if (!page) {
+ if (net_ratelimit())
+ D_INFO("alloc_pages failed, " "order: %d\n",
+ il->hw_params.rx_page_order);
+
+ if (rxq->free_count <= RX_LOW_WATERMARK &&
+ net_ratelimit())
+ IL_ERR("Failed to alloc_pages with %s. "
+ "Only %u free buffers remaining.\n",
+ priority ==
+ GFP_ATOMIC ? "GFP_ATOMIC" : "GFP_KERNEL",
+ rxq->free_count);
+ /* We don't reschedule replenish work here -- we will
+ * call the restock method and if it still needs
+ * more buffers it will schedule replenish */
+ return;
+ }
+
+ /* Get physical address of the RB */
+ page_dma =
+ pci_map_page(il->pci_dev, page, 0,
+ PAGE_SIZE << il->hw_params.rx_page_order,
+ PCI_DMA_FROMDEVICE);
+ if (unlikely(pci_dma_mapping_error(il->pci_dev, page_dma))) {
+ __free_pages(page, il->hw_params.rx_page_order);
+ break;
+ }
+
+ spin_lock_irqsave(&rxq->lock, flags);
+
+ if (list_empty(&rxq->rx_used)) {
+ spin_unlock_irqrestore(&rxq->lock, flags);
+ pci_unmap_page(il->pci_dev, page_dma,
+ PAGE_SIZE << il->hw_params.rx_page_order,
+ PCI_DMA_FROMDEVICE);
+ __free_pages(page, il->hw_params.rx_page_order);
+ return;
+ }
+
+ element = rxq->rx_used.next;
+ rxb = list_entry(element, struct il_rx_buf, list);
+ list_del(element);
+
+ BUG_ON(rxb->page);
+
+ rxb->page = page;
+ rxb->page_dma = page_dma;
+ list_add_tail(&rxb->list, &rxq->rx_free);
+ rxq->free_count++;
+ il->alloc_rxb_page++;
+
+ spin_unlock_irqrestore(&rxq->lock, flags);
+ }
+}
+
+void
+il4965_rx_replenish(struct il_priv *il)
+{
+ unsigned long flags;
+
+ il4965_rx_allocate(il, GFP_KERNEL);
+
+ spin_lock_irqsave(&il->lock, flags);
+ il4965_rx_queue_restock(il);
+ spin_unlock_irqrestore(&il->lock, flags);
+}
+
+void
+il4965_rx_replenish_now(struct il_priv *il)
+{
+ il4965_rx_allocate(il, GFP_ATOMIC);
+
+ il4965_rx_queue_restock(il);
+}
+
+/* Assumes that the skb field of the buffers in 'pool' is kept accurate.
+ * If an SKB has been detached, the POOL needs to have its SKB set to NULL
+ * This free routine walks the list of POOL entries and if SKB is set to
+ * non NULL it is unmapped and freed
+ */
+void
+il4965_rx_queue_free(struct il_priv *il, struct il_rx_queue *rxq)
+{
+ int i;
+ for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) {
+ if (rxq->pool[i].page != NULL) {
+ pci_unmap_page(il->pci_dev, rxq->pool[i].page_dma,
+ PAGE_SIZE << il->hw_params.rx_page_order,
+ PCI_DMA_FROMDEVICE);
+ __il_free_pages(il, rxq->pool[i].page);
+ rxq->pool[i].page = NULL;
+ }
+ }
+
+ dma_free_coherent(&il->pci_dev->dev, 4 * RX_QUEUE_SIZE, rxq->bd,
+ rxq->bd_dma);
+ dma_free_coherent(&il->pci_dev->dev, sizeof(struct il_rb_status),
+ rxq->rb_stts, rxq->rb_stts_dma);
+ rxq->bd = NULL;
+ rxq->rb_stts = NULL;
+}
+
+int
+il4965_rxq_stop(struct il_priv *il)
+{
+ int ret;
+
+ _il_wr(il, FH49_MEM_RCSR_CHNL0_CONFIG_REG, 0);
+ ret = _il_poll_bit(il, FH49_MEM_RSSR_RX_STATUS_REG,
+ FH49_RSSR_CHNL0_RX_STATUS_CHNL_IDLE,
+ FH49_RSSR_CHNL0_RX_STATUS_CHNL_IDLE,
+ 1000);
+ if (ret < 0)
+ IL_ERR("Can't stop Rx DMA.\n");
+
+ return 0;
+}
+
+int
+il4965_hwrate_to_mac80211_idx(u32 rate_n_flags, enum ieee80211_band band)
+{
+ int idx = 0;
+ int band_offset = 0;
+
+ /* HT rate format: mac80211 wants an MCS number, which is just LSB */
+ if (rate_n_flags & RATE_MCS_HT_MSK) {
+ idx = (rate_n_flags & 0xff);
+ return idx;
+ /* Legacy rate format, search for match in table */
+ } else {
+ if (band == IEEE80211_BAND_5GHZ)
+ band_offset = IL_FIRST_OFDM_RATE;
+ for (idx = band_offset; idx < RATE_COUNT_LEGACY; idx++)
+ if (il_rates[idx].plcp == (rate_n_flags & 0xFF))
+ return idx - band_offset;
+ }
+
+ return -1;
+}
+
+static int
+il4965_calc_rssi(struct il_priv *il, struct il_rx_phy_res *rx_resp)
+{
+ /* data from PHY/DSP regarding signal strength, etc.,
+ * contents are always there, not configurable by host. */
+ struct il4965_rx_non_cfg_phy *ncphy =
+ (struct il4965_rx_non_cfg_phy *)rx_resp->non_cfg_phy_buf;
+ u32 agc =
+ (le16_to_cpu(ncphy->agc_info) & IL49_AGC_DB_MASK) >>
+ IL49_AGC_DB_POS;
+
+ u32 valid_antennae =
+ (le16_to_cpu(rx_resp->phy_flags) & IL49_RX_PHY_FLAGS_ANTENNAE_MASK)
+ >> IL49_RX_PHY_FLAGS_ANTENNAE_OFFSET;
+ u8 max_rssi = 0;
+ u32 i;
+
+ /* Find max rssi among 3 possible receivers.
+ * These values are measured by the digital signal processor (DSP).
+ * They should stay fairly constant even as the signal strength varies,
+ * if the radio's automatic gain control (AGC) is working right.
+ * AGC value (see below) will provide the "interesting" info. */
+ for (i = 0; i < 3; i++)
+ if (valid_antennae & (1 << i))
+ max_rssi = max(ncphy->rssi_info[i << 1], max_rssi);
+
+ D_STATS("Rssi In A %d B %d C %d Max %d AGC dB %d\n",
+ ncphy->rssi_info[0], ncphy->rssi_info[2], ncphy->rssi_info[4],
+ max_rssi, agc);
+
+ /* dBm = max_rssi dB - agc dB - constant.
+ * Higher AGC (higher radio gain) means lower signal. */
+ return max_rssi - agc - IL4965_RSSI_OFFSET;
+}
+
+static u32
+il4965_translate_rx_status(struct il_priv *il, u32 decrypt_in)
+{
+ u32 decrypt_out = 0;
+
+ if ((decrypt_in & RX_RES_STATUS_STATION_FOUND) ==
+ RX_RES_STATUS_STATION_FOUND)
+ decrypt_out |=
+ (RX_RES_STATUS_STATION_FOUND |
+ RX_RES_STATUS_NO_STATION_INFO_MISMATCH);
+
+ decrypt_out |= (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK);
+
+ /* packet was not encrypted */
+ if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) ==
+ RX_RES_STATUS_SEC_TYPE_NONE)
+ return decrypt_out;
+
+ /* packet was encrypted with unknown alg */
+ if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) ==
+ RX_RES_STATUS_SEC_TYPE_ERR)
+ return decrypt_out;
+
+ /* decryption was not done in HW */
+ if ((decrypt_in & RX_MPDU_RES_STATUS_DEC_DONE_MSK) !=
+ RX_MPDU_RES_STATUS_DEC_DONE_MSK)
+ return decrypt_out;
+
+ switch (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) {
+
+ case RX_RES_STATUS_SEC_TYPE_CCMP:
+ /* alg is CCM: check MIC only */
+ if (!(decrypt_in & RX_MPDU_RES_STATUS_MIC_OK))
+ /* Bad MIC */
+ decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC;
+ else
+ decrypt_out |= RX_RES_STATUS_DECRYPT_OK;
+
+ break;
+
+ case RX_RES_STATUS_SEC_TYPE_TKIP:
+ if (!(decrypt_in & RX_MPDU_RES_STATUS_TTAK_OK)) {
+ /* Bad TTAK */
+ decrypt_out |= RX_RES_STATUS_BAD_KEY_TTAK;
+ break;
+ }
+ /* fall through if TTAK OK */
+ default:
+ if (!(decrypt_in & RX_MPDU_RES_STATUS_ICV_OK))
+ decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC;
+ else
+ decrypt_out |= RX_RES_STATUS_DECRYPT_OK;
+ break;
+ }
+
+ D_RX("decrypt_in:0x%x decrypt_out = 0x%x\n", decrypt_in, decrypt_out);
+
+ return decrypt_out;
+}
+
+#define SMALL_PACKET_SIZE 256
+
+static void
+il4965_pass_packet_to_mac80211(struct il_priv *il, struct ieee80211_hdr *hdr,
+ u32 len, u32 ampdu_status, struct il_rx_buf *rxb,
+ struct ieee80211_rx_status *stats)
+{
+ struct sk_buff *skb;
+ __le16 fc = hdr->frame_control;
+
+ /* We only process data packets if the interface is open */
+ if (unlikely(!il->is_open)) {
+ D_DROP("Dropping packet while interface is not open.\n");
+ return;
+ }
+
+ if (unlikely(test_bit(IL_STOP_REASON_PASSIVE, &il->stop_reason))) {
+ il_wake_queues_by_reason(il, IL_STOP_REASON_PASSIVE);
+ D_INFO("Woke queues - frame received on passive channel\n");
+ }
+
+ /* In case of HW accelerated crypto and bad decryption, drop */
+ if (!il->cfg->mod_params->sw_crypto &&
+ il_set_decrypted_flag(il, hdr, ampdu_status, stats))
+ return;
+
+ skb = dev_alloc_skb(SMALL_PACKET_SIZE);
+ if (!skb) {
+ IL_ERR("dev_alloc_skb failed\n");
+ return;
+ }
+
+ if (len <= SMALL_PACKET_SIZE) {
+ memcpy(skb_put(skb, len), hdr, len);
+ } else {
+ skb_add_rx_frag(skb, 0, rxb->page, (void *)hdr - rxb_addr(rxb),
+ len, PAGE_SIZE << il->hw_params.rx_page_order);
+ il->alloc_rxb_page--;
+ rxb->page = NULL;
+ }
+
+ il_update_stats(il, false, fc, len);
+ memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats));
+
+ ieee80211_rx(il->hw, skb);
+}
+
+/* Called for N_RX (legacy ABG frames), or
+ * N_RX_MPDU (HT high-throughput N frames). */
+static void
+il4965_hdl_rx(struct il_priv *il, struct il_rx_buf *rxb)
+{
+ struct ieee80211_hdr *header;
+ struct ieee80211_rx_status rx_status = {};
+ struct il_rx_pkt *pkt = rxb_addr(rxb);
+ struct il_rx_phy_res *phy_res;
+ __le32 rx_pkt_status;
+ struct il_rx_mpdu_res_start *amsdu;
+ u32 len;
+ u32 ampdu_status;
+ u32 rate_n_flags;
+
+ /**
+ * N_RX and N_RX_MPDU are handled differently.
+ * N_RX: physical layer info is in this buffer
+ * N_RX_MPDU: physical layer info was sent in separate
+ * command and cached in il->last_phy_res
+ *
+ * Here we set up local variables depending on which command is
+ * received.
+ */
+ if (pkt->hdr.cmd == N_RX) {
+ phy_res = (struct il_rx_phy_res *)pkt->u.raw;
+ header =
+ (struct ieee80211_hdr *)(pkt->u.raw + sizeof(*phy_res) +
+ phy_res->cfg_phy_cnt);
+
+ len = le16_to_cpu(phy_res->byte_count);
+ rx_pkt_status =
+ *(__le32 *) (pkt->u.raw + sizeof(*phy_res) +
+ phy_res->cfg_phy_cnt + len);
+ ampdu_status = le32_to_cpu(rx_pkt_status);
+ } else {
+ if (!il->_4965.last_phy_res_valid) {
+ IL_ERR("MPDU frame without cached PHY data\n");
+ return;
+ }
+ phy_res = &il->_4965.last_phy_res;
+ amsdu = (struct il_rx_mpdu_res_start *)pkt->u.raw;
+ header = (struct ieee80211_hdr *)(pkt->u.raw + sizeof(*amsdu));
+ len = le16_to_cpu(amsdu->byte_count);
+ rx_pkt_status = *(__le32 *) (pkt->u.raw + sizeof(*amsdu) + len);
+ ampdu_status =
+ il4965_translate_rx_status(il, le32_to_cpu(rx_pkt_status));
+ }
+
+ if ((unlikely(phy_res->cfg_phy_cnt > 20))) {
+ D_DROP("dsp size out of range [0,20]: %d\n",
+ phy_res->cfg_phy_cnt);
+ return;
+ }
+
+ if (!(rx_pkt_status & RX_RES_STATUS_NO_CRC32_ERROR) ||
+ !(rx_pkt_status & RX_RES_STATUS_NO_RXE_OVERFLOW)) {
+ D_RX("Bad CRC or FIFO: 0x%08X.\n", le32_to_cpu(rx_pkt_status));
+ return;
+ }
+
+ /* This will be used in several places later */
+ rate_n_flags = le32_to_cpu(phy_res->rate_n_flags);
+
+ /* rx_status carries information about the packet to mac80211 */
+ rx_status.mactime = le64_to_cpu(phy_res->timestamp);
+ rx_status.band =
+ (phy_res->
+ phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ? IEEE80211_BAND_2GHZ :
+ IEEE80211_BAND_5GHZ;
+ rx_status.freq =
+ ieee80211_channel_to_frequency(le16_to_cpu(phy_res->channel),
+ rx_status.band);
+ rx_status.rate_idx =
+ il4965_hwrate_to_mac80211_idx(rate_n_flags, rx_status.band);
+ rx_status.flag = 0;
+
+ /* TSF isn't reliable. In order to allow smooth user experience,
+ * this W/A doesn't propagate it to the mac80211 */
+ /*rx_status.flag |= RX_FLAG_MACTIME_START; */
+
+ il->ucode_beacon_time = le32_to_cpu(phy_res->beacon_time_stamp);
+
+ /* Find max signal strength (dBm) among 3 antenna/receiver chains */
+ rx_status.signal = il4965_calc_rssi(il, phy_res);
+
+ D_STATS("Rssi %d, TSF %llu\n", rx_status.signal,
+ (unsigned long long)rx_status.mactime);
+
+ /*
+ * "antenna number"
+ *
+ * It seems that the antenna field in the phy flags value
+ * is actually a bit field. This is undefined by radiotap,
+ * it wants an actual antenna number but I always get "7"
+ * for most legacy frames I receive indicating that the
+ * same frame was received on all three RX chains.
+ *
+ * I think this field should be removed in favor of a
+ * new 802.11n radiotap field "RX chains" that is defined
+ * as a bitmask.
+ */
+ rx_status.antenna =
+ (le16_to_cpu(phy_res->phy_flags) & RX_RES_PHY_FLAGS_ANTENNA_MSK) >>
+ RX_RES_PHY_FLAGS_ANTENNA_POS;
+
+ /* set the preamble flag if appropriate */
+ if (phy_res->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK)
+ rx_status.flag |= RX_FLAG_SHORTPRE;
+
+ /* Set up the HT phy flags */
+ if (rate_n_flags & RATE_MCS_HT_MSK)
+ rx_status.flag |= RX_FLAG_HT;
+ if (rate_n_flags & RATE_MCS_HT40_MSK)
+ rx_status.flag |= RX_FLAG_40MHZ;
+ if (rate_n_flags & RATE_MCS_SGI_MSK)
+ rx_status.flag |= RX_FLAG_SHORT_GI;
+
+ if (phy_res->phy_flags & RX_RES_PHY_FLAGS_AGG_MSK) {
+ /* We know which subframes of an A-MPDU belong
+ * together since we get a single PHY response
+ * from the firmware for all of them.
+ */
+
+ rx_status.flag |= RX_FLAG_AMPDU_DETAILS;
+ rx_status.ampdu_reference = il->_4965.ampdu_ref;
+ }
+
+ il4965_pass_packet_to_mac80211(il, header, len, ampdu_status, rxb,
+ &rx_status);
+}
+
+/* Cache phy data (Rx signal strength, etc) for HT frame (N_RX_PHY).
+ * This will be used later in il_hdl_rx() for N_RX_MPDU. */
+static void
+il4965_hdl_rx_phy(struct il_priv *il, struct il_rx_buf *rxb)
+{
+ struct il_rx_pkt *pkt = rxb_addr(rxb);
+ il->_4965.last_phy_res_valid = true;
+ il->_4965.ampdu_ref++;
+ memcpy(&il->_4965.last_phy_res, pkt->u.raw,
+ sizeof(struct il_rx_phy_res));
+}
+
+static int
+il4965_get_channels_for_scan(struct il_priv *il, struct ieee80211_vif *vif,
+ enum ieee80211_band band, u8 is_active,
+ u8 n_probes, struct il_scan_channel *scan_ch)
+{
+ struct ieee80211_channel *chan;
+ const struct ieee80211_supported_band *sband;
+ const struct il_channel_info *ch_info;
+ u16 passive_dwell = 0;
+ u16 active_dwell = 0;
+ int added, i;
+ u16 channel;
+
+ sband = il_get_hw_mode(il, band);
+ if (!sband)
+ return 0;
+
+ active_dwell = il_get_active_dwell_time(il, band, n_probes);
+ passive_dwell = il_get_passive_dwell_time(il, band, vif);
+
+ if (passive_dwell <= active_dwell)
+ passive_dwell = active_dwell + 1;
+
+ for (i = 0, added = 0; i < il->scan_request->n_channels; i++) {
+ chan = il->scan_request->channels[i];
+
+ if (chan->band != band)
+ continue;
+
+ channel = chan->hw_value;
+ scan_ch->channel = cpu_to_le16(channel);
+
+ ch_info = il_get_channel_info(il, band, channel);
+ if (!il_is_channel_valid(ch_info)) {
+ D_SCAN("Channel %d is INVALID for this band.\n",
+ channel);
+ continue;
+ }
+
+ if (!is_active || il_is_channel_passive(ch_info) ||
+ (chan->flags & IEEE80211_CHAN_NO_IR))
+ scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE;
+ else
+ scan_ch->type = SCAN_CHANNEL_TYPE_ACTIVE;
+
+ if (n_probes)
+ scan_ch->type |= IL_SCAN_PROBE_MASK(n_probes);
+
+ scan_ch->active_dwell = cpu_to_le16(active_dwell);
+ scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
+
+ /* Set txpower levels to defaults */
+ scan_ch->dsp_atten = 110;
+
+ /* NOTE: if we were doing 6Mb OFDM for scans we'd use
+ * power level:
+ * scan_ch->tx_gain = ((1 << 5) | (2 << 3)) | 3;
+ */
+ if (band == IEEE80211_BAND_5GHZ)
+ scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3;
+ else
+ scan_ch->tx_gain = ((1 << 5) | (5 << 3));
+
+ D_SCAN("Scanning ch=%d prob=0x%X [%s %d]\n", channel,
+ le32_to_cpu(scan_ch->type),
+ (scan_ch->
+ type & SCAN_CHANNEL_TYPE_ACTIVE) ? "ACTIVE" : "PASSIVE",
+ (scan_ch->
+ type & SCAN_CHANNEL_TYPE_ACTIVE) ? active_dwell :
+ passive_dwell);
+
+ scan_ch++;
+ added++;
+ }
+
+ D_SCAN("total channels to scan %d\n", added);
+ return added;
+}
+
+static void
+il4965_toggle_tx_ant(struct il_priv *il, u8 *ant, u8 valid)
+{
+ int i;
+ u8 ind = *ant;
+
+ for (i = 0; i < RATE_ANT_NUM - 1; i++) {
+ ind = (ind + 1) < RATE_ANT_NUM ? ind + 1 : 0;
+ if (valid & BIT(ind)) {
+ *ant = ind;
+ return;
+ }
+ }
+}
+
+int
+il4965_request_scan(struct il_priv *il, struct ieee80211_vif *vif)
+{
+ struct il_host_cmd cmd = {
+ .id = C_SCAN,
+ .len = sizeof(struct il_scan_cmd),
+ .flags = CMD_SIZE_HUGE,
+ };
+ struct il_scan_cmd *scan;
+ u32 rate_flags = 0;
+ u16 cmd_len;
+ u16 rx_chain = 0;
+ enum ieee80211_band band;
+ u8 n_probes = 0;
+ u8 rx_ant = il->hw_params.valid_rx_ant;
+ u8 rate;
+ bool is_active = false;
+ int chan_mod;
+ u8 active_chains;
+ u8 scan_tx_antennas = il->hw_params.valid_tx_ant;
+ int ret;
+
+ lockdep_assert_held(&il->mutex);
+
+ if (!il->scan_cmd) {
+ il->scan_cmd =
+ kmalloc(sizeof(struct il_scan_cmd) + IL_MAX_SCAN_SIZE,
+ GFP_KERNEL);
+ if (!il->scan_cmd) {
+ D_SCAN("fail to allocate memory for scan\n");
+ return -ENOMEM;
+ }
+ }
+ scan = il->scan_cmd;
+ memset(scan, 0, sizeof(struct il_scan_cmd) + IL_MAX_SCAN_SIZE);
+
+ scan->quiet_plcp_th = IL_PLCP_QUIET_THRESH;
+ scan->quiet_time = IL_ACTIVE_QUIET_TIME;
+
+ if (il_is_any_associated(il)) {
+ u16 interval;
+ u32 extra;
+ u32 suspend_time = 100;
+ u32 scan_suspend_time = 100;
+
+ D_INFO("Scanning while associated...\n");
+ interval = vif->bss_conf.beacon_int;
+
+ scan->suspend_time = 0;
+ scan->max_out_time = cpu_to_le32(200 * 1024);
+ if (!interval)
+ interval = suspend_time;
+
+ extra = (suspend_time / interval) << 22;
+ scan_suspend_time =
+ (extra | ((suspend_time % interval) * 1024));
+ scan->suspend_time = cpu_to_le32(scan_suspend_time);
+ D_SCAN("suspend_time 0x%X beacon interval %d\n",
+ scan_suspend_time, interval);
+ }
+
+ if (il->scan_request->n_ssids) {
+ int i, p = 0;
+ D_SCAN("Kicking off active scan\n");
+ for (i = 0; i < il->scan_request->n_ssids; i++) {
+ /* always does wildcard anyway */
+ if (!il->scan_request->ssids[i].ssid_len)
+ continue;
+ scan->direct_scan[p].id = WLAN_EID_SSID;
+ scan->direct_scan[p].len =
+ il->scan_request->ssids[i].ssid_len;
+ memcpy(scan->direct_scan[p].ssid,
+ il->scan_request->ssids[i].ssid,
+ il->scan_request->ssids[i].ssid_len);
+ n_probes++;
+ p++;
+ }
+ is_active = true;
+ } else
+ D_SCAN("Start passive scan.\n");
+
+ scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK;
+ scan->tx_cmd.sta_id = il->hw_params.bcast_id;
+ scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
+
+ switch (il->scan_band) {
+ case IEEE80211_BAND_2GHZ:
+ scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
+ chan_mod =
+ le32_to_cpu(il->active.flags & RXON_FLG_CHANNEL_MODE_MSK) >>
+ RXON_FLG_CHANNEL_MODE_POS;
+ if (chan_mod == CHANNEL_MODE_PURE_40) {
+ rate = RATE_6M_PLCP;
+ } else {
+ rate = RATE_1M_PLCP;
+ rate_flags = RATE_MCS_CCK_MSK;
+ }
+ break;
+ case IEEE80211_BAND_5GHZ:
+ rate = RATE_6M_PLCP;
+ break;
+ default:
+ IL_WARN("Invalid scan band\n");
+ return -EIO;
+ }
+
+ /*
+ * If active scanning is requested but a certain channel is
+ * marked passive, we can do active scanning if we detect
+ * transmissions.
+ *
+ * There is an issue with some firmware versions that triggers
+ * a sysassert on a "good CRC threshold" of zero (== disabled),
+ * on a radar channel even though this means that we should NOT
+ * send probes.
+ *
+ * The "good CRC threshold" is the number of frames that we
+ * need to receive during our dwell time on a channel before
+ * sending out probes -- setting this to a huge value will
+ * mean we never reach it, but at the same time work around
+ * the aforementioned issue. Thus use IL_GOOD_CRC_TH_NEVER
+ * here instead of IL_GOOD_CRC_TH_DISABLED.
+ */
+ scan->good_CRC_th =
+ is_active ? IL_GOOD_CRC_TH_DEFAULT : IL_GOOD_CRC_TH_NEVER;
+
+ band = il->scan_band;
+
+ if (il->cfg->scan_rx_antennas[band])
+ rx_ant = il->cfg->scan_rx_antennas[band];
+
+ il4965_toggle_tx_ant(il, &il->scan_tx_ant[band], scan_tx_antennas);
+ rate_flags |= BIT(il->scan_tx_ant[band]) << RATE_MCS_ANT_POS;
+ scan->tx_cmd.rate_n_flags = cpu_to_le32(rate | rate_flags);
+
+ /* In power save mode use one chain, otherwise use all chains */
+ if (test_bit(S_POWER_PMI, &il->status)) {
+ /* rx_ant has been set to all valid chains previously */
+ active_chains =
+ rx_ant & ((u8) (il->chain_noise_data.active_chains));
+ if (!active_chains)
+ active_chains = rx_ant;
+
+ D_SCAN("chain_noise_data.active_chains: %u\n",
+ il->chain_noise_data.active_chains);
+
+ rx_ant = il4965_first_antenna(active_chains);
+ }
+
+ /* MIMO is not used here, but value is required */
+ rx_chain |= il->hw_params.valid_rx_ant << RXON_RX_CHAIN_VALID_POS;
+ rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS;
+ rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_SEL_POS;
+ rx_chain |= 0x1 << RXON_RX_CHAIN_DRIVER_FORCE_POS;
+ scan->rx_chain = cpu_to_le16(rx_chain);
+
+ cmd_len =
+ il_fill_probe_req(il, (struct ieee80211_mgmt *)scan->data,
+ vif->addr, il->scan_request->ie,
+ il->scan_request->ie_len,
+ IL_MAX_SCAN_SIZE - sizeof(*scan));
+ scan->tx_cmd.len = cpu_to_le16(cmd_len);
+
+ scan->filter_flags |=
+ (RXON_FILTER_ACCEPT_GRP_MSK | RXON_FILTER_BCON_AWARE_MSK);
+
+ scan->channel_count =
+ il4965_get_channels_for_scan(il, vif, band, is_active, n_probes,
+ (void *)&scan->data[cmd_len]);
+ if (scan->channel_count == 0) {
+ D_SCAN("channel count %d\n", scan->channel_count);
+ return -EIO;
+ }
+
+ cmd.len +=
+ le16_to_cpu(scan->tx_cmd.len) +
+ scan->channel_count * sizeof(struct il_scan_channel);
+ cmd.data = scan;
+ scan->len = cpu_to_le16(cmd.len);
+
+ set_bit(S_SCAN_HW, &il->status);
+
+ ret = il_send_cmd_sync(il, &cmd);
+ if (ret)
+ clear_bit(S_SCAN_HW, &il->status);
+
+ return ret;
+}
+
+int
+il4965_manage_ibss_station(struct il_priv *il, struct ieee80211_vif *vif,
+ bool add)
+{
+ struct il_vif_priv *vif_priv = (void *)vif->drv_priv;
+
+ if (add)
+ return il4965_add_bssid_station(il, vif->bss_conf.bssid,
+ &vif_priv->ibss_bssid_sta_id);
+ return il_remove_station(il, vif_priv->ibss_bssid_sta_id,
+ vif->bss_conf.bssid);
+}
+
+void
+il4965_free_tfds_in_queue(struct il_priv *il, int sta_id, int tid, int freed)
+{
+ lockdep_assert_held(&il->sta_lock);
+
+ if (il->stations[sta_id].tid[tid].tfds_in_queue >= freed)
+ il->stations[sta_id].tid[tid].tfds_in_queue -= freed;
+ else {
+ D_TX("free more than tfds_in_queue (%u:%d)\n",
+ il->stations[sta_id].tid[tid].tfds_in_queue, freed);
+ il->stations[sta_id].tid[tid].tfds_in_queue = 0;
+ }
+}
+
+#define IL_TX_QUEUE_MSK 0xfffff
+
+static bool
+il4965_is_single_rx_stream(struct il_priv *il)
+{
+ return il->current_ht_config.smps == IEEE80211_SMPS_STATIC ||
+ il->current_ht_config.single_chain_sufficient;
+}
+
+#define IL_NUM_RX_CHAINS_MULTIPLE 3
+#define IL_NUM_RX_CHAINS_SINGLE 2
+#define IL_NUM_IDLE_CHAINS_DUAL 2
+#define IL_NUM_IDLE_CHAINS_SINGLE 1
+
+/*
+ * Determine how many receiver/antenna chains to use.
+ *
+ * More provides better reception via diversity. Fewer saves power
+ * at the expense of throughput, but only when not in powersave to
+ * start with.
+ *
+ * MIMO (dual stream) requires at least 2, but works better with 3.
+ * This does not determine *which* chains to use, just how many.
+ */
+static int
+il4965_get_active_rx_chain_count(struct il_priv *il)
+{
+ /* # of Rx chains to use when expecting MIMO. */
+ if (il4965_is_single_rx_stream(il))
+ return IL_NUM_RX_CHAINS_SINGLE;
+ else
+ return IL_NUM_RX_CHAINS_MULTIPLE;
+}
+
+/*
+ * When we are in power saving mode, unless device support spatial
+ * multiplexing power save, use the active count for rx chain count.
+ */
+static int
+il4965_get_idle_rx_chain_count(struct il_priv *il, int active_cnt)
+{
+ /* # Rx chains when idling, depending on SMPS mode */
+ switch (il->current_ht_config.smps) {
+ case IEEE80211_SMPS_STATIC:
+ case IEEE80211_SMPS_DYNAMIC:
+ return IL_NUM_IDLE_CHAINS_SINGLE;
+ case IEEE80211_SMPS_OFF:
+ return active_cnt;
+ default:
+ WARN(1, "invalid SMPS mode %d", il->current_ht_config.smps);
+ return active_cnt;
+ }
+}
+
+/* up to 4 chains */
+static u8
+il4965_count_chain_bitmap(u32 chain_bitmap)
+{
+ u8 res;
+ res = (chain_bitmap & BIT(0)) >> 0;
+ res += (chain_bitmap & BIT(1)) >> 1;
+ res += (chain_bitmap & BIT(2)) >> 2;
+ res += (chain_bitmap & BIT(3)) >> 3;
+ return res;
+}
+
+/**
+ * il4965_set_rxon_chain - Set up Rx chain usage in "staging" RXON image
+ *
+ * Selects how many and which Rx receivers/antennas/chains to use.
+ * This should not be used for scan command ... it puts data in wrong place.
+ */
+void
+il4965_set_rxon_chain(struct il_priv *il)
+{
+ bool is_single = il4965_is_single_rx_stream(il);
+ bool is_cam = !test_bit(S_POWER_PMI, &il->status);
+ u8 idle_rx_cnt, active_rx_cnt, valid_rx_cnt;
+ u32 active_chains;
+ u16 rx_chain;
+
+ /* Tell uCode which antennas are actually connected.
+ * Before first association, we assume all antennas are connected.
+ * Just after first association, il4965_chain_noise_calibration()
+ * checks which antennas actually *are* connected. */
+ if (il->chain_noise_data.active_chains)
+ active_chains = il->chain_noise_data.active_chains;
+ else
+ active_chains = il->hw_params.valid_rx_ant;
+
+ rx_chain = active_chains << RXON_RX_CHAIN_VALID_POS;
+
+ /* How many receivers should we use? */
+ active_rx_cnt = il4965_get_active_rx_chain_count(il);
+ idle_rx_cnt = il4965_get_idle_rx_chain_count(il, active_rx_cnt);
+
+ /* correct rx chain count according hw settings
+ * and chain noise calibration
+ */
+ valid_rx_cnt = il4965_count_chain_bitmap(active_chains);
+ if (valid_rx_cnt < active_rx_cnt)
+ active_rx_cnt = valid_rx_cnt;
+
+ if (valid_rx_cnt < idle_rx_cnt)
+ idle_rx_cnt = valid_rx_cnt;
+
+ rx_chain |= active_rx_cnt << RXON_RX_CHAIN_MIMO_CNT_POS;
+ rx_chain |= idle_rx_cnt << RXON_RX_CHAIN_CNT_POS;
+
+ il->staging.rx_chain = cpu_to_le16(rx_chain);
+
+ if (!is_single && active_rx_cnt >= IL_NUM_RX_CHAINS_SINGLE && is_cam)
+ il->staging.rx_chain |= RXON_RX_CHAIN_MIMO_FORCE_MSK;
+ else
+ il->staging.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK;
+
+ D_ASSOC("rx_chain=0x%X active=%d idle=%d\n", il->staging.rx_chain,
+ active_rx_cnt, idle_rx_cnt);
+
+ WARN_ON(active_rx_cnt == 0 || idle_rx_cnt == 0 ||
+ active_rx_cnt < idle_rx_cnt);
+}
+
+static const char *
+il4965_get_fh_string(int cmd)
+{
+ switch (cmd) {
+ IL_CMD(FH49_RSCSR_CHNL0_STTS_WPTR_REG);
+ IL_CMD(FH49_RSCSR_CHNL0_RBDCB_BASE_REG);
+ IL_CMD(FH49_RSCSR_CHNL0_WPTR);
+ IL_CMD(FH49_MEM_RCSR_CHNL0_CONFIG_REG);
+ IL_CMD(FH49_MEM_RSSR_SHARED_CTRL_REG);
+ IL_CMD(FH49_MEM_RSSR_RX_STATUS_REG);
+ IL_CMD(FH49_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV);
+ IL_CMD(FH49_TSSR_TX_STATUS_REG);
+ IL_CMD(FH49_TSSR_TX_ERROR_REG);
+ default:
+ return "UNKNOWN";
+ }
+}
+
+int
+il4965_dump_fh(struct il_priv *il, char **buf, bool display)
+{
+ int i;
+#ifdef CONFIG_IWLEGACY_DEBUG
+ int pos = 0;
+ size_t bufsz = 0;
+#endif
+ static const u32 fh_tbl[] = {
+ FH49_RSCSR_CHNL0_STTS_WPTR_REG,
+ FH49_RSCSR_CHNL0_RBDCB_BASE_REG,
+ FH49_RSCSR_CHNL0_WPTR,
+ FH49_MEM_RCSR_CHNL0_CONFIG_REG,
+ FH49_MEM_RSSR_SHARED_CTRL_REG,
+ FH49_MEM_RSSR_RX_STATUS_REG,
+ FH49_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV,
+ FH49_TSSR_TX_STATUS_REG,
+ FH49_TSSR_TX_ERROR_REG
+ };
+#ifdef CONFIG_IWLEGACY_DEBUG
+ if (display) {
+ bufsz = ARRAY_SIZE(fh_tbl) * 48 + 40;
+ *buf = kmalloc(bufsz, GFP_KERNEL);
+ if (!*buf)
+ return -ENOMEM;
+ pos +=
+ scnprintf(*buf + pos, bufsz - pos, "FH register values:\n");
+ for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) {
+ pos +=
+ scnprintf(*buf + pos, bufsz - pos,
+ " %34s: 0X%08x\n",
+ il4965_get_fh_string(fh_tbl[i]),
+ il_rd(il, fh_tbl[i]));
+ }
+ return pos;
+ }
+#endif
+ IL_ERR("FH register values:\n");
+ for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) {
+ IL_ERR(" %34s: 0X%08x\n", il4965_get_fh_string(fh_tbl[i]),
+ il_rd(il, fh_tbl[i]));
+ }
+ return 0;
+}
+
+static void
+il4965_hdl_missed_beacon(struct il_priv *il, struct il_rx_buf *rxb)
+{
+ struct il_rx_pkt *pkt = rxb_addr(rxb);
+ struct il_missed_beacon_notif *missed_beacon;
+
+ missed_beacon = &pkt->u.missed_beacon;
+ if (le32_to_cpu(missed_beacon->consecutive_missed_beacons) >
+ il->missed_beacon_threshold) {
+ D_CALIB("missed bcn cnsq %d totl %d rcd %d expctd %d\n",
+ le32_to_cpu(missed_beacon->consecutive_missed_beacons),
+ le32_to_cpu(missed_beacon->total_missed_becons),
+ le32_to_cpu(missed_beacon->num_recvd_beacons),
+ le32_to_cpu(missed_beacon->num_expected_beacons));
+ if (!test_bit(S_SCANNING, &il->status))
+ il4965_init_sensitivity(il);
+ }
+}
+
+/* Calculate noise level, based on measurements during network silence just
+ * before arriving beacon. This measurement can be done only if we know
+ * exactly when to expect beacons, therefore only when we're associated. */
+static void
+il4965_rx_calc_noise(struct il_priv *il)
+{
+ struct stats_rx_non_phy *rx_info;
+ int num_active_rx = 0;
+ int total_silence = 0;
+ int bcn_silence_a, bcn_silence_b, bcn_silence_c;
+ int last_rx_noise;
+
+ rx_info = &(il->_4965.stats.rx.general);
+ bcn_silence_a =
+ le32_to_cpu(rx_info->beacon_silence_rssi_a) & IN_BAND_FILTER;
+ bcn_silence_b =
+ le32_to_cpu(rx_info->beacon_silence_rssi_b) & IN_BAND_FILTER;
+ bcn_silence_c =
+ le32_to_cpu(rx_info->beacon_silence_rssi_c) & IN_BAND_FILTER;
+
+ if (bcn_silence_a) {
+ total_silence += bcn_silence_a;
+ num_active_rx++;
+ }
+ if (bcn_silence_b) {
+ total_silence += bcn_silence_b;
+ num_active_rx++;
+ }
+ if (bcn_silence_c) {
+ total_silence += bcn_silence_c;
+ num_active_rx++;
+ }
+
+ /* Average among active antennas */
+ if (num_active_rx)
+ last_rx_noise = (total_silence / num_active_rx) - 107;
+ else
+ last_rx_noise = IL_NOISE_MEAS_NOT_AVAILABLE;
+
+ D_CALIB("inband silence a %u, b %u, c %u, dBm %d\n", bcn_silence_a,
+ bcn_silence_b, bcn_silence_c, last_rx_noise);
+}
+
+#ifdef CONFIG_IWLEGACY_DEBUGFS
+/*
+ * based on the assumption of all stats counter are in DWORD
+ * FIXME: This function is for debugging, do not deal with
+ * the case of counters roll-over.
+ */
+static void
+il4965_accumulative_stats(struct il_priv *il, __le32 * stats)
+{
+ int i, size;
+ __le32 *prev_stats;
+ u32 *accum_stats;
+ u32 *delta, *max_delta;
+ struct stats_general_common *general, *accum_general;
+ struct stats_tx *tx, *accum_tx;
+
+ prev_stats = (__le32 *) &il->_4965.stats;
+ accum_stats = (u32 *) &il->_4965.accum_stats;
+ size = sizeof(struct il_notif_stats);
+ general = &il->_4965.stats.general.common;
+ accum_general = &il->_4965.accum_stats.general.common;
+ tx = &il->_4965.stats.tx;
+ accum_tx = &il->_4965.accum_stats.tx;
+ delta = (u32 *) &il->_4965.delta_stats;
+ max_delta = (u32 *) &il->_4965.max_delta;
+
+ for (i = sizeof(__le32); i < size;
+ i +=
+ sizeof(__le32), stats++, prev_stats++, delta++, max_delta++,
+ accum_stats++) {
+ if (le32_to_cpu(*stats) > le32_to_cpu(*prev_stats)) {
+ *delta =
+ (le32_to_cpu(*stats) - le32_to_cpu(*prev_stats));
+ *accum_stats += *delta;
+ if (*delta > *max_delta)
+ *max_delta = *delta;
+ }
+ }
+
+ /* reset accumulative stats for "no-counter" type stats */
+ accum_general->temperature = general->temperature;
+ accum_general->ttl_timestamp = general->ttl_timestamp;
+}
+#endif
+
+static void
+il4965_hdl_stats(struct il_priv *il, struct il_rx_buf *rxb)
+{
+ const int recalib_seconds = 60;
+ bool change;
+ struct il_rx_pkt *pkt = rxb_addr(rxb);
+
+ D_RX("Statistics notification received (%d vs %d).\n",
+ (int)sizeof(struct il_notif_stats),
+ le32_to_cpu(pkt->len_n_flags) & IL_RX_FRAME_SIZE_MSK);
+
+ change =
+ ((il->_4965.stats.general.common.temperature !=
+ pkt->u.stats.general.common.temperature) ||
+ ((il->_4965.stats.flag & STATS_REPLY_FLG_HT40_MODE_MSK) !=
+ (pkt->u.stats.flag & STATS_REPLY_FLG_HT40_MODE_MSK)));
+#ifdef CONFIG_IWLEGACY_DEBUGFS
+ il4965_accumulative_stats(il, (__le32 *) &pkt->u.stats);
+#endif
+
+ /* TODO: reading some of stats is unneeded */
+ memcpy(&il->_4965.stats, &pkt->u.stats, sizeof(il->_4965.stats));
+
+ set_bit(S_STATS, &il->status);
+
+ /*
+ * Reschedule the stats timer to occur in recalib_seconds to ensure
+ * we get a thermal update even if the uCode doesn't give us one
+ */
+ mod_timer(&il->stats_periodic,
+ jiffies + msecs_to_jiffies(recalib_seconds * 1000));
+
+ if (unlikely(!test_bit(S_SCANNING, &il->status)) &&
+ (pkt->hdr.cmd == N_STATS)) {
+ il4965_rx_calc_noise(il);
+ queue_work(il->workqueue, &il->run_time_calib_work);
+ }
+
+ if (change)
+ il4965_temperature_calib(il);
+}
+
+static void
+il4965_hdl_c_stats(struct il_priv *il, struct il_rx_buf *rxb)
+{
+ struct il_rx_pkt *pkt = rxb_addr(rxb);
+
+ if (le32_to_cpu(pkt->u.stats.flag) & UCODE_STATS_CLEAR_MSK) {
+#ifdef CONFIG_IWLEGACY_DEBUGFS
+ memset(&il->_4965.accum_stats, 0,
+ sizeof(struct il_notif_stats));
+ memset(&il->_4965.delta_stats, 0,
+ sizeof(struct il_notif_stats));
+ memset(&il->_4965.max_delta, 0, sizeof(struct il_notif_stats));
+#endif
+ D_RX("Statistics have been cleared\n");
+ }
+ il4965_hdl_stats(il, rxb);
+}
+
+
+/*
+ * mac80211 queues, ACs, hardware queues, FIFOs.
+ *
+ * Cf. http://wireless.kernel.org/en/developers/Documentation/mac80211/queues
+ *
+ * Mac80211 uses the following numbers, which we get as from it
+ * by way of skb_get_queue_mapping(skb):
+ *
+ * VO 0
+ * VI 1
+ * BE 2
+ * BK 3
+ *
+ *
+ * Regular (not A-MPDU) frames are put into hardware queues corresponding
+ * to the FIFOs, see comments in iwl-prph.h. Aggregated frames get their
+ * own queue per aggregation session (RA/TID combination), such queues are
+ * set up to map into FIFOs too, for which we need an AC->FIFO mapping. In
+ * order to map frames to the right queue, we also need an AC->hw queue
+ * mapping. This is implemented here.
+ *
+ * Due to the way hw queues are set up (by the hw specific modules like
+ * 4965.c), the AC->hw queue mapping is the identity
+ * mapping.
+ */
+
+static const u8 tid_to_ac[] = {
+ IEEE80211_AC_BE,
+ IEEE80211_AC_BK,
+ IEEE80211_AC_BK,
+ IEEE80211_AC_BE,
+ IEEE80211_AC_VI,
+ IEEE80211_AC_VI,
+ IEEE80211_AC_VO,
+ IEEE80211_AC_VO
+};
+
+static inline int
+il4965_get_ac_from_tid(u16 tid)
+{
+ if (likely(tid < ARRAY_SIZE(tid_to_ac)))
+ return tid_to_ac[tid];
+
+ /* no support for TIDs 8-15 yet */
+ return -EINVAL;
+}
+
+static inline int
+il4965_get_fifo_from_tid(u16 tid)
+{
+ const u8 ac_to_fifo[] = {
+ IL_TX_FIFO_VO,
+ IL_TX_FIFO_VI,
+ IL_TX_FIFO_BE,
+ IL_TX_FIFO_BK,
+ };
+
+ if (likely(tid < ARRAY_SIZE(tid_to_ac)))
+ return ac_to_fifo[tid_to_ac[tid]];
+
+ /* no support for TIDs 8-15 yet */
+ return -EINVAL;
+}
+
+/*
+ * handle build C_TX command notification.
+ */
+static void
+il4965_tx_cmd_build_basic(struct il_priv *il, struct sk_buff *skb,
+ struct il_tx_cmd *tx_cmd,
+ struct ieee80211_tx_info *info,
+ struct ieee80211_hdr *hdr, u8 std_id)
+{
+ __le16 fc = hdr->frame_control;
+ __le32 tx_flags = tx_cmd->tx_flags;
+
+ tx_cmd->stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
+ if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) {
+ tx_flags |= TX_CMD_FLG_ACK_MSK;
+ if (ieee80211_is_mgmt(fc))
+ tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
+ if (ieee80211_is_probe_resp(fc) &&
+ !(le16_to_cpu(hdr->seq_ctrl) & 0xf))
+ tx_flags |= TX_CMD_FLG_TSF_MSK;
+ } else {
+ tx_flags &= (~TX_CMD_FLG_ACK_MSK);
+ tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
+ }
+
+ if (ieee80211_is_back_req(fc))
+ tx_flags |= TX_CMD_FLG_ACK_MSK | TX_CMD_FLG_IMM_BA_RSP_MASK;
+
+ tx_cmd->sta_id = std_id;
+ if (ieee80211_has_morefrags(fc))
+ tx_flags |= TX_CMD_FLG_MORE_FRAG_MSK;
+
+ if (ieee80211_is_data_qos(fc)) {
+ u8 *qc = ieee80211_get_qos_ctl(hdr);
+ tx_cmd->tid_tspec = qc[0] & 0xf;
+ tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK;
+ } else {
+ tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
+ }
+
+ il_tx_cmd_protection(il, info, fc, &tx_flags);
+
+ tx_flags &= ~(TX_CMD_FLG_ANT_SEL_MSK);
+ if (ieee80211_is_mgmt(fc)) {
+ if (ieee80211_is_assoc_req(fc) || ieee80211_is_reassoc_req(fc))
+ tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(3);
+ else
+ tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(2);
+ } else {
+ tx_cmd->timeout.pm_frame_timeout = 0;
+ }
+
+ tx_cmd->driver_txop = 0;
+ tx_cmd->tx_flags = tx_flags;
+ tx_cmd->next_frame_len = 0;
+}
+
+static void
+il4965_tx_cmd_build_rate(struct il_priv *il,
+ struct il_tx_cmd *tx_cmd,
+ struct ieee80211_tx_info *info,
+ struct ieee80211_sta *sta,
+ __le16 fc)
+{
+ const u8 rts_retry_limit = 60;
+ u32 rate_flags;
+ int rate_idx;
+ u8 data_retry_limit;
+ u8 rate_plcp;
+
+ /* Set retry limit on DATA packets and Probe Responses */
+ if (ieee80211_is_probe_resp(fc))
+ data_retry_limit = 3;
+ else
+ data_retry_limit = IL4965_DEFAULT_TX_RETRY;
+ tx_cmd->data_retry_limit = data_retry_limit;
+ /* Set retry limit on RTS packets */
+ tx_cmd->rts_retry_limit = min(data_retry_limit, rts_retry_limit);
+
+ /* DATA packets will use the uCode station table for rate/antenna
+ * selection */
+ if (ieee80211_is_data(fc)) {
+ tx_cmd->initial_rate_idx = 0;
+ tx_cmd->tx_flags |= TX_CMD_FLG_STA_RATE_MSK;
+ return;
+ }
+
+ /**
+ * If the current TX rate stored in mac80211 has the MCS bit set, it's
+ * not really a TX rate. Thus, we use the lowest supported rate for
+ * this band. Also use the lowest supported rate if the stored rate
+ * idx is invalid.
+ */
+ rate_idx = info->control.rates[0].idx;
+ if ((info->control.rates[0].flags & IEEE80211_TX_RC_MCS) || rate_idx < 0
+ || rate_idx > RATE_COUNT_LEGACY)
+ rate_idx = rate_lowest_index(&il->bands[info->band], sta);
+ /* For 5 GHZ band, remap mac80211 rate indices into driver indices */
+ if (info->band == IEEE80211_BAND_5GHZ)
+ rate_idx += IL_FIRST_OFDM_RATE;
+ /* Get PLCP rate for tx_cmd->rate_n_flags */
+ rate_plcp = il_rates[rate_idx].plcp;
+ /* Zero out flags for this packet */
+ rate_flags = 0;
+
+ /* Set CCK flag as needed */
+ if (rate_idx >= IL_FIRST_CCK_RATE && rate_idx <= IL_LAST_CCK_RATE)
+ rate_flags |= RATE_MCS_CCK_MSK;
+
+ /* Set up antennas */
+ il4965_toggle_tx_ant(il, &il->mgmt_tx_ant, il->hw_params.valid_tx_ant);
+ rate_flags |= BIT(il->mgmt_tx_ant) << RATE_MCS_ANT_POS;
+
+ /* Set the rate in the TX cmd */
+ tx_cmd->rate_n_flags = cpu_to_le32(rate_plcp | rate_flags);
+}
+
+static void
+il4965_tx_cmd_build_hwcrypto(struct il_priv *il, struct ieee80211_tx_info *info,
+ struct il_tx_cmd *tx_cmd, struct sk_buff *skb_frag,
+ int sta_id)
+{
+ struct ieee80211_key_conf *keyconf = info->control.hw_key;
+
+ switch (keyconf->cipher) {
+ case WLAN_CIPHER_SUITE_CCMP:
+ tx_cmd->sec_ctl = TX_CMD_SEC_CCM;
+ memcpy(tx_cmd->key, keyconf->key, keyconf->keylen);
+ if (info->flags & IEEE80211_TX_CTL_AMPDU)
+ tx_cmd->tx_flags |= TX_CMD_FLG_AGG_CCMP_MSK;
+ D_TX("tx_cmd with AES hwcrypto\n");
+ break;
+
+ case WLAN_CIPHER_SUITE_TKIP:
+ tx_cmd->sec_ctl = TX_CMD_SEC_TKIP;
+ ieee80211_get_tkip_p2k(keyconf, skb_frag, tx_cmd->key);
+ D_TX("tx_cmd with tkip hwcrypto\n");
+ break;
+
+ case WLAN_CIPHER_SUITE_WEP104:
+ tx_cmd->sec_ctl |= TX_CMD_SEC_KEY128;
+ /* fall through */
+ case WLAN_CIPHER_SUITE_WEP40:
+ tx_cmd->sec_ctl |=
+ (TX_CMD_SEC_WEP | (keyconf->keyidx & TX_CMD_SEC_MSK) <<
+ TX_CMD_SEC_SHIFT);
+
+ memcpy(&tx_cmd->key[3], keyconf->key, keyconf->keylen);
+
+ D_TX("Configuring packet for WEP encryption " "with key %d\n",
+ keyconf->keyidx);
+ break;
+
+ default:
+ IL_ERR("Unknown encode cipher %x\n", keyconf->cipher);
+ break;
+ }
+}
+
+/*
+ * start C_TX command process
+ */
+int
+il4965_tx_skb(struct il_priv *il,
+ struct ieee80211_sta *sta,
+ struct sk_buff *skb)
+{
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ struct il_station_priv *sta_priv = NULL;
+ struct il_tx_queue *txq;
+ struct il_queue *q;
+ struct il_device_cmd *out_cmd;
+ struct il_cmd_meta *out_meta;
+ struct il_tx_cmd *tx_cmd;
+ int txq_id;
+ dma_addr_t phys_addr;
+ dma_addr_t txcmd_phys;
+ dma_addr_t scratch_phys;
+ u16 len, firstlen, secondlen;
+ u16 seq_number = 0;
+ __le16 fc;
+ u8 hdr_len;
+ u8 sta_id;
+ u8 wait_write_ptr = 0;
+ u8 tid = 0;
+ u8 *qc = NULL;
+ unsigned long flags;
+ bool is_agg = false;
+
+ spin_lock_irqsave(&il->lock, flags);
+ if (il_is_rfkill(il)) {
+ D_DROP("Dropping - RF KILL\n");
+ goto drop_unlock;
+ }
+
+ fc = hdr->frame_control;
+
+#ifdef CONFIG_IWLEGACY_DEBUG
+ if (ieee80211_is_auth(fc))
+ D_TX("Sending AUTH frame\n");
+ else if (ieee80211_is_assoc_req(fc))
+ D_TX("Sending ASSOC frame\n");
+ else if (ieee80211_is_reassoc_req(fc))
+ D_TX("Sending REASSOC frame\n");
+#endif
+
+ hdr_len = ieee80211_hdrlen(fc);
+
+ /* For management frames use broadcast id to do not break aggregation */
+ if (!ieee80211_is_data(fc))
+ sta_id = il->hw_params.bcast_id;
+ else {
+ /* Find idx into station table for destination station */
+ sta_id = il_sta_id_or_broadcast(il, sta);
+
+ if (sta_id == IL_INVALID_STATION) {
+ D_DROP("Dropping - INVALID STATION: %pM\n", hdr->addr1);
+ goto drop_unlock;
+ }
+ }
+
+ D_TX("station Id %d\n", sta_id);
+
+ if (sta)
+ sta_priv = (void *)sta->drv_priv;
+
+ if (sta_priv && sta_priv->asleep &&
+ (info->flags & IEEE80211_TX_CTL_NO_PS_BUFFER)) {
+ /*
+ * This sends an asynchronous command to the device,
+ * but we can rely on it being processed before the
+ * next frame is processed -- and the next frame to
+ * this station is the one that will consume this
+ * counter.
+ * For now set the counter to just 1 since we do not
+ * support uAPSD yet.
+ */
+ il4965_sta_modify_sleep_tx_count(il, sta_id, 1);
+ }
+
+ /* FIXME: remove me ? */
+ WARN_ON_ONCE(info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM);
+
+ /* Access category (AC) is also the queue number */
+ txq_id = skb_get_queue_mapping(skb);
+
+ /* irqs already disabled/saved above when locking il->lock */
+ spin_lock(&il->sta_lock);
+
+ if (ieee80211_is_data_qos(fc)) {
+ qc = ieee80211_get_qos_ctl(hdr);
+ tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
+ if (WARN_ON_ONCE(tid >= MAX_TID_COUNT)) {
+ spin_unlock(&il->sta_lock);
+ goto drop_unlock;
+ }
+ seq_number = il->stations[sta_id].tid[tid].seq_number;
+ seq_number &= IEEE80211_SCTL_SEQ;
+ hdr->seq_ctrl =
+ hdr->seq_ctrl & cpu_to_le16(IEEE80211_SCTL_FRAG);
+ hdr->seq_ctrl |= cpu_to_le16(seq_number);
+ seq_number += 0x10;
+ /* aggregation is on for this <sta,tid> */
+ if (info->flags & IEEE80211_TX_CTL_AMPDU &&
+ il->stations[sta_id].tid[tid].agg.state == IL_AGG_ON) {
+ txq_id = il->stations[sta_id].tid[tid].agg.txq_id;
+ is_agg = true;
+ }
+ }
+
+ txq = &il->txq[txq_id];
+ q = &txq->q;
+
+ if (unlikely(il_queue_space(q) < q->high_mark)) {
+ spin_unlock(&il->sta_lock);
+ goto drop_unlock;
+ }
+
+ if (ieee80211_is_data_qos(fc)) {
+ il->stations[sta_id].tid[tid].tfds_in_queue++;
+ if (!ieee80211_has_morefrags(fc))
+ il->stations[sta_id].tid[tid].seq_number = seq_number;
+ }
+
+ spin_unlock(&il->sta_lock);
+
+ txq->skbs[q->write_ptr] = skb;
+
+ /* Set up first empty entry in queue's array of Tx/cmd buffers */
+ out_cmd = txq->cmd[q->write_ptr];
+ out_meta = &txq->meta[q->write_ptr];
+ tx_cmd = &out_cmd->cmd.tx;
+ memset(&out_cmd->hdr, 0, sizeof(out_cmd->hdr));
+ memset(tx_cmd, 0, sizeof(struct il_tx_cmd));
+
+ /*
+ * Set up the Tx-command (not MAC!) header.
+ * Store the chosen Tx queue and TFD idx within the sequence field;
+ * after Tx, uCode's Tx response will return this value so driver can
+ * locate the frame within the tx queue and do post-tx processing.
+ */
+ out_cmd->hdr.cmd = C_TX;
+ out_cmd->hdr.sequence =
+ cpu_to_le16((u16)
+ (QUEUE_TO_SEQ(txq_id) | IDX_TO_SEQ(q->write_ptr)));
+
+ /* Copy MAC header from skb into command buffer */
+ memcpy(tx_cmd->hdr, hdr, hdr_len);
+
+ /* Total # bytes to be transmitted */
+ tx_cmd->len = cpu_to_le16((u16) skb->len);
+
+ if (info->control.hw_key)
+ il4965_tx_cmd_build_hwcrypto(il, info, tx_cmd, skb, sta_id);
+
+ /* TODO need this for burst mode later on */
+ il4965_tx_cmd_build_basic(il, skb, tx_cmd, info, hdr, sta_id);
+
+ il4965_tx_cmd_build_rate(il, tx_cmd, info, sta, fc);
+
+ /*
+ * Use the first empty entry in this queue's command buffer array
+ * to contain the Tx command and MAC header concatenated together
+ * (payload data will be in another buffer).
+ * Size of this varies, due to varying MAC header length.
+ * If end is not dword aligned, we'll have 2 extra bytes at the end
+ * of the MAC header (device reads on dword boundaries).
+ * We'll tell device about this padding later.
+ */
+ len = sizeof(struct il_tx_cmd) + sizeof(struct il_cmd_header) + hdr_len;
+ firstlen = (len + 3) & ~3;
+
+ /* Tell NIC about any 2-byte padding after MAC header */
+ if (firstlen != len)
+ tx_cmd->tx_flags |= TX_CMD_FLG_MH_PAD_MSK;
+
+ /* Physical address of this Tx command's header (not MAC header!),
+ * within command buffer array. */
+ txcmd_phys =
+ pci_map_single(il->pci_dev, &out_cmd->hdr, firstlen,
+ PCI_DMA_BIDIRECTIONAL);
+ if (unlikely(pci_dma_mapping_error(il->pci_dev, txcmd_phys)))
+ goto drop_unlock;
+
+ /* Set up TFD's 2nd entry to point directly to remainder of skb,
+ * if any (802.11 null frames have no payload). */
+ secondlen = skb->len - hdr_len;
+ if (secondlen > 0) {
+ phys_addr =
+ pci_map_single(il->pci_dev, skb->data + hdr_len, secondlen,
+ PCI_DMA_TODEVICE);
+ if (unlikely(pci_dma_mapping_error(il->pci_dev, phys_addr)))
+ goto drop_unlock;
+ }
+
+ /* Add buffer containing Tx command and MAC(!) header to TFD's
+ * first entry */
+ il->ops->txq_attach_buf_to_tfd(il, txq, txcmd_phys, firstlen, 1, 0);
+ dma_unmap_addr_set(out_meta, mapping, txcmd_phys);
+ dma_unmap_len_set(out_meta, len, firstlen);
+ if (secondlen)
+ il->ops->txq_attach_buf_to_tfd(il, txq, phys_addr, secondlen,
+ 0, 0);
+
+ if (!ieee80211_has_morefrags(hdr->frame_control)) {
+ txq->need_update = 1;
+ } else {
+ wait_write_ptr = 1;
+ txq->need_update = 0;
+ }
+
+ scratch_phys =
+ txcmd_phys + sizeof(struct il_cmd_header) +
+ offsetof(struct il_tx_cmd, scratch);
+
+ /* take back ownership of DMA buffer to enable update */
+ pci_dma_sync_single_for_cpu(il->pci_dev, txcmd_phys, firstlen,
+ PCI_DMA_BIDIRECTIONAL);
+ tx_cmd->dram_lsb_ptr = cpu_to_le32(scratch_phys);
+ tx_cmd->dram_msb_ptr = il_get_dma_hi_addr(scratch_phys);
+
+ il_update_stats(il, true, fc, skb->len);
+
+ D_TX("sequence nr = 0X%x\n", le16_to_cpu(out_cmd->hdr.sequence));
+ D_TX("tx_flags = 0X%x\n", le32_to_cpu(tx_cmd->tx_flags));
+ il_print_hex_dump(il, IL_DL_TX, (u8 *) tx_cmd, sizeof(*tx_cmd));
+ il_print_hex_dump(il, IL_DL_TX, (u8 *) tx_cmd->hdr, hdr_len);
+
+ /* Set up entry for this TFD in Tx byte-count array */
+ if (info->flags & IEEE80211_TX_CTL_AMPDU)
+ il->ops->txq_update_byte_cnt_tbl(il, txq, le16_to_cpu(tx_cmd->len));
+
+ pci_dma_sync_single_for_device(il->pci_dev, txcmd_phys, firstlen,
+ PCI_DMA_BIDIRECTIONAL);
+
+ /* Tell device the write idx *just past* this latest filled TFD */
+ q->write_ptr = il_queue_inc_wrap(q->write_ptr, q->n_bd);
+ il_txq_update_write_ptr(il, txq);
+ spin_unlock_irqrestore(&il->lock, flags);
+
+ /*
+ * At this point the frame is "transmitted" successfully
+ * and we will get a TX status notification eventually,
+ * regardless of the value of ret. "ret" only indicates
+ * whether or not we should update the write pointer.
+ */
+
+ /*
+ * Avoid atomic ops if it isn't an associated client.
+ * Also, if this is a packet for aggregation, don't
+ * increase the counter because the ucode will stop
+ * aggregation queues when their respective station
+ * goes to sleep.
+ */
+ if (sta_priv && sta_priv->client && !is_agg)
+ atomic_inc(&sta_priv->pending_frames);
+
+ if (il_queue_space(q) < q->high_mark && il->mac80211_registered) {
+ if (wait_write_ptr) {
+ spin_lock_irqsave(&il->lock, flags);
+ txq->need_update = 1;
+ il_txq_update_write_ptr(il, txq);
+ spin_unlock_irqrestore(&il->lock, flags);
+ } else {
+ il_stop_queue(il, txq);
+ }
+ }
+
+ return 0;
+
+drop_unlock:
+ spin_unlock_irqrestore(&il->lock, flags);
+ return -1;
+}
+
+static inline int
+il4965_alloc_dma_ptr(struct il_priv *il, struct il_dma_ptr *ptr, size_t size)
+{
+ ptr->addr = dma_alloc_coherent(&il->pci_dev->dev, size, &ptr->dma,
+ GFP_KERNEL);
+ if (!ptr->addr)
+ return -ENOMEM;
+ ptr->size = size;
+ return 0;
+}
+
+static inline void
+il4965_free_dma_ptr(struct il_priv *il, struct il_dma_ptr *ptr)
+{
+ if (unlikely(!ptr->addr))
+ return;
+
+ dma_free_coherent(&il->pci_dev->dev, ptr->size, ptr->addr, ptr->dma);
+ memset(ptr, 0, sizeof(*ptr));
+}
+
+/**
+ * il4965_hw_txq_ctx_free - Free TXQ Context
+ *
+ * Destroy all TX DMA queues and structures
+ */
+void
+il4965_hw_txq_ctx_free(struct il_priv *il)
+{
+ int txq_id;
+
+ /* Tx queues */
+ if (il->txq) {
+ for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++)
+ if (txq_id == il->cmd_queue)
+ il_cmd_queue_free(il);
+ else
+ il_tx_queue_free(il, txq_id);
+ }
+ il4965_free_dma_ptr(il, &il->kw);
+
+ il4965_free_dma_ptr(il, &il->scd_bc_tbls);
+
+ /* free tx queue structure */
+ il_free_txq_mem(il);
+}
+
+/**
+ * il4965_txq_ctx_alloc - allocate TX queue context
+ * Allocate all Tx DMA structures and initialize them
+ *
+ * @param il
+ * @return error code
+ */
+int
+il4965_txq_ctx_alloc(struct il_priv *il)
+{
+ int ret, txq_id;
+ unsigned long flags;
+
+ /* Free all tx/cmd queues and keep-warm buffer */
+ il4965_hw_txq_ctx_free(il);
+
+ ret =
+ il4965_alloc_dma_ptr(il, &il->scd_bc_tbls,
+ il->hw_params.scd_bc_tbls_size);
+ if (ret) {
+ IL_ERR("Scheduler BC Table allocation failed\n");
+ goto error_bc_tbls;
+ }
+ /* Alloc keep-warm buffer */
+ ret = il4965_alloc_dma_ptr(il, &il->kw, IL_KW_SIZE);
+ if (ret) {
+ IL_ERR("Keep Warm allocation failed\n");
+ goto error_kw;
+ }
+
+ /* allocate tx queue structure */
+ ret = il_alloc_txq_mem(il);
+ if (ret)
+ goto error;
+
+ spin_lock_irqsave(&il->lock, flags);
+
+ /* Turn off all Tx DMA fifos */
+ il4965_txq_set_sched(il, 0);
+
+ /* Tell NIC where to find the "keep warm" buffer */
+ il_wr(il, FH49_KW_MEM_ADDR_REG, il->kw.dma >> 4);
+
+ spin_unlock_irqrestore(&il->lock, flags);
+
+ /* Alloc and init all Tx queues, including the command queue (#4/#9) */
+ for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++) {
+ ret = il_tx_queue_init(il, txq_id);
+ if (ret) {
+ IL_ERR("Tx %d queue init failed\n", txq_id);
+ goto error;
+ }
+ }
+
+ return ret;
+
+error:
+ il4965_hw_txq_ctx_free(il);
+ il4965_free_dma_ptr(il, &il->kw);
+error_kw:
+ il4965_free_dma_ptr(il, &il->scd_bc_tbls);
+error_bc_tbls:
+ return ret;
+}
+
+void
+il4965_txq_ctx_reset(struct il_priv *il)
+{
+ int txq_id;
+ unsigned long flags;
+
+ spin_lock_irqsave(&il->lock, flags);
+
+ /* Turn off all Tx DMA fifos */
+ il4965_txq_set_sched(il, 0);
+ /* Tell NIC where to find the "keep warm" buffer */
+ il_wr(il, FH49_KW_MEM_ADDR_REG, il->kw.dma >> 4);
+
+ spin_unlock_irqrestore(&il->lock, flags);
+
+ /* Alloc and init all Tx queues, including the command queue (#4) */
+ for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++)
+ il_tx_queue_reset(il, txq_id);
+}
+
+static void
+il4965_txq_ctx_unmap(struct il_priv *il)
+{
+ int txq_id;
+
+ if (!il->txq)
+ return;
+
+ /* Unmap DMA from host system and free skb's */
+ for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++)
+ if (txq_id == il->cmd_queue)
+ il_cmd_queue_unmap(il);
+ else
+ il_tx_queue_unmap(il, txq_id);
+}
+
+/**
+ * il4965_txq_ctx_stop - Stop all Tx DMA channels
+ */
+void
+il4965_txq_ctx_stop(struct il_priv *il)
+{
+ int ch, ret;
+
+ _il_wr_prph(il, IL49_SCD_TXFACT, 0);
+
+ /* Stop each Tx DMA channel, and wait for it to be idle */
+ for (ch = 0; ch < il->hw_params.dma_chnl_num; ch++) {
+ _il_wr(il, FH49_TCSR_CHNL_TX_CONFIG_REG(ch), 0x0);
+ ret =
+ _il_poll_bit(il, FH49_TSSR_TX_STATUS_REG,
+ FH49_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(ch),
+ FH49_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(ch),
+ 1000);
+ if (ret < 0)
+ IL_ERR("Timeout stopping DMA channel %d [0x%08x]",
+ ch, _il_rd(il, FH49_TSSR_TX_STATUS_REG));
+ }
+}
+
+/*
+ * Find first available (lowest unused) Tx Queue, mark it "active".
+ * Called only when finding queue for aggregation.
+ * Should never return anything < 7, because they should already
+ * be in use as EDCA AC (0-3), Command (4), reserved (5, 6)
+ */
+static int
+il4965_txq_ctx_activate_free(struct il_priv *il)
+{
+ int txq_id;
+
+ for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++)
+ if (!test_and_set_bit(txq_id, &il->txq_ctx_active_msk))
+ return txq_id;
+ return -1;
+}
+
+/**
+ * il4965_tx_queue_stop_scheduler - Stop queue, but keep configuration
+ */
+static void
+il4965_tx_queue_stop_scheduler(struct il_priv *il, u16 txq_id)
+{
+ /* Simply stop the queue, but don't change any configuration;
+ * the SCD_ACT_EN bit is the write-enable mask for the ACTIVE bit. */
+ il_wr_prph(il, IL49_SCD_QUEUE_STATUS_BITS(txq_id),
+ (0 << IL49_SCD_QUEUE_STTS_REG_POS_ACTIVE) |
+ (1 << IL49_SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN));
+}
+
+/**
+ * il4965_tx_queue_set_q2ratid - Map unique receiver/tid combination to a queue
+ */
+static int
+il4965_tx_queue_set_q2ratid(struct il_priv *il, u16 ra_tid, u16 txq_id)
+{
+ u32 tbl_dw_addr;
+ u32 tbl_dw;
+ u16 scd_q2ratid;
+
+ scd_q2ratid = ra_tid & IL_SCD_QUEUE_RA_TID_MAP_RATID_MSK;
+
+ tbl_dw_addr =
+ il->scd_base_addr + IL49_SCD_TRANSLATE_TBL_OFFSET_QUEUE(txq_id);
+
+ tbl_dw = il_read_targ_mem(il, tbl_dw_addr);
+
+ if (txq_id & 0x1)
+ tbl_dw = (scd_q2ratid << 16) | (tbl_dw & 0x0000FFFF);
+ else
+ tbl_dw = scd_q2ratid | (tbl_dw & 0xFFFF0000);
+
+ il_write_targ_mem(il, tbl_dw_addr, tbl_dw);
+
+ return 0;
+}
+
+/**
+ * il4965_tx_queue_agg_enable - Set up & enable aggregation for selected queue
+ *
+ * NOTE: txq_id must be greater than IL49_FIRST_AMPDU_QUEUE,
+ * i.e. it must be one of the higher queues used for aggregation
+ */
+static int
+il4965_txq_agg_enable(struct il_priv *il, int txq_id, int tx_fifo, int sta_id,
+ int tid, u16 ssn_idx)
+{
+ unsigned long flags;
+ u16 ra_tid;
+ int ret;
+
+ if ((IL49_FIRST_AMPDU_QUEUE > txq_id) ||
+ (IL49_FIRST_AMPDU_QUEUE +
+ il->cfg->num_of_ampdu_queues <= txq_id)) {
+ IL_WARN("queue number out of range: %d, must be %d to %d\n",
+ txq_id, IL49_FIRST_AMPDU_QUEUE,
+ IL49_FIRST_AMPDU_QUEUE +
+ il->cfg->num_of_ampdu_queues - 1);
+ return -EINVAL;
+ }
+
+ ra_tid = BUILD_RAxTID(sta_id, tid);
+
+ /* Modify device's station table to Tx this TID */
+ ret = il4965_sta_tx_modify_enable_tid(il, sta_id, tid);
+ if (ret)
+ return ret;
+
+ spin_lock_irqsave(&il->lock, flags);
+
+ /* Stop this Tx queue before configuring it */
+ il4965_tx_queue_stop_scheduler(il, txq_id);
+
+ /* Map receiver-address / traffic-ID to this queue */
+ il4965_tx_queue_set_q2ratid(il, ra_tid, txq_id);
+
+ /* Set this queue as a chain-building queue */
+ il_set_bits_prph(il, IL49_SCD_QUEUECHAIN_SEL, (1 << txq_id));
+
+ /* Place first TFD at idx corresponding to start sequence number.
+ * Assumes that ssn_idx is valid (!= 0xFFF) */
+ il->txq[txq_id].q.read_ptr = (ssn_idx & 0xff);
+ il->txq[txq_id].q.write_ptr = (ssn_idx & 0xff);
+ il4965_set_wr_ptrs(il, txq_id, ssn_idx);
+
+ /* Set up Tx win size and frame limit for this queue */
+ il_write_targ_mem(il,
+ il->scd_base_addr +
+ IL49_SCD_CONTEXT_QUEUE_OFFSET(txq_id),
+ (SCD_WIN_SIZE << IL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS)
+ & IL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK);
+
+ il_write_targ_mem(il,
+ il->scd_base_addr +
+ IL49_SCD_CONTEXT_QUEUE_OFFSET(txq_id) + sizeof(u32),
+ (SCD_FRAME_LIMIT <<
+ IL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) &
+ IL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK);
+
+ il_set_bits_prph(il, IL49_SCD_INTERRUPT_MASK, (1 << txq_id));
+
+ /* Set up Status area in SRAM, map to Tx DMA/FIFO, activate the queue */
+ il4965_tx_queue_set_status(il, &il->txq[txq_id], tx_fifo, 1);
+
+ spin_unlock_irqrestore(&il->lock, flags);
+
+ return 0;
+}
+
+int
+il4965_tx_agg_start(struct il_priv *il, struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta, u16 tid, u16 * ssn)
+{
+ int sta_id;
+ int tx_fifo;
+ int txq_id;
+ int ret;
+ unsigned long flags;
+ struct il_tid_data *tid_data;
+
+ /* FIXME: warning if tx fifo not found ? */
+ tx_fifo = il4965_get_fifo_from_tid(tid);
+ if (unlikely(tx_fifo < 0))
+ return tx_fifo;
+
+ D_HT("%s on ra = %pM tid = %d\n", __func__, sta->addr, tid);
+
+ sta_id = il_sta_id(sta);
+ if (sta_id == IL_INVALID_STATION) {
+ IL_ERR("Start AGG on invalid station\n");
+ return -ENXIO;
+ }
+ if (unlikely(tid >= MAX_TID_COUNT))
+ return -EINVAL;
+
+ if (il->stations[sta_id].tid[tid].agg.state != IL_AGG_OFF) {
+ IL_ERR("Start AGG when state is not IL_AGG_OFF !\n");
+ return -ENXIO;
+ }
+
+ txq_id = il4965_txq_ctx_activate_free(il);
+ if (txq_id == -1) {
+ IL_ERR("No free aggregation queue available\n");
+ return -ENXIO;
+ }
+
+ spin_lock_irqsave(&il->sta_lock, flags);
+ tid_data = &il->stations[sta_id].tid[tid];
+ *ssn = IEEE80211_SEQ_TO_SN(tid_data->seq_number);
+ tid_data->agg.txq_id = txq_id;
+ il_set_swq_id(&il->txq[txq_id], il4965_get_ac_from_tid(tid), txq_id);
+ spin_unlock_irqrestore(&il->sta_lock, flags);
+
+ ret = il4965_txq_agg_enable(il, txq_id, tx_fifo, sta_id, tid, *ssn);
+ if (ret)
+ return ret;
+
+ spin_lock_irqsave(&il->sta_lock, flags);
+ tid_data = &il->stations[sta_id].tid[tid];
+ if (tid_data->tfds_in_queue == 0) {
+ D_HT("HW queue is empty\n");
+ tid_data->agg.state = IL_AGG_ON;
+ ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid);
+ } else {
+ D_HT("HW queue is NOT empty: %d packets in HW queue\n",
+ tid_data->tfds_in_queue);
+ tid_data->agg.state = IL_EMPTYING_HW_QUEUE_ADDBA;
+ }
+ spin_unlock_irqrestore(&il->sta_lock, flags);
+ return ret;
+}
+
+/**
+ * txq_id must be greater than IL49_FIRST_AMPDU_QUEUE
+ * il->lock must be held by the caller
+ */
+static int
+il4965_txq_agg_disable(struct il_priv *il, u16 txq_id, u16 ssn_idx, u8 tx_fifo)
+{
+ if ((IL49_FIRST_AMPDU_QUEUE > txq_id) ||
+ (IL49_FIRST_AMPDU_QUEUE +
+ il->cfg->num_of_ampdu_queues <= txq_id)) {
+ IL_WARN("queue number out of range: %d, must be %d to %d\n",
+ txq_id, IL49_FIRST_AMPDU_QUEUE,
+ IL49_FIRST_AMPDU_QUEUE +
+ il->cfg->num_of_ampdu_queues - 1);
+ return -EINVAL;
+ }
+
+ il4965_tx_queue_stop_scheduler(il, txq_id);
+
+ il_clear_bits_prph(il, IL49_SCD_QUEUECHAIN_SEL, (1 << txq_id));
+
+ il->txq[txq_id].q.read_ptr = (ssn_idx & 0xff);
+ il->txq[txq_id].q.write_ptr = (ssn_idx & 0xff);
+ /* supposes that ssn_idx is valid (!= 0xFFF) */
+ il4965_set_wr_ptrs(il, txq_id, ssn_idx);
+
+ il_clear_bits_prph(il, IL49_SCD_INTERRUPT_MASK, (1 << txq_id));
+ il_txq_ctx_deactivate(il, txq_id);
+ il4965_tx_queue_set_status(il, &il->txq[txq_id], tx_fifo, 0);
+
+ return 0;
+}
+
+int
+il4965_tx_agg_stop(struct il_priv *il, struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta, u16 tid)
+{
+ int tx_fifo_id, txq_id, sta_id, ssn;
+ struct il_tid_data *tid_data;
+ int write_ptr, read_ptr;
+ unsigned long flags;
+
+ /* FIXME: warning if tx_fifo_id not found ? */
+ tx_fifo_id = il4965_get_fifo_from_tid(tid);
+ if (unlikely(tx_fifo_id < 0))
+ return tx_fifo_id;
+
+ sta_id = il_sta_id(sta);
+
+ if (sta_id == IL_INVALID_STATION) {
+ IL_ERR("Invalid station for AGG tid %d\n", tid);
+ return -ENXIO;
+ }
+
+ spin_lock_irqsave(&il->sta_lock, flags);
+
+ tid_data = &il->stations[sta_id].tid[tid];
+ ssn = (tid_data->seq_number & IEEE80211_SCTL_SEQ) >> 4;
+ txq_id = tid_data->agg.txq_id;
+
+ switch (il->stations[sta_id].tid[tid].agg.state) {
+ case IL_EMPTYING_HW_QUEUE_ADDBA:
+ /*
+ * This can happen if the peer stops aggregation
+ * again before we've had a chance to drain the
+ * queue we selected previously, i.e. before the
+ * session was really started completely.
+ */
+ D_HT("AGG stop before setup done\n");
+ goto turn_off;
+ case IL_AGG_ON:
+ break;
+ default:
+ IL_WARN("Stopping AGG while state not ON or starting\n");
+ }
+
+ write_ptr = il->txq[txq_id].q.write_ptr;
+ read_ptr = il->txq[txq_id].q.read_ptr;
+
+ /* The queue is not empty */
+ if (write_ptr != read_ptr) {
+ D_HT("Stopping a non empty AGG HW QUEUE\n");
+ il->stations[sta_id].tid[tid].agg.state =
+ IL_EMPTYING_HW_QUEUE_DELBA;
+ spin_unlock_irqrestore(&il->sta_lock, flags);
+ return 0;
+ }
+
+ D_HT("HW queue is empty\n");
+turn_off:
+ il->stations[sta_id].tid[tid].agg.state = IL_AGG_OFF;
+
+ /* do not restore/save irqs */
+ spin_unlock(&il->sta_lock);
+ spin_lock(&il->lock);
+
+ /*
+ * the only reason this call can fail is queue number out of range,
+ * which can happen if uCode is reloaded and all the station
+ * information are lost. if it is outside the range, there is no need
+ * to deactivate the uCode queue, just return "success" to allow
+ * mac80211 to clean up it own data.
+ */
+ il4965_txq_agg_disable(il, txq_id, ssn, tx_fifo_id);
+ spin_unlock_irqrestore(&il->lock, flags);
+
+ ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid);
+
+ return 0;
+}
+
+int
+il4965_txq_check_empty(struct il_priv *il, int sta_id, u8 tid, int txq_id)
+{
+ struct il_queue *q = &il->txq[txq_id].q;
+ u8 *addr = il->stations[sta_id].sta.sta.addr;
+ struct il_tid_data *tid_data = &il->stations[sta_id].tid[tid];
+
+ lockdep_assert_held(&il->sta_lock);
+
+ switch (il->stations[sta_id].tid[tid].agg.state) {
+ case IL_EMPTYING_HW_QUEUE_DELBA:
+ /* We are reclaiming the last packet of the */
+ /* aggregated HW queue */
+ if (txq_id == tid_data->agg.txq_id &&
+ q->read_ptr == q->write_ptr) {
+ u16 ssn = IEEE80211_SEQ_TO_SN(tid_data->seq_number);
+ int tx_fifo = il4965_get_fifo_from_tid(tid);
+ D_HT("HW queue empty: continue DELBA flow\n");
+ il4965_txq_agg_disable(il, txq_id, ssn, tx_fifo);
+ tid_data->agg.state = IL_AGG_OFF;
+ ieee80211_stop_tx_ba_cb_irqsafe(il->vif, addr, tid);
+ }
+ break;
+ case IL_EMPTYING_HW_QUEUE_ADDBA:
+ /* We are reclaiming the last packet of the queue */
+ if (tid_data->tfds_in_queue == 0) {
+ D_HT("HW queue empty: continue ADDBA flow\n");
+ tid_data->agg.state = IL_AGG_ON;
+ ieee80211_start_tx_ba_cb_irqsafe(il->vif, addr, tid);
+ }
+ break;
+ }
+
+ return 0;
+}
+
+static void
+il4965_non_agg_tx_status(struct il_priv *il, const u8 *addr1)
+{
+ struct ieee80211_sta *sta;
+ struct il_station_priv *sta_priv;
+
+ rcu_read_lock();
+ sta = ieee80211_find_sta(il->vif, addr1);
+ if (sta) {
+ sta_priv = (void *)sta->drv_priv;
+ /* avoid atomic ops if this isn't a client */
+ if (sta_priv->client &&
+ atomic_dec_return(&sta_priv->pending_frames) == 0)
+ ieee80211_sta_block_awake(il->hw, sta, false);
+ }
+ rcu_read_unlock();
+}
+
+static void
+il4965_tx_status(struct il_priv *il, struct sk_buff *skb, bool is_agg)
+{
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+
+ if (!is_agg)
+ il4965_non_agg_tx_status(il, hdr->addr1);
+
+ ieee80211_tx_status_irqsafe(il->hw, skb);
+}
+
+int
+il4965_tx_queue_reclaim(struct il_priv *il, int txq_id, int idx)
+{
+ struct il_tx_queue *txq = &il->txq[txq_id];
+ struct il_queue *q = &txq->q;
+ int nfreed = 0;
+ struct ieee80211_hdr *hdr;
+ struct sk_buff *skb;
+
+ if (idx >= q->n_bd || il_queue_used(q, idx) == 0) {
+ IL_ERR("Read idx for DMA queue txq id (%d), idx %d, "
+ "is out of range [0-%d] %d %d.\n", txq_id, idx, q->n_bd,
+ q->write_ptr, q->read_ptr);
+ return 0;
+ }
+
+ for (idx = il_queue_inc_wrap(idx, q->n_bd); q->read_ptr != idx;
+ q->read_ptr = il_queue_inc_wrap(q->read_ptr, q->n_bd)) {
+
+ skb = txq->skbs[txq->q.read_ptr];
+
+ if (WARN_ON_ONCE(skb == NULL))
+ continue;
+
+ hdr = (struct ieee80211_hdr *) skb->data;
+ if (ieee80211_is_data_qos(hdr->frame_control))
+ nfreed++;
+
+ il4965_tx_status(il, skb, txq_id >= IL4965_FIRST_AMPDU_QUEUE);
+
+ txq->skbs[txq->q.read_ptr] = NULL;
+ il->ops->txq_free_tfd(il, txq);
+ }
+ return nfreed;
+}
+
+/**
+ * il4965_tx_status_reply_compressed_ba - Update tx status from block-ack
+ *
+ * Go through block-ack's bitmap of ACK'd frames, update driver's record of
+ * ACK vs. not. This gets sent to mac80211, then to rate scaling algo.
+ */
+static int
+il4965_tx_status_reply_compressed_ba(struct il_priv *il, struct il_ht_agg *agg,
+ struct il_compressed_ba_resp *ba_resp)
+{
+ int i, sh, ack;
+ u16 seq_ctl = le16_to_cpu(ba_resp->seq_ctl);
+ u16 scd_flow = le16_to_cpu(ba_resp->scd_flow);
+ int successes = 0;
+ struct ieee80211_tx_info *info;
+ u64 bitmap, sent_bitmap;
+
+ if (unlikely(!agg->wait_for_ba)) {
+ if (unlikely(ba_resp->bitmap))
+ IL_ERR("Received BA when not expected\n");
+ return -EINVAL;
+ }
+
+ /* Mark that the expected block-ack response arrived */
+ agg->wait_for_ba = 0;
+ D_TX_REPLY("BA %d %d\n", agg->start_idx, ba_resp->seq_ctl);
+
+ /* Calculate shift to align block-ack bits with our Tx win bits */
+ sh = agg->start_idx - SEQ_TO_IDX(seq_ctl >> 4);
+ if (sh < 0) /* tbw something is wrong with indices */
+ sh += 0x100;
+
+ if (agg->frame_count > (64 - sh)) {
+ D_TX_REPLY("more frames than bitmap size");
+ return -1;
+ }
+
+ /* don't use 64-bit values for now */
+ bitmap = le64_to_cpu(ba_resp->bitmap) >> sh;
+
+ /* check for success or failure according to the
+ * transmitted bitmap and block-ack bitmap */
+ sent_bitmap = bitmap & agg->bitmap;
+
+ /* For each frame attempted in aggregation,
+ * update driver's record of tx frame's status. */
+ i = 0;
+ while (sent_bitmap) {
+ ack = sent_bitmap & 1ULL;
+ successes += ack;
+ D_TX_REPLY("%s ON i=%d idx=%d raw=%d\n", ack ? "ACK" : "NACK",
+ i, (agg->start_idx + i) & 0xff, agg->start_idx + i);
+ sent_bitmap >>= 1;
+ ++i;
+ }
+
+ D_TX_REPLY("Bitmap %llx\n", (unsigned long long)bitmap);
+
+ info = IEEE80211_SKB_CB(il->txq[scd_flow].skbs[agg->start_idx]);
+ memset(&info->status, 0, sizeof(info->status));
+ info->flags |= IEEE80211_TX_STAT_ACK;
+ info->flags |= IEEE80211_TX_STAT_AMPDU;
+ info->status.ampdu_ack_len = successes;
+ info->status.ampdu_len = agg->frame_count;
+ il4965_hwrate_to_tx_control(il, agg->rate_n_flags, info);
+
+ return 0;
+}
+
+static inline bool
+il4965_is_tx_success(u32 status)
+{
+ status &= TX_STATUS_MSK;
+ return (status == TX_STATUS_SUCCESS || status == TX_STATUS_DIRECT_DONE);
+}
+
+static u8
+il4965_find_station(struct il_priv *il, const u8 *addr)
+{
+ int i;
+ int start = 0;
+ int ret = IL_INVALID_STATION;
+ unsigned long flags;
+
+ if (il->iw_mode == NL80211_IFTYPE_ADHOC)
+ start = IL_STA_ID;
+
+ if (is_broadcast_ether_addr(addr))
+ return il->hw_params.bcast_id;
+
+ spin_lock_irqsave(&il->sta_lock, flags);
+ for (i = start; i < il->hw_params.max_stations; i++)
+ if (il->stations[i].used &&
+ ether_addr_equal(il->stations[i].sta.sta.addr, addr)) {
+ ret = i;
+ goto out;
+ }
+
+ D_ASSOC("can not find STA %pM total %d\n", addr, il->num_stations);
+
+out:
+ /*
+ * It may be possible that more commands interacting with stations
+ * arrive before we completed processing the adding of
+ * station
+ */
+ if (ret != IL_INVALID_STATION &&
+ (!(il->stations[ret].used & IL_STA_UCODE_ACTIVE) ||
+ ((il->stations[ret].used & IL_STA_UCODE_ACTIVE) &&
+ (il->stations[ret].used & IL_STA_UCODE_INPROGRESS)))) {
+ IL_ERR("Requested station info for sta %d before ready.\n",
+ ret);
+ ret = IL_INVALID_STATION;
+ }
+ spin_unlock_irqrestore(&il->sta_lock, flags);
+ return ret;
+}
+
+static int
+il4965_get_ra_sta_id(struct il_priv *il, struct ieee80211_hdr *hdr)
+{
+ if (il->iw_mode == NL80211_IFTYPE_STATION)
+ return IL_AP_ID;
+ else {
+ u8 *da = ieee80211_get_DA(hdr);
+
+ return il4965_find_station(il, da);
+ }
+}
+
+static inline u32
+il4965_get_scd_ssn(struct il4965_tx_resp *tx_resp)
+{
+ return le32_to_cpup(&tx_resp->u.status +
+ tx_resp->frame_count) & IEEE80211_MAX_SN;
+}
+
+static inline u32
+il4965_tx_status_to_mac80211(u32 status)
+{
+ status &= TX_STATUS_MSK;
+
+ switch (status) {
+ case TX_STATUS_SUCCESS:
+ case TX_STATUS_DIRECT_DONE:
+ return IEEE80211_TX_STAT_ACK;
+ case TX_STATUS_FAIL_DEST_PS:
+ return IEEE80211_TX_STAT_TX_FILTERED;
+ default:
+ return 0;
+ }
+}
+
+/**
+ * il4965_tx_status_reply_tx - Handle Tx response for frames in aggregation queue
+ */
+static int
+il4965_tx_status_reply_tx(struct il_priv *il, struct il_ht_agg *agg,
+ struct il4965_tx_resp *tx_resp, int txq_id,
+ u16 start_idx)
+{
+ u16 status;
+ struct agg_tx_status *frame_status = tx_resp->u.agg_status;
+ struct ieee80211_tx_info *info = NULL;
+ struct ieee80211_hdr *hdr = NULL;
+ u32 rate_n_flags = le32_to_cpu(tx_resp->rate_n_flags);
+ int i, sh, idx;
+ u16 seq;
+ if (agg->wait_for_ba)
+ D_TX_REPLY("got tx response w/o block-ack\n");
+
+ agg->frame_count = tx_resp->frame_count;
+ agg->start_idx = start_idx;
+ agg->rate_n_flags = rate_n_flags;
+ agg->bitmap = 0;
+
+ /* num frames attempted by Tx command */
+ if (agg->frame_count == 1) {
+ /* Only one frame was attempted; no block-ack will arrive */
+ status = le16_to_cpu(frame_status[0].status);
+ idx = start_idx;
+
+ D_TX_REPLY("FrameCnt = %d, StartIdx=%d idx=%d\n",
+ agg->frame_count, agg->start_idx, idx);
+
+ info = IEEE80211_SKB_CB(il->txq[txq_id].skbs[idx]);
+ info->status.rates[0].count = tx_resp->failure_frame + 1;
+ info->flags &= ~IEEE80211_TX_CTL_AMPDU;
+ info->flags |= il4965_tx_status_to_mac80211(status);
+ il4965_hwrate_to_tx_control(il, rate_n_flags, info);
+
+ D_TX_REPLY("1 Frame 0x%x failure :%d\n", status & 0xff,
+ tx_resp->failure_frame);
+ D_TX_REPLY("Rate Info rate_n_flags=%x\n", rate_n_flags);
+
+ agg->wait_for_ba = 0;
+ } else {
+ /* Two or more frames were attempted; expect block-ack */
+ u64 bitmap = 0;
+ int start = agg->start_idx;
+ struct sk_buff *skb;
+
+ /* Construct bit-map of pending frames within Tx win */
+ for (i = 0; i < agg->frame_count; i++) {
+ u16 sc;
+ status = le16_to_cpu(frame_status[i].status);
+ seq = le16_to_cpu(frame_status[i].sequence);
+ idx = SEQ_TO_IDX(seq);
+ txq_id = SEQ_TO_QUEUE(seq);
+
+ if (status &
+ (AGG_TX_STATE_FEW_BYTES_MSK |
+ AGG_TX_STATE_ABORT_MSK))
+ continue;
+
+ D_TX_REPLY("FrameCnt = %d, txq_id=%d idx=%d\n",
+ agg->frame_count, txq_id, idx);
+
+ skb = il->txq[txq_id].skbs[idx];
+ if (WARN_ON_ONCE(skb == NULL))
+ return -1;
+ hdr = (struct ieee80211_hdr *) skb->data;
+
+ sc = le16_to_cpu(hdr->seq_ctrl);
+ if (idx != (IEEE80211_SEQ_TO_SN(sc) & 0xff)) {
+ IL_ERR("BUG_ON idx doesn't match seq control"
+ " idx=%d, seq_idx=%d, seq=%d\n", idx,
+ IEEE80211_SEQ_TO_SN(sc), hdr->seq_ctrl);
+ return -1;
+ }
+
+ D_TX_REPLY("AGG Frame i=%d idx %d seq=%d\n", i, idx,
+ IEEE80211_SEQ_TO_SN(sc));
+
+ sh = idx - start;
+ if (sh > 64) {
+ sh = (start - idx) + 0xff;
+ bitmap = bitmap << sh;
+ sh = 0;
+ start = idx;
+ } else if (sh < -64)
+ sh = 0xff - (start - idx);
+ else if (sh < 0) {
+ sh = start - idx;
+ start = idx;
+ bitmap = bitmap << sh;
+ sh = 0;
+ }
+ bitmap |= 1ULL << sh;
+ D_TX_REPLY("start=%d bitmap=0x%llx\n", start,
+ (unsigned long long)bitmap);
+ }
+
+ agg->bitmap = bitmap;
+ agg->start_idx = start;
+ D_TX_REPLY("Frames %d start_idx=%d bitmap=0x%llx\n",
+ agg->frame_count, agg->start_idx,
+ (unsigned long long)agg->bitmap);
+
+ if (bitmap)
+ agg->wait_for_ba = 1;
+ }
+ return 0;
+}
+
+/**
+ * il4965_hdl_tx - Handle standard (non-aggregation) Tx response
+ */
+static void
+il4965_hdl_tx(struct il_priv *il, struct il_rx_buf *rxb)
+{
+ struct il_rx_pkt *pkt = rxb_addr(rxb);
+ u16 sequence = le16_to_cpu(pkt->hdr.sequence);
+ int txq_id = SEQ_TO_QUEUE(sequence);
+ int idx = SEQ_TO_IDX(sequence);
+ struct il_tx_queue *txq = &il->txq[txq_id];
+ struct sk_buff *skb;
+ struct ieee80211_hdr *hdr;
+ struct ieee80211_tx_info *info;
+ struct il4965_tx_resp *tx_resp = (void *)&pkt->u.raw[0];
+ u32 status = le32_to_cpu(tx_resp->u.status);
+ int uninitialized_var(tid);
+ int sta_id;
+ int freed;
+ u8 *qc = NULL;
+ unsigned long flags;
+
+ if (idx >= txq->q.n_bd || il_queue_used(&txq->q, idx) == 0) {
+ IL_ERR("Read idx for DMA queue txq_id (%d) idx %d "
+ "is out of range [0-%d] %d %d\n", txq_id, idx,
+ txq->q.n_bd, txq->q.write_ptr, txq->q.read_ptr);
+ return;
+ }
+
+ txq->time_stamp = jiffies;
+
+ skb = txq->skbs[txq->q.read_ptr];
+ info = IEEE80211_SKB_CB(skb);
+ memset(&info->status, 0, sizeof(info->status));
+
+ hdr = (struct ieee80211_hdr *) skb->data;
+ if (ieee80211_is_data_qos(hdr->frame_control)) {
+ qc = ieee80211_get_qos_ctl(hdr);
+ tid = qc[0] & 0xf;
+ }
+
+ sta_id = il4965_get_ra_sta_id(il, hdr);
+ if (txq->sched_retry && unlikely(sta_id == IL_INVALID_STATION)) {
+ IL_ERR("Station not known\n");
+ return;
+ }
+
+ /*
+ * Firmware will not transmit frame on passive channel, if it not yet
+ * received some valid frame on that channel. When this error happen
+ * we have to wait until firmware will unblock itself i.e. when we
+ * note received beacon or other frame. We unblock queues in
+ * il4965_pass_packet_to_mac80211 or in il_mac_bss_info_changed.
+ */
+ if (unlikely((status & TX_STATUS_MSK) == TX_STATUS_FAIL_PASSIVE_NO_RX) &&
+ il->iw_mode == NL80211_IFTYPE_STATION) {
+ il_stop_queues_by_reason(il, IL_STOP_REASON_PASSIVE);
+ D_INFO("Stopped queues - RX waiting on passive channel\n");
+ }
+
+ spin_lock_irqsave(&il->sta_lock, flags);
+ if (txq->sched_retry) {
+ const u32 scd_ssn = il4965_get_scd_ssn(tx_resp);
+ struct il_ht_agg *agg = NULL;
+ WARN_ON(!qc);
+
+ agg = &il->stations[sta_id].tid[tid].agg;
+
+ il4965_tx_status_reply_tx(il, agg, tx_resp, txq_id, idx);
+
+ /* check if BAR is needed */
+ if (tx_resp->frame_count == 1 &&
+ !il4965_is_tx_success(status))
+ info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK;
+
+ if (txq->q.read_ptr != (scd_ssn & 0xff)) {
+ idx = il_queue_dec_wrap(scd_ssn & 0xff, txq->q.n_bd);
+ D_TX_REPLY("Retry scheduler reclaim scd_ssn "
+ "%d idx %d\n", scd_ssn, idx);
+ freed = il4965_tx_queue_reclaim(il, txq_id, idx);
+ if (qc)
+ il4965_free_tfds_in_queue(il, sta_id, tid,
+ freed);
+
+ if (il->mac80211_registered &&
+ il_queue_space(&txq->q) > txq->q.low_mark &&
+ agg->state != IL_EMPTYING_HW_QUEUE_DELBA)
+ il_wake_queue(il, txq);
+ }
+ } else {
+ info->status.rates[0].count = tx_resp->failure_frame + 1;
+ info->flags |= il4965_tx_status_to_mac80211(status);
+ il4965_hwrate_to_tx_control(il,
+ le32_to_cpu(tx_resp->rate_n_flags),
+ info);
+
+ D_TX_REPLY("TXQ %d status %s (0x%08x) "
+ "rate_n_flags 0x%x retries %d\n", txq_id,
+ il4965_get_tx_fail_reason(status), status,
+ le32_to_cpu(tx_resp->rate_n_flags),
+ tx_resp->failure_frame);
+
+ freed = il4965_tx_queue_reclaim(il, txq_id, idx);
+ if (qc && likely(sta_id != IL_INVALID_STATION))
+ il4965_free_tfds_in_queue(il, sta_id, tid, freed);
+ else if (sta_id == IL_INVALID_STATION)
+ D_TX_REPLY("Station not known\n");
+
+ if (il->mac80211_registered &&
+ il_queue_space(&txq->q) > txq->q.low_mark)
+ il_wake_queue(il, txq);
+ }
+ if (qc && likely(sta_id != IL_INVALID_STATION))
+ il4965_txq_check_empty(il, sta_id, tid, txq_id);
+
+ il4965_check_abort_status(il, tx_resp->frame_count, status);
+
+ spin_unlock_irqrestore(&il->sta_lock, flags);
+}
+
+/**
+ * translate ucode response to mac80211 tx status control values
+ */
+void
+il4965_hwrate_to_tx_control(struct il_priv *il, u32 rate_n_flags,
+ struct ieee80211_tx_info *info)
+{
+ struct ieee80211_tx_rate *r = &info->status.rates[0];
+
+ info->status.antenna =
+ ((rate_n_flags & RATE_MCS_ANT_ABC_MSK) >> RATE_MCS_ANT_POS);
+ if (rate_n_flags & RATE_MCS_HT_MSK)
+ r->flags |= IEEE80211_TX_RC_MCS;
+ if (rate_n_flags & RATE_MCS_GF_MSK)
+ r->flags |= IEEE80211_TX_RC_GREEN_FIELD;
+ if (rate_n_flags & RATE_MCS_HT40_MSK)
+ r->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH;
+ if (rate_n_flags & RATE_MCS_DUP_MSK)
+ r->flags |= IEEE80211_TX_RC_DUP_DATA;
+ if (rate_n_flags & RATE_MCS_SGI_MSK)
+ r->flags |= IEEE80211_TX_RC_SHORT_GI;
+ r->idx = il4965_hwrate_to_mac80211_idx(rate_n_flags, info->band);
+}
+
+/**
+ * il4965_hdl_compressed_ba - Handler for N_COMPRESSED_BA
+ *
+ * Handles block-acknowledge notification from device, which reports success
+ * of frames sent via aggregation.
+ */
+static void
+il4965_hdl_compressed_ba(struct il_priv *il, struct il_rx_buf *rxb)
+{
+ struct il_rx_pkt *pkt = rxb_addr(rxb);
+ struct il_compressed_ba_resp *ba_resp = &pkt->u.compressed_ba;
+ struct il_tx_queue *txq = NULL;
+ struct il_ht_agg *agg;
+ int idx;
+ int sta_id;
+ int tid;
+ unsigned long flags;
+
+ /* "flow" corresponds to Tx queue */
+ u16 scd_flow = le16_to_cpu(ba_resp->scd_flow);
+
+ /* "ssn" is start of block-ack Tx win, corresponds to idx
+ * (in Tx queue's circular buffer) of first TFD/frame in win */
+ u16 ba_resp_scd_ssn = le16_to_cpu(ba_resp->scd_ssn);
+
+ if (scd_flow >= il->hw_params.max_txq_num) {
+ IL_ERR("BUG_ON scd_flow is bigger than number of queues\n");
+ return;
+ }
+
+ txq = &il->txq[scd_flow];
+ sta_id = ba_resp->sta_id;
+ tid = ba_resp->tid;
+ agg = &il->stations[sta_id].tid[tid].agg;
+ if (unlikely(agg->txq_id != scd_flow)) {
+ /*
+ * FIXME: this is a uCode bug which need to be addressed,
+ * log the information and return for now!
+ * since it is possible happen very often and in order
+ * not to fill the syslog, don't enable the logging by default
+ */
+ D_TX_REPLY("BA scd_flow %d does not match txq_id %d\n",
+ scd_flow, agg->txq_id);
+ return;
+ }
+
+ /* Find idx just before block-ack win */
+ idx = il_queue_dec_wrap(ba_resp_scd_ssn & 0xff, txq->q.n_bd);
+
+ spin_lock_irqsave(&il->sta_lock, flags);
+
+ D_TX_REPLY("N_COMPRESSED_BA [%d] Received from %pM, " "sta_id = %d\n",
+ agg->wait_for_ba, (u8 *) &ba_resp->sta_addr_lo32,
+ ba_resp->sta_id);
+ D_TX_REPLY("TID = %d, SeqCtl = %d, bitmap = 0x%llx," "scd_flow = "
+ "%d, scd_ssn = %d\n", ba_resp->tid, ba_resp->seq_ctl,
+ (unsigned long long)le64_to_cpu(ba_resp->bitmap),
+ ba_resp->scd_flow, ba_resp->scd_ssn);
+ D_TX_REPLY("DAT start_idx = %d, bitmap = 0x%llx\n", agg->start_idx,
+ (unsigned long long)agg->bitmap);
+
+ /* Update driver's record of ACK vs. not for each frame in win */
+ il4965_tx_status_reply_compressed_ba(il, agg, ba_resp);
+
+ /* Release all TFDs before the SSN, i.e. all TFDs in front of
+ * block-ack win (we assume that they've been successfully
+ * transmitted ... if not, it's too late anyway). */
+ if (txq->q.read_ptr != (ba_resp_scd_ssn & 0xff)) {
+ /* calculate mac80211 ampdu sw queue to wake */
+ int freed = il4965_tx_queue_reclaim(il, scd_flow, idx);
+ il4965_free_tfds_in_queue(il, sta_id, tid, freed);
+
+ if (il_queue_space(&txq->q) > txq->q.low_mark &&
+ il->mac80211_registered &&
+ agg->state != IL_EMPTYING_HW_QUEUE_DELBA)
+ il_wake_queue(il, txq);
+
+ il4965_txq_check_empty(il, sta_id, tid, scd_flow);
+ }
+
+ spin_unlock_irqrestore(&il->sta_lock, flags);
+}
+
+#ifdef CONFIG_IWLEGACY_DEBUG
+const char *
+il4965_get_tx_fail_reason(u32 status)
+{
+#define TX_STATUS_FAIL(x) case TX_STATUS_FAIL_ ## x: return #x
+#define TX_STATUS_POSTPONE(x) case TX_STATUS_POSTPONE_ ## x: return #x
+
+ switch (status & TX_STATUS_MSK) {
+ case TX_STATUS_SUCCESS:
+ return "SUCCESS";
+ TX_STATUS_POSTPONE(DELAY);
+ TX_STATUS_POSTPONE(FEW_BYTES);
+ TX_STATUS_POSTPONE(QUIET_PERIOD);
+ TX_STATUS_POSTPONE(CALC_TTAK);
+ TX_STATUS_FAIL(INTERNAL_CROSSED_RETRY);
+ TX_STATUS_FAIL(SHORT_LIMIT);
+ TX_STATUS_FAIL(LONG_LIMIT);
+ TX_STATUS_FAIL(FIFO_UNDERRUN);
+ TX_STATUS_FAIL(DRAIN_FLOW);
+ TX_STATUS_FAIL(RFKILL_FLUSH);
+ TX_STATUS_FAIL(LIFE_EXPIRE);
+ TX_STATUS_FAIL(DEST_PS);
+ TX_STATUS_FAIL(HOST_ABORTED);
+ TX_STATUS_FAIL(BT_RETRY);
+ TX_STATUS_FAIL(STA_INVALID);
+ TX_STATUS_FAIL(FRAG_DROPPED);
+ TX_STATUS_FAIL(TID_DISABLE);
+ TX_STATUS_FAIL(FIFO_FLUSHED);
+ TX_STATUS_FAIL(INSUFFICIENT_CF_POLL);
+ TX_STATUS_FAIL(PASSIVE_NO_RX);
+ TX_STATUS_FAIL(NO_BEACON_ON_RADAR);
+ }
+
+ return "UNKNOWN";
+
+#undef TX_STATUS_FAIL
+#undef TX_STATUS_POSTPONE
+}
+#endif /* CONFIG_IWLEGACY_DEBUG */
+
+static struct il_link_quality_cmd *
+il4965_sta_alloc_lq(struct il_priv *il, u8 sta_id)
+{
+ int i, r;
+ struct il_link_quality_cmd *link_cmd;
+ u32 rate_flags = 0;
+ __le32 rate_n_flags;
+
+ link_cmd = kzalloc(sizeof(struct il_link_quality_cmd), GFP_KERNEL);
+ if (!link_cmd) {
+ IL_ERR("Unable to allocate memory for LQ cmd.\n");
+ return NULL;
+ }
+ /* Set up the rate scaling to start at selected rate, fall back
+ * all the way down to 1M in IEEE order, and then spin on 1M */
+ if (il->band == IEEE80211_BAND_5GHZ)
+ r = RATE_6M_IDX;
+ else
+ r = RATE_1M_IDX;
+
+ if (r >= IL_FIRST_CCK_RATE && r <= IL_LAST_CCK_RATE)
+ rate_flags |= RATE_MCS_CCK_MSK;
+
+ rate_flags |=
+ il4965_first_antenna(il->hw_params.
+ valid_tx_ant) << RATE_MCS_ANT_POS;
+ rate_n_flags = cpu_to_le32(il_rates[r].plcp | rate_flags);
+ for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++)
+ link_cmd->rs_table[i].rate_n_flags = rate_n_flags;
+
+ link_cmd->general_params.single_stream_ant_msk =
+ il4965_first_antenna(il->hw_params.valid_tx_ant);
+
+ link_cmd->general_params.dual_stream_ant_msk =
+ il->hw_params.valid_tx_ant & ~il4965_first_antenna(il->hw_params.
+ valid_tx_ant);
+ if (!link_cmd->general_params.dual_stream_ant_msk) {
+ link_cmd->general_params.dual_stream_ant_msk = ANT_AB;
+ } else if (il4965_num_of_ant(il->hw_params.valid_tx_ant) == 2) {
+ link_cmd->general_params.dual_stream_ant_msk =
+ il->hw_params.valid_tx_ant;
+ }
+
+ link_cmd->agg_params.agg_dis_start_th = LINK_QUAL_AGG_DISABLE_START_DEF;
+ link_cmd->agg_params.agg_time_limit =
+ cpu_to_le16(LINK_QUAL_AGG_TIME_LIMIT_DEF);
+
+ link_cmd->sta_id = sta_id;
+
+ return link_cmd;
+}
+
+/*
+ * il4965_add_bssid_station - Add the special IBSS BSSID station
+ *
+ * Function sleeps.
+ */
+int
+il4965_add_bssid_station(struct il_priv *il, const u8 *addr, u8 *sta_id_r)
+{
+ int ret;
+ u8 sta_id;
+ struct il_link_quality_cmd *link_cmd;
+ unsigned long flags;
+
+ if (sta_id_r)
+ *sta_id_r = IL_INVALID_STATION;
+
+ ret = il_add_station_common(il, addr, 0, NULL, &sta_id);
+ if (ret) {
+ IL_ERR("Unable to add station %pM\n", addr);
+ return ret;
+ }
+
+ if (sta_id_r)
+ *sta_id_r = sta_id;
+
+ spin_lock_irqsave(&il->sta_lock, flags);
+ il->stations[sta_id].used |= IL_STA_LOCAL;
+ spin_unlock_irqrestore(&il->sta_lock, flags);
+
+ /* Set up default rate scaling table in device's station table */
+ link_cmd = il4965_sta_alloc_lq(il, sta_id);
+ if (!link_cmd) {
+ IL_ERR("Unable to initialize rate scaling for station %pM.\n",
+ addr);
+ return -ENOMEM;
+ }
+
+ ret = il_send_lq_cmd(il, link_cmd, CMD_SYNC, true);
+ if (ret)
+ IL_ERR("Link quality command failed (%d)\n", ret);
+
+ spin_lock_irqsave(&il->sta_lock, flags);
+ il->stations[sta_id].lq = link_cmd;
+ spin_unlock_irqrestore(&il->sta_lock, flags);
+
+ return 0;
+}
+
+static int
+il4965_static_wepkey_cmd(struct il_priv *il, bool send_if_empty)
+{
+ int i;
+ u8 buff[sizeof(struct il_wep_cmd) +
+ sizeof(struct il_wep_key) * WEP_KEYS_MAX];
+ struct il_wep_cmd *wep_cmd = (struct il_wep_cmd *)buff;
+ size_t cmd_size = sizeof(struct il_wep_cmd);
+ struct il_host_cmd cmd = {
+ .id = C_WEPKEY,
+ .data = wep_cmd,
+ .flags = CMD_SYNC,
+ };
+ bool not_empty = false;
+
+ might_sleep();
+
+ memset(wep_cmd, 0,
+ cmd_size + (sizeof(struct il_wep_key) * WEP_KEYS_MAX));
+
+ for (i = 0; i < WEP_KEYS_MAX; i++) {
+ u8 key_size = il->_4965.wep_keys[i].key_size;
+
+ wep_cmd->key[i].key_idx = i;
+ if (key_size) {
+ wep_cmd->key[i].key_offset = i;
+ not_empty = true;
+ } else
+ wep_cmd->key[i].key_offset = WEP_INVALID_OFFSET;
+
+ wep_cmd->key[i].key_size = key_size;
+ memcpy(&wep_cmd->key[i].key[3], il->_4965.wep_keys[i].key, key_size);
+ }
+
+ wep_cmd->global_key_type = WEP_KEY_WEP_TYPE;
+ wep_cmd->num_keys = WEP_KEYS_MAX;
+
+ cmd_size += sizeof(struct il_wep_key) * WEP_KEYS_MAX;
+ cmd.len = cmd_size;
+
+ if (not_empty || send_if_empty)
+ return il_send_cmd(il, &cmd);
+ else
+ return 0;
+}
+
+int
+il4965_restore_default_wep_keys(struct il_priv *il)
+{
+ lockdep_assert_held(&il->mutex);
+
+ return il4965_static_wepkey_cmd(il, false);
+}
+
+int
+il4965_remove_default_wep_key(struct il_priv *il,
+ struct ieee80211_key_conf *keyconf)
+{
+ int ret;
+ int idx = keyconf->keyidx;
+
+ lockdep_assert_held(&il->mutex);
+
+ D_WEP("Removing default WEP key: idx=%d\n", idx);
+
+ memset(&il->_4965.wep_keys[idx], 0, sizeof(struct il_wep_key));
+ if (il_is_rfkill(il)) {
+ D_WEP("Not sending C_WEPKEY command due to RFKILL.\n");
+ /* but keys in device are clear anyway so return success */
+ return 0;
+ }
+ ret = il4965_static_wepkey_cmd(il, 1);
+ D_WEP("Remove default WEP key: idx=%d ret=%d\n", idx, ret);
+
+ return ret;
+}
+
+int
+il4965_set_default_wep_key(struct il_priv *il,
+ struct ieee80211_key_conf *keyconf)
+{
+ int ret;
+ int len = keyconf->keylen;
+ int idx = keyconf->keyidx;
+
+ lockdep_assert_held(&il->mutex);
+
+ if (len != WEP_KEY_LEN_128 && len != WEP_KEY_LEN_64) {
+ D_WEP("Bad WEP key length %d\n", keyconf->keylen);
+ return -EINVAL;
+ }
+
+ keyconf->flags &= ~IEEE80211_KEY_FLAG_GENERATE_IV;
+ keyconf->hw_key_idx = HW_KEY_DEFAULT;
+ il->stations[IL_AP_ID].keyinfo.cipher = keyconf->cipher;
+
+ il->_4965.wep_keys[idx].key_size = len;
+ memcpy(&il->_4965.wep_keys[idx].key, &keyconf->key, len);
+
+ ret = il4965_static_wepkey_cmd(il, false);
+
+ D_WEP("Set default WEP key: len=%d idx=%d ret=%d\n", len, idx, ret);
+ return ret;
+}
+
+static int
+il4965_set_wep_dynamic_key_info(struct il_priv *il,
+ struct ieee80211_key_conf *keyconf, u8 sta_id)
+{
+ unsigned long flags;
+ __le16 key_flags = 0;
+ struct il_addsta_cmd sta_cmd;
+
+ lockdep_assert_held(&il->mutex);
+
+ keyconf->flags &= ~IEEE80211_KEY_FLAG_GENERATE_IV;
+
+ key_flags |= (STA_KEY_FLG_WEP | STA_KEY_FLG_MAP_KEY_MSK);
+ key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS);
+ key_flags &= ~STA_KEY_FLG_INVALID;
+
+ if (keyconf->keylen == WEP_KEY_LEN_128)
+ key_flags |= STA_KEY_FLG_KEY_SIZE_MSK;
+
+ if (sta_id == il->hw_params.bcast_id)
+ key_flags |= STA_KEY_MULTICAST_MSK;
+
+ spin_lock_irqsave(&il->sta_lock, flags);
+
+ il->stations[sta_id].keyinfo.cipher = keyconf->cipher;
+ il->stations[sta_id].keyinfo.keylen = keyconf->keylen;
+ il->stations[sta_id].keyinfo.keyidx = keyconf->keyidx;
+
+ memcpy(il->stations[sta_id].keyinfo.key, keyconf->key, keyconf->keylen);
+
+ memcpy(&il->stations[sta_id].sta.key.key[3], keyconf->key,
+ keyconf->keylen);
+
+ if ((il->stations[sta_id].sta.key.
+ key_flags & STA_KEY_FLG_ENCRYPT_MSK) == STA_KEY_FLG_NO_ENC)
+ il->stations[sta_id].sta.key.key_offset =
+ il_get_free_ucode_key_idx(il);
+ /* else, we are overriding an existing key => no need to allocated room
+ * in uCode. */
+
+ WARN(il->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET,
+ "no space for a new key");
+
+ il->stations[sta_id].sta.key.key_flags = key_flags;
+ il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
+ il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
+
+ memcpy(&sta_cmd, &il->stations[sta_id].sta,
+ sizeof(struct il_addsta_cmd));
+ spin_unlock_irqrestore(&il->sta_lock, flags);
+
+ return il_send_add_sta(il, &sta_cmd, CMD_SYNC);
+}
+
+static int
+il4965_set_ccmp_dynamic_key_info(struct il_priv *il,
+ struct ieee80211_key_conf *keyconf, u8 sta_id)
+{
+ unsigned long flags;
+ __le16 key_flags = 0;
+ struct il_addsta_cmd sta_cmd;
+
+ lockdep_assert_held(&il->mutex);
+
+ key_flags |= (STA_KEY_FLG_CCMP | STA_KEY_FLG_MAP_KEY_MSK);
+ key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS);
+ key_flags &= ~STA_KEY_FLG_INVALID;
+
+ if (sta_id == il->hw_params.bcast_id)
+ key_flags |= STA_KEY_MULTICAST_MSK;
+
+ keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
+
+ spin_lock_irqsave(&il->sta_lock, flags);
+ il->stations[sta_id].keyinfo.cipher = keyconf->cipher;
+ il->stations[sta_id].keyinfo.keylen = keyconf->keylen;
+
+ memcpy(il->stations[sta_id].keyinfo.key, keyconf->key, keyconf->keylen);
+
+ memcpy(il->stations[sta_id].sta.key.key, keyconf->key, keyconf->keylen);
+
+ if ((il->stations[sta_id].sta.key.
+ key_flags & STA_KEY_FLG_ENCRYPT_MSK) == STA_KEY_FLG_NO_ENC)
+ il->stations[sta_id].sta.key.key_offset =
+ il_get_free_ucode_key_idx(il);
+ /* else, we are overriding an existing key => no need to allocated room
+ * in uCode. */
+
+ WARN(il->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET,
+ "no space for a new key");
+
+ il->stations[sta_id].sta.key.key_flags = key_flags;
+ il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
+ il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
+
+ memcpy(&sta_cmd, &il->stations[sta_id].sta,
+ sizeof(struct il_addsta_cmd));
+ spin_unlock_irqrestore(&il->sta_lock, flags);
+
+ return il_send_add_sta(il, &sta_cmd, CMD_SYNC);
+}
+
+static int
+il4965_set_tkip_dynamic_key_info(struct il_priv *il,
+ struct ieee80211_key_conf *keyconf, u8 sta_id)
+{
+ unsigned long flags;
+ int ret = 0;
+ __le16 key_flags = 0;
+
+ key_flags |= (STA_KEY_FLG_TKIP | STA_KEY_FLG_MAP_KEY_MSK);
+ key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS);
+ key_flags &= ~STA_KEY_FLG_INVALID;
+
+ if (sta_id == il->hw_params.bcast_id)
+ key_flags |= STA_KEY_MULTICAST_MSK;
+
+ keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
+ keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
+
+ spin_lock_irqsave(&il->sta_lock, flags);
+
+ il->stations[sta_id].keyinfo.cipher = keyconf->cipher;
+ il->stations[sta_id].keyinfo.keylen = 16;
+
+ if ((il->stations[sta_id].sta.key.
+ key_flags & STA_KEY_FLG_ENCRYPT_MSK) == STA_KEY_FLG_NO_ENC)
+ il->stations[sta_id].sta.key.key_offset =
+ il_get_free_ucode_key_idx(il);
+ /* else, we are overriding an existing key => no need to allocated room
+ * in uCode. */
+
+ WARN(il->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET,
+ "no space for a new key");
+
+ il->stations[sta_id].sta.key.key_flags = key_flags;
+
+ /* This copy is acutally not needed: we get the key with each TX */
+ memcpy(il->stations[sta_id].keyinfo.key, keyconf->key, 16);
+
+ memcpy(il->stations[sta_id].sta.key.key, keyconf->key, 16);
+
+ spin_unlock_irqrestore(&il->sta_lock, flags);
+
+ return ret;
+}
+
+void
+il4965_update_tkip_key(struct il_priv *il, struct ieee80211_key_conf *keyconf,
+ struct ieee80211_sta *sta, u32 iv32, u16 *phase1key)
+{
+ u8 sta_id;
+ unsigned long flags;
+ int i;
+
+ if (il_scan_cancel(il)) {
+ /* cancel scan failed, just live w/ bad key and rely
+ briefly on SW decryption */
+ return;
+ }
+
+ sta_id = il_sta_id_or_broadcast(il, sta);
+ if (sta_id == IL_INVALID_STATION)
+ return;
+
+ spin_lock_irqsave(&il->sta_lock, flags);
+
+ il->stations[sta_id].sta.key.tkip_rx_tsc_byte2 = (u8) iv32;
+
+ for (i = 0; i < 5; i++)
+ il->stations[sta_id].sta.key.tkip_rx_ttak[i] =
+ cpu_to_le16(phase1key[i]);
+
+ il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
+ il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
+
+ il_send_add_sta(il, &il->stations[sta_id].sta, CMD_ASYNC);
+
+ spin_unlock_irqrestore(&il->sta_lock, flags);
+}
+
+int
+il4965_remove_dynamic_key(struct il_priv *il,
+ struct ieee80211_key_conf *keyconf, u8 sta_id)
+{
+ unsigned long flags;
+ u16 key_flags;
+ u8 keyidx;
+ struct il_addsta_cmd sta_cmd;
+
+ lockdep_assert_held(&il->mutex);
+
+ il->_4965.key_mapping_keys--;
+
+ spin_lock_irqsave(&il->sta_lock, flags);
+ key_flags = le16_to_cpu(il->stations[sta_id].sta.key.key_flags);
+ keyidx = (key_flags >> STA_KEY_FLG_KEYID_POS) & 0x3;
+
+ D_WEP("Remove dynamic key: idx=%d sta=%d\n", keyconf->keyidx, sta_id);
+
+ if (keyconf->keyidx != keyidx) {
+ /* We need to remove a key with idx different that the one
+ * in the uCode. This means that the key we need to remove has
+ * been replaced by another one with different idx.
+ * Don't do anything and return ok
+ */
+ spin_unlock_irqrestore(&il->sta_lock, flags);
+ return 0;
+ }
+
+ if (il->stations[sta_id].sta.key.key_flags & STA_KEY_FLG_INVALID) {
+ IL_WARN("Removing wrong key %d 0x%x\n", keyconf->keyidx,
+ key_flags);
+ spin_unlock_irqrestore(&il->sta_lock, flags);
+ return 0;
+ }
+
+ if (!test_and_clear_bit
+ (il->stations[sta_id].sta.key.key_offset, &il->ucode_key_table))
+ IL_ERR("idx %d not used in uCode key table.\n",
+ il->stations[sta_id].sta.key.key_offset);
+ memset(&il->stations[sta_id].keyinfo, 0, sizeof(struct il_hw_key));
+ memset(&il->stations[sta_id].sta.key, 0, sizeof(struct il4965_keyinfo));
+ il->stations[sta_id].sta.key.key_flags =
+ STA_KEY_FLG_NO_ENC | STA_KEY_FLG_INVALID;
+ il->stations[sta_id].sta.key.key_offset = keyconf->hw_key_idx;
+ il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
+ il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
+
+ if (il_is_rfkill(il)) {
+ D_WEP
+ ("Not sending C_ADD_STA command because RFKILL enabled.\n");
+ spin_unlock_irqrestore(&il->sta_lock, flags);
+ return 0;
+ }
+ memcpy(&sta_cmd, &il->stations[sta_id].sta,
+ sizeof(struct il_addsta_cmd));
+ spin_unlock_irqrestore(&il->sta_lock, flags);
+
+ return il_send_add_sta(il, &sta_cmd, CMD_SYNC);
+}
+
+int
+il4965_set_dynamic_key(struct il_priv *il, struct ieee80211_key_conf *keyconf,
+ u8 sta_id)
+{
+ int ret;
+
+ lockdep_assert_held(&il->mutex);
+
+ il->_4965.key_mapping_keys++;
+ keyconf->hw_key_idx = HW_KEY_DYNAMIC;
+
+ switch (keyconf->cipher) {
+ case WLAN_CIPHER_SUITE_CCMP:
+ ret =
+ il4965_set_ccmp_dynamic_key_info(il, keyconf, sta_id);
+ break;
+ case WLAN_CIPHER_SUITE_TKIP:
+ ret =
+ il4965_set_tkip_dynamic_key_info(il, keyconf, sta_id);
+ break;
+ case WLAN_CIPHER_SUITE_WEP40:
+ case WLAN_CIPHER_SUITE_WEP104:
+ ret = il4965_set_wep_dynamic_key_info(il, keyconf, sta_id);
+ break;
+ default:
+ IL_ERR("Unknown alg: %s cipher = %x\n", __func__,
+ keyconf->cipher);
+ ret = -EINVAL;
+ }
+
+ D_WEP("Set dynamic key: cipher=%x len=%d idx=%d sta=%d ret=%d\n",
+ keyconf->cipher, keyconf->keylen, keyconf->keyidx, sta_id, ret);
+
+ return ret;
+}
+
+/**
+ * il4965_alloc_bcast_station - add broadcast station into driver's station table.
+ *
+ * This adds the broadcast station into the driver's station table
+ * and marks it driver active, so that it will be restored to the
+ * device at the next best time.
+ */
+int
+il4965_alloc_bcast_station(struct il_priv *il)
+{
+ struct il_link_quality_cmd *link_cmd;
+ unsigned long flags;
+ u8 sta_id;
+
+ spin_lock_irqsave(&il->sta_lock, flags);
+ sta_id = il_prep_station(il, il_bcast_addr, false, NULL);
+ if (sta_id == IL_INVALID_STATION) {
+ IL_ERR("Unable to prepare broadcast station\n");
+ spin_unlock_irqrestore(&il->sta_lock, flags);
+
+ return -EINVAL;
+ }
+
+ il->stations[sta_id].used |= IL_STA_DRIVER_ACTIVE;
+ il->stations[sta_id].used |= IL_STA_BCAST;
+ spin_unlock_irqrestore(&il->sta_lock, flags);
+
+ link_cmd = il4965_sta_alloc_lq(il, sta_id);
+ if (!link_cmd) {
+ IL_ERR
+ ("Unable to initialize rate scaling for bcast station.\n");
+ return -ENOMEM;
+ }
+
+ spin_lock_irqsave(&il->sta_lock, flags);
+ il->stations[sta_id].lq = link_cmd;
+ spin_unlock_irqrestore(&il->sta_lock, flags);
+
+ return 0;
+}
+
+/**
+ * il4965_update_bcast_station - update broadcast station's LQ command
+ *
+ * Only used by iwl4965. Placed here to have all bcast station management
+ * code together.
+ */
+static int
+il4965_update_bcast_station(struct il_priv *il)
+{
+ unsigned long flags;
+ struct il_link_quality_cmd *link_cmd;
+ u8 sta_id = il->hw_params.bcast_id;
+
+ link_cmd = il4965_sta_alloc_lq(il, sta_id);
+ if (!link_cmd) {
+ IL_ERR("Unable to initialize rate scaling for bcast sta.\n");
+ return -ENOMEM;
+ }
+
+ spin_lock_irqsave(&il->sta_lock, flags);
+ if (il->stations[sta_id].lq)
+ kfree(il->stations[sta_id].lq);
+ else
+ D_INFO("Bcast sta rate scaling has not been initialized.\n");
+ il->stations[sta_id].lq = link_cmd;
+ spin_unlock_irqrestore(&il->sta_lock, flags);
+
+ return 0;
+}
+
+int
+il4965_update_bcast_stations(struct il_priv *il)
+{
+ return il4965_update_bcast_station(il);
+}
+
+/**
+ * il4965_sta_tx_modify_enable_tid - Enable Tx for this TID in station table
+ */
+int
+il4965_sta_tx_modify_enable_tid(struct il_priv *il, int sta_id, int tid)
+{
+ unsigned long flags;
+ struct il_addsta_cmd sta_cmd;
+
+ lockdep_assert_held(&il->mutex);
+
+ /* Remove "disable" flag, to enable Tx for this TID */
+ spin_lock_irqsave(&il->sta_lock, flags);
+ il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_TID_DISABLE_TX;
+ il->stations[sta_id].sta.tid_disable_tx &= cpu_to_le16(~(1 << tid));
+ il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
+ memcpy(&sta_cmd, &il->stations[sta_id].sta,
+ sizeof(struct il_addsta_cmd));
+ spin_unlock_irqrestore(&il->sta_lock, flags);
+
+ return il_send_add_sta(il, &sta_cmd, CMD_SYNC);
+}
+
+int
+il4965_sta_rx_agg_start(struct il_priv *il, struct ieee80211_sta *sta, int tid,
+ u16 ssn)
+{
+ unsigned long flags;
+ int sta_id;
+ struct il_addsta_cmd sta_cmd;
+
+ lockdep_assert_held(&il->mutex);
+
+ sta_id = il_sta_id(sta);
+ if (sta_id == IL_INVALID_STATION)
+ return -ENXIO;
+
+ spin_lock_irqsave(&il->sta_lock, flags);
+ il->stations[sta_id].sta.station_flags_msk = 0;
+ il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_ADDBA_TID_MSK;
+ il->stations[sta_id].sta.add_immediate_ba_tid = (u8) tid;
+ il->stations[sta_id].sta.add_immediate_ba_ssn = cpu_to_le16(ssn);
+ il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
+ memcpy(&sta_cmd, &il->stations[sta_id].sta,
+ sizeof(struct il_addsta_cmd));
+ spin_unlock_irqrestore(&il->sta_lock, flags);
+
+ return il_send_add_sta(il, &sta_cmd, CMD_SYNC);
+}
+
+int
+il4965_sta_rx_agg_stop(struct il_priv *il, struct ieee80211_sta *sta, int tid)
+{
+ unsigned long flags;
+ int sta_id;
+ struct il_addsta_cmd sta_cmd;
+
+ lockdep_assert_held(&il->mutex);
+
+ sta_id = il_sta_id(sta);
+ if (sta_id == IL_INVALID_STATION) {
+ IL_ERR("Invalid station for AGG tid %d\n", tid);
+ return -ENXIO;
+ }
+
+ spin_lock_irqsave(&il->sta_lock, flags);
+ il->stations[sta_id].sta.station_flags_msk = 0;
+ il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_DELBA_TID_MSK;
+ il->stations[sta_id].sta.remove_immediate_ba_tid = (u8) tid;
+ il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
+ memcpy(&sta_cmd, &il->stations[sta_id].sta,
+ sizeof(struct il_addsta_cmd));
+ spin_unlock_irqrestore(&il->sta_lock, flags);
+
+ return il_send_add_sta(il, &sta_cmd, CMD_SYNC);
+}
+
+void
+il4965_sta_modify_sleep_tx_count(struct il_priv *il, int sta_id, int cnt)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&il->sta_lock, flags);
+ il->stations[sta_id].sta.station_flags |= STA_FLG_PWR_SAVE_MSK;
+ il->stations[sta_id].sta.station_flags_msk = STA_FLG_PWR_SAVE_MSK;
+ il->stations[sta_id].sta.sta.modify_mask =
+ STA_MODIFY_SLEEP_TX_COUNT_MSK;
+ il->stations[sta_id].sta.sleep_tx_count = cpu_to_le16(cnt);
+ il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
+ il_send_add_sta(il, &il->stations[sta_id].sta, CMD_ASYNC);
+ spin_unlock_irqrestore(&il->sta_lock, flags);
+
+}
+
+void
+il4965_update_chain_flags(struct il_priv *il)
+{
+ if (il->ops->set_rxon_chain) {
+ il->ops->set_rxon_chain(il);
+ if (il->active.rx_chain != il->staging.rx_chain)
+ il_commit_rxon(il);
+ }
+}
+
+static void
+il4965_clear_free_frames(struct il_priv *il)
+{
+ struct list_head *element;
+
+ D_INFO("%d frames on pre-allocated heap on clear.\n", il->frames_count);
+
+ while (!list_empty(&il->free_frames)) {
+ element = il->free_frames.next;
+ list_del(element);
+ kfree(list_entry(element, struct il_frame, list));
+ il->frames_count--;
+ }
+
+ if (il->frames_count) {
+ IL_WARN("%d frames still in use. Did we lose one?\n",
+ il->frames_count);
+ il->frames_count = 0;
+ }
+}
+
+static struct il_frame *
+il4965_get_free_frame(struct il_priv *il)
+{
+ struct il_frame *frame;
+ struct list_head *element;
+ if (list_empty(&il->free_frames)) {
+ frame = kzalloc(sizeof(*frame), GFP_KERNEL);
+ if (!frame) {
+ IL_ERR("Could not allocate frame!\n");
+ return NULL;
+ }
+
+ il->frames_count++;
+ return frame;
+ }
+
+ element = il->free_frames.next;
+ list_del(element);
+ return list_entry(element, struct il_frame, list);
+}
+
+static void
+il4965_free_frame(struct il_priv *il, struct il_frame *frame)
+{
+ memset(frame, 0, sizeof(*frame));
+ list_add(&frame->list, &il->free_frames);
+}
+
+static u32
+il4965_fill_beacon_frame(struct il_priv *il, struct ieee80211_hdr *hdr,
+ int left)
+{
+ lockdep_assert_held(&il->mutex);
+
+ if (!il->beacon_skb)
+ return 0;
+
+ if (il->beacon_skb->len > left)
+ return 0;
+
+ memcpy(hdr, il->beacon_skb->data, il->beacon_skb->len);
+
+ return il->beacon_skb->len;
+}
+
+/* Parse the beacon frame to find the TIM element and set tim_idx & tim_size */
+static void
+il4965_set_beacon_tim(struct il_priv *il,
+ struct il_tx_beacon_cmd *tx_beacon_cmd, u8 * beacon,
+ u32 frame_size)
+{
+ u16 tim_idx;
+ struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)beacon;
+
+ /*
+ * The idx is relative to frame start but we start looking at the
+ * variable-length part of the beacon.
+ */
+ tim_idx = mgmt->u.beacon.variable - beacon;
+
+ /* Parse variable-length elements of beacon to find WLAN_EID_TIM */
+ while ((tim_idx < (frame_size - 2)) &&
+ (beacon[tim_idx] != WLAN_EID_TIM))
+ tim_idx += beacon[tim_idx + 1] + 2;
+
+ /* If TIM field was found, set variables */
+ if ((tim_idx < (frame_size - 1)) && (beacon[tim_idx] == WLAN_EID_TIM)) {
+ tx_beacon_cmd->tim_idx = cpu_to_le16(tim_idx);
+ tx_beacon_cmd->tim_size = beacon[tim_idx + 1];
+ } else
+ IL_WARN("Unable to find TIM Element in beacon\n");
+}
+
+static unsigned int
+il4965_hw_get_beacon_cmd(struct il_priv *il, struct il_frame *frame)
+{
+ struct il_tx_beacon_cmd *tx_beacon_cmd;
+ u32 frame_size;
+ u32 rate_flags;
+ u32 rate;
+ /*
+ * We have to set up the TX command, the TX Beacon command, and the
+ * beacon contents.
+ */
+
+ lockdep_assert_held(&il->mutex);
+
+ if (!il->beacon_enabled) {
+ IL_ERR("Trying to build beacon without beaconing enabled\n");
+ return 0;
+ }
+
+ /* Initialize memory */
+ tx_beacon_cmd = &frame->u.beacon;
+ memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd));
+
+ /* Set up TX beacon contents */
+ frame_size =
+ il4965_fill_beacon_frame(il, tx_beacon_cmd->frame,
+ sizeof(frame->u) - sizeof(*tx_beacon_cmd));
+ if (WARN_ON_ONCE(frame_size > MAX_MPDU_SIZE))
+ return 0;
+ if (!frame_size)
+ return 0;
+
+ /* Set up TX command fields */
+ tx_beacon_cmd->tx.len = cpu_to_le16((u16) frame_size);
+ tx_beacon_cmd->tx.sta_id = il->hw_params.bcast_id;
+ tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
+ tx_beacon_cmd->tx.tx_flags =
+ TX_CMD_FLG_SEQ_CTL_MSK | TX_CMD_FLG_TSF_MSK |
+ TX_CMD_FLG_STA_RATE_MSK;
+
+ /* Set up TX beacon command fields */
+ il4965_set_beacon_tim(il, tx_beacon_cmd, (u8 *) tx_beacon_cmd->frame,
+ frame_size);
+
+ /* Set up packet rate and flags */
+ rate = il_get_lowest_plcp(il);
+ il4965_toggle_tx_ant(il, &il->mgmt_tx_ant, il->hw_params.valid_tx_ant);
+ rate_flags = BIT(il->mgmt_tx_ant) << RATE_MCS_ANT_POS;
+ if ((rate >= IL_FIRST_CCK_RATE) && (rate <= IL_LAST_CCK_RATE))
+ rate_flags |= RATE_MCS_CCK_MSK;
+ tx_beacon_cmd->tx.rate_n_flags = cpu_to_le32(rate | rate_flags);
+
+ return sizeof(*tx_beacon_cmd) + frame_size;
+}
+
+int
+il4965_send_beacon_cmd(struct il_priv *il)
+{
+ struct il_frame *frame;
+ unsigned int frame_size;
+ int rc;
+
+ frame = il4965_get_free_frame(il);
+ if (!frame) {
+ IL_ERR("Could not obtain free frame buffer for beacon "
+ "command.\n");
+ return -ENOMEM;
+ }
+
+ frame_size = il4965_hw_get_beacon_cmd(il, frame);
+ if (!frame_size) {
+ IL_ERR("Error configuring the beacon command\n");
+ il4965_free_frame(il, frame);
+ return -EINVAL;
+ }
+
+ rc = il_send_cmd_pdu(il, C_TX_BEACON, frame_size, &frame->u.cmd[0]);
+
+ il4965_free_frame(il, frame);
+
+ return rc;
+}
+
+static inline dma_addr_t
+il4965_tfd_tb_get_addr(struct il_tfd *tfd, u8 idx)
+{
+ struct il_tfd_tb *tb = &tfd->tbs[idx];
+
+ dma_addr_t addr = get_unaligned_le32(&tb->lo);
+ if (sizeof(dma_addr_t) > sizeof(u32))
+ addr |=
+ ((dma_addr_t) (le16_to_cpu(tb->hi_n_len) & 0xF) << 16) <<
+ 16;
+
+ return addr;
+}
+
+static inline u16
+il4965_tfd_tb_get_len(struct il_tfd *tfd, u8 idx)
+{
+ struct il_tfd_tb *tb = &tfd->tbs[idx];
+
+ return le16_to_cpu(tb->hi_n_len) >> 4;
+}
+
+static inline void
+il4965_tfd_set_tb(struct il_tfd *tfd, u8 idx, dma_addr_t addr, u16 len)
+{
+ struct il_tfd_tb *tb = &tfd->tbs[idx];
+ u16 hi_n_len = len << 4;
+
+ put_unaligned_le32(addr, &tb->lo);
+ if (sizeof(dma_addr_t) > sizeof(u32))
+ hi_n_len |= ((addr >> 16) >> 16) & 0xF;
+
+ tb->hi_n_len = cpu_to_le16(hi_n_len);
+
+ tfd->num_tbs = idx + 1;
+}
+
+static inline u8
+il4965_tfd_get_num_tbs(struct il_tfd *tfd)
+{
+ return tfd->num_tbs & 0x1f;
+}
+
+/**
+ * il4965_hw_txq_free_tfd - Free all chunks referenced by TFD [txq->q.read_ptr]
+ * @il - driver ilate data
+ * @txq - tx queue
+ *
+ * Does NOT advance any TFD circular buffer read/write idxes
+ * Does NOT free the TFD itself (which is within circular buffer)
+ */
+void
+il4965_hw_txq_free_tfd(struct il_priv *il, struct il_tx_queue *txq)
+{
+ struct il_tfd *tfd_tmp = (struct il_tfd *)txq->tfds;
+ struct il_tfd *tfd;
+ struct pci_dev *dev = il->pci_dev;
+ int idx = txq->q.read_ptr;
+ int i;
+ int num_tbs;
+
+ tfd = &tfd_tmp[idx];
+
+ /* Sanity check on number of chunks */
+ num_tbs = il4965_tfd_get_num_tbs(tfd);
+
+ if (num_tbs >= IL_NUM_OF_TBS) {
+ IL_ERR("Too many chunks: %i\n", num_tbs);
+ /* @todo issue fatal error, it is quite serious situation */
+ return;
+ }
+
+ /* Unmap tx_cmd */
+ if (num_tbs)
+ pci_unmap_single(dev, dma_unmap_addr(&txq->meta[idx], mapping),
+ dma_unmap_len(&txq->meta[idx], len),
+ PCI_DMA_BIDIRECTIONAL);
+
+ /* Unmap chunks, if any. */
+ for (i = 1; i < num_tbs; i++)
+ pci_unmap_single(dev, il4965_tfd_tb_get_addr(tfd, i),
+ il4965_tfd_tb_get_len(tfd, i),
+ PCI_DMA_TODEVICE);
+
+ /* free SKB */
+ if (txq->skbs) {
+ struct sk_buff *skb = txq->skbs[txq->q.read_ptr];
+
+ /* can be called from irqs-disabled context */
+ if (skb) {
+ dev_kfree_skb_any(skb);
+ txq->skbs[txq->q.read_ptr] = NULL;
+ }
+ }
+}
+
+int
+il4965_hw_txq_attach_buf_to_tfd(struct il_priv *il, struct il_tx_queue *txq,
+ dma_addr_t addr, u16 len, u8 reset, u8 pad)
+{
+ struct il_queue *q;
+ struct il_tfd *tfd, *tfd_tmp;
+ u32 num_tbs;
+
+ q = &txq->q;
+ tfd_tmp = (struct il_tfd *)txq->tfds;
+ tfd = &tfd_tmp[q->write_ptr];
+
+ if (reset)
+ memset(tfd, 0, sizeof(*tfd));
+
+ num_tbs = il4965_tfd_get_num_tbs(tfd);
+
+ /* Each TFD can point to a maximum 20 Tx buffers */
+ if (num_tbs >= IL_NUM_OF_TBS) {
+ IL_ERR("Error can not send more than %d chunks\n",
+ IL_NUM_OF_TBS);
+ return -EINVAL;
+ }
+
+ BUG_ON(addr & ~DMA_BIT_MASK(36));
+ if (unlikely(addr & ~IL_TX_DMA_MASK))
+ IL_ERR("Unaligned address = %llx\n", (unsigned long long)addr);
+
+ il4965_tfd_set_tb(tfd, num_tbs, addr, len);
+
+ return 0;
+}
+
+/*
+ * Tell nic where to find circular buffer of Tx Frame Descriptors for
+ * given Tx queue, and enable the DMA channel used for that queue.
+ *
+ * 4965 supports up to 16 Tx queues in DRAM, mapped to up to 8 Tx DMA
+ * channels supported in hardware.
+ */
+int
+il4965_hw_tx_queue_init(struct il_priv *il, struct il_tx_queue *txq)
+{
+ int txq_id = txq->q.id;
+
+ /* Circular buffer (TFD queue in DRAM) physical base address */
+ il_wr(il, FH49_MEM_CBBC_QUEUE(txq_id), txq->q.dma_addr >> 8);
+
+ return 0;
+}
+
+/******************************************************************************
+ *
+ * Generic RX handler implementations
+ *
+ ******************************************************************************/
+static void
+il4965_hdl_alive(struct il_priv *il, struct il_rx_buf *rxb)
+{
+ struct il_rx_pkt *pkt = rxb_addr(rxb);
+ struct il_alive_resp *palive;
+ struct delayed_work *pwork;
+
+ palive = &pkt->u.alive_frame;
+
+ D_INFO("Alive ucode status 0x%08X revision " "0x%01X 0x%01X\n",
+ palive->is_valid, palive->ver_type, palive->ver_subtype);
+
+ if (palive->ver_subtype == INITIALIZE_SUBTYPE) {
+ D_INFO("Initialization Alive received.\n");
+ memcpy(&il->card_alive_init, &pkt->u.alive_frame,
+ sizeof(struct il_init_alive_resp));
+ pwork = &il->init_alive_start;
+ } else {
+ D_INFO("Runtime Alive received.\n");
+ memcpy(&il->card_alive, &pkt->u.alive_frame,
+ sizeof(struct il_alive_resp));
+ pwork = &il->alive_start;
+ }
+
+ /* We delay the ALIVE response by 5ms to
+ * give the HW RF Kill time to activate... */
+ if (palive->is_valid == UCODE_VALID_OK)
+ queue_delayed_work(il->workqueue, pwork, msecs_to_jiffies(5));
+ else
+ IL_WARN("uCode did not respond OK.\n");
+}
+
+/**
+ * il4965_bg_stats_periodic - Timer callback to queue stats
+ *
+ * This callback is provided in order to send a stats request.
+ *
+ * This timer function is continually reset to execute within
+ * 60 seconds since the last N_STATS was received. We need to
+ * ensure we receive the stats in order to update the temperature
+ * used for calibrating the TXPOWER.
+ */
+static void
+il4965_bg_stats_periodic(unsigned long data)
+{
+ struct il_priv *il = (struct il_priv *)data;
+
+ if (test_bit(S_EXIT_PENDING, &il->status))
+ return;
+
+ /* dont send host command if rf-kill is on */
+ if (!il_is_ready_rf(il))
+ return;
+
+ il_send_stats_request(il, CMD_ASYNC, false);
+}
+
+static void
+il4965_hdl_beacon(struct il_priv *il, struct il_rx_buf *rxb)
+{
+ struct il_rx_pkt *pkt = rxb_addr(rxb);
+ struct il4965_beacon_notif *beacon =
+ (struct il4965_beacon_notif *)pkt->u.raw;
+#ifdef CONFIG_IWLEGACY_DEBUG
+ u8 rate = il4965_hw_get_rate(beacon->beacon_notify_hdr.rate_n_flags);
+
+ D_RX("beacon status %x retries %d iss %d tsf:0x%.8x%.8x rate %d\n",
+ le32_to_cpu(beacon->beacon_notify_hdr.u.status) & TX_STATUS_MSK,
+ beacon->beacon_notify_hdr.failure_frame,
+ le32_to_cpu(beacon->ibss_mgr_status),
+ le32_to_cpu(beacon->high_tsf), le32_to_cpu(beacon->low_tsf), rate);
+#endif
+ il->ibss_manager = le32_to_cpu(beacon->ibss_mgr_status);
+}
+
+static void
+il4965_perform_ct_kill_task(struct il_priv *il)
+{
+ unsigned long flags;
+
+ D_POWER("Stop all queues\n");
+
+ if (il->mac80211_registered)
+ ieee80211_stop_queues(il->hw);
+
+ _il_wr(il, CSR_UCODE_DRV_GP1_SET,
+ CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT);
+ _il_rd(il, CSR_UCODE_DRV_GP1);
+
+ spin_lock_irqsave(&il->reg_lock, flags);
+ if (likely(_il_grab_nic_access(il)))
+ _il_release_nic_access(il);
+ spin_unlock_irqrestore(&il->reg_lock, flags);
+}
+
+/* Handle notification from uCode that card's power state is changing
+ * due to software, hardware, or critical temperature RFKILL */
+static void
+il4965_hdl_card_state(struct il_priv *il, struct il_rx_buf *rxb)
+{
+ struct il_rx_pkt *pkt = rxb_addr(rxb);
+ u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags);
+ unsigned long status = il->status;
+
+ D_RF_KILL("Card state received: HW:%s SW:%s CT:%s\n",
+ (flags & HW_CARD_DISABLED) ? "Kill" : "On",
+ (flags & SW_CARD_DISABLED) ? "Kill" : "On",
+ (flags & CT_CARD_DISABLED) ? "Reached" : "Not reached");
+
+ if (flags & (SW_CARD_DISABLED | HW_CARD_DISABLED | CT_CARD_DISABLED)) {
+
+ _il_wr(il, CSR_UCODE_DRV_GP1_SET,
+ CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
+
+ il_wr(il, HBUS_TARG_MBX_C, HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED);
+
+ if (!(flags & RXON_CARD_DISABLED)) {
+ _il_wr(il, CSR_UCODE_DRV_GP1_CLR,
+ CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
+ il_wr(il, HBUS_TARG_MBX_C,
+ HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED);
+ }
+ }
+
+ if (flags & CT_CARD_DISABLED)
+ il4965_perform_ct_kill_task(il);
+
+ if (flags & HW_CARD_DISABLED)
+ set_bit(S_RFKILL, &il->status);
+ else
+ clear_bit(S_RFKILL, &il->status);
+
+ if (!(flags & RXON_CARD_DISABLED))
+ il_scan_cancel(il);
+
+ if ((test_bit(S_RFKILL, &status) !=
+ test_bit(S_RFKILL, &il->status)))
+ wiphy_rfkill_set_hw_state(il->hw->wiphy,
+ test_bit(S_RFKILL, &il->status));
+ else
+ wake_up(&il->wait_command_queue);
+}
+
+/**
+ * il4965_setup_handlers - Initialize Rx handler callbacks
+ *
+ * Setup the RX handlers for each of the reply types sent from the uCode
+ * to the host.
+ *
+ * This function chains into the hardware specific files for them to setup
+ * any hardware specific handlers as well.
+ */
+static void
+il4965_setup_handlers(struct il_priv *il)
+{
+ il->handlers[N_ALIVE] = il4965_hdl_alive;
+ il->handlers[N_ERROR] = il_hdl_error;
+ il->handlers[N_CHANNEL_SWITCH] = il_hdl_csa;
+ il->handlers[N_SPECTRUM_MEASUREMENT] = il_hdl_spectrum_measurement;
+ il->handlers[N_PM_SLEEP] = il_hdl_pm_sleep;
+ il->handlers[N_PM_DEBUG_STATS] = il_hdl_pm_debug_stats;
+ il->handlers[N_BEACON] = il4965_hdl_beacon;
+
+ /*
+ * The same handler is used for both the REPLY to a discrete
+ * stats request from the host as well as for the periodic
+ * stats notifications (after received beacons) from the uCode.
+ */
+ il->handlers[C_STATS] = il4965_hdl_c_stats;
+ il->handlers[N_STATS] = il4965_hdl_stats;
+
+ il_setup_rx_scan_handlers(il);
+
+ /* status change handler */
+ il->handlers[N_CARD_STATE] = il4965_hdl_card_state;
+
+ il->handlers[N_MISSED_BEACONS] = il4965_hdl_missed_beacon;
+ /* Rx handlers */
+ il->handlers[N_RX_PHY] = il4965_hdl_rx_phy;
+ il->handlers[N_RX_MPDU] = il4965_hdl_rx;
+ il->handlers[N_RX] = il4965_hdl_rx;
+ /* block ack */
+ il->handlers[N_COMPRESSED_BA] = il4965_hdl_compressed_ba;
+ /* Tx response */
+ il->handlers[C_TX] = il4965_hdl_tx;
+}
+
+/**
+ * il4965_rx_handle - Main entry function for receiving responses from uCode
+ *
+ * Uses the il->handlers callback function array to invoke
+ * the appropriate handlers, including command responses,
+ * frame-received notifications, and other notifications.
+ */
+void
+il4965_rx_handle(struct il_priv *il)
+{
+ struct il_rx_buf *rxb;
+ struct il_rx_pkt *pkt;
+ struct il_rx_queue *rxq = &il->rxq;
+ u32 r, i;
+ int reclaim;
+ unsigned long flags;
+ u8 fill_rx = 0;
+ u32 count = 8;
+ int total_empty;
+
+ /* uCode's read idx (stored in shared DRAM) indicates the last Rx
+ * buffer that the driver may process (last buffer filled by ucode). */
+ r = le16_to_cpu(rxq->rb_stts->closed_rb_num) & 0x0FFF;
+ i = rxq->read;
+
+ /* Rx interrupt, but nothing sent from uCode */
+ if (i == r)
+ D_RX("r = %d, i = %d\n", r, i);
+
+ /* calculate total frames need to be restock after handling RX */
+ total_empty = r - rxq->write_actual;
+ if (total_empty < 0)
+ total_empty += RX_QUEUE_SIZE;
+
+ if (total_empty > (RX_QUEUE_SIZE / 2))
+ fill_rx = 1;
+
+ while (i != r) {
+ int len;
+
+ rxb = rxq->queue[i];
+
+ /* If an RXB doesn't have a Rx queue slot associated with it,
+ * then a bug has been introduced in the queue refilling
+ * routines -- catch it here */
+ BUG_ON(rxb == NULL);
+
+ rxq->queue[i] = NULL;
+
+ pci_unmap_page(il->pci_dev, rxb->page_dma,
+ PAGE_SIZE << il->hw_params.rx_page_order,
+ PCI_DMA_FROMDEVICE);
+ pkt = rxb_addr(rxb);
+
+ len = le32_to_cpu(pkt->len_n_flags) & IL_RX_FRAME_SIZE_MSK;
+ len += sizeof(u32); /* account for status word */
+
+ reclaim = il_need_reclaim(il, pkt);
+
+ /* Based on type of command response or notification,
+ * handle those that need handling via function in
+ * handlers table. See il4965_setup_handlers() */
+ if (il->handlers[pkt->hdr.cmd]) {
+ D_RX("r = %d, i = %d, %s, 0x%02x\n", r, i,
+ il_get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
+ il->isr_stats.handlers[pkt->hdr.cmd]++;
+ il->handlers[pkt->hdr.cmd] (il, rxb);
+ } else {
+ /* No handling needed */
+ D_RX("r %d i %d No handler needed for %s, 0x%02x\n", r,
+ i, il_get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
+ }
+
+ /*
+ * XXX: After here, we should always check rxb->page
+ * against NULL before touching it or its virtual
+ * memory (pkt). Because some handler might have
+ * already taken or freed the pages.
+ */
+
+ if (reclaim) {
+ /* Invoke any callbacks, transfer the buffer to caller,
+ * and fire off the (possibly) blocking il_send_cmd()
+ * as we reclaim the driver command queue */
+ if (rxb->page)
+ il_tx_cmd_complete(il, rxb);
+ else
+ IL_WARN("Claim null rxb?\n");
+ }
+
+ /* Reuse the page if possible. For notification packets and
+ * SKBs that fail to Rx correctly, add them back into the
+ * rx_free list for reuse later. */
+ spin_lock_irqsave(&rxq->lock, flags);
+ if (rxb->page != NULL) {
+ rxb->page_dma =
+ pci_map_page(il->pci_dev, rxb->page, 0,
+ PAGE_SIZE << il->hw_params.
+ rx_page_order, PCI_DMA_FROMDEVICE);
+
+ if (unlikely(pci_dma_mapping_error(il->pci_dev,
+ rxb->page_dma))) {
+ __il_free_pages(il, rxb->page);
+ rxb->page = NULL;
+ list_add_tail(&rxb->list, &rxq->rx_used);
+ } else {
+ list_add_tail(&rxb->list, &rxq->rx_free);
+ rxq->free_count++;
+ }
+ } else
+ list_add_tail(&rxb->list, &rxq->rx_used);
+
+ spin_unlock_irqrestore(&rxq->lock, flags);
+
+ i = (i + 1) & RX_QUEUE_MASK;
+ /* If there are a lot of unused frames,
+ * restock the Rx queue so ucode wont assert. */
+ if (fill_rx) {
+ count++;
+ if (count >= 8) {
+ rxq->read = i;
+ il4965_rx_replenish_now(il);
+ count = 0;
+ }
+ }
+ }
+
+ /* Backtrack one entry */
+ rxq->read = i;
+ if (fill_rx)
+ il4965_rx_replenish_now(il);
+ else
+ il4965_rx_queue_restock(il);
+}
+
+/* call this function to flush any scheduled tasklet */
+static inline void
+il4965_synchronize_irq(struct il_priv *il)
+{
+ /* wait to make sure we flush pending tasklet */
+ synchronize_irq(il->pci_dev->irq);
+ tasklet_kill(&il->irq_tasklet);
+}
+
+static void
+il4965_irq_tasklet(struct il_priv *il)
+{
+ u32 inta, handled = 0;
+ u32 inta_fh;
+ unsigned long flags;
+ u32 i;
+#ifdef CONFIG_IWLEGACY_DEBUG
+ u32 inta_mask;
+#endif
+
+ spin_lock_irqsave(&il->lock, flags);
+
+ /* Ack/clear/reset pending uCode interrupts.
+ * Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
+ * and will clear only when CSR_FH_INT_STATUS gets cleared. */
+ inta = _il_rd(il, CSR_INT);
+ _il_wr(il, CSR_INT, inta);
+
+ /* Ack/clear/reset pending flow-handler (DMA) interrupts.
+ * Any new interrupts that happen after this, either while we're
+ * in this tasklet, or later, will show up in next ISR/tasklet. */
+ inta_fh = _il_rd(il, CSR_FH_INT_STATUS);
+ _il_wr(il, CSR_FH_INT_STATUS, inta_fh);
+
+#ifdef CONFIG_IWLEGACY_DEBUG
+ if (il_get_debug_level(il) & IL_DL_ISR) {
+ /* just for debug */
+ inta_mask = _il_rd(il, CSR_INT_MASK);
+ D_ISR("inta 0x%08x, enabled 0x%08x, fh 0x%08x\n", inta,
+ inta_mask, inta_fh);
+ }
+#endif
+
+ spin_unlock_irqrestore(&il->lock, flags);
+
+ /* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not
+ * atomic, make sure that inta covers all the interrupts that
+ * we've discovered, even if FH interrupt came in just after
+ * reading CSR_INT. */
+ if (inta_fh & CSR49_FH_INT_RX_MASK)
+ inta |= CSR_INT_BIT_FH_RX;
+ if (inta_fh & CSR49_FH_INT_TX_MASK)
+ inta |= CSR_INT_BIT_FH_TX;
+
+ /* Now service all interrupt bits discovered above. */
+ if (inta & CSR_INT_BIT_HW_ERR) {
+ IL_ERR("Hardware error detected. Restarting.\n");
+
+ /* Tell the device to stop sending interrupts */
+ il_disable_interrupts(il);
+
+ il->isr_stats.hw++;
+ il_irq_handle_error(il);
+
+ handled |= CSR_INT_BIT_HW_ERR;
+
+ return;
+ }
+#ifdef CONFIG_IWLEGACY_DEBUG
+ if (il_get_debug_level(il) & (IL_DL_ISR)) {
+ /* NIC fires this, but we don't use it, redundant with WAKEUP */
+ if (inta & CSR_INT_BIT_SCD) {
+ D_ISR("Scheduler finished to transmit "
+ "the frame/frames.\n");
+ il->isr_stats.sch++;
+ }
+
+ /* Alive notification via Rx interrupt will do the real work */
+ if (inta & CSR_INT_BIT_ALIVE) {
+ D_ISR("Alive interrupt\n");
+ il->isr_stats.alive++;
+ }
+ }
+#endif
+ /* Safely ignore these bits for debug checks below */
+ inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
+
+ /* HW RF KILL switch toggled */
+ if (inta & CSR_INT_BIT_RF_KILL) {
+ int hw_rf_kill = 0;
+
+ if (!(_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW))
+ hw_rf_kill = 1;
+
+ IL_WARN("RF_KILL bit toggled to %s.\n",
+ hw_rf_kill ? "disable radio" : "enable radio");
+
+ il->isr_stats.rfkill++;
+
+ /* driver only loads ucode once setting the interface up.
+ * the driver allows loading the ucode even if the radio
+ * is killed. Hence update the killswitch state here. The
+ * rfkill handler will care about restarting if needed.
+ */
+ if (hw_rf_kill) {
+ set_bit(S_RFKILL, &il->status);
+ } else {
+ clear_bit(S_RFKILL, &il->status);
+ il_force_reset(il, true);
+ }
+ wiphy_rfkill_set_hw_state(il->hw->wiphy, hw_rf_kill);
+
+ handled |= CSR_INT_BIT_RF_KILL;
+ }
+
+ /* Chip got too hot and stopped itself */
+ if (inta & CSR_INT_BIT_CT_KILL) {
+ IL_ERR("Microcode CT kill error detected.\n");
+ il->isr_stats.ctkill++;
+ handled |= CSR_INT_BIT_CT_KILL;
+ }
+
+ /* Error detected by uCode */
+ if (inta & CSR_INT_BIT_SW_ERR) {
+ IL_ERR("Microcode SW error detected. " " Restarting 0x%X.\n",
+ inta);
+ il->isr_stats.sw++;
+ il_irq_handle_error(il);
+ handled |= CSR_INT_BIT_SW_ERR;
+ }
+
+ /*
+ * uCode wakes up after power-down sleep.
+ * Tell device about any new tx or host commands enqueued,
+ * and about any Rx buffers made available while asleep.
+ */
+ if (inta & CSR_INT_BIT_WAKEUP) {
+ D_ISR("Wakeup interrupt\n");
+ il_rx_queue_update_write_ptr(il, &il->rxq);
+ for (i = 0; i < il->hw_params.max_txq_num; i++)
+ il_txq_update_write_ptr(il, &il->txq[i]);
+ il->isr_stats.wakeup++;
+ handled |= CSR_INT_BIT_WAKEUP;
+ }
+
+ /* All uCode command responses, including Tx command responses,
+ * Rx "responses" (frame-received notification), and other
+ * notifications from uCode come through here*/
+ if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
+ il4965_rx_handle(il);
+ il->isr_stats.rx++;
+ handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
+ }
+
+ /* This "Tx" DMA channel is used only for loading uCode */
+ if (inta & CSR_INT_BIT_FH_TX) {
+ D_ISR("uCode load interrupt\n");
+ il->isr_stats.tx++;
+ handled |= CSR_INT_BIT_FH_TX;
+ /* Wake up uCode load routine, now that load is complete */
+ il->ucode_write_complete = 1;
+ wake_up(&il->wait_command_queue);
+ }
+
+ if (inta & ~handled) {
+ IL_ERR("Unhandled INTA bits 0x%08x\n", inta & ~handled);
+ il->isr_stats.unhandled++;
+ }
+
+ if (inta & ~(il->inta_mask)) {
+ IL_WARN("Disabled INTA bits 0x%08x were pending\n",
+ inta & ~il->inta_mask);
+ IL_WARN(" with FH49_INT = 0x%08x\n", inta_fh);
+ }
+
+ /* Re-enable all interrupts */
+ /* only Re-enable if disabled by irq */
+ if (test_bit(S_INT_ENABLED, &il->status))
+ il_enable_interrupts(il);
+ /* Re-enable RF_KILL if it occurred */
+ else if (handled & CSR_INT_BIT_RF_KILL)
+ il_enable_rfkill_int(il);
+
+#ifdef CONFIG_IWLEGACY_DEBUG
+ if (il_get_debug_level(il) & (IL_DL_ISR)) {
+ inta = _il_rd(il, CSR_INT);
+ inta_mask = _il_rd(il, CSR_INT_MASK);
+ inta_fh = _il_rd(il, CSR_FH_INT_STATUS);
+ D_ISR("End inta 0x%08x, enabled 0x%08x, fh 0x%08x, "
+ "flags 0x%08lx\n", inta, inta_mask, inta_fh, flags);
+ }
+#endif
+}
+
+/*****************************************************************************
+ *
+ * sysfs attributes
+ *
+ *****************************************************************************/
+
+#ifdef CONFIG_IWLEGACY_DEBUG
+
+/*
+ * The following adds a new attribute to the sysfs representation
+ * of this device driver (i.e. a new file in /sys/class/net/wlan0/device/)
+ * used for controlling the debug level.
+ *
+ * See the level definitions in iwl for details.
+ *
+ * The debug_level being managed using sysfs below is a per device debug
+ * level that is used instead of the global debug level if it (the per
+ * device debug level) is set.
+ */
+static ssize_t
+il4965_show_debug_level(struct device *d, struct device_attribute *attr,
+ char *buf)
+{
+ struct il_priv *il = dev_get_drvdata(d);
+ return sprintf(buf, "0x%08X\n", il_get_debug_level(il));
+}
+
+static ssize_t
+il4965_store_debug_level(struct device *d, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct il_priv *il = dev_get_drvdata(d);
+ unsigned long val;
+ int ret;
+
+ ret = kstrtoul(buf, 0, &val);
+ if (ret)
+ IL_ERR("%s is not in hex or decimal form.\n", buf);
+ else
+ il->debug_level = val;
+
+ return strnlen(buf, count);
+}
+
+static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO, il4965_show_debug_level,
+ il4965_store_debug_level);
+
+#endif /* CONFIG_IWLEGACY_DEBUG */
+
+static ssize_t
+il4965_show_temperature(struct device *d, struct device_attribute *attr,
+ char *buf)
+{
+ struct il_priv *il = dev_get_drvdata(d);
+
+ if (!il_is_alive(il))
+ return -EAGAIN;
+
+ return sprintf(buf, "%d\n", il->temperature);
+}
+
+static DEVICE_ATTR(temperature, S_IRUGO, il4965_show_temperature, NULL);
+
+static ssize_t
+il4965_show_tx_power(struct device *d, struct device_attribute *attr, char *buf)
+{
+ struct il_priv *il = dev_get_drvdata(d);
+
+ if (!il_is_ready_rf(il))
+ return sprintf(buf, "off\n");
+ else
+ return sprintf(buf, "%d\n", il->tx_power_user_lmt);
+}
+
+static ssize_t
+il4965_store_tx_power(struct device *d, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct il_priv *il = dev_get_drvdata(d);
+ unsigned long val;
+ int ret;
+
+ ret = kstrtoul(buf, 10, &val);
+ if (ret)
+ IL_INFO("%s is not in decimal form.\n", buf);
+ else {
+ ret = il_set_tx_power(il, val, false);
+ if (ret)
+ IL_ERR("failed setting tx power (0x%08x).\n", ret);
+ else
+ ret = count;
+ }
+ return ret;
+}
+
+static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, il4965_show_tx_power,
+ il4965_store_tx_power);
+
+static struct attribute *il_sysfs_entries[] = {
+ &dev_attr_temperature.attr,
+ &dev_attr_tx_power.attr,
+#ifdef CONFIG_IWLEGACY_DEBUG
+ &dev_attr_debug_level.attr,
+#endif
+ NULL
+};
+
+static struct attribute_group il_attribute_group = {
+ .name = NULL, /* put in device directory */
+ .attrs = il_sysfs_entries,
+};
+
+/******************************************************************************
+ *
+ * uCode download functions
+ *
+ ******************************************************************************/
+
+static void
+il4965_dealloc_ucode_pci(struct il_priv *il)
+{
+ il_free_fw_desc(il->pci_dev, &il->ucode_code);
+ il_free_fw_desc(il->pci_dev, &il->ucode_data);
+ il_free_fw_desc(il->pci_dev, &il->ucode_data_backup);
+ il_free_fw_desc(il->pci_dev, &il->ucode_init);
+ il_free_fw_desc(il->pci_dev, &il->ucode_init_data);
+ il_free_fw_desc(il->pci_dev, &il->ucode_boot);
+}
+
+static void
+il4965_nic_start(struct il_priv *il)
+{
+ /* Remove all resets to allow NIC to operate */
+ _il_wr(il, CSR_RESET, 0);
+}
+
+static void il4965_ucode_callback(const struct firmware *ucode_raw,
+ void *context);
+static int il4965_mac_setup_register(struct il_priv *il, u32 max_probe_length);
+
+static int __must_check
+il4965_request_firmware(struct il_priv *il, bool first)
+{
+ const char *name_pre = il->cfg->fw_name_pre;
+ char tag[8];
+
+ if (first) {
+ il->fw_idx = il->cfg->ucode_api_max;
+ sprintf(tag, "%d", il->fw_idx);
+ } else {
+ il->fw_idx--;
+ sprintf(tag, "%d", il->fw_idx);
+ }
+
+ if (il->fw_idx < il->cfg->ucode_api_min) {
+ IL_ERR("no suitable firmware found!\n");
+ return -ENOENT;
+ }
+
+ sprintf(il->firmware_name, "%s%s%s", name_pre, tag, ".ucode");
+
+ D_INFO("attempting to load firmware '%s'\n", il->firmware_name);
+
+ return request_firmware_nowait(THIS_MODULE, 1, il->firmware_name,
+ &il->pci_dev->dev, GFP_KERNEL, il,
+ il4965_ucode_callback);
+}
+
+struct il4965_firmware_pieces {
+ const void *inst, *data, *init, *init_data, *boot;
+ size_t inst_size, data_size, init_size, init_data_size, boot_size;
+};
+
+static int
+il4965_load_firmware(struct il_priv *il, const struct firmware *ucode_raw,
+ struct il4965_firmware_pieces *pieces)
+{
+ struct il_ucode_header *ucode = (void *)ucode_raw->data;
+ u32 api_ver, hdr_size;
+ const u8 *src;
+
+ il->ucode_ver = le32_to_cpu(ucode->ver);
+ api_ver = IL_UCODE_API(il->ucode_ver);
+
+ switch (api_ver) {
+ default:
+ case 0:
+ case 1:
+ case 2:
+ hdr_size = 24;
+ if (ucode_raw->size < hdr_size) {
+ IL_ERR("File size too small!\n");
+ return -EINVAL;
+ }
+ pieces->inst_size = le32_to_cpu(ucode->v1.inst_size);
+ pieces->data_size = le32_to_cpu(ucode->v1.data_size);
+ pieces->init_size = le32_to_cpu(ucode->v1.init_size);
+ pieces->init_data_size = le32_to_cpu(ucode->v1.init_data_size);
+ pieces->boot_size = le32_to_cpu(ucode->v1.boot_size);
+ src = ucode->v1.data;
+ break;
+ }
+
+ /* Verify size of file vs. image size info in file's header */
+ if (ucode_raw->size !=
+ hdr_size + pieces->inst_size + pieces->data_size +
+ pieces->init_size + pieces->init_data_size + pieces->boot_size) {
+
+ IL_ERR("uCode file size %d does not match expected size\n",
+ (int)ucode_raw->size);
+ return -EINVAL;
+ }
+
+ pieces->inst = src;
+ src += pieces->inst_size;
+ pieces->data = src;
+ src += pieces->data_size;
+ pieces->init = src;
+ src += pieces->init_size;
+ pieces->init_data = src;
+ src += pieces->init_data_size;
+ pieces->boot = src;
+ src += pieces->boot_size;
+
+ return 0;
+}
+
+/**
+ * il4965_ucode_callback - callback when firmware was loaded
+ *
+ * If loaded successfully, copies the firmware into buffers
+ * for the card to fetch (via DMA).
+ */
+static void
+il4965_ucode_callback(const struct firmware *ucode_raw, void *context)
+{
+ struct il_priv *il = context;
+ struct il_ucode_header *ucode;
+ int err;
+ struct il4965_firmware_pieces pieces;
+ const unsigned int api_max = il->cfg->ucode_api_max;
+ const unsigned int api_min = il->cfg->ucode_api_min;
+ u32 api_ver;
+
+ u32 max_probe_length = 200;
+ u32 standard_phy_calibration_size =
+ IL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE;
+
+ memset(&pieces, 0, sizeof(pieces));
+
+ if (!ucode_raw) {
+ if (il->fw_idx <= il->cfg->ucode_api_max)
+ IL_ERR("request for firmware file '%s' failed.\n",
+ il->firmware_name);
+ goto try_again;
+ }
+
+ D_INFO("Loaded firmware file '%s' (%zd bytes).\n", il->firmware_name,
+ ucode_raw->size);
+
+ /* Make sure that we got at least the API version number */
+ if (ucode_raw->size < 4) {
+ IL_ERR("File size way too small!\n");
+ goto try_again;
+ }
+
+ /* Data from ucode file: header followed by uCode images */
+ ucode = (struct il_ucode_header *)ucode_raw->data;
+
+ err = il4965_load_firmware(il, ucode_raw, &pieces);
+
+ if (err)
+ goto try_again;
+
+ api_ver = IL_UCODE_API(il->ucode_ver);
+
+ /*
+ * api_ver should match the api version forming part of the
+ * firmware filename ... but we don't check for that and only rely
+ * on the API version read from firmware header from here on forward
+ */
+ if (api_ver < api_min || api_ver > api_max) {
+ IL_ERR("Driver unable to support your firmware API. "
+ "Driver supports v%u, firmware is v%u.\n", api_max,
+ api_ver);
+ goto try_again;
+ }
+
+ if (api_ver != api_max)
+ IL_ERR("Firmware has old API version. Expected v%u, "
+ "got v%u. New firmware can be obtained "
+ "from http://www.intellinuxwireless.org.\n", api_max,
+ api_ver);
+
+ IL_INFO("loaded firmware version %u.%u.%u.%u\n",
+ IL_UCODE_MAJOR(il->ucode_ver), IL_UCODE_MINOR(il->ucode_ver),
+ IL_UCODE_API(il->ucode_ver), IL_UCODE_SERIAL(il->ucode_ver));
+
+ snprintf(il->hw->wiphy->fw_version, sizeof(il->hw->wiphy->fw_version),
+ "%u.%u.%u.%u", IL_UCODE_MAJOR(il->ucode_ver),
+ IL_UCODE_MINOR(il->ucode_ver), IL_UCODE_API(il->ucode_ver),
+ IL_UCODE_SERIAL(il->ucode_ver));
+
+ /*
+ * For any of the failures below (before allocating pci memory)
+ * we will try to load a version with a smaller API -- maybe the
+ * user just got a corrupted version of the latest API.
+ */
+
+ D_INFO("f/w package hdr ucode version raw = 0x%x\n", il->ucode_ver);
+ D_INFO("f/w package hdr runtime inst size = %Zd\n", pieces.inst_size);
+ D_INFO("f/w package hdr runtime data size = %Zd\n", pieces.data_size);
+ D_INFO("f/w package hdr init inst size = %Zd\n", pieces.init_size);
+ D_INFO("f/w package hdr init data size = %Zd\n", pieces.init_data_size);
+ D_INFO("f/w package hdr boot inst size = %Zd\n", pieces.boot_size);
+
+ /* Verify that uCode images will fit in card's SRAM */
+ if (pieces.inst_size > il->hw_params.max_inst_size) {
+ IL_ERR("uCode instr len %Zd too large to fit in\n",
+ pieces.inst_size);
+ goto try_again;
+ }
+
+ if (pieces.data_size > il->hw_params.max_data_size) {
+ IL_ERR("uCode data len %Zd too large to fit in\n",
+ pieces.data_size);
+ goto try_again;
+ }
+
+ if (pieces.init_size > il->hw_params.max_inst_size) {
+ IL_ERR("uCode init instr len %Zd too large to fit in\n",
+ pieces.init_size);
+ goto try_again;
+ }
+
+ if (pieces.init_data_size > il->hw_params.max_data_size) {
+ IL_ERR("uCode init data len %Zd too large to fit in\n",
+ pieces.init_data_size);
+ goto try_again;
+ }
+
+ if (pieces.boot_size > il->hw_params.max_bsm_size) {
+ IL_ERR("uCode boot instr len %Zd too large to fit in\n",
+ pieces.boot_size);
+ goto try_again;
+ }
+
+ /* Allocate ucode buffers for card's bus-master loading ... */
+
+ /* Runtime instructions and 2 copies of data:
+ * 1) unmodified from disk
+ * 2) backup cache for save/restore during power-downs */
+ il->ucode_code.len = pieces.inst_size;
+ il_alloc_fw_desc(il->pci_dev, &il->ucode_code);
+
+ il->ucode_data.len = pieces.data_size;
+ il_alloc_fw_desc(il->pci_dev, &il->ucode_data);
+
+ il->ucode_data_backup.len = pieces.data_size;
+ il_alloc_fw_desc(il->pci_dev, &il->ucode_data_backup);
+
+ if (!il->ucode_code.v_addr || !il->ucode_data.v_addr ||
+ !il->ucode_data_backup.v_addr)
+ goto err_pci_alloc;
+
+ /* Initialization instructions and data */
+ if (pieces.init_size && pieces.init_data_size) {
+ il->ucode_init.len = pieces.init_size;
+ il_alloc_fw_desc(il->pci_dev, &il->ucode_init);
+
+ il->ucode_init_data.len = pieces.init_data_size;
+ il_alloc_fw_desc(il->pci_dev, &il->ucode_init_data);
+
+ if (!il->ucode_init.v_addr || !il->ucode_init_data.v_addr)
+ goto err_pci_alloc;
+ }
+
+ /* Bootstrap (instructions only, no data) */
+ if (pieces.boot_size) {
+ il->ucode_boot.len = pieces.boot_size;
+ il_alloc_fw_desc(il->pci_dev, &il->ucode_boot);
+
+ if (!il->ucode_boot.v_addr)
+ goto err_pci_alloc;
+ }
+
+ /* Now that we can no longer fail, copy information */
+
+ il->sta_key_max_num = STA_KEY_MAX_NUM;
+
+ /* Copy images into buffers for card's bus-master reads ... */
+
+ /* Runtime instructions (first block of data in file) */
+ D_INFO("Copying (but not loading) uCode instr len %Zd\n",
+ pieces.inst_size);
+ memcpy(il->ucode_code.v_addr, pieces.inst, pieces.inst_size);
+
+ D_INFO("uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n",
+ il->ucode_code.v_addr, (u32) il->ucode_code.p_addr);
+
+ /*
+ * Runtime data
+ * NOTE: Copy into backup buffer will be done in il_up()
+ */
+ D_INFO("Copying (but not loading) uCode data len %Zd\n",
+ pieces.data_size);
+ memcpy(il->ucode_data.v_addr, pieces.data, pieces.data_size);
+ memcpy(il->ucode_data_backup.v_addr, pieces.data, pieces.data_size);
+
+ /* Initialization instructions */
+ if (pieces.init_size) {
+ D_INFO("Copying (but not loading) init instr len %Zd\n",
+ pieces.init_size);
+ memcpy(il->ucode_init.v_addr, pieces.init, pieces.init_size);
+ }
+
+ /* Initialization data */
+ if (pieces.init_data_size) {
+ D_INFO("Copying (but not loading) init data len %Zd\n",
+ pieces.init_data_size);
+ memcpy(il->ucode_init_data.v_addr, pieces.init_data,
+ pieces.init_data_size);
+ }
+
+ /* Bootstrap instructions */
+ D_INFO("Copying (but not loading) boot instr len %Zd\n",
+ pieces.boot_size);
+ memcpy(il->ucode_boot.v_addr, pieces.boot, pieces.boot_size);
+
+ /*
+ * figure out the offset of chain noise reset and gain commands
+ * base on the size of standard phy calibration commands table size
+ */
+ il->_4965.phy_calib_chain_noise_reset_cmd =
+ standard_phy_calibration_size;
+ il->_4965.phy_calib_chain_noise_gain_cmd =
+ standard_phy_calibration_size + 1;
+
+ /**************************************************
+ * This is still part of probe() in a sense...
+ *
+ * 9. Setup and register with mac80211 and debugfs
+ **************************************************/
+ err = il4965_mac_setup_register(il, max_probe_length);
+ if (err)
+ goto out_unbind;
+
+ err = il_dbgfs_register(il, DRV_NAME);
+ if (err)
+ IL_ERR("failed to create debugfs files. Ignoring error: %d\n",
+ err);
+
+ err = sysfs_create_group(&il->pci_dev->dev.kobj, &il_attribute_group);
+ if (err) {
+ IL_ERR("failed to create sysfs device attributes\n");
+ goto out_unbind;
+ }
+
+ /* We have our copies now, allow OS release its copies */
+ release_firmware(ucode_raw);
+ complete(&il->_4965.firmware_loading_complete);
+ return;
+
+try_again:
+ /* try next, if any */
+ if (il4965_request_firmware(il, false))
+ goto out_unbind;
+ release_firmware(ucode_raw);
+ return;
+
+err_pci_alloc:
+ IL_ERR("failed to allocate pci memory\n");
+ il4965_dealloc_ucode_pci(il);
+out_unbind:
+ complete(&il->_4965.firmware_loading_complete);
+ device_release_driver(&il->pci_dev->dev);
+ release_firmware(ucode_raw);
+}
+
+static const char *const desc_lookup_text[] = {
+ "OK",
+ "FAIL",
+ "BAD_PARAM",
+ "BAD_CHECKSUM",
+ "NMI_INTERRUPT_WDG",
+ "SYSASSERT",
+ "FATAL_ERROR",
+ "BAD_COMMAND",
+ "HW_ERROR_TUNE_LOCK",
+ "HW_ERROR_TEMPERATURE",
+ "ILLEGAL_CHAN_FREQ",
+ "VCC_NOT_STBL",
+ "FH49_ERROR",
+ "NMI_INTERRUPT_HOST",
+ "NMI_INTERRUPT_ACTION_PT",
+ "NMI_INTERRUPT_UNKNOWN",
+ "UCODE_VERSION_MISMATCH",
+ "HW_ERROR_ABS_LOCK",
+ "HW_ERROR_CAL_LOCK_FAIL",
+ "NMI_INTERRUPT_INST_ACTION_PT",
+ "NMI_INTERRUPT_DATA_ACTION_PT",
+ "NMI_TRM_HW_ER",
+ "NMI_INTERRUPT_TRM",
+ "NMI_INTERRUPT_BREAK_POINT",
+ "DEBUG_0",
+ "DEBUG_1",
+ "DEBUG_2",
+ "DEBUG_3",
+};
+
+static struct {
+ char *name;
+ u8 num;
+} advanced_lookup[] = {
+ {
+ "NMI_INTERRUPT_WDG", 0x34}, {
+ "SYSASSERT", 0x35}, {
+ "UCODE_VERSION_MISMATCH", 0x37}, {
+ "BAD_COMMAND", 0x38}, {
+ "NMI_INTERRUPT_DATA_ACTION_PT", 0x3C}, {
+ "FATAL_ERROR", 0x3D}, {
+ "NMI_TRM_HW_ERR", 0x46}, {
+ "NMI_INTERRUPT_TRM", 0x4C}, {
+ "NMI_INTERRUPT_BREAK_POINT", 0x54}, {
+ "NMI_INTERRUPT_WDG_RXF_FULL", 0x5C}, {
+ "NMI_INTERRUPT_WDG_NO_RBD_RXF_FULL", 0x64}, {
+ "NMI_INTERRUPT_HOST", 0x66}, {
+ "NMI_INTERRUPT_ACTION_PT", 0x7C}, {
+ "NMI_INTERRUPT_UNKNOWN", 0x84}, {
+ "NMI_INTERRUPT_INST_ACTION_PT", 0x86}, {
+"ADVANCED_SYSASSERT", 0},};
+
+static const char *
+il4965_desc_lookup(u32 num)
+{
+ int i;
+ int max = ARRAY_SIZE(desc_lookup_text);
+
+ if (num < max)
+ return desc_lookup_text[num];
+
+ max = ARRAY_SIZE(advanced_lookup) - 1;
+ for (i = 0; i < max; i++) {
+ if (advanced_lookup[i].num == num)
+ break;
+ }
+ return advanced_lookup[i].name;
+}
+
+#define ERROR_START_OFFSET (1 * sizeof(u32))
+#define ERROR_ELEM_SIZE (7 * sizeof(u32))
+
+void
+il4965_dump_nic_error_log(struct il_priv *il)
+{
+ u32 data2, line;
+ u32 desc, time, count, base, data1;
+ u32 blink1, blink2, ilink1, ilink2;
+ u32 pc, hcmd;
+
+ if (il->ucode_type == UCODE_INIT)
+ base = le32_to_cpu(il->card_alive_init.error_event_table_ptr);
+ else
+ base = le32_to_cpu(il->card_alive.error_event_table_ptr);
+
+ if (!il->ops->is_valid_rtc_data_addr(base)) {
+ IL_ERR("Not valid error log pointer 0x%08X for %s uCode\n",
+ base, (il->ucode_type == UCODE_INIT) ? "Init" : "RT");
+ return;
+ }
+
+ count = il_read_targ_mem(il, base);
+
+ if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) {
+ IL_ERR("Start IWL Error Log Dump:\n");
+ IL_ERR("Status: 0x%08lX, count: %d\n", il->status, count);
+ }
+
+ desc = il_read_targ_mem(il, base + 1 * sizeof(u32));
+ il->isr_stats.err_code = desc;
+ pc = il_read_targ_mem(il, base + 2 * sizeof(u32));
+ blink1 = il_read_targ_mem(il, base + 3 * sizeof(u32));
+ blink2 = il_read_targ_mem(il, base + 4 * sizeof(u32));
+ ilink1 = il_read_targ_mem(il, base + 5 * sizeof(u32));
+ ilink2 = il_read_targ_mem(il, base + 6 * sizeof(u32));
+ data1 = il_read_targ_mem(il, base + 7 * sizeof(u32));
+ data2 = il_read_targ_mem(il, base + 8 * sizeof(u32));
+ line = il_read_targ_mem(il, base + 9 * sizeof(u32));
+ time = il_read_targ_mem(il, base + 11 * sizeof(u32));
+ hcmd = il_read_targ_mem(il, base + 22 * sizeof(u32));
+
+ IL_ERR("Desc Time "
+ "data1 data2 line\n");
+ IL_ERR("%-28s (0x%04X) %010u 0x%08X 0x%08X %u\n",
+ il4965_desc_lookup(desc), desc, time, data1, data2, line);
+ IL_ERR("pc blink1 blink2 ilink1 ilink2 hcmd\n");
+ IL_ERR("0x%05X 0x%05X 0x%05X 0x%05X 0x%05X 0x%05X\n", pc, blink1,
+ blink2, ilink1, ilink2, hcmd);
+}
+
+static void
+il4965_rf_kill_ct_config(struct il_priv *il)
+{
+ struct il_ct_kill_config cmd;
+ unsigned long flags;
+ int ret = 0;
+
+ spin_lock_irqsave(&il->lock, flags);
+ _il_wr(il, CSR_UCODE_DRV_GP1_CLR,
+ CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT);
+ spin_unlock_irqrestore(&il->lock, flags);
+
+ cmd.critical_temperature_R =
+ cpu_to_le32(il->hw_params.ct_kill_threshold);
+
+ ret = il_send_cmd_pdu(il, C_CT_KILL_CONFIG, sizeof(cmd), &cmd);
+ if (ret)
+ IL_ERR("C_CT_KILL_CONFIG failed\n");
+ else
+ D_INFO("C_CT_KILL_CONFIG " "succeeded, "
+ "critical temperature is %d\n",
+ il->hw_params.ct_kill_threshold);
+}
+
+static const s8 default_queue_to_tx_fifo[] = {
+ IL_TX_FIFO_VO,
+ IL_TX_FIFO_VI,
+ IL_TX_FIFO_BE,
+ IL_TX_FIFO_BK,
+ IL49_CMD_FIFO_NUM,
+ IL_TX_FIFO_UNUSED,
+ IL_TX_FIFO_UNUSED,
+};
+
+#define IL_MASK(lo, hi) ((1 << (hi)) | ((1 << (hi)) - (1 << (lo))))
+
+static int
+il4965_alive_notify(struct il_priv *il)
+{
+ u32 a;
+ unsigned long flags;
+ int i, chan;
+ u32 reg_val;
+
+ spin_lock_irqsave(&il->lock, flags);
+
+ /* Clear 4965's internal Tx Scheduler data base */
+ il->scd_base_addr = il_rd_prph(il, IL49_SCD_SRAM_BASE_ADDR);
+ a = il->scd_base_addr + IL49_SCD_CONTEXT_DATA_OFFSET;
+ for (; a < il->scd_base_addr + IL49_SCD_TX_STTS_BITMAP_OFFSET; a += 4)
+ il_write_targ_mem(il, a, 0);
+ for (; a < il->scd_base_addr + IL49_SCD_TRANSLATE_TBL_OFFSET; a += 4)
+ il_write_targ_mem(il, a, 0);
+ for (;
+ a <
+ il->scd_base_addr +
+ IL49_SCD_TRANSLATE_TBL_OFFSET_QUEUE(il->hw_params.max_txq_num);
+ a += 4)
+ il_write_targ_mem(il, a, 0);
+
+ /* Tel 4965 where to find Tx byte count tables */
+ il_wr_prph(il, IL49_SCD_DRAM_BASE_ADDR, il->scd_bc_tbls.dma >> 10);
+
+ /* Enable DMA channel */
+ for (chan = 0; chan < FH49_TCSR_CHNL_NUM; chan++)
+ il_wr(il, FH49_TCSR_CHNL_TX_CONFIG_REG(chan),
+ FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE |
+ FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE);
+
+ /* Update FH chicken bits */
+ reg_val = il_rd(il, FH49_TX_CHICKEN_BITS_REG);
+ il_wr(il, FH49_TX_CHICKEN_BITS_REG,
+ reg_val | FH49_TX_CHICKEN_BITS_SCD_AUTO_RETRY_EN);
+
+ /* Disable chain mode for all queues */
+ il_wr_prph(il, IL49_SCD_QUEUECHAIN_SEL, 0);
+
+ /* Initialize each Tx queue (including the command queue) */
+ for (i = 0; i < il->hw_params.max_txq_num; i++) {
+
+ /* TFD circular buffer read/write idxes */
+ il_wr_prph(il, IL49_SCD_QUEUE_RDPTR(i), 0);
+ il_wr(il, HBUS_TARG_WRPTR, 0 | (i << 8));
+
+ /* Max Tx Window size for Scheduler-ACK mode */
+ il_write_targ_mem(il,
+ il->scd_base_addr +
+ IL49_SCD_CONTEXT_QUEUE_OFFSET(i),
+ (SCD_WIN_SIZE <<
+ IL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS) &
+ IL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK);
+
+ /* Frame limit */
+ il_write_targ_mem(il,
+ il->scd_base_addr +
+ IL49_SCD_CONTEXT_QUEUE_OFFSET(i) +
+ sizeof(u32),
+ (SCD_FRAME_LIMIT <<
+ IL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) &
+ IL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK);
+
+ }
+ il_wr_prph(il, IL49_SCD_INTERRUPT_MASK,
+ (1 << il->hw_params.max_txq_num) - 1);
+
+ /* Activate all Tx DMA/FIFO channels */
+ il4965_txq_set_sched(il, IL_MASK(0, 6));
+
+ il4965_set_wr_ptrs(il, IL_DEFAULT_CMD_QUEUE_NUM, 0);
+
+ /* make sure all queue are not stopped */
+ memset(&il->queue_stopped[0], 0, sizeof(il->queue_stopped));
+ for (i = 0; i < 4; i++)
+ atomic_set(&il->queue_stop_count[i], 0);
+
+ /* reset to 0 to enable all the queue first */
+ il->txq_ctx_active_msk = 0;
+ /* Map each Tx/cmd queue to its corresponding fifo */
+ BUILD_BUG_ON(ARRAY_SIZE(default_queue_to_tx_fifo) != 7);
+
+ for (i = 0; i < ARRAY_SIZE(default_queue_to_tx_fifo); i++) {
+ int ac = default_queue_to_tx_fifo[i];
+
+ il_txq_ctx_activate(il, i);
+
+ if (ac == IL_TX_FIFO_UNUSED)
+ continue;
+
+ il4965_tx_queue_set_status(il, &il->txq[i], ac, 0);
+ }
+
+ spin_unlock_irqrestore(&il->lock, flags);
+
+ return 0;
+}
+
+/**
+ * il4965_alive_start - called after N_ALIVE notification received
+ * from protocol/runtime uCode (initialization uCode's
+ * Alive gets handled by il_init_alive_start()).
+ */
+static void
+il4965_alive_start(struct il_priv *il)
+{
+ int ret = 0;
+
+ D_INFO("Runtime Alive received.\n");
+
+ if (il->card_alive.is_valid != UCODE_VALID_OK) {
+ /* We had an error bringing up the hardware, so take it
+ * all the way back down so we can try again */
+ D_INFO("Alive failed.\n");
+ goto restart;
+ }
+
+ /* Initialize uCode has loaded Runtime uCode ... verify inst image.
+ * This is a paranoid check, because we would not have gotten the
+ * "runtime" alive if code weren't properly loaded. */
+ if (il4965_verify_ucode(il)) {
+ /* Runtime instruction load was bad;
+ * take it all the way back down so we can try again */
+ D_INFO("Bad runtime uCode load.\n");
+ goto restart;
+ }
+
+ ret = il4965_alive_notify(il);
+ if (ret) {
+ IL_WARN("Could not complete ALIVE transition [ntf]: %d\n", ret);
+ goto restart;
+ }
+
+ /* After the ALIVE response, we can send host commands to the uCode */
+ set_bit(S_ALIVE, &il->status);
+
+ /* Enable watchdog to monitor the driver tx queues */
+ il_setup_watchdog(il);
+
+ if (il_is_rfkill(il))
+ return;
+
+ ieee80211_wake_queues(il->hw);
+
+ il->active_rate = RATES_MASK;
+
+ il_power_update_mode(il, true);
+ D_INFO("Updated power mode\n");
+
+ if (il_is_associated(il)) {
+ struct il_rxon_cmd *active_rxon =
+ (struct il_rxon_cmd *)&il->active;
+ /* apply any changes in staging */
+ il->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
+ active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+ } else {
+ /* Initialize our rx_config data */
+ il_connection_init_rx_config(il);
+
+ if (il->ops->set_rxon_chain)
+ il->ops->set_rxon_chain(il);
+ }
+
+ /* Configure bluetooth coexistence if enabled */
+ il_send_bt_config(il);
+
+ il4965_reset_run_time_calib(il);
+
+ set_bit(S_READY, &il->status);
+
+ /* Configure the adapter for unassociated operation */
+ il_commit_rxon(il);
+
+ /* At this point, the NIC is initialized and operational */
+ il4965_rf_kill_ct_config(il);
+
+ D_INFO("ALIVE processing complete.\n");
+ wake_up(&il->wait_command_queue);
+
+ return;
+
+restart:
+ queue_work(il->workqueue, &il->restart);
+}
+
+static void il4965_cancel_deferred_work(struct il_priv *il);
+
+static void
+__il4965_down(struct il_priv *il)
+{
+ unsigned long flags;
+ int exit_pending;
+
+ D_INFO(DRV_NAME " is going down\n");
+
+ il_scan_cancel_timeout(il, 200);
+
+ exit_pending = test_and_set_bit(S_EXIT_PENDING, &il->status);
+
+ /* Stop TX queues watchdog. We need to have S_EXIT_PENDING bit set
+ * to prevent rearm timer */
+ del_timer_sync(&il->watchdog);
+
+ il_clear_ucode_stations(il);
+
+ /* FIXME: race conditions ? */
+ spin_lock_irq(&il->sta_lock);
+ /*
+ * Remove all key information that is not stored as part
+ * of station information since mac80211 may not have had
+ * a chance to remove all the keys. When device is
+ * reconfigured by mac80211 after an error all keys will
+ * be reconfigured.
+ */
+ memset(il->_4965.wep_keys, 0, sizeof(il->_4965.wep_keys));
+ il->_4965.key_mapping_keys = 0;
+ spin_unlock_irq(&il->sta_lock);
+
+ il_dealloc_bcast_stations(il);
+ il_clear_driver_stations(il);
+
+ /* Unblock any waiting calls */
+ wake_up_all(&il->wait_command_queue);
+
+ /* Wipe out the EXIT_PENDING status bit if we are not actually
+ * exiting the module */
+ if (!exit_pending)
+ clear_bit(S_EXIT_PENDING, &il->status);
+
+ /* stop and reset the on-board processor */
+ _il_wr(il, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
+
+ /* tell the device to stop sending interrupts */
+ spin_lock_irqsave(&il->lock, flags);
+ il_disable_interrupts(il);
+ spin_unlock_irqrestore(&il->lock, flags);
+ il4965_synchronize_irq(il);
+
+ if (il->mac80211_registered)
+ ieee80211_stop_queues(il->hw);
+
+ /* If we have not previously called il_init() then
+ * clear all bits but the RF Kill bit and return */
+ if (!il_is_init(il)) {
+ il->status =
+ test_bit(S_RFKILL, &il->status) << S_RFKILL |
+ test_bit(S_GEO_CONFIGURED, &il->status) << S_GEO_CONFIGURED |
+ test_bit(S_EXIT_PENDING, &il->status) << S_EXIT_PENDING;
+ goto exit;
+ }
+
+ /* ...otherwise clear out all the status bits but the RF Kill
+ * bit and continue taking the NIC down. */
+ il->status &=
+ test_bit(S_RFKILL, &il->status) << S_RFKILL |
+ test_bit(S_GEO_CONFIGURED, &il->status) << S_GEO_CONFIGURED |
+ test_bit(S_FW_ERROR, &il->status) << S_FW_ERROR |
+ test_bit(S_EXIT_PENDING, &il->status) << S_EXIT_PENDING;
+
+ /*
+ * We disabled and synchronized interrupt, and priv->mutex is taken, so
+ * here is the only thread which will program device registers, but
+ * still have lockdep assertions, so we are taking reg_lock.
+ */
+ spin_lock_irq(&il->reg_lock);
+ /* FIXME: il_grab_nic_access if rfkill is off ? */
+
+ il4965_txq_ctx_stop(il);
+ il4965_rxq_stop(il);
+ /* Power-down device's busmaster DMA clocks */
+ _il_wr_prph(il, APMG_CLK_DIS_REG, APMG_CLK_VAL_DMA_CLK_RQT);
+ udelay(5);
+ /* Make sure (redundant) we've released our request to stay awake */
+ _il_clear_bit(il, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
+ /* Stop the device, and put it in low power state */
+ _il_apm_stop(il);
+
+ spin_unlock_irq(&il->reg_lock);
+
+ il4965_txq_ctx_unmap(il);
+exit:
+ memset(&il->card_alive, 0, sizeof(struct il_alive_resp));
+
+ dev_kfree_skb(il->beacon_skb);
+ il->beacon_skb = NULL;
+
+ /* clear out any free frames */
+ il4965_clear_free_frames(il);
+}
+
+static void
+il4965_down(struct il_priv *il)
+{
+ mutex_lock(&il->mutex);
+ __il4965_down(il);
+ mutex_unlock(&il->mutex);
+
+ il4965_cancel_deferred_work(il);
+}
+
+
+static void
+il4965_set_hw_ready(struct il_priv *il)
+{
+ int ret;
+
+ il_set_bit(il, CSR_HW_IF_CONFIG_REG,
+ CSR_HW_IF_CONFIG_REG_BIT_NIC_READY);
+
+ /* See if we got it */
+ ret = _il_poll_bit(il, CSR_HW_IF_CONFIG_REG,
+ CSR_HW_IF_CONFIG_REG_BIT_NIC_READY,
+ CSR_HW_IF_CONFIG_REG_BIT_NIC_READY,
+ 100);
+ if (ret >= 0)
+ il->hw_ready = true;
+
+ D_INFO("hardware %s ready\n", (il->hw_ready) ? "" : "not");
+}
+
+static void
+il4965_prepare_card_hw(struct il_priv *il)
+{
+ int ret;
+
+ il->hw_ready = false;
+
+ il4965_set_hw_ready(il);
+ if (il->hw_ready)
+ return;
+
+ /* If HW is not ready, prepare the conditions to check again */
+ il_set_bit(il, CSR_HW_IF_CONFIG_REG, CSR_HW_IF_CONFIG_REG_PREPARE);
+
+ ret =
+ _il_poll_bit(il, CSR_HW_IF_CONFIG_REG,
+ ~CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE,
+ CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE, 150000);
+
+ /* HW should be ready by now, check again. */
+ if (ret != -ETIMEDOUT)
+ il4965_set_hw_ready(il);
+}
+
+#define MAX_HW_RESTARTS 5
+
+static int
+__il4965_up(struct il_priv *il)
+{
+ int i;
+ int ret;
+
+ if (test_bit(S_EXIT_PENDING, &il->status)) {
+ IL_WARN("Exit pending; will not bring the NIC up\n");
+ return -EIO;
+ }
+
+ if (!il->ucode_data_backup.v_addr || !il->ucode_data.v_addr) {
+ IL_ERR("ucode not available for device bringup\n");
+ return -EIO;
+ }
+
+ ret = il4965_alloc_bcast_station(il);
+ if (ret) {
+ il_dealloc_bcast_stations(il);
+ return ret;
+ }
+
+ il4965_prepare_card_hw(il);
+ if (!il->hw_ready) {
+ IL_ERR("HW not ready\n");
+ return -EIO;
+ }
+
+ /* If platform's RF_KILL switch is NOT set to KILL */
+ if (_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
+ clear_bit(S_RFKILL, &il->status);
+ else {
+ set_bit(S_RFKILL, &il->status);
+ wiphy_rfkill_set_hw_state(il->hw->wiphy, true);
+
+ il_enable_rfkill_int(il);
+ IL_WARN("Radio disabled by HW RF Kill switch\n");
+ return 0;
+ }
+
+ _il_wr(il, CSR_INT, 0xFFFFFFFF);
+
+ /* must be initialised before il_hw_nic_init */
+ il->cmd_queue = IL_DEFAULT_CMD_QUEUE_NUM;
+
+ ret = il4965_hw_nic_init(il);
+ if (ret) {
+ IL_ERR("Unable to init nic\n");
+ return ret;
+ }
+
+ /* make sure rfkill handshake bits are cleared */
+ _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
+ _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
+
+ /* clear (again), then enable host interrupts */
+ _il_wr(il, CSR_INT, 0xFFFFFFFF);
+ il_enable_interrupts(il);
+
+ /* really make sure rfkill handshake bits are cleared */
+ _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
+ _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
+
+ /* Copy original ucode data image from disk into backup cache.
+ * This will be used to initialize the on-board processor's
+ * data SRAM for a clean start when the runtime program first loads. */
+ memcpy(il->ucode_data_backup.v_addr, il->ucode_data.v_addr,
+ il->ucode_data.len);
+
+ for (i = 0; i < MAX_HW_RESTARTS; i++) {
+
+ /* load bootstrap state machine,
+ * load bootstrap program into processor's memory,
+ * prepare to load the "initialize" uCode */
+ ret = il->ops->load_ucode(il);
+
+ if (ret) {
+ IL_ERR("Unable to set up bootstrap uCode: %d\n", ret);
+ continue;
+ }
+
+ /* start card; "initialize" will load runtime ucode */
+ il4965_nic_start(il);
+
+ D_INFO(DRV_NAME " is coming up\n");
+
+ return 0;
+ }
+
+ set_bit(S_EXIT_PENDING, &il->status);
+ __il4965_down(il);
+ clear_bit(S_EXIT_PENDING, &il->status);
+
+ /* tried to restart and config the device for as long as our
+ * patience could withstand */
+ IL_ERR("Unable to initialize device after %d attempts.\n", i);
+ return -EIO;
+}
+
+/*****************************************************************************
+ *
+ * Workqueue callbacks
+ *
+ *****************************************************************************/
+
+static void
+il4965_bg_init_alive_start(struct work_struct *data)
+{
+ struct il_priv *il =
+ container_of(data, struct il_priv, init_alive_start.work);
+
+ mutex_lock(&il->mutex);
+ if (test_bit(S_EXIT_PENDING, &il->status))
+ goto out;
+
+ il->ops->init_alive_start(il);
+out:
+ mutex_unlock(&il->mutex);
+}
+
+static void
+il4965_bg_alive_start(struct work_struct *data)
+{
+ struct il_priv *il =
+ container_of(data, struct il_priv, alive_start.work);
+
+ mutex_lock(&il->mutex);
+ if (test_bit(S_EXIT_PENDING, &il->status))
+ goto out;
+
+ il4965_alive_start(il);
+out:
+ mutex_unlock(&il->mutex);
+}
+
+static void
+il4965_bg_run_time_calib_work(struct work_struct *work)
+{
+ struct il_priv *il = container_of(work, struct il_priv,
+ run_time_calib_work);
+
+ mutex_lock(&il->mutex);
+
+ if (test_bit(S_EXIT_PENDING, &il->status) ||
+ test_bit(S_SCANNING, &il->status)) {
+ mutex_unlock(&il->mutex);
+ return;
+ }
+
+ if (il->start_calib) {
+ il4965_chain_noise_calibration(il, (void *)&il->_4965.stats);
+ il4965_sensitivity_calibration(il, (void *)&il->_4965.stats);
+ }
+
+ mutex_unlock(&il->mutex);
+}
+
+static void
+il4965_bg_restart(struct work_struct *data)
+{
+ struct il_priv *il = container_of(data, struct il_priv, restart);
+
+ if (test_bit(S_EXIT_PENDING, &il->status))
+ return;
+
+ if (test_and_clear_bit(S_FW_ERROR, &il->status)) {
+ mutex_lock(&il->mutex);
+ il->is_open = 0;
+
+ __il4965_down(il);
+
+ mutex_unlock(&il->mutex);
+ il4965_cancel_deferred_work(il);
+ ieee80211_restart_hw(il->hw);
+ } else {
+ il4965_down(il);
+
+ mutex_lock(&il->mutex);
+ if (test_bit(S_EXIT_PENDING, &il->status)) {
+ mutex_unlock(&il->mutex);
+ return;
+ }
+
+ __il4965_up(il);
+ mutex_unlock(&il->mutex);
+ }
+}
+
+static void
+il4965_bg_rx_replenish(struct work_struct *data)
+{
+ struct il_priv *il = container_of(data, struct il_priv, rx_replenish);
+
+ if (test_bit(S_EXIT_PENDING, &il->status))
+ return;
+
+ mutex_lock(&il->mutex);
+ il4965_rx_replenish(il);
+ mutex_unlock(&il->mutex);
+}
+
+/*****************************************************************************
+ *
+ * mac80211 entry point functions
+ *
+ *****************************************************************************/
+
+#define UCODE_READY_TIMEOUT (4 * HZ)
+
+/*
+ * Not a mac80211 entry point function, but it fits in with all the
+ * other mac80211 functions grouped here.
+ */
+static int
+il4965_mac_setup_register(struct il_priv *il, u32 max_probe_length)
+{
+ int ret;
+ struct ieee80211_hw *hw = il->hw;
+
+ hw->rate_control_algorithm = "iwl-4965-rs";
+
+ /* Tell mac80211 our characteristics */
+ hw->flags =
+ IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_AMPDU_AGGREGATION |
+ IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC | IEEE80211_HW_SPECTRUM_MGMT |
+ IEEE80211_HW_REPORTS_TX_ACK_STATUS | IEEE80211_HW_SUPPORTS_PS |
+ IEEE80211_HW_SUPPORTS_DYNAMIC_PS;
+ if (il->cfg->sku & IL_SKU_N)
+ hw->wiphy->features |= NL80211_FEATURE_DYNAMIC_SMPS |
+ NL80211_FEATURE_STATIC_SMPS;
+
+ hw->sta_data_size = sizeof(struct il_station_priv);
+ hw->vif_data_size = sizeof(struct il_vif_priv);
+
+ hw->wiphy->interface_modes =
+ BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_ADHOC);
+
+ hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
+ hw->wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG |
+ REGULATORY_DISABLE_BEACON_HINTS;
+
+ /*
+ * For now, disable PS by default because it affects
+ * RX performance significantly.
+ */
+ hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
+
+ hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX;
+ /* we create the 802.11 header and a zero-length SSID element */
+ hw->wiphy->max_scan_ie_len = max_probe_length - 24 - 2;
+
+ /* Default value; 4 EDCA QOS priorities */
+ hw->queues = 4;
+
+ hw->max_listen_interval = IL_CONN_MAX_LISTEN_INTERVAL;
+
+ if (il->bands[IEEE80211_BAND_2GHZ].n_channels)
+ il->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
+ &il->bands[IEEE80211_BAND_2GHZ];
+ if (il->bands[IEEE80211_BAND_5GHZ].n_channels)
+ il->hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
+ &il->bands[IEEE80211_BAND_5GHZ];
+
+ il_leds_init(il);
+
+ ret = ieee80211_register_hw(il->hw);
+ if (ret) {
+ IL_ERR("Failed to register hw (error %d)\n", ret);
+ return ret;
+ }
+ il->mac80211_registered = 1;
+
+ return 0;
+}
+
+int
+il4965_mac_start(struct ieee80211_hw *hw)
+{
+ struct il_priv *il = hw->priv;
+ int ret;
+
+ D_MAC80211("enter\n");
+
+ /* we should be verifying the device is ready to be opened */
+ mutex_lock(&il->mutex);
+ ret = __il4965_up(il);
+ mutex_unlock(&il->mutex);
+
+ if (ret)
+ return ret;
+
+ if (il_is_rfkill(il))
+ goto out;
+
+ D_INFO("Start UP work done.\n");
+
+ /* Wait for START_ALIVE from Run Time ucode. Otherwise callbacks from
+ * mac80211 will not be run successfully. */
+ ret = wait_event_timeout(il->wait_command_queue,
+ test_bit(S_READY, &il->status),
+ UCODE_READY_TIMEOUT);
+ if (!ret) {
+ if (!test_bit(S_READY, &il->status)) {
+ IL_ERR("START_ALIVE timeout after %dms.\n",
+ jiffies_to_msecs(UCODE_READY_TIMEOUT));
+ return -ETIMEDOUT;
+ }
+ }
+
+ il4965_led_enable(il);
+
+out:
+ il->is_open = 1;
+ D_MAC80211("leave\n");
+ return 0;
+}
+
+void
+il4965_mac_stop(struct ieee80211_hw *hw)
+{
+ struct il_priv *il = hw->priv;
+
+ D_MAC80211("enter\n");
+
+ if (!il->is_open)
+ return;
+
+ il->is_open = 0;
+
+ il4965_down(il);
+
+ flush_workqueue(il->workqueue);
+
+ /* User space software may expect getting rfkill changes
+ * even if interface is down */
+ _il_wr(il, CSR_INT, 0xFFFFFFFF);
+ il_enable_rfkill_int(il);
+
+ D_MAC80211("leave\n");
+}
+
+void
+il4965_mac_tx(struct ieee80211_hw *hw,
+ struct ieee80211_tx_control *control,
+ struct sk_buff *skb)
+{
+ struct il_priv *il = hw->priv;
+
+ D_MACDUMP("enter\n");
+
+ D_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb->len,
+ ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate);
+
+ if (il4965_tx_skb(il, control->sta, skb))
+ dev_kfree_skb_any(skb);
+
+ D_MACDUMP("leave\n");
+}
+
+void
+il4965_mac_update_tkip_key(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+ struct ieee80211_key_conf *keyconf,
+ struct ieee80211_sta *sta, u32 iv32, u16 * phase1key)
+{
+ struct il_priv *il = hw->priv;
+
+ D_MAC80211("enter\n");
+
+ il4965_update_tkip_key(il, keyconf, sta, iv32, phase1key);
+
+ D_MAC80211("leave\n");
+}
+
+int
+il4965_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
+ struct ieee80211_vif *vif, struct ieee80211_sta *sta,
+ struct ieee80211_key_conf *key)
+{
+ struct il_priv *il = hw->priv;
+ int ret;
+ u8 sta_id;
+ bool is_default_wep_key = false;
+
+ D_MAC80211("enter\n");
+
+ if (il->cfg->mod_params->sw_crypto) {
+ D_MAC80211("leave - hwcrypto disabled\n");
+ return -EOPNOTSUPP;
+ }
+
+ /*
+ * To support IBSS RSN, don't program group keys in IBSS, the
+ * hardware will then not attempt to decrypt the frames.
+ */
+ if (vif->type == NL80211_IFTYPE_ADHOC &&
+ !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) {
+ D_MAC80211("leave - ad-hoc group key\n");
+ return -EOPNOTSUPP;
+ }
+
+ sta_id = il_sta_id_or_broadcast(il, sta);
+ if (sta_id == IL_INVALID_STATION)
+ return -EINVAL;
+
+ mutex_lock(&il->mutex);
+ il_scan_cancel_timeout(il, 100);
+
+ /*
+ * If we are getting WEP group key and we didn't receive any key mapping
+ * so far, we are in legacy wep mode (group key only), otherwise we are
+ * in 1X mode.
+ * In legacy wep mode, we use another host command to the uCode.
+ */
+ if ((key->cipher == WLAN_CIPHER_SUITE_WEP40 ||
+ key->cipher == WLAN_CIPHER_SUITE_WEP104) && !sta) {
+ if (cmd == SET_KEY)
+ is_default_wep_key = !il->_4965.key_mapping_keys;
+ else
+ is_default_wep_key =
+ (key->hw_key_idx == HW_KEY_DEFAULT);
+ }
+
+ switch (cmd) {
+ case SET_KEY:
+ if (is_default_wep_key)
+ ret = il4965_set_default_wep_key(il, key);
+ else
+ ret = il4965_set_dynamic_key(il, key, sta_id);
+
+ D_MAC80211("enable hwcrypto key\n");
+ break;
+ case DISABLE_KEY:
+ if (is_default_wep_key)
+ ret = il4965_remove_default_wep_key(il, key);
+ else
+ ret = il4965_remove_dynamic_key(il, key, sta_id);
+
+ D_MAC80211("disable hwcrypto key\n");
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ mutex_unlock(&il->mutex);
+ D_MAC80211("leave\n");
+
+ return ret;
+}
+
+int
+il4965_mac_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+ enum ieee80211_ampdu_mlme_action action,
+ struct ieee80211_sta *sta, u16 tid, u16 * ssn,
+ u8 buf_size)
+{
+ struct il_priv *il = hw->priv;
+ int ret = -EINVAL;
+
+ D_HT("A-MPDU action on addr %pM tid %d\n", sta->addr, tid);
+
+ if (!(il->cfg->sku & IL_SKU_N))
+ return -EACCES;
+
+ mutex_lock(&il->mutex);
+
+ switch (action) {
+ case IEEE80211_AMPDU_RX_START:
+ D_HT("start Rx\n");
+ ret = il4965_sta_rx_agg_start(il, sta, tid, *ssn);
+ break;
+ case IEEE80211_AMPDU_RX_STOP:
+ D_HT("stop Rx\n");
+ ret = il4965_sta_rx_agg_stop(il, sta, tid);
+ if (test_bit(S_EXIT_PENDING, &il->status))
+ ret = 0;
+ break;
+ case IEEE80211_AMPDU_TX_START:
+ D_HT("start Tx\n");
+ ret = il4965_tx_agg_start(il, vif, sta, tid, ssn);
+ break;
+ case IEEE80211_AMPDU_TX_STOP_CONT:
+ case IEEE80211_AMPDU_TX_STOP_FLUSH:
+ case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT:
+ D_HT("stop Tx\n");
+ ret = il4965_tx_agg_stop(il, vif, sta, tid);
+ if (test_bit(S_EXIT_PENDING, &il->status))
+ ret = 0;
+ break;
+ case IEEE80211_AMPDU_TX_OPERATIONAL:
+ ret = 0;
+ break;
+ }
+ mutex_unlock(&il->mutex);
+
+ return ret;
+}
+
+int
+il4965_mac_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta)
+{
+ struct il_priv *il = hw->priv;
+ struct il_station_priv *sta_priv = (void *)sta->drv_priv;
+ bool is_ap = vif->type == NL80211_IFTYPE_STATION;
+ int ret;
+ u8 sta_id;
+
+ D_INFO("received request to add station %pM\n", sta->addr);
+ mutex_lock(&il->mutex);
+ D_INFO("proceeding to add station %pM\n", sta->addr);
+ sta_priv->common.sta_id = IL_INVALID_STATION;
+
+ atomic_set(&sta_priv->pending_frames, 0);
+
+ ret =
+ il_add_station_common(il, sta->addr, is_ap, sta, &sta_id);
+ if (ret) {
+ IL_ERR("Unable to add station %pM (%d)\n", sta->addr, ret);
+ /* Should we return success if return code is EEXIST ? */
+ mutex_unlock(&il->mutex);
+ return ret;
+ }
+
+ sta_priv->common.sta_id = sta_id;
+
+ /* Initialize rate scaling */
+ D_INFO("Initializing rate scaling for station %pM\n", sta->addr);
+ il4965_rs_rate_init(il, sta, sta_id);
+ mutex_unlock(&il->mutex);
+
+ return 0;
+}
+
+void
+il4965_mac_channel_switch(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+ struct ieee80211_channel_switch *ch_switch)
+{
+ struct il_priv *il = hw->priv;
+ const struct il_channel_info *ch_info;
+ struct ieee80211_conf *conf = &hw->conf;
+ struct ieee80211_channel *channel = ch_switch->chandef.chan;
+ struct il_ht_config *ht_conf = &il->current_ht_config;
+ u16 ch;
+
+ D_MAC80211("enter\n");
+
+ mutex_lock(&il->mutex);
+
+ if (il_is_rfkill(il))
+ goto out;
+
+ if (test_bit(S_EXIT_PENDING, &il->status) ||
+ test_bit(S_SCANNING, &il->status) ||
+ test_bit(S_CHANNEL_SWITCH_PENDING, &il->status))
+ goto out;
+
+ if (!il_is_associated(il))
+ goto out;
+
+ if (!il->ops->set_channel_switch)
+ goto out;
+
+ ch = channel->hw_value;
+ if (le16_to_cpu(il->active.channel) == ch)
+ goto out;
+
+ ch_info = il_get_channel_info(il, channel->band, ch);
+ if (!il_is_channel_valid(ch_info)) {
+ D_MAC80211("invalid channel\n");
+ goto out;
+ }
+
+ spin_lock_irq(&il->lock);
+
+ il->current_ht_config.smps = conf->smps_mode;
+
+ /* Configure HT40 channels */
+ switch (cfg80211_get_chandef_type(&ch_switch->chandef)) {
+ case NL80211_CHAN_NO_HT:
+ case NL80211_CHAN_HT20:
+ il->ht.is_40mhz = false;
+ il->ht.extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_NONE;
+ break;
+ case NL80211_CHAN_HT40MINUS:
+ il->ht.extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_BELOW;
+ il->ht.is_40mhz = true;
+ break;
+ case NL80211_CHAN_HT40PLUS:
+ il->ht.extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_ABOVE;
+ il->ht.is_40mhz = true;
+ break;
+ }
+
+ if ((le16_to_cpu(il->staging.channel) != ch))
+ il->staging.flags = 0;
+
+ il_set_rxon_channel(il, channel);
+ il_set_rxon_ht(il, ht_conf);
+ il_set_flags_for_band(il, channel->band, il->vif);
+
+ spin_unlock_irq(&il->lock);
+
+ il_set_rate(il);
+ /*
+ * at this point, staging_rxon has the
+ * configuration for channel switch
+ */
+ set_bit(S_CHANNEL_SWITCH_PENDING, &il->status);
+ il->switch_channel = cpu_to_le16(ch);
+ if (il->ops->set_channel_switch(il, ch_switch)) {
+ clear_bit(S_CHANNEL_SWITCH_PENDING, &il->status);
+ il->switch_channel = 0;
+ ieee80211_chswitch_done(il->vif, false);
+ }
+
+out:
+ mutex_unlock(&il->mutex);
+ D_MAC80211("leave\n");
+}
+
+void
+il4965_configure_filter(struct ieee80211_hw *hw, unsigned int changed_flags,
+ unsigned int *total_flags, u64 multicast)
+{
+ struct il_priv *il = hw->priv;
+ __le32 filter_or = 0, filter_nand = 0;
+
+#define CHK(test, flag) do { \
+ if (*total_flags & (test)) \
+ filter_or |= (flag); \
+ else \
+ filter_nand |= (flag); \
+ } while (0)
+
+ D_MAC80211("Enter: changed: 0x%x, total: 0x%x\n", changed_flags,
+ *total_flags);
+
+ CHK(FIF_OTHER_BSS | FIF_PROMISC_IN_BSS, RXON_FILTER_PROMISC_MSK);
+ /* Setting _just_ RXON_FILTER_CTL2HOST_MSK causes FH errors */
+ CHK(FIF_CONTROL, RXON_FILTER_CTL2HOST_MSK | RXON_FILTER_PROMISC_MSK);
+ CHK(FIF_BCN_PRBRESP_PROMISC, RXON_FILTER_BCON_AWARE_MSK);
+
+#undef CHK
+
+ mutex_lock(&il->mutex);
+
+ il->staging.filter_flags &= ~filter_nand;
+ il->staging.filter_flags |= filter_or;
+
+ /*
+ * Not committing directly because hardware can perform a scan,
+ * but we'll eventually commit the filter flags change anyway.
+ */
+
+ mutex_unlock(&il->mutex);
+
+ /*
+ * Receiving all multicast frames is always enabled by the
+ * default flags setup in il_connection_init_rx_config()
+ * since we currently do not support programming multicast
+ * filters into the device.
+ */
+ *total_flags &=
+ FIF_OTHER_BSS | FIF_ALLMULTI | FIF_PROMISC_IN_BSS |
+ FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL;
+}
+
+/*****************************************************************************
+ *
+ * driver setup and teardown
+ *
+ *****************************************************************************/
+
+static void
+il4965_bg_txpower_work(struct work_struct *work)
+{
+ struct il_priv *il = container_of(work, struct il_priv,
+ txpower_work);
+
+ mutex_lock(&il->mutex);
+
+ /* If a scan happened to start before we got here
+ * then just return; the stats notification will
+ * kick off another scheduled work to compensate for
+ * any temperature delta we missed here. */
+ if (test_bit(S_EXIT_PENDING, &il->status) ||
+ test_bit(S_SCANNING, &il->status))
+ goto out;
+
+ /* Regardless of if we are associated, we must reconfigure the
+ * TX power since frames can be sent on non-radar channels while
+ * not associated */
+ il->ops->send_tx_power(il);
+
+ /* Update last_temperature to keep is_calib_needed from running
+ * when it isn't needed... */
+ il->last_temperature = il->temperature;
+out:
+ mutex_unlock(&il->mutex);
+}
+
+static void
+il4965_setup_deferred_work(struct il_priv *il)
+{
+ il->workqueue = create_singlethread_workqueue(DRV_NAME);
+
+ init_waitqueue_head(&il->wait_command_queue);
+
+ INIT_WORK(&il->restart, il4965_bg_restart);
+ INIT_WORK(&il->rx_replenish, il4965_bg_rx_replenish);
+ INIT_WORK(&il->run_time_calib_work, il4965_bg_run_time_calib_work);
+ INIT_DELAYED_WORK(&il->init_alive_start, il4965_bg_init_alive_start);
+ INIT_DELAYED_WORK(&il->alive_start, il4965_bg_alive_start);
+
+ il_setup_scan_deferred_work(il);
+
+ INIT_WORK(&il->txpower_work, il4965_bg_txpower_work);
+
+ setup_timer(&il->stats_periodic, il4965_bg_stats_periodic,
+ (unsigned long)il);
+
+ setup_timer(&il->watchdog, il_bg_watchdog, (unsigned long)il);
+
+ tasklet_init(&il->irq_tasklet,
+ (void (*)(unsigned long))il4965_irq_tasklet,
+ (unsigned long)il);
+}
+
+static void
+il4965_cancel_deferred_work(struct il_priv *il)
+{
+ cancel_work_sync(&il->txpower_work);
+ cancel_delayed_work_sync(&il->init_alive_start);
+ cancel_delayed_work(&il->alive_start);
+ cancel_work_sync(&il->run_time_calib_work);
+
+ il_cancel_scan_deferred_work(il);
+
+ del_timer_sync(&il->stats_periodic);
+}
+
+static void
+il4965_init_hw_rates(struct il_priv *il, struct ieee80211_rate *rates)
+{
+ int i;
+
+ for (i = 0; i < RATE_COUNT_LEGACY; i++) {
+ rates[i].bitrate = il_rates[i].ieee * 5;
+ rates[i].hw_value = i; /* Rate scaling will work on idxes */
+ rates[i].hw_value_short = i;
+ rates[i].flags = 0;
+ if ((i >= IL_FIRST_CCK_RATE) && (i <= IL_LAST_CCK_RATE)) {
+ /*
+ * If CCK != 1M then set short preamble rate flag.
+ */
+ rates[i].flags |=
+ (il_rates[i].plcp ==
+ RATE_1M_PLCP) ? 0 : IEEE80211_RATE_SHORT_PREAMBLE;
+ }
+ }
+}
+
+/*
+ * Acquire il->lock before calling this function !
+ */
+void
+il4965_set_wr_ptrs(struct il_priv *il, int txq_id, u32 idx)
+{
+ il_wr(il, HBUS_TARG_WRPTR, (idx & 0xff) | (txq_id << 8));
+ il_wr_prph(il, IL49_SCD_QUEUE_RDPTR(txq_id), idx);
+}
+
+void
+il4965_tx_queue_set_status(struct il_priv *il, struct il_tx_queue *txq,
+ int tx_fifo_id, int scd_retry)
+{
+ int txq_id = txq->q.id;
+
+ /* Find out whether to activate Tx queue */
+ int active = test_bit(txq_id, &il->txq_ctx_active_msk) ? 1 : 0;
+
+ /* Set up and activate */
+ il_wr_prph(il, IL49_SCD_QUEUE_STATUS_BITS(txq_id),
+ (active << IL49_SCD_QUEUE_STTS_REG_POS_ACTIVE) |
+ (tx_fifo_id << IL49_SCD_QUEUE_STTS_REG_POS_TXF) |
+ (scd_retry << IL49_SCD_QUEUE_STTS_REG_POS_WSL) |
+ (scd_retry << IL49_SCD_QUEUE_STTS_REG_POS_SCD_ACK) |
+ IL49_SCD_QUEUE_STTS_REG_MSK);
+
+ txq->sched_retry = scd_retry;
+
+ D_INFO("%s %s Queue %d on AC %d\n", active ? "Activate" : "Deactivate",
+ scd_retry ? "BA" : "AC", txq_id, tx_fifo_id);
+}
+
+static const struct ieee80211_ops il4965_mac_ops = {
+ .tx = il4965_mac_tx,
+ .start = il4965_mac_start,
+ .stop = il4965_mac_stop,
+ .add_interface = il_mac_add_interface,
+ .remove_interface = il_mac_remove_interface,
+ .change_interface = il_mac_change_interface,
+ .config = il_mac_config,
+ .configure_filter = il4965_configure_filter,
+ .set_key = il4965_mac_set_key,
+ .update_tkip_key = il4965_mac_update_tkip_key,
+ .conf_tx = il_mac_conf_tx,
+ .reset_tsf = il_mac_reset_tsf,
+ .bss_info_changed = il_mac_bss_info_changed,
+ .ampdu_action = il4965_mac_ampdu_action,
+ .hw_scan = il_mac_hw_scan,
+ .sta_add = il4965_mac_sta_add,
+ .sta_remove = il_mac_sta_remove,
+ .channel_switch = il4965_mac_channel_switch,
+ .tx_last_beacon = il_mac_tx_last_beacon,
+ .flush = il_mac_flush,
+};
+
+static int
+il4965_init_drv(struct il_priv *il)
+{
+ int ret;
+
+ spin_lock_init(&il->sta_lock);
+ spin_lock_init(&il->hcmd_lock);
+
+ INIT_LIST_HEAD(&il->free_frames);
+
+ mutex_init(&il->mutex);
+
+ il->ieee_channels = NULL;
+ il->ieee_rates = NULL;
+ il->band = IEEE80211_BAND_2GHZ;
+
+ il->iw_mode = NL80211_IFTYPE_STATION;
+ il->current_ht_config.smps = IEEE80211_SMPS_STATIC;
+ il->missed_beacon_threshold = IL_MISSED_BEACON_THRESHOLD_DEF;
+
+ /* initialize force reset */
+ il->force_reset.reset_duration = IL_DELAY_NEXT_FORCE_FW_RELOAD;
+
+ /* Choose which receivers/antennas to use */
+ if (il->ops->set_rxon_chain)
+ il->ops->set_rxon_chain(il);
+
+ il_init_scan_params(il);
+
+ ret = il_init_channel_map(il);
+ if (ret) {
+ IL_ERR("initializing regulatory failed: %d\n", ret);
+ goto err;
+ }
+
+ ret = il_init_geos(il);
+ if (ret) {
+ IL_ERR("initializing geos failed: %d\n", ret);
+ goto err_free_channel_map;
+ }
+ il4965_init_hw_rates(il, il->ieee_rates);
+
+ return 0;
+
+err_free_channel_map:
+ il_free_channel_map(il);
+err:
+ return ret;
+}
+
+static void
+il4965_uninit_drv(struct il_priv *il)
+{
+ il_free_geos(il);
+ il_free_channel_map(il);
+ kfree(il->scan_cmd);
+}
+
+static void
+il4965_hw_detect(struct il_priv *il)
+{
+ il->hw_rev = _il_rd(il, CSR_HW_REV);
+ il->hw_wa_rev = _il_rd(il, CSR_HW_REV_WA_REG);
+ il->rev_id = il->pci_dev->revision;
+ D_INFO("HW Revision ID = 0x%X\n", il->rev_id);
+}
+
+static struct il_sensitivity_ranges il4965_sensitivity = {
+ .min_nrg_cck = 97,
+ .max_nrg_cck = 0, /* not used, set to 0 */
+
+ .auto_corr_min_ofdm = 85,
+ .auto_corr_min_ofdm_mrc = 170,
+ .auto_corr_min_ofdm_x1 = 105,
+ .auto_corr_min_ofdm_mrc_x1 = 220,
+
+ .auto_corr_max_ofdm = 120,
+ .auto_corr_max_ofdm_mrc = 210,
+ .auto_corr_max_ofdm_x1 = 140,
+ .auto_corr_max_ofdm_mrc_x1 = 270,
+
+ .auto_corr_min_cck = 125,
+ .auto_corr_max_cck = 200,
+ .auto_corr_min_cck_mrc = 200,
+ .auto_corr_max_cck_mrc = 400,
+
+ .nrg_th_cck = 100,
+ .nrg_th_ofdm = 100,
+
+ .barker_corr_th_min = 190,
+ .barker_corr_th_min_mrc = 390,
+ .nrg_th_cca = 62,
+};
+
+static void
+il4965_set_hw_params(struct il_priv *il)
+{
+ il->hw_params.bcast_id = IL4965_BROADCAST_ID;
+ il->hw_params.max_rxq_size = RX_QUEUE_SIZE;
+ il->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG;
+ if (il->cfg->mod_params->amsdu_size_8K)
+ il->hw_params.rx_page_order = get_order(IL_RX_BUF_SIZE_8K);
+ else
+ il->hw_params.rx_page_order = get_order(IL_RX_BUF_SIZE_4K);
+
+ il->hw_params.max_beacon_itrvl = IL_MAX_UCODE_BEACON_INTERVAL;
+
+ if (il->cfg->mod_params->disable_11n)
+ il->cfg->sku &= ~IL_SKU_N;
+
+ if (il->cfg->mod_params->num_of_queues >= IL_MIN_NUM_QUEUES &&
+ il->cfg->mod_params->num_of_queues <= IL49_NUM_QUEUES)
+ il->cfg->num_of_queues =
+ il->cfg->mod_params->num_of_queues;
+
+ il->hw_params.max_txq_num = il->cfg->num_of_queues;
+ il->hw_params.dma_chnl_num = FH49_TCSR_CHNL_NUM;
+ il->hw_params.scd_bc_tbls_size =
+ il->cfg->num_of_queues *
+ sizeof(struct il4965_scd_bc_tbl);
+
+ il->hw_params.tfd_size = sizeof(struct il_tfd);
+ il->hw_params.max_stations = IL4965_STATION_COUNT;
+ il->hw_params.max_data_size = IL49_RTC_DATA_SIZE;
+ il->hw_params.max_inst_size = IL49_RTC_INST_SIZE;
+ il->hw_params.max_bsm_size = BSM_SRAM_SIZE;
+ il->hw_params.ht40_channel = BIT(IEEE80211_BAND_5GHZ);
+
+ il->hw_params.rx_wrt_ptr_reg = FH49_RSCSR_CHNL0_WPTR;
+
+ il->hw_params.tx_chains_num = il4965_num_of_ant(il->cfg->valid_tx_ant);
+ il->hw_params.rx_chains_num = il4965_num_of_ant(il->cfg->valid_rx_ant);
+ il->hw_params.valid_tx_ant = il->cfg->valid_tx_ant;
+ il->hw_params.valid_rx_ant = il->cfg->valid_rx_ant;
+
+ il->hw_params.ct_kill_threshold =
+ CELSIUS_TO_KELVIN(CT_KILL_THRESHOLD_LEGACY);
+
+ il->hw_params.sens = &il4965_sensitivity;
+ il->hw_params.beacon_time_tsf_bits = IL4965_EXT_BEACON_TIME_POS;
+}
+
+static int
+il4965_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ int err = 0;
+ struct il_priv *il;
+ struct ieee80211_hw *hw;
+ struct il_cfg *cfg = (struct il_cfg *)(ent->driver_data);
+ unsigned long flags;
+ u16 pci_cmd;
+
+ /************************
+ * 1. Allocating HW data
+ ************************/
+
+ hw = ieee80211_alloc_hw(sizeof(struct il_priv), &il4965_mac_ops);
+ if (!hw) {
+ err = -ENOMEM;
+ goto out;
+ }
+ il = hw->priv;
+ il->hw = hw;
+ SET_IEEE80211_DEV(hw, &pdev->dev);
+
+ D_INFO("*** LOAD DRIVER ***\n");
+ il->cfg = cfg;
+ il->ops = &il4965_ops;
+#ifdef CONFIG_IWLEGACY_DEBUGFS
+ il->debugfs_ops = &il4965_debugfs_ops;
+#endif
+ il->pci_dev = pdev;
+ il->inta_mask = CSR_INI_SET_MASK;
+
+ /**************************
+ * 2. Initializing PCI bus
+ **************************/
+ pci_disable_link_state(pdev,
+ PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 |
+ PCIE_LINK_STATE_CLKPM);
+
+ if (pci_enable_device(pdev)) {
+ err = -ENODEV;
+ goto out_ieee80211_free_hw;
+ }
+
+ pci_set_master(pdev);
+
+ err = pci_set_dma_mask(pdev, DMA_BIT_MASK(36));
+ if (!err)
+ err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(36));
+ if (err) {
+ err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (!err)
+ err =
+ pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ /* both attempts failed: */
+ if (err) {
+ IL_WARN("No suitable DMA available.\n");
+ goto out_pci_disable_device;
+ }
+ }
+
+ err = pci_request_regions(pdev, DRV_NAME);
+ if (err)
+ goto out_pci_disable_device;
+
+ pci_set_drvdata(pdev, il);
+
+ /***********************
+ * 3. Read REV register
+ ***********************/
+ il->hw_base = pci_ioremap_bar(pdev, 0);
+ if (!il->hw_base) {
+ err = -ENODEV;
+ goto out_pci_release_regions;
+ }
+
+ D_INFO("pci_resource_len = 0x%08llx\n",
+ (unsigned long long)pci_resource_len(pdev, 0));
+ D_INFO("pci_resource_base = %p\n", il->hw_base);
+
+ /* these spin locks will be used in apm_ops.init and EEPROM access
+ * we should init now
+ */
+ spin_lock_init(&il->reg_lock);
+ spin_lock_init(&il->lock);
+
+ /*
+ * stop and reset the on-board processor just in case it is in a
+ * strange state ... like being left stranded by a primary kernel
+ * and this is now the kdump kernel trying to start up
+ */
+ _il_wr(il, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
+
+ il4965_hw_detect(il);
+ IL_INFO("Detected %s, REV=0x%X\n", il->cfg->name, il->hw_rev);
+
+ /* We disable the RETRY_TIMEOUT register (0x41) to keep
+ * PCI Tx retries from interfering with C3 CPU state */
+ pci_write_config_byte(pdev, PCI_CFG_RETRY_TIMEOUT, 0x00);
+
+ il4965_prepare_card_hw(il);
+ if (!il->hw_ready) {
+ IL_WARN("Failed, HW not ready\n");
+ err = -EIO;
+ goto out_iounmap;
+ }
+
+ /*****************
+ * 4. Read EEPROM
+ *****************/
+ /* Read the EEPROM */
+ err = il_eeprom_init(il);
+ if (err) {
+ IL_ERR("Unable to init EEPROM\n");
+ goto out_iounmap;
+ }
+ err = il4965_eeprom_check_version(il);
+ if (err)
+ goto out_free_eeprom;
+
+ /* extract MAC Address */
+ il4965_eeprom_get_mac(il, il->addresses[0].addr);
+ D_INFO("MAC address: %pM\n", il->addresses[0].addr);
+ il->hw->wiphy->addresses = il->addresses;
+ il->hw->wiphy->n_addresses = 1;
+
+ /************************
+ * 5. Setup HW constants
+ ************************/
+ il4965_set_hw_params(il);
+
+ /*******************
+ * 6. Setup il
+ *******************/
+
+ err = il4965_init_drv(il);
+ if (err)
+ goto out_free_eeprom;
+ /* At this point both hw and il are initialized. */
+
+ /********************
+ * 7. Setup services
+ ********************/
+ spin_lock_irqsave(&il->lock, flags);
+ il_disable_interrupts(il);
+ spin_unlock_irqrestore(&il->lock, flags);
+
+ pci_enable_msi(il->pci_dev);
+
+ err = request_irq(il->pci_dev->irq, il_isr, IRQF_SHARED, DRV_NAME, il);
+ if (err) {
+ IL_ERR("Error allocating IRQ %d\n", il->pci_dev->irq);
+ goto out_disable_msi;
+ }
+
+ il4965_setup_deferred_work(il);
+ il4965_setup_handlers(il);
+
+ /*********************************************
+ * 8. Enable interrupts and read RFKILL state
+ *********************************************/
+
+ /* enable rfkill interrupt: hw bug w/a */
+ pci_read_config_word(il->pci_dev, PCI_COMMAND, &pci_cmd);
+ if (pci_cmd & PCI_COMMAND_INTX_DISABLE) {
+ pci_cmd &= ~PCI_COMMAND_INTX_DISABLE;
+ pci_write_config_word(il->pci_dev, PCI_COMMAND, pci_cmd);
+ }
+
+ il_enable_rfkill_int(il);
+
+ /* If platform's RF_KILL switch is NOT set to KILL */
+ if (_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
+ clear_bit(S_RFKILL, &il->status);
+ else
+ set_bit(S_RFKILL, &il->status);
+
+ wiphy_rfkill_set_hw_state(il->hw->wiphy,
+ test_bit(S_RFKILL, &il->status));
+
+ il_power_initialize(il);
+
+ init_completion(&il->_4965.firmware_loading_complete);
+
+ err = il4965_request_firmware(il, true);
+ if (err)
+ goto out_destroy_workqueue;
+
+ return 0;
+
+out_destroy_workqueue:
+ destroy_workqueue(il->workqueue);
+ il->workqueue = NULL;
+ free_irq(il->pci_dev->irq, il);
+out_disable_msi:
+ pci_disable_msi(il->pci_dev);
+ il4965_uninit_drv(il);
+out_free_eeprom:
+ il_eeprom_free(il);
+out_iounmap:
+ iounmap(il->hw_base);
+out_pci_release_regions:
+ pci_release_regions(pdev);
+out_pci_disable_device:
+ pci_disable_device(pdev);
+out_ieee80211_free_hw:
+ ieee80211_free_hw(il->hw);
+out:
+ return err;
+}
+
+static void
+il4965_pci_remove(struct pci_dev *pdev)
+{
+ struct il_priv *il = pci_get_drvdata(pdev);
+ unsigned long flags;
+
+ if (!il)
+ return;
+
+ wait_for_completion(&il->_4965.firmware_loading_complete);
+
+ D_INFO("*** UNLOAD DRIVER ***\n");
+
+ il_dbgfs_unregister(il);
+ sysfs_remove_group(&pdev->dev.kobj, &il_attribute_group);
+
+ /* ieee80211_unregister_hw call wil cause il_mac_stop to
+ * to be called and il4965_down since we are removing the device
+ * we need to set S_EXIT_PENDING bit.
+ */
+ set_bit(S_EXIT_PENDING, &il->status);
+
+ il_leds_exit(il);
+
+ if (il->mac80211_registered) {
+ ieee80211_unregister_hw(il->hw);
+ il->mac80211_registered = 0;
+ } else {
+ il4965_down(il);
+ }
+
+ /*
+ * Make sure device is reset to low power before unloading driver.
+ * This may be redundant with il4965_down(), but there are paths to
+ * run il4965_down() without calling apm_ops.stop(), and there are
+ * paths to avoid running il4965_down() at all before leaving driver.
+ * This (inexpensive) call *makes sure* device is reset.
+ */
+ il_apm_stop(il);
+
+ /* make sure we flush any pending irq or
+ * tasklet for the driver
+ */
+ spin_lock_irqsave(&il->lock, flags);
+ il_disable_interrupts(il);
+ spin_unlock_irqrestore(&il->lock, flags);
+
+ il4965_synchronize_irq(il);
+
+ il4965_dealloc_ucode_pci(il);
+
+ if (il->rxq.bd)
+ il4965_rx_queue_free(il, &il->rxq);
+ il4965_hw_txq_ctx_free(il);
+
+ il_eeprom_free(il);
+
+ /*netif_stop_queue(dev); */
+ flush_workqueue(il->workqueue);
+
+ /* ieee80211_unregister_hw calls il_mac_stop, which flushes
+ * il->workqueue... so we can't take down the workqueue
+ * until now... */
+ destroy_workqueue(il->workqueue);
+ il->workqueue = NULL;
+
+ free_irq(il->pci_dev->irq, il);
+ pci_disable_msi(il->pci_dev);
+ iounmap(il->hw_base);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+
+ il4965_uninit_drv(il);
+
+ dev_kfree_skb(il->beacon_skb);
+
+ ieee80211_free_hw(il->hw);
+}
+
+/*
+ * Activate/Deactivate Tx DMA/FIFO channels according tx fifos mask
+ * must be called under il->lock and mac access
+ */
+void
+il4965_txq_set_sched(struct il_priv *il, u32 mask)
+{
+ il_wr_prph(il, IL49_SCD_TXFACT, mask);
+}
+
+/*****************************************************************************
+ *
+ * driver and module entry point
+ *
+ *****************************************************************************/
+
+/* Hardware specific file defines the PCI IDs table for that hardware module */
+static const struct pci_device_id il4965_hw_card_ids[] = {
+ {IL_PCI_DEVICE(0x4229, PCI_ANY_ID, il4965_cfg)},
+ {IL_PCI_DEVICE(0x4230, PCI_ANY_ID, il4965_cfg)},
+ {0}
+};
+MODULE_DEVICE_TABLE(pci, il4965_hw_card_ids);
+
+static struct pci_driver il4965_driver = {
+ .name = DRV_NAME,
+ .id_table = il4965_hw_card_ids,
+ .probe = il4965_pci_probe,
+ .remove = il4965_pci_remove,
+ .driver.pm = IL_LEGACY_PM_OPS,
+};
+
+static int __init
+il4965_init(void)
+{
+
+ int ret;
+ pr_info(DRV_DESCRIPTION ", " DRV_VERSION "\n");
+ pr_info(DRV_COPYRIGHT "\n");
+
+ ret = il4965_rate_control_register();
+ if (ret) {
+ pr_err("Unable to register rate control algorithm: %d\n", ret);
+ return ret;
+ }
+
+ ret = pci_register_driver(&il4965_driver);
+ if (ret) {
+ pr_err("Unable to initialize PCI module\n");
+ goto error_register;
+ }
+
+ return ret;
+
+error_register:
+ il4965_rate_control_unregister();
+ return ret;
+}
+
+static void __exit
+il4965_exit(void)
+{
+ pci_unregister_driver(&il4965_driver);
+ il4965_rate_control_unregister();
+}
+
+module_exit(il4965_exit);
+module_init(il4965_init);
+
+#ifdef CONFIG_IWLEGACY_DEBUG
+module_param_named(debug, il_debug_level, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "debug output mask");
+#endif
+
+module_param_named(swcrypto, il4965_mod_params.sw_crypto, int, S_IRUGO);
+MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])");
+module_param_named(queues_num, il4965_mod_params.num_of_queues, int, S_IRUGO);
+MODULE_PARM_DESC(queues_num, "number of hw queues.");
+module_param_named(11n_disable, il4965_mod_params.disable_11n, int, S_IRUGO);
+MODULE_PARM_DESC(11n_disable, "disable 11n functionality");
+module_param_named(amsdu_size_8K, il4965_mod_params.amsdu_size_8K, int,
+ S_IRUGO);
+MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size (default 0 [disabled])");
+module_param_named(fw_restart, il4965_mod_params.restart_fw, int, S_IRUGO);
+MODULE_PARM_DESC(fw_restart, "restart firmware in case of error");