diff options
Diffstat (limited to 'kernel/drivers/net/wireless/ath/ath9k/Kconfig')
| -rw-r--r-- | kernel/drivers/net/wireless/ath/ath9k/Kconfig | 178 |
1 files changed, 178 insertions, 0 deletions
diff --git a/kernel/drivers/net/wireless/ath/ath9k/Kconfig b/kernel/drivers/net/wireless/ath/ath9k/Kconfig new file mode 100644 index 000000000..fee0cadb0 --- /dev/null +++ b/kernel/drivers/net/wireless/ath/ath9k/Kconfig @@ -0,0 +1,178 @@ +config ATH9K_HW + tristate +config ATH9K_COMMON + tristate + select ATH_COMMON + select DEBUG_FS + select RELAY +config ATH9K_DFS_DEBUGFS + def_bool y + depends on ATH9K_DEBUGFS && ATH9K_DFS_CERTIFIED + +config ATH9K_BTCOEX_SUPPORT + bool "Atheros bluetooth coexistence support" + depends on (ATH9K || ATH9K_HTC) + default y + ---help--- + Say Y, if you want to use the ath9k/ath9k_htc radios together with + Bluetooth modules in the same system. + +config ATH9K + tristate "Atheros 802.11n wireless cards support" + depends on MAC80211 && HAS_DMA + select ATH9K_HW + select MAC80211_LEDS + select LEDS_CLASS + select NEW_LEDS + select ATH9K_COMMON + ---help--- + This module adds support for wireless adapters based on + Atheros IEEE 802.11n AR5008, AR9001 and AR9002 family + of chipsets. For a specific list of supported external + cards, laptops that already ship with these cards and + APs that come with these cards refer to ath9k wiki + products page: + + http://wireless.kernel.org/en/users/Drivers/ath9k/products + + If you choose to build a module, it'll be called ath9k. + +config ATH9K_PCI + bool "Atheros ath9k PCI/PCIe bus support" + default y + depends on ATH9K && PCI + ---help--- + This option enables the PCI bus support in ath9k. + + Say Y, if you have a compatible PCI/PCIe wireless card. + +config ATH9K_AHB + bool "Atheros ath9k AHB bus support" + depends on ATH9K + default n + ---help--- + This option enables the AHB bus support in ath9k. + + Say Y, if you have a SoC with a compatible built-in + wireless MAC. Say N if unsure. + +config ATH9K_DEBUGFS + bool "Atheros ath9k debugging" + depends on ATH9K && DEBUG_FS + select MAC80211_DEBUGFS + select RELAY + ---help--- + Say Y, if you need access to ath9k's statistics for + interrupts, rate control, etc. + + Also required for changing debug message flags at run time. + +config ATH9K_STATION_STATISTICS + bool "Detailed station statistics" + depends on ATH9K && ATH9K_DEBUGFS && DEBUG_FS + select MAC80211_DEBUGFS + default n + ---help--- + This option enables detailed statistics for association stations. + +config ATH9K_DFS_CERTIFIED + bool "Atheros DFS support for certified platforms" + depends on ATH9K && CFG80211_CERTIFICATION_ONUS + default n + ---help--- + This option enables DFS support for initiating radiation on + ath9k. There is no way to dynamically detect if a card was DFS + certified and as such this is left as a build time option. This + option should only be enabled by system integrators that can + guarantee that all the platforms that their kernel will run on + have obtained appropriate regulatory body certification for a + respective Atheros card by using ath9k on the target shipping + platforms. + + This is currently only a placeholder for future DFS support, + as DFS support requires more components that still need to be + developed. At this point enabling this option won't do anything + except increase code size. + +config ATH9K_DYNACK + bool "Atheros ath9k ACK timeout estimation algorithm (EXPERIMENTAL)" + depends on ATH9K + default n + ---help--- + This option enables ath9k dynamic ACK timeout estimation algorithm + based on ACK frame RX timestamp, TX frame timestamp and frame + duration + +config ATH9K_TX99 + bool "Atheros ath9k TX99 testing support" + depends on ATH9K_DEBUGFS && CFG80211_CERTIFICATION_ONUS + default n + ---help--- + Say N. This should only be enabled on systems undergoing + certification testing and evaluation in a controlled environment. + Enabling this will only enable TX99 support, all other modes of + operation will be disabled. + + TX99 support enables Specific Absorption Rate (SAR) testing. + SAR is the unit of measurement for the amount of radio frequency(RF) + absorbed by the body when using a wireless device. The RF exposure + limits used are expressed in the terms of SAR, which is a measure + of the electric and magnetic field strength and power density for + transmitters operating at frequencies from 300 kHz to 100 GHz. + Regulatory bodies around the world require that wireless device + be evaluated to meet the RF exposure limits set forth in the + governmental SAR regulations. + +config ATH9K_WOW + bool "Wake on Wireless LAN support (EXPERIMENTAL)" + depends on ATH9K && PM + default n + ---help--- + This option enables Wake on Wireless LAN support for certain cards. + Currently, AR9462 is supported. + +config ATH9K_RFKILL + bool "Atheros ath9k rfkill support" if EXPERT + depends on ATH9K + depends on RFKILL=y || RFKILL=ATH9K + default y + help + Say Y to have ath9k poll the RF-Kill GPIO every couple of + seconds. Turn off to save power, but enable it if you have + a platform that can toggle the RF-Kill GPIO. + +config ATH9K_CHANNEL_CONTEXT + bool "Channel Context support" + depends on ATH9K + default n + ---help--- + This option enables channel context support in ath9k, which is needed + for multi-channel concurrency. Enable this if P2P PowerSave support + is required. + +config ATH9K_PCOEM + bool "Atheros ath9k support for PC OEM cards" if EXPERT + depends on ATH9K + default y + +config ATH9K_HTC + tristate "Atheros HTC based wireless cards support" + depends on USB && MAC80211 + select ATH9K_HW + select MAC80211_LEDS + select LEDS_CLASS + select NEW_LEDS + select ATH9K_COMMON + ---help--- + Support for Atheros HTC based cards. + Chipsets supported: AR9271 + + For more information: http://wireless.kernel.org/en/users/Drivers/ath9k_htc + + The built module will be ath9k_htc. + +config ATH9K_HTC_DEBUGFS + bool "Atheros ath9k_htc debugging" + depends on ATH9K_HTC && DEBUG_FS + ---help--- + Say Y, if you need access to ath9k_htc's statistics. |