diff options
Diffstat (limited to 'kernel/drivers/net/wireless/ath/ath5k/eeprom.h')
| -rw-r--r-- | kernel/drivers/net/wireless/ath/ath5k/eeprom.h | 495 |
1 files changed, 495 insertions, 0 deletions
diff --git a/kernel/drivers/net/wireless/ath/ath5k/eeprom.h b/kernel/drivers/net/wireless/ath/ath5k/eeprom.h new file mode 100644 index 000000000..693296ee9 --- /dev/null +++ b/kernel/drivers/net/wireless/ath/ath5k/eeprom.h @@ -0,0 +1,495 @@ +/* + * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org> + * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com> + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +/* + * Common ar5xxx EEPROM data offsets (set these on AR5K_EEPROM_BASE) + */ +#define AR5K_EEPROM_PCIE_OFFSET 0x02 /* Contains offset to PCI-E infos */ +#define AR5K_EEPROM_PCIE_SERDES_SECTION 0x40 /* PCIE_OFFSET points here when + * SERDES infos are present */ +#define AR5K_EEPROM_MAGIC 0x003d /* EEPROM Magic number */ +#define AR5K_EEPROM_MAGIC_VALUE 0x5aa5 /* Default - found on EEPROM */ + +#define AR5K_EEPROM_IS_HB63 0x000b /* Talon detect */ + +#define AR5K_EEPROM_RFKILL 0x0f +#define AR5K_EEPROM_RFKILL_GPIO_SEL 0x0000001c +#define AR5K_EEPROM_RFKILL_GPIO_SEL_S 2 +#define AR5K_EEPROM_RFKILL_POLARITY 0x00000002 +#define AR5K_EEPROM_RFKILL_POLARITY_S 1 + +#define AR5K_EEPROM_REG_DOMAIN 0x00bf /* EEPROM regdom */ + +/* FLASH(EEPROM) Defines for AR531X chips */ +#define AR5K_EEPROM_SIZE_LOWER 0x1b /* size info -- lower */ +#define AR5K_EEPROM_SIZE_UPPER 0x1c /* size info -- upper */ +#define AR5K_EEPROM_SIZE_UPPER_MASK 0xfff0 +#define AR5K_EEPROM_SIZE_UPPER_SHIFT 4 +#define AR5K_EEPROM_SIZE_ENDLOC_SHIFT 12 + +#define AR5K_EEPROM_CHECKSUM 0x00c0 /* EEPROM checksum */ +#define AR5K_EEPROM_INFO_BASE 0x00c0 /* EEPROM header */ +#define AR5K_EEPROM_INFO_MAX (0x400 - AR5K_EEPROM_INFO_BASE) +#define AR5K_EEPROM_INFO_CKSUM 0xffff +#define AR5K_EEPROM_INFO(_n) (AR5K_EEPROM_INFO_BASE + (_n)) + +#define AR5K_EEPROM_VERSION AR5K_EEPROM_INFO(1) /* EEPROM Version */ +#define AR5K_EEPROM_VERSION_3_0 0x3000 /* No idea what's going on before this version */ +#define AR5K_EEPROM_VERSION_3_1 0x3001 /* ob/db values for 2GHz (ar5211_rfregs) */ +#define AR5K_EEPROM_VERSION_3_2 0x3002 /* different frequency representation (eeprom_bin2freq) */ +#define AR5K_EEPROM_VERSION_3_3 0x3003 /* offsets changed, has 32 CTLs (see below) and ee_false_detect (eeprom_read_modes) */ +#define AR5K_EEPROM_VERSION_3_4 0x3004 /* has ee_i_gain, ee_cck_ofdm_power_delta (eeprom_read_modes) */ +#define AR5K_EEPROM_VERSION_4_0 0x4000 /* has ee_misc, ee_cal_pier, ee_turbo_max_power and ee_xr_power (eeprom_init) */ +#define AR5K_EEPROM_VERSION_4_1 0x4001 /* has ee_margin_tx_rx (eeprom_init) */ +#define AR5K_EEPROM_VERSION_4_2 0x4002 /* has ee_cck_ofdm_gain_delta (eeprom_init) */ +#define AR5K_EEPROM_VERSION_4_3 0x4003 /* power calibration changes */ +#define AR5K_EEPROM_VERSION_4_4 0x4004 +#define AR5K_EEPROM_VERSION_4_5 0x4005 +#define AR5K_EEPROM_VERSION_4_6 0x4006 /* has ee_scaled_cck_delta */ +#define AR5K_EEPROM_VERSION_4_7 0x3007 /* 4007 ? */ +#define AR5K_EEPROM_VERSION_4_9 0x4009 /* EAR futureproofing */ +#define AR5K_EEPROM_VERSION_5_0 0x5000 /* Has 2413 PDADC calibration etc */ +#define AR5K_EEPROM_VERSION_5_1 0x5001 /* Has capability values */ +#define AR5K_EEPROM_VERSION_5_3 0x5003 /* Has spur mitigation tables */ + +#define AR5K_EEPROM_MODE_11A 0 +#define AR5K_EEPROM_MODE_11B 1 +#define AR5K_EEPROM_MODE_11G 2 + +#define AR5K_EEPROM_HDR AR5K_EEPROM_INFO(2) /* Header that contains the device caps */ +#define AR5K_EEPROM_HDR_11A(_v) (((_v) >> AR5K_EEPROM_MODE_11A) & 0x1) +#define AR5K_EEPROM_HDR_11B(_v) (((_v) >> AR5K_EEPROM_MODE_11B) & 0x1) +#define AR5K_EEPROM_HDR_11G(_v) (((_v) >> AR5K_EEPROM_MODE_11G) & 0x1) +#define AR5K_EEPROM_HDR_T_2GHZ_DIS(_v) (((_v) >> 3) & 0x1) /* Disable turbo for 2GHz */ +#define AR5K_EEPROM_HDR_T_5GHZ_DBM(_v) (((_v) >> 4) & 0x7f) /* Max turbo power for < 2W power consumption */ +#define AR5K_EEPROM_HDR_DEVICE(_v) (((_v) >> 11) & 0x7) /* Device type (1 Cardbus, 2 PCI, 3 MiniPCI, 4 AP) */ +#define AR5K_EEPROM_HDR_RFKILL(_v) (((_v) >> 14) & 0x1) /* Device has RFKill support */ +#define AR5K_EEPROM_HDR_T_5GHZ_DIS(_v) (((_v) >> 15) & 0x1) /* Disable turbo for 5GHz */ + +/* Newer EEPROMs are using a different offset */ +#define AR5K_EEPROM_OFF(_v, _v3_0, _v3_3) \ + (((_v) >= AR5K_EEPROM_VERSION_3_3) ? _v3_3 : _v3_0) + +#define AR5K_EEPROM_ANT_GAIN(_v) AR5K_EEPROM_OFF(_v, 0x00c4, 0x00c3) +#define AR5K_EEPROM_ANT_GAIN_5GHZ(_v) ((s8)(((_v) >> 8) & 0xff)) +#define AR5K_EEPROM_ANT_GAIN_2GHZ(_v) ((s8)((_v) & 0xff)) + +/* Misc values available since EEPROM 4.0 */ +#define AR5K_EEPROM_MISC0 AR5K_EEPROM_INFO(4) +#define AR5K_EEPROM_EARSTART(_v) ((_v) & 0xfff) +#define AR5K_EEPROM_HDR_XR2_DIS(_v) (((_v) >> 12) & 0x1) +#define AR5K_EEPROM_HDR_XR5_DIS(_v) (((_v) >> 13) & 0x1) +#define AR5K_EEPROM_EEMAP(_v) (((_v) >> 14) & 0x3) + +#define AR5K_EEPROM_MISC1 AR5K_EEPROM_INFO(5) +#define AR5K_EEPROM_TARGET_PWRSTART(_v) ((_v) & 0xfff) +#define AR5K_EEPROM_HAS32KHZCRYSTAL(_v) (((_v) >> 14) & 0x1) /* has 32KHz crystal for sleep mode */ +#define AR5K_EEPROM_HAS32KHZCRYSTAL_OLD(_v) (((_v) >> 15) & 0x1) + +#define AR5K_EEPROM_MISC2 AR5K_EEPROM_INFO(6) +#define AR5K_EEPROM_EEP_FILE_VERSION(_v) (((_v) >> 8) & 0xff) +#define AR5K_EEPROM_EAR_FILE_VERSION(_v) ((_v) & 0xff) + +#define AR5K_EEPROM_MISC3 AR5K_EEPROM_INFO(7) +#define AR5K_EEPROM_ART_BUILD_NUM(_v) (((_v) >> 10) & 0x3f) +#define AR5K_EEPROM_EAR_FILE_ID(_v) ((_v) & 0xff) + +#define AR5K_EEPROM_MISC4 AR5K_EEPROM_INFO(8) +#define AR5K_EEPROM_CAL_DATA_START(_v) (((_v) >> 4) & 0xfff) +#define AR5K_EEPROM_MASK_R0(_v) (((_v) >> 2) & 0x3) /* modes supported by radio 0 (bit 1: G, bit 2: A) */ +#define AR5K_EEPROM_MASK_R1(_v) ((_v) & 0x3) /* modes supported by radio 1 (bit 1: G, bit 2: A) */ + +#define AR5K_EEPROM_MISC5 AR5K_EEPROM_INFO(9) +#define AR5K_EEPROM_COMP_DIS(_v) ((_v) & 0x1) /* disable compression */ +#define AR5K_EEPROM_AES_DIS(_v) (((_v) >> 1) & 0x1) /* disable AES */ +#define AR5K_EEPROM_FF_DIS(_v) (((_v) >> 2) & 0x1) /* disable fast frames */ +#define AR5K_EEPROM_BURST_DIS(_v) (((_v) >> 3) & 0x1) /* disable bursting */ +#define AR5K_EEPROM_MAX_QCU(_v) (((_v) >> 4) & 0xf) /* max number of QCUs. defaults to 10 */ +#define AR5K_EEPROM_HEAVY_CLIP_EN(_v) (((_v) >> 8) & 0x1) /* enable heavy clipping */ +#define AR5K_EEPROM_KEY_CACHE_SIZE(_v) (((_v) >> 12) & 0xf) /* key cache size. defaults to 128 */ + +#define AR5K_EEPROM_MISC6 AR5K_EEPROM_INFO(10) +#define AR5K_EEPROM_TX_CHAIN_DIS ((_v) & 0x7) /* MIMO chains disabled for TX bitmask */ +#define AR5K_EEPROM_RX_CHAIN_DIS (((_v) >> 3) & 0x7) /* MIMO chains disabled for RX bitmask */ +#define AR5K_EEPROM_FCC_MID_EN (((_v) >> 6) & 0x1) /* 5.47-5.7GHz supported */ +#define AR5K_EEPROM_JAP_U1EVEN_EN (((_v) >> 7) & 0x1) /* Japan UNII1 band (5.15-5.25GHz) on even channels (5180, 5200, 5220, 5240) supported */ +#define AR5K_EEPROM_JAP_U2_EN (((_v) >> 8) & 0x1) /* Japan UNII2 band (5.25-5.35GHz) supported */ +#define AR5K_EEPROM_JAP_MID_EN (((_v) >> 9) & 0x1) /* Japan band from 5.47-5.7GHz supported */ +#define AR5K_EEPROM_JAP_U1ODD_EN (((_v) >> 10) & 0x1) /* Japan UNII2 band (5.15-5.25GHz) on odd channels (5170, 5190, 5210, 5230) supported */ +#define AR5K_EEPROM_JAP_11A_NEW_EN (((_v) >> 11) & 0x1) /* Japan A mode enabled (using even channels) */ + +/* calibration settings */ +#define AR5K_EEPROM_MODES_11A(_v) AR5K_EEPROM_OFF(_v, 0x00c5, 0x00d4) +#define AR5K_EEPROM_MODES_11B(_v) AR5K_EEPROM_OFF(_v, 0x00d0, 0x00f2) +#define AR5K_EEPROM_MODES_11G(_v) AR5K_EEPROM_OFF(_v, 0x00da, 0x010d) +#define AR5K_EEPROM_CTL(_v) AR5K_EEPROM_OFF(_v, 0x00e4, 0x0128) /* Conformance test limits */ +#define AR5K_EEPROM_GROUPS_START(_v) AR5K_EEPROM_OFF(_v, 0x0100, 0x0150) /* Start of Groups */ +#define AR5K_EEPROM_GROUP1_OFFSET 0x0 +#define AR5K_EEPROM_GROUP2_OFFSET 0x5 +#define AR5K_EEPROM_GROUP3_OFFSET 0x37 +#define AR5K_EEPROM_GROUP4_OFFSET 0x46 +#define AR5K_EEPROM_GROUP5_OFFSET 0x55 +#define AR5K_EEPROM_GROUP6_OFFSET 0x65 +#define AR5K_EEPROM_GROUP7_OFFSET 0x69 +#define AR5K_EEPROM_GROUP8_OFFSET 0x6f + +#define AR5K_EEPROM_TARGET_PWR_OFF_11A(_v) AR5K_EEPROM_OFF(_v, AR5K_EEPROM_GROUPS_START(_v) + \ + AR5K_EEPROM_GROUP5_OFFSET, 0x0000) +#define AR5K_EEPROM_TARGET_PWR_OFF_11B(_v) AR5K_EEPROM_OFF(_v, AR5K_EEPROM_GROUPS_START(_v) + \ + AR5K_EEPROM_GROUP6_OFFSET, 0x0010) +#define AR5K_EEPROM_TARGET_PWR_OFF_11G(_v) AR5K_EEPROM_OFF(_v, AR5K_EEPROM_GROUPS_START(_v) + \ + AR5K_EEPROM_GROUP7_OFFSET, 0x0014) + +/* [3.1 - 3.3] */ +#define AR5K_EEPROM_OBDB0_2GHZ 0x00ec +#define AR5K_EEPROM_OBDB1_2GHZ 0x00ed + +#define AR5K_EEPROM_PROTECT 0x003f /* EEPROM protect status */ +#define AR5K_EEPROM_PROTECT_RD_0_31 0x0001 /* Read protection bit for offsets 0x0 - 0x1f */ +#define AR5K_EEPROM_PROTECT_WR_0_31 0x0002 /* Write protection bit for offsets 0x0 - 0x1f */ +#define AR5K_EEPROM_PROTECT_RD_32_63 0x0004 /* 0x20 - 0x3f */ +#define AR5K_EEPROM_PROTECT_WR_32_63 0x0008 +#define AR5K_EEPROM_PROTECT_RD_64_127 0x0010 /* 0x40 - 0x7f */ +#define AR5K_EEPROM_PROTECT_WR_64_127 0x0020 +#define AR5K_EEPROM_PROTECT_RD_128_191 0x0040 /* 0x80 - 0xbf (regdom) */ +#define AR5K_EEPROM_PROTECT_WR_128_191 0x0080 +#define AR5K_EEPROM_PROTECT_RD_192_207 0x0100 /* 0xc0 - 0xcf */ +#define AR5K_EEPROM_PROTECT_WR_192_207 0x0200 +#define AR5K_EEPROM_PROTECT_RD_208_223 0x0400 /* 0xd0 - 0xdf */ +#define AR5K_EEPROM_PROTECT_WR_208_223 0x0800 +#define AR5K_EEPROM_PROTECT_RD_224_239 0x1000 /* 0xe0 - 0xef */ +#define AR5K_EEPROM_PROTECT_WR_224_239 0x2000 +#define AR5K_EEPROM_PROTECT_RD_240_255 0x4000 /* 0xf0 - 0xff */ +#define AR5K_EEPROM_PROTECT_WR_240_255 0x8000 + +/* Some EEPROM defines */ +#define AR5K_EEPROM_EEP_SCALE 100 +#define AR5K_EEPROM_EEP_DELTA 10 +#define AR5K_EEPROM_N_MODES 3 +#define AR5K_EEPROM_N_5GHZ_CHAN 10 +#define AR5K_EEPROM_N_5GHZ_RATE_CHAN 8 +#define AR5K_EEPROM_N_2GHZ_CHAN 3 +#define AR5K_EEPROM_N_2GHZ_CHAN_2413 4 +#define AR5K_EEPROM_N_2GHZ_CHAN_MAX 4 +#define AR5K_EEPROM_MAX_CHAN 10 +#define AR5K_EEPROM_N_PWR_POINTS_5111 11 +#define AR5K_EEPROM_N_PCDAC 11 +#define AR5K_EEPROM_N_PHASE_CAL 5 +#define AR5K_EEPROM_N_TEST_FREQ 8 +#define AR5K_EEPROM_N_EDGES 8 +#define AR5K_EEPROM_N_INTERCEPTS 11 +#define AR5K_EEPROM_FREQ_M(_v) AR5K_EEPROM_OFF(_v, 0x7f, 0xff) +#define AR5K_EEPROM_PCDAC_M 0x3f +#define AR5K_EEPROM_PCDAC_START 1 +#define AR5K_EEPROM_PCDAC_STOP 63 +#define AR5K_EEPROM_PCDAC_STEP 1 +#define AR5K_EEPROM_NON_EDGE_M 0x40 +#define AR5K_EEPROM_CHANNEL_POWER 8 +#define AR5K_EEPROM_N_OBDB 4 +#define AR5K_EEPROM_OBDB_DIS 0xffff +#define AR5K_EEPROM_CHANNEL_DIS 0xff +#define AR5K_EEPROM_SCALE_OC_DELTA(_x) (((_x) * 2) / 10) +#define AR5K_EEPROM_N_CTLS(_v) AR5K_EEPROM_OFF(_v, 16, 32) +#define AR5K_EEPROM_MAX_CTLS 32 +#define AR5K_EEPROM_N_PD_CURVES 4 +#define AR5K_EEPROM_N_XPD0_POINTS 4 +#define AR5K_EEPROM_N_XPD3_POINTS 3 +#define AR5K_EEPROM_N_PD_GAINS 4 +#define AR5K_EEPROM_N_PD_POINTS 5 +#define AR5K_EEPROM_N_INTERCEPT_10_2GHZ 35 +#define AR5K_EEPROM_N_INTERCEPT_10_5GHZ 55 +#define AR5K_EEPROM_POWER_M 0x3f +#define AR5K_EEPROM_POWER_MIN 0 +#define AR5K_EEPROM_POWER_MAX 3150 +#define AR5K_EEPROM_POWER_STEP 50 +#define AR5K_EEPROM_POWER_TABLE_SIZE 64 +#define AR5K_EEPROM_N_POWER_LOC_11B 4 +#define AR5K_EEPROM_N_POWER_LOC_11G 6 +#define AR5K_EEPROM_I_GAIN 10 +#define AR5K_EEPROM_CCK_OFDM_DELTA 15 +#define AR5K_EEPROM_N_IQ_CAL 2 +/* 5GHz/2GHz */ +enum ath5k_eeprom_freq_bands { + AR5K_EEPROM_BAND_5GHZ = 0, + AR5K_EEPROM_BAND_2GHZ = 1, + AR5K_EEPROM_N_FREQ_BANDS, +}; +/* Spur chans per freq band */ +#define AR5K_EEPROM_N_SPUR_CHANS 5 +/* fbin value for chan 2464 x2 */ +#define AR5K_EEPROM_5413_SPUR_CHAN_1 1640 +/* fbin value for chan 2420 x2 */ +#define AR5K_EEPROM_5413_SPUR_CHAN_2 1200 +#define AR5K_EEPROM_SPUR_CHAN_MASK 0x3FFF +#define AR5K_EEPROM_NO_SPUR 0x8000 +#define AR5K_SPUR_CHAN_WIDTH 87 +#define AR5K_SPUR_SYMBOL_WIDTH_BASE_100Hz 3125 +#define AR5K_SPUR_SYMBOL_WIDTH_TURBO_100Hz 6250 + +#define AR5K_EEPROM_READ(_o, _v) do { \ + if (!ath5k_hw_nvram_read(ah, (_o), &(_v))) \ + return -EIO; \ +} while (0) + +#define AR5K_EEPROM_READ_HDR(_o, _v) \ + AR5K_EEPROM_READ(_o, ah->ah_capabilities.cap_eeprom._v); \ + +enum ath5k_ant_table { + AR5K_ANT_CTL = 0, /* Idle switch table settings */ + AR5K_ANT_SWTABLE_A = 1, /* Switch table for antenna A */ + AR5K_ANT_SWTABLE_B = 2, /* Switch table for antenna B */ + AR5K_ANT_MAX, +}; + +enum ath5k_ctl_mode { + AR5K_CTL_11A = 0, + AR5K_CTL_11B = 1, + AR5K_CTL_11G = 2, + AR5K_CTL_TURBO = 3, + AR5K_CTL_TURBOG = 4, + AR5K_CTL_2GHT20 = 5, + AR5K_CTL_5GHT20 = 6, + AR5K_CTL_2GHT40 = 7, + AR5K_CTL_5GHT40 = 8, + AR5K_CTL_MODE_M = 15, +}; + +/* Per channel calibration data, used for power table setup */ +struct ath5k_chan_pcal_info_rf5111 { + /* Power levels in half dBm units + * for one power curve. */ + u8 pwr[AR5K_EEPROM_N_PWR_POINTS_5111]; + /* PCDAC table steps + * for the above values */ + u8 pcdac[AR5K_EEPROM_N_PWR_POINTS_5111]; + /* Starting PCDAC step */ + u8 pcdac_min; + /* Final PCDAC step */ + u8 pcdac_max; +}; + +struct ath5k_chan_pcal_info_rf5112 { + /* Power levels in quarter dBm units + * for lower (0) and higher (3) + * level curves in 0.25dB units */ + s8 pwr_x0[AR5K_EEPROM_N_XPD0_POINTS]; + s8 pwr_x3[AR5K_EEPROM_N_XPD3_POINTS]; + /* PCDAC table steps + * for the above values */ + u8 pcdac_x0[AR5K_EEPROM_N_XPD0_POINTS]; + u8 pcdac_x3[AR5K_EEPROM_N_XPD3_POINTS]; +}; + +struct ath5k_chan_pcal_info_rf2413 { + /* Starting pwr/pddac values */ + s8 pwr_i[AR5K_EEPROM_N_PD_GAINS]; + u8 pddac_i[AR5K_EEPROM_N_PD_GAINS]; + /* (pwr,pddac) points + * power levels in 0.5dB units */ + s8 pwr[AR5K_EEPROM_N_PD_GAINS] + [AR5K_EEPROM_N_PD_POINTS]; + u8 pddac[AR5K_EEPROM_N_PD_GAINS] + [AR5K_EEPROM_N_PD_POINTS]; +}; + +enum ath5k_powertable_type { + AR5K_PWRTABLE_PWR_TO_PCDAC = 0, + AR5K_PWRTABLE_LINEAR_PCDAC = 1, + AR5K_PWRTABLE_PWR_TO_PDADC = 2, +}; + +struct ath5k_pdgain_info { + u8 pd_points; + u8 *pd_step; + /* Power values are in + * 0.25dB units */ + s16 *pd_pwr; +}; + +struct ath5k_chan_pcal_info { + /* Frequency */ + u16 freq; + /* Tx power boundaries */ + s16 max_pwr; + s16 min_pwr; + union { + struct ath5k_chan_pcal_info_rf5111 rf5111_info; + struct ath5k_chan_pcal_info_rf5112 rf5112_info; + struct ath5k_chan_pcal_info_rf2413 rf2413_info; + }; + /* Raw values used by phy code + * Curves are stored in order from lower + * gain to higher gain (max txpower -> min txpower) */ + struct ath5k_pdgain_info *pd_curves; +}; + +/* Per rate calibration data for each mode, + * used for rate power table setup. + * Note: Values in 0.5dB units */ +struct ath5k_rate_pcal_info { + u16 freq; /* Frequency */ + /* Power level for 6-24Mbit/s rates or + * 1Mb rate */ + u16 target_power_6to24; + /* Power level for 36Mbit rate or + * 2Mb rate */ + u16 target_power_36; + /* Power level for 48Mbit rate or + * 5.5Mbit rate */ + u16 target_power_48; + /* Power level for 54Mbit rate or + * 11Mbit rate */ + u16 target_power_54; +}; + +/* Power edges for conformance test limits */ +struct ath5k_edge_power { + u16 freq; + u16 edge; /* in half dBm */ + bool flag; +}; + +/** + * struct ath5k_eeprom_info - EEPROM calibration data + * + * @ee_regdomain: ath/regd.c takes care of COUNTRY_ERD and WORLDWIDE_ROAMING + * flags + * @ee_ant_gain: Antenna gain in 0.5dB steps signed [5211 only?] + * @ee_cck_ofdm_gain_delta: difference in gainF to output the same power for + * OFDM and CCK packets + * @ee_cck_ofdm_power_delta: power difference between OFDM (6Mbps) and CCK + * (11Mbps) rate in G mode. 0.1dB steps + * @ee_scaled_cck_delta: for Japan Channel 14: 0.1dB resolution + * + * @ee_i_cal: Initial I coefficient to correct I/Q mismatch in the receive path + * @ee_q_cal: Initial Q coefficient to correct I/Q mismatch in the receive path + * @ee_fixed_bias: use ee_ob and ee_db settings or use automatic control + * @ee_switch_settling: RX/TX Switch settling time + * @ee_atn_tx_rx: Difference in attenuation between TX and RX in 1dB steps + * @ee_ant_control: Antenna Control Settings + * @ee_ob: Bias current for Output stage of PA + * B/G mode: Index [0] is used for AR2112/5112, otherwise [1] + * A mode: [0] 5.15-5.25 [1] 5.25-5.50 [2] 5.50-5.70 [3] 5.70-5.85 GHz + * @ee_db: Bias current for Output stage of PA. see @ee_ob + * @ee_tx_end2xlna_enable: Time difference from when BB finishes sending a frame + * to when the external LNA is activated + * @ee_tx_end2xpa_disable: Time difference from when BB finishes sending a frame + * to when the external PA switch is deactivated + * @ee_tx_frm2xpa_enable: Time difference from when MAC sends frame to when + * external PA switch is activated + * @ee_thr_62: Clear Channel Assessment (CCA) sensitivity + * (IEEE802.11a section 17.3.10.5 ) + * @ee_xlna_gain: Total gain of the LNA (information only) + * @ee_xpd: Use external (1) or internal power detector + * @ee_x_gain: Gain for external power detector output (differences in EEMAP + * versions!) + * @ee_i_gain: Initial gain value after reset + * @ee_margin_tx_rx: Margin in dB when final attenuation stage should be used + * + * @ee_false_detect: Backoff in Sensitivity (dB) on channels with spur signals + * @ee_noise_floor_thr: Noise floor threshold in 1dB steps + * @ee_adc_desired_size: Desired amplitude for ADC, used by AGC; in 0.5 dB steps + * @ee_pga_desired_size: Desired output of PGA (for BB gain) in 0.5 dB steps + * @ee_pd_gain_overlap: PD ADC curves need to overlap in 0.5dB steps (ee_map>=2) + */ +struct ath5k_eeprom_info { + + /* Header information */ + u16 ee_magic; + u16 ee_protect; + u16 ee_regdomain; + u16 ee_version; + u16 ee_header; + u16 ee_ant_gain; + u8 ee_rfkill_pin; + bool ee_rfkill_pol; + bool ee_is_hb63; + bool ee_serdes; + u16 ee_misc0; + u16 ee_misc1; + u16 ee_misc2; + u16 ee_misc3; + u16 ee_misc4; + u16 ee_misc5; + u16 ee_misc6; + u16 ee_cck_ofdm_gain_delta; + u16 ee_cck_ofdm_power_delta; + u16 ee_scaled_cck_delta; + + /* RF Calibration settings (reset, rfregs) */ + u16 ee_i_cal[AR5K_EEPROM_N_MODES]; + u16 ee_q_cal[AR5K_EEPROM_N_MODES]; + u16 ee_fixed_bias[AR5K_EEPROM_N_MODES]; + u16 ee_turbo_max_power[AR5K_EEPROM_N_MODES]; + u16 ee_xr_power[AR5K_EEPROM_N_MODES]; + u16 ee_switch_settling[AR5K_EEPROM_N_MODES]; + u16 ee_atn_tx_rx[AR5K_EEPROM_N_MODES]; + u16 ee_ant_control[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_PCDAC]; + u16 ee_ob[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_OBDB]; + u16 ee_db[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_OBDB]; + u16 ee_tx_end2xlna_enable[AR5K_EEPROM_N_MODES]; + u16 ee_tx_end2xpa_disable[AR5K_EEPROM_N_MODES]; + u16 ee_tx_frm2xpa_enable[AR5K_EEPROM_N_MODES]; + u16 ee_thr_62[AR5K_EEPROM_N_MODES]; + u16 ee_xlna_gain[AR5K_EEPROM_N_MODES]; + u16 ee_xpd[AR5K_EEPROM_N_MODES]; + u16 ee_x_gain[AR5K_EEPROM_N_MODES]; + u16 ee_i_gain[AR5K_EEPROM_N_MODES]; + u16 ee_margin_tx_rx[AR5K_EEPROM_N_MODES]; + u16 ee_switch_settling_turbo[AR5K_EEPROM_N_MODES]; + u16 ee_margin_tx_rx_turbo[AR5K_EEPROM_N_MODES]; + u16 ee_atn_tx_rx_turbo[AR5K_EEPROM_N_MODES]; + + /* Power calibration data */ + u16 ee_false_detect[AR5K_EEPROM_N_MODES]; + + /* Number of pd gain curves per mode */ + u8 ee_pd_gains[AR5K_EEPROM_N_MODES]; + /* Back mapping pdcurve number -> pdcurve index in pd->pd_curves */ + u8 ee_pdc_to_idx[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_PD_GAINS]; + + u8 ee_n_piers[AR5K_EEPROM_N_MODES]; + struct ath5k_chan_pcal_info ee_pwr_cal_a[AR5K_EEPROM_N_5GHZ_CHAN]; + struct ath5k_chan_pcal_info ee_pwr_cal_b[AR5K_EEPROM_N_2GHZ_CHAN_MAX]; + struct ath5k_chan_pcal_info ee_pwr_cal_g[AR5K_EEPROM_N_2GHZ_CHAN_MAX]; + + /* Per rate target power levels */ + u8 ee_rate_target_pwr_num[AR5K_EEPROM_N_MODES]; + struct ath5k_rate_pcal_info ee_rate_tpwr_a[AR5K_EEPROM_N_5GHZ_CHAN]; + struct ath5k_rate_pcal_info ee_rate_tpwr_b[AR5K_EEPROM_N_2GHZ_CHAN_MAX]; + struct ath5k_rate_pcal_info ee_rate_tpwr_g[AR5K_EEPROM_N_2GHZ_CHAN_MAX]; + + /* Conformance test limits (Unused) */ + u8 ee_ctls; + u8 ee_ctl[AR5K_EEPROM_MAX_CTLS]; + struct ath5k_edge_power ee_ctl_pwr[AR5K_EEPROM_N_EDGES * AR5K_EEPROM_MAX_CTLS]; + + /* Noise Floor Calibration settings */ + s16 ee_noise_floor_thr[AR5K_EEPROM_N_MODES]; + s8 ee_adc_desired_size[AR5K_EEPROM_N_MODES]; + s8 ee_pga_desired_size[AR5K_EEPROM_N_MODES]; + s8 ee_adc_desired_size_turbo[AR5K_EEPROM_N_MODES]; + s8 ee_pga_desired_size_turbo[AR5K_EEPROM_N_MODES]; + s8 ee_pd_gain_overlap; + + /* Spur mitigation data (fbin values for spur channels) */ + u16 ee_spur_chans[AR5K_EEPROM_N_SPUR_CHANS][AR5K_EEPROM_N_FREQ_BANDS]; + + /* Antenna raw switch tables */ + u32 ee_antenna[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX]; +}; |