summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/net/wireless/ath/ath5k/base.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/net/wireless/ath/ath5k/base.c')
-rw-r--r--kernel/drivers/net/wireless/ath/ath5k/base.c3205
1 files changed, 3205 insertions, 0 deletions
diff --git a/kernel/drivers/net/wireless/ath/ath5k/base.c b/kernel/drivers/net/wireless/ath/ath5k/base.c
new file mode 100644
index 000000000..a6131825c
--- /dev/null
+++ b/kernel/drivers/net/wireless/ath/ath5k/base.c
@@ -0,0 +1,3205 @@
+/*-
+ * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting
+ * Copyright (c) 2004-2005 Atheros Communications, Inc.
+ * Copyright (c) 2006 Devicescape Software, Inc.
+ * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com>
+ * Copyright (c) 2007 Luis R. Rodriguez <mcgrof@winlab.rutgers.edu>
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
+ * redistribution must be conditioned upon including a substantially
+ * similar Disclaimer requirement for further binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
+ * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
+ * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
+ * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ * THE POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/hardirq.h>
+#include <linux/if.h>
+#include <linux/io.h>
+#include <linux/netdevice.h>
+#include <linux/cache.h>
+#include <linux/ethtool.h>
+#include <linux/uaccess.h>
+#include <linux/slab.h>
+#include <linux/etherdevice.h>
+#include <linux/nl80211.h>
+
+#include <net/cfg80211.h>
+#include <net/ieee80211_radiotap.h>
+
+#include <asm/unaligned.h>
+
+#include <net/mac80211.h>
+#include "base.h"
+#include "reg.h"
+#include "debug.h"
+#include "ani.h"
+#include "ath5k.h"
+#include "../regd.h"
+
+#define CREATE_TRACE_POINTS
+#include "trace.h"
+
+bool ath5k_modparam_nohwcrypt;
+module_param_named(nohwcrypt, ath5k_modparam_nohwcrypt, bool, S_IRUGO);
+MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
+
+static bool modparam_fastchanswitch;
+module_param_named(fastchanswitch, modparam_fastchanswitch, bool, S_IRUGO);
+MODULE_PARM_DESC(fastchanswitch, "Enable fast channel switching for AR2413/AR5413 radios.");
+
+static bool ath5k_modparam_no_hw_rfkill_switch;
+module_param_named(no_hw_rfkill_switch, ath5k_modparam_no_hw_rfkill_switch,
+ bool, S_IRUGO);
+MODULE_PARM_DESC(no_hw_rfkill_switch, "Ignore the GPIO RFKill switch state");
+
+
+/* Module info */
+MODULE_AUTHOR("Jiri Slaby");
+MODULE_AUTHOR("Nick Kossifidis");
+MODULE_DESCRIPTION("Support for 5xxx series of Atheros 802.11 wireless LAN cards.");
+MODULE_SUPPORTED_DEVICE("Atheros 5xxx WLAN cards");
+MODULE_LICENSE("Dual BSD/GPL");
+
+static int ath5k_init(struct ieee80211_hw *hw);
+static int ath5k_reset(struct ath5k_hw *ah, struct ieee80211_channel *chan,
+ bool skip_pcu);
+
+/* Known SREVs */
+static const struct ath5k_srev_name srev_names[] = {
+#ifdef CONFIG_ATH5K_AHB
+ { "5312", AR5K_VERSION_MAC, AR5K_SREV_AR5312_R2 },
+ { "5312", AR5K_VERSION_MAC, AR5K_SREV_AR5312_R7 },
+ { "2313", AR5K_VERSION_MAC, AR5K_SREV_AR2313_R8 },
+ { "2315", AR5K_VERSION_MAC, AR5K_SREV_AR2315_R6 },
+ { "2315", AR5K_VERSION_MAC, AR5K_SREV_AR2315_R7 },
+ { "2317", AR5K_VERSION_MAC, AR5K_SREV_AR2317_R1 },
+ { "2317", AR5K_VERSION_MAC, AR5K_SREV_AR2317_R2 },
+#else
+ { "5210", AR5K_VERSION_MAC, AR5K_SREV_AR5210 },
+ { "5311", AR5K_VERSION_MAC, AR5K_SREV_AR5311 },
+ { "5311A", AR5K_VERSION_MAC, AR5K_SREV_AR5311A },
+ { "5311B", AR5K_VERSION_MAC, AR5K_SREV_AR5311B },
+ { "5211", AR5K_VERSION_MAC, AR5K_SREV_AR5211 },
+ { "5212", AR5K_VERSION_MAC, AR5K_SREV_AR5212 },
+ { "5213", AR5K_VERSION_MAC, AR5K_SREV_AR5213 },
+ { "5213A", AR5K_VERSION_MAC, AR5K_SREV_AR5213A },
+ { "2413", AR5K_VERSION_MAC, AR5K_SREV_AR2413 },
+ { "2414", AR5K_VERSION_MAC, AR5K_SREV_AR2414 },
+ { "5424", AR5K_VERSION_MAC, AR5K_SREV_AR5424 },
+ { "5413", AR5K_VERSION_MAC, AR5K_SREV_AR5413 },
+ { "5414", AR5K_VERSION_MAC, AR5K_SREV_AR5414 },
+ { "2415", AR5K_VERSION_MAC, AR5K_SREV_AR2415 },
+ { "5416", AR5K_VERSION_MAC, AR5K_SREV_AR5416 },
+ { "5418", AR5K_VERSION_MAC, AR5K_SREV_AR5418 },
+ { "2425", AR5K_VERSION_MAC, AR5K_SREV_AR2425 },
+ { "2417", AR5K_VERSION_MAC, AR5K_SREV_AR2417 },
+#endif
+ { "xxxxx", AR5K_VERSION_MAC, AR5K_SREV_UNKNOWN },
+ { "5110", AR5K_VERSION_RAD, AR5K_SREV_RAD_5110 },
+ { "5111", AR5K_VERSION_RAD, AR5K_SREV_RAD_5111 },
+ { "5111A", AR5K_VERSION_RAD, AR5K_SREV_RAD_5111A },
+ { "2111", AR5K_VERSION_RAD, AR5K_SREV_RAD_2111 },
+ { "5112", AR5K_VERSION_RAD, AR5K_SREV_RAD_5112 },
+ { "5112A", AR5K_VERSION_RAD, AR5K_SREV_RAD_5112A },
+ { "5112B", AR5K_VERSION_RAD, AR5K_SREV_RAD_5112B },
+ { "2112", AR5K_VERSION_RAD, AR5K_SREV_RAD_2112 },
+ { "2112A", AR5K_VERSION_RAD, AR5K_SREV_RAD_2112A },
+ { "2112B", AR5K_VERSION_RAD, AR5K_SREV_RAD_2112B },
+ { "2413", AR5K_VERSION_RAD, AR5K_SREV_RAD_2413 },
+ { "5413", AR5K_VERSION_RAD, AR5K_SREV_RAD_5413 },
+ { "5424", AR5K_VERSION_RAD, AR5K_SREV_RAD_5424 },
+ { "5133", AR5K_VERSION_RAD, AR5K_SREV_RAD_5133 },
+#ifdef CONFIG_ATH5K_AHB
+ { "2316", AR5K_VERSION_RAD, AR5K_SREV_RAD_2316 },
+ { "2317", AR5K_VERSION_RAD, AR5K_SREV_RAD_2317 },
+#endif
+ { "xxxxx", AR5K_VERSION_RAD, AR5K_SREV_UNKNOWN },
+};
+
+static const struct ieee80211_rate ath5k_rates[] = {
+ { .bitrate = 10,
+ .hw_value = ATH5K_RATE_CODE_1M, },
+ { .bitrate = 20,
+ .hw_value = ATH5K_RATE_CODE_2M,
+ .hw_value_short = ATH5K_RATE_CODE_2M | AR5K_SET_SHORT_PREAMBLE,
+ .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+ { .bitrate = 55,
+ .hw_value = ATH5K_RATE_CODE_5_5M,
+ .hw_value_short = ATH5K_RATE_CODE_5_5M | AR5K_SET_SHORT_PREAMBLE,
+ .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+ { .bitrate = 110,
+ .hw_value = ATH5K_RATE_CODE_11M,
+ .hw_value_short = ATH5K_RATE_CODE_11M | AR5K_SET_SHORT_PREAMBLE,
+ .flags = IEEE80211_RATE_SHORT_PREAMBLE },
+ { .bitrate = 60,
+ .hw_value = ATH5K_RATE_CODE_6M,
+ .flags = IEEE80211_RATE_SUPPORTS_5MHZ |
+ IEEE80211_RATE_SUPPORTS_10MHZ },
+ { .bitrate = 90,
+ .hw_value = ATH5K_RATE_CODE_9M,
+ .flags = IEEE80211_RATE_SUPPORTS_5MHZ |
+ IEEE80211_RATE_SUPPORTS_10MHZ },
+ { .bitrate = 120,
+ .hw_value = ATH5K_RATE_CODE_12M,
+ .flags = IEEE80211_RATE_SUPPORTS_5MHZ |
+ IEEE80211_RATE_SUPPORTS_10MHZ },
+ { .bitrate = 180,
+ .hw_value = ATH5K_RATE_CODE_18M,
+ .flags = IEEE80211_RATE_SUPPORTS_5MHZ |
+ IEEE80211_RATE_SUPPORTS_10MHZ },
+ { .bitrate = 240,
+ .hw_value = ATH5K_RATE_CODE_24M,
+ .flags = IEEE80211_RATE_SUPPORTS_5MHZ |
+ IEEE80211_RATE_SUPPORTS_10MHZ },
+ { .bitrate = 360,
+ .hw_value = ATH5K_RATE_CODE_36M,
+ .flags = IEEE80211_RATE_SUPPORTS_5MHZ |
+ IEEE80211_RATE_SUPPORTS_10MHZ },
+ { .bitrate = 480,
+ .hw_value = ATH5K_RATE_CODE_48M,
+ .flags = IEEE80211_RATE_SUPPORTS_5MHZ |
+ IEEE80211_RATE_SUPPORTS_10MHZ },
+ { .bitrate = 540,
+ .hw_value = ATH5K_RATE_CODE_54M,
+ .flags = IEEE80211_RATE_SUPPORTS_5MHZ |
+ IEEE80211_RATE_SUPPORTS_10MHZ },
+};
+
+static inline u64 ath5k_extend_tsf(struct ath5k_hw *ah, u32 rstamp)
+{
+ u64 tsf = ath5k_hw_get_tsf64(ah);
+
+ if ((tsf & 0x7fff) < rstamp)
+ tsf -= 0x8000;
+
+ return (tsf & ~0x7fff) | rstamp;
+}
+
+const char *
+ath5k_chip_name(enum ath5k_srev_type type, u_int16_t val)
+{
+ const char *name = "xxxxx";
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(srev_names); i++) {
+ if (srev_names[i].sr_type != type)
+ continue;
+
+ if ((val & 0xf0) == srev_names[i].sr_val)
+ name = srev_names[i].sr_name;
+
+ if ((val & 0xff) == srev_names[i].sr_val) {
+ name = srev_names[i].sr_name;
+ break;
+ }
+ }
+
+ return name;
+}
+static unsigned int ath5k_ioread32(void *hw_priv, u32 reg_offset)
+{
+ struct ath5k_hw *ah = (struct ath5k_hw *) hw_priv;
+ return ath5k_hw_reg_read(ah, reg_offset);
+}
+
+static void ath5k_iowrite32(void *hw_priv, u32 val, u32 reg_offset)
+{
+ struct ath5k_hw *ah = (struct ath5k_hw *) hw_priv;
+ ath5k_hw_reg_write(ah, val, reg_offset);
+}
+
+static const struct ath_ops ath5k_common_ops = {
+ .read = ath5k_ioread32,
+ .write = ath5k_iowrite32,
+};
+
+/***********************\
+* Driver Initialization *
+\***********************/
+
+static void ath5k_reg_notifier(struct wiphy *wiphy,
+ struct regulatory_request *request)
+{
+ struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
+ struct ath5k_hw *ah = hw->priv;
+ struct ath_regulatory *regulatory = ath5k_hw_regulatory(ah);
+
+ ath_reg_notifier_apply(wiphy, request, regulatory);
+}
+
+/********************\
+* Channel/mode setup *
+\********************/
+
+/*
+ * Returns true for the channel numbers used.
+ */
+#ifdef CONFIG_ATH5K_TEST_CHANNELS
+static bool ath5k_is_standard_channel(short chan, enum ieee80211_band band)
+{
+ return true;
+}
+
+#else
+static bool ath5k_is_standard_channel(short chan, enum ieee80211_band band)
+{
+ if (band == IEEE80211_BAND_2GHZ && chan <= 14)
+ return true;
+
+ return /* UNII 1,2 */
+ (((chan & 3) == 0 && chan >= 36 && chan <= 64) ||
+ /* midband */
+ ((chan & 3) == 0 && chan >= 100 && chan <= 140) ||
+ /* UNII-3 */
+ ((chan & 3) == 1 && chan >= 149 && chan <= 165) ||
+ /* 802.11j 5.030-5.080 GHz (20MHz) */
+ (chan == 8 || chan == 12 || chan == 16) ||
+ /* 802.11j 4.9GHz (20MHz) */
+ (chan == 184 || chan == 188 || chan == 192 || chan == 196));
+}
+#endif
+
+static unsigned int
+ath5k_setup_channels(struct ath5k_hw *ah, struct ieee80211_channel *channels,
+ unsigned int mode, unsigned int max)
+{
+ unsigned int count, size, freq, ch;
+ enum ieee80211_band band;
+
+ switch (mode) {
+ case AR5K_MODE_11A:
+ /* 1..220, but 2GHz frequencies are filtered by check_channel */
+ size = 220;
+ band = IEEE80211_BAND_5GHZ;
+ break;
+ case AR5K_MODE_11B:
+ case AR5K_MODE_11G:
+ size = 26;
+ band = IEEE80211_BAND_2GHZ;
+ break;
+ default:
+ ATH5K_WARN(ah, "bad mode, not copying channels\n");
+ return 0;
+ }
+
+ count = 0;
+ for (ch = 1; ch <= size && count < max; ch++) {
+ freq = ieee80211_channel_to_frequency(ch, band);
+
+ if (freq == 0) /* mapping failed - not a standard channel */
+ continue;
+
+ /* Write channel info, needed for ath5k_channel_ok() */
+ channels[count].center_freq = freq;
+ channels[count].band = band;
+ channels[count].hw_value = mode;
+
+ /* Check if channel is supported by the chipset */
+ if (!ath5k_channel_ok(ah, &channels[count]))
+ continue;
+
+ if (!ath5k_is_standard_channel(ch, band))
+ continue;
+
+ count++;
+ }
+
+ return count;
+}
+
+static void
+ath5k_setup_rate_idx(struct ath5k_hw *ah, struct ieee80211_supported_band *b)
+{
+ u8 i;
+
+ for (i = 0; i < AR5K_MAX_RATES; i++)
+ ah->rate_idx[b->band][i] = -1;
+
+ for (i = 0; i < b->n_bitrates; i++) {
+ ah->rate_idx[b->band][b->bitrates[i].hw_value] = i;
+ if (b->bitrates[i].hw_value_short)
+ ah->rate_idx[b->band][b->bitrates[i].hw_value_short] = i;
+ }
+}
+
+static int
+ath5k_setup_bands(struct ieee80211_hw *hw)
+{
+ struct ath5k_hw *ah = hw->priv;
+ struct ieee80211_supported_band *sband;
+ int max_c, count_c = 0;
+ int i;
+
+ BUILD_BUG_ON(ARRAY_SIZE(ah->sbands) < IEEE80211_NUM_BANDS);
+ max_c = ARRAY_SIZE(ah->channels);
+
+ /* 2GHz band */
+ sband = &ah->sbands[IEEE80211_BAND_2GHZ];
+ sband->band = IEEE80211_BAND_2GHZ;
+ sband->bitrates = &ah->rates[IEEE80211_BAND_2GHZ][0];
+
+ if (test_bit(AR5K_MODE_11G, ah->ah_capabilities.cap_mode)) {
+ /* G mode */
+ memcpy(sband->bitrates, &ath5k_rates[0],
+ sizeof(struct ieee80211_rate) * 12);
+ sband->n_bitrates = 12;
+
+ sband->channels = ah->channels;
+ sband->n_channels = ath5k_setup_channels(ah, sband->channels,
+ AR5K_MODE_11G, max_c);
+
+ hw->wiphy->bands[IEEE80211_BAND_2GHZ] = sband;
+ count_c = sband->n_channels;
+ max_c -= count_c;
+ } else if (test_bit(AR5K_MODE_11B, ah->ah_capabilities.cap_mode)) {
+ /* B mode */
+ memcpy(sband->bitrates, &ath5k_rates[0],
+ sizeof(struct ieee80211_rate) * 4);
+ sband->n_bitrates = 4;
+
+ /* 5211 only supports B rates and uses 4bit rate codes
+ * (e.g normally we have 0x1B for 1M, but on 5211 we have 0x0B)
+ * fix them up here:
+ */
+ if (ah->ah_version == AR5K_AR5211) {
+ for (i = 0; i < 4; i++) {
+ sband->bitrates[i].hw_value =
+ sband->bitrates[i].hw_value & 0xF;
+ sband->bitrates[i].hw_value_short =
+ sband->bitrates[i].hw_value_short & 0xF;
+ }
+ }
+
+ sband->channels = ah->channels;
+ sband->n_channels = ath5k_setup_channels(ah, sband->channels,
+ AR5K_MODE_11B, max_c);
+
+ hw->wiphy->bands[IEEE80211_BAND_2GHZ] = sband;
+ count_c = sband->n_channels;
+ max_c -= count_c;
+ }
+ ath5k_setup_rate_idx(ah, sband);
+
+ /* 5GHz band, A mode */
+ if (test_bit(AR5K_MODE_11A, ah->ah_capabilities.cap_mode)) {
+ sband = &ah->sbands[IEEE80211_BAND_5GHZ];
+ sband->band = IEEE80211_BAND_5GHZ;
+ sband->bitrates = &ah->rates[IEEE80211_BAND_5GHZ][0];
+
+ memcpy(sband->bitrates, &ath5k_rates[4],
+ sizeof(struct ieee80211_rate) * 8);
+ sband->n_bitrates = 8;
+
+ sband->channels = &ah->channels[count_c];
+ sband->n_channels = ath5k_setup_channels(ah, sband->channels,
+ AR5K_MODE_11A, max_c);
+
+ hw->wiphy->bands[IEEE80211_BAND_5GHZ] = sband;
+ }
+ ath5k_setup_rate_idx(ah, sband);
+
+ ath5k_debug_dump_bands(ah);
+
+ return 0;
+}
+
+/*
+ * Set/change channels. We always reset the chip.
+ * To accomplish this we must first cleanup any pending DMA,
+ * then restart stuff after a la ath5k_init.
+ *
+ * Called with ah->lock.
+ */
+int
+ath5k_chan_set(struct ath5k_hw *ah, struct cfg80211_chan_def *chandef)
+{
+ ATH5K_DBG(ah, ATH5K_DEBUG_RESET,
+ "channel set, resetting (%u -> %u MHz)\n",
+ ah->curchan->center_freq, chandef->chan->center_freq);
+
+ switch (chandef->width) {
+ case NL80211_CHAN_WIDTH_20:
+ case NL80211_CHAN_WIDTH_20_NOHT:
+ ah->ah_bwmode = AR5K_BWMODE_DEFAULT;
+ break;
+ case NL80211_CHAN_WIDTH_5:
+ ah->ah_bwmode = AR5K_BWMODE_5MHZ;
+ break;
+ case NL80211_CHAN_WIDTH_10:
+ ah->ah_bwmode = AR5K_BWMODE_10MHZ;
+ break;
+ default:
+ WARN_ON(1);
+ return -EINVAL;
+ }
+
+ /*
+ * To switch channels clear any pending DMA operations;
+ * wait long enough for the RX fifo to drain, reset the
+ * hardware at the new frequency, and then re-enable
+ * the relevant bits of the h/w.
+ */
+ return ath5k_reset(ah, chandef->chan, true);
+}
+
+void ath5k_vif_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
+{
+ struct ath5k_vif_iter_data *iter_data = data;
+ int i;
+ struct ath5k_vif *avf = (void *)vif->drv_priv;
+
+ if (iter_data->hw_macaddr)
+ for (i = 0; i < ETH_ALEN; i++)
+ iter_data->mask[i] &=
+ ~(iter_data->hw_macaddr[i] ^ mac[i]);
+
+ if (!iter_data->found_active) {
+ iter_data->found_active = true;
+ memcpy(iter_data->active_mac, mac, ETH_ALEN);
+ }
+
+ if (iter_data->need_set_hw_addr && iter_data->hw_macaddr)
+ if (ether_addr_equal(iter_data->hw_macaddr, mac))
+ iter_data->need_set_hw_addr = false;
+
+ if (!iter_data->any_assoc) {
+ if (avf->assoc)
+ iter_data->any_assoc = true;
+ }
+
+ /* Calculate combined mode - when APs are active, operate in AP mode.
+ * Otherwise use the mode of the new interface. This can currently
+ * only deal with combinations of APs and STAs. Only one ad-hoc
+ * interfaces is allowed.
+ */
+ if (avf->opmode == NL80211_IFTYPE_AP)
+ iter_data->opmode = NL80211_IFTYPE_AP;
+ else {
+ if (avf->opmode == NL80211_IFTYPE_STATION)
+ iter_data->n_stas++;
+ if (iter_data->opmode == NL80211_IFTYPE_UNSPECIFIED)
+ iter_data->opmode = avf->opmode;
+ }
+}
+
+void
+ath5k_update_bssid_mask_and_opmode(struct ath5k_hw *ah,
+ struct ieee80211_vif *vif)
+{
+ struct ath_common *common = ath5k_hw_common(ah);
+ struct ath5k_vif_iter_data iter_data;
+ u32 rfilt;
+
+ /*
+ * Use the hardware MAC address as reference, the hardware uses it
+ * together with the BSSID mask when matching addresses.
+ */
+ iter_data.hw_macaddr = common->macaddr;
+ eth_broadcast_addr(iter_data.mask);
+ iter_data.found_active = false;
+ iter_data.need_set_hw_addr = true;
+ iter_data.opmode = NL80211_IFTYPE_UNSPECIFIED;
+ iter_data.n_stas = 0;
+
+ if (vif)
+ ath5k_vif_iter(&iter_data, vif->addr, vif);
+
+ /* Get list of all active MAC addresses */
+ ieee80211_iterate_active_interfaces_atomic(
+ ah->hw, IEEE80211_IFACE_ITER_RESUME_ALL,
+ ath5k_vif_iter, &iter_data);
+ memcpy(ah->bssidmask, iter_data.mask, ETH_ALEN);
+
+ ah->opmode = iter_data.opmode;
+ if (ah->opmode == NL80211_IFTYPE_UNSPECIFIED)
+ /* Nothing active, default to station mode */
+ ah->opmode = NL80211_IFTYPE_STATION;
+
+ ath5k_hw_set_opmode(ah, ah->opmode);
+ ATH5K_DBG(ah, ATH5K_DEBUG_MODE, "mode setup opmode %d (%s)\n",
+ ah->opmode, ath_opmode_to_string(ah->opmode));
+
+ if (iter_data.need_set_hw_addr && iter_data.found_active)
+ ath5k_hw_set_lladdr(ah, iter_data.active_mac);
+
+ if (ath5k_hw_hasbssidmask(ah))
+ ath5k_hw_set_bssid_mask(ah, ah->bssidmask);
+
+ /* Set up RX Filter */
+ if (iter_data.n_stas > 1) {
+ /* If you have multiple STA interfaces connected to
+ * different APs, ARPs are not received (most of the time?)
+ * Enabling PROMISC appears to fix that problem.
+ */
+ ah->filter_flags |= AR5K_RX_FILTER_PROM;
+ }
+
+ rfilt = ah->filter_flags;
+ ath5k_hw_set_rx_filter(ah, rfilt);
+ ATH5K_DBG(ah, ATH5K_DEBUG_MODE, "RX filter 0x%x\n", rfilt);
+}
+
+static inline int
+ath5k_hw_to_driver_rix(struct ath5k_hw *ah, int hw_rix)
+{
+ int rix;
+
+ /* return base rate on errors */
+ if (WARN(hw_rix < 0 || hw_rix >= AR5K_MAX_RATES,
+ "hw_rix out of bounds: %x\n", hw_rix))
+ return 0;
+
+ rix = ah->rate_idx[ah->curchan->band][hw_rix];
+ if (WARN(rix < 0, "invalid hw_rix: %x\n", hw_rix))
+ rix = 0;
+
+ return rix;
+}
+
+/***************\
+* Buffers setup *
+\***************/
+
+static
+struct sk_buff *ath5k_rx_skb_alloc(struct ath5k_hw *ah, dma_addr_t *skb_addr)
+{
+ struct ath_common *common = ath5k_hw_common(ah);
+ struct sk_buff *skb;
+
+ /*
+ * Allocate buffer with headroom_needed space for the
+ * fake physical layer header at the start.
+ */
+ skb = ath_rxbuf_alloc(common,
+ common->rx_bufsize,
+ GFP_ATOMIC);
+
+ if (!skb) {
+ ATH5K_ERR(ah, "can't alloc skbuff of size %u\n",
+ common->rx_bufsize);
+ return NULL;
+ }
+
+ *skb_addr = dma_map_single(ah->dev,
+ skb->data, common->rx_bufsize,
+ DMA_FROM_DEVICE);
+
+ if (unlikely(dma_mapping_error(ah->dev, *skb_addr))) {
+ ATH5K_ERR(ah, "%s: DMA mapping failed\n", __func__);
+ dev_kfree_skb(skb);
+ return NULL;
+ }
+ return skb;
+}
+
+static int
+ath5k_rxbuf_setup(struct ath5k_hw *ah, struct ath5k_buf *bf)
+{
+ struct sk_buff *skb = bf->skb;
+ struct ath5k_desc *ds;
+ int ret;
+
+ if (!skb) {
+ skb = ath5k_rx_skb_alloc(ah, &bf->skbaddr);
+ if (!skb)
+ return -ENOMEM;
+ bf->skb = skb;
+ }
+
+ /*
+ * Setup descriptors. For receive we always terminate
+ * the descriptor list with a self-linked entry so we'll
+ * not get overrun under high load (as can happen with a
+ * 5212 when ANI processing enables PHY error frames).
+ *
+ * To ensure the last descriptor is self-linked we create
+ * each descriptor as self-linked and add it to the end. As
+ * each additional descriptor is added the previous self-linked
+ * entry is "fixed" naturally. This should be safe even
+ * if DMA is happening. When processing RX interrupts we
+ * never remove/process the last, self-linked, entry on the
+ * descriptor list. This ensures the hardware always has
+ * someplace to write a new frame.
+ */
+ ds = bf->desc;
+ ds->ds_link = bf->daddr; /* link to self */
+ ds->ds_data = bf->skbaddr;
+ ret = ath5k_hw_setup_rx_desc(ah, ds, ah->common.rx_bufsize, 0);
+ if (ret) {
+ ATH5K_ERR(ah, "%s: could not setup RX desc\n", __func__);
+ return ret;
+ }
+
+ if (ah->rxlink != NULL)
+ *ah->rxlink = bf->daddr;
+ ah->rxlink = &ds->ds_link;
+ return 0;
+}
+
+static enum ath5k_pkt_type get_hw_packet_type(struct sk_buff *skb)
+{
+ struct ieee80211_hdr *hdr;
+ enum ath5k_pkt_type htype;
+ __le16 fc;
+
+ hdr = (struct ieee80211_hdr *)skb->data;
+ fc = hdr->frame_control;
+
+ if (ieee80211_is_beacon(fc))
+ htype = AR5K_PKT_TYPE_BEACON;
+ else if (ieee80211_is_probe_resp(fc))
+ htype = AR5K_PKT_TYPE_PROBE_RESP;
+ else if (ieee80211_is_atim(fc))
+ htype = AR5K_PKT_TYPE_ATIM;
+ else if (ieee80211_is_pspoll(fc))
+ htype = AR5K_PKT_TYPE_PSPOLL;
+ else
+ htype = AR5K_PKT_TYPE_NORMAL;
+
+ return htype;
+}
+
+static struct ieee80211_rate *
+ath5k_get_rate(const struct ieee80211_hw *hw,
+ const struct ieee80211_tx_info *info,
+ struct ath5k_buf *bf, int idx)
+{
+ /*
+ * convert a ieee80211_tx_rate RC-table entry to
+ * the respective ieee80211_rate struct
+ */
+ if (bf->rates[idx].idx < 0) {
+ return NULL;
+ }
+
+ return &hw->wiphy->bands[info->band]->bitrates[ bf->rates[idx].idx ];
+}
+
+static u16
+ath5k_get_rate_hw_value(const struct ieee80211_hw *hw,
+ const struct ieee80211_tx_info *info,
+ struct ath5k_buf *bf, int idx)
+{
+ struct ieee80211_rate *rate;
+ u16 hw_rate;
+ u8 rc_flags;
+
+ rate = ath5k_get_rate(hw, info, bf, idx);
+ if (!rate)
+ return 0;
+
+ rc_flags = bf->rates[idx].flags;
+ hw_rate = (rc_flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) ?
+ rate->hw_value_short : rate->hw_value;
+
+ return hw_rate;
+}
+
+static int
+ath5k_txbuf_setup(struct ath5k_hw *ah, struct ath5k_buf *bf,
+ struct ath5k_txq *txq, int padsize,
+ struct ieee80211_tx_control *control)
+{
+ struct ath5k_desc *ds = bf->desc;
+ struct sk_buff *skb = bf->skb;
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ unsigned int pktlen, flags, keyidx = AR5K_TXKEYIX_INVALID;
+ struct ieee80211_rate *rate;
+ unsigned int mrr_rate[3], mrr_tries[3];
+ int i, ret;
+ u16 hw_rate;
+ u16 cts_rate = 0;
+ u16 duration = 0;
+ u8 rc_flags;
+
+ flags = AR5K_TXDESC_INTREQ | AR5K_TXDESC_CLRDMASK;
+
+ /* XXX endianness */
+ bf->skbaddr = dma_map_single(ah->dev, skb->data, skb->len,
+ DMA_TO_DEVICE);
+
+ if (dma_mapping_error(ah->dev, bf->skbaddr))
+ return -ENOSPC;
+
+ ieee80211_get_tx_rates(info->control.vif, (control) ? control->sta : NULL, skb, bf->rates,
+ ARRAY_SIZE(bf->rates));
+
+ rate = ath5k_get_rate(ah->hw, info, bf, 0);
+
+ if (!rate) {
+ ret = -EINVAL;
+ goto err_unmap;
+ }
+
+ if (info->flags & IEEE80211_TX_CTL_NO_ACK)
+ flags |= AR5K_TXDESC_NOACK;
+
+ rc_flags = info->control.rates[0].flags;
+
+ hw_rate = ath5k_get_rate_hw_value(ah->hw, info, bf, 0);
+
+ pktlen = skb->len;
+
+ /* FIXME: If we are in g mode and rate is a CCK rate
+ * subtract ah->ah_txpower.txp_cck_ofdm_pwr_delta
+ * from tx power (value is in dB units already) */
+ if (info->control.hw_key) {
+ keyidx = info->control.hw_key->hw_key_idx;
+ pktlen += info->control.hw_key->icv_len;
+ }
+ if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS) {
+ flags |= AR5K_TXDESC_RTSENA;
+ cts_rate = ieee80211_get_rts_cts_rate(ah->hw, info)->hw_value;
+ duration = le16_to_cpu(ieee80211_rts_duration(ah->hw,
+ info->control.vif, pktlen, info));
+ }
+ if (rc_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
+ flags |= AR5K_TXDESC_CTSENA;
+ cts_rate = ieee80211_get_rts_cts_rate(ah->hw, info)->hw_value;
+ duration = le16_to_cpu(ieee80211_ctstoself_duration(ah->hw,
+ info->control.vif, pktlen, info));
+ }
+
+ ret = ah->ah_setup_tx_desc(ah, ds, pktlen,
+ ieee80211_get_hdrlen_from_skb(skb), padsize,
+ get_hw_packet_type(skb),
+ (ah->ah_txpower.txp_requested * 2),
+ hw_rate,
+ bf->rates[0].count, keyidx, ah->ah_tx_ant, flags,
+ cts_rate, duration);
+ if (ret)
+ goto err_unmap;
+
+ /* Set up MRR descriptor */
+ if (ah->ah_capabilities.cap_has_mrr_support) {
+ memset(mrr_rate, 0, sizeof(mrr_rate));
+ memset(mrr_tries, 0, sizeof(mrr_tries));
+
+ for (i = 0; i < 3; i++) {
+
+ rate = ath5k_get_rate(ah->hw, info, bf, i);
+ if (!rate)
+ break;
+
+ mrr_rate[i] = ath5k_get_rate_hw_value(ah->hw, info, bf, i);
+ mrr_tries[i] = bf->rates[i].count;
+ }
+
+ ath5k_hw_setup_mrr_tx_desc(ah, ds,
+ mrr_rate[0], mrr_tries[0],
+ mrr_rate[1], mrr_tries[1],
+ mrr_rate[2], mrr_tries[2]);
+ }
+
+ ds->ds_link = 0;
+ ds->ds_data = bf->skbaddr;
+
+ spin_lock_bh(&txq->lock);
+ list_add_tail(&bf->list, &txq->q);
+ txq->txq_len++;
+ if (txq->link == NULL) /* is this first packet? */
+ ath5k_hw_set_txdp(ah, txq->qnum, bf->daddr);
+ else /* no, so only link it */
+ *txq->link = bf->daddr;
+
+ txq->link = &ds->ds_link;
+ ath5k_hw_start_tx_dma(ah, txq->qnum);
+ mmiowb();
+ spin_unlock_bh(&txq->lock);
+
+ return 0;
+err_unmap:
+ dma_unmap_single(ah->dev, bf->skbaddr, skb->len, DMA_TO_DEVICE);
+ return ret;
+}
+
+/*******************\
+* Descriptors setup *
+\*******************/
+
+static int
+ath5k_desc_alloc(struct ath5k_hw *ah)
+{
+ struct ath5k_desc *ds;
+ struct ath5k_buf *bf;
+ dma_addr_t da;
+ unsigned int i;
+ int ret;
+
+ /* allocate descriptors */
+ ah->desc_len = sizeof(struct ath5k_desc) *
+ (ATH_TXBUF + ATH_RXBUF + ATH_BCBUF + 1);
+
+ ah->desc = dma_alloc_coherent(ah->dev, ah->desc_len,
+ &ah->desc_daddr, GFP_KERNEL);
+ if (ah->desc == NULL) {
+ ATH5K_ERR(ah, "can't allocate descriptors\n");
+ ret = -ENOMEM;
+ goto err;
+ }
+ ds = ah->desc;
+ da = ah->desc_daddr;
+ ATH5K_DBG(ah, ATH5K_DEBUG_ANY, "DMA map: %p (%zu) -> %llx\n",
+ ds, ah->desc_len, (unsigned long long)ah->desc_daddr);
+
+ bf = kcalloc(1 + ATH_TXBUF + ATH_RXBUF + ATH_BCBUF,
+ sizeof(struct ath5k_buf), GFP_KERNEL);
+ if (bf == NULL) {
+ ATH5K_ERR(ah, "can't allocate bufptr\n");
+ ret = -ENOMEM;
+ goto err_free;
+ }
+ ah->bufptr = bf;
+
+ INIT_LIST_HEAD(&ah->rxbuf);
+ for (i = 0; i < ATH_RXBUF; i++, bf++, ds++, da += sizeof(*ds)) {
+ bf->desc = ds;
+ bf->daddr = da;
+ list_add_tail(&bf->list, &ah->rxbuf);
+ }
+
+ INIT_LIST_HEAD(&ah->txbuf);
+ ah->txbuf_len = ATH_TXBUF;
+ for (i = 0; i < ATH_TXBUF; i++, bf++, ds++, da += sizeof(*ds)) {
+ bf->desc = ds;
+ bf->daddr = da;
+ list_add_tail(&bf->list, &ah->txbuf);
+ }
+
+ /* beacon buffers */
+ INIT_LIST_HEAD(&ah->bcbuf);
+ for (i = 0; i < ATH_BCBUF; i++, bf++, ds++, da += sizeof(*ds)) {
+ bf->desc = ds;
+ bf->daddr = da;
+ list_add_tail(&bf->list, &ah->bcbuf);
+ }
+
+ return 0;
+err_free:
+ dma_free_coherent(ah->dev, ah->desc_len, ah->desc, ah->desc_daddr);
+err:
+ ah->desc = NULL;
+ return ret;
+}
+
+void
+ath5k_txbuf_free_skb(struct ath5k_hw *ah, struct ath5k_buf *bf)
+{
+ BUG_ON(!bf);
+ if (!bf->skb)
+ return;
+ dma_unmap_single(ah->dev, bf->skbaddr, bf->skb->len,
+ DMA_TO_DEVICE);
+ ieee80211_free_txskb(ah->hw, bf->skb);
+ bf->skb = NULL;
+ bf->skbaddr = 0;
+ bf->desc->ds_data = 0;
+}
+
+void
+ath5k_rxbuf_free_skb(struct ath5k_hw *ah, struct ath5k_buf *bf)
+{
+ struct ath_common *common = ath5k_hw_common(ah);
+
+ BUG_ON(!bf);
+ if (!bf->skb)
+ return;
+ dma_unmap_single(ah->dev, bf->skbaddr, common->rx_bufsize,
+ DMA_FROM_DEVICE);
+ dev_kfree_skb_any(bf->skb);
+ bf->skb = NULL;
+ bf->skbaddr = 0;
+ bf->desc->ds_data = 0;
+}
+
+static void
+ath5k_desc_free(struct ath5k_hw *ah)
+{
+ struct ath5k_buf *bf;
+
+ list_for_each_entry(bf, &ah->txbuf, list)
+ ath5k_txbuf_free_skb(ah, bf);
+ list_for_each_entry(bf, &ah->rxbuf, list)
+ ath5k_rxbuf_free_skb(ah, bf);
+ list_for_each_entry(bf, &ah->bcbuf, list)
+ ath5k_txbuf_free_skb(ah, bf);
+
+ /* Free memory associated with all descriptors */
+ dma_free_coherent(ah->dev, ah->desc_len, ah->desc, ah->desc_daddr);
+ ah->desc = NULL;
+ ah->desc_daddr = 0;
+
+ kfree(ah->bufptr);
+ ah->bufptr = NULL;
+}
+
+
+/**************\
+* Queues setup *
+\**************/
+
+static struct ath5k_txq *
+ath5k_txq_setup(struct ath5k_hw *ah,
+ int qtype, int subtype)
+{
+ struct ath5k_txq *txq;
+ struct ath5k_txq_info qi = {
+ .tqi_subtype = subtype,
+ /* XXX: default values not correct for B and XR channels,
+ * but who cares? */
+ .tqi_aifs = AR5K_TUNE_AIFS,
+ .tqi_cw_min = AR5K_TUNE_CWMIN,
+ .tqi_cw_max = AR5K_TUNE_CWMAX
+ };
+ int qnum;
+
+ /*
+ * Enable interrupts only for EOL and DESC conditions.
+ * We mark tx descriptors to receive a DESC interrupt
+ * when a tx queue gets deep; otherwise we wait for the
+ * EOL to reap descriptors. Note that this is done to
+ * reduce interrupt load and this only defers reaping
+ * descriptors, never transmitting frames. Aside from
+ * reducing interrupts this also permits more concurrency.
+ * The only potential downside is if the tx queue backs
+ * up in which case the top half of the kernel may backup
+ * due to a lack of tx descriptors.
+ */
+ qi.tqi_flags = AR5K_TXQ_FLAG_TXEOLINT_ENABLE |
+ AR5K_TXQ_FLAG_TXDESCINT_ENABLE;
+ qnum = ath5k_hw_setup_tx_queue(ah, qtype, &qi);
+ if (qnum < 0) {
+ /*
+ * NB: don't print a message, this happens
+ * normally on parts with too few tx queues
+ */
+ return ERR_PTR(qnum);
+ }
+ txq = &ah->txqs[qnum];
+ if (!txq->setup) {
+ txq->qnum = qnum;
+ txq->link = NULL;
+ INIT_LIST_HEAD(&txq->q);
+ spin_lock_init(&txq->lock);
+ txq->setup = true;
+ txq->txq_len = 0;
+ txq->txq_max = ATH5K_TXQ_LEN_MAX;
+ txq->txq_poll_mark = false;
+ txq->txq_stuck = 0;
+ }
+ return &ah->txqs[qnum];
+}
+
+static int
+ath5k_beaconq_setup(struct ath5k_hw *ah)
+{
+ struct ath5k_txq_info qi = {
+ /* XXX: default values not correct for B and XR channels,
+ * but who cares? */
+ .tqi_aifs = AR5K_TUNE_AIFS,
+ .tqi_cw_min = AR5K_TUNE_CWMIN,
+ .tqi_cw_max = AR5K_TUNE_CWMAX,
+ /* NB: for dynamic turbo, don't enable any other interrupts */
+ .tqi_flags = AR5K_TXQ_FLAG_TXDESCINT_ENABLE
+ };
+
+ return ath5k_hw_setup_tx_queue(ah, AR5K_TX_QUEUE_BEACON, &qi);
+}
+
+static int
+ath5k_beaconq_config(struct ath5k_hw *ah)
+{
+ struct ath5k_txq_info qi;
+ int ret;
+
+ ret = ath5k_hw_get_tx_queueprops(ah, ah->bhalq, &qi);
+ if (ret)
+ goto err;
+
+ if (ah->opmode == NL80211_IFTYPE_AP ||
+ ah->opmode == NL80211_IFTYPE_MESH_POINT) {
+ /*
+ * Always burst out beacon and CAB traffic
+ * (aifs = cwmin = cwmax = 0)
+ */
+ qi.tqi_aifs = 0;
+ qi.tqi_cw_min = 0;
+ qi.tqi_cw_max = 0;
+ } else if (ah->opmode == NL80211_IFTYPE_ADHOC) {
+ /*
+ * Adhoc mode; backoff between 0 and (2 * cw_min).
+ */
+ qi.tqi_aifs = 0;
+ qi.tqi_cw_min = 0;
+ qi.tqi_cw_max = 2 * AR5K_TUNE_CWMIN;
+ }
+
+ ATH5K_DBG(ah, ATH5K_DEBUG_BEACON,
+ "beacon queueprops tqi_aifs:%d tqi_cw_min:%d tqi_cw_max:%d\n",
+ qi.tqi_aifs, qi.tqi_cw_min, qi.tqi_cw_max);
+
+ ret = ath5k_hw_set_tx_queueprops(ah, ah->bhalq, &qi);
+ if (ret) {
+ ATH5K_ERR(ah, "%s: unable to update parameters for beacon "
+ "hardware queue!\n", __func__);
+ goto err;
+ }
+ ret = ath5k_hw_reset_tx_queue(ah, ah->bhalq); /* push to h/w */
+ if (ret)
+ goto err;
+
+ /* reconfigure cabq with ready time to 80% of beacon_interval */
+ ret = ath5k_hw_get_tx_queueprops(ah, AR5K_TX_QUEUE_ID_CAB, &qi);
+ if (ret)
+ goto err;
+
+ qi.tqi_ready_time = (ah->bintval * 80) / 100;
+ ret = ath5k_hw_set_tx_queueprops(ah, AR5K_TX_QUEUE_ID_CAB, &qi);
+ if (ret)
+ goto err;
+
+ ret = ath5k_hw_reset_tx_queue(ah, AR5K_TX_QUEUE_ID_CAB);
+err:
+ return ret;
+}
+
+/**
+ * ath5k_drain_tx_buffs - Empty tx buffers
+ *
+ * @ah The &struct ath5k_hw
+ *
+ * Empty tx buffers from all queues in preparation
+ * of a reset or during shutdown.
+ *
+ * NB: this assumes output has been stopped and
+ * we do not need to block ath5k_tx_tasklet
+ */
+static void
+ath5k_drain_tx_buffs(struct ath5k_hw *ah)
+{
+ struct ath5k_txq *txq;
+ struct ath5k_buf *bf, *bf0;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(ah->txqs); i++) {
+ if (ah->txqs[i].setup) {
+ txq = &ah->txqs[i];
+ spin_lock_bh(&txq->lock);
+ list_for_each_entry_safe(bf, bf0, &txq->q, list) {
+ ath5k_debug_printtxbuf(ah, bf);
+
+ ath5k_txbuf_free_skb(ah, bf);
+
+ spin_lock(&ah->txbuflock);
+ list_move_tail(&bf->list, &ah->txbuf);
+ ah->txbuf_len++;
+ txq->txq_len--;
+ spin_unlock(&ah->txbuflock);
+ }
+ txq->link = NULL;
+ txq->txq_poll_mark = false;
+ spin_unlock_bh(&txq->lock);
+ }
+ }
+}
+
+static void
+ath5k_txq_release(struct ath5k_hw *ah)
+{
+ struct ath5k_txq *txq = ah->txqs;
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(ah->txqs); i++, txq++)
+ if (txq->setup) {
+ ath5k_hw_release_tx_queue(ah, txq->qnum);
+ txq->setup = false;
+ }
+}
+
+
+/*************\
+* RX Handling *
+\*************/
+
+/*
+ * Enable the receive h/w following a reset.
+ */
+static int
+ath5k_rx_start(struct ath5k_hw *ah)
+{
+ struct ath_common *common = ath5k_hw_common(ah);
+ struct ath5k_buf *bf;
+ int ret;
+
+ common->rx_bufsize = roundup(IEEE80211_MAX_FRAME_LEN, common->cachelsz);
+
+ ATH5K_DBG(ah, ATH5K_DEBUG_RESET, "cachelsz %u rx_bufsize %u\n",
+ common->cachelsz, common->rx_bufsize);
+
+ spin_lock_bh(&ah->rxbuflock);
+ ah->rxlink = NULL;
+ list_for_each_entry(bf, &ah->rxbuf, list) {
+ ret = ath5k_rxbuf_setup(ah, bf);
+ if (ret != 0) {
+ spin_unlock_bh(&ah->rxbuflock);
+ goto err;
+ }
+ }
+ bf = list_first_entry(&ah->rxbuf, struct ath5k_buf, list);
+ ath5k_hw_set_rxdp(ah, bf->daddr);
+ spin_unlock_bh(&ah->rxbuflock);
+
+ ath5k_hw_start_rx_dma(ah); /* enable recv descriptors */
+ ath5k_update_bssid_mask_and_opmode(ah, NULL); /* set filters, etc. */
+ ath5k_hw_start_rx_pcu(ah); /* re-enable PCU/DMA engine */
+
+ return 0;
+err:
+ return ret;
+}
+
+/*
+ * Disable the receive logic on PCU (DRU)
+ * In preparation for a shutdown.
+ *
+ * Note: Doesn't stop rx DMA, ath5k_hw_dma_stop
+ * does.
+ */
+static void
+ath5k_rx_stop(struct ath5k_hw *ah)
+{
+
+ ath5k_hw_set_rx_filter(ah, 0); /* clear recv filter */
+ ath5k_hw_stop_rx_pcu(ah); /* disable PCU */
+
+ ath5k_debug_printrxbuffs(ah);
+}
+
+static unsigned int
+ath5k_rx_decrypted(struct ath5k_hw *ah, struct sk_buff *skb,
+ struct ath5k_rx_status *rs)
+{
+ struct ath_common *common = ath5k_hw_common(ah);
+ struct ieee80211_hdr *hdr = (void *)skb->data;
+ unsigned int keyix, hlen;
+
+ if (!(rs->rs_status & AR5K_RXERR_DECRYPT) &&
+ rs->rs_keyix != AR5K_RXKEYIX_INVALID)
+ return RX_FLAG_DECRYPTED;
+
+ /* Apparently when a default key is used to decrypt the packet
+ the hw does not set the index used to decrypt. In such cases
+ get the index from the packet. */
+ hlen = ieee80211_hdrlen(hdr->frame_control);
+ if (ieee80211_has_protected(hdr->frame_control) &&
+ !(rs->rs_status & AR5K_RXERR_DECRYPT) &&
+ skb->len >= hlen + 4) {
+ keyix = skb->data[hlen + 3] >> 6;
+
+ if (test_bit(keyix, common->keymap))
+ return RX_FLAG_DECRYPTED;
+ }
+
+ return 0;
+}
+
+
+static void
+ath5k_check_ibss_tsf(struct ath5k_hw *ah, struct sk_buff *skb,
+ struct ieee80211_rx_status *rxs)
+{
+ u64 tsf, bc_tstamp;
+ u32 hw_tu;
+ struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)skb->data;
+
+ if (le16_to_cpu(mgmt->u.beacon.capab_info) & WLAN_CAPABILITY_IBSS) {
+ /*
+ * Received an IBSS beacon with the same BSSID. Hardware *must*
+ * have updated the local TSF. We have to work around various
+ * hardware bugs, though...
+ */
+ tsf = ath5k_hw_get_tsf64(ah);
+ bc_tstamp = le64_to_cpu(mgmt->u.beacon.timestamp);
+ hw_tu = TSF_TO_TU(tsf);
+
+ ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_BEACON,
+ "beacon %llx mactime %llx (diff %lld) tsf now %llx\n",
+ (unsigned long long)bc_tstamp,
+ (unsigned long long)rxs->mactime,
+ (unsigned long long)(rxs->mactime - bc_tstamp),
+ (unsigned long long)tsf);
+
+ /*
+ * Sometimes the HW will give us a wrong tstamp in the rx
+ * status, causing the timestamp extension to go wrong.
+ * (This seems to happen especially with beacon frames bigger
+ * than 78 byte (incl. FCS))
+ * But we know that the receive timestamp must be later than the
+ * timestamp of the beacon since HW must have synced to that.
+ *
+ * NOTE: here we assume mactime to be after the frame was
+ * received, not like mac80211 which defines it at the start.
+ */
+ if (bc_tstamp > rxs->mactime) {
+ ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_BEACON,
+ "fixing mactime from %llx to %llx\n",
+ (unsigned long long)rxs->mactime,
+ (unsigned long long)tsf);
+ rxs->mactime = tsf;
+ }
+
+ /*
+ * Local TSF might have moved higher than our beacon timers,
+ * in that case we have to update them to continue sending
+ * beacons. This also takes care of synchronizing beacon sending
+ * times with other stations.
+ */
+ if (hw_tu >= ah->nexttbtt)
+ ath5k_beacon_update_timers(ah, bc_tstamp);
+
+ /* Check if the beacon timers are still correct, because a TSF
+ * update might have created a window between them - for a
+ * longer description see the comment of this function: */
+ if (!ath5k_hw_check_beacon_timers(ah, ah->bintval)) {
+ ath5k_beacon_update_timers(ah, bc_tstamp);
+ ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_BEACON,
+ "fixed beacon timers after beacon receive\n");
+ }
+ }
+}
+
+/*
+ * Compute padding position. skb must contain an IEEE 802.11 frame
+ */
+static int ath5k_common_padpos(struct sk_buff *skb)
+{
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+ __le16 frame_control = hdr->frame_control;
+ int padpos = 24;
+
+ if (ieee80211_has_a4(frame_control))
+ padpos += ETH_ALEN;
+
+ if (ieee80211_is_data_qos(frame_control))
+ padpos += IEEE80211_QOS_CTL_LEN;
+
+ return padpos;
+}
+
+/*
+ * This function expects an 802.11 frame and returns the number of
+ * bytes added, or -1 if we don't have enough header room.
+ */
+static int ath5k_add_padding(struct sk_buff *skb)
+{
+ int padpos = ath5k_common_padpos(skb);
+ int padsize = padpos & 3;
+
+ if (padsize && skb->len > padpos) {
+
+ if (skb_headroom(skb) < padsize)
+ return -1;
+
+ skb_push(skb, padsize);
+ memmove(skb->data, skb->data + padsize, padpos);
+ return padsize;
+ }
+
+ return 0;
+}
+
+/*
+ * The MAC header is padded to have 32-bit boundary if the
+ * packet payload is non-zero. The general calculation for
+ * padsize would take into account odd header lengths:
+ * padsize = 4 - (hdrlen & 3); however, since only
+ * even-length headers are used, padding can only be 0 or 2
+ * bytes and we can optimize this a bit. We must not try to
+ * remove padding from short control frames that do not have a
+ * payload.
+ *
+ * This function expects an 802.11 frame and returns the number of
+ * bytes removed.
+ */
+static int ath5k_remove_padding(struct sk_buff *skb)
+{
+ int padpos = ath5k_common_padpos(skb);
+ int padsize = padpos & 3;
+
+ if (padsize && skb->len >= padpos + padsize) {
+ memmove(skb->data + padsize, skb->data, padpos);
+ skb_pull(skb, padsize);
+ return padsize;
+ }
+
+ return 0;
+}
+
+static void
+ath5k_receive_frame(struct ath5k_hw *ah, struct sk_buff *skb,
+ struct ath5k_rx_status *rs)
+{
+ struct ieee80211_rx_status *rxs;
+ struct ath_common *common = ath5k_hw_common(ah);
+
+ ath5k_remove_padding(skb);
+
+ rxs = IEEE80211_SKB_RXCB(skb);
+
+ rxs->flag = 0;
+ if (unlikely(rs->rs_status & AR5K_RXERR_MIC))
+ rxs->flag |= RX_FLAG_MMIC_ERROR;
+ if (unlikely(rs->rs_status & AR5K_RXERR_CRC))
+ rxs->flag |= RX_FLAG_FAILED_FCS_CRC;
+
+
+ /*
+ * always extend the mac timestamp, since this information is
+ * also needed for proper IBSS merging.
+ *
+ * XXX: it might be too late to do it here, since rs_tstamp is
+ * 15bit only. that means TSF extension has to be done within
+ * 32768usec (about 32ms). it might be necessary to move this to
+ * the interrupt handler, like it is done in madwifi.
+ */
+ rxs->mactime = ath5k_extend_tsf(ah, rs->rs_tstamp);
+ rxs->flag |= RX_FLAG_MACTIME_END;
+
+ rxs->freq = ah->curchan->center_freq;
+ rxs->band = ah->curchan->band;
+
+ rxs->signal = ah->ah_noise_floor + rs->rs_rssi;
+
+ rxs->antenna = rs->rs_antenna;
+
+ if (rs->rs_antenna > 0 && rs->rs_antenna < 5)
+ ah->stats.antenna_rx[rs->rs_antenna]++;
+ else
+ ah->stats.antenna_rx[0]++; /* invalid */
+
+ rxs->rate_idx = ath5k_hw_to_driver_rix(ah, rs->rs_rate);
+ rxs->flag |= ath5k_rx_decrypted(ah, skb, rs);
+ switch (ah->ah_bwmode) {
+ case AR5K_BWMODE_5MHZ:
+ rxs->flag |= RX_FLAG_5MHZ;
+ break;
+ case AR5K_BWMODE_10MHZ:
+ rxs->flag |= RX_FLAG_10MHZ;
+ break;
+ default:
+ break;
+ }
+
+ if (rs->rs_rate ==
+ ah->sbands[ah->curchan->band].bitrates[rxs->rate_idx].hw_value_short)
+ rxs->flag |= RX_FLAG_SHORTPRE;
+
+ trace_ath5k_rx(ah, skb);
+
+ if (ath_is_mybeacon(common, (struct ieee80211_hdr *)skb->data)) {
+ ewma_add(&ah->ah_beacon_rssi_avg, rs->rs_rssi);
+
+ /* check beacons in IBSS mode */
+ if (ah->opmode == NL80211_IFTYPE_ADHOC)
+ ath5k_check_ibss_tsf(ah, skb, rxs);
+ }
+
+ ieee80211_rx(ah->hw, skb);
+}
+
+/** ath5k_frame_receive_ok() - Do we want to receive this frame or not?
+ *
+ * Check if we want to further process this frame or not. Also update
+ * statistics. Return true if we want this frame, false if not.
+ */
+static bool
+ath5k_receive_frame_ok(struct ath5k_hw *ah, struct ath5k_rx_status *rs)
+{
+ ah->stats.rx_all_count++;
+ ah->stats.rx_bytes_count += rs->rs_datalen;
+
+ if (unlikely(rs->rs_status)) {
+ unsigned int filters;
+
+ if (rs->rs_status & AR5K_RXERR_CRC)
+ ah->stats.rxerr_crc++;
+ if (rs->rs_status & AR5K_RXERR_FIFO)
+ ah->stats.rxerr_fifo++;
+ if (rs->rs_status & AR5K_RXERR_PHY) {
+ ah->stats.rxerr_phy++;
+ if (rs->rs_phyerr > 0 && rs->rs_phyerr < 32)
+ ah->stats.rxerr_phy_code[rs->rs_phyerr]++;
+
+ /*
+ * Treat packets that underwent a CCK or OFDM reset as having a bad CRC.
+ * These restarts happen when the radio resynchronizes to a stronger frame
+ * while receiving a weaker frame. Here we receive the prefix of the weak
+ * frame. Since these are incomplete packets, mark their CRC as invalid.
+ */
+ if (rs->rs_phyerr == AR5K_RX_PHY_ERROR_OFDM_RESTART ||
+ rs->rs_phyerr == AR5K_RX_PHY_ERROR_CCK_RESTART) {
+ rs->rs_status |= AR5K_RXERR_CRC;
+ rs->rs_status &= ~AR5K_RXERR_PHY;
+ } else {
+ return false;
+ }
+ }
+ if (rs->rs_status & AR5K_RXERR_DECRYPT) {
+ /*
+ * Decrypt error. If the error occurred
+ * because there was no hardware key, then
+ * let the frame through so the upper layers
+ * can process it. This is necessary for 5210
+ * parts which have no way to setup a ``clear''
+ * key cache entry.
+ *
+ * XXX do key cache faulting
+ */
+ ah->stats.rxerr_decrypt++;
+ if (rs->rs_keyix == AR5K_RXKEYIX_INVALID &&
+ !(rs->rs_status & AR5K_RXERR_CRC))
+ return true;
+ }
+ if (rs->rs_status & AR5K_RXERR_MIC) {
+ ah->stats.rxerr_mic++;
+ return true;
+ }
+
+ /*
+ * Reject any frames with non-crypto errors, and take into account the
+ * current FIF_* filters.
+ */
+ filters = AR5K_RXERR_DECRYPT;
+ if (ah->fif_filter_flags & FIF_FCSFAIL)
+ filters |= AR5K_RXERR_CRC;
+
+ if (rs->rs_status & ~filters)
+ return false;
+ }
+
+ if (unlikely(rs->rs_more)) {
+ ah->stats.rxerr_jumbo++;
+ return false;
+ }
+ return true;
+}
+
+static void
+ath5k_set_current_imask(struct ath5k_hw *ah)
+{
+ enum ath5k_int imask;
+ unsigned long flags;
+
+ if (test_bit(ATH_STAT_RESET, ah->status))
+ return;
+
+ spin_lock_irqsave(&ah->irqlock, flags);
+ imask = ah->imask;
+ if (ah->rx_pending)
+ imask &= ~AR5K_INT_RX_ALL;
+ if (ah->tx_pending)
+ imask &= ~AR5K_INT_TX_ALL;
+ ath5k_hw_set_imr(ah, imask);
+ spin_unlock_irqrestore(&ah->irqlock, flags);
+}
+
+static void
+ath5k_tasklet_rx(unsigned long data)
+{
+ struct ath5k_rx_status rs = {};
+ struct sk_buff *skb, *next_skb;
+ dma_addr_t next_skb_addr;
+ struct ath5k_hw *ah = (void *)data;
+ struct ath_common *common = ath5k_hw_common(ah);
+ struct ath5k_buf *bf;
+ struct ath5k_desc *ds;
+ int ret;
+
+ spin_lock(&ah->rxbuflock);
+ if (list_empty(&ah->rxbuf)) {
+ ATH5K_WARN(ah, "empty rx buf pool\n");
+ goto unlock;
+ }
+ do {
+ bf = list_first_entry(&ah->rxbuf, struct ath5k_buf, list);
+ BUG_ON(bf->skb == NULL);
+ skb = bf->skb;
+ ds = bf->desc;
+
+ /* bail if HW is still using self-linked descriptor */
+ if (ath5k_hw_get_rxdp(ah) == bf->daddr)
+ break;
+
+ ret = ah->ah_proc_rx_desc(ah, ds, &rs);
+ if (unlikely(ret == -EINPROGRESS))
+ break;
+ else if (unlikely(ret)) {
+ ATH5K_ERR(ah, "error in processing rx descriptor\n");
+ ah->stats.rxerr_proc++;
+ break;
+ }
+
+ if (ath5k_receive_frame_ok(ah, &rs)) {
+ next_skb = ath5k_rx_skb_alloc(ah, &next_skb_addr);
+
+ /*
+ * If we can't replace bf->skb with a new skb under
+ * memory pressure, just skip this packet
+ */
+ if (!next_skb)
+ goto next;
+
+ dma_unmap_single(ah->dev, bf->skbaddr,
+ common->rx_bufsize,
+ DMA_FROM_DEVICE);
+
+ skb_put(skb, rs.rs_datalen);
+
+ ath5k_receive_frame(ah, skb, &rs);
+
+ bf->skb = next_skb;
+ bf->skbaddr = next_skb_addr;
+ }
+next:
+ list_move_tail(&bf->list, &ah->rxbuf);
+ } while (ath5k_rxbuf_setup(ah, bf) == 0);
+unlock:
+ spin_unlock(&ah->rxbuflock);
+ ah->rx_pending = false;
+ ath5k_set_current_imask(ah);
+}
+
+
+/*************\
+* TX Handling *
+\*************/
+
+void
+ath5k_tx_queue(struct ieee80211_hw *hw, struct sk_buff *skb,
+ struct ath5k_txq *txq, struct ieee80211_tx_control *control)
+{
+ struct ath5k_hw *ah = hw->priv;
+ struct ath5k_buf *bf;
+ unsigned long flags;
+ int padsize;
+
+ trace_ath5k_tx(ah, skb, txq);
+
+ /*
+ * The hardware expects the header padded to 4 byte boundaries.
+ * If this is not the case, we add the padding after the header.
+ */
+ padsize = ath5k_add_padding(skb);
+ if (padsize < 0) {
+ ATH5K_ERR(ah, "tx hdrlen not %%4: not enough"
+ " headroom to pad");
+ goto drop_packet;
+ }
+
+ if (txq->txq_len >= txq->txq_max &&
+ txq->qnum <= AR5K_TX_QUEUE_ID_DATA_MAX)
+ ieee80211_stop_queue(hw, txq->qnum);
+
+ spin_lock_irqsave(&ah->txbuflock, flags);
+ if (list_empty(&ah->txbuf)) {
+ ATH5K_ERR(ah, "no further txbuf available, dropping packet\n");
+ spin_unlock_irqrestore(&ah->txbuflock, flags);
+ ieee80211_stop_queues(hw);
+ goto drop_packet;
+ }
+ bf = list_first_entry(&ah->txbuf, struct ath5k_buf, list);
+ list_del(&bf->list);
+ ah->txbuf_len--;
+ if (list_empty(&ah->txbuf))
+ ieee80211_stop_queues(hw);
+ spin_unlock_irqrestore(&ah->txbuflock, flags);
+
+ bf->skb = skb;
+
+ if (ath5k_txbuf_setup(ah, bf, txq, padsize, control)) {
+ bf->skb = NULL;
+ spin_lock_irqsave(&ah->txbuflock, flags);
+ list_add_tail(&bf->list, &ah->txbuf);
+ ah->txbuf_len++;
+ spin_unlock_irqrestore(&ah->txbuflock, flags);
+ goto drop_packet;
+ }
+ return;
+
+drop_packet:
+ ieee80211_free_txskb(hw, skb);
+}
+
+static void
+ath5k_tx_frame_completed(struct ath5k_hw *ah, struct sk_buff *skb,
+ struct ath5k_txq *txq, struct ath5k_tx_status *ts,
+ struct ath5k_buf *bf)
+{
+ struct ieee80211_tx_info *info;
+ u8 tries[3];
+ int i;
+ int size = 0;
+
+ ah->stats.tx_all_count++;
+ ah->stats.tx_bytes_count += skb->len;
+ info = IEEE80211_SKB_CB(skb);
+
+ size = min_t(int, sizeof(info->status.rates), sizeof(bf->rates));
+ memcpy(info->status.rates, bf->rates, size);
+
+ tries[0] = info->status.rates[0].count;
+ tries[1] = info->status.rates[1].count;
+ tries[2] = info->status.rates[2].count;
+
+ ieee80211_tx_info_clear_status(info);
+
+ for (i = 0; i < ts->ts_final_idx; i++) {
+ struct ieee80211_tx_rate *r =
+ &info->status.rates[i];
+
+ r->count = tries[i];
+ }
+
+ info->status.rates[ts->ts_final_idx].count = ts->ts_final_retry;
+ info->status.rates[ts->ts_final_idx + 1].idx = -1;
+
+ if (unlikely(ts->ts_status)) {
+ ah->stats.ack_fail++;
+ if (ts->ts_status & AR5K_TXERR_FILT) {
+ info->flags |= IEEE80211_TX_STAT_TX_FILTERED;
+ ah->stats.txerr_filt++;
+ }
+ if (ts->ts_status & AR5K_TXERR_XRETRY)
+ ah->stats.txerr_retry++;
+ if (ts->ts_status & AR5K_TXERR_FIFO)
+ ah->stats.txerr_fifo++;
+ } else {
+ info->flags |= IEEE80211_TX_STAT_ACK;
+ info->status.ack_signal = ts->ts_rssi;
+
+ /* count the successful attempt as well */
+ info->status.rates[ts->ts_final_idx].count++;
+ }
+
+ /*
+ * Remove MAC header padding before giving the frame
+ * back to mac80211.
+ */
+ ath5k_remove_padding(skb);
+
+ if (ts->ts_antenna > 0 && ts->ts_antenna < 5)
+ ah->stats.antenna_tx[ts->ts_antenna]++;
+ else
+ ah->stats.antenna_tx[0]++; /* invalid */
+
+ trace_ath5k_tx_complete(ah, skb, txq, ts);
+ ieee80211_tx_status(ah->hw, skb);
+}
+
+static void
+ath5k_tx_processq(struct ath5k_hw *ah, struct ath5k_txq *txq)
+{
+ struct ath5k_tx_status ts = {};
+ struct ath5k_buf *bf, *bf0;
+ struct ath5k_desc *ds;
+ struct sk_buff *skb;
+ int ret;
+
+ spin_lock(&txq->lock);
+ list_for_each_entry_safe(bf, bf0, &txq->q, list) {
+
+ txq->txq_poll_mark = false;
+
+ /* skb might already have been processed last time. */
+ if (bf->skb != NULL) {
+ ds = bf->desc;
+
+ ret = ah->ah_proc_tx_desc(ah, ds, &ts);
+ if (unlikely(ret == -EINPROGRESS))
+ break;
+ else if (unlikely(ret)) {
+ ATH5K_ERR(ah,
+ "error %d while processing "
+ "queue %u\n", ret, txq->qnum);
+ break;
+ }
+
+ skb = bf->skb;
+ bf->skb = NULL;
+
+ dma_unmap_single(ah->dev, bf->skbaddr, skb->len,
+ DMA_TO_DEVICE);
+ ath5k_tx_frame_completed(ah, skb, txq, &ts, bf);
+ }
+
+ /*
+ * It's possible that the hardware can say the buffer is
+ * completed when it hasn't yet loaded the ds_link from
+ * host memory and moved on.
+ * Always keep the last descriptor to avoid HW races...
+ */
+ if (ath5k_hw_get_txdp(ah, txq->qnum) != bf->daddr) {
+ spin_lock(&ah->txbuflock);
+ list_move_tail(&bf->list, &ah->txbuf);
+ ah->txbuf_len++;
+ txq->txq_len--;
+ spin_unlock(&ah->txbuflock);
+ }
+ }
+ spin_unlock(&txq->lock);
+ if (txq->txq_len < ATH5K_TXQ_LEN_LOW && txq->qnum < 4)
+ ieee80211_wake_queue(ah->hw, txq->qnum);
+}
+
+static void
+ath5k_tasklet_tx(unsigned long data)
+{
+ int i;
+ struct ath5k_hw *ah = (void *)data;
+
+ for (i = 0; i < AR5K_NUM_TX_QUEUES; i++)
+ if (ah->txqs[i].setup && (ah->ah_txq_isr_txok_all & BIT(i)))
+ ath5k_tx_processq(ah, &ah->txqs[i]);
+
+ ah->tx_pending = false;
+ ath5k_set_current_imask(ah);
+}
+
+
+/*****************\
+* Beacon handling *
+\*****************/
+
+/*
+ * Setup the beacon frame for transmit.
+ */
+static int
+ath5k_beacon_setup(struct ath5k_hw *ah, struct ath5k_buf *bf)
+{
+ struct sk_buff *skb = bf->skb;
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ struct ath5k_desc *ds;
+ int ret = 0;
+ u8 antenna;
+ u32 flags;
+ const int padsize = 0;
+
+ bf->skbaddr = dma_map_single(ah->dev, skb->data, skb->len,
+ DMA_TO_DEVICE);
+ ATH5K_DBG(ah, ATH5K_DEBUG_BEACON, "skb %p [data %p len %u] "
+ "skbaddr %llx\n", skb, skb->data, skb->len,
+ (unsigned long long)bf->skbaddr);
+
+ if (dma_mapping_error(ah->dev, bf->skbaddr)) {
+ ATH5K_ERR(ah, "beacon DMA mapping failed\n");
+ dev_kfree_skb_any(skb);
+ bf->skb = NULL;
+ return -EIO;
+ }
+
+ ds = bf->desc;
+ antenna = ah->ah_tx_ant;
+
+ flags = AR5K_TXDESC_NOACK;
+ if (ah->opmode == NL80211_IFTYPE_ADHOC && ath5k_hw_hasveol(ah)) {
+ ds->ds_link = bf->daddr; /* self-linked */
+ flags |= AR5K_TXDESC_VEOL;
+ } else
+ ds->ds_link = 0;
+
+ /*
+ * If we use multiple antennas on AP and use
+ * the Sectored AP scenario, switch antenna every
+ * 4 beacons to make sure everybody hears our AP.
+ * When a client tries to associate, hw will keep
+ * track of the tx antenna to be used for this client
+ * automatically, based on ACKed packets.
+ *
+ * Note: AP still listens and transmits RTS on the
+ * default antenna which is supposed to be an omni.
+ *
+ * Note2: On sectored scenarios it's possible to have
+ * multiple antennas (1 omni -- the default -- and 14
+ * sectors), so if we choose to actually support this
+ * mode, we need to allow the user to set how many antennas
+ * we have and tweak the code below to send beacons
+ * on all of them.
+ */
+ if (ah->ah_ant_mode == AR5K_ANTMODE_SECTOR_AP)
+ antenna = ah->bsent & 4 ? 2 : 1;
+
+
+ /* FIXME: If we are in g mode and rate is a CCK rate
+ * subtract ah->ah_txpower.txp_cck_ofdm_pwr_delta
+ * from tx power (value is in dB units already) */
+ ds->ds_data = bf->skbaddr;
+ ret = ah->ah_setup_tx_desc(ah, ds, skb->len,
+ ieee80211_get_hdrlen_from_skb(skb), padsize,
+ AR5K_PKT_TYPE_BEACON,
+ (ah->ah_txpower.txp_requested * 2),
+ ieee80211_get_tx_rate(ah->hw, info)->hw_value,
+ 1, AR5K_TXKEYIX_INVALID,
+ antenna, flags, 0, 0);
+ if (ret)
+ goto err_unmap;
+
+ return 0;
+err_unmap:
+ dma_unmap_single(ah->dev, bf->skbaddr, skb->len, DMA_TO_DEVICE);
+ return ret;
+}
+
+/*
+ * Updates the beacon that is sent by ath5k_beacon_send. For adhoc,
+ * this is called only once at config_bss time, for AP we do it every
+ * SWBA interrupt so that the TIM will reflect buffered frames.
+ *
+ * Called with the beacon lock.
+ */
+int
+ath5k_beacon_update(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
+{
+ int ret;
+ struct ath5k_hw *ah = hw->priv;
+ struct ath5k_vif *avf;
+ struct sk_buff *skb;
+
+ if (WARN_ON(!vif)) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ skb = ieee80211_beacon_get(hw, vif);
+
+ if (!skb) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ avf = (void *)vif->drv_priv;
+ ath5k_txbuf_free_skb(ah, avf->bbuf);
+ avf->bbuf->skb = skb;
+ ret = ath5k_beacon_setup(ah, avf->bbuf);
+out:
+ return ret;
+}
+
+/*
+ * Transmit a beacon frame at SWBA. Dynamic updates to the
+ * frame contents are done as needed and the slot time is
+ * also adjusted based on current state.
+ *
+ * This is called from software irq context (beacontq tasklets)
+ * or user context from ath5k_beacon_config.
+ */
+static void
+ath5k_beacon_send(struct ath5k_hw *ah)
+{
+ struct ieee80211_vif *vif;
+ struct ath5k_vif *avf;
+ struct ath5k_buf *bf;
+ struct sk_buff *skb;
+ int err;
+
+ ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_BEACON, "in beacon_send\n");
+
+ /*
+ * Check if the previous beacon has gone out. If
+ * not, don't don't try to post another: skip this
+ * period and wait for the next. Missed beacons
+ * indicate a problem and should not occur. If we
+ * miss too many consecutive beacons reset the device.
+ */
+ if (unlikely(ath5k_hw_num_tx_pending(ah, ah->bhalq) != 0)) {
+ ah->bmisscount++;
+ ATH5K_DBG(ah, ATH5K_DEBUG_BEACON,
+ "missed %u consecutive beacons\n", ah->bmisscount);
+ if (ah->bmisscount > 10) { /* NB: 10 is a guess */
+ ATH5K_DBG(ah, ATH5K_DEBUG_BEACON,
+ "stuck beacon time (%u missed)\n",
+ ah->bmisscount);
+ ATH5K_DBG(ah, ATH5K_DEBUG_RESET,
+ "stuck beacon, resetting\n");
+ ieee80211_queue_work(ah->hw, &ah->reset_work);
+ }
+ return;
+ }
+ if (unlikely(ah->bmisscount != 0)) {
+ ATH5K_DBG(ah, ATH5K_DEBUG_BEACON,
+ "resume beacon xmit after %u misses\n",
+ ah->bmisscount);
+ ah->bmisscount = 0;
+ }
+
+ if ((ah->opmode == NL80211_IFTYPE_AP && ah->num_ap_vifs +
+ ah->num_mesh_vifs > 1) ||
+ ah->opmode == NL80211_IFTYPE_MESH_POINT) {
+ u64 tsf = ath5k_hw_get_tsf64(ah);
+ u32 tsftu = TSF_TO_TU(tsf);
+ int slot = ((tsftu % ah->bintval) * ATH_BCBUF) / ah->bintval;
+ vif = ah->bslot[(slot + 1) % ATH_BCBUF];
+ ATH5K_DBG(ah, ATH5K_DEBUG_BEACON,
+ "tsf %llx tsftu %x intval %u slot %u vif %p\n",
+ (unsigned long long)tsf, tsftu, ah->bintval, slot, vif);
+ } else /* only one interface */
+ vif = ah->bslot[0];
+
+ if (!vif)
+ return;
+
+ avf = (void *)vif->drv_priv;
+ bf = avf->bbuf;
+
+ /*
+ * Stop any current dma and put the new frame on the queue.
+ * This should never fail since we check above that no frames
+ * are still pending on the queue.
+ */
+ if (unlikely(ath5k_hw_stop_beacon_queue(ah, ah->bhalq))) {
+ ATH5K_WARN(ah, "beacon queue %u didn't start/stop ?\n", ah->bhalq);
+ /* NB: hw still stops DMA, so proceed */
+ }
+
+ /* refresh the beacon for AP or MESH mode */
+ if (ah->opmode == NL80211_IFTYPE_AP ||
+ ah->opmode == NL80211_IFTYPE_MESH_POINT) {
+ err = ath5k_beacon_update(ah->hw, vif);
+ if (err)
+ return;
+ }
+
+ if (unlikely(bf->skb == NULL || ah->opmode == NL80211_IFTYPE_STATION ||
+ ah->opmode == NL80211_IFTYPE_MONITOR)) {
+ ATH5K_WARN(ah, "bf=%p bf_skb=%p\n", bf, bf->skb);
+ return;
+ }
+
+ trace_ath5k_tx(ah, bf->skb, &ah->txqs[ah->bhalq]);
+
+ ath5k_hw_set_txdp(ah, ah->bhalq, bf->daddr);
+ ath5k_hw_start_tx_dma(ah, ah->bhalq);
+ ATH5K_DBG(ah, ATH5K_DEBUG_BEACON, "TXDP[%u] = %llx (%p)\n",
+ ah->bhalq, (unsigned long long)bf->daddr, bf->desc);
+
+ skb = ieee80211_get_buffered_bc(ah->hw, vif);
+ while (skb) {
+ ath5k_tx_queue(ah->hw, skb, ah->cabq, NULL);
+
+ if (ah->cabq->txq_len >= ah->cabq->txq_max)
+ break;
+
+ skb = ieee80211_get_buffered_bc(ah->hw, vif);
+ }
+
+ ah->bsent++;
+}
+
+/**
+ * ath5k_beacon_update_timers - update beacon timers
+ *
+ * @ah: struct ath5k_hw pointer we are operating on
+ * @bc_tsf: the timestamp of the beacon. 0 to reset the TSF. -1 to perform a
+ * beacon timer update based on the current HW TSF.
+ *
+ * Calculate the next target beacon transmit time (TBTT) based on the timestamp
+ * of a received beacon or the current local hardware TSF and write it to the
+ * beacon timer registers.
+ *
+ * This is called in a variety of situations, e.g. when a beacon is received,
+ * when a TSF update has been detected, but also when an new IBSS is created or
+ * when we otherwise know we have to update the timers, but we keep it in this
+ * function to have it all together in one place.
+ */
+void
+ath5k_beacon_update_timers(struct ath5k_hw *ah, u64 bc_tsf)
+{
+ u32 nexttbtt, intval, hw_tu, bc_tu;
+ u64 hw_tsf;
+
+ intval = ah->bintval & AR5K_BEACON_PERIOD;
+ if (ah->opmode == NL80211_IFTYPE_AP && ah->num_ap_vifs
+ + ah->num_mesh_vifs > 1) {
+ intval /= ATH_BCBUF; /* staggered multi-bss beacons */
+ if (intval < 15)
+ ATH5K_WARN(ah, "intval %u is too low, min 15\n",
+ intval);
+ }
+ if (WARN_ON(!intval))
+ return;
+
+ /* beacon TSF converted to TU */
+ bc_tu = TSF_TO_TU(bc_tsf);
+
+ /* current TSF converted to TU */
+ hw_tsf = ath5k_hw_get_tsf64(ah);
+ hw_tu = TSF_TO_TU(hw_tsf);
+
+#define FUDGE (AR5K_TUNE_SW_BEACON_RESP + 3)
+ /* We use FUDGE to make sure the next TBTT is ahead of the current TU.
+ * Since we later subtract AR5K_TUNE_SW_BEACON_RESP (10) in the timer
+ * configuration we need to make sure it is bigger than that. */
+
+ if (bc_tsf == -1) {
+ /*
+ * no beacons received, called internally.
+ * just need to refresh timers based on HW TSF.
+ */
+ nexttbtt = roundup(hw_tu + FUDGE, intval);
+ } else if (bc_tsf == 0) {
+ /*
+ * no beacon received, probably called by ath5k_reset_tsf().
+ * reset TSF to start with 0.
+ */
+ nexttbtt = intval;
+ intval |= AR5K_BEACON_RESET_TSF;
+ } else if (bc_tsf > hw_tsf) {
+ /*
+ * beacon received, SW merge happened but HW TSF not yet updated.
+ * not possible to reconfigure timers yet, but next time we
+ * receive a beacon with the same BSSID, the hardware will
+ * automatically update the TSF and then we need to reconfigure
+ * the timers.
+ */
+ ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_BEACON,
+ "need to wait for HW TSF sync\n");
+ return;
+ } else {
+ /*
+ * most important case for beacon synchronization between STA.
+ *
+ * beacon received and HW TSF has been already updated by HW.
+ * update next TBTT based on the TSF of the beacon, but make
+ * sure it is ahead of our local TSF timer.
+ */
+ nexttbtt = bc_tu + roundup(hw_tu + FUDGE - bc_tu, intval);
+ }
+#undef FUDGE
+
+ ah->nexttbtt = nexttbtt;
+
+ intval |= AR5K_BEACON_ENA;
+ ath5k_hw_init_beacon_timers(ah, nexttbtt, intval);
+
+ /*
+ * debugging output last in order to preserve the time critical aspect
+ * of this function
+ */
+ if (bc_tsf == -1)
+ ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_BEACON,
+ "reconfigured timers based on HW TSF\n");
+ else if (bc_tsf == 0)
+ ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_BEACON,
+ "reset HW TSF and timers\n");
+ else
+ ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_BEACON,
+ "updated timers based on beacon TSF\n");
+
+ ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_BEACON,
+ "bc_tsf %llx hw_tsf %llx bc_tu %u hw_tu %u nexttbtt %u\n",
+ (unsigned long long) bc_tsf,
+ (unsigned long long) hw_tsf, bc_tu, hw_tu, nexttbtt);
+ ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_BEACON, "intval %u %s %s\n",
+ intval & AR5K_BEACON_PERIOD,
+ intval & AR5K_BEACON_ENA ? "AR5K_BEACON_ENA" : "",
+ intval & AR5K_BEACON_RESET_TSF ? "AR5K_BEACON_RESET_TSF" : "");
+}
+
+/**
+ * ath5k_beacon_config - Configure the beacon queues and interrupts
+ *
+ * @ah: struct ath5k_hw pointer we are operating on
+ *
+ * In IBSS mode we use a self-linked tx descriptor if possible. We enable SWBA
+ * interrupts to detect TSF updates only.
+ */
+void
+ath5k_beacon_config(struct ath5k_hw *ah)
+{
+ spin_lock_bh(&ah->block);
+ ah->bmisscount = 0;
+ ah->imask &= ~(AR5K_INT_BMISS | AR5K_INT_SWBA);
+
+ if (ah->enable_beacon) {
+ /*
+ * In IBSS mode we use a self-linked tx descriptor and let the
+ * hardware send the beacons automatically. We have to load it
+ * only once here.
+ * We use the SWBA interrupt only to keep track of the beacon
+ * timers in order to detect automatic TSF updates.
+ */
+ ath5k_beaconq_config(ah);
+
+ ah->imask |= AR5K_INT_SWBA;
+
+ if (ah->opmode == NL80211_IFTYPE_ADHOC) {
+ if (ath5k_hw_hasveol(ah))
+ ath5k_beacon_send(ah);
+ } else
+ ath5k_beacon_update_timers(ah, -1);
+ } else {
+ ath5k_hw_stop_beacon_queue(ah, ah->bhalq);
+ }
+
+ ath5k_hw_set_imr(ah, ah->imask);
+ mmiowb();
+ spin_unlock_bh(&ah->block);
+}
+
+static void ath5k_tasklet_beacon(unsigned long data)
+{
+ struct ath5k_hw *ah = (struct ath5k_hw *) data;
+
+ /*
+ * Software beacon alert--time to send a beacon.
+ *
+ * In IBSS mode we use this interrupt just to
+ * keep track of the next TBTT (target beacon
+ * transmission time) in order to detect whether
+ * automatic TSF updates happened.
+ */
+ if (ah->opmode == NL80211_IFTYPE_ADHOC) {
+ /* XXX: only if VEOL supported */
+ u64 tsf = ath5k_hw_get_tsf64(ah);
+ ah->nexttbtt += ah->bintval;
+ ATH5K_DBG(ah, ATH5K_DEBUG_BEACON,
+ "SWBA nexttbtt: %x hw_tu: %x "
+ "TSF: %llx\n",
+ ah->nexttbtt,
+ TSF_TO_TU(tsf),
+ (unsigned long long) tsf);
+ } else {
+ spin_lock(&ah->block);
+ ath5k_beacon_send(ah);
+ spin_unlock(&ah->block);
+ }
+}
+
+
+/********************\
+* Interrupt handling *
+\********************/
+
+static void
+ath5k_intr_calibration_poll(struct ath5k_hw *ah)
+{
+ if (time_is_before_eq_jiffies(ah->ah_cal_next_ani) &&
+ !(ah->ah_cal_mask & AR5K_CALIBRATION_FULL) &&
+ !(ah->ah_cal_mask & AR5K_CALIBRATION_SHORT)) {
+
+ /* Run ANI only when calibration is not active */
+
+ ah->ah_cal_next_ani = jiffies +
+ msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_ANI);
+ tasklet_schedule(&ah->ani_tasklet);
+
+ } else if (time_is_before_eq_jiffies(ah->ah_cal_next_short) &&
+ !(ah->ah_cal_mask & AR5K_CALIBRATION_FULL) &&
+ !(ah->ah_cal_mask & AR5K_CALIBRATION_SHORT)) {
+
+ /* Run calibration only when another calibration
+ * is not running.
+ *
+ * Note: This is for both full/short calibration,
+ * if it's time for a full one, ath5k_calibrate_work will deal
+ * with it. */
+
+ ah->ah_cal_next_short = jiffies +
+ msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_SHORT);
+ ieee80211_queue_work(ah->hw, &ah->calib_work);
+ }
+ /* we could use SWI to generate enough interrupts to meet our
+ * calibration interval requirements, if necessary:
+ * AR5K_REG_ENABLE_BITS(ah, AR5K_CR, AR5K_CR_SWI); */
+}
+
+static void
+ath5k_schedule_rx(struct ath5k_hw *ah)
+{
+ ah->rx_pending = true;
+ tasklet_schedule(&ah->rxtq);
+}
+
+static void
+ath5k_schedule_tx(struct ath5k_hw *ah)
+{
+ ah->tx_pending = true;
+ tasklet_schedule(&ah->txtq);
+}
+
+static irqreturn_t
+ath5k_intr(int irq, void *dev_id)
+{
+ struct ath5k_hw *ah = dev_id;
+ enum ath5k_int status;
+ unsigned int counter = 1000;
+
+
+ /*
+ * If hw is not ready (or detached) and we get an
+ * interrupt, or if we have no interrupts pending
+ * (that means it's not for us) skip it.
+ *
+ * NOTE: Group 0/1 PCI interface registers are not
+ * supported on WiSOCs, so we can't check for pending
+ * interrupts (ISR belongs to another register group
+ * so we are ok).
+ */
+ if (unlikely(test_bit(ATH_STAT_INVALID, ah->status) ||
+ ((ath5k_get_bus_type(ah) != ATH_AHB) &&
+ !ath5k_hw_is_intr_pending(ah))))
+ return IRQ_NONE;
+
+ /** Main loop **/
+ do {
+ ath5k_hw_get_isr(ah, &status); /* NB: clears IRQ too */
+
+ ATH5K_DBG(ah, ATH5K_DEBUG_INTR, "status 0x%x/0x%x\n",
+ status, ah->imask);
+
+ /*
+ * Fatal hw error -> Log and reset
+ *
+ * Fatal errors are unrecoverable so we have to
+ * reset the card. These errors include bus and
+ * dma errors.
+ */
+ if (unlikely(status & AR5K_INT_FATAL)) {
+
+ ATH5K_DBG(ah, ATH5K_DEBUG_RESET,
+ "fatal int, resetting\n");
+ ieee80211_queue_work(ah->hw, &ah->reset_work);
+
+ /*
+ * RX Overrun -> Count and reset if needed
+ *
+ * Receive buffers are full. Either the bus is busy or
+ * the CPU is not fast enough to process all received
+ * frames.
+ */
+ } else if (unlikely(status & AR5K_INT_RXORN)) {
+
+ /*
+ * Older chipsets need a reset to come out of this
+ * condition, but we treat it as RX for newer chips.
+ * We don't know exactly which versions need a reset
+ * this guess is copied from the HAL.
+ */
+ ah->stats.rxorn_intr++;
+
+ if (ah->ah_mac_srev < AR5K_SREV_AR5212) {
+ ATH5K_DBG(ah, ATH5K_DEBUG_RESET,
+ "rx overrun, resetting\n");
+ ieee80211_queue_work(ah->hw, &ah->reset_work);
+ } else
+ ath5k_schedule_rx(ah);
+
+ } else {
+
+ /* Software Beacon Alert -> Schedule beacon tasklet */
+ if (status & AR5K_INT_SWBA)
+ tasklet_hi_schedule(&ah->beacontq);
+
+ /*
+ * No more RX descriptors -> Just count
+ *
+ * NB: the hardware should re-read the link when
+ * RXE bit is written, but it doesn't work at
+ * least on older hardware revs.
+ */
+ if (status & AR5K_INT_RXEOL)
+ ah->stats.rxeol_intr++;
+
+
+ /* TX Underrun -> Bump tx trigger level */
+ if (status & AR5K_INT_TXURN)
+ ath5k_hw_update_tx_triglevel(ah, true);
+
+ /* RX -> Schedule rx tasklet */
+ if (status & (AR5K_INT_RXOK | AR5K_INT_RXERR))
+ ath5k_schedule_rx(ah);
+
+ /* TX -> Schedule tx tasklet */
+ if (status & (AR5K_INT_TXOK
+ | AR5K_INT_TXDESC
+ | AR5K_INT_TXERR
+ | AR5K_INT_TXEOL))
+ ath5k_schedule_tx(ah);
+
+ /* Missed beacon -> TODO
+ if (status & AR5K_INT_BMISS)
+ */
+
+ /* MIB event -> Update counters and notify ANI */
+ if (status & AR5K_INT_MIB) {
+ ah->stats.mib_intr++;
+ ath5k_hw_update_mib_counters(ah);
+ ath5k_ani_mib_intr(ah);
+ }
+
+ /* GPIO -> Notify RFKill layer */
+ if (status & AR5K_INT_GPIO)
+ tasklet_schedule(&ah->rf_kill.toggleq);
+
+ }
+
+ if (ath5k_get_bus_type(ah) == ATH_AHB)
+ break;
+
+ } while (ath5k_hw_is_intr_pending(ah) && --counter > 0);
+
+ /*
+ * Until we handle rx/tx interrupts mask them on IMR
+ *
+ * NOTE: ah->(rx/tx)_pending are set when scheduling the tasklets
+ * and unset after we 've handled the interrupts.
+ */
+ if (ah->rx_pending || ah->tx_pending)
+ ath5k_set_current_imask(ah);
+
+ if (unlikely(!counter))
+ ATH5K_WARN(ah, "too many interrupts, giving up for now\n");
+
+ /* Fire up calibration poll */
+ ath5k_intr_calibration_poll(ah);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * Periodically recalibrate the PHY to account
+ * for temperature/environment changes.
+ */
+static void
+ath5k_calibrate_work(struct work_struct *work)
+{
+ struct ath5k_hw *ah = container_of(work, struct ath5k_hw,
+ calib_work);
+
+ /* Should we run a full calibration ? */
+ if (time_is_before_eq_jiffies(ah->ah_cal_next_full)) {
+
+ ah->ah_cal_next_full = jiffies +
+ msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_FULL);
+ ah->ah_cal_mask |= AR5K_CALIBRATION_FULL;
+
+ ATH5K_DBG(ah, ATH5K_DEBUG_CALIBRATE,
+ "running full calibration\n");
+
+ if (ath5k_hw_gainf_calibrate(ah) == AR5K_RFGAIN_NEED_CHANGE) {
+ /*
+ * Rfgain is out of bounds, reset the chip
+ * to load new gain values.
+ */
+ ATH5K_DBG(ah, ATH5K_DEBUG_RESET,
+ "got new rfgain, resetting\n");
+ ieee80211_queue_work(ah->hw, &ah->reset_work);
+ }
+ } else
+ ah->ah_cal_mask |= AR5K_CALIBRATION_SHORT;
+
+
+ ATH5K_DBG(ah, ATH5K_DEBUG_CALIBRATE, "channel %u/%x\n",
+ ieee80211_frequency_to_channel(ah->curchan->center_freq),
+ ah->curchan->hw_value);
+
+ if (ath5k_hw_phy_calibrate(ah, ah->curchan))
+ ATH5K_ERR(ah, "calibration of channel %u failed\n",
+ ieee80211_frequency_to_channel(
+ ah->curchan->center_freq));
+
+ /* Clear calibration flags */
+ if (ah->ah_cal_mask & AR5K_CALIBRATION_FULL)
+ ah->ah_cal_mask &= ~AR5K_CALIBRATION_FULL;
+ else if (ah->ah_cal_mask & AR5K_CALIBRATION_SHORT)
+ ah->ah_cal_mask &= ~AR5K_CALIBRATION_SHORT;
+}
+
+
+static void
+ath5k_tasklet_ani(unsigned long data)
+{
+ struct ath5k_hw *ah = (void *)data;
+
+ ah->ah_cal_mask |= AR5K_CALIBRATION_ANI;
+ ath5k_ani_calibration(ah);
+ ah->ah_cal_mask &= ~AR5K_CALIBRATION_ANI;
+}
+
+
+static void
+ath5k_tx_complete_poll_work(struct work_struct *work)
+{
+ struct ath5k_hw *ah = container_of(work, struct ath5k_hw,
+ tx_complete_work.work);
+ struct ath5k_txq *txq;
+ int i;
+ bool needreset = false;
+
+ if (!test_bit(ATH_STAT_STARTED, ah->status))
+ return;
+
+ mutex_lock(&ah->lock);
+
+ for (i = 0; i < ARRAY_SIZE(ah->txqs); i++) {
+ if (ah->txqs[i].setup) {
+ txq = &ah->txqs[i];
+ spin_lock_bh(&txq->lock);
+ if (txq->txq_len > 1) {
+ if (txq->txq_poll_mark) {
+ ATH5K_DBG(ah, ATH5K_DEBUG_XMIT,
+ "TX queue stuck %d\n",
+ txq->qnum);
+ needreset = true;
+ txq->txq_stuck++;
+ spin_unlock_bh(&txq->lock);
+ break;
+ } else {
+ txq->txq_poll_mark = true;
+ }
+ }
+ spin_unlock_bh(&txq->lock);
+ }
+ }
+
+ if (needreset) {
+ ATH5K_DBG(ah, ATH5K_DEBUG_RESET,
+ "TX queues stuck, resetting\n");
+ ath5k_reset(ah, NULL, true);
+ }
+
+ mutex_unlock(&ah->lock);
+
+ ieee80211_queue_delayed_work(ah->hw, &ah->tx_complete_work,
+ msecs_to_jiffies(ATH5K_TX_COMPLETE_POLL_INT));
+}
+
+
+/*************************\
+* Initialization routines *
+\*************************/
+
+static const struct ieee80211_iface_limit if_limits[] = {
+ { .max = 2048, .types = BIT(NL80211_IFTYPE_STATION) },
+ { .max = 4, .types =
+#ifdef CONFIG_MAC80211_MESH
+ BIT(NL80211_IFTYPE_MESH_POINT) |
+#endif
+ BIT(NL80211_IFTYPE_AP) },
+};
+
+static const struct ieee80211_iface_combination if_comb = {
+ .limits = if_limits,
+ .n_limits = ARRAY_SIZE(if_limits),
+ .max_interfaces = 2048,
+ .num_different_channels = 1,
+};
+
+int
+ath5k_init_ah(struct ath5k_hw *ah, const struct ath_bus_ops *bus_ops)
+{
+ struct ieee80211_hw *hw = ah->hw;
+ struct ath_common *common;
+ int ret;
+ int csz;
+
+ /* Initialize driver private data */
+ SET_IEEE80211_DEV(hw, ah->dev);
+ hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
+ IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
+ IEEE80211_HW_SIGNAL_DBM |
+ IEEE80211_HW_MFP_CAPABLE |
+ IEEE80211_HW_REPORTS_TX_ACK_STATUS |
+ IEEE80211_HW_SUPPORTS_RC_TABLE;
+
+ hw->wiphy->interface_modes =
+ BIT(NL80211_IFTYPE_AP) |
+ BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_ADHOC) |
+ BIT(NL80211_IFTYPE_MESH_POINT);
+
+ hw->wiphy->iface_combinations = &if_comb;
+ hw->wiphy->n_iface_combinations = 1;
+
+ /* SW support for IBSS_RSN is provided by mac80211 */
+ hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
+
+ hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_5_10_MHZ;
+
+ /* both antennas can be configured as RX or TX */
+ hw->wiphy->available_antennas_tx = 0x3;
+ hw->wiphy->available_antennas_rx = 0x3;
+
+ hw->extra_tx_headroom = 2;
+
+ /*
+ * Mark the device as detached to avoid processing
+ * interrupts until setup is complete.
+ */
+ __set_bit(ATH_STAT_INVALID, ah->status);
+
+ ah->opmode = NL80211_IFTYPE_STATION;
+ ah->bintval = 1000;
+ mutex_init(&ah->lock);
+ spin_lock_init(&ah->rxbuflock);
+ spin_lock_init(&ah->txbuflock);
+ spin_lock_init(&ah->block);
+ spin_lock_init(&ah->irqlock);
+
+ /* Setup interrupt handler */
+ ret = request_irq(ah->irq, ath5k_intr, IRQF_SHARED, "ath", ah);
+ if (ret) {
+ ATH5K_ERR(ah, "request_irq failed\n");
+ goto err;
+ }
+
+ common = ath5k_hw_common(ah);
+ common->ops = &ath5k_common_ops;
+ common->bus_ops = bus_ops;
+ common->ah = ah;
+ common->hw = hw;
+ common->priv = ah;
+ common->clockrate = 40;
+
+ /*
+ * Cache line size is used to size and align various
+ * structures used to communicate with the hardware.
+ */
+ ath5k_read_cachesize(common, &csz);
+ common->cachelsz = csz << 2; /* convert to bytes */
+
+ spin_lock_init(&common->cc_lock);
+
+ /* Initialize device */
+ ret = ath5k_hw_init(ah);
+ if (ret)
+ goto err_irq;
+
+ /* Set up multi-rate retry capabilities */
+ if (ah->ah_capabilities.cap_has_mrr_support) {
+ hw->max_rates = 4;
+ hw->max_rate_tries = max(AR5K_INIT_RETRY_SHORT,
+ AR5K_INIT_RETRY_LONG);
+ }
+
+ hw->vif_data_size = sizeof(struct ath5k_vif);
+
+ /* Finish private driver data initialization */
+ ret = ath5k_init(hw);
+ if (ret)
+ goto err_ah;
+
+ ATH5K_INFO(ah, "Atheros AR%s chip found (MAC: 0x%x, PHY: 0x%x)\n",
+ ath5k_chip_name(AR5K_VERSION_MAC, ah->ah_mac_srev),
+ ah->ah_mac_srev,
+ ah->ah_phy_revision);
+
+ if (!ah->ah_single_chip) {
+ /* Single chip radio (!RF5111) */
+ if (ah->ah_radio_5ghz_revision &&
+ !ah->ah_radio_2ghz_revision) {
+ /* No 5GHz support -> report 2GHz radio */
+ if (!test_bit(AR5K_MODE_11A,
+ ah->ah_capabilities.cap_mode)) {
+ ATH5K_INFO(ah, "RF%s 2GHz radio found (0x%x)\n",
+ ath5k_chip_name(AR5K_VERSION_RAD,
+ ah->ah_radio_5ghz_revision),
+ ah->ah_radio_5ghz_revision);
+ /* No 2GHz support (5110 and some
+ * 5GHz only cards) -> report 5GHz radio */
+ } else if (!test_bit(AR5K_MODE_11B,
+ ah->ah_capabilities.cap_mode)) {
+ ATH5K_INFO(ah, "RF%s 5GHz radio found (0x%x)\n",
+ ath5k_chip_name(AR5K_VERSION_RAD,
+ ah->ah_radio_5ghz_revision),
+ ah->ah_radio_5ghz_revision);
+ /* Multiband radio */
+ } else {
+ ATH5K_INFO(ah, "RF%s multiband radio found"
+ " (0x%x)\n",
+ ath5k_chip_name(AR5K_VERSION_RAD,
+ ah->ah_radio_5ghz_revision),
+ ah->ah_radio_5ghz_revision);
+ }
+ }
+ /* Multi chip radio (RF5111 - RF2111) ->
+ * report both 2GHz/5GHz radios */
+ else if (ah->ah_radio_5ghz_revision &&
+ ah->ah_radio_2ghz_revision) {
+ ATH5K_INFO(ah, "RF%s 5GHz radio found (0x%x)\n",
+ ath5k_chip_name(AR5K_VERSION_RAD,
+ ah->ah_radio_5ghz_revision),
+ ah->ah_radio_5ghz_revision);
+ ATH5K_INFO(ah, "RF%s 2GHz radio found (0x%x)\n",
+ ath5k_chip_name(AR5K_VERSION_RAD,
+ ah->ah_radio_2ghz_revision),
+ ah->ah_radio_2ghz_revision);
+ }
+ }
+
+ ath5k_debug_init_device(ah);
+
+ /* ready to process interrupts */
+ __clear_bit(ATH_STAT_INVALID, ah->status);
+
+ return 0;
+err_ah:
+ ath5k_hw_deinit(ah);
+err_irq:
+ free_irq(ah->irq, ah);
+err:
+ return ret;
+}
+
+static int
+ath5k_stop_locked(struct ath5k_hw *ah)
+{
+
+ ATH5K_DBG(ah, ATH5K_DEBUG_RESET, "invalid %u\n",
+ test_bit(ATH_STAT_INVALID, ah->status));
+
+ /*
+ * Shutdown the hardware and driver:
+ * stop output from above
+ * disable interrupts
+ * turn off timers
+ * turn off the radio
+ * clear transmit machinery
+ * clear receive machinery
+ * drain and release tx queues
+ * reclaim beacon resources
+ * power down hardware
+ *
+ * Note that some of this work is not possible if the
+ * hardware is gone (invalid).
+ */
+ ieee80211_stop_queues(ah->hw);
+
+ if (!test_bit(ATH_STAT_INVALID, ah->status)) {
+ ath5k_led_off(ah);
+ ath5k_hw_set_imr(ah, 0);
+ synchronize_irq(ah->irq);
+ ath5k_rx_stop(ah);
+ ath5k_hw_dma_stop(ah);
+ ath5k_drain_tx_buffs(ah);
+ ath5k_hw_phy_disable(ah);
+ }
+
+ return 0;
+}
+
+int ath5k_start(struct ieee80211_hw *hw)
+{
+ struct ath5k_hw *ah = hw->priv;
+ struct ath_common *common = ath5k_hw_common(ah);
+ int ret, i;
+
+ mutex_lock(&ah->lock);
+
+ ATH5K_DBG(ah, ATH5K_DEBUG_RESET, "mode %d\n", ah->opmode);
+
+ /*
+ * Stop anything previously setup. This is safe
+ * no matter this is the first time through or not.
+ */
+ ath5k_stop_locked(ah);
+
+ /*
+ * The basic interface to setting the hardware in a good
+ * state is ``reset''. On return the hardware is known to
+ * be powered up and with interrupts disabled. This must
+ * be followed by initialization of the appropriate bits
+ * and then setup of the interrupt mask.
+ */
+ ah->curchan = ah->hw->conf.chandef.chan;
+ ah->imask = AR5K_INT_RXOK
+ | AR5K_INT_RXERR
+ | AR5K_INT_RXEOL
+ | AR5K_INT_RXORN
+ | AR5K_INT_TXDESC
+ | AR5K_INT_TXEOL
+ | AR5K_INT_FATAL
+ | AR5K_INT_GLOBAL
+ | AR5K_INT_MIB;
+
+ ret = ath5k_reset(ah, NULL, false);
+ if (ret)
+ goto done;
+
+ if (!ath5k_modparam_no_hw_rfkill_switch)
+ ath5k_rfkill_hw_start(ah);
+
+ /*
+ * Reset the key cache since some parts do not reset the
+ * contents on initial power up or resume from suspend.
+ */
+ for (i = 0; i < common->keymax; i++)
+ ath_hw_keyreset(common, (u16) i);
+
+ /* Use higher rates for acks instead of base
+ * rate */
+ ah->ah_ack_bitrate_high = true;
+
+ for (i = 0; i < ARRAY_SIZE(ah->bslot); i++)
+ ah->bslot[i] = NULL;
+
+ ret = 0;
+done:
+ mmiowb();
+ mutex_unlock(&ah->lock);
+
+ set_bit(ATH_STAT_STARTED, ah->status);
+ ieee80211_queue_delayed_work(ah->hw, &ah->tx_complete_work,
+ msecs_to_jiffies(ATH5K_TX_COMPLETE_POLL_INT));
+
+ return ret;
+}
+
+static void ath5k_stop_tasklets(struct ath5k_hw *ah)
+{
+ ah->rx_pending = false;
+ ah->tx_pending = false;
+ tasklet_kill(&ah->rxtq);
+ tasklet_kill(&ah->txtq);
+ tasklet_kill(&ah->beacontq);
+ tasklet_kill(&ah->ani_tasklet);
+}
+
+/*
+ * Stop the device, grabbing the top-level lock to protect
+ * against concurrent entry through ath5k_init (which can happen
+ * if another thread does a system call and the thread doing the
+ * stop is preempted).
+ */
+void ath5k_stop(struct ieee80211_hw *hw)
+{
+ struct ath5k_hw *ah = hw->priv;
+ int ret;
+
+ mutex_lock(&ah->lock);
+ ret = ath5k_stop_locked(ah);
+ if (ret == 0 && !test_bit(ATH_STAT_INVALID, ah->status)) {
+ /*
+ * Don't set the card in full sleep mode!
+ *
+ * a) When the device is in this state it must be carefully
+ * woken up or references to registers in the PCI clock
+ * domain may freeze the bus (and system). This varies
+ * by chip and is mostly an issue with newer parts
+ * (madwifi sources mentioned srev >= 0x78) that go to
+ * sleep more quickly.
+ *
+ * b) On older chips full sleep results a weird behaviour
+ * during wakeup. I tested various cards with srev < 0x78
+ * and they don't wake up after module reload, a second
+ * module reload is needed to bring the card up again.
+ *
+ * Until we figure out what's going on don't enable
+ * full chip reset on any chip (this is what Legacy HAL
+ * and Sam's HAL do anyway). Instead Perform a full reset
+ * on the device (same as initial state after attach) and
+ * leave it idle (keep MAC/BB on warm reset) */
+ ret = ath5k_hw_on_hold(ah);
+
+ ATH5K_DBG(ah, ATH5K_DEBUG_RESET,
+ "putting device to sleep\n");
+ }
+
+ mmiowb();
+ mutex_unlock(&ah->lock);
+
+ ath5k_stop_tasklets(ah);
+
+ clear_bit(ATH_STAT_STARTED, ah->status);
+ cancel_delayed_work_sync(&ah->tx_complete_work);
+
+ if (!ath5k_modparam_no_hw_rfkill_switch)
+ ath5k_rfkill_hw_stop(ah);
+}
+
+/*
+ * Reset the hardware. If chan is not NULL, then also pause rx/tx
+ * and change to the given channel.
+ *
+ * This should be called with ah->lock.
+ */
+static int
+ath5k_reset(struct ath5k_hw *ah, struct ieee80211_channel *chan,
+ bool skip_pcu)
+{
+ struct ath_common *common = ath5k_hw_common(ah);
+ int ret, ani_mode;
+ bool fast = chan && modparam_fastchanswitch ? 1 : 0;
+
+ ATH5K_DBG(ah, ATH5K_DEBUG_RESET, "resetting\n");
+
+ __set_bit(ATH_STAT_RESET, ah->status);
+
+ ath5k_hw_set_imr(ah, 0);
+ synchronize_irq(ah->irq);
+ ath5k_stop_tasklets(ah);
+
+ /* Save ani mode and disable ANI during
+ * reset. If we don't we might get false
+ * PHY error interrupts. */
+ ani_mode = ah->ani_state.ani_mode;
+ ath5k_ani_init(ah, ATH5K_ANI_MODE_OFF);
+
+ /* We are going to empty hw queues
+ * so we should also free any remaining
+ * tx buffers */
+ ath5k_drain_tx_buffs(ah);
+
+ /* Stop PCU */
+ ath5k_hw_stop_rx_pcu(ah);
+
+ /* Stop DMA
+ *
+ * Note: If DMA didn't stop continue
+ * since only a reset will fix it.
+ */
+ ret = ath5k_hw_dma_stop(ah);
+
+ /* RF Bus grant won't work if we have pending
+ * frames
+ */
+ if (ret && fast) {
+ ATH5K_DBG(ah, ATH5K_DEBUG_RESET,
+ "DMA didn't stop, falling back to normal reset\n");
+ fast = false;
+ }
+
+ if (chan)
+ ah->curchan = chan;
+
+ ret = ath5k_hw_reset(ah, ah->opmode, ah->curchan, fast, skip_pcu);
+ if (ret) {
+ ATH5K_ERR(ah, "can't reset hardware (%d)\n", ret);
+ goto err;
+ }
+
+ ret = ath5k_rx_start(ah);
+ if (ret) {
+ ATH5K_ERR(ah, "can't start recv logic\n");
+ goto err;
+ }
+
+ ath5k_ani_init(ah, ani_mode);
+
+ /*
+ * Set calibration intervals
+ *
+ * Note: We don't need to run calibration imediately
+ * since some initial calibration is done on reset
+ * even for fast channel switching. Also on scanning
+ * this will get set again and again and it won't get
+ * executed unless we connect somewhere and spend some
+ * time on the channel (that's what calibration needs
+ * anyway to be accurate).
+ */
+ ah->ah_cal_next_full = jiffies +
+ msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_FULL);
+ ah->ah_cal_next_ani = jiffies +
+ msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_ANI);
+ ah->ah_cal_next_short = jiffies +
+ msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_SHORT);
+
+ ewma_init(&ah->ah_beacon_rssi_avg, 1024, 8);
+
+ /* clear survey data and cycle counters */
+ memset(&ah->survey, 0, sizeof(ah->survey));
+ spin_lock_bh(&common->cc_lock);
+ ath_hw_cycle_counters_update(common);
+ memset(&common->cc_survey, 0, sizeof(common->cc_survey));
+ memset(&common->cc_ani, 0, sizeof(common->cc_ani));
+ spin_unlock_bh(&common->cc_lock);
+
+ /*
+ * Change channels and update the h/w rate map if we're switching;
+ * e.g. 11a to 11b/g.
+ *
+ * We may be doing a reset in response to an ioctl that changes the
+ * channel so update any state that might change as a result.
+ *
+ * XXX needed?
+ */
+/* ath5k_chan_change(ah, c); */
+
+ __clear_bit(ATH_STAT_RESET, ah->status);
+
+ ath5k_beacon_config(ah);
+ /* intrs are enabled by ath5k_beacon_config */
+
+ ieee80211_wake_queues(ah->hw);
+
+ return 0;
+err:
+ return ret;
+}
+
+static void ath5k_reset_work(struct work_struct *work)
+{
+ struct ath5k_hw *ah = container_of(work, struct ath5k_hw,
+ reset_work);
+
+ mutex_lock(&ah->lock);
+ ath5k_reset(ah, NULL, true);
+ mutex_unlock(&ah->lock);
+}
+
+static int
+ath5k_init(struct ieee80211_hw *hw)
+{
+
+ struct ath5k_hw *ah = hw->priv;
+ struct ath_regulatory *regulatory = ath5k_hw_regulatory(ah);
+ struct ath5k_txq *txq;
+ u8 mac[ETH_ALEN] = {};
+ int ret;
+
+
+ /*
+ * Collect the channel list. The 802.11 layer
+ * is responsible for filtering this list based
+ * on settings like the phy mode and regulatory
+ * domain restrictions.
+ */
+ ret = ath5k_setup_bands(hw);
+ if (ret) {
+ ATH5K_ERR(ah, "can't get channels\n");
+ goto err;
+ }
+
+ /*
+ * Allocate tx+rx descriptors and populate the lists.
+ */
+ ret = ath5k_desc_alloc(ah);
+ if (ret) {
+ ATH5K_ERR(ah, "can't allocate descriptors\n");
+ goto err;
+ }
+
+ /*
+ * Allocate hardware transmit queues: one queue for
+ * beacon frames and one data queue for each QoS
+ * priority. Note that hw functions handle resetting
+ * these queues at the needed time.
+ */
+ ret = ath5k_beaconq_setup(ah);
+ if (ret < 0) {
+ ATH5K_ERR(ah, "can't setup a beacon xmit queue\n");
+ goto err_desc;
+ }
+ ah->bhalq = ret;
+ ah->cabq = ath5k_txq_setup(ah, AR5K_TX_QUEUE_CAB, 0);
+ if (IS_ERR(ah->cabq)) {
+ ATH5K_ERR(ah, "can't setup cab queue\n");
+ ret = PTR_ERR(ah->cabq);
+ goto err_bhal;
+ }
+
+ /* 5211 and 5212 usually support 10 queues but we better rely on the
+ * capability information */
+ if (ah->ah_capabilities.cap_queues.q_tx_num >= 6) {
+ /* This order matches mac80211's queue priority, so we can
+ * directly use the mac80211 queue number without any mapping */
+ txq = ath5k_txq_setup(ah, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_VO);
+ if (IS_ERR(txq)) {
+ ATH5K_ERR(ah, "can't setup xmit queue\n");
+ ret = PTR_ERR(txq);
+ goto err_queues;
+ }
+ txq = ath5k_txq_setup(ah, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_VI);
+ if (IS_ERR(txq)) {
+ ATH5K_ERR(ah, "can't setup xmit queue\n");
+ ret = PTR_ERR(txq);
+ goto err_queues;
+ }
+ txq = ath5k_txq_setup(ah, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_BE);
+ if (IS_ERR(txq)) {
+ ATH5K_ERR(ah, "can't setup xmit queue\n");
+ ret = PTR_ERR(txq);
+ goto err_queues;
+ }
+ txq = ath5k_txq_setup(ah, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_BK);
+ if (IS_ERR(txq)) {
+ ATH5K_ERR(ah, "can't setup xmit queue\n");
+ ret = PTR_ERR(txq);
+ goto err_queues;
+ }
+ hw->queues = 4;
+ } else {
+ /* older hardware (5210) can only support one data queue */
+ txq = ath5k_txq_setup(ah, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_BE);
+ if (IS_ERR(txq)) {
+ ATH5K_ERR(ah, "can't setup xmit queue\n");
+ ret = PTR_ERR(txq);
+ goto err_queues;
+ }
+ hw->queues = 1;
+ }
+
+ tasklet_init(&ah->rxtq, ath5k_tasklet_rx, (unsigned long)ah);
+ tasklet_init(&ah->txtq, ath5k_tasklet_tx, (unsigned long)ah);
+ tasklet_init(&ah->beacontq, ath5k_tasklet_beacon, (unsigned long)ah);
+ tasklet_init(&ah->ani_tasklet, ath5k_tasklet_ani, (unsigned long)ah);
+
+ INIT_WORK(&ah->reset_work, ath5k_reset_work);
+ INIT_WORK(&ah->calib_work, ath5k_calibrate_work);
+ INIT_DELAYED_WORK(&ah->tx_complete_work, ath5k_tx_complete_poll_work);
+
+ ret = ath5k_hw_common(ah)->bus_ops->eeprom_read_mac(ah, mac);
+ if (ret) {
+ ATH5K_ERR(ah, "unable to read address from EEPROM\n");
+ goto err_queues;
+ }
+
+ SET_IEEE80211_PERM_ADDR(hw, mac);
+ /* All MAC address bits matter for ACKs */
+ ath5k_update_bssid_mask_and_opmode(ah, NULL);
+
+ regulatory->current_rd = ah->ah_capabilities.cap_eeprom.ee_regdomain;
+ ret = ath_regd_init(regulatory, hw->wiphy, ath5k_reg_notifier);
+ if (ret) {
+ ATH5K_ERR(ah, "can't initialize regulatory system\n");
+ goto err_queues;
+ }
+
+ ret = ieee80211_register_hw(hw);
+ if (ret) {
+ ATH5K_ERR(ah, "can't register ieee80211 hw\n");
+ goto err_queues;
+ }
+
+ if (!ath_is_world_regd(regulatory))
+ regulatory_hint(hw->wiphy, regulatory->alpha2);
+
+ ath5k_init_leds(ah);
+
+ ath5k_sysfs_register(ah);
+
+ return 0;
+err_queues:
+ ath5k_txq_release(ah);
+err_bhal:
+ ath5k_hw_release_tx_queue(ah, ah->bhalq);
+err_desc:
+ ath5k_desc_free(ah);
+err:
+ return ret;
+}
+
+void
+ath5k_deinit_ah(struct ath5k_hw *ah)
+{
+ struct ieee80211_hw *hw = ah->hw;
+
+ /*
+ * NB: the order of these is important:
+ * o call the 802.11 layer before detaching ath5k_hw to
+ * ensure callbacks into the driver to delete global
+ * key cache entries can be handled
+ * o reclaim the tx queue data structures after calling
+ * the 802.11 layer as we'll get called back to reclaim
+ * node state and potentially want to use them
+ * o to cleanup the tx queues the hal is called, so detach
+ * it last
+ * XXX: ??? detach ath5k_hw ???
+ * Other than that, it's straightforward...
+ */
+ ieee80211_unregister_hw(hw);
+ ath5k_desc_free(ah);
+ ath5k_txq_release(ah);
+ ath5k_hw_release_tx_queue(ah, ah->bhalq);
+ ath5k_unregister_leds(ah);
+
+ ath5k_sysfs_unregister(ah);
+ /*
+ * NB: can't reclaim these until after ieee80211_ifdetach
+ * returns because we'll get called back to reclaim node
+ * state and potentially want to use them.
+ */
+ ath5k_hw_deinit(ah);
+ free_irq(ah->irq, ah);
+}
+
+bool
+ath5k_any_vif_assoc(struct ath5k_hw *ah)
+{
+ struct ath5k_vif_iter_data iter_data;
+ iter_data.hw_macaddr = NULL;
+ iter_data.any_assoc = false;
+ iter_data.need_set_hw_addr = false;
+ iter_data.found_active = true;
+
+ ieee80211_iterate_active_interfaces_atomic(
+ ah->hw, IEEE80211_IFACE_ITER_RESUME_ALL,
+ ath5k_vif_iter, &iter_data);
+ return iter_data.any_assoc;
+}
+
+void
+ath5k_set_beacon_filter(struct ieee80211_hw *hw, bool enable)
+{
+ struct ath5k_hw *ah = hw->priv;
+ u32 rfilt;
+ rfilt = ath5k_hw_get_rx_filter(ah);
+ if (enable)
+ rfilt |= AR5K_RX_FILTER_BEACON;
+ else
+ rfilt &= ~AR5K_RX_FILTER_BEACON;
+ ath5k_hw_set_rx_filter(ah, rfilt);
+ ah->filter_flags = rfilt;
+}
+
+void _ath5k_printk(const struct ath5k_hw *ah, const char *level,
+ const char *fmt, ...)
+{
+ struct va_format vaf;
+ va_list args;
+
+ va_start(args, fmt);
+
+ vaf.fmt = fmt;
+ vaf.va = &args;
+
+ if (ah && ah->hw)
+ printk("%s" pr_fmt("%s: %pV"),
+ level, wiphy_name(ah->hw->wiphy), &vaf);
+ else
+ printk("%s" pr_fmt("%pV"), level, &vaf);
+
+ va_end(args);
+}