diff options
Diffstat (limited to 'kernel/drivers/net/wireless/at76c50x-usb.c')
| -rw-r--r-- | kernel/drivers/net/wireless/at76c50x-usb.c | 2617 |
1 files changed, 2617 insertions, 0 deletions
diff --git a/kernel/drivers/net/wireless/at76c50x-usb.c b/kernel/drivers/net/wireless/at76c50x-usb.c new file mode 100644 index 000000000..49219c508 --- /dev/null +++ b/kernel/drivers/net/wireless/at76c50x-usb.c @@ -0,0 +1,2617 @@ +/* + * at76c503/at76c505 USB driver + * + * Copyright (c) 2002 - 2003 Oliver Kurth + * Copyright (c) 2004 Joerg Albert <joerg.albert@gmx.de> + * Copyright (c) 2004 Nick Jones + * Copyright (c) 2004 Balint Seeber <n0_5p4m_p13453@hotmail.com> + * Copyright (c) 2007 Guido Guenther <agx@sigxcpu.org> + * Copyright (c) 2007 Kalle Valo <kalle.valo@iki.fi> + * Copyright (c) 2010 Sebastian Smolorz <sesmo@gmx.net> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is part of the Berlios driver for WLAN USB devices based on the + * Atmel AT76C503A/505/505A. + * + * Some iw_handler code was taken from airo.c, (C) 1999 Benjamin Reed + * + * TODO list is at the wiki: + * + * http://wireless.kernel.org/en/users/Drivers/at76c50x-usb#TODO + * + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/list.h> +#include <linux/usb.h> +#include <linux/netdevice.h> +#include <linux/if_arp.h> +#include <linux/etherdevice.h> +#include <linux/ethtool.h> +#include <linux/wireless.h> +#include <net/iw_handler.h> +#include <net/ieee80211_radiotap.h> +#include <linux/firmware.h> +#include <linux/leds.h> +#include <net/mac80211.h> + +#include "at76c50x-usb.h" + +/* Version information */ +#define DRIVER_NAME "at76c50x-usb" +#define DRIVER_VERSION "0.17" +#define DRIVER_DESC "Atmel at76x USB Wireless LAN Driver" + +/* at76_debug bits */ +#define DBG_PROGRESS 0x00000001 /* authentication/accociation */ +#define DBG_BSS_TABLE 0x00000002 /* show BSS table after scans */ +#define DBG_IOCTL 0x00000004 /* ioctl calls / settings */ +#define DBG_MAC_STATE 0x00000008 /* MAC state transitions */ +#define DBG_TX_DATA 0x00000010 /* tx header */ +#define DBG_TX_DATA_CONTENT 0x00000020 /* tx content */ +#define DBG_TX_MGMT 0x00000040 /* tx management */ +#define DBG_RX_DATA 0x00000080 /* rx data header */ +#define DBG_RX_DATA_CONTENT 0x00000100 /* rx data content */ +#define DBG_RX_MGMT 0x00000200 /* rx mgmt frame headers */ +#define DBG_RX_BEACON 0x00000400 /* rx beacon */ +#define DBG_RX_CTRL 0x00000800 /* rx control */ +#define DBG_RX_MGMT_CONTENT 0x00001000 /* rx mgmt content */ +#define DBG_RX_FRAGS 0x00002000 /* rx data fragment handling */ +#define DBG_DEVSTART 0x00004000 /* fw download, device start */ +#define DBG_URB 0x00008000 /* rx urb status, ... */ +#define DBG_RX_ATMEL_HDR 0x00010000 /* Atmel-specific Rx headers */ +#define DBG_PROC_ENTRY 0x00020000 /* procedure entries/exits */ +#define DBG_PM 0x00040000 /* power management settings */ +#define DBG_BSS_MATCH 0x00080000 /* BSS match failures */ +#define DBG_PARAMS 0x00100000 /* show configured parameters */ +#define DBG_WAIT_COMPLETE 0x00200000 /* command completion */ +#define DBG_RX_FRAGS_SKB 0x00400000 /* skb header of Rx fragments */ +#define DBG_BSS_TABLE_RM 0x00800000 /* purging bss table entries */ +#define DBG_MONITOR_MODE 0x01000000 /* monitor mode */ +#define DBG_MIB 0x02000000 /* dump all MIBs on startup */ +#define DBG_MGMT_TIMER 0x04000000 /* dump mgmt_timer ops */ +#define DBG_WE_EVENTS 0x08000000 /* dump wireless events */ +#define DBG_FW 0x10000000 /* firmware download */ +#define DBG_DFU 0x20000000 /* device firmware upgrade */ +#define DBG_CMD 0x40000000 +#define DBG_MAC80211 0x80000000 + +#define DBG_DEFAULTS 0 + +/* Use our own dbg macro */ +#define at76_dbg(bits, format, arg...) \ +do { \ + if (at76_debug & (bits)) \ + printk(KERN_DEBUG DRIVER_NAME ": " format "\n", ##arg); \ +} while (0) + +#define at76_dbg_dump(bits, buf, len, format, arg...) \ +do { \ + if (at76_debug & (bits)) { \ + printk(KERN_DEBUG DRIVER_NAME ": " format "\n", ##arg); \ + print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, buf, len); \ + } \ +} while (0) + +static uint at76_debug = DBG_DEFAULTS; + +/* Protect against concurrent firmware loading and parsing */ +static struct mutex fw_mutex; + +static struct fwentry firmwares[] = { + [0] = { "" }, + [BOARD_503_ISL3861] = { "atmel_at76c503-i3861.bin" }, + [BOARD_503_ISL3863] = { "atmel_at76c503-i3863.bin" }, + [BOARD_503] = { "atmel_at76c503-rfmd.bin" }, + [BOARD_503_ACC] = { "atmel_at76c503-rfmd-acc.bin" }, + [BOARD_505] = { "atmel_at76c505-rfmd.bin" }, + [BOARD_505_2958] = { "atmel_at76c505-rfmd2958.bin" }, + [BOARD_505A] = { "atmel_at76c505a-rfmd2958.bin" }, + [BOARD_505AMX] = { "atmel_at76c505amx-rfmd.bin" }, +}; +MODULE_FIRMWARE("atmel_at76c503-i3861.bin"); +MODULE_FIRMWARE("atmel_at76c503-i3863.bin"); +MODULE_FIRMWARE("atmel_at76c503-rfmd.bin"); +MODULE_FIRMWARE("atmel_at76c503-rfmd-acc.bin"); +MODULE_FIRMWARE("atmel_at76c505-rfmd.bin"); +MODULE_FIRMWARE("atmel_at76c505-rfmd2958.bin"); +MODULE_FIRMWARE("atmel_at76c505a-rfmd2958.bin"); +MODULE_FIRMWARE("atmel_at76c505amx-rfmd.bin"); + +#define USB_DEVICE_DATA(__ops) .driver_info = (kernel_ulong_t)(__ops) + +static struct usb_device_id dev_table[] = { + /* + * at76c503-i3861 + */ + /* Generic AT76C503/3861 device */ + { USB_DEVICE(0x03eb, 0x7603), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + /* Linksys WUSB11 v2.1/v2.6 */ + { USB_DEVICE(0x066b, 0x2211), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + /* Netgear MA101 rev. A */ + { USB_DEVICE(0x0864, 0x4100), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + /* Tekram U300C / Allnet ALL0193 */ + { USB_DEVICE(0x0b3b, 0x1612), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + /* HP HN210W J7801A */ + { USB_DEVICE(0x03f0, 0x011c), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + /* Sitecom/Z-Com/Zyxel M4Y-750 */ + { USB_DEVICE(0x0cde, 0x0001), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + /* Dynalink/Askey WLL013 (intersil) */ + { USB_DEVICE(0x069a, 0x0320), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + /* EZ connect 11Mpbs Wireless USB Adapter SMC2662W v1 */ + { USB_DEVICE(0x0d5c, 0xa001), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + /* BenQ AWL300 */ + { USB_DEVICE(0x04a5, 0x9000), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + /* Addtron AWU-120, Compex WLU11 */ + { USB_DEVICE(0x05dd, 0xff31), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + /* Intel AP310 AnyPoint II USB */ + { USB_DEVICE(0x8086, 0x0200), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + /* Dynalink L11U */ + { USB_DEVICE(0x0d8e, 0x7100), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + /* Arescom WL-210, FCC id 07J-GL2411USB */ + { USB_DEVICE(0x0d8e, 0x7110), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + /* I-O DATA WN-B11/USB */ + { USB_DEVICE(0x04bb, 0x0919), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + /* BT Voyager 1010 */ + { USB_DEVICE(0x069a, 0x0821), USB_DEVICE_DATA(BOARD_503_ISL3861) }, + /* + * at76c503-i3863 + */ + /* Generic AT76C503/3863 device */ + { USB_DEVICE(0x03eb, 0x7604), USB_DEVICE_DATA(BOARD_503_ISL3863) }, + /* Samsung SWL-2100U */ + { USB_DEVICE(0x055d, 0xa000), USB_DEVICE_DATA(BOARD_503_ISL3863) }, + /* + * at76c503-rfmd + */ + /* Generic AT76C503/RFMD device */ + { USB_DEVICE(0x03eb, 0x7605), USB_DEVICE_DATA(BOARD_503) }, + /* Dynalink/Askey WLL013 (rfmd) */ + { USB_DEVICE(0x069a, 0x0321), USB_DEVICE_DATA(BOARD_503) }, + /* Linksys WUSB11 v2.6 */ + { USB_DEVICE(0x077b, 0x2219), USB_DEVICE_DATA(BOARD_503) }, + /* Network Everywhere NWU11B */ + { USB_DEVICE(0x077b, 0x2227), USB_DEVICE_DATA(BOARD_503) }, + /* Netgear MA101 rev. B */ + { USB_DEVICE(0x0864, 0x4102), USB_DEVICE_DATA(BOARD_503) }, + /* D-Link DWL-120 rev. E */ + { USB_DEVICE(0x2001, 0x3200), USB_DEVICE_DATA(BOARD_503) }, + /* Actiontec 802UAT1, HWU01150-01UK */ + { USB_DEVICE(0x1668, 0x7605), USB_DEVICE_DATA(BOARD_503) }, + /* AirVast W-Buddie WN210 */ + { USB_DEVICE(0x03eb, 0x4102), USB_DEVICE_DATA(BOARD_503) }, + /* Dick Smith Electronics XH1153 802.11b USB adapter */ + { USB_DEVICE(0x1371, 0x5743), USB_DEVICE_DATA(BOARD_503) }, + /* CNet CNUSB611 */ + { USB_DEVICE(0x1371, 0x0001), USB_DEVICE_DATA(BOARD_503) }, + /* FiberLine FL-WL200U */ + { USB_DEVICE(0x1371, 0x0002), USB_DEVICE_DATA(BOARD_503) }, + /* BenQ AWL400 USB stick */ + { USB_DEVICE(0x04a5, 0x9001), USB_DEVICE_DATA(BOARD_503) }, + /* 3Com 3CRSHEW696 */ + { USB_DEVICE(0x0506, 0x0a01), USB_DEVICE_DATA(BOARD_503) }, + /* Siemens Santis ADSL WLAN USB adapter WLL 013 */ + { USB_DEVICE(0x0681, 0x001b), USB_DEVICE_DATA(BOARD_503) }, + /* Belkin F5D6050, version 2 */ + { USB_DEVICE(0x050d, 0x0050), USB_DEVICE_DATA(BOARD_503) }, + /* iBlitzz, BWU613 (not *B or *SB) */ + { USB_DEVICE(0x07b8, 0xb000), USB_DEVICE_DATA(BOARD_503) }, + /* Gigabyte GN-WLBM101 */ + { USB_DEVICE(0x1044, 0x8003), USB_DEVICE_DATA(BOARD_503) }, + /* Planex GW-US11S */ + { USB_DEVICE(0x2019, 0x3220), USB_DEVICE_DATA(BOARD_503) }, + /* Internal WLAN adapter in h5[4,5]xx series iPAQs */ + { USB_DEVICE(0x049f, 0x0032), USB_DEVICE_DATA(BOARD_503) }, + /* Corega Wireless LAN USB-11 mini */ + { USB_DEVICE(0x07aa, 0x0011), USB_DEVICE_DATA(BOARD_503) }, + /* Corega Wireless LAN USB-11 mini2 */ + { USB_DEVICE(0x07aa, 0x0018), USB_DEVICE_DATA(BOARD_503) }, + /* Uniden PCW100 */ + { USB_DEVICE(0x05dd, 0xff35), USB_DEVICE_DATA(BOARD_503) }, + /* + * at76c503-rfmd-acc + */ + /* SMC2664W */ + { USB_DEVICE(0x083a, 0x3501), USB_DEVICE_DATA(BOARD_503_ACC) }, + /* Belkin F5D6050, SMC2662W v2, SMC2662W-AR */ + { USB_DEVICE(0x0d5c, 0xa002), USB_DEVICE_DATA(BOARD_503_ACC) }, + /* + * at76c505-rfmd + */ + /* Generic AT76C505/RFMD */ + { USB_DEVICE(0x03eb, 0x7606), USB_DEVICE_DATA(BOARD_505) }, + /* + * at76c505-rfmd2958 + */ + /* Generic AT76C505/RFMD, OvisLink WL-1130USB */ + { USB_DEVICE(0x03eb, 0x7613), USB_DEVICE_DATA(BOARD_505_2958) }, + /* Fiberline FL-WL240U */ + { USB_DEVICE(0x1371, 0x0014), USB_DEVICE_DATA(BOARD_505_2958) }, + /* CNet CNUSB-611G */ + { USB_DEVICE(0x1371, 0x0013), USB_DEVICE_DATA(BOARD_505_2958) }, + /* Linksys WUSB11 v2.8 */ + { USB_DEVICE(0x1915, 0x2233), USB_DEVICE_DATA(BOARD_505_2958) }, + /* Xterasys XN-2122B, IBlitzz BWU613B/BWU613SB */ + { USB_DEVICE(0x12fd, 0x1001), USB_DEVICE_DATA(BOARD_505_2958) }, + /* Corega WLAN USB Stick 11 */ + { USB_DEVICE(0x07aa, 0x7613), USB_DEVICE_DATA(BOARD_505_2958) }, + /* Microstar MSI Box MS6978 */ + { USB_DEVICE(0x0db0, 0x1020), USB_DEVICE_DATA(BOARD_505_2958) }, + /* + * at76c505a-rfmd2958 + */ + /* Generic AT76C505A device */ + { USB_DEVICE(0x03eb, 0x7614), USB_DEVICE_DATA(BOARD_505A) }, + /* Generic AT76C505AS device */ + { USB_DEVICE(0x03eb, 0x7617), USB_DEVICE_DATA(BOARD_505A) }, + /* Siemens Gigaset USB WLAN Adapter 11 */ + { USB_DEVICE(0x1690, 0x0701), USB_DEVICE_DATA(BOARD_505A) }, + /* OQO Model 01+ Internal Wi-Fi */ + { USB_DEVICE(0x1557, 0x0002), USB_DEVICE_DATA(BOARD_505A) }, + /* + * at76c505amx-rfmd + */ + /* Generic AT76C505AMX device */ + { USB_DEVICE(0x03eb, 0x7615), USB_DEVICE_DATA(BOARD_505AMX) }, + { } +}; + +MODULE_DEVICE_TABLE(usb, dev_table); + +/* Supported rates of this hardware, bit 7 marks basic rates */ +static const u8 hw_rates[] = { 0x82, 0x84, 0x0b, 0x16 }; + +static const char *const preambles[] = { "long", "short", "auto" }; + +/* Firmware download */ +/* DFU states */ +#define STATE_IDLE 0x00 +#define STATE_DETACH 0x01 +#define STATE_DFU_IDLE 0x02 +#define STATE_DFU_DOWNLOAD_SYNC 0x03 +#define STATE_DFU_DOWNLOAD_BUSY 0x04 +#define STATE_DFU_DOWNLOAD_IDLE 0x05 +#define STATE_DFU_MANIFEST_SYNC 0x06 +#define STATE_DFU_MANIFEST 0x07 +#define STATE_DFU_MANIFEST_WAIT_RESET 0x08 +#define STATE_DFU_UPLOAD_IDLE 0x09 +#define STATE_DFU_ERROR 0x0a + +/* DFU commands */ +#define DFU_DETACH 0 +#define DFU_DNLOAD 1 +#define DFU_UPLOAD 2 +#define DFU_GETSTATUS 3 +#define DFU_CLRSTATUS 4 +#define DFU_GETSTATE 5 +#define DFU_ABORT 6 + +#define FW_BLOCK_SIZE 1024 + +struct dfu_status { + unsigned char status; + unsigned char poll_timeout[3]; + unsigned char state; + unsigned char string; +} __packed; + +static inline int at76_is_intersil(enum board_type board) +{ + return (board == BOARD_503_ISL3861 || board == BOARD_503_ISL3863); +} + +static inline int at76_is_503rfmd(enum board_type board) +{ + return (board == BOARD_503 || board == BOARD_503_ACC); +} + +static inline int at76_is_505a(enum board_type board) +{ + return (board == BOARD_505A || board == BOARD_505AMX); +} + +/* Load a block of the first (internal) part of the firmware */ +static int at76_load_int_fw_block(struct usb_device *udev, int blockno, + void *block, int size) +{ + return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), DFU_DNLOAD, + USB_TYPE_CLASS | USB_DIR_OUT | + USB_RECIP_INTERFACE, blockno, 0, block, size, + USB_CTRL_GET_TIMEOUT); +} + +static int at76_dfu_get_status(struct usb_device *udev, + struct dfu_status *status) +{ + int ret; + + ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), DFU_GETSTATUS, + USB_TYPE_CLASS | USB_DIR_IN | USB_RECIP_INTERFACE, + 0, 0, status, sizeof(struct dfu_status), + USB_CTRL_GET_TIMEOUT); + return ret; +} + +static int at76_dfu_get_state(struct usb_device *udev, u8 *state) +{ + int ret; + + ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), DFU_GETSTATE, + USB_TYPE_CLASS | USB_DIR_IN | USB_RECIP_INTERFACE, + 0, 0, state, 1, USB_CTRL_GET_TIMEOUT); + return ret; +} + +/* Convert timeout from the DFU status to jiffies */ +static inline unsigned long at76_get_timeout(struct dfu_status *s) +{ + return msecs_to_jiffies((s->poll_timeout[2] << 16) + | (s->poll_timeout[1] << 8) + | (s->poll_timeout[0])); +} + +/* Load internal firmware from the buffer. If manifest_sync_timeout > 0, use + * its value in jiffies in the MANIFEST_SYNC state. */ +static int at76_usbdfu_download(struct usb_device *udev, u8 *buf, u32 size, + int manifest_sync_timeout) +{ + int ret = 0; + int need_dfu_state = 1; + int is_done = 0; + u32 dfu_timeout = 0; + int bsize = 0; + int blockno = 0; + struct dfu_status *dfu_stat_buf = NULL; + u8 *dfu_state = NULL; + u8 *block = NULL; + + at76_dbg(DBG_DFU, "%s( %p, %u, %d)", __func__, buf, size, + manifest_sync_timeout); + + if (!size) { + dev_err(&udev->dev, "FW buffer length invalid!\n"); + return -EINVAL; + } + + dfu_stat_buf = kmalloc(sizeof(struct dfu_status), GFP_KERNEL); + if (!dfu_stat_buf) { + ret = -ENOMEM; + goto exit; + } + + block = kmalloc(FW_BLOCK_SIZE, GFP_KERNEL); + if (!block) { + ret = -ENOMEM; + goto exit; + } + + dfu_state = kmalloc(sizeof(u8), GFP_KERNEL); + if (!dfu_state) { + ret = -ENOMEM; + goto exit; + } + *dfu_state = 0; + + do { + if (need_dfu_state) { + ret = at76_dfu_get_state(udev, dfu_state); + if (ret < 0) { + dev_err(&udev->dev, + "cannot get DFU state: %d\n", ret); + goto exit; + } + need_dfu_state = 0; + } + + switch (*dfu_state) { + case STATE_DFU_DOWNLOAD_SYNC: + at76_dbg(DBG_DFU, "STATE_DFU_DOWNLOAD_SYNC"); + ret = at76_dfu_get_status(udev, dfu_stat_buf); + if (ret >= 0) { + *dfu_state = dfu_stat_buf->state; + dfu_timeout = at76_get_timeout(dfu_stat_buf); + need_dfu_state = 0; + } else + dev_err(&udev->dev, + "at76_dfu_get_status returned %d\n", + ret); + break; + + case STATE_DFU_DOWNLOAD_BUSY: + at76_dbg(DBG_DFU, "STATE_DFU_DOWNLOAD_BUSY"); + need_dfu_state = 1; + + at76_dbg(DBG_DFU, "DFU: Resetting device"); + schedule_timeout_interruptible(dfu_timeout); + break; + + case STATE_DFU_DOWNLOAD_IDLE: + at76_dbg(DBG_DFU, "DOWNLOAD..."); + /* fall through */ + case STATE_DFU_IDLE: + at76_dbg(DBG_DFU, "DFU IDLE"); + + bsize = min_t(int, size, FW_BLOCK_SIZE); + memcpy(block, buf, bsize); + at76_dbg(DBG_DFU, "int fw, size left = %5d, " + "bsize = %4d, blockno = %2d", size, bsize, + blockno); + ret = + at76_load_int_fw_block(udev, blockno, block, bsize); + buf += bsize; + size -= bsize; + blockno++; + + if (ret != bsize) + dev_err(&udev->dev, + "at76_load_int_fw_block returned %d\n", + ret); + need_dfu_state = 1; + break; + + case STATE_DFU_MANIFEST_SYNC: + at76_dbg(DBG_DFU, "STATE_DFU_MANIFEST_SYNC"); + + ret = at76_dfu_get_status(udev, dfu_stat_buf); + if (ret < 0) + break; + + *dfu_state = dfu_stat_buf->state; + dfu_timeout = at76_get_timeout(dfu_stat_buf); + need_dfu_state = 0; + + /* override the timeout from the status response, + needed for AT76C505A */ + if (manifest_sync_timeout > 0) + dfu_timeout = manifest_sync_timeout; + + at76_dbg(DBG_DFU, "DFU: Waiting for manifest phase"); + schedule_timeout_interruptible(dfu_timeout); + break; + + case STATE_DFU_MANIFEST: + at76_dbg(DBG_DFU, "STATE_DFU_MANIFEST"); + is_done = 1; + break; + + case STATE_DFU_MANIFEST_WAIT_RESET: + at76_dbg(DBG_DFU, "STATE_DFU_MANIFEST_WAIT_RESET"); + is_done = 1; + break; + + case STATE_DFU_UPLOAD_IDLE: + at76_dbg(DBG_DFU, "STATE_DFU_UPLOAD_IDLE"); + break; + + case STATE_DFU_ERROR: + at76_dbg(DBG_DFU, "STATE_DFU_ERROR"); + ret = -EPIPE; + break; + + default: + at76_dbg(DBG_DFU, "DFU UNKNOWN STATE (%d)", *dfu_state); + ret = -EINVAL; + break; + } + } while (!is_done && (ret >= 0)); + +exit: + kfree(dfu_state); + kfree(block); + kfree(dfu_stat_buf); + + if (ret >= 0) + ret = 0; + + return ret; +} + +/* LED trigger */ +static int tx_activity; +static void at76_ledtrig_tx_timerfunc(unsigned long data); +static DEFINE_TIMER(ledtrig_tx_timer, at76_ledtrig_tx_timerfunc, 0, 0); +DEFINE_LED_TRIGGER(ledtrig_tx); + +static void at76_ledtrig_tx_timerfunc(unsigned long data) +{ + static int tx_lastactivity; + + if (tx_lastactivity != tx_activity) { + tx_lastactivity = tx_activity; + led_trigger_event(ledtrig_tx, LED_FULL); + mod_timer(&ledtrig_tx_timer, jiffies + HZ / 4); + } else + led_trigger_event(ledtrig_tx, LED_OFF); +} + +static void at76_ledtrig_tx_activity(void) +{ + tx_activity++; + if (!timer_pending(&ledtrig_tx_timer)) + mod_timer(&ledtrig_tx_timer, jiffies + HZ / 4); +} + +static int at76_remap(struct usb_device *udev) +{ + int ret; + ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x0a, + USB_TYPE_VENDOR | USB_DIR_OUT | + USB_RECIP_INTERFACE, 0, 0, NULL, 0, + USB_CTRL_GET_TIMEOUT); + if (ret < 0) + return ret; + return 0; +} + +static int at76_get_op_mode(struct usb_device *udev) +{ + int ret; + u8 saved; + u8 *op_mode; + + op_mode = kmalloc(1, GFP_NOIO); + if (!op_mode) + return -ENOMEM; + ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x33, + USB_TYPE_VENDOR | USB_DIR_IN | + USB_RECIP_INTERFACE, 0x01, 0, op_mode, 1, + USB_CTRL_GET_TIMEOUT); + saved = *op_mode; + kfree(op_mode); + + if (ret < 0) + return ret; + else if (ret < 1) + return -EIO; + else + return saved; +} + +/* Load a block of the second ("external") part of the firmware */ +static inline int at76_load_ext_fw_block(struct usb_device *udev, int blockno, + void *block, int size) +{ + return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x0e, + USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE, + 0x0802, blockno, block, size, + USB_CTRL_GET_TIMEOUT); +} + +static inline int at76_get_hw_cfg(struct usb_device *udev, + union at76_hwcfg *buf, int buf_size) +{ + return usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x33, + USB_TYPE_VENDOR | USB_DIR_IN | + USB_RECIP_INTERFACE, 0x0a02, 0, + buf, buf_size, USB_CTRL_GET_TIMEOUT); +} + +/* Intersil boards use a different "value" for GetHWConfig requests */ +static inline int at76_get_hw_cfg_intersil(struct usb_device *udev, + union at76_hwcfg *buf, int buf_size) +{ + return usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x33, + USB_TYPE_VENDOR | USB_DIR_IN | + USB_RECIP_INTERFACE, 0x0902, 0, + buf, buf_size, USB_CTRL_GET_TIMEOUT); +} + +/* Get the hardware configuration for the adapter and put it to the appropriate + * fields of 'priv' (the GetHWConfig request and interpretation of the result + * depends on the board type) */ +static int at76_get_hw_config(struct at76_priv *priv) +{ + int ret; + union at76_hwcfg *hwcfg = kmalloc(sizeof(*hwcfg), GFP_KERNEL); + + if (!hwcfg) + return -ENOMEM; + + if (at76_is_intersil(priv->board_type)) { + ret = at76_get_hw_cfg_intersil(priv->udev, hwcfg, + sizeof(hwcfg->i)); + if (ret < 0) + goto exit; + memcpy(priv->mac_addr, hwcfg->i.mac_addr, ETH_ALEN); + priv->regulatory_domain = hwcfg->i.regulatory_domain; + } else if (at76_is_503rfmd(priv->board_type)) { + ret = at76_get_hw_cfg(priv->udev, hwcfg, sizeof(hwcfg->r3)); + if (ret < 0) + goto exit; + memcpy(priv->mac_addr, hwcfg->r3.mac_addr, ETH_ALEN); + priv->regulatory_domain = hwcfg->r3.regulatory_domain; + } else { + ret = at76_get_hw_cfg(priv->udev, hwcfg, sizeof(hwcfg->r5)); + if (ret < 0) + goto exit; + memcpy(priv->mac_addr, hwcfg->r5.mac_addr, ETH_ALEN); + priv->regulatory_domain = hwcfg->r5.regulatory_domain; + } + +exit: + kfree(hwcfg); + if (ret < 0) + wiphy_err(priv->hw->wiphy, "cannot get HW Config (error %d)\n", + ret); + + return ret; +} + +static struct reg_domain const *at76_get_reg_domain(u16 code) +{ + int i; + static struct reg_domain const fd_tab[] = { + { 0x10, "FCC (USA)", 0x7ff }, /* ch 1-11 */ + { 0x20, "IC (Canada)", 0x7ff }, /* ch 1-11 */ + { 0x30, "ETSI (most of Europe)", 0x1fff }, /* ch 1-13 */ + { 0x31, "Spain", 0x600 }, /* ch 10-11 */ + { 0x32, "France", 0x1e00 }, /* ch 10-13 */ + { 0x40, "MKK (Japan)", 0x2000 }, /* ch 14 */ + { 0x41, "MKK1 (Japan)", 0x3fff }, /* ch 1-14 */ + { 0x50, "Israel", 0x3fc }, /* ch 3-9 */ + { 0x00, "<unknown>", 0xffffffff } /* ch 1-32 */ + }; + + /* Last entry is fallback for unknown domain code */ + for (i = 0; i < ARRAY_SIZE(fd_tab) - 1; i++) + if (code == fd_tab[i].code) + break; + + return &fd_tab[i]; +} + +static inline int at76_get_mib(struct usb_device *udev, u16 mib, void *buf, + int buf_size) +{ + int ret; + + ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x33, + USB_TYPE_VENDOR | USB_DIR_IN | + USB_RECIP_INTERFACE, mib << 8, 0, buf, buf_size, + USB_CTRL_GET_TIMEOUT); + if (ret >= 0 && ret != buf_size) + return -EIO; + return ret; +} + +/* Return positive number for status, negative for an error */ +static inline int at76_get_cmd_status(struct usb_device *udev, u8 cmd) +{ + u8 *stat_buf; + int ret; + + stat_buf = kmalloc(40, GFP_NOIO); + if (!stat_buf) + return -ENOMEM; + + ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x22, + USB_TYPE_VENDOR | USB_DIR_IN | + USB_RECIP_INTERFACE, cmd, 0, stat_buf, + 40, USB_CTRL_GET_TIMEOUT); + if (ret >= 0) + ret = stat_buf[5]; + kfree(stat_buf); + + return ret; +} + +#define MAKE_CMD_CASE(c) case (c): return #c +static const char *at76_get_cmd_string(u8 cmd_status) +{ + switch (cmd_status) { + MAKE_CMD_CASE(CMD_SET_MIB); + MAKE_CMD_CASE(CMD_GET_MIB); + MAKE_CMD_CASE(CMD_SCAN); + MAKE_CMD_CASE(CMD_JOIN); + MAKE_CMD_CASE(CMD_START_IBSS); + MAKE_CMD_CASE(CMD_RADIO_ON); + MAKE_CMD_CASE(CMD_RADIO_OFF); + MAKE_CMD_CASE(CMD_STARTUP); + } + + return "UNKNOWN"; +} + +static int at76_set_card_command(struct usb_device *udev, u8 cmd, void *buf, + int buf_size) +{ + int ret; + struct at76_command *cmd_buf = kmalloc(sizeof(struct at76_command) + + buf_size, GFP_KERNEL); + + if (!cmd_buf) + return -ENOMEM; + + cmd_buf->cmd = cmd; + cmd_buf->reserved = 0; + cmd_buf->size = cpu_to_le16(buf_size); + memcpy(cmd_buf->data, buf, buf_size); + + at76_dbg_dump(DBG_CMD, cmd_buf, sizeof(struct at76_command) + buf_size, + "issuing command %s (0x%02x)", + at76_get_cmd_string(cmd), cmd); + + ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x0e, + USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE, + 0, 0, cmd_buf, + sizeof(struct at76_command) + buf_size, + USB_CTRL_GET_TIMEOUT); + kfree(cmd_buf); + return ret; +} + +#define MAKE_CMD_STATUS_CASE(c) case (c): return #c +static const char *at76_get_cmd_status_string(u8 cmd_status) +{ + switch (cmd_status) { + MAKE_CMD_STATUS_CASE(CMD_STATUS_IDLE); + MAKE_CMD_STATUS_CASE(CMD_STATUS_COMPLETE); + MAKE_CMD_STATUS_CASE(CMD_STATUS_UNKNOWN); + MAKE_CMD_STATUS_CASE(CMD_STATUS_INVALID_PARAMETER); + MAKE_CMD_STATUS_CASE(CMD_STATUS_FUNCTION_NOT_SUPPORTED); + MAKE_CMD_STATUS_CASE(CMD_STATUS_TIME_OUT); + MAKE_CMD_STATUS_CASE(CMD_STATUS_IN_PROGRESS); + MAKE_CMD_STATUS_CASE(CMD_STATUS_HOST_FAILURE); + MAKE_CMD_STATUS_CASE(CMD_STATUS_SCAN_FAILED); + } + + return "UNKNOWN"; +} + +/* Wait until the command is completed */ +static int at76_wait_completion(struct at76_priv *priv, int cmd) +{ + int status = 0; + unsigned long timeout = jiffies + CMD_COMPLETION_TIMEOUT; + + do { + status = at76_get_cmd_status(priv->udev, cmd); + if (status < 0) { + wiphy_err(priv->hw->wiphy, + "at76_get_cmd_status failed: %d\n", + status); + break; + } + + at76_dbg(DBG_WAIT_COMPLETE, + "%s: Waiting on cmd %d, status = %d (%s)", + wiphy_name(priv->hw->wiphy), cmd, status, + at76_get_cmd_status_string(status)); + + if (status != CMD_STATUS_IN_PROGRESS + && status != CMD_STATUS_IDLE) + break; + + schedule_timeout_interruptible(HZ / 10); /* 100 ms */ + if (time_after(jiffies, timeout)) { + wiphy_err(priv->hw->wiphy, + "completion timeout for command %d\n", cmd); + status = -ETIMEDOUT; + break; + } + } while (1); + + return status; +} + +static int at76_set_mib(struct at76_priv *priv, struct set_mib_buffer *buf) +{ + int ret; + + ret = at76_set_card_command(priv->udev, CMD_SET_MIB, buf, + offsetof(struct set_mib_buffer, + data) + buf->size); + if (ret < 0) + return ret; + + ret = at76_wait_completion(priv, CMD_SET_MIB); + if (ret != CMD_STATUS_COMPLETE) { + wiphy_info(priv->hw->wiphy, + "set_mib: at76_wait_completion failed with %d\n", + ret); + ret = -EIO; + } + + return ret; +} + +/* Return < 0 on error, == 0 if no command sent, == 1 if cmd sent */ +static int at76_set_radio(struct at76_priv *priv, int enable) +{ + int ret; + int cmd; + + if (priv->radio_on == enable) + return 0; + + cmd = enable ? CMD_RADIO_ON : CMD_RADIO_OFF; + + ret = at76_set_card_command(priv->udev, cmd, NULL, 0); + if (ret < 0) + wiphy_err(priv->hw->wiphy, + "at76_set_card_command(%d) failed: %d\n", cmd, ret); + else + ret = 1; + + priv->radio_on = enable; + return ret; +} + +/* Set current power save mode (AT76_PM_OFF/AT76_PM_ON/AT76_PM_SMART) */ +static int at76_set_pm_mode(struct at76_priv *priv) +{ + int ret = 0; + + priv->mib_buf.type = MIB_MAC_MGMT; + priv->mib_buf.size = 1; + priv->mib_buf.index = offsetof(struct mib_mac_mgmt, power_mgmt_mode); + priv->mib_buf.data.byte = priv->pm_mode; + + ret = at76_set_mib(priv, &priv->mib_buf); + if (ret < 0) + wiphy_err(priv->hw->wiphy, "set_mib (pm_mode) failed: %d\n", + ret); + + return ret; +} + +static int at76_set_preamble(struct at76_priv *priv, u8 type) +{ + int ret = 0; + + priv->mib_buf.type = MIB_LOCAL; + priv->mib_buf.size = 1; + priv->mib_buf.index = offsetof(struct mib_local, preamble_type); + priv->mib_buf.data.byte = type; + + ret = at76_set_mib(priv, &priv->mib_buf); + if (ret < 0) + wiphy_err(priv->hw->wiphy, "set_mib (preamble) failed: %d\n", + ret); + + return ret; +} + +static int at76_set_frag(struct at76_priv *priv, u16 size) +{ + int ret = 0; + + priv->mib_buf.type = MIB_MAC; + priv->mib_buf.size = 2; + priv->mib_buf.index = offsetof(struct mib_mac, frag_threshold); + priv->mib_buf.data.word = cpu_to_le16(size); + + ret = at76_set_mib(priv, &priv->mib_buf); + if (ret < 0) + wiphy_err(priv->hw->wiphy, + "set_mib (frag threshold) failed: %d\n", ret); + + return ret; +} + +static int at76_set_rts(struct at76_priv *priv, u16 size) +{ + int ret = 0; + + priv->mib_buf.type = MIB_MAC; + priv->mib_buf.size = 2; + priv->mib_buf.index = offsetof(struct mib_mac, rts_threshold); + priv->mib_buf.data.word = cpu_to_le16(size); + + ret = at76_set_mib(priv, &priv->mib_buf); + if (ret < 0) + wiphy_err(priv->hw->wiphy, "set_mib (rts) failed: %d\n", ret); + + return ret; +} + +static int at76_set_autorate_fallback(struct at76_priv *priv, int onoff) +{ + int ret = 0; + + priv->mib_buf.type = MIB_LOCAL; + priv->mib_buf.size = 1; + priv->mib_buf.index = offsetof(struct mib_local, txautorate_fallback); + priv->mib_buf.data.byte = onoff; + + ret = at76_set_mib(priv, &priv->mib_buf); + if (ret < 0) + wiphy_err(priv->hw->wiphy, + "set_mib (autorate fallback) failed: %d\n", ret); + + return ret; +} + +static void at76_dump_mib_mac_addr(struct at76_priv *priv) +{ + int i; + int ret; + struct mib_mac_addr *m = kmalloc(sizeof(struct mib_mac_addr), + GFP_KERNEL); + + if (!m) + return; + + ret = at76_get_mib(priv->udev, MIB_MAC_ADDR, m, + sizeof(struct mib_mac_addr)); + if (ret < 0) { + wiphy_err(priv->hw->wiphy, + "at76_get_mib (MAC_ADDR) failed: %d\n", ret); + goto exit; + } + + at76_dbg(DBG_MIB, "%s: MIB MAC_ADDR: mac_addr %pM res 0x%x 0x%x", + wiphy_name(priv->hw->wiphy), + m->mac_addr, m->res[0], m->res[1]); + for (i = 0; i < ARRAY_SIZE(m->group_addr); i++) + at76_dbg(DBG_MIB, "%s: MIB MAC_ADDR: group addr %d: %pM, " + "status %d", wiphy_name(priv->hw->wiphy), i, + m->group_addr[i], m->group_addr_status[i]); +exit: + kfree(m); +} + +static void at76_dump_mib_mac_wep(struct at76_priv *priv) +{ + int i; + int ret; + int key_len; + struct mib_mac_wep *m = kmalloc(sizeof(struct mib_mac_wep), GFP_KERNEL); + + if (!m) + return; + + ret = at76_get_mib(priv->udev, MIB_MAC_WEP, m, + sizeof(struct mib_mac_wep)); + if (ret < 0) { + wiphy_err(priv->hw->wiphy, + "at76_get_mib (MAC_WEP) failed: %d\n", ret); + goto exit; + } + + at76_dbg(DBG_MIB, "%s: MIB MAC_WEP: priv_invoked %u def_key_id %u " + "key_len %u excl_unencr %u wep_icv_err %u wep_excluded %u " + "encr_level %u key %d", wiphy_name(priv->hw->wiphy), + m->privacy_invoked, m->wep_default_key_id, + m->wep_key_mapping_len, m->exclude_unencrypted, + le32_to_cpu(m->wep_icv_error_count), + le32_to_cpu(m->wep_excluded_count), m->encryption_level, + m->wep_default_key_id); + + key_len = (m->encryption_level == 1) ? + WEP_SMALL_KEY_LEN : WEP_LARGE_KEY_LEN; + + for (i = 0; i < WEP_KEYS; i++) + at76_dbg(DBG_MIB, "%s: MIB MAC_WEP: key %d: %*phD", + wiphy_name(priv->hw->wiphy), i, + key_len, m->wep_default_keyvalue[i]); +exit: + kfree(m); +} + +static void at76_dump_mib_mac_mgmt(struct at76_priv *priv) +{ + int ret; + struct mib_mac_mgmt *m = kmalloc(sizeof(struct mib_mac_mgmt), + GFP_KERNEL); + + if (!m) + return; + + ret = at76_get_mib(priv->udev, MIB_MAC_MGMT, m, + sizeof(struct mib_mac_mgmt)); + if (ret < 0) { + wiphy_err(priv->hw->wiphy, + "at76_get_mib (MAC_MGMT) failed: %d\n", ret); + goto exit; + } + + at76_dbg(DBG_MIB, "%s: MIB MAC_MGMT: beacon_period %d CFP_max_duration " + "%d medium_occupancy_limit %d station_id 0x%x ATIM_window %d " + "CFP_mode %d privacy_opt_impl %d DTIM_period %d CFP_period %d " + "current_bssid %pM current_essid %*phD current_bss_type %d " + "pm_mode %d ibss_change %d res %d " + "multi_domain_capability_implemented %d " + "international_roaming %d country_string %.3s", + wiphy_name(priv->hw->wiphy), le16_to_cpu(m->beacon_period), + le16_to_cpu(m->CFP_max_duration), + le16_to_cpu(m->medium_occupancy_limit), + le16_to_cpu(m->station_id), le16_to_cpu(m->ATIM_window), + m->CFP_mode, m->privacy_option_implemented, m->DTIM_period, + m->CFP_period, m->current_bssid, + IW_ESSID_MAX_SIZE, m->current_essid, + m->current_bss_type, m->power_mgmt_mode, m->ibss_change, + m->res, m->multi_domain_capability_implemented, + m->multi_domain_capability_enabled, m->country_string); +exit: + kfree(m); +} + +static void at76_dump_mib_mac(struct at76_priv *priv) +{ + int ret; + struct mib_mac *m = kmalloc(sizeof(struct mib_mac), GFP_KERNEL); + + if (!m) + return; + + ret = at76_get_mib(priv->udev, MIB_MAC, m, sizeof(struct mib_mac)); + if (ret < 0) { + wiphy_err(priv->hw->wiphy, + "at76_get_mib (MAC) failed: %d\n", ret); + goto exit; + } + + at76_dbg(DBG_MIB, "%s: MIB MAC: max_tx_msdu_lifetime %d " + "max_rx_lifetime %d frag_threshold %d rts_threshold %d " + "cwmin %d cwmax %d short_retry_time %d long_retry_time %d " + "scan_type %d scan_channel %d probe_delay %u " + "min_channel_time %d max_channel_time %d listen_int %d " + "desired_ssid %*phD desired_bssid %pM desired_bsstype %d", + wiphy_name(priv->hw->wiphy), + le32_to_cpu(m->max_tx_msdu_lifetime), + le32_to_cpu(m->max_rx_lifetime), + le16_to_cpu(m->frag_threshold), le16_to_cpu(m->rts_threshold), + le16_to_cpu(m->cwmin), le16_to_cpu(m->cwmax), + m->short_retry_time, m->long_retry_time, m->scan_type, + m->scan_channel, le16_to_cpu(m->probe_delay), + le16_to_cpu(m->min_channel_time), + le16_to_cpu(m->max_channel_time), + le16_to_cpu(m->listen_interval), + IW_ESSID_MAX_SIZE, m->desired_ssid, + m->desired_bssid, m->desired_bsstype); +exit: + kfree(m); +} + +static void at76_dump_mib_phy(struct at76_priv *priv) +{ + int ret; + struct mib_phy *m = kmalloc(sizeof(struct mib_phy), GFP_KERNEL); + + if (!m) + return; + + ret = at76_get_mib(priv->udev, MIB_PHY, m, sizeof(struct mib_phy)); + if (ret < 0) { + wiphy_err(priv->hw->wiphy, + "at76_get_mib (PHY) failed: %d\n", ret); + goto exit; + } + + at76_dbg(DBG_MIB, "%s: MIB PHY: ed_threshold %d slot_time %d " + "sifs_time %d preamble_length %d plcp_header_length %d " + "mpdu_max_length %d cca_mode_supported %d operation_rate_set " + "0x%x 0x%x 0x%x 0x%x channel_id %d current_cca_mode %d " + "phy_type %d current_reg_domain %d", + wiphy_name(priv->hw->wiphy), le32_to_cpu(m->ed_threshold), + le16_to_cpu(m->slot_time), le16_to_cpu(m->sifs_time), + le16_to_cpu(m->preamble_length), + le16_to_cpu(m->plcp_header_length), + le16_to_cpu(m->mpdu_max_length), + le16_to_cpu(m->cca_mode_supported), m->operation_rate_set[0], + m->operation_rate_set[1], m->operation_rate_set[2], + m->operation_rate_set[3], m->channel_id, m->current_cca_mode, + m->phy_type, m->current_reg_domain); +exit: + kfree(m); +} + +static void at76_dump_mib_local(struct at76_priv *priv) +{ + int ret; + struct mib_local *m = kmalloc(sizeof(*m), GFP_KERNEL); + + if (!m) + return; + + ret = at76_get_mib(priv->udev, MIB_LOCAL, m, sizeof(*m)); + if (ret < 0) { + wiphy_err(priv->hw->wiphy, + "at76_get_mib (LOCAL) failed: %d\n", ret); + goto exit; + } + + at76_dbg(DBG_MIB, "%s: MIB LOCAL: beacon_enable %d " + "txautorate_fallback %d ssid_size %d promiscuous_mode %d " + "preamble_type %d", wiphy_name(priv->hw->wiphy), + m->beacon_enable, + m->txautorate_fallback, m->ssid_size, m->promiscuous_mode, + m->preamble_type); +exit: + kfree(m); +} + +static void at76_dump_mib_mdomain(struct at76_priv *priv) +{ + int ret; + struct mib_mdomain *m = kmalloc(sizeof(struct mib_mdomain), GFP_KERNEL); + + if (!m) + return; + + ret = at76_get_mib(priv->udev, MIB_MDOMAIN, m, + sizeof(struct mib_mdomain)); + if (ret < 0) { + wiphy_err(priv->hw->wiphy, + "at76_get_mib (MDOMAIN) failed: %d\n", ret); + goto exit; + } + + at76_dbg(DBG_MIB, "%s: MIB MDOMAIN: channel_list %*phD", + wiphy_name(priv->hw->wiphy), + (int)sizeof(m->channel_list), m->channel_list); + + at76_dbg(DBG_MIB, "%s: MIB MDOMAIN: tx_powerlevel %*phD", + wiphy_name(priv->hw->wiphy), + (int)sizeof(m->tx_powerlevel), m->tx_powerlevel); +exit: + kfree(m); +} + +/* Enable monitor mode */ +static int at76_start_monitor(struct at76_priv *priv) +{ + struct at76_req_scan scan; + int ret; + + memset(&scan, 0, sizeof(struct at76_req_scan)); + eth_broadcast_addr(scan.bssid); + + scan.channel = priv->channel; + scan.scan_type = SCAN_TYPE_PASSIVE; + scan.international_scan = 0; + scan.min_channel_time = cpu_to_le16(priv->scan_min_time); + scan.max_channel_time = cpu_to_le16(priv->scan_max_time); + scan.probe_delay = cpu_to_le16(0); + + ret = at76_set_card_command(priv->udev, CMD_SCAN, &scan, sizeof(scan)); + if (ret >= 0) + ret = at76_get_cmd_status(priv->udev, CMD_SCAN); + + return ret; +} + +/* Calculate padding from txbuf->wlength (which excludes the USB TX header), + likely to compensate a flaw in the AT76C503A USB part ... */ +static inline int at76_calc_padding(int wlen) +{ + /* add the USB TX header */ + wlen += AT76_TX_HDRLEN; + + wlen = wlen % 64; + + if (wlen < 50) + return 50 - wlen; + + if (wlen >= 61) + return 64 + 50 - wlen; + + return 0; +} + +static void at76_rx_callback(struct urb *urb) +{ + struct at76_priv *priv = urb->context; + + priv->rx_tasklet.data = (unsigned long)urb; + tasklet_schedule(&priv->rx_tasklet); +} + +static int at76_submit_rx_urb(struct at76_priv *priv) +{ + int ret; + int size; + struct sk_buff *skb = priv->rx_skb; + + if (!priv->rx_urb) { + wiphy_err(priv->hw->wiphy, "%s: priv->rx_urb is NULL\n", + __func__); + return -EFAULT; + } + + if (!skb) { + skb = dev_alloc_skb(sizeof(struct at76_rx_buffer)); + if (!skb) { + wiphy_err(priv->hw->wiphy, + "cannot allocate rx skbuff\n"); + ret = -ENOMEM; + goto exit; + } + priv->rx_skb = skb; + } else { + skb_push(skb, skb_headroom(skb)); + skb_trim(skb, 0); + } + + size = skb_tailroom(skb); + usb_fill_bulk_urb(priv->rx_urb, priv->udev, priv->rx_pipe, + skb_put(skb, size), size, at76_rx_callback, priv); + ret = usb_submit_urb(priv->rx_urb, GFP_ATOMIC); + if (ret < 0) { + if (ret == -ENODEV) + at76_dbg(DBG_DEVSTART, + "usb_submit_urb returned -ENODEV"); + else + wiphy_err(priv->hw->wiphy, + "rx, usb_submit_urb failed: %d\n", ret); + } + +exit: + if (ret < 0 && ret != -ENODEV) + wiphy_err(priv->hw->wiphy, + "cannot submit rx urb - please unload the driver and/or power cycle the device\n"); + + return ret; +} + +/* Download external firmware */ +static int at76_load_external_fw(struct usb_device *udev, struct fwentry *fwe) +{ + int ret; + int op_mode; + int blockno = 0; + int bsize; + u8 *block; + u8 *buf = fwe->extfw; + int size = fwe->extfw_size; + + if (!buf || !size) + return -ENOENT; + + op_mode = at76_get_op_mode(udev); + at76_dbg(DBG_DEVSTART, "opmode %d", op_mode); + + if (op_mode != OPMODE_NORMAL_NIC_WITHOUT_FLASH) { + dev_err(&udev->dev, "unexpected opmode %d\n", op_mode); + return -EINVAL; + } + + block = kmalloc(FW_BLOCK_SIZE, GFP_KERNEL); + if (!block) + return -ENOMEM; + + at76_dbg(DBG_DEVSTART, "downloading external firmware"); + + /* for fw >= 0.100, the device needs an extra empty block */ + do { + bsize = min_t(int, size, FW_BLOCK_SIZE); + memcpy(block, buf, bsize); + at76_dbg(DBG_DEVSTART, + "ext fw, size left = %5d, bsize = %4d, blockno = %2d", + size, bsize, blockno); + ret = at76_load_ext_fw_block(udev, blockno, block, bsize); + if (ret != bsize) { + dev_err(&udev->dev, + "loading %dth firmware block failed: %d\n", + blockno, ret); + ret = -EIO; + goto exit; + } + buf += bsize; + size -= bsize; + blockno++; + } while (bsize > 0); + + if (at76_is_505a(fwe->board_type)) { + at76_dbg(DBG_DEVSTART, "200 ms delay for 505a"); + schedule_timeout_interruptible(HZ / 5 + 1); + } + +exit: + kfree(block); + if (ret < 0) + dev_err(&udev->dev, + "downloading external firmware failed: %d\n", ret); + return ret; +} + +/* Download internal firmware */ +static int at76_load_internal_fw(struct usb_device *udev, struct fwentry *fwe) +{ + int ret; + int need_remap = !at76_is_505a(fwe->board_type); + + ret = at76_usbdfu_download(udev, fwe->intfw, fwe->intfw_size, + need_remap ? 0 : 2 * HZ); + + if (ret < 0) { + dev_err(&udev->dev, + "downloading internal fw failed with %d\n", ret); + goto exit; + } + + at76_dbg(DBG_DEVSTART, "sending REMAP"); + + /* no REMAP for 505A (see SF driver) */ + if (need_remap) { + ret = at76_remap(udev); + if (ret < 0) { + dev_err(&udev->dev, + "sending REMAP failed with %d\n", ret); + goto exit; + } + } + + at76_dbg(DBG_DEVSTART, "sleeping for 2 seconds"); + schedule_timeout_interruptible(2 * HZ + 1); + usb_reset_device(udev); + +exit: + return ret; +} + +static int at76_startup_device(struct at76_priv *priv) +{ + struct at76_card_config *ccfg = &priv->card_config; + int ret; + + at76_dbg(DBG_PARAMS, + "%s param: ssid %.*s (%*phD) mode %s ch %d wep %s key %d " + "keylen %d", wiphy_name(priv->hw->wiphy), priv->essid_size, + priv->essid, IW_ESSID_MAX_SIZE, priv->essid, + priv->iw_mode == IW_MODE_ADHOC ? "adhoc" : "infra", + priv->channel, priv->wep_enabled ? "enabled" : "disabled", + priv->wep_key_id, priv->wep_keys_len[priv->wep_key_id]); + at76_dbg(DBG_PARAMS, + "%s param: preamble %s rts %d retry %d frag %d " + "txrate %s auth_mode %d", wiphy_name(priv->hw->wiphy), + preambles[priv->preamble_type], priv->rts_threshold, + priv->short_retry_limit, priv->frag_threshold, + priv->txrate == TX_RATE_1MBIT ? "1MBit" : priv->txrate == + TX_RATE_2MBIT ? "2MBit" : priv->txrate == + TX_RATE_5_5MBIT ? "5.5MBit" : priv->txrate == + TX_RATE_11MBIT ? "11MBit" : priv->txrate == + TX_RATE_AUTO ? "auto" : "<invalid>", priv->auth_mode); + at76_dbg(DBG_PARAMS, + "%s param: pm_mode %d pm_period %d auth_mode %s " + "scan_times %d %d scan_mode %s", + wiphy_name(priv->hw->wiphy), priv->pm_mode, priv->pm_period, + priv->auth_mode == WLAN_AUTH_OPEN ? "open" : "shared_secret", + priv->scan_min_time, priv->scan_max_time, + priv->scan_mode == SCAN_TYPE_ACTIVE ? "active" : "passive"); + + memset(ccfg, 0, sizeof(struct at76_card_config)); + ccfg->promiscuous_mode = 0; + ccfg->short_retry_limit = priv->short_retry_limit; + + if (priv->wep_enabled) { + if (priv->wep_keys_len[priv->wep_key_id] > WEP_SMALL_KEY_LEN) + ccfg->encryption_type = 2; + else + ccfg->encryption_type = 1; + + /* jal: always exclude unencrypted if WEP is active */ + ccfg->exclude_unencrypted = 1; + } else { + ccfg->exclude_unencrypted = 0; + ccfg->encryption_type = 0; + } + + ccfg->rts_threshold = cpu_to_le16(priv->rts_threshold); + ccfg->fragmentation_threshold = cpu_to_le16(priv->frag_threshold); + + memcpy(ccfg->basic_rate_set, hw_rates, 4); + /* jal: really needed, we do a set_mib for autorate later ??? */ + ccfg->auto_rate_fallback = (priv->txrate == TX_RATE_AUTO ? 1 : 0); + ccfg->channel = priv->channel; + ccfg->privacy_invoked = priv->wep_enabled; + memcpy(ccfg->current_ssid, priv->essid, IW_ESSID_MAX_SIZE); + ccfg->ssid_len = priv->essid_size; + + ccfg->wep_default_key_id = priv->wep_key_id; + memcpy(ccfg->wep_default_key_value, priv->wep_keys, + sizeof(priv->wep_keys)); + + ccfg->short_preamble = priv->preamble_type; + ccfg->beacon_period = cpu_to_le16(priv->beacon_period); + + ret = at76_set_card_command(priv->udev, CMD_STARTUP, &priv->card_config, + sizeof(struct at76_card_config)); + if (ret < 0) { + wiphy_err(priv->hw->wiphy, "at76_set_card_command failed: %d\n", + ret); + return ret; + } + + at76_wait_completion(priv, CMD_STARTUP); + + /* remove BSSID from previous run */ + eth_zero_addr(priv->bssid); + + priv->scanning = false; + + if (at76_set_radio(priv, 1) == 1) + at76_wait_completion(priv, CMD_RADIO_ON); + + ret = at76_set_preamble(priv, priv->preamble_type); + if (ret < 0) + return ret; + + ret = at76_set_frag(priv, priv->frag_threshold); + if (ret < 0) + return ret; + + ret = at76_set_rts(priv, priv->rts_threshold); + if (ret < 0) + return ret; + + ret = at76_set_autorate_fallback(priv, + priv->txrate == TX_RATE_AUTO ? 1 : 0); + if (ret < 0) + return ret; + + ret = at76_set_pm_mode(priv); + if (ret < 0) + return ret; + + if (at76_debug & DBG_MIB) { + at76_dump_mib_mac(priv); + at76_dump_mib_mac_addr(priv); + at76_dump_mib_mac_mgmt(priv); + at76_dump_mib_mac_wep(priv); + at76_dump_mib_mdomain(priv); + at76_dump_mib_phy(priv); + at76_dump_mib_local(priv); + } + + return 0; +} + +/* Enable or disable promiscuous mode */ +static void at76_work_set_promisc(struct work_struct *work) +{ + struct at76_priv *priv = container_of(work, struct at76_priv, + work_set_promisc); + int ret = 0; + + if (priv->device_unplugged) + return; + + mutex_lock(&priv->mtx); + + priv->mib_buf.type = MIB_LOCAL; + priv->mib_buf.size = 1; + priv->mib_buf.index = offsetof(struct mib_local, promiscuous_mode); + priv->mib_buf.data.byte = priv->promisc ? 1 : 0; + + ret = at76_set_mib(priv, &priv->mib_buf); + if (ret < 0) + wiphy_err(priv->hw->wiphy, + "set_mib (promiscuous_mode) failed: %d\n", ret); + + mutex_unlock(&priv->mtx); +} + +/* Submit Rx urb back to the device */ +static void at76_work_submit_rx(struct work_struct *work) +{ + struct at76_priv *priv = container_of(work, struct at76_priv, + work_submit_rx); + + mutex_lock(&priv->mtx); + at76_submit_rx_urb(priv); + mutex_unlock(&priv->mtx); +} + +/* This is a workaround to make scan working: + * currently mac80211 does not process frames with no frequency + * information. + * However during scan the HW performs a sweep by itself, and we + * are unable to know where the radio is actually tuned. + * This function tries to do its best to guess this information.. + * During scan, If the current frame is a beacon or a probe response, + * the channel information is extracted from it. + * When not scanning, for other frames, or if it happens that for + * whatever reason we fail to parse beacons and probe responses, this + * function returns the priv->channel information, that should be correct + * at least when we are not scanning. + */ +static inline int at76_guess_freq(struct at76_priv *priv) +{ + size_t el_off; + const u8 *el; + int channel = priv->channel; + int len = priv->rx_skb->len; + struct ieee80211_hdr *hdr = (void *)priv->rx_skb->data; + + if (!priv->scanning) + goto exit; + + if (len < 24) + goto exit; + + if (ieee80211_is_probe_resp(hdr->frame_control)) { + el_off = offsetof(struct ieee80211_mgmt, u.probe_resp.variable); + el = ((struct ieee80211_mgmt *)hdr)->u.probe_resp.variable; + } else if (ieee80211_is_beacon(hdr->frame_control)) { + el_off = offsetof(struct ieee80211_mgmt, u.beacon.variable); + el = ((struct ieee80211_mgmt *)hdr)->u.beacon.variable; + } else { + goto exit; + } + len -= el_off; + + el = cfg80211_find_ie(WLAN_EID_DS_PARAMS, el, len); + if (el && el[1] > 0) + channel = el[2]; + +exit: + return ieee80211_channel_to_frequency(channel, IEEE80211_BAND_2GHZ); +} + +static void at76_rx_tasklet(unsigned long param) +{ + struct urb *urb = (struct urb *)param; + struct at76_priv *priv = urb->context; + struct at76_rx_buffer *buf; + struct ieee80211_rx_status rx_status = { 0 }; + + if (priv->device_unplugged) { + at76_dbg(DBG_DEVSTART, "device unplugged"); + at76_dbg(DBG_DEVSTART, "urb status %d", urb->status); + return; + } + + if (!priv->rx_skb || !priv->rx_skb->data) + return; + + buf = (struct at76_rx_buffer *)priv->rx_skb->data; + + if (urb->status != 0) { + if (urb->status != -ENOENT && urb->status != -ECONNRESET) + at76_dbg(DBG_URB, + "%s %s: - nonzero Rx bulk status received: %d", + __func__, wiphy_name(priv->hw->wiphy), + urb->status); + return; + } + + at76_dbg(DBG_RX_ATMEL_HDR, + "%s: rx frame: rate %d rssi %d noise %d link %d", + wiphy_name(priv->hw->wiphy), buf->rx_rate, buf->rssi, + buf->noise_level, buf->link_quality); + + skb_pull(priv->rx_skb, AT76_RX_HDRLEN); + skb_trim(priv->rx_skb, le16_to_cpu(buf->wlength)); + at76_dbg_dump(DBG_RX_DATA, priv->rx_skb->data, + priv->rx_skb->len, "RX: len=%d", priv->rx_skb->len); + + rx_status.signal = buf->rssi; + rx_status.flag |= RX_FLAG_DECRYPTED; + rx_status.flag |= RX_FLAG_IV_STRIPPED; + rx_status.band = IEEE80211_BAND_2GHZ; + rx_status.freq = at76_guess_freq(priv); + + at76_dbg(DBG_MAC80211, "calling ieee80211_rx_irqsafe(): %d/%d", + priv->rx_skb->len, priv->rx_skb->data_len); + memcpy(IEEE80211_SKB_RXCB(priv->rx_skb), &rx_status, sizeof(rx_status)); + ieee80211_rx_irqsafe(priv->hw, priv->rx_skb); + + /* Use a new skb for the next receive */ + priv->rx_skb = NULL; + + at76_submit_rx_urb(priv); +} + +/* Load firmware into kernel memory and parse it */ +static struct fwentry *at76_load_firmware(struct usb_device *udev, + enum board_type board_type) +{ + int ret; + char *str; + struct at76_fw_header *fwh; + struct fwentry *fwe = &firmwares[board_type]; + + mutex_lock(&fw_mutex); + + if (fwe->loaded) { + at76_dbg(DBG_FW, "re-using previously loaded fw"); + goto exit; + } + + at76_dbg(DBG_FW, "downloading firmware %s", fwe->fwname); + ret = request_firmware(&fwe->fw, fwe->fwname, &udev->dev); + if (ret < 0) { + dev_err(&udev->dev, "firmware %s not found!\n", + fwe->fwname); + dev_err(&udev->dev, + "you may need to download the firmware from http://developer.berlios.de/projects/at76c503a/\n"); + goto exit; + } + + at76_dbg(DBG_FW, "got it."); + fwh = (struct at76_fw_header *)(fwe->fw->data); + + if (fwe->fw->size <= sizeof(*fwh)) { + dev_err(&udev->dev, + "firmware is too short (0x%zx)\n", fwe->fw->size); + goto exit; + } + + /* CRC currently not checked */ + fwe->board_type = le32_to_cpu(fwh->board_type); + if (fwe->board_type != board_type) { + dev_err(&udev->dev, + "board type mismatch, requested %u, got %u\n", + board_type, fwe->board_type); + goto exit; + } + + fwe->fw_version.major = fwh->major; + fwe->fw_version.minor = fwh->minor; + fwe->fw_version.patch = fwh->patch; + fwe->fw_version.build = fwh->build; + + str = (char *)fwh + le32_to_cpu(fwh->str_offset); + fwe->intfw = (u8 *)fwh + le32_to_cpu(fwh->int_fw_offset); + fwe->intfw_size = le32_to_cpu(fwh->int_fw_len); + fwe->extfw = (u8 *)fwh + le32_to_cpu(fwh->ext_fw_offset); + fwe->extfw_size = le32_to_cpu(fwh->ext_fw_len); + + fwe->loaded = 1; + + dev_printk(KERN_DEBUG, &udev->dev, + "using firmware %s (version %d.%d.%d-%d)\n", + fwe->fwname, fwh->major, fwh->minor, fwh->patch, fwh->build); + + at76_dbg(DBG_DEVSTART, "board %u, int %d:%d, ext %d:%d", board_type, + le32_to_cpu(fwh->int_fw_offset), le32_to_cpu(fwh->int_fw_len), + le32_to_cpu(fwh->ext_fw_offset), le32_to_cpu(fwh->ext_fw_len)); + at76_dbg(DBG_DEVSTART, "firmware id %s", str); + +exit: + mutex_unlock(&fw_mutex); + + if (fwe->loaded) + return fwe; + else + return NULL; +} + +static int at76_join(struct at76_priv *priv) +{ + struct at76_req_join join; + int ret; + + memset(&join, 0, sizeof(struct at76_req_join)); + memcpy(join.essid, priv->essid, priv->essid_size); + join.essid_size = priv->essid_size; + memcpy(join.bssid, priv->bssid, ETH_ALEN); + join.bss_type = INFRASTRUCTURE_MODE; + join.channel = priv->channel; + join.timeout = cpu_to_le16(2000); + + at76_dbg(DBG_MAC80211, "%s: sending CMD_JOIN", __func__); + ret = at76_set_card_command(priv->udev, CMD_JOIN, &join, + sizeof(struct at76_req_join)); + + if (ret < 0) { + wiphy_err(priv->hw->wiphy, "at76_set_card_command failed: %d\n", + ret); + return 0; + } + + ret = at76_wait_completion(priv, CMD_JOIN); + at76_dbg(DBG_MAC80211, "%s: CMD_JOIN returned: 0x%02x", __func__, ret); + if (ret != CMD_STATUS_COMPLETE) { + wiphy_err(priv->hw->wiphy, "at76_wait_completion failed: %d\n", + ret); + return 0; + } + + at76_set_pm_mode(priv); + + return 0; +} + +static void at76_work_join_bssid(struct work_struct *work) +{ + struct at76_priv *priv = container_of(work, struct at76_priv, + work_join_bssid); + + if (priv->device_unplugged) + return; + + mutex_lock(&priv->mtx); + + if (is_valid_ether_addr(priv->bssid)) + at76_join(priv); + + mutex_unlock(&priv->mtx); +} + +static void at76_mac80211_tx_callback(struct urb *urb) +{ + struct at76_priv *priv = urb->context; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(priv->tx_skb); + + at76_dbg(DBG_MAC80211, "%s()", __func__); + + switch (urb->status) { + case 0: + /* success */ + info->flags |= IEEE80211_TX_STAT_ACK; + break; + case -ENOENT: + case -ECONNRESET: + /* fail, urb has been unlinked */ + /* FIXME: add error message */ + break; + default: + at76_dbg(DBG_URB, "%s - nonzero tx status received: %d", + __func__, urb->status); + break; + } + + memset(&info->status, 0, sizeof(info->status)); + + ieee80211_tx_status_irqsafe(priv->hw, priv->tx_skb); + + priv->tx_skb = NULL; + + ieee80211_wake_queues(priv->hw); +} + +static void at76_mac80211_tx(struct ieee80211_hw *hw, + struct ieee80211_tx_control *control, + struct sk_buff *skb) +{ + struct at76_priv *priv = hw->priv; + struct at76_tx_buffer *tx_buffer = priv->bulk_out_buffer; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)skb->data; + int padding, submit_len, ret; + + at76_dbg(DBG_MAC80211, "%s()", __func__); + + if (priv->tx_urb->status == -EINPROGRESS) { + wiphy_err(priv->hw->wiphy, + "%s called while tx urb is pending\n", __func__); + dev_kfree_skb_any(skb); + return; + } + + /* The following code lines are important when the device is going to + * authenticate with a new bssid. The driver must send CMD_JOIN before + * an authentication frame is transmitted. For this to succeed, the + * correct bssid of the AP must be known. As mac80211 does not inform + * drivers about the bssid prior to the authentication process the + * following workaround is necessary. If the TX frame is an + * authentication frame extract the bssid and send the CMD_JOIN. */ + if (mgmt->frame_control & cpu_to_le16(IEEE80211_STYPE_AUTH)) { + if (!ether_addr_equal_64bits(priv->bssid, mgmt->bssid)) { + memcpy(priv->bssid, mgmt->bssid, ETH_ALEN); + ieee80211_queue_work(hw, &priv->work_join_bssid); + dev_kfree_skb_any(skb); + return; + } + } + + ieee80211_stop_queues(hw); + + at76_ledtrig_tx_activity(); /* tell ledtrigger we send a packet */ + + WARN_ON(priv->tx_skb != NULL); + + priv->tx_skb = skb; + padding = at76_calc_padding(skb->len); + submit_len = AT76_TX_HDRLEN + skb->len + padding; + + /* setup 'Atmel' header */ + memset(tx_buffer, 0, sizeof(*tx_buffer)); + tx_buffer->padding = padding; + tx_buffer->wlength = cpu_to_le16(skb->len); + tx_buffer->tx_rate = ieee80211_get_tx_rate(hw, info)->hw_value; + memset(tx_buffer->reserved, 0, sizeof(tx_buffer->reserved)); + memcpy(tx_buffer->packet, skb->data, skb->len); + + at76_dbg(DBG_TX_DATA, "%s tx: wlen 0x%x pad 0x%x rate %d hdr", + wiphy_name(priv->hw->wiphy), le16_to_cpu(tx_buffer->wlength), + tx_buffer->padding, tx_buffer->tx_rate); + + /* send stuff */ + at76_dbg_dump(DBG_TX_DATA_CONTENT, tx_buffer, submit_len, + "%s(): tx_buffer %d bytes:", __func__, submit_len); + usb_fill_bulk_urb(priv->tx_urb, priv->udev, priv->tx_pipe, tx_buffer, + submit_len, at76_mac80211_tx_callback, priv); + ret = usb_submit_urb(priv->tx_urb, GFP_ATOMIC); + if (ret) { + wiphy_err(priv->hw->wiphy, "error in tx submit urb: %d\n", ret); + if (ret == -EINVAL) + wiphy_err(priv->hw->wiphy, + "-EINVAL: tx urb %p hcpriv %p complete %p\n", + priv->tx_urb, + priv->tx_urb->hcpriv, priv->tx_urb->complete); + } +} + +static int at76_mac80211_start(struct ieee80211_hw *hw) +{ + struct at76_priv *priv = hw->priv; + int ret; + + at76_dbg(DBG_MAC80211, "%s()", __func__); + + mutex_lock(&priv->mtx); + + ret = at76_submit_rx_urb(priv); + if (ret < 0) { + wiphy_err(priv->hw->wiphy, "open: submit_rx_urb failed: %d\n", + ret); + goto error; + } + + at76_startup_device(priv); + + at76_start_monitor(priv); + +error: + mutex_unlock(&priv->mtx); + + return 0; +} + +static void at76_mac80211_stop(struct ieee80211_hw *hw) +{ + struct at76_priv *priv = hw->priv; + + at76_dbg(DBG_MAC80211, "%s()", __func__); + + cancel_delayed_work(&priv->dwork_hw_scan); + cancel_work_sync(&priv->work_join_bssid); + cancel_work_sync(&priv->work_set_promisc); + + mutex_lock(&priv->mtx); + + if (!priv->device_unplugged) { + /* We are called by "ifconfig ethX down", not because the + * device is not available anymore. */ + at76_set_radio(priv, 0); + + /* We unlink rx_urb because at76_open() re-submits it. + * If unplugged, at76_delete_device() takes care of it. */ + usb_kill_urb(priv->rx_urb); + } + + mutex_unlock(&priv->mtx); +} + +static int at76_add_interface(struct ieee80211_hw *hw, + struct ieee80211_vif *vif) +{ + struct at76_priv *priv = hw->priv; + int ret = 0; + + at76_dbg(DBG_MAC80211, "%s()", __func__); + + mutex_lock(&priv->mtx); + + switch (vif->type) { + case NL80211_IFTYPE_STATION: + priv->iw_mode = IW_MODE_INFRA; + break; + default: + ret = -EOPNOTSUPP; + goto exit; + } + +exit: + mutex_unlock(&priv->mtx); + + return ret; +} + +static void at76_remove_interface(struct ieee80211_hw *hw, + struct ieee80211_vif *vif) +{ + at76_dbg(DBG_MAC80211, "%s()", __func__); +} + +static void at76_dwork_hw_scan(struct work_struct *work) +{ + struct at76_priv *priv = container_of(work, struct at76_priv, + dwork_hw_scan.work); + int ret; + + if (priv->device_unplugged) + return; + + mutex_lock(&priv->mtx); + + ret = at76_get_cmd_status(priv->udev, CMD_SCAN); + at76_dbg(DBG_MAC80211, "%s: CMD_SCAN status 0x%02x", __func__, ret); + + /* FIXME: add maximum time for scan to complete */ + + if (ret != CMD_STATUS_COMPLETE) { + ieee80211_queue_delayed_work(priv->hw, &priv->dwork_hw_scan, + SCAN_POLL_INTERVAL); + mutex_unlock(&priv->mtx); + return; + } + + if (is_valid_ether_addr(priv->bssid)) + at76_join(priv); + + priv->scanning = false; + + mutex_unlock(&priv->mtx); + + ieee80211_scan_completed(priv->hw, false); + + ieee80211_wake_queues(priv->hw); +} + +static int at76_hw_scan(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_scan_request *hw_req) +{ + struct cfg80211_scan_request *req = &hw_req->req; + struct at76_priv *priv = hw->priv; + struct at76_req_scan scan; + u8 *ssid = NULL; + int ret, len = 0; + + at76_dbg(DBG_MAC80211, "%s():", __func__); + + if (priv->device_unplugged) + return 0; + + mutex_lock(&priv->mtx); + + ieee80211_stop_queues(hw); + + memset(&scan, 0, sizeof(struct at76_req_scan)); + eth_broadcast_addr(scan.bssid); + + if (req->n_ssids) { + scan.scan_type = SCAN_TYPE_ACTIVE; + ssid = req->ssids[0].ssid; + len = req->ssids[0].ssid_len; + } else { + scan.scan_type = SCAN_TYPE_PASSIVE; + } + + if (len) { + memcpy(scan.essid, ssid, len); + scan.essid_size = len; + } + + scan.min_channel_time = cpu_to_le16(priv->scan_min_time); + scan.max_channel_time = cpu_to_le16(priv->scan_max_time); + scan.probe_delay = cpu_to_le16(priv->scan_min_time * 1000); + scan.international_scan = 0; + + at76_dbg(DBG_MAC80211, "%s: sending CMD_SCAN", __func__); + ret = at76_set_card_command(priv->udev, CMD_SCAN, &scan, sizeof(scan)); + + if (ret < 0) { + wiphy_err(priv->hw->wiphy, "CMD_SCAN failed: %d\n", ret); + goto exit; + } + + priv->scanning = true; + ieee80211_queue_delayed_work(priv->hw, &priv->dwork_hw_scan, + SCAN_POLL_INTERVAL); + +exit: + mutex_unlock(&priv->mtx); + + return 0; +} + +static int at76_config(struct ieee80211_hw *hw, u32 changed) +{ + struct at76_priv *priv = hw->priv; + + at76_dbg(DBG_MAC80211, "%s(): channel %d", + __func__, hw->conf.chandef.chan->hw_value); + at76_dbg_dump(DBG_MAC80211, priv->bssid, ETH_ALEN, "bssid:"); + + mutex_lock(&priv->mtx); + + priv->channel = hw->conf.chandef.chan->hw_value; + + if (is_valid_ether_addr(priv->bssid)) + at76_join(priv); + else + at76_start_monitor(priv); + + mutex_unlock(&priv->mtx); + + return 0; +} + +static void at76_bss_info_changed(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_bss_conf *conf, + u32 changed) +{ + struct at76_priv *priv = hw->priv; + + at76_dbg(DBG_MAC80211, "%s():", __func__); + + if (!(changed & BSS_CHANGED_BSSID)) + return; + + at76_dbg_dump(DBG_MAC80211, conf->bssid, ETH_ALEN, "bssid:"); + + mutex_lock(&priv->mtx); + + memcpy(priv->bssid, conf->bssid, ETH_ALEN); + + if (is_valid_ether_addr(priv->bssid)) + /* mac80211 is joining a bss */ + at76_join(priv); + + mutex_unlock(&priv->mtx); +} + +/* must be atomic */ +static void at76_configure_filter(struct ieee80211_hw *hw, + unsigned int changed_flags, + unsigned int *total_flags, u64 multicast) +{ + struct at76_priv *priv = hw->priv; + int flags; + + at76_dbg(DBG_MAC80211, "%s(): changed_flags=0x%08x " + "total_flags=0x%08x", + __func__, changed_flags, *total_flags); + + flags = changed_flags & AT76_SUPPORTED_FILTERS; + *total_flags = AT76_SUPPORTED_FILTERS; + + /* Bail out after updating flags to prevent a WARN_ON in mac80211. */ + if (priv->device_unplugged) + return; + + /* FIXME: access to priv->promisc should be protected with + * priv->mtx, but it's impossible because this function needs to be + * atomic */ + + if (flags && !priv->promisc) { + /* mac80211 wants us to enable promiscuous mode */ + priv->promisc = 1; + } else if (!flags && priv->promisc) { + /* we need to disable promiscuous mode */ + priv->promisc = 0; + } else + return; + + ieee80211_queue_work(hw, &priv->work_set_promisc); +} + +static int at76_set_wep(struct at76_priv *priv) +{ + int ret = 0; + struct mib_mac_wep *mib_data = &priv->mib_buf.data.wep_mib; + + priv->mib_buf.type = MIB_MAC_WEP; + priv->mib_buf.size = sizeof(struct mib_mac_wep); + priv->mib_buf.index = 0; + + memset(mib_data, 0, sizeof(*mib_data)); + + if (priv->wep_enabled) { + if (priv->wep_keys_len[priv->wep_key_id] > WEP_SMALL_KEY_LEN) + mib_data->encryption_level = 2; + else + mib_data->encryption_level = 1; + + /* always exclude unencrypted if WEP is active */ + mib_data->exclude_unencrypted = 1; + } else { + mib_data->exclude_unencrypted = 0; + mib_data->encryption_level = 0; + } + + mib_data->privacy_invoked = priv->wep_enabled; + mib_data->wep_default_key_id = priv->wep_key_id; + memcpy(mib_data->wep_default_keyvalue, priv->wep_keys, + sizeof(priv->wep_keys)); + + ret = at76_set_mib(priv, &priv->mib_buf); + + if (ret < 0) + wiphy_err(priv->hw->wiphy, + "set_mib (wep) failed: %d\n", ret); + + return ret; +} + +static int at76_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, + struct ieee80211_vif *vif, struct ieee80211_sta *sta, + struct ieee80211_key_conf *key) +{ + struct at76_priv *priv = hw->priv; + + int i; + + at76_dbg(DBG_MAC80211, "%s(): cmd %d key->cipher %d key->keyidx %d " + "key->keylen %d", + __func__, cmd, key->cipher, key->keyidx, key->keylen); + + if ((key->cipher != WLAN_CIPHER_SUITE_WEP40) && + (key->cipher != WLAN_CIPHER_SUITE_WEP104)) + return -EOPNOTSUPP; + + key->hw_key_idx = key->keyidx; + + mutex_lock(&priv->mtx); + + switch (cmd) { + case SET_KEY: + memcpy(priv->wep_keys[key->keyidx], key->key, key->keylen); + priv->wep_keys_len[key->keyidx] = key->keylen; + + /* FIXME: find out how to do this properly */ + priv->wep_key_id = key->keyidx; + + break; + case DISABLE_KEY: + default: + priv->wep_keys_len[key->keyidx] = 0; + break; + } + + priv->wep_enabled = 0; + + for (i = 0; i < WEP_KEYS; i++) { + if (priv->wep_keys_len[i] != 0) + priv->wep_enabled = 1; + } + + at76_set_wep(priv); + + mutex_unlock(&priv->mtx); + + return 0; +} + +static const struct ieee80211_ops at76_ops = { + .tx = at76_mac80211_tx, + .add_interface = at76_add_interface, + .remove_interface = at76_remove_interface, + .config = at76_config, + .bss_info_changed = at76_bss_info_changed, + .configure_filter = at76_configure_filter, + .start = at76_mac80211_start, + .stop = at76_mac80211_stop, + .hw_scan = at76_hw_scan, + .set_key = at76_set_key, +}; + +/* Allocate network device and initialize private data */ +static struct at76_priv *at76_alloc_new_device(struct usb_device *udev) +{ + struct ieee80211_hw *hw; + struct at76_priv *priv; + + hw = ieee80211_alloc_hw(sizeof(struct at76_priv), &at76_ops); + if (!hw) { + printk(KERN_ERR DRIVER_NAME ": could not register" + " ieee80211_hw\n"); + return NULL; + } + + priv = hw->priv; + priv->hw = hw; + + priv->udev = udev; + + mutex_init(&priv->mtx); + INIT_WORK(&priv->work_set_promisc, at76_work_set_promisc); + INIT_WORK(&priv->work_submit_rx, at76_work_submit_rx); + INIT_WORK(&priv->work_join_bssid, at76_work_join_bssid); + INIT_DELAYED_WORK(&priv->dwork_hw_scan, at76_dwork_hw_scan); + + tasklet_init(&priv->rx_tasklet, at76_rx_tasklet, 0); + + priv->pm_mode = AT76_PM_OFF; + priv->pm_period = 0; + + /* unit us */ + + return priv; +} + +static int at76_alloc_urbs(struct at76_priv *priv, + struct usb_interface *interface) +{ + struct usb_endpoint_descriptor *endpoint, *ep_in, *ep_out; + int i; + int buffer_size; + struct usb_host_interface *iface_desc; + + at76_dbg(DBG_PROC_ENTRY, "%s: ENTER", __func__); + + at76_dbg(DBG_URB, "%s: NumEndpoints %d ", __func__, + interface->altsetting[0].desc.bNumEndpoints); + + ep_in = NULL; + ep_out = NULL; + iface_desc = interface->cur_altsetting; + for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) { + endpoint = &iface_desc->endpoint[i].desc; + + at76_dbg(DBG_URB, "%s: %d. endpoint: addr 0x%x attr 0x%x", + __func__, i, endpoint->bEndpointAddress, + endpoint->bmAttributes); + + if (!ep_in && usb_endpoint_is_bulk_in(endpoint)) + ep_in = endpoint; + + if (!ep_out && usb_endpoint_is_bulk_out(endpoint)) + ep_out = endpoint; + } + + if (!ep_in || !ep_out) { + dev_err(&interface->dev, "bulk endpoints missing\n"); + return -ENXIO; + } + + priv->rx_pipe = usb_rcvbulkpipe(priv->udev, ep_in->bEndpointAddress); + priv->tx_pipe = usb_sndbulkpipe(priv->udev, ep_out->bEndpointAddress); + + priv->rx_urb = usb_alloc_urb(0, GFP_KERNEL); + priv->tx_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!priv->rx_urb || !priv->tx_urb) { + dev_err(&interface->dev, "cannot allocate URB\n"); + return -ENOMEM; + } + + buffer_size = sizeof(struct at76_tx_buffer) + MAX_PADDING_SIZE; + priv->bulk_out_buffer = kmalloc(buffer_size, GFP_KERNEL); + if (!priv->bulk_out_buffer) + return -ENOMEM; + + at76_dbg(DBG_PROC_ENTRY, "%s: EXIT", __func__); + + return 0; +} + +static struct ieee80211_rate at76_rates[] = { + { .bitrate = 10, .hw_value = TX_RATE_1MBIT, }, + { .bitrate = 20, .hw_value = TX_RATE_2MBIT, }, + { .bitrate = 55, .hw_value = TX_RATE_5_5MBIT, }, + { .bitrate = 110, .hw_value = TX_RATE_11MBIT, }, +}; + +static struct ieee80211_channel at76_channels[] = { + { .center_freq = 2412, .hw_value = 1 }, + { .center_freq = 2417, .hw_value = 2 }, + { .center_freq = 2422, .hw_value = 3 }, + { .center_freq = 2427, .hw_value = 4 }, + { .center_freq = 2432, .hw_value = 5 }, + { .center_freq = 2437, .hw_value = 6 }, + { .center_freq = 2442, .hw_value = 7 }, + { .center_freq = 2447, .hw_value = 8 }, + { .center_freq = 2452, .hw_value = 9 }, + { .center_freq = 2457, .hw_value = 10 }, + { .center_freq = 2462, .hw_value = 11 }, + { .center_freq = 2467, .hw_value = 12 }, + { .center_freq = 2472, .hw_value = 13 }, + { .center_freq = 2484, .hw_value = 14 } +}; + +static struct ieee80211_supported_band at76_supported_band = { + .channels = at76_channels, + .n_channels = ARRAY_SIZE(at76_channels), + .bitrates = at76_rates, + .n_bitrates = ARRAY_SIZE(at76_rates), +}; + +/* Register network device and initialize the hardware */ +static int at76_init_new_device(struct at76_priv *priv, + struct usb_interface *interface) +{ + struct wiphy *wiphy; + size_t len; + int ret; + + /* set up the endpoint information */ + /* check out the endpoints */ + + at76_dbg(DBG_DEVSTART, "USB interface: %d endpoints", + interface->cur_altsetting->desc.bNumEndpoints); + + ret = at76_alloc_urbs(priv, interface); + if (ret < 0) + goto exit; + + /* MAC address */ + ret = at76_get_hw_config(priv); + if (ret < 0) { + dev_err(&interface->dev, "cannot get MAC address\n"); + goto exit; + } + + priv->domain = at76_get_reg_domain(priv->regulatory_domain); + + priv->channel = DEF_CHANNEL; + priv->iw_mode = IW_MODE_INFRA; + priv->rts_threshold = DEF_RTS_THRESHOLD; + priv->frag_threshold = DEF_FRAG_THRESHOLD; + priv->short_retry_limit = DEF_SHORT_RETRY_LIMIT; + priv->txrate = TX_RATE_AUTO; + priv->preamble_type = PREAMBLE_TYPE_LONG; + priv->beacon_period = 100; + priv->auth_mode = WLAN_AUTH_OPEN; + priv->scan_min_time = DEF_SCAN_MIN_TIME; + priv->scan_max_time = DEF_SCAN_MAX_TIME; + priv->scan_mode = SCAN_TYPE_ACTIVE; + priv->device_unplugged = 0; + + /* mac80211 initialisation */ + wiphy = priv->hw->wiphy; + priv->hw->wiphy->max_scan_ssids = 1; + priv->hw->wiphy->max_scan_ie_len = 0; + priv->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION); + priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &at76_supported_band; + priv->hw->flags = IEEE80211_HW_RX_INCLUDES_FCS | + IEEE80211_HW_SIGNAL_UNSPEC; + priv->hw->max_signal = 100; + + SET_IEEE80211_DEV(priv->hw, &interface->dev); + SET_IEEE80211_PERM_ADDR(priv->hw, priv->mac_addr); + + len = sizeof(wiphy->fw_version); + snprintf(wiphy->fw_version, len, "%d.%d.%d-%d", + priv->fw_version.major, priv->fw_version.minor, + priv->fw_version.patch, priv->fw_version.build); + + wiphy->hw_version = priv->board_type; + + ret = ieee80211_register_hw(priv->hw); + if (ret) { + printk(KERN_ERR "cannot register mac80211 hw (status %d)!\n", + ret); + goto exit; + } + + priv->mac80211_registered = 1; + + wiphy_info(priv->hw->wiphy, "USB %s, MAC %pM, firmware %d.%d.%d-%d\n", + dev_name(&interface->dev), priv->mac_addr, + priv->fw_version.major, priv->fw_version.minor, + priv->fw_version.patch, priv->fw_version.build); + wiphy_info(priv->hw->wiphy, "regulatory domain 0x%02x: %s\n", + priv->regulatory_domain, priv->domain->name); + +exit: + return ret; +} + +static void at76_delete_device(struct at76_priv *priv) +{ + at76_dbg(DBG_PROC_ENTRY, "%s: ENTER", __func__); + + /* The device is gone, don't bother turning it off */ + priv->device_unplugged = 1; + + tasklet_kill(&priv->rx_tasklet); + + if (priv->mac80211_registered) + ieee80211_unregister_hw(priv->hw); + + if (priv->tx_urb) { + usb_kill_urb(priv->tx_urb); + usb_free_urb(priv->tx_urb); + } + if (priv->rx_urb) { + usb_kill_urb(priv->rx_urb); + usb_free_urb(priv->rx_urb); + } + + at76_dbg(DBG_PROC_ENTRY, "%s: unlinked urbs", __func__); + + kfree(priv->bulk_out_buffer); + + del_timer_sync(&ledtrig_tx_timer); + + kfree_skb(priv->rx_skb); + + at76_dbg(DBG_PROC_ENTRY, "%s: before freeing priv/ieee80211_hw", + __func__); + ieee80211_free_hw(priv->hw); + + at76_dbg(DBG_PROC_ENTRY, "%s: EXIT", __func__); +} + +static int at76_probe(struct usb_interface *interface, + const struct usb_device_id *id) +{ + int ret; + struct at76_priv *priv; + struct fwentry *fwe; + struct usb_device *udev; + int op_mode; + int need_ext_fw = 0; + struct mib_fw_version *fwv = NULL; + int board_type = (int)id->driver_info; + + udev = usb_get_dev(interface_to_usbdev(interface)); + + fwv = kmalloc(sizeof(*fwv), GFP_KERNEL); + if (!fwv) { + ret = -ENOMEM; + goto exit; + } + + /* Load firmware into kernel memory */ + fwe = at76_load_firmware(udev, board_type); + if (!fwe) { + ret = -ENOENT; + goto exit; + } + + op_mode = at76_get_op_mode(udev); + + at76_dbg(DBG_DEVSTART, "opmode %d", op_mode); + + /* we get OPMODE_NONE with 2.4.23, SMC2662W-AR ??? + we get 204 with 2.4.23, Fiberline FL-WL240u (505A+RFMD2958) ??? */ + + if (op_mode == OPMODE_HW_CONFIG_MODE) { + dev_err(&interface->dev, + "cannot handle a device in HW_CONFIG_MODE\n"); + ret = -EBUSY; + goto exit; + } + + if (op_mode != OPMODE_NORMAL_NIC_WITH_FLASH + && op_mode != OPMODE_NORMAL_NIC_WITHOUT_FLASH) { + /* download internal firmware part */ + dev_printk(KERN_DEBUG, &interface->dev, + "downloading internal firmware\n"); + ret = at76_load_internal_fw(udev, fwe); + if (ret < 0) { + dev_err(&interface->dev, + "error %d downloading internal firmware\n", + ret); + goto exit; + } + usb_put_dev(udev); + goto exit; + } + + /* Internal firmware already inside the device. Get firmware + * version to test if external firmware is loaded. + * This works only for newer firmware, e.g. the Intersil 0.90.x + * says "control timeout on ep0in" and subsequent + * at76_get_op_mode() fail too :-( */ + + /* if version >= 0.100.x.y or device with built-in flash we can + * query the device for the fw version */ + if ((fwe->fw_version.major > 0 || fwe->fw_version.minor >= 100) + || (op_mode == OPMODE_NORMAL_NIC_WITH_FLASH)) { + ret = at76_get_mib(udev, MIB_FW_VERSION, fwv, sizeof(*fwv)); + if (ret < 0 || (fwv->major | fwv->minor) == 0) + need_ext_fw = 1; + } else + /* No way to check firmware version, reload to be sure */ + need_ext_fw = 1; + + if (need_ext_fw) { + dev_printk(KERN_DEBUG, &interface->dev, + "downloading external firmware\n"); + + ret = at76_load_external_fw(udev, fwe); + if (ret < 0) + goto exit; + + /* Re-check firmware version */ + ret = at76_get_mib(udev, MIB_FW_VERSION, fwv, sizeof(*fwv)); + if (ret < 0) { + dev_err(&interface->dev, + "error %d getting firmware version\n", ret); + goto exit; + } + } + + priv = at76_alloc_new_device(udev); + if (!priv) { + ret = -ENOMEM; + goto exit; + } + + usb_set_intfdata(interface, priv); + + memcpy(&priv->fw_version, fwv, sizeof(struct mib_fw_version)); + priv->board_type = board_type; + + ret = at76_init_new_device(priv, interface); + if (ret < 0) + at76_delete_device(priv); + +exit: + kfree(fwv); + if (ret < 0) + usb_put_dev(udev); + return ret; +} + +static void at76_disconnect(struct usb_interface *interface) +{ + struct at76_priv *priv; + + priv = usb_get_intfdata(interface); + usb_set_intfdata(interface, NULL); + + /* Disconnect after loading internal firmware */ + if (!priv) + return; + + wiphy_info(priv->hw->wiphy, "disconnecting\n"); + at76_delete_device(priv); + usb_put_dev(priv->udev); + dev_info(&interface->dev, "disconnected\n"); +} + +/* Structure for registering this driver with the USB subsystem */ +static struct usb_driver at76_driver = { + .name = DRIVER_NAME, + .probe = at76_probe, + .disconnect = at76_disconnect, + .id_table = dev_table, + .disable_hub_initiated_lpm = 1, +}; + +static int __init at76_mod_init(void) +{ + int result; + + printk(KERN_INFO DRIVER_DESC " " DRIVER_VERSION " loading\n"); + + mutex_init(&fw_mutex); + + /* register this driver with the USB subsystem */ + result = usb_register(&at76_driver); + if (result < 0) + printk(KERN_ERR DRIVER_NAME + ": usb_register failed (status %d)\n", result); + + led_trigger_register_simple("at76_usb-tx", &ledtrig_tx); + return result; +} + +static void __exit at76_mod_exit(void) +{ + int i; + + printk(KERN_INFO DRIVER_DESC " " DRIVER_VERSION " unloading\n"); + usb_deregister(&at76_driver); + for (i = 0; i < ARRAY_SIZE(firmwares); i++) + release_firmware(firmwares[i].fw); + led_trigger_unregister_simple(ledtrig_tx); +} + +module_param_named(debug, at76_debug, uint, 0600); +MODULE_PARM_DESC(debug, "Debugging level"); + +module_init(at76_mod_init); +module_exit(at76_mod_exit); + +MODULE_AUTHOR("Oliver Kurth <oku@masqmail.cx>"); +MODULE_AUTHOR("Joerg Albert <joerg.albert@gmx.de>"); +MODULE_AUTHOR("Alex <alex@foogod.com>"); +MODULE_AUTHOR("Nick Jones"); +MODULE_AUTHOR("Balint Seeber <n0_5p4m_p13453@hotmail.com>"); +MODULE_AUTHOR("Pavel Roskin <proski@gnu.org>"); +MODULE_AUTHOR("Guido Guenther <agx@sigxcpu.org>"); +MODULE_AUTHOR("Kalle Valo <kalle.valo@iki.fi>"); +MODULE_AUTHOR("Sebastian Smolorz <sesmo@gmx.net>"); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); |