diff options
Diffstat (limited to 'kernel/drivers/net/wan/wanxl.h')
| -rw-r--r-- | kernel/drivers/net/wan/wanxl.h | 152 |
1 files changed, 152 insertions, 0 deletions
diff --git a/kernel/drivers/net/wan/wanxl.h b/kernel/drivers/net/wan/wanxl.h new file mode 100644 index 000000000..3f86558f8 --- /dev/null +++ b/kernel/drivers/net/wan/wanxl.h @@ -0,0 +1,152 @@ +/* + * wanXL serial card driver for Linux + * definitions common to host driver and card firmware + * + * Copyright (C) 2003 Krzysztof Halasa <khc@pm.waw.pl> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License + * as published by the Free Software Foundation. + */ + +#define RESET_WHILE_LOADING 0 + +/* you must rebuild the firmware if any of the following is changed */ +#define DETECT_RAM 0 /* needed for > 4MB RAM, 16 MB maximum */ +#define QUICC_MEMCPY_USES_PLX 1 /* must be used if the host has > 256 MB RAM */ + + +#define STATUS_CABLE_V35 2 +#define STATUS_CABLE_X21 3 +#define STATUS_CABLE_V24 4 +#define STATUS_CABLE_EIA530 5 +#define STATUS_CABLE_INVALID 6 +#define STATUS_CABLE_NONE 7 + +#define STATUS_CABLE_DCE 0x8000 +#define STATUS_CABLE_DSR 0x0010 +#define STATUS_CABLE_DCD 0x0008 +#define STATUS_CABLE_PM_SHIFT 5 + +#define PDM_OFFSET 0x1000 + +#define TX_BUFFERS 10 /* per port */ +#define RX_BUFFERS 30 +#define RX_QUEUE_LENGTH 40 /* card->host queue length - per card */ + +#define PACKET_EMPTY 0x00 +#define PACKET_FULL 0x10 +#define PACKET_SENT 0x20 /* TX only */ +#define PACKET_UNDERRUN 0x30 /* TX only */ +#define PACKET_PORT_MASK 0x03 /* RX only */ + +/* bit numbers in PLX9060 doorbell registers */ +#define DOORBELL_FROM_CARD_TX_0 0 /* packet sent by the card */ +#define DOORBELL_FROM_CARD_TX_1 1 +#define DOORBELL_FROM_CARD_TX_2 2 +#define DOORBELL_FROM_CARD_TX_3 3 +#define DOORBELL_FROM_CARD_RX 4 +#define DOORBELL_FROM_CARD_CABLE_0 5 /* cable/PM/etc. changed */ +#define DOORBELL_FROM_CARD_CABLE_1 6 +#define DOORBELL_FROM_CARD_CABLE_2 7 +#define DOORBELL_FROM_CARD_CABLE_3 8 + +#define DOORBELL_TO_CARD_OPEN_0 0 +#define DOORBELL_TO_CARD_OPEN_1 1 +#define DOORBELL_TO_CARD_OPEN_2 2 +#define DOORBELL_TO_CARD_OPEN_3 3 +#define DOORBELL_TO_CARD_CLOSE_0 4 +#define DOORBELL_TO_CARD_CLOSE_1 5 +#define DOORBELL_TO_CARD_CLOSE_2 6 +#define DOORBELL_TO_CARD_CLOSE_3 7 +#define DOORBELL_TO_CARD_TX_0 8 /* outbound packet queued */ +#define DOORBELL_TO_CARD_TX_1 9 +#define DOORBELL_TO_CARD_TX_2 10 +#define DOORBELL_TO_CARD_TX_3 11 + +/* firmware-only status bits, starting from last DOORBELL_TO_CARD + 1 */ +#define TASK_SCC_0 12 +#define TASK_SCC_1 13 +#define TASK_SCC_2 14 +#define TASK_SCC_3 15 + +#define ALIGN32(x) (((x) + 3) & 0xFFFFFFFC) +#define BUFFER_LENGTH ALIGN32(HDLC_MAX_MRU + 4) /* 4 bytes for 32-bit CRC */ + +/* Address of TX and RX buffers in 68360 address space */ +#define BUFFERS_ADDR 0x4000 /* 16 KB */ + +#ifndef __ASSEMBLER__ +#define PLX_OFFSET 0 +#else +#define PLX_OFFSET PLX + 0x80 +#endif + +#define PLX_MAILBOX_0 (PLX_OFFSET + 0x40) +#define PLX_MAILBOX_1 (PLX_OFFSET + 0x44) +#define PLX_MAILBOX_2 (PLX_OFFSET + 0x48) +#define PLX_MAILBOX_3 (PLX_OFFSET + 0x4C) +#define PLX_MAILBOX_4 (PLX_OFFSET + 0x50) +#define PLX_MAILBOX_5 (PLX_OFFSET + 0x54) +#define PLX_MAILBOX_6 (PLX_OFFSET + 0x58) +#define PLX_MAILBOX_7 (PLX_OFFSET + 0x5C) +#define PLX_DOORBELL_TO_CARD (PLX_OFFSET + 0x60) +#define PLX_DOORBELL_FROM_CARD (PLX_OFFSET + 0x64) +#define PLX_INTERRUPT_CS (PLX_OFFSET + 0x68) +#define PLX_CONTROL (PLX_OFFSET + 0x6C) + +#ifdef __ASSEMBLER__ +#define PLX_DMA_0_MODE (PLX + 0x100) +#define PLX_DMA_0_PCI (PLX + 0x104) +#define PLX_DMA_0_LOCAL (PLX + 0x108) +#define PLX_DMA_0_LENGTH (PLX + 0x10C) +#define PLX_DMA_0_DESC (PLX + 0x110) +#define PLX_DMA_1_MODE (PLX + 0x114) +#define PLX_DMA_1_PCI (PLX + 0x118) +#define PLX_DMA_1_LOCAL (PLX + 0x11C) +#define PLX_DMA_1_LENGTH (PLX + 0x120) +#define PLX_DMA_1_DESC (PLX + 0x124) +#define PLX_DMA_CMD_STS (PLX + 0x128) +#define PLX_DMA_ARBITR_0 (PLX + 0x12C) +#define PLX_DMA_ARBITR_1 (PLX + 0x130) +#endif + +#define DESC_LENGTH 12 + +/* offsets from start of status_t */ +/* card to host */ +#define STATUS_OPEN 0 +#define STATUS_CABLE (STATUS_OPEN + 4) +#define STATUS_RX_OVERRUNS (STATUS_CABLE + 4) +#define STATUS_RX_FRAME_ERRORS (STATUS_RX_OVERRUNS + 4) + +/* host to card */ +#define STATUS_PARITY (STATUS_RX_FRAME_ERRORS + 4) +#define STATUS_ENCODING (STATUS_PARITY + 4) +#define STATUS_CLOCKING (STATUS_ENCODING + 4) +#define STATUS_TX_DESCS (STATUS_CLOCKING + 4) + +#ifndef __ASSEMBLER__ + +typedef struct { + volatile u32 stat; + u32 address; /* PCI address */ + volatile u32 length; +}desc_t; + + +typedef struct { +// Card to host + volatile u32 open; + volatile u32 cable; + volatile u32 rx_overruns; + volatile u32 rx_frame_errors; + +// Host to card + u32 parity; + u32 encoding; + u32 clocking; + desc_t tx_descs[TX_BUFFERS]; +}port_status_t; + +#endif /* __ASSEMBLER__ */ |