summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/net/wan/n2.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/net/wan/n2.c')
-rw-r--r--kernel/drivers/net/wan/n2.c566
1 files changed, 566 insertions, 0 deletions
diff --git a/kernel/drivers/net/wan/n2.c b/kernel/drivers/net/wan/n2.c
new file mode 100644
index 000000000..315bf09d6
--- /dev/null
+++ b/kernel/drivers/net/wan/n2.c
@@ -0,0 +1,566 @@
+/*
+ * SDL Inc. RISCom/N2 synchronous serial card driver for Linux
+ *
+ * Copyright (C) 1998-2003 Krzysztof Halasa <khc@pm.waw.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License
+ * as published by the Free Software Foundation.
+ *
+ * For information see <http://www.kernel.org/pub/linux/utils/net/hdlc/>
+ *
+ * Note: integrated CSU/DSU/DDS are not supported by this driver
+ *
+ * Sources of information:
+ * Hitachi HD64570 SCA User's Manual
+ * SDL Inc. PPP/HDLC/CISCO driver
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/capability.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/in.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/moduleparam.h>
+#include <linux/netdevice.h>
+#include <linux/hdlc.h>
+#include <asm/io.h>
+#include "hd64570.h"
+
+
+static const char* version = "SDL RISCom/N2 driver version: 1.15";
+static const char* devname = "RISCom/N2";
+
+#undef DEBUG_PKT
+#define DEBUG_RINGS
+
+#define USE_WINDOWSIZE 16384
+#define USE_BUS16BITS 1
+#define CLOCK_BASE 9830400 /* 9.8304 MHz */
+#define MAX_PAGES 16 /* 16 RAM pages at max */
+#define MAX_RAM_SIZE 0x80000 /* 512 KB */
+#if MAX_RAM_SIZE > MAX_PAGES * USE_WINDOWSIZE
+#undef MAX_RAM_SIZE
+#define MAX_RAM_SIZE (MAX_PAGES * USE_WINDOWSIZE)
+#endif
+#define N2_IOPORTS 0x10
+#define NEED_DETECT_RAM
+#define NEED_SCA_MSCI_INTR
+#define MAX_TX_BUFFERS 10
+
+static char *hw; /* pointer to hw=xxx command line string */
+
+/* RISCom/N2 Board Registers */
+
+/* PC Control Register */
+#define N2_PCR 0
+#define PCR_RUNSCA 1 /* Run 64570 */
+#define PCR_VPM 2 /* Enable VPM - needed if using RAM above 1 MB */
+#define PCR_ENWIN 4 /* Open window */
+#define PCR_BUS16 8 /* 16-bit bus */
+
+
+/* Memory Base Address Register */
+#define N2_BAR 2
+
+
+/* Page Scan Register */
+#define N2_PSR 4
+#define WIN16K 0x00
+#define WIN32K 0x20
+#define WIN64K 0x40
+#define PSR_WINBITS 0x60
+#define PSR_DMAEN 0x80
+#define PSR_PAGEBITS 0x0F
+
+
+/* Modem Control Reg */
+#define N2_MCR 6
+#define CLOCK_OUT_PORT1 0x80
+#define CLOCK_OUT_PORT0 0x40
+#define TX422_PORT1 0x20
+#define TX422_PORT0 0x10
+#define DSR_PORT1 0x08
+#define DSR_PORT0 0x04
+#define DTR_PORT1 0x02
+#define DTR_PORT0 0x01
+
+
+typedef struct port_s {
+ struct net_device *dev;
+ struct card_s *card;
+ spinlock_t lock; /* TX lock */
+ sync_serial_settings settings;
+ int valid; /* port enabled */
+ int rxpart; /* partial frame received, next frame invalid*/
+ unsigned short encoding;
+ unsigned short parity;
+ u16 rxin; /* rx ring buffer 'in' pointer */
+ u16 txin; /* tx ring buffer 'in' and 'last' pointers */
+ u16 txlast;
+ u8 rxs, txs, tmc; /* SCA registers */
+ u8 phy_node; /* physical port # - 0 or 1 */
+ u8 log_node; /* logical port # */
+}port_t;
+
+
+
+typedef struct card_s {
+ u8 __iomem *winbase; /* ISA window base address */
+ u32 phy_winbase; /* ISA physical base address */
+ u32 ram_size; /* number of bytes */
+ u16 io; /* IO Base address */
+ u16 buff_offset; /* offset of first buffer of first channel */
+ u16 rx_ring_buffers; /* number of buffers in a ring */
+ u16 tx_ring_buffers;
+ u8 irq; /* IRQ (3-15) */
+
+ port_t ports[2];
+ struct card_s *next_card;
+}card_t;
+
+
+static card_t *first_card;
+static card_t **new_card = &first_card;
+
+
+#define sca_reg(reg, card) (0x8000 | (card)->io | \
+ ((reg) & 0x0F) | (((reg) & 0xF0) << 6))
+#define sca_in(reg, card) inb(sca_reg(reg, card))
+#define sca_out(value, reg, card) outb(value, sca_reg(reg, card))
+#define sca_inw(reg, card) inw(sca_reg(reg, card))
+#define sca_outw(value, reg, card) outw(value, sca_reg(reg, card))
+
+#define port_to_card(port) ((port)->card)
+#define log_node(port) ((port)->log_node)
+#define phy_node(port) ((port)->phy_node)
+#define winsize(card) (USE_WINDOWSIZE)
+#define winbase(card) ((card)->winbase)
+#define get_port(card, port) ((card)->ports[port].valid ? \
+ &(card)->ports[port] : NULL)
+
+
+static __inline__ u8 sca_get_page(card_t *card)
+{
+ return inb(card->io + N2_PSR) & PSR_PAGEBITS;
+}
+
+
+static __inline__ void openwin(card_t *card, u8 page)
+{
+ u8 psr = inb(card->io + N2_PSR);
+ outb((psr & ~PSR_PAGEBITS) | page, card->io + N2_PSR);
+}
+
+
+#include "hd64570.c"
+
+
+static void n2_set_iface(port_t *port)
+{
+ card_t *card = port->card;
+ int io = card->io;
+ u8 mcr = inb(io + N2_MCR);
+ u8 msci = get_msci(port);
+ u8 rxs = port->rxs & CLK_BRG_MASK;
+ u8 txs = port->txs & CLK_BRG_MASK;
+
+ switch(port->settings.clock_type) {
+ case CLOCK_INT:
+ mcr |= port->phy_node ? CLOCK_OUT_PORT1 : CLOCK_OUT_PORT0;
+ rxs |= CLK_BRG_RX; /* BRG output */
+ txs |= CLK_RXCLK_TX; /* RX clock */
+ break;
+
+ case CLOCK_TXINT:
+ mcr |= port->phy_node ? CLOCK_OUT_PORT1 : CLOCK_OUT_PORT0;
+ rxs |= CLK_LINE_RX; /* RXC input */
+ txs |= CLK_BRG_TX; /* BRG output */
+ break;
+
+ case CLOCK_TXFROMRX:
+ mcr |= port->phy_node ? CLOCK_OUT_PORT1 : CLOCK_OUT_PORT0;
+ rxs |= CLK_LINE_RX; /* RXC input */
+ txs |= CLK_RXCLK_TX; /* RX clock */
+ break;
+
+ default: /* Clock EXTernal */
+ mcr &= port->phy_node ? ~CLOCK_OUT_PORT1 : ~CLOCK_OUT_PORT0;
+ rxs |= CLK_LINE_RX; /* RXC input */
+ txs |= CLK_LINE_TX; /* TXC input */
+ }
+
+ outb(mcr, io + N2_MCR);
+ port->rxs = rxs;
+ port->txs = txs;
+ sca_out(rxs, msci + RXS, card);
+ sca_out(txs, msci + TXS, card);
+ sca_set_port(port);
+}
+
+
+
+static int n2_open(struct net_device *dev)
+{
+ port_t *port = dev_to_port(dev);
+ int io = port->card->io;
+ u8 mcr = inb(io + N2_MCR) | (port->phy_node ? TX422_PORT1:TX422_PORT0);
+ int result;
+
+ result = hdlc_open(dev);
+ if (result)
+ return result;
+
+ mcr &= port->phy_node ? ~DTR_PORT1 : ~DTR_PORT0; /* set DTR ON */
+ outb(mcr, io + N2_MCR);
+
+ outb(inb(io + N2_PCR) | PCR_ENWIN, io + N2_PCR); /* open window */
+ outb(inb(io + N2_PSR) | PSR_DMAEN, io + N2_PSR); /* enable dma */
+ sca_open(dev);
+ n2_set_iface(port);
+ return 0;
+}
+
+
+
+static int n2_close(struct net_device *dev)
+{
+ port_t *port = dev_to_port(dev);
+ int io = port->card->io;
+ u8 mcr = inb(io+N2_MCR) | (port->phy_node ? TX422_PORT1 : TX422_PORT0);
+
+ sca_close(dev);
+ mcr |= port->phy_node ? DTR_PORT1 : DTR_PORT0; /* set DTR OFF */
+ outb(mcr, io + N2_MCR);
+ hdlc_close(dev);
+ return 0;
+}
+
+
+
+static int n2_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+ const size_t size = sizeof(sync_serial_settings);
+ sync_serial_settings new_line;
+ sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
+ port_t *port = dev_to_port(dev);
+
+#ifdef DEBUG_RINGS
+ if (cmd == SIOCDEVPRIVATE) {
+ sca_dump_rings(dev);
+ return 0;
+ }
+#endif
+ if (cmd != SIOCWANDEV)
+ return hdlc_ioctl(dev, ifr, cmd);
+
+ switch(ifr->ifr_settings.type) {
+ case IF_GET_IFACE:
+ ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
+ if (ifr->ifr_settings.size < size) {
+ ifr->ifr_settings.size = size; /* data size wanted */
+ return -ENOBUFS;
+ }
+ if (copy_to_user(line, &port->settings, size))
+ return -EFAULT;
+ return 0;
+
+ case IF_IFACE_SYNC_SERIAL:
+ if(!capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ if (copy_from_user(&new_line, line, size))
+ return -EFAULT;
+
+ if (new_line.clock_type != CLOCK_EXT &&
+ new_line.clock_type != CLOCK_TXFROMRX &&
+ new_line.clock_type != CLOCK_INT &&
+ new_line.clock_type != CLOCK_TXINT)
+ return -EINVAL; /* No such clock setting */
+
+ if (new_line.loopback != 0 && new_line.loopback != 1)
+ return -EINVAL;
+
+ memcpy(&port->settings, &new_line, size); /* Update settings */
+ n2_set_iface(port);
+ return 0;
+
+ default:
+ return hdlc_ioctl(dev, ifr, cmd);
+ }
+}
+
+
+
+static void n2_destroy_card(card_t *card)
+{
+ int cnt;
+
+ for (cnt = 0; cnt < 2; cnt++)
+ if (card->ports[cnt].card) {
+ struct net_device *dev = port_to_dev(&card->ports[cnt]);
+ unregister_hdlc_device(dev);
+ }
+
+ if (card->irq)
+ free_irq(card->irq, card);
+
+ if (card->winbase) {
+ iounmap(card->winbase);
+ release_mem_region(card->phy_winbase, USE_WINDOWSIZE);
+ }
+
+ if (card->io)
+ release_region(card->io, N2_IOPORTS);
+ if (card->ports[0].dev)
+ free_netdev(card->ports[0].dev);
+ if (card->ports[1].dev)
+ free_netdev(card->ports[1].dev);
+ kfree(card);
+}
+
+static const struct net_device_ops n2_ops = {
+ .ndo_open = n2_open,
+ .ndo_stop = n2_close,
+ .ndo_change_mtu = hdlc_change_mtu,
+ .ndo_start_xmit = hdlc_start_xmit,
+ .ndo_do_ioctl = n2_ioctl,
+};
+
+static int __init n2_run(unsigned long io, unsigned long irq,
+ unsigned long winbase, long valid0, long valid1)
+{
+ card_t *card;
+ u8 cnt, pcr;
+ int i;
+
+ if (io < 0x200 || io > 0x3FF || (io % N2_IOPORTS) != 0) {
+ pr_err("invalid I/O port value\n");
+ return -ENODEV;
+ }
+
+ if (irq < 3 || irq > 15 || irq == 6) /* FIXME */ {
+ pr_err("invalid IRQ value\n");
+ return -ENODEV;
+ }
+
+ if (winbase < 0xA0000 || winbase > 0xFFFFF || (winbase & 0xFFF) != 0) {
+ pr_err("invalid RAM value\n");
+ return -ENODEV;
+ }
+
+ card = kzalloc(sizeof(card_t), GFP_KERNEL);
+ if (card == NULL)
+ return -ENOBUFS;
+
+ card->ports[0].dev = alloc_hdlcdev(&card->ports[0]);
+ card->ports[1].dev = alloc_hdlcdev(&card->ports[1]);
+ if (!card->ports[0].dev || !card->ports[1].dev) {
+ pr_err("unable to allocate memory\n");
+ n2_destroy_card(card);
+ return -ENOMEM;
+ }
+
+ if (!request_region(io, N2_IOPORTS, devname)) {
+ pr_err("I/O port region in use\n");
+ n2_destroy_card(card);
+ return -EBUSY;
+ }
+ card->io = io;
+
+ if (request_irq(irq, sca_intr, 0, devname, card)) {
+ pr_err("could not allocate IRQ\n");
+ n2_destroy_card(card);
+ return -EBUSY;
+ }
+ card->irq = irq;
+
+ if (!request_mem_region(winbase, USE_WINDOWSIZE, devname)) {
+ pr_err("could not request RAM window\n");
+ n2_destroy_card(card);
+ return -EBUSY;
+ }
+ card->phy_winbase = winbase;
+ card->winbase = ioremap(winbase, USE_WINDOWSIZE);
+ if (!card->winbase) {
+ pr_err("ioremap() failed\n");
+ n2_destroy_card(card);
+ return -EFAULT;
+ }
+
+ outb(0, io + N2_PCR);
+ outb(winbase >> 12, io + N2_BAR);
+
+ switch (USE_WINDOWSIZE) {
+ case 16384:
+ outb(WIN16K, io + N2_PSR);
+ break;
+
+ case 32768:
+ outb(WIN32K, io + N2_PSR);
+ break;
+
+ case 65536:
+ outb(WIN64K, io + N2_PSR);
+ break;
+
+ default:
+ pr_err("invalid window size\n");
+ n2_destroy_card(card);
+ return -ENODEV;
+ }
+
+ pcr = PCR_ENWIN | PCR_VPM | (USE_BUS16BITS ? PCR_BUS16 : 0);
+ outb(pcr, io + N2_PCR);
+
+ card->ram_size = sca_detect_ram(card, card->winbase, MAX_RAM_SIZE);
+
+ /* number of TX + RX buffers for one port */
+ i = card->ram_size / ((valid0 + valid1) * (sizeof(pkt_desc) +
+ HDLC_MAX_MRU));
+
+ card->tx_ring_buffers = min(i / 2, MAX_TX_BUFFERS);
+ card->rx_ring_buffers = i - card->tx_ring_buffers;
+
+ card->buff_offset = (valid0 + valid1) * sizeof(pkt_desc) *
+ (card->tx_ring_buffers + card->rx_ring_buffers);
+
+ pr_info("RISCom/N2 %u KB RAM, IRQ%u, using %u TX + %u RX packets rings\n",
+ card->ram_size / 1024, card->irq,
+ card->tx_ring_buffers, card->rx_ring_buffers);
+
+ if (card->tx_ring_buffers < 1) {
+ pr_err("RAM test failed\n");
+ n2_destroy_card(card);
+ return -EIO;
+ }
+
+ pcr |= PCR_RUNSCA; /* run SCA */
+ outb(pcr, io + N2_PCR);
+ outb(0, io + N2_MCR);
+
+ sca_init(card, 0);
+ for (cnt = 0; cnt < 2; cnt++) {
+ port_t *port = &card->ports[cnt];
+ struct net_device *dev = port_to_dev(port);
+ hdlc_device *hdlc = dev_to_hdlc(dev);
+
+ if ((cnt == 0 && !valid0) || (cnt == 1 && !valid1))
+ continue;
+
+ port->phy_node = cnt;
+ port->valid = 1;
+
+ if ((cnt == 1) && valid0)
+ port->log_node = 1;
+
+ spin_lock_init(&port->lock);
+ dev->irq = irq;
+ dev->mem_start = winbase;
+ dev->mem_end = winbase + USE_WINDOWSIZE - 1;
+ dev->tx_queue_len = 50;
+ dev->netdev_ops = &n2_ops;
+ hdlc->attach = sca_attach;
+ hdlc->xmit = sca_xmit;
+ port->settings.clock_type = CLOCK_EXT;
+ port->card = card;
+
+ if (register_hdlc_device(dev)) {
+ pr_warn("unable to register hdlc device\n");
+ port->card = NULL;
+ n2_destroy_card(card);
+ return -ENOBUFS;
+ }
+ sca_init_port(port); /* Set up SCA memory */
+
+ netdev_info(dev, "RISCom/N2 node %d\n", port->phy_node);
+ }
+
+ *new_card = card;
+ new_card = &card->next_card;
+
+ return 0;
+}
+
+
+
+static int __init n2_init(void)
+{
+ if (hw==NULL) {
+#ifdef MODULE
+ pr_info("no card initialized\n");
+#endif
+ return -EINVAL; /* no parameters specified, abort */
+ }
+
+ pr_info("%s\n", version);
+
+ do {
+ unsigned long io, irq, ram;
+ long valid[2] = { 0, 0 }; /* Default = both ports disabled */
+
+ io = simple_strtoul(hw, &hw, 0);
+
+ if (*hw++ != ',')
+ break;
+ irq = simple_strtoul(hw, &hw, 0);
+
+ if (*hw++ != ',')
+ break;
+ ram = simple_strtoul(hw, &hw, 0);
+
+ if (*hw++ != ',')
+ break;
+ while(1) {
+ if (*hw == '0' && !valid[0])
+ valid[0] = 1; /* Port 0 enabled */
+ else if (*hw == '1' && !valid[1])
+ valid[1] = 1; /* Port 1 enabled */
+ else
+ break;
+ hw++;
+ }
+
+ if (!valid[0] && !valid[1])
+ break; /* at least one port must be used */
+
+ if (*hw == ':' || *hw == '\x0')
+ n2_run(io, irq, ram, valid[0], valid[1]);
+
+ if (*hw == '\x0')
+ return first_card ? 0 : -EINVAL;
+ }while(*hw++ == ':');
+
+ pr_err("invalid hardware parameters\n");
+ return first_card ? 0 : -EINVAL;
+}
+
+
+static void __exit n2_cleanup(void)
+{
+ card_t *card = first_card;
+
+ while (card) {
+ card_t *ptr = card;
+ card = card->next_card;
+ n2_destroy_card(ptr);
+ }
+}
+
+
+module_init(n2_init);
+module_exit(n2_cleanup);
+
+MODULE_AUTHOR("Krzysztof Halasa <khc@pm.waw.pl>");
+MODULE_DESCRIPTION("RISCom/N2 serial port driver");
+MODULE_LICENSE("GPL v2");
+module_param(hw, charp, 0444);
+MODULE_PARM_DESC(hw, "io,irq,ram,ports:io,irq,...");