summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/net/wan/lmc/lmc_main.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/net/wan/lmc/lmc_main.c')
-rw-r--r--kernel/drivers/net/wan/lmc/lmc_main.c2130
1 files changed, 2130 insertions, 0 deletions
diff --git a/kernel/drivers/net/wan/lmc/lmc_main.c b/kernel/drivers/net/wan/lmc/lmc_main.c
new file mode 100644
index 000000000..317bc79cc
--- /dev/null
+++ b/kernel/drivers/net/wan/lmc/lmc_main.c
@@ -0,0 +1,2130 @@
+ /*
+ * Copyright (c) 1997-2000 LAN Media Corporation (LMC)
+ * All rights reserved. www.lanmedia.com
+ * Generic HDLC port Copyright (C) 2008 Krzysztof Halasa <khc@pm.waw.pl>
+ *
+ * This code is written by:
+ * Andrew Stanley-Jones (asj@cban.com)
+ * Rob Braun (bbraun@vix.com),
+ * Michael Graff (explorer@vix.com) and
+ * Matt Thomas (matt@3am-software.com).
+ *
+ * With Help By:
+ * David Boggs
+ * Ron Crane
+ * Alan Cox
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License version 2, incorporated herein by reference.
+ *
+ * Driver for the LanMedia LMC5200, LMC5245, LMC1000, LMC1200 cards.
+ *
+ * To control link specific options lmcctl is required.
+ * It can be obtained from ftp.lanmedia.com.
+ *
+ * Linux driver notes:
+ * Linux uses the device struct lmc_private to pass private information
+ * around.
+ *
+ * The initialization portion of this driver (the lmc_reset() and the
+ * lmc_dec_reset() functions, as well as the led controls and the
+ * lmc_initcsrs() functions.
+ *
+ * The watchdog function runs every second and checks to see if
+ * we still have link, and that the timing source is what we expected
+ * it to be. If link is lost, the interface is marked down, and
+ * we no longer can transmit.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/ptrace.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/hdlc.h>
+#include <linux/in.h>
+#include <linux/if_arp.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/inet.h>
+#include <linux/bitops.h>
+#include <asm/processor.h> /* Processor type for cache alignment. */
+#include <asm/io.h>
+#include <asm/dma.h>
+#include <asm/uaccess.h>
+//#include <asm/spinlock.h>
+
+#define DRIVER_MAJOR_VERSION 1
+#define DRIVER_MINOR_VERSION 34
+#define DRIVER_SUB_VERSION 0
+
+#define DRIVER_VERSION ((DRIVER_MAJOR_VERSION << 8) + DRIVER_MINOR_VERSION)
+
+#include "lmc.h"
+#include "lmc_var.h"
+#include "lmc_ioctl.h"
+#include "lmc_debug.h"
+#include "lmc_proto.h"
+
+static int LMC_PKT_BUF_SZ = 1542;
+
+static const struct pci_device_id lmc_pci_tbl[] = {
+ { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TULIP_FAST,
+ PCI_VENDOR_ID_LMC, PCI_ANY_ID },
+ { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_TULIP_FAST,
+ PCI_ANY_ID, PCI_VENDOR_ID_LMC },
+ { 0 }
+};
+
+MODULE_DEVICE_TABLE(pci, lmc_pci_tbl);
+MODULE_LICENSE("GPL v2");
+
+
+static netdev_tx_t lmc_start_xmit(struct sk_buff *skb,
+ struct net_device *dev);
+static int lmc_rx (struct net_device *dev);
+static int lmc_open(struct net_device *dev);
+static int lmc_close(struct net_device *dev);
+static struct net_device_stats *lmc_get_stats(struct net_device *dev);
+static irqreturn_t lmc_interrupt(int irq, void *dev_instance);
+static void lmc_initcsrs(lmc_softc_t * const sc, lmc_csrptr_t csr_base, size_t csr_size);
+static void lmc_softreset(lmc_softc_t * const);
+static void lmc_running_reset(struct net_device *dev);
+static int lmc_ifdown(struct net_device * const);
+static void lmc_watchdog(unsigned long data);
+static void lmc_reset(lmc_softc_t * const sc);
+static void lmc_dec_reset(lmc_softc_t * const sc);
+static void lmc_driver_timeout(struct net_device *dev);
+
+/*
+ * linux reserves 16 device specific IOCTLs. We call them
+ * LMCIOC* to control various bits of our world.
+ */
+int lmc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) /*fold00*/
+{
+ lmc_softc_t *sc = dev_to_sc(dev);
+ lmc_ctl_t ctl;
+ int ret = -EOPNOTSUPP;
+ u16 regVal;
+ unsigned long flags;
+
+ lmc_trace(dev, "lmc_ioctl in");
+
+ /*
+ * Most functions mess with the structure
+ * Disable interrupts while we do the polling
+ */
+
+ switch (cmd) {
+ /*
+ * Return current driver state. Since we keep this up
+ * To date internally, just copy this out to the user.
+ */
+ case LMCIOCGINFO: /*fold01*/
+ if (copy_to_user(ifr->ifr_data, &sc->ictl, sizeof(lmc_ctl_t)))
+ ret = -EFAULT;
+ else
+ ret = 0;
+ break;
+
+ case LMCIOCSINFO: /*fold01*/
+ if (!capable(CAP_NET_ADMIN)) {
+ ret = -EPERM;
+ break;
+ }
+
+ if(dev->flags & IFF_UP){
+ ret = -EBUSY;
+ break;
+ }
+
+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(lmc_ctl_t))) {
+ ret = -EFAULT;
+ break;
+ }
+
+ spin_lock_irqsave(&sc->lmc_lock, flags);
+ sc->lmc_media->set_status (sc, &ctl);
+
+ if(ctl.crc_length != sc->ictl.crc_length) {
+ sc->lmc_media->set_crc_length(sc, ctl.crc_length);
+ if (sc->ictl.crc_length == LMC_CTL_CRC_LENGTH_16)
+ sc->TxDescriptControlInit |= LMC_TDES_ADD_CRC_DISABLE;
+ else
+ sc->TxDescriptControlInit &= ~LMC_TDES_ADD_CRC_DISABLE;
+ }
+ spin_unlock_irqrestore(&sc->lmc_lock, flags);
+
+ ret = 0;
+ break;
+
+ case LMCIOCIFTYPE: /*fold01*/
+ {
+ u16 old_type = sc->if_type;
+ u16 new_type;
+
+ if (!capable(CAP_NET_ADMIN)) {
+ ret = -EPERM;
+ break;
+ }
+
+ if (copy_from_user(&new_type, ifr->ifr_data, sizeof(u16))) {
+ ret = -EFAULT;
+ break;
+ }
+
+
+ if (new_type == old_type)
+ {
+ ret = 0 ;
+ break; /* no change */
+ }
+
+ spin_lock_irqsave(&sc->lmc_lock, flags);
+ lmc_proto_close(sc);
+
+ sc->if_type = new_type;
+ lmc_proto_attach(sc);
+ ret = lmc_proto_open(sc);
+ spin_unlock_irqrestore(&sc->lmc_lock, flags);
+ break;
+ }
+
+ case LMCIOCGETXINFO: /*fold01*/
+ spin_lock_irqsave(&sc->lmc_lock, flags);
+ sc->lmc_xinfo.Magic0 = 0xBEEFCAFE;
+
+ sc->lmc_xinfo.PciCardType = sc->lmc_cardtype;
+ sc->lmc_xinfo.PciSlotNumber = 0;
+ sc->lmc_xinfo.DriverMajorVersion = DRIVER_MAJOR_VERSION;
+ sc->lmc_xinfo.DriverMinorVersion = DRIVER_MINOR_VERSION;
+ sc->lmc_xinfo.DriverSubVersion = DRIVER_SUB_VERSION;
+ sc->lmc_xinfo.XilinxRevisionNumber =
+ lmc_mii_readreg (sc, 0, 3) & 0xf;
+ sc->lmc_xinfo.MaxFrameSize = LMC_PKT_BUF_SZ;
+ sc->lmc_xinfo.link_status = sc->lmc_media->get_link_status (sc);
+ sc->lmc_xinfo.mii_reg16 = lmc_mii_readreg (sc, 0, 16);
+ spin_unlock_irqrestore(&sc->lmc_lock, flags);
+
+ sc->lmc_xinfo.Magic1 = 0xDEADBEEF;
+
+ if (copy_to_user(ifr->ifr_data, &sc->lmc_xinfo,
+ sizeof(struct lmc_xinfo)))
+ ret = -EFAULT;
+ else
+ ret = 0;
+
+ break;
+
+ case LMCIOCGETLMCSTATS:
+ spin_lock_irqsave(&sc->lmc_lock, flags);
+ if (sc->lmc_cardtype == LMC_CARDTYPE_T1) {
+ lmc_mii_writereg(sc, 0, 17, T1FRAMER_FERR_LSB);
+ sc->extra_stats.framingBitErrorCount +=
+ lmc_mii_readreg(sc, 0, 18) & 0xff;
+ lmc_mii_writereg(sc, 0, 17, T1FRAMER_FERR_MSB);
+ sc->extra_stats.framingBitErrorCount +=
+ (lmc_mii_readreg(sc, 0, 18) & 0xff) << 8;
+ lmc_mii_writereg(sc, 0, 17, T1FRAMER_LCV_LSB);
+ sc->extra_stats.lineCodeViolationCount +=
+ lmc_mii_readreg(sc, 0, 18) & 0xff;
+ lmc_mii_writereg(sc, 0, 17, T1FRAMER_LCV_MSB);
+ sc->extra_stats.lineCodeViolationCount +=
+ (lmc_mii_readreg(sc, 0, 18) & 0xff) << 8;
+ lmc_mii_writereg(sc, 0, 17, T1FRAMER_AERR);
+ regVal = lmc_mii_readreg(sc, 0, 18) & 0xff;
+
+ sc->extra_stats.lossOfFrameCount +=
+ (regVal & T1FRAMER_LOF_MASK) >> 4;
+ sc->extra_stats.changeOfFrameAlignmentCount +=
+ (regVal & T1FRAMER_COFA_MASK) >> 2;
+ sc->extra_stats.severelyErroredFrameCount +=
+ regVal & T1FRAMER_SEF_MASK;
+ }
+ spin_unlock_irqrestore(&sc->lmc_lock, flags);
+ if (copy_to_user(ifr->ifr_data, &sc->lmc_device->stats,
+ sizeof(sc->lmc_device->stats)) ||
+ copy_to_user(ifr->ifr_data + sizeof(sc->lmc_device->stats),
+ &sc->extra_stats, sizeof(sc->extra_stats)))
+ ret = -EFAULT;
+ else
+ ret = 0;
+ break;
+
+ case LMCIOCCLEARLMCSTATS:
+ if (!capable(CAP_NET_ADMIN)) {
+ ret = -EPERM;
+ break;
+ }
+
+ spin_lock_irqsave(&sc->lmc_lock, flags);
+ memset(&sc->lmc_device->stats, 0, sizeof(sc->lmc_device->stats));
+ memset(&sc->extra_stats, 0, sizeof(sc->extra_stats));
+ sc->extra_stats.check = STATCHECK;
+ sc->extra_stats.version_size = (DRIVER_VERSION << 16) +
+ sizeof(sc->lmc_device->stats) + sizeof(sc->extra_stats);
+ sc->extra_stats.lmc_cardtype = sc->lmc_cardtype;
+ spin_unlock_irqrestore(&sc->lmc_lock, flags);
+ ret = 0;
+ break;
+
+ case LMCIOCSETCIRCUIT: /*fold01*/
+ if (!capable(CAP_NET_ADMIN)){
+ ret = -EPERM;
+ break;
+ }
+
+ if(dev->flags & IFF_UP){
+ ret = -EBUSY;
+ break;
+ }
+
+ if (copy_from_user(&ctl, ifr->ifr_data, sizeof(lmc_ctl_t))) {
+ ret = -EFAULT;
+ break;
+ }
+ spin_lock_irqsave(&sc->lmc_lock, flags);
+ sc->lmc_media->set_circuit_type(sc, ctl.circuit_type);
+ sc->ictl.circuit_type = ctl.circuit_type;
+ spin_unlock_irqrestore(&sc->lmc_lock, flags);
+ ret = 0;
+
+ break;
+
+ case LMCIOCRESET: /*fold01*/
+ if (!capable(CAP_NET_ADMIN)){
+ ret = -EPERM;
+ break;
+ }
+
+ spin_lock_irqsave(&sc->lmc_lock, flags);
+ /* Reset driver and bring back to current state */
+ printk (" REG16 before reset +%04x\n", lmc_mii_readreg (sc, 0, 16));
+ lmc_running_reset (dev);
+ printk (" REG16 after reset +%04x\n", lmc_mii_readreg (sc, 0, 16));
+
+ LMC_EVENT_LOG(LMC_EVENT_FORCEDRESET, LMC_CSR_READ (sc, csr_status), lmc_mii_readreg (sc, 0, 16));
+ spin_unlock_irqrestore(&sc->lmc_lock, flags);
+
+ ret = 0;
+ break;
+
+#ifdef DEBUG
+ case LMCIOCDUMPEVENTLOG:
+ if (copy_to_user(ifr->ifr_data, &lmcEventLogIndex, sizeof(u32))) {
+ ret = -EFAULT;
+ break;
+ }
+ if (copy_to_user(ifr->ifr_data + sizeof(u32), lmcEventLogBuf,
+ sizeof(lmcEventLogBuf)))
+ ret = -EFAULT;
+ else
+ ret = 0;
+
+ break;
+#endif /* end ifdef _DBG_EVENTLOG */
+ case LMCIOCT1CONTROL: /*fold01*/
+ if (sc->lmc_cardtype != LMC_CARDTYPE_T1){
+ ret = -EOPNOTSUPP;
+ break;
+ }
+ break;
+ case LMCIOCXILINX: /*fold01*/
+ {
+ struct lmc_xilinx_control xc; /*fold02*/
+
+ if (!capable(CAP_NET_ADMIN)){
+ ret = -EPERM;
+ break;
+ }
+
+ /*
+ * Stop the xwitter whlie we restart the hardware
+ */
+ netif_stop_queue(dev);
+
+ if (copy_from_user(&xc, ifr->ifr_data, sizeof(struct lmc_xilinx_control))) {
+ ret = -EFAULT;
+ break;
+ }
+ switch(xc.command){
+ case lmc_xilinx_reset: /*fold02*/
+ {
+ u16 mii;
+ spin_lock_irqsave(&sc->lmc_lock, flags);
+ mii = lmc_mii_readreg (sc, 0, 16);
+
+ /*
+ * Make all of them 0 and make input
+ */
+ lmc_gpio_mkinput(sc, 0xff);
+
+ /*
+ * make the reset output
+ */
+ lmc_gpio_mkoutput(sc, LMC_GEP_RESET);
+
+ /*
+ * RESET low to force configuration. This also forces
+ * the transmitter clock to be internal, but we expect to reset
+ * that later anyway.
+ */
+
+ sc->lmc_gpio &= ~LMC_GEP_RESET;
+ LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio);
+
+
+ /*
+ * hold for more than 10 microseconds
+ */
+ udelay(50);
+
+ sc->lmc_gpio |= LMC_GEP_RESET;
+ LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio);
+
+
+ /*
+ * stop driving Xilinx-related signals
+ */
+ lmc_gpio_mkinput(sc, 0xff);
+
+ /* Reset the frammer hardware */
+ sc->lmc_media->set_link_status (sc, 1);
+ sc->lmc_media->set_status (sc, NULL);
+// lmc_softreset(sc);
+
+ {
+ int i;
+ for(i = 0; i < 5; i++){
+ lmc_led_on(sc, LMC_DS3_LED0);
+ mdelay(100);
+ lmc_led_off(sc, LMC_DS3_LED0);
+ lmc_led_on(sc, LMC_DS3_LED1);
+ mdelay(100);
+ lmc_led_off(sc, LMC_DS3_LED1);
+ lmc_led_on(sc, LMC_DS3_LED3);
+ mdelay(100);
+ lmc_led_off(sc, LMC_DS3_LED3);
+ lmc_led_on(sc, LMC_DS3_LED2);
+ mdelay(100);
+ lmc_led_off(sc, LMC_DS3_LED2);
+ }
+ }
+ spin_unlock_irqrestore(&sc->lmc_lock, flags);
+
+
+
+ ret = 0x0;
+
+ }
+
+ break;
+ case lmc_xilinx_load_prom: /*fold02*/
+ {
+ u16 mii;
+ int timeout = 500000;
+ spin_lock_irqsave(&sc->lmc_lock, flags);
+ mii = lmc_mii_readreg (sc, 0, 16);
+
+ /*
+ * Make all of them 0 and make input
+ */
+ lmc_gpio_mkinput(sc, 0xff);
+
+ /*
+ * make the reset output
+ */
+ lmc_gpio_mkoutput(sc, LMC_GEP_DP | LMC_GEP_RESET);
+
+ /*
+ * RESET low to force configuration. This also forces
+ * the transmitter clock to be internal, but we expect to reset
+ * that later anyway.
+ */
+
+ sc->lmc_gpio &= ~(LMC_GEP_RESET | LMC_GEP_DP);
+ LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio);
+
+
+ /*
+ * hold for more than 10 microseconds
+ */
+ udelay(50);
+
+ sc->lmc_gpio |= LMC_GEP_DP | LMC_GEP_RESET;
+ LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio);
+
+ /*
+ * busy wait for the chip to reset
+ */
+ while( (LMC_CSR_READ(sc, csr_gp) & LMC_GEP_INIT) == 0 &&
+ (timeout-- > 0))
+ cpu_relax();
+
+
+ /*
+ * stop driving Xilinx-related signals
+ */
+ lmc_gpio_mkinput(sc, 0xff);
+ spin_unlock_irqrestore(&sc->lmc_lock, flags);
+
+ ret = 0x0;
+
+
+ break;
+
+ }
+
+ case lmc_xilinx_load: /*fold02*/
+ {
+ char *data;
+ int pos;
+ int timeout = 500000;
+
+ if (!xc.data) {
+ ret = -EINVAL;
+ break;
+ }
+
+ data = kmalloc(xc.len, GFP_KERNEL);
+ if (!data) {
+ ret = -ENOMEM;
+ break;
+ }
+
+ if(copy_from_user(data, xc.data, xc.len))
+ {
+ kfree(data);
+ ret = -ENOMEM;
+ break;
+ }
+
+ printk("%s: Starting load of data Len: %d at 0x%p == 0x%p\n", dev->name, xc.len, xc.data, data);
+
+ spin_lock_irqsave(&sc->lmc_lock, flags);
+ lmc_gpio_mkinput(sc, 0xff);
+
+ /*
+ * Clear the Xilinx and start prgramming from the DEC
+ */
+
+ /*
+ * Set ouput as:
+ * Reset: 0 (active)
+ * DP: 0 (active)
+ * Mode: 1
+ *
+ */
+ sc->lmc_gpio = 0x00;
+ sc->lmc_gpio &= ~LMC_GEP_DP;
+ sc->lmc_gpio &= ~LMC_GEP_RESET;
+ sc->lmc_gpio |= LMC_GEP_MODE;
+ LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio);
+
+ lmc_gpio_mkoutput(sc, LMC_GEP_MODE | LMC_GEP_DP | LMC_GEP_RESET);
+
+ /*
+ * Wait at least 10 us 20 to be safe
+ */
+ udelay(50);
+
+ /*
+ * Clear reset and activate programming lines
+ * Reset: Input
+ * DP: Input
+ * Clock: Output
+ * Data: Output
+ * Mode: Output
+ */
+ lmc_gpio_mkinput(sc, LMC_GEP_DP | LMC_GEP_RESET);
+
+ /*
+ * Set LOAD, DATA, Clock to 1
+ */
+ sc->lmc_gpio = 0x00;
+ sc->lmc_gpio |= LMC_GEP_MODE;
+ sc->lmc_gpio |= LMC_GEP_DATA;
+ sc->lmc_gpio |= LMC_GEP_CLK;
+ LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio);
+
+ lmc_gpio_mkoutput(sc, LMC_GEP_DATA | LMC_GEP_CLK | LMC_GEP_MODE );
+
+ /*
+ * busy wait for the chip to reset
+ */
+ while( (LMC_CSR_READ(sc, csr_gp) & LMC_GEP_INIT) == 0 &&
+ (timeout-- > 0))
+ cpu_relax();
+
+ printk(KERN_DEBUG "%s: Waited %d for the Xilinx to clear it's memory\n", dev->name, 500000-timeout);
+
+ for(pos = 0; pos < xc.len; pos++){
+ switch(data[pos]){
+ case 0:
+ sc->lmc_gpio &= ~LMC_GEP_DATA; /* Data is 0 */
+ break;
+ case 1:
+ sc->lmc_gpio |= LMC_GEP_DATA; /* Data is 1 */
+ break;
+ default:
+ printk(KERN_WARNING "%s Bad data in xilinx programming data at %d, got %d wanted 0 or 1\n", dev->name, pos, data[pos]);
+ sc->lmc_gpio |= LMC_GEP_DATA; /* Assume it's 1 */
+ }
+ sc->lmc_gpio &= ~LMC_GEP_CLK; /* Clock to zero */
+ sc->lmc_gpio |= LMC_GEP_MODE;
+ LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio);
+ udelay(1);
+
+ sc->lmc_gpio |= LMC_GEP_CLK; /* Put the clack back to one */
+ sc->lmc_gpio |= LMC_GEP_MODE;
+ LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio);
+ udelay(1);
+ }
+ if((LMC_CSR_READ(sc, csr_gp) & LMC_GEP_INIT) == 0){
+ printk(KERN_WARNING "%s: Reprogramming FAILED. Needs to be reprogrammed. (corrupted data)\n", dev->name);
+ }
+ else if((LMC_CSR_READ(sc, csr_gp) & LMC_GEP_DP) == 0){
+ printk(KERN_WARNING "%s: Reprogramming FAILED. Needs to be reprogrammed. (done)\n", dev->name);
+ }
+ else {
+ printk(KERN_DEBUG "%s: Done reprogramming Xilinx, %d bits, good luck!\n", dev->name, pos);
+ }
+
+ lmc_gpio_mkinput(sc, 0xff);
+
+ sc->lmc_miireg16 |= LMC_MII16_FIFO_RESET;
+ lmc_mii_writereg(sc, 0, 16, sc->lmc_miireg16);
+
+ sc->lmc_miireg16 &= ~LMC_MII16_FIFO_RESET;
+ lmc_mii_writereg(sc, 0, 16, sc->lmc_miireg16);
+ spin_unlock_irqrestore(&sc->lmc_lock, flags);
+
+ kfree(data);
+
+ ret = 0;
+
+ break;
+ }
+ default: /*fold02*/
+ ret = -EBADE;
+ break;
+ }
+
+ netif_wake_queue(dev);
+ sc->lmc_txfull = 0;
+
+ }
+ break;
+ default: /*fold01*/
+ /* If we don't know what to do, give the protocol a shot. */
+ ret = lmc_proto_ioctl (sc, ifr, cmd);
+ break;
+ }
+
+ lmc_trace(dev, "lmc_ioctl out");
+
+ return ret;
+}
+
+
+/* the watchdog process that cruises around */
+static void lmc_watchdog (unsigned long data) /*fold00*/
+{
+ struct net_device *dev = (struct net_device *)data;
+ lmc_softc_t *sc = dev_to_sc(dev);
+ int link_status;
+ u32 ticks;
+ unsigned long flags;
+
+ lmc_trace(dev, "lmc_watchdog in");
+
+ spin_lock_irqsave(&sc->lmc_lock, flags);
+
+ if(sc->check != 0xBEAFCAFE){
+ printk("LMC: Corrupt net_device struct, breaking out\n");
+ spin_unlock_irqrestore(&sc->lmc_lock, flags);
+ return;
+ }
+
+
+ /* Make sure the tx jabber and rx watchdog are off,
+ * and the transmit and receive processes are running.
+ */
+
+ LMC_CSR_WRITE (sc, csr_15, 0x00000011);
+ sc->lmc_cmdmode |= TULIP_CMD_TXRUN | TULIP_CMD_RXRUN;
+ LMC_CSR_WRITE (sc, csr_command, sc->lmc_cmdmode);
+
+ if (sc->lmc_ok == 0)
+ goto kick_timer;
+
+ LMC_EVENT_LOG(LMC_EVENT_WATCHDOG, LMC_CSR_READ (sc, csr_status), lmc_mii_readreg (sc, 0, 16));
+
+ /* --- begin time out check -----------------------------------
+ * check for a transmit interrupt timeout
+ * Has the packet xmt vs xmt serviced threshold been exceeded */
+ if (sc->lmc_taint_tx == sc->lastlmc_taint_tx &&
+ sc->lmc_device->stats.tx_packets > sc->lasttx_packets &&
+ sc->tx_TimeoutInd == 0)
+ {
+
+ /* wait for the watchdog to come around again */
+ sc->tx_TimeoutInd = 1;
+ }
+ else if (sc->lmc_taint_tx == sc->lastlmc_taint_tx &&
+ sc->lmc_device->stats.tx_packets > sc->lasttx_packets &&
+ sc->tx_TimeoutInd)
+ {
+
+ LMC_EVENT_LOG(LMC_EVENT_XMTINTTMO, LMC_CSR_READ (sc, csr_status), 0);
+
+ sc->tx_TimeoutDisplay = 1;
+ sc->extra_stats.tx_TimeoutCnt++;
+
+ /* DEC chip is stuck, hit it with a RESET!!!! */
+ lmc_running_reset (dev);
+
+
+ /* look at receive & transmit process state to make sure they are running */
+ LMC_EVENT_LOG(LMC_EVENT_RESET1, LMC_CSR_READ (sc, csr_status), 0);
+
+ /* look at: DSR - 02 for Reg 16
+ * CTS - 08
+ * DCD - 10
+ * RI - 20
+ * for Reg 17
+ */
+ LMC_EVENT_LOG(LMC_EVENT_RESET2, lmc_mii_readreg (sc, 0, 16), lmc_mii_readreg (sc, 0, 17));
+
+ /* reset the transmit timeout detection flag */
+ sc->tx_TimeoutInd = 0;
+ sc->lastlmc_taint_tx = sc->lmc_taint_tx;
+ sc->lasttx_packets = sc->lmc_device->stats.tx_packets;
+ } else {
+ sc->tx_TimeoutInd = 0;
+ sc->lastlmc_taint_tx = sc->lmc_taint_tx;
+ sc->lasttx_packets = sc->lmc_device->stats.tx_packets;
+ }
+
+ /* --- end time out check ----------------------------------- */
+
+
+ link_status = sc->lmc_media->get_link_status (sc);
+
+ /*
+ * hardware level link lost, but the interface is marked as up.
+ * Mark it as down.
+ */
+ if ((link_status == 0) && (sc->last_link_status != 0)) {
+ printk(KERN_WARNING "%s: hardware/physical link down\n", dev->name);
+ sc->last_link_status = 0;
+ /* lmc_reset (sc); Why reset??? The link can go down ok */
+
+ /* Inform the world that link has been lost */
+ netif_carrier_off(dev);
+ }
+
+ /*
+ * hardware link is up, but the interface is marked as down.
+ * Bring it back up again.
+ */
+ if (link_status != 0 && sc->last_link_status == 0) {
+ printk(KERN_WARNING "%s: hardware/physical link up\n", dev->name);
+ sc->last_link_status = 1;
+ /* lmc_reset (sc); Again why reset??? */
+
+ netif_carrier_on(dev);
+ }
+
+ /* Call media specific watchdog functions */
+ sc->lmc_media->watchdog(sc);
+
+ /*
+ * Poke the transmitter to make sure it
+ * never stops, even if we run out of mem
+ */
+ LMC_CSR_WRITE(sc, csr_rxpoll, 0);
+
+ /*
+ * Check for code that failed
+ * and try and fix it as appropriate
+ */
+ if(sc->failed_ring == 1){
+ /*
+ * Failed to setup the recv/xmit rin
+ * Try again
+ */
+ sc->failed_ring = 0;
+ lmc_softreset(sc);
+ }
+ if(sc->failed_recv_alloc == 1){
+ /*
+ * We failed to alloc mem in the
+ * interrupt handler, go through the rings
+ * and rebuild them
+ */
+ sc->failed_recv_alloc = 0;
+ lmc_softreset(sc);
+ }
+
+
+ /*
+ * remember the timer value
+ */
+kick_timer:
+
+ ticks = LMC_CSR_READ (sc, csr_gp_timer);
+ LMC_CSR_WRITE (sc, csr_gp_timer, 0xffffffffUL);
+ sc->ictl.ticks = 0x0000ffff - (ticks & 0x0000ffff);
+
+ /*
+ * restart this timer.
+ */
+ sc->timer.expires = jiffies + (HZ);
+ add_timer (&sc->timer);
+
+ spin_unlock_irqrestore(&sc->lmc_lock, flags);
+
+ lmc_trace(dev, "lmc_watchdog out");
+
+}
+
+static int lmc_attach(struct net_device *dev, unsigned short encoding,
+ unsigned short parity)
+{
+ if (encoding == ENCODING_NRZ && parity == PARITY_CRC16_PR1_CCITT)
+ return 0;
+ return -EINVAL;
+}
+
+static const struct net_device_ops lmc_ops = {
+ .ndo_open = lmc_open,
+ .ndo_stop = lmc_close,
+ .ndo_change_mtu = hdlc_change_mtu,
+ .ndo_start_xmit = hdlc_start_xmit,
+ .ndo_do_ioctl = lmc_ioctl,
+ .ndo_tx_timeout = lmc_driver_timeout,
+ .ndo_get_stats = lmc_get_stats,
+};
+
+static int lmc_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ lmc_softc_t *sc;
+ struct net_device *dev;
+ u16 subdevice;
+ u16 AdapModelNum;
+ int err;
+ static int cards_found;
+
+ /* lmc_trace(dev, "lmc_init_one in"); */
+
+ err = pci_enable_device(pdev);
+ if (err) {
+ printk(KERN_ERR "lmc: pci enable failed: %d\n", err);
+ return err;
+ }
+
+ err = pci_request_regions(pdev, "lmc");
+ if (err) {
+ printk(KERN_ERR "lmc: pci_request_region failed\n");
+ goto err_req_io;
+ }
+
+ /*
+ * Allocate our own device structure
+ */
+ sc = kzalloc(sizeof(lmc_softc_t), GFP_KERNEL);
+ if (!sc) {
+ err = -ENOMEM;
+ goto err_kzalloc;
+ }
+
+ dev = alloc_hdlcdev(sc);
+ if (!dev) {
+ printk(KERN_ERR "lmc:alloc_netdev for device failed\n");
+ err = -ENOMEM;
+ goto err_hdlcdev;
+ }
+
+
+ dev->type = ARPHRD_HDLC;
+ dev_to_hdlc(dev)->xmit = lmc_start_xmit;
+ dev_to_hdlc(dev)->attach = lmc_attach;
+ dev->netdev_ops = &lmc_ops;
+ dev->watchdog_timeo = HZ; /* 1 second */
+ dev->tx_queue_len = 100;
+ sc->lmc_device = dev;
+ sc->name = dev->name;
+ sc->if_type = LMC_PPP;
+ sc->check = 0xBEAFCAFE;
+ dev->base_addr = pci_resource_start(pdev, 0);
+ dev->irq = pdev->irq;
+ pci_set_drvdata(pdev, dev);
+ SET_NETDEV_DEV(dev, &pdev->dev);
+
+ /*
+ * This will get the protocol layer ready and do any 1 time init's
+ * Must have a valid sc and dev structure
+ */
+ lmc_proto_attach(sc);
+
+ /* Init the spin lock so can call it latter */
+
+ spin_lock_init(&sc->lmc_lock);
+ pci_set_master(pdev);
+
+ printk(KERN_INFO "%s: detected at %lx, irq %d\n", dev->name,
+ dev->base_addr, dev->irq);
+
+ err = register_hdlc_device(dev);
+ if (err) {
+ printk(KERN_ERR "%s: register_netdev failed.\n", dev->name);
+ free_netdev(dev);
+ goto err_hdlcdev;
+ }
+
+ sc->lmc_cardtype = LMC_CARDTYPE_UNKNOWN;
+ sc->lmc_timing = LMC_CTL_CLOCK_SOURCE_EXT;
+
+ /*
+ *
+ * Check either the subvendor or the subdevice, some systems reverse
+ * the setting in the bois, seems to be version and arch dependent?
+ * Fix the error, exchange the two values
+ */
+ if ((subdevice = pdev->subsystem_device) == PCI_VENDOR_ID_LMC)
+ subdevice = pdev->subsystem_vendor;
+
+ switch (subdevice) {
+ case PCI_DEVICE_ID_LMC_HSSI:
+ printk(KERN_INFO "%s: LMC HSSI\n", dev->name);
+ sc->lmc_cardtype = LMC_CARDTYPE_HSSI;
+ sc->lmc_media = &lmc_hssi_media;
+ break;
+ case PCI_DEVICE_ID_LMC_DS3:
+ printk(KERN_INFO "%s: LMC DS3\n", dev->name);
+ sc->lmc_cardtype = LMC_CARDTYPE_DS3;
+ sc->lmc_media = &lmc_ds3_media;
+ break;
+ case PCI_DEVICE_ID_LMC_SSI:
+ printk(KERN_INFO "%s: LMC SSI\n", dev->name);
+ sc->lmc_cardtype = LMC_CARDTYPE_SSI;
+ sc->lmc_media = &lmc_ssi_media;
+ break;
+ case PCI_DEVICE_ID_LMC_T1:
+ printk(KERN_INFO "%s: LMC T1\n", dev->name);
+ sc->lmc_cardtype = LMC_CARDTYPE_T1;
+ sc->lmc_media = &lmc_t1_media;
+ break;
+ default:
+ printk(KERN_WARNING "%s: LMC UNKNOWN CARD!\n", dev->name);
+ break;
+ }
+
+ lmc_initcsrs (sc, dev->base_addr, 8);
+
+ lmc_gpio_mkinput (sc, 0xff);
+ sc->lmc_gpio = 0; /* drive no signals yet */
+
+ sc->lmc_media->defaults (sc);
+
+ sc->lmc_media->set_link_status (sc, LMC_LINK_UP);
+
+ /* verify that the PCI Sub System ID matches the Adapter Model number
+ * from the MII register
+ */
+ AdapModelNum = (lmc_mii_readreg (sc, 0, 3) & 0x3f0) >> 4;
+
+ if ((AdapModelNum != LMC_ADAP_T1 || /* detect LMC1200 */
+ subdevice != PCI_DEVICE_ID_LMC_T1) &&
+ (AdapModelNum != LMC_ADAP_SSI || /* detect LMC1000 */
+ subdevice != PCI_DEVICE_ID_LMC_SSI) &&
+ (AdapModelNum != LMC_ADAP_DS3 || /* detect LMC5245 */
+ subdevice != PCI_DEVICE_ID_LMC_DS3) &&
+ (AdapModelNum != LMC_ADAP_HSSI || /* detect LMC5200 */
+ subdevice != PCI_DEVICE_ID_LMC_HSSI))
+ printk(KERN_WARNING "%s: Model number (%d) miscompare for PCI"
+ " Subsystem ID = 0x%04x\n",
+ dev->name, AdapModelNum, subdevice);
+
+ /*
+ * reset clock
+ */
+ LMC_CSR_WRITE (sc, csr_gp_timer, 0xFFFFFFFFUL);
+
+ sc->board_idx = cards_found++;
+ sc->extra_stats.check = STATCHECK;
+ sc->extra_stats.version_size = (DRIVER_VERSION << 16) +
+ sizeof(sc->lmc_device->stats) + sizeof(sc->extra_stats);
+ sc->extra_stats.lmc_cardtype = sc->lmc_cardtype;
+
+ sc->lmc_ok = 0;
+ sc->last_link_status = 0;
+
+ lmc_trace(dev, "lmc_init_one out");
+ return 0;
+
+err_hdlcdev:
+ kfree(sc);
+err_kzalloc:
+ pci_release_regions(pdev);
+err_req_io:
+ pci_disable_device(pdev);
+ return err;
+}
+
+/*
+ * Called from pci when removing module.
+ */
+static void lmc_remove_one(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+
+ if (dev) {
+ printk(KERN_DEBUG "%s: removing...\n", dev->name);
+ unregister_hdlc_device(dev);
+ free_netdev(dev);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ }
+}
+
+/* After this is called, packets can be sent.
+ * Does not initialize the addresses
+ */
+static int lmc_open(struct net_device *dev)
+{
+ lmc_softc_t *sc = dev_to_sc(dev);
+ int err;
+
+ lmc_trace(dev, "lmc_open in");
+
+ lmc_led_on(sc, LMC_DS3_LED0);
+
+ lmc_dec_reset(sc);
+ lmc_reset(sc);
+
+ LMC_EVENT_LOG(LMC_EVENT_RESET1, LMC_CSR_READ(sc, csr_status), 0);
+ LMC_EVENT_LOG(LMC_EVENT_RESET2, lmc_mii_readreg(sc, 0, 16),
+ lmc_mii_readreg(sc, 0, 17));
+
+ if (sc->lmc_ok){
+ lmc_trace(dev, "lmc_open lmc_ok out");
+ return 0;
+ }
+
+ lmc_softreset (sc);
+
+ /* Since we have to use PCI bus, this should work on x86,alpha,ppc */
+ if (request_irq (dev->irq, lmc_interrupt, IRQF_SHARED, dev->name, dev)){
+ printk(KERN_WARNING "%s: could not get irq: %d\n", dev->name, dev->irq);
+ lmc_trace(dev, "lmc_open irq failed out");
+ return -EAGAIN;
+ }
+ sc->got_irq = 1;
+
+ /* Assert Terminal Active */
+ sc->lmc_miireg16 |= LMC_MII16_LED_ALL;
+ sc->lmc_media->set_link_status (sc, LMC_LINK_UP);
+
+ /*
+ * reset to last state.
+ */
+ sc->lmc_media->set_status (sc, NULL);
+
+ /* setup default bits to be used in tulip_desc_t transmit descriptor
+ * -baz */
+ sc->TxDescriptControlInit = (
+ LMC_TDES_INTERRUPT_ON_COMPLETION
+ | LMC_TDES_FIRST_SEGMENT
+ | LMC_TDES_LAST_SEGMENT
+ | LMC_TDES_SECOND_ADDR_CHAINED
+ | LMC_TDES_DISABLE_PADDING
+ );
+
+ if (sc->ictl.crc_length == LMC_CTL_CRC_LENGTH_16) {
+ /* disable 32 bit CRC generated by ASIC */
+ sc->TxDescriptControlInit |= LMC_TDES_ADD_CRC_DISABLE;
+ }
+ sc->lmc_media->set_crc_length(sc, sc->ictl.crc_length);
+ /* Acknoledge the Terminal Active and light LEDs */
+
+ /* dev->flags |= IFF_UP; */
+
+ if ((err = lmc_proto_open(sc)) != 0)
+ return err;
+
+ netif_start_queue(dev);
+ sc->extra_stats.tx_tbusy0++;
+
+ /*
+ * select what interrupts we want to get
+ */
+ sc->lmc_intrmask = 0;
+ /* Should be using the default interrupt mask defined in the .h file. */
+ sc->lmc_intrmask |= (TULIP_STS_NORMALINTR
+ | TULIP_STS_RXINTR
+ | TULIP_STS_TXINTR
+ | TULIP_STS_ABNRMLINTR
+ | TULIP_STS_SYSERROR
+ | TULIP_STS_TXSTOPPED
+ | TULIP_STS_TXUNDERFLOW
+ | TULIP_STS_RXSTOPPED
+ | TULIP_STS_RXNOBUF
+ );
+ LMC_CSR_WRITE (sc, csr_intr, sc->lmc_intrmask);
+
+ sc->lmc_cmdmode |= TULIP_CMD_TXRUN;
+ sc->lmc_cmdmode |= TULIP_CMD_RXRUN;
+ LMC_CSR_WRITE (sc, csr_command, sc->lmc_cmdmode);
+
+ sc->lmc_ok = 1; /* Run watchdog */
+
+ /*
+ * Set the if up now - pfb
+ */
+
+ sc->last_link_status = 1;
+
+ /*
+ * Setup a timer for the watchdog on probe, and start it running.
+ * Since lmc_ok == 0, it will be a NOP for now.
+ */
+ init_timer (&sc->timer);
+ sc->timer.expires = jiffies + HZ;
+ sc->timer.data = (unsigned long) dev;
+ sc->timer.function = lmc_watchdog;
+ add_timer (&sc->timer);
+
+ lmc_trace(dev, "lmc_open out");
+
+ return 0;
+}
+
+/* Total reset to compensate for the AdTran DSU doing bad things
+ * under heavy load
+ */
+
+static void lmc_running_reset (struct net_device *dev) /*fold00*/
+{
+ lmc_softc_t *sc = dev_to_sc(dev);
+
+ lmc_trace(dev, "lmc_running_reset in");
+
+ /* stop interrupts */
+ /* Clear the interrupt mask */
+ LMC_CSR_WRITE (sc, csr_intr, 0x00000000);
+
+ lmc_dec_reset (sc);
+ lmc_reset (sc);
+ lmc_softreset (sc);
+ /* sc->lmc_miireg16 |= LMC_MII16_LED_ALL; */
+ sc->lmc_media->set_link_status (sc, 1);
+ sc->lmc_media->set_status (sc, NULL);
+
+ netif_wake_queue(dev);
+
+ sc->lmc_txfull = 0;
+ sc->extra_stats.tx_tbusy0++;
+
+ sc->lmc_intrmask = TULIP_DEFAULT_INTR_MASK;
+ LMC_CSR_WRITE (sc, csr_intr, sc->lmc_intrmask);
+
+ sc->lmc_cmdmode |= (TULIP_CMD_TXRUN | TULIP_CMD_RXRUN);
+ LMC_CSR_WRITE (sc, csr_command, sc->lmc_cmdmode);
+
+ lmc_trace(dev, "lmc_runnin_reset_out");
+}
+
+
+/* This is what is called when you ifconfig down a device.
+ * This disables the timer for the watchdog and keepalives,
+ * and disables the irq for dev.
+ */
+static int lmc_close(struct net_device *dev)
+{
+ /* not calling release_region() as we should */
+ lmc_softc_t *sc = dev_to_sc(dev);
+
+ lmc_trace(dev, "lmc_close in");
+
+ sc->lmc_ok = 0;
+ sc->lmc_media->set_link_status (sc, 0);
+ del_timer (&sc->timer);
+ lmc_proto_close(sc);
+ lmc_ifdown (dev);
+
+ lmc_trace(dev, "lmc_close out");
+
+ return 0;
+}
+
+/* Ends the transfer of packets */
+/* When the interface goes down, this is called */
+static int lmc_ifdown (struct net_device *dev) /*fold00*/
+{
+ lmc_softc_t *sc = dev_to_sc(dev);
+ u32 csr6;
+ int i;
+
+ lmc_trace(dev, "lmc_ifdown in");
+
+ /* Don't let anything else go on right now */
+ // dev->start = 0;
+ netif_stop_queue(dev);
+ sc->extra_stats.tx_tbusy1++;
+
+ /* stop interrupts */
+ /* Clear the interrupt mask */
+ LMC_CSR_WRITE (sc, csr_intr, 0x00000000);
+
+ /* Stop Tx and Rx on the chip */
+ csr6 = LMC_CSR_READ (sc, csr_command);
+ csr6 &= ~LMC_DEC_ST; /* Turn off the Transmission bit */
+ csr6 &= ~LMC_DEC_SR; /* Turn off the Receive bit */
+ LMC_CSR_WRITE (sc, csr_command, csr6);
+
+ sc->lmc_device->stats.rx_missed_errors +=
+ LMC_CSR_READ(sc, csr_missed_frames) & 0xffff;
+
+ /* release the interrupt */
+ if(sc->got_irq == 1){
+ free_irq (dev->irq, dev);
+ sc->got_irq = 0;
+ }
+
+ /* free skbuffs in the Rx queue */
+ for (i = 0; i < LMC_RXDESCS; i++)
+ {
+ struct sk_buff *skb = sc->lmc_rxq[i];
+ sc->lmc_rxq[i] = NULL;
+ sc->lmc_rxring[i].status = 0;
+ sc->lmc_rxring[i].length = 0;
+ sc->lmc_rxring[i].buffer1 = 0xDEADBEEF;
+ if (skb != NULL)
+ dev_kfree_skb(skb);
+ sc->lmc_rxq[i] = NULL;
+ }
+
+ for (i = 0; i < LMC_TXDESCS; i++)
+ {
+ if (sc->lmc_txq[i] != NULL)
+ dev_kfree_skb(sc->lmc_txq[i]);
+ sc->lmc_txq[i] = NULL;
+ }
+
+ lmc_led_off (sc, LMC_MII16_LED_ALL);
+
+ netif_wake_queue(dev);
+ sc->extra_stats.tx_tbusy0++;
+
+ lmc_trace(dev, "lmc_ifdown out");
+
+ return 0;
+}
+
+/* Interrupt handling routine. This will take an incoming packet, or clean
+ * up after a trasmit.
+ */
+static irqreturn_t lmc_interrupt (int irq, void *dev_instance) /*fold00*/
+{
+ struct net_device *dev = (struct net_device *) dev_instance;
+ lmc_softc_t *sc = dev_to_sc(dev);
+ u32 csr;
+ int i;
+ s32 stat;
+ unsigned int badtx;
+ u32 firstcsr;
+ int max_work = LMC_RXDESCS;
+ int handled = 0;
+
+ lmc_trace(dev, "lmc_interrupt in");
+
+ spin_lock(&sc->lmc_lock);
+
+ /*
+ * Read the csr to find what interrupts we have (if any)
+ */
+ csr = LMC_CSR_READ (sc, csr_status);
+
+ /*
+ * Make sure this is our interrupt
+ */
+ if ( ! (csr & sc->lmc_intrmask)) {
+ goto lmc_int_fail_out;
+ }
+
+ firstcsr = csr;
+
+ /* always go through this loop at least once */
+ while (csr & sc->lmc_intrmask) {
+ handled = 1;
+
+ /*
+ * Clear interrupt bits, we handle all case below
+ */
+ LMC_CSR_WRITE (sc, csr_status, csr);
+
+ /*
+ * One of
+ * - Transmit process timed out CSR5<1>
+ * - Transmit jabber timeout CSR5<3>
+ * - Transmit underflow CSR5<5>
+ * - Transmit Receiver buffer unavailable CSR5<7>
+ * - Receive process stopped CSR5<8>
+ * - Receive watchdog timeout CSR5<9>
+ * - Early transmit interrupt CSR5<10>
+ *
+ * Is this really right? Should we do a running reset for jabber?
+ * (being a WAN card and all)
+ */
+ if (csr & TULIP_STS_ABNRMLINTR){
+ lmc_running_reset (dev);
+ break;
+ }
+
+ if (csr & TULIP_STS_RXINTR){
+ lmc_trace(dev, "rx interrupt");
+ lmc_rx (dev);
+
+ }
+ if (csr & (TULIP_STS_TXINTR | TULIP_STS_TXNOBUF | TULIP_STS_TXSTOPPED)) {
+
+ int n_compl = 0 ;
+ /* reset the transmit timeout detection flag -baz */
+ sc->extra_stats.tx_NoCompleteCnt = 0;
+
+ badtx = sc->lmc_taint_tx;
+ i = badtx % LMC_TXDESCS;
+
+ while ((badtx < sc->lmc_next_tx)) {
+ stat = sc->lmc_txring[i].status;
+
+ LMC_EVENT_LOG (LMC_EVENT_XMTINT, stat,
+ sc->lmc_txring[i].length);
+ /*
+ * If bit 31 is 1 the tulip owns it break out of the loop
+ */
+ if (stat & 0x80000000)
+ break;
+
+ n_compl++ ; /* i.e., have an empty slot in ring */
+ /*
+ * If we have no skbuff or have cleared it
+ * Already continue to the next buffer
+ */
+ if (sc->lmc_txq[i] == NULL)
+ continue;
+
+ /*
+ * Check the total error summary to look for any errors
+ */
+ if (stat & 0x8000) {
+ sc->lmc_device->stats.tx_errors++;
+ if (stat & 0x4104)
+ sc->lmc_device->stats.tx_aborted_errors++;
+ if (stat & 0x0C00)
+ sc->lmc_device->stats.tx_carrier_errors++;
+ if (stat & 0x0200)
+ sc->lmc_device->stats.tx_window_errors++;
+ if (stat & 0x0002)
+ sc->lmc_device->stats.tx_fifo_errors++;
+ } else {
+ sc->lmc_device->stats.tx_bytes += sc->lmc_txring[i].length & 0x7ff;
+
+ sc->lmc_device->stats.tx_packets++;
+ }
+
+ // dev_kfree_skb(sc->lmc_txq[i]);
+ dev_kfree_skb_irq(sc->lmc_txq[i]);
+ sc->lmc_txq[i] = NULL;
+
+ badtx++;
+ i = badtx % LMC_TXDESCS;
+ }
+
+ if (sc->lmc_next_tx - badtx > LMC_TXDESCS)
+ {
+ printk ("%s: out of sync pointer\n", dev->name);
+ badtx += LMC_TXDESCS;
+ }
+ LMC_EVENT_LOG(LMC_EVENT_TBUSY0, n_compl, 0);
+ sc->lmc_txfull = 0;
+ netif_wake_queue(dev);
+ sc->extra_stats.tx_tbusy0++;
+
+
+#ifdef DEBUG
+ sc->extra_stats.dirtyTx = badtx;
+ sc->extra_stats.lmc_next_tx = sc->lmc_next_tx;
+ sc->extra_stats.lmc_txfull = sc->lmc_txfull;
+#endif
+ sc->lmc_taint_tx = badtx;
+
+ /*
+ * Why was there a break here???
+ */
+ } /* end handle transmit interrupt */
+
+ if (csr & TULIP_STS_SYSERROR) {
+ u32 error;
+ printk (KERN_WARNING "%s: system bus error csr: %#8.8x\n", dev->name, csr);
+ error = csr>>23 & 0x7;
+ switch(error){
+ case 0x000:
+ printk(KERN_WARNING "%s: Parity Fault (bad)\n", dev->name);
+ break;
+ case 0x001:
+ printk(KERN_WARNING "%s: Master Abort (naughty)\n", dev->name);
+ break;
+ case 0x010:
+ printk(KERN_WARNING "%s: Target Abort (not so naughty)\n", dev->name);
+ break;
+ default:
+ printk(KERN_WARNING "%s: This bus error code was supposed to be reserved!\n", dev->name);
+ }
+ lmc_dec_reset (sc);
+ lmc_reset (sc);
+ LMC_EVENT_LOG(LMC_EVENT_RESET1, LMC_CSR_READ (sc, csr_status), 0);
+ LMC_EVENT_LOG(LMC_EVENT_RESET2,
+ lmc_mii_readreg (sc, 0, 16),
+ lmc_mii_readreg (sc, 0, 17));
+
+ }
+
+
+ if(max_work-- <= 0)
+ break;
+
+ /*
+ * Get current csr status to make sure
+ * we've cleared all interrupts
+ */
+ csr = LMC_CSR_READ (sc, csr_status);
+ } /* end interrupt loop */
+ LMC_EVENT_LOG(LMC_EVENT_INT, firstcsr, csr);
+
+lmc_int_fail_out:
+
+ spin_unlock(&sc->lmc_lock);
+
+ lmc_trace(dev, "lmc_interrupt out");
+ return IRQ_RETVAL(handled);
+}
+
+static netdev_tx_t lmc_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
+{
+ lmc_softc_t *sc = dev_to_sc(dev);
+ u32 flag;
+ int entry;
+ unsigned long flags;
+
+ lmc_trace(dev, "lmc_start_xmit in");
+
+ spin_lock_irqsave(&sc->lmc_lock, flags);
+
+ /* normal path, tbusy known to be zero */
+
+ entry = sc->lmc_next_tx % LMC_TXDESCS;
+
+ sc->lmc_txq[entry] = skb;
+ sc->lmc_txring[entry].buffer1 = virt_to_bus (skb->data);
+
+ LMC_CONSOLE_LOG("xmit", skb->data, skb->len);
+
+#ifndef GCOM
+ /* If the queue is less than half full, don't interrupt */
+ if (sc->lmc_next_tx - sc->lmc_taint_tx < LMC_TXDESCS / 2)
+ {
+ /* Do not interrupt on completion of this packet */
+ flag = 0x60000000;
+ netif_wake_queue(dev);
+ }
+ else if (sc->lmc_next_tx - sc->lmc_taint_tx == LMC_TXDESCS / 2)
+ {
+ /* This generates an interrupt on completion of this packet */
+ flag = 0xe0000000;
+ netif_wake_queue(dev);
+ }
+ else if (sc->lmc_next_tx - sc->lmc_taint_tx < LMC_TXDESCS - 1)
+ {
+ /* Do not interrupt on completion of this packet */
+ flag = 0x60000000;
+ netif_wake_queue(dev);
+ }
+ else
+ {
+ /* This generates an interrupt on completion of this packet */
+ flag = 0xe0000000;
+ sc->lmc_txfull = 1;
+ netif_stop_queue(dev);
+ }
+#else
+ flag = LMC_TDES_INTERRUPT_ON_COMPLETION;
+
+ if (sc->lmc_next_tx - sc->lmc_taint_tx >= LMC_TXDESCS - 1)
+ { /* ring full, go busy */
+ sc->lmc_txfull = 1;
+ netif_stop_queue(dev);
+ sc->extra_stats.tx_tbusy1++;
+ LMC_EVENT_LOG(LMC_EVENT_TBUSY1, entry, 0);
+ }
+#endif
+
+
+ if (entry == LMC_TXDESCS - 1) /* last descriptor in ring */
+ flag |= LMC_TDES_END_OF_RING; /* flag as such for Tulip */
+
+ /* don't pad small packets either */
+ flag = sc->lmc_txring[entry].length = (skb->len) | flag |
+ sc->TxDescriptControlInit;
+
+ /* set the transmit timeout flag to be checked in
+ * the watchdog timer handler. -baz
+ */
+
+ sc->extra_stats.tx_NoCompleteCnt++;
+ sc->lmc_next_tx++;
+
+ /* give ownership to the chip */
+ LMC_EVENT_LOG(LMC_EVENT_XMT, flag, entry);
+ sc->lmc_txring[entry].status = 0x80000000;
+
+ /* send now! */
+ LMC_CSR_WRITE (sc, csr_txpoll, 0);
+
+ spin_unlock_irqrestore(&sc->lmc_lock, flags);
+
+ lmc_trace(dev, "lmc_start_xmit_out");
+ return NETDEV_TX_OK;
+}
+
+
+static int lmc_rx(struct net_device *dev)
+{
+ lmc_softc_t *sc = dev_to_sc(dev);
+ int i;
+ int rx_work_limit = LMC_RXDESCS;
+ unsigned int next_rx;
+ int rxIntLoopCnt; /* debug -baz */
+ int localLengthErrCnt = 0;
+ long stat;
+ struct sk_buff *skb, *nsb;
+ u16 len;
+
+ lmc_trace(dev, "lmc_rx in");
+
+ lmc_led_on(sc, LMC_DS3_LED3);
+
+ rxIntLoopCnt = 0; /* debug -baz */
+
+ i = sc->lmc_next_rx % LMC_RXDESCS;
+ next_rx = sc->lmc_next_rx;
+
+ while (((stat = sc->lmc_rxring[i].status) & LMC_RDES_OWN_BIT) != DESC_OWNED_BY_DC21X4)
+ {
+ rxIntLoopCnt++; /* debug -baz */
+ len = ((stat & LMC_RDES_FRAME_LENGTH) >> RDES_FRAME_LENGTH_BIT_NUMBER);
+ if ((stat & 0x0300) != 0x0300) { /* Check first segment and last segment */
+ if ((stat & 0x0000ffff) != 0x7fff) {
+ /* Oversized frame */
+ sc->lmc_device->stats.rx_length_errors++;
+ goto skip_packet;
+ }
+ }
+
+ if (stat & 0x00000008) { /* Catch a dribbling bit error */
+ sc->lmc_device->stats.rx_errors++;
+ sc->lmc_device->stats.rx_frame_errors++;
+ goto skip_packet;
+ }
+
+
+ if (stat & 0x00000004) { /* Catch a CRC error by the Xilinx */
+ sc->lmc_device->stats.rx_errors++;
+ sc->lmc_device->stats.rx_crc_errors++;
+ goto skip_packet;
+ }
+
+ if (len > LMC_PKT_BUF_SZ) {
+ sc->lmc_device->stats.rx_length_errors++;
+ localLengthErrCnt++;
+ goto skip_packet;
+ }
+
+ if (len < sc->lmc_crcSize + 2) {
+ sc->lmc_device->stats.rx_length_errors++;
+ sc->extra_stats.rx_SmallPktCnt++;
+ localLengthErrCnt++;
+ goto skip_packet;
+ }
+
+ if(stat & 0x00004000){
+ printk(KERN_WARNING "%s: Receiver descriptor error, receiver out of sync?\n", dev->name);
+ }
+
+ len -= sc->lmc_crcSize;
+
+ skb = sc->lmc_rxq[i];
+
+ /*
+ * We ran out of memory at some point
+ * just allocate an skb buff and continue.
+ */
+
+ if (!skb) {
+ nsb = dev_alloc_skb (LMC_PKT_BUF_SZ + 2);
+ if (nsb) {
+ sc->lmc_rxq[i] = nsb;
+ nsb->dev = dev;
+ sc->lmc_rxring[i].buffer1 = virt_to_bus(skb_tail_pointer(nsb));
+ }
+ sc->failed_recv_alloc = 1;
+ goto skip_packet;
+ }
+
+ sc->lmc_device->stats.rx_packets++;
+ sc->lmc_device->stats.rx_bytes += len;
+
+ LMC_CONSOLE_LOG("recv", skb->data, len);
+
+ /*
+ * I'm not sure of the sanity of this
+ * Packets could be arriving at a constant
+ * 44.210mbits/sec and we're going to copy
+ * them into a new buffer??
+ */
+
+ if(len > (LMC_MTU - (LMC_MTU>>2))){ /* len > LMC_MTU * 0.75 */
+ /*
+ * If it's a large packet don't copy it just hand it up
+ */
+ give_it_anyways:
+
+ sc->lmc_rxq[i] = NULL;
+ sc->lmc_rxring[i].buffer1 = 0x0;
+
+ skb_put (skb, len);
+ skb->protocol = lmc_proto_type(sc, skb);
+ skb_reset_mac_header(skb);
+ /* skb_reset_network_header(skb); */
+ skb->dev = dev;
+ lmc_proto_netif(sc, skb);
+
+ /*
+ * This skb will be destroyed by the upper layers, make a new one
+ */
+ nsb = dev_alloc_skb (LMC_PKT_BUF_SZ + 2);
+ if (nsb) {
+ sc->lmc_rxq[i] = nsb;
+ nsb->dev = dev;
+ sc->lmc_rxring[i].buffer1 = virt_to_bus(skb_tail_pointer(nsb));
+ /* Transferred to 21140 below */
+ }
+ else {
+ /*
+ * We've run out of memory, stop trying to allocate
+ * memory and exit the interrupt handler
+ *
+ * The chip may run out of receivers and stop
+ * in which care we'll try to allocate the buffer
+ * again. (once a second)
+ */
+ sc->extra_stats.rx_BuffAllocErr++;
+ LMC_EVENT_LOG(LMC_EVENT_RCVINT, stat, len);
+ sc->failed_recv_alloc = 1;
+ goto skip_out_of_mem;
+ }
+ }
+ else {
+ nsb = dev_alloc_skb(len);
+ if(!nsb) {
+ goto give_it_anyways;
+ }
+ skb_copy_from_linear_data(skb, skb_put(nsb, len), len);
+
+ nsb->protocol = lmc_proto_type(sc, nsb);
+ skb_reset_mac_header(nsb);
+ /* skb_reset_network_header(nsb); */
+ nsb->dev = dev;
+ lmc_proto_netif(sc, nsb);
+ }
+
+ skip_packet:
+ LMC_EVENT_LOG(LMC_EVENT_RCVINT, stat, len);
+ sc->lmc_rxring[i].status = DESC_OWNED_BY_DC21X4;
+
+ sc->lmc_next_rx++;
+ i = sc->lmc_next_rx % LMC_RXDESCS;
+ rx_work_limit--;
+ if (rx_work_limit < 0)
+ break;
+ }
+
+ /* detect condition for LMC1000 where DSU cable attaches and fills
+ * descriptors with bogus packets
+ *
+ if (localLengthErrCnt > LMC_RXDESCS - 3) {
+ sc->extra_stats.rx_BadPktSurgeCnt++;
+ LMC_EVENT_LOG(LMC_EVENT_BADPKTSURGE, localLengthErrCnt,
+ sc->extra_stats.rx_BadPktSurgeCnt);
+ } */
+
+ /* save max count of receive descriptors serviced */
+ if (rxIntLoopCnt > sc->extra_stats.rxIntLoopCnt)
+ sc->extra_stats.rxIntLoopCnt = rxIntLoopCnt; /* debug -baz */
+
+#ifdef DEBUG
+ if (rxIntLoopCnt == 0)
+ {
+ for (i = 0; i < LMC_RXDESCS; i++)
+ {
+ if ((sc->lmc_rxring[i].status & LMC_RDES_OWN_BIT)
+ != DESC_OWNED_BY_DC21X4)
+ {
+ rxIntLoopCnt++;
+ }
+ }
+ LMC_EVENT_LOG(LMC_EVENT_RCVEND, rxIntLoopCnt, 0);
+ }
+#endif
+
+
+ lmc_led_off(sc, LMC_DS3_LED3);
+
+skip_out_of_mem:
+
+ lmc_trace(dev, "lmc_rx out");
+
+ return 0;
+}
+
+static struct net_device_stats *lmc_get_stats(struct net_device *dev)
+{
+ lmc_softc_t *sc = dev_to_sc(dev);
+ unsigned long flags;
+
+ lmc_trace(dev, "lmc_get_stats in");
+
+ spin_lock_irqsave(&sc->lmc_lock, flags);
+
+ sc->lmc_device->stats.rx_missed_errors += LMC_CSR_READ(sc, csr_missed_frames) & 0xffff;
+
+ spin_unlock_irqrestore(&sc->lmc_lock, flags);
+
+ lmc_trace(dev, "lmc_get_stats out");
+
+ return &sc->lmc_device->stats;
+}
+
+static struct pci_driver lmc_driver = {
+ .name = "lmc",
+ .id_table = lmc_pci_tbl,
+ .probe = lmc_init_one,
+ .remove = lmc_remove_one,
+};
+
+module_pci_driver(lmc_driver);
+
+unsigned lmc_mii_readreg (lmc_softc_t * const sc, unsigned devaddr, unsigned regno) /*fold00*/
+{
+ int i;
+ int command = (0xf6 << 10) | (devaddr << 5) | regno;
+ int retval = 0;
+
+ lmc_trace(sc->lmc_device, "lmc_mii_readreg in");
+
+ LMC_MII_SYNC (sc);
+
+ lmc_trace(sc->lmc_device, "lmc_mii_readreg: done sync");
+
+ for (i = 15; i >= 0; i--)
+ {
+ int dataval = (command & (1 << i)) ? 0x20000 : 0;
+
+ LMC_CSR_WRITE (sc, csr_9, dataval);
+ lmc_delay ();
+ /* __SLOW_DOWN_IO; */
+ LMC_CSR_WRITE (sc, csr_9, dataval | 0x10000);
+ lmc_delay ();
+ /* __SLOW_DOWN_IO; */
+ }
+
+ lmc_trace(sc->lmc_device, "lmc_mii_readreg: done1");
+
+ for (i = 19; i > 0; i--)
+ {
+ LMC_CSR_WRITE (sc, csr_9, 0x40000);
+ lmc_delay ();
+ /* __SLOW_DOWN_IO; */
+ retval = (retval << 1) | ((LMC_CSR_READ (sc, csr_9) & 0x80000) ? 1 : 0);
+ LMC_CSR_WRITE (sc, csr_9, 0x40000 | 0x10000);
+ lmc_delay ();
+ /* __SLOW_DOWN_IO; */
+ }
+
+ lmc_trace(sc->lmc_device, "lmc_mii_readreg out");
+
+ return (retval >> 1) & 0xffff;
+}
+
+void lmc_mii_writereg (lmc_softc_t * const sc, unsigned devaddr, unsigned regno, unsigned data) /*fold00*/
+{
+ int i = 32;
+ int command = (0x5002 << 16) | (devaddr << 23) | (regno << 18) | data;
+
+ lmc_trace(sc->lmc_device, "lmc_mii_writereg in");
+
+ LMC_MII_SYNC (sc);
+
+ i = 31;
+ while (i >= 0)
+ {
+ int datav;
+
+ if (command & (1 << i))
+ datav = 0x20000;
+ else
+ datav = 0x00000;
+
+ LMC_CSR_WRITE (sc, csr_9, datav);
+ lmc_delay ();
+ /* __SLOW_DOWN_IO; */
+ LMC_CSR_WRITE (sc, csr_9, (datav | 0x10000));
+ lmc_delay ();
+ /* __SLOW_DOWN_IO; */
+ i--;
+ }
+
+ i = 2;
+ while (i > 0)
+ {
+ LMC_CSR_WRITE (sc, csr_9, 0x40000);
+ lmc_delay ();
+ /* __SLOW_DOWN_IO; */
+ LMC_CSR_WRITE (sc, csr_9, 0x50000);
+ lmc_delay ();
+ /* __SLOW_DOWN_IO; */
+ i--;
+ }
+
+ lmc_trace(sc->lmc_device, "lmc_mii_writereg out");
+}
+
+static void lmc_softreset (lmc_softc_t * const sc) /*fold00*/
+{
+ int i;
+
+ lmc_trace(sc->lmc_device, "lmc_softreset in");
+
+ /* Initialize the receive rings and buffers. */
+ sc->lmc_txfull = 0;
+ sc->lmc_next_rx = 0;
+ sc->lmc_next_tx = 0;
+ sc->lmc_taint_rx = 0;
+ sc->lmc_taint_tx = 0;
+
+ /*
+ * Setup each one of the receiver buffers
+ * allocate an skbuff for each one, setup the descriptor table
+ * and point each buffer at the next one
+ */
+
+ for (i = 0; i < LMC_RXDESCS; i++)
+ {
+ struct sk_buff *skb;
+
+ if (sc->lmc_rxq[i] == NULL)
+ {
+ skb = dev_alloc_skb (LMC_PKT_BUF_SZ + 2);
+ if(skb == NULL){
+ printk(KERN_WARNING "%s: Failed to allocate receiver ring, will try again\n", sc->name);
+ sc->failed_ring = 1;
+ break;
+ }
+ else{
+ sc->lmc_rxq[i] = skb;
+ }
+ }
+ else
+ {
+ skb = sc->lmc_rxq[i];
+ }
+
+ skb->dev = sc->lmc_device;
+
+ /* owned by 21140 */
+ sc->lmc_rxring[i].status = 0x80000000;
+
+ /* used to be PKT_BUF_SZ now uses skb since we lose some to head room */
+ sc->lmc_rxring[i].length = skb_tailroom(skb);
+
+ /* use to be tail which is dumb since you're thinking why write
+ * to the end of the packj,et but since there's nothing there tail == data
+ */
+ sc->lmc_rxring[i].buffer1 = virt_to_bus (skb->data);
+
+ /* This is fair since the structure is static and we have the next address */
+ sc->lmc_rxring[i].buffer2 = virt_to_bus (&sc->lmc_rxring[i + 1]);
+
+ }
+
+ /*
+ * Sets end of ring
+ */
+ if (i != 0) {
+ sc->lmc_rxring[i - 1].length |= 0x02000000; /* Set end of buffers flag */
+ sc->lmc_rxring[i - 1].buffer2 = virt_to_bus(&sc->lmc_rxring[0]); /* Point back to the start */
+ }
+ LMC_CSR_WRITE (sc, csr_rxlist, virt_to_bus (sc->lmc_rxring)); /* write base address */
+
+ /* Initialize the transmit rings and buffers */
+ for (i = 0; i < LMC_TXDESCS; i++)
+ {
+ if (sc->lmc_txq[i] != NULL){ /* have buffer */
+ dev_kfree_skb(sc->lmc_txq[i]); /* free it */
+ sc->lmc_device->stats.tx_dropped++; /* We just dropped a packet */
+ }
+ sc->lmc_txq[i] = NULL;
+ sc->lmc_txring[i].status = 0x00000000;
+ sc->lmc_txring[i].buffer2 = virt_to_bus (&sc->lmc_txring[i + 1]);
+ }
+ sc->lmc_txring[i - 1].buffer2 = virt_to_bus (&sc->lmc_txring[0]);
+ LMC_CSR_WRITE (sc, csr_txlist, virt_to_bus (sc->lmc_txring));
+
+ lmc_trace(sc->lmc_device, "lmc_softreset out");
+}
+
+void lmc_gpio_mkinput(lmc_softc_t * const sc, u32 bits) /*fold00*/
+{
+ lmc_trace(sc->lmc_device, "lmc_gpio_mkinput in");
+ sc->lmc_gpio_io &= ~bits;
+ LMC_CSR_WRITE(sc, csr_gp, TULIP_GP_PINSET | (sc->lmc_gpio_io));
+ lmc_trace(sc->lmc_device, "lmc_gpio_mkinput out");
+}
+
+void lmc_gpio_mkoutput(lmc_softc_t * const sc, u32 bits) /*fold00*/
+{
+ lmc_trace(sc->lmc_device, "lmc_gpio_mkoutput in");
+ sc->lmc_gpio_io |= bits;
+ LMC_CSR_WRITE(sc, csr_gp, TULIP_GP_PINSET | (sc->lmc_gpio_io));
+ lmc_trace(sc->lmc_device, "lmc_gpio_mkoutput out");
+}
+
+void lmc_led_on(lmc_softc_t * const sc, u32 led) /*fold00*/
+{
+ lmc_trace(sc->lmc_device, "lmc_led_on in");
+ if((~sc->lmc_miireg16) & led){ /* Already on! */
+ lmc_trace(sc->lmc_device, "lmc_led_on aon out");
+ return;
+ }
+
+ sc->lmc_miireg16 &= ~led;
+ lmc_mii_writereg(sc, 0, 16, sc->lmc_miireg16);
+ lmc_trace(sc->lmc_device, "lmc_led_on out");
+}
+
+void lmc_led_off(lmc_softc_t * const sc, u32 led) /*fold00*/
+{
+ lmc_trace(sc->lmc_device, "lmc_led_off in");
+ if(sc->lmc_miireg16 & led){ /* Already set don't do anything */
+ lmc_trace(sc->lmc_device, "lmc_led_off aoff out");
+ return;
+ }
+
+ sc->lmc_miireg16 |= led;
+ lmc_mii_writereg(sc, 0, 16, sc->lmc_miireg16);
+ lmc_trace(sc->lmc_device, "lmc_led_off out");
+}
+
+static void lmc_reset(lmc_softc_t * const sc) /*fold00*/
+{
+ lmc_trace(sc->lmc_device, "lmc_reset in");
+ sc->lmc_miireg16 |= LMC_MII16_FIFO_RESET;
+ lmc_mii_writereg(sc, 0, 16, sc->lmc_miireg16);
+
+ sc->lmc_miireg16 &= ~LMC_MII16_FIFO_RESET;
+ lmc_mii_writereg(sc, 0, 16, sc->lmc_miireg16);
+
+ /*
+ * make some of the GPIO pins be outputs
+ */
+ lmc_gpio_mkoutput(sc, LMC_GEP_RESET);
+
+ /*
+ * RESET low to force state reset. This also forces
+ * the transmitter clock to be internal, but we expect to reset
+ * that later anyway.
+ */
+ sc->lmc_gpio &= ~(LMC_GEP_RESET);
+ LMC_CSR_WRITE(sc, csr_gp, sc->lmc_gpio);
+
+ /*
+ * hold for more than 10 microseconds
+ */
+ udelay(50);
+
+ /*
+ * stop driving Xilinx-related signals
+ */
+ lmc_gpio_mkinput(sc, LMC_GEP_RESET);
+
+ /*
+ * Call media specific init routine
+ */
+ sc->lmc_media->init(sc);
+
+ sc->extra_stats.resetCount++;
+ lmc_trace(sc->lmc_device, "lmc_reset out");
+}
+
+static void lmc_dec_reset(lmc_softc_t * const sc) /*fold00*/
+{
+ u32 val;
+ lmc_trace(sc->lmc_device, "lmc_dec_reset in");
+
+ /*
+ * disable all interrupts
+ */
+ sc->lmc_intrmask = 0;
+ LMC_CSR_WRITE(sc, csr_intr, sc->lmc_intrmask);
+
+ /*
+ * Reset the chip with a software reset command.
+ * Wait 10 microseconds (actually 50 PCI cycles but at
+ * 33MHz that comes to two microseconds but wait a
+ * bit longer anyways)
+ */
+ LMC_CSR_WRITE(sc, csr_busmode, TULIP_BUSMODE_SWRESET);
+ udelay(25);
+#ifdef __sparc__
+ sc->lmc_busmode = LMC_CSR_READ(sc, csr_busmode);
+ sc->lmc_busmode = 0x00100000;
+ sc->lmc_busmode &= ~TULIP_BUSMODE_SWRESET;
+ LMC_CSR_WRITE(sc, csr_busmode, sc->lmc_busmode);
+#endif
+ sc->lmc_cmdmode = LMC_CSR_READ(sc, csr_command);
+
+ /*
+ * We want:
+ * no ethernet address in frames we write
+ * disable padding (txdesc, padding disable)
+ * ignore runt frames (rdes0 bit 15)
+ * no receiver watchdog or transmitter jabber timer
+ * (csr15 bit 0,14 == 1)
+ * if using 16-bit CRC, turn off CRC (trans desc, crc disable)
+ */
+
+ sc->lmc_cmdmode |= ( TULIP_CMD_PROMISCUOUS
+ | TULIP_CMD_FULLDUPLEX
+ | TULIP_CMD_PASSBADPKT
+ | TULIP_CMD_NOHEARTBEAT
+ | TULIP_CMD_PORTSELECT
+ | TULIP_CMD_RECEIVEALL
+ | TULIP_CMD_MUSTBEONE
+ );
+ sc->lmc_cmdmode &= ~( TULIP_CMD_OPERMODE
+ | TULIP_CMD_THRESHOLDCTL
+ | TULIP_CMD_STOREFWD
+ | TULIP_CMD_TXTHRSHLDCTL
+ );
+
+ LMC_CSR_WRITE(sc, csr_command, sc->lmc_cmdmode);
+
+ /*
+ * disable receiver watchdog and transmit jabber
+ */
+ val = LMC_CSR_READ(sc, csr_sia_general);
+ val |= (TULIP_WATCHDOG_TXDISABLE | TULIP_WATCHDOG_RXDISABLE);
+ LMC_CSR_WRITE(sc, csr_sia_general, val);
+
+ lmc_trace(sc->lmc_device, "lmc_dec_reset out");
+}
+
+static void lmc_initcsrs(lmc_softc_t * const sc, lmc_csrptr_t csr_base, /*fold00*/
+ size_t csr_size)
+{
+ lmc_trace(sc->lmc_device, "lmc_initcsrs in");
+ sc->lmc_csrs.csr_busmode = csr_base + 0 * csr_size;
+ sc->lmc_csrs.csr_txpoll = csr_base + 1 * csr_size;
+ sc->lmc_csrs.csr_rxpoll = csr_base + 2 * csr_size;
+ sc->lmc_csrs.csr_rxlist = csr_base + 3 * csr_size;
+ sc->lmc_csrs.csr_txlist = csr_base + 4 * csr_size;
+ sc->lmc_csrs.csr_status = csr_base + 5 * csr_size;
+ sc->lmc_csrs.csr_command = csr_base + 6 * csr_size;
+ sc->lmc_csrs.csr_intr = csr_base + 7 * csr_size;
+ sc->lmc_csrs.csr_missed_frames = csr_base + 8 * csr_size;
+ sc->lmc_csrs.csr_9 = csr_base + 9 * csr_size;
+ sc->lmc_csrs.csr_10 = csr_base + 10 * csr_size;
+ sc->lmc_csrs.csr_11 = csr_base + 11 * csr_size;
+ sc->lmc_csrs.csr_12 = csr_base + 12 * csr_size;
+ sc->lmc_csrs.csr_13 = csr_base + 13 * csr_size;
+ sc->lmc_csrs.csr_14 = csr_base + 14 * csr_size;
+ sc->lmc_csrs.csr_15 = csr_base + 15 * csr_size;
+ lmc_trace(sc->lmc_device, "lmc_initcsrs out");
+}
+
+static void lmc_driver_timeout(struct net_device *dev)
+{
+ lmc_softc_t *sc = dev_to_sc(dev);
+ u32 csr6;
+ unsigned long flags;
+
+ lmc_trace(dev, "lmc_driver_timeout in");
+
+ spin_lock_irqsave(&sc->lmc_lock, flags);
+
+ printk("%s: Xmitter busy|\n", dev->name);
+
+ sc->extra_stats.tx_tbusy_calls++;
+ if (jiffies - dev_trans_start(dev) < TX_TIMEOUT)
+ goto bug_out;
+
+ /*
+ * Chip seems to have locked up
+ * Reset it
+ * This whips out all our decriptor
+ * table and starts from scartch
+ */
+
+ LMC_EVENT_LOG(LMC_EVENT_XMTPRCTMO,
+ LMC_CSR_READ (sc, csr_status),
+ sc->extra_stats.tx_ProcTimeout);
+
+ lmc_running_reset (dev);
+
+ LMC_EVENT_LOG(LMC_EVENT_RESET1, LMC_CSR_READ (sc, csr_status), 0);
+ LMC_EVENT_LOG(LMC_EVENT_RESET2,
+ lmc_mii_readreg (sc, 0, 16),
+ lmc_mii_readreg (sc, 0, 17));
+
+ /* restart the tx processes */
+ csr6 = LMC_CSR_READ (sc, csr_command);
+ LMC_CSR_WRITE (sc, csr_command, csr6 | 0x0002);
+ LMC_CSR_WRITE (sc, csr_command, csr6 | 0x2002);
+
+ /* immediate transmit */
+ LMC_CSR_WRITE (sc, csr_txpoll, 0);
+
+ sc->lmc_device->stats.tx_errors++;
+ sc->extra_stats.tx_ProcTimeout++; /* -baz */
+
+ dev->trans_start = jiffies; /* prevent tx timeout */
+
+bug_out:
+
+ spin_unlock_irqrestore(&sc->lmc_lock, flags);
+
+ lmc_trace(dev, "lmc_driver_timeout out");
+
+
+}