diff options
Diffstat (limited to 'kernel/drivers/net/wan/hd64570.h')
| -rw-r--r-- | kernel/drivers/net/wan/hd64570.h | 241 |
1 files changed, 241 insertions, 0 deletions
diff --git a/kernel/drivers/net/wan/hd64570.h b/kernel/drivers/net/wan/hd64570.h new file mode 100644 index 000000000..10963e8f4 --- /dev/null +++ b/kernel/drivers/net/wan/hd64570.h @@ -0,0 +1,241 @@ +#ifndef __HD64570_H +#define __HD64570_H + +/* SCA HD64570 register definitions - all addresses for mode 0 (8086 MPU) + and 1 (64180 MPU). For modes 2 and 3, XOR the address with 0x01. + + Source: HD64570 SCA User's Manual +*/ + + + +/* SCA Control Registers */ +#define LPR 0x00 /* Low Power */ + +/* Wait controller registers */ +#define PABR0 0x02 /* Physical Address Boundary 0 */ +#define PABR1 0x03 /* Physical Address Boundary 1 */ +#define WCRL 0x04 /* Wait Control L */ +#define WCRM 0x05 /* Wait Control M */ +#define WCRH 0x06 /* Wait Control H */ + +#define PCR 0x08 /* DMA Priority Control */ +#define DMER 0x09 /* DMA Master Enable */ + + +/* Interrupt registers */ +#define ISR0 0x10 /* Interrupt Status 0 */ +#define ISR1 0x11 /* Interrupt Status 1 */ +#define ISR2 0x12 /* Interrupt Status 2 */ + +#define IER0 0x14 /* Interrupt Enable 0 */ +#define IER1 0x15 /* Interrupt Enable 1 */ +#define IER2 0x16 /* Interrupt Enable 2 */ + +#define ITCR 0x18 /* Interrupt Control */ +#define IVR 0x1A /* Interrupt Vector */ +#define IMVR 0x1C /* Interrupt Modified Vector */ + + + +/* MSCI channel (port) 0 registers - offset 0x20 + MSCI channel (port) 1 registers - offset 0x40 */ + +#define MSCI0_OFFSET 0x20 +#define MSCI1_OFFSET 0x40 + +#define TRBL 0x00 /* TX/RX buffer L */ +#define TRBH 0x01 /* TX/RX buffer H */ +#define ST0 0x02 /* Status 0 */ +#define ST1 0x03 /* Status 1 */ +#define ST2 0x04 /* Status 2 */ +#define ST3 0x05 /* Status 3 */ +#define FST 0x06 /* Frame Status */ +#define IE0 0x08 /* Interrupt Enable 0 */ +#define IE1 0x09 /* Interrupt Enable 1 */ +#define IE2 0x0A /* Interrupt Enable 2 */ +#define FIE 0x0B /* Frame Interrupt Enable */ +#define CMD 0x0C /* Command */ +#define MD0 0x0E /* Mode 0 */ +#define MD1 0x0F /* Mode 1 */ +#define MD2 0x10 /* Mode 2 */ +#define CTL 0x11 /* Control */ +#define SA0 0x12 /* Sync/Address 0 */ +#define SA1 0x13 /* Sync/Address 1 */ +#define IDL 0x14 /* Idle Pattern */ +#define TMC 0x15 /* Time Constant */ +#define RXS 0x16 /* RX Clock Source */ +#define TXS 0x17 /* TX Clock Source */ +#define TRC0 0x18 /* TX Ready Control 0 */ +#define TRC1 0x19 /* TX Ready Control 1 */ +#define RRC 0x1A /* RX Ready Control */ +#define CST0 0x1C /* Current Status 0 */ +#define CST1 0x1D /* Current Status 1 */ + + +/* Timer channel 0 (port 0 RX) registers - offset 0x60 + Timer channel 1 (port 0 TX) registers - offset 0x68 + Timer channel 2 (port 1 RX) registers - offset 0x70 + Timer channel 3 (port 1 TX) registers - offset 0x78 +*/ + +#define TIMER0RX_OFFSET 0x60 +#define TIMER0TX_OFFSET 0x68 +#define TIMER1RX_OFFSET 0x70 +#define TIMER1TX_OFFSET 0x78 + +#define TCNTL 0x00 /* Up-counter L */ +#define TCNTH 0x01 /* Up-counter H */ +#define TCONRL 0x02 /* Constant L */ +#define TCONRH 0x03 /* Constant H */ +#define TCSR 0x04 /* Control/Status */ +#define TEPR 0x05 /* Expand Prescale */ + + + +/* DMA channel 0 (port 0 RX) registers - offset 0x80 + DMA channel 1 (port 0 TX) registers - offset 0xA0 + DMA channel 2 (port 1 RX) registers - offset 0xC0 + DMA channel 3 (port 1 TX) registers - offset 0xE0 +*/ + +#define DMAC0RX_OFFSET 0x80 +#define DMAC0TX_OFFSET 0xA0 +#define DMAC1RX_OFFSET 0xC0 +#define DMAC1TX_OFFSET 0xE0 + +#define BARL 0x00 /* Buffer Address L (chained block) */ +#define BARH 0x01 /* Buffer Address H (chained block) */ +#define BARB 0x02 /* Buffer Address B (chained block) */ + +#define DARL 0x00 /* RX Destination Addr L (single block) */ +#define DARH 0x01 /* RX Destination Addr H (single block) */ +#define DARB 0x02 /* RX Destination Addr B (single block) */ + +#define SARL 0x04 /* TX Source Address L (single block) */ +#define SARH 0x05 /* TX Source Address H (single block) */ +#define SARB 0x06 /* TX Source Address B (single block) */ + +#define CPB 0x06 /* Chain Pointer Base (chained block) */ + +#define CDAL 0x08 /* Current Descriptor Addr L (chained block) */ +#define CDAH 0x09 /* Current Descriptor Addr H (chained block) */ +#define EDAL 0x0A /* Error Descriptor Addr L (chained block) */ +#define EDAH 0x0B /* Error Descriptor Addr H (chained block) */ +#define BFLL 0x0C /* RX Receive Buffer Length L (chained block)*/ +#define BFLH 0x0D /* RX Receive Buffer Length H (chained block)*/ +#define BCRL 0x0E /* Byte Count L */ +#define BCRH 0x0F /* Byte Count H */ +#define DSR 0x10 /* DMA Status */ +#define DSR_RX(node) (DSR + (node ? DMAC1RX_OFFSET : DMAC0RX_OFFSET)) +#define DSR_TX(node) (DSR + (node ? DMAC1TX_OFFSET : DMAC0TX_OFFSET)) +#define DMR 0x11 /* DMA Mode */ +#define DMR_RX(node) (DMR + (node ? DMAC1RX_OFFSET : DMAC0RX_OFFSET)) +#define DMR_TX(node) (DMR + (node ? DMAC1TX_OFFSET : DMAC0TX_OFFSET)) +#define FCT 0x13 /* Frame End Interrupt Counter */ +#define FCT_RX(node) (FCT + (node ? DMAC1RX_OFFSET : DMAC0RX_OFFSET)) +#define FCT_TX(node) (FCT + (node ? DMAC1TX_OFFSET : DMAC0TX_OFFSET)) +#define DIR 0x14 /* DMA Interrupt Enable */ +#define DIR_RX(node) (DIR + (node ? DMAC1RX_OFFSET : DMAC0RX_OFFSET)) +#define DIR_TX(node) (DIR + (node ? DMAC1TX_OFFSET : DMAC0TX_OFFSET)) +#define DCR 0x15 /* DMA Command */ +#define DCR_RX(node) (DCR + (node ? DMAC1RX_OFFSET : DMAC0RX_OFFSET)) +#define DCR_TX(node) (DCR + (node ? DMAC1TX_OFFSET : DMAC0TX_OFFSET)) + + + + +/* Descriptor Structure */ + +typedef struct { + u16 cp; /* Chain Pointer */ + u32 bp; /* Buffer Pointer (24 bits) */ + u16 len; /* Data Length */ + u8 stat; /* Status */ + u8 unused; /* pads to 2-byte boundary */ +}__packed pkt_desc; + + +/* Packet Descriptor Status bits */ + +#define ST_TX_EOM 0x80 /* End of frame */ +#define ST_TX_EOT 0x01 /* End of transmission */ + +#define ST_RX_EOM 0x80 /* End of frame */ +#define ST_RX_SHORT 0x40 /* Short frame */ +#define ST_RX_ABORT 0x20 /* Abort */ +#define ST_RX_RESBIT 0x10 /* Residual bit */ +#define ST_RX_OVERRUN 0x08 /* Overrun */ +#define ST_RX_CRC 0x04 /* CRC */ + +#define ST_ERROR_MASK 0x7C + +#define DIR_EOTE 0x80 /* Transfer completed */ +#define DIR_EOME 0x40 /* Frame Transfer Completed (chained-block) */ +#define DIR_BOFE 0x20 /* Buffer Overflow/Underflow (chained-block)*/ +#define DIR_COFE 0x10 /* Counter Overflow (chained-block) */ + + +#define DSR_EOT 0x80 /* Transfer completed */ +#define DSR_EOM 0x40 /* Frame Transfer Completed (chained-block) */ +#define DSR_BOF 0x20 /* Buffer Overflow/Underflow (chained-block)*/ +#define DSR_COF 0x10 /* Counter Overflow (chained-block) */ +#define DSR_DE 0x02 /* DMA Enable */ +#define DSR_DWE 0x01 /* DMA Write Disable */ + +/* DMA Master Enable Register (DMER) bits */ +#define DMER_DME 0x80 /* DMA Master Enable */ + + +#define CMD_RESET 0x21 /* Reset Channel */ +#define CMD_TX_ENABLE 0x02 /* Start transmitter */ +#define CMD_RX_ENABLE 0x12 /* Start receiver */ + +#define MD0_HDLC 0x80 /* Bit-sync HDLC mode */ +#define MD0_CRC_ENA 0x04 /* Enable CRC code calculation */ +#define MD0_CRC_CCITT 0x02 /* CCITT CRC instead of CRC-16 */ +#define MD0_CRC_PR1 0x01 /* Initial all-ones instead of all-zeros */ + +#define MD0_CRC_NONE 0x00 +#define MD0_CRC_16_0 0x04 +#define MD0_CRC_16 0x05 +#define MD0_CRC_ITU_0 0x06 +#define MD0_CRC_ITU 0x07 + +#define MD2_NRZ 0x00 +#define MD2_NRZI 0x20 +#define MD2_MANCHESTER 0x80 +#define MD2_FM_MARK 0xA0 +#define MD2_FM_SPACE 0xC0 +#define MD2_LOOPBACK 0x03 /* Local data Loopback */ + +#define CTL_NORTS 0x01 +#define CTL_IDLE 0x10 /* Transmit an idle pattern */ +#define CTL_UDRNC 0x20 /* Idle after CRC or FCS+flag transmission */ + +#define ST0_TXRDY 0x02 /* TX ready */ +#define ST0_RXRDY 0x01 /* RX ready */ + +#define ST1_UDRN 0x80 /* MSCI TX underrun */ +#define ST1_CDCD 0x04 /* DCD level changed */ + +#define ST3_CTS 0x08 /* modem input - /CTS */ +#define ST3_DCD 0x04 /* modem input - /DCD */ + +#define IE0_TXINT 0x80 /* TX INT MSCI interrupt enable */ +#define IE0_RXINTA 0x40 /* RX INT A MSCI interrupt enable */ +#define IE1_UDRN 0x80 /* TX underrun MSCI interrupt enable */ +#define IE1_CDCD 0x04 /* DCD level changed */ + +#define DCR_ABORT 0x01 /* Software abort command */ +#define DCR_CLEAR_EOF 0x02 /* Clear EOF interrupt */ + +/* TX and RX Clock Source - RXS and TXS */ +#define CLK_BRG_MASK 0x0F +#define CLK_LINE_RX 0x00 /* TX/RX clock line input */ +#define CLK_LINE_TX 0x00 /* TX/RX line input */ +#define CLK_BRG_RX 0x40 /* internal baud rate generator */ +#define CLK_BRG_TX 0x40 /* internal baud rate generator */ +#define CLK_RXCLK_TX 0x60 /* TX clock from RX clock */ + +#endif |