diff options
Diffstat (limited to 'kernel/drivers/net/phy/phy_device.c')
| -rw-r--r-- | kernel/drivers/net/phy/phy_device.c | 1407 |
1 files changed, 1407 insertions, 0 deletions
diff --git a/kernel/drivers/net/phy/phy_device.c b/kernel/drivers/net/phy/phy_device.c new file mode 100644 index 000000000..d551df62e --- /dev/null +++ b/kernel/drivers/net/phy/phy_device.c @@ -0,0 +1,1407 @@ +/* Framework for finding and configuring PHYs. + * Also contains generic PHY driver + * + * Author: Andy Fleming + * + * Copyright (c) 2004 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/errno.h> +#include <linux/unistd.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/mii.h> +#include <linux/ethtool.h> +#include <linux/phy.h> +#include <linux/mdio.h> +#include <linux/io.h> +#include <linux/uaccess.h> +#include <linux/of.h> + +#include <asm/irq.h> + +MODULE_DESCRIPTION("PHY library"); +MODULE_AUTHOR("Andy Fleming"); +MODULE_LICENSE("GPL"); + +void phy_device_free(struct phy_device *phydev) +{ + put_device(&phydev->dev); +} +EXPORT_SYMBOL(phy_device_free); + +static void phy_device_release(struct device *dev) +{ + kfree(to_phy_device(dev)); +} + +enum genphy_driver { + GENPHY_DRV_1G, + GENPHY_DRV_10G, + GENPHY_DRV_MAX +}; + +static struct phy_driver genphy_driver[GENPHY_DRV_MAX]; + +static LIST_HEAD(phy_fixup_list); +static DEFINE_MUTEX(phy_fixup_lock); + +/** + * phy_register_fixup - creates a new phy_fixup and adds it to the list + * @bus_id: A string which matches phydev->dev.bus_id (or PHY_ANY_ID) + * @phy_uid: Used to match against phydev->phy_id (the UID of the PHY) + * It can also be PHY_ANY_UID + * @phy_uid_mask: Applied to phydev->phy_id and fixup->phy_uid before + * comparison + * @run: The actual code to be run when a matching PHY is found + */ +int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask, + int (*run)(struct phy_device *)) +{ + struct phy_fixup *fixup = kzalloc(sizeof(*fixup), GFP_KERNEL); + + if (!fixup) + return -ENOMEM; + + strlcpy(fixup->bus_id, bus_id, sizeof(fixup->bus_id)); + fixup->phy_uid = phy_uid; + fixup->phy_uid_mask = phy_uid_mask; + fixup->run = run; + + mutex_lock(&phy_fixup_lock); + list_add_tail(&fixup->list, &phy_fixup_list); + mutex_unlock(&phy_fixup_lock); + + return 0; +} +EXPORT_SYMBOL(phy_register_fixup); + +/* Registers a fixup to be run on any PHY with the UID in phy_uid */ +int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask, + int (*run)(struct phy_device *)) +{ + return phy_register_fixup(PHY_ANY_ID, phy_uid, phy_uid_mask, run); +} +EXPORT_SYMBOL(phy_register_fixup_for_uid); + +/* Registers a fixup to be run on the PHY with id string bus_id */ +int phy_register_fixup_for_id(const char *bus_id, + int (*run)(struct phy_device *)) +{ + return phy_register_fixup(bus_id, PHY_ANY_UID, 0xffffffff, run); +} +EXPORT_SYMBOL(phy_register_fixup_for_id); + +/* Returns 1 if fixup matches phydev in bus_id and phy_uid. + * Fixups can be set to match any in one or more fields. + */ +static int phy_needs_fixup(struct phy_device *phydev, struct phy_fixup *fixup) +{ + if (strcmp(fixup->bus_id, dev_name(&phydev->dev)) != 0) + if (strcmp(fixup->bus_id, PHY_ANY_ID) != 0) + return 0; + + if ((fixup->phy_uid & fixup->phy_uid_mask) != + (phydev->phy_id & fixup->phy_uid_mask)) + if (fixup->phy_uid != PHY_ANY_UID) + return 0; + + return 1; +} + +/* Runs any matching fixups for this phydev */ +static int phy_scan_fixups(struct phy_device *phydev) +{ + struct phy_fixup *fixup; + + mutex_lock(&phy_fixup_lock); + list_for_each_entry(fixup, &phy_fixup_list, list) { + if (phy_needs_fixup(phydev, fixup)) { + int err = fixup->run(phydev); + + if (err < 0) { + mutex_unlock(&phy_fixup_lock); + return err; + } + phydev->has_fixups = true; + } + } + mutex_unlock(&phy_fixup_lock); + + return 0; +} + +struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id, + bool is_c45, + struct phy_c45_device_ids *c45_ids) +{ + struct phy_device *dev; + + /* We allocate the device, and initialize the default values */ + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (NULL == dev) + return (struct phy_device *)PTR_ERR((void *)-ENOMEM); + + dev->dev.release = phy_device_release; + + dev->speed = 0; + dev->duplex = -1; + dev->pause = 0; + dev->asym_pause = 0; + dev->link = 1; + dev->interface = PHY_INTERFACE_MODE_GMII; + + dev->autoneg = AUTONEG_ENABLE; + + dev->is_c45 = is_c45; + dev->addr = addr; + dev->phy_id = phy_id; + if (c45_ids) + dev->c45_ids = *c45_ids; + dev->bus = bus; + dev->dev.parent = bus->parent; + dev->dev.bus = &mdio_bus_type; + dev->irq = bus->irq != NULL ? bus->irq[addr] : PHY_POLL; + dev_set_name(&dev->dev, PHY_ID_FMT, bus->id, addr); + + dev->state = PHY_DOWN; + + mutex_init(&dev->lock); + INIT_DELAYED_WORK(&dev->state_queue, phy_state_machine); + INIT_WORK(&dev->phy_queue, phy_change); + + /* Request the appropriate module unconditionally; don't + * bother trying to do so only if it isn't already loaded, + * because that gets complicated. A hotplug event would have + * done an unconditional modprobe anyway. + * We don't do normal hotplug because it won't work for MDIO + * -- because it relies on the device staying around for long + * enough for the driver to get loaded. With MDIO, the NIC + * driver will get bored and give up as soon as it finds that + * there's no driver _already_ loaded. + */ + request_module(MDIO_MODULE_PREFIX MDIO_ID_FMT, MDIO_ID_ARGS(phy_id)); + + device_initialize(&dev->dev); + + return dev; +} +EXPORT_SYMBOL(phy_device_create); + +/** + * get_phy_c45_ids - reads the specified addr for its 802.3-c45 IDs. + * @bus: the target MII bus + * @addr: PHY address on the MII bus + * @phy_id: where to store the ID retrieved. + * @c45_ids: where to store the c45 ID information. + * + * If the PHY devices-in-package appears to be valid, it and the + * corresponding identifiers are stored in @c45_ids, zero is stored + * in @phy_id. Otherwise 0xffffffff is stored in @phy_id. Returns + * zero on success. + * + */ +static int get_phy_c45_ids(struct mii_bus *bus, int addr, u32 *phy_id, + struct phy_c45_device_ids *c45_ids) { + int phy_reg; + int i, reg_addr; + const int num_ids = ARRAY_SIZE(c45_ids->device_ids); + + /* Find first non-zero Devices In package. Device + * zero is reserved, so don't probe it. + */ + for (i = 1; + i < num_ids && c45_ids->devices_in_package == 0; + i++) { + reg_addr = MII_ADDR_C45 | i << 16 | MDIO_DEVS2; + phy_reg = mdiobus_read(bus, addr, reg_addr); + if (phy_reg < 0) + return -EIO; + c45_ids->devices_in_package = (phy_reg & 0xffff) << 16; + + reg_addr = MII_ADDR_C45 | i << 16 | MDIO_DEVS1; + phy_reg = mdiobus_read(bus, addr, reg_addr); + if (phy_reg < 0) + return -EIO; + c45_ids->devices_in_package |= (phy_reg & 0xffff); + + /* If mostly Fs, there is no device there, + * let's get out of here. + */ + if ((c45_ids->devices_in_package & 0x1fffffff) == 0x1fffffff) { + *phy_id = 0xffffffff; + return 0; + } + } + + /* Now probe Device Identifiers for each device present. */ + for (i = 1; i < num_ids; i++) { + if (!(c45_ids->devices_in_package & (1 << i))) + continue; + + reg_addr = MII_ADDR_C45 | i << 16 | MII_PHYSID1; + phy_reg = mdiobus_read(bus, addr, reg_addr); + if (phy_reg < 0) + return -EIO; + c45_ids->device_ids[i] = (phy_reg & 0xffff) << 16; + + reg_addr = MII_ADDR_C45 | i << 16 | MII_PHYSID2; + phy_reg = mdiobus_read(bus, addr, reg_addr); + if (phy_reg < 0) + return -EIO; + c45_ids->device_ids[i] |= (phy_reg & 0xffff); + } + *phy_id = 0; + return 0; +} + +/** + * get_phy_id - reads the specified addr for its ID. + * @bus: the target MII bus + * @addr: PHY address on the MII bus + * @phy_id: where to store the ID retrieved. + * @is_c45: If true the PHY uses the 802.3 clause 45 protocol + * @c45_ids: where to store the c45 ID information. + * + * Description: In the case of a 802.3-c22 PHY, reads the ID registers + * of the PHY at @addr on the @bus, stores it in @phy_id and returns + * zero on success. + * + * In the case of a 802.3-c45 PHY, get_phy_c45_ids() is invoked, and + * its return value is in turn returned. + * + */ +static int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id, + bool is_c45, struct phy_c45_device_ids *c45_ids) +{ + int phy_reg; + + if (is_c45) + return get_phy_c45_ids(bus, addr, phy_id, c45_ids); + + /* Grab the bits from PHYIR1, and put them in the upper half */ + phy_reg = mdiobus_read(bus, addr, MII_PHYSID1); + if (phy_reg < 0) + return -EIO; + + *phy_id = (phy_reg & 0xffff) << 16; + + /* Grab the bits from PHYIR2, and put them in the lower half */ + phy_reg = mdiobus_read(bus, addr, MII_PHYSID2); + if (phy_reg < 0) + return -EIO; + + *phy_id |= (phy_reg & 0xffff); + + return 0; +} + +/** + * get_phy_device - reads the specified PHY device and returns its @phy_device + * struct + * @bus: the target MII bus + * @addr: PHY address on the MII bus + * @is_c45: If true the PHY uses the 802.3 clause 45 protocol + * + * Description: Reads the ID registers of the PHY at @addr on the + * @bus, then allocates and returns the phy_device to represent it. + */ +struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45) +{ + struct phy_c45_device_ids c45_ids = {0}; + u32 phy_id = 0; + int r; + + r = get_phy_id(bus, addr, &phy_id, is_c45, &c45_ids); + if (r) + return ERR_PTR(r); + + /* If the phy_id is mostly Fs, there is no device there */ + if ((phy_id & 0x1fffffff) == 0x1fffffff) + return NULL; + + return phy_device_create(bus, addr, phy_id, is_c45, &c45_ids); +} +EXPORT_SYMBOL(get_phy_device); + +/** + * phy_device_register - Register the phy device on the MDIO bus + * @phydev: phy_device structure to be added to the MDIO bus + */ +int phy_device_register(struct phy_device *phydev) +{ + int err; + + /* Don't register a phy if one is already registered at this address */ + if (phydev->bus->phy_map[phydev->addr]) + return -EINVAL; + phydev->bus->phy_map[phydev->addr] = phydev; + + /* Run all of the fixups for this PHY */ + err = phy_scan_fixups(phydev); + if (err) { + pr_err("PHY %d failed to initialize\n", phydev->addr); + goto out; + } + + err = device_add(&phydev->dev); + if (err) { + pr_err("PHY %d failed to add\n", phydev->addr); + goto out; + } + + return 0; + + out: + phydev->bus->phy_map[phydev->addr] = NULL; + return err; +} +EXPORT_SYMBOL(phy_device_register); + +/** + * phy_find_first - finds the first PHY device on the bus + * @bus: the target MII bus + */ +struct phy_device *phy_find_first(struct mii_bus *bus) +{ + int addr; + + for (addr = 0; addr < PHY_MAX_ADDR; addr++) { + if (bus->phy_map[addr]) + return bus->phy_map[addr]; + } + return NULL; +} +EXPORT_SYMBOL(phy_find_first); + +/** + * phy_prepare_link - prepares the PHY layer to monitor link status + * @phydev: target phy_device struct + * @handler: callback function for link status change notifications + * + * Description: Tells the PHY infrastructure to handle the + * gory details on monitoring link status (whether through + * polling or an interrupt), and to call back to the + * connected device driver when the link status changes. + * If you want to monitor your own link state, don't call + * this function. + */ +static void phy_prepare_link(struct phy_device *phydev, + void (*handler)(struct net_device *)) +{ + phydev->adjust_link = handler; +} + +/** + * phy_connect_direct - connect an ethernet device to a specific phy_device + * @dev: the network device to connect + * @phydev: the pointer to the phy device + * @handler: callback function for state change notifications + * @interface: PHY device's interface + */ +int phy_connect_direct(struct net_device *dev, struct phy_device *phydev, + void (*handler)(struct net_device *), + phy_interface_t interface) +{ + int rc; + + rc = phy_attach_direct(dev, phydev, phydev->dev_flags, interface); + if (rc) + return rc; + + phy_prepare_link(phydev, handler); + phy_start_machine(phydev); + if (phydev->irq > 0) + phy_start_interrupts(phydev); + + return 0; +} +EXPORT_SYMBOL(phy_connect_direct); + +/** + * phy_connect - connect an ethernet device to a PHY device + * @dev: the network device to connect + * @bus_id: the id string of the PHY device to connect + * @handler: callback function for state change notifications + * @interface: PHY device's interface + * + * Description: Convenience function for connecting ethernet + * devices to PHY devices. The default behavior is for + * the PHY infrastructure to handle everything, and only notify + * the connected driver when the link status changes. If you + * don't want, or can't use the provided functionality, you may + * choose to call only the subset of functions which provide + * the desired functionality. + */ +struct phy_device *phy_connect(struct net_device *dev, const char *bus_id, + void (*handler)(struct net_device *), + phy_interface_t interface) +{ + struct phy_device *phydev; + struct device *d; + int rc; + + /* Search the list of PHY devices on the mdio bus for the + * PHY with the requested name + */ + d = bus_find_device_by_name(&mdio_bus_type, NULL, bus_id); + if (!d) { + pr_err("PHY %s not found\n", bus_id); + return ERR_PTR(-ENODEV); + } + phydev = to_phy_device(d); + + rc = phy_connect_direct(dev, phydev, handler, interface); + if (rc) + return ERR_PTR(rc); + + return phydev; +} +EXPORT_SYMBOL(phy_connect); + +/** + * phy_disconnect - disable interrupts, stop state machine, and detach a PHY + * device + * @phydev: target phy_device struct + */ +void phy_disconnect(struct phy_device *phydev) +{ + if (phydev->irq > 0) + phy_stop_interrupts(phydev); + + phy_stop_machine(phydev); + + phydev->adjust_link = NULL; + + phy_detach(phydev); +} +EXPORT_SYMBOL(phy_disconnect); + +/** + * phy_poll_reset - Safely wait until a PHY reset has properly completed + * @phydev: The PHY device to poll + * + * Description: According to IEEE 802.3, Section 2, Subsection 22.2.4.1.1, as + * published in 2008, a PHY reset may take up to 0.5 seconds. The MII BMCR + * register must be polled until the BMCR_RESET bit clears. + * + * Furthermore, any attempts to write to PHY registers may have no effect + * or even generate MDIO bus errors until this is complete. + * + * Some PHYs (such as the Marvell 88E1111) don't entirely conform to the + * standard and do not fully reset after the BMCR_RESET bit is set, and may + * even *REQUIRE* a soft-reset to properly restart autonegotiation. In an + * effort to support such broken PHYs, this function is separate from the + * standard phy_init_hw() which will zero all the other bits in the BMCR + * and reapply all driver-specific and board-specific fixups. + */ +static int phy_poll_reset(struct phy_device *phydev) +{ + /* Poll until the reset bit clears (50ms per retry == 0.6 sec) */ + unsigned int retries = 12; + int ret; + + do { + msleep(50); + ret = phy_read(phydev, MII_BMCR); + if (ret < 0) + return ret; + } while (ret & BMCR_RESET && --retries); + if (ret & BMCR_RESET) + return -ETIMEDOUT; + + /* Some chips (smsc911x) may still need up to another 1ms after the + * BMCR_RESET bit is cleared before they are usable. + */ + msleep(1); + return 0; +} + +int phy_init_hw(struct phy_device *phydev) +{ + int ret = 0; + + if (!phydev->drv || !phydev->drv->config_init) + return 0; + + if (phydev->drv->soft_reset) + ret = phydev->drv->soft_reset(phydev); + else + ret = genphy_soft_reset(phydev); + + if (ret < 0) + return ret; + + ret = phy_scan_fixups(phydev); + if (ret < 0) + return ret; + + return phydev->drv->config_init(phydev); +} +EXPORT_SYMBOL(phy_init_hw); + +/** + * phy_attach_direct - attach a network device to a given PHY device pointer + * @dev: network device to attach + * @phydev: Pointer to phy_device to attach + * @flags: PHY device's dev_flags + * @interface: PHY device's interface + * + * Description: Called by drivers to attach to a particular PHY + * device. The phy_device is found, and properly hooked up + * to the phy_driver. If no driver is attached, then a + * generic driver is used. The phy_device is given a ptr to + * the attaching device, and given a callback for link status + * change. The phy_device is returned to the attaching driver. + */ +int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, + u32 flags, phy_interface_t interface) +{ + struct device *d = &phydev->dev; + struct module *bus_module; + int err; + + /* Assume that if there is no driver, that it doesn't + * exist, and we should use the genphy driver. + */ + if (NULL == d->driver) { + if (phydev->is_c45) + d->driver = &genphy_driver[GENPHY_DRV_10G].driver; + else + d->driver = &genphy_driver[GENPHY_DRV_1G].driver; + + err = d->driver->probe(d); + if (err >= 0) + err = device_bind_driver(d); + + if (err) + return err; + } + + if (phydev->attached_dev) { + dev_err(&dev->dev, "PHY already attached\n"); + return -EBUSY; + } + + /* Increment the bus module reference count */ + bus_module = phydev->bus->dev.driver ? + phydev->bus->dev.driver->owner : NULL; + if (!try_module_get(bus_module)) { + dev_err(&dev->dev, "failed to get the bus module\n"); + return -EIO; + } + + phydev->attached_dev = dev; + dev->phydev = phydev; + + phydev->dev_flags = flags; + + phydev->interface = interface; + + phydev->state = PHY_READY; + + /* Do initial configuration here, now that + * we have certain key parameters + * (dev_flags and interface) + */ + err = phy_init_hw(phydev); + if (err) + phy_detach(phydev); + else + phy_resume(phydev); + + return err; +} +EXPORT_SYMBOL(phy_attach_direct); + +/** + * phy_attach - attach a network device to a particular PHY device + * @dev: network device to attach + * @bus_id: Bus ID of PHY device to attach + * @interface: PHY device's interface + * + * Description: Same as phy_attach_direct() except that a PHY bus_id + * string is passed instead of a pointer to a struct phy_device. + */ +struct phy_device *phy_attach(struct net_device *dev, const char *bus_id, + phy_interface_t interface) +{ + struct bus_type *bus = &mdio_bus_type; + struct phy_device *phydev; + struct device *d; + int rc; + + /* Search the list of PHY devices on the mdio bus for the + * PHY with the requested name + */ + d = bus_find_device_by_name(bus, NULL, bus_id); + if (!d) { + pr_err("PHY %s not found\n", bus_id); + return ERR_PTR(-ENODEV); + } + phydev = to_phy_device(d); + + rc = phy_attach_direct(dev, phydev, phydev->dev_flags, interface); + if (rc) + return ERR_PTR(rc); + + return phydev; +} +EXPORT_SYMBOL(phy_attach); + +/** + * phy_detach - detach a PHY device from its network device + * @phydev: target phy_device struct + */ +void phy_detach(struct phy_device *phydev) +{ + int i; + + if (phydev->bus->dev.driver) + module_put(phydev->bus->dev.driver->owner); + + phydev->attached_dev->phydev = NULL; + phydev->attached_dev = NULL; + phy_suspend(phydev); + + /* If the device had no specific driver before (i.e. - it + * was using the generic driver), we unbind the device + * from the generic driver so that there's a chance a + * real driver could be loaded + */ + for (i = 0; i < ARRAY_SIZE(genphy_driver); i++) { + if (phydev->dev.driver == &genphy_driver[i].driver) { + device_release_driver(&phydev->dev); + break; + } + } +} +EXPORT_SYMBOL(phy_detach); + +int phy_suspend(struct phy_device *phydev) +{ + struct phy_driver *phydrv = to_phy_driver(phydev->dev.driver); + struct ethtool_wolinfo wol = { .cmd = ETHTOOL_GWOL }; + int ret = 0; + + /* If the device has WOL enabled, we cannot suspend the PHY */ + phy_ethtool_get_wol(phydev, &wol); + if (wol.wolopts) + return -EBUSY; + + if (phydrv->suspend) + ret = phydrv->suspend(phydev); + + if (ret) + return ret; + + phydev->suspended = true; + + return ret; +} +EXPORT_SYMBOL(phy_suspend); + +int phy_resume(struct phy_device *phydev) +{ + struct phy_driver *phydrv = to_phy_driver(phydev->dev.driver); + int ret = 0; + + if (phydrv->resume) + ret = phydrv->resume(phydev); + + if (ret) + return ret; + + phydev->suspended = false; + + return ret; +} +EXPORT_SYMBOL(phy_resume); + +/* Generic PHY support and helper functions */ + +/** + * genphy_config_advert - sanitize and advertise auto-negotiation parameters + * @phydev: target phy_device struct + * + * Description: Writes MII_ADVERTISE with the appropriate values, + * after sanitizing the values to make sure we only advertise + * what is supported. Returns < 0 on error, 0 if the PHY's advertisement + * hasn't changed, and > 0 if it has changed. + */ +static int genphy_config_advert(struct phy_device *phydev) +{ + u32 advertise; + int oldadv, adv, bmsr; + int err, changed = 0; + + /* Only allow advertising what this PHY supports */ + phydev->advertising &= phydev->supported; + advertise = phydev->advertising; + + /* Setup standard advertisement */ + adv = phy_read(phydev, MII_ADVERTISE); + if (adv < 0) + return adv; + + oldadv = adv; + adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP | + ADVERTISE_PAUSE_ASYM); + adv |= ethtool_adv_to_mii_adv_t(advertise); + + if (adv != oldadv) { + err = phy_write(phydev, MII_ADVERTISE, adv); + + if (err < 0) + return err; + changed = 1; + } + + bmsr = phy_read(phydev, MII_BMSR); + if (bmsr < 0) + return bmsr; + + /* Per 802.3-2008, Section 22.2.4.2.16 Extended status all + * 1000Mbits/sec capable PHYs shall have the BMSR_ESTATEN bit set to a + * logical 1. + */ + if (!(bmsr & BMSR_ESTATEN)) + return changed; + + /* Configure gigabit if it's supported */ + adv = phy_read(phydev, MII_CTRL1000); + if (adv < 0) + return adv; + + oldadv = adv; + adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF); + + if (phydev->supported & (SUPPORTED_1000baseT_Half | + SUPPORTED_1000baseT_Full)) { + adv |= ethtool_adv_to_mii_ctrl1000_t(advertise); + } + + if (adv != oldadv) + changed = 1; + + err = phy_write(phydev, MII_CTRL1000, adv); + if (err < 0) + return err; + + return changed; +} + +/** + * genphy_setup_forced - configures/forces speed/duplex from @phydev + * @phydev: target phy_device struct + * + * Description: Configures MII_BMCR to force speed/duplex + * to the values in phydev. Assumes that the values are valid. + * Please see phy_sanitize_settings(). + */ +int genphy_setup_forced(struct phy_device *phydev) +{ + int ctl = 0; + + phydev->pause = 0; + phydev->asym_pause = 0; + + if (SPEED_1000 == phydev->speed) + ctl |= BMCR_SPEED1000; + else if (SPEED_100 == phydev->speed) + ctl |= BMCR_SPEED100; + + if (DUPLEX_FULL == phydev->duplex) + ctl |= BMCR_FULLDPLX; + + return phy_write(phydev, MII_BMCR, ctl); +} +EXPORT_SYMBOL(genphy_setup_forced); + +/** + * genphy_restart_aneg - Enable and Restart Autonegotiation + * @phydev: target phy_device struct + */ +int genphy_restart_aneg(struct phy_device *phydev) +{ + int ctl = phy_read(phydev, MII_BMCR); + + if (ctl < 0) + return ctl; + + ctl |= BMCR_ANENABLE | BMCR_ANRESTART; + + /* Don't isolate the PHY if we're negotiating */ + ctl &= ~BMCR_ISOLATE; + + return phy_write(phydev, MII_BMCR, ctl); +} +EXPORT_SYMBOL(genphy_restart_aneg); + +/** + * genphy_config_aneg - restart auto-negotiation or write BMCR + * @phydev: target phy_device struct + * + * Description: If auto-negotiation is enabled, we configure the + * advertising, and then restart auto-negotiation. If it is not + * enabled, then we write the BMCR. + */ +int genphy_config_aneg(struct phy_device *phydev) +{ + int result; + + if (AUTONEG_ENABLE != phydev->autoneg) + return genphy_setup_forced(phydev); + + result = genphy_config_advert(phydev); + if (result < 0) /* error */ + return result; + if (result == 0) { + /* Advertisement hasn't changed, but maybe aneg was never on to + * begin with? Or maybe phy was isolated? + */ + int ctl = phy_read(phydev, MII_BMCR); + + if (ctl < 0) + return ctl; + + if (!(ctl & BMCR_ANENABLE) || (ctl & BMCR_ISOLATE)) + result = 1; /* do restart aneg */ + } + + /* Only restart aneg if we are advertising something different + * than we were before. + */ + if (result > 0) + result = genphy_restart_aneg(phydev); + + return result; +} +EXPORT_SYMBOL(genphy_config_aneg); + +/** + * genphy_aneg_done - return auto-negotiation status + * @phydev: target phy_device struct + * + * Description: Reads the status register and returns 0 either if + * auto-negotiation is incomplete, or if there was an error. + * Returns BMSR_ANEGCOMPLETE if auto-negotiation is done. + */ +int genphy_aneg_done(struct phy_device *phydev) +{ + int retval = phy_read(phydev, MII_BMSR); + + return (retval < 0) ? retval : (retval & BMSR_ANEGCOMPLETE); +} +EXPORT_SYMBOL(genphy_aneg_done); + +static int gen10g_config_aneg(struct phy_device *phydev) +{ + return 0; +} + +/** + * genphy_update_link - update link status in @phydev + * @phydev: target phy_device struct + * + * Description: Update the value in phydev->link to reflect the + * current link value. In order to do this, we need to read + * the status register twice, keeping the second value. + */ +int genphy_update_link(struct phy_device *phydev) +{ + int status; + + /* Do a fake read */ + status = phy_read(phydev, MII_BMSR); + if (status < 0) + return status; + + /* Read link and autonegotiation status */ + status = phy_read(phydev, MII_BMSR); + if (status < 0) + return status; + + if ((status & BMSR_LSTATUS) == 0) + phydev->link = 0; + else + phydev->link = 1; + + return 0; +} +EXPORT_SYMBOL(genphy_update_link); + +/** + * genphy_read_status - check the link status and update current link state + * @phydev: target phy_device struct + * + * Description: Check the link, then figure out the current state + * by comparing what we advertise with what the link partner + * advertises. Start by checking the gigabit possibilities, + * then move on to 10/100. + */ +int genphy_read_status(struct phy_device *phydev) +{ + int adv; + int err; + int lpa; + int lpagb = 0; + int common_adv; + int common_adv_gb = 0; + + /* Update the link, but return if there was an error */ + err = genphy_update_link(phydev); + if (err) + return err; + + phydev->lp_advertising = 0; + + if (AUTONEG_ENABLE == phydev->autoneg) { + if (phydev->supported & (SUPPORTED_1000baseT_Half + | SUPPORTED_1000baseT_Full)) { + lpagb = phy_read(phydev, MII_STAT1000); + if (lpagb < 0) + return lpagb; + + adv = phy_read(phydev, MII_CTRL1000); + if (adv < 0) + return adv; + + phydev->lp_advertising = + mii_stat1000_to_ethtool_lpa_t(lpagb); + common_adv_gb = lpagb & adv << 2; + } + + lpa = phy_read(phydev, MII_LPA); + if (lpa < 0) + return lpa; + + phydev->lp_advertising |= mii_lpa_to_ethtool_lpa_t(lpa); + + adv = phy_read(phydev, MII_ADVERTISE); + if (adv < 0) + return adv; + + common_adv = lpa & adv; + + phydev->speed = SPEED_10; + phydev->duplex = DUPLEX_HALF; + phydev->pause = 0; + phydev->asym_pause = 0; + + if (common_adv_gb & (LPA_1000FULL | LPA_1000HALF)) { + phydev->speed = SPEED_1000; + + if (common_adv_gb & LPA_1000FULL) + phydev->duplex = DUPLEX_FULL; + } else if (common_adv & (LPA_100FULL | LPA_100HALF)) { + phydev->speed = SPEED_100; + + if (common_adv & LPA_100FULL) + phydev->duplex = DUPLEX_FULL; + } else + if (common_adv & LPA_10FULL) + phydev->duplex = DUPLEX_FULL; + + if (phydev->duplex == DUPLEX_FULL) { + phydev->pause = lpa & LPA_PAUSE_CAP ? 1 : 0; + phydev->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0; + } + } else { + int bmcr = phy_read(phydev, MII_BMCR); + + if (bmcr < 0) + return bmcr; + + if (bmcr & BMCR_FULLDPLX) + phydev->duplex = DUPLEX_FULL; + else + phydev->duplex = DUPLEX_HALF; + + if (bmcr & BMCR_SPEED1000) + phydev->speed = SPEED_1000; + else if (bmcr & BMCR_SPEED100) + phydev->speed = SPEED_100; + else + phydev->speed = SPEED_10; + + phydev->pause = 0; + phydev->asym_pause = 0; + } + + return 0; +} +EXPORT_SYMBOL(genphy_read_status); + +static int gen10g_read_status(struct phy_device *phydev) +{ + int devad, reg; + u32 mmd_mask = phydev->c45_ids.devices_in_package; + + phydev->link = 1; + + /* For now just lie and say it's 10G all the time */ + phydev->speed = SPEED_10000; + phydev->duplex = DUPLEX_FULL; + + for (devad = 0; mmd_mask; devad++, mmd_mask = mmd_mask >> 1) { + if (!(mmd_mask & 1)) + continue; + + /* Read twice because link state is latched and a + * read moves the current state into the register + */ + phy_read_mmd(phydev, devad, MDIO_STAT1); + reg = phy_read_mmd(phydev, devad, MDIO_STAT1); + if (reg < 0 || !(reg & MDIO_STAT1_LSTATUS)) + phydev->link = 0; + } + + return 0; +} + +/** + * genphy_soft_reset - software reset the PHY via BMCR_RESET bit + * @phydev: target phy_device struct + * + * Description: Perform a software PHY reset using the standard + * BMCR_RESET bit and poll for the reset bit to be cleared. + * + * Returns: 0 on success, < 0 on failure + */ +int genphy_soft_reset(struct phy_device *phydev) +{ + int ret; + + ret = phy_write(phydev, MII_BMCR, BMCR_RESET); + if (ret < 0) + return ret; + + return phy_poll_reset(phydev); +} +EXPORT_SYMBOL(genphy_soft_reset); + +int genphy_config_init(struct phy_device *phydev) +{ + int val; + u32 features; + + features = (SUPPORTED_TP | SUPPORTED_MII + | SUPPORTED_AUI | SUPPORTED_FIBRE | + SUPPORTED_BNC); + + /* Do we support autonegotiation? */ + val = phy_read(phydev, MII_BMSR); + if (val < 0) + return val; + + if (val & BMSR_ANEGCAPABLE) + features |= SUPPORTED_Autoneg; + + if (val & BMSR_100FULL) + features |= SUPPORTED_100baseT_Full; + if (val & BMSR_100HALF) + features |= SUPPORTED_100baseT_Half; + if (val & BMSR_10FULL) + features |= SUPPORTED_10baseT_Full; + if (val & BMSR_10HALF) + features |= SUPPORTED_10baseT_Half; + + if (val & BMSR_ESTATEN) { + val = phy_read(phydev, MII_ESTATUS); + if (val < 0) + return val; + + if (val & ESTATUS_1000_TFULL) + features |= SUPPORTED_1000baseT_Full; + if (val & ESTATUS_1000_THALF) + features |= SUPPORTED_1000baseT_Half; + } + + phydev->supported &= features; + phydev->advertising &= features; + + return 0; +} + +static int gen10g_soft_reset(struct phy_device *phydev) +{ + /* Do nothing for now */ + return 0; +} +EXPORT_SYMBOL(genphy_config_init); + +static int gen10g_config_init(struct phy_device *phydev) +{ + /* Temporarily just say we support everything */ + phydev->supported = SUPPORTED_10000baseT_Full; + phydev->advertising = SUPPORTED_10000baseT_Full; + + return 0; +} + +int genphy_suspend(struct phy_device *phydev) +{ + int value; + + mutex_lock(&phydev->lock); + + value = phy_read(phydev, MII_BMCR); + phy_write(phydev, MII_BMCR, value | BMCR_PDOWN); + + mutex_unlock(&phydev->lock); + + return 0; +} +EXPORT_SYMBOL(genphy_suspend); + +static int gen10g_suspend(struct phy_device *phydev) +{ + return 0; +} + +int genphy_resume(struct phy_device *phydev) +{ + int value; + + mutex_lock(&phydev->lock); + + value = phy_read(phydev, MII_BMCR); + phy_write(phydev, MII_BMCR, value & ~BMCR_PDOWN); + + mutex_unlock(&phydev->lock); + + return 0; +} +EXPORT_SYMBOL(genphy_resume); + +static int gen10g_resume(struct phy_device *phydev) +{ + return 0; +} + +static void of_set_phy_supported(struct phy_device *phydev) +{ + struct device_node *node = phydev->dev.of_node; + u32 max_speed; + + if (!IS_ENABLED(CONFIG_OF_MDIO)) + return; + + if (!node) + return; + + if (!of_property_read_u32(node, "max-speed", &max_speed)) { + /* The default values for phydev->supported are provided by the PHY + * driver "features" member, we want to reset to sane defaults fist + * before supporting higher speeds. + */ + phydev->supported &= PHY_DEFAULT_FEATURES; + + switch (max_speed) { + default: + return; + + case SPEED_1000: + phydev->supported |= PHY_1000BT_FEATURES; + case SPEED_100: + phydev->supported |= PHY_100BT_FEATURES; + case SPEED_10: + phydev->supported |= PHY_10BT_FEATURES; + } + } +} + +/** + * phy_probe - probe and init a PHY device + * @dev: device to probe and init + * + * Description: Take care of setting up the phy_device structure, + * set the state to READY (the driver's init function should + * set it to STARTING if needed). + */ +static int phy_probe(struct device *dev) +{ + struct phy_device *phydev = to_phy_device(dev); + struct device_driver *drv = phydev->dev.driver; + struct phy_driver *phydrv = to_phy_driver(drv); + int err = 0; + + phydev->drv = phydrv; + + /* Disable the interrupt if the PHY doesn't support it + * but the interrupt is still a valid one + */ + if (!(phydrv->flags & PHY_HAS_INTERRUPT) && + phy_interrupt_is_valid(phydev)) + phydev->irq = PHY_POLL; + + if (phydrv->flags & PHY_IS_INTERNAL) + phydev->is_internal = true; + + mutex_lock(&phydev->lock); + + /* Start out supporting everything. Eventually, + * a controller will attach, and may modify one + * or both of these values + */ + phydev->supported = phydrv->features; + of_set_phy_supported(phydev); + phydev->advertising = phydev->supported; + + /* Set the state to READY by default */ + phydev->state = PHY_READY; + + if (phydev->drv->probe) + err = phydev->drv->probe(phydev); + + mutex_unlock(&phydev->lock); + + return err; +} + +static int phy_remove(struct device *dev) +{ + struct phy_device *phydev = to_phy_device(dev); + + mutex_lock(&phydev->lock); + phydev->state = PHY_DOWN; + mutex_unlock(&phydev->lock); + + if (phydev->drv->remove) + phydev->drv->remove(phydev); + phydev->drv = NULL; + + return 0; +} + +/** + * phy_driver_register - register a phy_driver with the PHY layer + * @new_driver: new phy_driver to register + */ +int phy_driver_register(struct phy_driver *new_driver) +{ + int retval; + + new_driver->driver.name = new_driver->name; + new_driver->driver.bus = &mdio_bus_type; + new_driver->driver.probe = phy_probe; + new_driver->driver.remove = phy_remove; + + retval = driver_register(&new_driver->driver); + if (retval) { + pr_err("%s: Error %d in registering driver\n", + new_driver->name, retval); + + return retval; + } + + pr_debug("%s: Registered new driver\n", new_driver->name); + + return 0; +} +EXPORT_SYMBOL(phy_driver_register); + +int phy_drivers_register(struct phy_driver *new_driver, int n) +{ + int i, ret = 0; + + for (i = 0; i < n; i++) { + ret = phy_driver_register(new_driver + i); + if (ret) { + while (i-- > 0) + phy_driver_unregister(new_driver + i); + break; + } + } + return ret; +} +EXPORT_SYMBOL(phy_drivers_register); + +void phy_driver_unregister(struct phy_driver *drv) +{ + driver_unregister(&drv->driver); +} +EXPORT_SYMBOL(phy_driver_unregister); + +void phy_drivers_unregister(struct phy_driver *drv, int n) +{ + int i; + + for (i = 0; i < n; i++) + phy_driver_unregister(drv + i); +} +EXPORT_SYMBOL(phy_drivers_unregister); + +static struct phy_driver genphy_driver[] = { +{ + .phy_id = 0xffffffff, + .phy_id_mask = 0xffffffff, + .name = "Generic PHY", + .soft_reset = genphy_soft_reset, + .config_init = genphy_config_init, + .features = PHY_GBIT_FEATURES | SUPPORTED_MII | + SUPPORTED_AUI | SUPPORTED_FIBRE | + SUPPORTED_BNC, + .config_aneg = genphy_config_aneg, + .aneg_done = genphy_aneg_done, + .read_status = genphy_read_status, + .suspend = genphy_suspend, + .resume = genphy_resume, + .driver = { .owner = THIS_MODULE, }, +}, { + .phy_id = 0xffffffff, + .phy_id_mask = 0xffffffff, + .name = "Generic 10G PHY", + .soft_reset = gen10g_soft_reset, + .config_init = gen10g_config_init, + .features = 0, + .config_aneg = gen10g_config_aneg, + .read_status = gen10g_read_status, + .suspend = gen10g_suspend, + .resume = gen10g_resume, + .driver = {.owner = THIS_MODULE, }, +} }; + +static int __init phy_init(void) +{ + int rc; + + rc = mdio_bus_init(); + if (rc) + return rc; + + rc = phy_drivers_register(genphy_driver, + ARRAY_SIZE(genphy_driver)); + if (rc) + mdio_bus_exit(); + + return rc; +} + +static void __exit phy_exit(void) +{ + phy_drivers_unregister(genphy_driver, + ARRAY_SIZE(genphy_driver)); + mdio_bus_exit(); +} + +subsys_initcall(phy_init); +module_exit(phy_exit); |