diff options
Diffstat (limited to 'kernel/drivers/net/phy/et1011c.c')
-rw-r--r-- | kernel/drivers/net/phy/et1011c.c | 108 |
1 files changed, 108 insertions, 0 deletions
diff --git a/kernel/drivers/net/phy/et1011c.c b/kernel/drivers/net/phy/et1011c.c new file mode 100644 index 000000000..a90774381 --- /dev/null +++ b/kernel/drivers/net/phy/et1011c.c @@ -0,0 +1,108 @@ +/* + * drivers/net/phy/et1011c.c + * + * Driver for LSI ET1011C PHYs + * + * Author: Chaithrika U S + * + * Copyright (c) 2008 Texas Instruments + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/errno.h> +#include <linux/unistd.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/spinlock.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/mii.h> +#include <linux/ethtool.h> +#include <linux/phy.h> +#include <linux/io.h> +#include <linux/uaccess.h> +#include <asm/irq.h> + +#define ET1011C_STATUS_REG (0x1A) +#define ET1011C_CONFIG_REG (0x16) +#define ET1011C_SPEED_MASK (0x0300) +#define ET1011C_GIGABIT_SPEED (0x0200) +#define ET1011C_TX_FIFO_MASK (0x3000) +#define ET1011C_TX_FIFO_DEPTH_8 (0x0000) +#define ET1011C_TX_FIFO_DEPTH_16 (0x1000) +#define ET1011C_INTERFACE_MASK (0x0007) +#define ET1011C_GMII_INTERFACE (0x0002) +#define ET1011C_SYS_CLK_EN (0x01 << 4) + + +MODULE_DESCRIPTION("LSI ET1011C PHY driver"); +MODULE_AUTHOR("Chaithrika U S"); +MODULE_LICENSE("GPL"); + +static int et1011c_config_aneg(struct phy_device *phydev) +{ + int ctl = 0; + ctl = phy_read(phydev, MII_BMCR); + if (ctl < 0) + return ctl; + ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_SPEED1000 | + BMCR_ANENABLE); + /* First clear the PHY */ + phy_write(phydev, MII_BMCR, ctl | BMCR_RESET); + + return genphy_config_aneg(phydev); +} + +static int et1011c_read_status(struct phy_device *phydev) +{ + int ret; + u32 val; + static int speed; + ret = genphy_read_status(phydev); + + if (speed != phydev->speed) { + speed = phydev->speed; + val = phy_read(phydev, ET1011C_STATUS_REG); + if ((val & ET1011C_SPEED_MASK) == + ET1011C_GIGABIT_SPEED) { + val = phy_read(phydev, ET1011C_CONFIG_REG); + val &= ~ET1011C_TX_FIFO_MASK; + phy_write(phydev, ET1011C_CONFIG_REG, val\ + | ET1011C_GMII_INTERFACE\ + | ET1011C_SYS_CLK_EN\ + | ET1011C_TX_FIFO_DEPTH_16); + + } + } + return ret; +} + +static struct phy_driver et1011c_driver[] = { { + .phy_id = 0x0282f014, + .name = "ET1011C", + .phy_id_mask = 0xfffffff0, + .features = (PHY_BASIC_FEATURES | SUPPORTED_1000baseT_Full), + .flags = PHY_POLL, + .config_aneg = et1011c_config_aneg, + .read_status = et1011c_read_status, + .driver = { .owner = THIS_MODULE,}, +} }; + +module_phy_driver(et1011c_driver); + +static struct mdio_device_id __maybe_unused et1011c_tbl[] = { + { 0x0282f014, 0xfffffff0 }, + { } +}; + +MODULE_DEVICE_TABLE(mdio, et1011c_tbl); |